Microsoft RM-227 Quad band GSM / WCDMA cellular phone User Manual Manual
Microsoft Mobile Oy Quad band GSM / WCDMA cellular phone Manual
Contents
Manual
Nokia E61i User Guide
9254199
Issue 1
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 1 Jan 29, 2007 12:37:36 PM
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-227 product is in compliance with the essential requirements
and other relevant provisions of Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at
www.nokia.com/phones/declaration_of_conformity/.
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal
waste. For more information, see product Eco-Declaration or country specific information at www.nokia.com.
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia Care, Eseries, E61i, Navi and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Nokia tune
is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective
owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
This product includes software licensed from Symbian Software Ltd © 1998-2007. Symbian and Symbian OS are trademarks of Symbian
Ltd.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS
OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 2 Jan 29, 2007 12:37:36 PM
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary
to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
Model number: E61i-1
9254199/Issue 1
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 3 Jan 29, 2007 12:37:36 PM
Contents
For your safety..............................................................7
About your device....................................................................8
Network services......................................................................8
Enhancements, batteries, and chargers............................9
Basic information about your device..................10
Menu..........................................................................................10
Scroll and make selections.................................................11
Write text.................................................................................11
Change the writing language............................................12
Common actions in several applications........................12
Memory.....................................................................................12
Installing applications..........................................................13
Voice aid...................................................................................13
Hear your messages..............................................................14
Profiles......................................................................................14
Themes......................................................................................15
Search........................................................................................16
Notification light....................................................................16
Transfer content between devices.......................17
Transfer data with Bluetooth or infrared......................17
Synchronize data with another device...........................18
Messages......................................................................19
Organize messages...............................................................19
Search for messages.............................................................19
E-mail messages.....................................................................19
Text messages........................................................................23
Multimedia messages...........................................................25
Instant messaging.................................................................27
Special messages...................................................................30
Message settings....................................................................31
Telephone....................................................................35
Make a call................................................................................35
1-touch dial..............................................................................35
Answer a call...........................................................................36
Forward calls...........................................................................36
Call restriction.........................................................................36
Video calls................................................................................37
Push to talk..............................................................................38
Net calls.....................................................................................41
Voice commands....................................................................44
Voice mailbox..........................................................................45
Log..............................................................................................45
Contacts........................................................................46
Manage contact groups.......................................................46
Manage default information..............................................47
Copy contacts between SIM and device
memory.....................................................................................47
Select ringing tones for contacts......................................47
Business cards.........................................................................47
Nokia Team suite.......................................................49
Edit teams................................................................................49
Calendar........................................................................51
Create calendar entries........................................................51
Contents
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 4 Jan 29, 2007 12:37:36 PM
To-do..........................................................................................51
Calendar views........................................................................52
Add a received calendar entry to your calendar..........52
Clock...............................................................................53
Connectivity.................................................................54
Packet data (GPRS)................................................................54
UMTS (3G).................................................................................54
Cable connection....................................................................55
Bluetooth..................................................................................55
Infrared.....................................................................................59
Modem......................................................................................60
Email data roaming...............................................................60
Internet access points..........................................................61
Connection manager............................................................62
Wireless local area network (WLAN)....................64
See wireless LAN availability..............................................64
Wireless LAN connections...................................................64
Operating modes...................................................................65
WLAN wizard...........................................................................65
Wireless LAN access points.................................................66
Set up a wireless LAN access point manually...............66
Wireless LAN settings...........................................................67
Web................................................................................68
Access points...........................................................................68
Browse the Web.....................................................................68
Bookmarks...............................................................................69
Download items.....................................................................69
End a connection....................................................................69
News feeds and blogs..........................................................70
Web settings...........................................................................70
Services.....................................................................................71
Office applications ....................................................72
File manager...........................................................................72
Quickoffice...............................................................................72
Print............................................................................................73
Notes..........................................................................................74
Calculator..................................................................................74
Converter..................................................................................74
Screen export..........................................................................75
Data and software management..........................77
Application manager............................................................77
Remote configuration network service..........................77
Data synchronization............................................................77
Download!................................................................................78
Settings Wizard......................................................................78
Camera..........................................................................80
Take a picture.........................................................................80
Record a video clip................................................................80
Insert pictures into messages............................................81
Insert videos into messages...............................................81
Settings.....................................................................................81
Media applications....................................................82
Gallery........................................................................................82
RealPlayer ................................................................................83
Music player.............................................................................84
Recorder....................................................................................86
Flash player..............................................................................86
Settings.........................................................................88
Phone settings........................................................................88
Contents
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 5 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 5 Jan 29, 2007 12:37:36 PM
Call settings..............................................................................89
Connection settings..............................................................90
Date and time settings.........................................................94
Security settings.....................................................................94
Enhancement settings.........................................................95
Security.........................................................................96
Device security .......................................................................96
Memory card security...........................................................98
Certificate manager...............................................................98
Mobile VPN ..............................................................................99
Security settings for wireless LAN access
points.........................................................................................99
Shortcuts....................................................................100
Battery information................................................103
Nokia battery authentication guidelines.........104
Authenticate hologram.....................................................104
What if your battery is not authentic?.........................105
Care and maintenance...........................................106
Disposal..................................................................................106
Additional safety information.............................108
Small children.......................................................................108
Operating environment.....................................................108
Medical devices....................................................................108
Vehicles...................................................................................109
Potentially explosive environments..............................109
Emergency calls....................................................................109
CERTIFICATION INFORMATION (SAR)................................110
Index............................................................................112
Contents
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 6 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 6 Jan 29, 2007 12:37:36 PM
For your safety
Read these simple guidelines. Not following them may
be dangerous or illegal. Read the complete user guide
for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may cause
interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands
free to operate the vehicle while driving.
Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off
near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can
cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do
not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device
where blasting is in progress.
USE SENSIBLY
Use only in the positions as explained in the
product documentation. Do not touch the
antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair
this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
BACK-UP COPIES
Remember to make back-up copies or keep
a written record of all important information
stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read
its user guide for detailed safety instructions.
Do not connect incompatible products.
7
For your safety
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 7 Jan 29, 2007 12:37:36 PM
EMERGENCY CALLS
Ensure the phone function of the device is
switched on and in service. Press the end key
as many times as needed to clear the display
and return to the standby mode. Enter the
emergency number, then press the call key.
Give your location. Do not end the call until
given permission to do so.
About your device
The wireless device described in this guide is approved
for use on the GSM 850/900/1800/1900, UMTS 2100
network. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate rights
of others, including copyrights.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device
may be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise
caution and open messages, accept connectivity
requests, download content, and accept installations
only from trustworthy sources. To increase the security
of your devices, consider installing, using, and regularly
updating antivirus software, firewall, and other related
software on your device and any connected computer.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Your service
provider can give you instructions and explain what
charges will apply. Some networks may have
limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as e-mail, browsing, multimedia messages,
8
For your safety
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 8 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 8 Jan 29, 2007 12:37:36 PM
and content downloading, require network support for
these technologies.
Enhancements, batteries,
and chargers
Always switch the device off and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when
supplied with power from the AC-3, AC-4 and AC-5
chargers and from ACP-7, ACP-8, ACP-9, ACP-12, LCH-12
and AC-1 when used with the CA-44 adapter.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer. When you disconnect the power
cord of any enhancement, grasp and pull the plug, not
the cord.
9
For your safety
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 9 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 9 Jan 29, 2007 12:37:36 PM
Basic information about your device
Note: Your service provider may have requested
that certain features be disabled or not activated in
your device. If so, they do not appear on your device
menu. Your device may also have been specially
configured for your network provider. This
configuration may include changes in menu names,
menu order and icons. Contact your service provider for
more information.
Model numbers: Nokia E61i-1 and Nokia E61i-2.
The Nokia E61i-1 is equipped to work in Universal
Mobile Telecommunications System (UMTS) networks,
third-generation (3G) mobile communication networks
with the potential for increased data transmission
speeds and advanced services.
Hereinafter referred to as Nokia E61i.
An extended version of this user guide is available on
the Nokia Web site.
When you switch the device on, it may recognize the
SIM card provider and configure the correct text
message, multimedia message, and GPRS settings
automatically. If not, contact your service provider for
the correct settings, or use the Sett. wizard application.
Menu
The Menu is a starting point from which you can open
all applications in the device or on a memory card. The
Menu contains applications and folders, which are
groups of similar applications. Use the scroll key to scroll
up and down on the screen.
Applications that you install are saved in the Installat.
folder by default.
To open an application, scroll to it, and press the scroll
key.
To view the applications in a list, select Options >
Change view > List. To return back to the grid view,
select Options > Change view > Grid.
To view the memory consumption of different
applications and data stored on the device or memory
card and to check the amount of free memory, select
Options > Memory details and the memory.
To rearrange the folder, scroll to the application you
want to move, and select Options > Move. A check mark
is placed beside the application. Scroll to a new location,
and select OK.
To move an application to a different folder, scroll to
the application you want to move to another folder, and
select Options > Move to folder, the new folder, and
OK.
To download applications from the Web, select
Options > App. downloads.
To create a new folder, select Options > New folder.
You cannot create folders inside folders.
To rename a new folder, select Options > Rename.
10
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 10 Jan 29, 2007 12:37:36 PM
Tip: To switch between several open
applications, press and hold the menu key. The
application-switching window opens and
displays the open applications. Scroll to an
application, and press the scroll key to switch
to it.
Scroll and make selections
Use the scroll key to move and make selections. With
the scroll key, you can move up, down, left and right in
the Menu or in different applications or lists. You can
also press the scroll key to open applications, files, or
edit settings.
To select text, press and hold the shift key, and scroll
left or right until you have selected the text.
To select different items, such as messages, files, or
contacts, scroll up, down, left or right to highlight the
item you want to select. Select Options > Mark/
Unmark > Mark to select one item or Options > Mark/
Unmark > Mark all to select all items.
To select an object (for example, an attachment in a
document) scroll to the object so that square markers
appear on each side of the object.
Write text
Your device has a full keyboard. Most common
punctuation marks either have a key of their own or
they can be entered by pressing a combination of keys.
, and indicate the selected case.
Some characters (for example, punctuation marks and
symbols) are marked with color on the keys. To insert
a character marked with color, press the function key,
and the key that has the character you want.
To insert a number, press the function key so that is
shown on the display, and a key with a number on the
color background. To lock the function key and insert
only numbers, press the function key twice so that
is shown on the display.
To erase a character, press the backspace key. Press and
hold the backspace key to clear more than one
character.
To open a list of special characters, press the Chr key.
Use the scroll key to scroll through the list and select a
character.
To add characters by using other keys such as "A" or "O",
press and hold the Chr key and simultaneously press the
other key as many times as is needed before the
character you want is shown.
To switch between the different character cases, press
the shift key, so that is shown on the display.
Copy and paste text
1. To select letters and words, press and hold the shift
key. At the same time, scroll in the direction
necessary to highlight the word, phrase, or line of
text you want to copy. As the selection moves, the
text is highlighted.
2. To copy the text to the clipboard, press Ctrl+C. To
insert the text into a document, press Ctrl+V.
11
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 11 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 11 Jan 29, 2007 12:37:36 PM
Change the writing
language
When you write text, you can change the writing
language. When you are writing and press Chr+a key
several times to use a specific character, changing the
writing language gives you access to different
characters.
For example, if you are writing a message using a non-
Latin alphabet and want to add a person's name using
Latin alphabets, select Options > Writing language and
a writing language that uses Latin characters.
Common actions in several
applications
You can find the following actions in several
applications:
To switch between open applications, press and hold
the menu key to see a list of open applications. Select
an application.
To change the profile or switch off or lock the device,
press the power key briefly.
To save a file, select Options > Save. There are different
save options depending on the application you use.
To send a file, select Options > Send. There are different
send options depending on the application you use,
such as e-mail or multimedia messages and infrared or
Bluetooth connectivity.
To print to a compatible printer, select Options >
Printing options > Print. You can preview items that
you want to print, or edit the way printed pages look.
Before you can print, you must define a compatible
printer to your device. See "Print," p. 73.
To delete a file, press the backspace key, or select
Options > Delete.
Memory
There are two types of memory into which you can save
data or install applications: device memory and
removable memory.
Memory details
Select Menu, and Options > Memory details and Phone
mem. or Memory card.
You can see how much memory is currently in use, how
much free memory remains, and how much memory is
consumed by each data type. For example, you can see
how much memory your e-mail messages, text
documents, or calendar appointments consume.
Tip: To ensure that you have adequate
memory, you should regularly delete or
transfer data to a memory card or PC.
Memory card
Your Nokia device supports the FAT16 and FAT32 file
systems for memory cards. If you use a memory card
12
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 12 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 12 Jan 29, 2007 12:37:36 PM
from another device or if you want to ensure
compatibility of the memory card with your Nokia
device, you may need to format the memory card with
your Nokia device. However, all data in the memory card
is permanently deleted if you format the memory card.
Format a memory card
When a memory card is formatted, all data on the card
is lost permanently. Consult your retailer to find out if
you must format the memory card before you can use
it. To format a memory card, select Options > Format
mem. card. When formatting is complete, enter a name
for the memory card.
Back up and restore to the memory card
It is recommended to back up device memory regularly
to the memory card. The information can be restored
to your device later. To back up information from device
memory to a memory card, select Menu > Tools >
Memory > Options > Backup phone mem.. To restore
information from the memory card to the device
memory, select Menu > Tools > Memory > Options >
Restore from card.
If you cannot use a memory card in your device, you
may have the wrong type of memory card, the card may
not be formatted for your device, or the card has a
corrupted file system.
Tip: You can insert and remove a memory card
without removing the battery or switching off
the device.
Installing applications
You can use Nokia PC Suite to install applications. Nokia
PC Suite transfers the installation file to your device, and
the installation starts automatically. You can also
download an installation file from the web, in which
case the installation may start automatically. If the
installation does not start automatically, locate and
select the installation file on your device, and press the
scroll key.
Voice aid
Select Menu > Tools > Voice aid.
The voice aid application reads text on the screen,
allowing you to use basic functions of your device
without looking at the display.
Select from the following:
•Contacts — Hear the entries in your contacts list. Do
not use this option if you have more than 500
contacts.
•Recent calls — Hear information on your missed and
received calls, dialed numbers, and frequent calls.
•Voice mailbox — Retrieve and listen to your voice
messages.
•Dialer — Dial a telephone number.
•Clock — Hear the current time and date.
To hear more options, select Options.
13
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 13 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 13 Jan 29, 2007 12:37:36 PM
Hear your messages
Message reader readiness
Message reader reads your received text messages
aloud. The application is available in your device in
English. To download additional languages, visit
www.nokia.com.
For additional information, refer to the reference leaflet
included with your Nokia device.
Select Menu > Office > Msg. reader.
Select the text message you want to be read, and select
Play. You can also activate Msg. reader by pressing and
holding the left selection key when you receive a text
message.
To start reading the next message in your Inbox, scroll
right. To start reading the previous message, scroll left.
To pause the reading, press the left selection key briefly.
To continue, press the left selection key briefly again.
To end the reading, press the end key.
Speech
With Speech you can set the language, voice and voice
properties for Msg. reader.
Select Menu > Tools > Speech.
Voice properties
To edit the voice properties for the synthesized speech,
select Menu > Tools > Speech > Voice settings.
Select from the following options:
•Speed — Select the desired speech rate.
•Volume — Set the volume level for the speech.
Voice management
To manage the voices available for the selected
language, select Menu > Tools > Speech, and scroll
right.
Scroll to a voice, select Options and from the following:
•Play voice — Listen to the selected voice.
•Voice details — View information about the voice.
•Delete — Delete the selected voice.
Profiles
Important: In the offline profile you cannot make
or receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
Select Menu > Tools > Profiles.
You can adjust and customize the ringing tones, alert
tones, and other device tones for different events,
environments, or caller groups.
To customize a profile, scroll to the desired profile in
the list, and select Options > Customize.
Define the following settings:
14
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 14 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 14 Jan 29, 2007 12:37:36 PM
•Ringing tone — Select a ringing tone from the list,
or select Tone downloads to open a bookmark folder
containing a list of bookmarks for downloading
tones using the browser. To listen to the selected
tone, select Play. If you have two alternate phone
lines in use, you can specify a ringing tone for each
line.
•Video call tone — Select a ringing tone for video
calls. This option is available only if your device is
equipped to work within UMTS networks and you
have UMTS network coverage. See "UMTS
(3G)," p. 54.
•Say caller's name — Activate the text-to-speech
ringing tone feature. When someone from your
contacts list calls you, the device sounds a ringing
tone that is a combination of the spoken name of
the contact and the selected ringing tone.
•Ringing type — Select how you want the ringing
tone to alert.
•Ringing volume — Select the volume level of the
ringing tone.
•Message alert tone — Select a tone for received text
messages.
•E-mail alert tone — Select a tone for received e-mail
messages.
•Vibrating alert — Select whether you want the
device to vibrate when you receive a call.
•Keypad tones — Set the volume level of the device
keypad tones.
•Warning tones — Set the warning tones on or off.
•Alert for — You can set the device to ring only upon
calls from phone numbers that belong to a selected
contact group. Phone calls coming from outside that
group have a silent alert.
•Profile name — You can give a name to a new profile
or rename an existing profile. The Normal and
Offline profiles cannot be renamed.
The Offline profile prevents your device from
accidentally switching on, sending or receiving
messages, or using Bluetooth; it also closes any
Internet connection that may be in operation when
the profile is selected. The Offline profile does not
prevent you from establishing a wireless LAN
connection at a later time, so comply with any
applicable safety requirements when establishing
and using wireless LAN connections.
To change a profile, scroll to the desired profile in the
list, and select Options > Activate. If you select the
Offline profile, you cannot send or receive messages or
use WLAN to read your e-mails.
To create a new profile, select Options > Create new,
and define the settings.
Themes
Select Menu > Tools > Themes.
You can change the look of the display of your device.
To change the look of the display, highlight the theme
you want to use, and select Options > Apply.
To edit a theme, highlight the theme you want to edit,
and select Options > Edit. Select Wallpaper to change
the background image in the standby modes, or Power
saver to use a text or the date and time as a power saver
that appears on the display when no key presses have
been made for a some time.
15
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 15 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 15 Jan 29, 2007 12:37:36 PM
To download themes, you need to establish a network
connection that allows you to download themes from
Internet sources that are compatible with your device.
To download a theme, select Theme downloads. Enter
the link from which you want to download your theme.
Once the theme is downloaded you can preview,
activate, or edit it.
To preview a theme, highlight the theme you want to
preview, and select Options > Preview. Select Apply to
start using the new theme.
Search
Select Menu > Office > Search.
With Search, you can search for information in your
contacts, notes, calendar appointments, to-do notes, e-
mail messages, multimedia messages, and text
messages. You can also search for files by the file names
in your device memory and memory card.
1. Select the content types you want to search in. To
remove the selection, select it again. To include all
content types in your search, select Select all. To
remove all content types, select Unselect all.
2. Enter your search keywords or some part of the
keywords. To include two words in your search,
separate them with a space. You will only find items
that contain both keywords.
3. Select Search.
Tip: Wildcards may help you find items. In your
search keyword, use ? to substitute a single
character and * to substitute zero or more
characters. If you use the ? or * wildcard, you
must add * to the beginning and end of a
search keyword, for example, *s?all* ("shall")
or *dev*ment* ("development").
To view the search results from your previous search,
select Options > Previous results.
Notification light
You can set the notification light on the cover of your
device to blink when you have received a new message
or when you have missed a phone call.
To define the notification light settings, select Menu >
Tools > Settings > Phone > Notification light.
To set the time how long you want the notification light
to blink, scroll to Blink light for and press the scroll key.
To select whether you want to be notified of new short
messages, multimedia messages, e-mail messages, and
missed phone calls, scroll to Notified events and press
the scroll key.
16
Basic information about your device
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 16 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 16 Jan 29, 2007 12:37:36 PM
Transfer content between devices
You can transfer content, such as contacts, from a
compatible Nokia device to your Nokia E61i using
Bluetooth connectivity or infrared. The type of content
that can be transferred depends on the phone model.
If the other device supports synchronization, you can
also synchronize data between the other device and
your Nokia E61i.
Transfer data with
Bluetooth or infrared
Tip: If you transfer data from your previous
device, the device may require you to insert the
SIM card. Your Nokia E61i does not need a SIM
card when transferring data.
To start transferring data from a compatible device,
select Menu > Tools > Transfer > Transfer data.
Bluetooth connectivity
1. In the information view, select Continue.
2. Select Via Bluetooth. Both devices must support the
selected connection type.
3. Activate Bluetooth in your other device, and select
Continue in your Nokia E61i to start searching for
devices with active Bluetooth connectivity.
4. Select Stop in your Nokia E61i after it has found your
other device.
5. Select your other device from the list. You are asked
to enter a passcode (1 to 16 digits) on your Nokia
E61i. The passcode is used only once to confirm this
connection.
6. Enter the code on your Nokia E61i, and select OK.
Enter the passcode on your other device, and select
OK. The devices are now paired. See "Pair
devices," p. 57.
For some phone models, the Transfer data
application is sent to your other device as a
message. To install Transfer data on your other
device, open the message, and follow the
instructions on the display.
7. From your Nokia E61i, select the content you want
to transfer from your other device, and OK.
