Microsoft RM-170 GSM 850/900/1800/1900MHz Cellphone w/BT User Manual Manual rev

Microsoft Mobile Oy GSM 850/900/1800/1900MHz Cellphone w/BT Manual rev

Contents

Manual rev

Nokia E50 User Guide9252490Issue 1file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 1 Jun 26, 2006 9:34:16 AM
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-170 / RM-171 product is in compliance with the essential requirementsand other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at www.nokia.com/phones/declaration_of_conformity/.Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and companynames mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.This product includes software licensed from Symbian Software Ltd (c) 1998-2004. Symbian and Symbian OS are trademarks of SymbianLtd.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2004. Tegic Communications, Inc. All rights reserved. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoevercaused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including,but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability orcontents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice0434file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 2 Jun 26, 2006 9:34:16 AM
The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.EXPORT CONTROLSThis device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contraryto law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment.9252490/Issue 1file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 3 Jun 26, 2006 9:34:16 AM
ContentsFor your safety..............................................................7NETWORK SERVICES...................................................................8Enhancements, batteries, and chargers............................8Your device.....................................................................9Menu key and joystick............................................................9Standby modes.........................................................................9Menu..........................................................................................10Common actions in several applications........................11Search........................................................................................11Write text.................................................................................12Change writing language....................................................13Volume control.......................................................................13Profiles......................................................................................13Themes......................................................................................14Transfer content between devices...................................14Memory.....................................................................................15Help and tutorial....................................................................16Nokia PC Suite.........................................................................17Calls and voice applications....................................18Make calls.................................................................................181-touch dial..............................................................................18Answer a call...........................................................................19Forward calls...........................................................................19Call restriction.........................................................................19Log..............................................................................................20Push to talk..............................................................................20Device security .......................................................................20Voice mailbox..........................................................................22Voice commands....................................................................22Voice aid...................................................................................23Recorder....................................................................................24Text to speech.........................................................................24Contacts........................................................................26Manage contact groups.......................................................26Manage default information..............................................27Copy contacts between SIM and devicememory.....................................................................................27Select ringing tones for contacts......................................27Business cards.........................................................................27Calendar........................................................................29Create calendar entries........................................................29To-do..........................................................................................29Calendar views........................................................................30Add a received calendar entry to your calendar..........30Messages......................................................................31Organize messages...............................................................31Messaging settings................................................................32Text messages........................................................................32Multimedia messages...........................................................34E-mail messages.....................................................................37Instant messaging.................................................................42Special messages...................................................................43Team suite...................................................................44Team suite settings...............................................................44Contentsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 4 Jun 26, 2006 9:34:16 AM
Office applications.....................................................45Notes..........................................................................................45Calculator..................................................................................45Converter..................................................................................45File manager...........................................................................46Quickoffice...............................................................................46PDF reader................................................................................47Zip manager............................................................................48Clock...........................................................................................48Connectivity.................................................................49Internet access points..........................................................49Cable connection....................................................................50Bluetooth..................................................................................50SIM access profile...................................................................53Infrared.....................................................................................54Data connections...................................................................55Connection manager............................................................55Modem......................................................................................56Mobile VPN ..............................................................................56Data synchronization............................................................57Web................................................................................58Access points...........................................................................58Browse the Web.....................................................................58Bookmarks...............................................................................59End a connection....................................................................59News feeds and blogs..........................................................59Web settings...........................................................................60Services.....................................................................................60Camera..........................................................................62Take a picture.........................................................................62Record a video clip................................................................62Insert pictures into messages............................................63Insert videos into messages...............................................63Settings.....................................................................................63Media applications....................................................64Nokia Catalogs........................................................................64Settings.........................................................................65Phone settings........................................................................65Call settings..............................................................................66Connection settings..............................................................67Date and time settings.........................................................69Security settings.....................................................................69Enhancement settings.........................................................69Tools...............................................................................70Location services....................................................................70Sett. wizard..............................................................................70Application manager............................................................70Device management.................................................72Remote configuration network service..........................72Nokia original enhancements...............................73Enhancements........................................................................73Battery information..................................................74Talk and standby times........................................................74Nokia battery authentication guidelines.......................75Care and maintenance.............................................77Additional safety information...............................78Operating environment.......................................................78Contentsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 5 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 5 Jun 26, 2006 9:34:16 AM
Medical devices.......................................................................78Vehicles.....................................................................................79Potentially explosive environments................................79Emergency calls......................................................................79CERTIFICATION INFORMATION(SAR)...................................80Technical information..............................................82Index..............................................................................83Contentsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 6 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 6 Jun 26, 2006 9:34:16 AM
For your safetyRead these simple guidelines. Not following them maybe dangerous or illegal. Read the complete user guidefor further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it may causeinterference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your handsfree to operate the vehicle while driving.Your first consideration while driving shouldbe road safety.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device offnear medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices cancause interference in aircraft.SWITCH OFF WHEN REFUELLINGDo not use the device at a refueling point. Donot use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the devicewhere blasting is in progress.USE SENSIBLYUse only in the normal position as explainedin the product documentation. Do not touchthe antennas unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repairthis product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.BACK-UP COPIESRemember to make back-up copies or keepa written record of all importantinformation.CONNECTING TO OTHER DEVICESWhen connecting to any other device, readits user guide for detailed safety instructions.Do not connect incompatible products.7For your safetyfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 7 Jun 26, 2006 9:34:16 AM
EMERGENCY CALLSEnsure the phone function of the device isswitched on and in service. Press the end keyas many times as needed to clear the displayand return to the standby mode. Enter theemergency number, then press the call key.Give your location. Do not end the call untilgiven permission to do so.NETWORK SERVICESTo use the phone you must have service from a wirelessservice provider. Many of the features in this devicedepend on features in the wireless network to function.These network services may not be available on allnetworks or you may have to make specificarrangements with your service provider before youcan utilize network services. Your service provider mayneed to give you additional instructions for their useand explain what charges will apply. Some networksmay have limitations that affect how you can usenetwork services. For instance, some networks may notsupport all language-dependent characters andservices.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, they will not appear on your device menu. Yourdevice may also have been specially configured. Thisconfiguration may include changes in menu names,menu order and icons. Contact your service provider formore information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as MMS, browsing, e-mail, and contentdownloading using the browser or over MMS, requirenetwork support for these technologies.Enhancements, batteries,and chargersCheck the model number of any charger before use withthis device. This device is intended for use whensupplied with power from the AC-4 and DC-4 chargers.Warning: Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types mayinvalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect the powercord of any enhancement, grasp and pull the plug, notthe cord.Your device and its enhancements may contain smallparts. Keep them out of reach of small children.8For your safetyfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 8 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 8 Jun 26, 2006 9:34:16 AM
Your deviceNote: Your service provider may have requestedthat certain features be disabled or not activated inyour device. If so, they do not appear on your devicemenu. Your device may also have been speciallyconfigured for your network provider. Thisconfiguration may include changes in menu names,menu order and icons. Contact your service provider formore information.Model numbers: Nokia E50-1 (RM-170, with camera)and Nokia E50-2 (RM-171, without camera).Hereinafter referred to as Nokia E50.When you switch the device on, it may recognize theSIM card provider and configure the correct textmessage, multimedia message, and GPRS settingsautomatically. If not, contact your service provider forthe correct settings, or use the Sett. wizard application.Menu key and joystickTo access the applications in your device, press theMenu key in the standby modes. To return to Menu froman application, leaving the application open in thebackground, press the Menu key. Press and hold theMenu key to see a list of the active applications andswitch between them. Leaving applications running inthe background increases the demand on batterypower and reduces the battery life.In this user guide, "select Menu" refers to pressing theMenu key.Use the joystick to move and make selections. With thejoystick, you can move up, down, left and right in theMenu or in different applications or lists. You can alsopress the joystick to open applications, files, or editsettings.Standby modesYour device has two different standby modes: activestandby mode and standby mode.Active standbyAfter you have switched on your device and it is readyfor use, but you have not entered any characters ormade other selections, the device is in the activestandby mode. In the active standby mode, you canview your service provider and network, differentindicators such as indicators for alarms, andapplications you want to access fast.To select applications that you want to access fromactive standby, select Menu > Tools > Settings >Phone > Standby mode > Standby apps. Scroll to thedifferent shortcut settings, and press the joystick. Scrollto the desired application, and press the joystick.9Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 9 Jun 26, 2006 9:34:16 AM
To use the basic standby mode, select Menu > Tools >Settings > Phone > Standby mode > Active standby >Off.Tip: You can also see the messages in amessaging folder such as inbox or mailbox inthe active standby mode. Select Menu >Messag. > Options > Settings > Other and thefolders in Active standby mode.StandbyIn the standby mode, you can see different information,such as your service provider, time, and differentindicators, such as indicators for alarms. The joystickshortcuts are not available in the active standby mode,where the joystick is used for normal scrolling.Shortcuts in standby modeTo view the most recently dialed numbers, press the callkey. Scroll to a number or name, and press the call keyagain to call the number.To call your voice mailbox (network service), press andhold 1.To view calendar information, scroll right.To write and send text messages, scroll left.To open Contacts, press the top side key.To change the profile, press the power key briefly, scrollto the profile you want, and press the joystick toactivate the profile.To open Services and connect to the Web, press andhold 0.To change these shortcuts, select Menu > Tools >Settings > Phone > Standby mode.MenuThe Menu is a starting point from which you can openall applications in the device or on a memory card. TheMenu contains applications and folders, which aregroups of similar applications. Use the joystick to scrollup and down on the screen.Applications that you install are saved in the Installat.folder by default.To open an application, scroll to it, and press thejoystick.To view the applications in a list, select Options >Change view > List. To return back to the grid view,select Options > Change view > Grid.To view the memory consumption of differentapplications and data stored on the device or memorycard and to check the amount of free memory, selectOptions > Memory details and the memory.To rearrange the folder, scroll to the application youwant to move, and select Options > Move. A check markis placed beside the application. Scroll to a new location,and select OK.To move an application to a different folder, scroll tothe application you want to move to another folder, andselect Options > Move to folder, the new folder, andOK.To download applications from the Web, selectOptions > App. downloads.10Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 10 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 10 Jun 26, 2006 9:34:16 AM
To create a new folder, select Options > New folder. Youcannot create folders inside folders.To rename a new folder, select Options > Rename.Tip: To switch between several openapplications, press and hold the menu key. Theapplication-switching window opens anddisplays the open applications. Scroll to anapplication, and press the joystick to switch toit.Common actions in severalapplicationsYou can find the following actions in severalapplications:To change the profile or switch off or lock the device,press the power key briefly.To save a file, select Options > Save. There are differentsave options depending on the application you use.To send a file, select Options > Send. You can send a filein an e-mail or multimedia message, or using infraredor Bluetooth.To copy, press and hold the edit key, and select the textwith the joystick. Press and hold the edit key, and selectCopy. To paste, scroll to where you want to paste thetext, press and hold the edit key, and select Paste. Thismethod may not work in applications such asDocuments that have their own copy and pastecommands.To delete a file, press the clear key, or select Options >Delete.To select different items, such as messages, files, orcontacts, scroll up, down, left or right to highlight theitem you want to select. Select Options > Mark/Unmark > Mark to select one item or Options > Mark/Unmark > Mark all to select all items.To select an object (for example, an attachment in adocument) scroll to the object so that square markersappear on each side of the object.SearchYou can search for information in your contacts, notes,calendar appointments, to-do notes, e-mail messages,and text messages. You can also search for files by thefile names in your device memory and memory card.Select Menu > Office > Search.Select the content types you want to search in. Toremove the selection, select it again. To include allcontent types in your search, select All. Enter yoursearch keywords or the beginning of the keywords.Select Search.Tip: Wildcards may help you find items. In yoursearch keyword, use ? to substitute a singlecharacter, and * to substitute zero or morecharacters.To include two words in your search, separatethem with a space. You will only find items thatcontain both keywords.11Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 11 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 11 Jun 26, 2006 9:34:16 AM
