Microsoft RM-147 GSM 850/1800/1900/ w/BT User Manual RM 147 en1FCC

Microsoft Mobile Oy GSM 850/1800/1900/ w/BT RM 147 en1FCC

Contents

manual

DRAFTRM-147 User Guide 924XXXXIssue 1RM-147_en1FCC.fm Page 1 Friday, August 4, 2006 8:51 AM
DRAFTDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-147 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration or country specific information at www.nokia.com.Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Visual Radio, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java is a trademark of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.0434RM-147_en1FCC.fm Page 2 Friday, August 4, 2006 8:51 AM
DRAFTThis device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.924XXXX/Issue1RM-147_en1FCC.fm Page 3 Friday, August 4, 2006 8:51 AM
4DRAFTContentsFor your safety.......................... 6General information................. 9Access codes............................................ 9Configuration settings service ........ 10Download content .............................. 10Nokia support....................................... 101. Get started ......................... 11Install SIM card and battery............ 11Insert a microSD card ........................ 12Remove the microSD card ............... 12Charge the battery.............................. 13Open the slide phone......................... 13Switch the phone on and off........... 13Antenna ................................................. 14Headset .................................................. 14Phone strap........................................... 152. Your phone......................... 16Keys and parts...................................... 16Standby mode ...................................... 16Flight mode........................................... 18Keypad lock (keyguard) ..................... 19Functions without a SIM card......... 193. Call functions..................... 19Make a call ........................................... 19Answer or reject a call....................... 21Options during a call.......................... 214. Write text........................... 22Traditional text input......................... 22Predictive text input .......................... 225. Navigate the menus .......... 236. Messaging .......................... 24Text message........................................ 24Multimedia message.......................... 25Postcards ............................................... 27Flash messages .................................... 27Nokia Xpress audio messaging........ 28Memory full.......................................... 28Folders.................................................... 29E-mail application .............................. 29Instant messaging............................... 32Voice messages.................................... 36Info messages ...................................... 36Service commands.............................. 36Delete messages.................................. 36SIM messages....................................... 36Message settings................................. 377. Contacts.............................. 39Search for a contact .......................... 40Save names and phone numbers.... 40Save details........................................... 40Copy or move contacts...................... 40Edit contact details ............................ 41Synchronize all .................................... 41Delete contacts.................................... 41Business cards...................................... 42Settings.................................................. 42Groups.................................................... 42Speed dials............................................ 42Info, service, and my numbers ........ 438. Call log................................ 43Positioning information .................... 449. Settings............................... 44Profiles ................................................... 44Themes ................................................... 44Tones....................................................... 45Display.................................................... 45Time and date ...................................... 46My shortcuts ........................................ 46Connectivity ......................................... 47RM-147_en1FCC.fm Page 4 Friday, August 4, 2006 8:51 AM
5DRAFTCall........................................................... 52Phone...................................................... 53Enhancements...................................... 54Configuration........................................ 54Security .................................................. 55Phone software updates.................... 56Restore factory settings..................... 5710. Operator menu ................ 5711. Gallery.............................. 58Print images.......................................... 58Memory card......................................... 5912. Media ............................... 60Camera and video................................ 60Media player......................................... 61Music player.......................................... 61Radio ....................................................... 63Voice recorder....................................... 65Equalizer................................................. 65Stereo widening................................... 6613. Push to talk ..................... 66PTT channels ......................................... 66Switch PTT on and off ........................ 68Make and receive a PTT call ............. 68Callback requests................................. 70Add a one-to-one contact................ 71PTT settings........................................... 71Configuration settings ....................... 72Web ......................................................... 7214. Organizer.......................... 72Alarm clock............................................ 72Calendar................................................. 73To-do list................................................ 74Notes....................................................... 74Calculator .............................................. 74Countdown timer ................................ 75Stopwatch ............................................. 7515. Applications ..................... 76Launch a game..................................... 76Launch an application........................ 76Application options............................. 77Download an application .................. 7716. SIM services ..................... 7817. Web................................... 78Set up browsing ................................... 78Connect to a service........................... 79Browse pages........................................ 79Bookmarks............................................. 80Appearance settings ........................... 80Security settings .................................. 81Download settings .............................. 81Service inbox ........................................ 82Cache memory...................................... 82Browser security .................................. 8318. PC connectivity................ 84Nokia PC Suite...................................... 85Packet data, HSCSD, and CSD.......... 85Bluetooth............................................... 85Data communication applications . 8519. Battery information......... 86Charging and discharging ................. 86Nokia battery authentication .......... 8720. Technical Information ..... 89Care and maintenance ........... 90Additional safety information 91APPENDIX ............................... 95A message from the CTIA........... 95A message from the FDA............ 97RM-147_en1FCC.fm Page 5 Friday, August 4, 2006 8:51 AM
For your safety6DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless phones may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDo not use the phone at a refuelling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the phone where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.RM-147_en1FCC.fm Page 6 Friday, August 4, 2006 8:51 AM
For your safety7DRAFTWATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACK-UP COPIESRemember to make back-up copies or keep a written record of all important information stored in your phone.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless device described in this guide is approved for use on the EGSM 850, and GSM 1800 and 1900 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect the privacy and legitimate rights of others.When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others including copyrights.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.■Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your RM-147_en1FCC.fm Page 7 Friday, August 4, 2006 8:51 AM
For your safety8DRAFTdevice may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.■Shared memoryThe following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messages, e-mail, calendar, to-do notes, JavaTM games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.■EnhancementsA few practical rules about accessories and enhancements• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.RM-147_en1FCC.fm Page 8 Friday, August 4, 2006 8:51 AM
General information9DRAFTGeneral information■Access codesSecurity codeThe security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 55.PIN codesThe personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 55.The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.The module PIN is required to access the information in the security module. See “Security module,” p. 83.The signing PIN is required for the digital signature. See “Digital signature,” p. 84.PUK codesThe personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes.Barring passwordThe barring password (4 digits) is required when using the Call barring service. See “Security,” p. 55.RM-147_en1FCC.fm Page 9 Friday, August 4, 2006 8:51 AM
General information10DRAFT■Configuration settings serviceTo use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/support.When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed.To save the settings, select Show > Save. If required, enter the PIN code supplied by the service provider.To discard the received settings, select Exit or Show > Discard.■Download contentYou may be able to download new content (for example, themes) to the phone (network service). You may also be able to download updates of phone software (network service). See “Phone,” p. 53, Phone updates.For the availability of different services, pricing, and tariffs, contact your service provider.Important: Use only services that you trust and that offer adequate security and protection against harmful software.■Nokia supportCheck www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice.For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.RM-147_en1FCC.fm Page 10 Friday, August 4, 2006 8:51 AM
Get started11DRAFT1. Get started■Install SIM card and batteryAlways switch the device off and disconnect the charger before removing the battery.Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.This device is intended for use with BL-5B battery. Always use original Nokia batteries. See “Nokia battery authentication,” p. 87.To remove the back cover of the phone, push the back cover release button (1), and detach the back cover away from the phone (2). Remove the battery as shown (3). Open the SIM card holder (4), and insert the SIM card properly into the holder (5). Close the SIM card holder (6).RM-147_en1FCC.fm Page 11 Friday, August 4, 2006 8:51 AM
Get started12DRAFTReplace the battery (7). Slide the back cover into its place (8, 9).■Insert a microSD cardKeep all microSD memory cards out of the reach of small children.1. Remove the back cover of the phone.2. Insert the card into the microSD card slot with the contact surface facing backwards, and press it until it locks into place.3. Close the back cover of the phone.Use only compatible microSD cards with this device. Other memory cards, such as reduced size multimedia cards, do not fit in the microSD card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.Use only microSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device.■Remove the microSD card Important: Do not remove the microSD card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.1. Make sure that no application is currently accessing the microSD memory card. RM-147_en1FCC.fm Page 12 Friday, August 4, 2006 8:51 AM
Get started13DRAFT2. Remove the back cover of the phone.3. Press the microSD card slightly in to release the lock, and remove the microSD card from the slot.■Charge the batteryCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3 or AC-4 charger. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.Connect the charger to a wall socket and the lead from the charger to the socket on the bottom of your phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.The charging time depends on the charger used. Charging a BL-5B battery with the AC-3 charger takes approximately 3 hours while the phone is in the standby mode.■Open the slide phoneTo open the slide of the phone, push the upper part of the phone up.■Switch the phone on and offWarning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Press and hold the power key. See “Keys and parts,” p. 16. If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.RM-147_en1FCC.fm Page 13 Friday, August 4, 2006 8:51 AM
Get started14DRAFTSet the time and dateEnter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See “Time and date,” p. 46.Plug and play serviceWhen you switch on your phone for the first time, and the phone is in the standby mode, you may be asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to support," p. 55, and “Configuration settings service,” p. 10.■AntennaYour device has an internal antenna.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.■HeadsetThe headset in the sales box has been approved by Nokia for use with this device. Always listen to music at a moderate level. Please be advised to pay special attention to volume level in case you connect any other headsets to the device.Do not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to this connector. RM-147_en1FCC.fm Page 14 Friday, August 4, 2006 8:51 AM
