Microsoft RM-227 Quad band GSM / WCDMA cellular phone User Manual Revised

Microsoft Mobile Oy Quad band GSM / WCDMA cellular phone Revised

Revised User manual

Nokia E61i User Guide9254199Issue 1file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 1 Jan 29, 2007 12:37:36 PM
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-227 product is in compliance with the essential requirementsand other relevant provisions of Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found atwww.nokia.com/phones/declaration_of_conformity/.The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipalwaste. For more information, see product Eco-Declaration or country specific information at www.nokia.com.© 2007 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia Care, Eseries, E61i, Navi and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Nokia tuneis a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respectiveowners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.This product includes software licensed from Symbian Software Ltd © 1998-2007. Symbian and Symbian OS are trademarks of SymbianLtd.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved. Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSSOF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATIONfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 2 Jan 29, 2007 12:37:36 PM
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIMEWITHOUT PRIOR NOTICE.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer fordetails, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contraryto law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment.Model number: E61i-19254199/Issue 1file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 3 Jan 29, 2007 12:37:36 PM
ContentsFor your safety..............................................................7About your device....................................................................8Network services......................................................................8Enhancements, batteries, and chargers............................9Basic information about your device..................10Menu..........................................................................................10Scroll and make selections.................................................11Write text.................................................................................11Change the writing language............................................12Common actions in several applications........................12Memory.....................................................................................12Installing applications..........................................................13Voice aid...................................................................................13Hear your messages..............................................................14Profiles......................................................................................14Themes......................................................................................15Search........................................................................................16Notification light....................................................................16Transfer content between devices.......................17Transfer data with Bluetooth or infrared......................17Synchronize data with another device...........................18Messages......................................................................19Organize messages...............................................................19Search for messages.............................................................19E-mail messages.....................................................................19Text messages........................................................................23Multimedia messages...........................................................25Instant messaging.................................................................27Special messages...................................................................30Message settings....................................................................31Telephone....................................................................35Make a call................................................................................351-touch dial..............................................................................35Answer a call...........................................................................36Forward calls...........................................................................36Call restriction.........................................................................36Video calls................................................................................37Push to talk..............................................................................38Net calls.....................................................................................41Voice commands....................................................................44Voice mailbox..........................................................................45Log..............................................................................................45Contacts........................................................................46Manage contact groups.......................................................46Manage default information..............................................47Copy contacts between SIM and devicememory.....................................................................................47Select ringing tones for contacts......................................47Business cards.........................................................................47Nokia Team suite.......................................................49Edit teams................................................................................49Calendar........................................................................51Create calendar entries........................................................51Contentsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 4 Jan 29, 2007 12:37:36 PM
To-do..........................................................................................51Calendar views........................................................................52Add a received calendar entry to your calendar..........52Clock...............................................................................53Connectivity.................................................................54Packet data (GPRS)................................................................54UMTS (3G).................................................................................54Cable connection....................................................................55Bluetooth..................................................................................55Infrared.....................................................................................59Modem......................................................................................60Email data roaming...............................................................60Internet access points..........................................................61Connection manager............................................................62Wireless local area network (WLAN)....................64See wireless LAN availability..............................................64Wireless LAN connections...................................................64Operating modes...................................................................65WLAN wizard...........................................................................65Wireless LAN access points.................................................66Set up a wireless LAN access point manually...............66Wireless LAN settings...........................................................67Web................................................................................68Access points...........................................................................68Browse the Web.....................................................................68Bookmarks...............................................................................69Download items.....................................................................69End a connection....................................................................69News feeds and blogs..........................................................70Web settings...........................................................................70Services.....................................................................................71Office applications ....................................................72File manager...........................................................................72Quickoffice...............................................................................72Print............................................................................................73Notes..........................................................................................74Calculator..................................................................................74Converter..................................................................................74Screen export..........................................................................75Data and software management..........................77Application manager............................................................77Remote configuration network service..........................77Data synchronization............................................................77Download!................................................................................78Settings Wizard......................................................................78Camera..........................................................................80Take a picture.........................................................................80Record a video clip................................................................80Insert pictures into messages............................................81Insert videos into messages...............................................81Settings.....................................................................................81Media applications....................................................82Gallery........................................................................................82RealPlayer ................................................................................83Music player.............................................................................84Recorder....................................................................................86Flash player..............................................................................86Settings.........................................................................88Phone settings........................................................................88Contentsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 5 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 5 Jan 29, 2007 12:37:36 PM
Call settings..............................................................................89Connection settings..............................................................90Date and time settings.........................................................94Security settings.....................................................................94Enhancement settings.........................................................95Security.........................................................................96Device security .......................................................................96Memory card security...........................................................98Certificate manager...............................................................98Mobile VPN ..............................................................................99Security settings for wireless LAN accesspoints.........................................................................................99Shortcuts....................................................................100Battery information................................................103Nokia battery authentication guidelines.........104Authenticate hologram.....................................................104What if your battery is not authentic?.........................105Care and maintenance...........................................106Disposal..................................................................................106Additional safety information.............................108Small children.......................................................................108Operating environment.....................................................108Medical devices....................................................................108Vehicles...................................................................................109Potentially explosive environments..............................109Emergency calls....................................................................109CERTIFICATION INFORMATION (SAR)................................110Index............................................................................112Contentsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 6 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 6 Jan 29, 2007 12:37:36 PM
For your safetyRead these simple guidelines. Not following them maybe dangerous or illegal. Read the complete user guidefor further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it may causeinterference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your handsfree to operate the vehicle while driving.Your first consideration while driving shouldbe road safety.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device offnear medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices cancause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Donot use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the devicewhere blasting is in progress.USE SENSIBLYUse only in the positions as explained in theproduct documentation. Do not touch theantenna areas unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repairthis product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.BACK-UP COPIESRemember to make back-up copies or keepa written record of all important informationstored in your device.CONNECTING TO OTHER DEVICESWhen connecting to any other device, readits user guide for detailed safety instructions.Do not connect incompatible products.7For your safetyfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 7 Jan 29, 2007 12:37:36 PM