To find exact matches for a complete phrase,enclose the phrase in quotation marks.To view your previous searches, select Options >Previous results.Write textTraditional text input is shown on the top right of the display when youare writing text using traditional text input. and indicate the selected case. indicates that the first letter of the sentence is writtenin uppercase and all the other letters will automaticallybe written in lowercase. indicates number mode.•Press a number key 1–9 repeatedly until the desiredcharacter appears. There are more charactersavailable for a number key than are printed on thekey.•To insert a number, press and hold the number key.•To switch between letter and number mode, pressand hold #.•If the next letter is located on the same key as thepresent one, wait until the cursor appears, and enterthe letter.•To erase a character, press the clear key. Press andhold the clear key to clear more than one character.•To access the most common punctuation marks,press the 1 key. Press 1 repeatedly to reach thedesired punctuation mark. Press * to open a list ofspecial characters. Use the joystick to move throughthe list, and select a character.•To insert a space, press 0. To move the cursor to thenext line, press 0 three times.•To switch between the different character cases,press #.Predictive text input1. To activate predictive text input, press the edit key,and select Predictive text on. This activatespredictive text input for all editors in the device. Theindicator is shown on the top right of thedisplay when you are writing text using predictivetext input.2. To write the desired word, press 2–9. Press each keyonly once for one letter.3. When you have finished writing the word and it iscorrect, to confirm it, scroll right, or press 0 to adda space.If the word is not correct, press * repeatedly to viewthe matching words the dictionary has found oneby one.If the ? character is shown after the word, the wordyou intended to write is not in the dictionary. To adda word to the dictionary, select Spell, enter the word(up to 32 letters) using traditional text input, andselect OK. The word is added to the dictionary. Whenthe dictionary is full, a new word replaces the oldestadded word.4. Start writing the next word.12Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 12 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 12 Jun 26, 2006 9:34:16 AM
Tip: To set predictive text input on or off, press# twice quickly.Write the first half of a compound word; to confirm it,scroll right. Write the last part of the compound word.To complete the compound word, press 0 to add aspace.To turn predictive text input off for all editors in thedevice, press the edit key, and select Predictive text >Off.Copy text to the clipboard1. To select letters and words, press and hold the editkey. At the same time, scroll in the directionnecessary to highlight the word, phrase, or line oftext you want to copy. As the selection moves, thetext is highlighted.2. To copy the text to the clipboard, while still holdingthe edit key, select Copy. To insert the text into adocument, press and hold the edit key, and selectPaste.Change writing languageWhen you are writing text, you can change the writinglanguage. For example, if you press the 6 key repeatedlyto reach a specific character, changing the writinglanguage gives you access to different characters in adifferent order.If you are writing text using a non-Latin alphabet andwant to write Latin characters, for example e-mail orWeb addresses, you may need to change the writinglanguage. To change the writing language, press theedit key, select Writing language, and a writinglanguage that uses Latin characters.Volume controlWarning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To adjust the volume during a call, press the volumekeys.To adjust the volume when using the loudspeaker,press the volume keys.ProfilesWarning: In the offline profile you cannot makeor receive any calls, or use other features that requirenetwork coverage. Calls still may be possible to theofficial emergency number programmed into yourdevice. To make calls, you must first activate the phonefunction by changing profiles. If the device has beenlocked, enter the lock code.Select Menu > Tools > Profiles.You can adjust and customize the ringing tones, alerttones, and other device tones for different events,environments, or caller groups.To customize a profile, scroll to the desired profile inthe list, and select Options > Customize.13Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 13 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 13 Jun 26, 2006 9:34:16 AM
Define the following settings:•Ringing tone — Select a ringing tone from the list,or select Tone downloads to open a bookmark foldercontaining a list of bookmarks for downloadingtones using the browser. To listen to the selectedtone, select Play. If you have two alternate phonelines in use, you can specify a ringing tone for eachline.•Say caller's name — Activate the text-to-speechringing tone feature. When someone from yourcontacts list calls you, the device sounds a ringingtone that is a combination of the spoken name ofthe contact and the selected ringing tone.•Ringing type — Select how you want the ringingtone to alert.•Ringing volume — Select the volume level of theringing tone.•Message alert tone — Select a tone for received textmessages.•E-mail alert tone — Select a tone for received e-mailmessages.•Vibrating alert — Select whether you want thedevice to vibrate when you receive a call.•Keypad tones — Set the volume level of the devicekeypad tones.•Warning tones — Set the warning tones on or off.•Alert for — You can set the device to ring only uponcalls from phone numbers that belong to a selectedcontact group. Phone calls coming from outside thatgroup have a silent alert.•Profile name — You can give a name to a new profileor rename an existing profile. The Normal andOffline profiles cannot be renamed.The Offline profile prevents your device fromaccidentally switching on, sending or receivingmessages, or using Bluetooth; it also closes anyInternet connection that may be in operation whenthe profile is selected.To change a profile, scroll to the desired profile in thelist, and select Options > Activate.To create a new profile, select Options > Create new,and define the settings.ThemesSelect Menu > Tools > Themes.With Themes, you can change the look of the display ofyour device. For example, you can change thebackground image and the colors on the display.For more information, see the extended user guide onthe Web.Transfer content betweendevicesYou can transfer content, such as contacts, from acompatible Nokia device to your Nokia E50 usingBluetooth connectivity or infrared. The type of contentthat can be transferred depends on the phone model.If the other device supports synchronization, you canalso synchronize data between the other device andyour Nokia E50.14Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 14 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 14 Jun 26, 2006 9:34:16 AM
Transfer data with Bluetooth orinfraredTo start transferring data from a compatible device,select Menu > Tools > Transfer.Bluetooth connectivity1. In the information view, select Continue.2. Select Via Bluetooth. Both devices must support theselected connection type.3. Activate Bluetooth in your other device, and selectContinue in your Nokia E50 to start searching fordevices with active Bluetooth connectivity.4. Select Stop in your Nokia E50 after it has found yourother device.5. Select your other device from the list. You are askedto enter a passcode (1 to 16 digits) on your NokiaE50. The passcode is used only once to confirm thisconnection.6. Enter the code on your Nokia E50, and select OK.Enter the passcode on your other device, and selectOK. The devices are now paired. See "Pairdevices," p. 52.For some phone models, the Transfer dataapplication is sent to your other device as amessage. To install Transfer data on your otherdevice, open the message, and follow theinstructions on the display.7. From your Nokia E50, select the content you wantto transfer from your other device, and OK.Infrared connectivity1. In the information view, select Continue.2. Select Via infrared. Both devices must support theselected connection type.3. Connect the two devices. See "Infrared," p. 54.4. From your Nokia E50, select the content you wantto transfer from your other device, and OK.Content is copied from the memory of the other deviceto the corresponding location in your device. Copyingtime depends on the amount of data to be transferred.You can also cancel and continue later.The necessary steps for data transfer may varydepending on your device, and whether you haveinterrupted data transfer earlier. The items that you cantransfer vary depending on the other device.For more information, see the device help in Transferor extended user guide on the Web.MemoryThere are two types of memory into which you can savedata or install applications: device memory andremovable memory.Memory detailsSelect Menu, and Options > Memory details and Phonemem. or Memory card.You can see how much memory is currently in use, howmuch free memory remains, and how much memory isconsumed by each data type. For example, you can seehow much memory your e-mail messages, textdocuments, or calendar appointments consume.15Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 15 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 15 Jun 26, 2006 9:34:16 AM
Tip: To ensure that you have adequatememory, you should regularly delete ortransfer data to a memory card or PC.Memory cardKeep all memory cards out of the reach of smallchildren.Your Nokia device supports the FAT16 and FAT32 filesystems for memory cards. If you use a memory cardfrom another device or if you want to ensurecompatibility of the memory card with your Nokiadevice, you may need to format the memory card withyour Nokia device. However, all data in the memory cardis permanently deleted if you format the memory card.It is recommended to back up device memory regularlyto the memory card. The information can be restoredto your device later. To back up information from devicememory to a memory card, select Menu > Tools >Memory card > Options > Backup phone mem. Torestore information from the memory card to thedevice memory, select Menu > Tools > Memory card >Options > Restore from card.Do not remove a memory card when the card is beingaccessed. Removing the card in the middle of anoperation may damage the memory card as well as thedevice, and data stored on the card may be corrupted.If you cannot use a memory card in your device, youmay have the wrong type of memory card, the card maynot be formatted for your device, or the card has acorrupted file system.Tip: You can install and remove a memory cardwithout removing the battery or powering offthe device.MicroSDUse only microSD cards approved by Nokia for use withthis device. Nokia utilizes the approved industrystandards for memory cards but not all other brandsmay function correctly or be fully compatible with thisdevice.This device uses a microSD memory card.To ensure interoperability, use onlycompatible microSD cards with this device.Check the compatibility of a microSD card with itsmanufacturer or provider. Other memory cards thanmicroSD cards are not compatible with this device.Using an incompatible memory card may damage thememory card as well as the device, and data stored onthe incompatible card may be corrupted. Keep allmemory cards out of the reach of small children.Help and tutorialYou can find answers to your questions while using thedevice even with no user guide present, because yourdevice includes both a task-specific help and a tutorial.Tip: Task-specific means you can accessinstructions from Options lists.16Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 16 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 16 Jun 26, 2006 9:34:16 AM
Device helpTo read instructions for the current view of the openapplication, select Options > Help.Tip: You can also select Menu > Tools > Help tobrowse Help topics and conduct searches.In Help, you can select categories for which you wantto see instructions. Scroll to a category, such asMessaging, and press the joystick to see whatinstructions (help topics) are available. While you arereading the topic, scroll left or right to see the othertopics in that category.When you are reading the instructions, press and holdthe menu key to switch between help and theapplication that is open in the background.TutorialThe tutorial provides you information about yourdevice and shows you how to use it.To access the tutorial in the menu, select Menu >Tools > Tutorial and open the section you want to view.Nokia PC SuiteYou can install Nokia PC Suite from the CD-ROM or fromthe Web. Nokia PC Suite can be used only with Windows2000 and Windows XP. With Nokia PC Suite, you canmake backups, synchronize your device with acompatible computer, move files between your deviceand a compatible computer, or use your device as amodem.17Your devicefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 17 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 17 Jun 26, 2006 9:34:16 AM
Calls and voice applicationsWhen the device is locked, calls still may be possible tothe official emergency number programmed into yourdevice.Make callsIn the offline profile, you may need to enter the lockcode and change the device to a calling profile beforemaking any call, including a call to an emergencynumber.To make and receive calls, the device must be switchedon, the device must have a valid SIM card installed, andyou must be located in a service area of the cellularnetwork.Enter the phone number, including the area code, andpress the call key. If you enter an incorrect character,press the clear key.Tip: For international calls, press the * keytwice to add the + character that replaces theinternational access code, and enter thecountry code, area code (omit the leading 0, ifnecessary), and phone number.To end the call or cancel the call attempt, press the endkey.To make a call using the saved contacts, selectContacts in the standby mode. Enter the first letters ofthe name, scroll to the name, and press the call key. See"Contacts," p. 26.Press the call key to view up to 20 numbers that you lastcalled or attempted to call. Scroll to the desired numberor name, and press the call key to dial the number. See"Log," p. 20.Use the volume keys to adjust the volume of an activecall.To call your voice mailbox (network service) in thestandby mode, press and hold 1; or press 1 and then thecall key.1-touch dial1-touch dialing allows you to make a call by pressingand holding a number key.Before using 1-touch dialing, select Menu > Tools >Settings > Call > 1-touch dialing > On.To assign a number key to a phone number, selectMenu > Tools > 1-touch dial. Scroll to the number key(2 - 9) on the screen, and select Options > Assign. Selectthe desired number from the Contacts directory.To delete the phone number assigned to a number key,scroll to the speed dialing key, and select Options >Remove.To modify a phone number assigned to a number key,scroll to the 1-touch dialing key, and select Options >Change.18Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 18 Jun 26, 2006 9:34:16 AM
Answer a callNote: The actual invoice for calls and servicesfrom your service provider may vary, depending onnetwork features, rounding off for billing, taxes, and soforth.To answer a call, press the call key.To decline the call, press the end key.To mute a ringing tone instead of answering a call,select Silence.To answer a new call during a call when the Callwaiting function is activated, press the call key. The firstcall is put on hold. To end the active call, press the endkey.Forward callsSelect Menu > Tools > Settings > Call forwarding.Forward incoming calls to your voice mailbox or toanother phone number. For details, contact your serviceprovider.1. Select a call type from the following:•Voice calls — Incoming voice calls.•Data calls — Incoming data calls.•Fax calls — Incoming fax calls.2. Select one of the following call forwarding options:•All voice calls, All data calls, or All faxcalls. — Forward all incoming voice, data andvideo, or fax calls.•If busy — Forward incoming calls when you havean active call.•If not answered — Forward incoming calls afteryour device rings for a specified period of time.Define the time you let the device ring beforeforwarding the call in the Delay time: field.•If out of reach — Forward calls when the deviceis switched off or out of network coverage.•If not available — Activate the last three settingsat the same time. This option forwards calls ifyour device is busy, not answered, or out ofreach.3. Select Activate.To check the current forwarding status, scroll to theforwarding option, and select Options > Check status.To stop forwarding voice calls, scroll to the forwardingoption, and select Options > Cancel.Call restriction and call forwarding cannot be active atthe same time.Call restrictionWhen calls are restricted, calls may be possible to theofficial emergency number programmed into yourdevice.Select Menu > Tools > Settings > Call restriction.You can restrict the calls that can be made or receivedwith the device (network service). To change thesettings, you need the restriction password from yourservice provider. Call restriction affects all calls,including data calls. Call restriction and call forwardingcannot be active at the same time.19Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 19 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 19 Jun 26, 2006 9:34:16 AM
To restrict calls, select Cellular call restriction, and selectfrom the following options:•Outgoing calls — Prevent making voice calls withyour device.•Incoming calls — Restrict incoming calls.•International calls — Prevent calling to foreigncountries or regions.•Incoming if roaming — Restrict incoming calls whenoutside your home country.•Intern. except home — Prevent calls to foreigncountries or regions, but to allow calls to your homecountry.To check the status of voice call restriction, scroll to therestriction option, and select Options > Check status.To stop all voice call restrictions, scroll to a restrictionoption, and select Options > Cancel all restrict..LogSelect Menu > Log.In the Log, you can view information about thecommunication history of the device.To view recent voice calls, their approximate duration,and packed data connections, select Recent calls, Calltimers, or Packet data; and press the joystick.To sort the events by type or direction, scroll right, andselect Options > Filter. Scroll to a filter type, and pressthe joystick. Select the type or direction, and press thejoystick.To specify when communication events are cleared,select Options > Settings > Log duration, an option, andOK.To clear missed and received calls and dialed numbers,select Recent calls > Options > Clear recent calls.Push to talkSelect Menu > Connect. > PTT.Push to talk (PTT) (network service) provides directvoice communication connected with the push of a key.With PTT, you can use your device as you would use awalkie-talkie.For more information, see the extended user guide onthe Web.Device securitySelect Menu > Tools > Settings > Security > Phone andSIM.You can modify the security settings for the PIN code,automatic lock, and SIM card change, and change codesand passwords.Avoid using codes that are similar to emergencynumbers to prevent accidental dialing of theemergency number.Codes are shown as asterisks. When you change a code,enter the current code, then the new code twice.20Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 20 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 20 Jun 26, 2006 9:34:16 AM