Get started15DRAFTAudio adaptorUse an audio adaptor AD-50 to connect a headphone with a 3.5-mm plug to your phone. If the adaptor is connected to the phone the earpiece of the phone will be disconnected.Please note that the adaptor does not support a microphone line.■Phone strapThread a strap through the eyelet of the phone as shown in the picture and tighten it.RM-147_en1FCC.fm Page 15 Friday, August 4, 2006 8:51 AM
Your phone16DRAFT2. Your phone■Keys and partsEarpiece (1)Music player, skip, rewind (2)Music player, start, pause (3)Enhancements connector (4)Music player, skip, forward (5)Call key (6)Left, middle, and right selection keys (7)End key (8)Scroll keys (9)Keypad (10) Charger connector (11)USB connector (12)Power key (13)Phone strap eyelet (14)Camera lens (15)Volume up/ PTT key (16)Volume down (17)Camera key (18)Infrared port (19)Self-portrait viewfinder (20)Loudspeaker (21)■Standby modeWhen the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.RM-147_en1FCC.fm Page 16 Friday, August 4, 2006 8:51 AM
Your phone17DRAFTDisplaySignal strength of the cellular network (1) Battery charge status (2) Indicators (3) Network name or operator logo (4) Clock (5)Main screen (6)Function of left selection key (7) is Go to or a shortcut to another function. See “Left selection key,”p. 46.Function of middle selection key (8) is Menu.Function of right selection key (9) is Names or a shortcut to another function. See “Right selection key,” p. 46. Operator variants may have an operator-specific name.Active standbyIn the active standby mode there is a list of selected phone features and information on the screen that you can directly access. To switch it on or off, select Menu > Settings > Display > Active standby > Active standby mode > On or Off. In the standby mode, scroll up or down to activate the navigation in the list, and select Select or View. Left and right arrows at the beginning and end of a line indicate that further information is available by scrolling left or right. To end the active standby mode, select Exit.To organize and change the active standby mode, activate the navigation mode, and select Options and from the available options.IndicatorsYou have unread messages.You have unsent, canceled, or failed messages.The phone registered a missed call.RM-147_en1FCC.fm Page 17 Friday, August 4, 2006 8:51 AM
Your phone18DRAFT, Your phone is connected to the instant messaging service, and the availability status is online or offline.You received one or several instant messages.The keypad is locked.The phone does not ring for an incoming call or text message. The alarm clock is activated.The countdown timer is running.The stopwatch is running., The phone is registered to the GPRS or EGPRS network., A GPRS or EGPRS connection is established., The GPRS or EGPRS connection is suspended (on hold).A Bluetooth connection is active.,Push-to-talk connection is active or suspended.If you have two phone lines, the second phone line is selected.All incoming calls are diverted to another number.The loudspeaker is activated, or the music stand is connected to the phone.Calls are limited to a closed user group.The timed profile is selected., , , or A headset, hands-free, loopset, or music stand enhancement is connected to the phone.■Flight modeYou can deactivate all radio frequency functionality and still have access to offline games, calendar, and phone numbers. Use the flight mode in radio sensitive environments—on board aircraft or in hospitals. When the flight mode is active, is shown.RM-147_en1FCC.fm Page 18 Friday, August 4, 2006 8:51 AM
Call functions19DRAFTSelect Menu > Settings > Profiles > Flight > Activate or Personalise.To deactivate the flight mode, select any other profile.In the flight mode you can make an emergency call. Enter the emergency number, press the call key, and select Yes when asked Exit flight profile? The phone attempts to make an emergency call.■Keypad lock (keyguard)To prevent the keys from being accidentally pressed, close the phone, and select Lock within 3.5 seconds.To unlock the keypad, select Unlock > Ok, or open the phone. If the security keyguard is activated, enter the security code if requested.To answer a call when the keyguard is on, press the call key or open the phone. When you end or reject the call, the keypad automatically locks.For Security keyguard, see “Phone,” p. 53.When the keyguard is on, calls may be possible to the official emergency number programmed into your device.■Functions without a SIM cardSeveral functions of your phone may be used without installing a SIM card (for example, the data transfer with a compatible PC or another compatible device). Some functions appear dimmed in the menus and cannot be used.For an emergency call, some networks may require that a valid SIM card is properly inserted in the device.3. Call functions■Make a call1. Enter the phone number, including the area code.For international calls, press * twice for the international prefix (the + character replaces the international access code), enter the RM-147_en1FCC.fm Page 19 Friday, August 4, 2006 8:51 AM
Call functions20DRAFTcountry code, the area code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.To increase the volume in a call, press + and to decrease, press - .3. To end the call or to cancel the call attempt, press the end key, or close the phone.To search for a name or phone number that you have saved in Contacts, see “Search for a contact,” p. 40. Press the call key to call the number.To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name, and press the call key.Speed dialingAssign a phone number to one of the speed-dialing keys, 2 to 9. See “Speed dials,” p. 42. Call the number in either of the following ways:• Press a speed-dialing key, then the call key.•If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialling in “Call,” p. 52.Enhanced voice dialingYou can make a phone call by saying the name that is saved in the contact list of the phone. Voice commands are language-dependent. To set the language, see Voice playback lang. in “Phone,” p. 53.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.1. In the standby mode, press and hold the right selection key, or press and hold the volume down key. A short tone is played, and Speak now is displayed.2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. If the result is not the correct one, scroll to another entry.RM-147_en1FCC.fm Page 20 Friday, August 4, 2006 8:51 AM
Call functions21DRAFTUsing voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in “My shortcuts,” p. 46.■Answer or reject a callTo answer an incoming call, press the call key, or open the phone. To end the call, press the end key, or close the phone.To reject an incoming call, press the end key. To mute the ringing tone, select Silence.Call waitingTo answer the waiting call during an active call (network service), press the call key. The first call is put on hold. To end the active call, press the end key.To activate the Call waiting function, see “Call,” p. 52.■Options during a callMany of the options that you can use during a call are network services. For availability, contact your service provider.During a call, select Options and from the following options:Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice clarity, Loudspeaker or Handset. Network services options are Answer or Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:Send DTMF — to send tone stringsSwap — to switch between the active call and the call on holdTransfer — to connect a call on hold to an active call and disconnect yourselfConference — to make a conference callPrivate call —to discuss privately in a conference callWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. RM-147_en1FCC.fm Page 21 Friday, August 4, 2006 8:51 AM
Write text22DRAFT4. Write textTo enter text (for example, when writing messages), use traditional or predictive text input. When you write text, press and hold Options to toggle between traditional text input, indicated by , and predictive text input, indicated by . Not all languages are supported by predictive text input.The character cases are indicated by , , and . To change the character case, press #. To change from the letter to number mode, indicated by , press and hold #, and select Number mode. To change from the number to the letter mode, press and hold #.To set the writing language, select Options > Writing language. ■Traditional text inputPress a number key, 1 to 9, repeatedly until the desired character appears. The characters available depend on the selected writing language. If the next letter you want is located on the same key as the present one, wait until the cursor appears and enter the letter. The most common punctuation marks and special characters are available under the number key 1.■Predictive text inputPredictive text input is based on a built-in dictionary to which you can also add new words.1. Start writing a word using the keys, 2 to 9. Press each key only once for one letter.2. When you finish writing the word and it is correct, to confirm it by adding a space, press 0.If the word is not correct, press * repeatedly, and select the word from the list.If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, RM-147_en1FCC.fm Page 22 Friday, August 4, 2006 8:51 AM
Navigate the menus23DRAFTselect Spell. Enter the word using traditional text input, and select Save.To write compound words, enter the first part of the word, and press the scroll key right to confirm it. Write the last part of the word, and confirm the word.3. Start writing the next word.5. Navigate the menusThe phone offers you an extensive range of functions, which are grouped into menus.1. To access the menu, select Menu.To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab.To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes.2. Scroll through the menu, and select an option (for example, Settings).3. If the selected menu contains further submenus, select the one that you want (for example, Call).4. If the selected menu contains further submenus, repeat step 3.5. Select the setting of your choice.6. To return to the previous menu level, select Back. To exit the menu, select Exit.RM-147_en1FCC.fm Page 23 Friday, August 4, 2006 8:51 AM
Messaging24DRAFT6. MessagingYou can read, write, send, and save text, multimedia, e-mail, audio, and flash messages and postcards. All messages are organized into folders.■Text messageWith the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service).Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 37.To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see “Save details,” p. 40.Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.An indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of 2 messages.Write and send a message1. Select Menu > Messaging > Create message > Text message.2. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add.3. For a SMS e-mail, enter a subject in the Subject: field.4. Write your message in the Message: field.RM-147_en1FCC.fm Page 24 Friday, August 4, 2006 8:51 AM
Messaging25DRAFT5. To send the message, select Send. See “Message sending,” p. 26.Read and reply to a message1. To view a received message, select Show. To view it later, select Exit.To read the message later, select Menu > Messaging > Inbox. 2. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message.3. Write the reply message.4. To send the message, select Send. See “Message sending,” p. 26.■Multimedia messageNote: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.A multimedia message can contain some attachments.To check availability and to subscribe to the multimedia messaging service (MMS, network service), contact your service provider. See “Message settings,” p. 37.Write and send a multimedia messageThe wireless network may limit the size of multimedia messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS.1. Select Menu > Messaging > Create message > Multimedia.2. Write your message. To add a file, select Insert and from the options.3. To view the message before sending it, select Options > Preview.4. To send the message, select Send. See “Message sending,” p. 26.5. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add.6. To send the message, select Send. See “Message sending,” p. 26.RM-147_en1FCC.fm Page 25 Friday, August 4, 2006 8:51 AM
Messaging26DRAFTWrite and send a multimedia plus messageThe wireless network may limit the size of MMS messages. If the inserted image exceeds this limit, the device may make it smaller so that it can be sent by MMS.Any content can be added to the multimedia plus message. Such content might be images, video clips, sound clips, business cards, calendar notes, themes, streaming links, or even unsupported files (for example, files received with an e-mail).1. Select Menu > Messaging > Create message > Multimedia plus.2. Enter one or more phone numbers or e-mail addresses in the To: field. To retrieve a phone number or e-mail address from a memory, select Add.3. Enter a subject and write your message.4. To add a file, select Insert and from the options.5. To view the message before sending it, select Options > Preview.6. To send the message, select Send. See “Message sending,” p. 26.Message sendingCopyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.To send the message, select Send. The phone saves the message in the Outbox folder, and the sending starts.Note: When the phone is sending the message, the animated is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. To cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.RM-147_en1FCC.fm Page 26 Friday, August 4, 2006 8:51 AM
