Microsoft RM-155 CDMA800/1900 Cell Phone with Bluetooth User Manual

Microsoft Mobile Oy CDMA800/1900 Cell Phone with Bluetooth

UserManual.wiki >

Microsoft >

RM 155 User Manual HTML Version

Manual

FCC DRAFT

Nokia 2365i User Guide

FCC DRAFT

LEGAL INFORMATION

PART NO. XXXXXX, ISSUE NO. 1

Nokia, Nokia Connecting People, Pop-Port, and the Nokia Original Enhancements logos are

trademarks or registered trademarks of Nokia Corporation. Other company and product

names mentioned herein may be trademarks or trade names of their respective owners.

cdma2000 is a registered certification mark of the Telecommunications Industry Association.

Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java™ is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 2365i products. Nokia

operates a policy of ongoing development. Nokia reserves the right to make changes to any

of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT

AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND

RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS

DOCUMENT OR WITHDRAW IT AT ANYTIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology, or software subject to export laws and

regulations from the U.S. and other countries. Diversion contrary to law is prohibited.

content from being copied, modified, transferred, or forwarded.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using

your telephone if such interference cannot be eliminated. If you require assistance, contact

your local service facility. This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference,

FCC DRAFT

and (2) this device must accept any interference received, including interference that may

cause undesired operation. Any changes or modifications not expressly approved by Nokia

could void the user’s authority to operate this equipment.

Contents

FCC DRAFT

Contents

1. Phone at a glance......................................................................................... 10

2. Set up your phone ........................................................................................ 15

3. Gallery.............................................................................................................. 21

4. Recent calls .................................................................................................... 23

5. Media................................................................................................................ 26

6. Settings............................................................................................................ 27

7. Contacts........................................................................................................... 46

8. Tools.................................................................................................................. 52

9. Text entry ........................................................................................................ 64

10. Messaging...................................................................................................... 66

11. Extras .............................................................................................................. 74

12. Enhancements .............................................................................................. 75

13. Battery information .................................................................................... 76

For your safety

FCC DRAFT

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the

vehicle while driving. Your first consideration while driving should

be road safety.

INTERFERENCE

Do not switch the device on when wireless phone use is prohibited or

when it may cause interference or danger.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference

in aircraft.

SWITCH OFF WHEN REFUELING

Do not use the device at a refueling point. Do not use near fuel or

chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is

in progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Do not touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

For your safety

FCC DRAFT

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all

important information.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the device is switched on and in service. Press the end key as

many times as needed to clear the display and return to the main

screen. Enter the emergency number, then press the send key. Give

your location. Do not end the call until given permission to do so.

■About your device

The wireless device described in this guide is approved for use on the following

networks: CDMA 800 MHz; CDMA 1900 MHz; and CDMA2000 1xRTT. Contact

your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and the

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless phone use may cause interference or danger.

■Network services

To use the device you must have service from a network operator. Many of the

features in this device depend on features in the wireless network to function.

These network services may not be available on all networks or you may have to

make specific arrangements with your network operator before you can utilize

them. Your network operator may need to give you additional instructions for

their use and explain what charges will apply. Some networks may have limitations

that affect how you can use network services. For instance, some networks may

not support all language-dependent characters and services.

Your network operator may have requested that certain features be disabled or

not activated in your device. If so, they will not appear on your device menu.

Contact your network operator for more information.

For your safety

FCC DRAFT

■Shared memory

The following device features may share memory: contacts; text messages; and

tones in the gallery; calendar notes; games; and applications. Use of one or more

of these features may reduce the memory available for the remaining features

sharing memory. If your phone displays a message that the memory is full when

you try to use a shared memory feature, delete some of the information or entries

stored in the shared memory features before continuing. Some of the features,

such as tones in the gallery; text messages; and applications may have a certain

amount of memory specially allotted to them in addition to the memory shared

with other features.

Welcome

FCC DRAFT

Welcome

Congratulations on your purchase of the Nokia 2365i mobile device. Your phone

provides many functions practical for daily use, such as a hands-free loudspeaker,

alarm clock, calculator, calendar, and more. To personalize your phone, you can

set your favorite ringing tones.

■Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call

1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if

you need to call a customer center or have your phone repaired.

■Getting help

Find your phone label

If you need help, the Nokia Care

Contact Center is available for

assistance. Before calling, we

recommend that you write down

the following information and

have it available:

• Electronic serial number (ESN)

or Mobile Equipment ID (MEID)

• Your zip code

The ESN or MEID is found on the type label, which is located beneath the battery on

the back of the phone. See "Insert the battery," p. 15.

Welcome

FCC DRAFT

Contact Nokia

Please have your product with you when contacting any of these numbers:

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version

may be available at www.nokia.com. An interactive tutorial for this product may

be available at www.nokiahowto.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including

those with disabilities. For more information visit www.nokiaaccessibility.com.

Nokia Care Contact Center, USA

Nokia Inc.

4630 Woodland Corporate Blvd.

Suite #160

Tampa, Florida 33614

Tel: 1-888-NOKIA-2U

(1-888-665-4228)

Fax: 1-813-249-9619

Web site: www.nokiausa.com/support

In Canada call:

Tel: 1-888-22-NOKIA

(1-888-226-6542)

Web site: www.nokia.ca

For TTY/TDD users:

1-800-24-NOKIA (1-800-246-6542)

Phone at a glance

FCC DRAFT

1. Phone at a glance

• Earpiece (1)

• Main display screen (2)

• Left soft key (3)

• Volume key (4)

• Send key (5)

• Keypad (6)

• Headset connector (7)

• Four-way scroll and

center

selection key (8)

• Right soft key (9)

• Power and end key (10)

• Pop-Port™ charger (11)

• Microphone (12)

Phone at a glance

FCC DRAFT

■Standby mode

The following soft keys appear in the standby

mode. The standby mode is home base and

indicates your phone is in the idle state.

Signal strength (1)—A higher bar indicates a

stronger network signal.

Menu (2)—Press the center of the scroll key to

select this option.

Go to (3)—Press the left soft key to select this

option.

Names (4)—Press the right soft key to select this option.

Battery level (5)—A solid green symbol indicates a fully-charged battery. The

green color appears smaller as the battery is used.

■Shortcuts

The following shortcuts appear in the standby mode.

In the standby mode, the scroll key instantly takes you to frequently-accessed

menus:

Scroll up to view the calculator.

Scroll down to view the calendar.

Scroll right to view the tools menu.

Scroll left to view the settings menu.

Press the center of the scroll key to view the main menu or a selected submenu.

■Indicators and icons

Some or all of the following indicators and icons may appear in the standby

mode.

You have a new text or picture message. See "Text messages," p. 66.

You missed a call. See "View missed calls," p. 23.

You have new voice messages. See "Voice messages," p. 71.

Your phone keypad is locked. See "Keyguard," p. 20.

Your phone is set to the silent profile. See "Profiles," p. 27.

The alarm clock is set to on. See "Alarm clock," p. 52.

The countdown timer is running.

Phone at a glance

FCC DRAFT

The stopwatch timer is running in the background.

Integrated hands-free is active. See "Loudspeaker," p. 19.

The timed profile is selected. See "Profiles," p. 27.

, , , or An enhancement is connected to the phone.

See "Enhancement settings," p. 40.

Voice privacy encryption is active (or is not active) in the network.

You are in a digital network. See "Network services," p. 6.

or Location info sharing is set to emergency or on. See "Location

info sharing," p. 31.

You are in a 1XRTT network. See "Network services," p. 6.

You are roaming outside your home network. See "Roaming options," p. 43.

Bluetooth connectivity is activated. See "Bluetooth connectivity," p. 37.

■Phone menus

Phone features are grouped according to function and are accessed through the

main menus. Each main menu contains submenus and lists from which you can

select or view items and customize your phone features. To access these menus

and submenus, use the scroll method or a shortcut.

To change your menu view from list to grid, select Menu > Options > Main menu

view > List or Grid.

Select Menu > Options > Main menu view > Organize to arrange the order of the

main menu icons. Use the scroll keys to move up, down, left, or right, and select

Move.

Some features may not be available, depending on your network. For more

information, contact your network operator.

Scroll method

Use the scroll key to scroll up, down, left, and

right through the options.

1. In the standby mode, select Menu, and

scroll through the main menus.

As you scroll through the menus, the menu

number appears in the upper right corner of

the display. Below the battery level

Phone at a glance

FCC DRAFT

indicator is a scroll bar with a tab that moves up or down on the right side of

the display screen as you scroll through the menus, providing a visual

representation of your current position in the menu structure.

2. When you arrive at a menu, press the center of the scroll key to select

submenus.

3. To return to the previous menu, select Back (the right selection key).

To return to the standby mode from any menu or submenu, press the end key.

In-phone help

Many features have brief descriptions (help text) you can view on the display.

To view these descriptions, you must first activate help text as follows.

Select Menu > Settings > Phone > Help text activation > On or Off.

Scroll to a feature, and wait about 14 seconds. Scroll down to view all of the

description, or select Back to exit.

Phone at a glance

FCC DRAFT

■Lock code

Your device has a security option allowing you to lock your phone with a code.

When the code is set and turned on, no outgoing calls are allowed, and the menu

cannot be accessed without entering the correct code first. This prevents

unauthorized outgoing calls or access to any information stored on your device.

The Security option is in the Settings menu. The first time you access the Security

option, you must enter a lock code. The default lock code may vary depending on

your wireless service provider. The preset lock code may be the last four digits of

your phone number, 1234 or 0000. If none of these work, contact your wireless

service provider for help.

You must enter the lock code to access the following Security option:

1. In the standby mode, select Menu > Settings > Security.

2. Enter the lock code, and select OK. See "Change lock code," p. 42.

■Go to functions

The Go to menu enables you to change the function of the left selection key on

your phone. With this function, you can quickly access your most frequently used

functions from the Go to menu in the standby mode.

Choose Go to functions

1. In the standby mode, select Go to > Options > Select options.

2. Scroll up or down to the desired function.

3. Select Mark to add a function or Unmark to remove a function.

4. Select Done when you have added all desired functions, and Yes to save the

changes

Organize functions

1. In the standby mode, select Go to > Options > Organize.

2. Scroll to the function you want to move, and select Move.

3. Use the scroll keys to move the function up or down, and select OK.

Set up your phone

FCC DRAFT

2. Set up your phone

■Antenna

Your device has a fixed antenna located at

the top of the phone with the fold closed.

Hold the phone with the antenna area

pointed up and over your shoulder.

In the Nokia 2365i phone, the internal

GPS antenna is activated when placing

emergency calls or when On is selected

from the Location info sharing menu (a

network-dependent feature). See

"Location info sharing," p. 31.

Note: Do not touch the antenna unnecessarily with the device switched

on. Contact with the antenna affects call quality and may cause the

device to operate at a higher power level than otherwise needed. Not

touching the antenna area during a phone call optimizes the antenna

performance and battery life.

■Insert the battery

Note: Always switch off the power, and disconnect the charger and any

other device before removing the cover. Avoid touching electronic

components while changing the cover. Always store and use the device

with the cover attached.

Slide the back cover off to

remove it (1).

Set up your phone

FCC DRAFT

Insert the battery so that the

gold-colored connectors on the

battery align with the

connectors on the phone (2).

Replace the back cover: align

the catches (3) together, and

slide the cover (4) forward.

Charge the battery

Note: Before you use a charger with this device, check its model number.

This device is intended for use when supplied with power from the

AC-3Ucharger.

1. Plug the charger transformer into a standard wall outlet.

2. Insert the charger output plug into the

round jack at the bottom end of

the phone.

After a few seconds, the battery

indicator on the display starts to scroll

from bottom to top. If the battery is

completely discharged, it may take a

few minutes before the charging

indicator appears on the display or

before any calls can be made.

Warning: Use only batteries,

chargers, and enhancements approved by Nokia for use with this

particular model. The use of any other types may invalidate any approval

or warranty, and may be dangerous.