EMERGENCY CALLSEnsure the phone function of the device isswitched on and in service. Press the end keyas many times as needed to clear the displayand return to the standby mode. Enter theemergency number, then press the call key.Give your location. Do not end the call untilgiven permission to do so.About your deviceThe wireless device described in this guide is approvedfor use on the GSM 850/900/1800/1900, UMTS 2100network. Contact your service provider for moreinformation about networks.When using the features in this device, obey all lawsand respect local customs, privacy and legitimate rightsof others, including copyrights.Copyright protections may prevent some images, music(including ringing tones), and other content from beingcopied, modified, transferred, or forwarded.Your device supports internet connections and othermethods of connectivity. Like computers, your devicemay be exposed to viruses, malicious messages andapplications, and other harmful content. Exercisecaution and open messages, accept connectivityrequests, download content, and accept installationsonly from trustworthy sources. To increase the securityof your devices, consider installing, using, and regularlyupdating antivirus software, firewall, and other relatedsoftware on your device and any connected computer.Warning:  To use any features in this device, otherthan the alarm clock, the device must be switched on.Do not switch the device on when wireless device usemay cause interference or danger.The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewedor modified.Network servicesTo use the phone you must have service from a wirelessservice provider. Many of the features require specialnetwork features. These features are not available onall networks; other networks may require that youmake specific arrangements with your service providerbefore you can use the network services. Your serviceprovider can give you instructions and explain whatcharges will apply. Some networks may havelimitations that affect how you can use networkservices. For instance, some networks may not supportall language-dependent characters and services.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, these features will not appear on your device menu.Your device may also have a special configuration suchas changes in menu names, menu order, and icons.Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as e-mail, browsing, multimedia messages,8For your safetyfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 8 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 8 Jan 29, 2007 12:37:36 PM
and content downloading, require network support forthese technologies.Enhancements, batteries,and chargersAlways switch the device off and disconnect the chargerbefore removing the battery.Check the model number of any charger before use withthis device. This device is intended for use whensupplied with power from the AC-3, AC-4 and AC-5chargers and from ACP-7, ACP-8, ACP-9, ACP-12, LCH-12and AC-1 when used with the CA-44 adapter.Warning:  Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types mayinvalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect the powercord of any enhancement, grasp and pull the plug, notthe cord.9For your safetyfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 9 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 9 Jan 29, 2007 12:37:36 PM
Basic information about your deviceNote:  Your service provider may have requestedthat certain features be disabled or not activated inyour device. If so, they do not appear on your devicemenu. Your device may also have been speciallyconfigured for your network provider. Thisconfiguration may include changes in menu names,menu order and icons. Contact your service provider formore information.Model numbers: Nokia E61i-1 and Nokia E61i-2.The Nokia E61i-1 is equipped to work in UniversalMobile Telecommunications System (UMTS) networks,third-generation (3G) mobile communication networkswith the potential for increased data transmissionspeeds and advanced services.Hereinafter referred to as Nokia E61i.An extended version of this user guide is available onthe Nokia Web site.When you switch the device on, it may recognize theSIM card provider and configure the correct textmessage, multimedia message, and GPRS settingsautomatically. If not, contact your service provider forthe correct settings, or use the Sett. wizard application.MenuThe Menu is a starting point from which you can openall applications in the device or on a memory card. TheMenu contains applications and folders, which aregroups of similar applications. Use the scroll key to scrollup and down on the screen.Applications that you install are saved in the Installat.folder by default.To open an application, scroll to it, and press the scrollkey.To view the applications in a list, select Options >Change view > List. To return back to the grid view,select Options > Change view > Grid.To view the memory consumption of differentapplications and data stored on the device or memorycard and to check the amount of free memory, selectOptions > Memory details and the memory.To rearrange the folder, scroll to the application youwant to move, and select Options > Move. A check markis placed beside the application. Scroll to a new location,and select OK.To move an application to a different folder, scroll tothe application you want to move to another folder, andselect Options > Move to folder, the new folder, andOK.To download applications from the Web, selectOptions > App. downloads.To create a new folder, select Options > New folder.You cannot create folders inside folders.To rename a new folder, select Options > Rename.10Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 10 Jan 29, 2007 12:37:36 PM
Tip: To switch between several openapplications, press and hold the menu key. Theapplication-switching window opens anddisplays the open applications. Scroll to anapplication, and press the scroll key to switchto it.Scroll and make selectionsUse the scroll key to move and make selections. Withthe scroll key, you can move up, down, left and right inthe Menu or in different applications or lists. You canalso press the scroll key to open applications, files, oredit settings.To select text, press and hold the shift key, and scrollleft or right until you have selected the text.To select different items, such as messages, files, orcontacts, scroll up, down, left or right to highlight theitem you want to select. Select Options > Mark/Unmark > Mark to select one item or Options > Mark/Unmark > Mark all to select all items.To select an object (for example, an attachment in adocument) scroll to the object so that square markersappear on each side of the object.Write textYour device has a full keyboard. Most commonpunctuation marks either have a key of their own orthey can be entered by pressing a combination of keys.,   and   indicate the selected case.Some characters (for example, punctuation marks andsymbols) are marked with color on the keys. To inserta character marked with color, press the function key,and the key that has the character you want.To insert a number, press the function key so that   isshown on the display, and a key with a number on thecolor background. To lock the function key and insertonly numbers, press the function key twice so that is shown on the display.To erase a character, press the backspace key. Press andhold the backspace key to clear more than onecharacter.To open a list of special characters, press the Chr key.Use the scroll key to scroll through the list and select acharacter.To add characters by using other keys such as "A" or "O",press and hold the Chr key and simultaneously press theother key as many times as is needed before thecharacter you want is shown.To switch between the different character cases, pressthe shift key, so that   is shown on the display.Copy and paste text1. To select letters and words, press and hold the shiftkey. At the same time, scroll in the directionnecessary to highlight the word, phrase, or line oftext you want to copy. As the selection moves, thetext is highlighted.2. To copy the text to the clipboard, press Ctrl+C. Toinsert the text into a document, press Ctrl+V.11Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 11 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 11 Jan 29, 2007 12:37:36 PM
Change the writinglanguageWhen you write text, you can change the writinglanguage. When you are writing and press Chr+a keyseveral times to use a specific character, changing thewriting language gives you access to differentcharacters.For example, if you are writing a message using a non-Latin alphabet and want to add a person's name usingLatin alphabets, select Options > Writing language anda writing language that uses Latin characters.Common actions in severalapplicationsYou can find the following actions in severalapplications:To switch between open applications, press and holdthe menu key to see a list of open applications. Selectan application.To change the profile or switch off or lock the device,press the power key briefly.To save a file, select Options > Save. There are differentsave options depending on the application you use.To send a file, select Options > Send. There are differentsend options depending on the application you use,such as e-mail or multimedia messages and infrared orBluetooth connectivity.To print to a compatible printer, select Options >Printing options > Print. You can preview items thatyou want to print, or edit the way printed pages look.Before you can print, you must define a compatibleprinter to your device. See "Print," p. 73.To delete a file, press the backspace key, or selectOptions > Delete.MemoryThere are two types of memory into which you can savedata or install applications: device memory andremovable memory.Memory detailsSelect Menu, and Options > Memory details and Phonemem. or Memory card.You can see how much memory is currently in use, howmuch free memory remains, and how much memory isconsumed by each data type. For example, you can seehow much memory your e-mail messages, textdocuments, or calendar appointments consume.Tip: To ensure that you have adequatememory, you should regularly delete ortransfer data to a memory card or PC.Memory cardYour Nokia device supports the FAT16 and FAT32 filesystems for memory cards. If you use a memory card12Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 12 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 12 Jan 29, 2007 12:37:36 PM
from another device or if you want to ensurecompatibility of the memory card with your Nokiadevice, you may need to format the memory card withyour Nokia device. However, all data in the memory cardis permanently deleted if you format the memory card.Format a memory cardWhen a memory card is formatted, all data on the cardis lost permanently. Consult your retailer to find out ifyou must format the memory card before you can useit. To format a memory card, select Options > Formatmem. card. When formatting is complete, enter a namefor the memory card.Back up and restore to the memory cardIt is recommended to back up device memory regularlyto the memory card. The information can be restoredto your device later. To back up information from devicememory to a memory card, select Menu > Tools >Memory > Options > Backup phone mem.. To restoreinformation from the memory card to the devicememory, select Menu > Tools > Memory > Options >Restore from card.If you cannot use a memory card in your device, youmay have the wrong type of memory card, the card maynot be formatted for your device, or the card has acorrupted file system.Tip:  You can insert and remove a memory cardwithout removing the battery or switching offthe device.Installing applicationsYou can use Nokia PC Suite to install applications. NokiaPC Suite transfers the installation file to your device, andthe installation starts automatically. You can alsodownload an installation file from the web, in whichcase the installation may start automatically. If theinstallation does not start automatically, locate andselect the installation file on your device, and press thescroll key.Voice aidSelect Menu > Tools > Voice aid.The voice aid application reads text on the screen,allowing you to use basic functions of your devicewithout looking at the display.Select from the following:•Contacts — Hear the entries in your contacts list. Donot use this option if you have more than 500contacts.•Recent calls — Hear information on your missed andreceived calls, dialed numbers, and frequent calls.•Voice mailbox — Retrieve and listen to your voicemessages.•Dialer — Dial a telephone number.•Clock — Hear the current time and date.To hear more options, select Options.13Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 13 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 13 Jan 29, 2007 12:37:36 PM
Hear your messagesMessage reader readinessMessage reader reads your received text messagesaloud. The application is available in your device inEnglish. To download additional languages, visitwww.nokia.com.For additional information, refer to the reference leafletincluded with your Nokia device.Select Menu > Office > Msg. reader.Select the text message you want to be read, and selectPlay. You can also activate Msg. reader by pressing andholding the left selection key when you receive a textmessage.To start reading the next message in your Inbox, scrollright. To start reading the previous message, scroll left.To pause the reading, press the left selection key briefly.To continue, press the left selection key briefly again.To end the reading, press the end key.SpeechWith Speech you can set the language, voice and voiceproperties for Msg. reader.Select Menu > Tools > Speech.Voice propertiesTo edit the voice properties for the synthesized speech,select Menu > Tools > Speech > Voice settings.Select from the following options:•Speed — Select the desired speech rate.•Volume — Set the volume level for the speech.Voice managementTo manage the voices available for the selectedlanguage, select Menu > Tools > Speech, and scrollright.Scroll to a voice, select Options and from the following:•Play voice — Listen to the selected voice.•Voice details — View information about the voice.•Delete — Delete the selected voice.ProfilesImportant:  In the offline profile you cannot makeor receive any calls, or use other features that requirecellular network coverage. Calls may still be possible tothe official emergency number programmed into yourdevice. To make calls, you must first activate the phonefunction by changing profiles. If the device has beenlocked, enter the lock code.Select Menu > Tools > Profiles.You can adjust and customize the ringing tones, alerttones, and other device tones for different events,environments, or caller groups.To customize a profile, scroll to the desired profile inthe list, and select Options > Customize.Define the following settings:14Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 14 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 14 Jan 29, 2007 12:37:36 PM
•Ringing tone —  Select a ringing tone from the list,or select Tone downloads to open a bookmark foldercontaining a list of bookmarks for downloadingtones using the browser. To listen to the selectedtone, select Play. If you have two alternate phonelines in use, you can specify a ringing tone for eachline.•Video call tone —  Select a ringing tone for videocalls. This option is available only if your device isequipped to work within UMTS networks and youhave UMTS network coverage. See "UMTS(3G)," p. 54.•Say caller's name —  Activate the text-to-speechringing tone feature. When someone from yourcontacts list calls you, the device sounds a ringingtone that is a combination of the spoken name ofthe contact and the selected ringing tone.•Ringing type —  Select how you want the ringingtone to alert.•Ringing volume —  Select the volume level of theringing tone.•Message alert tone —  Select a tone for received textmessages.•E-mail alert tone —  Select a tone for received e-mailmessages.•Vibrating alert —  Select whether you want thedevice to vibrate when you receive a call.•Keypad tones —  Set the volume level of the devicekeypad tones.•Warning tones —  Set the warning tones on or off.•Alert for —  You can set the device to ring only uponcalls from phone numbers that belong to a selectedcontact group. Phone calls coming from outside thatgroup have a silent alert.•Profile name —  You can give a name to a new profileor rename an existing profile. The Normal andOffline profiles cannot be renamed.The Offline profile prevents your device fromaccidentally switching on, sending or receivingmessages, or using Bluetooth; it also closes anyInternet connection that may be in operation whenthe profile is selected. The Offline profile does notprevent you from establishing a wireless LANconnection at a later time, so comply with anyapplicable safety requirements when establishingand using wireless LAN connections.To change a profile, scroll to the desired profile in thelist, and select Options > Activate. If you select theOffline profile, you cannot send or receive messages oruse WLAN to read your e-mails.To create a new profile, select Options > Create new,and define the settings.ThemesSelect Menu > Tools > Themes.You can change the look of the display of your device.To change the look of the display, highlight the themeyou want to use, and select Options > Apply.To edit a theme, highlight the theme you want to edit,and select Options > Edit. Select Wallpaper to changethe background image in the standby modes, or Powersaver to use a text or the date and time as a power saverthat appears on the display when no key presses havebeen made for a some time.15Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 15 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 15 Jan 29, 2007 12:37:36 PM