Messaging27DRAFTRead and reply to a messageImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. 1. To view a received message, select Show. To view it later, select Exit.2. To view the whole message if the received message contains a presentation, select Play.To view the files in the presentation or the attachments, select Options > Objects or Attachments.3. To reply to the message, select Options > Reply > Text message, Multimedia, Postcard, Flash message, or Audio message.4. Write the reply message.5. To send the message, select Send. See “Message sending,” p. 26.■PostcardsWith the postcard messaging service (network service), create and send postcards that may contain an image and a greeting text. The postcard is sent to the service provider using multimedia messaging. The service provider prints the postcard and sends it to the postal address given with the message. MMS must be activated before this service can be used.Before you can use the postcard service you must subscribe to the service. To check the availability, and costs, and to subscribe to the service, contact your network operator or service provider.To send a postcard, select Menu > Messaging > Create message > Postcard. Fill in the address, mandatory editor fields are marked by a *. Scroll to the image field, select Insert and an image from the gallery, or New image to insert a recent image; then write your greeting text. To send the message, select Send.■Flash messagesFlash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved.RM-147_en1FCC.fm Page 27 Friday, August 4, 2006 8:51 AM
Messaging28DRAFTWrite a messageSelect Menu > Messaging > Create message > Flash message. Enter the recipient’s phone number and write your message. To have a blinking text, select Options > Insert blink charact.. The text behind the marker blinks until a second marker is inserted.Receive a messageA received flash message is indicated with Message: and a few words from the beginning of the message. To read the message, select Read. To extract numbers and addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save it.■Nokia Xpress audio messagingYou can use the MMS to create and send a audio message in a convenient way. MMS must be activated before you can use audio messages.Create a message1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see “Voice recorder,” p. 65.2. Speak your message.3. Enter one or more phone numbers in the To: field, or select Add to retrieve a number.4. To send the message, select Send.Listen to a messageTo open a received audio message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit.■Memory fullWhen you receive a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old RM-147_en1FCC.fm Page 28 Friday, August 4, 2006 8:51 AM
Messaging29DRAFTmessages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If more messages are to be deleted, select Mark. Mark all the messages you want to delete, and select Options > Delete marked.■FoldersThe phone saves received messages in the Inbox folder.Messages that have not yet been sent are saved in the Outbox folder.To set the phone to save the sent messages in the Sent items folder, see Save sent messages in “General settings,” p. 37.To edit and send messages that you have written and saved in the Drafts folder, select Menu > Messaging > Drafts.You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items. To add a folder, select Options > Add folder. To delete or rename a folder, scroll to the desired folder, and select Options > Delete folder or Rename folder.Your phone has templates. To create a new template, save a message as a template. To access the template list, select Menu > Messaging > Saved items > Templates.■E-mail applicationThe e-mail application uses a packet data connection (network service) to allow you to access your e-mail account. This e-mail application is different from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system.You can write, send, and read e-mail with your phone. Your phone supports POP3 and IMAP4 e-mail servers. This application does not support keypad tones.Before you can send and retrieve any e-mail messages, you must obtain a new e-mail account or use your current account. To check the availability of your e-mail account, contact your e-mail service provider. RM-147_en1FCC.fm Page 29 Friday, August 4, 2006 8:51 AM
Messaging30DRAFTCheck your e-mail settings with your e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See “Configuration settings service,” p. 10.To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See “E-mail messages,” p. 39.This application does not support keypad tones.Setting wizardThe setting wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New. The Manage accounts options allow you to add, delete, and change the e-mail settings.Write and send an e-mailYou can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail.1. Select Menu > Messaging > E-mail > Write new e-mail.2. If more than one e-mail account is defined, select the account from which you want to send the e-mail.3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail message. To attach a file from Gallery, select Options > Attach file.4. To send the e-mail message, select Send > Send now. To save the e-mail in the Outbox folder to be sent later, select Send > Send later.To edit or continue writing your e-mail later, select Options > Save as draft. The e-mail is saved in Outboxes > Draft.To send the e-mail later, select Menu > Messaging > E-mail > Options > Send now or Send and check e-mail.RM-147_en1FCC.fm Page 30 Friday, August 4, 2006 8:51 AM
Messaging31DRAFTDownload e-mail1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check for new e-mail.If more than one e-mail account is defined, select the account from which you want to download the e-mail.The e-mail application only downloads e-mail headers at first. 2. Select Back > Inboxes, the account name, and the new message, and select Retrieve to download the complete e-mail message.To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Send and check e-mailRead and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.1. Select Menu > Messaging > E-mail > Inboxes, the account name, and the desired message.2. To reply to an e-mail, select Reply > Original text or Empty message. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply.3. To send the message, select Send > Send now. E-mail foldersYour phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: “Account name” for incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for sorting e-mail, Junk where all spam e-mail is stored, Draft for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent. To manage the folders and their e-mail content, select Options to view the available options of each folder.RM-147_en1FCC.fm Page 31 Friday, August 4, 2006 8:51 AM
Messaging32DRAFTSpam filterTo activate and define a spam filter, select Options > Spam filter > Settings in the main e-mail idle screen. The spam filter allows you to put specific senders on a black or white list. Black list sender messages are filtered to the junk folder. Unknown and white list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender.■Instant messagingWith instant messaging (IM) (network service) you can send short, simple text messages to online users. You have to subscribe to a service and register with the IM service you want to use. For more information about signing up for IM services, contact your service provider.To set the required settings for the IM service, see Connection settings in “Access,” p. 32. The icons and texts on the display may vary, depending on the IM service.Note: Depending on your IM service, you may not have access to all of the features described in this guide.AccessSelect Menu > Messaging > IMs. IMs may be replaced by another term depending on the service provider. If more than one set of connection settings for IM service is available, select the one you want. Select from the following options:Login — to connect to the IM service. To set the phone to automatically connect to the IM service when you switch on the phone; in the login session, select Automatic login: >On, or select Menu > Messaging > IMs, connect to the IM service, and select Options > Settings > Automatic login > On. Saved conversations — to view, erase, or rename the conversations that you saved during an IM sessionConnection settings — to edit the settings needed for messagingRM-147_en1FCC.fm Page 32 Friday, August 4, 2006 8:51 AM
Messaging33DRAFTConnectTo connect to the service, access the instant messages menu, select the IM service, if needed, and select Login.To disconnect from the IM service, select Options > Logout.SessionsWhen connected to the service, your status, as seen by others, is shown in a status line: My status: Online, My status: Busy or Status: Appear off. — to change own status, select Change.Below the status line there are three folders containing your contacts and showing their status: Conversations, Online and Offline. To expand the folder, scroll to it, and select Expand (or press scroll right); to collapse the folder, select Collapse (or press scroll left).Conversations — shows the list of new and read instant messages or invitations to IM during the active IM session indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation.The icons and texts on the display depends on the IM service.Online — shows the number of contacts that are onlineOffline — shows the number of contacts that are offlineTo start a conversation, expand the Online or the Offline folder, and scroll to the contact with whom you would like to chat, and select Chat. To answer an invitation or to reply to a message, expand the Conversations folder, scroll to the contact to whom you would like to chat, and select Open. To add contacts, see “Add IM contacts,” p. 35.Groups > Public groups (not visible if groups are not supported by the network) — The list of bookmarks to public groups provided by the service provider is displayed. To start a IM session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as RM-147_en1FCC.fm Page 33 Friday, August 4, 2006 8:51 AM
Messaging34DRAFTyour nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can create a private group. See “Groups,” p. 35.Search > Users or Groups — to search for other IM users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group, or by group name, topic, or ID.Options > Chat or Join group — to start the conversation when you have found the user or the group that you wantAccept or reject an invitationIf you receive a new invitation, to read it, select Read. If more than one invitation is received, select an invitation and Open. To join the private group conversation, select Accept, and enter the screen name you want to use as your nickname. To reject or delete the invitation, select Options > Reject or Delete.Read an instant messageIf you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read. If more than one message is received, select a message and Open.New messages received during an active conversation are held in IMs > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact.Participate in a conversationTo join or start an IM session, write your message, and select Send.If you receive a new message during a conversation from a person who is not taking part in the current conversation, is displayed, and the phone sounds an alert tone.Write your message, and select Send. Your message is displayed, and the reply message is displayed below your message.RM-147_en1FCC.fm Page 34 Friday, August 4, 2006 8:51 AM
Messaging35DRAFTAdd IM contactsWhen connected to the IM service, in the IM main menu, select Options > Add contact > By mobile number, Enter ID manually, Search from server, or Copy from server (depending on service provider).Scroll to a contact. To start a conversation, select Chat.Block or unblock messagesWhen you are in a conversation and want to block messages, select Options > Block contact. To block messages from a specific contact in your contacts list, scroll to the contact in Conversations, Online, or Offline, and select Options > Block contact > OK.To unblock a contact, in the IM main menu, select Options > Blocked list. Scroll to the contact you want to unblock, and select Unblock > OK.GroupsYou can use the public groups provided by the service provider, or create your own private groups for an IM conversation.PublicYou can bookmark public groups that your service provider may maintain. Connect to the IM service, and select Groups > Public groups. Select a group and Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your list, select Options > Delete group. To search for a group, select Groups > Public groups > Search groups. PrivateConnect to the IM service, and from the main menu, select Options > Create group. Enter the name for the group and the screen name that you want to use as your nickname. Mark the private group members in the contacts list, and write an invitation.RM-147_en1FCC.fm Page 35 Friday, August 4, 2006 8:51 AM
Messaging36DRAFT■Voice messagesThe voice mailbox is a network service to which you may need to subscribe. For more information contact your service provider.To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice msgs.. To enter, search for, or edit your voice mailbox number, select Voice mailbox no..If supported by the network, indicates new voice messages. To call your voice mailbox number, select Listen.■Info messagesYou can receive messages on various topics from your service provider (network service). For more information, contact your service provider. Select Menu > Messaging > Info messages and from the available options.■Service commandsWrite and send service requests (USSD commands) to your service provider (such as activation commands for network services). Select Menu > Messaging > Serv. commands. ■Delete messagesTo delete messages, select Menu > Messaging > Delete messages > By message to delete single messages, By folder to delete all messages from a folder, or All messages. ■SIM messagesSIM messages are specific text messages that are saved to your SIM card. You can copy or move those messages from the SIM to the phone memory, but not vice versa. To read SIM messages, select Menu > Messaging > Options > SIM messages.RM-147_en1FCC.fm Page 36 Friday, August 4, 2006 8:51 AM