Set up your phone

FCC DRAFT

■Switch your phone on or off

1. To switch your phone on or off, press and hold the end key for at least 4

seconds.

2. Enter the lock code, if necessary, and select OK. See "Phone lock," p. 41.

Warning: Do not switch the phone on when wireless phone use is

prohibited or when it may cause interference or danger.

■Connect the headset

A compatible headset, such as HS-5,

may be purchased with your phone or

separately as an enhancement. See

"Enhancement settings," p. 40.

1. Plug the headset connector into the

Pop-Port connector at the bottom

end of your phone. appears in

the standby mode.

2. Position the headset on your ear.

With the headset connected, you can make, answer, and end calls as usual:

• Use the keypad to enter numbers.

• Press the send key to place a call.

• Press the end key to end a call.

■Make a call

Keypad

1. Enter the phone number (including the area code), and press the send key.

(To delete a character to the left of the cursor, select Clear.)

2. Press the end key to end the call, or select End call to cancel the call attempt.

Contacts list

1. In the standby mode, scroll down to display your contacts list and highlight

your desired entry.

2. Select Details to highlight your desired number; then select Call.

Set up your phone

FCC DRAFT

Last dialed number

1. In the standby mode, press the send key to display the last 20 numbers dialed.

2. Scroll to the number (or name) you want to redial, and press the send key.

Conference calling

Conference calling is a network service that allows you to take part in a

conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or select Find to retrieve a

number from the contacts list. Select Call. The first participant is put on hold.

4. When the second participant answers, press the send key to connect the calls.

5. To end the conference call, select Options > End all calls, or press the end key.

■Answer calls

Incoming call

1. With the fold open, press the send key, or select Answer to answer the call.

2. Press the end key to reject the call.

Select Silence to mute the ringing tone, then Dismiss, or do nothing. The call

is eventually diverted to voicemail.

With your phone set to silent in the profiles menu, select Dismiss to divert the

call to voicemail.

3. With the fold closed, press the volume key to mute the ringing tone.

By default, your phone answers an incoming call when you open the fold. You can

change the setting to not answer the call when the fold opens.

Select Menu > Settings > Call > Answer when fold is opened > On or Off.

Adjust the earpiece volume

Whether in or out of a call, you can scroll the volume key up or down to adjust

the volume of the earpiece. When you adjust the volume, a bar chart indicates

the volume level.

Set up your phone

FCC DRAFT

Answer a call with the keypad locked

To answer a call with the keypad locked, press the send key with the fold open.

During the call, all features function as normal. When you end or reject the call,

the keypad automatically relocks. See "Keyguard," p. 20.

When the keypad lock is on, calls still may be possible to the official emergency

number programmed into your device. Enter the emergency number, and press

the send key.

Loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is

in use because the volume may be extremely loud.

• To activate the loudspeaker during a call, select Loudsp. and close the fold.

• To deactivate the loudspeaker during a call, open the fold and select Handset.

The loudspeaker is automatically deactivated when the call ends.

The loudspeaker is deactivated when a call (or call attempt) ends or when certain

enhancements are connected.

Call options

Many of the options you can use during a call are network services. Check with

your network operator for more information.

1. Select Options during a call to display the following options:

Loudspeaker or Handset—Activate or deactivate the loudspeaker.

New call—Start a conference call. See "Conference calling," p. 18.

Save—Save a new number to your contacts list. This option is available only

when entering numbers during a call.

Add to contact—Add a phone number to a contact in your contacts list. This

option is available only when entering numbers during a call.

End all calls—Disconnect from all active calls.

Touch tones—Enter the numbers, and select Tones to send the numbers as tones.

Contacts—View the contacts menu.

Menu—View the phone menu.

2. Select an option to activate the option or enter its submenu.

Set up your phone

FCC DRAFT

■Keyguard

With the keyguard, you can lock the keypad to prevent keys from accidental

presses. The locked keypad unlocks when you receive a call. After the call, the

lock automatically reactivates.

With the keyguard on, calls still may be possible to the official emergency

number programmed into your phone. Enter the emergency number, and press

the send key.

Lock the keypad

Select Menu; then press * within 2 seconds.

Unlock the keypad

Select Unlock; then press * within 2 seconds.

Gallery

FCC DRAFT

3. Gallery

You can save recordings, and ringing tones to folders in the Gallery and add new

folders. You can download tones with text messages.

Your device supports a digital rights management system to protect content you

have acquired. Content such as ringing tones, can be protected and associated

with certain usage rules, for example, the number of usage times or a certain

usage period. Usage rules are defined in the content activation key that can be

delivered with the content or delivered separately. You may be able to update the

activation key. Always check the delivery terms of any content and activation key

before acquiring them, as they may be subject to a fee.

being copied, modified, transferred, or forwarded.

Your device has about 1 MB of memory for storing files in the Gallery. This memory

is not shared with other functions, such as contacts. If the device displays a

message that the memory is full, delete some existing files before proceeding.

■Folders

1. Select Menu > Gallery > Themes, Graphics, Tones, Recordings, or a folder you

created.

2. Select Open to view a list of the files in the folder or Options to access

the following:

Delete folder —Delete a folder you have created. You cannot delete a

preset folder.

Move—Move the selected folder into another folder. After selecting Move,

scroll to another folder, and select Move to. You cannot move a preset folder.

Rename folder—Rename a folder you have created. You cannot rename a

preset folder.

Details—Show the name, size, and date of creation of the selected folder.

Type of view > List with details, List, or Grid—Determine how to display the

folders and files within them.

Sort—Sort the contents of the selected folder by name, date, format, or size.

Add folder—Create a new folder.

Memory status—Check the available memory for the device handset.

Gallery

FCC DRAFT

Activation key list—View the list of available activation keys. You can delete

activation keys if desired.

Mark or Unmark—Mark or unmark folders to be deleted or moved.

Mark all—Mark all folders to be deleted.

Recent calls

FCC DRAFT

4. Recent calls

Recent calls stores information about the last 20 missed, received, or dialed calls.

It also displays the total duration of all calls. When the number of calls exceed

the maximum, the most recent call replaces the oldest.

When viewing missed, received, or dialed calls, the menu options are the same:

Time of call—Display the date and time of the call.

Send message—Send a message to the number.

Use number—Edit the number and associate a name with the number.

Save—Enter a name for the number and save it to your contacts list.

Add to contact—Add the number to an existing name in your contacts list, if the

number is not associated with a name.

Delete—Clear the number from memory.

Call—Call the number.

■View missed calls

Missed calls are calls that were never answered. The missed calls feature does not

function when your phone is switched off.

1. Select Menu > Recent calls > Missed calls; if a missed call notification

appears, select List.

2. Scroll to a name or number, select Options, and an option.

■View received calls

Received calls are calls that have been answered.

1. Select Menu > Recent calls > Received calls.

2. Scroll to a name or number, select Options, and an option.

■View dialed numbers

Dialed calls are numbers you have previously dialed from your phone:

1. Press the send key; or select Menu > Recent calls > Dialed numbers.

2. Scroll to a name or number, and select Options and an option.

Recent calls

FCC DRAFT

■View message recipients

You can view recipients of messages you have sent. Select Menu > Recent calls >

Message recipients.

■Time of call

You can make or receive up to five calls to or from the same number and view the

time each call occurred. Your clock must be set for this feature to work

accurately.

1. While viewing a missed, received, or dialed call, select Options > Time of call.

2. Scroll down to view the most recent call times from this number.

3. Select Back to return to the options list.

■Clear log lists

You can delete any missed, dialed, or received calls from phone memory.

Select Menu > Recent calls > Clear log lists > All call lists, Missed calls, Received

calls, Dialed numbers, or Msg. recipients.

■Call timers

Note: The actual invoice for calls and services from your service

provider may vary, depending on network features, rounding off for

billing, taxes, and so forth.

To view the duration of your calls, select Menu > Recent calls > Call timers and

one of the following options:

Last call duration—Check the time of your last call.

Dialed calls' duration—Check the combined time of calls you dialed for either

Home or Roaming.

Received calls' duration—Check the combined time of calls you received for either

Home or Roaming.

All calls' duration—Check the combined time of all calls.

Life timer—Check the total airtime minutes logged on your phone.

Clear timers—Enter your lock code, and select OK to clear all timers on your

phone.

Recent calls

FCC DRAFT

Note: Some timers, including the life timer, may be reset during service

or software upgrades.

Media

FCC DRAFT

5. Media

■Voice recorder

You can record pieces of speech or sound with your device and listen to them

later. The total available time is 3 minutes with no memos stored. The maximum

length of a recording depends on how much memory remains available. Select

Menu > Media > Recorder > Record to start the recording or Recordings list to

manage the folder you have defined for recording storage.

Record speech or sound

1. Select Menu > Media > Recorder.

2. To start the recording, select the record virtual button using the right and left

scroll keys; press Select.

3. Hold the phone in the normal position near your ear, and record your

message.

4. When you are finished recording, select the stop virtual button.

The recording is given a default name and saved to the Recordings list. The

default location of the Recordings list is the Recordings folder in the Gallery.

After you have made a recording, select Options > Play last recorded to replay the

recording.

Options

After saving a recording to the Recordings folder, highlight a recording, and select

Open to listen to the recording; or select Options and one of the following:

Delete—Erase the recording.

Rename—Change the name of the recording.

Use tone—Use your recording as a ringing tone (a network-dependent feature).

Details—Show the name, size, and date of creation of the recording.

Type of view > List with details, List, or Grid—Determine how to display the recording.

Sort—Sort the contents of the recording by name, date, format, or size.

Mark—Mark recordings to delete.

Mark all—Mark all recordings to be deleted.

Settings

FCC DRAFT

6. Settings

Use this menu to change profiles, themes, main display settings, mini display

settings, tone settings, time and date settings, call settings, phone settings, voice

commands, enhancement settings, security settings, application settings, network

settings, network services, and restore factory settings.

■Profiles

Profiles define how your device reacts when you receive a call or message and

how your keypad sounds when you press a key. You can leave ringing options,

keypad tones, and other settings for each of the available profiles at their default

setting, or customize them to suit your needs.

Profiles are also available for enhancements such as the headset and car kit.

See "Enhancement settings," p. 40.

To activate a profile, select Menu > Settings > Profiles > Normal, Silent, Meeting,

Outdoor, My profile 1, or My profile 2 > Activate.

Customize a profile

You can customize any of the profiles in various ways.

1. Select Menu > Settings > Profiles.

2. Select the profile you want to customize.

3. Select Customize and the option you want to customize.

Set a timed profile

You can use timed profiles to prevent missed calls. For example, suppose you

attend an event requiring your device set to Silent before the event starts, but

you forget to return it to Normal until long after the event. A timed profile can

prevent missed calls by returning your device to the default profile at a time you

specify. You can set timed profiles up to 24 hours in advance.

1. Select Menu > Settings > Profiles.

2. Select the profile you want to activate and Timed for timed expiration.

3. Enter the time in hh:mm format for the profile to expire, and select OK.

Settings

FCC DRAFT

■Main display

The main display is inside the cover.

Standby mode settings

You can choose settings for the display of the standby screen on the main display.

Wallpaper

Select Menu > Settings > Main display > Standby mode settings > Wallpaper

and one of the following:

On—Activate wallpaper on your phone.

Off—Deactivate wallpaper on your phone.

Image—Choose an image from the Gallery for wallpaper.

Slide set—Choose an image or slide set from the Gallery for wallpaper.

Font color

To set the font color of your phone when in the standby mode, select Menu >

Settings > Main display > Standby mode settings > Standby mode font color.

Scroll to select a color from the color grid.

Screen saver

To choose a screen saver for the main display, select Menu > Settings > Main

display > Screen saver and one of the following:

On—Activate the screen saver on your phone.

Off—Deactivate the screen saver on your phone.

Screen savers > Image, Slide set, Digital clock—Select an image, or other option

to act as your screen saver.