To download themes, you need to establish a networkconnection that allows you to download themes fromInternet sources that are compatible with your device.To download a theme, select Theme downloads. Enterthe link from which you want to download your theme.Once the theme is downloaded you can preview,activate, or edit it.To preview a theme, highlight the theme you want topreview, and select Options > Preview. Select Apply tostart using the new theme.SearchSelect Menu > Office > Search.With Search, you can search for information in yourcontacts, notes, calendar appointments, to-do notes, e-mail messages, multimedia messages, and textmessages. You can also search for files by the file namesin your device memory and memory card.1. Select the content types you want to search in. Toremove the selection, select it again. To include allcontent types in your search, select Select all. Toremove all content types, select Unselect all.2. Enter your search keywords or some part of thekeywords. To include two words in your search,separate them with a space. You will only find itemsthat contain both keywords.3. Select Search.Tip: Wildcards may help you find items. In yoursearch keyword, use ? to substitute a singlecharacter and * to substitute zero or morecharacters. If you use the ? or * wildcard, youmust add * to the beginning and end of asearch keyword, for example, *s?all* ("shall")or *dev*ment* ("development").To view the search results from your previous search,select Options > Previous results.Notification lightYou can set the notification light on the cover of yourdevice to blink when you have received a new messageor when you have missed a phone call.To define the notification light settings, select Menu >Tools > Settings > Phone > Notification light.To set the time how long you want the notification lightto blink, scroll to Blink light for and press the scroll key.To select whether you want to be notified of new shortmessages, multimedia messages, e-mail messages, andmissed phone calls, scroll to Notified events and pressthe scroll key.16Basic information about your devicefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 16 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 16 Jan 29, 2007 12:37:36 PM
Transfer content between devicesYou can transfer content, such as contacts, from acompatible Nokia device to your Nokia E61i usingBluetooth connectivity or infrared. The type of contentthat can be transferred depends on the phone model.If the other device supports synchronization, you canalso synchronize data between the other device andyour Nokia E61i.Transfer data withBluetooth or infraredTip: If you transfer data from your previousdevice, the device may require you to insert theSIM card. Your Nokia E61i does not need a SIMcard when transferring data.To start transferring data from a compatible device,select Menu > Tools > Transfer > Transfer data.Bluetooth connectivity1. In the information view, select Continue.2. Select Via Bluetooth. Both devices must support theselected connection type.3. Activate Bluetooth in your other device, and selectContinue in your Nokia E61i to start searching fordevices with active Bluetooth connectivity.4. Select Stop in your Nokia E61i after it has found yourother device.5. Select your other device from the list. You are askedto enter a passcode (1 to 16 digits) on your NokiaE61i. The passcode is used only once to confirm thisconnection.6. Enter the code on your Nokia E61i, and select OK.Enter the passcode on your other device, and selectOK. The devices are now paired. See "Pairdevices," p. 57.For some phone models, the Transfer dataapplication is sent to your other device as amessage. To install Transfer data on your otherdevice, open the message, and follow theinstructions on the display.7. From your Nokia E61i, select the content you wantto transfer from your other device, and OK.Infrared connectivity1. In the information view, select Continue.2. Select Via infrared. Both devices must support theselected connection type.3. Connect the two devices. See "Infrared," p. 59.4. From your Nokia E61i, select the content you wantto transfer from your other device, and OK.Content is copied from the memory of the other deviceto the corresponding location in your device. Copyingtime depends on the amount of data to be transferred.You can also cancel and continue later.17Transfer content between devicesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 17 Jan 29, 2007 12:37:36 PM
The necessary steps for data transfer may varydepending on your device, and whether you haveinterrupted data transfer earlier. The items that you cantransfer vary depending on the other device.Synchronize data withanother deviceIf you have previously transferred data to your NokiaE61i, and your other device supports synchronization,you can use Transfer to keep the data of the two devicesup to date.1. Select Phones, and press the scroll key.2. Scroll to the device from which you transferred data,and press the scroll key.3. Select Synchronize, and press the scroll key. Thedevices start synchronizing using the sameconnection type that you selected when youoriginally transferred data. Only the data that youoriginally selected for data transfer is synchronized.To modify the data transfer and synchronizationsettings, select Synchronize, scroll to a device, press thescroll key, and select Edit.18Transfer content between devicesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 18 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 18 Jan 29, 2007 12:37:36 PM
MessagesSelect Menu > Messag..In Messaging (network service), you can send andreceive text messages, multimedia messages, and e-mail messages. You can also receive web servicemessages, cell broadcast messages, and specialmessages containing data, and send servicecommands.Before sending or receiving messages, you may need todo the following:•Insert a valid SIM card in the device and be locatedin a service area of the cellular network.•Verify that the network supports the messagingfeatures you want to use and that they are activatedon your SIM card.•Define Internet access point (IAP) settings on thedevice. See "Access points," p. 90.•Define e-mail account settings on the device. See "E-mail account settings," p. 32.•Define SMS settings on the device. See "Text messagesettings," p. 31.•Define MMS settings on the device. See "Multimediamessage settings," p. 31.The device may recognize the SIM card provider andautomatically configure some of the message settings.If not, you may need to define the settings manually, orcontact your service provider, network operator, orInternet service provider to configure the settings.Organize messagesTo create a new folder to organize your messages,select My folders > Options > New folder. Enter thefolder name, and select OK.To rename a folder, select the folder and Options >Rename folder. Enter the new folder name, and selectOK. You can only rename folders that you have created.To move a message to another folder, open themessage, and select Options > Move to folder, thefolder, and OK.To sort messages in a specific order, select Options >Sort by. You can sort the messages by Date, Sender,Subject, or Message type.Search for messagesTo search for a message, open the folder in which youwant to search, select Options > Find. Enter the searchterm, and select OK.E-mail messagesTo receive and send mail, you must have a remotemailbox service. This service may be offered by anInternet service provider, a network service provider, oryour company. Your device is compliant with Internet19Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 19 Jan 29, 2007 12:37:36 PM
standards IMAP4 (revision 1) and POP3, and a range ofe-mail solutions. Other e-mail providers may offerservices with different settings or features than thosedescribed here.Before you can send, receive, retrieve, reply to, andforward mail on your device, you must also do thefollowing:•Configure an Internet access point (IAP). Accesspoints may already be configured in your device. See"Access points," p. 90.•Set up an e-mail account, and define the e-mailsettings correctly. Depending on your device, youcan use the mailbox guide, settings wizard, or definethe settings manually.Follow the instructions from your remote mailbox andInternet service providers. Contact your network andInternet service providers or operator for the correctsettings.Set up your e-mail with themailbox guideIf you select Mailbox in the messaging main view andhave not set up your e-mail account, you are promptedto do so. To start setting up the e-mail account with themailbox guide, select Yes.1. To start entering the e-mail settings, select Start.2. In Mailbox type, select IMAP4 or POP3, and selectNext.Tip: POP3 is a version of the post officeprotocol that is used to store and retrievee-mail or Internet mail messages. IMAP4 isa version of the Internet message accessprotocol that lets you access and managee-mail messages while the messages arestill on the e-mail server. You can thenchoose which messages to download toyour device.3. In My e-mail address, enter your e-mail address.Select Next.4. In Incoming mail serv., enter the name of theremote server that receives your e-mail, and selectNext.5. In Outgoing mail serv., enter the name of the remoteserver that sends your e-mail, and select Next.Depending on your mobile operator, you mighthave to use your mobile operator's outgoing mailserver instead of your e-mail provider's.6. In Access point, select the Internet access point yourdevice should use when it retrieves the e-mails. Ifyou select Always ask, each time the device starts toretrieve e-mail, it asks which Internet access pointit should use, but if you select an access point, thedevice makes the connection automatically. SelectNext.Tip: If you select Select group, the devicemakes the connection automatically usingthe best available Internet access pointfrom the access point group. Select theaccess point group and Back to save theselection.7. Enter a name for your new mailbox, and selectFinish.20Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 20 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 20 Jan 29, 2007 12:37:36 PM
When you create a new mailbox, the name you give tothe mailbox replaces Mailbox in the Messag. main view.Select your default mailboxIf you have defined several mailboxes, you can selectone of them as your default mailbox. To define thedefault mailbox, select Options > Settings > E-mail >Default mailbox and the mailbox.If you have defined several mailboxes, you must selectthe mailbox that you want to use every time you startcomposing a new e-mail message.Configure the e-mail keyYour device has an e-mail key. With the e-mail key, youcan access your default e-mail inbox or open yourdefault e-mail editor from the active standby. Thefunctionality depends also on your mailbox serviceprovider.To configure the e-mail key, select Menu > Tools > E-mail key. Select the e-mail account that you want to usewith the e-mail key.Connect to mailboxE-mail addressed to you is not automatically receivedby your device, but by your remote mailbox. To readyour e-mail, you must first connect to the remotemailbox and retrieve the e-mails to your device.To retrieve received e-mail messages to your device,select your mailbox in the Messag. main view. When thedevice asks Connect to mailbox?, select Yes.To view e-mail messages in a folder, scroll to the folder,and press the scroll key. Scroll to a message, and pressthe scroll key.To retrieve e-mail messages to your device, selectOptions > Retrieve e-mail > New to retrieve newmessages that you have neither read nor retrieved,Selected to retrieve only messages you select from theremote mailbox, or All to retrieve all messages notpreviously retrieved.To disconnect from a remote mailbox, select Options >Disconnect.View e-mail offlineWorking offline means that your device is notconnected to a remote mailbox. Managing your e-mailoffline enables you to save in connection costs and workin conditions that do not allow a data connection. Anychanges you make in the remote mailbox folders whileoffline take effect in your remote mailbox the next timeyou go online and synchronize. For example, if youdelete an e-mail from your device when offline, the e-mail is deleted from the remote mailbox the next timeyou connect to the mailbox.1. Select Messag. > Options > Settings > E-mail.Select the e-mail account, and press the scroll key.Select Retrieval settings > E-mail to retrieve >Msgs. & attachs. to retrieve entire messages withtheir attachments to your device.2. Open your mailbox, and select Options > Retrievee-mail. Select New to retrieve new messages thatyou have neither read nor retrieved, Selected toretrieve only messages you select from the remote21Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 21 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 21 Jan 29, 2007 12:37:36 PM
mailbox, or All to retrieve all messages notpreviously retrieved. The device goes online andconnects to the mailbox to retrieve the mails.3. After retrieving the e-mails, select Options >Disconnect to return to the offline mode.4. To view an e-mail message, scroll to it, and press thescroll key.Some options require you to connect to your remotemailbox.Tip: To subscribe to other folders in yourremote mailbox, select E-mail settings >Retrieval settings > Folder subscriptions. E-mail in all subscribed folders is updated whenyou retrieve e-mail from your remote mailbox.Read and reply to e-mailImportant:  Exercise caution when openingmessages. E-mail messages may contain malicioussoftware or otherwise be harmful to your device or PC.To read a received e-mail, scroll to the e-mail, and pressthe scroll key.To search for an e-mail in your mailbox, select Options >Find. Enter the search term, and select OK.To open an attachment, select Options >Attachments. Scroll to the attachment, and press thescroll key.To reply only to the sender of an e-mail, open the e-mail,and select Options > Reply > To sender.To reply to all recipients of an e-mail, open the e-mail,and select Options > Reply > To all.Tip: If you reply to an e-mail that containsattached files, the attachments are notincluded in the reply. If you forward thereceived e-mail, attachments are included.To delete an attachment from an e-mail that you aresending, select the attachment and Options >Remove.To set the message priority, select Options > Sendingoptions > Priority and from the available options.To call the sender of the e-mail, open the e-mail, andselect Options > Call.To reply to the sender of the e-mail with a text messageor multimedia message, open the e-mail, and selectOptions > Create message.To forward an e-mail, open the e-mail, and selectOptions > Forward.Delete messagesTo free up memory space on your device, regularlydelete messages from the Inbox and Sent folders, anddelete retrieved e-mail messages.To delete a message, scroll to it, and press thebackspace key.You can select to delete local e-mail messages on thedevice and keep the original on the server, or you candelete both the local e-mail messages on the device andthe original messages on the server.22Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 22 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 22 Jan 29, 2007 12:37:36 PM