Messaging37DRAFT■Message settingsGeneral settingsGeneral settings are common for text and multimedia messages.Select Menu > Messaging > Message settings > General settings and from the following options:Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folderOverwriting in Sent > Allowed — to set the phone to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you set Save sent messages > Yes.Font size — to select the font size used in messagesGraphical smileys > Yes — to set the phone to replace character-based smileys with graphical onesText messagesThe text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages.Select Menu > Messaging > Message settings > Text messages and from the following options:Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider.Msg. centre in use — to select the message center in useE-mail msg. centres > Add centre — to set the phone numbers and name of the e-mail center for sending SMS e-mails.E-mail centre in use — to select the SMS e-mail message center in useMessage validity — to select the length of time for which the network attempts to deliver your messageRM-147_en1FCC.fm Page 37 Friday, August 4, 2006 8:51 AM
Messaging38DRAFTMessages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service)Use packet data > Yes — to set GPRS as the preferred SMS bearerCharacter support > Full — to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters.Rep. via same centre > Yes — to allow the recipient of your message to send you a reply using your message center (network service)Multimedia messagesThe message settings affect the sending, receiving, and viewing of multimedia messages. You may receive the configuration settings for multimedia messaging as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 54.Select Menu > Messaging > Message settings > Multimedia messages and from the following options:Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)Img. size (MMS plus) — to set the image size in multimedia plus messages.Image size (MMS) — to set the image size in multimedia messages.Default slide timing — to define the default time between slides in multimedia messagesAllow MMS receptn. > Yes or No — to receive or block the multimedia message. If you select In home network, you cannot receive multimedia messages when outside your home network. The default setting of the multimedia message service is generally In home network. The availability of this menu depends on your phone.Incoming MMS msgs. — to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow MMS receptn. is set to No.RM-147_en1FCC.fm Page 38 Friday, August 4, 2006 8:51 AM
Contacts39DRAFTAllow adverts — to receive or reject advertisements. This setting is not shown if Allow MMS receptn. is set to No, or Incoming MMS msgs. is set to Reject.Configuration sett. > Configuration — Only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a MMS account contained in the active configuration settings.E-mail messagesThe settings affect the sending, receiving, and viewing of e-mail. You may receive the settings as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 54.Select Menu > Messaging > Message settings > E-mail messages and from the following options:Configuration — to select the set that you want to activateAccount — to select an account provided by the service providerMy name — to enter your name or nicknameE-mail address — to enter your e-mail addressLogin information — to enter information according to the server typeIncoming mail sett. — to select the maximum number of mails that shall be retrievedOutgoing sett. (SMTP) — to enter SMTP (simple mail transfer protocol) information and setting options used when sending e-mailDispl. term. window > Yes — to perform manual user authentication for intranet connections7. ContactsYou can save names and phone numbers (contacts) in the phone memory and in the SIM card memory.RM-147_en1FCC.fm Page 39 Friday, August 4, 2006 8:51 AM
Contacts40DRAFTThe phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image for a limited number of contacts.The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by .■Search for a contactSelect Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for.■Save names and phone numbersNames and numbers are saved in the used memory. To save a name and phone number, select Menu > Contacts > Names > Options > Add new contact.■Save detailsIn the phone memory you can save different types of phone numbers, a tone or a video clip, and short text items for a contact.The first number you save is automatically set as the default number and is indicated with a frame around the number type indicator (for example, ). When you select a name from contacts (for example, to make a call), the default number is used unless you select another number.Make sure that the memory in use is Phone or Phone and SIM. See “Settings,” p. 42.Search for the contact to which you want to add a detail, and select Details > Options > Add detail. Select from the options available.■Copy or move contactsTo copy or move a contact from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Names. Select the contact to copy or move and Options > Copy contact or Move contact.RM-147_en1FCC.fm Page 40 Friday, August 4, 2006 8:51 AM
Contacts41DRAFTTo copy or move several contacts, select the first contact to copy or move and Options > Mark. Mark the other contacts, and select Options > Copy marked or Move marked.To copy or move all contacts from the phone contact memory to the SIM card memory, or vice versa, select Menu > Contacts > Copy contacts or Move contacts.The SIM card memory can save names with one phone number attached to them.■Edit contact detailsSearch for the contact, and select Details. To edit a name, number, or text item or to change the image, select Options > Edit. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default.■Synchronize allSynchronize your calendar, contacts data, and notes with a remote Internet server (network service). For details see “Synchronize from a server,” p. 51.■Delete contactsTo delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Del. all contacts > From phone memory or From SIM card.To delete a contact, search for the desired contact, and select Options > Delete contact.To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the options available.RM-147_en1FCC.fm Page 41 Friday, August 4, 2006 8:51 AM
Contacts42DRAFT■Business cardsYou can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card.When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.■SettingsSelect Menu > Contacts > Settings and from the following options:Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and numbers from both memories. In that case, when you save names and numbers, they are saved in the phone memory.Contacts view — to select how the names and numbers in Contacts are displayedName display — to select whether the contact’s first or last name is displayed firstFont size — to set the font size for the list of contactsMemory status — to view the free and used memory capacity■GroupsSelect Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.■Speed dialsTo assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want.Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to RM-147_en1FCC.fm Page 42 Friday, August 4, 2006 8:51 AM
Call log43DRAFTassign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in “Call,” p. 52.To make a call using the speed-dialing keys, see “Speed dialing,” p. 20.■Info, service, and my numbersSelect Menu > Contacts and from one of these submenus:Info numbers — to call the information numbers of your service provider if the numbers are included on your SIM card (network service)Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM card (network service)My numbers — to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card8. Call logThe phone registers your missed, received, and dialed calls if the network supports it and the phone is switched on and within the network service area.To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Msg. recipients.To view the approximate information on your recent communications, select Menu > Log > Call duration, Data counter, or Pack. data timer.To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log.Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Some timers may be reset during service or software upgrades.RM-147_en1FCC.fm Page 43 Friday, August 4, 2006 8:51 AM
Settings44DRAFT■Positioning informationThe network may send you a positioning request (network service). Contact your service provider to subscribe and to agree upon the delivery of positioning information.To accept or reject the positioning request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider. The phone displays 1 missed position request. To view the missed positioning request, select Show.To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.9. Settings■ProfilesYour phone has various setting groups called profiles, for which you can customize the phone tones for different events and environments.Select Menu > Settings > Profiles, the desired profile and from the following options:Activate — to activate the selected profilePersonalise — to personalize the profile. Select the setting you want to change, and make the changes. Timed — to set the profile to be active until a certain time (up to 24 hours) and set the end time. When the time set for the profile expires, the previous profile that was not timed becomes active.■ThemesA theme contains elements for personalizing your phone.Select Menu > Settings > Themes and from the following options:RM-147_en1FCC.fm Page 44 Friday, August 4, 2006 8:51 AM
Settings45DRAFTSelect theme — to set a theme. A list of folders in Gallery opens. Open the Themes folder, and select a theme.Theme downloads — to open a list of links to download more themes■TonesYou can change the tone settings of the selected active profile.Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. See Personalise in “Profiles,” p. 44.To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. Select Options > Save to save the settings or Cancel to leave the settings unchanged.If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.■DisplaySelect Menu > Settings > Display and from the available options:Wallpaper — to add the background image in the standby modeActive standby — to switch the active standby mode on or off and to organize and personalize the active standby mode.Standby font colour — to select the color for the texts in the standby modeNavigation key icons — to display the icons of the current navigation key shortcuts in the standby mode when active standby is offSlide animation — to set your phone to display an animation when you open and close the phoneScreen saver > On — to set your phone to display a screen saver. To download more screen savers, select Graphic downloads. To set the time after which the screen saver is activated, select Time-out.Power saver — to save some battery power. The date and a digital clock are displayed when no function of the phone is used for a certain time.RM-147_en1FCC.fm Page 45 Friday, August 4, 2006 8:51 AM
Settings46DRAFTFont size — to set the font size for messaging, contacts, and web pagesOperator logo — to set your phone to display or hide the operator logo. Cell info display > On — to display the cell identity, if available from the network■Time and dateTo change the time, time zone, and date settings, select Menu > Settings > Time and date > Time, Date, or Auto-update of time (network service).When traveling to a different time zone, select Menu > Settings > Time and date > Clock > Time zone and the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT) or Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of Greenwich/London (UK). ■My shortcutsWith personal shortcuts you get quick access to often used functions of the phone.Left selection keyTo select a function from the list, select Menu > Settings > My shortcuts > Left selection key.If the left selection key is Go to to activate a function, in the standby mode, select Go to > Options and from the following options:Select options — to add a function to the shortcut list or to remove oneOrganise — to rearrange the functions on your personal shortcut listRight selection keyTo select a function from the list, select Menu > Settings > My shortcuts > Right selection key.RM-147_en1FCC.fm Page 46 Friday, August 4, 2006 8:51 AM
Settings47DRAFTNavigation keyTo assign other phone functions from a predefined list to the navigation key (scroll key), select Menu > Settings > My shortcuts > Navigation key.Voice commandsTo call contacts and carry out phone functions, say the voice commands. Voice commands are language-dependent. To set the language, see Voice playback lang. in “Phone,” p. 53.To select the phone functions to activate with a voice commands, select Menu > Settings > My shortcuts > Voice commands and a folder. Scroll to a function. indicates that the voice tag is activated. To activate the voice tag, select Add. To play the activated voice command, select Play. To use voice commands, see “Enhanced voice dialing,” p. 20.To manage the voice commands, scroll to a phone function, and select from the following options:Edit or Remove — to change or deactivate the voice command of the selected functionAdd all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list■ConnectivityYou can connect the phone to a compatible device using a Bluetooth wireless technology, infrared, or a USB data cable connection. You can also define the settings for EGPRS dial-up connections.Bluetooth wireless technologyThis device is compliant with Bluetooth Specification 2.0 + EDR supporting the following profiles: generic access, network access, generic object exchange, hands-free, headset, object push, file transfer, dial-up networking, SIM access, and serial port. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.RM-147_en1FCC.fm Page 47 Friday, August 4, 2006 8:51 AM