Define security settingsTo define device and SIM card, certificate management,and security module settings, select a setting andOptions > Open.When calls are limited to closed user groups, calls maybe possible to the official emergency numberprogrammed into your device.Define the following settings:•PIN code request — Select On to request that the PINcode is entered each time the device is switched on.This setting cannot be changed if the device isswitched off. Some SIM cards do not allow turningoff the PIN code request.•PIN code — Change the PIN code. The PIN code mustbe 4 to 8 numbers long. The PIN code protects yourSIM card against unauthorized use and is providedwith the SIM card. After three consecutive incorrectPIN code entries, the PIN code is blocked, and youneed to use the PUK code to unblock it before youcan use the SIM card again.•PIN2 code — Change the PIN2 code. The PIN2 codemust be 4 to 8 numbers long. The PIN2 code isrequired to access some functions of the device andis provided with the SIM card. After three consecutiveincorrect PIN2 code entries, the PIN2 code is blocked,and you need to use the PUK2 code to unblock itbefore you can use the SIM card again.•Autolock period — Set a time-out after which thedevice is automatically locked and can be used onlyif the correct lock code is entered. Enter a number forthe time-out in minutes, or select None to turn offthe autolock period. When the device is locked, youcan still answer incoming calls and calls may still bepossible to the official emergency numberprogrammed into your device.•Lock code — The new code can be 4-255 characterslong. Both alphabets and digits can be used, andboth uppercase and lowercase alphabets arepossible. The device notifies you if the lock code isnot properly formatted.•Lock if SIM changed — Set the device to ask for thelock code when an unknown, new SIM card isinserted into your device. The device maintains a listof SIM cards that are recognized as the owner’s cards.•Allow remote lock — If you set this option on, youcan lock the device by sending a predefined textmessage from another phone. When you set thisoption on, you need to enter the remote lockmessage and confirm the message. The messagemust be at least 5 characters long.•Closed user group (network service) — Specify agroup of people to whom you can call and who cancall you.•Confirm SIM services (network service) — Set thedevice to display confirmation messages when youare using a SIM card service.Change the restriction passwordTo change the password used for restricting voice, fax,and data calls, select Menu > Tools > Settings > Callrestriction > Cellular call restriction > Options > Editrestr. password. Enter the current code, then the newcode twice. The restriction password must be fourdigits long. For details, contact your service provider.21Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 21 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 21 Jun 26, 2006 9:34:16 AM
Fixed dialingWhen fixed dialing is activated, calls may be possible tothe official emergency number programmed into yourdevice.Select Menu > Contacts > Options > SIM contacts > Fixeddialing contacts.With the fixed dialing service, you can restrict calls fromyour device to only certain phone numbers. Not all SIMcards support the fixed dialing service. Contact yourservice provider for more information.Select Options, and select from the following options:•Activ. fixed dialing — Restrict calls from your device.To cancel the service, select Deact. fixed dialing. Youneed your PIN2 code to activate and deactivate fixeddialing or edit your fixed dialing contacts. Contactyour service provider if you do not have the code.•New SIM contact — Add a phone number to the listof numbers to which calls are allowed. Enter thecontact name and phone number. To restrict calls bya country prefix, enter the country prefix in New SIMcontact. All phone numbers to which calls areallowed must start with this country prefix.•Add from Contacts — Copy a contact from Contactsto your fixed dialing list.Tip: To send text messages to the SIM contactswhile the fixed dialing service is active, youneed to add the text message center numberto the fixed dialing list.To view or edit a phone number to which calls from yourdevice are allowed, select Options > SIM contacts >Fixed dialing contacts.To call the contact, press the call key.To edit the phone number, select Options > Edit. Youmay need your PIN2 code to edit your fixed dialingnumbers.To delete the contact, press the clear key.Voice mailboxSelect Menu > Tools > Voice mail.When you open the voice mailbox application for thefirst time, you are asked to enter the number of yourvoice mailbox. To change the number, select Options >Change number. To call the number, select Options >Call voice mailbox.Voice commandsSelect Menu > Tools > Voice cm..Use voice commands to make phone calls and to launchapplications, profiles, or other functions on the device.The device creates a voice tag for the entries in thecontacts list and for the functions designated in theVoice cm. application. When a voice command isspoken, the device compares the spoken words to thevoice tag in the device.Make a callThe voice tag for a contact is the name or nickname thatis saved on the contact card in Contacts. To listen to the22Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 22 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 22 Jun 26, 2006 9:34:16 AM
voice tag, open a contact card, and select Options >Playback.1. To make a call using a voice command, press andhold the voice key.2. When you hear the tone or see the visual display,clearly speak the name saved on the contact card.3. The device plays a synthesized voice tag for therecognized contact in the selected device language,and displays the name and number. After a timeoutof 1.5 seconds, the device dials the number. If therecognized contact was not correct, select Next toview a list of other matches or Quit to cancel dialing.Launch an applicationThe device creates voice tags for the applications listedin the Voice cm. application.To launch an application using a voice command, pressand hold the voice key, and clearly speak the voicecommand. If the recognized application was notcorrect, select Next to view a list of other matches orQuit to cancel.To add more applications to the list, select Options >New application.To change the voice command of an application, scrollto the application, and select Options > Changecommand. Type the new voice command, and selectOK.Change profilesThe device creates a voice tag for each profile. To set ona profile using a voice command, press and hold thevoice key, and say the name of the profile.To change the voice command, scroll to the desiredprofile, and select Profiles > Options > Changecommand.Voice command settingsTo switch off the synthesizer that plays recognizedvoice commands in the selected device language, selectSettings > Synthesizer > Off.To reset voice recognition learning when the main userof the device has changed, select Reset voice adapts..Voice aidSelect Menu > Tools > Voice aid.The voice aid application reads text on the screen,allowing you to use basic functions of your devicewithout looking at the display.Select from the following:•Contacts — Hear the entries in your contacts list. Donot use this option if you have more than 500contacts.•Recent calls — Hear information on your missed andreceived calls, dialed numbers, and frequent calls.•Voice mailbox — Retrieve and listen to your voicemessages.•Dialer — Dial a telephone number.23Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 23 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 23 Jun 26, 2006 9:34:16 AM
•Clock — Hear the current time and date.To hear more options, select Options.RecorderSelect Menu > Media > Recorder.With Recorder, you can record up to 60 seconds of avoice memo, save the voice recording as a sound clip,and play the sound clip. Recorder supports the AMRformat.Press the voice key to activate Recorder. If you havelogged in to push to talk, the voice key works as a pushto talk key and does not activate Recorder.To record a voice memo, select Options > Record soundclip. Select Pause to pause the recording and Record toresume recording . When you finish recording, selectStop. The sound clip is automatically saved.The maximum length of a voice recording is 60 seconds,but it also depends on the storage space available indevice memory or on a memory card.Play a voice recordingTo listen to a voice recording that you just recorder,select the play icon. ( ). Select Stop to cancel playback.The progress bar displays the playing time, position,and length of a voice recording.To pause playback of a voice recording, select Pause.Playback resumes when you select Play.Voice recordings that you receive or record aretemporary files. You must save the files that you wantto keep.Text to speechMsg. readerMsg. reader reads your received text messages aloud.Select Menu > Office > Msg. reader.Select the text message you want to be read, and selectPlay. You can also activate Msg. reader by pressing thecall key briefly when you receive a text message.To start reading the next message in your Inbox, scrollright. To start reading the previous message, scroll left.To pause the reading, press the call key briefly. Tocontinue, press the call key briefly again.To end the reading, press the end key.SpeechWith Speech you can set the language, voice and voiceproperties for Msg. reader.Select Menu > Tools > Speech.Voice propertiesTo edit the voice properties for the synthesized speech,select Menu > Tools > Speech > Voice settings.Select from the following options:24Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 24 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 24 Jun 26, 2006 9:34:16 AM
•Speed — Select the desired speech rate.•Volume — Set the volume level for the speech.Voice managementTo manage the voices available for the selectedlanguage, select Menu > Tools > Speech.Scroll to a voice, and select from the following options:•Play voice — Listen to the selected voice.•Voice details — View information about the voice.•Delete — Delete the selected voice.25Calls and voice applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 25 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 25 Jun 26, 2006 9:34:16 AM
ContactsSelect Menu > Contacts.Manage all of your contact information, such as phonenumbers and addresses. Add a personal ringing tone,voice tag, or a thumbnail image to a contact. Sendcontact information to compatible devices or receivecontact information as business cards from compatibledevices, and add them to your own list of contacts.To add a contact, select Options > New contact. Enterthe contact information, and select Done.To edit information in a contact card, scroll to thecontact, and select Options > Edit. Select from thefollowing options:•Add thumbnail — Add a thumbnail image that willdisplay when a contact calls you. The image must bepreviously saved to your device or memory card.•Remove thumbnail — Remove the image from thecontact card.•Add detail — Add fields of information to a contactcard, such as Job title.•Delete detail — Delete any details that you added toa contact card.•Edit label — Edit the field names of the contact card.Manage contact groupsCreate a contact group so that you can send text or e-mail messages to several recipients at the same time.1. Scroll to the right, and select Options > New group.2. Enter a name for the group or use the default name,and select OK.3. Open the group, and select Options > Addmembers.4. Scroll to each contact you want to add to the group,and press the joystick to mark it.5. Select OK to add all marked contacts to the group.The following options are available when you selectOptions in the contact groups view:•PTT options — Make a push to talk call either toan individual or to a group, or send a callbackrequest.•Open — Open the contact group and view thegroup members.•Create message — Send a message.•New group — Create a new contact group.•Delete — Delete a contact group.•Rename — Rename the contact group.•Ringing tone — Assign a ringing tone to a contactgroup.•Contacts info — View the information for acontact group.•Settings — Set the name display settings forcontact group members.26Contactsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 26 Jun 26, 2006 9:34:16 AM
Manage defaultinformationAssign a default number or address to a contact so youcan easily call or send a message to the default numberor address, even if several numbers or addresses aresaved to that contact.To change default information for a contact, open thecontact, and select Options > Defaults. Select thenumber or address you want to set as a default, andselect OK.The default number or address is underlined in thecontact.Copy contacts between SIMand device memoryFor availability and information on using SIM cardservices, contact your SIM card vendor. This may be theservice provider, network operator, or other vendor.To copy contacts from a SIM card to device memory,select Options > SIM contacts > SIM directory to openthe SIM directory. Mark the contacts you want to copy,or select Mark all to copy all contacts. Select Options >Copy to Contacts.To copy contacts from the device memory to a SIM card,select Options > Copy to SIM direct.. Mark the contactsyou want to copy, or select Mark all to copy all contacts.Select Options > Copy to SIM direct..Select Options > SIM contacts > SIM directory to see thenames and numbers stored on the SIM card. In SIMdirectory you can add, edit, or copy numbers toContacts, and you can make calls.Select ringing tones forcontactsSelect a ringing tone for a contact or contact group. Ifthe caller's phone number is sent with the call and yourdevice recognizes the number, the ringing tone playswhen the contact calls you.To select a ringing tone for a contact or contacts group,open the contact or contact group, and select Options >Ringing tone. A list of ringing tones opens. Select theringing tone you want to use, and select OK.To remove the ringing tone, select Default tone fromthe list of ringing tones.Business cardsSelect Menu > Contacts.You can send, receive, view, and save contact cards asbusiness cards in vCard or Nokia Compact Business Cardformat.You can send business cards to compatible devicesusing SMS, MMS, or e-mail, or an infrared or Bluetoothconnection.To send a business card, select the contact card fromthe contacts list, and select Options > Send. Select Via27Contactsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 27 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 27 Jun 26, 2006 9:34:16 AM
text message, Via multimedia, Via e-mail, ViaBluetooth, or Via infrared. Enter the phone number oraddress, or add a recipient from the contacts list. SelectOptions > Send. If you select SMS as the sending method,contact cards are sent without images.To view a received business card, select Open from thedisplayed notification, or open the message from theinbox folder in Messag..To save a business card, select Options > Save businesscard when the incoming message appears on thedevice.To save a received business card, select Options > Savebusiness card.To delete a received business card, select Options >Delete.28Contactsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 28 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 28 Jun 26, 2006 9:34:16 AM
CalendarSelect Menu > Calendar.In Calendar, you can create and view scheduled eventsand appointments. You can also set alarms for calendarentries.You can synchronize your calendar data with acompatible computer using Nokia PC Suite. Forinformation on synchronization, see the PC Suite guide.Create calendar entriesYou can create four types of calendar entries:•Meeting entries have a specific date and time.•Memo entries are related to the whole day but notto a specific time of the day. Memo entries do notappear in the weekly time schedule view.•Anniversary entries remind you of birthdays andspecial dates. They refer to a certain day but not aspecific time of the day. Anniversary entries arerepeated every year.•To-do note entries remind you of a task that has adue date but not a specific time of the day.To create a calendar entry, scroll to a date, and selectOptions > New entry. Select an entry type. Availablesettings for meeting, memo, anniversary, and to-doentries vary.To open and edit an existing entry, scroll to the entry,and select Options > Open. Edit the details in the variousfields.Tip: When you edit or delete a repeated entry,choose how you want the change to take effect.If you select All calendar entries deleted, allrepeated entries are deleted. If you selectDelete entry, only the current entry is deleted.To-doYou can create and maintain a task or list of tasks thatmust be done by a certain day. Each task can beassigned a due date, and an alarm.To open the list of to-do notes, select Options > To-dolist.To add a to-do note, select Options > New entry > To-do. Start to write the task in the Subject field. You canset a due date for the task, create an alarm for it, andspecify a priority. The priority icons are ( ! ) High and ( - )Low. There is no icon for Normal.To mark a task as completed, scroll to the task in the to-do list, and select Options > Mark as done.To restore a task, scroll to it in the todo list, and selectOptions > Mark as not done.29Calendarfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 29 Jun 26, 2006 9:34:16 AM
Calendar viewsTo switch between the different calendar views, selectOptions in any calendar view. Select a type of view fromthe list.To set the default calendar view, select Options >Settings > Default view > Month view , Week view, Dayview, or To-do view.To view a specific date in the calendar view, selectOptions > Go to date. Enter the date, and select OK.Add a received calendarentry to your calendarYou can receive a calendar entry as an attachment.To add a received calendar entry to your calendar, openthe calendar entry attachment in the message, andselect Options > Save to Calendar. The entry is added toyour default calendar.30Calendarfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 30 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 30 Jun 26, 2006 9:34:16 AM
MessagesSelect Menu > Messag..Before sending or receiving messages, you may need todo the following:•Insert a valid SIM card in the device and be locatedin a service area of the cellular network.•Verify that the network supports the messagingfeatures you want to use and that they are activatedon your SIM card.•Define Internet access point (IAP) settings on thedevice. See "Access points," p. 67.•Define e-mail account settings on the device. See "E-mail account settings," p. 41.•Define SMS settings on the device. See "Text messagesettings," p. 33.•Define MMS settings on the device. See "Multimediamessage settings," p. 36.The device may recognize the SIM card provider andautomatically configure some of the message settings.If not, you may need to define the settings manually, orcontact your service provider, network operator, orInternet service provider to configure the settings.The Messag. application displays each type ofmessaging folder in a list format with the newestmessage displayed first in each folder.Select one of the following:•New message — Create and send a new text,multimedia, or e-mail message.•Inbox — View received messages, except e-mailsand cell broadcast messages.•My folders — Create your own folders to storemessages and templates.•Mailbox — View and reply to received e-mail.•Drafts — Store messages that have not been sent.•Sent — Store messages that have been sent.•Outbox — View messages waiting to be sent.•Reports — View information about the delivery ofsent messages.Organize messagesTo create a new folder to organize your messages,select My folders > Options > New folder. Enter thefolder name, and select OK.To rename a folder, select the folder and Options >Rename folder. Enter the new folder name, and selectOK. You can only rename folders that you have created.To move a message to another folder, open themessage, and select Options > Move to folder, thefolder, and OK.To sort messages in a specific order, select Options >Sort by. You can sort the messages by Date, Sender,Subject, or Message type.31Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 31 Jun 26, 2006 9:34:16 AM
Messaging settingsSelect Options > Settings.To define or edit settings for different message types,select Text message, Multimedia message, E-mail,Service message, Cell broadcast, or Other.See "Text message settings," p. 33.See "Multimedia message settings," p. 36.See "E-mail account settings," p. 41.Other settingsSelect Menu > Messag. > Options > Settings > Other.Select from the following:•Save sent messages — Select whether to store sentmessages in the Sent folder.•No. of saved msgs. — Enter the number of sentmessages that you want to save. When the limit isreached, the oldest message is deleted.•Memory in use — Select where to save your receivedmessages. You can save messages to memory cardonly if a memory card is inserted.•Folder view — Define how you want the messagesin the inbox to be shown.The settings available for editing may vary.Text messagesYour device supports the sending of text messagesbeyond the character limit for a single message. Longermessages are sent as a series of two or more messages.Your service provider may charge accordingly.Characters that use accents or other marks, andcharacters from some language options like Chinese,take up more space limiting the number of charactersthat can be sent in a single message.Write and send text messagesSelect Menu > Messag. > New message > Textmessage.1. In the To field, press the joystick to select recipientsfrom Contacts, or enter the recipients' mobile phonenumbers manually. If you enter more than onenumber, separate the numbers with a semicolon. Toinsert a semicolon, press *.2. Enter the text of the message. To use a template,select Options > Insert > Template.3. Select Options > Send to send the message.Reply to received text messagesTo reply to a text message, open the message from theInbox. Select Options > Reply. Enter the text of themessage, and select Options > Send.To call the sender of a text message, open the messagefrom the Inbox, and select Options > Call.Text messages on the SIM cardText messages may be stored on your SIM card. Beforeyou can view SIM messages, you must copy the32Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 32 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 32 Jun 26, 2006 9:34:16 AM