To delete e-mails from the device only, select Options >Delete > Phone (header remains).To delete e-mail both from the device and from theremote server, open an e-mail, and select Options >Delete > Phone and server.E-mail foldersIf you create subfolders in your IMAP4 mailboxes on aremote server, you can view and manage these folderswith your device. You can only subscribe to folders inyour IMAP4 mailboxes. Subscribing to folders in aremote mailbox allows you to view those folders onyour device.To view folders in your IMAP4 mailbox, establish aconnection, and select Options > E-mail sett. >Retrieval settings > Folder subscriptions.To view a remote folder, select a folder and Options >Subscribe. Every time you go online, the subscribedfolders are updated. This may take some time if thefolders are large.To update the list of folders, select a folder andOptions > Update folder list.Write and send e-mailTo write an e-mail, select Options > Add recipient toselect the recipients' e-mail addresses from thecontacts list, or enter the e-mail addresses in the Tofield. Use a semicolon to separate entries. Scroll down,and use the Cc field to copy other recipients, or theBcc field to blind copy recipients. In the Subject field,enter the subject of the e-mail. Enter your e-mailmessage in the text area, and select Options > Send.To attach a file to an e-mail, select Options > Insert andthe attachment you want to add. You can insert images,sound clips, notes, and other files, such as office files.To set the sending time for an e-mail message, selectOptions > Sending options > Send message. SelectImmediately or When conn. avail. if you are workingoffline.E-mail messages are stored in the Outbox beforesending. Unless the e-mail is sent immediately, you canopen the Outbox and suspend and resume sending orview the e-mail.Text messagesYour device supports the sending of text messagesbeyond the character limit for a single message. Longermessages are sent as a series of two or more messages.Your service provider may charge accordingly.Characters that use accents or other marks, andcharacters from some language options, take up morespace, limiting the number of characters that can besent in a single message.Write and send text messagesSelect Menu > Messag. > New message > Textmessage.1. In the To field, press the scroll key to selectrecipients from Contacts, or enter the recipients'mobile phone numbers manually. If you enter more23Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 23 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 23 Jan 29, 2007 12:37:36 PM
than one number, separate the numbers with asemicolon.2. Enter the text of the message. To use a template,select Options > Insert > Template.3. Select Options > Send to send the message.Reply to received text messagesTo reply to a text message, open the message from theInbox. Select Options > Reply. Enter the text of themessage, and select Options > Send.To call the sender of a text message, open the messagefrom the Inbox, and select Options > Call.Text messages on the SIM cardText messages may be stored on your SIM card. Beforeyou can view SIM messages, you must copy themessages to a folder in the device. After copying themessages to a folder, you can view them in the folderor delete them from the SIM card.Select Options > SIM messages.1. Select Options > Mark/Unmark > Mark or Mark allto mark every message.2. Select Options > Copy.3. Select a folder and OK to begin copying.To view SIM card messages, open the folder where youcopied the messages, and open a message.To delete a text message from the SIM card, select themessage, and press the backspace key.Picture messagesNote:  The picture message function can be usedonly if it is supported by your service provider. Onlycompatible devices that offer picture message featurescan receive and display picture messages. Theappearance of a message may vary depending on thereceiving device.Select Menu > Messag..To view a picture message, open the message from theInbox folder.Forward picture messages1. In the Inbox, open a picture message and selectOptions > Forward.2. In the To field, enter a recipient's number, or pressthe scroll key to add a recipient from Contacts. If youenter more than one number, separate the numberswith a semicolon.3. Enter the text of your message. The text can have120 characters. To use a template, select Options >Insert > Template.4. To send the message, press the call key.Tip: To remove the picture from the message,select Options > Remove picture.24Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 24 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 24 Jan 29, 2007 12:37:36 PM
Multimedia messagesA multimedia message (MMS) can contain text andobjects such as images, sound clips, or video clips.Only devices that have compatible features can receiveand display multimedia messages. The appearance ofa message may vary depending on the receiving device.Before you can send or receive multimedia messageson your device, you must define the multimediamessage settings. Your device may have recognized theSIM card provider and automatically configured themultimedia message settings. If not, contact yourservice provider. See "Multimedia messagesettings," p. 31.Create and send multimediamessagesSelect New message > Multimedia message.1. In the To field, press the scroll key to selectrecipients from Contacts, or enter the recipients'mobile phone numbers or e-mail addressesmanually.2. In the Subject field, enter a subject for the message.To change the fields that are visible, select Options >Address fields.3. Enter the text of the message, and select Options >Insert object to add media objects. You can addobjects such as Image, Sound clip, or Video clip.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limit,the device may make it smaller so that it can be sentby MMS.4. Each slide of your message can contain only onevideo or audio clip. To add more slides to yourmessage, select Options > Insert new > Slide. Tochange the order of slides in your message, selectOptions > Move.5. To preview a multimedia message before sendingit, select Options > Preview.6. Press the scroll key to send the multimediamessage.Create presentationsSelect New message > Multimedia message.1. In the To field, press the scroll key to selectrecipients from Contacts, or enter the recipients'mobile phone numbers or e-mail addressesmanually.2. Select Options > Create presentation and apresentation template.Tip: A template may define which mediaobjects you can include in the presentation,where they appear, and which effects aredisplayed between images and slides.3. Scroll to a text area and enter the text.4. To insert images, sound, video, or notes in yourpresentation, scroll to the corresponding objectarea, and select Options > Insert.Tip: To move between object areas, scrollup and down.25Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 25 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 25 Jan 29, 2007 12:37:36 PM
5. To add slides, select Insert > New slide.6. Select Options and from the following:•Preview — See what your multimedia presentationlooks like when it is opened. Multimediapresentations may only be viewed in compatibledevices that support presentations. They mayappear different in different devices.•Backgrnd. settings — Select the background color forthe presentation and background images fordifferent slides.•Effect settings — Select effects between images orslides.Creating multimedia presentations is not possible ifMMS creation mode is Restricted. To change MMScreation mode, select Messag. > Options > Settings >Multimedia message.The available options may vary.To send your multimedia presentation, press the scrollkey.Tip: To save the message in Drafts withoutsending it, select Done.Receive and reply to multimediamessagesImportant:  Exercise caution when openingmessages. Multimedia message objects may containmalicious software or otherwise be harmful to yourdevice or PC.Before you can send or receive multimedia messageson your device, you must define the multimediamessage settings. Your device may have recognized theSIM card provider and automatically configured themultimedia message settings. If not, contact yourservice provider. See "Multimedia messagesettings," p. 31.If you receive multimedia messages containing objectsunsupported by your device, you cannot open them.1. To reply to a multimedia message, open themessage from the Inbox, and select Options >Reply.2. Select Options > To sender to reply to the senderwith a multimedia message or Options > Via textmessage to reply to the sender with a text message.3. Enter the text of the message, and press the scrollkey to send it.View presentationsOpen the Inbox, scroll to a multimedia message thatcontains a presentation, and press the scroll key. Scrollto the presentation, and press the scroll key.To pause the presentation, press either selection keybelow the display.After you pause the presentation or playing finishes,select Options and from the following:•Open link — Open a Web link and browse the Webpage.•Activate scrolling — Scroll text or images too largeto fit on the display.•Continue — Resume playing the presentation.26Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 26 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 26 Jan 29, 2007 12:37:36 PM
•Play — Replay the presentation from the start.•Find — Find phone numbers and e-mail or Webaddresses the presentation may contain. You mayuse these numbers and addresses to make calls, sendmessages, or create bookmarks, for example.The available options may vary.View media objectsOpen the Inbox, scroll to a received multimediamessage and press the scroll key. Select Options >Objects.To view or play a media object, scroll to it, and press thescroll key.Media objects and message attachments may containviruses or other harmful software. Do not open anyobjects or attachments unless you are sure of thetrustworthiness of the sender.To save a media object in its corresponding application,scroll to the object, and select Options > Save.To send a media object to compatible devices, scroll toit, and select Options > Send.Tip: If you receive multimedia messages thatcontain media objects your device cannotopen, you may be able to send these objects toanother device such as a computer.Instant messagingSelect Menu > Connect. > IM.Instant messaging (IM) (network service) allows you toconverse with other people using instant messages andjoin discussion forums (IM groups) with specific topics.Various service providers maintain IM servers that youcan log in to after you register to an IM service. Serviceproviders may differ in their support of features.If IM is not available from your wireless service provider,it may not appear in the menu of your device. Contactyour service provider for more information aboutsigning up for IM services and costs for services. Formore information on the availability of IM settings,contact your network operator, service provider, ordealer.You may receive the settings in a special text messagefrom the network operator or service provider thatoffers the IM service. You must save the settings toaccess the service that you want to use. You can alsoenter the settings manually.Connect to an IM serverTo converse with an IM user or users, and to view andedit your IM contacts, you must log into the instantmessaging server. Open IM, and select Options >Login. Enter your user ID and password, and press thescroll key to log in. You can obtain the user name,password, and other settings to log in from your serviceprovider when you register for the service.Search IM users or IM groupsTo search for IM users and user IDs, select IM contacts >Options > New IM contact > Search. You can search by27Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 27 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 27 Jan 29, 2007 12:37:36 PM
User's name, User ID, Phone number, and E-mailaddress.To search for IM groups and group IDs, select IMgroups > Options > Search. You can search by Groupname, Topic, and Members (user ID).Conversations with a single IMuserThe Conversations view shows a list of the individualconversation participants with whom you have anongoing conversation. Ongoing conversations areautomatically closed when you exit IM.To view a conversation, scroll to a participant, and pressthe scroll key.To continue the conversation, enter your message, andpress the scroll key.To return to the conversations list without closing theconversation, select Back. To close the conversation,select Options > End conversation.To start a new conversation, select Options > Newconversation. You can start a new conversation with adifferent contact while you are inside another activeconversation. However, you cannot have two activeconversations with the same contact.To insert an image to an instant message, selectOptions > Send image, and select the image you wantto send.To save a conversation participant to your IM contacts,select Options > Add to IM contacts.To save a conversation, while in the conversation view,select Options >  Record chat. The conversation is savedas a text file that can be opened and viewed in theNotes application.To send automatic replies to incoming messages, selectOptions > Set auto reply on. You can still receivemessages.IM groupsThe IM groups view shows a list of the IM groups thatyou have saved or to which you are currently joined.IM groups is available only if you logged into an IMserver when you opened the IM application, and theserver supports IM groups.To create an IM group, select Options > Create newgroup.To join an IM group or to continue a group conversation,scroll to the group, and press the scroll key. Enter amessage, and press the call key to send it.To join an IM group that is not on the list, but for whichyou know the group ID, select Options > Join newgroup.To leave the IM group, select Options > Leave IMgroup.To remove an IM group, press the backspace key.Ban from groupsScroll to the IM group, and select Options > Group >Settings > Banned list.28Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 28 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 28 Jan 29, 2007 12:37:36 PM
To prevent IM users from joining the group, selectOptions > Add to banned list and from the following:•From IM contacts — Ban one or several of your IMcontacts.•Enter user ID — Enter the ID of the IM user.To allow a banned user to join the group, selectOptions > Remove.IM contactsWhen login to an IM service is complete, your contactlist for the service provider is retrieved automatically. Ifyour contact list is not available, wait a few minutes andtry to retrieve your contacts list manually.Tip: The online status of your IM contacts isshown by an indicator next to the contactname.To create an IM contact card, select Options > New IMcontact. Enter the user ID and a nickname, and selectDone. The user ID can be up to 50 characters, and theIM service provider may require the user ID to be in theusername@domain.com format. The nickname isoptional.To view a different list of your IM contacts, selectOptions > Change contact list.Scroll to an IM contact, select Options and from thefollowing:•Open conversation — Start or continue instantmessaging with the contact.•Contact details — View the contact card.•Editing options — Edit or delete the contact card,move it to another contact list, or receive a notewhen the contact's online status changes.•Belongs to groups — See the IM groups the contacthas joined.•New contact list — Create a contact list for a specificgroup of IM contacts.•Reload users' availab. — Update the online status ofyour IM contacts.•Blocking options — Prevent or allow the receptionof messages from the contact.•Login — Connect to an instant messaging server ifyou did not log in when you opened the application.•Logout — Disconnect from the IM server.•Settings — Edit instant messaging application orserver settings.The available options may vary.To delete an IM contact, press the backspace key.Blocked contactsSelect IM contacts > Options > Blocking options >View blocked list.To find a blocked IM user, enter the first letters of theuser's name. Matching names appear in a list.To allow receiving messages from a blocked IM user,select Options > Unblock.To prevent receiving messages from other IM users,select Options > Block new contacts. Select the IM userfrom your IM contacts, or enter the user ID.29Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 29 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 29 Jan 29, 2007 12:37:36 PM