Settings48DRAFTThere may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of-sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.Set up a Bluetooth connectionSelect Menu > Settings > Connectivity > Bluetooth and from the following options:Bluetooth > On or Off — to activate or deactivate the Bluetooth function. indicates that Bluetooth is activated.Search audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone.Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Select a device and Pair. Enter an agreed Bluetooth passcode of the device (up to 16 characters) to pair (associate) the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer.Bluetooth wireless connectionSelect Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active, select Active devices. To view a list of Bluetooth devices that are currently paired with the phone, select Paired devices.Bluetooth settingsTo define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's name.RM-147_en1FCC.fm Page 48 Friday, August 4, 2006 8:51 AM
Settings49DRAFTIf you are concerned about security, turn off the Bluetooth function, or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree.InfraredYou can set up the phone to send and receive data through its infrared (IR) port to or from a IRDA compatible phone or data device. Do not point the IR beam at anyone's eyes or allow it to interfere with other IR devices. Infrared devices are Class 1 laser products.When sending or receiving data, ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.To activate or deactivate the IR port of your phone, select Menu > Settings > Connectivity > Infrared.If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be started again.IR connection indicatorWhen is shown continuously, the IR connection is activated, and your phone is ready to send or receive data through its IR port.When blinks, your phone is trying to connect to the other device, or a connection has been lost.Packet dataGeneral packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP)-based network.To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data conn. and from the following options:When needed — to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated.RM-147_en1FCC.fm Page 49 Friday, August 4, 2006 8:51 AM
Settings50DRAFTAlways online — to set the phone to automatically connect to a packet data network when you switch the phone onModem settingsYou can connect the phone using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the phone as a modem to enable GPRS connectivity from the PC.To define the settings for connections from your PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select Edit active access pt. > Packet data acc. pt., enter a name to change the access point settings, and select OK. Select Packet data acc. pt., enter the access point name (APN) to establish a connection to an network, and select OK.You can also set the EGPRS dial-up service settings (access point name) on your PC using the Nokia Modem Options software. See “Nokia PC Suite,” p. 85. If you have set the settings both on your PC and on your phone, the PC settings are used.Data transferSynchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service).Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card.Transfer contact listTo copy or synchronize data from your phone, the name of the device and the settings must be in the list of transfer contacts. If you receive data from another device (for example, a compatible mobile phone), the corresponding transfer contact is automatically added to the list, using the contact data from the other device. Server sync and PC synchronisation are the original items in the list.To add a new transfer contact to the list (for example, a mobile phone), select Menu > Settings > Connectivity > Data transfer > Options > Add RM-147_en1FCC.fm Page 50 Friday, August 4, 2006 8:51 AM
Settings51DRAFTtransfer contact > Phone synchronisation or Phone copy, and enter the settings according to the transfer type.To edit the copy and synchronize settings, select a contact from the transfer contact list and Options > Edit.To delete a transfer contact, select it from the transfer contact list and Options > Delete.Data transfer with a compatible deviceFor synchronization use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving data.To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer contact from the list other than Server sync or PC synchronisation. According to the settings, the selected data is copied or synchronized.Synchronize from a compatible PCTo synchronize data from calendar, notes, and contacts, install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology or a USB data cable for the synchronization, and start the synchronization from the PC.Synchronize from a serverTo use a remote Internet server, subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See “Configuration settings service,” p. 10 and “Configuration,” p. 54.To start the synchronization from your phone, select Menu > Settings > Connectivity > Data transfer > Server sync. Depending on the settings, select Initialising synchronisation or Initialising copy.Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete.RM-147_en1FCC.fm Page 51 Friday, August 4, 2006 8:51 AM
Settings52DRAFTUSB data cableYou can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.To activate the phone for data transfer or image printing, connect the data cable. Confirm USB data cable connected. Select mode., and select from the following options:Nokia mode — to use the cable for PC SuitePrinting & media — to use the phone with a PictBridge compatible printer or with your compatible PCData storage — to connect to a PC that does not have Nokia software and use the phone as a data storage deviceTo change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing & media, or Data storage.■CallSelect Menu > Settings > Call and from the following options:Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in “Security,” p. 55.Voice clarity > Active — to enhance speech intelligibility especially in noisy environmentsAnykey answer > On — to answer an incoming call by briefly pressing any key, except the power key, the camera key, the left and right selection keys, or the end keyAutomatic redial > On — to make a maximum of 10 attempts to connect the call after an unsuccessful call attemptSpeed dialling > On — to dial the names and phone numbers assigned to the speed-dialing keys, 2 to 9, by pressing and holding the corresponding number keyRM-147_en1FCC.fm Page 52 Friday, August 4, 2006 8:51 AM
Settings53DRAFTCall waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 21.Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each callSend my caller ID > Yes — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network.Outgoing call line — to select the phone line 1 or 2 for making calls if supported by your SIM card (network service).Slide call handling — to set the phone to answer calls when you open the phone and to end calls when you close the phone■PhoneSelect Menu > Settings > Phone and from the following options: Language settings — To set the display language of your phone, select Phone language. Automatic selects the language according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for the voice playback, select Voice playback lang.. See “Enhanced voice dialing,” p. 20 and Voice commands in “My shortcuts,” p. 46.Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On.Automatic keyguard — to lock the keypad automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and set the time.Welcome note — to write the note that is shown when the phone is switched onFlight query > On— The phone asks every time when it is switched on whether the flight profile shall be used. With flight profile all radio connections are switched off. The flight profile should be used in areas sensitive to radio emissions.RM-147_en1FCC.fm Page 53 Friday, August 4, 2006 8:51 AM
Settings54DRAFTPhone updates — to receive phone software updates from your service provider (network service). This option may not be available, depending on your phone. See “Phone software updates,” p. 56. Operator selection > Automatic — to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your service provider.Confirm SIM actions — See “SIM services,” p. 78.Help text activation — to select whether the phone shows help textsStart-up tone > On— The phone plays a tone when it is switched on.■EnhancementsThis menu or the following options are shown only if the phone is or has been connected to a compatible mobile enhancement.Select Menu > Settings > Enhancements. Select an enhancement, and depending on the enhancement, from the following options:Default profile — to select the profile that you want to be automatically activated when you connect to the selected enhancementAutomatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off.Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press.Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings■ConfigurationYou can configure your phone with settings that are required for certain services to function correctly. Your service provider may also send you these settings. See “Configuration settings service,” p. 10.Select Menu > Settings > Configuration and from the following options:RM-147_en1FCC.fm Page 54 Friday, August 4, 2006 8:51 AM
Settings55DRAFTDefault config. sett. — to view the service providers saved in the phone. To set the configuration settings of the service provider as default settings, select Options > Set as default. Activ. def. in all apps. — to activate the default configuration settings for supported applicationsPreferred access pt. — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.Connect to support — to download the configuration settings from your service providerDevice manager sett. — to allow or prevent the phone from receiving phone software updates. This option may not be available, depending on your phone. See “Phone software updates,” p. 56.Personal config. sett. — to add new personal accounts for various services manually and to activate or delete them. To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.■SecurityWhen security features that restrict calls are in use (such as call barring, closed user group, and fixed dialling) calls still may be possible to the official emergency number programmed into your device.Select Menu > Settings > Security and from the following options:PIN code request and UPIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off.PIN2 code request — to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off.RM-147_en1FCC.fm Page 55 Friday, August 4, 2006 8:51 AM
Settings56DRAFTCall barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required.Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM card. When the fixed dialing is on, GPRS connections are not possible except while sending text messages over a GPRS connection. In this case, the recipient’s phone number and the message center number must be included in the fixed dialing list.Closed user group — to specify a group of people whom you can call and who can call you (network service)Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or barring passwordCode in use — to select whether the PIN code or UPIN code should be activeAuthority certificates or User certificates — to view the list of the authority or user certificates downloaded into your phone. See “Certificates,” p. 83.Security module sett. — to view Secur. module details, activate Module PIN request, or change the module PIN and signing PIN. See also “Access codes,” p. 9.■Phone software updatesYour service provider may send phone software updates over the air directly to your device (network service). This option may not be available, depending on your phone.Warning: If you install a software update, you cannot use the device, even to make emergency calls, until the update is completed and the device is restarted. Be sure to backup data before accepting a software update. RM-147_en1FCC.fm Page 56 Friday, August 4, 2006 8:51 AM
Operator menu57DRAFTSettingsTo allowed or disallow phone software updates, select Menu > Settings > Configuration > Device manager sett. > Serv. softw. updates and following options:Always allow — to perform all software downloads and updates automaticallyAlways reject — to reject all software updatesConfirm first — to perform software downloads and updates only after your confirmation (default setting)Request a software updateSelect Menu > Settings > Phone > Phone updates to request available phone software updates from your service provider. Select Current softw. details to display the current software version and check whether an update is needed. Select Downl. phone softw. to download and install a phone software update. Follow the instructions on the display.Install a software updateSelect Install softw. update to start the installation, when the installation was cancelled after the download.The software update may take several minutes. If there are problems with the installation, contact your service provider.■Restore factory settingsTo reset some of the menu settings to their original values, select Menu > Settings > Rest. factory sett.. Enter the security code. The names and phone numbers saved in Contacts are not deleted.10. Operator menuThis menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more RM-147_en1FCC.fm Page 57 Friday, August 4, 2006 8:51 AM
