Microsoft RM-165 GSM 900/1800/1900 Cellular Telephone w/ BT User Manual RM 165 FCC en1draft

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/ BT RM 165 FCC en1draft

Manual

DRAFTRM-165 User GuideFCC ID: QTKRM-165IC: 661AD-RM165
DRAFTDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION, declares that this RM-165 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration or country specific information at www.nokia.com.Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved.Nokia, Nokia Connecting People, Xpress-on, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation. Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java is a trademark of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal, and noncommercial activity, and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal, and commercial uses may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.0434
DRAFTThis device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.Export ControlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.Model number: Nokia 8800dHereinafter referred to as Nokia 8800 Sirocco Edition924XXXX/Issue 1
Contents4DRAFTContentsFor your safety  ........................ 6General information................. 9Your phone package.............................. 9Overview of functions........................... 9Access codes  .......................................  10Configuration settings service ........  11Download content .............................  12Nokia Care Premium Service ...........  12Nokia support on the Web ...............  141. Get started .........................  15Install SIM card and battery ...........  15Charge the battery..............................  16Switch the phone on and off  .........  17Open the keypad .................................  18Antenna ................................................  182. Your phone.........................  19Keys and parts  ....................................  19Standby mode .....................................  20Flight mode  .........................................  21Keypad lock (keyguard) ....................  223. Call functions.....................  23Make a call ...........................................  23Speed dialing  ......................................  23Enhanced voice dialing  ....................  23Answer or reject a call.......................  24Options during a call..........................  254. Write text...........................  26Settings..................................................  26Predictive text input ..........................  26Traditional text input ........................  275. Navigate the menus ..........  28Access a menu function....................  286. Messaging .........................  29Text messages (SMS) .........................  29SIM messages  .....................................  31Multimedia messages .......................  31Audio messages...................................  34Memory full..........................................  35Folders ...................................................  35E-mail application ..............................  35Instant messaging (IM)  ....................  38Voice messages  ..................................  44Info messages  .....................................  44Service commands .............................  44Delete messages..................................  44Message settings.................................  457. Contacts   ...........................  49Search for a contact ..........................  49Save names and phone numbers....  49Save numbers, items, or an image .  49Move or copy contacts......................  50Edit contact details ............................  50Synchronize all ....................................  50Delete contacts or details.................  50Business cards  ....................................  51Settings..................................................  51Groups ...................................................  52Speed dialing  ......................................  52Info, service, and my numbers  .......  528. Call log  ..............................  53Positioning information  ...................  539. Settings .............................  54Profiles ..................................................  54Themes ..................................................  54Tones.......................................................  54Display....................................................  55Time and date ......................................  56My shortcuts ........................................  56Connectivity .........................................  58
Contents5DRAFTCall........................................................... 62Phone ..................................................... 63Enhancement ....................................... 64Configuration ...................................... 64Security ................................................. 65Restore factory settings  ................... 6610. Operator menu ................  6711. Gallery   ...........................  6712. Media ..............................  68Camera .................................................. 68Media player ........................................ 69Music player  ........................................ 70Radio ...................................................... 71Recorder ................................................ 72Equalizer ............................................... 7313. Organizer  ........................ 74Alarm clock  .......................................... 74Calendar ................................................ 74To-do list ............................................... 76Notes ...................................................... 76Calculator ............................................. 76Countdown timer ............................... 77Stopwatch ............................................ 7714. Applications ....................  79Games .................................................... 79Collection............................................... 7915. Web................................... 81Access and use services..................... 81Set up browsing ................................... 81Connect to a service........................... 81Browse pages........................................ 82Bookmarks ............................................. 83Appearance settings ........................... 84Security settings .................................. 85Service inbox ........................................ 85Cache memory...................................... 86Browser security .................................. 8616. SIM services ..................... 8917.P C connectivity................ 90PC Suite ................................................. 90Packet data, HSCSD, and CSD.......... 90Data communication applications . 9018.Battery information.......... 91Charging and discharging ................. 91Nokia battery authentication .......... 9219.Technical Information ...... 94Care and maintenance ........... 95Additional safety information 96APPENDIX ............................  100A meesage from the CTIA.................100A message from the FDA..................102
For your safety6DRAFTFor your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless phones may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the phone at a refuelling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the phone where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.
For your safety7DRAFTWATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACK-UP COPIESRemember to make back-up copies or keep a written record of all important information stored in your phone.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless device described in this guide is approved for use on the EGSM 900, and GSM 1800 and 1900 networks. Contact your service provider for more information about networks.Your product represents superior design and craftsmanship, and comes with stainless steel covers and a glass display treated for scratch resistance. Therefore, handle your phone with due care.When using the features in this device, obey all laws and respect the privacy and legitimate rights of others, including copyright.When you take and use images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.■Network services To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks
For your safety8DRAFTmay have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as text messages, multimedia messages, instant messages, e-mail, mobile Internet services, content and application downloads, and synchronization with remote Internet server, require network support for these technologies.■Shared memoryThe following features in this device may share memory: contacts, text and instant messages, e-mail, voice tags, calendar, to-do notes, JavaTM games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as Java applications, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.Note that gallery files share a different memory. For further information see “Gallery,” p. 67.■EnhancementsA few practical rules about accessories and enhancements:• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.
General information9DRAFTGeneral informationModel number: Nokia 8800dHereinafter referred to as Nokia 8800 Sirocco Edition■Your phone packageIn your package you will find the following items:• Your Nokia 8800 Sirocco Edition phone•Two Nokia Batteries BP-6X• Nokia Compact Charger AC-3• Nokia Desk Stand DT-16• Nokia  Headset HS-15• Nokia Bluetooth Headset HS-64W• Nokia Carrying Pouch CP-104• Suede cleaning cloth• User guide• Story booklet•CD-ROMThe items supplied with your phone and available enhancements may be different, depending on your region or service provider. If your package does not include all the listed items above, please contact your retailer.Before you can use your phone, you need to insert the SIM card, and insert and charge the battery. See “Install SIM card and battery,” p. 15.To avoid scratches, your device has to be carried in its carrying pouch. Do not use the cleaning cloth for other objects than your phone.■Overview of functionsYour phone provides many functions that are practical for daily use, such as a calendar, a clock, an alarm clock, a radio, a music player, and a built-in camera. Your phone also supports the following functions:
General information10DRAFT• Enhanced data rates for GSM evolution (EDGE), see “Packet data,” p. 59.• Extensible hypertext mark-up language (XHTML), see “Web,” p. 81.• E-mail application, see “E-mail application,” p. 35.• Java 2 Platform, Micro Edition (J2METM), see “Applications,” p. 79.• Bluetooth wireless technology, see “Bluetooth wireless technology,” p. 58.• Synchronization of data from another phone without having a SIM card inserted, see “Data transfer with a device,” p. 61.• Plug and play online service to get the configuration settings, see “Switch the phone on and off,” p. 17, and “Configuration,” p. 64.■Access codes Security code The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 65.PIN codes The PIN (personal identification number) code and the UPIN (universal personal identification number) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 65.The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.The module PIN is required to access the information in the security module. See “Security module,” p. 86.The signing PIN is required for the digital signature. See “Digital signature,” p. 88.
General information11DRAFTPUK codes The PUK (personal unblocking key) code and the UPUK (universal personal unblocking key) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code.Barring password The barring password (4 digits) is required when using the call barring service. See “Security,” p. 65.■Configuration settings serviceTo use some of the network services, such as mobile Internet services, MMS, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia website, www.nokia.com/support.When you have received a configuration message, Configuration settings received is displayed.To save the settings, select Show > Save. If the phone requests Enter settings' PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code, contact the service provider that supplies the settings. If no settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone asks Activate saved configuration settings?.To discard the received settings, select Exit, or Show > Discard.To edit the settings, see “Configuration,” p. 64.
General information12DRAFT■Download content You may be able to download new content (for example themes, tones, and video clips) to the phone (network service). Select the download function (for example, in Gallery). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider.Important: Use only services that you trust and that offer adequate security and protection against harmful software.■Nokia Care Premium ServiceAs a Nokia 8800 Sirocco Edition phone owner, you are entitled to Nokia Care Premium Service for 24 months from the date of the purchase. This includes (in selected countries*):• 24-month warranty** for your Nokia 8800 Sirocco Edition phone• Priority repair service** at selected Nokia Care points. Check www.nokia.com/support or your local Nokia Web site for the selected Nokia Care points that offer priority repair service or call to Nokia Care (for the phone numbers check the following list). Naturally you may also visit any other Nokia Care point in your area for standard repair service.• Unparalleled Nokia Care Contact Center support at the local call rate. For your local Nokia Care Contact Center phone number and the operational hours, check the following list.Country Local phonenumber forNokia CarePremiumServiceOperatinghours (local time)Country Local phonenumber forNokia Care Premium ServiceOperatinghours (local time) Austria 0810 281 900 Mon-Sat 9-21Luxembourg 034 208 08 193 Mon-Fri 9-21Belgium 070 70 77 70 Mon-Fri 9-21Malta 0574 519334 Mon-Fri 9-21Czech 841 11 44 55 Mon-Fri 9-18Netherlands 0900 202 60 55 Mon-Fri 9-21
General information13DRAFT*Services may vary for each country. Check www.nokia.com/support or your local Nokia Web site for details.**Based on Nokia end user warranty terms. In Europe, the 24-month warranty is applicable in the following countries: European Union member states, Azerbaijan, Belarus, Bosnia and  Herzegovina, Bulgaria, Croatia, Georgia, Iceland, Israel, Kazakhstan, Former Yugoslav Republic of Macedonia, Moldova, Mongolia, Norway, Romania, Russia, Serbia and Montenegro, Switzerland, Turkey, Ukraine.Cyprus 210 6142844 Mon-Fri 8-17Norway 22 97 1717 Mon-Fri 9-21Denmark 35 444 222 Mon-Fri 9-21Poland 022 654 00 43 Mon-Fri 9-18Estonia 611 9901 Mon-Fri 9-17Portugal 808 780 780 Mon-Fri 9-18Finland 0303 8286 Mon-Fri 9-21Romania 021 407 75 05 Mon-Fri 9-18France 08 11 00 45 67 Mon-Fri 9-21Russia +7(495) 7272222Mon-Fri 8-20Germany 0180 501 502 0 Mon-Fri 9-21Slovakia (02) 850 111561Mon-Fri 9-18Greece 210 6142 844 Mon-Fri 8-17Spain 902 404 414 Mon-Fri 9-21, Sat 9-16Hungary 06 40 505 505 Mon-Fri 9-18Sweden 077 66 22 222 Mon-Fri 9-21Ireland 1890 946 245 Mon-Fri 9-21Switzerland 0848 100010 Mon-Sat 9-21Italy 848 690 691 Mon-Fri 9-21Turkey 0 212 337 17 17 Mon-Sun 9-18Latvia 7320603 Mon-Fri 9-17UK 0870 600 6012 Mon-Fri 9-21Lithuania 8 700 55559 Mon-Fri 9-17Ukraine 8 800 50 101 50 Mon-Sun 9-20Country Local phonenumber forNokia CarePremiumServiceOperatinghours (local time)Country Local phonenumber forNokia Care Premium ServiceOperatinghours (local time)
General information14DRAFT■Nokia support on the WebCheck www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.