messages to a folder in the device. After copying themessages to a folder, you can view them in the folderor delete them from the SIM card.Select Options > SIM messages.1. Select Options > Mark/Unmark > Mark or Mark all tomark every message.2. Select Options > Copy.3. Select a folder and OK to begin copying.To view SIM card messages, open the folder where youcopied the messages, and open a message.To delete a text message from the SIM card, select themessage, and press the clear key.Text message settingsSelect Options > Settings > Text msg..Define the following:•Message centers — View the available messagecenters for your device.•Msg. center in use — Select a message center to sendthe message.•Character encoding — Select Reduced support to useautomatic character conversion to anotherencoding system when available.•Receive report — Select Yes if you want that thenetwork sends you delivery reports on yourmessages (network service).•Message validity — Select how long the messagecenter resends your message if the first attempt fails(network service). If the recipient cannot be reachedwithin the validity period, the message is deletedfrom the message center.•Message sent as — Convert the message to anotherformat, such as Text, Fax, Paging or E-mail. Changethis option only if you are sure that your messagecenter is able to convert text messages into theseother formats. Contact your network operator.•Preferred conn. — Select the preferred method ofconnection when sending text messages from yourdevice.•Reply via same ctr. — Select whether you want thereply message to be sent using the same textmessage center number (network service).Picture messagesNote: Picture message function can be used onlyif it is supported by your network operator or serviceprovider. Only devices that offer picture messagefeatures can receive and display picture messages.Select Menu > Messag..To view a picture message, open the message from theInbox folder.Forward picture messagesCopyright protections may prevent some images,ringing tones, and other content from being copied,modified, transferred or forwarded.1. In the Inbox, open a picture message and selectOptions > Forward.33Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 33 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 33 Jun 26, 2006 9:34:16 AM
2. In the To field, enter a recipient's number, or pressthe joystick to add a recipient from Contacts. If youenter more than one number, separate the numberswith a semicolon. To insert a semicolon, press *.3. Enter the text of your message. The text can have120 characters. To use a template, select Options >Insert > Template.4. To send the message, press the call key.Tip: To remove the picture from the message,select Options > Remove picture.Multimedia messagesA multimedia message (MMS) can contain text andobjects such as images, sound clips, or video clips.Note: Only devices that have compatible featurescan receive and display multimedia messages. Theappearance of a message may vary depending on thereceiving device.Before you can send or receive multimedia messageson your device, you must define the multimediamessage settings. Your device may have recognized theSIM card provider and automatically configured themultimedia message settings. If not, contact yourservice provider. See "Multimedia messagesettings," p. 36.Create and send multimediamessagesThe default setting of the multimedia message serviceis generally on.Select New message > Multimedia message.Copyright protections may prevent some images, music(including ringing tones), and other content from beingcopied, modified, transferred or forwarded.1. In the To field, press the joystick to select recipientsfrom Contacts, or enter the recipients' mobile phonenumbers or e-mail addresses manually.2. In the Subject field, enter a subject for the message.To change the fields that are visible, select Options >Address fields.3. Enter the text of the message, and select Options >Insert object to add media objects. You can addobjects such as Image, Sound clip, or Video clip.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limit,the device may make it smaller so that it can be sentby MMS.4. Each slide of your message can contain only onevideo or audio clip. To add more slides to yourmessage, select Options > Insert new > Slide. Tochange the order of slides in your message, selectOptions > Move.5. To preview a multimedia message before sendingit, select Options > Preview.6. Press the joystick to send the multimedia message.34Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 34 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 34 Jun 26, 2006 9:34:16 AM
Create presentationsSelect New message > Multimedia message.1. In the To field, press the joystick to select recipientsfrom Contacts, or enter the recipients' mobile phonenumbers or e-mail addresses manually.2. Select Options > Create presentation and apresentation template.Tip: A template may define which mediaobjects you can include in the presentation,where they appear, and which effects aredisplayed between images and slides.3. Scroll to a text area and enter the text.4. To insert images, sound, video, or notes in yourpresentation, scroll to the corresponding objectarea, and select Options > Insert.Tip: To move between object areas, scrollup and down.5. To add slides, select Insert > New slide.6. Select Options and from the following:•Preview — See what your multimedia presentationlooks like when it is opened. Multimediapresentations may only be viewed in compatibledevices that support presentations. They mayappear different in different devices.•Backgrnd. settings — Select the background color forthe presentation and background images fordifferent slides.•Effect settings — Select effects between images orslides.Creating multimedia presentations is not possible ifMMS creation mode is Restricted. To change MMScreation mode, select Messag. > Options > Settings >Multimedia message.The available options may vary.To send your multimedia presentation, press the callkey.Tip: To save the message in Drafts withoutsending it, select Done.Receive and reply to multimediamessagesImportant: Multimedia message objects maycontain viruses or otherwise be harmful to your deviceor PC. Do not open any attachment if you are not sureof the trustworthiness of the sender.Before you can send or receive multimedia messageson your device, you must define the multimediamessage settings. Your device may have recognized theSIM card provider and automatically configured themultimedia message settings. If not, contact yourservice provider. See "Multimedia messagesettings," p. 36.If you receive multimedia messages containing objectsunsupported by your device, you cannot open them.1. To reply to a multimedia message, open themessage from the Inbox, and select Options >Reply.35Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 35 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 35 Jun 26, 2006 9:34:16 AM
2. Select Options > To sender to reply to the senderwith a multimedia message or Options > Via textmessage to reply to the sender with a text message.3. Enter the text of the message, and press the joystickto send it.View presentationsOpen the Inbox, scroll to a multimedia message thatcontains a presentation, and press the joystick. Scroll tothe presentation, and press the joystick.To pause the presentation, press either selection keybelow the display.After you pause the presentation or playing finishes,select Options and from the following:•Open link — Open a Web link and browse the Webpage.•Activate scrolling — Scroll text or images too largeto fit on the display.•Continue — Resume playing the presentation.•Play — Replay the presentation from the start.•Find — Find phone numbers and e-mail or Webaddresses the presentation may contain. You mayuse these numbers and addresses to make calls, sendmessages, or create bookmarks, for example.The available options may vary.View media objectsOpen the Inbox, scroll to a received multimediamessage and press the joystick. Select Options >Objects.To view or play a media object, scroll to it, and press thejoystick.Media objects and message attachments may containviruses or other harmful software. Do not open anyobjects or attachments unless you are sure of thetrustworthiness of the sender.To save a media object in its corresponding application,scroll to the object, select Options > Save.To send a media object to compatible devices, scroll toit, and select Options > Send.Tip: If you receive multimedia messages thatcontain media objects your device cannotopen, you may be able to send these objects toanother device such as a computer.Multimedia message settingsSelect Options > Settings > Multimedia message.Define the following settings:•Image size — Select Small or Large to scale imagesin multimedia messages. Select Original to maintainthe original image size of multimedia messages.•MMS creation mode — Select Restricted to have yourdevice prevent you from including content inmultimedia messages that may not be supported bythe network or the receiving device. To receivewarnings about including such content, selectGuided. To create a multimedia message with norestrictions on attachment type, select Free. If youselect Restricted, creating multimedia presentationsis not possible.36Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 36 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 36 Jun 26, 2006 9:34:16 AM
•Access point in use — Select the default access pointto connect to the multimedia message center. Youmay not be able to change the default access pointif it is preset in your device by your service provider.•Multimedia retrieval — Select Always automatic toalways receive multimedia messages automatically,Auto. in home network to receive notification of anew multimedia message that you can retrieve fromthe message center (for example, when you aretraveling abroad and are outside your homenetwork), Manual to retrieve multimedia messagesfrom the message center manually, or Off to preventreceipt of any multimedia messages.•Allow anon. msgs. — Select whether you want toreceive messages from unknown senders.•Receive ads — Select whether you want to receivemessages defined as advertisements.•Receive report — Select Yes to have the status of thesent message to be shown in the log (networkservice). Receiving a delivery report of a multimediamessage that has been sent to an e-mail addressmay not be possible.•Deny report sending — Select Yes to not senddelivery reports from your device for receivedmultimedia messages.•Message validity — Select how long the messagingcenter tries to send the message (network service).If the recipient of a message cannot be reachedwithin the validity period, the message is removedfrom the multimedia messaging center. Maximumtime is the maximum amount of time allowed by thenetwork.E-mail messagesTo receive and send mail, you must have a remotemailbox service. This service may be offered by anInternet service provider, a network service provider, oryour company. Your device is compliant with Internetstandards SMTP, IMAP4 (revision 1), and POP3, and withdifferent push e-mail solutions. Other e-mail providersmay offer services with different settings or featuresthan those described in this user guide. Contact your e-mail provider or service provider for more details.Before you can send, receive, retrieve, reply to, andforward mail on your device, you must also do thefollowing:•Configure an Internet access point (IAP). See "Accesspoints," p. 67.•Set up an e-mail account, and define the e-mailsettings correctly. See "E-mail accountsettings," p. 41.Follow the instructions from your remote mailbox andInternet service providers. Contact your network andInternet service providers or operator for the correctsettings.Set up your e-mailIf you select Mailbox and have not set up your e-mailaccount, you are prompted to do so. To start setting upthe e-mail account with the mailbox guide, select Yes.1. To start entering the e-mail settings, select Start.2. In Mailbox type, select IMAP4 or POP3, and selectNext.37Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 37 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 37 Jun 26, 2006 9:34:16 AM
Tip: POP3 is a version of the post officeprotocol that is used to store and retrievee-mail or Internet mail messages. IMAP4 isa version of the Internet message accessprotocol that lets you access and managee-mail messages while the messages arestill on the e-mail server. You can thenchoose which messages to download toyour device.3. In My e-mail address, enter your e-mail address. Toinsert @ or other special characters, press *. Toinsert a full stop, press 1. Select Next.4. In Incoming mail serv., enter the name of theremote server that receives your e-mail, and selectNext.5. In Outgoing mail serv., enter the name of the remoteserver that sends your e-mail, and select Next.Depending on your mobile operator, you mighthave to use your mobile operator's outgoing mailserver instead of your e-mail provider's.6. In Access point, select the Internet access point yourdevice should use when it retrieves the e-mails. Ifyou select Always ask, each time the device starts toretrieve e-mail, it asks which Internet access pointit should use, but if you select an access point, thedevice makes the connection automatically. SelectNext.7. Enter a name for your new mailbox, and selectFinish.When you create a new mailbox, the name you give tothe mailbox replaces Mailbox in the Messag. main view.You can have up to six mailboxes.Select your default mailboxIf you have defined several mailboxes, you can selectone of them as your default mailbox. To define thedefault mailbox, select Options > Settings > E-mail >Mailbox in use and the mailbox.If you have defined several mailboxes, you must selectthe mailbox that you want to use every time you startcomposing a new e-mail message.Connect to mailboxE-mail addressed to you is not automatically receivedby your device, but by your remote mailbox. To readyour e-mail, you must first connect to the remotemailbox; then select the e-mails you wish to retrieveinto your device. To receive and send e-mail, you needto register for an e-mail service. To set up a mailbox inyour device, select Messag. > Options > Settings > E-mail > Options > New mailbox. Contact your serviceprovider for the correct settings.To retrieve received e-mail messages to your device andview them offline, select your mailbox in the Messag.main view. When the device asks Connect to mailbox?,select Yes.To view e-mail messages in a folder, scroll to the folder,and press the joystick. Scroll to a message, and pressthe joystick.To retrieve e-mail messages to your device, selectOptions > Retrieve e-mail > New to retrieve newmessages that you have neither read nor retrieved,Selected to retrieve only messages you select from the38Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 38 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 38 Jun 26, 2006 9:34:16 AM
remote mailbox, or All to retrieve all messages notpreviously retrieved.To disconnect from a remote mailbox, select Options >Disconnect.View e-mail offlineWorking offline means that your device is notconnected to a remote mailbox. Managing your e-mailoffline enables you to save in connection costs and workin conditions that do not allow a data connection. Anychanges you make in the remote mailbox folders whileoffline take effect in your remote mailbox the next timeyou go online and synchronize. For example, if youdelete an e-mail from your device when offline, the e-mail is deleted from the remote mailbox the next timeyou connect to the mailbox.1. Select Messag. > Options > Settings > E-mail. Selectthe e-mail account, and press the joystick. SelectRetrieval settings > E-mail to retrieve > Msgs. &attachs. to retrieve entire messages with theirattachments to your device.2. Open your mailbox, and select Options > Retrieve e-mail. Select New to retrieve new messages that youhave neither read nor retrieved, Selected to retrieveonly messages you select from the remote mailbox,or All to retrieve all messages not previouslyretrieved. The device goes online and connects tothe mailbox to retrieve the mails.3. After retrieving the e-mails, select Options >Disconnect to return to the offline mode.4. To view an e-mail message, scroll to it, and press thejoystick.Some options require you to connect to your remotemailbox.Tip: To subscribe to other folders in yourremote mailbox, select E-mail settings >Retrieval settings > Folder subscriptions. E-mailin all subscribed folders is updated when youretrieve e-mail from your remote mailbox.Read and reply to e-mailImportant: E-mail messages may contain virusesor otherwise be harmful to your device or PC. Do notopen any attachment if you are not sure of thetrustworthiness of the sender.To read a received e-mail, scroll to the e-mail, and pressthe joystick.To open an attachment, select Options > Attachments.Scroll to the attachment, and press the joystick.To reply only to the sender of an e-mail, open the e-mail,and select Options > Reply > To sender.To reply to all recipients of an e-mail, open the e-mail,and select Options > Reply > To all.To delete an attachment from an e-mail that you aresending, select the attachment and Options >Attachments > Remove.Tip: If you reply to an e-mail that containsattached files, the attachments are notincluded in the reply. If you forward thereceived e-mail, attachments are included.39Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 39 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 39 Jun 26, 2006 9:34:16 AM
To set the message priority, select Options > Sendingoptions > Priority and from the available options.To call the sender of the e-mail, open the e-mail, andselect Options > Call.To reply to the sender of the e-mail with a text messageor multimedia message, open the e-mail, and selectOptions > Create message.To forward an e-mail, open the e-mail, and selectOptions > Forward.Delete messagesTo free up memory space on your device, regularlydelete messages from the Inbox and Sent folders, anddelete retrieved e-mail messages.To delete a message, scroll to it, and press the clear key.You can select to delete local e-mail messages on thedevice and keep the original on the server, or you candelete both the local e-mail messages on the device andthe original messages on the server.To delete e-mails from the device only, select Options >Delete > Phone only.To delete e-mail both from the device and from theremote server, open an e-mail, and select Options >Delete > Phone and server.E-mail foldersIf you create subfolders in your IMAP4 mailboxes on aremote server, you can view and manage these folderswith your device. You can only subscribe to folders inyour IMAP4 mailboxes. Subscribing to folders in aremote mailbox allows you to view those folders onyour device.To view folders in your IMAP4 mailbox, establish aconnection, and select Options > E-mail sett. > Retrievalsettings > Folder subscriptions.To view a remote folder, select a folder and Options >Subscribe. Every time you go online, the subscribedfolders are updated. This may take some time if thefolders are large.To update the list of folders, select a folder andOptions > Update folder list.Write and send e-mailTo write an e-mail, select Options > Add recipient toselect the recipients' e-mail addresses from thecontacts list, or enter the e-mail addresses in the Tofield. Use a semicolon to separate entries. Scroll down,and use the Cc field to copy other recipients, or theBcc field to blind copy recipients. In the Subject field,enter the subject of the e-mail. Enter your e-mailmessage in the text area, and select Options > Send.To attach a file to an e-mail, select Options > Insert.Select the attachment you want to add. For example,you can insert images, sound clips, notes and other filessuch as office files.To set the sending time for an e-mail message, selectOptions > Sending options > Send message. SelectImmediately or During next conn. if you are workingoffline.40Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 40 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 40 Jun 26, 2006 9:34:16 AM
E-mail messages are stored in the Outbox beforesending. Unless the e-mail is sent immediately, you canopen the Outbox and suspend and resume sending orview the e-mail.E-mail account settingsSelect Menu > Messag. > Options > Settings > E-mail.The settings available for editing may vary. Somesettings may be preset by your service provider.If you try to edit mailbox settings but have not set upan e-mail account, the mailbox guide opens and helpsyou set up your e-mail account.Settings for the received e-mailSelect Incoming e-mail and from the following settings:•User name — Enter the user name for the e-mailservice.•Password — Enter the password for the e-mailservice.•Incoming mail serv. — Enter the IP address or hostname of the server that receives your e-mail.•Access point in use — Select the Internet access pointthat the device uses for retrieving the e-mailmessages that you receive.•Default mailbox — Enter a name for the mailbox.•Mailbox type — Select the mailbox protocol that yourremote mailbox service provider recommends. Theoptions are POP3 and IMAP4. This setting can beselected only once and cannot be changed if youhave saved or exited from the mailbox settings. Ifyou use the POP3 protocol, e-mail messages are notupdated automatically when you are online. To seethe latest e-mail messages, you must disconnect andmake a new connection to your mailbox.•Security (ports) — Select the security option used toincrease the security of the connection.•Port — Define a port for connection.•APOP secure login (for POP3 only) — Use with thePOP3 protocol to encrypt the sending of passwordsto the remote e-mail server while connecting to themailbox.Settings for sent e-mailSelect Outgoing e-mail and from the following settings:•My e-mail address — Enter the e-mail address givento you by your service provider. Replies to yourmessages are sent to this address.•User name — Enter the user name for the e-mailservice.•Password — Enter the password for the e-mailservice.•Outgoing mail serv. — Enter the IP address or hostname of the mail server that sends your e-mail. Youmay only be able to use the outgoing server of yournetwork operator. Contact your service provider formore information.•Access point in use — Select the Internet access pointthat the device uses for sending the e-mail messagesthat you send.•Security (ports) — Select the security option used tosecure the connection to the remote mailbox.•Port — Define a port for connection.User settingsSelect User settings and from the following settings:41Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 41 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 41 Jun 26, 2006 9:34:16 AM
