Microsoft RM-133X WCDMA2100/GSM Cellular Phone with BT User Manual R1108 en

Microsoft Mobile Oy WCDMA2100/GSM Cellular Phone with BT R1108 en

Contents

Manual 2

Download: Microsoft RM-133X WCDMA2100/GSM Cellular Phone with BT User Manual R1108 en
Mirror Download [FCC.gov]Microsoft RM-133X WCDMA2100/GSM Cellular Phone with BT User Manual R1108 en
Document ID923460
Application IDSFc3EuCFRrXfLvU0DSNgeQ==
Document DescriptionManual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize164.75kB (2059409 bits)
Date Submitted2008-04-03 00:00:00
Date Available2008-04-04 00:00:00
Creation Date2008-03-13 13:52:13
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2008-03-13 13:52:53
Document TitleR1108_en.book
Document CreatorPScript5.dll Version 5.2.2
Document Author: uriihine

Make calls
Voice calls
Tip! To increase or decrease the volume during a call,
use the volume key on the side of your device.
1 In the standby mode, enter the phone number,
including the area code. To remove a number, press .
For international calls, press
twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2 Press
to call the number.
3 Press
to end the call (or to cancel the call attempt).
Pressing
always ends a call, even if another
application is active.
To make a call from Contacts, press
, and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
. Select the call type Voice call.
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 75.
To call your voice mailbox (network service), press and hold
in the standby mode. See also ‘Call divert’, p. 123.
Tip! To change the phone number of your voice
mailbox, press
, and select Tools > Voice mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
Make calls
R1108_en.book Page 77 Wednesday, March 5, 2008 9:53 AM
To call a recently dialed number in the standby mode,
press
. Scroll to the number, and press
Make a conference call
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
77
Make calls
R1108_en.book Page 78 Wednesday, March 5, 2008 9:53 AM
Options > Conference > Add to conference to return
to the conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press
Speed dial a phone number
To activate speed dialing, press
, and select Tools >
Settings > Call > Speed dialling > On.
To assign a phone number to one of the speed dialing keys
—
), press
, and select Tools > Spd. dial. Scroll
to the key to which you want to assign the phone number,
and select Options > Assign.
is reserved for the
voice mailbox.
To call in the standby mode, press the speed dial key and
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
78
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Video calls
When you make a video call (network service), you can see
a real-time, two-way video between you and the recipient
of the call. The live video image, or video image captured
by the camera in your device is shown to the video call
recipient.
To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
service provider.
A video call can only be made between two parties. The
video call can be made to a compatible mobile device or an
ISDN client. Video calls cannot be made while another
voice, video, or data call is active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see ‘Call’, p. 116.
Even if you denied video sending during a video call, the
call is still charged as a video call. Check the pricing with
your service provider.
1 To start a video call, enter
the phone number in the
standby mode, or select
Contacts and a contact.
2 Select Options > Call >
Video call.
Make calls
R1108_en.book Page 79 Wednesday, March 5, 2008 9:53 AM
The secondary camera on the
front is used by default in
video calls. Starting a video
call may take a while.
Waiting for video image is
shown. If the call is not
successful (for example, video calls are not supported by
the network, or the receiving device is not compatible) you
are asked if you want to try a normal call or send a text or
multimedia message instead.
The video call is active when you see two video images,
and hear the sound through the loudspeaker. The call
recipient may deny video sending (
), in which case you
only hear the sound and may see a still image or a grey
background graphic.
79
Make calls
R1108_en.book Page 80 Wednesday, March 5, 2008 9:53 AM
To change between showing video or hearing only sound,
select Enable/Disable > Sending video, Sending audio or
Sending audio & video.
To zoom your own image, use the zoom keys to select
Zoom in or Zoom out. The zoom indicator is shown on the
top of the display.
To switch the places of the sent video images on the
display, select Change image order.
To end the video call, press
Video sharing
Use Video sharing (network service) to send live video or
a video clip from your mobile device to another
compatible mobile device during a voice call. Simply invite
a recipient to view the live video or a video clip you want
to share. Sharing begins automatically when the recipient
accepts the invitation.
The loudspeaker is active when you activate Video
sharing. If you do not want to use the loudspeaker for the
voice call while you share video, you can also use a
compatible headset. When a voice call is active, select
Options > Share video > Live or Clip.
To end video sharing, select Stop. Video sharing also ends
if the active voice call ends.
80
Video sharing requirements
Because Video sharing requires a UMTS connection, your
ability to use Video sharing depends on the UMTS network
availability. Contact your service provider for more
information on the service and network availability, and
fees associated with using this service.
To use Video sharing you must:
• Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p. 81.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 81. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. Starting Video sharing is not
possible when you are not within UMTS network
coverage (for example, in a GSM network).
• Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient’s device is turned
off, is not within UMTS network coverage, or does not
have Video sharing installed or person-to-person
connections set up, the recipient does not know that
you are sending an invitation. However, you receive an
error message that the recipient cannot accept the
invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible device. The SIP profile must also be established
to receive a sharing session.
Ask your service provider for the SIP profile settings, and
save them in your device. Your service provider may send
you the settings over the air or give you a list of the needed
parameters.
If you know a recipient’s SIP address, you can enter it on
the person’s contact card. Open Contacts from your device
main menu, and open the contact card (or start a new card
for that person). Select Options > Add detail > SIP or
Share view (the correct option depends on the network
operator). Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
If you do not know a SIP address for the contact, you can
also use the already saved phone number of the recipient
including the country code, for example +358, to share
video. If the phone number saved in Contacts does not
include the country code, you can enter the number
including the country code when sending the invitation.
UMTS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 117.
Make calls
R1108_en.book Page 81 Wednesday, March 5, 2008 9:53 AM
Share live video and video clips
To receive a sharing session, the device of the recipient
must support Video sharing and the recipient must
configure the required settings on their compatible mobile
device. You and the recipient must both be registered to
the service before you can start sharing.
Live video
1 When a voice call is active, select Options > Share
video > Live, and open the slide.
2 Your device sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
81
Make calls
R1108_en.book Page 82 Wednesday, March 5, 2008 9:53 AM
If the SIP address of the recipient is not available,
enter a SIP address. Select OK to send the invitation.
If you do not know a SIP address for the contact, enter
the phone number of the recipient including the
country code, if it is not already saved in the Contacts.
3 Sharing begins automatically when the recipient
accepts the invitation.
The loudspeaker is active. You can also use a
compatible headset for the voice call.
4 Select Pause to pause the sharing session. Select
Continue to resume sharing.
5 To end the sharing session, select Stop. To end the
voice call, press the end key.
To save the live video you shared, press Save to accept the
Save shared video clip? query. The shared video is saved
in the Images & video folder in Gallery.
Video clip
1 When a voice call is active, select Options > Share
video > Clip.
A list of video clips saved on the device memory or
compatible memory card opens.
2 Select a video clip you want to share. A preview view
opens. To preview the clip, select Options > Play.
3 Select Options > Invite.
You may need to convert the video clip into a suitable
format to be able to share it. Clip must be converted
for sharing. Continue? appears. Select OK.
82
The phone sends the invitation to the SIP address you
have added to the contact card of the recipient.
If the recipient has several SIP addresses in the contact
card, select the SIP address to which you want to send
the invitation, and Select to send the invitation.
If the SIP address of the recipient is not available, enter
a SIP address. Select OK to send the invitation.
If you do not know a SIP address for the contact, enter
the phone number of the recipient including the
country code, if it is not already saved in the Contacts.