Infrared connectivity
1. In the information view, select Continue.
2. Select Via infrared. Both devices must support the
selected connection type.
3. Connect the two devices. See "Infrared," p. 59.
4. From your Nokia E61i, select the content you want
to transfer from your other device, and OK.
Content is copied from the memory of the other device
to the corresponding location in your device. Copying
time depends on the amount of data to be transferred.
You can also cancel and continue later.
17
Transfer content between devices
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 17 Jan 29, 2007 12:37:36 PM
The necessary steps for data transfer may vary
depending on your device, and whether you have
interrupted data transfer earlier. The items that you can
transfer vary depending on the other device.
Synchronize data with
another device
If you have previously transferred data to your Nokia
E61i, and your other device supports synchronization,
you can use Transfer to keep the data of the two devices
up to date.
1. Select Phones, and press the scroll key.
2. Scroll to the device from which you transferred data,
and press the scroll key.
3. Select Synchronize, and press the scroll key. The
devices start synchronizing using the same
connection type that you selected when you
originally transferred data. Only the data that you
originally selected for data transfer is synchronized.
To modify the data transfer and synchronization
settings, select Synchronize, scroll to a device, press the
scroll key, and select Edit.
18
Transfer content between devices
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 18 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 18 Jan 29, 2007 12:37:36 PM
Messages
Select Menu > Messag..
In Messaging (network service), you can send and
receive text messages, multimedia messages, and e-
mail messages. You can also receive web service
messages, cell broadcast messages, and special
messages containing data, and send service
commands.
Before sending or receiving messages, you may need to
do the following:
•Insert a valid SIM card in the device and be located
in a service area of the cellular network.
•Verify that the network supports the messaging
features you want to use and that they are activated
on your SIM card.
•Define Internet access point (IAP) settings on the
device. See "Access points," p. 90.
•Define e-mail account settings on the device. See "E-
mail account settings," p. 32.
•Define SMS settings on the device. See "Text message
settings," p. 31.
•Define MMS settings on the device. See "Multimedia
message settings," p. 31.
The device may recognize the SIM card provider and
automatically configure some of the message settings.
If not, you may need to define the settings manually, or
contact your service provider, network operator, or
Internet service provider to configure the settings.
Organize messages
To create a new folder to organize your messages,
select My folders > Options > New folder. Enter the
folder name, and select OK.
To rename a folder, select the folder and Options >
Rename folder. Enter the new folder name, and select
OK. You can only rename folders that you have created.
To move a message to another folder, open the
message, and select Options > Move to folder, the
folder, and OK.
To sort messages in a specific order, select Options >
Sort by. You can sort the messages by Date, Sender,
Subject, or Message type.
Search for messages
To search for a message, open the folder in which you
want to search, select Options > Find. Enter the search
term, and select OK.
E-mail messages
To receive and send mail, you must have a remote
mailbox service. This service may be offered by an
Internet service provider, a network service provider, or
your company. Your device is compliant with Internet
19
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 19 Jan 29, 2007 12:37:36 PM
standards IMAP4 (revision 1) and POP3, and a range of
e-mail solutions. Other e-mail providers may offer
services with different settings or features than those
described here.
Before you can send, receive, retrieve, reply to, and
forward mail on your device, you must also do the
following:
•Configure an Internet access point (IAP). Access
points may already be configured in your device. See
"Access points," p. 90.
•Set up an e-mail account, and define the e-mail
settings correctly. Depending on your device, you
can use the mailbox guide, settings wizard, or define
the settings manually.
Follow the instructions from your remote mailbox and
Internet service providers. Contact your network and
Internet service providers or operator for the correct
settings.
Set up your e-mail with the
mailbox guide
If you select Mailbox in the messaging main view and
have not set up your e-mail account, you are prompted
to do so. To start setting up the e-mail account with the
mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4 or POP3, and select
Next.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve
e-mail or Internet mail messages. IMAP4 is
a version of the Internet message access
protocol that lets you access and manage
e-mail messages while the messages are
still on the e-mail server. You can then
choose which messages to download to
your device.
3. In My e-mail address, enter your e-mail address.
Select Next.
4. In Incoming mail serv., enter the name of the
remote server that receives your e-mail, and select
Next.
5. In Outgoing mail serv., enter the name of the remote
server that sends your e-mail, and select Next.
Depending on your mobile operator, you might
have to use your mobile operator's outgoing mail
server instead of your e-mail provider's.
6. In Access point, select the Internet access point your
device should use when it retrieves the e-mails. If
you select Always ask, each time the device starts to
retrieve e-mail, it asks which Internet access point
it should use, but if you select an access point, the
device makes the connection automatically. Select
Next.
Tip: If you select Select group, the device
makes the connection automatically using
the best available Internet access point
from the access point group. Select the
access point group and Back to save the
selection.
7. Enter a name for your new mailbox, and select
Finish.
20
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 20 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 20 Jan 29, 2007 12:37:36 PM
When you create a new mailbox, the name you give to
the mailbox replaces Mailbox in the Messag. main view.
Select your default mailbox
If you have defined several mailboxes, you can select
one of them as your default mailbox. To define the
default mailbox, select Options > Settings > E-mail >
Default mailbox and the mailbox.
If you have defined several mailboxes, you must select
the mailbox that you want to use every time you start
composing a new e-mail message.
Configure the e-mail key
Your device has an e-mail key. With the e-mail key, you
can access your default e-mail inbox or open your
default e-mail editor from the active standby. The
functionality depends also on your mailbox service
provider.
To configure the e-mail key, select Menu > Tools > E-
mail key. Select the e-mail account that you want to use
with the e-mail key.
Connect to mailbox
E-mail addressed to you is not automatically received
by your device, but by your remote mailbox. To read
your e-mail, you must first connect to the remote
mailbox and retrieve the e-mails to your device.
To retrieve received e-mail messages to your device,
select your mailbox in the Messag. main view. When the
device asks Connect to mailbox?, select Yes.
To view e-mail messages in a folder, scroll to the folder,
and press the scroll key. Scroll to a message, and press
the scroll key.
To retrieve e-mail messages to your device, select
Options > Retrieve e-mail > New to retrieve new
messages that you have neither read nor retrieved,
Selected to retrieve only messages you select from the
remote mailbox, or All to retrieve all messages not
previously retrieved.
To disconnect from a remote mailbox, select Options >
Disconnect.
View e-mail offline
Working offline means that your device is not
connected to a remote mailbox. Managing your e-mail
offline enables you to save in connection costs and work
in conditions that do not allow a data connection. Any
changes you make in the remote mailbox folders while
offline take effect in your remote mailbox the next time
you go online and synchronize. For example, if you
delete an e-mail from your device when offline, the e-
mail is deleted from the remote mailbox the next time
you connect to the mailbox.
1. Select Messag. > Options > Settings > E-mail.
Select the e-mail account, and press the scroll key.
Select Retrieval settings > E-mail to retrieve >
Msgs. & attachs. to retrieve entire messages with
their attachments to your device.
2. Open your mailbox, and select Options > Retrieve
e-mail. Select New to retrieve new messages that
you have neither read nor retrieved, Selected to
retrieve only messages you select from the remote
21
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 21 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 21 Jan 29, 2007 12:37:36 PM
mailbox, or All to retrieve all messages not
previously retrieved. The device goes online and
connects to the mailbox to retrieve the mails.
3. After retrieving the e-mails, select Options >
Disconnect to return to the offline mode.
4. To view an e-mail message, scroll to it, and press the
scroll key.
Some options require you to connect to your remote
mailbox.
Tip: To subscribe to other folders in your
remote mailbox, select E-mail settings >
Retrieval settings > Folder subscriptions. E-
mail in all subscribed folders is updated when
you retrieve e-mail from your remote mailbox.
Read and reply to e-mail
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
To read a received e-mail, scroll to the e-mail, and press
the scroll key.
To search for an e-mail in your mailbox, select Options >
Find. Enter the search term, and select OK.
To open an attachment, select Options >
Attachments. Scroll to the attachment, and press the
scroll key.
To reply only to the sender of an e-mail, open the e-mail,
and select Options > Reply > To sender.
To reply to all recipients of an e-mail, open the e-mail,
and select Options > Reply > To all.
Tip: If you reply to an e-mail that contains
attached files, the attachments are not
included in the reply. If you forward the
received e-mail, attachments are included.
To delete an attachment from an e-mail that you are
sending, select the attachment and Options >
Remove.
To set the message priority, select Options > Sending
options > Priority and from the available options.
To call the sender of the e-mail, open the e-mail, and
select Options > Call.
To reply to the sender of the e-mail with a text message
or multimedia message, open the e-mail, and select
Options > Create message.
To forward an e-mail, open the e-mail, and select
Options > Forward.
Delete messages
To free up memory space on your device, regularly
delete messages from the Inbox and Sent folders, and
delete retrieved e-mail messages.
To delete a message, scroll to it, and press the
backspace key.
You can select to delete local e-mail messages on the
device and keep the original on the server, or you can
delete both the local e-mail messages on the device and
the original messages on the server.
22
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 22 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 22 Jan 29, 2007 12:37:36 PM
To delete e-mails from the device only, select Options >
Delete > Phone (header remains).
To delete e-mail both from the device and from the
remote server, open an e-mail, and select Options >
Delete > Phone and server.
E-mail folders
If you create subfolders in your IMAP4 mailboxes on a
remote server, you can view and manage these folders
with your device. You can only subscribe to folders in
your IMAP4 mailboxes. Subscribing to folders in a
remote mailbox allows you to view those folders on
your device.
To view folders in your IMAP4 mailbox, establish a
connection, and select Options > E-mail sett. >
Retrieval settings > Folder subscriptions.
To view a remote folder, select a folder and Options >
Subscribe. Every time you go online, the subscribed
folders are updated. This may take some time if the
folders are large.
To update the list of folders, select a folder and
Options > Update folder list.
Write and send e-mail
To write an e-mail, select Options > Add recipient to
select the recipients' e-mail addresses from the
contacts list, or enter the e-mail addresses in the To
field. Use a semicolon to separate entries. Scroll down,
and use the Cc field to copy other recipients, or the
Bcc field to blind copy recipients. In the Subject field,
enter the subject of the e-mail. Enter your e-mail
message in the text area, and select Options > Send.
To attach a file to an e-mail, select Options > Insert and
the attachment you want to add. You can insert images,
sound clips, notes, and other files, such as office files.
To set the sending time for an e-mail message, select
Options > Sending options > Send message. Select
Immediately or When conn. avail. if you are working
offline.
E-mail messages are stored in the Outbox before
sending. Unless the e-mail is sent immediately, you can
open the Outbox and suspend and resume sending or
view the e-mail.
Text messages
Your device supports the sending of text messages
beyond the character limit for a single message. Longer
messages are sent as a series of two or more messages.
Your service provider may charge accordingly.
Characters that use accents or other marks, and
characters from some language options, take up more
space, limiting the number of characters that can be
sent in a single message.
Write and send text messages
Select Menu > Messag. > New message > Text
message.
1. In the To field, press the scroll key to select
recipients from Contacts, or enter the recipients'
mobile phone numbers manually. If you enter more
23
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 23 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 23 Jan 29, 2007 12:37:36 PM
than one number, separate the numbers with a
semicolon.
2. Enter the text of the message. To use a template,
select Options > Insert > Template.
3. Select Options > Send to send the message.
Reply to received text messages
To reply to a text message, open the message from the
Inbox. Select Options > Reply. Enter the text of the
message, and select Options > Send.
To call the sender of a text message, open the message
from the Inbox, and select Options > Call.
Text messages on the SIM card
Text messages may be stored on your SIM card. Before
you can view SIM messages, you must copy the
messages to a folder in the device. After copying the
messages to a folder, you can view them in the folder
or delete them from the SIM card.
Select Options > SIM messages.
1. Select Options > Mark/Unmark > Mark or Mark all
to mark every message.
2. Select Options > Copy.
3. Select a folder and OK to begin copying.
To view SIM card messages, open the folder where you
copied the messages, and open a message.
To delete a text message from the SIM card, select the
message, and press the backspace key.
Picture messages
Note: The picture message function can be used
only if it is supported by your service provider. Only
compatible devices that offer picture message features
can receive and display picture messages. The
appearance of a message may vary depending on the
receiving device.
Select Menu > Messag..
To view a picture message, open the message from the
Inbox folder.
Forward picture messages
1. In the Inbox, open a picture message and select
Options > Forward.
2. In the To field, enter a recipient's number, or press
the scroll key to add a recipient from Contacts. If you
enter more than one number, separate the numbers
with a semicolon.
3. Enter the text of your message. The text can have
120 characters. To use a template, select Options >
Insert > Template.
4. To send the message, press the call key.
Tip: To remove the picture from the message,
select Options > Remove picture.
24
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 24 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 24 Jan 29, 2007 12:37:36 PM
Multimedia messages
A multimedia message (MMS) can contain text and
objects such as images, sound clips, or video clips.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of
a message may vary depending on the receiving device.
Before you can send or receive multimedia messages
on your device, you must define the multimedia
message settings. Your device may have recognized the
SIM card provider and automatically configured the
multimedia message settings. If not, contact your
service provider. See "Multimedia message
settings," p. 31.
Create and send multimedia
messages
Select New message > Multimedia message.
1. In the To field, press the scroll key to select
recipients from Contacts, or enter the recipients'
mobile phone numbers or e-mail addresses
manually.
2. In the Subject field, enter a subject for the message.
To change the fields that are visible, select Options >
Address fields.
3. Enter the text of the message, and select Options >
Insert object to add media objects. You can add
objects such as Image, Sound clip, or Video clip.
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit,
the device may make it smaller so that it can be sent
by MMS.
4. Each slide of your message can contain only one
video or audio clip. To add more slides to your
message, select Options > Insert new > Slide. To
change the order of slides in your message, select
Options > Move.
5. To preview a multimedia message before sending
it, select Options > Preview.
6. Press the scroll key to send the multimedia
message.
Create presentations
Select New message > Multimedia message.
1. In the To field, press the scroll key to select
recipients from Contacts, or enter the recipients'
mobile phone numbers or e-mail addresses
manually.
2. Select Options > Create presentation and a
presentation template.
Tip: A template may define which media
objects you can include in the presentation,
where they appear, and which effects are
displayed between images and slides.
3. Scroll to a text area and enter the text.
4. To insert images, sound, video, or notes in your
presentation, scroll to the corresponding object
area, and select Options > Insert.
Tip: To move between object areas, scroll
up and down.
25
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 25 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 25 Jan 29, 2007 12:37:36 PM
5. To add slides, select Insert > New slide.
6. Select Options and from the following:
•Preview — See what your multimedia presentation
looks like when it is opened. Multimedia
presentations may only be viewed in compatible
devices that support presentations. They may
appear different in different devices.
•Backgrnd. settings — Select the background color for
the presentation and background images for
different slides.
•Effect settings — Select effects between images or
slides.
Creating multimedia presentations is not possible if
MMS creation mode is Restricted. To change MMS
creation mode, select Messag. > Options > Settings >
Multimedia message.
The available options may vary.
To send your multimedia presentation, press the scroll
key.
Tip: To save the message in Drafts without
sending it, select Done.
Receive and reply to multimedia
messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your
device or PC.
Before you can send or receive multimedia messages
on your device, you must define the multimedia
message settings. Your device may have recognized the
SIM card provider and automatically configured the
multimedia message settings. If not, contact your
service provider. See "Multimedia message
settings," p. 31.
If you receive multimedia messages containing objects
unsupported by your device, you cannot open them.
1. To reply to a multimedia message, open the
message from the Inbox, and select Options >
Reply.
2. Select Options > To sender to reply to the sender
with a multimedia message or Options > Via text
message to reply to the sender with a text message.
3. Enter the text of the message, and press the scroll
key to send it.
View presentations
Open the Inbox, scroll to a multimedia message that
contains a presentation, and press the scroll key. Scroll
to the presentation, and press the scroll key.
To pause the presentation, press either selection key
below the display.
After you pause the presentation or playing finishes,
select Options and from the following:
•Open link — Open a Web link and browse the Web
page.
•Activate scrolling — Scroll text or images too large
to fit on the display.
•Continue — Resume playing the presentation.
26
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 26 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 26 Jan 29, 2007 12:37:36 PM
•Play — Replay the presentation from the start.
•Find — Find phone numbers and e-mail or Web
addresses the presentation may contain. You may
use these numbers and addresses to make calls, send
messages, or create bookmarks, for example.
The available options may vary.
View media objects
Open the Inbox, scroll to a received multimedia
message and press the scroll key. Select Options >
Objects.
To view or play a media object, scroll to it, and press the
scroll key.
Media objects and message attachments may contain
viruses or other harmful software. Do not open any
objects or attachments unless you are sure of the
trustworthiness of the sender.
To save a media object in its corresponding application,
scroll to the object, and select Options > Save.
To send a media object to compatible devices, scroll to
it, and select Options > Send.
Tip: If you receive multimedia messages that
contain media objects your device cannot
open, you may be able to send these objects to
another device such as a computer.
Instant messaging
Select Menu > Connect. > IM.
Instant messaging (IM) (network service) allows you to
converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain IM servers that you
can log in to after you register to an IM service. Service
providers may differ in their support of features.
If IM is not available from your wireless service provider,
it may not appear in the menu of your device. Contact
your service provider for more information about
signing up for IM services and costs for services. For
more information on the availability of IM settings,
contact your network operator, service provider, or
dealer.
You may receive the settings in a special text message
from the network operator or service provider that
offers the IM service. You must save the settings to
access the service that you want to use. You can also
enter the settings manually.
Connect to an IM server
To converse with an IM user or users, and to view and
edit your IM contacts, you must log into the instant
messaging server. Open IM, and select Options >
Login. Enter your user ID and password, and press the
scroll key to log in. You can obtain the user name,
password, and other settings to log in from your service
provider when you register for the service.
Search IM users or IM groups
To search for IM users and user IDs, select IM contacts >
Options > New IM contact > Search. You can search by
27
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 27 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 27 Jan 29, 2007 12:37:36 PM
User's name, User ID, Phone number, and E-mail
address.
To search for IM groups and group IDs, select IM
groups > Options > Search. You can search by Group
name, Topic, and Members (user ID).
Conversations with a single IM
user
The Conversations view shows a list of the individual
conversation participants with whom you have an
ongoing conversation. Ongoing conversations are
automatically closed when you exit IM.
To view a conversation, scroll to a participant, and press
the scroll key.
To continue the conversation, enter your message, and
press the scroll key.
To return to the conversations list without closing the
conversation, select Back. To close the conversation,
select Options > End conversation.
To start a new conversation, select Options > New
conversation. You can start a new conversation with a
different contact while you are inside another active
conversation. However, you cannot have two active
conversations with the same contact.
To insert an image to an instant message, select
Options > Send image, and select the image you want
to send.
To save a conversation participant to your IM contacts,
select Options > Add to IM contacts.
To save a conversation, while in the conversation view,
select Options > Record chat. The conversation is saved
as a text file that can be opened and viewed in the
Notes application.
To send automatic replies to incoming messages, select
Options > Set auto reply on. You can still receive
messages.
IM groups
The IM groups view shows a list of the IM groups that
you have saved or to which you are currently joined.
IM groups is available only if you logged into an IM
server when you opened the IM application, and the
server supports IM groups.
To create an IM group, select Options > Create new
group.
To join an IM group or to continue a group conversation,
scroll to the group, and press the scroll key. Enter a
message, and press the call key to send it.
To join an IM group that is not on the list, but for which
you know the group ID, select Options > Join new
group.
To leave the IM group, select Options > Leave IM
group.
To remove an IM group, press the backspace key.
Ban from groups
Scroll to the IM group, and select Options > Group >
Settings > Banned list.
28
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 28 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 28 Jan 29, 2007 12:37:36 PM
To prevent IM users from joining the group, select
Options > Add to banned list and from the following:
•From IM contacts — Ban one or several of your IM
contacts.
•Enter user ID — Enter the ID of the IM user.
To allow a banned user to join the group, select
Options > Remove.
IM contacts
When login to an IM service is complete, your contact
list for the service provider is retrieved automatically. If
your contact list is not available, wait a few minutes and
try to retrieve your contacts list manually.
Tip: The online status of your IM contacts is
shown by an indicator next to the contact
name.
To create an IM contact card, select Options > New IM
contact. Enter the user ID and a nickname, and select
Done. The user ID can be up to 50 characters, and the
IM service provider may require the user ID to be in the
username@domain.com format. The nickname is
optional.
To view a different list of your IM contacts, select
Options > Change contact list.
Scroll to an IM contact, select Options and from the
following:
•Open conversation — Start or continue instant
messaging with the contact.
•Contact details — View the contact card.
•Editing options — Edit or delete the contact card,
move it to another contact list, or receive a note
when the contact's online status changes.
•Belongs to groups — See the IM groups the contact
has joined.
•New contact list — Create a contact list for a specific
group of IM contacts.
•Reload users' availab. — Update the online status of
your IM contacts.
•Blocking options — Prevent or allow the reception
of messages from the contact.
•Login — Connect to an instant messaging server if
you did not log in when you opened the application.
•Logout — Disconnect from the IM server.
•Settings — Edit instant messaging application or
server settings.
The available options may vary.
To delete an IM contact, press the backspace key.
Blocked contacts
Select IM contacts > Options > Blocking options >
View blocked list.
To find a blocked IM user, enter the first letters of the
user's name. Matching names appear in a list.