•My name — Enter a name to appear before your e-mail address when you send e-mail.•Reply-to — Select whether you want replies to beredirected to a different address. Select On, and enterthe e-mail address to which you want to direct thereplies. You can only enter one address to whichreplies are directed.•Delete e-mails from — Select whether you want todelete the e-mails only from the device or from boththe device and the server. Select Always ask if youwant to confirm from where the e-mail should bedeleted every time you delete an e-mail.•Send message — Select to send the e-mail as soonas possible, to send it the next time you retrieve e-mail, or to store the e-mail in the Outbox, from whereyou can send it later.•Send copy to self — Select whether you want to savea copy of the e-mail to your remote mailbox and tothe address defined in My e-mail address in thesettings for Outgoing e-mail.•Include signature — Select whether you want toattach a signature to your e-mail messages.•New e-mail alerts — Select whether you want toreceive the new e-mail indications, a tone and anote, when new mail is received to the mailbox.•Default encoding — Select the preferred method forcharacter encoding.Retrieval settingsSelect Retrieval settings and from the followingsettings:•E-mail to retrieve (for POP3 mailboxes only) — Selectwhether you want to retrieve only the e-mail headerinformation such as sender, subject and date, e-mail,or e-mail with attachments.•Retrieval amount — Select the number of e-mailsyou want to retrieve from the remote server to yourmailbox.•IMAP4 folder path (for IMAP4 mailboxesonly) — Define the folder path for folders to besubscribed.•Folder subscriptions (for IMAP4 mailboxesonly) — Subscribe to other folders in the remotemailbox and retrieve content from those folders.Automatic retrieval settingsSelect Automatic retrieval and from the followingsettings:•Header retrieval — Select whether you want toreceive notifications when new e-mail is received inyour remote mailbox. Select Always enabled toalways automatically retrieve new e-mail messagesfrom your remote mailbox, or Only in home net. toautomatically retrieve new e-mail messages fromyour remote mailbox only when you are in yourhome network and not, for example, traveling.•Retrieval days — Select the days on which e-mailsare retrieved to your device.•Retrieval hours — Define the hours between whichthe e-mails are retrieved.•Retrieval interval — Select the time interval betweenretrieving new e-mails.Instant messagingSelect Menu > Connect. > IM.42Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 42 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 42 Jun 26, 2006 9:34:16 AM
Instant messaging (IM) (network service) allows you toconverse with other people using instant messages andjoin discussion forums (IM groups) with specific topics.Various service providers maintain IM servers that youcan log in to after you register to an IM service. Serviceproviders may differ in their support of features.If IM is not available from your wireless service provider,it may not appear in the menu of your device. Contactyour service provider for more information aboutsigning up for IM services and costs for services. Formore information on the availability of IM settings,contact your network operator, service provider, ordealer.For additional instructions, see the extended user guideon the Web.Special messagesYour device can receive many kinds of messages thatcontain data:•Operator logo — To save the logo, select Options >Save.•Ringing tone — To save a ring tone, select Options >Save.•Configuration message — You may receive settingsfrom your network operator, service provider, orcompany information management department ina configuration message. To accept the settings,open the message, and select Options > Save all.•E-mail notification — The note tells you how manynew e-mails you have in your remote mailbox. Anextended notification may list more detailedinformation.Send service commandsSend a service request message to your service providerand request activation for certain network services.To send a service request to your service provider, selectOptions > Service command. Enter the service requestas a text message, and select Options > Send.43Messagesfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 43 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 43 Jun 26, 2006 9:34:16 AM
Team suiteCreate, edit, and delete teams, and send messages, viewteam Web pages, and make phone calls to teams at onego.Select Menu > Office > Team suite.To create a new team, select Options > Team > Create.To select from the actions, first select a team on the left,then move to the action pane on the right, and selectfrom the following actions:•Call — Make a phone call to the team. The teammembers are called one by one and put on hold untilthe calls can be merged into a conference call(network service). The maximum number ofparticipants depends on the network service.•Create message — Send a short message, amultimedia message, or an e-mail message to theselected team.•Call conference service — Start a call to theconference call service (network service) defined forthe selected team.•Push to talk — Communicate via push to talk(network service) with the selected team.•Team Web pages — Open the bookmark folder thathas been for the selected team's Web pages.To find more actions, select Options > ActionsTeam suite settingsTo edit Team suite settings, select Options > Settings.Select from the following options:•Action bar items — Define which actions are shownin the action pane and in which order.•Own business card — Define your own contact cardor select not to use your own contact card in theteam communication.•View contact image — Select whether you want tosee the team members' pictures.•Plug-in settings — Define plug-in settings. You canaccess this setting only if there are plug-ins availablethat you can configure.44Team suitefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 44 Jun 26, 2006 9:34:16 AM
Office applicationsSelect Menu > Office.Some office applications may not be available in alllanguages.Opening a large file may not be possible or it may takea while.NotesSelect Menu > Office > Notes.You can create and send notes to other compatibledevices, and save plain text files (.txt format) that youreceive to Notes.To write a new note, select Options > New note, writethe text and press Done.CalculatorNote: This calculator has limited accuracy and isdesigned for simple calculations.Select Menu > Office > Calculator.To make a calculation, enter the first number of thecalculation. Scroll to and select a function such as addor subtract from the function map. Enter the secondnumber of the calculation, and select =. To add adecimal point, press #.The calculator performs operations in the order they areentered. The result of the calculation remains in theeditor field and can be used as the first number of a newcalculation.To save the results of a calculation, select Options >Memory > Save. The saved result replaces the previouslystored number in memory.To retrieve the results of a calculation from memory anduse them in a calculation, select Options > Memory >Recall.To view the last saved result, select Options > Lastresult.Exiting the calculator application or turning off thedevice does not clear the memory. You can recall thelast saved result the next time you open the calculatorapplication.ConverterSelect Menu > Office > Converter.The converter has limited accuracy, and rounding errorsmay occur.Convert measurements1. Scroll to the Type field, and select Options >Conversion type to open a list of measures. Scroll tothe measure you want to use, and select OK.45Office applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 45 Jun 26, 2006 9:34:16 AM
2. Scroll to the first Unit field, and select Options >Select unit. Select the unit from which you want toconvert, and select OK. Scroll to the next Unit field,and select the unit to which you want to convert.3. Scroll to the first Amount field, and enter the valueyou want to convert. The other Amount fieldchanges automatically to show the converted value.Press # to add a decimal and * for + and - (fortemperature), and E (exponent) symbols.Set base currency and exchangerateNote: When you change base currency, you mustenter new exchange rates because all previously setexchange rates are cleared.Before you can make currency conversions, you mustchoose a base currency and add exchange rates. Therate of the base currency is always 1. The base currencydetermines the conversion rates of the othercurrencies.1. To set the rate of exchange for the unit of currency,scroll to the Type field, and select Options > Currencyrates.2. A list of currencies opens, and you can see thecurrent base currency at the top. Scroll to thecurrency type and enter the exchange rate youwould like to set per single unit of currency.3. To change the base currency, scroll to the currency,and select Options > Set as base curr..4. Select Done > Yes to save the changes.After you have inserted all the necessary exchangerates, you can make currency conversions.File managerWith File mgr., you can manage the contents andproperties of files and folders. You can open, create,move, copy, rename, and search for files and folders.Copyright protection may prevent sending some files.QuickofficeTo use the Quickoffice applications, select Menu >Office > Quickoffice. A list of files in the .doc, .xsl, .ppt,and .txt file formats saved in your device memory or thememory card opens.To open a file in its respective application, press thejoystick.To sort files, select Options > Sort files.To open Quickword, Quicksheet, or Quickpoint, scroll tothe desired tab with the joystick.Not all file formats or features are supported.QuickwordWith Quickword, you can view Microsoft Worddocuments on the display of your device. Quickwordsupports colors, bold, and underline.Quickword supports the viewing of documents savedin .doc format in Microsoft Word 97, 2000, and XP. Not46Office applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 46 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 46 Jun 26, 2006 9:34:16 AM
all variations or features of the mentioned file formatsare supported.To move in the document, use the joystick.To search the document for text, select Options >Search.You can also select Options and from the following:•Go to — Move to the start, end, or selected positionwithin the document.•Zoom — Zoom in or out.•Start Autoscroll — Start automatic scrolling throughthe document. To stop scrolling, select Options >Stop Autoscroll.QuicksheetWith Quicksheet, you can read Microsoft Excel files onthe display of your device.Quicksheet supports the viewing of spreadsheet filessaved in .xls format in Microsoft Excel 97, 2000, 2003,and XP. Not all variations or features of the mentionedfile formats are supported.To move around in the spreadsheet, use the joystick.To switch between worksheets, select Options >Worksheet.To search the spreadsheet for a text, value, or formula,select Options > Find.To change how the spreadsheet is displayed, selectOptions and from the following:•Pan — Navigate within the current worksheet byblocks. A block contains columns and rows displayedby a screen. To display the columns and rows, scrollto a block and select OK.•Resize — Adjust the size of columns or rows.•Zoom — Zoom in or out•Freeze panes — Keep the selected row, column, orboth visible while you move in the spreadsheet.QuickpointWith Quickpoint, you can view Microsoft PowerPointpresentations on the display of your device.Quickpoint supports the viewing of presentationscreated in .ppt format in Microsoft PowerPoint 97, 2000,and XP. Not all variations or features of the mentionedfile formats are supported.To move between the slide, outline, and the notes view,scroll to the desired tab with the joystick.To move to the next or previous slide in thepresentation, scroll up or down with the joystick.To view the presentation in full screen, select Options >Full screen.To expand items in the presentation in the outline view,select Options > Expand entry.PDF readerSelect Menu > Office.With PDF reader you can read PDF documents on thedisplay of your device; search for text in the documents;modify settings, such as zoom levels and page views;and send PDF files using e-mail.47Office applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 47 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 47 Jun 26, 2006 9:34:16 AM
Zip managerSelect Menu > Office.With Zip manager, you can create new archive files tostore compressed ZIP formatted files; add single ormultiple compressed files or directories to an archive;set, clear, or change the archive password for protectedarchives; and change settings, such as compressionlevel, temporary file drive, file name encoding, defaultdrive, and default start-up view.You can store the archive files on the device memory oron a memory card.ClockSelect Menu > Clock.To set an alarm, select Options > Set alarm. Enter thealarm time, and select OK.When an alarm is active, is shown.To turn off the alarm, select Stop, or to stop the alarmfor 5 minutes, select Snooze. If the alarm time is reachedwhile the device is switched off, the device switchesitself on and starts sounding the alarm tone. If youselect Stop, the device asks whether you want toactivate the device for calls. Select No to switch off thedevice or Yes to make and receive calls. Do not selectYes when wireless phone use may cause interferenceor danger.To change the alarm time, select Options > Resetalarm.To remove an alarm, select Options > Remove alarm.Clock settingsTo change the clock settings, select Options > Settings.To change the time or date, select Time or Date.To change the clock shown in the standby modes, selectClock type > Analog or Digital.To allow the mobile phone network to update the time,date, and time zone information to your device(network service), select Network operator time > Auto-update.To change the alarm tone, select Clock alarm tone.World clockSelect Menu > Clock, and scroll right. In the world clockview, you can view the time in different cities.To add a city to the world clock view, select Options >Add city.To change the city that determines the time and datein your device, select Options > My current city. The cityis displayed in the clock main view, and the time in yourdevice is changed according to the city selected. Checkthat the time is correct and matches your time zone.To remove a city from the list, scroll to the city, and pressthe clear key.48Office applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 48 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 48 Jun 26, 2006 9:34:16 AM
ConnectivityCopyright protections may prevent some images, music(including ringing tones), and other content from beingcopied, modified, transferred or forwarded.Your device offers several options to connect to theInternet, a corporate intranet, or to another device orPC. Your device supports a wired solution with a USB(Universal Serial Bus) cable connection for Nokia PCSuite. Your device also allows you to communicateusing push to talk, instant messaging (chat), andmodem-based connections.Internet access pointsAn access point is where your device connects to anetwork. To use e-mail and multimedia services or toconnect to the Internet and browse web pages, youmust first define Internet access points for theseservices. You may need to set up several Internet accesspoints, depending on the sites you want to access. Forexample, browsing the Web may require one accesspoint, and accessing your company intranet mayrequire another. To connect to the Internet over GPRS,your device may have predefined, default Internetaccess point settings.When you switch on your device for the first time, theaccess points may be configured automatically basedon the service provider information in your SIM card.You can also receive the access points settings in amessage from your service provider. This might reducethe number of settings you need to enter yourself.The available options may vary. Some or all accesspoints may be preset for your device by your serviceprovider. You may not be able to add, edit, or deleteaccess points.Contact your service provider and e-mail serviceprovider for more information on access points andtheir settings.See "Connection settings," p. 67.Set up an Internet access point forpacket data (GPRS)1. Select Menu > Tools > Settings > Connection > Accesspoints.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.•Connection name — Enter a descriptive name forthe connection.•Data bearer — Select Packet data.•Access point name — Enter the name for theaccess point. The name is usually provided byyour service provider or network operator.49Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 49 Jun 26, 2006 9:34:16 AM
•User name — Enter your user name if requiredby the service provider. User names are oftencase-sensitive and provided by your serviceprovider.•Prompt password — Select Yes to enter yourpassword each time you log into a server or Noto save the password in your device memory andautomate the login.•Password — Enter your password if required bythe service provider. The password is often case-sensitive provided by the service provider.•Authentication — Select Secure to always sendyour password encrypted or Normal to send yourpassword encrypted when possible.•Homepage — Enter the Web address of the pageyou want to display as a home page when youuse this access point.4. After defining the settings, select Options >Advanced settings to define the advanced settingsor Back to save the settings and exit.For information on the advanced settings, see theextended user guide on the Web.Cable connectionInstall the USB data cable driver to your PC before youuse a cable connection. You can use the Data transferwithout installing the USB data cable drivers.Select Menu > Connect. > Data cbl..Using a USB data cable, you can connect your device toa compatible PC . Connect the USB data cable to thebottom of the device. To change the device type younormally connect to your device with the data cable,press the joystick.Select from the following:•Ask on connection — Select whether you want to beasked for the device type every time you connect thedata cable to your device.•PC Suite — Connect the PC Suite to your device withthe data cable, and use your device as a modem.•Data transfer — Access and transfer data such asmusic or image files from your computer using thedata cable connection. To use the Data transfermode, make sure that you have not selected USB asa connection type in the Manage connectionssettings in Nokia PC Suite. Insert a memory card toyour device, connect the device to a compatiblecomputer with the USB data cable, and select Datatransfer when the device asks which mode is used.In this mode, your device acts as a mass storagedevice and you can see it as a removable hard drivein your computer. The device will switch into theOffline profile if this is selected. End the connectionfrom the PC (for example, from an Unplug or EjectHardware wizard in Windows) to avoid damagingthe memory card. After you end the connection, thedevice returns to the profile in which it was beforeusing the data transfer mode.To save your selection, select Back.BluetoothThis device is compliant with Bluetooth Specification2.0 supporting the following profiles: Dial-upNetworking Profile, Object Push Profile, File Transfer50Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 50 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 50 Jun 26, 2006 9:34:16 AM
Profile, Handsfree Profile, Headset Profile, BasicImaging Profile and SIM Access Profile. To ensureinteroperability between other devices supportingBluetooth technology, use Nokia approvedenhancements for this model. Check with themanufacturers of other devices to determine theircompatibility with this device.Bluetooth technology enables wireless connectionsbetween electronic devices within a range of 10 meters(33 feet). A Bluetooth connection can be used to sendimages, videos, texts, business cards, calendar notes, orto connect wirelessly to devices using Bluetoothtechnology, such as computers.Since devices using Bluetooth technologycommunicate using radio waves, your device and theother devices do not need to be in direct line-of-sight.The two devices only need to be within a maximum of10 meters of each other, although the connection canbe subject to interference from obstructions such aswalls or from other electronic devices.Start using BluetoothThere may be restrictions on using Bluetoothtechnology in some locations. Check with your localauthorities or service provider.Features using Bluetooth technology, or allowing suchfeatures to run in the background while using otherfeatures, increase the demand on battery power andreduces the battery life.Select Menu > Connect. > Bluetooth.1. When you activate Bluetooth for the first time, youare asked to give a name to your device. Give yourdevice a unique name to make it easy to recognizeif there are several Bluetooth devices in the vicinity.2. Select Bluetooth > On.3. Select My phone's visibility > Shown to all.Your device and the name you entered can now be seenby other users with devices using Bluetoothtechnology.SettingsDefine the following settings:•Bluetooth — Select On to be able to connect toanother compatible device using Bluetoothconnectivity.•My phone's visibility — Select Shown to all to allowother devices using Bluetooth technology to findyour device when you have set Bluetooth > On. Toprevent other devices from finding your device,select Hidden. Even if you select Hidden, paireddevices can still detect your device.•My phone's name — Enter a name for your device.The name is visible to other devices that search fordevices using Bluetooth technology. The maximumlength of the name is 30 characters.•Remote SIM mode — Select On to enable anotherdevice, such as a compatible car kit enhancement, touse the SIM card in your device to connect to thenetwork. See "SIM access profile," p. 53.If Bluetooth was turned off as a result of enteringOffline profile, you must re-enable Bluetooth manually.51Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 51 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 51 Jun 26, 2006 9:34:16 AM