Sharing begins automatically when the recipient
accepts the invitation.
Select Pause to pause the sharing session. Select
Options > Continue to resume sharing. To fast forward
or rewind the video clip, scroll up or down.
To play the clip again, press Play.
To end the sharing session, select Stop. To end the voice
call, press the end key.
If you access other applications while you are sharing a
video clip, the sharing is paused. To return to the video
sharing view and continue sharing, in the active standby
mode, select Options > Continue. See ‘Active standby
mode’, p. 110.
Accept an invitation
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your device is not set to Silent, it rings when
you receive an invitation.
If someone sends you a share invitation and your device is
turned off or you are not within UMTS network coverage,
you will not know that you received an invitation.
When you receive an invitation, select from the following:
Accept—to activate the sharing session.
Reject—to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press the end key to decline the sharing session and
disconnect the voice call.
When you are receiving a video clip, to mute the sound of
the clip, press Mute.
To end video sharing, select Stop. Video sharing also ends
if the active voice call ends.
Answer or decline a call
To answer the call, press
To mute the ringing tone when a call comes in, select
Silence.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see ‘Profiles—set tones’, p. 107.
If you do not want to answer a call, press
. If you have
activated the Call divert > Voice calls > If busy function
to divert calls, declining an incoming call also diverts the
call. See ‘Call divert’, p. 123.
When you decline an incoming call, you can send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can
edit the text before sending it. To set up this option and
write a standard text message, see ‘Call’, p. 116.
Make calls
R1108_en.book Page 83 Wednesday, March 5, 2008 9:53 AM
Answer or reject a video call
When a video call arrives,
is displayed.
Tip! You can assign a ringing tone for video calls.
Press
and select Profiles.
Press
to answer the video call. Allow video image to
be sent to caller? appears on the display. To start sending
live video, select Yes.
If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A grey
screen is shown in place of the video image. To replace the
grey screen with a still image captured by the camera in
your device, see ‘Call’, Image in video call, p. 116.
To end the video call, press
83
Make calls
R1108_en.book Page 84 Wednesday, March 5, 2008 9:53 AM
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
To answer the waiting call, press
on hold.
. The first call is put
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press
. To end both
calls, select Options > End all calls.
Send DTMF—to send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press
repeatedly. Select OK to send the
tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Options during a voice call
Options during a video call
Many of the options that you can use during a voice call
are network services. Select Options during a call for
some of the following options: Mute or Unmute, Answer,
Reject, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls, New call, Conference,
Transfer, and Open active standby. Select from the
following:
Select Options during a video call for the following
options: Enable or Disable (video, audio, or both), Activate
handset (if you have attached a compatible headset with
Bluetooth connectivity to the device, and want to route
the audio back to your device) or Activate handsfree (to
route the audio to a compatible headset with Bluetooth
connectivity you have attached to your device), Activate
loudsp., End active call, Open active standby, Use main
camera/Use secondary camera, Change image order,
Zoom in/Zoom out, and Help.
Replace—to end an active call and replace it by answering
the waiting call.
84
Send MMS (in UMTS networks only)—to send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press
to send the file to a
compatible device (network service).
The available options may vary.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press
, and select Applications >
Log > Recent calls. The device registers missed and
received calls only if the network supports these functions,
the device is switched on, and within the network service
area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ‘Phone and
SIM’, p. 120.
Packet data
Make calls
R1108_en.book Page 85 Wednesday, March 5, 2008 9:53 AM
To check the amount of data sent and received during
packet data connections, press
, and select
Applications > Log > Packet data. For example, you may
be charged for your packet data connections by the
amount of data sent and received.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor the approximate duration of your incoming and
outgoing calls, press
, and select Applications > Log >
Call duration.
To set the display of the call timers while a call is active,
select Applications > Log > Options > Settings > Show
call duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
85
Make calls
R1108_en.book Page 86 Wednesday, March 5, 2008 9:53 AM
To monitor all voice calls,
text messages, or data
connections registered by
the device, press
, select
Applications > Log, and
scroll right to open the
general log. For each
communication event, you
can see the sender or
recipient name, phone
number, name of the service
provider, or access point. You
can filter the general log to view just one type of event,
and create new contact cards based on the log
information.
Tip! To view a list of sent messages, press
select Messag. > Sent.
, and
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or Web pages are shown
as packet data connections.
To add an unknown phone number from Log to your
contacts, select Options > Add to contacts.
To filter the log, select Options > Filter and a filter.
86
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view the details of a communication event, in the
general log view scroll to an event, and press .
Tip! In the details view you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select Options > Copy Number.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
Web browsers
Services
Press
, and select Internet > Services (network
service).
Various service providers maintain pages specifically
designed for mobile devices that you can view with the
Services browser. These pages use the wireless markup
language (WML), extensible hypertext markup language
(XHTML), or hypertext markup language (HTML).
To view hypertext markup language (HTML) web pages on
the internet as originally designed, use Web instead. See
‘Web’, p. 90.
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
Shortcut: To start a connection, press and hold
in the standby mode.
Access point
To access pages, you need service settings for the page that
you want to use. You may receive the settings in a special
text message from the service provider that offers the
page. See ‘Data and settings’, p. 63. For more information,
contact your service provider.
Tip! Settings may be available on the Web site of a
service provider.
Web browsers
R1108_en.book Page 87 Wednesday, March 5, 2008 9:53 AM
Enter settings manually
, select Tools > Settings > Connection >
Access points, and define the settings for an access
point. Follow the instructions given to you by your
service provider. See ‘Connection’, p. 117.
2 Press
, and select Services > Options > Bookmark
manager > Add bookmark. Write a name for the
bookmark and the address of the page defined for the
current access point.
3 To set the created access point as the default access
point, select Options > Settings > Access point.
1 Press
Bookmarks view
The bookmarks view opens when you open Services.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other thirdparty sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or
87
Web browsers
R1108_en.book Page 88 Wednesday, March 5, 2008 9:53 AM
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
Browse
indicates the starting page defined for the default
access point.
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
Connection security
To download a page, select a bookmark, or enter the
address in the field ( ).
If the security indicator
is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Select Options > Details > Security to view details about
the connection, encryption status, and information about
server and user authentication.
Security certificates may be required for some services,
such as banking services. For more information, contact
your service provider. See also ‘Certificate management’,
p. 121.
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
To open links and make selections, press
Shortcut: Use
to jump to the end of a page and
to the beginning of a page.
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you visited during a browsing session.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Tip! To access the bookmarks view while browsing,
press and hold . To return to the browser view, select
Options > Back to page.
To save a page while browsing, select Options > Advanced
options > Save page. You can save pages to the device
88
memory or compatible memory card (if inserted), and
browse them when offline. To access the pages later, press
in the bookmarks view to open the Saved pages view.
To enter a new URL address, select Options > Navigation
options > Go to web address.
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
to the link, and press .
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session is
displayed. You can also view the list by selecting Options >
Downloads. In the list, scroll to an item, and select Options
to pause, resume, or cancel ongoing downloads, or open,
save, or delete completed downloads.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java VerifiedTM
testing.
1 To download the item, scroll to the link, and press .
2 Select the appropriate option to purchase the item, for
example, “Buy”.
Web browsers
R1108_en.book Page 89 Wednesday, March 5, 2008 9:53 AM
3 Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
End a connection
To end the connection and view the browser page offline,
select Options > Advanced options > Disconnect, or to
end the connection and close the browser, select
Options > Exit.