To allow receiving messages from a blocked IM user,
select Options > Unblock.
To prevent receiving messages from other IM users,
select Options > Block new contacts. Select the IM user
from your IM contacts, or enter the user ID.
29
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 29 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 29 Jan 29, 2007 12:37:36 PM
Settings
Select Options > Settings > IM settings.
Select from the following settings:
•Use screen name — To change the name that
identifies you in IM groups, select Yes.
•Allow messages from — Select to receive instant
messages from all other IM users, your IM contacts
only, or not to receive messages at all.
•Allow invitations from — Select to receive
invitations to IM groups from all IM users, your IM
contacts only, or not to receive invitations at all.
•Msg. scrolling speed — To decrease or increase the
speed at which new messages are displayed, scroll
left or right.
•Sort IM contacts — Select to list your IM contacts
alphabetically or by their online status.
•Availabil. reloading — To update the online status
of your IM contacts automatically, select Automatic.
•Offline contacts — Select if IM contacts with an
offline status are shown in the IM contacts list.
The settings available for editing may vary. Contact your
service provider for more information.
IM server settings
Select Options > Settings > Server settings.
Scroll to the following options, and press the scroll key
to configure your IM server:
•Servers — Add new, edit, or delete servers.
•Default server — Change the server to which your
device automatically logs into, scroll to the desired
server, and press the scroll key.
•IM login type — To establish a connection between
your device and the default server automatically,
select Automatic. Select Auto. in home network to
automate the connection when in your home
network. Select On app. start-up to connect to the
server when you open the messaging application.
Select Manual to connect to the server manually at
any time.
Special messages
Your device can receive many kinds of messages that
contain data:
•Operator logo — To save the logo, select Options >
Save.
•Ringing tone — To save a ring tone, select Options >
Save.
•Configuration message — You may receive settings
from your network operator, service provider, or
company information management department in
a configuration message. To accept the settings,
open the message, and select Options > Save all.
•E-mail notification — The note tells you how many
new e-mails you have in your remote mailbox. An
extended notification may list more detailed
information.
Send service commands
Send a service request message to your service provider
and request activation for certain network services.
30
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 30 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 30 Jan 29, 2007 12:37:36 PM
To send a service request to your service provider, select
Options > Service command. Enter the service request
as a text message, and select Options > Send.
Message settings
Fill in all fields marked with Must be defined or with a
red asterisk.
Your device may recognize the SIM card provider and
automatically configure the correct text message,
multimedia message, and GPRS settings. If not, contact
your service provider for the correct settings, order the
settings from your service provider in a configuration
message, or use the Settings wizard application.
Text message settings
Select Options > Settings > Text message.
Define the following:
•Message centers — View the available message
centers for your device.
•Msg. center in use — Select a message center to send
the message.
•Character encoding — Select Reduced support to use
automatic character conversion to another
encoding system when available.
•Receive report — Select Yes if you want the network
to send you delivery reports on your messages
(network service).
•Message validity — Select the length of time that the
message center continues to resend your message
if the first attempt fails (network service). If the
recipient cannot be reached within the validity
period, the message is deleted from the message
center.
•Message sent as — Convert the message to another
format, such as Text, Fax, Paging or E-mail. Change
this option only if you are sure that your message
center is able to convert text messages into these
other formats. Contact your network operator.
•Preferred conn. — Select the preferred method of
connection when sending text messages from your
device.
•Reply via same ctr. — Select whether you want the
reply message to be sent using the same text
message center number (network service).
Multimedia message settings
Select Options > Settings > Multimedia message.
Define the following settings:
•Image size — Select Small or Large to scale images
in multimedia messages. Select Original to maintain
the original image size of multimedia messages.
•MMS creation mode — Select Restricted to have your
device prevent you from including content in
multimedia messages that may not be supported by
the network or the receiving device. To receive
warnings about including such content, select
Guided. To create a multimedia message with no
restrictions on attachment type, select Free. If you
select Restricted, creating multimedia presentations
is not possible.
•Access point in use — Select the default access point
to connect to the multimedia message center. You
31
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 31 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 31 Jan 29, 2007 12:37:36 PM
may not be able to change the default access point
if it is preset in your device by your service provider.
•Multimedia retrieval — Select Always automatic to
always receive multimedia messages automatically,
Auto. in home network to receive notification of a
new multimedia message that you can retrieve from
the message center (for example, when you are
traveling abroad and are outside your home
network), Manual to retrieve multimedia messages
from the message center manually, or Off to prevent
receipt of any multimedia messages.
•Allow anon. msgs. — Select whether you want to
receive messages from unknown senders.
•Receive ads — Select whether you want to receive
messages defined as advertisements.
•Receive report — Select Yes to have the status of the
sent message to be shown in the log (network
service). Receiving a delivery report of a multimedia
message that has been sent to an e-mail address
may not be possible.
•Deny report sending — Select Yes to not send
delivery reports from your device for received
multimedia messages.
•Message validity — Select the length of time that the
message center continues to resend your message
if the first attempt fails (network service). If the
recipient of a message cannot be reached within the
validity period, the message is removed from the
multimedia messaging center. Maximum time is the
maximum amount of time allowed by the network.
E-mail account settings
Select Menu > Messag. > Options > Settings > E-
mail.
If you have not defined a mailbox yet, select Mailbox in
use, and press the scroll key. The mailbox guide opens
and helps you set up your e-mail account.
If you have defined a mailbox, select the mailbox, and
press the scroll key to edit the settings.
The settings available for editing may vary. Some
settings may be preset by your service provider.
Settings for the received e-mail
Select Incoming e-mail and from the following settings:
•User name — Enter the user name for the e-mail
service.
•Password — Enter the password for the e-mail
service.
•Incoming mail serv. — Enter the IP address or host
name of the server that receives your e-mail.
•Access point in use — Select the Internet access point
that the device uses for retrieving the e-mail
messages that you receive.
•Mailbox name — Enter a name for the mailbox.
•Mailbox type — Select the mailbox protocol that your
remote mailbox service provider recommends. The
options are POP3 and IMAP4. This setting can be
selected only once and cannot be changed if you
have saved or exited from the mailbox settings. If
you use the POP3 protocol, e-mail messages are not
updated automatically when you are online. To see
the latest e-mail messages, you must disconnect and
make a new connection to your mailbox.
32
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 32 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 32 Jan 29, 2007 12:37:36 PM
•Security (ports) — Select the security option used to
increase the security of the connection.
•Port — Define a port for connection.
•APOP secure login (for POP3 only) — Use with the
POP3 protocol to encrypt the sending of passwords
to the remote e-mail server while connecting to the
mailbox.
Settings for sent e-mail
Select Outgoing e-mail and from the following settings:
•My e-mail address — Enter the e-mail address given
to you by your service provider. Replies to your
messages are sent to this address.
•User name — Enter the user name for the e-mail
service.
•Password — Enter the password for the e-mail
service.
•Outgoing mail serv. — Enter the IP address or host
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
•Access point in use — Select the Internet access point
that the device uses for sending the e-mail messages
that you send.
•Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
•Port — Define a port for connection.
User settings
Select User settings and from the following settings:
•My name — Enter a name to appear before your e-
mail address when you send e-mail.
•Reply-to — Select whether you want replies to be
redirected to a different address. Select On, and enter
the e-mail address to which you want to direct the
replies. You can only enter one address.
•Delete e-mails from — Select whether you want to
delete the e-mails only from the device or from both
the device and the server. Select Always ask if you
want to confirm from where the e-mail should be
deleted every time you delete an e-mail.
•Send message — Select to send the e-mail as soon
as possible, to send it the next time you retrieve e-
mail, or to store the e-mail in the outbox, from where
you can send it later.
•Send copy to self — Select whether you want to save
a copy of the e-mail to your remote mailbox and to
the address defined in My e-mail address in the
settings for Outgoing e-mail.
•Include signature — Select whether you want to
attach a signature to your e-mail messages.
•New e-mail alerts — Select whether you want to
receive the new e-mail indications (a tone and a
note) when new mail is received to the mailbox.
•Flash on new e-mails — Select how long you want
the notification light to blink when you receive a
new e-mail, or whether you want the notification
light to blink at all.
Retrieval settings
Select Retrieval settings and from the following
settings:
•E-mail to retrieve (for POP3 mailboxes only) — Select
whether you want to retrieve only the e-mail header
information such as sender, subject and date, e-mail,
or e-mail with attachments.
33
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 33 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 33 Jan 29, 2007 12:37:36 PM
•Retrieval amount — Select the number of e-mails
you want to retrieve from the remote server to your
mailbox.
•IMAP4 folder path (for IMAP4 mailboxes
only) — Define the folder path for folders to be
subscribed.
•Folder subscriptions (for IMAP4 mailboxes
only) — Subscribe to other folders in the remote
mailbox and retrieve content from those folders.
Automatic retrieval settings
Select Automatic retrieval and from the following
settings:
•Header retrieval — Select whether you want to
receive notifications when new e-mail is received in
your remote mailbox. Select Always enabled to
always automatically retrieve new e-mail messages
from your remote mailbox, or Only in home net. to
automatically retrieve new e-mail messages from
your remote mailbox only when you are in your
home network and not, for example, traveling.
•Retrieval days — Select the days on which e-mails
are retrieved to your device.
•Retrieval hours — Define the hours between which
the e-mails are retrieved.
•Retrieval interval — Select the time interval between
retrieving new e-mails.
Other settings
Select Menu > Messag. > Options > Settings >
Other.
Select from the following:
•Save sent messages — Select whether to store sent
messages in the Sent folder.
•No. of saved msgs. — Enter the number of sent
messages that you want to save. When the limit is
reached, the oldest message is deleted.
•Folder view — Define whether you want the list of
messages in the folders to be shown on one row or
two rows.
•Memory in use — Select where to save your received
messages. You can save messages to memory card
only if a memory card is inserted.
The settings available for editing may vary.
34
Messages
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 34 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 34 Jan 29, 2007 12:37:36 PM
Telephone
When the device is locked, calls may be possible to the
official emergency number programmed into your
device.
To make and receive calls (network service), the device
must be switched on, the device must have a valid SIM
card installed, and you must be located in a service area
of the cellular network. The GPRS connection is put on
hold during voice calls unless the network supports
dual transfer mode or you have a USIM card and are
within the coverage of a UMTS network.
Make a call
Important: If the device has been locked, enter
the lock code to activate the phone function. When the
device is locked, calls may be possible to the official
emergency number. Making an emergency call in the
offline profile or when the device is locked requires that
the device recognize the number to be an official
emergency number. It is advisable to change the profile
or unlock the device by entering the lock code before
you make the emergency call.
Enter the phone number, including the area code, and
press the call key. If you enter an incorrect character,
press the backspace key. To end the call or cancel the
call attempt, press the end key.
To make a call using the saved contacts, press the
contacts key. Enter the first letters of the name, scroll to
the name, and press the call key. See
"Contacts," p. 46.
Press the call key to view up to 20 numbers that you last
called or attempted to call. Scroll to the desired number
or name, and press the call key to dial the number. See
"Log," p. 45.
Use the volume keys to adjust the volume of an active
call.
To call your voice mailbox (network service) in standby
mode, press and hold 1, or press 1 then the call key.
1-touch dial
1-touch dialing allows you to make a call by pressing
and holding a number key.
Before using 1-touch dialing, select Menu > Tools >
Settings > Call > 1-touch dialing > On.
To assign a number key to a phone number, select
Menu > Tools > 1-touch. Scroll to the number key (2 -
9) on the screen, and select Options > Assign. Select the
desired number from the Contacts directory.
To remove the phone number assigned to a number
key, scroll to the 1-touch dialing key, and select
Options > Remove.
To change a phone number assigned to a number key,
scroll to the 1-touch dialing key, and select Options >
Change.
35
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 35 Jan 29, 2007 12:37:36 PM
Answer a call
To answer a call, press the call key.
To decline the call, press the end key.
To mute a ringing tone instead of answering a call,
select Silence.
To answer a new call during a call when the Call
waiting function is activated, press the call key. The first
call is put on hold. To end the active call, press the end
key.
Forward calls
Select Menu > Tools > Settings > Call forwarding.
Forward incoming calls to your voice mailbox or to
another phone number. For details, contact your service
provider.
1. Select a call type from the following:
•Voice calls — Incoming voice calls.
•Data and video calls — Incoming data and video
calls. Video calls are available only if your device
is equipped to work within UMTS networks and
you have UMTS network coverage. See "UMTS
(3G)," p. 54.
•Fax calls — Incoming fax calls.
2. Select one of the following call forwarding options:
•All voice calls, All data and vid. calls, or All fax
calls. — Forward all incoming voice, data and
video, or fax calls.
•If busy — Forward incoming calls when you have
an active call.
•If not answered — Forward incoming calls after
your device rings for a specified period of time.
Define the time you let the device ring before
forwarding the call in the Delay time: field.
•If out of reach — Forward calls when the device
is switched off or out of network coverage.
•If not available — Activate the last three settings
at the same time. This option forwards calls if
your device is busy, not answered, or out of
reach.
3. Select Activate.
To check the current forwarding status, scroll to the
forwarding option, and select Options > Check status.
To stop forwarding voice calls, scroll to the forwarding
option, and select Options > Cancel.
Call restriction and call forwarding cannot be active at
the same time.
Call restriction
When calls are restricted, calls may be possible to the
official emergency number programmed into your
device.
Select Menu > Tools > Settings > Call restriction.
You can restrict the calls that can be made or received
with the device (network service). To change the
settings, you need the restriction password from your
service provider. Call restriction affects all calls,
including data calls. Call restriction and call forwarding
cannot be active at the same time.
36
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 36 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 36 Jan 29, 2007 12:37:36 PM
To restrict calls, select Cellular call restriction, and select
from the following options:
•Outgoing calls — Prevent making voice calls with
your device.
•Incoming calls — Restrict incoming calls.
•International calls — Prevent calling to foreign
countries or regions.
•Incoming if roaming — Restrict incoming calls when
outside your home country.
•Intern. except home — Prevent calls to foreign
countries or regions, but allow calls to your home
country.
To check the status of voice call restriction, scroll to the
restriction option, and select Options > Check status.
To stop all voice call restrictions, scroll to a restriction
option, and select Options > Cancel all restrict..
Net call restriction
To restrict net calls, select Menu > Tools > Settings >
Call restriction > Internet call restriction.
To reject net calls from anonymous callers, select
Anonymous calls > On.
Video calls
To be able to make a video call, your device must be
equipped to work within UMTS networks and you must
be within coverage of a UMTS network. See "UMTS
(3G)," p. 54.
For availability of and subscription to video call services,
contact your network operator or service provider.
While talking, you can send a real-time video to the
recipient's compatible mobile phone and see a real-
time video sent by the recipient, if the recipient has a
compatible mobile phone with a video camera. A video
call can only be made between two parties.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To make a video call, enter the phone number or select
the recipient of the call from Contacts, and select
Options > Call > Video call. You cannot convert the
video call to a normal voice call.
To answer a video call, press the call key. If Allow video
image to be sent to caller? is shown on the display,
select Yes to send a video to the caller or No to disable
video sending.
Tip: In case you do not want to send a video
during video calls, you can send a still image
instead. Select the still image to be sent in
Menu > Tools > Settings > Call > Image in
video call > Use selected.
During the call, select Options and from the following:
•Audio — Talk to the recipient of the call.
•Use video — See video without audio.
•Loudsp. — Select to use the loudspeaker for
receiving audio.
•Handset — Mute the loudspeaker and use the
handset.
37
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 37 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 37 Jan 29, 2007 12:37:36 PM
Push to talk
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, they will not appear on your device menu. Your
device may also have been specially configured. This
configuration may include changes in menu names,
menu order, and icons. Contact your service provider for
more information.
Select Menu > Connect. > PTT.
Push to talk (PTT) (network service) provides direct
voice communication connected with the push of a key.
With push to talk, you can use your device as you would
use a walkie-talkie.
You can use push to talk to have a conversation with
one person or with a group of people, or to join a
channel. A channel is like a chat room: you can call the
channel to see if anyone is online. The channel call does
not alert the other participants; the participants just
join the channel and start speaking with each other.
In push to talk communication, one person talks while
the other participants listen through the built-in
loudspeaker. Participants take turns responding to
each other. Because only one participant can talk at a
time, the maximum duration of a speech turn is limited.
For details of the speech turn duration for your network,
contact your network operator or service provider.
Remember to hold the device in front of you during a
push to talk call so you can see the display. Speak
towards the microphone, and do not cover the
loudspeaker with your hands.
Phone calls always take priority over push to talk.
Before you can use push to talk, you must define the
push to talk access point and push to talk settings. You
may receive the settings in a special text message from
the service provider that offers the push to talk service.
User settings
Select Options > Settings > User settings.
Define the following:
•Incoming PTT calls — Select Notify if you want to see
a notification of incoming calls. Select Auto-accept if
you want push to talk calls to be answered
automatically. Select Not allowed if you want push
to talk calls to be rejected automatically.
•PTT call alert tone — Select Set by profile if you want
the incoming call alert setting for push to talk to
follow your profile settings. If your profile is silent,
you are not available to others using push to talk,
except for callback requests.
•Callback request tone — Define the ringing tone for
callback requests.
•Application start-up — Select if you want to log in to
the push to talk service when you switch on your
device.
•Default nickname — Enter your default nickname
(20 characters maximum) that is displayed to other
users.
•Show my PTT address — Define if you want callers
to see your push to talk address. You can let all callers
see the address, show the address only to one-to-
one callers or channel participants, or hide the
address from all callers.
•Show my login status — Define whether your login
to the push to talk server is shown or hidden from
other users.
38
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 38 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 38 Jan 29, 2007 12:37:36 PM
Connection settings
Select Options > Settings > Connection settings.
Define the following:
•Domain — Enter the domain name obtained from
your service provider.
•Access point name — Select the push to talk access
point.
•Server address — Enter the IP address or domain
name of the push to talk server obtained from your
service provider.
•User name — Enter your user name obtained from
your service provider.
•Password — Enter a password, if required, to log into
the push to talk service. The password is provided by
the service provider.
Log in to push to talk service
If you have set Application start-up on in User
settings, push to talk automatically logs in to the service
when started. If not, you must log in manually.
To log in to a push to talk service, select Options >
Settings > Connection settings, and enter your User
name, Password, Domain, Server address, and Access
point name. Select Options > Switch PTT on.
When the Ringing type setting of your device is set to
Beep once or Silent, or there is an ongoing phone call,
you cannot make or receive push to talk calls.
Push to talk calls
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Select Options > PTT contacts.
To make a push to talk call, select one or several
contacts from the list, and press the voice key.
Remember to hold the device in front of you during a
push to talk call so you can see the display. The display
informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the
loudspeaker with your hands. Press and hold the voice
key the entire time you are talking. When you have
finished talking, release the key.
To end the push to talk call, press the end key.
When you receive a push to talk call, press the call key
to answer the call or the end key to dismiss the call.
Callback requests
To send a callback request, select Options > PTT
contacts, scroll to the desired contact, and select
Options > Send callback request.
To answer a callback request, select Show to open the
callback request. To make a push to talk call to the
sender, press the voice key.
39
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 39 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 39 Jan 29, 2007 12:37:36 PM
Contacts view
To view, add, modify, delete, or call contacts, select
Options > PTT contacts. A list of names from the
Contacts of your device is displayed with information
about their login status.
To call a selected contact, select Options > Talk 1 to 1.
To make a group call, select Options > Make PTT group
call.
To send the contact a request to call you, select
Options > Send callback request.
Create a channel
A channel is like a chat room: you can call the channel
to see if anyone is online. The channel call does not alert
the other participants; the participants just join the
channel and start speaking with each other.
To create a channel, select Options > New channel >
Create new.
Select Options and define the following:
•Channel name — Write the channel name.
•Channel privacy — Select Private or Public.
•Nickname in channel — Enter your nickname (20
characters maximum) that is displayed to other
users.
•Channel thumbnail — Insert a picture that describes
the channel.
To delete a channel, press the backspace key.
When you log in to push to talk, push to talk
automatically connects to the channels that were active
when the application was last closed.
Register PTT channels
To register a channel to the push to talk service, select
Options > Register.
To edit the channel details, select Options > Edit.
Participant details
To view the currently active participants of a channel,
select Options > Active members.
To view more information about a selected participant,
select Options > Contact details.
To call a selected contact, select Options > Talk 1 to 1.
To make a group call, select Options > Make PTT group
call.
To send the contact a request to call you, select
Options > Send callback request.
To add a contact to Contacts, select Options > Add to
Contacts.
Join a channel
To join a channel, select Options > PTT channels. Select
the channel you want to talk to, and press the voice key.
Remember to hold the device in front of you during a
push to talk call so you can see the display. The display
informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the
loudspeaker with your hands. Press and hold the voice
key the entire time you are talking. When you have
finished talking, release the key.
40
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 40 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 40 Jan 29, 2007 12:37:36 PM
To switch between channels during multiple calls,
select Swap. The active channel is highlighted.
To view the currently active participants in the channel,
select Options > Active members.
To invite a participant to a channel, select Options >
Send invitation.
Push to talk log
To open the push to talk log, select Options > PTT log.
The log shows the date, time, duration, and other
details of your push to talk calls.
Exit push to talk
Select Options > Exit. Select Yes to log out and close the
service. Press No if you want to keep the application
active on the background.