Time-out—Modify the idle time before the screen saver activates.

Power saver is automatically activated after the time-out of the screen saver to

optimize battery life.

Power saver

When this feature is enabled, the display shows only a simplified display after a

time-out period. Select Menu > Settings > Main display > Power saver > On or

Off.

Settings

FCC DRAFT

Sleep mode

Sleep mode is a power-saving feature that turns off the main display during

inactivity. To activate the sleep mode feature on your phone, select Menu >

Settings > Main display > Sleep mode > On or Off.

When Sleep mode is activated the display is completely blank. A blinking LED

indicates that the phone is still on.

Choose a banner

Choose whether the display shows the operator logo when the phone is in the

idle state. Select Menu > Settings > Main display > Banner > Default or

Customize.

Backlight time-out

To control the time-out of the backlight on your phone, select Menu > Settings >

Main display > Backlight time-out.

■Mini display

The mini display is outside the cover.

Power saver

When this feature is enabled, the display shows only a simplified display after a

time-out period. Select Menu > Settings > Mini display > Power saver > On or

Off.

Sleep mode

Sleep mode is a power-saving feature that turns off the mini display during

inactivity. To activate the sleep mode feature on your phone, select Menu >

Settings > Mini display > Sleep mode > On or Off.

When Sleep mode is activated the display is completely blank. A blinking LED

indicates that the phone is still on.

■Themes

A theme contains many elements for personalizing your phone, such as wallpaper,

screen saver, color scheme, and a ringing tone.

Settings

FCC DRAFT

Themes automatically loads wallpapers, screen savers, ringing tones and

background colors. Selecting a theme over-writes previous settings. Individual

settings for a theme can be overwritten independently in the settings menu. For

example, a theme selects a wallpaper, a screen saver, and a default ringing tone.

The default ringing tone within a theme can be overwritten. See "Tone settings,"

p. 30.

1. Your phone has a default theme. To choose the theme on your display, select

Menu > Settings > Themes > Select theme > Themes.

2. Scroll to a theme, and select Apply.

■Tone settings

You can adjust the ringing volume, keypad tones, and more for the active profile.

See "Customize a profile," p. 27 for more information on profile settings.

Select Menu > Settings > Tones and one of the following:

Incoming call alert—Select how the device notifies you of an incoming call.

Ringing tone—Select the ringing tone for incoming calls.

Ringing volume—Set the volume of your ringing tone.

Vibrating alert—Set the vibrating alert off or on.

Message alert tone—Select the tone for received messages.

Keypad tones—Set the volume of your keypad tones (or turn them off).

Warning tones—Set warning and confirmation tones on or off.

Alert for—Define which caller groups the selected profile will accept or decline.

See "Caller groups," p. 47.

■Time and date settings

Clock

Select Menu > Settings > Time and date > Clock > Show clock, or Hide clock, Set

the time, Time zone or Time format.

Date

Select Menu > Settings > Time and date > Date > Show date or Hide date, Set the

date, Date format, or Date separator.

Settings

FCC DRAFT

Date and time auto-update

Auto-update is a network service. See "Network services," p. 6. If your network

operator supports this feature, you can allow the digital network to set the clock,

which is useful when you travel to another network or time zone.

Select Menu > Settings > Time and date > Auto-update of date & time > On,

Confirm first, or Off.

If you use the Auto-update of date & time option while outside the digital

network, you may be prompted to enter the time manually. Network time

replaces the time and date when you reenter your digital network.

If your battery has been removed or has discharged outside the digital network,

you may be prompted to enter the time manually (when the battery is replaced or

recharged, and you are still outside of the digital network).

■Call settings

Location info sharing

Location info sharing is available for the Nokia 2365i device. Location info

sharing is a network service. See "Network services," p. 6.

If your wireless service provider supports this feature, then location info sharing

allows the device to share position information over the network. For calls to

emergency numbers, this position information may be used by the emergency

operator to determine the position of the device. The functionality and accuracy

of this feature are dependent on the network, satellite systems, and the agency

receiving the information. This feature may not function in all areas or at all

times.

Select Menu > Settings > Call > Location info sharing and from the following:

911 only—This is the default profile. The device location information is shared

only during an emergency call to the official emergency number programmed

into your device. The screen displays in the upper left hand corner in the

standby mode.

Location on—The device location information is shared with the network

whenever the device is powered on and activated. The screen displays in

the upper left hand corner in the standby mode.

Location information is shared with the network during emergency calls to the

official emergency number programmed into the device, regardless of the

setting. After making an emergency call, the device remains in the emergency

Settings

FCC DRAFT

mode for 5 minutes. During this time, the location information is shared with the

network. See "Emergency calls," p. 82.

Anykey answer

Anykey answer enables you to answer an incoming call. Briefly press any key

except the right selection or end key. Select Menu > Settings > Call > Anykey

answer > On or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy

signal when you dial. With automatic redial activated, your device redials the

number (number of times is specified by the network), and notifies you when the

network is available. Select Menu > Settings > Call > Automatic redial > On or

Off.

1-touch dialing

To activate or deactivate 1-touch dialing, select Menu > Settings > Call > 1-

touch dialing > On or Off. See "Set up 1-touch dialing," p. 47.

Open fold to answer

By default, your phone answers an incoming call when you open the fold. You can

change the default setting to have your phone not answer calls with the fold

open. Select Menu > Settings > Call > Answer when fold is opened > On or Off.

Calling cards

If you use a calling card for long distance calls, save the calling card number in

your phone. The phone can store up to four calling cards. Contact your calling

card company for more information.

Save information

1. Select Menu > Settings > Call > Calling card.

2. Enter your lock code, and select OK. See "Security settings," p. 41.

3. Scroll to the calling card of your choice, and select Options > Edit > Select >

Dialing Sequence.

4. Select one of the following sequence types:

Settings

FCC DRAFT

Access no.+phone no.+card no.—Dial the access number code for the calling

card, the phone number, then enter the card number (and PIN code if

required).

Access no.+card no.+phone no.—Dial the access number for the calling card,

card number (plus PIN if required), then enter the phone number.

Prefix+phone no.+card no.—Dial the prefix (numbers that must precede the

phone number) and phone number, then enter the card number (and PINcode

if required).

5. Enter the required information (access number or prefix and card number),

and select OK to confirm your entries.

6. Select Card name > enter the card name > OK.

Select a calling card

You can select one of the calling cards for which you have saved information. The

selected card information is used when you make a card call.

1. Select Menu > Settings > Call > Calling card.

2. Enter your lock code, and select OK. See "Security settings," p. 41.

3. Scroll to the calling card of your choice, and select it.

Make card calls

After you have selected a calling card, make a card call.

1. Enter the phone number, including any prefix (such as 0 or 1) that your

calling card may require when you make a calling card call. See your calling

card for instructions.

2. Press and hold the send key for a few seconds until Card call is displayed.

3. Follow the instructions on the screen.

4. When you hear the tone or system message, select OK.

International prefix

You can store an international dialing prefix into your device. In the standby

mode, select Menu > Settings > Call > International prefix. In the standby mode,

when you enter + (press * twice) at the beginning of a phone number, your device

automatically inserts the international dialing prefix that you have stored after

you press the call key. See "Insert dialing codes," p. 73.

Settings

FCC DRAFT

Call summary

To display the time spent on a call when you hang up, select Menu > Settings >

Call > Call summary > On or Off.

Show call time

To see the call time on the display screen after each call, select Menu >

Settings > Call > Show call time on display > On or Off.

Ringing tone for no caller ID

To select a different ringing tone for calls received with no caller ID or restricted

numbers, select

Menu > Settings > Call > Ringing tone for no caller ID > On or Off.

■Phone settings

Phone language settings

The phone language affects the time and date formats of the clock, and alarm

clock. Select Menu > Settings > Phone > Phone language and the language of

your choice.

Automatic keyguard

You can set the keypad of your device to lock automatically after a preset time delay.

1. Select Menu > Settings > Phone > Automatic keyguard > On or Off.

2. If you select On, Set delay: is displayed.

3. Enter the delay time (in mm:ss format), and select OK.

When keyguard is on, it may be possible to dial the emergency number programmed

into your device.

Navigation key

If supported by your wireless service provider, you can set the features that are

activated when you press the scroll key.

1. Select Menu > Settings > Phone > Navigation key.

2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select

Change.

Settings

FCC DRAFT

3. Select a function to assign to the action.

Memory status

To view the size of available memory on your device, select Menu > Settings >

Phone > Memory status.

To view the size of available memory for application installations, select Menu >

Extras > Games or Collection > Options > Memory status.

Touch tones

Touch tones, or DTMF tones, are the tones that sound when you press the keys on

your device keypad. You can use touch tones for many automated dial-up services

such as banking and airlines or for entering your voice mailbox number and password.

Touch tones are sent during an active call. You can send them manually from

your device keypad, or send them automatically by saving them in your device.

Set type

Select Menu > Settings > Phone > Touch tones > Manual touch tones and one of

the following options:

Continuous—Set the tone sound for as long as you press and hold a key.

Fixed—Send tones of the duration you specify in the Touch tone length option.

Off—Turn off tones. No tones are sent when you press a key.

Set length

To specify touch-tone length for the Fixed option, select Menu > Settings >

Phone > Touch tones > Touch tone length > Short (0.1 seconds) or Long (0.5

seconds).

Start-up tone

To have a start-up tone when you first turn on your device, select Menu >

Settings > Phone > Start-up tone > On or Off.

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 14 seconds, and wait for the help text to be

displayed. To scroll through the text, use the scroll key.

Settings

FCC DRAFT

The default setting for help text is On. To turn help text on or off, select Menu >

Settings > Phone > Help text activation > On or Off.

■Voice commands and voice tags

Before using voice tags, note the following:

• Voice tags are not language-dependent, but depend on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags, and use them

in a quiet environment.

• Very short names are not accepted. Use long names, and avoid similar names

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely on voice dialing in all circumstances.

Hands-free operation

You can set as many as 15 voice commands to enable hands-free operation of

certain features in your device.

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device function.

1. Select Menu > Settings > Voice commands.

2. Select the device function you want to tag: Profiles, Messages,

Voice recorder, or Recent calls.

3. If necessary, select an option associated with that function.

4. Select Start, and speak the voice tag clearly into the microphone. Do not

select Quit unless you want to cancel the recording.

The device replays and saves the recorded tag. appears next to commands

with assigned voice tags .

Activate a voice command

After you have associated a voice tag with a function in your device, to issue a

command, speak the voice tag.

1. In the standby mode, press and hold the right selection key.

2. With Speak now displayed, pronounce the voice tag clearly into the microphone.

With the voice tag found, the device displays Found:, and plays the recognized

voice tag through the earpiece. The function you requested is activated.

Settings

FCC DRAFT

Options

After you have associated a voice tag to a command, you can select one of the

following options:

Playback—Press the center selection key to listen to the voice command tag.

Change—Select Options > Change to change the voice command.

Delete—Select Options > Delete to erase the voice command tag.

■Connectivity

You can connect the phone to a compatible device using a Bluetooth wireless

connection. You can also connect the phone to a compatible PC using Bluetooth

connectivity.

Important: Only install and use applications and other software from

sources that offer adequate security and protection against harmful

software.

Bluetooth connectivity

Bluetooth technology enables cost-free wireless connections between electronic

devices. It can also be used to connect wirelessly to other products that use

Bluetooth wireless technology, such as Bluetooth headsets and car kits.

Since devices with Bluetooth connectivity communicate using radio waves, your

phone and the other device do not need to be in direct line-of-sight.

The two devices only need to be within 10 meters (30 feet)of each other. The

connection can be subject to interference from obstructions such as walls or

other electronic devices.

Whether used actively or in the background, Bluetooth wireless technology

consumes the battery and reduces the operating time of the phone.