Empty the cache
Download and purchase items
The information or services you have accessed are stored
in the cache memory of the device.
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device, for example, a downloaded photo can be saved in
Gallery.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Advanced options > Clear cache.
89
Web browsers
R1108_en.book Page 90 Wednesday, March 5, 2008 9:53 AM
Settings
Select Options > Settings and from the following:
Access point—Change the default access point. See
‘Connection’, p. 117. Some or all access points may be
preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
Homepage—Define the home page.
Load imgs. & sounds—Select whether you want to load
images while browsing. If you select No, to load images
later during browsing, select Options > Show images.
Font size—Select the text size.
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—Enable or disable the receiving and sending of
cookies.
Conf. DTMF sending—Select whether you want to confirm
before the device sends DTMF tones during a voice call. See
also ‘Options during a voice call’, p. 84.
Java/ECMA script—Enable or disable the use of scripts.
Security warnings—Hide or show security notifications.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language.
Auto. bookmarks—Enable or disable automatic bookmark
collecting. If you want to continue collecting automatic
bookmarks but hide the folder from the bookmarks view,
select Hide folder.
Screen size—Select what is shown when you are
browsing: Select. keys only or Full screen.
Press
, and select Internet > Web (network service).
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
With Web you can view hypertext markup language
(HTML) web pages on the internet as originally designed.
You can also browse web pages that are designed
specifically for mobile devices, and use extensible
hypertext markup language (XHTML), or the wireless
markup language (WML).
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
With Web, you can zoom in and out on a page, use Mini
map and Page overview to navigate on pages, read web
Search page—Define a Web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
90
Web
feeds and blogs, bookmark web pages, and download
content, for example.
Check the availability of services, pricing, and fees with
your service provider. Service providers will also give you
instructions on how to use their services.
To access pages, you need service settings for the page that
you want to use. You may receive the settings in a special
text message from the service provider that offers the
page. See ‘Data and settings’, p. 63. For more information,
contact your service provider.
Mini map
You can use Mini map to view and search for information
on Web pages that contain large amount of information.
When Mini map is on, Web automatically zooms out and
shows an overview of the Web page you browse. To move
on the page, scroll right, left, up, or down. When you find
the desired information, stop scrolling, and Mini map
takes you to the desired spot. To set Mini map on, select
Options > Settings > Mini map > On.
Page overview
When you are browsing a web page that contains a large
amount of information, you can use Page overview to view
what kind of information the page contains.
To show the page overview of the current page, press
To find the desired spot on the page, press , ,
, or
. Press
again to zoom in and view the desired
section of the page.
Web feeds and blogs
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
Web browsers
R1108_en.book Page 91 Wednesday, March 5, 2008 9:53 AM
Web feeds are xml files in Web pages that are widely used
by the weblog community to share the latest entries'
headlines or their full text, for example, recent news. It is
common to find Web feeds on Web, Blog and Wiki pages.
To subscribe to a Web feed on Web pages, select Options
> Subscribe. To view the Web feeds you have subscribed
to, in the Web bookmarks view, select Web feeds.
Blogs or Weblogs are Web diaries. To download a Web
feed or blog on the Web, scroll to it, and press the scroll
key.
Browse
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
91
Web browsers
R1108_en.book Page 92 Wednesday, March 5, 2008 9:53 AM
To download a page, select a bookmark, and press the
scroll key. You can also enter the address in the field ( ).
Keyboard shortcuts
• Press to close the current window if two or more
windows are open.
• Press
to open your bookmarks.
• Press
to search for text in the current page.
• Press
to return to the previous page.
• Press
to list all open windows.
• Press
to show the page overview. Press
again
to zoom in and view the desired information.
• Press
to go to a different Web page.
• Press
to go to the start page.
To zoom the page in or out, press
or
To allow or prevent the automatic opening of multiple
windows, select Options > Settings > Block pop-ups >
Yes.
To view the Web pages you have visited during the current
browsing session, select Options > Navigation options >
History. To have the list of the previous pages
automatically shown when you return to the previous
page, select Options > Settings > History list > On.
92
End connection
To end the connection to the Web, select Options >
Advanced options > Disconnect.
To delete the information the network server collects
about your visits to various Web pages, select Options >
Advanced options > Delete cookies.
To empty the temporary memory that stores information
about your visits to different Web sites, select Options >
Advanced options > Clear cache.
Connections
Bluetooth connectivity
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and enhancements
such as headsets and car kits. You can use Bluetooth
connectivity to send images, video clips, music and sound
clips, and notes; connect wirelessly to your compatible PC
(for example, to transfer files); connect to a compatible
printer to print images with Image print. See ‘Image print’,
p. 34.
Since devices with Bluetooth wireless technology
communicate using radio waves, your device and the other
device do not need to be in direct line-of-sight. The two
devices only need to be within 10 meters (33 feet) of each
other, but the connection may be subject to interference
from obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Basic Printing Profile,
Dial-up Networking Profile, Headset Profile, Handsfree
Profile, Object Push Profile, File Transfer Profile, Basic
Imaging Profile, SIM Access profile, Synchronization
Profile, and Human Interface Device Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
Connections
R1108_en.book Page 93 Wednesday, March 5, 2008 9:53 AM
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example, the Handsfree Profile is used between the
handsfree device and the mobile device. For devices to
be compatible, they must support the same profiles.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Security’, p. 120 for more information
on locking the device.
93
Connections
R1108_en.book Page 94 Wednesday, March 5, 2008 9:53 AM
Settings
Press
, and select Tools > Bluetooth. When you open
the application for the first time, you are asked to define
a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth wireless
technology.
Select from the following:
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth
connectivity On, then establish a connection.
My phone's visibility—To allow your device to be found
by other devices with Bluetooth wireless technology,
select Shown to all. To hide it from other devices, select
Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
94
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See ‘Pair devices’, p. 95. Activate the remote
SIM mode from the other device.
When remote SIM mode is on in your Nokia N73, Remote
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by
in
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select Exit rem. SIM mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden. In this
way, you can better control who can find your device with
Bluetooth wireless technology, and connect to it.
Do not pair with an unknown device. In this way, you can
better protect your device from harmful content.
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
Bluetooth connectivity indicators
• When
is shown in the standby mode, Bluetooth
connectivity is on.
• When
is blinking, your device is trying to connect
with another device.
• When
is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options > Send > Via
Bluetooth.
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons:
computer, phone,
audio or
video device, and
other device.
To interrupt the search, select Stop.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 95.
5 When the connection has been established, Sending
data is shown.
Connections
R1108_en.book Page 95 Wednesday, March 5, 2008 9:53 AM
The Sent folder in Messaging does not store messages
sent using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To open the paired devices view (
application main view, press
), in the Bluetooth
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired
device. Devices with Bluetooth wireless technology within
range start to appear on the display. Select the device, and
enter the passcode. The same passcode must be entered
95
Connections
R1108_en.book Page 96 Wednesday, March 5, 2008 9:53 AM
on the other device as well. After pairing, the device is
saved to the paired devices view.
Paired devices are indicated by
in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select Options, and from the following:
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust.
indicates authorized devices in the paired
devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection to the device is
switched off.
96
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received through Bluetooth connectivity are indicated by
. See ‘Inbox—receive messages’, p. 62.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.
Infrared connection
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device. See also ‘Modem’, p. 98.
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
Send and receive data using infrared
1 Make sure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to 1
meter (3 feet).
2 The user of the receiving device activates the infrared
port.
To activate the infrared port of your device to receive
data through infrared, press
, and select Tools >
Infrared.