Net calls
With the net call service (network service), you can
make and receive calls over the internet.
Your device supports voice calls over the internet (net
calls). Your device attempts emergency calls primarily
over cellular networks. If an emergency call using
cellular networks is not successful, your device
attempts an emergency call through your net call
provider. Due to the established nature of cellular
telephony, you should use cellular networks for
emergency calls, if possible. If you have cellular network
coverage available, make sure that your cellular phone
is switched on and ready to make calls before you
attempt an emergency call. The capability for an
emergency call using internet telephony depends on
the availability of a WLAN network and your net call
provider's implementation of emergency call
capabilities. Contact your net call provider to check the
internet telephony emergency call capability.
VoIP (voice over internet protocol) technology is a set
of protocols that facilitate phone calls over an IP
network, such as the internet. VoIP phone calls can be
established between computers, between mobile
phones, and between a VoIP device and a traditional
telephone. To make or receive a VoIP call, your device
must be within WLAN coverage, for example.
The availability of the net call service may vary
according to your country or sales area.
Define the net call settings
Before you can make net calls, you need to define the
net call settings. After you have defined the net call
settings with these instructions, your device logs in to
the net call service automatically when you select
Menu > Connect. > Internet tel..
First: define a SIP profile
1. Select Menu > Tools > Settings > Connection >
SIP settings > Options > Add new, and enter the
required information. You must define all available
SIP settings, but ensure that Registration is set to
Always on. Contact your net call provider for the
correct information.
2. Select Proxy server, and set Transport type to Auto.
41
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 41 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 41 Jan 29, 2007 12:37:36 PM
3. Select Back until you return to the Connection menu.
Second: define a net call profile
1. Select Internet tel. settings > Options > New
profile. Enter a name for the profile, and select the
SIP profile you just created.
2. Select Back until you return to the main menu.
Third: select a preferred net call profile (optional)
If you select a preferred net call profile, Internet tel.
automatically uses this network profile to connect to
the net call service.
1. Select Menu > Connect. > Internet tel..
2. Select Preferred profile and the net call profile you
just created.
3. Select Back until you return to the main menu.
Tip: You can also use manual login to the net
call service. Use the same settings instructions
as with automatic login, but ensure that
Registration is set to When needed and
Transport type is set to UDP or TCP. With
manual login, you need to manually select the
network used in the net call service.
Connect to the net call service
To make or receive a net call, your device must be
connected to a net call service. Select Menu >
Connect. > Internet tel..
If you have selected automatic login, your device
automatically connects to the net call service. If you
manually login to the service, choose an available
connection network from the list, and select Select to
connect to the net call service. The saved networks,
which are marked with a star icon, are shown first on
the list. If you want to stop the connection from
establishing, select Cancel.
Select Options and from the following:
•Connect to service — to establish a connection to a
service when there is a net call service and suitable
connection network available.
•Disconnect from serv. — to end the connection to
the net call service.
•Change service — to choose the net call service for
outgoing calls if the device is connected to more
than one service. This option is shown only if there
is more than one configured service available.
•Configure service — to configure new services. This
option is shown only if there are services that have
not been configured.
•Save network — to save the network to which you
are currently connected. The previously saved
networks are marked with a star icon on the list of
connection networks. This option is shown only if
you are connected to an unsaved wireless LAN
network.
•Use hidden network — to connect to a net call
service using a hidden wireless LAN network.
•Refresh — to manually refresh the list of connection
networks. Use this option, if your wireless LAN
network is not shown on the list. The list is also
refreshed automatically every 15 seconds.
The available options may vary.
Your device can be connected only to one wireless LAN
access point at a time. If you use two or more net call
42
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 42 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 42 Jan 29, 2007 12:37:36 PM
services, which use the same access point, your device
may be connected to multiple services at the same time.
The service used for outgoing net calls is shown in the
view, where the connection networks are listed, and
can be changed by selecting Change service.
After you have successfully connected to a service, you
can save the used wireless LAN network as a known
access point.
Connect using a shortcut
You may have a shortcut for Internet tel. in the active
standby or you can add a shortcut if it is not available.
See "Standby mode settings," p. 88. By using the
shortcut, you can register manually if a net call service
and an access point are available. If you are already
connected to a net call service, the device asks if you
want to disconnect from the service.
Make net calls
If you set Internet call as the preferred call type and your
device is connected to a net call service, calls are made
as net calls as the default.
To set the preferred call type for outgoing calls, select
Menu > Connect. > Internet tel. > Options >
Settings > Preferred call type > Cellular or Internet
call.
You can make a net call from all applications where you
can make a regular voice call.
To make a net call in the standby mode, enter the phone
number or internet address, and press the call key.
To make a net call to an address that does not start with
a digit, press any number key when the device is in the
standby mode; then press the function key to clear the
display and to switch the device from number mode to
letter mode. Write the address, and press the call key.
You can also make a net call from Contacts and Log. To
make a call from Contacts, select Menu > Contacts, and
scroll to the desired contact. Select Options > Call >
Internet call.
To make a call from Log, select Menu > Log > Recent
calls and Missed calls, Recvd. calls or Dialed nos., and
scroll to the desired contact. Select Options > Call >
Internet call.
Service settings
Select Menu > Connect. > Internet tel. > Options >
Settings > Settings:.
Select Login type to view or change the way Internet
tel. connects to the net call service. Select from the
following:
•Automatic — Login automatically to the net call
service. When a known network is found, the device
automatically connects to the net call service. If you
use the automatic login type for wireless LAN
networks, the device periodically scans for wireless
LAN networks, which increases the demand on
battery power and reduces the battery life.
•Manual — Login manually to the net call service.
Select Saved conn. networks to view the connection
networks you have saved for the net call service or the
connection networks, which are recognized by the net
43
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 43 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 43 Jan 29, 2007 12:37:36 PM
call service. These networks are used for automatic
login and are marked with a star icon on the list of
connection networks. To remove a connection network
from the service, select Options > Remove.
Select Edit service settings to open the service-specific
settings. This option is only available if a service-specific
software plug-in has been installed in the device.
Voice commands
Select Menu > Tools > Voice cm..
Use voice commands to make phone calls and to launch
applications, profiles, or other functions on the device.
The device creates a voice tag for the entries in the
contacts list and for the functions designated in the
Voice cm. application. When a voice command is
spoken, the device compares the spoken words to the
voice tag in the device.
Make a call
The voice tag for a contact is the name or nickname that
is saved on the contact card in Contacts. To listen to the
voice tag, open a contact card, and select Options >
Play voice tag.
1. To make a call using a voice command, press and
hold the voice key.
2. When you hear the tone or see the visual display,
clearly speak the name saved on the contact card.
3. The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout,
the device dials the number. If the recognized
contact was not correct, select Next to view a list of
other matches or Quit to cancel dialing.
Launch an application
The device creates voice tags for the applications listed
in the Voice cm. application.
To launch an application using a voice command, press
and hold the voice key, and clearly speak the voice
command. If the recognized application was not
correct, select Next to view a list of other matches or
Quit to cancel.
To add more applications to the list, select Options >
New application.
To change the voice command of an application, scroll
to the application, and select Options > Change
command. Type the new voice command, and select
OK.
Change profiles
The device creates a voice tag for each profile. To set on
a profile using a voice command, press and hold the
voice key, and say the name of the profile.
To change the voice command, scroll to the desired
profile, and select Profiles > Options > Change
command.
44
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 44 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 44 Jan 29, 2007 12:37:36 PM
Voice command settings
To switch off the synthesizer that plays recognized
voice commands in the selected device language, select
Options > Settings > Synthesizer > Off.
To reset voice recognition learning when the main user
of the device has changed, select Reset voice adapts..
Voice mailbox
Select Menu > Tools > Voice mail.
When you open the voice mailbox application for the
first time, you are asked to enter the number of your
voice mailbox. To change the number, select Options >
Change number. To call the number, select Options >
Call voice mailbox.
Log
Select Menu > Log.
In the Log, you can view information about the
communication history of the device.
To receive correct log information, the device must be
switched on, the device must have a valid SIM card
installed, and you must be located in a service area of
the cellular network. The GPRS connection is put on hold
during voice calls unless the network supports dual
transfer mode or you have a USIM card and are within
the coverage of a UMTS network.
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes, and so
forth.
To view the logs for recent voice calls, their
approximate duration, and packed data connections,
select Recent calls, Call timers, or Packet data; and press
the scroll key.
To sort the events by type or direction, scroll right to
open the general log, and select Options > Filter. Scroll
to a filter type, and press the scroll key. Select the type
or direction, and press the scroll key.
To set the time how long all communication events are
held in the log, select Options > Settings > Log
duration, an option, and OK.
To clear missed and received calls and dialed numbers,
select Recent calls > Options > Clear recent calls.
45
Telephone
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 45 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 45 Jan 29, 2007 12:37:36 PM
Contacts
Press the contacts key.
Manage all of your contact information, such as phone
numbers and addresses. Add a personal ringing tone,
voice tag, or a thumbnail image to a contact. Send
contact information to compatible devices or receive
contact information as business cards from compatible
devices, and add them to your own list of contacts.
To add a contact, select Options > New contact. Enter
the contact information, and select Done.
To edit information in a contact card, scroll to the
contact, and select Options > Edit > Options. Select
from the following:
•Add thumbnail — Add a thumbnail image that will
display when a contact calls you. The image must be
previously saved to your device or memory card.
•Remove thumbnail — Remove the image from the
contact card.
•Add detail — Add fields of information to a contact
card, such as Job title.
•Delete detail — Delete any details that you added to
a contact card.
•Edit label — Edit the field names of the contact card.
Manage contact groups
Create a contact group so that you can send text or e-
mail messages to several recipients at the same time.
1. Scroll to the right, and select Options > New
group.
2. Enter a name for the group or use the default name,
and select OK.
3. Open the group, and select Options > Add
members.
4. Scroll to each contact you want to add to the group,
and press the scroll key to mark it.
5. Select OK to add all marked contacts to the group.
The following options are available when you select
Options in the contact groups view:
•PTT options — Make a push to talk call either to
an individual or to a group, or send a callback
request.
If push to talk is not available from your wireless
service provider, it may not appear in the menu
of your device.
•Open — Open the contact group and view the
group members.
•Create message — Send a message.
•New group — Create a new contact group.
•Delete — Delete a contact group.
•Rename — Rename the contact group.
•Ringing tone — Assign a ringing tone to a contact
group.
•Contacts info — View the information for a
contact group.
46
Contacts
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 46 Jan 29, 2007 12:37:36 PM
•Settings — Set the name display settings for
contact group members.
Manage default
information
Assign a default number or address to a contact so you
can easily call or send a message to the default number
or address, even if several numbers or addresses are
saved to that contact.
To change default information for a contact, open the
contact, and select Options > Defaults. Select the
number or address you want to set as a default, and
select Assign.
The default number or address is underlined in the
contact.
Copy contacts between SIM
and device memory
To copy contacts from a SIM card to device memory,
select Options > SIM contacts > SIM directory to open
the SIM directory. Mark the contacts you want to copy,
or select Mark all to copy all contacts. Select Options >
Copy to Contacts.
To copy contacts from the device memory to a SIM card,
select Options > Copy to SIM direct.. Mark the contacts
you want to copy, or select Mark all to copy all contacts.
Select Options > Copy to SIM direct..
Select Options > SIM contacts > SIM directory to see
the names and numbers stored on the SIM card. In SIM
directory you can add, edit, or copy numbers to
Contacts, and you can make calls.
Select ringing tones for
contacts
Select a ringing tone for a contact or contact group. If
the caller's phone number is sent with the call and your
device recognizes the number, the ringing tone plays
when the contact calls you.
To select a ringing tone for a contact or contact group,
open the contact or contact group, and select Options >
Ringing tone. A list of ringing tones opens. Select the
ringing tone you want to use.
To remove the ringing tone, select Default tone from
the list of ringing tones.
Business cards
Press the contacts key.
You can send, receive, view, and save contact cards as
business cards in vCard or Nokia Compact Business Card
format.
You can send business cards to compatible devices
using SMS, MMS, or e-mail, or an infrared or Bluetooth
connection.
To send a business card, select the contact card from
the contacts list, and select Options > Send. Select Via
47
Contacts
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 47 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 47 Jan 29, 2007 12:37:36 PM
text message, Via multimedia, Via e-mail, Via
Bluetooth, or Via infrared. Enter the phone number or
address, or add a recipient from the contacts list. Select
Options > Send. If you select SMS as the sending
method, contact cards are sent without images.
To view a received business card, select Show from the
displayed notification, or open the message from the
inbox folder in Messag..
To save a business card, select Options > Save business
card when the incoming message appears on the
device.
To save a received business card, select Options > Save
business card.
To delete a received business card, select Options >
Delete.
48
Contacts
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 48 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 48 Jan 29, 2007 12:37:36 PM
Nokia Team suite
Select Menu > Office > Team suite.
With Nokia Team Suite, you can create, edit, and delete
teams, and send messages, view teams' web pages and
communication history, and make phone calls to teams
at one go.
To create a new team, select Options > Team > Create
new. Give a name for the team and enter the conference
call service information, if needed. Then select the
members for the team.
To select an action, select the team to which you want
to apply the action, scroll right to the action bar, and
select the desired action. If you do not want to apply
the action to all team members, open the team, and
select the desired members by pressing the scroll key.
Then select the action.
To find more actions than shown on the action bar,
select Options > Actions. The following actions are
available:
•Call — Make a phone call to the team or selected
team members. The team members are called one
by one and put on hold until the calls can be merged
into a conference call (network service). The
maximum number of participants depends on the
network service.
•Create message — Send a text message, a
multimedia message, or an e-mail to the team or
selected team members.
•Call conference service — Start a call to the
conference call service (network service) defined for
the selected team.
•Communication log — View the communication log
for the team or selected team members.
•Team search — Search for content related to the
team or team members.
•Push to talk — Communicate via push to talk
(network service) with the team or selected team
members.
If Push to talk is not available from your wireless
service provider, it may not appear in the menu of
your device.
•Team Web bookmarks — Open the bookmark folder
that contains the team's web pages.
To select which actions are shown in the action bar and
in which order, select Options > Settings > Action bar
icons.
Edit teams
To add team members, select Options > Members >
Add.
To remove team members, select Options >
Members > Remove.
To edit the details of a member, select Options >
Members > Edit.
49
Nokia Team suite
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 49 Jan 29, 2007 12:37:36 PM
To select whether to see the team members' pictures
on the display, select Options > Settings > View
contact image.
To see to which teams a member belongs, select
Options > Members > Belongs to teams.
50
Nokia Team suite
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 50 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 50 Jan 29, 2007 12:37:36 PM
Calendar
Select Menu > Calendar.
In Calendar, you can create and view scheduled events
and appointments. You can also set alarms for calendar
entries.
You can synchronize your calendar data with a
compatible computer using Nokia PC Suite. For
information on synchronization, see the PC Suite guide.
Create calendar entries
You can create four types of calendar entries:
•Meeting entries have a specific date and time.
•Memo entries are related to the whole day but not
to a specific time of the day. Memo entries do not
appear in the weekly time schedule view.
•Anniversary entries remind you of birthdays and
special dates. They refer to a certain day but not a
specific time of the day. Anniversary entries are
repeated every year.
•To-do entries remind you of a task that has a due
date but not a specific time of the day.
To create a calendar entry, scroll to a date, and select
Options > New entry. Select an entry type. Available
settings for meeting, memo, anniversary, and to-do
entries vary.
To open and edit an existing entry, scroll to the entry,
and select Options > Open. Edit the details in the
various fields.
Tip: When you edit or delete a repeated entry,
choose how you want the change to take effect.
If you select All calendar entries deleted, all
repeated entries are deleted. If you select
Delete entry, only the current entry is deleted.
To-do
You can create and maintain a task or list of tasks that
must be done by a certain day. Each task can be
assigned a due date, and an alarm.
To open the list of to-do notes, select Options > To-do
view.
To add a to-do note, select Options > New entry > To-
do. Start to write the task in the Subject field. You can
set a due date for the task, create an alarm for it, and
specify a priority. The priority icons are ( ! ) High and ( - )
Low. There is no icon for Normal.
To mark a task as completed, scroll to the task in the to-
do list, and select Options > Mark as done.
To restore a task, scroll to it in the todo list, and select
Options > Mark as not done.
51
Calendar
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 51 Jan 29, 2007 12:37:36 PM
Calendar views
To switch between the different calendar views, select
Options in any calendar view. Select a type of view from
the list.
To set the default calendar view, select Options >
Settings > Default view > Month view , Week view,
Day view, or To-do view.
To view a specific date in the calendar view, select
Options > Go to date. Enter the date, and select OK.
Add a received calendar
entry to your calendar
You can receive a calendar entry as an attachment to a
multimedia or e-mail message.
To add a received calendar entry to your calendar, open
the calendar entry attachment in the message, and
select Options > Save to Calendar. The entry is added
to your default calendar.
52
Calendar
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 52 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 52 Jan 29, 2007 12:37:36 PM
Clock
Select Menu > Office > Clock.
To change the clock type, select Options > Settings >
Clock type > Analog or Digital.
Date and time settings
To change the date and time, their display formats,
alarm tone, and to define whether you want to use
automatic time update, select Options > Settings and
from the following:
•Time — Enter the time, and select OK.
•Time zone — Enter the time zone, and select OK.
•Date — Enter the date, and select OK.
•Date format — Change how the date is displayed.
Scroll to the desired format, and select OK.
•Date separator — Change the symbol that separates
days, months, and years. Scroll to the symbol you
want, and select OK.
•Time format — Select 24-hour or am/pm.
•Time separator — Select the symbol that separates
hours and minutes.
•Clock type — Select Analog or Digital.
•Clock alarm tone — Select the tone that you want to
use for the alarm clock.
•Network operator time — Update time, date, and
time zone information automatically (network
service). Select Auto-update to activate. This service
may not be available in all networks.
Alarm clock
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether
you want to activate the device for calls. Select No to
switch off the device or Yes to make and receive calls.
Do not select Yes when wireless phone use may cause
interference or danger.
To set an alarm, select Options > Set alarm. Enter the
alarm time, and select OK.
To view and change alarms, select Options > Reset
alarm.
To remove an alarm, select Options > Remove alarm.
53
Clock
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 53 Jan 29, 2007 12:37:36 PM
Connectivity
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, they will not appear on your device menu. Your
device may also have been specially configured. This
configuration may include changes in menu names,
menu order, and icons. Contact your service provider for
more information.
Your device offers several options (network services) to
connect to the Internet, a corporate intranet, or to
another device or PC. Wireless methods include wireless
LAN, Bluetooth, and infrared. Your device supports a
wired solution with a USB (Universal Serial Bus) cable
connection for Nokia PC Suite. Your device also allows
you to communicate using net calls (Voice over IP),
instant messaging (chat), and modem-based
connections. If it is available within your network, you
may also communicate using the push to talk feature.
Packet data (GPRS)
GPRS (general packet radio service) enables wireless
access for mobile phones to data networks (network
service). GPRS uses packet data technology where
information is sent in short bursts of data over the
mobile network. The benefit of sending data in packets
is that the network is occupied only when sending or
receiving data. As GPRS uses the network efficiently, it
allows for quick data connection set-up and fast data
transmission speeds.
You must subscribe to the GPRS service. For availability
and subscription to GPRS, contact your network
operator or service provider.
Enhanced GPRS (EGPRS) is similar to GPRS, but it enables
faster connection. For more information on the
availability of EGPRS and data transfer speed, contact
your network operator or service provider. Note that
when you have selected GPRS as a data bearer, the
device uses EGPRS instead of GPRS if this is available in
the network.
During a voice call, you cannot establish a GPRS
connection, and any existing GPRS connection is put on
hold unless the network supports dual transfer mode.
UMTS (3G)
Universal Mobile Telecommunications System (UMTS) is
a third-generation (3G) mobile communication system.
Besides voice and data, UMTS enables audio and video
delivery to wireless devices.
If your device is equipped to work within UMTS
networks, it can automatically switch between the GSM
and UMTS networks. See "Basic information about your
device," p. 10.
To select which network to use, select Menu > Tools >
Settings > Network and the network in Network
mode. If you want the device to switch between the
networks automatically, select Dual mode.
54
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 54 Jan 29, 2007 12:37:36 PM
The GSM network is indicated with , the UMTS
network with .
When you use your device in GSM and UMTS networks,
multiple data connections can be active at the same
time, and access points can share a data connection. In
the UMTS network, data connections remain active
during voice calls. You can, for example, browse the
Web faster than previously possible while
simultaneously speaking on the phone.
Cable connection
Install the USB data cable driver to your PC before you
use a cable connection. You can use the Data transfer
without installing the USB data cable drivers.
Select Menu > Connect. > Data cbl..
Using a USB data cable, you can connect your device to
a compatible PC . Connect the USB data cable to the
bottom of the device. To change the device type you
normally connect to your device with the data cable,
press the scroll key.
Select from the following:
•Ask on connection — Select whether you want to be
asked for the device type every time you connect the
data cable to your device.
•PC Suite — Connect the PC Suite to your device with
the data cable, and use your device as a modem.
•Data transfer — Access and transfer data such as
music or image files from your computer using the
data cable connection. To use the Data transfer
mode, make sure that you have not selected USB as
a connection type in the Manage connections
settings in Nokia PC Suite. Insert a memory card to
your device, connect the device to a compatible
computer with the USB data cable, and select Data
transfer when the device asks which mode is used.