Gallery58DRAFTinformation contact your network operator. The operator can update this menu with a service message. For more information, see “Service inbox,” p. 82.11. GalleryIn this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are stored in the phone memory or an attached microSD memory card and may be arranged in folders.Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.To see the list of folders, select Menu > Gallery.To see the available options of a folder, select a folder and Options. To view the list of files in a folder, select a folder and Open. To see the available options of a file, select a file and Options.To view the folders of the memory card when moving a file, scroll to the memory card, and press the scroll key right.■Print imagesYour device supports Nokia XPressPrint. To connect it to a compatible printer use a data cable or send the image using Bluetooth to a printer supporting Bluetooth technology. See “Connectivity,” p. 47. You can print images that are in the jpg format. The images taken with the camera are automatically saved in the jpg format.Select the image you want to print and Options > Print.RM-147_en1FCC.fm Page 58 Friday, August 4, 2006 8:51 AM
Gallery59DRAFT■Memory cardKeep all memory cards out of the reach of small children.You can use the microSD memory card to store your multimedia files such as video clips, music tracks, and sound files, images, and messaging data.Some of the folders in Gallery with content that the phone uses (for example, Themes) may be stored on the memory card.To insert and remove the microSD memory card, see “Insert a microSD card,” p. 12 and “Remove the microSD card,” p. 12.Format the memory cardWhen a memory card is formatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.To format a memory card, select Menu >Gallery or Applications, the memory card folder , and Options > Format memory card > Yes.When formatting is complete, enter a name for the memory card.Lock the memory cardTo set a password to lock your memory card to help prevent unauthorized use, select Options > Set password. The password can be up to eight characters long.The password is stored in your phone and you do not have to enter it again while you are using the memory card on the same phone. If you want to use the memory card on another phone, you are asked for the password. To delete the password, select Options > Delete password.Check memory consumptionTo check the memory consumption of different data groups and the available memory for installing new applications or software on your memory card, select Options > Details.RM-147_en1FCC.fm Page 59 Friday, August 4, 2006 8:51 AM
Media60DRAFT12. MediaWhen taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.■Camera and video You can take images or record video clips with the built-in camera. Take an imageTo access the still image function, press the camera key (1) in the standby mode; if the video function is on, scroll left or right.To take an image in landscape format, hold the phone in a horizontal position. To zoom in and out in the camera mode, use the volume keys (2).To take an image, select Capture, or press the camera key. The phone saves images on the memory card.Select Options to set Night mode on if the lighting is dim, Self-timer on to activate the self-timer, or Img. sequence on to take images in a fast sequence. With the highest image size setting, three images are taken in a sequence, with other size settings, five images are taken.Select Options > Settings >Image preview time and a preview time to display the taken images on the display. During the preview time, select Back to take another image or Send to send the image as a multimedia message.Your device supports an image capture resolution of 1024 x 1280 pixels. The image resolution in these materials may appear different.Record a video clipTo access the video function, press and hold the camera key in the standby mode; or if the camera function is on, scroll left or right. To start the video recording, select Record. To pause the recording, select Pause; RM-147_en1FCC.fm Page 60 Friday, August 4, 2006 8:51 AM
Media61DRAFTto resume the recording, select Continue; to stop the recording, select Stop. The phone saves the images on the memory card.Camera and video optionsTo use a filter, select Options > Effects >False colours, Greyscale, Sepia, Negative, or Solarise. To change the camera and video settings, select Options > Settings. ■Media playerWith the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service).Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads to select or download media.Select Menu > Media > Media player > FF/Rew interval to set the step width for fast forward or rewind.Configuration for a streaming serviceYou may receive the configuration settings required for streaming as a configuration message from the service provider. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 54. To activate the settings, do the following:1. Select Menu > Media > Media player > Streaming settings > Configuration.2. Select a service provider, Default, or Personal config. for streaming.3. Select Account and a streaming service account contained in the active configuration settings.■Music playerYour phone includes a music player for listening to music tracks or other MP3 or AAC sound files that you have downloaded from the Web or transferred to the phone with the Nokia Music Manager application, which is part of Nokia PC Suite. See “Nokia PC Suite,” p. 85.RM-147_en1FCC.fm Page 61 Friday, August 4, 2006 8:51 AM
Media62DRAFTCopyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.Music files stored in the music folder in the phone memory or on the memory card will automatically be detected and added to the music library during the startup of the phone.To open the music player, select Menu > Media > Music player.Playing the music tracksWarning! Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.Operate the music player with the music player keys on the phone or with the scroll keys when the music player menu is open.To start playing, press .To adjust the volume level, use the volume keys on the side of the phone. To pause the playing, press .To rewind the current track, press and hold . To fast forward the current track, press and hold . Release the key at the position you want to continue the music playback.To skip to the next track, press . To skip to the beginning of the previous track, press .To close the music player menu and to continue music playback in the background, press the end key.To stop the music player, press and hold the end key.Music player optionsIn the Music player menu select from the following options:Show tracks — View all available tracks of the active track list and play the desired track. To play a track, scroll to the desired track, and select Play.Music library — View all available tracks ordered according to Artists, Albums, Genres, Composers, or Track lists. Select Update library to RM-147_en1FCC.fm Page 62 Friday, August 4, 2006 8:51 AM
Media63DRAFTrefresh the lists. Track lists generated with the Nokia Music Manager you will find under Track lists > My track lists.Play options — Select Random to play the tracks on the track list in random order. Select Repeat to play the current track or the entire track list repeatedly.Media equaliser — to select or define an equalizer setting.Add to Favourites — to add the current track to the favorite track listPlay via Bluetooth — to connect and play the tracks on an audio accessory using Bluetooth technologyUse tone — to set the currently played music track, for example, as a ringing tone. The availability of this menu depends on your phone.Send — to send the current track by a multimedia message or using Bluetooth technologyWeb page — to access a Web page associated with the currently played trackMusic downloads — to connect to a Web serviceMemory status — to view the free and used memory capacity■RadioThe FM radio depends on an antenna other than the wireless device’s antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Select Menu > Media > Radio.To use the graphical keys , , , or on the display, scroll left or right to the desired key, and select it.Save radio frequencies1. To start the search, select and hold or . To change the radio frequency in 0.05 MHz steps, briefly press or .RM-147_en1FCC.fm Page 63 Friday, August 4, 2006 8:51 AM
Media64DRAFT2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.3. Enter the name of the radio station.Listen to the radioSelect Menu > Media > Radio. To scroll to the desired frequency, select or , or press the headset key. To select a radio station, briefly press the corresponding number keys. To adjust the volume, press the volume keys. Select from the following options:Switch off — to turn off the radioSave station — to save a new station (shown if a new station is detected)Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset.Mono output or Stereo output — to listen to the radio in monophonic sound or in stereoStations — to select the list of saved stations. To delete or rename a station, scroll to the desired station, and select Options > Delete station, or Rename. Select Visual service ID to enter a service ID given by the visual radio service provider (network service)Search all stations — to search for new radio stationsSet frequency — to enter the frequency of the desired radio stationStation directory — to access a Web site with a list of radio stationsEnable visual service > Automatically — to set whether Visual Radio (network service) starts automatically when you turn on the radio. Some radio stations may send text or graphical information that you can view using the Visual Radio application. To check the availability and costs, contact your service provider.When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.RM-147_en1FCC.fm Page 64 Friday, August 4, 2006 8:51 AM
Media65DRAFT■Voice recorderYou can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later.The recorder cannot be used when a data call or GPRS connection is active.Record sound1. Select Menu > Media > Voice recorder.To use the graphical keys , , or on the display, scroll left or right to the desired key, and select it.2. To start the recording, select . To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping. When recording a call, hold the phone in the normal position near to your ear. To pause the recording, select .3. To end the recording, select . The recording is saved in Gallery > Recordings.To listen to the latest recording, select Options > Play last recorded.To send the last recording, select Options > Send last recorded.To see the list of recordings in Gallery, select Options > Recordings list > Recordings.■EqualizerYou can control the sound quality when using the music player by amplifying or diminishing frequency bands.Select Menu > Media > Equaliser.To activate a set, scroll to one of the equalizer sets, and select Activate.To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.RM-147_en1FCC.fm Page 65 Friday, August 4, 2006 8:51 AM
Push to talk66DRAFT■Stereo wideningStereo widening enhances the audio output of stereo enhancements by enabling a wider stereo sound effect. To change the setting, select Menu > Media > Stereo widening.13. Push to talkIf available, select Menu > Push to talk.Push to talk (PTT) over cellular is a two-way radio service available over a GPRS cellular network (network service). You can use PTT to have a conversation with one person or with a group of people (channel) having compatible devices. While you are connected to the PTT service, you can use the other functions of the phone. To check availability and costs, and to subscribe to the service, contact your network operator. Roaming services may be more limited than for normal calls.Before you can use the PTT service, you must define the required PTT service settings. See “PTT settings,” p. 71 and “Configuration settings,” p. 72.■PTT channelsA PTT channel comprises a group of people (for example, friends or a workteam) who joined the channel after they where invited to. When you call a channel, all members joined to the channel hear the call simultaneously. There are different types of PTT channels:Public channel — Every channel member can invite other persons.Private channel — Only persons which receive an invitation by the channel creator can join in.Provisioned channel — A permanent channel is created by the service provider.RM-147_en1FCC.fm Page 66 Friday, August 4, 2006 8:51 AM
Push to talk67DRAFTYou can set the status of each channel to Active or Inactive.The number of active channels and the number of members per channel is limited. Contact your service provider for details.Create a channelTo add a channel, select Menu > Push to talk > Add channel, and enter the settings in the form fields:Channel name: — Enter a name for the new channel.Channel status: — Select Active to set the channel active or Inactive to disable the channel.Nickname in channel: — Enter your nick name to be shown the new channel.Channel security: > Public channel or Private channelImage: — Select Change and an image from the Gallery or the Default graphic to set a graphic for the new channel.To send an invitation to the channel, select Yes when the phone requests it. The recipient of the invitation is added to the member list of the channel when the invitation is accepted. To send further invitations, select Menu > Push to talk > Channel list, a channel, and Options > Send invitation. To send the invitation use a text message or IR.To add a provisioned channel, select Menu > Push to talk > Add channel > Options > Edit add. manually. Enter the Channel address: provided by your service provider.Receive an invitation1. When you receive a text message invitation to a channel, Channel invitation received: is displayed.2. To view the nickname of the person who sent the invitation and the channel address if the channel is not a private channel, select View.3. To add the channel to your phone, select Save. 4. To set the status for the channel, select Active or Inactive.To reject the invitation, select Exit > Yes, or select View > Discard > Yes.RM-147_en1FCC.fm Page 67 Friday, August 4, 2006 8:51 AM