This device is compliant with Bluetooth Specification 2.0 and supports the

following profiles:

• Object push profile (OPP)

• File transfer profile (FTP)

• Dial-up networking profile (DUN)

• Headset profile (HSP)

• Hands-free profile (HFP)

Settings

FCC DRAFT

To ensure interoperability between other devices supporting Bluetooth

technology, use only enhancements approved by Nokia for this model. Check

with the manufacturers of other devices to determine their compatibility with

this device.

There may be restrictions on using Bluetooth technology in some locations.

Check with your local authorities or service provider. If you want more

information on this function, visit the Bluetooth Technology organization

Web site: https://www.bluetooth.org/.

Features using Bluetooth technology, or allowing such features to run in the

background while using other features, increase the demand on battery power

and reduce the battery life.

Pairing

You can set up a permanent association (pairing) between your phone and

another device with Bluetooth technology. Some devices may require pairing

before data transfer can take place.

To pair with a device, you and the owner of the other device must agree on a

passcode of 1–16 numeric characters. The first time you try to connect the

devices, you must each enter the same passcode. After the devices are paired, you

do not need to use the passcode again, so there is no need to remember it.

Paired devices are placed in your paired device list. You can view the list even

when Bluetooth connectivity is not active or when the devices in the list are not

available for connection.

Select Menu > Settings > Connectivity > Bluetooth > Paired devices > Options

and one of the following:

Assign short name—Give a nickname to the selected device (visible to you only).

Auto-conn. with- out confirmation—Select No if you want the phone to connect

to the selected device automatically or Yes if you want the phone to ask for your

permission first.

Delete pairing—Delete the pairing to the selected device.

Pair new device—Search for active devices with Bluetooth technology within

range, scroll to the desired device, and select Pair to establish pairing with that

device. Do not accept Bluetooth connectivity from sources you do not trust.

Bluetooth connectivity settings

You can define how your phone is shown to other devices with Bluetooth

connectivity. Select Menu > Settings > Connectivity > Bluetooth > Bluetooth

settings and one of the following:

Settings

FCC DRAFT

My phone's visibility—Select Shown to all to show the phone to all other devices

with Bluetooth connectivity or Hidden to show the phone only to the paired

devices. Operating the phone in hidden mode is a safer way to avoid malicious

software.

My phone's name—Change your phone name that is seen by other users.

Set up a connection

1. Select Menu > Settings > Connectivity > Bluetooth > On. The active

Bluetooth technology connection is indicated by at the top of the display.

2. Select Search for audio enhancements to search for compatible devices with

Bluetooth connectivity. The list of found devices appears in the display.

3. Select the desired device. If required, enter the Bluetooth connectivity

passcode of the device to complete the pairing.

4. If required, enter the Bluetooth connectivity passcode of the device to pair

with the device.

Your phone connects to the device. To view the device you are connected to,

select Menu > Settings > Connectivity > Bluetooth > Active device.

To deactivate Bluetooth connectivity, select Menu > Settings > Connectivity >

Bluetooth > Off. Deactivation of the Bluetooth technology connection does not

affect other functions of the phone.

Pair a Bluetooth headset to a phone

1. Switch on your phone and the headset.

2. Activate the Bluetooth feature on the phone, and set the phone to search for

Bluetooth devices.

3. Select the headset name from the list of found devices.

4. Enter the Bluetooth passcode 0000 to pair and connect the headset to your

phone. In some phones you may need to make the connection seperately after

pairing. You only need to pair the headset with your phone once.

If the pairing is successful, the headset beeps and appears in the phone menu

where you can view the currently paired Bluetooth devices.

Pair a car kit to a phone with a Bluetooth connection

The first time you establish a wireless link from your car kit using Bluetooth

technology, you must pair the handsfree unit with your phone. This only needs to

be done once.

Settings

FCC DRAFT

1. Switch on your phone and the car kit.

2. Activate the Bluetooth feature on the phone, and set the phone to search for

Bluetooth devices.

3. Select the car kit from the list of found devices.

4. Enter the Bluetooth passcode. The passcode is on a sticker attached to the car

kit user guide.

The Bluetooth passcode is a four-digit number that corresponds to the last

four digits in the serial number supplied with the car kit.

The car kit can only establish a Bluetooth wireless connection to one compatible

phone.

■Enhancement settings

The enhancement settings menu is shown only if the device has been connected

to a compatible enhancement. Select Menu > Settings > Enhancements >

Headset , TTY/TDD, Charger, or Hearing aid.

Headset

Important: The headset may affect your ability to hear sounds around

you. Do not use the headset in situations that may endanger your safety.

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you want automatically activated with a

headset connected.

Automatic answer > On or Off—Answer calls automatically after one ring with a

headset connected.

TTY/TDD

To use TTY/TDD with your device, select Menu > Settings >

Enhancements > TTY/TDD.

Charger

Select an option to modify its settings.

Default profile—Choose the profile you want automatically activated with your

device connected to the charger.

Settings

FCC DRAFT

Lights—Choose to keep the device lights always on, or to shut off automatically

after several seconds.

■Security settings

When first accessing the security settings, enter the preset lock code. Depending

on your wireless service provider, this can be the last four digits of your phone

number, 1234, or 0000. If none of these work, contact your wireless service

provider for help.

Phone lock

The phone lock feature protects your device from unauthorized outgoing calls or

unauthorized access to information stored in the device. With the phone lock

activated, Phone locked is displayed each time you turn your device on or off.

With the device locked, calls may still be possible to the official emergency

number programmed into your device.

1. Select Menu > Settings > Security.

2. Enter the lock code, and select OK. See "Change lock code," p. 42.

3. Select Phone lock and one of the following options:

Off—Immediately turns off the device lock feature.

Lock now—Immediately turns on the device lock feature.

On power-up—Turns on the device lock feature the next time you turn the

device on.

With Lock now selected, you must enter your lock code before the device can

function normally.

Call not allowed is displayed if you attempt to place a call with your device

locked. To answer a call with the phone lock on, select Answer, or press the send

key.

Allow numbers

With the phone lock on, the only outgoing calls you can make are to the

emergency number programmed into your device or the number stored in the

Allowed no. when phone locked location:

1. Select Menu > Settings > Security.

2. Enter the lock code, and select OK. See "Change lock code," p. 42.

Settings

FCC DRAFT

3. Select Allowed no. when phone locked. With an empty folder selected, select

Assign, and enter the phone number; or select Assign > Find to recall the

number from your contacts list. Select OK.

To call the allowed phone number, scroll down to highlight the number you want

to call, or enter it on the keypad; press the send key to place the call.

Change lock code

To ensure the security of your device, you may want to change the preset lock code

to your own selected four digit number. Avoid using codes similar to emergency

numbers to prevent accidental dialing of the emergency number.

With the wrong lock code entered five times in succession, your phone will not

accept your correct lock code for 5 minutes, even if you power off the device

between incorrect entries.

1. Select Menu > Settings > Security.

2. Enter the lock code, and select OK.

3. Select Change lock code.

4. Enter the new lock code (must be 4 characters in length).

5. Reenter the new lock code for verification, and select OK.

When changing your lock code, make sure you store it in a safe place, away from

your device.

Call restrictions

Select call restrictions to block or allow numbers for outgoing and incoming calls.

With restricted calls, you may still call the official emergency number

programmed into your device. Contact your service provider for more

information.

1. Select Menu > Settings > Security.

2. Enter the lock code, and select OK. See "Change lock code," p. 42.

3. Select Call restrictions.

4. Select the types of calls you want to restrict:

Restrict outgoing calls > Blocked numbers or Allowed numbers > Select, Add

restriction, Edit, or Delete—Calls cannot be made.

Restrict incoming calls > Blocked numbers or Allowed numbers > Select, Add

restriction, Edit, or Delete—Calls cannot be received.

Settings

FCC DRAFT

Voice privacy

Voice privacy is a network service. See "Network services," p. 6. If your wireless

service provider supports this feature, the voice privacy feature protects the

privacy of your current phone conversation from other callers placing phone calls

on your same network.

1. Select Menu > Settings > Security.

2. Enter the lock code, and select OK. See "Change lock code," p. 42.

3. Select Voice privacy > On or Off.

■Network

The menu options you see in your device depend on your network operator’s

network. Check with your network operator for more information.

The Network menu enables you to customize the way your device chooses a

network in which to operate while you are within or outside of your primary or

home system. Your device is set to search for the most cost-effective network. If

your device cannot find a preferred network, it selects a network automatically

based on the option you choose in the Network menu.

Roaming options

You can set your device to roam or search for another network when you are not

in your home area.

1. Select Menu > Settings > Network > Roaming options and one of the

following options:

Home only—You can make and receive calls in your home area only.

Automatic A—The device automatically searches for service in another digital

network. The roaming rate applies when not in the home service area.

Automatic B—The device automatically searches for service in another digital

network. The roaming rate applies when not in the home service area.

2. Select OK, if necessary, to confirm the activation.

Mode

To choose whether your device uses digital preferred or digital only, select

Menu > Settings > Network > Mode and the following service option:

Digital only—The device only works in digital mode.

Settings

FCC DRAFT

Roam call alert tones

To activate alert tones for roaming calls, select Menu > Settings > Network >

Roam call alert tones.

■Network services

The following features are network services. See "Network services," p. 6.

Store a feature code

1. Select Menu > Settings > Network services > Network feature setting.

2. Enter the feature code from your network operator (for example, *633), and

select OK.

3. Select the type of service that matches the feature code you entered (for

example, Call forwarding).

The activated feature code is now stored in your device, and you are returned

to the Feature code: field. Continue entering other feature codes (for

example, *633), or press the end key to return to the standby mode. When you

enter a network feature code successfully, the feature becomes visible in the

Network services menu.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number.

Call forwarding is a network service and may not work the same in all networks,

so contact your network operator for availability.

Activate

The following options may not all appear in the display. Contact your network

operator for more information.

1. Select Menu > Settings > Network services > Call forwarding > Forward all

calls, Forward if busy, Forward if not answered, or Forward if out of reach >

Activate.

2. Enter the number to which you want to forward your calls, or other

information, and select OK.

Cancel

Select Menu > Settings > Network services > Call forwarding > Cancel all call

forwarding. Cancel all call forwarding may affect your ability to receive voice

mail messages. Contact your network operator for specific details.

Settings

FCC DRAFT

Call waiting

If your network operator supports this feature, call waiting notifies you of an

incoming call even while you are in a call. You can then accept, reject, or ignore

the incoming call.

1. Select Menu > Settings > Network services > Call waiting > Activate or

Cancel.

2. During a call, select Answer, or press the send key to answer the waiting call.

The first call is put on hold.

3. Press the end key to end the active call.

Send caller ID

If your network operator supports this feature, you can allow or prevent your

number from appearing on the receiving caller ID. Select Menu > Settings >

Network services > Send my caller ID > Yes or No.

My number selection

Select Menu > Settings > Network services > My number selection. This feature

is network-dependent.

■Phone details

To view the current details of your phone, select Menu > Settings > Phone details

and one of the following options:

My number—Shows the phone’s current number details.

Software version—Shows the phone model, hardware, and software version

information for the phone.

System details—Shows the digital network the phone is on.

Icon glossary—Shows the icons used.

Contacts

FCC DRAFT

7. Contacts

The contacts list can hold up to 250 contacts with multiple numbers and text notes

for each contact. The amount of numbers and text entries you can save may vary,

depending on the length and total number of entries in the contacts list.

■Add new contacts

To access the contacts list in the standby mode, press the right selection key, or

select Menu > Contacts > Names if the right selection key on your device has a

network operator menu.

Save contact name and number

1. In the standby mode, enter the phone number you want to save.

2. Select Save.

3. Enter the name, and select OK.

Save contact number only

1. In the standby mode, enter the phone number you want to save.

2. Select and hold Options.

Save an entry

1. Select Menu > Contacts > Names > Options > Add new.

2. Enter the name, and select OK.

3. Enter the phone number, and select OK > Back.

Save numbers and text items

You can save different types of phone numbers and short text items per name to

the contacts list. The first number you save for any entry is automatically set as

the default, or primary number, which you can always change.