In this mode, your device acts as a mass storage
device and you can see it as a removable hard drive
in your computer. The device will switch into the
Offline profile if this is selected. End the connection
from the PC (for example, from an Unplug or Eject
Hardware wizard in Windows) to avoid damaging
the memory card. After you end the connection, the
device returns to the profile in which it was before
using the data transfer mode.
Bluetooth
This device is compliant with Bluetooth Specification
1.2 supporting the following profiles: Generic Access
Profile, Serial Port Profile, Dial-up Networking Profile,
Headset Profile, Handsfree Profile, Generic Object
Exchange Profile, Object Push Profile, File Transfer
Profile, SIM Access Profile, and Basic Imaging Profile.. To
ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the
manufacturers of other devices to determine their
compatibility with this device.
Bluetooth technology enables wireless connections
between electronic devices within a range of 10 meters
(33 feet). A Bluetooth connection can be used to send
images, videos, texts, business cards, calendar notes, or
to connect wirelessly to devices using Bluetooth
technology, such as computers.
55
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 55 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 55 Jan 29, 2007 12:37:36 PM
Since devices using Bluetooth technology
communicate using radio waves, your device and the
other devices do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of
10 meters of each other, although the connection can
be subject to interference from obstructions such as
walls or from other electronic devices.
Start using Bluetooth connectivity
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
Select Menu > Connect. > Bluetooth.
To activate Bluetooth, press the function key and the
Ctrl key simultaneously. To deactivate, press the
function key and the Ctrl key again. If you use this
shortcut to activate Bluetooth, you will not be asked to
name your device.
1. When you activate Bluetooth for the first time, you
are asked to give a name to your device. Give your
device a unique name to make it easy to recognize
if there are several Bluetooth devices in the vicinity.
2. Select Bluetooth > On.
3. Select My phone's visibility > Shown to all.
Your device and the name you entered can now be seen
by other users with devices using Bluetooth
technology.
Settings
Define the following settings:
•Bluetooth — Select On to be able to connect to
another compatible device using Bluetooth
connectivity.
•My phone's visibility — Select Shown to all to allow
other devices using Bluetooth technology to find
your device when you have set Bluetooth > On. To
prevent other devices from finding your device,
select Hidden. Even if you select Hidden, paired
devices can still detect your device.
•My phone's name — Enter a name for your device.
The name is visible to other devices that search for
devices using Bluetooth technology. The maximum
length of the name is 30 characters.
•Remote SIM mode — Select On to enable another
device, such as a compatible car kit enhancement, to
use the SIM card in your device to connect to the
network. See "SIM access profile," p. 58.
If Bluetooth was turned off as a result of entering the
Offline profile, you must re-enable Bluetooth manually.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
Send data
Several Bluetooth connections can be active at a time.
For example, if you are connected to a headset, you can
56
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 56 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 56 Jan 29, 2007 12:37:36 PM
also transfer files to another compatible device at the
same time.
1. Open the application where the item you want to
send is stored.
2. Select the item, and select Options > Send > Via
Bluetooth. The device searches for other devices
using Bluetooth technology within range and lists
them.
Tip: If you have sent data using Bluetooth
before, a list of the previous search results
is displayed. To search for more Bluetooth
devices, select More devices.
3. Select the device with which you want to connect,
and press the scroll key to set up the connection. If
the other device requires pairing before data can be
transmitted, you are asked to enter a passcode.
4. When the connection has been established, Sending
data is shown.
The Sent folder in Messag. does not store messages sent
using Bluetooth connectivity.
Bluetooth connectivity indicators
Bluetooth is active.
When the icon is blinking, your device is trying to
connect to the other device. When the icon is shown
continuously, the Bluetooth connection is active.
Pair devices
Select Menu > Connect. > Bluetooth, and scroll right
to open the Paired devices page.
Before pairing, create your own passcode (1-16 digits),
and agree with the user of the other device to use the
same code. Devices that do not have a user interface
have a fixed passcode. You need the passcode only
when you connect the devices for the first time. After
pairing, it is possible to authorize the connection. See
"Authorize a device," p. 58. Pairing and authorizing
the connection makes connecting quicker and easier,
as you do not have to accept a connection between
paired devices every time you establish the connection.
The passcode for remote SIM access must have 16 digits.
1. Select Options > New paired device. The device
starts to search for Bluetooth devices within range.
Tip: If you have sent data using Bluetooth
before, a list of the previous search results
is displayed. To search for more Bluetooth
devices, select More devices.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes to make the connection between your
device and the other device automatic or No to
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to a paired device that is only
displayed in your device, scroll to the device with which
57
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 57 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 57 Jan 29, 2007 12:37:36 PM
you have paired, and select Options > Assign short
name.
To delete a pairing, select the device whose pairing you
want to delete and Options > Delete. To delete all
pairings, select Options > Delete all.
Tip: If you are currently connected to a device
and cancel the pairing with that device, pairing
is removed immediately, and the connection is
switched off.
Authorize a device
If you trust a paired device, you can allow it to connect
automatically to your device. You can select from the
following options:
•Set as authorized — Connections between your
device and the other device can be made without
your knowledge. No separate acceptance or
authorization is needed. Use this status for your own
devices, such as your compatible headset or PC, or
devices that belong to someone you trust.
•Set as unauthorized — Connection requests from the
other device must be accepted separately every
time.
Receive data
If you want to receive data using Bluetooth, select
Bluetooth > On and My phone's visibility > Shown to
all. When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if you
want to accept the message. If you accept, the message
is placed in the Inbox folder in Messag.
Tip: You can access the files in the device or on
the memory card using a compatible accessory
that supports the File Transfer Profile Client
service (for example, a laptop computer).
SIM access profile
When the wireless device is in the remote SIM mode,
you can only use a compatible connected enhancement,
such as a car kit, to make or receive calls. Your wireless
device will not make any calls, except to the emergency
numbers programmed into your device, while in this
mode. To make calls from your device, you must first
leave the remote SIM mode. If the device has been
locked, enter the lock code to unlock it first.
With the SIM access profile, you can access the SIM card
of your device from a compatible car kit device. This
way, you do not need a separate SIM card to access SIM
card data and connect to the GSM network.
To use the SIM access profile, you need the following:
•Compatible car kit device that supports Bluetooth
wireless technology
•Valid SIM card in your device
For more information about car kit devices and
compatibility with your device, see www.nokia.com
and your car kit user guide.
For additional information, refer to the reference leaflet
included with your Nokia device.
Manage the SIM access profile
1. Select Menu > Connect. > Bluetooth to activate
Bluetooth connectivity in your device.
58
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 58 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 58 Jan 29, 2007 12:37:36 PM
2. To enable remote SIM access, scroll to Remote SIM
mode, and press the scroll key.
3. Activate Bluetooth in the car kit device.
4. Use your car kit device to start a search for
compatible devices. For instructions, see the user
guide of your car kit device.
5. Select your device from the list of compatible
devices.
6. To pair the devices, enter the Bluetooth passcode
shown on the display of the car kit device to your
device.
7. Authorize the car kit device. Select Menu >
Connect. > Bluetooth, and scroll to the Paired
devices page. Scroll to the car kit device, and enter
the Bluetooth passcode. When the device asks to
make the connection automatic, select Yes.
Connections between your device and the car kit
device can be made without separate acceptance or
authorization. If you select No, connection requests
from this device must be accepted separately every
time.
Tip: If you have already accessed the SIM card
from the car kit with the active user profile, the
car kit searches automatically for a device with
the SIM card. If it finds your device, and
automatic authorization is activated, the car
device automatically connects to the GSM
network when you switch on the car ignition.
When you activate the remote SIM access profile, you
can use applications on your device that do not need
network or SIM services.
To end the remote SIM access connection from your
device, select Menu > Connect. > Bluetooth > Remote
SIM mode > Off.
Infrared
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device is
a Class 1 laser product.
Use infrared to connect two devices and transfer data
between them. With infrared, you can transfer data
such as business cards, calendar notes, and media files
with a compatible device.
Send and receive data
1. Ensure that the infrared ports of the devices face
each other. The positioning of the devices is more
important than angle or distance.
2. Select Menu > Connect. > Infrared, and press the
scroll key to turn on infrared on your device. Turn
on infrared on the other device.
Tip: You can also turn on infrared by
pressing the function key and the Chr key
simultaneously.
3. Wait a few seconds until an infrared connection is
established.
4. To send, locate the desired file in an application or
the file manager, and select Options > Send > Via
infrared.
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is
cancelled and must be started again.
59
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 59 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 59 Jan 29, 2007 12:37:36 PM
All items received through infrared are placed in the
Inbox folder in Messag..
Positioning devices away from each other breaks a
connection, but the infrared light beam remains active
on your device until it is deactivated.
Modem
Select Menu > Connect. > Modem.
Together with a compatible computer, you can use your
device as a modem to connect to the Web.
Before you can use your device as a modem
•You must subscribe to the appropriate network
services from your service provider or Internet
service provider.
•You need a compatible computer with infrared
connectivity.
•You must have Nokia PC Suite installed on your
computer.
•You must have the appropriate drivers installed on
your computer. You may need to install or update
infrared drivers. After you have installed Nokia PC
Suite, follow the instructions on the computer
display to install the drivers and connect your device
to the computer.
After you have installed Nokia PC Suite and the
appropriate drivers, start Nokia PC Suite on your
computer. Select Connect to the Internet, and follow the
instructions on the computer display.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared
ports of the device and computer are directly facing
each other with no obstacles between them.
You may not be able to use some of the other
communication features when the device is used as a
modem.
Email data roaming
Select Menu > Tools > Settings > Connection >
Access point groups.
Your device allows roaming between wireless access
technologies, such as WLAN and GPRS, for e-mail. For
example, you can start an e-mail session at home and
continue the session on your way to work. While your
session continues uninterrupted, your handheld device
switches from WLAN to GPRS and back to WLAN when
you arrive at your workplace.
Access point groups
To create an access point group, select Access point
groups > Options > New group. In the Group name
field, enter a name for the group. Define in the Conn.
switching field whether to show the connection
switching process on the display of your device. Choose
and edit the access points that belong to this group in
the Access points section.
To remove an access point in an access point group,
select the access point and Options > Remove.
60
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 60 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 60 Jan 29, 2007 12:37:36 PM
Internet access points
An access point is where your device connects to a
network. To use e-mail and multimedia services or to
connect to the Internet and browse web pages, you
must first define Internet access points for these
services. You may need to set up several Internet access
points, depending on the sites you want to access. For
example, browsing the Web may require one access
point, and accessing your company intranet may
require another. To connect to the Internet over GPRS,
your device may have predefined, default Internet
access point settings.
When you switch on your device for the first time, the
access points may be configured automatically based
on the service provider information in your SIM card.
You can also receive the access points settings in a
message from your service provider. This might reduce
the number of settings you need to enter yourself.
The available options may vary. Some or all access
points may be preset for your device by your service
provider. You may not be able to add, edit, or delete
access points.
Contact your service provider and e-mail service
provider for more information on access points and
their settings.
See "Connection settings," p. 90.
Set up an Internet access point for
packet data (GPRS)
When you switch the device on, it may recognize the
SIM card provider and configure the correct text
message, multimedia message, and GPRS settings and
access points automatically.
1. Select Menu > Tools > Settings > Connection >
Access points.
2. Select Options > New access point. To use an
existing access point as a basis for the new one,
select Use existing settings. To start with an empty
access point, select Use default settings.
3. Define the following settings.
•Connection name — Enter a descriptive name for
the connection.
•Data bearer — Select Packet data.
•Access point name — Enter the name for the
access point. The name is usually provided by
your service provider or network operator.
•User name — Enter your user name if required
by the service provider. User names are often
case-sensitive and provided by your service
provider.
•Prompt password — Select Yes to enter your
password each time you log into a server or No
to save the password in your device memory and
automate the login.
•Password — Enter your password if required by
the service provider. The password is often case-
sensitive provided by the service provider.
61
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 61 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 61 Jan 29, 2007 12:37:36 PM
•Authentication — Select Secure to always send
your password encrypted or Normal to send your
password encrypted when possible.
•Homepage — Enter the Web address of the page
you want to display as a home page when you
use this access point.
4. After defining the settings, select Options >
Advanced settings to define the advanced settings
or Back to save the settings and exit.
For information on the advanced settings, see the
extended user guide on the Web.
Set up an Internet access point for
wireless LAN
You can use the WLAN wizard to create Internet access
points for wireless LAN, or define the access point
manually. See "Wireless local area network
(WLAN)," p. 64.
Connection manager
Select Menu > Connect. > Conn. mgr..
To view the status of data connections or end
connections, select Act. data conn..
To search for wireless LANs available within range,
select Availab. WLAN.
View and end active connections
Note: The actual invoice for calls and services
from your service provider may vary, depending on
network features, rounding off for billing, taxes, and so
forth.
In the active connections view, you can see the open
data connections: data calls, packet data connections,
and wireless LAN connections.
To view detailed information about network
connections, select the connection from the list and
Options > Details. The type of information shown
depends on the connection type.
To end a network connection, select the connection
from the list and Options > Disconnect.
To end all active network connections simultaneously,
select Options > Disconnect all.
To view the details of a network, press the scroll key.
Search for wireless LAN
To search for wireless LANs available within range,
select Menu > Connect. > Conn. mgr. > Availab.
WLAN. A list of found networks is displayed.
The available wireless LAN view shows a list of wireless
LANs within range, their network mode (infrastructure
or ad-hoc), signal strength indicator and network
encryption indicators, and if your device has an active
connection with the network.
To view the details of a network, press the scroll key.
62
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 62 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 62 Jan 29, 2007 12:37:36 PM
To create an Internet access point in a network, select
Options > Define access point.
63
Connectivity
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 63 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 63 Jan 29, 2007 12:37:36 PM
Wireless local area network (WLAN)
Some places, like France, have restrictions on the use of
wireless LAN. Check with your local authorities for more
information.
This device can detect and connect to a wireless local
area network (WLAN). To use wireless LAN, a network
must be available in the location and your device must
be connected to it.
See wireless LAN
availability
Your device can show you whether wireless LAN is
available.
To have your device show wireless LAN availability,
select Menu > Tools > Settings > Connection >
Wireless LAN > Show availability.
If wireless LAN is available, is shown on the display.
Tip: You can also scan for networks in range.
Wireless LAN connections
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorized access to your data.
To use wireless LAN, you must create an internet access
point (IAP) in a wireless LAN. Use the access point for
applications that need to connect to the internet. A
wireless LAN connection is established when you create
a data connection using a wireless LAN Internet access
point. The active wireless LAN connection is ended
when you end the data connection. You can also end
the connection manually. See "Connection
manager," p. 62.
You can use wireless LAN during a voice call or when
packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same internet access point.
When the device is in the Offline profile, you can still use
wireless LAN (if available). Remember to comply with
any applicable safety requirements when establishing
and using a wireless LAN connection.
If you move the device to another location within the
wireless LAN and out of range of a wireless LAN access
point, the roaming functionality can automatically
connect your device to another access point that
belongs to the same network. As long as you remain
within range of access points that belong to the same
network, your device can stay connected to the
network.
Tip: To check the unique media access control
(MAC) address that identifies your device, for
example to configure the MAC address of your
device to a WLAN router, enter *#62209526#
64
Wireless local area network (WLAN)
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 64 Jan 29, 2007 12:37:36 PM
on the device keypad. The MAC address is
shown on the device display.
Operating modes
Your device enables different types of communication
in a wireless LAN. The two operating modes are
infrastructure and ad hoc.
•The infrastructure operating mode allows two kinds
of communication: wireless devices communicate
with each other through a wireless LAN access point
or wireless devices communicate with a wired LAN
device through a wireless LAN access point. The
advantage of the infrastructure operating mode is
that you can have more control over network
connections because they pass through an access
point. A wireless device can access the services that
are available in a regular wired LAN: company
database, e-mail, the Internet, and other network
resources, for example.
•In the ad hoc operating mode you can send data to
and receive it from other devices with compatible
wireless LAN support , for example, to be printed.
These functions may require an additional third
party application to work. No wireless LAN access
point is required. Simply make the necessary
configurations and start communicating. Ad hoc
networking is easy to set up, but communication is
limited to devices that are within range and support
compatible wireless LAN technology.
WLAN wizard
The WLAN wizard helps you to connect to a wireless
LAN.
The WLAN wizard shows the status of your wireless LAN
connections and network searches in the active
standby mode. To view the available options, scroll to
the row showing the status, and press the scroll key.
Depending on the status, you can start the web browser
using a wireless LAN connection, disconnect from a
wireless LAN, search for wireless LANs, or set network
scanning on or off.
If wireless LAN scanning is off and you are not
connected to any wireless LAN, WLAN scanning off is
displayed in the active standby mode. To set scanning
on and search for available wireless LANs, scroll to the
status, and press the scroll key.
To start a search for available wireless LANs, scroll to a
status, press the scroll key, and select Search for
WLAN. To set wireless LAN scanning off, scroll to a
status, press the scroll key, and select Switch WLAN scan
off.
When Start Web browsing is selected, the WLAN wizard
automatically creates an internet access point (IAP) for
the selected wireless LAN. The IAP can also be used with
other applications requiring wireless LAN connection.
If you select a secured wireless LAN network, you are
asked to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct hidden
service set identifier (SSID).
You can also start the WLAN wizard separately to get
more information on wireless LANs within range. Select
65
Wireless local area network (WLAN)
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 65 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 65 Jan 29, 2007 12:37:36 PM
Menu > Connect. > WLAN wiz.. Found networks are
displayed.
Scroll to the desired network, select Options and from
the following:
•Start Web browsing or Cont. Web browsing — Start
or continue browsing the web using the IAP of the
wireless LAN.
•Disconnect WLAN — Disconnect the active
connection to the wireless LAN.
•Refresh — Update the list of available wireless LANs.
•Details — View the details of the wireless LAN.
•Define access point — Create an internet access
point without starting the web browser.
Always enable one of the available encryption methods
to increase the security of your wireless LAN connection.
Using encryption reduces the risk of unauthorized
access to your data.
Wireless LAN access points
To search for wireless LANs available within range,
select Menu > Connect. > WLAN wiz.. To create an
internet access point in a wireless LAN, select Options >
Define access point. To view the details of a network
shown in the list, select Options > Details.
When an application asks you to select an access point,
select the created access point. You can also create an
internet access point by selecting Search for WLAN, or
use Conn. mgr. to create internet access points. See
"Connection manager," p. 62.
Set up a wireless LAN access
point manually
If you cannot use the WLAN wizard, you can define
wireless LAN access points manually.
1. Select Menu > Tools > Settings > Connection >
Access points.
2. Select Options > New access point. To use an
existing access point as a basis for the new one,
select Use existing settings. To start with an empty
access point, select Use default settings.
3. Define the following settings.
•Connection name — Enter a descriptive name for
the connection.
•Data bearer — Select Wireless LAN.
•WLAN netw. name — To enter the service set
identifier (SSID), that is, the name that identifies
the specific wireless LAN, select Enter manually.
To select the network from the wireless LANs in
range, select Search for netw..
•Network status — Select Hidden if the network
you are connecting to is hidden, or Public if it is
not hidden.
•WLAN netw. mode — If you select
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a wireless LAN access point. If you select Ad-hoc,
devices can send and receive data directly with
each other, and no wireless LAN access point is
needed.
•WLAN security mode — You must select the same
security mode that is used in the wireless LAN
66
Wireless local area network (WLAN)
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 66 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 66 Jan 29, 2007 12:37:36 PM
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings. See the extended user guide
on the Web or the device help for more
information.
•WLAN security sett. — Edit the security settings
for the selected WLAN security mode.
•Homepage — Enter the Web address of the page
you want to display as a home page when you
use this access point.
The settings available for editing may vary.
Wireless LAN settings
See "Wireless LAN," p. 92.
67
Wireless local area network (WLAN)
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 67 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 67 Jan 29, 2007 12:37:36 PM
Web
Select Menu > Web (network service).
Web is one of the two browsers in your device. With
Web, you can browse regular Web sites. These pages
use the extensible hypertext markup language (XHTML)
or hypertext markup language (HTML). If you want to
browse WAP pages, use Menu > Media > Services. Both
of the browsers use their own bookmarks. The links in
your received messages open in the Services browser.
Check the availability of services, pricing, and fees with
your network operator or service provider. Service
providers will also give you instructions on how to use
their services.
Access points
To browse the Web, you need to configure Internet
access point settings. If you are using a data call or a
GPRS connection, your wireless network must support
data calls or GPRS, and the data service must be
activated for your SIM card. Your device might have
configured the Internet access point settings
automatically based on your SIM card. If not, contact
your service provider for the correct settings.
Tip: You may receive the Internet access point
settings from your service provider as a special
text message or from the network operator's
or service provider's Web pages.
You can also enter the Internet access point settings
manually. See "Internet access points," p. 61.
Browse the Web
To browse the Web, select a bookmark, and press the
scroll key. You can also enter the Web address, and press
the scroll key. Use only services that you trust and that
offer adequate security and protection against harmful
software.
Tip: When you start to enter the address,
addresses of pages you have previously visited
that match your input are displayed. To open a
page, scroll to the address, and press the scroll
key.
To open a Web link, scroll to it and press the scroll key.