Get started15DRAFT1. Get started■Install SIM card and battery Always switch the device off and disconnect the charger before removing the battery.Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.This device is intended for use with BP-6X battery.The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.To remove the back cover of the phone, push the sideways release buttons (1), and slide the back cover to remove it from the phone (2).Remove the battery as shown (3).Insert the SIM card (4). Make sure that the SIM card is properly inserted and that the contact area on the card is facing downwards.211
Get started16DRAFTReplace the battery (5). Observe the battery contacts. Always use original Nokia batteries. See “Nokia battery authentication,” p. 92.Slide the back cover into its place (6).■Charge the batteryWarning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-3 charger.For availability of approved enhancements, please check with your dealer.Connect the lead from the charger to the socket at the bottom of your phone.Connect the charger to a wall socket.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.The charging time depends on the charger and the battery used. For example, charging a BP-6X battery with the AC-3 charger takes approximately 3 hours while the phone is in the standby mode.Desk stand DT-16The desk stand allows you to charge the phone battery and the spare battery at the same time. The desk stand can be supplied with power
Get started17DRAFTfrom the AC-3 or AC-4 charger. The charge level of the phone battery is indicated on the phone display.The white indicator light around the bottom of the desk stand shows the charging status of the inserted spare battery:• The light pulsates slowly when the desk stand is empty, when only the phone is inserted (the phone battery is fully charged or being charged), or when both the phone and the spare battery are inserted, and the spare battery is fully charged.• The light is continuously on when the spare battery is being charged. The spare battery will be charged if the phone is not inserted, or if the phone battery is fully charged.• To turn the light on or off, press and hold the button on the back of the desk stand.• If the light is not shown even though you have not turned it off by pressing the button, the charger connected to the desk stand may not be compatible or the spare battery temperature may be too high. Check the compatibility of the charger, and use only compatible Nokia chargers. If the spare battery temperature is too high, it will not be charged. When the temperature of the spare battery returns to normal, charging starts, and the light turns on again.■Switch the phone on and off Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Press and hold the power key as shown.If the phone asks for a PIN or a UPIN code, enter the code (for example, displayed as ****), and select OK.When you switch on your phone for the first time, and the phone is in the standby mode, p. 20, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See Connect to service provider support, p. 65, and “Configuration settings service,” p. 11.
Get started18DRAFTSet the time, zone, and dateEnter the local time, select the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT), and enter the date. See “Time and date,” p. 56.■Open the keypadTo open the keypad, slide the phone as shown.■Antenna Your device has an internal antenna.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.
Your phone19DRAFT2. Your phone■Keys and parts •Power key (1)• Camera lens (2)• Loudspeaker (3)• Battery cover release buttons (4)• Earpiece (5)• Left selection key (6)• Right selection key (7)• Call key (8) • End key (9) • Scroll key (10)• Middle selection key (11)• Keypad (12)• Microphone (13)• Charger connector (14)• Enhancements connector (15)• Headset HS-15, rotating clip
Your phone20DRAFT■Standby mode When the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.• Name of the network or the operator logo (1)• Signal strength of the local cellular network (2)• Battery charge level (3)• Function of the left selection key is Go to (4) or a shortcut to another function. See “Left selection key,” p. 56.• Function of the middle selection key is Menu (5)• Function of the right selection key is Names (6) to access the Names menu or another shortcut to a function that you selected. See “Right selection key,” p. 57. Operator variants may have an operator-specific name to access an operator specific Web site.Shortcuts • To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want and to call the number, press the call key.• To open the web browser, press and hold 0.• To call your voice mailbox, press and hold 1.• Use the scroll key as a shortcut. See “Navigation key,” p. 57.• To change from any profile to the silent profile and back to the general profile, press and hold #.• To change the profile, open the list of profiles: briefly press the power key, and select the desired profile from the list.Power saving features Your phone has features that save battery power in standby mode if the phone is not active. These features may be activated or not. See “Power saver,” p. 55 and “Sleep mode,” p. 56.
Your phone21DRAFTIndicatorsYou have unread messages.The phone registered a missed call. See “Call log,” p. 53.The keypad is locked. See “Keypad lock (keyguard),” p. 22.The phone does not ring for an incoming call or text message when Incoming call alert is set to Off and Message alert tone is set to Off. See “Tones,” p. 54.The alarm clock is set to On. See “Alarm clock,” p. 74.,  When the packet data connection mode Always online is selected and the packet data service is available, the indicator is shown. Refer to “Packet data,” p. 59.,  A GPRS or EGPRS connection is established.,  The GPRS or EGPRS connection is suspended (on hold).Bluetooth connection indicator. See “Bluetooth wireless technology,” p. 58. ■Flight mode You can deactivate all radio frequency functionality and still have access to offline games, calendar, and phone numbers. Use the flight mode in radio sensitive environments—on board aircraft or in hospitals. When the flight mode is active,  is shown.Select Menu > Settings > Profiles > Flight > Activate or Personalise.To deactivate the flight mode, select any other profile.In the flight mode you can make an emergency call. Enter the emergency number, press the call key, and select Yes when asked You must select another profile to be able to make a call. Exit flight profile? The phone attempts to make an emergency call.When the emergency call ends, the phone automatically changes to the general profile mode.
Your phone22DRAFT■Keypad lock (keyguard) You can lock the keypad to prevent accidental keypresses.• To lock the keypad and the power key, close the slide, and press Lock; or select Menu and press * within 3.5 seconds.• To unlock the keypad, open the slide; or select Unlock > OK within 1.5 seconds. If the Security keyguard is set On, enter the security code when requested.To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad is automatically locked.For Automatic keyguard and Security keyguard, see “Phone,” p. 63.When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions23DRAFT3. Call functions■Make a call1. Enter the phone number, including the area code. To delete an incorrect character, select Clear.For international calls, press * twice for the international prefix (the + character replaces the international access code). Then enter the country code, the area code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.3. To end the call or to cancel the call attempt, press the end key, or close the slide.Make a call using namesTo search for a name or phone number that you have saved in Contacts, see “Search for a contact,” p. 49. Press the call key to call the number.Last number redialingTo access the list of up to 20 numbers you last called or attempted to call, press the call key once in the standby mode. To call the number, select the number or name, and press the call key.■Speed dialing Assign a phone number to one of the speed-dialing keys, 2 to 9. See “Speed dialing,” p. 52. Call the number in either of the following ways:• Press a speed-dialing key, then the call key.•If Speed dialling is set to On, press and hold a speed-dialing key until the call is started. See Speed dialling in “Call,” p. 62.■Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. A voice command is added automatically to all entries in the contact list of the phone.
Call functions24DRAFTVoice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 63.If an application is sending or receiving data using a packet data connection in GSM, end the application before you use voice dialing.1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed.If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number. If the result was not the correct one, select manually another entry from the list.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Using voice commands to carry out a selected phone function is similar to voice dialing. See “Voice commands,” p. 57.■Answer or reject a callTo answer an incoming call, press the call key, or open the slide. To end the call, press the end key, or close the slide.To reject an incoming call when the slide is open, press the end key.To mute the ringing tone, select Silence. Then answer or reject the call.Tip: If the Divert if busy function is activated to divert the calls (for example, to your voice mailbox), rejecting an incoming call also divert the call. See “Call,” p. 62.If a compatible headset supplied with the headset key is connected to the phone, press the headset key to answer and end a call.