Security tipsWhen you are not using Bluetooth connectivity, selectBluetooth > Off or My phone's visibility > Hidden.Do not pair with an unknown device.Send dataSeveral Bluetooth connections can be active at a time.For example, if you are connected to a headset, you canalso transfer files to another compatible device at thesame time.1. Open the application where the item you want tosend is stored.2. Select the item, and select Options > Send > ViaBluetooth. The device searches for other devicesusing Bluetooth technology within range and liststhem.Tip: If you have sent data using Bluetoothbefore, a list of the previous search resultsis displayed. To search for more Bluetoothdevices, select More devices.3. Select the device with which you want to connect,and press the joystick to set up the connection. Ifthe other device requires pairing before data can betransmitted, you are asked to enter a passcode.4. When the connection has been established, Sendingdata is shown.The Sent folder in Messag. does not store messages sentusing Bluetooth connectivity.Bluetooth connectivity indicators Bluetooth is active. When the icon is blinking, your device is trying toconnect to the other device. When the icon is showncontinuously, the Bluetooth connection is active.Pair devicesSelect Menu > Connect. > Bluetooth, and scroll right toopen the Paired devices page.Before pairing, create your own passcode (1-16 digits),and agree with the user of the other device to use thesame code. Devices that do not have a user interfacehave a fixed passcode. You need the passcode onlywhen you connect the devices for the first time. Afterpairing, it is possible to authorize the connection. See"Authorize a device," p. 53. Pairing and authorizingthe connection makes connecting quicker and easier,as you do not have to accept a connection betweenpaired devices every time you establish the connection.The passcode for remote SIM access must have 16 digits.1. Select Options > New paired device. The devicestarts to search for Bluetooth devices within range.Tip: If you have sent data using Bluetoothbefore, a list of the previous search resultsis displayed. To search for more Bluetoothdevices, select More devices.2. Select the device with which you want to pair, andenter the passcode. The same passcode must beentered to the other device as well.52Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 52 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 52 Jun 26, 2006 9:34:16 AM
3. Select Yes to make the connection between yourdevice and the other device automatic or No toconfirm the connection manually every time aconnection attempt is made. After pairing, thedevice is saved to the paired devices page.To give a nickname to a paired device that is onlydisplayed in your device, scroll to the device with whichyou have paired, and select Options > Assign shortname.To delete a pairing, select the device whose pairing youwant to delete and Options > Delete. To delete allpairings, select Options > Delete all.Tip: If you are currently connected to a deviceand cancel the pairing with that device, pairingis removed immediately, and the connection isswitched off.Authorize a deviceIf you trust a paired device, you can allow it to connectautomatically to your device. You can select from thefollowing options:•Set as authorized — Connections between yourdevice and the other device can be made withoutyour knowledge. No separate acceptance orauthorization is needed. Use this status for your owndevices, such as your compatible headset or PC, ordevices that belong to someone you trust.•Set as unauthorized — Connection requests from theother device must be accepted separately everytime.Receive dataIf you want to receive data using Bluetooth, selectBluetooth > On and My phone's visibility > Shown toall. When you receive data through Bluetoothconnectivity, a tone sounds, and you are asked if youwant to accept the message. If you accept, the messageis placed in the Inbox folder in Messag.Tip: You can access the files in the device or onthe memory card using a compatible accessorythat supports the File Transfer Profile Clientservice (for example, a laptop computer).SIM access profileWhen the wireless device is in the remote SIM mode,you can only use a compatible connected enhancement,such as a car kit, to make or receive calls. Your wirelessdevice will not make any calls, except to the emergencynumbers programmed into your device, while in thismode. To make calls from your device, you must firstleave the remote SIM mode. If the device has beenlocked, enter the code to unlock it first.With the SIM access profile, you can access the SIM cardof your device from a compatible car kit device. Thisway, you do not need a separate SIM card to access SIMcard data and connect to the GSM network.To use the SIM access profile, you need the following:•Compatible car kit device that supports Bluetoothwireless technology•Valid SIM card in your device53Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 53 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 53 Jun 26, 2006 9:34:16 AM
For more information about car kit devices andcompatibility with your device, see www.nokia.comand your car kit user guide.Manage the SIM access profile1. Select Menu > Connect. > Bluetooth to activateBluetooth connectivity in your device.2. To enable remote SIM access, scroll to Remote SIMmode, and press the joystick.3. Activate Bluetooth in the car kit device.4. Use your car kit device to start a search forcompatible devices. For instructions, see the userguide of your car kit device.5. Select your device from the list of compatibledevices.6. To pair the devices, enter the Bluetooth passcodeshown on the display of the car kit device to yourdevice.7. Authorize the car kit device. Select Menu >Connect. > Bluetooth, and scroll to the Paireddevices page. Scroll to the car kit device, and enterthe Bluetooth passcode. When the device asks tomake the connection automatic, select Yes.Connections between your device and the car kitdevice can be made without separate acceptance orauthorization. If you select No, connection requestsfrom this device must be accepted separately everytime.Tip: If you have already accessed the SIM cardfrom the car kit with the active user profile, thecar kit searches automatically for a device withthe SIM card. If it finds your device, andautomatic authorization is activated, the cardevice automatically connects to the GSMnetwork when you switch on the car ignition.When you activate the remote SIM access profile, youcan use applications on your device that do not neednetwork or SIM services.To end the remote SIM access connection from yourdevice, select Menu > Connect. > Bluetooth > RemoteSIM mode > Off.InfraredDo not point the IR (infrared) beam at anyone's eye orallow it to interfere with other IR devices. This device isa Class 1 laser product.Use infrared to connect two devices and transfer databetween them. With infrared, you can transfer datasuch as business cards, calendar notes, and media fileswith a compatible device.Send and receive data1. Ensure that the infrared ports of the devices faceeach other. The positioning of the devices is moreimportant than angle or distance.2. Select Menu > Connect. > Infrared, and press thejoystick to turn on infrared on your device. Turn oninfrared on the other device.3. Wait a few seconds until an infrared connection isestablished.4. To send, locate the desired file in an application orthe file manager, and select Options > Send > Viainfrared.54Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 54 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 54 Jun 26, 2006 9:34:16 AM
If data transfer is not started within 1 minute after theactivation of the infrared port, the connection iscancelled and must be started again.All items received through infrared are placed in theInbox folder in Messag..Positioning devices away from each other breaks aconnection, but the infrared light beam remains activeon your device until it is deactivated.Data connectionsPacket dataGPRS (general packet radio service) enables wirelessaccess for mobile phones to data networks (networkservice). GPRS uses packet data technology whereinformation is sent in short bursts of data over themobile network. The benefit of sending data in packetsis that the network is occupied only when sending orreceiving data. As GPRS uses the network efficiently, itallows for quick data connection set-up and fast datatransmission speeds.You must subscribe to the GPRS service. For availabilityand subscription to GPRS, contact your networkoperator or service provider.Enhanced GPRS (EGPRS) is similar to GPRS, but it enablesfaster connection. For more information on theavailability of EGPRS and data transfer speed, contactyour network operator or service provider. Note thatwhen you have selected GPRS as a data bearer, thedevice uses EGPRS instead of GPRS if this is available inthe network.During a voice call, you cannot establish a GPRSconnection, and any existing GPRS connection is put onhold unless the network supports dual transfer mode.Connection managerSelect Menu > Connect. > Conn. mgr..To view the status of data connections or endconnections, select Act. data conn..View and end active connectionsNote: The actual time invoiced for calls by yourservice provider may vary, depending on networkfeatures, rounding off for billing, and so forth.In the active connections view, you can see the opendata connections.To view detailed information about networkconnections, select the connection from the list andOptions > Details. The type of information showndepends on the connection type.To end a network connection, select the connectionfrom the list and Options > Disconnect.To end all active network connections simultaneously,select Options > Disconnect all.To view the details of a network, press the joystick.55Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 55 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 55 Jun 26, 2006 9:34:16 AM
ModemSelect Menu > Connect. > Modem.Together with a compatible computer, you can use yourdevice as a modem to connect to the Web.Before you can use your device as a modem•You need the appropriate data communicationssoftware on your computer.•You must subscribe to the appropriate networkservices from your service provider or Internetservice provider.•You must have the appropriate drivers installed onyour computer. You must install drivers for yourcable connection, and you may need to install orupdate Bluetooth or infrared drivers.To connect the device to a compatible computer usinginfrared, press the joystick. Make sure the infrared portsof the device and computer are directly facing eachother with no obstacles between them.To connect your device to a computer using Bluetoothwireless technology, initiate the connection from thecomputer. To activate Bluetooth in your device, selectMenu > Connect. > Bluetooth and select Bluetooth >On.If you use a cable to connect your device to a computer,initiate the connection from the computer.Note that you may not be able to use some of the othercommunication features when the device is used as amodem.Mobile VPNSelect Menu > Tools > Settings > Connection > VPN.The Nokia mobile virtual private network (VPN) clientcreates a secure connection to compatible corporateIntranet and services, such as e-mail. Your deviceconnects from a mobile network, through the Internet,to a corporate VPN gateway that acts as a front door tothe compatible corporate network. VPN client uses IPSecurity (IPSec) technology. IPSec is a framework ofopen standards for supporting secure exchange of dataover IP networks.VPN policies define the method used by VPN client anda VPN gateway to authenticate each other, and theencryption algorithms that they use to help protect theconfidentiality of data. Contact your corporation for aVPN policy.To use VPN with an application, the application must beassociated with a VPN access point. A VPN access pointis made up of an Internet access point and a VPN policy.To manage VPN, select VPN management > Options >Open and from the following options:•VPN policy — Install, view, and update VPN policies.•VPN policy servers — Edit the connection settings ofVPN policy servers from which you can install andupdate VPN policies.•VPN log — View the log for your VPN policyinstallations, updates and synchronizations, andother VPN connections.56Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 56 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 56 Jun 26, 2006 9:34:16 AM
Data synchronizationMenu > Connectivity > Sync.Use Sync to synchronize your contacts, calendar, notes,or mailboxes with corresponding applications on acompatible computer or remote Internet server. Yoursynchronization settings are saved in a synchronizationprofile. The application uses SyncML technology forremote synchronization. For information on SyncMLcompatibility, contact the supplier of the applicationswith which you want to synchronize your device.The available applications you can synchronize mayvary. Contact your service provider for moreinformation.Tip: You may receive the synchronizationsettings as a message from your serviceprovider.Create a synchronization profileTo create a profile, select Options > New sync profileand select from the following options:•Sync profile name — Enter a name for the profile.•Applications — Select the applications tosynchronize with the profile.•Connection settings — Specify the neededconnection settings. Contact your service providerfor information.57Connectivityfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 57 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 57 Jun 26, 2006 9:34:16 AM
WebSelect Menu > Web (network service).Web is one of the two browsers in your device. WithWeb, you can browse regular Web sites. These pagesuse the extensible hypertext markup language (XHTML)or hypertext markup language (HTML). If you want tobrowse WAP pages, use Menu > Media > Services. Bothof the browsers use the same bookmarks. The links inyour received messages open in the Services browser.Check the availability of services, pricing, and fees withyour network operator or service provider. Serviceproviders will also give you instructions on how to usetheir services.Access pointsTo browse the Web, you need to configure Internetaccess point settings. If you are using a data call or aGPRS connection, your wireless network must supportdata calls or GPRS, and the data service must beactivated for your SIM card. Your device might haveconfigured the Internet access point settingsautomatically based on your SIM card. If not, contactyour service provider for the correct settings.Tip: You may receive the Internet access pointsettings from your service provider as a specialtext message or from the network operator'sor service provider's Web pages.You can also enter the Internet access point settingsmanually. See "Internet access points," p. 49.Browse the WebUse the joystick for browsing. The joystick is shown asa pointer on a Web page, and you can scroll the pagesup, down, left and right with it. When you move thepointer over a link, the pointer changes into a hand.Press the joystick to open the link.To browse the Web, select a bookmark, and press thejoystick. You can also enter the Web address, and pressthe joystick. Use only services that you trust and thatoffer adequate security and protection against harmfulsoftware.Tip: When you start to enter the address,addresses of pages you have previously visitedthat match your input are displayed. To open apage, scroll to the address, and press thejoystick.To open a Web link, scroll to it and press the joystick.On a Web page, new links usually appear underlined inblue and previously visited links in purple. Images thatact as links have a blue border around them.Addresses of the pages you visit are saved in the Auto.bookmarks folder.Keyboard shortcuts:58Webfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 58 Jun 26, 2006 9:34:16 AM
•Press 1 to open your Bookmarks.•press 2 to find text.•Press 3 to return to the previous page.•Press 5 to switch between your open browserwindows.•Press 8 to open page overview.•Press 9 to go to a different Web page.BookmarksYour device may have some bookmarks loaded for sitesnot affiliated with Nokia. Nokia does not warrant orendorse these sites. If you choose to access them, youshould take the same precautions, for security orcontent, as you would with any Internet site.To view a bookmarked Web page, scroll to thebookmark, and press the joystick.To browse another Web pages, select Options >Navigation options > Go to web address, enter the pageaddress, and select Go to.To delete a bookmark, scroll to it, and press the clearkey.To add a bookmark, select Menu > Web > Options >Bookmark manager > Add bookmark. Scroll to Name toenter a descriptive name for the bookmark, Address toenter the Web page address, Access point to change theaccess point to connect to the Web page, and Username or Password to enter your user name andpassword, if required by the service provider. To savethe bookmark, select Back.End a connectionTo end the connection and view the browser pageoffline, select Options > Advanced options >Disconnect; or to end the connection and close thebrowser, select Options > Exit.Clear the cacheA cache is a memory location that is used to store datatemporarily. If you have tried to access or have accessedconfidential information requiring passwords, emptythe cache after each use. The information or servicesyou have accessed are stored in the cache.To clear the cache, select Options > Advanced options >Clear cache.News feeds and blogsSelect Menu > Web > Web feeds.Feeds usually contain headlines and articles, oftenabout recent news or other topics.Tip: Blog is a shortening of Weblog, which is acontinuously updated Web diary. Often theauthor's personality is an important factor inthe blog.To download a feed or blog, scroll to it, and press thejoystick.To add a feed or blog, select Options > Manage feed >New feed, and enter the information.59Webfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 59 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 59 Jun 26, 2006 9:34:16 AM
To edit a feed or blog, scroll to a feed, select Options >Manage feed > Edit, and modify the information.Web settingsSelect Menu > Web > Options > Settings.Define the following settings:•Access point — Scroll to the access point to connectto Web pages, and press the joystick.•Homepage — Select the page that you want toappear as your homepage. Select Default to use theaccess point homepage, User defined to enter thehomepage address, or Use current page to use thecurrently open Web page.•Load imgs. & sounds — Select No to load pages fasterwhen browsing by not loading the images on them.•Font size — Select the preferred font size for thedisplayed Web pages.•Default encoding — Select the correct characterencoding for your language.•Auto. bookmarks — Select On to save Web pageaddresses that you visit automatically in the Auto.bookmarks folder. To hide the folder, select Hidefolder.•Screen size — Select Full screen to use the wholedisplay area for viewing Web pages. You can pressthe left selection key to open Options and use theavailable options while browsing in full screenmode.•Mini map — Select whether you want to see anoverview of the page as a miniature on top of thepage you are viewing.•History list — Select whether you want to seeminiatures of the pages you have visited when youwant to go back in your browsing history.•Cookies — Select to allow or reject the sending andreceiving of cookies. Cookies are info the networkserver collects about your visits to various Webpages. They are necessary if you shop on the Web(for example, to retain the items you buy until youreach the cashier page). However, the informationmay be misused (for example, you may receiveunwanted advertisements in your device).•Java/ECMA script — Some Web pages may includeprogram commands that affect the appearance ofthe page or interaction between the page and itsbrowsers. To deny the use of such scripts, selectDisabled (for example, if you have troubledownloading).•Security warnings — Select Show or Hide to see orhide the security warnings you may receive duringbrowsing.•Block pop-ups — Select whether you want to allowpop-ups. Some pop-ups may be necessary (forexample, smaller windows where you write e-mailsin Web-based mail systems), but they may alsocontain unwanted advertising.ServicesSelect Menu > Media > Services (network service).Services is one of the two browsers in your device. WithServices, you can browse WAP pages that have beendesigned specially for mobile devices. For example,operators may have WAP pages for mobile devices. To60Webfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 60 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 60 Jun 26, 2006 9:34:16 AM