Push to talk68DRAFT■Switch PTT on and offTo connect to the PTT service, select Menu > Push to talk > Switch PTT on, or press and hold the PTT (volume up) key. indicates the PTT connection. indicates that the service is temporarily unavailable. If you have added channels to the phone, you are automatically joined to the active channels.You may assign a default function to the PTT (volume up) key to open the channel list, the contacts list or a single channel or contact. See “PTT settings,” p. 71.To disconnect from the PTT service, select Switch PTT off.■Make and receive a PTT callWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.To make a channel call, a one-to-one call, or a call to multiple recipients, you must hold the PTT (volume up) key as long as you talk. To listen to the response, release the PTT (volume up) key.You may be able to check the login status of your contacts in Menu > Push to talk > Contacts list. This service depends on your network operator and is only available for subscribed contacts. To subscribe a contact, select Options >Subscribe contact, or if one or more contacts are already marked, Subscribe marked. or indicate that the person is either available or unknown. indicates that the person wants not to be disturbed, but can receive callback requests. indicates that the person has PTT not switched on.Make a channel callTo make a call to a channel, select Channel list in the PTT menu, scroll to the desired channel, and press and hold the PTT (volume up) key.RM-147_en1FCC.fm Page 68 Friday, August 4, 2006 8:51 AM
Push to talk69DRAFTMake a one-to-one callTo start a one-to-one call from the list of contacts to which you have added the PTT address, select Contacts > Names or Menu > Push to talk > Contacts list. Scroll to a contact, and press and hold the PTT (volume up) key.To start a one-to-one call from the list of PTT channels, select Channel list, scroll to the desired channel, and select Members. Scroll to the desired contact, and press and hold the PTT (volume up) key.To start a one-to-one call from the list of callback requests you have received, select Callback inbox. Scroll to the desired nickname, and press and hold the PTT (volume up) key.Make a PTT call to multiple recipientsYou can select multiple PTT contacts from the contact list. The recipients receive an incoming call and need to accept the call in order to participate. If supported by your network operator, you also may select contacts with a phone number but without PTT number. For details, contact your network operator. 1. Select Menu > Push to talk > Contacts list, and mark the desired contacts. 2. Press and hold the PTT (volume up) key to start the call. The participating contacts are shown on the display as soon as they join the call. 3. Press and hold the PTT (volume up) key to talk to them. Release the PTT (volume up) key to hear the response.4. Press the end key to terminate the call.Receive a PTT callA short tone notifies you of an incoming PTT call. Information, such as the channel, the phone number, or the nickname (network service) of the caller, is displayed.You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one calls.RM-147_en1FCC.fm Page 69 Friday, August 4, 2006 8:51 AM
Push to talk70DRAFTWhen you press and hold the PTT (volume up) key while the caller is talking, you hear a queuing tone, and Queuing is displayed. Press and hold the PTT (volume up) key, and wait for the other person to finish; then you can talk immediately.■Callback requestsIf you make a one-to-one call and do not get a response, you can send a request for the person to call you back.Send a callback requestYou can send a callback request in the following ways:To send a callback request from the contacts list in the Push to talk menu, select Contacts list. Scroll to a contact, and select Options > Send PTT callback.To send a callback request from Contacts, search for the desired contact, and select Details. Scroll to the PTT address, and select Options > Send PTT callback.To send a callback request from the channel list in the PTT menu, select Channel list, and scroll to the desired channel. Select Members, scroll to the desired contact, and select Options > Send PTT callback.To send a callback request from the callback request list in the Push to talk menu, select Callback inbox. Scroll to a contact, and select Options > Send PTT callback.Respond to a callback requestWhen someone sends you a callback request, Callback request received is displayed in the standby mode. To open the Callback inbox, select View. The list of nicknames of the persons who have sent you callback requests is shown.To make a one-to-one call, select the desired request, and press and hold the PTT (volume up) key.To send a call request back to the sender, select Options > Send PTT callback.RM-147_en1FCC.fm Page 70 Friday, August 4, 2006 8:51 AM
Push to talk71DRAFTTo delete the request, select Delete.To save a new contact or add the PTT address to a contact from a received callback request, select Options > Save as or Add to contact.■Add a one-to-one contactYou can save the names of persons to whom you often make one-to-one calls in the following ways:To add a PTT address to a name in Contacts, search for the desired contact, select Details > Options > Add detail > PTT address. A contact will only appear in the PTT contact list, if the PTT address is entered.To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts list > Options > Add contact.To add a contact from the channel list, connect to the PTT service, select Channel list, and scroll to the desired channel. Select Members, scroll to the member whose contact information you want to save, and select Options. To add a new contact, select Save as. To add a PTT address to a name in Contacts, select Add to contact.■PTT settingsSelect Menu >Push to talk > PTT settings.1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-one calls. To make but not receive one-to-one calls, select Off. The service provider may offer some services that override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone, select Notify.PTT key def. function — to set the PTT (volume up) key to following functions: Open contact list, Open channel list, Call contact or group. Select a contact, a group, or Call PTT channel; and select a channel. When you press and hold the PTT (volume up) key, the selected function is performed.Show my login status — to enable or disable the sending of the login status RM-147_en1FCC.fm Page 71 Friday, August 4, 2006 8:51 AM
Organizer72DRAFTPTT status in startup > Yes or Ask first— to set the phone to automatically connect to the PTT service when you switch the phone onPTT when abroad — to switch the PTT service on or off when the phone is used outside of the home networkSend my PTT address > No — to hide your PTT address from channel and one-to-one calls■Configuration settingsYou may receive the settings for connecting to the service from your service provider. See “Configuration settings service,” p. 10. You can enter the settings manually. See “Configuration,” p. 54.To select the settings for connecting to the service, select Menu > Push to talk > Configuration sett.. Select from the following options:Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurations that support the PTT service are shown.Account — to select a PTT service account contained in the active configuration settingsOther parameters are PTT user name, Default nickname, PTT password, Domain, and Server address.■WebSelect Menu > Push to talk > Web to access the Internet site of your PTT provider.14. Organizer■Alarm clockYou can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock.RM-147_en1FCC.fm Page 72 Friday, August 4, 2006 8:51 AM
Organizer73DRAFTTo set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On.To set the phone to alert you on selected days of the week, select Repeat alarm.To select the alarm tone or set the radio as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone.To set a snooze time-out, select Snooze time-out and the time.Stop the alarmThe phone sounds an alert tone even if the phone was switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the time you set in Snooze time-out, then resumes.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.■CalendarSelect Menu > Organiser > Calendar.The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.In Settings you can set the date, time, time zone, date or time format, date separator, default view, or the first day of the week. In Auto-delete notes, you can set the phone to delete old notes automatically after a specified time.RM-147_en1FCC.fm Page 73 Friday, August 4, 2006 8:51 AM
Organizer74DRAFTMake a calendar noteSelect Menu > Organiser > Calendar. Scroll to the date, and select Options > Make a note and one of the following note types: Meeting, Call, Birthday, Memo, or Reminder. Fill in the fields.Note alarmThe phone displays the note and if set, sounds a tone. With a call note on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze.To stop the alarm without viewing the note, select Exit.■To-do listTo save a note for a task that you must do, select Menu > Organiser > To-do list.To make a note if no note is added, select Add; otherwise, select Options > Add. Fill in the fields, and select Save.To view a note, scroll to it, and select View. While viewing a note, you can also select an option to edit the attributes. You can also select an option to delete the selected note and delete all the notes that you have marked as done. ■NotesTo write and send notes, select Menu > Organiser > Notes.To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write the note, and select Save.■CalculatorThe calculator in your phone provides basic arithmetic and trigonometric functions, calculates the square and the square root, the inverse of a number, and converts currency values.RM-147_en1FCC.fm Page 74 Friday, August 4, 2006 8:51 AM
Organizer75DRAFTNote: This calculator has limited accuracy and is designed for simple calculations.Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter the first number in the calculation. Press # for a decimal point. Scroll to the desired operation or function, or select it from the Options. Enter the second number. Repeat this sequence as many times as it is necessary. To start a new calculation, first select and hold Clear.To perform a currency conversion, select Menu > Organiser > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, and select Options > In domestic or In foreign.Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared.■Countdown timerTo start the countdown timer, select Menu > Organiser > Countd. timer > Normal timer, enter the alarm time, and write a note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.To have an interval timer with up to 10 intervals started, first enter the intervals. Select Menu > Organiser > Countd. timer > Interval timer. To start the timer, select Start timer > Start.■StopwatchYou can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options:RM-147_en1FCC.fm Page 75 Friday, August 4, 2006 8:51 AM
Applications76DRAFTSplit timing — to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop.To save the measured time, select Save.To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset.Lap timing — to take lap timesContinue — to view the timing that you have set in the backgroundShow last — to view the most recently measured time if the stopwatch is not resetView times or Delete times — to view or delete the saved times15. ApplicationsIn this menu you can manage applications and games. These files are stored in the phone memory or an attached microSD memory card and may be arranged in folders.For options to format or lock and unlock the memory card see “Memory card,” p. 59.■Launch a gameYour phone software includes some games. Select Menu > Applications > Games. Scroll to the desired game, and select Open.To set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings. For more options, see “Application options,” p. 77.■Launch an applicationYour phone software includes some Java applications. RM-147_en1FCC.fm Page 76 Friday, August 4, 2006 8:51 AM
Applications77DRAFTSelect Menu > Applications > Collection. Scroll to an application, and select Open.■Application optionsUpdate version — to check if a new version of the application is available for download from Web (network service)Web page — to provide further information or additional data for the application from an Internet page (network service), if availableApplication access — to restrict the application from accessing the network■Download an applicationYour phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it.Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.You can download new Java applications and games in different ways.Use the Nokia Application Installer from PC Suite to download the applications to your phone, or select Menu > Applications > Options > Downloads > App. downloads; the list of available bookmarks is shown. See “Bookmarks,” p. 80.For the availability of different services, pricing, and tariffs, contact your service provider.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.RM-147_en1FCC.fm Page 77 Friday, August 4, 2006 8:51 AM
SIM services78DRAFT16. SIM servicesYour SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services.For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM actions > Yes.Accessing these services may involve sending messages or making a phone call for which you may be charged.17. WebYou can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software.Check the availability of these services, pricing, tariffs, and instructions with your service provider.With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size. You may not be able to view all details of the Internet pages. ■Set up browsingYou may receive the configuration settings required for browsing as a configuration message from the service provider that offers the service that you want to use. See “Configuration settings service,” p. 10. You can also enter all the configuration settings manually. See “Configuration,” p. 54.RM-147_en1FCC.fm Page 78 Friday, August 4, 2006 8:51 AM