1. In the standby mode, scroll down to display your contacts list, and highlight

the entry to which you want to add a phone number or text item.

2. Select Details > Options > Add detail > Number (General, Mobile, Home, Work,

or Fax), E-mail address, Web address, Street address, Note, or Tone.

3. Enter the number or text for the type you have selected, and select OK.

Contacts

FCC DRAFT

4. To change a number type, highlight the number, and select Options > Change

type > General, Mobile, Home, Work, or Fax.

Change default number

You can change the default (primary) number for the contact entry.

1. In the standby mode, scroll down to select the contact entry you want to

change, and select Details.

2. Scroll to the number you want to set as default, and select Options > Set as

default.

Caller groups

You can add contacts list entries to any of five caller groups, and assign a unique

ringing tone or graphic to that group. This enables you to identify callers from the

group by their unique ringing tone or graphic.

1. To assign an entry in your contacts list to a caller group, select your desired

contact entry, and Options > Add to group.

2. To manage your caller groups, select Menu > Contacts > Groups > Group

details to display the following caller group options:

Group name—Rename the group.

Group ringing tone—Set the ringing tone for the group.

Group image > Add or Change—Set the graphic for the caller group.

Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9. To dial those

entries, press and hold the assigned key. See "1-touch dialing," p. 32 to activate

or deactivate 1-touch dialing.

Assign a key to 1-touch dialing

1. Select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot, and select Assign.

3. Enter the number (including the area code) and a name for the number, or

select Search to retrieve a number from the contacts list; select OK.

If 1-touch dialing is off, the device displays a prompt and asks if you want

to turn 1-touch dialing on.

Contacts

FCC DRAFT

4. Select Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. Select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you want to change, and select

Options >Change.

3. Enter the new number and a name for the entry, or select Find to retrieve a

number from the contacts list; select OK.

Delete 1-touch dialing numbers

1. Select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you want to delete, and select Options >

Delete > Yes.

■Voice tags

You can dial up to 25 stored numbers using voice dialing.

Before using voice tags, note the following:

• Voice tags are not language-dependent. They depend on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them

in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely on voice dialing in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. In the standby mode, scroll to the entry in your contacts list to which you

want to assign a voice tag.

2. Select Details > Options > Add voice tag > Start.

3. Speak clearly into the microphone. Do not select Quit unless you want to

cancel the recording. The device automatically stops recording, and saves and

replays the voice tag.

appears next to commands that have voice tags assigned.

Contacts

FCC DRAFT

Dial a number

1. In the standby mode, press and hold the right selection key with the fold open.

2. When you hear several beeps and Speak now appears, release the key.

3. Pronounce the voice tag clearly into the microphone.

When the device finds the voice tag, Found: appears, and the device

automatically dials the number. If the device does not locate a number or

recognize the voice tag, No match found appears.

Assign voice tags

1. After you have associated a voice tag to a contact, select Menu > Contacts >

Voice tags and your desired voice tag entry.

2. Select Playback, Change, or Delete.

■Edit contacts list entries

1. Select Menu > Contacts > Names, and scroll to the entry you want to edit in

your contacts list.

2. Select Details > Options and one of the following options, which may vary

depending on whether you are editing a contact listed by phone number or

contact name:

View—View the phone number of the contact.

Add detail—Add more details to the contact: Name (only available with no

name added), Number (General, Mobile, Home, Work, or Fax), E-mail address,

Web address, Street address, Note, or Tone.

Edit name, Edit number, Edit detail, or Change image—Edit an existing

contact name, phone number, details, or image attached to the contact.

Delete—Delete more details (Delete number, Delete detail, or Delete detail)

or the entire contact entry (Delete contact) of the contact.

Send message—Create and send the contact a text message message.

Use number—Use or save the number (available when you select a contact

listed with a contact name). Select Options to use the number.

Set as default—Change the default number of the contact.

Change type > General, Mobile, Home, Work, or Fax—Change the number type.

Contacts

FCC DRAFT

Add voice tag or Voice tag—Add a voice tag to the contact if no voice tag

assigned, or select Playback, Change, or Delete if a voice tag is assigned.

Send bus. card—Send the contact as a business card to another device.

Add to group—Add the contact to an existing caller group.

1-touch dialing—Add the contact to your 1-touch dialing list.

3. Edit the option to your preference, and select OK.

■Delete contacts entries

To delete all entries in your contacts list, in the standby mode, select Menu >

Contacts > Delete all contacts.

■Access the contacts menu

1. In the standby mode, select Menu > Contacts and one of the following options:

Names—View the entries in your contacts list, and select Details or Options >

Search, Add new, Add new group, or Delete contact for your selected entry.

Settings—Change the contacts list view or check the memory status of

your device.

Groups—View and edit the properties of any of the caller groups on

the device.

Voice tags—Listen to, modify, or delete a voice tag to a contact in the

contacts list.

1-touch dialing—View or modify the list of 1-touch dialing numbers.

Own number—View your own phone number.

Delete all contacts—Delete all entries in your contacts list.

2. Select an option to activate the feature or access its submenu.

Search for a name

1. In the standby mode, scroll down to display the contents of your contacts list.

2. Press the key corresponding to the first letter of the name for which you

are searching.

3. Scroll to select a contact, and select Details to view the details.

Contacts

FCC DRAFT

Configure settings

You can select how the contacts appear in your contacts list and view the amount

of used or available memory in your device. Select Menu > Contacts > Settings >

Scrolling view to change the view of the name list or Memory status to view the

used and remaining device memory.

■Send and receive contacts

You can send and receive an entry in your contacts list using text messaging, if

supported by your network operator.

Send a business card

You can send a business card as a text message to a compatible phone or other

handheld device.

1. Highlight your desired entry from your contacts list, and select Options >

Send bus. card > Via text message. Primary number and All details options

appear only if you have more than one number or detail saved to the contact

entry.

2. Enter the number for your recipient, or select Search to retrieve a number

from your contacts list.

3. Select OK; the business card is sent.

Tools

FCC DRAFT

8. Tools

Your phone contains features to help organize your everyday life, including an

alarm clock, calendar, calculator, countdown timer, and stopwatch.

■Alarm clock

Set an alarm

The alarm clock is based on the phone clock. It sounds an alert any time you

specify and even works if the phone is turned off.

1. Select Menu > Tools > Alarm clock > Alarm time.

2. Enter the time for the alarm in hh:mm format, and select OK.

3. Select am or pm if 12-hour clock format is on.,mn

Alarm on appears briefly in the display, and appears in the standby mode.

If you need to reset the alarm select Menu > Tools > Alarm clock > Alarm time >

On from the standby mode.

To turn off the alarm, select Menu > Tools > Alarm clock > Alarm time > Off from

the standby mode.

Repeat alarm

You can set the alarm to repeat every day or only on certain days of the week.

1. Select Menu > Tools > Alarm clock > Repeat alarm > On.

2. Check the day or days of the week you wish to repeat the alarm, and select

Mark. Select Unmark to remove a day.

3. Select Done when you have added all desired days.

If you need to revise the days for a repeated alarm, select Menu > Tools > Alarm

clock > Repeat alarm > Repetition days from the standby mode.

If you need to stop a repeated alarm, select Menu > Tools > Alarm clock > Repeat

alarm > Off in the standby mode.

Set the alarm tone

To set which tone to play when the alarm sounds, select Menu > Tools > Alarm >

Alarm tone > Standard or Open Gallery to choose the tone you want to use.

Tools

FCC DRAFT

Set the snooze time-out

You can set the Snooze time-out for the alarm.

Select Menu > Tools > Alarm clock > Snooze time-out and choose a snooze time.

When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the

currently active profile), and lights up.

With the phone on, select Stop to shut the alarm off or Snooze. If you select

Snooze, the alarm stops for 10 minutes.

If you do not press a key, the alarm stops (snoozes) for the Snooze time-out, then

sounds again.

If the alarm time is reached while the phone is switched off, the phone switches

itself on and starts sounding the alarm tone. If you select Stop, the device asks

whether you want to activate the phone for calls. Select No to switch off the

device or Yes to make and receive calls. Do not select Yes when wireless phone

use may cause interference or danger.

■Calendar

The calendar keeps track of reminders, calls you need to make, meetings, memo,

and birthdays. It can even sound an alarm for any of these events.

The default monthly view provides an overview of the selected month and weeks.

You can also jump to a specific date. Any days or dates that appear in bold font

contain calendar notes such as a meeting or reminder. A short summary of notes

for the day appear at the bottom of the screen.

Open calendar

Select Menu > Tools > Calendar.

Scroll to move the cursor in the calendar view.

Calendar options

Select Menu > Tools > Calendar > Options and one of the following:

Week view—View your calendar by weeks. To return to month view select Back,

while in the Week view.

Make a note—Create a note on the selected date.

Go to date—Jump to a specific date. Enter the date (for example, 15/07/2005),

and select OK.

Tools

FCC DRAFT

Go to today—Jump to the current date.

Settings—Modify the calendar settings.

Go to to-do list—Go directly to your to-do list.

Delete all notes—Delete all calendar notes. This option appears only if a calendar

note has been created.

Make a calendar note

You can make a calendar note for a specific date. You can choose from five types

of notes. Your phone asks for further information depending on which note you

select. You can also set an alarm for your note.

1. Select Menu > Tools > Calendar.

2. Scroll to the date for which you want to make a note. Scroll or select

Options > Go to date.

3. Select Options > Make a note and one of the following

Meeting—Enter the subject, and select Save. Enter a location, and select Save.

Enter a start and end time. Choose an alarm option.

Call—Enter the phone number, and select Save. Enter a name, and select

Save. Enter a time. Choose an alarm option. You can also select Options >

Search to search your contacts.

Birthday—Enter the person’s name, and select Save. Enter the year of birth.

Choose an alarm option.

Memo—Enter the subject, and select Save. Enter a start and end date. Choose

an alarm option.

Reminder—Enter the reminder, and select Save. Choose an alarm option.

View calendar notes (day view)

You can view the calendar notes for a day.

1. Select Menu > Tools > Calendar.

2. Scroll to the date you want to view or select Options > Go to date. Days with

notes appear in bold type.

3. Select View to see the list of notes for that day.

Tools

FCC DRAFT

To view a specific note, scroll to the note, and select View again. If there are no

notes for that date, select Add note to create a new calendar note.

Options while viewing a day

When viewing the list of notes for a day, you can scroll to a note, select Options

and one of the following:

Make a note—Create a new note for the selected date.

Delete—Delete the note.

Edit—Edit the note.

Use detail—Use a detail contained in the note.

Move—Move the note to another date on your calendar.

Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly,

monthly, and yearly). Repeat is not available for Birthday note.

Go to date—Jump to another date on your calendar.

Go to today—Return to the current date.

Send note > Send as message or Via calendar—Send a calendar note in calendar

format (vCal), in a text message, in a multimedia message, or directly to another

device.

Copy—Copy the note. You can paste the note to another date.

Settings—Modify the calendar settings.

Go to to-do list—Go directly to your to-do list.

Receive a note in calendar format (vCal)

When you receive a calendar note in calendar-to-calendar format (vCal), your

phone displays Calendar note received.

Select Show to view the calendar note. Select Save to save the note to your

calendar or Options > Discard to discard the note.

Modify calendar settings

Select Menu > Tools > Calendar > Options > Settings and one of the following:

Set the date—Enter the current date, and select OK. Appears only when the date

has not yet been set.

Tools

FCC DRAFT

Set the time—Enter the current time, and select OK. Appears only when the time

has not yet been set.

Time zone—Select your current time zone.

Date format—Select your preferred date format.

Date separator—Select your preferred date separator.

Time format—Select your preferred time format.

Default view—Select a monthly or weekly view.

Week starts—Select the day the week starts.

Auto-delete notes—Select when to delete past notes.