SettingsSelect Options > Settings > IM settings.Select from the following settings:•Use screen name — To change the name thatidentifies you in IM groups, select Yes.•Allow messages from — Select to receive instantmessages from all other IM users, your IM contactsonly, or not to receive messages at all.•Allow invitations from — Select to receiveinvitations to IM groups from all IM users, your IMcontacts only, or not to receive invitations at all.•Msg. scrolling speed — To decrease or increase thespeed at which new messages are displayed, scrollleft or right.•Sort IM contacts — Select to list your IM contactsalphabetically or by their online status.•Availabil. reloading — To update the online statusof your IM contacts automatically, select Automatic.•Offline contacts — Select if IM contacts with anoffline status are shown in the IM contacts list.The settings available for editing may vary. Contact yourservice provider for more information.IM server settingsSelect Options > Settings > Server settings.Scroll to the following options, and press the scroll keyto configure your IM server:•Servers — Add new, edit, or delete servers.•Default server — Change the server to which yourdevice automatically logs into, scroll to the desiredserver, and press the scroll key.•IM login type — To establish a connection betweenyour device and the default server automatically,select Automatic. Select Auto. in home network toautomate the connection when in your homenetwork. Select On app. start-up to connect to theserver when you open the messaging application.Select Manual to connect to the server manually atany time.Special messagesYour device can receive many kinds of messages thatcontain data:•Operator logo — To save the logo, select Options >Save.•Ringing tone — To save a ring tone, select Options >Save.•Configuration message — You may receive settingsfrom your network operator, service provider, orcompany information management department ina configuration message. To accept the settings,open the message, and select Options > Save all.•E-mail notification — The note tells you how manynew e-mails you have in your remote mailbox. Anextended notification may list more detailedinformation.Send service commandsSend a service request message to your service providerand request activation for certain network services.30Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 30 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 30 Jan 29, 2007 12:37:36 PM
To send a service request to your service provider, selectOptions > Service command. Enter the service requestas a text message, and select Options > Send.Message settingsFill in all fields marked with Must be defined or with ared asterisk.Your device may recognize the SIM card provider andautomatically configure the correct text message,multimedia message, and GPRS settings. If not, contactyour service provider for the correct settings, order thesettings from your service provider in a configurationmessage, or use the Settings wizard application.Text message settingsSelect Options > Settings > Text message.Define the following:•Message centers — View the available messagecenters for your device.•Msg. center in use — Select a message center to sendthe message.•Character encoding — Select Reduced support to useautomatic character conversion to anotherencoding system when available.•Receive report — Select Yes if you want the networkto send you delivery reports on your messages(network service).•Message validity — Select the length of time that themessage center continues to resend your messageif the first attempt fails (network service). If therecipient cannot be reached within the validityperiod, the message is deleted from the messagecenter.•Message sent as — Convert the message to anotherformat, such as Text, Fax, Paging or E-mail. Changethis option only if you are sure that your messagecenter is able to convert text messages into theseother formats. Contact your network operator.•Preferred conn. — Select the preferred method ofconnection when sending text messages from yourdevice.•Reply via same ctr. — Select whether you want thereply message to be sent using the same textmessage center number (network service).Multimedia message settingsSelect Options > Settings > Multimedia message.Define the following settings:•Image size — Select Small or Large to scale imagesin multimedia messages. Select Original to maintainthe original image size of multimedia messages.•MMS creation mode — Select Restricted to have yourdevice prevent you from including content inmultimedia messages that may not be supported bythe network or the receiving device. To receivewarnings about including such content, selectGuided. To create a multimedia message with norestrictions on attachment type, select Free. If youselect Restricted, creating multimedia presentationsis not possible.•Access point in use — Select the default access pointto connect to the multimedia message center. You31Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 31 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 31 Jan 29, 2007 12:37:36 PM
may not be able to change the default access pointif it is preset in your device by your service provider.•Multimedia retrieval — Select Always automatic toalways receive multimedia messages automatically,Auto. in home network to receive notification of anew multimedia message that you can retrieve fromthe message center (for example, when you aretraveling abroad and are outside your homenetwork), Manual to retrieve multimedia messagesfrom the message center manually, or Off to preventreceipt of any multimedia messages.•Allow anon. msgs. — Select whether you want toreceive messages from unknown senders.•Receive ads — Select whether you want to receivemessages defined as advertisements.•Receive report — Select Yes to have the status of thesent message to be shown in the log (networkservice). Receiving a delivery report of a multimediamessage that has been sent to an e-mail addressmay not be possible.•Deny report sending — Select Yes to not senddelivery reports from your device for receivedmultimedia messages.•Message validity — Select the length of time that themessage center continues to resend your messageif the first attempt fails (network service). If therecipient of a message cannot be reached within thevalidity period, the message is removed from themultimedia messaging center. Maximum time is themaximum amount of time allowed by the network.E-mail account settingsSelect Menu > Messag. > Options > Settings > E-mail.If you have not defined a mailbox yet, select Mailbox inuse, and press the scroll key. The mailbox guide opensand helps you set up your e-mail account.If you have defined a mailbox, select the mailbox, andpress the scroll key to edit the settings.The settings available for editing may vary. Somesettings may be preset by your service provider.Settings for the received e-mailSelect Incoming e-mail and from the following settings:•User name — Enter the user name for the e-mailservice.•Password — Enter the password for the e-mailservice.•Incoming mail serv. — Enter the IP address or hostname of the server that receives your e-mail.•Access point in use — Select the Internet access pointthat the device uses for retrieving the e-mailmessages that you receive.•Mailbox name — Enter a name for the mailbox.•Mailbox type — Select the mailbox protocol that yourremote mailbox service provider recommends. Theoptions are POP3 and IMAP4. This setting can beselected only once and cannot be changed if youhave saved or exited from the mailbox settings. Ifyou use the POP3 protocol, e-mail messages are notupdated automatically when you are online. To seethe latest e-mail messages, you must disconnect andmake a new connection to your mailbox.32Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 32 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 32 Jan 29, 2007 12:37:36 PM
•Security (ports) — Select the security option used toincrease the security of the connection.•Port — Define a port for connection.•APOP secure login (for POP3 only) — Use with thePOP3 protocol to encrypt the sending of passwordsto the remote e-mail server while connecting to themailbox.Settings for sent e-mailSelect Outgoing e-mail and from the following settings:•My e-mail address — Enter the e-mail address givento you by your service provider. Replies to yourmessages are sent to this address.•User name — Enter the user name for the e-mailservice.•Password — Enter the password for the e-mailservice.•Outgoing mail serv. — Enter the IP address or hostname of the mail server that sends your e-mail. Youmay only be able to use the outgoing server of yournetwork operator. Contact your service provider formore information.•Access point in use — Select the Internet access pointthat the device uses for sending the e-mail messagesthat you send.•Security (ports) — Select the security option used tosecure the connection to the remote mailbox.•Port — Define a port for connection.User settingsSelect User settings and from the following settings:•My name — Enter a name to appear before your e-mail address when you send e-mail.•Reply-to — Select whether you want replies to beredirected to a different address. Select On, and enterthe e-mail address to which you want to direct thereplies. You can only enter one address.•Delete e-mails from — Select whether you want todelete the e-mails only from the device or from boththe device and the server. Select Always ask if youwant to confirm from where the e-mail should bedeleted every time you delete an e-mail.•Send message — Select to send the e-mail as soonas possible, to send it the next time you retrieve e-mail, or to store the e-mail in the outbox, from whereyou can send it later.•Send copy to self — Select whether you want to savea copy of the e-mail to your remote mailbox and tothe address defined in My e-mail address in thesettings for Outgoing e-mail.•Include signature — Select whether you want toattach a signature to your e-mail messages.•New e-mail alerts — Select whether you want toreceive the new e-mail indications (a tone and anote) when new mail is received to the mailbox.•Flash on new e-mails — Select how long you wantthe notification light to blink when you receive anew e-mail, or whether you want the notificationlight to blink at all.Retrieval settingsSelect Retrieval settings and from the followingsettings:•E-mail to retrieve (for POP3 mailboxes only) — Selectwhether you want to retrieve only the e-mail headerinformation such as sender, subject and date, e-mail,or e-mail with attachments.33Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 33 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 33 Jan 29, 2007 12:37:36 PM
•Retrieval amount — Select the number of e-mailsyou want to retrieve from the remote server to yourmailbox.•IMAP4 folder path (for IMAP4 mailboxesonly) — Define the folder path for folders to besubscribed.•Folder subscriptions (for IMAP4 mailboxesonly) — Subscribe to other folders in the remotemailbox and retrieve content from those folders.Automatic retrieval settingsSelect Automatic retrieval and from the followingsettings:•Header retrieval — Select whether you want toreceive notifications when new e-mail is received inyour remote mailbox. Select Always enabled toalways automatically retrieve new e-mail messagesfrom your remote mailbox, or Only in home net. toautomatically retrieve new e-mail messages fromyour remote mailbox only when you are in yourhome network and not, for example, traveling.•Retrieval days — Select the days on which e-mailsare retrieved to your device.•Retrieval hours — Define the hours between whichthe e-mails are retrieved.•Retrieval interval — Select the time interval betweenretrieving new e-mails.Other settingsSelect Menu > Messag. > Options > Settings >Other.Select from the following:•Save sent messages — Select whether to store sentmessages in the Sent folder.•No. of saved msgs. — Enter the number of sentmessages that you want to save. When the limit isreached, the oldest message is deleted.•Folder view — Define whether you want the list ofmessages in the folders to be shown on one row ortwo rows.•Memory in use — Select where to save your receivedmessages. You can save messages to memory cardonly if a memory card is inserted.The settings available for editing may vary.34Messagesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 34 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 34 Jan 29, 2007 12:37:36 PM
TelephoneWhen the device is locked, calls may be possible to theofficial emergency number programmed into yourdevice.To make and receive calls (network service), the devicemust be switched on, the device must have a valid SIMcard installed, and you must be located in a service areaof the cellular network. The GPRS connection is put onhold during voice calls unless the network supportsdual transfer mode or you have a USIM card and arewithin the coverage of a UMTS network.Make a callImportant:  If the device has been locked, enterthe lock code to activate the phone function. When thedevice is locked, calls may be possible to the officialemergency number. Making an emergency call in theoffline profile or when the device is locked requires thatthe device recognize the number to be an officialemergency number. It is advisable to change the profileor unlock the device by entering the lock code beforeyou make the emergency call.Enter the phone number, including the area code, andpress the call key. If you enter an incorrect character,press the backspace key. To end the call or cancel thecall attempt, press the end key.To make a call using the saved contacts, press thecontacts key. Enter the first letters of the name, scroll tothe name, and press the call key. See"Contacts," p. 46.Press the call key to view up to 20 numbers that you lastcalled or attempted to call. Scroll to the desired numberor name, and press the call key to dial the number. See"Log," p. 45.Use the volume keys to adjust the volume of an activecall.To call your voice mailbox (network service) in standbymode, press and hold 1, or press 1 then the call key.1-touch dial1-touch dialing allows you to make a call by pressingand holding a number key.Before using 1-touch dialing, select Menu > Tools >Settings > Call > 1-touch dialing > On.To assign a number key to a phone number, selectMenu > Tools > 1-touch. Scroll to the number key (2 -9) on the screen, and select Options > Assign. Select thedesired number from the Contacts directory.To remove the phone number assigned to a numberkey, scroll to the 1-touch dialing key, and selectOptions > Remove.To change a phone number assigned to a number key,scroll to the 1-touch dialing key, and select Options >Change.35Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 35 Jan 29, 2007 12:37:36 PM