On a Web page, new links appear underlined in blue and
previously visited links in purple. Images that act as
links have a blue border around them.
Addresses of the pages you visit are saved in the Auto.
bookmarks folder.
Keyboard shortcuts:
•Press 1 to open your Bookmarks.
•press 2 to find text.
•Press 3 to return to the previous page.
•Press 5 to switch between your open browser
windows.
68
Web
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 68 Jan 29, 2007 12:37:36 PM
•Press 8 to open page overview.
•Press 9 to go to a different Web page.
Bookmarks
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
To view a bookmarked Web page, scroll to the
bookmark, and press the scroll key.
To browse other Web pages, select Options >
Navigation options > Go to web address, enter the
page address, and select Go to.
To delete a bookmark, scroll to it, and press the
backspace key.
To add a bookmark, select Menu > Web > Options >
Bookmark manager > Add bookmark. Scroll to Name
to enter a descriptive name for the bookmark,
Address to enter the Web page address, Access point to
change the access point to connect to the Web page,
and User name or Password to enter your user name
and password, if required by the service provider. To
save the bookmark, select Back.
Download items
You can download different items such as ringing tones,
images, operator logos, themes, and video clips. To
download an item, scroll to it, and press the scroll key.
These items can be provided free, or you can purchase
them. Downloaded items are handled by the respective
applications in your device.
When you start a download, a list of ongoing, paused,
and completed downloads from the current browsing
session is displayed. To view the list, you can also select
Options > Tools > Downloads. In the list, scroll to an
item, and select Options to pause, resume, or cancel
ongoing downloads; or open, save, or delete completed
downloads.
To purchase items:
1. To download the item, scroll to the link, and press
the scroll key.
2. Select the appropriate option to purchase the item.
3. Carefully read all the information provided. To
continue the download, select Accept. To cancel the
download, select Cancel.
End a connection
To end the connection and view the browser page
offline, select Options > Advanced options >
Disconnect; or to end the connection and close the
browser, select Options > Exit.
69
Web
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 69 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 69 Jan 29, 2007 12:37:36 PM
Clear the cache
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty
the cache after each use. The information or services
you have accessed are stored in the cache.
To clear the cache, select Options > Advanced
options > Clear cache.
News feeds and blogs
Select Menu > Web > Web feeds.
Feeds are xml files in various Web pages that usually
contain headlines and articles, often about recent news
or other topics. You can subscribe to interesting feeds
on Web pages. Select Options > Subscribe.
Tip: Blog is a shortening of Weblog, which is a
continuously updated Web diary . Often the
author's personality is an important factor in
the blog.
To download a feed or blog, scroll to it, and press the
scroll key.
To add a feed or blog, select Options > Manage feed >
New feed, and enter the information.
To edit a feed or blog, scroll to a feed, select Options >
Manage feed > Edit, and modify the information.
Web settings
Select Menu > Web > Options > Settings.
Define the following settings:
•Access point — Scroll to the access point to connect
to Web pages, and press the scroll key.
•Load imgs. & sounds — Select No to load pages faster
when browsing by not loading the images on them.
•Default encoding — Select the correct character
encoding for your language.
•Auto. bookmarks — Select On to save Web page
addresses that you visit automatically in the Auto.
bookmarks folder. To hide the folder, select Hide
folder.
•Screen size — Select Full screen to use the whole
display area for viewing Web pages. You can press
the left selection key to open Options and use the
available options while browsing in full screen
mode.
•Homepage — Select the page that you want to
appear as your homepage. Select Default to use the
access point homepage, User defined to enter the
homepage address, or Use current page to use the
currently open Web page.
•Mini map — Select whether you want to see an
overview of the page as a miniature on top of the
page you are viewing.
•History list — Select whether you want to see
miniatures of the pages you have visited when you
want to go back in your browsing history.
•Cookies — Select to allow or reject the sending and
receiving of cookies. Cookies are info the network
server collects about your visits to various Web
pages. They are necessary if you shop on the Web
70
Web
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 70 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 70 Jan 29, 2007 12:37:36 PM
(for example, to retain the items you buy until you
reach the cashier page). However, the information
may be misused (for example, you may receive
unwanted advertisements in your device).
•Java/ECMA script — Some Web pages may include
program commands that affect the appearance of
the page or interaction between the page and its
browsers. To deny the use of such scripts, select
Disabled (for example, if you have trouble
downloading).
•Security warnings — Select Show or Hide to see or
hide the security warnings you may receive during
browsing.
•Block pop-ups — Select whether you want to allow
pop-ups. Some pop-ups may be necessary (for
example, smaller windows where you write e-mails
in Web-based mail systems), but they may also
contain unwanted advertising.
Services
Select Menu > Media > Services (network service).
Services is one of the two browsers in your device. With
Services, you can browse WAP pages that have been
designed specially for mobile devices. For example,
operators may have WAP pages for mobile devices. To
browse regular Web pages, use the other browser in
Menu > Web.
Check the availability of services, pricing, and fees with
your network operator or service provider. Service
providers will also give you instructions on how to use
their services.
Tip: To start a connection, press and hold 0 in
the standby mode.
71
Web
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 71 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 71 Jan 29, 2007 12:37:36 PM
Office applications
Office folder contains tools that help you organize and
manage the details of different events in your personal
and business life.
Some applications in the Office folder are not available
in all languages.
Opening a large file may not be possible or it may take
a while.
File manager
With File mgr., you can manage the contents and
properties of files and folders. You can open, create,
move, copy, rename, and search for files and folders.
Copyright protection may prevent sending some files.
Quickoffice
To use the Quickoffice applications, select Menu >
Office > Quickoffice. A list of files in the .doc, .xsl, .ppt,
and .txt file formats saved in your device memory or the
memory card opens.
To open a file in its respective application, press the
scroll key.
To edit a file, open the file, and press the scroll key.
To sort files, select Options > Sort by.
To open Quickword, Quicksheet, or Quickpoint, scroll to
the desired tab with the scroll key.
Not all file formats or features are supported.
For more information, see the device help.
Quickword
With Quickword, you can view and edit Microsoft Word
documents on the display of your device. Quickword
supports colors, bold, and underline.
Quickword supports the viewing and editing of
documents saved in .doc format in Microsoft Word 97,
2000, and XP. Not all variations or features of the
mentioned file formats are supported.
To move in the document, use the scroll key.
To search the document for text, select Options >
Search options.
You can also select Options and from the following:
•Go to — Move to the start, end, or selected position
within the document.
•Zoom — Zoom in or out.
•Start auto-scroll — Start automatic scrolling through
the document. To stop scrolling, select Options >
Stop auto-scroll.
To edit the document, press the scroll key. Select Edit,
and from the available options. You can, for example,
72
Office applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 72 Jan 29, 2007 12:37:36 PM
align text, change the font and font color, and add
bullets and indentations.
Quicksheet
With Quicksheet, you can read and edit Microsoft Excel
files on the display of your device.
Quicksheet supports the viewing and editing of
spreadsheet files saved in .xls format in Microsoft Excel
97, 2000, and XP. Not all variations or features of the
mentioned file formats are supported.
To move around in the spreadsheet, use the scroll key.
To switch between worksheets, select Options >
Worksheet.
To search the spreadsheet for a text, value, or formula,
select Options > Search.
To change how the spreadsheet is displayed, select
Options and from the following:
•Pan — Navigate within the current worksheet by
blocks. A block contains columns and rows displayed
by a screen. To display the columns and rows, scroll
to a block and select OK.
•Resize — Adjust the size of columns or rows.
•Zoom — Zoom in or out
•Freeze panes — Keep the selected row, column, or
both visible while you move in the spreadsheet.
To edit the spreadsheet, press the scroll key. Select
Edit, and from the available options. You can, for
example, format text and cells, insert mathematical
operators and spreadsheet functions, and change the
background color.
Quickpoint
With Quickpoint, you can view and edit Microsoft
PowerPoint presentations on the display of your device.
Quickpoint supports the viewing and editing of
presentations created in .ppt format in Microsoft
PowerPoint 2000 and XP. Not all variations or features
of the mentioned file formats are supported.
To move between the slide, outline, and the notes view,
scroll to the desired tab with the scroll key.
To move to the next or previous slide in the
presentation, scroll up or down with the scroll key.
To view the presentation in full screen, select Options >
Full screen.
To expand items in the presentation in the outline view,
select Options > Expand.
To edit the presentation, press the scroll key. Select
Edit, and from the available options. You can, for
example, align text, change the font and font color, and
add bullets and indentations.
Print
You can print a message or file from the device, preview
a print job, define page layout options, select a printer,
or print to a file. You may not be able to print all
messages, such as multimedia messages or other
special messages.
To configure a printer for your device, select Menu >
Office > Printers > Options > Add. To set the printer
as the default printer, select Options > Set as default.
73
Office applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 73 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 73 Jan 29, 2007 12:37:36 PM
Before you print, make sure that your device is properly
connected to the printer.
To print a message or a file, select Options > Print.
To print to a file, select Options > Printing options >
Print to file, and determine the location for the file.
To change the printing options, select Options >
Printing options. You can select the printer you want to
use, the number of copies and the range of pages you
want to print.
To change the page layout before printing, select
Options > Printing options > Page setup. You can
change the paper size and orientation, define the
margins, and insert a header or a footer. The maximum
length of the header and footer is 128 characters.
To preview a file or message before you print, select
Options > Printing options > Preview.
Notes
Select Menu > Office > Notes.
You can create and send notes to other compatible
devices, and save plain text files (.txt format) that you
receive to Notes.
To write a new note, select Options > New note, write
the text and press Done.
Calculator
Note: This calculator has limited accuracy and is
designed for simple calculations.
Select Menu > Office > Calculator.
To make a calculation, enter the first number of the
calculation. Scroll to and select a function such as add
or subtract from the function map. Enter the second
number of the calculation, and select =. Use the
keyboard to enter decimal points.
The calculator performs operations in the order they are
entered. The result of the calculation remains in the
editor field and can be used as the first number of a new
calculation.
To save the results of a calculation, select Options >
Memory > Save. The saved result replaces the
previously stored number in memory.
To retrieve the results of a calculation from memory and
use them in a calculation, select Options > Memory >
Recall.
To view the last saved result, select Options > Last
result.
Exiting the calculator application or turning off the
device does not clear the memory. You can recall the
last saved result the next time you open the calculator
application.
Converter
Select Menu > Office > Converter.
74
Office applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 74 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 74 Jan 29, 2007 12:37:36 PM
The converter has limited accuracy, and rounding errors
may occur.
Convert measurements
1. Scroll to the Type field, and select Options >
Conversion type to open a list of measures. Scroll to
the measure you want to use, and select OK.
2. Scroll to the first Unit field, and select Options >
Change currency. Select the unit from which you
want to convert, and select OK. Scroll to the next
Unit field, and select the unit to which you want to
convert.
3. Scroll to the first Amount field, and enter the value
you want to convert. The other Amount field
changes automatically to show the converted value.
Set base currency and exchange
rate
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Before you can make currency conversions, you must
choose a base currency and add exchange rates. The
rate of the base currency is always 1. The base currency
determines the conversion rates of the other
currencies.
1. To set the rate of exchange for the unit of currency,
scroll to the Type field, and select Options >
Currency rates.
2. A list of currencies opens, and you can see the
current base currency at the top. Scroll to the
currency type and enter the exchange rate you
would like to set per single unit of currency.
3. To change the base currency, scroll to the currency,
and select Options > Set as base curr..
4. Select Done > Yes to save the changes.
After you have inserted all the necessary exchange
rates, you can make currency conversions.
Screen export
You can show the screen of the device to an audience
with a compatible data projector, or other compatible
projection system. The screen content is transferred to
the data projector using, for example, a Bluetooth
connection.
Select Menu > Office > Screen export.
To be able to show screen content with a compatible
data projector, you must install the drivers of the data
projector. For more information, check with the data
projector manufacturer or its representative.
Not all applications support this feature. You can start
the external viewer in two ways: from the Office folder
or inside an application that supports it.
Show screen content
To show screen content with a data projector, open the
screen export application, and select Options > Select
device. In the list of available devices, scroll to the device
75
Office applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 75 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 75 Jan 29, 2007 12:37:36 PM
you want to use, and select OK. Select Options >
Enable to show screen content.
To hide the screen content, select Options > Hide. The
screen exporter application is moved to the
background.
To stop showing screen content, select Options >
Disable.
76
Office applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 76 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 76 Jan 29, 2007 12:37:36 PM
Data and software management
Application manager
Important: Only install and use applications and
other software from trusted sources, such as
applications that are Symbian Signed or have passed
the Java Verified™ testing.
Select Menu > Installat. > App. mgr..
When you open the application manager, you see all
the software packages that have been installed, with
their name, version number, type, and size. You can
view the details of installed applications, remove them
from your device, and specify installation settings.
Remote configuration
network service
Select Menu > Connect. > Dev. mgr..
You can connect to a server and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your network
operator, service providers, and company information
management department. Configuration settings may
include connection and other settings used by different
applications in your device. Available options may vary.
The remote configuration connection is usually started
by the server when the device settings need to be
updated.
Remote configuration settings
In the Dev. mgr. main view, select Options and select
from the following:
•Start configuration — Connect to the server and
receive configuration settings for your device.
•New server profile — Create a new server profile.
•Edit profile — Change the profile settings.
•Delete — Remove the selected profile.
•Enable config. — Select to receive configuration
settings from those servers for which you have a
server profile and have allowed configuration.
•Disable config. — Select to stop receiving
configuration settings from all servers for which you
have a server profile.
•View log — View the configuration log of the
selected profile.
Data synchronization
Menu > Connect. > Sync.
Use Sync to synchronize (network service) your
contacts, calendar, or notes with corresponding
applications on a compatible computer or remote
Internet server. Your synchronization settings are saved
in a synchronization profile. The application uses
SyncML technology for remote synchronization. For
information on SyncML compatibility, contact the
77
Data and software management
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 77 Jan 29, 2007 12:37:36 PM
supplier of the applications with which you want to
synchronize your device.
The available applications you can synchronize may
vary. Contact your service provider for more
information.
Tip: You may receive the synchronization
settings as a message from your service
provider.
Create a synchronization profile
To create a profile, select Options > New sync profile
and select from the following options:
•Sync profile name — Enter a name for the profile.
•Applications — Select the applications to
synchronize with the profile.
•Connection settings — Specify the needed
connection settings. Contact your service provider
for information.
Download!
Select Menu > Download!.
Download! (network service) is a mobile content shop
available on your device. You can browse, download,
and install items, such as latest applications and related
documents, to your device from the web.
The items are categorized under catalogs and folders
provided by Nokia or independent service providers.
Some items may be chargeable, but you can usually
preview them free of charge.
Only install and use applications and other software
from sources that offer adequate security and
protection against harmful software.
If Download! is not available from your wireless service
provider, it may not appear in the menu of your device.
For more information on the availability of Download!,
contact your network operator, service provider, or
dealer.
Settings Wizard
Select Menu > Tools > Sett. wizard.
Settings Wizard configures your device for operator
(MMS, GPRS, and Internet) and e-mail settings based on
your network operator information.
To use these services, you may have to contact your
network operator or service provider to activate a data
connection or other services.
If Settings Wizard is not available from your wireless
service provider, it may not appear in the menu of your
device. For more information on the availability of
Settings Wizard, contact your network operator, service
provider, or dealer.
The availability of different settings items in Settings
Wizard depends on the features of the device, SIM card,
wireless service provider, and the availability of the
data in the Settings Wizard database.
When you use the wizard for the first time you are
guided through settings configuration. To start the
wizard, select Start.
78
Data and software management
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 78 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 78 Jan 29, 2007 12:37:36 PM
If there is no SIM card inserted, you will be asked to
select the home country of your wireless service
provider, and your service provider. If the country or
service provider suggested by the wizard is not the
correct one, select the correct one from the list.
To access the main view of the Settings Wizard after the
wizard has finished the settings configuration, select
OK.
If the settings configuration is interrupted, the settings
will not be defined. After closing the wizard, you can
start to use the configured applications.
If you are not able to use Sett. wizard, visit the Nokia
phone settings Web site at www.nokia.com.
For additional information, refer to the reference leaflet
included with your Nokia device.
79
Data and software management
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 79 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 79 Jan 29, 2007 12:37:36 PM
Camera
You can take photos or record video clips with the built-
in camera. The camera lens is on the back of the device,
and the display works as a viewfinder. The camera
produces pictures in .jpeg format and video clips in .
3gpp format.
Take a picture
1. Select Menu > Media > Camera.
Your device supports an image capture resolution
of up to 1600 x 1200 pixels.
2. Use the display as a viewfinder, aim at your subject,
and press the scroll key. The device saves the photo
in the default folder, or in the folder you have
defined.
Tip: To zoom in or out before taking a
picture, scroll up or down.
3. If you do not want to keep the saved photo, select
Options > Delete. Select Back to return to the
viewfinder to take another picture. Select Options >
Go to Gallery to view the photo in Gallery.
If the light is dim, select Options > Night mode after
you have opened Camera but before taking a picture.
To adjust the image, select Options > Adjust > White
balance or Color tone.
To take pictures in a sequence, select Options >
Sequence mode. The camera takes six pictures in a row.
To take timed pictures, select Options > Self-timer,
select the desired timeout, and press Activate. The
camera takes a picture after the timeout has passed.
Tip: You can view photos in Menu > Media >
Gallery > Images.
Record a video clip
Select Camera, and scroll right to activate the video
recorder. To start recording a video clip, press the scroll
key. The remaining recording time is shown on the top
of the display. To pause the recording, select Pause; to
resume the recording, select Continue. To stop the
recording, select Stop. The device saves the clip in the
default folder, or in the folder you have defined. If you
do not want to keep the saved video clip, select
Options > Delete. Select Back to return to the
viewfinder to record another video clip. Select
Options > Play to view the video clip in the
RealPlayer application.
80
Camera
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 80 Jan 29, 2007 12:37:36 PM
Insert pictures into
messages
When you are creating a new multimedia message, you
can open the camera to insert a new picture into the
message.
To insert a picture into a multimedia message, select
Options > Insert new > Image. The viewfinder shows
you the image to be captured. To take a picture, press
the scroll key. To insert the picture in the message, press
the scroll key.
Insert videos into messages
When you are creating a new multimedia message, you
can open the camera to insert a new video into the
message.
To insert a video into a multimedia message, select
Options > Insert new > Video clip. Press the scroll key
to start recording. To insert the video in the message,
select Options > Select.
Settings
To edit the image settings, select Menu > Media >
Camera > Options > Settings > Image, and define the
following:
•Image quality — Define how much the picture is
compressed when being saved. High provides the
best image quality, but takes more memory.
Normal is the default quality setting. Basic takes the
least amount of memory.
•Show captured img. — Select whether you want the
captured image to be displayed after the capture.
•Image resolution — Select the resolution of the
images you capture.
•Default image name — Select Date or Text for the
default title assigned to a picture. Date assigns the
date of the capture as the title. Text assigns the term
you define and a number to the picture.
•Memory in use — Select the memory to use for
storing images: Phone memory or Memory card.
To edit the video settings, select Options > Settings >
Video, and define the following:
•Length — Select the length of the video clips that
you record. The maximum length of a video clip
depends on the available memory.
•Video resolution — Select the resolution to use
during video recording. The default setting for the
resolution is always the lowest setting.
•Default video name — Select Date or Text for the
default title assigned to a recorded video. Date
assigns the date of the recording as the title. Text
assigns the term you define and a number to the
recorded video.
•Memory in use — Select the memory to use for
storing recorded videos: Phone memory or Memory
card.
81
Camera
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 81 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 81 Jan 29, 2007 12:37:36 PM
Media applications
Select Menu > Media.
Media contains different media applications that allow
you to save and view images, record sounds, and play
sound clips.
Gallery
Select Menu > Media > Gallery.
Use Gallery to access and use different types of media,
including images, videos, music, and sounds. All viewed
images and videos and all received music and sounds
are automatically saved to Gallery. You can browse,
open, and create folders; and mark, copy, and move
items to folders. Sound clips are opened in the Music
Player, and video clips and streaming links in the
RealPlayer application.
To open a file or a folder, press the scroll key. Images
are opened in the image viewer.
To download files into the Gallery in one of the main
folders using the browser, select Graphic downl., Video
downl., Track downl., or Sound downl.. The browser
opens, and you can choose a bookmark or enter the
address for the site to download from.
To search for a file, select Options > Find. Start to enter
a search string (for example, the name or date of the
file you are searching for). Files that match the search
are shown.
Images
Select Menu > Media > Gallery > Images.
Images consists of two views:
•In the image browser view you can send, organize,
delete, and rename images stored in your device or
memory card.
•In the image viewer, which opens when you select
an image in the image browser view, you can view,
and send individual images. You can set images as
wallpaper for your display.
The following file formats are supported: JPEG, BMP,
PNG, and GIF 87a/89a. The device does not necessarily
support all variations of the file formats.
To open an image for viewing, select an image in the
image browser view, and select Options > Open. The
image opens in the image viewer.
To open the next or previous image for viewing, scroll
right or left in the image viewer.
To enlarge the viewed image on the display, select
Options > Zoom in, or press 5 or 7. To reduce the
viewed image on the display, select Zoom out or press
0.
To view the image in full screen size, select Options >
Full screen or press 7 twice. To return to normal view,
select Options > Normal screen.