3 The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file in
an application or the file manager, and select
Options > Send > Via infrared.
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
and must be started again.
All items received through infrared are placed in the Inbox
folder in Messaging. New infrared messages are indicated
by
When
is shown continuously, the infrared
connection is active, and your device is ready to send and
receive data using its infrared port.
Data cable
Connections
R1108_en.book Page 97 Wednesday, March 5, 2008 9:53 AM
Press
, and select Tools > Data cbl.. In Data cable
mode, select what the USB data cable connection is used
for: Media Player, PC Suite, Image print or Mass storage.
To have the device ask the purpose of the connection each
time a compatible data cable is connected, select Ask on
connection.
PC connections
You can use your device with a variety of compatible PC
connectivity and data communications applications. With
Nokia PC Suite you can, for example, transfer images
between your device and a compatible PC.
Always create the connection from the PC to synchronize
with your device.
When
blinks, your device is trying to connect to the
other device or a connection has been lost.
97
Connections
R1108_en.book Page 98 Wednesday, March 5, 2008 9:53 AM
Modem
You can use your device as a modem to connect to the
Internet with a compatible PC.
Press
and select Tools > Modem.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite.
Before you can use your device as a modem, you must do
the following:
• Install the appropriate data communications
software on your PC.
• Subscribe to the appropriate network services from
your service provider or Internet service provider.
• Have the appropriate drivers installed on your PC.
You must install drivers for a connection through a
compatible USB data cable, and you may need to
install or update Bluetooth connectivity or infrared
drivers.
Press
, and select Tools > Conn. mgr.. To view the
status of data connections or end connections in GSM and
UMTS network, select Act. data conn..
To connect your device to a compatible PC using infrared,
press the scroll key. Make sure that the infrared ports of
your device and PC are directly facing each other, and that
there are no obstructions between the devices. See
‘Infrared connection’, p. 96
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Note that you may not be able to use some of the other
communication features, when the device is used as a
modem.
98
Detailed installation instructions can be found in the user
guide for Nokia PC Suite.
Connection manager
Data connections
In the active connections view, you can see the open data
connections: data calls ( ), and packet data connections
( or ).
To end a connection, select Options > Disconnect. To close
all open connections, select Options > Disconnect all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Synchronization
Press
, and select Tools > Sync. Sync enables you to
synchronize your notes, calendar, or contacts with various
compatible calendar and contacts applications on a
compatible computer or on the Internet. You can also
create or edit synchronization settings.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 63.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles. A synchronization profile
contains the necessary settings, for example which
applications are synchronized, to synchronize data in your
device with a remote database on a server or compatible
device.
1 Select a synchronization profile and Options >
Synchronise. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is complete.
Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Connections
R1108_en.book Page 99 Wednesday, March 5, 2008 9:53 AM
Device manager
Software updates
You may view and update the current software version of
your device, and check the date of a possible previous
update (network service).
Press
and select Tools > Device mgr..
To check whether software updates are available, select
Options > Check for updates. Select an internet access
point when asked.
If an update is available, information about it is displayed.
Select Accept to accept to download the update or Cancel
to cancel the download. The download may take several
minutes. You can use your device during the download.
99
Connections
R1108_en.book Page 100 Wednesday, March 5, 2008 9:53 AM
The downloading of software updates may involve the
transfer of large amounts of data. Contact your service
provider for information on charges for data
transmissions.
Ensure that the battery of your device has enough power
or connect the charger before you start the update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to backup data before accepting
the installation of an update.
When the download is complete, select Yes and then
Accept to install the update, or No to install it later by
using Options >Install update. The installation may
take several minutes.
The device updates the software and restarts. To
complete the update, select OK. When asked, select an
internet access point. Your device sends the software
update status to the server.
To view the server profile settings used for software
updates, select Options >Settings.
Server profiles
Press
, and select Tools > Device mgr., and press
. You may receive server profiles and different
100
configuration settings from your service providers, or
company information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
To create a new server profile, select Options > New
server profile. To edit a server profile, select Options >
Edit profile.
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all requests—If you want your device to ask
for confirmation before accepting a configuration from the
server, select No.
Connections
R1108_en.book Page 101 Wednesday, March 5, 2008 9:53 AM
Network authentication—Select if network
authentication is used.
Network user name and Network password—Enter your
network user name and password to identify your device to
the server. These options are shown only if network
authentication is used.
101
Office
R1108_en.book Page 102 Wednesday, March 5, 2008 9:53 AM
Office
Calculator
Set base currency and exchange rates
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must select
a base currency and add exchange rates. The rate of the
base currency is always 1.
To add, subtract, multiply, divide, and calculate square
roots and percentages, press
, and select Office >
Calculator.
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Converter
To convert measures from one unit to another, press
and select Office > Converter.
Notes
Converter has limited accuracy, and rounding errors may
occur.
1 In the Type field, select the measure you want to use.
2 In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
which you want to convert.
3 In the first Amount field, enter the value you want to
convert. The other Amount field changes
automatically to show the converted value.
102
To write notes, press
, and select Office > Notes. You
can send notes to compatible devices, and save plain text
files (.txt format) that you receive to Notes.
To print a note on a compatible Basic Print Profile (BPP)
equipped printer with Bluetooth connectivity (such as HP
Deskjet 450 Mobile Printer or HP Photosmart 8150), select
Options > Print.
Recorder
To record voice memos, press
, and select Office >
Recorder. To record a telephone conversation, open Voice
recorder during a voice call. Both parties hear a tone every
5 seconds during recording.
Quickword supports the viewing of documents saved in
.doc format from Microsoft Word 97 or later. Not all
variations or features of the mentioned file formats are
supported.
Office
R1108_en.book Page 103 Wednesday, March 5, 2008 9:53 AM
See also ‘More information’, p. 104.
View Word documents
To move in the document, use the scroll key.
Quickoffice
To search the document for text, select Options > Search.
You can also select Options and from the following:
To use the Quickoffice applications, press
, and select
Office > Quickoffice. A list of files in the .doc, .xls, and
.ppt file formats saved on your device in the
C:\Data\Documents and the E:\Documents folder and
subfolders on the memory card opens.
To open a file in its respective application, press
files, select Options > Sort files.
Go to—to move to the start, end, or selected position
within the document
Zoom—to zoom in or out
Start Autoscroll—to start automatic scrolling through the
document. To stop scrolling, press .
. To sort
Quicksheet
To open Quickword, Quicksheet, or Quickpoint, press
to reach the desired view.
With Quicksheet, you can read Microsoft Excel files on
the display of your device.
Quickword
Quicksheet supports the viewing of spreadsheet files
saved in .xls format from Microsoft Excel 97 or later. Not
all variations or features of the mentioned file formats are
supported.
With Quickword, you can view native Microsoft Word
documents on the display of your device. Quickword
supports colors, bold, italics, and underline.
See also ‘More information’, p. 104.
103
Office
R1108_en.book Page 104 Wednesday, March 5, 2008 9:53 AM
View spreadsheets
See also ‘More information’, p. 104.
To move around in the spreadsheet, use the scroll key.
View presentations
To switch between worksheets, select Options >
Worksheet.
To move between the slide, outline, and the notes view,
press
or
Pan—to navigate within the current worksheet by blocks.
A block contains columns and rows displayed by a screen.
To display the columns and rows, use the scroll key to
select a block and OK.
To move to the next or previous slide in the presentation,
press
or .
To search the speadsheet for a text within a value or
formula, select Options > Find.