Call functions25DRAFTCall waiting To answer a waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key.To activate the Call waiting function, see “Call,” p. 62.■Options during a callMany of the options that you can use during a call are network services. For availability, contact your network operator or service provider.To increase or decrease the volume during a call, press the scroll key right or left.Select Options and from the following:Mute or Unmute, Contacts, Menu, Record, Lock keypad, Loudspeaker or Handset, and the network services Hold or Unhold, Answer and Reject, New call, Send DTMF (to send tone strings), Swap (to switch between the active call and the call on hold), Transfer (to connect a call on hold to an active call and disconnect yourself), Conference (to make a conference with up to five persons), Add to conference, Private call (to have a private conversation), End call, End all calls.Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
Write text26DRAFT4. Write textTo enter text (for example, when writing a message), use traditional or predictive text input. When using traditional text input, press a number key, 1 to 9, repeatedly until the desired character appears. Using predictive text input you can enter a letter with a single keypress.When you write text,   appears at the top left of the display, indicating predictive text input, and   appears, indicating traditional text input.  ,  , or   appears next to the text input indicator, indicating the character case. To change the character case, press #.  indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode.■SettingsTo set the writing language to a language other than that selected in Phone language, select Options > Writing language. Predictive text input is only available for the languages on the list.To set the predictive text input option, select Options > Prediction on, to set traditional text input option select Options > Prediction off.■Predictive text inputPredictive text input allows you to write text quickly using the phone keypad and a built-in dictionary.1. Start writing a word using the keys, 2 to 9. Press each key only once for a single letter. The word changes after each keystroke.2. When you finish writing the correct word, add a space to confirm it by pressing 0.If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, select Use.If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Enter the word (traditional text input is used), and select Save.
Write text27DRAFTWriting compound wordsEnter the first part of the word. Confirm it by pressing the scroll key right. Write the last part of the word and confirm the word.■Traditional text input Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available depend on the selected writing language. See “Settings,” p. 26.If the next letter you want is located on the same key as the present one, wait until the cursor appears, or press any of the scroll keys, and enter the letter.The most common punctuation marks and special characters are available under the number key 1.
Navigate the menus28DRAFT5. Navigate the menusThe phone offers you an extensive range of functions grouped into menus.■Access a menu function1. To access the menu, select Menu.To change the menu view, select Options > Main menu view > List or Grid.To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes.2. Scroll through the menu, and select, for example, Settings.3. If the menu contains submenus, select the one that you want, for example, Call.4. If the selected menu contains further submenus, select the one that you want, for example, Anykey answer.5. Select the setting of your choice.6. To return to the previous menu level, select Back. To exit the menu, select Exit.The menus, submenus, and setting options are numbered. To access them, shortcut numbers can be used.To access the menu, select Menu. Enter quickly, within 2 seconds, the shortcut number of the menu function you want to access. To access the menu functions in menu level 1, enter 0 and 1.
Messaging29DRAFT6. Messaging The message services can only be used if they are supported by your network or your service provider.Note: When sending messages, your device may display the words Sending message. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.Only devices that have compatible features can receive and display messages. The appearance of a message may vary depending on the receiving device.■Text messages (SMS)Using the short message service (SMS) you can send and receive multipart messages (network service) that can contain pictures.Before you can send any text, picture, or e-mail message, you must save your message centre number. See “Message settings,” p. 45.To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see “Save numbers, items, or an image,” p. 49.Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space, limiting the number of characters that can be sent in a single message.An indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of two messages.
Messaging30DRAFTWrite and send a message1. Select Menu > Messaging > Create message > Text message.2. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. Scroll right to add new contacts manually in the To: field. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used. To retrieve the contacts from the Call log, select Add > Open Log.To send a text message to an e-mail address, enter the e-mail address in the To: field.3. Scroll down, and write your message in the Message: field. See “Write text,” p. 26.To insert a template into the message, select Options > Use template. 4. To send the message, select Send; or press the call key. See “Send a message,” p. 32.Read and reply to a message1 message received, or the number of new messages with messages received is shown when you receive a message.1. To view a new message, select Show. To view it later, select Exit. is shown if you have unread messages in Inbox. To access an unread message in the inbox, select Menu > Messaging > Inbox. If more than one message is received, select the message that you want to read.2. To view the list of available options while reading a message, select Options.3. To reply to a message, select Reply > Text message, Multimedia, or Audio message.Scroll down, and write your message in the Message: field. See “Write text,” p. 26.
Messaging31DRAFTIf you want to change the message type for your reply message, select Options > Change msg. type.4. To send the message, select Send; or press the call key.■SIM messages SIM messages are specific text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa.To read SIM messages, select Menu > Messaging > Options > SIM messages.■Multimedia messages Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.To check availability and to subscribe to the multimedia messaging network service, contact your service provider. See “Multimedia message,” p. 46.A multimedia message can contain text, sound, images, video clips, a business card, and a calendar note. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.You cannot receive multimedia messages during a call or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications.Write and send a message The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.1. Select Menu > Messaging > Create message > Multimedia.2. Enter your message.
Messaging32DRAFTYour phone supports multimedia messages that contain several pages (slides). A message can contain several slides. A slide can contain text, one image, one sound clip, one calendar note and one business card; or text and a video clip. A message can contain only one calendar note and one business card. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select Insert >Slide; or select Options > Insert > Slide.To insert a file in the message, select Insert or Options > Insert.You can obtain images and video clips from the Gallery, or to take them directly from the viewfinder, select Options > Insert > Image > New Image or Options > Insert > Video clip >New video clip.3. To view the message before sending it, select Options > Preview.4. To send the message, select Options > Send; or press the call key. See “Send a message,” p. 32.5. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used. To retrieve the contacts from the call log, select Add > Open Log.To send a multimedia message to an e-mail address, enter the e-mail address in the To: field.Send a messageCopyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred, or forwarded.When you finish writing your message, select Send, or press the call key, to send the message. The phone saves the message in the Outbox folder, and sending starts. If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See “General,” p. 45.
Messaging33DRAFTNote: When the phone sends the message, the animated   is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.It takes more time to send a multimedia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later.Cancel message sendingWhen the phone saves a message in the Outbox folder, Sending message or Sending messages is displayed. To cancel the text message sending, select Cancel.To cancel the sending of the multimedia messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.Play and reply to a messageImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.Multimedia message received or the number of new messages with messages received is displayed when you receive a new multimedia message.1. To read the message, select Show. To view it later, select Exit. is shown if you have unread messages in Inbox. To access unread messages in the inbox, select Menu > Messaging > Inbox. Scroll to the message that you want to view, and select it.2. To view the whole message if the received message contains a presentation, select Play.To view the files in the presentation or the attachments, select Options > Objects or Attachments.
Messaging34DRAFT3. To reply to the message, select Options > Reply > Text message, Multimedia, or Audio message. Write the reply message.If you want to change the message type for your reply message, select Options > Change msg. type. The new message type may not support all the content that you have added.4. To send the message, select Send; or press the call key. See “Send a message,” p. 32.■Audio messagesWith this menu, use the multimedia message service to create and send a voice message in a convenient way. Multimedia messaging service must be activated before you can use audio messages.Create and send a message1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see “Recorder,” p. 72.2. To view the available options, select Options.3. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used. To retrieve the contacts from the call log, select Add > Open Log.To send a multimedia message to an e-mail address, enter the e-mail address in the To: field.4. To send the message, select Send.Listen and reply to a messageWhen your phone receives an audio message, 1 audio message received is displayed. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit.
Messaging35DRAFT is shown if you have unread audio messages in Inbox. To access unread messages in the inbox, select Menu > Messaging > Inbox.■Memory fullWhen you are receiving a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked.To free phone memory, delete photos, ringing tones, or other data in the phone memory.■Folders The phone saves received messages in the Inbox folder.Messages that have not yet been sent are saved in the Outbox folder.To set the phone to save the sent messages in the Sent items folder, see Save sent messages in “General,” p. 45.To edit and send messages that you have written and saved in the Drafts folder, select Menu > Messaging > Drafts.You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items > Saved messages or a folder that you add. To add a new folder for your messages, select Options > Add folder. To delete or rename a folder, scroll to the desired folder, and select Options > Delete folder or Rename folder.Your phone has templates. To create a new template, save or copy a message as a template. To access the template list, select Menu > Messaging > Saved items > Templates.■E-mail applicationThe e-mail application uses a packet data connection (network service) to allow you to access your e-mail account. This e-mail application is
Messaging36DRAFTdifferent from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system.You can write, send, and read e-mail with your phone. You can also save and delete the e-mail on a compatible PC. Your phone supports POP3 and IMAP4 e-mail servers.Before you can send and retrieve any e-mail messages, you must do the following: • Obtain a new e-mail account or use your current account. To check the availability of your e-mail account, contact your e-mail service provider.• Check your e-mail settings with your network operator or e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See “Configuration settings service,” p. 11. You can also enter the settings manually. See “Configuration,” p. 64.To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See “E-mail,” p. 47.This application does not support keypad tones.Setting WizardThe setting wizard will start automatically if no e-mail settings are defined in the phone. To enter the settings manually, select Menu > Messaging > E-mail > Options > Manage accounts > Options > New. The Manage accounts options allow you to add, delete, and change the e-mail settings. Make sure that you have defined the correct preferred access point for your operator. See “Configuration,” p. 64. The e-mail application requires an Internet access point without a proxy. WAP access points normally include a proxy and do not work with the e-mail application.Write and send an e-mailYou can write your e-mail message before connecting to the e-mail service; or connect to the service first, then write and send your e-mail.
Messaging37DRAFT1. Select Menu > Messaging > E-mail > Write new e-mail.2. If more than one e-mail account is defined, select the account from which you want to send the e-mail.3. Enter the recipient’s e-mail address.4. Write a subject for the e-mail.5. Write the e-mail message. See “Write text,” p. 26.To attach a file to the e-mail, select Options > Attach file and a file from Gallery.6. To send the e-mail message immediately, select Send > Send now. To save the e-mail in the Outbox folder to be sent later, select Send > Send later.To edit or continue writing your e-mail later, select Options > Save as draft. The e-mail is saved in Outboxes > Drafts.To send the e-mail later, select Menu > Messaging > E-mail > Options > Send now or Send & check e-mail.Download e-mail1. To download e-mail messages that have been sent to your e-mail account, select Menu > Messaging > E-mail > Check new e-mail.If more than one e-mail account is defined, select the account from which you want to download the e-mail.The e-mail application only downloads e-mail headers at first. 2. Select Back.3. Select Inboxes, the account name, and the new message, and select Retrieve to download the complete e-mail message.To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Send & check e-mailRead and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.