■Notes

You can write text notes with the Notes. You can also send notes using text

messaging or Bluetooth connectivity.

Select Menu > Tools > Notes to see your current list of notes. If there are no

notes, select Add note to create a note. If there are existing notes, scroll to a note,

and select View. Create your note, and select Save.

To write additional notes, select Menu > Tools > Notes > Options > Make a note.

Create your note, select any note options, and select Save.

When you create a note, the following options are available:

Insert time & date—Adds the time and date to your note.

Close—Returns you to the notes list.

Insert smiley—Inserts a smiley into your message.

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary. Option only appears when predictive text

is on.

Insert symbol—Inserts a special character into your message. Option only appears

when predictive text is on.

Writing language—Choose the language you want to use.

Prediction on or Prediction off—Turn predictive text on or off.

Matches—View matches found in the predictive text dictionary for the word you

want to use. This displays only when predictive text is on.

Tools

FCC DRAFT

Send a note

1. Select Menu > Tools > Notes.

2. Scroll to the note you wish to send, and select Options > Send note > Send as

message to send the note in a text message.

Notes options

Select Menu > Tools > Notes > Options and one of the following:

Make a note—Create a new note.

Delete—Delete the note you selected.

Edit—Edit the note you selected.

Use detail—Use a detail contained in the note.

Send note > Send as message—Send a note in a text message.

Delete all notes—Delete all notes.

The note options appear only when you have created one or more notes.

■To-do list

Use the To-do list feature to keep track of your tasks. You can save a task or

errand as a to-do list note, select a priority level for the to-do list note, and mark

it as done when you have completed it. You can sort the to-do list notes by

priority or by date.

Select Menu > Tools > To-do list. You see your current to-do list.

If there are no to-do tasks, select Add note to create your first to-do list note. If

there are existing to-do list notes, scroll to a to-do list note, and select View.

Select Menu > Tools > To-do list > Add note. Enter the subject, and select Save >

High, Medium, or Low.

To write additional notes, select Menu > Tools > To-do list > Options > Add.

Enter the subject, and select Save > High, Medium, or Low.

When you create a to-do list note, the following options are available:

Search—search for existing notes.

Insert smiley—Insert a smiley into your message.

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary. This displays only when predictive text is

on.

Tools

FCC DRAFT

Insert symbol—Insert a special character into your message. This displays only

when predictive text is on.

Writing language—Choose the language you want to use.

Prediction on or Prediction off—Turn predictive text on or off.

Matches—View matches found in the predictive text dictionary for the word you

want to use. This displays only when predictive text is on.

To edit the notes, select Menu > Tools > To-do list > View > Edit. Edit the subject,

select Save.

To view to-do list notes, select Menu > Tools > To-do list > View > Options, and

one of the following choices:

Deadline—Change the deadline of the to-do list note.

Mark note as done or Mark as not done—Indicate whether the to-do list note is

completed or not.

Delete—Delete the to-do list note.

Use detail—Use a detail contained in the note.

Edit priority—Change the priority to High, Medium, or Low.

Send > Send as message or Via calendar—Send the to-do list note.

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do list note to your calendar.

Send a to-do list note

1. Select Menu > Tools > To-do list.

2. Scroll to the note you wish to send, and select Options > Send > Send as

message or Via calendarto send the to-do list note in calendar format (vCal),

in a text message, in a multimedia message, or directly to another device.

To-do list options

Select Menu > Tools > To-do list > Options and one of the following:

Add—Create a new to-do list note.

Delete—Delete the to-do list note you selected.

Mark note as done or Mark as not done—Indicate whether the to-do list note is

completed or not.

Use detail—Use a detail contained in the note.

Tools

FCC DRAFT

Sort by deadline or Sort by priority—Sort the to-do list by either date or priority.

Send > Send as message or Via calendar—Send the to-do list note in calendar

format (vCal), in a text message, in a multimedia message, or directly to another

device.

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do list note you selected to your calendar.

Delete done notes—Delete the to-do list note you selected from your calendar.

Delete all notes—Delete all the to-do list notes.

The to-do list options appear only when you have created one or more notes.

■Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root, changes the sign of the number entered, and

converts currency values.

Note: This calculator has a limited accuracy and is designed for simple

calculations.

To use the calculator:

1. Select Menu > Tools > Calculator.

2. Enter the first number in the calculation.

Press # for a decimal point if necessary.

Press the scroll key up or down to change the sign of your number or value.

Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)

characters. Pause briefly to select the displayed character.

3. Enter the second number in your calculation.

4. Select Equals.

To perform a square or square root calculation, select Options > Square or Square

root.

■Currency converter

You can convert foreign currency to domestic, or vice versa, directly from the

standby mode or from the Calculator menu.

Tools

FCC DRAFT

Note: When you change base currency, you must enter the new rates

because all previously set exchange rates are set to zero.

1. Select Menu > Tools > Calculator > Options > Exchange rate > Foreign units

in home units or Home units in foreign units.

Foreign units in home units—The number of home units it takes to make one

unit of foreign currency.

Home units in foreign units—The number of foreign units it takes to make one

unit of your home currency.

2. Enter the exchange rate (press # to insert a decimal), and select OK.

3. Select Back to return to the Calculator screen, and enter the currency amount

to convert.

4. Select Options > To home or To foreign.

To home—Converts foreign currency to domestic currency.

To foreign—Converts domestic currency to foreign currency.

5. If you have not already entered an exchange rate, the device prompts you to

enter it. Select OK. You can edit the exchange rate at any time.

■Timers

Your device contains two event timers: a normal timer that counts down a set

interval, and an interval timer that counts up set intervals.

The timers only work when the phone is on. Once you turn off your phone, the

timers are no longer active.

Normal timer

This countdown timer enables you to enter a specific duration (up to 99 hours,

59 minutes, and 59 seconds). When the time runs out, your device sounds an

alarm.

To set the normal timer:

1. Select Menu > Tools > Timer > Normal timer.

2. Enter the time (in hh:mm:ss format), and select OK.

3. Enter a note for the timer, and select Start.

Tools

FCC DRAFT

and the timer (in hh:mm:ss format) appear in the standby mode when the

countdown timer is running.

When the time runs out, your phone sounds an alarm, vibrates, and flashes its

lights. If you are in standby mode, select Restart or Exit. If you are not in the

standby mode, press any key during the alarm to stop the timer.

After 60 seconds the timer alert expires automatically. Select Exit or press the

end key to clear the timer note.

To change the time:

1. Select Menu > Tools > Timer > Change time.

2. Enter the new time, and select OK.

3. Leave the note as it was, or enter a new note, and select Start.

To stop the timer before the alarm sounds, select Menu > Tools > Timer > Stop

timer.

Interval timer

The interval timer in your device allows you to store multiple interval timers. You

can define and store up to 10 timing periods for each interval timer. Once at least

one interval timer is set and stored, you can select the interval timer and one of

the stored intervals for that timer. When the selected interval expires, your phone

sounds an alarm, vibrates, and flashes its lights.

To set an interval timer:

1. Select Menu > Tools > Timer > Interval timer.

2. Select Add new timer. This option only appears if you have already created an

interval timer.

3. Enter a name for the timer, and select Save.

4. Enter a name for the first timer period, and select Save.

5. Enter the desired time interval, and select OK.

6. Select an existing stored period and Edit period, Add period, Delete period, or

Start timer.

To use an interval timer:

1. Select Menu > Tools > Timer > Interval timer, and one of the set interval

timers. Add new timer is the only choice if you have not yet set any interval

timers.

Tools

FCC DRAFT

2. Select Start timer, View timer, Edit timer, Add new timer, or Delete timer.

These options only appear if you have already created an interval timer.

■Stopwatch

Your phone has a stopwatch that can be used to track time. The stopwatch

displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss

format.

Using the stopwatch or allowing it to run in the background when using other

features increases the demand on battery power and reduces the battery life.

Measure split or lap time

Use the split time or lap time functions for activities where you need to pace

yourself.

1. Select Menu > Tools > Stopwatch > Split timing or Lap timing > Start.

Split timing—Use the split time function for such activities as a long distance

race when you need to pace yourself. Select Split to note the lapsed time. The

timer continues to run and the split time appears below the running time.

Each time you select Split, the new measured time appears at the beginning

of the list. The maximum number of splits is 20.

Lap timing—Use the lap time function when you want to track how long it

takes to complete each cycle or lap. Select Lap to note the lap time. The clock

stops, then immediately restarts from zero. The lap time appears below the

running time. Each time you select Lap, the new measured time appears at

the beginning of the list. The maximum number of laps is 20.

2. Select Stop to end timing and display total time.

Save a time

To save a time while the clock is running, select Stop > Save, enter a name for the

measurement, and select OK. If you do not enter a name, the total time is used as

the default title for the lap or split time.

Stopwatch options

Select Menu > Tools > Stopwatch and one of the following:

Tools

FCC DRAFT

Continue—Continues to measure time. Only appears if clock is running and you

are returning to stopwatch screen.

Show last time—View the last measured time.

Split timing—Use the split time function.

Lap timing—Use the lap time function.

View times—Browse saved times.

Delete times > One by one or Delete all—Delete saved times.

Operation note

If you press the end key and return to the standby mode, the clock continues to

run in the background, and appears at the top of the screen.

To return to the Stopwatch screen, do the following:

1. Select Menu > Tools > Stopwatch > Continue.

2. To stop the clock, select Stop.

Text entry

FCC DRAFT

9. Text entry

You can use two methods for entering text and numbers: standard mode and

predictive text mode. Select Clear to backspace the cursor and delete a character.

Select and hold Clear to backspace continuously and delete characters.

■Standard mode

Standard mode is the only way to enter text in the contacts list and to rename

caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second

letter, and so on. If you pause briefly, the last letter on the display is accepted,

and your device awaits the next entry.

• Press 0 to enter a space and accept a completed word.

• Press 1 to insert a period into your message.

• Press * to display a complete list of special characters.

• Press and hold # to open the Editor settings (Number mode, Dictionary on or

Dictionary off, Writing language).

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry

screen to bring up the Editor settings. Select Number mode, and the device

returns to the message entry screen and switches the Abc icon in the upper left

corner of the display to the 123 icon (or back).

Punctuation and special characters

While at any text entry screen, press * to display special characters. Press * again

to cycle through all available characters. Scroll to navigate through the list of

special characters. With a character highlighted, select Insert to insert the

character into your message.

■Predictive text mode

Much faster than the standard mode method, predictive text input enables you to

write messages quickly using your keypad and the built-in dictionary. In the

predictive text mode, your phone predicts the words as you enter them.

Text entry

FCC DRAFT

Activate or deactivate

1. At any text entry screen, select Options > Prediction on to activate or

Prediction off to deactivate.

2. If you are turning predictive text on, select the language of your choice.

Text entry

The illustration below simulates your display each time a key is pressed. For

example, to write with predictive text on and the English dictionary selected,

press each of the following keys once:

•Press 0 to enter a space, and begin writing the next word.

• If a displayed word is not correct, press * to see other matches. To return to

the previous word in the list of matches, select Prev.

• If ? appears after a word, select Spell to add the word to the dictionary.

•Press 1 to insert a period into your message.

•Press and hold * to display special characters. Press * again to cycle through

all available characters.

■Change case and mode

Press # to switch between uppercase, lowercase, and sentence case text. As you

press #, the following icons appear in the upper left of the display screen:.

Uppercase text: standard mode is on.

Lowercase text: standard mode is on.

Sentence case text: standard mode is on. This option is available

only at the beginning of a sentence.

Uppercase text: predictive text is on.

Lowercase text: predictive text is on.

Sentence case text: predictive text is on. This option is available

only at the beginning of a sentence.

Messaging

FCC DRAFT

10. Messaging

If you have subscribed to a message network service, you can send and receive

messages to compatible phones also subscribed to a message service. You can

also send and receive e-mail messages if supported by your network operator.

You can make distribution lists that contain phone numbers and names from

your contacts list.