To change how the spreadsheet is displayed, select
Options and from the following:
Zoom—to zoom in or out
Freeze panes—to keep the highlighted row, column, or
both visible while you move in the spreadsheet
Resize—to adjust the size of columns or rows
Quickpoint
With Quickpoint, you can view Microsoft PowerPoint
presentations on the display of your device.
Quickpoint supports the viewing of presentations created
in .ppt format from Microsoft PowerPoint 2000 or later.
Not all variations or features of the mentioned file
formats are supported.
104
To view the presentation in full screen, select Options >
Full screen.
To expand items in the presentation outline in the outline
view, select Options > Outline > Expand entry.
More information
If you experience problems with Quickword, Quicksheet,
or Quickpoint, visit www.quickoffice.com for more
information. Support is also available by sending an e-mail
to supportS60@quickoffice.com.
Adobe Reader
With Adobe Reader you can read PDF documents on the
display of your device.
This application has been optimized for PDF document
content on handsets and other mobile devices, and
provides only a limited set of features compared with PC
versions.
To access and open documents:
• Press
, and select Office > Adobe PDF. Select
Options > Browse for file to browse and open
documents stored in the device memory and on a
compatible memory card.
• Open an e-mail attachment from received e-mail
messages (network service).
• Send a document using Bluetooth connectivity to your
Inbox in Messaging.
• Use File manager to browse and open documents
stored in the device memory and on the memory card.
• Browse Web pages. Ensure your device is set up with an
Internet access point before browsing. See ‘Access
points’, p. 118.
Manage PDF files
To browse and manage PDF files, press
, and select
Office > Adobe PDF. Your recent files are listed in the file
view. To open a document, scroll to it, and press .
You can also select Options and from the following:
Browse for file—to browse for PDF files in the device
memory or on a compatible memory card.
Settings—to modify default zoom level and viewing mode
of PDF documents.
View PDF files
Office
R1108_en.book Page 105 Wednesday, March 5, 2008 9:53 AM
When a PDF file is open, select Options and one of the
following:
Zoom—to zoom in, out, or to a selected percentage. You
can also resize the document to the screen width, or fit
the whole PDF page to the screen.
Find—to search the document for a text.
View—to view the document in full screen. You can also
rotate the PDF document by 90 degrees in either direction.
Go to—to move to a selected page, next page, previous
page, first page, or last page.
Save—to save the file to device memory or a compatible
memory card.
Settings—to modify default zoom level and default
viewing mode.
Details—to display the properties of the PDF document.
More information
For more information, visit www.adobe.com.
105
Office
R1108_en.book Page 106 Wednesday, March 5, 2008 9:53 AM
106
To share questions, suggestions, and information about
the application, visit the Adobe Reader for Symbian OS
user forum at http://adobe.com/support/forums/
main.html.
Personalize your device
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 110.
• To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your device’,
p. 109.
• To customize the ringing
tones, see ‘Profiles—set
tones’, p. 107 and ‘Add
ringing tones for
contacts’, p. 76.
• To change the shortcuts
assigned for the different
presses of the scroll key and left and right selection
keys in the standby mode, see ‘Standby mode’, p. 115.
• To change the clock shown in the standby mode, press
, and select Applications > Clock > Options >
Settings > Clock type > Analogue or Digital.
• To change the welcome note to an image or animation,
press , and select Tools > Settings > Phone >
General > Welcome note / logo.
• To change the main menu view, in the main menu,
select Options > Change view > Grid or List.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
Personalize your device
R1108_en.book Page 107 Wednesday, March 5, 2008 9:53 AM
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
To change the profile, press
in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press
to
open the choices. Tones stored on a compatible memory
card are indicated with
. You can scroll through the
tone list and listen to each one before you make your
selection. To stop the sound, press any key.
107
Personalize your device
R1108_en.book Page 108 Wednesday, March 5, 2008 9:53 AM
When you choose a tone, Tone downloads (network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a Web page to
download tones.
If you want the caller’s name to be said when your device
rings, select Options > Personalise, and set Say caller's
name to On. The caller’s name must be saved in Contacts.
3-D tones
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by
in the signal
strength indicator area. All wireless RF signals to and from
the device are prevented. If you try to send messages, they
are placed in the outbox to be sent later.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
To leave the Offline profile, press the power key, and
select another profile. The device re-enables wireless
108
transmissions (providing there is sufficient signal
strength). If Bluetooth connectivity is activated before
entering the Offline profile, it will be deactivated.
Bluetooth connectivity is automatically reactivated after
leaving the Offline profile. See ‘Settings’, p. 94.
Press , and select Tools > 3-D tones. With 3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, scroll to the
ringing tone that is displayed, press , and select the
desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed—Select the speed at which sound moves
from one direction to another. This setting is not available
for all effects in Sound trajectory.
Reverberation—To adjust the amount of echo, select the
desired effect in the list.
Doppler effect—Select On to have the ringing tone sound
higher when you are closer to your device, and lower when
you are farther away. When you get closer to the device,
the ringing tone appears to become higher, and lower
when you move away from it. This setting is not available
for all effects in Sound trajectory.
To listen to the ringing tone with the 3–D effect, select
Options > Play tone
without the memory card, save the themes in the device
memory first.
To open a browser connection and download more
themes, select Theme downloads (network service).
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
If you enable the 3-D tones but do not select any 3-D
effect, stereo widening is applied to the ringing tone.
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options > Preview.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing volume.
To edit themes, scroll to a theme, and select Options >
Edit to change the Wallpaper and Power saver settings.
Change the look of your
device
Personalize your device
R1108_en.book Page 109 Wednesday, March 5, 2008 9:53 AM
To restore the selected theme to its original settings,
select Options > Restore orig. theme when you edit a
theme.
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
theme is indicated by
. In Themes you can group
together elements from other themes or select images
from the Gallery to personalize themes further. The
themes on a compatible memory card (if inserted) are
indicated by
. The themes on the memory card are not
available if the memory card is not inserted in the device.
If you want to use the themes saved in the memory card
109
Personalize your device
R1108_en.book Page 110 Wednesday, March 5, 2008 9:53 AM
Active standby mode
Use your standby display for
fast access to your most
frequently used applications.
By default, the active
standby mode is on.
Press , select Tools >
Settings > Phone >
Standby mode > Active
standby, and press
to
switch the active standby on
or off.
The active standby display is
shown with default applications across the top of the
screen, and calendar, to-do, Print Basket, and player
events listed below.
Scroll to an application or event, and press
The standard scroll key shortcuts available in the standby
mode cannot be used when the active standby mode is on.
To change the default applications’ shortcuts, press ,
select Tools > Settings > Phone > Standby mode >
Active standby apps., and press .
Some shortcuts may be fixed, and you are not able to
change them.
110
R1108_en.book Page 111 Wednesday, March 5, 2008 9:53 AM
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 78.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice comm.
application and its Profiles folder. Press
, and select
Tools > Voice cm. > Profiles; the device creates voice tags
for the applications and profiles. To use enhanced voice
commands, press and hold
in the standby mode, and
say a voice command. The voice command is the name of
the application or profile displayed in the list.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
Tools
Tools
recognized voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Reset voice adapts..
Application manager
Press
, and select Tools > App. mgr.. You can install
two types of applications and software to your device:
• J2ME applications based on Java technology with the
extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia N73. Software
providers will often refer to the official model number
of this product: the Nokia N73-1.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
111
Tools
R1108_en.book Page 112 Wednesday, March 5, 2008 9:53 AM
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a compatible memory card (local disk).