Messaging38DRAFT1. Select Menu > Messaging > E-mail > Inboxes, the account name, and the desired message.2. While reading the message, select Options to view the available options. 3. To reply to an e-mail, select Reply > Original text or Empty message. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject, then write your reply.4. To send the message, select Send > Send now.E-mail foldersYour phone saves e-mail that you have downloaded from your e-mail account in the Inboxes folder. The Inboxes folder contains the following folders: “Account name” for incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for sorting e-mail, Junk in which all spam e-mail is stored, Drafts for saving unfinished e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent.To manage the folders and their e-mail content, select Options to view the available options of each folder.Spam filterThe e-mail application allows you to activate a built-in spam filter. To activate and define this filter, select Options >Spam filter >Settings in the main e-mail idle screen. The spam filter allows the user to put specific senders on a black or white list. Black list sender messages are filtered to the Junk folder. Unknown and White list sender messages are downloaded into the account inbox. To blacklist a sender, select the e-mail message in the Inboxes folder and Options > Blacklist sender.■Instant messaging (IM) You can take text messaging to the next level by experiencing instant messaging (network service) in a wireless environment. You can engage in IM with friends and family, regardless of the mobile system or
Messaging39DRAFTplatform (like the Internet) they are using, as long as you all use the same IM service.Before you can start using IM, you must first subscribe to your wireless service provider’s text messaging service and register with the IM service you want to use. You must also obtain a user name and password before you can use IM. See “Register with an IM service,” p. 39 for more information.Depending on both your IM service provider and your wireless service provider, you may not have access to all of the features described in this guide.You may receive the configuration settings for IM service as a configuration message. See “Configuration settings service,” p. 11. You can also enter the settings manually. See “Configuration,” p. 64. The icons and texts on the display may vary, depending on the IM service.While you are connected to the IM service, you can use the other functions of the phone, and the IM conversation remains active in the background. Depending on the network, the active IM conversation may consume the phone battery faster, and you may need to connect the phone to a charger.Register with an IM serviceYou can register to an IM service over the Internet. During the registration process, you will have the opportunity to create the user name and password of your choice. For more information about signing up for IM services, contact your wireless service provider.AccessTo access the Instant messages menu while still offline, select Menu > Messaging > Instant messages (Instant messages may be replaced by another term depending on the service provider). If more than one set of connection settings for IM service is available, select the one you want. If there is only one set defined, it is selected automatically.The following options are available:
Messaging40DRAFTLogin — to connect to the IM service. To set the phone to automatically connect to the IM service when you switch on the phone; in the login session, scroll to Automatic login: and select Change >On, or select Menu > Messaging > Instant messages, connect to the IM service, and select Options > Settings > Automatic login > On phone start-up. Saved conversations — to view, erase, or rename the conversations that you saved during an IM sessionConnect. settings — only the configurations that support IM service are shown. Select a service provider, Default or Personal config.To activate the settings for the IM service, select from the following options:Configuration — select the set that you would like to activate.Account — select an account provided by the service provider.User ID — enter the ID that you want to use to connect to IM service.Password — enter the password that you want to use to connect to IM service.ConnectTo connect to the IM service, access the Instant messages menu, select the IM service, if needed, and select Login. When the phone has successfully connected, Logged in is displayed.To disconnect from the IM service, select Options >Logout.SessionsWhen connected to the IM service your status as seen by others is shown in a status line: My status: Online, My status: Busy or Status: App. offl. — to change own status, select Change.Below the status line there are three folders containing your contacts and showing their status: Convers., Online and Offline. To expand the folder highlight it and select Expand (or press scroll right), to collapse the folder select Collapse (or press scroll left).Conversations — shows the list of new and read instant messages or invitations to IM during the active IM session.
Messaging41DRAFT indicates a new group message. indicates a read group message. indicates a new instant message. indicates a read instant message. indicates an invitation.The icons and texts on the display may vary, depending on the IM service you have selected.Online — shows the number of contacts that are online. Offline — shows the number of contacts that are offline.To start a conversation, expand the Online or the Offline folder and scroll to the contact with whom you would like to chat and select Chat. To answer an invitation or to reply to a message, expand the Conversations folder, and scroll to the contact to whom you would like to chat, and select Open. To add contacts, see “Add IM contacts,” p. 42.Groups > Public groups (not visible if groups are not supported by the network) — the list of bookmarks to public groups provided by the service provider is displayed. To start a IM session with a group, scroll to a group, and select Join. Enter the screen name that you want to use as your nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can create a private group. See “Groups,” p. 43.Search > Users or Groups — to search for other IM users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group, or by group name, topic, or ID.Options > Chat or Join group — to start the conversation when you have found the user or the group that you want.Accept or reject an invitationIn the standby mode, when you are connected to the IM service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to the invitation you want, and select Open. To join the private group conversation, select Accept, and enter the screen name you want to use
Messaging42DRAFTas your nickname. To reject or delete the invitation, select Options > Reject or Delete.Read an instant messageIn the standby mode, when you are connected to the IM service, and you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read.If you receive more than one message, the number of messages followed by new instant messages is displayed. Select Read, scroll to a message, and select Open.New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. To save a new contact that is not in the phone memory, select Options > Save contact.Participate in a conversationTo join or start an IM session, write your message; and select Send, or press the call key. Select Options to view the available options.If you receive a new message during a conversation from a person who is not taking part in the current conversation,   is displayed, and the phone sounds an alert tone.Write your message; and select Send, or press the call key. Your message is displayed, and the reply message is displayed below your message.Add IM contactsWhen connected to the IM service, in the IM main menu select Options > Add contact.Select By mobile number, Enter ID manually, Search from serv., or Copy from server (depending on service provider). When the contact is successfully added, the phone confirms it.Scroll to a contact. To start a conversation, select Chat.
Messaging43DRAFTBlock or unblock messagesWhen you are in a conversation and want to block messages, select Options > Block contact. A confirmation query is shown, select OK to block messages from this contact.To block messages from a specific contact in your contacts list, scroll to the contact in Conversations, Online or Offline and select Options > Block contact > OK.To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to the contact you want to unblock and select Unblock > OK.GroupsYou can create your own private groups for an IM conversation, or use the public groups provided by the service provider. The private groups exist during an IM conversation only, and the groups are saved on the server of the service provider. If the server you are logged onto does not support group services, all group-related menus are dimmed.PublicYou can bookmark public groups that your service provider may maintain. Connect to the IM service, and select Groups > Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, enter your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group.To search for a group, select Groups > Public groups > Search groups. You can search for a group by a member in the group, by group name, topic, or ID.PrivateConnect to the IM service, and from the main menu select Options > Create group. Enter the name for the group and the screen name that you want to use as your nickname. Mark the private group members in the contacts list, and write an invitation.
Messaging44DRAFT■Voice messages The voice mailbox is a network service, and you may need to subscribe to it. For details, contact your service provider.To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, search for or edit your voice mailbox number, select Voice mailbox number.If supported by the network,   will show new voice messages. Select Listen to call your voice mailbox number.■Info messages With the Info messages network service, you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider.■Service commands Select Menu > Messaging > Service commands. Write and send service requests (also known as USSD commands) to your service provider, such as activation commands for network services.■Delete messagesTo delete one or more messages from your folders, select Menu > Messaging > Delete messages > By message and scroll to the folder from which you want to delete the message. Scroll to the message you want to delete, and select Delete. If you want to delete more than one message, select Options > Mark, and then scroll to the next message, and select Mark again. When you have marked all the messages you want to delete, select Options > Delete marked.To delete all messages from a folder, select Menu > Messaging > Delete messages > By folder and the folder from which you want to delete the messages. Select Yes, and if the folder contains unread messages, the phone asks whether you want to delete them also. Select Yes again.
Messaging45DRAFTTo delete all messages from all folders, select Menu > Messaging > Delete messages > All messages, the phone asks whether you want to delete all messages from all folders. Select Yes.■Message settingsGeneralGeneral settings are common for text and multimedia messages.Select Menu > Messaging > Message settings > General settings and from the following options:Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folderOverwriting in Sent items — to select whether overwriting is allowed when messages are sent and the memory is fullFont size — to select the font size used in messagesGraphical smileys > Yes — to set the phone to replace character-based smileys with graphical onesText message and SMS e-mailThe text message settings affect the sending, receiving, and viewing of messages.Select Menu > Messaging > Message settings > Text messages and from the following options:Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider. If you select a message center stored on the SIM card, you can view the SIM message center information.Message centre in use — to select the message center in use
Messaging46DRAFTE-mail message centres > Add centre — to set the phone numbers and name of the e-mail center for sending SMS e-mail. If you select an e-mail center stored on the SIM card, you can view the SIM e-mail center information.E-mail centre in use — to select the SMS e-mail message center in useMessage validity — to select the length of time for which the network attempts to deliver your messageMessages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service)Use packet data > Yes — to set packet data as the preferred SMS bearerCharacter support > Full — to select all characters in the messages to be sent as viewedReply via same centre > Yes — to allow the recipient of your message to send you a reply using your message center (network service)Multimedia messageThe message settings affect the sending, receiving, and viewing of multimedia messages.You may receive the configuration settings for multimedia messaging as a configuration message. See “Configuration settings service,” p. 11. You can also enter the settings manually. See “Configuration,” p. 64.Select Menu > Messaging > Message settings > Multimedia msgs. and from the following options:Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)Image size (multimedia) — to define the default image size used in multimedia messagesDefault slide timing — to define the default time between slides in multimedia messagesAllow multimedia reception — to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when you are outside your home network.