Answer a callTo answer a call, press the call key.To decline the call, press the end key.To mute a ringing tone instead of answering a call,select Silence.To answer a new call during a call when the Callwaiting function is activated, press the call key. The firstcall is put on hold. To end the active call, press the endkey.Forward callsSelect Menu > Tools > Settings > Call forwarding.Forward incoming calls to your voice mailbox or toanother phone number. For details, contact your serviceprovider.1. Select a call type from the following:•Voice calls — Incoming voice calls.•Data and video calls — Incoming data and videocalls. Video calls are available only if your deviceis equipped to work within UMTS networks andyou have UMTS network coverage. See "UMTS(3G)," p. 54.•Fax calls — Incoming fax calls.2. Select one of the following call forwarding options:•All voice calls, All data and vid. calls, or All faxcalls. — Forward all incoming voice, data andvideo, or fax calls.•If busy — Forward incoming calls when you havean active call.•If not answered — Forward incoming calls afteryour device rings for a specified period of time.Define the time you let the device ring beforeforwarding the call in the Delay time: field.•If out of reach —  Forward calls when the deviceis switched off or out of network coverage.•If not available — Activate the last three settingsat the same time. This option forwards calls ifyour device is busy, not answered, or out ofreach.3. Select Activate.To check the current forwarding status, scroll to theforwarding option, and select Options > Check status.To stop forwarding voice calls, scroll to the forwardingoption, and select Options > Cancel.Call restriction and call forwarding cannot be active atthe same time.Call restrictionWhen calls are restricted, calls may be possible to theofficial emergency number programmed into yourdevice.Select Menu > Tools > Settings > Call restriction.You can restrict the calls that can be made or receivedwith the device (network service). To change thesettings, you need the restriction password from yourservice provider. Call restriction affects all calls,including data calls. Call restriction and call forwardingcannot be active at the same time.36Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 36 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 36 Jan 29, 2007 12:37:36 PM
To restrict calls, select Cellular call restriction, and selectfrom the following options:•Outgoing calls — Prevent making voice calls withyour device.•Incoming calls — Restrict incoming calls.•International calls — Prevent calling to foreigncountries or regions.•Incoming if roaming — Restrict incoming calls whenoutside your home country.•Intern. except home — Prevent calls to foreigncountries or regions, but allow calls to your homecountry.To check the status of voice call restriction, scroll to therestriction option, and select Options > Check status.To stop all voice call restrictions, scroll to a restrictionoption, and select Options > Cancel all restrict..Net call restrictionTo restrict net calls, select Menu > Tools > Settings >Call restriction > Internet call restriction.To reject net calls from anonymous callers, selectAnonymous calls > On.Video callsTo be able to make a video call, your device must beequipped to work within UMTS networks and you mustbe within coverage of a UMTS network. See "UMTS(3G)," p. 54.For availability of and subscription to video call services,contact your network operator or service provider.While talking, you can send a real-time video to therecipient's compatible mobile phone and see a real-time video sent by the recipient, if the recipient has acompatible mobile phone with a video camera. A videocall can only be made between two parties.Warning:  Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To make a video call, enter the phone number or selectthe recipient of the call from Contacts, and selectOptions > Call > Video call. You cannot convert thevideo call to a normal voice call.To answer a video call, press the call key. If Allow videoimage to be sent to caller? is shown on the display,select Yes to send a video to the caller or No to disablevideo sending.Tip: In case you do not want to send a videoduring video calls, you can send a still imageinstead. Select the still image to be sent inMenu > Tools > Settings > Call > Image invideo call > Use selected.During the call, select Options and from the following:•Audio — Talk to the recipient of the call.•Use video — See video without audio.•Loudsp. — Select to use the loudspeaker forreceiving audio.•Handset — Mute the loudspeaker and use thehandset.37Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 37 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 37 Jan 29, 2007 12:37:36 PM
Push to talkYour service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, they will not appear on your device menu. Yourdevice may also have been specially configured. Thisconfiguration may include changes in menu names,menu order, and icons. Contact your service provider formore information.Select Menu > Connect. > PTT.Push to talk (PTT) (network service) provides directvoice communication connected with the push of a key.With push to talk, you can use your device as you woulduse a walkie-talkie.You can use push to talk to have a conversation withone person or with a group of people, or to join achannel. A channel is like a chat room: you can call thechannel to see if anyone is online. The channel call doesnot alert the other participants; the participants justjoin the channel and start speaking with each other.In push to talk communication, one person talks whilethe other participants listen through the built-inloudspeaker. Participants take turns responding toeach other. Because only one participant can talk at atime, the maximum duration of a speech turn is limited.For details of the speech turn duration for your network,contact your network operator or service provider.Remember to hold the device in front of you during apush to talk call so you can see the display. Speaktowards the microphone, and do not cover theloudspeaker with your hands.Phone calls always take priority over push to talk.Before you can use push to talk, you must define thepush to talk access point and push to talk settings. Youmay receive the settings in a special text message fromthe service provider that offers the push to talk service.User settingsSelect Options > Settings > User settings.Define the following:•Incoming PTT calls — Select Notify if you want to seea notification of incoming calls. Select Auto-accept ifyou want push to talk calls to be answeredautomatically. Select Not allowed if you want pushto talk calls to be rejected automatically.•PTT call alert tone — Select Set by profile if you wantthe incoming call alert setting for push to talk tofollow your profile settings. If your profile is silent,you are not available to others using push to talk,except for callback requests.•Callback request tone — Define the ringing tone forcallback requests.•Application start-up — Select if you want to log in tothe push to talk service when you switch on yourdevice.•Default nickname — Enter your default nickname(20 characters maximum) that is displayed to otherusers.•Show my PTT address — Define if you want callersto see your push to talk address. You can let all callerssee the address, show the address only to one-to-one callers or channel participants, or hide theaddress from all callers.•Show my login status — Define whether your loginto the push to talk server is shown or hidden fromother users.38Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 38 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 38 Jan 29, 2007 12:37:36 PM
Connection settingsSelect Options > Settings > Connection settings.Define the following:•Domain — Enter the domain name obtained fromyour service provider.•Access point name — Select the push to talk accesspoint.•Server address — Enter the IP address or domainname of the push to talk server obtained from yourservice provider.•User name — Enter your user name obtained fromyour service provider.•Password — Enter a password, if required, to log intothe push to talk service. The password is provided bythe service provider.Log in to push to talk serviceIf you have set Application start-up on in Usersettings, push to talk automatically logs in to the servicewhen started. If not, you must log in manually.To log in to a push to talk service, select Options >Settings > Connection settings, and enter your Username, Password, Domain, Server address, and Accesspoint name. Select Options > Switch PTT on.When the Ringing type setting of your device is set toBeep once or Silent, or there is an ongoing phone call,you cannot make or receive push to talk calls.Push to talk callsWarning:  Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.Select Options > PTT contacts.To make a push to talk call, select one or severalcontacts from the list, and press the voice key.Remember to hold the device in front of you during apush to talk call so you can see the display. The displayinforms you when it is your turn to speak. Speaktowards the microphone, and do not cover theloudspeaker with your hands. Press and hold the voicekey the entire time you are talking. When you havefinished talking, release the key.To end the push to talk call, press the end key.When you receive a push to talk call, press the call keyto answer the call or the end key to dismiss the call.Callback requestsTo send a callback request, select Options > PTTcontacts, scroll to the desired contact, and selectOptions > Send callback request.To answer a callback request, select Show to open thecallback request. To make a push to talk call to thesender, press the voice key.39Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 39 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 39 Jan 29, 2007 12:37:36 PM
Contacts viewTo view, add, modify, delete, or call contacts, selectOptions > PTT contacts. A list of names from theContacts of your device is displayed with informationabout their login status.To call a selected contact, select Options > Talk 1 to 1.To make a group call, select Options > Make PTT groupcall.To send the contact a request to call you, selectOptions > Send callback request.Create a channelA channel is like a chat room: you can call the channelto see if anyone is online. The channel call does not alertthe other participants; the participants just join thechannel and start speaking with each other.To create a channel, select Options > New channel >Create new.Select Options and define the following:•Channel name  — Write the channel name.•Channel privacy  — Select Private or Public.•Nickname in channel  — Enter your nickname (20characters maximum) that is displayed to otherusers.•Channel thumbnail  — Insert a picture that describesthe channel.To delete a channel, press the backspace key.When you log in to push to talk, push to talkautomatically connects to the channels that were activewhen the application was last closed.Register PTT channelsTo register a channel to the push to talk service, selectOptions > Register.To edit the channel details, select Options > Edit.Participant detailsTo view the currently active participants of a channel,select Options > Active members.To view more information about a selected participant,select Options > Contact details.To call a selected contact, select Options > Talk 1 to 1.To make a group call, select Options > Make PTT groupcall.To send the contact a request to call you, selectOptions > Send callback request.To add a contact to Contacts, select Options > Add toContacts.Join a channelTo join a channel, select Options > PTT channels. Selectthe channel you want to talk to, and press the voice key.Remember to hold the device in front of you during apush to talk call so you can see the display. The displayinforms you when it is your turn to speak. Speaktowards the microphone, and do not cover theloudspeaker with your hands. Press and hold the voicekey the entire time you are talking. When you havefinished talking, release the key.40Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 40 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 40 Jan 29, 2007 12:37:36 PM
To switch between channels during multiple calls,select Swap. The active channel is highlighted.To view the currently active participants in the channel,select Options > Active members.To invite a participant to a channel, select Options >Send invitation.Push to talk logTo open the push to talk log, select Options > PTT log.The log shows the date, time, duration, and otherdetails of your push to talk calls.Exit push to talkSelect Options > Exit. Select Yes to log out and close theservice. Press No if you want to keep the applicationactive on the background.Net callsWith the net call service (network service), you canmake and receive calls over the internet.Your device supports voice calls over the internet (netcalls). Your device attempts emergency calls primarilyover cellular networks. If an emergency call usingcellular networks is not successful, your deviceattempts an emergency call through your net callprovider. Due to the established nature of cellulartelephony, you should use cellular networks foremergency calls, if possible. If you have cellular networkcoverage available, make sure that your cellular phoneis switched on and ready to make calls before youattempt an emergency call. The capability for anemergency call using internet telephony depends onthe availability of a WLAN network and your net callprovider's implementation of emergency callcapabilities. Contact your net call provider to check theinternet telephony emergency call capability.VoIP (voice over internet protocol) technology is a setof protocols that facilitate phone calls over an IPnetwork, such as the internet. VoIP phone calls can beestablished between computers, between mobilephones, and between a VoIP device and a traditionaltelephone. To make or receive a VoIP call, your devicemust be within WLAN coverage, for example.The availability of the net call service may varyaccording to your country or sales area.Define the net call settingsBefore you can make net calls, you need to define thenet call settings. After you have defined the net callsettings with these instructions, your device logs in tothe net call service automatically when you selectMenu > Connect. > Internet tel..First: define a SIP profile1. Select Menu > Tools > Settings > Connection >SIP settings > Options > Add new, and enter therequired information. You must define all availableSIP settings, but ensure that Registration is set toAlways on. Contact your net call provider for thecorrect information.2. Select Proxy server, and set Transport type to Auto.41Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 41 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 41 Jan 29, 2007 12:37:36 PM