Install applications and software
indicates a .sis application,
a Java application,
that the application is not fully installed, and
that the application is installed on the memory card.
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
VerifiedTM testing.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
• To display the security certificate details of the
application, select Options > View certificate. See
‘Certificate management’, p. 121.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original
installation file or a full back-up copy of the removed
software package. To restore the original application,
remove the application, and install the application
112
again from the original installation file or the back-up
copy.
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1 To locate an installation file, press
, and select
Tools > App. mgr.. Alternatively, search the device
memory or a compatible memory card (if inserted) in
File manager, or open a message in Messag. > Inbox
that contains an installation file.
2 In App. manager, select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press .
To start a network connection and to view extra
information about the application, select Options > Go to
web address, if available.
To see what software packages are installed or removed
and when, select Options > View log.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
Installation files (.sis) of applications that are stored in the
device memory will remain in the memory after the
application has been installed to a compatible miniSD
card. Stored installation files may consume large amounts
of device memory, leaving insufficient memory to store
new applications, messages and other files. To help prevent
this, first backup the installation file to a compatible PC
using Nokia PC Suite, then remove the installation file
from the device memory using File manager (see ‘File
manager’, p. 15).
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
package, you may no longer be able to open documents
created with that software.
If another software package depends on the software
package that you removed, the other software package
may stop working. Refer to the documentation of the
installed software package for details.
Tools
R1108_en.book Page 113 Wednesday, March 5, 2008 9:53 AM
Settings
Select Options > Settings and from the following:
Software installation—Select Signed only to only install
applications with verified digital signatures.
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components.
In the App. manager main view, scroll to an application,
and select Options > Suite settings to change settings
related to that specific application.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
113
Tools
R1108_en.book Page 114 Wednesday, March 5, 2008 9:53 AM
Digital Rights Management
Content owners may use different types of digital rights
management technologies (DRM) to protect their
intellectual property including copyrights. This device
uses various types of DRM software to access DRM
protected content. With this device you can access
content protected with OMA 1.0 and OMA 2.0. If certain
DRM software fails to protect the content, content
owners may ask that such DRM software's ability to
access new DRM-protected content be revoked.
Revocation may also prevent renewal of such DRMprotected content already in your device. Revocation of
such DRM software does not affect the use of content
protected with other types of DRM or the use of nonDRM-protected content.
Digital rights management (DRM) protected content
comes with an associated activation key that defines your
rights to use the content.
If your device has OMA DRM protected content, to back
up both the activation keys and the content, use the
backup feature of Nokia PC Suite. Other transfer methods
may not transfer the activation keys which need to be
restored with the content for you to be able to continue
the use of OMA DRM protected content after the device
memory is formatted. You may also need to restore the
114
activation keys in case the files on your device get
corrupted.
To view the digital rights activation keys stored in your
device, press
, and select Tools > Actv. keys and from
the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Not in use—View keys that have no media files connected
to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Get activation key. Activation keys cannot be updated if
Web service message reception is disabled. See ‘Web
service messages’, p. 64.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
Settings
To change settings, press
, and select Tools > Settings.
To open a settings group, press . Scroll to a setting you
want to change, and press .
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Some settings may be preset for the device by your service
provider, and you may not be able to change them.
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Phone
General
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Settings
R1108_en.book Page 115 Wednesday, March 5, 2008 9:53 AM
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 120. After resetting, the
device may take a longer time to power on. Documents
and files are unaffected.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 110.
Left selection key—Assign a shortcut to the left selection
key (
) in the standby mode.
115
Settings
R1108_en.book Page 116 Wednesday, March 5, 2008 9:53 AM
Right selection key—Assign a shortcut to the right
selection key (
) in the standby mode.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Display
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your service
provider when you make a subscription (Set by network)
(network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Light sensor—Press
or
to change the light sensor
mode, and to brighten or darken the display.
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 83.
Power saver time-out—Select the time-out period after
which the power saver is activated.
Message text—Write a text to be sent in a text message
when you reject a call.
Sleep mode—Select whether the display is switched off to
save battery power 20 minutes after the power saver is
activated. When the display is switched off, a LED blinks
to indicate that the device is powered on.
Image in video call—If video is not sent during a video call,
you can select a still image to be displayed instead.
Light time-out—Scroll left or right to decrease or
increase the time the lights stay on after your last
keypress.
116
Call
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
Speed dialling—Select On, and the numbers assigned to
the speed dialing keys (
) can be dialed by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 78.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, and
Line in use—This setting (network service) is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection
Data connections and access points
Settings
R1108_en.book Page 117 Wednesday, March 5, 2008 9:53 AM
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
and connect to the Internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
117
Settings
R1108_en.book Page 118 Wednesday, March 5, 2008 9:53 AM
Access points
Packet data
You may receive access point settings in a message from
a service provider. See ‘Data and settings’, p. 63. Some or
all access points may be preset for your device by your
service provider, and you may not be able to change,
create, edit, or remove them.
indicates a protected
access point, and
indicates a packet data access point.
Follow the instructions from your service provider.
To create a new access point, select Options > New
access point. Select Use default settings to use the
default access point settings, or Use existing settings to
select an existing access point as the basis for the new
access point.
To edit the settings of an access point, select Options >
Edit. Follow the instructions from your service provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can
be left empty, unless you have been instructed otherwise
by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
118
Access point name—You obtain the access point name
from your service provider.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are setting
up, enter the Web address or the address of the multimedia
messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the Internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary DNS address, enter the IP
address of the primary DNS server. In Secondary DNS
addr., enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When needed, the device uses a
packet data connection only if you start an application or
action that needs it.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your service
provider in a configuration message, or the settings may be
stored on your (U)SIM card. You can save these settings to
your device, view, or delete them in Configs..
SIP settings
Settings
R1108_en.book Page 119 Wednesday, March 5, 2008 9:53 AM
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP, such as video sharing.
You may receive the settings in a special text message
from your service provider. You can view, delete, or create
these setting profiles in SIP settings.
Data call
The data call settings affect all access points using a GSM
data call connection.
Online time—Set the data calls to disconnect
automatically after a time-out if there is no activity. To
enter a time-out, select User defined, and enter the time
in minutes. If you select Unlimited, data calls are not
disconnected automatically.
Date and time
See ‘Clock settings’, p. 55, and language settings in
‘General’, p. 115.
119
Settings
R1108_en.book Page 120 Wednesday, March 5, 2008 9:53 AM
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See ‘Glossary of PIN
and lock codes’, p. 120.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of
these codes, contact your service provider. See ‘Glossary
of PIN and lock codes’, p. 120.
. A list of
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Glossary of PIN and lock codes
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to
the official emergency number programmed into your
device.
120
Tip! To lock the device manually, press
commands opens. Select Lock phone.
If you forget any of these codes, contact your service
provider.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorized
use. The factory setting for the lock code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press
to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Settings
R1108_en.book Page 121 Wednesday, March 5, 2008 9:53 AM
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
View certificate details—check authenticity
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
121
Settings
R1108_en.book Page 122 Wednesday, March 5, 2008 9:53 AM
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is
checked, and one of the following notes may be displayed:
• Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the
trust settings’, p. 122.
• Expired certificate—The period of validity has ended
for the selected certificate.
• Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
• Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is
shown. For example:
122
• Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
• Internet: Yes—The certificate is able to certify servers.