Your device supports the sending of text messages beyond the character limit of

a single message. Longer messages are sent as a series of two or more messages.

Your service provider may charge accordingly. Characters that use accents or

other marks, and characters from some language options like Chinese, take up

more space limiting the number of characters that can be sent in a single

message.

When composing text messages, check the number of characters allowed in the

top right corner of the message. Using Unicode characters takes up more space.

With Unicode characters in your message, the indicator may not show the

message length correctly. Before sending the message, the phone tells you if the

message exceeds the maximum length allowed for one message.

Important: Exercise caution opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

Note: When sending messages, your device will display Message sent.

This is an indication that the message has been sent by your device to the

message center number programmed into your device. For messages that

fail, the network will create a new error message, explaining why the

message was not delivered. Contact your service provider for more

details about messaging services.

■Text messages

Write and send

1. Select Menu > Messaging > Text messages > Create message.

2. Write a message using the keypad.

Depending on the messaging service enabled, some or all of the following

options are available while writing your message:

Messaging

FCC DRAFT

Sending options > Mark or Unmark > Urgent, Read receipt, Callback no., or

Signature. Select Sending options for a single message. See "Sending

options," p. 70.

Clear all—Erase all the text, pictures, sounds, or animations from the message

editor.

Add-ins—Insert sounds, animations, or pictures in a text message.

Styles—Choose the font type, font size, and text alignment in a text message.

Insert contact—Insert a name from your contacts list into your message.

Insert number—Insert a phone number or find a phone number in the

contacts list.

Save—Select Drafts to save the message in the drafts folder or Templates to

save the message as one of your predefined templates in the templates folder.

Exit editor—Exit the message editor.

Use template—Insert a predefined template into your message.

Insert word or Edit word—Enter or edit the text of a new word that might not

appear in the predictive text dictionary (only available with predictive text on).

Insert symbol—Insert a special character into your message (only available

with predictive text on).

Writing language—Choose the language you want to use.

Predictive text—Turn the predictive text on or off.

Matches—View matches in the dictionary for the word you want to use (only

available with predictive text on and when the same set of key presses can

produce multiple words).

3. To send the message, select Send to > Recently used, Send to number, Send to

e-mail, Send to distrib. list (if a distribution list has been created), or Send to

many.

4. Enter the recipient’s phone number or e-mail address, or select Search to

retrieve a number or e-mail address from your contacts list; select OK.

Read message

When you receive a message, a notification message and are displayed.

1. Select Show to read the message or Exit to dismiss the notification and read

the message later from your inbox. See "View saved messages," p. 69.

2. Scroll up or down to view the whole message, if necessary.

Messaging

FCC DRAFT

Options

When reading a text message, select Options to access some or all of the

following options:

Delete—Discard the message.

Use detail—Use or save the number, e-mail address, or Web address.

Save—Save the message to Saved text msgs., Templates, or a folder you have created.

Forward—Forward the message to another phone number or e-mail address.

Lock or Unlock—Lock or unlock the message.

Rename—Edit the title of the message.

Reply to message

1. Select Menu > Messaging > Text messages > Inbox and your desired message,

or when you receive a message, select Show.

2. Select Reply > Empty screen, Original text, Template, or one of the predefined

answers; then compose your reply using the keypad.

3. After creating the reply, select Send. The sender’s phone number or e-mail is

used as the default.

Templates

Templates are short, prewritten messages you can recall and insert into new text

messages when you are short on time.

1. Select Menu > Messaging > Text messages > Create message > Options > Use

template.

2. Select your desired template.

3. Select Send to > Recently used , Send to number, Send to e-mail, Send to

many, or Send to distrib. list (if a distribution list is created).

4. Enter the recipient’s phone number or e-mail address, or select Search to

retrieve a number or e-mail address from your contacts list; select Send.

Text message folders

Save messages

You can save drafts of messages or received messages to an existing folder or to a

folder that you have created.

1. Open the received message or create a new message, and select Options.

Messaging

FCC DRAFT

2. To save a received message, select Save > Saved text msgs., Templates, or a

folder you have created.

To save the draft of a message you have created, select Save message >

Drafts or Templates.

View saved messages

1. Select Menu > Messaging > Text messages.

2. Select the folder containing the message you want to view:

Inbox—Automatically stores any incoming messages

Outbox—Stores messages that have not been sent

Sent items—Stores messages that have been sent

Drafts—Stores messages created as drafts

Saved text msgs.—Stores messages that you choose to archive, including

unread ones

Templates—Stores pictures and prewritten templates. Preloaded templates

can be edited and customized.

My folders—Allows you to organize your messages by creating custom folders

and saving some of your messages here. Select Options > Add folder, Rename

folder, or Delete folder to add a custom folder or rename or delete a folder you

have created.

You can only delete folders created in my folders; the inbox, sent items, archive,

and templates folders are protected. When deleting a folder, you are also

deleting all messages in the folder.

3. When the folder opens, select the message you want to view.

Delete messages

If your message memory is full and you have more messages waiting at the

network, No space for new text messages appears in the standby mode. You can

do the following:

• Read some of the unread messages, and delete them individually.

• Delete messages from some of your folders.

Messaging

FCC DRAFT

Delete a single message

1. Select Menu > Messaging > Text messages.

2. Select the folder containing the message you want to delete.

3. Highlight the message you want to delete.

4. Select Options > Delete.

5. Select Yes to delete the message or No to exit.

Delete all messages in a folder

1. Select Menu > Messaging > Text messages > Delete messages.

2. Select the messages you want to delete:

All—Deletes all messages in all of the folders

All read—Deletes any messages that have been read in all of the folders

All unread—Deletes any messages that have not been read in all of the folders

3. Select and mark the folders that have messages you want to delete:

Inbox—Deletes all messages from the inbox folder

Sent items—Deletes all messages from the sent items folder

Outbox—Deletes all messages from the outbox folder

Drafts—Deletes all messages from the drafts folder

Archive—Deletes all messages from the archive folder

User defined folders—Deletes all messages from the user defined folder

4. Select Done > Yes to empty the marked folder.

Sending options

To change sending options for all text messages, select Menu > Messaging > Text

messages > Message settings > Sending options and the setting you want to

change:

Priority > Normal or Urgent —Set the priority of a message.

Delivery note > On or Off—Send a note to yourself confirming delivery of the

message.

Send callback number—Send a callback number to the recipient. Select Off or

enter your desired phone number to send to the recipient as a callback number,

and select OK.

Messaging

FCC DRAFT

Signature—Select On to create a signature to send with text messages or Off to

turn this feature off.

To change sending options for one message, select Menu > Messaging > Text

messages > Create message > Options > Sending options, mark or unmark the

setting you want to change:

Urgent—Set the priority of the message as urgent.

Read receipt—Send a note to yourself confirming delivery of the message.

Callback no.—Enter your desired phone number to send to the recipient as a

callback number, and select OK.

Signature—Create a signature to send with the text message.

Other settings

Select Menu > Messaging > Text messages > Message settings > Other settings

and the setting you want to change:

Message font size > Small font, Normal font, or Large font

Message overwriting > Sent items only, Inbox only, S. items & Inbox, or Off

Note: When the message memory is full, your phone cannot send or

receive any new messages. To free up the memory, you can select

Message overwriting to make your phone automatically replace old

messages in the inbox and outbox folders when new ones arrive.

Save sent messages > Always save, Always prompt, or Off

Queue msgs. when digital unavailable > On, On prompt, or Off—Messages are

stored in the outbox until they can be sent with digital service.

■Voice messages

If you subscribe to voice mail, your network operator will give you a voice

mailbox number. You need to save this number to your device to use voice mail.

When you receive a voice message, your device beeps, displays a message, or both.

If you receive more than one voice message, your device shows the number of

voice messages received.

Save voice mailbox number

Your network operator may have already saved your voice mailbox number to

your device. Select OK to leave the number unchanged.

Messaging

FCC DRAFT

1. Select Menu > Messaging > Voice messages > Voice mailbox number. The

voice mailbox number is displayed.

2. If the box is empty, enter the voice mailbox area code and number, and

select OK.

Set up voice mail

1. After you save the voice mailbox number, in the standby mode, press and

hold 1.

2. When you connect to voice mail, and the prerecorded greeting begins, follow

the automated instructions to setup voice mail.

Listen to voice messages

After you set up voice mail, in the standby mode, press and hold 1; or select

Menu > Messaging > Voice messages > Listen to voice messages to dial the voice

mailbox number. When you connect and the prerecorded greeting begins, follow

the automated instructions to listen to your voice messages.

Automate voice mail

Voice mail services vary by network operator. The following instructions are

examples of common operations. Please check with your network operator for

specific instructions on using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step. Keep in

mind that each voice mail service may vary. However, it should look similar to

the following:

Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and

press #.

Phone numbers with dialing codes

You can insert special characters called dialing codes into phone numbers such

as voice mail, and save the number to a 1-touch dialing location.

Dialing codes instruct the receiving system to pause, wait, bypass, or accept

the numbers that follow them in the dialing string. To set up dialing codes, do

the following:

Messaging

FCC DRAFT

1. Select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot, and select Assign.

3. Enter your mailbox phone number, including the area code.

4. Enter any dialing codes as necessary after the entered phone number.

For example, if you pause for 5 seconds after connecting to voice mail, enter p

twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.

5. Enter any remaining pauses or other information that enables you to listen to

your messages, and select OK.

6. Enter a name (such as voice mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing

key in the standby mode.

Insert dialing codes

Press * repeatedly to cycle through dialing codes. When the desired code appears

in the display, pause briefly, and the code is inserted into the dialing string.

The following dialing codes are available:

*—Bypasses a set of instructions

p—Pauses for 2.5 seconds before sending any numbers that follow

+—Replaced by the international access code

w—Waits for you to press the send key before sending the numbers or codes

that follow

Clear voice mail icon

To clear the voice mail icon from the display, select Menu > Messaging > Voice

messages > Clear voice message icon.

Extras

FCC DRAFT

11. Ext ra s

Challenge yourself or a friend to one of the fun games in your device, including

Golf Tour and Solitaire. In Collections, use Converter II to convert currency,

weight, length, area, and volume. Use World clock II to check the time in cities

around the world.

Important: Only install and use applications and other software from

sources that offer adequate security and protection against harmful

software.

■Games

Select Menu > Extras > Games to display the games on your device.

To check free memory and available memory in the gallery, select Menu >

Extras > Games > Options > Memory status.

■Collection

An application may require a few seconds to load. When you open an application,

wait for the launch screen to disappear. At that point, the application is ready.

Leaving applications running in the background increases the demand on battery

power and reduces the battery life.

Select Menu > Extras > Collection and an application.

To check free memory and available memory in the gallery, select Menu >

Extras > Collection > Options > Memory status.

Enhancements

FCC DRAFT

12. Enhancements

Check the model number of any charger before use with this

device. This device is intended for use when supplied with

power from the AC-3U charger.

Warning: Use only batteries, chargers and enhancements

approved by Nokia for use with this particular model. The use of any

other types may invalidate any approval or warranty, and may be

dangerous. For availability of approved enhancements, please check

with your dealer.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and

are operating properly.

• Installation of any complex car enhancements must be made by qualified

personnel only.

Power:

• Standard 860 mAh Li-Ion Battery (BL-5B)

• Mobile Charger AC-3U

Go to www.nokia.com/phones for more information about enhancements.

Battery information

FCC DRAFT

13. Battery information

■Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times, but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal,

replace the battery. Use only Nokia approved batteries, and recharge your battery

only with Nokia approved chargers designated for this device.

If a replacement battery is being used for the first time or if the battery has not

been used for a prolonged period, it may be necessary to connect the charger

then disconnect and reconnect it to begin charging the battery.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave a fully charged battery connected to a charger, since overcharging may shorten

its lifetime. If left unused, a fully charged battery will lose its charge over time.

If the battery is completely discharged, it may take a few minutes before the

charging indicator appears on the display or before any calls can be made.