Messaging47DRAFTThe default setting of the multimedia message service is generally In home network.Incoming multimedia messages — to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow multimedia reception is set to No.Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia reception is set to No, or Incoming multim. msgs. is set to Reject.Configuration settings > Configuration — only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal config. for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings.E-mailThe settings affect the sending, receiving and viewing of e-mail.You may receive the configuration settings for the e-mail application as a configuration message. See “Configuration settings service,” p. 11. You can also enter the settings manually. See “Configuration,” p. 64.To activate the settings for the e-mail application, select Menu > Messaging > Message settings > E-mail messages and from the following options:Configuration — to select the set that you would like to activateAccount — to select an account provided by the service providerMy name — to enter your name or nicknameE-mail address — to enter your e-mail addressInclude signature — to define a signature that is automatically added to the end of your e-mail when you write your messageReply-to address — to enter the e-mail address to which you want the replies to be sentSMTP user name — to enter the name that you want to use for outgoing mail
Messaging48DRAFTSMTP password — to enter the password that you want to use for outgoing mailDisplay terminal window > Yes — to perform manual user authentication for intranet connectionsIncoming server type — to select either POP3 or IMAP4 depending on the type of e-mail system that you are using. If both types are supported, select IMAP4.Incoming mail settings — to select available options for POP3 or IMAP4
Contacts49DRAFT7. Contacts  You can save names and phone numbers (contacts) in the phone memory and in the SIM card memory.The phone memory may save contacts with numbers and text items. You can also save an image for a certain number of names.Names and numbers saved in the SIM card memory are indicated by .■Search for a contactSelect Menu > Contacts > Names. Scroll through the list of contacts or enter the first letter of the name you are searching for.■Save names and phone numbersNames and numbers will be saved in the used memory. Select Menu > Contacts > Names > Options > Add new contact. Enter the last name, first name, the phone number and select Save.■Save numbers, items, or an imageIn the phone memory for contacts you can save different types of phone numbers, and short text items per name.The first number you save is automatically set as the default number, and it is indicated with a frame around the number type indicator (for example,  ). When you select a name (for example, to make a call) the default number is used unless you select another number.1. Make sure that the memory in use is Phone or Phone and SIM. 2. Scroll to the name to which you want to add a new number or text item, and select Details > Options > Add detail.3. To add a number, select Number and one of the number types.To add another detail, select an available option.
Contacts50DRAFTTo change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default.4. Enter the number or text item; to save it, select Save.5. To return to the standby mode, select Back > Exit.■Move or copy contactsYou can move or copy contacts from the phone contact memory to the SIM card memory, or vice versa. The SIM card memory can save names with one phone number attached to them.To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to the contact, and select Options > Move contact or Copy contact.To move or copy marked contacts, select Menu > Contacts > Names. Scroll to a contact, and select Options > Mark. Mark all other contacts, and select Options > Move marked or Copy marked.To move or copy all contacts, select Menu > Contacts > Move contacts or Copy contacts.■Edit contact detailsSearch for the contact you want to edit, and select Details. To edit a name, number, text item, or to change the image, select Options > Edit. You cannot edit an ID when it is on the IM contacts or Subscribed names list.■Synchronize allSynchronize your calendar, contacts data, and notes with a remote Internet server (network service). For details see “Synchronize from a server,” p. 61.■Delete contacts or detailsTo delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all
Contacts51DRAFTcontacts > From phone mem. or From SIM card. Confirm with the security code.To delete a contact, search for the desired contact, and select Options > Delete contact.To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the available options. Deleting an image from contacts does not delete it from Gallery.■Business cards You can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card > Via multimedia, Via text message, or Via Bluetooth.When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.■SettingsSelect Menu > Contacts > Settings and from the following options:Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and numbers from both memories. In that case, when you save names and numbers, they are saved in the phone memory.Contacts view — to select how the names and numbers in Contacts are displayedName display — to select whether the contact’s first or last name is displayed firstFont size — to set the font size for the list of contactsMemory status — to view the free and used memory capacity
Contacts52DRAFT■GroupsSelect Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tone and a group image.■Speed dialing To assign a phone number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want.Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search, the name, and then the number you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in “Call,” p. 62.To make a call using the speed-dialing keys, see “Speed dialing,” p. 23.■Info, service, and my numbers Select Menu > Contacts, and the following functions may be available:Info numbers — to call the information numbers of your service provider if the numbers are included on your SIM card (network service)Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM card (network service)My numbers — to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card
Call log53DRAFT8. Call log To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients.To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data conn. timer.To view how many text and multimedia messages you have sent and received, select Menu > Log > Message log.Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Note: Some timers, including the life timer, may be reset during service or software upgrades.■Positioning information The network may send you a location request. You can ensure that the network will deliver location information of your phone only if you approve it (network service). Contact your network operator or service provider to subscribe and to agree upon the delivery of location information.To accept or reject the location request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider. The phone displays 1 missed position request. To view the missed location request, select Show.To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.
Settings54DRAFT9. Settings ■Profiles Your phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments.Select Menu > Settings > Profiles. Scroll to a profile, and select it.• To activate the selected profile, select Activate.• To set the profile to be active until a certain time up to 24 hours, select Timed and set the time the profile setting shall end. When the time set for the profile expires, the previous profile that was not timed, becomes active.• To personalize the profile, select Personalise. Select the setting you want to change and make the changes. ■Themes A theme contains many elements for personalizing your phone, such as wallpaper, screen saver, and a ringing tone.Select Menu > Settings > Themes and from the following options:Select theme — to set a theme in your phone. A list of folders in Gallery opens. Open the Themes folder, and select a theme.Theme downloads — to open a list of links to download more themes■TonesYou can change the settings of the selected active profile.Select Menu > Settings > Tones. Select and change the available settings. You can find the same settings when personalizing profiles in the Profiles menu, see “Profiles,” p. 54.To set the phone to ring only upon calls from phone numbers that belong to a selected caller group, select Menu > Settings > Tones > Alert for:. Scroll to the caller group you want or All calls, and select Mark.
Settings55DRAFT■DisplayWith display settings you can personalize your phone display view.Standby mode settingsSelect Menu > Settings > Display > Standby mode settings and from the following options:Wallpaper — to set your phone to display an image or a slide as wallpaper when the phone is in the standby mode. Select Wallpapers > Image or Slide set, scroll to the folder from which you want to select the image or slide set, and select the image or slide set you want.Slide animation — to set slide animation On or Off.Standby mode font colour — to select the color for the texts on the display in the standby modeOperator logo — to set your phone to display or hide the operator logoCell info display > On — to receive information from the network operator depending on the network cell used (network service).To download more graphics, select Menu > Settings > Display > Standby mode settings > Wallpaper > Graphic downloads.Screen saver To select a screen saver from Gallery, select Menu > Settings > Display > Screen saver > Screen savers and from the options available. To download more screen savers, select Graphic downloads. To select the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On.Power saver To save some battery power, select Menu > Settings > Display > Power saver > On. A digital clock is displayed when no function of the phone is used for a certain time.
Settings56DRAFTSleep mode To save most battery power, select Menu > Settings > Display > Sleep mode > On. The display turns completely black when no function of the phone is used for a certain time.Font sizeTo set the font size for reading and writing messages, and viewing contacts and Web pages, select Menu > Settings > Display > Font size.■Time and date To change the time, time zone, and date settings, select Menu > Settings > Time and date > Clock, Date, or Auto-update of date & time (network service).When traveling to a different time zone, select Menu > Settings > Time and date > Clock > Time zone and the time zone of your location in terms of the time difference with respect to Greenwich Mean Time (GMT) or Universal Time Coordinated (UTC). The time and date are set according to the time zone and enable your phone to display the correct sending time of received text or multimedia messages. For example, GMT -5 denotes the time zone for New York (USA), 5 hours west of Greenwich/London (UK).■My shortcutsWith personal shortcuts you can quickly access to often used functions of the phone.Left selection keyTo select a function from the list for the left selection key, select Menu > Settings > My shortcuts > Left selection key.If the left selection key is Go to to activate a function, in the standby mode select Go to and the desired function on your personal shortcut list. To change the functions in your personal shortcut list, select Options and from the following options:
Settings57DRAFTSelect options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark.Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK.Right selection keyTo set one phone function from a predefined list to the right selection key, select Menu > Settings > My shortcuts > Right selection key. This menu may not be shown, depending on your service provider.Navigation key To assign other phone functions from a predefined list to the navigation key (scroll key), select Menu > Settings > My shortcuts > Navigation key.Voice commands You can call contacts and carry out phone functions by saying voice commands. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 63.The phone voice commands are active by default. Select Menu > Settings > My shortcuts > Voice commands and a phone function. Scroll to a function.   indicates that the voice tag is activated. To play the activated voice command, select Play. To use voice commands, see “Enhanced voice dialing,” p. 23. To manage the voice commands, scroll to a phone function, and select from the following options:Edit or Remove — to change or deactivate the voice command of the selected function. When you edit the voice tag text, the phone associates it to a new virtual voice tag. Add all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list. Add all or Remove all is not shown if all voice commands are active or inactive.