• App. installation: Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
Track protected object
Some copyright-protected music files may include a
transaction identifier. Select whether you allow the
identifier to be sent with the music file if you send or
forward the file. The provider of the music file can use the
identifier to track the distribution of the files.
Security module
To view or edit a security module (if available) in Secur.
mod., scroll to it, and press the scroll key. To view detailed
information about a security module, scroll to it, and select
Options > Security details.
Call divert
Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number is
busy or when you reject incoming calls, select If busy. Set
the option on (Activate) or off (Cancel), or check whether
the option is activated (Check status).
Several diverting options can be active at the same time.
When all calls are diverted,
is shown in the
standby mode.
Call barring and call diverting cannot be active at the same
time.
Call barring
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
Settings
R1108_en.book Page 123 Wednesday, March 5, 2008 9:53 AM
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls may be possible to the official
emergency number programmed into your device.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with
Network mode (shown only if supported by the network
operator)—Select which network to use. If you select Dual
mode, the device uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select Automatic to set the device
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
123
Settings
R1108_en.book Page 124 Wednesday, March 5, 2008 9:53 AM
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more wireless service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement
In the standby mode,
indicates a compatible headset
is connected, and
that the headset is unavailable, or
a Bluetooth connection to a headset is lost.
indicates
a compatible loopset is connected and
that a
compatible Text phone is connected.
Select Headset, Loopset, Text phone, Bluetooth
handsfree, or Car kit and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See ‘Profiles—set tones’, p. 107.
124
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
Text phone.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
If you are using a Text phone, you must activate it on your
device. Press
, and select Tools > Settings >
Enhancement > Text phone > Use text phone > Yes.
If the device does not identify the enhancement
automatically, select Enhancement in use and from the
list the enhancement you use.
Troubleshooting: Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock
code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network operator.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), or service provider.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Scroll to the application, and press
to close the
application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
A: If another device is connected to your device, you can
either end the connection by using the other device or by
deactivating Bluetooth connectivity. Select Tools >
Bluetooth > Off.
Browser services
Q: What do I do if the following message is displayed: No
access points defined. Define now?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Troubleshooting: Q&A
R1108_en.book Page 125 Wednesday, March 5, 2008 9:53 AM
Camera
Q: Why do images look smudgy?
A: Remove the protective plastic films covering the display
and camera. Ensure that the camera lens protection
window is clean.
Q: Why do I get an error message “Application already in use”
when I try to activate the camera?
A: The camera application may be active in the background.
To check whether the camera is active or not, press and
hold
. The application switching window opens. If the
camera is active, to return to the camera, scroll to it on the
list, and press the scroll key. To close the camera
application, press .
Q: Why can’t I end a Bluetooth connection?
125
Troubleshooting: Q&A
R1108_en.book Page 126 Wednesday, March 5, 2008 9:53 AM
Display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select Applications > Log > Options > Filter >
All communication. Also if you change the (U)SIM card,
the log information is cleared.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and videos in Gallery
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes is shown: Not
126
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Installation files (.sis) of applications that are stored in the
device memory remain in the memory after the application has
been installed to a compatible miniSD card. Remove such
installation files from the device memory. To do this, first
backup the installation file to a compatible PC using Nokia PC
Suite, then remove the installation file from the device
memory using File manager (see ‘File manager’ , p. 15).
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
• Use Nokia PC Suite to make a backup copy of all data to a
compatible computer.
• Send images to your e-mail address, then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the contact
card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File mgr. > Options > Memory details.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messag. > Options >
Settings > Multimedia message.
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming
fax calls to another phone number.
Troubleshooting: Q&A
R1108_en.book Page 127 Wednesday, March 5, 2008 9:53 AM
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, select
Messag. > Options > Settings > Multimedia message >
Multimedia retrieval > Off. After this change, the device
does not make any network connections related to
multimedia messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the user guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
127
Battery information
R1108_en.book Page 128 Wednesday, March 5, 2008 9:53 AM
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The battery
can be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger, and then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave fully charged battery connected
to a charger, since overcharging may shorten its lifetime. If
left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
128
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact with
the skin or eyes. In the event of such a leak, flush your skin or
eyes immediately with water, or seek medical help.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it from
an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1 When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
2 When you angle the hologram left,
right, down, and up, you should
see 1, 2, 3, and 4 dots on each side
respectively.
3 Scratch the side of the label to
reveal a 20-digit code, for
example
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
Battery information
R1108_en.book Page 129 Wednesday, March 5, 2008 9:53 AM
4 Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
To create a text message, enter the
20-digit code, for example,
12345678919876543210, and send
to +44 7786 200276.
To create a text message,
• For countries in Asia Pacific, excluding India: Enter the
20-digit code, for example, 12345678919876543210, and
send to +61 427151515.
• For India only: Enter Battery followed by the 20-digit
battery code, for example, Battery
12345678919876543210, and send to 5555.
National and international operator charges will apply.
You should receive a message indicating whether the code
can be authenticated.
129
Battery information
R1108_en.book Page 130 Wednesday, March 5, 2008 9:53 AM
130
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed
in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as
contacts and calendar notes) before sending your device
to a service facility.
• To reset the device from time to time for optimum
performance, power off the device, and remove the
battery.
Care and maintenance
R1108_en.book Page 131 Wednesday, March 5, 2008 9:53 AM
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorized service facility for
service.
131
Additional safety information
R1108_en.book Page 132 Wednesday, March 5, 2008 9:53 AM
Additional safety information
Small children
Medical devices
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Operating environment
Remember to follow any special regulations in force in any
area, and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least 2.2
centimeters (7/8 inches) from the body. When a carry case,
belt clip, or holder is used for body-worn operation, it should
not contain metal and should position the device the abovestated distance from your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is
completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
132
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 15.3 centimeters (6 inches) be
maintained between a wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research. Persons with pacemakers should:
• always keep the device more than 15.3 centimeters (6
inches) from their pacemaker;
• not carry the device in a breast pocket;
• hold the device to the ear opposite the pacemaker to
minimize the potential for interference.
If you suspect interference, switch off your device, and move
the device away.
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative, of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Additional safety information
R1108_en.book Page 133 Wednesday, March 5, 2008 9:53 AM
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
133
Additional safety information
R1108_en.book Page 134 Wednesday, March 5, 2008 9:53 AM
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2 Press the end key as many times as needed to clear the
display and ready the device for calls.
3 Enter the official emergency number for your present
location. Emergency numbers vary by location.
4 Press the call key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. If the
device is in the offline profile mode, you may need to change
the profile to activate the phone function before you can
make an emergency call. Consult this guide or your service
provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio
waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
134
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 1.16 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements
for exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this
standard during product certification for use at the ear is
1.28 W/kg and when properly worn on the body is 0.69 W/kg.
R1108_en.book Page 135 Wednesday, March 5, 2008 9:53 AM
Index
access points 117, 118
accessories
See enhancements
activation keys
See digital rights management
active standby mode 110
alarm clock 55
application manager 111
applications
installing 112
Java 111
removing 113
audio,file formats 39
batteries
authenticating 129
charging 11, 128
intended for use 9
bitrates 47
Bluetooth
connectivity 93
device address 95
headset 124
indicators 13, 95
pairing 95
security 94
sending data 95
settings 94
switching off 96
transferring content 11
bookmarks 87
browse Internet 88
cache, clearing 89
calculator 102
calendar
creating entries 56
deleting entries 57
settings 57
synchronizing Nokia PC Suite 56
call log
See log
calls
answering 83
barring 123
declining 83
diverting 123
duration 85
international 77
making 77
missed 85
options 84
received 85
settings 116
share video 80
transferring 84
waiting 84
camera
active toolbar 20
adjusting lighting and color 23
editing videos 32
flash 23
image setup settings 23
saving video clips 25
scenes 24
self-timer 24
sequence mode 24
still image camera settings 22
video recorder settings 26
cell broadcast 70
certificates 121
chargers 9
135
R1108_en.book Page 136 Wednesday, March 5, 2008 9:53 AM
chat
See instant messaging
clock 55
codecs 47
codes 120
computer connections 97
conference call 77
connection manager 98
connection settings 117
contact cards
contacts 74
inserting pictures 74
sending 74
storing DTMF tones 84
contact information 17
converter 102
copying
contacts between the SIM card
and device memory 75
files to a folder 15
files to a memory card 28
phone numbers to clipboard 86
copyright protection
See digital rights management
data cable 97
data call, settings 119
data connections
136
details 98
ending 98
establishing 117
indicators 12
network 8, 123
settings 117
date 55
delivery reports
denying 68
erasing 86
receiving 68
device manager 99
dictionary 59
digital certificates
See certificates
digital rights management 114
Download! 16
DRM
See digital rights management
EDGE 13
edit images 31
editing videos 32
e-mail
automatic retrieving 65
creating 58
deleting messages 65
opening 65
remote mailbox 64
retrieving from mailbox 64
saving 70
sending 61
settings 68
viewing attachments 65
writing 60
emergency calls 8, 133
enhancements 9, 124
file formats
.jad 111
.jar 111, 112
.sis 111
music player 39
RealPlayer 51
file manager 15
fixed dialing 76
Flash Player 48
FM radio 49
gallery 28
active toolbar 29
edit images 31
free memory 30
ordering files in albums 30, 36
presentations 33
R1108_en.book Page 137 Wednesday, March 5, 2008 9:53 AM
print basket 30
print images 34
slide show 33
GPRS
See data connections
GSM
data connections 117
network 8, 123
sending instant messages 72
Internet
See Web
Internet access points (IAP)
See access points
hands-free operation
See loudspeaker
help application 17
idle sceen
See standby mode
image print 34
indicators 12
infrared
connection 96
indicator 13
transferring content 11
using modem 98
installing applications 111
instant messaging
blocking 72
connecting to a server 71
recording messages 72
Java
See applications
Kbps 47
language settings 115
LED 116
lock code 121
log
erasing contents 86
filtering 86
transfer log 12
log duration 86
loopset settings 124
loudspeaker 13
mailbox 64
maintenance 131
media files
file formats 39, 51
memory
clearing memory 16, 85
viewing memory consumption 16
memory card tool 14
menu, rearranging 107
messaging
cell broadcast 70
e-mail 61
inbox 62
mailbox 64
multimedia messages 60
settings 66
text messages 60
miniSD cards 14
missed calls 85
MMS
See multimedia messages
modem 98
movie director 52
movies, muvees
custom muvees 53
quick muvees 52
multimedia key (Nokia N73 (original
edition)) 14
multimedia messages
creating 58
receiving 62
retrieving 63
saving 70
137
R1108_en.book Page 138 Wednesday, March 5, 2008 9:53 AM
sending 60
settings 67
music
album art 47
as ringing tones 47
details 46
file formats 39
transfering 41
music access key (Nokia N73 Music
Edition) 39
music player 39
equalizer 40
file formats 39
indicators 40
options 45
play modes 40
playing music 39
playlists 43
music shop 41
network services 8
network settings 123
Nokia PC Suite
calendar data 56
synchronization 97
viewing device memory data 16
notes 102
138
office applications 103
offline profile 108
online sharing 36
POP3 68
TCP/IP 9
WAP 9
PUK codes 121
packet data connections, settings 119
PC connections 97
PC Suite
see Nokia PC Suite
personalization 109
phonebook
See contact cards
PIN codes 120
power saver 116
predictive text input 59
print online 35
printing
calendar entries 57
contact cards 74
e-mails 65
images 34
multimedia messages 63
notes 102
text messages 63
profiles 107
protocols
IMAP4 68
IPv4 and IPv6 118
Quickoffice 103
radio 49
RealPlayer 51
recent calls 85
recorder 103
remote mailbox 64
remote SIM mode 94
reports
See delivery reports
ringing tones
3-D 108
personal ringing tone 76
receiving in a text message 63
songs 47
safety
additional information 132
emergency calls 8, 133
guidelines 7
SAR (specific absorption rate) 134
scenes 24
R1108_en.book Page 139 Wednesday, March 5, 2008 9:53 AM
security
anti-virus software 8
bluetooth 94
browsers 88
settings 120
security code
See lock code
selection keys, assigning shortcuts 115
sending
contact cards, business cards 74
data 95
images 22
messages
video clips 26, 33
service commands 59
Services
See Web
settings
access codes 120
access points 118
Bluetooth connectivity 94
calendar 57
call barring 123
call diverting 123
certificates 121
clock 55
data call 119
data connections 117
date and time 119
display 116
e-mail 68
IM 71, 73
language 115
lock code 121
messaging 66
MMS and e-mail 62
multimedia messages 67
network 123
original settings 115
personalizing the phone 107
screen saver 116
SIP 119
text messages 66
shortcuts
active standby 110
assigning 115
browser 92
image editor 31
multimedia key 14
RealPlayer 51
SIM card
copying names and numbers to
your device 75
messages 66
names and numbers 75
SIP settings 119
sis file 111
sleep mode 116
SMS
see text messages
snooze 55
software
installing applications 111
removing applications 113
transferring a file to your device
111
software update 17, 99
songs
as ringing tones 47
file formats 39
sound clips 28
sounds
adjusting volume 13
muting a ringing tone 83
recording sounds 103
speaker phone
See loudspeaker
speed dialing 78
standby mode 107
support information 17
svg files 33
synchronization 99
text input 59
139
R1108_en.book Page 140 Wednesday, March 5, 2008 9:53 AM
text messages
character limit 61
creating 58
inbox 58
receiving 62
saving 70
sending 60, 61
settings 66
writing 59, 61
themes 109
time 55
tones
See ringing tones
traditional text input 59
transferring content from another
device 11
troubleshooting 125
tutorial 18
UMTS
network 8, 123
see data connections
updating software 17, 99
UPIN codes 120
UPUK codes 121
USB
data cable connection 97
drivers 98
140
indicators 13
printing images 34
transferring music 41
transferring video clips 33
USSD commands 59
VBR 47
video calls 79
answering 83
options 84
rejecting 83
video clips 28
video player
See RealPlayer
Visual Radio 49
voice commands 111
voice dialing 78
voice mailbox 77, 123
changing the phone number 77
voice messages 77
voice tags 111
making calls 78
volume control
adjusting volume 13
during a call 77
loudspeaker 13
wallpapers
changing 109
using pictures 22, 29
WAP 9
Web
access points, See access points
additional browser 90
blogs 91
browser 87
feeds 91
service messages 64

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2008:03:13 13:52:53+01:00
Create Date                     : 2008:03:13 13:52:13+01:00
Metadata Date                   : 2008:03:13 13:52:53+01:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : R1108_en.book
Creator                         : uriihine
Document ID                     : uuid:9dbfbe42-c88a-48fd-96e1-7c292b0fefbf
Instance ID                     : uuid:d971a806-0199-4ba1-bd28-923e68317cce
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 64
Author                          : uriihine
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QFXRM-133X

Navigation menu