Use the battery only for its intended purpose. Never use any charger or battery

that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the

positive (+) and negative (-) terminals of the battery. (These look like metal strips

on the battery.) This might happen, for example, when you carry a spare battery

in your pocket or purse. Short-circuiting the terminals may damage the battery

or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot

or cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode

if damaged. Dispose of batteries according to local regulations. Please recycle

when possible. Do not dispose as household waste.

Battery information

FCC DRAFT

■Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting

an original Nokia battery, purchase it from an authorized Nokia dealer, look for

the Nokia Original Enhancements logo on the packaging, and inspect the hologram

label using the following steps:

Successful completion of the four steps is not a total assurance of the authenticity

of the battery. If you have any reason to believe that your battery is not an authentic

original Nokia battery, you should refrain from using it, and take it to the nearest

authorized Nokia service point or dealer for assistance. Your authorized Nokia

service point or dealer will inspect the battery for authenticity. If authenticity

cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1. W hen looking at the hologram on the label, you

should see the Nokia connecting hands symbol

from one angle and the Nokia Original

Enhancements logo when looking from

another angle.

2. When you angle the hologram left, right, down,

and up, you should see 1, 2, 3, and 4 dots on each

side respectively.

3. Scratch the side of the label to reveal a 20-digit

code, for example, 12345678919876543210.

Turn the battery so that the numbers are facing

upwards. The 20-digit code reads starting from

the number at the top row followed by the

bottom row.

4. Confirm that the 20-digit code is valid by following the instructions at

www.nokia.com/batterycheck.

Battery information

FCC DRAFT

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram on the label is

an authentic Nokia battery, please do not use the battery. Take it to the nearest

authorized Nokia service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements. It may also

invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries, visit www.nokia.com/battery.

Care and maintenance

FCC DRAFT

Care and maintenance

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage.

• Keep the device dry. Precipitation, humidity and all types of liquids or

moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, remove the battery and allow the device to dry

completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

• Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep, such as contacts and

calendar notes, before sending your device to a service facility.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

Additional safety information

FCC DRAFT

Additional safety information

■Operating environment

Your device and its enhancements may contain small parts. Keep them out of the

reach of small children.

Remember to follow any special regulations in force in any area and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. This device meets

RF exposure guidelines when used either in the normal use position against the

ear or when positioned at least 2.2 cenimeters (7/8 inches) away from the body.

When a carry case, belt clip, or holder is used for body-worn operation, it should

not contain metal and should position the device the above-stated distance from

your body.

To transmit data files or messages, this device requires a quality connection to

the network. In some cases, transmission of data files or messages may be

delayed until such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is completed.

■Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any questions. Switch

off your device in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 15.3

cenimeters (6 inches) be maintained between a wireless device or phone and a

pacemaker to avoid potential interference with the pacemaker. These

recommendations are consistent with the independent research by and

recommendations of Wireless Technology Research. To minimize the potential

for interference, persons with pacemakers should do the following:

• Always keep the device more than 15.3 cenimeters (6 inches) from their

pacemaker when the device is switched on

• Not carry the device in a breast pocket

Additional safety information

FCC DRAFT

• Hold the device to the ear opposite the pacemaker to minimize the potential

for interference.

If you have any reason to suspect that interference is taking place, switch off

your device immediately.

Hearing aids

Some digital wireless devices may interfere with some hearing aids. If

interference occurs, consult your service provider.

■Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, and air bag

systems. For more information, check with the manufacturer or its representative

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty

that may apply to the device. Check regularly that all wireless device equipment

in your vehicle is mounted and operating properly. Do not store or carry flammable

liquids, gases, or explosive materials in the same compartment as the device, its

parts, or enhancements. For vehicles equipped with an air bag, remember that an

air bags inflate with great force. Do not place objects, including installed or portable

wireless equipment in the area over the air bag or in the air bag deployment area.

If in-vehicle wireless equipment is improperly installed and the air bag inflates,

serious injury could result.

Using your device while flying in aircraft is prohibited. Switch off your device

before boarding an aircraft. The use of wireless teledevices in an aircraft may be

dangerous to the operation of the aircraft, disrupt the wireless telephone

network, and may be illegal.

■Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include

areas where you would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting in bodily injury or

even death. Switch off the device at refueling points such as near gas pumps at

service stations. Observe restrictions on the use of radio equipment in fuel depots,

storage, and distribution areas; chemical plants; or where blasting operations are

in progress. Areas with a potentially explosive atmosphere are often but not

Additional safety information

FCC DRAFT

always clearly marked. They include below deck on boats, chemical transfer or

storage facilities, vehicles using liquefied petroleum gas (such as propane or

butane), and areas where the air contains chemicals or particles such as grain,

dust, or metal powders.

Failure to observe these instructions may lead to suspension or denial of

telephone services to the offender, legal action, or both.

■Emergency calls

Important: Wireless phones, including this device, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call, make sure your device is properly charged before

attempting any emergency calls. If your battery becomes empty, you cannot

receive or make calls, including emergency calls and must wait a few minutes

after the charging begins to place your call.

1. If the device is not on, switch it on. Check for adequate signal strength. Some

networks may require that a valid UIM (CDMA SIM) card is properly inserted

in the device.

2. Press the end key as many times as needed to clear the display and ready the

device for calls.

3. Enter the official emergency number for your present location, and press the

send key. Emergency numbers vary by location.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. If the device is in an offline or flight mode you

must change the profile to activate the device function before you can make an

emergency call. Consult this guide or your service provider. When making an

emergency call, give all the necessary information as accurately as possible. Your

wireless device may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

■Certification information (SAR)

This mobile device meets guidelines for exposure to radio waves.

Your mobile device is a radio transmitter and receiver. It is designed not to

exceed the limits recommended by international guidelines. These guidelines

were developed by the independent scientific organization ICNIRP and include

Additional safety information

FCC DRAFT

safety margins designed to assure the protection of all persons, regardless of age

and health.

The exposure guidelines for mobile devices employ a unit of measurement known

as the Specific Absorption Rate or SAR. The SAR limit set by ICNIRP is 2.0 watts/

kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted

using standard operating positions with the device transmitting at its highest

certified power level in all tested frequency bands. The actual SAR level of an

operating device can be well below the maximum value because the device is

designed to use only the power required to reach the network. That amount

changes depending on a number of factors such as how close you are to a

network base station. The highest SAR value when tested according to

international testing procedures for use at the ear is 0.87 W/kg.

Use of device accessories and enhancements may result in different SAR values.

SAR values may vary depending on national reporting and testing requirements

and the network band. Additional SAR information may be provided under

product information at www.nokia.com.

Your mobile device is also designed to meet the requirements for exposure to

radio waves established by the Federal Communications Commission (USA) and

Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over

one gram of tissue. The highest SAR value reported under this standard during

product certification for use at the ear is 1.30 W/kg and when properly worn on

the body is 0.76 W/kg.

Information about this device can be found on the FCC's website at http://

www.fcc.gov/oet/fccid by searching the equipment authorization system using

FCC ID: QMNRM-155.

■Hearing aid compatibility (HAC)

Warning: For hearing aid compatibility, you must turn off the Bluetooth

radio.

Your mobile device model complies with FCC rules governing hearing aid

compatibility. These rules require an M3 microphone or higher value. The

M-value of this device, (M3), refers to lower radio frequency (RF) emissions. A

higher M-value generally indicates that a device model has a lower RF emissions

level, which may improve the likelihood that the device will operate with certain

hearing aids. Some hearing aids are more immune than others are to

interference. Please consult your hearing health professional to determine the

M-rating of your hearing aid and whether your hearing aid will work with this

device. More information on accessibility can be found at

www.nokiaaccessibility.com.

Additional safety information

FCC DRAFT

■Technical information

Dimensions: Width 43 mm, Length 81.35 mm, Depth 24 mm

Weight: < 105 g with BL-5B Li-Ion Battery

Volume: < 76 grams

Wireless networks: 1900/800 Mhz CDMA

Frequency range (Tx): PCS 1851.25–1908.75 MHz; Cellular 824.70–848.37 MHz

Frequency range (Rx): PCS 1931.25–1988.75 MHz; Cellular 869.70–893.37 MHz

Bluetooth: 2402.0 - 2480.0 MHz

GPS: 1575 MHz

■Battery information

This section provides information about battery charging times with the Travel

Charger (AC-3U), talk-times, and standby times. Be aware that the information in

this section is subject to change. For more information, contact your service

provider.

Charging times

The following charging times are approximate:

Compact Charger (AC-3U): up to 3 hours 45 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use,

network conditions, features used, battery age and condition (including charging

habits), temperatures to which the battery is exposed, and many other factors.

Talk time: up to 3.94 hours (digital)

Standby time: up to 13.04 days

Index

FCC DRAFT

Index

NUMERICS

1-touch dialing 32, 47

alarm clock

repeating 52

setting 52

antenna 15

automate voicemail 72

automatic redial 32

backlight time-out 29

batteries and chargers 76

battery

authentication 77

charging 16

charging times 84

information 76, 84

talk and standby times 84

billing 9

Bluetooth car kit 39

Bluetooth connectivity 37

set up 39

settings 38

Bluetooth headset 39

business cards 51

calendar 53

make notes 54

open 53

options 53

receive, send notes 55

settings 55

call

time 24

timers 24

call forwarding 44

call restrictions 42

call settings 31

call waiting 45

caller groups 47

calling cards 32

calls

answering 18

duration 24

in-call options 19

making 17

care and maintenance 79

certification information (SAR) 82

charger

connecting 16

information 76

times 84

collections 74

contacts list 46

add 46

delete 50

edit 49

send 51

countdown timer 60

currency converter 59

customer care 9

date setting 30

dialed numbers 23

dialing codes 73

display

settings 28, 29

emergency calls 82

with keypad locked 34

enhancement settings 40

charger 40

headset 40

hearing aid 41

TTY/TDD 40

enhancements 75

ESN 8

extras 74

Index

FCC DRAFT

FCC information 82

feature codes 44

folders 21

font color 28

gallery 21

games 74

go to functions 14

headset 17

help 8

help text 13, 35

indicators and icons 11

international prefix 33

Interval timer 61

keyguard 20

automatic 34

languages 34

lap time 62

location info sharing 31

lock code 42

loudspeaker 19

Media 26

MEID 8

memory 35

message folders 68

messages

delete 69

voice messages 71

messaging

text messages 66

missed calls 23

navigation key 34

network services 6, 44

Network settings 43

notes 56

options 57

send 57

phone

details 45

phone language 34

phone lock 41

change lock code 42

phone settings 34

predictive text 64

quick keys 11

received calls 23

recent calls 23

clearing 24

dialed numbers 23

missed calls 23

received calls 23

recording sound 26

registering phone 8

repeating alarm 52

safety 5

important safety information

screen saver 28

scrolling 12

security settings 41

send own caller ID 45

set

alarm 52

time 30

setting up phone 15

settings 27

shared memory 7

sleep mode 29

Index

FCC DRAFT

snooze time-out 53

split time 62

standard mode 64

standby

time 84

standby mode 11

settings 28

start-up tone 35

stopwatch 62

talk time 84

technical information 84

text entry 64

predictive text 64

standard 64

text messages 66

themes 29

time and date settings 30

timed profiles 27

timer

countdown 60

interval 61

timers 60

to-do list

options 58

send 58

tone settings 30

Tools 52

touch tones 35

turn phone off 17

turn phone on 17

view

saved messages 69

voice

recorder 26

voice dialing 36, 48

voice messages 71

voice privacy 43

voicemail 71

volume

adjusting 18

use loudspeaker 19

wallpaper 28

Index

FCC DRAFT

Microsoft RM-155 CDMA800/1900 Cell Phone with Bluetooth User Manual

Microsoft Mobile Oy CDMA800/1900 Cell Phone with Bluetooth

Manual

Navigation menu

Namespaces

Views

Navigation