browse regular Web pages, use the other browser inMenu > Web.Check the availability of services, pricing, and fees withyour network operator or service provider. Serviceproviders will also give you instructions on how to usetheir services.Tip: To start a connection, press and hold 0 inthe standby mode.61Webfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 61 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 61 Jun 26, 2006 9:34:16 AM
CameraModel number: E50-1 (RM-170).This section describes the camera in your E50-1 device.When taking and using images or video clips, obey alllaws, and respect local customs as well as privacy andlegitimate rights of others.You can take photos or record video clips with the built-in camera. The camera lens is on the back of the device,and the display works as a viewfinder. The cameraproduces pictures in .jpeg format and video clips in .3gpp format.Take a picture1. Select Menu > Media > Camera.The Nokia E50 device supports an image captureresolution of up to 1280 x 960 pixels. The imageresolution in these materials may appear different.2. Use the display as a viewfinder, aim at your subject,and press the joystick. The device saves the photoin the default folder, or in the folder you havedefined.Tip: To zoom in or out before taking apicture, scroll up or down.3. If you do not want to keep the saved photo, selectOptions > Delete. Select Back to return to theviewfinder to take another picture. Select Options >Go to Gallery to view the photo in Gallery.If the light is dim, select Options > Night mode after youhave opened Camera but before taking a picture.To adjust the image, select Options > Adjust > Whitebalance or Color tone.To take pictures in a sequence, select Options >Sequence mode. The camera takes six pictures in a row.To take timed pictures, select Options > Self-timer,select the desired timeout, and press Activate. Thecamera takes a picture after the timeout has passed.Tip: You can view and modify photos in Menu >Media > Gallery > Images.Record a video clipSelect Camera, and scroll right to activate the videorecorder. To start recording a video clip, press thejoystick. The remaining recording time is shown on thetop of the display. To pause the recording, selectPause; to resume the recording, select Continue. To stopthe recording, select Stop. The device saves the clip inthe default folder, or in the folder you have defined. Ifyou do not want to keep the saved video clip, selectOptions > Delete. Select Back to return to the viewfinderto record another video clip. Select Options > Play toview the video clip in the RealPlayer application.62Camerafile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 62 Jun 26, 2006 9:34:16 AM
Insert pictures intomessagesWhen you are creating a new multimedia message, youcan open the camera to insert a new picture into themessage.To insert a picture into a multimedia message, selectOptions > Insert new > Image. The viewfinder showsyou the image to be captured. To take a picture, pressthe joystick. To insert the picture in the message, pressthe joystick.Insert videos into messagesWhen you are creating a new multimedia message, youcan open the camera to insert a new video into themessage.To insert a video into a multimedia message, selectOptions > Insert new > Video clip. Press the joystick tostart recording. To insert the video in the message,select Options > Select.SettingsTo edit the image settings, select Menu > Media >Camera > Options > Settings > Image, and define thefollowing:•Image quality — Define how much the picture iscompressed when being saved. High provides thebest image quality, but takes more memory.Normal is the default quality setting. Basic takes theleast amount of memory.•Show captured img. — Select whether you want thecaptured image to be displayed after the capture.•Image resolution — Select the resolution of theimages you capture.•Default image name — Select Date or Text for thedefault title assigned to a picture. Date assigns thedate of the capture as the title. Text assigns the termyou define and a number to the picture.•Memory in use — Select the memory to use forstoring images: Phone memory or Memory card.To edit the video settings, select Options > Settings >Video, and define the following:•Length — Select the length of the video clips thatyou record. The maximum length of a video clipdepends on the available memory.•Video resolution — Select the resolution to useduring video recording. The default setting for theresolution is always the lowest setting.•Default video name — Select Date or Text for thedefault title assigned to a recorded video. Dateassigns the date of the recording as the title. Textassigns the term you define and a number to therecorded video.•Memory in use — Select the memory to use forstoring recorded videos: Phone memory or Memorycard.63Camerafile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 63 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 63 Jun 26, 2006 9:34:16 AM
Media applicationsCopyright protections may prevent some images, music(including ringing tones), and other content from beingcopied, modified, transferred or forwarded.Select Menu > Media.Media contains different media applications that allowyou to save and view images, record sounds, and playsound clips.With Gallery you can access and use different types ofmedia, including images, videos, music, and sounds. Allviewed images and videos and all received music andsounds are automatically saved to Gallery. You canbrowse, open, and create folders; and mark, copy, andmove items to folders.With RealPlayer you can play video clips and audio filesthat are stored in the device memory or on a memorycard, transferred to your device from e-mail orcompatible PC, or streamed to your device over theWeb.With Music player, you can play music files and createand listen to track lists.With Flash Player, you can view, play, and interact withflash files made for mobile devicesNokia CatalogsSelect Menu > Catalogs. Select OK if you accept thedisclaimer.Nokia Catalogs (network service) is a mobile contentshop available on your device. With Nokia Catalogs youcan discover, preview, buy, download, and upgradecontent, such as games, ringing tones, wallpapers,services, and applications, for your device. The availablecontent depends on your network operator and serviceprovider.Nokia Catalogs uses your network services to access themost updated catalog content. For information onadditional items available through Nokia Catalogs,contact your network operator or service provider.Nokia Catalogs receives ongoing updates, bringing youthe latest content your network operator or serviceprovider offers for your device. To update the catalogsmanually, select Options > Refresh list.64Media applicationsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 64 Jun 26, 2006 9:34:16 AM
SettingsSelect Menu > Tools > Settings.You can define and modify various settings of yourdevice. Modifying these settings affects the operationof your device across several applications.Some settings may be preset for the device or sent toyou in a configuration message by your networkoperator or service provider. You may not be able tochange such settings.Scroll to the setting that you want to edit, and press thejoystick to do the following:•Switch between two values, such as on or off.•Select a value from a list.•Open a text editor to enter a value.•Open a slider to decrease or increase the value byscrolling left or right.Phone settingsSelect Phone to change the language settings, standbymode settings, and display settings of your device.General settingsSelect General and from the following:•Phone language — Select a language from the list.Changing the device language affects everyapplication in your device. When you change thelanguage, the device restarts.•Writing language — Select a language from the list.Changing the writing language also affects thecharacters that are available when writing text andthe predictive text dictionary that is used.•Predictive text — Select On to use predictive textinput. The predictive text dictionary is not availablefor all languages.•Welcome note / logo — Select Default to use thedefault image, Text to enter a welcome note of yourown, or Image to select an image from the Gallery.The welcome note or image is displayed briefly eachtime you switch on the device.•Orig. phone settings — Restore the original devicesettings. To do this, you need your device lock code.After resetting, the device may take a longer time topower on. Documents, contact information,calendar entries, and files are unaffected.Notification lightYou can set the notification light on the cover of yourdevice to blink when you have received a new messageor when you have missed a phone call.To define the notification light settings, select Menu >Tools > Settings > Phone > General > Notificationlight.65Settingsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 65 Jun 26, 2006 9:34:16 AM
To set the time how long you want the notification lightto blink, scroll to Blink light for and press the joystick.To select whether you want to be notified of new shortmessages, multimedia messages, e-mail messages, andmissed phone calls, scroll to Notified events and pressthe joystick.Standby mode settingsSelect Standby mode and from the following:•Active standby — Select On to have shortcuts todifferent applications available in the active standbymode.•Left selection key, Right selection key — Change theshortcuts that open from the left and right selectionkeys in the standby screen. Press joystick, select afunction from the list, and OK.•Navigation key right, Navigation key left, Navigat.key down, Navigation key up, Selectionkey — Change the shortcuts that open when youscroll to different directions. These settings are notavailable if you select Active standby > On.Display settingsSelect Display and from the following:•Brightness — Adjust the amount of light required toilluminate the device display.•Power saver time-out — Select the amount of timebefore the screen saver is activated. Activating thescreen saver lengthens the device operating time.•Light time-out — Set how quickly after last keypressthe display dims.Call settingsSelect Call and from the following:•Send my caller ID — Select Yes to display your phonenumber to the person you are calling or Set bynetwork to let the network to determine whetheryour caller ID is sent.•Call waiting — Select Activate to be notified of a newincoming call while you have a call in progress orCheck status to check if the function is active on thenetwork.•Reject call with SMS — Select Yes to send a textmessage automatically to the person who is callingyou informing why you cannot answer theirincoming call.•Message text — Enter the text that is sent when youcannot answer an incoming call and want toautomatically send a text message as a reply.•Automatic redial — Select On to redial a number if itwas busy at the first call attempt. Your device makesa maximum of 10 attempts to connect the call.•Summary after call — Select On to briefly display theapproximate duration of the last call.•1-touch dialing — Select On to activate speed dialingon your device. To dial a phone number assigned tothe speed dialing keys (2-9), press and hold the key.See "1-touch dial," p. 18.•Anykey answer — Select On to answer an incomingcall by briefly pressing any key, except the end key.•Line in use — Select Line 1 or Line 2 to change thephone line for outgoing calls and text messages(network service). This setting is displayed only if theSIM card supports the alternate line service and asubscription to two phone lines.66Settingsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 66 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 66 Jun 26, 2006 9:34:16 AM
•Line change — Select Disable to prevent lineselection (network service). To change this setting,you need the PIN2 code.Connection settingsSelect Menu > Tools > Settings > Connection and fromthe following:•Access points — Set up new or edit existing accesspoints. Some or all access points may be preset foryour device by your service provider, and you maynot be able to create, edit, or remove them.•Packet data — Determine when packet dataconnections are used, and enter the access point ifyou use your device as a modem for a computer.•Internet tel. settings — Define settings for net calls.•SIP settings — View or create session initiationprotocol (SIP) profiles.•Data call — Set the time-out period after which datacall connections automatically end.•VPN — Install and manage VPN policies, manage VPNpolicy servers, see the VPN log, and create andmanage VPN access points.•Configurations — View and delete trusted serversfrom which your device may receive configurationsettings.To obtain information about subscribing to a packetdata service and the appropriate connection andconfiguration settings, contact your network operatoror service provider.The settings available for editing may vary.Access pointsSelect Menu > Tools > Settings > Connection > Accesspoints.An access point is where your device connects to thenetwork by way of a data connection. To use e-mail andmultimedia services or to browse web pages, you mustfirst define access points for these services.An access point group is used for grouping andprioritizing access points. An application can use agroup as a connection method instead of a single accesspoint. In that case, the best available access point insidea group is used for making the connection, and in caseof e-mail, also for roaming.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.See "Internet access points," p. 49.Packet dataSelect Menu > Tools > Settings > Connection > Packetdata.Your device supports packet data connections, such asGPRS in the GSM network. When you are using yourdevice in the GSM network, it is possible to havemultiple data connections active at the same time;access points can share a data connection, and dataconnections remain active (for example, during voicecalls). See "Connection manager," p. 55.67Settingsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 67 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 67 Jun 26, 2006 9:34:16 AM
Packet data settingsThe packet data settings affect all access points using apacket data connection.Select from the following:•Packet data conn. — Select When available toregister the device to the packet data network whenyou switch the device on in a supported network.Select When needed to establish a packet dataconnection only when an application or actionrequires it.•Access point — Enter the access point nameprovided by your service provider to use the deviceas a packet data modem to your computer.These settings affect all access points for packet dataconnections.Data call settingsSelect Menu > Tools > Settings > Connection > Datacall.To set the time-out period after which data callsautomatically end if no data has been transferred,select Online time, and press the joystick. Select Userdefined to enter the time yourself or Unlimited to keepthe connection active until you select Options >Disconnect.VPNVPN access pointsTo manage VPN access points, select VPN > VPN accesspoints > Options, and from the following:•Edit — Edit the selected access point. If the accesspoint is in use or its settings are protected, youcannot edit it.•New access point — Create a new VPN access point.•Delete — Delete the selected access point.VPN access point settingsContact your service provider for the correct accesspoint settings.To edit VPN access point settings, select the access pointand Options.Select from the following:•Connection name — Enter a name for the VPNconnection. The maximum length of the name is 30characters.•VPN policy — Select a VPN policy to be used with thisaccess point.•Internet access pt. — Select the Internet access pointto be used with this VPN access point.•Proxy serv. address — Enter the proxy server addressof this VPN access point.•Proxy port number — Enter the number of the proxyport.68Settingsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 68 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 68 Jun 26, 2006 9:34:16 AM
ConfigurationsTo view and delete configurations for trusted servers,select Menu > Tools > Settings > Connection >Configurations.You can receive messages from your network operator,service provider, or company information managementthat contain configuration settings for trusted servers.These settings are automatically saved inConfigurations. You may receive configuration settingsfor access points, multimedia or e-mail services, and IMor synchronization settings from trusted servers.To delete configurations for a trusted server, scroll tothe server, and press the clear key. The configurationsettings for other applications provided by this serverare also deleted.Date and time settingsSelect Menu > Tools > Settings > Date and time.Select from the following:•Time — Enter the time.•Time zone — Enter the time zone.•Date — Enter the date.•Date format — Change how the date is displayed.•Date separator — Change the symbol that separatesdays, months, and years.•Time format — Select the 12-hour or 24-hour clocksystem.•Time separator — Select the symbol that separateshours and minutes.•Clock type — Select Analog or Digital.•Clock alarm tone — Select the tone that you want touse for the alarm clock.•Network operator time — Update time, date, andtime zone information automatically (networkservice). Select Auto-update to activate. This servicemay not be available in all networks.Security settingsSee "Define security settings," p. 21.Enhancement settingsSelect Menu > Tools > Settings > Enhancement.Warning: When you use the headset, your abilityto hear outside sounds may be affected. Do not use theheadset where it can endanger your safety.With most enhancements, you can select from thefollowing settings:•Default profile — Select the profile that is activatedwhen you attach an enhancement to your device.•Automatic answer — Let the device answer phonecalls automatically when an enhancement isattached. Select On to have the device answer anincoming call automatically after 5 seconds. If theringing type is set to Beep once or Silent in theProfiles menu, automatic answer is disabled.•Lights — Select On to illuminate the device while itis attached to an enhancement.69Settingsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 69 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 69 Jun 26, 2006 9:34:16 AM
ToolsSelect Menu > Tools.The Tools folder contains applications used to configureyour device and to configure other applications.Memory card—See "Memory card," p. 16.Transfer—See "Transfer content betweendevices," p. 14.Profiles—See "Profiles," p. 13.Settings—See "Settings," p. 65.Location servicesWith Positioning you can receive information fromservice providers about local issues such as weather ortraffic conditions, based on the location of your device(network service).With Navigator you can view your current location, findyour way to a desired location, and track distance. Theapplication requires a Bluetooth GPS accessory tooperate.With Landmarks you can save coordinates togeographic locations to your device for later use indifferent location-based services. You can createlandmarks using a Bluetooth GPS enhancement ornetwork (network service).For more information on all these applications, see theextended user guide on the Web.Sett. wizardSett. wizard configures your device for operatorsettings based on your network operator information.To use these services, you may have to contact yournetwork operator or service provider to activate a dataconnection or other services.To edit settings, select Menu > Tools > Sett. wizard andthe item you want to configure.If you are not able to use Sett. wizard, visit the Nokiaphone settings Web site at www.nokia.com.Application managerSelect Menu > Tools > App. manager.When you open the application manager, you see allthe software packages that have been installed, withtheir name, version number, type, and size. You canview the details of installed applications, remove themfrom your device, and specify installation settings.Certificate managerImportant: Note that even if the use ofcertificates makes the risks involved in remoteconnections and software installation considerablysmaller, they must be used correctly in order to benefit70Toolsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 70 Jun 26, 2006 9:34:16 AM