82
Media applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 82 Jan 29, 2007 12:37:36 PM
To rotate an image, select an image, and Options >
Rotate. Select Right to rotate the image clockwise by 90
degrees, or select Left to rotate the image
counterclockwise by 90 degrees.
Manage image files
To view detailed information about an image, select an
image and Options > View details. Size and format of
the file, the time and date the file was last modified and
the resolution of the image in pixels are displayed.
To send an image, select the image, Options > Send,
and the method for sending.
To rename an image, select an image and Options >
Rename. Enter a new name, and select OK.
To set an image as wallpaper, select the image and
Options > Set as wallpaper.
To add an image to a contact card, select an image and
Options > Add to contact. The contacts view opens, and
you can select the contact for the image.
RealPlayer
Select Menu > Media > RealPlayer.
RealPlayer can play video clips and audio files that are
stored in the device memory or on a memory card,
transferred to your device from e-mail or compatible
PC, or streamed to your device over the Web.
Formats supported by RealPlayer include MPEG-4, MP4
(not streaming), 3GP, RV, RA, AAC, AMR, and Midi.
RealPlayer does not necessarily support all variations of
a media file format.
Tip: Streaming audio and video files means
playing them directly from the Web without
downloading them first to your device.
Play video clips and stream links
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To select audio and video files to play with RealPlayer,
select Options > Open, and scroll to a media clip in your
device or on a memory card.
To play streaming media, select a Web link that points
to a media clip, and select Play; or connect to the Web,
browse to a video clip or audio file, and select Play.
RealPlayer recognizes two kinds of links: an rtsp:// URL
and an http:// URL that points to a RAM file. Before the
content begins streaming, your device must connect to
a Web site and buffer the content. If a network
connection problem causes a playback error,
RealPlayer attempts automatically to reconnect to the
Internet access point.
To save a media clip, select Options > Save, scroll to a
folder in device memory or on a memory card, and
select Save. To save a link to a media file on the Web,
select Save link.
To fast-forward or rewind the clip during playback,
scroll up or down.
To increase or decrease the volume during playback,
press the volume keys.
83
Media applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 83 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 83 Jan 29, 2007 12:37:36 PM
Settings
Select Menu > Media > RealPlayer > Options >
Settings.
Video settings
Select Loop > On, if you want to replay video clips
automatically after they finish playing.
Connection settings
Select Connection, scroll to the following settings, and
press the scroll key to edit:
•Proxy — Select whether to use a proxy server and to
key in the proxy server's IP address and port number.
•Network — Change the access point to connect to
the Internet and to set the port range used when
connecting.
Proxy settings
Proxy servers are intermediate servers between media
servers and their users. Some service providers use
them for additional security or to speed up access to
Web pages that contain media files.
Contact your service provider for the correct settings.
Select Connection > Proxy, scroll to the following
settings, and press the scroll key to edit:
•Use proxy — Select Yes to use a proxy server.
•Proxy serv. address — Enter the IP address of the
proxy server. This setting is only available if you
select to use a proxy server.
•Proxy port number — Enter the port number of the
proxy server. This setting is only available if you
select to use a proxy server.
Network settings
Contact your service provider for the correct settings.
Select Connection > Network, scroll to the following
settings, and press the scroll key to edit:
•Default access point — Scroll to the access point to
connect to the Internet, and press the scroll key.
•Online time — Set the time when RealPlayer
disconnects from the network when you pause a
media clip that plays using a network link. Select
User defined, and press the scroll key. Enter the time,
and select OK.
•Lowest UDP port — Enter the lowest port number of
the server port range. The minimum value is 1024.
•Highest UDP port — Enter the highest port number
of the server port range. The maximum value is
65535.
Music player
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Select Menu > Media > Music player.
With the music player, you can play music files and
create and listen to track lists. The music player
supports files with extensions such as MP3 and AAC.
84
Media applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 84 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 84 Jan 29, 2007 12:37:36 PM
Listen to music
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing.
To select a music track, select Options > Music library.
All tracks lists all music on your device. To view sorted
songs, select Albums, Artists, Genres, or Composers. To
play a track, scroll to the track, and select Options >
Play. When a track is playing, to change between play
and pause, press and . To stop a track, press .
After you add or remove music files in the device,
update your Music library. Select Options > Update
Music library. The player searches the device memory
for music files and updates them to the Music library.
To select the previous or next track, scroll the scroll key
up or down.
To play the music tracks repeatedly, select Options >
Loop. Select All to repeat all the tracks in the current
folder, One to repeat the selected track, or Off to set off
the repeating.
To play music in random order, select a folder and
Options > Random play.
To view music track information, scroll to the desired
track and select Options > View details.
Keyboard shortcuts:
•Press 5 to pause a track.
•press 4 to return to the beginning of the track. Press
within two seconds after a song has started to go to
the previous track. Press and hold to rewind.
•Press 6 to go to the next track. Press and hold to fast
forward.
•Press 8 to stop a track.
Adjust music volume
To control the music volume, press the volume keys. To
mute the volume, press the lower volume key until the
volume is muted.
Track lists
You can create a new track list and add tracks to it, or
select a saved track list.
To create a new track list, select Options > Music
library > Track lists > Options > New track list. Write
the name of the new track list, and select OK.
To add a track to a track list, open the track list, and
select Options > Add tracks.
Equalizer
Select Menu > Media > Music player > Options >
Equalizer.
You can personalize the sound of your music files with
Equalizer. You can use preset frequency settings based
on styles of music, like classical or rock. You can also
create customized settings based on your own listening
preferences.
You cannot use other functions of Music player while
Equalizer is open.
85
Media applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 85 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 85 Jan 29, 2007 12:37:36 PM
With Equalizer, you can enhance or diminish
frequencies during music playback and modify how
your music sounds. There are preset frequency settings
in your device, for example Rock.
To use a preset frequency setting when playing music,
scroll to the frequency setting you want to use, and
select Options > Activate.
Create your own frequency setting
1. To create your own frequency setting, select
Options > New preset.
2. Enter a name for the preset frequency setting, and
select OK.
3. Scroll up or down to move between the frequency
bands and set the frequency on each band. To move
between bands, scroll left or right.
4. Select Back to save the new frequency setting or
select Options > Reset to defaults to set the bands
at a neutral frequency and start over.
Recorder
Select Menu > Media > Recorder.
With Recorder, you can record up to 60 seconds of a
voice memo, save the voice recording as a sound clip,
and play the sound clip. Recorder supports the AMR
format.
Press the voice key to activate Recorder. If push to talk
is available in your network, and you have logged in to
the service, the voice key works as a push to talk key
and does not activate Recorder.
To record a voice memo, select Options > Record sound
clip. Select Pause to pause the recording and Record to
resume recording. When you finish recording, select
Stop. The sound clip is automatically saved.
The maximum length of a voice recording is 60 seconds,
but it also depends on the storage space available in
device memory or on a memory card.
Play a voice recording
To listen to a voice recording that you just recorded,
select the play icon ( ). Select Stop to cancel playback.
The progress bar displays the playing time, position,
and length of a voice recording.
To pause playback of a voice recording, select Pause.
Playback resumes when you select Play.
Voice recordings that you receive or record are
temporary files. You must save the files that you want
to keep.
Flash player
Select Menu > Media > Flash Player.
With Flash Player, you can view, play, and interact with
flash files made for mobile devices.
To open a folder or play a flash file, scroll to the folder
or file, and press the scroll key.
86
Media applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 86 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 86 Jan 29, 2007 12:37:36 PM
To send a flash file to compatible devices, scroll to it,
and press the call key. Copyright protection may prevent
the sending of some flash files.
To switch between flash files saved on your device
memory or memory card, scroll left or right.
The available options may vary.
87
Media applications
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 87 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 87 Jan 29, 2007 12:37:36 PM
Settings
Select Menu > Tools > Settings.
You can define and modify various settings of your
device. Modifying these settings affects the operation
of your device across several applications.
Some settings may be preset for the device or sent to
you in a configuration message by your network
operator or service provider. You may not be able to
change such settings.
Scroll to the setting that you want to edit, and press the
scroll key to do the following:
•Switch between two values, such as on or off.
•Select a value from a list.
•Open a text editor to enter a value.
•Open a slider to decrease or increase the value by
scrolling left or right.
Phone settings
Select Phone to change the language settings, standby
mode settings, and display settings of your device.
General settings
Select General and from the following:
•Phone language — Select a language from the list.
Changing the device language affects every
application in your device. When you change the
language, the device restarts.
•Writing language — Select a language from the list.
Changing the writing language also affects the
characters that are available when writing text.
•Welcome note / logo — Select Default to use the
default image, Text to enter a welcome note of your
own, or Image to select an image from the Gallery.
The welcome note or image is displayed briefly each
time you switch on the device.
•Orig. phone settings — Restore the original device
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
power on. Documents, contact information,
calendar entries, and files are unaffected.
Standby mode settings
Select Standby mode and from the following:
•Active standby — Select On to have shortcuts to
different applications available in the active standby
mode.
•Left selection key, Right selection key — Change the
shortcuts that open from the left and right selection
keys in the standby screen. Press scroll key, select a
function from the list, and OK.
•Navigation key right, Navigation key left, Navigat.
key down, Navigation key up, Selection
key — Change the shortcuts that open when you
88
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 88 Jan 29, 2007 12:37:36 PM
scroll to different directions. These settings are not
available if you select Active standby > On.
•Active standby apps. — Select the applications that
you want to access from the active standby.
•Active standby mailbox — Select the inbox or the
mailbox that is shown in the active standby.
•Active standby plug-ins — Select the plug-ins that
are shown in the active standby. You can, for
example, see how many voice mails you have. Even
if you switch off the active standby notifications for
missed calls and messages, the default notification
will still show them. The available plug-ins may vary.
Display settings
Select Display and from the following:
•Light sensor — Adjust the amount of light used to
illuminate the device display.
•Power saver time-out — Select the amount of time
before the screen saver is activated. Activating the
screen saver lengthens the device operating time.
•Light time-out — Set how quickly after last keypress
the display dims.
Call settings
Select Call and from the following:
•Send my caller ID — Select Yes to display your phone
number to the person you are calling or Set by
network to let the network to determine whether
your caller ID is sent.
•Send my net call ID — Set this feature on if you want
to display your net caller ID to the person you are
calling.
•Call waiting — Select Activate to be notified of a new
incoming call while you have a call in progress or
Check status to check if the function is active on the
network.
•Internet call waiting — Activate this feature to be
notified of a new incoming call while you have a net
call in progress.
•Internet call alert — Set this on if you want the device
to respond to the caller that it is busy. If you set this
off, the device emits a busy tone to the caller and you
receive a notification about the missed call.
•Default call type — Select Cellular to make normal
calls to the phone number or Internet to use VoIP to
call the number or address.
•Reject call with SMS — Select Yes to send a text
message to the person who is calling you informing
why you cannot answer their incoming call.
•Message text — Enter the text that is sent when you
cannot answer an incoming call and want to
automatically send a text message as a reply.
•Image in video call — Select Use selected to select a
still image to be displayed instead of a video during
a video call or None to not send any image during a
video call. This option is available only if your device
is equipped to work within UMTS networks and you
have UMTS network coverage. See "UMTS
(3G)," p. 54.
•Automatic redial — Select On to redial a number if it
was busy at the first call attempt. Your device makes
a maximum of 10 attempts to connect the call.
•Summary after call — Select On to briefly display the
approximate duration of the last call.
89
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 89 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 89 Jan 29, 2007 12:37:36 PM
•1-touch dialing — Select On to activate speed dialing
on your device. To dial a phone number assigned to
the speed dialing keys (2-9), press and hold the key.
See "1-touch dial," p. 35.
•Anykey answer — Select On to answer an incoming
call by briefly pressing any key, except the end key.
•Line in use — Select Line 1 or Line 2 to change the
phone line for outgoing calls and text messages
(network service). This setting is displayed only if the
SIM card supports the alternate line service and a
subscription to two phone lines.
•Line change — Select Disable to prevent line
selection (network service). To change this setting,
you need the PIN2 code.
•Internet call alert — Select Off to notify incoming net
calls that your device is busy or On to accept
incoming net calls.
Connection settings
Select Menu > Tools > Settings > Connection and
from the following:
•Access points — Set up new or edit existing access
points. Some or all access points may be preset for
your device by your service provider, and you may
not be able to create, edit, or remove them.
•Access point groups — Set up new or edit existing
access point groups that are used in automatic
connection establishment and e-mail roaming.
•Packet data — Determine when packet data
connections are used, and enter the access point if
you use your device as a modem for a computer.
•Internet tel. settings — Define settings for net calls.
•SIP settings — View or create session initiation
protocol (SIP) profiles.
•Data call — Set the time-out period after which data
call connections automatically end.
•VPN — Install and manage VPN policies, manage VPN
policy servers, see the VPN log, and create and
manage VPN access points.
•Wireless LAN — Determine if the device displays an
indicator when a wireless LAN is available, and how
often the device searches for networks.
•Configurations — View and delete trusted servers
from which your device may receive configuration
settings.
To obtain information about wireless LAN or
subscribing to a packet data service and the
appropriate connection and configuration settings,
contact your network operator or service provider.
The settings available for editing may vary.
Access points
Select Menu > Tools > Settings > Connection >
Access points.
An access point is where your device connects to the
network by way of a data connection. To use e-mail and
multimedia services or to browse web pages, you must
first define access points for these services.
An access point group is used for grouping and
prioritizing access points. An application can use a
group as a connection method instead of a single access
point. In that case, the best available access point inside
a group is used for making the connection, and in case
of e-mail, also for roaming.
90
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 90 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 90 Jan 29, 2007 12:37:36 PM
Some or all access points may be preset for your device
by your service provider, and you may not be able to
create, edit, or remove them.
See "Internet access points," p. 61.
Access point groups
Select Menu > Tools > Settings > Connection >
Access point groups.
An access point group is used for grouping and
prioritizing access points. An application can use a
group as a connection method instead of a single access
point. In that case the best available access point inside
a group is used for making connection and in case of e-
mail, also for roaming. See "Access point
groups," p. 60.
Packet data
Select Menu > Tools > Settings > Connection >
Packet data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your
device in GSM and UMTS networks, if your device is
equipped to work within UMTS networks, it is possible
to have multiple data connections active at the same
time; access points can share a data connection, and
data connections remain active (for example, during
voice calls). See "Connection manager," p. 62.
Packet data settings
The packet data settings affect all access points using a
packet data connection.
Select from the following:
•Packet data conn. — Select When available to
register the device to the packet data network when
you switch the device on in a supported network.
Select When needed to establish a packet data
connection only when an application or action
requires it.
•Access point — Enter the access point name
provided by your service provider to use the device
as a packet data modem to your computer.
These settings affect all access points for packet data
connections.
Net call settings
Select Menu > Tools > Settings > Connection >
Internet tel. settings. Select Options > New profile or
Options > Edit.
Scroll to Name, press the scroll key, enter a name for the
profile, and select OK.
Scroll to SIP profiles, press the scroll key, select a profile
and OK. SIP protocols are used for creating, modifying,
and terminating communications sessions such as net
calls with one or more participants. SIP profiles include
settings for these sessions.
To save your settings, press Back.
Data call settings
Select Menu > Tools > Settings > Connection > Data
call.
91
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 91 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 91 Jan 29, 2007 12:37:36 PM
To set the time-out period after which data calls
automatically end if no data has been transferred,
select Online time, and press the scroll key. Select User
defined to enter the time yourself or Unlimited to keep
the connection active until you select Options >
Disconnect.
VPN
VPN access points
To manage VPN access points, select VPN > VPN access
points > Options, and from the following:
•Edit — Edit the selected access point. If the access
point is in use or its settings are protected, you
cannot edit it.
•New access point — Create a new VPN access point.
•Delete — Delete the selected access point.
VPN access point settings
Contact your service provider for the correct access
point settings.
To edit VPN access point settings, select the access point
and Options.
Select from the following:
•Connection name — Enter a name for the VPN
connection. The maximum length of the name is 30
characters.
•VPN policy — Select a VPN policy to be used with this
access point.
•Internet access pt. — Select the Internet access point
to be used with this VPN access point.
•Proxy serv. address — Enter the proxy server address
of this VPN access point.
•Proxy port number — Enter the number of the proxy
port.
Wireless LAN
Select Menu > Tools > Settings > Connection >
Wireless LAN.
To have an indicator displayed when there is a wireless
LAN available in your current location, select Show
availability > Yes.
To select the time interval for your device to scan for
available wireless LANs and update the indicator, select
Scan for networks.
Advanced WLAN settings
Select Menu > Tools > Settings > Connection >
Wireless LAN > Options > Advanced settings. The
wireless LAN advanced settings are normally defined
automatically, and changing them is not
recommended.
To edit the settings manually, select Automatic
config. > Disabled, and define the following:
•Long retry limit — Enter the maximum number of
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
•Short retry limit — Enter the maximum number of
transmission attempts if the device does not receive
a clear-to-send signal from the network.
92
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 92 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 92 Jan 29, 2007 12:37:36 PM
•RTS threshold — Select the data packet size at which
the wireless LAN access point device issues a request
to send before sending the packet.
•TX power level — Select the power level of your
device when sending data.
•Radio measurements — Enable or disable the radio
measurements.
•Power saving — Enable or disable conservation of
battery power.
To restore all settings to their original values, select
Options > Restore defaults.
Security settings for wireless LAN access
points
Select Menu > Tools > Settings > Connection >
Access points. Select Options > New access point and
start to create a wireless LAN access point, or select a
wireless LAN access point and Options > Edit.
WEP security settings
In the access point settings, select WLAN security
mode > WEP.
Wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When WEP security mode is in use,
if your device receives a data packet not encrypted with
the WEP keys, the data is discarded.
In an Ad-hoc network, all devices must use the same
WEP key.
Select WLAN security sett. and from the following:
•WEP key in use — Select the desired WEP key.
•Authentication type — Select Open or Shared.
•WEP key settings — Edit the settings for the WEP key.
802.1x security settings
In the access point settings, select WLAN security
mode > 802.1x.
802.1x authenticates and authorizes devices to access
a wireless network, and prevents access if the
authorization process fails.
Select WLAN security sett.. and from the following:
•WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
•EAP plug-in settings — If you selected WPA mode >
EAP, select which EAP plug-ins defined in your device
to use with the access point.
•Pre-shared key — If you selected WPA mode > Pre-
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
The settings available for editing may vary.
WPA security settings
In the access point settings, select WLAN security
mode > WPA/WPA2.
Select WLAN security sett.. and from the following:
•WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for
device identification).
•EAP plug-in settings — If you select WPA mode >
EAP, select which EAP plug-ins defined in your device
to use with the access point.
93
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 93 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 93 Jan 29, 2007 12:37:36 PM
•Pre-shared key — If you select WPA mode > Pre-
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
The settings available for editing may vary.
EAP
To view the EAP (extensible authentication protocol)
plug-ins currently installed in your device (network
service), select Menu > Tools > Settings >
Connection > Access points. Select Options > New
access point and define an access point that uses
wireless LAN as a data bearer and 802.1x or WPA/
WPA2 as the security mode. Select WLAN security
sett. > WPA mode > EAP, scroll to EAP plug-in
settings, and press the scroll key.
The extensible authentication protocol (EAP) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options > Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select Options > Disable.
To edit the EAP plug-in settings, select Options >
Configure.
To change the priority of the EAP plug-in settings, select
Options > Raise priority to attempt to use the plug-in
before other plug-ins when connecting to the network
with the access point, or Options > Lower priority to
use this plug-in for network authentication after
attempting to use other plug-ins.
The available options may vary.
See the device help for more information on EAP
plugins.
Configurations
To view and delete configurations for trusted servers,
select Menu > Tools > Settings > Connection >
Configurations.
You can receive messages from your network operator,
service provider, or company information management
that contain configuration settings for trusted servers.
These settings are automatically saved in
Configurations. You may receive configuration settings
for access points, multimedia or e-mail services, and IM
or synchronization settings from trusted servers.
To delete configurations for a trusted server, scroll to
the server, and press the backspace key. The
configuration settings for other applications provided
by this server are also deleted.
Date and time settings
See "Clock," p. 53.
Security settings
See "Define security settings," p. 96.
94
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 94 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 94 Jan 29, 2007 12:37:36 PM
Enhancement settings
Select Menu > Tools > Settings > Enhancement.
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
With most enhancements, you can select from the
following settings:
•Default profile — Select the profile that is activated
when you attach an enhancement to your device.
•Automatic answer — Let the device answer phone
calls automatically when an enhancement is
attached. Select On to have the device answer an
incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent in the
Profiles menu, automatic answer is disabled.
•Lights — Select On to illuminate the device while it
is attached to an enhancement.
95
Settings
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 95 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 95 Jan 29, 2007 12:37:36 PM
Security
Device security
Select Menu > Tools > Settings > Security > Phone
and SIM.
You can modify the security settings for the PIN code,
automatic lock, and SIM card change, and change codes
and passwords.
Avoid using codes that are similar to emergency
numbers to prevent accidental dialing of the
emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Define security settings
To define device and SIM card settings, select a setting
and Options > Change.
When calls are limited to closed user groups, calls may
be possible to the official emergency number
programmed into your device.
Define the following settings:
•PIN code request — Select On to request that the PIN
code is entered each time the device is switched on.