Web79DRAFT■Connect to a serviceEnsure that the correct configuration settings of the service are activated.1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration sett..2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See “Set up browsing,” p. 78.3. Select Account and a browsing service account contained in the active configuration settings.4. Select Displ. term. window > Yes to perform manual user authentication for intranet connections.Make a connection to the service in one of the following ways:•Select Menu > Web > Home; or in the standby mode, press and hold 0.• To select a bookmark of the service, select Menu > Web > Bookmarks.• To select the last URL, select Menu > Web > Last web addr..• To enter the address of the service, select Menu > Web > Go to address. Enter the address of the service, and select OK.■Browse pagesAfter you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider.Browse with phone keysTo browse through the page, scroll in any direction.To select an item, press the call key, or select Select.To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *.RM-147_en1FCC.fm Page 79 Friday, August 4, 2006 8:51 AM
Web80DRAFTDirect callingWhile browsing, you can make a phone call, and save a name and a phone number from a page.■BookmarksYou can save page addresses as bookmarks in the phone memory.1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.2. Scroll to a bookmark, and select it; or press the call key to make a connection to the page associated with the bookmark.3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.Receive a bookmarkWhen you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To view the bookmark, select Show.■Appearance settingsWhile browsing, select Options > Other options > Appearance settings; or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options:Text wrapping — to select how the text shall appear on the displayFont size — to set the font sizeShow images > No — to hide images on the pageAlerts > Alert for unsec. conn. > Yes — to set the phone to alert when a secure connection changes to an unsecure one during browsingRM-147_en1FCC.fm Page 80 Friday, August 4, 2006 8:51 AM
Web81DRAFTAlerts > Alert for unsec. items > Yes — to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see “Browser security,” p. 83.Character encoding > Content encoding — to select the encoding for the browser page contentCharacter encoding > Unicode (UTF-8) addr. > On — to set the phone to send a URL as a UTF-8 encodingScreen size > Full or Small— to set the screen layoutJavaScript > Enable — to enable the Java scripts■Security settingsCookiesA cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 82.While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.Scripts over secure connectionYou can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.While browsing, to allow the scripts, select Options > Other options > Security > WMLScript settings; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts in conn. > Allow.■Download settingsTo automatically save all downloaded files in Gallery, select Menu > Web > Settings > Downloading sett. > Automatic saving > On.RM-147_en1FCC.fm Page 81 Friday, August 4, 2006 8:51 AM
Web82DRAFT■Service inboxThe phone is able to receive service messages sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service.To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or delete the message, select Options > Details or Delete.Service inbox settingsSelect Menu > Web > Settings > Service inbox sett..To set whether you want to receive service messages, select Service messages > On or Off.To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels.To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Autom. connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.■Cache memoryA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.RM-147_en1FCC.fm Page 82 Friday, August 4, 2006 8:51 AM
Web83DRAFTTo empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache.■Browser securitySecurity features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.Security moduleThe security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider.To view or change the security module settings, select Menu > Settings > Security > Security module sett..CertificatesImportant: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider.RM-147_en1FCC.fm Page 83 Friday, August 4, 2006 8:51 AM
PC connectivity84DRAFTTo view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security > Authority certificates or User certificates. is displayed during a connection, if the data transmission between the phone and the content server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Digital signatureYou can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.To make a digital signature, select a link on a page (for example, the title of the book you want to buy and its price). The text to sign is shown, which may include the amount and date.Check that the header text is Read and that the digital signature icon is shown.If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.To sign the text, read all of the text first, and select Sign.The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.Select the user certificate you want to use. Enter the signing PIN. The digital signature icon disappears, and the service may display a confirmation of your purchase.18. PC connectivityYou can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through a Bluetooth, infrared, or RM-147_en1FCC.fm Page 84 Friday, August 4, 2006 8:51 AM
PC connectivity85DRAFTa data cable connection. You can use your phone with a variety of PC connectivity and data communications applications.■Nokia PC SuiteWith Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service). Download the PC Suite from the CD delivered with your phone. You may find more information on the Nokia Web site at www.nokia.com/support or your local Nokia Web site.■Packet data, HSCSD, and CSDWith your phone you can use the packet data, high-speed circuit switched data (HSCSD), and circuit switched data (CSD, GSM data) data services. For availability and subscription to data services, contact your network operator or service provider. See “Modem settings,” p. 50.The use of HSCSD services consumes the phone battery faster than normal voice or data calls.■BluetoothUse the Bluetooth technology to connect your compatible Laptop to the Internet. Your phone must have activated a service provider that supports Internet access and your PC has to support Bluetooth PAN (Personal Area Network). After connecting to the network access point (NAP) service of the phone and pairing with your PC your phone automatically opens a packet data connection to the Internet. PC Suite software installation is not necessary when using the NAP service of the phone.See “Bluetooth wireless technology,” p. 47.■Data communication applicationsFor information on using a data communication application, refer to the documentation provided with it.Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation.RM-147_en1FCC.fm Page 85 Friday, August 4, 2006 8:51 AM
Battery information86DRAFTFor better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.19. Battery information■Charging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging.Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot RM-147_en1FCC.fm Page 86 Friday, August 4, 2006 8:51 AM
Battery information87DRAFTor cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.■Nokia battery authenticationAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.RM-147_en1FCC.fm Page 87 Friday, August 4, 2006 8:51 AM
Battery information88DRAFT3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4. Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276.To create a text message,• For countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515.• For India only: Enter Battery followed by the 20-digit battery code, for example, Battery 12345678919876543210, and send to 5555.National and international operator charges will apply.You should receive a message indicating whether the code can be authenticated.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.RM-147_en1FCC.fm Page 88 Friday, August 4, 2006 8:51 AM
Technical Information89DRAFT20. Technical InformationWeight 106 grams (3.8 ounces) incl. BL-5B batteryBattery 860 mAh Li-Ion BatteryNetworks Wireless networks GSM 850, 1800 and 1900Size Volume: 5.2 cubic inches (85 ccm)Length: 3.6 in (92 mm)Width: 1.9 in (48 mm)Thickness: 0.8 in (21 mm)Frequency range (Rx) GSM 850: 869 - 894 MHzGSM1800: 1805 - 1880 MHzGSM1900: 1930 - 1990 MHzFrequency range (Tx) GSM 850: 824 - 849 MHzGSM 1800: 1710 - 1785 MHzGSM1900: 1850 - 1910 MHzTx output power 2 W (max)Battery voltage 3.7 V DCNumber of channels GSM 850: 124GSM 1800: 374GSM 1900: 299Memory size 32 MB flash memory16 MB RAMOperating temperature 59 °F to 77 °F(15 °C to 25 °C)RM-147_en1FCC.fm Page 89 Friday, August 4, 2006 8:51 AM
Care and maintenance90DRAFTCare and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Do not touch the main display with hard or angular materials. Objects like earrings or jewellery may scratch the display.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.RM-147_en1FCC.fm Page 90 Friday, August 4, 2006 8:51 AM
Additional safety information91DRAFTAdditional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.■Operating environmentRemember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PacemakersPacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:RM-147_en1FCC.fm Page 91 Friday, August 4, 2006 8:51 AM
Additional safety information92DRAFT• Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker• Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you suspect interference, switch off your device, and move the device away.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as RM-147_en1FCC.fm Page 92 Friday, August 4, 2006 8:51 AM
Additional safety information93DRAFTpropane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.■Emergency callsImportant: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequate signal strength.Some networks may require that a valid SIM card is properly inserted in the device.2. Press the end key as many times as needed to clear the display and ready the device for calls.3. Enter the official emergency number for your present location. Emergency numbers vary by location.4. Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in the offline or flight mode, you must change the profile to activate the phone function before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.■Certification information (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device RM-147_en1FCC.fm Page 93 Friday, August 4, 2006 8:51 AM
Additional safety information94DRAFTtransmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.66 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over 1 gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 0.90 W/kg and when properly worn on the body is 0.51 W/kg. Information about this device model can be found athttp://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: PPIRM-147.RM-147_en1FCC.fm Page 94 Friday, August 4, 2006 8:51 AM
APPENDIX95DRAFTAPPENDIX■A message from the CTIA© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need.When it comes to the use of wireless phones, safety is your most important call.Wireless phone "Safety Tips"1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. RM-147_en1FCC.fm Page 95 Friday, August 4, 2006 8:51 AM
APPENDIX96DRAFTAlso, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. .Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.RM-147_en1FCC.fm Page 96 Friday, August 4, 2006 8:51 AM
APPENDIX97DRAFT9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!10. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.11. Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85■Message from the FDAThe U.S. Food and Drug Administration (FDA) provides the following consumer information about wireless phones.See http://www.fda.gov/cellphones/ for updated information.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless RM-147_en1FCC.fm Page 97 Friday, August 4, 2006 8:51 AM
APPENDIX98DRAFTphones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.RM-147_en1FCC.fm Page 98 Friday, August 4, 2006 8:51 AM
APPENDIX99DRAFTFDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the RM-147_en1FCC.fm Page 99 Friday, August 4, 2006 8:51 AM
APPENDIX100DRAFTexposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing RM-147_en1FCC.fm Page 100 Friday, August 4, 2006 8:51 AM
APPENDIX101DRAFTmore than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.How does FCC Audit Cell Phone RF?After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct “post-grant” testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that does not meet FCC’s regulatory requirements may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important post-grant test, from a consumer’s perspective, is testing of the RF emissions of the phone. FCC measures the Specific Absorption Rate (SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the test measurement may be less than or greater than the actual RF emitted by the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis.FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted by current measurement standards was added to the maximum permissible SAR, the resulting SAR value would be well below any level known to produce an acute effect. Consequently, FCC’s approach with measurement uncertainty will not RM-147_en1FCC.fm Page 101 Friday, August 4, 2006 8:51 AM
APPENDIX102DRAFTresult in consumers being exposed to any known risk from the RF emitted by cellular telephones.FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years). If new information leads FDA to believe that a change to FCC’s measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach.Updated July 29, 2003RM-147_en1FCC.fm Page 102 Friday, August 4, 2006 8:51 AM

Navigation menu