3. Select Back until you return to the Connection menu.Second: define a net call profile1. Select Internet tel. settings > Options > Newprofile. Enter a name for the profile, and select theSIP profile you just created.2. Select Back until you return to the main menu.Third: select a preferred net call profile (optional)If you select a preferred net call profile, Internet tel.automatically uses this network profile to connect tothe net call service.1. Select Menu > Connect. > Internet tel..2. Select Preferred profile and the net call profile youjust created.3. Select Back until you return to the main menu.Tip: You can also use manual login to the netcall service. Use the same settings instructionsas with automatic login, but ensure thatRegistration is set to When needed andTransport type is set to UDP or TCP. Withmanual login, you need to manually select thenetwork used in the net call service.Connect to the net call serviceTo make or receive a net call, your device must beconnected to a net call service. Select Menu >Connect. > Internet tel..If you have selected automatic login, your deviceautomatically connects to the net call service. If youmanually login to the service, choose an availableconnection network from the list, and select Select toconnect to the net call service. The saved networks,which are marked with a star icon, are shown first onthe list. If you want to stop the connection fromestablishing, select Cancel.Select Options and from the following:•Connect to service  — to establish a connection to aservice when there is a net call service and suitableconnection network available.•Disconnect from serv. — to end the connection tothe net call service.•Change service — to choose the net call service foroutgoing calls if the device is connected to morethan one service. This option is shown only if thereis more than one configured service available.•Configure service — to configure new services. Thisoption is shown only if there are services that havenot been configured.•Save network — to save the network to which youare currently connected. The previously savednetworks are marked with a star icon on the list ofconnection networks. This option is shown only ifyou are connected to an unsaved wireless LANnetwork.•Use hidden network — to connect to a net callservice using a hidden wireless LAN network.•Refresh — to manually refresh the list of connectionnetworks. Use this option, if your wireless LANnetwork is not shown on the list. The list is alsorefreshed automatically every 15 seconds.The available options may vary.Your device can be connected only to one wireless LANaccess point at a time. If you use two or more net call42Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 42 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 42 Jan 29, 2007 12:37:36 PM
services, which use the same access point, your devicemay be connected to multiple services at the same time.The service used for outgoing net calls is shown in theview, where the connection networks are listed, andcan be changed by selecting Change service.After you have successfully connected to a service, youcan save the used wireless LAN network as a knownaccess point.Connect using a shortcutYou may have a shortcut for Internet tel. in the activestandby or you can add a shortcut if it is not available.See "Standby mode settings," p. 88. By using theshortcut, you can register manually if a net call serviceand an access point are available. If you are alreadyconnected to a net call service, the device asks if youwant to disconnect from the service.Make net callsIf you set Internet call as the preferred call type and yourdevice is connected to a net call service, calls are madeas net calls as the default.To set the preferred call type for outgoing calls, selectMenu > Connect. > Internet tel. > Options >Settings > Preferred call type > Cellular or Internetcall.You can make a net call from all applications where youcan make a regular voice call.To make a net call in the standby mode, enter the phonenumber or internet address, and press the call key.To make a net call to an address that does not start witha digit, press any number key when the device is in thestandby mode; then press the function key to clear thedisplay and to switch the device from number mode toletter mode. Write the address, and press the call key.You can also make a net call from Contacts and Log. Tomake a call from Contacts, select Menu > Contacts, andscroll to the desired contact. Select Options > Call >Internet call.To make a call from Log, select Menu > Log > Recentcalls and Missed calls, Recvd. calls or Dialed nos., andscroll to the desired contact. Select Options > Call >Internet call.Service settingsSelect Menu > Connect. > Internet tel. > Options >Settings > Settings:.Select Login type to view or change the way Internettel. connects to the net call service. Select from thefollowing:•Automatic — Login automatically to the net callservice. When a known network is found, the deviceautomatically connects to the net call service. If youuse the automatic login type for wireless LANnetworks, the device periodically scans for wirelessLAN networks, which increases the demand onbattery power and reduces the battery life.•Manual —  Login manually to the net call service.Select Saved conn. networks to view the connectionnetworks you have saved for the net call service or theconnection networks, which are recognized by the net43Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 43 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 43 Jan 29, 2007 12:37:36 PM
call service. These networks are used for automaticlogin and are marked with a star icon on the list ofconnection networks. To remove a connection networkfrom the service, select Options > Remove.Select Edit service settings to open the service-specificsettings. This option is only available if a service-specificsoftware plug-in has been installed in the device.Voice commandsSelect Menu > Tools > Voice cm..Use voice commands to make phone calls and to launchapplications, profiles, or other functions on the device.The device creates a voice tag for the entries in thecontacts list and for the functions designated in theVoice cm. application. When a voice command isspoken, the device compares the spoken words to thevoice tag in the device.Make a callThe voice tag for a contact is the name or nickname thatis saved on the contact card in Contacts. To listen to thevoice tag, open a contact card, and select Options >Play voice tag.1. To make a call using a voice command, press andhold the voice key.2. When you hear the tone or see the visual display,clearly speak the name saved on the contact card.3. The device plays a synthesized voice tag for therecognized contact in the selected device language,and displays the name and number. After a timeout,the device dials the number. If the recognizedcontact was not correct, select Next to view a list ofother matches or Quit to cancel dialing.Launch an applicationThe device creates voice tags for the applications listedin the Voice cm. application.To launch an application using a voice command, pressand hold the voice key, and clearly speak the voicecommand. If the recognized application was notcorrect, select Next to view a list of other matches orQuit to cancel.To add more applications to the list, select Options >New application.To change the voice command of an application, scrollto the application, and select Options > Changecommand. Type the new voice command, and selectOK.Change profilesThe device creates a voice tag for each profile. To set ona profile using a voice command, press and hold thevoice key, and say the name of the profile.To change the voice command, scroll to the desiredprofile, and select Profiles > Options > Changecommand.44Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 44 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 44 Jan 29, 2007 12:37:36 PM
Voice command settingsTo switch off the synthesizer that plays recognizedvoice commands in the selected device language, selectOptions > Settings > Synthesizer > Off.To reset voice recognition learning when the main userof the device has changed, select Reset voice adapts..Voice mailboxSelect Menu > Tools > Voice mail.When you open the voice mailbox application for thefirst time, you are asked to enter the number of yourvoice mailbox. To change the number, select Options >Change number. To call the number, select Options >Call voice mailbox.LogSelect Menu > Log.In the Log, you can view information about thecommunication history of the device.To receive correct log information, the device must beswitched on, the device must have a valid SIM cardinstalled, and you must be located in a service area ofthe cellular network. The GPRS connection is put on holdduring voice calls unless the network supports dualtransfer mode or you have a USIM card and are withinthe coverage of a UMTS network.Note:  The actual invoice for calls and servicesfrom your service provider may vary, depending onnetwork features, rounding off for billing, taxes, and soforth.To view the logs for recent voice calls, theirapproximate duration, and packed data connections,select Recent calls, Call timers, or Packet data; and pressthe scroll key.To sort the events by type or direction, scroll right toopen the general log, and select Options > Filter. Scrollto a filter type, and press the scroll key. Select the typeor direction, and press the scroll key.To set the time how long all communication events areheld in the log, select Options > Settings > Logduration, an option, and OK.To clear missed and received calls and dialed numbers,select Recent calls > Options > Clear recent calls.45Telephonefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 45 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 45 Jan 29, 2007 12:37:36 PM
ContactsPress the contacts key.Manage all of your contact information, such as phonenumbers and addresses. Add a personal ringing tone,voice tag, or a thumbnail image to a contact. Sendcontact information to compatible devices or receivecontact information as business cards from compatibledevices, and add them to your own list of contacts.To add a contact, select Options > New contact. Enterthe contact information, and select Done.To edit information in a contact card, scroll to thecontact, and select Options > Edit > Options. Selectfrom the following:•Add thumbnail — Add a thumbnail image that willdisplay when a contact calls you. The image must bepreviously saved to your device or memory card.•Remove thumbnail — Remove the image from thecontact card.•Add detail — Add fields of information to a contactcard, such as Job title.•Delete detail — Delete any details that you added toa contact card.•Edit label — Edit the field names of the contact card.Manage contact groupsCreate a contact group so that you can send text or e-mail messages to several recipients at the same time.1. Scroll to the right, and select Options > Newgroup.2. Enter a name for the group or use the default name,and select OK.3. Open the group, and select Options > Addmembers.4. Scroll to each contact you want to add to the group,and press the scroll key to mark it.5. Select OK to add all marked contacts to the group.The following options are available when you selectOptions in the contact groups view:•PTT options — Make a push to talk call either toan individual or to a group, or send a callbackrequest.If push to talk is not available from your wirelessservice provider, it may not appear in the menuof your device.•Open — Open the contact group and view thegroup members.•Create message — Send a message.•New group — Create a new contact group.•Delete — Delete a contact group.•Rename — Rename the contact group.•Ringing tone — Assign a ringing tone to a contactgroup.•Contacts info — View the information for acontact group.46Contactsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 46 Jan 29, 2007 12:37:36 PM
•Settings — Set the name display settings forcontact group members.Manage defaultinformationAssign a default number or address to a contact so youcan easily call or send a message to the default numberor address, even if several numbers or addresses aresaved to that contact.To change default information for a contact, open thecontact, and select Options > Defaults. Select thenumber or address you want to set as a default, andselect Assign.The default number or address is underlined in thecontact.Copy contacts between SIMand device memoryTo copy contacts from a SIM card to device memory,select Options > SIM contacts > SIM directory to openthe SIM directory. Mark the contacts you want to copy,or select Mark all to copy all contacts. Select Options >Copy to Contacts.To copy contacts from the device memory to a SIM card,select Options > Copy to SIM direct.. Mark the contactsyou want to copy, or select Mark all to copy all contacts.Select Options > Copy to SIM direct..Select Options > SIM contacts > SIM directory to seethe names and numbers stored on the SIM card. In SIMdirectory you can add, edit, or copy numbers toContacts, and you can make calls.Select ringing tones forcontactsSelect a ringing tone for a contact or contact group. Ifthe caller's phone number is sent with the call and yourdevice recognizes the number, the ringing tone playswhen the contact calls you.To select a ringing tone for a contact or contact group,open the contact or contact group, and select Options >Ringing tone. A list of ringing tones opens. Select theringing tone you want to use.To remove the ringing tone, select Default tone fromthe list of ringing tones.Business cardsPress the contacts key.You can send, receive, view, and save contact cards asbusiness cards in vCard or Nokia Compact Business Cardformat.You can send business cards to compatible devicesusing SMS, MMS, or e-mail, or an infrared or Bluetoothconnection.To send a business card, select the contact card fromthe contacts list, and select Options > Send. Select Via47Contactsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 47 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 47 Jan 29, 2007 12:37:36 PM
text message, Via multimedia, Via e-mail, ViaBluetooth, or Via infrared. Enter the phone number oraddress, or add a recipient from the contacts list. SelectOptions > Send. If you select SMS as the sendingmethod, contact cards are sent without images.To view a received business card, select Show from thedisplayed notification, or open the message from theinbox folder in Messag..To save a business card, select Options > Save businesscard when the incoming message appears on thedevice.To save a received business card, select Options > Savebusiness card.To delete a received business card, select Options >Delete.48Contactsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 48 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 48 Jan 29, 2007 12:37:36 PM
Nokia Team suiteSelect Menu > Office > Team suite.With Nokia Team Suite, you can create, edit, and deleteteams, and send messages, view teams' web pages andcommunication history, and make phone calls to teamsat one go.To create a new team, select Options > Team > Createnew. Give a name for the team and enter the conferencecall service information, if needed. Then select themembers for the team.To select an action, select the team to which you wantto apply the action, scroll right to the action bar, andselect the desired action. If you do not want to applythe action to all team members, open the team, andselect the desired members by pressing the scroll key.Then select the action.To find more actions than shown on the action bar,select Options > Actions. The following actions areavailable:•Call — Make a phone call to the team or selectedteam members. The team members are called oneby one and put on hold until the calls can be mergedinto a conference call (network service). Themaximum number of participants depends on thenetwork service.•Create message — Send a text message, amultimedia message, or an e-mail to the team orselected team members.•Call conference service — Start a call to theconference call service (network service) defined forthe selected team.•Communication log — View the communication logfor the team or selected team members.•Team search — Search for content related to theteam or team members.•Push to talk — Communicate via push to talk(network service) with the team or selected teammembers.If Push to talk is not available from your wirelessservice provider, it may not appear in the menu ofyour device.•Team Web bookmarks — Open the bookmark folderthat contains the team's web pages.To select which actions are shown in the action bar andin which order, select Options > Settings > Action baricons.Edit teamsTo add team members, select Options > Members >Add.To remove team members, select Options >Members > Remove.To edit the details of a member, select Options >Members > Edit.49Nokia Team suitefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 49 Jan 29, 2007 12:37:36 PM