This setting cannot be changed if the device is
switched off. Some SIM cards do not allow turning
off the PIN code request.
•PIN code — Change the PIN code. The PIN code must
be 4 to 8 numbers long. The PIN code protects your
SIM card against unauthorized use and is provided
with the SIM card. After three consecutive incorrect
PIN code entries, the PIN code is blocked, and you
need to use the PUK code to unblock it before you
can use the SIM card again.
•PIN2 code — Change the PIN2 code. The PIN2 code
must be 4 to 8 numbers long. The PIN2 code is
required to access some functions of the device and
is provided with the SIM card. After three consecutive
incorrect PIN2 code entries, the PIN2 code is blocked,
and you need to use the PUK2 code to unblock it
before you can use the SIM card again.
•Autolock period — Set a time-out after which the
device is automatically locked and can be used only
if the correct lock code is entered. Enter a number for
the time-out in minutes, or select None to turn off
the autolock period. When the device is locked, you
can still answer incoming calls and calls may still be
possible to the official emergency number
programmed into your device.
•Lock code — Change the lock code. The new code can
be 4-255 characters long. Both alphabets and digits
can be used, and both uppercase and lowercase
alphabets are possible. The device notifies you if the
lock code is not properly formatted. The preset code
is 12345. To avoid unauthorized use of your device,
change the lock code. Keep the new code secret and
in a safe place separate from your device.
96
Security
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 96 Jan 29, 2007 12:37:36 PM
•Lock if SIM changed — Set the device to ask for the
lock code when an unknown, new SIM card is
inserted into your device. The device maintains a list
of SIM cards that are recognized as the owner’s cards.
•Allow remote lock — If you set this option on, you
can lock the device by sending a predefined text
message from another phone. When you set this
option on, you need to enter the remote lock
message and confirm the message. The message
must be at least 5 characters long. The maximum
number of characters allowed is 8. Using more than
8 characters could prevent unlocking the memory
card and require reformatting it. If reformatting the
memory card is required, all information on the card
will be lost.
•Closed user group (network service) — Specify a
group of people to whom you can call and who can
call you.
•Confirm SIM services (network service) — Set the
device to display confirmation messages when you
are using a SIM card service.
Change the restriction password
To change the password used for restricting voice, fax,
and data calls, select Menu > Tools > Settings > Call
restriction > Cellular call restriction > Options > Edit
restr. password. Enter the current code, then the new
code twice. The restriction password must be four
digits long. For details, contact your service provider.
Fixed dialing
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Press the contacts key. Select Options > SIM contacts >
Fixed dialing contacts.
With the fixed dialing service, you can restrict calls from
your device to only certain phone numbers. Not all SIM
cards support the fixed dialing service. Contact your
service provider for more information.
Select Options, and select from the following options:
•Activ. fixed dialing — Restrict calls from your device.
To cancel the service, select Deact. fixed dialing. You
need your PIN2 code to activate and deactivate fixed
dialing or edit your fixed dialing contacts. Contact
your service provider if you do not have the code.
•New SIM contact — Add a phone number to the list
of numbers to which calls are allowed. Enter the
contact name and phone number. To restrict calls by
a country prefix, enter the country prefix in New SIM
contact. All phone numbers to which calls are
allowed must start with this country prefix.
•Add from Contacts — Copy a contact from Contacts
to your fixed dialing list.
Tip: To send text messages to the SIM contacts
while the fixed dialing service is active, you
need to add the text message center number
to the fixed dialing list.
To view or edit a phone number to which calls from your
device are allowed, select Options > SIM contacts >
Fixed dialing contacts.
97
Security
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 97 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 97 Jan 29, 2007 12:37:36 PM
To call the contact, press the call key.
To edit the phone number, select Options > Edit. You
may need your PIN2 code to edit your fixed dialing
numbers.
To delete the contact, press the backspace key.
Memory card security
You can protect a memory card with a password to
prevent unauthorized access. To set a password, select
Options > Set password. The password can be up to 8
characters long and is case-sensitive. The password is
stored in your device and you do not need to enter it
again while you use the memory card on the same
device. If you use the memory card on another device,
you are asked for the password. Not all memory cards
support password protection.
To remove the memory card password, select Options >
Remove password. When you remove the password,
the data on the memory card is not protected against
unauthorized use.
Certificate manager
Important: Even if the use of certificates makes
the risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection
by itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security
to be available. Certificates have a restricted lifetime. If
"Expired certificate" or "Certificate not valid yet" is
shown even if the certificate should be valid, check that
the current date and time in your device are correct.
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to the
listed owner.
Digital certificates are used to verify the origins of
software but do not guarantee safety. There are three
different types of certificates: authority certificates,
personal certificates, and server certificates. During a
secure connection, a server may send a server
certificate to your device. Upon receipt, it is checked
through an authority certificate stored on your device.
You receive notification if the identity of the server is
not authentic or if you do not have the correct
certificate in your device.
Download a certificate from a web site, or receive a
certificate as an e-mail attachment, or as a message
sent through a Bluetooth or infrared connection.
Certificates should be used when you connect to an
online bank or a remote server to transfer confidential
information. They should also be used if you want to
reduce the risk of viruses or other malicious software,
and to check the authenticity of software when you
download and install software to your device.
Tip: When you add a new certificate, check its
authenticity.
98
Security
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 98 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 98 Jan 29, 2007 12:37:36 PM
Mobile VPN
Select Menu > Tools > Settings > Connection >
VPN.
The Nokia mobile virtual private network (VPN) client
creates a secure connection to compatible corporate
Intranet and services, such as e-mail. Your device
connects from a mobile network, through the Internet,
to a corporate VPN gateway that acts as a front door to
the compatible corporate network. VPN client uses IP
Security (IPSec) technology. IPSec is a framework of
open standards for supporting secure exchange of data
over IP networks.
VPN policies define the method used by VPN client and
a VPN gateway to authenticate each other, and the
encryption algorithms that they use to help protect the
confidentiality of data. Contact your corporation for a
VPN policy.
To use VPN with an application, the application must be
associated with a VPN access point. A VPN access point
is made up of an Internet access point and a VPN policy.
To manage VPN, select VPN management > Options >
Open and from the following options:
•VPN policies — Install, view, and update VPN policies.
•VPN policy servers — Edit the connection settings of
VPN policy servers from which you can install and
update VPN policies.
•VPN log — View the log for your VPN policy
installations, updates and synchronizations, and
other VPN connections.
Security settings for
wireless LAN access points
See "Security settings for wireless LAN access
points," p. 93.
99
Security
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 99 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 99 Jan 29, 2007 12:37:36 PM
Shortcuts
Here are some of the available keyboard shortcuts in
your device. Shortcuts can make the use of the
applications more efficient.
Some shortcuts are application-specific and they are
not available for all applications.
General shortcuts
Power key Switch between profiles. Press
and hold to switch your device
on and off.
Menu key Open the main menu screen
for access to all applications.
Press and hold to switch
between open applications.
End key Close applications. Press and
hold to end data connections
(GPRS, data call).
E-mail key Open your default e-mail box.
Press and hold to begin
composing a new e-mail.
Active standby mode
Left selection key +
function key
Lock and unlock the keypad.
#Press and hold to switch
between the general and
silent profiles.
Call key Open the Log.
0Press and hold to open
Services and connect to the
Web.
1Press and hold to call your
voice mailbox.
Number key (2–9) Call a phone number using
speed dialing. You must first
activate speed dialing
(Menu > Tools > Settings >
Call > 1-touch dialing > On).
Function key + Chr Activate infrared.
Function key + Ctrl Activate and deactivate
Bluetooth.
In applications
Shift + scroll key Select text. Press and hold the
shift key and scroll left or right
to select text.
Ctrl+C Copy.
Ctrl+X Cut.
Ctrl+V Paste.
Ctrl+I Italics.
100
Shortcuts
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 100 Jan 29, 2007 12:37:36 PM
Ctrl+B Bold.
Press the function key
once (so that you see
) + the other key.
Enter a number or a character
marked with color on a key.
Press the function key
twice (so that you see
) + the other key.
Enter only numbers or
characters marked with color
on a key.
Shift key Switch between character
cases.
While browsing the web
#Zoom out.
*Zoom in.
1Return to bookmarks.
2Search for text strings on the
open website.
3Return to the previous page.
5Switch between your open
browser windows.
8Zoom out to show the whole
web page and outline in red
what is viewable on the
display.
9Go to a different web page.
Image viewer
Call key Send the image.
0Zoom out.
5Zoom in.
7Zoom in. Press twice for the
full screen size.
4Scroll left in the zoomed
image.
6Scroll right in the zoomed
image.
2Scroll up in the zoomed image.
8Scroll down in the zoomed
image.
3Rotate clockwise.
1Rotate counterclockwise.
*Switch between the full screen
size and normal view.
Music player
5Pause a track.
4Return to the beginning of the
track. Press within two
seconds after a song has
started to go to the previous
track. Press and hold to
rewind.
101
Shortcuts
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 101 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 101 Jan 29, 2007 12:37:36 PM
6Go to the next track. Press and
hold to fast forward.
8Stop a track.
102
Shortcuts
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 102 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 102 Jan 29, 2007 12:37:36 PM
Battery information
Your device is powered by a rechargeable battery. The
battery can be charged and discharged hundreds of
times, but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal,
replace the battery. Use only Nokia approved batteries,
and recharge your battery only with Nokia approved
chargers designated for this device.
If a replacement battery is being used for the first time
or if the battery has not been used for a prolonged
period, it may be necessary to connect the charger, then
disconnect and reconnect it to begin charging the
battery.
Unplug the charger from the electrical plug and the
device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
If the battery is completely discharged, it may take
several minutes before the charging indicator appears
on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object such as a
coin, clip, or pen causes direct connection of the positive
(+) and negative (-) terminals of the battery. (These look
like metal strips on the battery.) This might happen, for
example, when you carry a spare battery in your pocket
or purse. Short-circuiting the terminals may damage
the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a
closed car in summer or winter conditions, will reduce
the capacity and lifetime of the battery. Always try to
keep the battery between 15°C and 25°C (59°F and 77°
F). A device with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Battery performance is particularly limited in
temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of
batteries according to local regulations. Please recycle
when possible. Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event
of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. In the event of such a leak,
flush your skin or eyes immediately with water, or seek
medical help.
103
Battery information
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 103 Jan 29, 2007 12:37:36 PM
Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the
packaging, and inspect the hologram label using the
following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have
any reason to believe that your battery is not an
authentic, original Nokia battery, you should refrain
from using it, and take it to the nearest authorized
Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the
battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram
on the label, you should see the
Nokia connecting hands
symbol from one angle and the
Nokia Original Enhancements
logo when looking from
another angle.
2. When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots
on each side respectively.
3. Scratch the side of the label to
reveal a 20-digit code, for
example,
12345678919876543210.
Turn the battery so that the
numbers are facing upwards.
The 20-digit code reads
starting from the number at
the top row followed by the
bottom row.
4. Confirm that the 20-digit code
is valid by following the
instructions at
www.nokia.com/
batterycheck.
104
Nokia battery authentication guidelines
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 104 Jan 29, 2007 12:37:36 PM
What if your battery is not
authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance.
The use of a battery that is not approved by the
manufacturer may be dangerous and may result in poor
performance and damage to your device and its
enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
105
Nokia battery authentication guidelines
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 105 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 105 Jan 29, 2007 12:37:36 PM
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
•Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals
that will corrode electronic circuits. If your device
does get wet, remove the battery, and allow the
device to dry completely before replacing it.
•Do not use or store the device in dusty, dirty areas.
Its moving parts and electronic components can be
damaged.
•Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•Do not store the device in cold areas. When the
device returns to its normal temperature, moisture
can form inside the device and damage electronic
circuit boards.
•Do not attempt to open the device other than as
instructed in this guide.
•Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
•Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
•Do not paint the device. Paint can clog the moving
parts and prevent proper operation.
•Use a soft, clean, dry cloth to clean any lenses, such
as camera, proximity sensor, and light sensor lenses.
•Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may
violate regulations governing radio devices.
•Use chargers indoors.
•Always create a backup of data you want to keep,
such as contacts and calendar notes.
•To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized
service facility for service.
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you that
in the European Union all electrical and electronic
products, batteries, and accumulators must be
taken to separate collection at the end of their working
life. Do not dispose of these products as unsorted
municipal waste.
106
Care and maintenance
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 106 Jan 29, 2007 12:37:36 PM
Return the products to collection to prevent possible
harm to the environment or human health from
uncontrolled waste disposal and to promote the
sustainable reuse of material resources. Collection
information is available from the product retailer, local
waste authorities, national producer responsibility
organizations, or your local Nokia representative. For
more information, see product Eco-Declaration or
country-specific information at /www.nokia.com.
107
Care and maintenance
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 107 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 107 Jan 29, 2007 12:37:36 PM
Additional safety information
Small children
Your device and its enhancements may contain small
parts. Keep them out of the reach of small children.
Operating environment
This device meets RF exposure guidelines when used
either in the normal use position against the ear or
when positioned at least 2,2 centimeters (7/8 inches)
away from the body. When a carry case, belt clip, or
holder is used for body-worn operation, it should not
contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires
a quality connection to the network. In some cases,
transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may
be attracted to the device. Do not place credit cards or
other magnetic storage media near the device, because
information stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment,
including wireless phones, may interfere with the
functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the
medical device to determine if they are adequately
shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF
energy.
Implanted medical devices
Manufacturers of medical devices recommend that a
minimum separation of 15.3 centimeters (6 inches)
should be maintained between a wireless device and
an implanted medical device, such as a pacemaker or
implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who have
such devices should:
•Always keep the wireless device more than 15.3
centimeters (6 inches) from the medical device when
the wireless device is turned on.
•Not carry the wireless device in a breast pocket.
•Hold the wireless device to the ear opposite the
medical device to minimize the potential for
interference.
•Turn the wireless device off immediately if there is
any reason to suspect that interference is taking
place.
108
Additional safety information
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 108 Jan 29, 2007 12:37:36 PM
•Read and follow the directions from the
manufacturer of their implanted medical device.
If you have any questions about using your wireless
device with an implanted medical device, consult your
health care provider.
Hearing aids
Some digital wireless devices may interfere with some
hearing aids. If interference occurs, consult your service
provider.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems,
electronic speed control systems, and air bag systems.
For more information, check with the manufacturer, or
its representative, of your vehicle or any equipment
that has been added.
Only qualified personnel should service the device or
install the device in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly
that all wireless device equipment in your vehicle is
mounted and operating properly. Do not store or carry
flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not
place objects, including installed or portable wireless
equipment in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Potentially explosive
environments
Switch off your device when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Potentially explosive atmospheres
include areas where you would normally be advised to
turn off your vehicle engine. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points
such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical
plants; or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust, or metal
powders.
Emergency calls
Important: Wireless phones, including this
device, operate using radio signals, wireless networks,
landline networks, and user-programmed functions.
109
Additional safety information
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 109 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 109 Jan 29, 2007 12:37:36 PM
Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any
wireless device for essential communications like
medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for
adequate signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2. Press the end key as many times as needed to clear
the display and ready the device for calls.
3. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4. Press the call key.
If certain features are in use, you may first need to turn
those features off before you can make an emergency
call. If the device is in the offline or flight profile mode,
you may need to change the profile to activate the
phone function before you can make an emergency call.
Consult this guide or your service provider for more
information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless
device may be the only means of communication at the
scene of an accident. Do not end the call until given
permission to do so.
CERTIFICATION
INFORMATION (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international guidelines.
These guidelines were developed by the independent
scientific organization ICNIRP and include safety
margins designed to assure the protection of all
persons, regardless of age and health.
The exposure guidelines for mobile devices employ a
unit of measurement known as the Specific Absorption
Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over
10 grams of tissue. Tests for SAR are conducted using
standard operating positions with the device
transmitting at its highest certified power level in all
tested frequency bands. The actual SAR level of an
operating device can be below the maximum value
because the device is designed to use only the power
required to reach the network. That amount changes
depending on a number of factors such as how close
you are to a network base station. The highest SAR value
under the ICNIRP guidelines for use of the device at the
ear for device types E61i-1 (RM-227) and E61i-2
(RM-294) are as follows:
E61i-1 (RM-227): 0.90 W/kg
E61i-2 (RM-294): 0.57 W/kg
Use of device accessories and enhancements may result
in different SAR values. SAR values may vary depending
110
Additional safety information
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 110 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 110 Jan 29, 2007 12:37:36 PM
on national reporting and testing requirements and the
network band. Additional SAR information may be
provided under product information at
www.nokia.com.
For additional information, refer to the reference leaflet
included with your Nokia device.
Your mobile device is also designed to meet the
requirements for exposure to radio waves established
by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of
1.6 W/kg averaged over one gram of tissue. The highest
SAR value reported under this standard during product
certification for device types E61i-1 (RM-227) and E61i-2
(RM-294) are as follows:
When tested for use at the ear:
E61i-1 (RM-227): 0.83 W/kg
E61i-2 (RM-294): 1.12 W/kg
When worn on the body, as described in this user guide:
E61i-1 (RM-227): 0.79 W/kg
E61i-2 (RM-294): 0.81 W/kg
Information about this device model can be found at
www.fcc.gov/oet/fccid by searching the equipment
authorization system using FCC IDs: PYARM-227 and
PYARM-294.
111
Additional safety information
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 111 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 111 Jan 29, 2007 12:37:36 PM
Index
Symbols/Numerics
1-touch dialing 35
3G 54
A
access points 61, 90
answering calls 36
application manager 77
applications
common actions 12
attachments 22
audio files 83
authority certificates 98
automatic answer 95
B
blogs 70
Bluetooth
connections 55
pairing 57
settings 56
bookmarks 69
browsing Web pages 68, 71
business cards 47
C
cable 55
calculator 74
calendar 51
calling 35
calls
forwarding 36
restricting 36
settings 89
camera 80
recording a video clip 80
taking a picture 80
certificates 98
chat 27
clock 53
connecting to the Internet 61
connection manager 62
connection methods
Bluetooth 55
cable 55
infrared 59
modem 60
connections
GPRS settings 61
WLAN settings 66, 92
contact groups 46
contact information 47
contacts
adding 46
copying information 47
default information 47
groups 46
ringing tones 47
copying text 11
D
data
connections 54
declining calls 36
display
settings 89
documents 72
E
e-mail
accounts 32
messages 19
replying 22
writing 23
email data roaming 60
ending network connections 62
enhancement settings 95
equalizer 85
F
feeds 70
file manager 72
Find 16
flash player 86
forwarding calls 36
G
gallery 82
112
Index
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 112 Jan 29, 2007 12:37:36 PM
GPRS 54
access point settings 61
settings 91
I
IM 27
images
add to contacts 83
set as wallpaper 83
zooming in or out 82
infrared 59
instant messaging 27
Internet 68
access points 61
net call settings 90
settings 61
L
language 88
listening to music 84
logs 45
M
mail
See
e-mail
media applications 82
memory 12
monitoring 12
memory card 12
passwords 98
menu 10
messages
deleting 22
e-mail 19
folders 19
multimedia messages 25
picture messages 24
special messages 30
text messages 23
mobile VPN
See
VPN
modem 60
multimedia messages
creating 25
receiving 26
replying to 26
sending 25
settings 31
music player 84
N
net calls 42, 43
Nokia Team suite 49
editing teams 49
notes 74
notification light 16
P
packet data 54
access point settings 61
settings 91
pairing 57
passwords
memory card 98
pasting text 11
personal certificates 98
personalization 14, 15
phone
calls 35
language 88
settings 88
video calls 37
photos 80
picture messages 24
playing
music 84
video and audio 83
voice recordings 86
presentations 73
printing 73
profiles 14
Q
Quickoffice 72
Quickpoint 73
Quicksheet 73
Quickword 72
R
RealPlayer
playing media clips 83
settings 84
recording
calls 86
video clips 80
voice 86
rejecting calls 36
remote configuration
settings 77
remote synchronization 77
113
Index
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 113 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 113 Jan 29, 2007 12:37:36 PM
restricting
calls 36
restriction password 97
ringing tones 47
S
screen export 75
scroll key 88
Search 16
security
device 96
memory card 98
selecting text and objects 11
selection key settings 88
service commands 30
settings
Bluetooth 56
calendar 52
calls 89
connection 90
display 89
general 88
Internet 61
multimedia messages 31
profiles 14
remote configuration 77
security 96
standby 88
text messages 31
Web 70
WLAN 92
Settings Wizard 78
shortcuts 100
SIM access profile 58
SIM card
text messages 24
SMS messages 23
special messages 30
Speech 14
spreadsheets 73
standby
settings 88
storage 12
T
text
copying 11
pasting 11
selecting 11
writing 11
text messages
managing messages in the SIM
card 24
replying 24
sending 23
writing 23
themes 15
to-do list 51
track lists 85
U
UMTS (3G) 54
USB data cable 55
V
video calls 37
video clips 80, 83
virtual private network 99
voice commands 44
voice dialing 44
voice mailbox 35
voice memos 86
voice over IP 42, 43
voice recorder 86
VoIP 42, 43
volume 85
VPN 99
W
Web 68
settings 70
welcome note 88
wireless LAN
ad hoc network 65
infrastructure 65
WLAN
access point settings 66
security settings 93
settings 92
write text 11
writing language 88
114
Index
file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 114 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 114 Jan 29, 2007 12:37:36 PM