Settings58DRAFT■ConnectivityYou can connect your phone to compatible devices using Bluetooth wireless technology, for example, connect to a Bluetooth stereo headset and a PC at the same time. You can also define the settings for packet data dial-up connections. Bluetooth wireless technology This device is compliant with Bluetooth Specification 2.0 with Enhanced Data Rate (EDR) supporting the following profiles: dial-up networking, hands-free, headset, generic object exchange, object push, file transfer, audio/video distribution transport protocol, generic audio/video distribution, advanced audio distribution, audio/video control transport protocol, audio/video remote control, SIM access. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduces the battery life. Bluetooth wireless technology allows you to connect the phone to a compatible Bluetooth device up to 10 meters. Since devices using Bluetooth wireless technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.Set up a Bluetooth connectionSelect Menu > Settings > Connectivity > Bluetooth. Select from the following options:Bluetooth > On or Off — to activate or deactivate the Bluetooth function.   indicates an active Bluetooth connection.Search for audio enhancements — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone.
Settings59DRAFTPaired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Scroll to a device, and select Pair. Enter the Bluetooth passcode of the device to pair (associate) the device to your phone. You only must give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer.Bluetooth wireless connectionSelect Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active, select Active device. To view a list of Bluetooth devices that are currently paired with the phone, select Paired devices.Select Options to access some of the following functions depending on the status of the device and the Bluetooth connection. Select  Assign short name, or Auto-conn. without confirmation > Yes to set the phone automatically to connect to a paired Bluetooth device.Bluetooth settings To define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name.We recommend to use the setting Hidden in My phone's visibility. Always accept only Bluetooth communication from others that you agree with.Packet data Enhanced general packet radio service (EGPRS), packet data, is a network service that allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet.The applications that may use packet data are MMS, video streaming, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up.
Settings60DRAFTTo define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection and from the following options:When needed — to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated.Always online — to set the phone to automatically connect to a packet data network when you switch the phone on.   or   indicates that the GPRS or EGPRS service is available. If you receive a call or a text message or make a call during a packet data connection,   or   indicates that the GPRS or EGPRS connection is suspended (on hold).Modem settingsYou can connect the phone using Bluetooth wireless technology to a compatible PC and use the phone as a modem to enable EGPRS connectivity from the PC.To define the settings for connections from the PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, activate the access point you want to use, and select Edit active access point. Select Alias for access point, and enter a nick name for the currently selected access point. Select Packet data access point, and enter the access point name (APN) to establish a connection to a packet data network.You can also set the dial-up service settings (access point name) on your PC using the Nokia Modem Options software. See “PC Suite,” p. 90. If you have set the settings both on the PC and on your phone, the PC settings are used.Data transfer and synchronization Synchronize your data from calendar, notes, and contacts with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service).Partner listTo copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If
Settings61DRAFTyou receive data from another device, for example, a compatible mobile phone, the partner is automatically added to the list, using the contact data from the other device. Server sync and PC sync are the original items in the list.To add new partner to the list, for example a new device, select Menu > Settings > Connectivity > Data transfer > Options > Add transfer contact > Phone sync or Phone copy, and enter the settings according to the transfer type.To edit the copy and synchronize settings, select a contact from the partner list, and select Options > Edit.To delete a selected partner, select Options > Delete.Data transfer with a deviceFor synchronization Bluetooth wireless technology is used. The other device is in the standby mode.To start a data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the list, other than Server sync and PC sync. According to the settings, the selected data will be copied or synchronized.Synchronize from a PC To synchronize data from calendar, notes, and contacts from a compatible PC, use Bluetooth wireless technology. You also need Nokia PC Suite software of your phone installed on the PC. Synchronize the data in the phone contacts, calendar, and notes to correspond with the data of your compatible PC by starting the synchronization from the PC.Synchronize from a server To use a remote Internet server you have to subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a configuration message. See “Configuration settings service,” p. 11 and “Configuration,” p. 64.
Settings62DRAFTIf you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone.Select Menu > Settings > Connectivity > Data transfer > Server sync. Depending on the settings, select Initialising sync or Initialising copy.Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete if the contacts or calendar are full.■CallSelect Menu > Settings > Call and from the following options:Call divert (network service) — to divert your incoming calls. You may not be able to divert your call if some call barring functions are active. See Call barring service in “Security,” p. 65. Anykey answer > On — to answer an incoming call by briefly pressing any key, except the power, the left and right selection keys, or the end key.Automatic redial > On — to set your phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt.Speed dialling > On — Select the names and phone numbers assigned to the speed-dialing keys, 2 to 9. To dial, press and hold the corresponding number key.Call waiting > Activate — to set the network to notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 25.Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each callSend my caller ID (network service) > Yes, or Set by networkLine for outgoing calls (network service) — to select the phone line 1 or 2 to make calls, if supported by your SIM cardSlide call handling — to set the phone to answer calls when you open the slide or end the calls when you close it
Settings63DRAFT■Phone Select Menu > Settings > Phone and from the following options: Language settings > Phone language — to set the display language of your phone. If you select Automatic, the phone selects the language according to the information on the SIM card.Language settings > SIM language, to select the USIM card language. Language settings > Voice playback language — to set a language for the voice playback. See “Enhanced voice dialing,” p. 23 and “Voice commands,” p. 57.Memory status — to view the free memory and the used memory for each function in the listAutomatic keyguard — to set the keypad of your phone to lock automatically after a pre-set time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and you can set the time from 5 seconds to 60 minutes.Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On.When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.Welcome note — to enter the note you would like to be shown briefly when the phone is switched onOperator selection > Automatic — to set the phone automatically to select one of the cellular networks available in your area. With Manual, you can select a network that has a roaming agreement with your home network operator.Confirm SIM service actions — See “SIM services,” p. 89.Help text activation — to select whether the phone shows help textsStart-up tone — to select whether the phone plays a start-up tone when the phone is switched on.Flight query —to select whether Activate flight profile? appears every time the phone is switched on if the flight mode was set before switching off the device. See “Flight mode,” p. 21.
Settings64DRAFT■Enhancement This menu is shown only if the phone is or has been connected to a compatible mobile enhancement.Select Menu > Settings > Enhancements. You can select an enhancement menu if the corresponding enhancement is or has been connected to the phone. Depending on the enhancement, select from the following options:Default profile — to select the profile that you want to be automatically activated when you connect to the selected enhancementAutomatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off.Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings■Configuration You can configure your phone with settings that are required for certain services to work correctly. The services are browser, multimedia messaging, remote Internet server synchronization, e-mail application, and streaming. Get the settings from your SIM card, from a service provider as a configuration message or enter your personal settings manually. Configuration settings from up to 10 different service providers can be stored in the phone and can be managed within this menu.To save the configuration settings received by a configuration message sent by a service provider, see “Configuration settings service,” p. 11.Select Menu > Settings > Configuration and from the following options:Default configuration settings — to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider supports. To set the configuration settings of the service provider as
Settings65DRAFTdefault settings, select Options > Set as default; to delete configuration settings, select Delete.Activate default in all applications — to activate the default configuration settings for supported applicationsPreferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.Connect to service provider support — to download the configuration settings from your service provider.Device manager settings — to allow or prevent the phone from receiving phone software updates. This option may not be available, depending on your phone.Personal configuration settings — to add new personal accounts for various services manually and to activate or delete them. To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.■Security When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device.Select Menu > Settings > Security and from the following options:PIN code request — to set the phone to ask for your PIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off.PIN2 code request — to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off.Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required.
Settings66DRAFTFixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM cardClosed user group — to specify a group of people whom you can call and who can call you (network service)Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Security level > Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.Access codes — to change the security code, PIN code, PIN2 code, or barring passwordCode in use — to select whether the PIN code or UPIN code should be activeAuthority certificates or User certificates — to view the list of the authority or user certificates downloaded into your phone. See “Certificates,” p. 87.Security module settings — to view Security module details, activate Module PIN request, or change the module PIN and signing PIN. See also “Access codes,” p. 10.■Restore factory settings To reset some of the menu settings to their original values, select Menu > Settings > Restore factory settings. Enter the security code. Note that the data you have entered or downloaded are not deleted, for example, the names and phone numbers saved in contacts.
Operator menu67DRAFT10. Operator menuThis menu lets you access a portal to services provided by your network operator. The name and the icon depends on the operator. For more information contact your network operator.The operator can update this menu with a service message. For more information, refer to “Service inbox,” p. 85.11. Gallery  In this menu you can manage graphics, images, recordings and tones. These files are arranged in folders. Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.To see the list of folders, select Menu > Gallery.To see the available options of a folder, select a folder and Options. To view the list of files in a folder, select a folder and Open. To see the available options of a file, select a file and Options.
Media68DRAFT12. Media Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.■Camera You can take photos or record video clips with the built-in 2-megapixel camera. The camera produces images in .jpg format and video clips in .3gp format. You can digitally zoom up to eight times.When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.Take an imageTo open the camera viewfinder, select Menu > Media > Camera. If Video is selected as the default mode, scroll left or right.To zoom in or out, scroll up or down.To take an image, select Capture.Select Options to set Night mode on if the lighting is dim, Self-timer on to activate the self-timer, Img. sequence on to take up to 8 images in a fast sequence. The higher the resolution, the fewer images you can take sequentially.Select Options > Settings >Image preview time and a preview time to display the taken images on the display. During the preview time, select Back to take another image or Send to send the image as a multimedia message.The phone saves the image in Gallery >Images.To take another photo, select Back. To send the image as a multimedia message, select Options > Send.This device supports an image capture resolution of 1600 x 1200 pixels. The image resolution in these materials may appear different.
Media69DRAFTRecord a video clipSelect Menu > Media > Camera. To select the video mode, scroll left or right. To pause the recording, select Pause; to resume the recording, select Contin.. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips.Camera optionsTo use a filter, select Options > Effects and from the available options.To change the white balance, select Options > White balance and from the available options.To change the camera and video settings, select Options > Settings.■Media player With the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service).Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads. Setup for a streaming serviceYou may receive the configuration settings required for the streaming as a configuration message from the network operator or service provider. See “Configuration settings service,” p. 11. To enter the settings manually, see “Configuration,” p. 64.Select Menu > Media > Media player > Streaming settings and from the following options:Configuration — Only the configurations that support streaming are shown. Select a service provider, Default, or Personal config..Account — A streaming service account is contained in the active configuration settings.You can adjust the fast forwarding and rewind time step intervals used when streaming. Select Menu > Media > Media player > FF/Rew interval and the interval you want.