from increased security. The existence of a certificatedoes not offer any protection by itself; the certificatemanager must contain correct, authentic, or trustedcertificates for increased security to be available.Certificates have a restricted lifetime. If Expiredcertificate or Certificate not valid yet is shown even ifthe certificate should be valid, check that the currentdate and time in your device are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs to thelisted owner.Digital certificates are used to verify the origins ofsoftware but do not guarantee safety. There are threedifferent types of certificates: authority certificates,personal certificates, and server certificates. During asecure connection, a server may send a servercertificate to your device. Upon receipt, it is checkedthrough an authority certificate stored on your device.You receive notification if the identity of the server isnot authentic or if you do not have the correctcertificate in your device.Download a certificate from a web site, or receive acertificate as an e-mail attachment, or as a messagesent through a Bluetooth or infrared connection.Certificates should be used when you connect to anonline bank or a remote server to transfer confidentialinformation. They should also be used if you want toreduce the risk of viruses or other malicious software,and to check the authenticity of software when youdownload and install software to your device.Tip: When you add a new certificate, check itsauthenticity.71Toolsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 71 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 71 Jun 26, 2006 9:34:16 AM
Device managementManage data and software on your device.Remote configurationnetwork serviceSelect Menu > Connectivity > Dev. mgr..You can connect to a server and receive configurationsettings for your device. You may receive server profilesand different configuration settings from your networkoperator, service providers, and company informationmanagement department. Configuration settings mayinclude connection and other settings used by differentapplications in your device. Available options may vary.The remote configuration connection is usually startedby the server when the device settings need to beupdated.Remote configuration settingsIn the Dev. mgr. main view, select Options and selectfrom the following:•Start configuration — Connect to the server andreceive configuration settings for your device.•New server profile — Create a new server profile.•Edit profile — Change the profile settings.•Delete — Remove the selected profile.•Enable config. — Select to receive configurationsettings from those servers for which you have aserver profile and have allowed configuration.•Disable config. — Select to stop receivingconfiguration settings from all servers for which youhave a server profile.•View log — View the configuration log of theselected profile.72Device managementfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 72 Jun 26, 2006 9:34:16 AM
Nokia original enhancementsA range of enhancements is available for your device.Select the enhancements that accommodate yourspecific communication needs. For availability of theenhancements, check with your local dealer, as theavailability may vary.Compatible power enhancements:•970 mAh Li-Ion battery (BL-5C)•1150 mAh Li-Ion battery (BL-6C)•Travel charger (AC-4)•Mobile charger (DC-4)•Charger adapter (CA-44)Compatible audio enhancements:•PopPort™ headsets•Wireless headsets•Inductive loopset (LPS-4)•TTY adapter (HDA-10)Compatible messaging and data enhancements:•Connectivity cable (CA-53)•MicroSD memory card•Wireless GPS module (LD-1W, LD-3W)•Wireless keyboard (SU-8W)Compatible carrying enhancements•Carrying case (CP-93. CP-68, CP-50)Compatible car enhancements:•Headrest Hands-free (BHF-3)•Plug-in Car Hands-free (HF-3)•Nokia Car Kit Phone(N610)•Nokia Car Kit Phone (N616)•Advanced Car Kit (CK-7W)•Car Kit (CK-10)•Wireless Plug-in Car Hands-free (HF-6W)•Advanced Plug-in Car Hands-free (HF-6)•Mobile Holder (CR-66)EnhancementsA few practical rules about accessories andenhancements.•Keep all accessories and enhancements out of thereach of small children.•When you disconnect the power cord of anyaccessory or enhancement, grasp and pull the plug,not the cord.•Check regularly that enhancements installed in avehicle are mounted and are operating properly.•Installation of any complex car enhancements mustbe made by qualified personnel only.73Nokia original enhancementsfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 73 Jun 26, 2006 9:34:16 AM
Battery informationYour device is powered by a rechargeable battery. Thefull performance of a new battery is achieved only aftertwo or three complete charge and discharge cycles. Thebattery can be charged and discharged hundreds oftimes, but it will eventually wear out. When the talk andstandby times are noticeably shorter than normal, buya new battery. Use only Nokia approved batteries, andrecharge your battery only with Nokia approvedchargers designated for this device.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave fully chargedbattery connected to a charger, since overcharging mayshorten its lifetime. If left unused, a fully chargedbattery will lose its charge over time.If the battery is completely discharged, it may take afew minutes before the charging indicator appears onthe display or before any calls can be made.Use the battery only for its intended purpose. Never useany charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as acoin, clip, or pen causes direct connection of the positive(+) and negative (-) terminals of the battery. (These looklike metal strips on the battery.) This might happen, forexample, when you carry a spare battery in your pocketor purse. Short-circuiting the terminals may damagethe battery or the connecting object.Leaving the battery in hot or cold places, such as in aclosed car in summer or winter conditions, will reducethe capacity and lifetime of the battery. Always try tokeep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not worktemporarily, even when the battery is fully charged.Battery performance is particularly limited intemperatures well below freezing.Do not dispose of batteries in a fire as they may explode.Batteries may also explode if damaged. Dispose ofbatteries according to local regulations. Please recyclewhen possible. Do not dispose as household waste.Talk and standby timesVariation in talk time and standby time may occur,depending on the SIM card, network and usage settings,and the style and environment of use.970 mAh Li-Ion battery (BL-5C)•GSM talk time: up to 6.8 hours•GSM standby time: up to 8 days1150 mAh Li-Ion battery (BL-6C)•GSM talk time: up to 8 hours•GSM standby time: up to 9.5 days74Battery informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 74 Jun 26, 2006 9:34:16 AM
Nokia batteryauthentication guidelinesAlways use original Nokia batteries for your safety. Tocheck that you are getting an original Nokia battery,purchase it from an authorized Nokia dealer, look forthe Nokia Original Enhancements logo on thepackaging and inspect the hologram label using thefollowing steps:Successful completion of the four steps is not a totalassurance of the authenticity of the battery. If you haveany reason to believe that your battery is not anauthentic original Nokia battery, you should refrainfrom using it and take it to the nearest authorized Nokiaservice point or dealer for assistance. Your authorizedNokia service point or dealer will inspect the battery forauthenticity. If authenticity cannot be verified, returnthe battery to the place of purchase.Authenticate hologram1. When looking at the hologramon the label, you should see theNokia connecting handssymbol from one angle and theNokia Original Enhancementslogo when looking fromanother angle.2. When you angle the hologramleft, right, down, and up, youshould see 1, 2, 3, and 4 dotson each side respectively.3. Scratch the side of the label toreveal a 20-digit code, forexample12345678919876543210.Turn the battery so that thenumbers are facing upwards.The 20-digit code readsstarting from the number atthe top row followed by thebottom row.4. Confirm that the 20-digit code is valid by followingthe instructions at www.nokia.com/batterycheck.What if your battery is notauthentic?If you cannot confirm that your Nokia battery with thehologram on the label is an authentic Nokia battery,please do not use the battery. Take it to the nearestauthorized Nokia service point or dealer for assistance.The use of a battery that is not approved by themanufacturer may be dangerous and may result in poorperformance and damage to your device and itsenhancements. It may also invalidate any approval orwarranty applying to the device.75Battery informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 75 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 75 Jun 26, 2006 9:34:16 AM
To find out more about original Nokia batteries, visitwww.nokia.com/battery.76Battery informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 76 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 76 Jun 26, 2006 9:34:16 AM
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thesuggestions below will help you protect your warrantycoverage.•Keep the device dry. Precipitation, humidity, and alltypes of liquids or moisture can contain mineralsthat will corrode electronic circuits. If your devicedoes get wet, remove the battery, and allow thedevice to dry completely before replacing it.•Do not use or store the device in dusty, dirty areas.Its moving parts and electronic components can bedamaged.•Do not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or melt certainplastics.•Do not store the device in cold areas. When thedevice returns to its normal temperature, moisturecan form inside the device and damage electroniccircuit boards.•Do not attempt to open the device other than asinstructed in this guide.•Do not drop, knock, or shake the device. Roughhandling can break internal circuit boards and finemechanics.•Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.•Do not paint the device. Paint can clog the movingparts and prevent proper operation.•Use a soft, clean, dry cloth to clean any lenses, suchas camera, proximity sensor, and light sensor lenses.•Use only the supplied or an approved replacementantenna. Unauthorized antennas, modifications, orattachments could damage the device and mayviolate regulations governing radio devices.•Use chargers indoors.•Always create a backup of data you want to keep,such as contacts and calendar notes, before sendingyour device to a service facility.All of the above suggestions apply equally to yourdevice, battery, charger, or any enhancement. If anydevice is not working properly, take it to the nearestauthorized service facility for service.77Care and maintenancefile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 77 Jun 26, 2006 9:34:16 AM
Additional safety informationOperating environmentRemember to follow any special regulations in force inany area and always switch off your device when its useis prohibited or when it may cause interference ordanger. Use the device only in its normal operatingpositions. This device meets RF exposure guidelineswhen used either in the normal use position against theear or when positioned at least 5/8 inch (1.5 cm) awayfrom the body. When a carry case, belt clip, or holder isused for body-worn operation, it should not containmetal and should position the device at least 5/8 inch(1.5 cm) away from your body.In order to transmit data files or messages, this devicerequires a quality connection to the network. In somecases, transmission of data files or messages may bedelayed until such a connection is available. Ensure theabove separation distance instructions are followeduntil the transmission is completed.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer of themedical device to determine if they are adequatelyshielded from external RF energy or if you have anyquestions. Switch off your device in health care facilitieswhen any regulations posted in these areas instruct youto do so. Hospitals or health care facilities may be usingequipment that could be sensitive to external RFenergy.PacemakersPacemaker manufacturers recommend that aminimum separation of 15.3 centimeters (6 inches) bemaintained between a wireless phone and apacemaker to avoid potential interference with thepacemaker. These recommendations are consistentwith the independent research by andrecommendations of Wireless Technology Research.Persons with pacemakers should do the following:•Always keep the device more than 15.3 centimeters(6 inches) from the pacemaker•Not carry the device in a breast pocket•Hold the device to the ear opposite the pacemakerto minimize the potential for interference.•If you suspect interference, switch off your device,and move the device away.Hearing aidsSome digital wireless devices may interfere with somehearing aids. If interference occurs, consult your serviceprovider.78Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 78 Jun 26, 2006 9:34:16 AM
VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bag systems.For more information, check with the manufacturer, orits representative, of your vehicle or any equipmentthat has been added.Only qualified personnel should service the device, orinstall the device in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty that may apply to the device. Check regularlythat all wireless device equipment in your vehicle ismounted and operating properly. Do not store or carryflammable liquids, gases, or explosive materials in thesame compartment as the device, its parts, orenhancements. For vehicles equipped with an air bag,remember that air bags inflate with great force. Do notplace objects, including installed or portable wirelessequipment in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed, and the air bag inflates, seriousinjury could result.Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey all signsand instructions. Potentially explosive atmospheresinclude areas where you would normally be advised toturn off your vehicle engine. Sparks in such areas couldcause an explosion or fire resulting in bodily injury oreven death. Switch off the device at refueling pointssuch as near gas pumps at service stations. Observerestrictions on the use of radio equipment in fueldepots, storage, and distribution areas; chemicalplants; or where blasting operations are in progress.Areas with a potentially explosive atmosphere areoften, but not always, clearly marked. They includebelow deck on boats, chemical transfer or storagefacilities, vehicles using liquefied petroleum gas (suchas propane or butane), and areas where the air containschemicals or particles such as grain, dust, or metalpowders.Emergency callsImportant: Wireless phones, including thisdevice, operate using radio signals, wireless networks,landline networks, and user-programmed functions.Because of this, connections in all conditions cannot beguaranteed. You should never rely solely on anywireless device for essential communications likemedical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength.Some networks may require that a valid SIM card isproperly inserted in the device.2. Press the end key as many times as needed to clearthe display and ready the device for calls.79Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 79 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 79 Jun 26, 2006 9:34:16 AM
3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.If certain features are in use, you may first need to turnthose features off before you can make an emergencycall. Consult this guide or your service provider for moreinformation.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wirelessdevice may be the only means of communication at thescene of an accident. Do not end the call until givenpermission to do so.CERTIFICATIONINFORMATION(SAR)THIS MOBILE DEVICE MEETSGUIDELINES FOR EXPOSURE TORADIO WAVES.Your mobile device is a radio transmitter and receiver.It is designed not to exceed the limits for exposure toradio waves recommended by international guidelines.These guidelines were developed by the independentscientific organization ICNIRP and include safetymargins designed to assure the protection of allpersons, regardless of age and health.The exposure guidelines for mobile devices employ aunit of measurement known as the Specific AbsorptionRate or SAR. The SAR limit stated in the ICNIRPguidelines is 2.0 watts/kilogram (W/kg) averaged over10 grams of tissue. Tests for SAR are conducted usingstandard operating positions with the devicetransmitting at its highest certified power level in alltested frequency bands. The actual SAR level of anoperating device can be below the maximum valuebecause the device is designed to use only the powerrequired to reach the network. That amount changesdepending on a number of factors such as how closeyou are to a network base station. The highest SAR valueunder the ICNIRP guidelines for use of the device at theear is 0.97 W/kg.Use of device accessories and enhancements may resultin different SAR values. SAR values may vary dependingon national reporting and testing requirements and thenetwork band. Additional SAR information may beprovided under product information atwww.nokia.com.Your mobile device is also designed to meet therequirements for exposure to radio waves establishedby the Federal Communications Commission (USA) andIndustry Canada. These requirements set a SAR limit of1.6 W/kg averaged over 1 gram of tissue. The highestSAR value reported under this standard during productcertification for use at the ear and when properly wornon the body are:DevicetypeIC FCC ID SAR atthe earSAR onthe bodyRM-170 661R-RM170PDNRM-1700.88 W/kg1.15 W/kg80Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 80 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 80 Jun 26, 2006 9:34:16 AM
RM-171 661R-RM171PDNRM-1710.96 W/kg1.33 W/kgInformation about these device models can be found atwww.fcc.gov/oet/fccid by searching the equipmentauthorization system using FCC ID: PDNRM-170 andPDNRM-171.81Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 81 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 81 Jun 26, 2006 9:34:16 AM
Technical informationCharacteristic ValueOperating system Symbian 9.1, S60 release3.0UCPU ARM926, 235 Mhz, 32-bitSupported platforms/technologiesC++, Java MIDP 2.0Frequency (RM-170) Quadband EGSM 850, 900,1800, and 1900Frequency (RM-171) Quadband EGSM 850, 900,1800, and 1900Data transmission EGPRS, GPRS, CSD, HSCSDSize Length: 113 mm, width:43,5 mm, thickness: 15,5mmVolume Approx. 70 ccWeight Approx. 105 gMemory User: up to 70 MBMemory card: microSD(hot swap). Storageamount varies.Connectivity Bluetooth (version 2.0),USB 2.0 via PopPort,PopPort connector withACI, infraredBrowser HTML, XHTML, WAP 2.0Voice features Voice dialing, voicerecorder, enhanced voicecommandsOperating temperature 14°F to 104°F (- 10°C to +40°C)82Technical informationfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 82 Jun 26, 2006 9:34:16 AM
IndexSymbols/Numerics1-touch dialing 18Aaccess points 49, 67answering calls 19application manager 70applicationscommon actions 11attachments 39authority certificates 70automatic answer 69Bblogs 59Bluetoothconnections 50pairing 52settings 51bookmarks 59browsing Web pages 58, 60business cards 27Ccable 50calculator 45calendar 29calling 18callsforwarding 19restricting 19settings 66camera 62recording a video clip 62taking a picture 62certificates 70clock 48connecting to the Internet 49connection manager 55connection methodsBluetooth 50cable 50infrared 54modem 56connectionsGPRS settings 49contact groups 26contact information 27contactsadding 26copying information 27default information 27groups 26ringing tones 27copying text 13Ddataconnections 55declining calls 19displaysettings 66documents 46Ee-mailaccounts 41messages 37replying 39writing 40ending network connections 55enhancement settings 69enhancements 73Ffeeds 59file manager 46Find 11forwarding calls 19Ggeneral packet radio serviceSee GPRSGPRSaccess point settings 4983Indexfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 83 Jun 26, 2006 9:34:16 AM
general 55settings 68Hhelp 16Iinfrared 54Internet 58access points 49net call settings 67settings 49Jjoystick 66Llanguage 65logs 20MmailSee e-mailmedia applications 64memory 15monitoring 15memory card 16microSD 16menu 10messagesdeleting 40e-mail 37folders 31multimedia messages 34picture messages 33special messages 43text messages 32microSD 16mobile VPNSee VPNmodem 56multimedia messagescreating 34receiving 35replying to 35sending 34settings 36Nnotes 45notification light 65Ppacket dataaccess point settings 49general 55settings 68pairing 52personal certificates 70personalization 13, 14phonecalls 18language 65settings 65photos 62picture messages 33playingvoice recordings 24predictive text input 12, 65presentations 47profiles 13QQuickoffice 46Quickpoint 47Quicksheet 47Quickword 46Rrecordingcalls 24video clips 62voice 24rejecting calls 19remote configurationsettings 72remote synchronization 57restrictingcalls 19restriction password 21ringing tones 27SSearch 11securitydevice 20selection key settings 66service commands 43settingsBluetooth 5184Indexfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 84 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 84 Jun 26, 2006 9:34:16 AM
calendar 30calls 66connection 67display 66general 65Internet 49message centers 32multimedia messages 36profiles 13remote configuration 72security 21standby 66text messages 33Web 60SettingWizard 70SIM access profile 53SIM cardtext messages 32SMS messages 32special messages 43Speech 24spreadsheets 47standbymode 9settings 66storage 16TTeam suite 44textcopying 13predictive input 12traditional input 12writing 12text messagesediting message centers 32managing messages in the SIMcard 32replying 32sending 32writing 32themes 14to-do list 29tools folder 70traditional text input 12tutorial 16UUSB data cable 50Vvideo clips 62virtual private network 56voice commands 22voice dialing 22voice mailbox 18voice memos 24voice recorder 24volume 13VPN 56WWeb 58welcome note 65writing language 65Zzip manager 4885Indexfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 85 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 85 Jun 26, 2006 9:34:16 AM

Navigation menu