Media70DRAFT■Music player Your phone includes a music player for listening to music tracks, recordings, or other MP3, AAC, or WMA sound files that you have transferred to the phone with the Nokia Audio Manager application. Music files are automatically detected and added to the default track list.Play music tracks1. Select Menu > Media > Music player. The details of the first track on the default track list are shown.To use the graphical keys,  ,  ,  , or  , on the display, scroll left or right to the desired key, and select it.2. To play a track, scroll to the track that you want, and select  .To skip to the beginning of the next track, select  . To skip to the beginning of the previous track, select   twice.To rewind the current track, select and hold  . To fast forward the current track, select and hold  . Release the key at the position you want.3. To stop playing, select  .Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Music player settingsIn the Music player menu, the following options may be available:Volume — To change the volume level, scroll left or right.Play via bluetooth — Make a connection to an audio enhancement using a Bluetooth connection.Track list — View all the tracks available on the track list. To play a track, scroll to the desired track, and select Play. Select Options > Refresh all tracks or Change track list — Refresh the track list (for example, after adding new tracks to the list) or change the track list that is shown
Media71DRAFTwhen you open the Music player menu if several track lists are available in the phone.Play options > Random > On — Play the tracks in the track list in random order. Select Repeat > Current track or All tracks to play the current track or the entire track list repeatedly.Media equaliser — Open the list of media equalizer sets. See “Equalizer,” p. 73.Send — Send the selected file using MMS or a Bluetooth connection.Web page — Connect to a browser service related to the current track. This function is only available when the address of the service is included in the track.Music downloads — Download music to your phone.Memory status — View the free and used memory capacity.■Radio The FM radio depends on an antenna other than the wireless device. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Select Menu > Media > Radio. To use the graphical keys  ,  ,  , or   on the display, scroll left or right to the desired key, and select it.Save radio stations1. To start the radio station search, select and hold   or  . To change the radio frequency in 0.05-MHz steps, briefly press   or .2. To save the radio station to a memory location, 1 to 9, press and hold the corresponding number key. To save the station in the memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.3. Enter the name of the radio station, and select OK.
Media72DRAFTListen to the radioSelect Menu > Media > Radio. To scroll to the desired station, select   or  , or press the headset key; or to select a radio station location, briefly press the corresponding number keys.Select Options and from the following options:Switch off — to turn off the radioVolume — to change the volume level, scroll left or rightSave station — to save a new radio stationStations — Select the list of saved radio stations. To delete or rename a radio station, scroll to the desired station, and select Options > Delete station or Rename.Loudspeaker or Headset — Listen to the radio using the loudspeaker or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna.Set frequency — Enter the frequency of the desired radio station.You can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.■Recorder You can record pieces of speech, sound, or an active call. This is useful when recording a name and phone number for writing them down later.The recorder cannot be used when a data call or GPRS connection is active.Record sound1. Select Menu > Media > Recorder.To use the graphical keys ( ,  , or  ) on the display, scroll left or right to the desired key, and select it.2. To start the recording, select  . To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping sound approximately every 5 seconds. When
Media73DRAFTrecording a call, hold the phone in the normal position near to your ear.3. To end the recording, select  . The recording is saved in Gallery > Recordings.4. To listen to the latest recording, select Options > Play last recorded.5. To send the last recording using Bluetooth wireless technology, or a multimedia message, select Options > Send last recorded.List of recordingsSelect Menu > Media > Recorder > Options > Recordings list. The list of folders in the Gallery is shown. Open Recordings to see the list with recordings. Select Options to see file options in the Gallery. See “Gallery,” p. 67.■Equalizer You can control the sound quality when using the music player by amplifying or attenuating frequency bands.Select Menu > Media > Equaliser.To activate a set, scroll to one of the equalizer sets, and select Activate.To view, edit, or rename a selected set, select Options > View, Edit, or Rename. Not all sets can be edited or renamed.
Organizer74DRAFT13. Organizer ■Alarm clock You can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock.To set the alarm, select Alarm time, and enter the alarm time. To change the alarm time when the alarm time is set, select On. To set the phone to alert you on selected days of the week, select Repeat alarm.To select the alarm tone or set a radio station as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last station you listened to as the alarm, and the alarm plays through the loudspeaker. If you remove the headset or switch off the phone, the default alarm tone replaces the radio.To set a snooze time-out, select Snooze time-out.Stop the alarmThe phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the selected snooze time-out, then resumes.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.■Calendar Select Menu >Organiser > Calendar.The current day is indicated by a frame. Select Options and from the following options:
Organizer75DRAFTWeek view — to see a week view of the calendarMake a note — to make a note. Select one of the following note types: Meeting,  Call,  Birthday,  Memo or   Reminder, and then fill in the fields for the note type selected.Go to date — to go to a specified day in the calendarGo to today — to go to todays date in the calendarSettings — to set the date, time and other settings for the calendarGo to to-do list — to go to the to-do listIf there are any notes set for a day, when you enter the calendar, the day is in bold type. To view the day notes, select View. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.Other options for the calendar day view are delete, edit, move, or repeat a note; copy a note to another day; send a note with Bluetooth wireless technology; or send a note to the calendar of another compatible phone as a text message or multimedia message. In Options >Settings, besides setting the date and time, you can also set the time zone, the date and time formats, a calendar tone, the default view and what day the starts on. In the Auto-delete notes option you can set the phone to delete old notes automatically after a specified time.A note alarmThe phone beeps and displays the note. With a call note   on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze. To stop the alarm without viewing the note, select Exit.
Organizer76DRAFT■To-do list To save a note for a task that you must do, select Menu > Organiser > To-do list.To make a note if no note is added, select Add; otherwise, select Options > Add. Write the note, and select the priority, the deadline, the alarm type for the note, and Save.To view a note, scroll to it, and select View.You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar.While viewing a note, you can also select an option to edit the deadline or priority for the note, or mark the note as done.■Notes To use this application to write and send notes, select Menu > Organiser > Notes. To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write a note, and select Save.Other options for notes include deleting and editing a note. While editing a note, you can also exit the text editor without saving the changes. You can send the note to compatible devices using a text message, a multimedia message, or Bluetooth wireless technology.■Calculator The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root and converts currency values.Note: This calculator has limited accuracy and is designed for simple calculations.Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter the first number in the calculation, press # for a decimal point. Select Options >Add, Subtract, Multiply, Divide, Square, Square root, or Change sign. Enter the second number. For a total, select
Organizer77DRAFTEquals. As many times as it is necessary, select Options and the option again. To start a new calculation, select and hold Clear.Perform a currency conversionSelect Menu > Organiser > Calculator. To save the exchange rate, select Options > Exchange rate. Select either of the displayed options. Enter the exchange rate, press # for a decimal point, and select OK. The exchange rate remains in the memory until you replace it with another one. To perform the currency conversion, enter the amount to be converted, select Options > In domestic, or In foreign.■Countdown timer Select Menu > Organiser > Countd. timer. Enter the alarm time in hours, minutes, and seconds, and select OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up. To stop the alarm, press any key. If no key is pressed, the alarm automatically stops within 30 seconds. To stop the alarm and to delete the note text, select Exit. To restart the countdown timer, select Restart.■Stopwatch To measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Select Menu > Organiser > Stopwatch and from the following options:Split timing — to take intermediate times. To start the time observation, select Start. Select Split when you want to take an intermediate time. To stop the time observation, select Stop. To save the measured time, select Save. To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without
Organizer78DRAFTsaving it, select Options > Reset. To set the stopwatch timing in the background, press the end key.Lap timing — to take lap times. To set the stopwatch timing in the background, press the end key.Continue — to view the timing that you have set in the backgroundShow last — to view the most recently measured time if the stopwatch is not resetView times or Delete times — to view or delete the saved times
Applications79DRAFT14. Applications ■Games Your phone software includes some games. Launch a gameSelect Menu > Applications > Games. Scroll to the desired game, and select Open.For options related to a game, see “Other application options,” p. 79.Game downloadsSelect Menu > Applications > Options > Downloads > Game downloads. The list of available bookmarks is shown.Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Game settingsTo set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings.■CollectionYour phone software includes some Java applications specially designed for this Nokia phone. Launching an applicationSelect Menu > Applications > Collection. Scroll to an application, and select Open.Other application optionsDelete — to delete the application or application set from the phoneDetails — to give additional information about the application
Applications80DRAFTUpdate version — to check if a new version of the application is available for download from Web (network service)Web page — to provide further information or additional data for the application from an Internet page. This feature must be supported by the network. It is only shown if an Internet address has been provided with the application.Application access — to restrict the application from accessing the network. Different categories are shown. Select in each category, if available, one of the following permissions: Ask every time and the phone asks always for net access, Ask first time only and the phone asks on first attempt to net access, Always allowed to allow the net access, or Not allowed to not allow the net access.Download an applicationYour phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it.Only install and use applications and other software from sources that offer adequate security and protection against harmful software.You can download new Java applications in different ways:Select Menu > Applications > Options > Downloads > App. downloads, and the list of available bookmarks is shown. Select the appropriate bookmark to connect to the desired page. For the availability of different services, pricing, and tariffs, contact your service provider.Use the game download function. See “Game downloads,” page 79.Use the Nokia Application Installer from PC Suite to download the applications to your phone.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.When downloading an application, it may be saved in the Games menu instead of the Applications menu.
Web81DRAFT15. WebYou can access various mobile Internet services with your phone browser.Important: Use only services that you trust and that offer adequate security and protection against harmful software.Check the availability of these services, pricing, tariffs, and instructions with your service provider.With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size. You may not be able to view all details of the Internet pages.■Access and use services1. Save the service settings that are required to access the service that you want to use. See “Set up browsing,” p. 81.2. Make a connection to the service. See “Connect to a service,” p. 81.3. Start browsing the pages of the service. See “Browse pages,” p. 82.4. When you finish browsing, end the connection to the service. To disconnect, see “Options while browsing,” p. 83.■Set up browsingYou may receive the configuration settings required for browsing as a configuration message from the network operator or service provider that offers the service that you want to use. See “Configuration settings service,” p. 11. You can also enter all the configuration settings manually. See “Configuration,” p. 64.■Connect to a serviceEnsure that the correct configuration settings of the service that you want to use are activated.
Web82DRAFT1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings.2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal config. for browsing. See “Set up browsing,” p. 81.3. Select Account and a browsing service account contained in the active configuration settings.4. Select Display terminal window > Yes to perform manual user authentication for intranet connections.Make a connection to the service in one of the following ways:• Select Menu > Web > Home; or in the standby mode, press and hold 0.• To select a bookmark of the service, select Menu > Web > Bookmarks.• To select the last URL, select Menu > Web > Last web address.• To enter the address of the service, select Menu > Web > Go to address. Enter the address of the service, and select OK.■Browse pagesAfter you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider.If packet data is selected as the data bearer,   is shown on the top left of the display during browsing. If you receive a call or a text message, or make a call during a packet data connection,   indicates that the packet data connection is suspended (on hold). After a call the phone tries to reconnect the packet data connection.Browse with phone keysTo browse through the page, scroll in any direction.To select a highlighted item, press the call key, or select Select.
Web83DRAFTTo enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *.Options while browsingSelect from the following options:Shortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts.Home — to return to your start pageAdd bookmark — to save the page as a bookmarkBookmarks — to access the list of bookmarks. See “Bookmarks,” p. 83.Go to address — to enter the address of a new servicePage options — to show the list of options for the active pageHistory — to get a list showing the last visited URLsDownloads — to access the list of available download servicesOther options — to show a list of other optionsReload — to reload and update the current pageQuit — to disconnect from a serviceThe service provider may also offer other options.Direct callingThe browser supports functions that you can access while browsing. You can make a phone call, send DTMF tones while a voice call is in progress, and save a name and a phone number from a page.■BookmarksYou can save page addresses as bookmarks in the phone memory.1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with the bookmark.
Web84DRAFT3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.Receive a bookmarkWhen you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To view the bookmark, select Show.■Appearance settingsWhile browsing, select Options > Other options > Appearance settings, or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options:Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated.Font size — to set the font sizeShow images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures.Alerts > Alert for unsecure connection > Yes — to set the phone to alert when a secure connection changes to an unsecure one during browsingAlerts > Alert for unsecure items > Yes — to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see “Browser security,” p. 86.Character encoding > Content encoding — to select the encoding for the browser page contentCharacter encoding > Unicode (UTF-8) web addresses > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a Web page created in foreign language.JavaScript > Enable — to enable the Java scripts
Web85DRAFT■Security settingsCookiesA cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 86.While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.Scripts over secure connectionYou can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.While browsing, to allow the scripts, select Options > Other options > Security > WMLScript settings; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts over secure connection > Allow.■Service inboxThe phone is able to receive service messages (pushed messages) sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service.To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete.
Web86DRAFTService inbox settingsSelect Menu > Web > Settings > Service inbox settings.To set whether you want to receive service messages, select Service messages > On or Off.To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels.To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.■Cache memoryA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.To empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache.■Browser securitySecurity features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.Security moduleThe security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider.
Web87DRAFTSelect Menu > Web > Settings > Security settings > Security module settings and from the following options:Security module details — to show the security module title, status, manufacturer, and serial numberModule PIN request — to set the phone to ask for the module PIN when using services provided by the security module. Enter the code, and select On. To disable the module PIN request, select Off.Change module PIN — to change the module PIN, if allowed by the security module. Enter the current module PIN code, then enter the new code twice.Change signing PIN — to change the signing PIN code for the digital signature. Select the signing PIN you want to change. Enter the current PIN code, then enter the new code twice.See also “Access codes,” p. 10.Certificates Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider.To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security settings > Authority certificates or User certificates.
Web88DRAFTThe security indicator   is displayed during a connection, if the data transmission between the phone and the content server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Digital signatureYou can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown.Check that the header text is Read and that the digital signature icon  is shown.If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.To sign the text, read all of the text first, then select Sign.The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.Select the user certificate you want to use. Enter the signing PIN (see “Access codes,” p. 10), and select OK. The digital signature icon disappears, and the service may display a confirmation of your purchase.
SIM services89DRAFT16. SIM servicesYour SIM card may provide additional services that you can access. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend on the SIM card.For availability and information on using SIM services, contact your SIM card vendor. This may be the service provider, network operator or other vendor.To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM service actions > Yes.Accessing these services may involve sending messages or making a phone call for which you may be charged.
PC connectivity90DRAFT17. PC connectivity■PC Suite You can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through a Bluetooth wireless technology connection. You can use your phone with a variety of PC connectivity and data communications applications.With PC Suite you can synchronize contacts, calendar and to-do notes, and notes between your phone, and the compatible PC, or a remote Internet server (network service).You may find more information about PC suite on the CD delivered with your phone, and, for example, downloadable files in the support area on the Nokia Web site, www.nokia.com/support.■Packet data, HSCSD, and CSDWith your phone you can use the packet data, HSCSD (high-speed circuit switched data), and CSD (circuit switched data, GSM data) services. For availability and subscription to data services, contact your network operator or service provider.The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data transfer.See “Packet data,” p. 59.■Data communication applicationsFor information on using a data communication application, refer to the documentation provided with it.Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation.For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Battery information91DRAFT18. Battery information■Charging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging.Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.
Battery information92DRAFT■Nokia battery authenticationAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.
Battery information93DRAFT4.  Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276.To create a text message,• For countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515.• For India only: Enter Battery followed by the 20-digit battery code, for example, Battery 12345678919876543210, and send to 5555.National and international operator charges will apply.You should receive a message indicating whether the code can be authenticated.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.
Technical Information94DRAFT19. Technical InformationWeight 139 grams (3.1 ounces) incl. BP-6X batteryBattery 700 mAh Li-Ion BatteryNetworks Wireless networks GSM 900, 1800 and 1900Size  Volume:   4.1 cubic inches (68 ccm)Length:  4.2 in (107 mm)Width:  1.8 in (45 mm)Thickness:  0.7 in (17 mm)Frequency range (Rx) GSM 900: 925 - 960 MHzGSM1800: 1805 - 1880 MHzGSM1900: 1930 - 1990 MHzFrequency range (Tx) GSM 900: 880 - 915 MHzGSM 1800: 1710 - 1785 MHzGSM1900: 1850 - 1910 MHzTx output power 2 W (max)Battery voltage 3.7 V DCNumber of channels GSM 900: 174GSM 1800: 374GSM1900: 299Memory size 16 MB flash memory16 MB RAMOperating temperature 59 °F to 77 °F(15 °C to 25 °C)
Care and maintenance95DRAFTCare and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Do not touch the main display with hard or angular materials. Objects like earrings or jewellery may scratch the display.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.
Additional safety information96DRAFTAdditional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.■Operating environmentRemember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PacemakersPacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:
Additional safety information97DRAFT• Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker• Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you suspect interference, switch off your device, and move the device away.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel
Additional safety information98DRAFTdepots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.■Emergency callsImportant: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequate signal strength.Some networks may require that a valid SIM card is properly inserted in the device.2. Press the end key as many times as needed to clear the display and ready the device for calls.3. Enter the official emergency number for your present location. Emergency numbers vary by location.4. Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. If the device is in the offline or flight mode, you must change the profile to activate the phone function before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.
Additional safety information99DRAFT■Certification information (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.36 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over 1 gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 0.36 W/kg and when properly worn on the body is 0.27 W/kg. Information about this device model can be found athttp://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QTKRM-165.
APPENDIX100DRAFTAPPENDIX■A message from the CTIA© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need.When it comes to the use of wireless phones, safety is your most important call.Wireless phone "Safety Tips"1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory.
APPENDIX101DRAFTAlso, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. .Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.
APPENDIX102DRAFT9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!10. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.11. Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85■Message from the FDAThe U.S. Food and Drug Administration (FDA) provides the following consumer information about wireless phones.See http://www.fda.gov/cellphones/ for updated information.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless
APPENDIX103DRAFTphones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.
APPENDIX104DRAFTFDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the
APPENDIX105DRAFTexposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing
APPENDIX106DRAFTmore than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.How does FCC Audit Cell Phone RF?After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct “post-grant” testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that does not meet FCC’s regulatory requirements may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important post-grant test, from a consumer’s perspective, is testing of the RF emissions of the phone. FCC measures the Specific Absorption Rate (SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the test measurement may be less than or greater than the actual RF emitted by the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis.FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted by current measurement standards was added to the maximum permissible SAR, the resulting SAR value would be well below any level known to produce an acute effect. Consequently, FCC’s approach with measurement uncertainty will not
APPENDIX107DRAFTresult in consumers being exposed to any known risk from the RF emitted by cellular telephones.FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years). If new information leads FDA to believe that a change to FCC’s measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach.Updated July 29, 2003

Navigation menu