To select whether to see the team members' pictureson the display, select Options > Settings > Viewcontact image.To see to which teams a member belongs, selectOptions > Members > Belongs to teams.50Nokia Team suitefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 50 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 50 Jan 29, 2007 12:37:36 PM
CalendarSelect Menu > Calendar.In Calendar, you can create and view scheduled eventsand appointments. You can also set alarms for calendarentries.You can synchronize your calendar data with acompatible computer using Nokia PC Suite. Forinformation on synchronization, see the PC Suite guide.Create calendar entriesYou can create four types of calendar entries:•Meeting entries have a specific date and time.•Memo entries are related to the whole day but notto a specific time of the day. Memo entries do notappear in the weekly time schedule view.•Anniversary entries remind you of birthdays andspecial dates. They refer to a certain day but not aspecific time of the day. Anniversary entries arerepeated every year.•To-do entries remind you of a task that has a duedate but not a specific time of the day.To create a calendar entry, scroll to a date, and selectOptions > New entry. Select an entry type. Availablesettings for meeting, memo, anniversary, and to-doentries vary.To open and edit an existing entry, scroll to the entry,and select Options > Open. Edit the details in thevarious fields.Tip:  When you edit or delete a repeated entry,choose how you want the change to take effect.If you select All calendar entries deleted, allrepeated entries are deleted. If you selectDelete entry, only the current entry is deleted.To-doYou can create and maintain a task or list of tasks thatmust be done by a certain day. Each task can beassigned a due date, and an alarm.To open the list of to-do notes, select Options > To-doview.To add a to-do note, select Options > New entry > To-do. Start to write the task in the Subject field. You canset a due date for the task, create an alarm for it, andspecify a priority. The priority icons are ( ! ) High and ( - )Low. There is no icon for Normal.To mark a task as completed, scroll to the task in the to-do list, and select Options > Mark as done.To restore a task, scroll to it in the todo list, and selectOptions > Mark as not done.51Calendarfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 51 Jan 29, 2007 12:37:36 PM
Calendar viewsTo switch between the different calendar views, selectOptions in any calendar view. Select a type of view fromthe list.To set the default calendar view, select Options >Settings > Default view > Month view , Week view,Day view, or To-do view.To view a specific date in the calendar view, selectOptions > Go to date. Enter the date, and select OK.Add a received calendarentry to your calendarYou can receive a calendar entry as an attachment to amultimedia or e-mail message.To add a received calendar entry to your calendar, openthe calendar entry attachment in the message, andselect Options > Save to Calendar. The entry is addedto your default calendar.52Calendarfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 52 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 52 Jan 29, 2007 12:37:36 PM
ClockSelect Menu > Office > Clock.To change the clock type, select Options > Settings >Clock type > Analog or Digital.Date and time settingsTo change the date and time, their display formats,alarm tone, and to define whether you want to useautomatic time update, select Options > Settings andfrom the following:•Time — Enter the time, and select OK.•Time zone — Enter the time zone, and select OK.•Date — Enter the date, and select OK.•Date format — Change how the date is displayed.Scroll to the desired format, and select OK.•Date separator — Change the symbol that separatesdays, months, and years. Scroll to the symbol youwant, and select OK.•Time format — Select 24-hour or am/pm.•Time separator — Select the symbol that separateshours and minutes.•Clock type — Select Analog or Digital.•Clock alarm tone — Select the tone that you want touse for the alarm clock.•Network operator time — Update time, date, andtime zone information automatically (networkservice). Select Auto-update to activate. This servicemay not be available in all networks.Alarm clockIf the alarm time is reached while the device is switchedoff, the device switches itself on and starts sounding thealarm tone. If you select Stop, the device asks whetheryou want to activate the device for calls. Select No toswitch off the device or Yes to make and receive calls.Do not select Yes when wireless phone use may causeinterference or danger.To set an alarm, select Options > Set alarm. Enter thealarm time, and select OK.To view and change alarms, select Options > Resetalarm.To remove an alarm, select Options > Remove alarm.53Clockfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 53 Jan 29, 2007 12:37:36 PM
ConnectivityYour service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, they will not appear on your device menu. Yourdevice may also have been specially configured. Thisconfiguration may include changes in menu names,menu order, and icons. Contact your service provider formore information.Your device offers several options (network services) toconnect to the Internet, a corporate intranet, or toanother device or PC. Wireless methods include wirelessLAN, Bluetooth, and infrared. Your device supports awired solution with a USB (Universal Serial Bus) cableconnection for Nokia PC Suite. Your device also allowsyou to communicate using net calls (Voice over IP),instant messaging (chat), and modem-basedconnections. If it is available within your network, youmay also communicate using the push to talk feature.Packet data (GPRS)GPRS (general packet radio service) enables wirelessaccess for mobile phones to data networks (networkservice). GPRS uses packet data technology whereinformation is sent in short bursts of data over themobile network. The benefit of sending data in packetsis that the network is occupied only when sending orreceiving data. As GPRS uses the network efficiently, itallows for quick data connection set-up and fast datatransmission speeds.You must subscribe to the GPRS service. For availabilityand subscription to GPRS, contact your networkoperator or service provider.Enhanced GPRS (EGPRS) is similar to GPRS, but it enablesfaster connection. For more information on theavailability of EGPRS and data transfer speed, contactyour network operator or service provider. Note thatwhen you have selected GPRS as a data bearer, thedevice uses EGPRS instead of GPRS if this is available inthe network.During a voice call, you cannot establish a GPRSconnection, and any existing GPRS connection is put onhold unless the network supports dual transfer mode.UMTS (3G)Universal Mobile Telecommunications System (UMTS) isa third-generation (3G) mobile communication system.Besides voice and data, UMTS enables audio and videodelivery to wireless devices.If your device is equipped to work within UMTSnetworks, it can automatically switch between the GSMand UMTS networks. See "Basic information about yourdevice," p. 10.To select which network to use, select Menu > Tools >Settings > Network and the network in Networkmode. If you want the device to switch between thenetworks automatically, select Dual mode.54Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 54 Jan 29, 2007 12:37:36 PM
The GSM network is indicated with  , the UMTSnetwork with  .When you use your device in GSM and UMTS networks,multiple data connections can be active at the sametime, and access points can share a data connection. Inthe UMTS network, data connections remain activeduring voice calls. You can, for example, browse theWeb faster than previously possible whilesimultaneously speaking on the phone.Cable connectionInstall the USB data cable driver to your PC before youuse a cable connection. You can use the Data transferwithout installing the USB data cable drivers.Select Menu > Connect. > Data cbl..Using a USB data cable, you can connect your device toa compatible PC . Connect the USB data cable to thebottom of the device. To change the device type younormally connect to your device with the data cable,press the scroll key.Select from the following:•Ask on connection — Select whether you want to beasked for the device type every time you connect thedata cable to your device.•PC Suite — Connect the PC Suite to your device withthe data cable, and use your device as a modem.•Data transfer — Access and transfer data such asmusic or image files from your computer using thedata cable connection. To use the Data transfermode, make sure that you have not selected USB asa connection type in the Manage connectionssettings in Nokia PC Suite. Insert a memory card toyour device, connect the device to a compatiblecomputer with the USB data cable, and select Datatransfer when the device asks which mode is used.In this mode, your device acts as a mass storagedevice and you can see it as a removable hard drivein your computer. The device will switch into theOffline profile if this is selected. End the connectionfrom the PC (for example, from an Unplug or EjectHardware wizard in Windows) to avoid damagingthe memory card. After you end the connection, thedevice returns to the profile in which it was beforeusing the data transfer mode.BluetoothThis device is compliant with Bluetooth Specification1.2 supporting the following profiles: Generic AccessProfile, Serial Port Profile, Dial-up Networking Profile,Headset Profile, Handsfree Profile, Generic ObjectExchange Profile, Object Push Profile, File TransferProfile, SIM Access Profile, and Basic Imaging Profile.. Toensure interoperability between other devicessupporting Bluetooth technology, use Nokia approvedenhancements for this model. Check with themanufacturers of other devices to determine theircompatibility with this device.Bluetooth technology enables wireless connectionsbetween electronic devices within a range of 10 meters(33 feet). A Bluetooth connection can be used to sendimages, videos, texts, business cards, calendar notes, orto connect wirelessly to devices using Bluetoothtechnology, such as computers.55Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 55 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 55 Jan 29, 2007 12:37:36 PM
Since devices using Bluetooth technologycommunicate using radio waves, your device and theother devices do not need to be in direct line-of-sight.The two devices only need to be within a maximum of10 meters of each other, although the connection canbe subject to interference from obstructions such aswalls or from other electronic devices.Start using Bluetooth connectivityThere may be restrictions on using Bluetoothtechnology in some locations. Check with your localauthorities or service provider.Features using Bluetooth technology, or allowing suchfeatures to run in the background while using otherfeatures, increase the demand on battery power andreduce the battery life.Select Menu > Connect. > Bluetooth.To activate Bluetooth, press the function key and theCtrl key simultaneously. To deactivate, press thefunction key and the Ctrl key again. If you use thisshortcut to activate Bluetooth, you will not be asked toname your device.1. When you activate Bluetooth for the first time, youare asked to give a name to your device. Give yourdevice a unique name to make it easy to recognizeif there are several Bluetooth devices in the vicinity.2. Select Bluetooth > On.3. Select My phone's visibility > Shown to all.Your device and the name you entered can now be seenby other users with devices using Bluetoothtechnology.SettingsDefine the following settings:•Bluetooth — Select On to be able to connect toanother compatible device using Bluetoothconnectivity.•My phone's visibility — Select Shown to all to allowother devices using Bluetooth technology to findyour device when you have set Bluetooth > On. Toprevent other devices from finding your device,select Hidden. Even if you select Hidden, paireddevices can still detect your device.•My phone's name — Enter a name for your device.The name is visible to other devices that search fordevices using Bluetooth technology. The maximumlength of the name is 30 characters.•Remote SIM mode — Select On to enable anotherdevice, such as a compatible car kit enhancement, touse the SIM card in your device to connect to thenetwork. See "SIM access profile," p. 58.If Bluetooth was turned off as a result of entering theOffline profile, you must re-enable Bluetooth manually.Security tipsWhen you are not using Bluetooth connectivity, selectBluetooth > Off or My phone's visibility > Hidden.Do not pair with an unknown device.Send dataSeveral Bluetooth connections can be active at a time.For example, if you are connected to a headset, you can56Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 56 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 56 Jan 29, 2007 12:37:36 PM
also transfer files to another compatible device at thesame time.1. Open the application where the item you want tosend is stored.2. Select the item, and select Options > Send > ViaBluetooth. The device searches for other devicesusing Bluetooth technology within range and liststhem.Tip: If you have sent data using Bluetoothbefore, a list of the previous search resultsis displayed. To search for more Bluetoothdevices, select More devices.3. Select the device with which you want to connect,and press the scroll key to set up the connection. Ifthe other device requires pairing before data can betransmitted, you are asked to enter a passcode.4. When the connection has been established, Sendingdata is shown.The Sent folder in Messag. does not store messages sentusing Bluetooth connectivity.Bluetooth connectivity indicators  Bluetooth is active.  When the icon is blinking, your device is trying toconnect to the other device. When the icon is showncontinuously, the Bluetooth connection is active.Pair devicesSelect Menu > Connect. > Bluetooth, and scroll rightto open the Paired devices page.Before pairing, create your own passcode (1-16 digits),and agree with the user of the other device to use thesame code. Devices that do not have a user interfacehave a fixed passcode. You need the passcode onlywhen you connect the devices for the first time. Afterpairing, it is possible to authorize the connection. See"Authorize a device," p. 58. Pairing and authorizingthe connection makes connecting quicker and easier,as you do not have to accept a connection betweenpaired devices every time you establish the connection.The passcode for remote SIM access must have 16 digits.1. Select Options > New paired device. The devicestarts to search for Bluetooth devices within range.Tip: If you have sent data using Bluetoothbefore, a list of the previous search resultsis displayed. To search for more Bluetoothdevices, select More devices.2. Select the device with which you want to pair, andenter the passcode. The same passcode must beentered to the other device as well.3. Select Yes to make the connection between yourdevice and the other device automatic or No toconfirm the connection manually every time aconnection attempt is made. After pairing, thedevice is saved to the paired devices page.To give a nickname to a paired device that is onlydisplayed in your device, scroll to the device with which57Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 57 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 57 Jan 29, 2007 12:37:36 PM
you have paired, and select Options > Assign shortname.To delete a pairing, select the device whose pairing youwant to delete and Options > Delete. To delete allpairings, select Options > Delete all.Tip: If you are currently connected to a deviceand cancel the pairing with that device, pairingis removed immediately, and the connection isswitched off.Authorize a deviceIf you trust a paired device, you can allow it to connectautomatically to your device. You can select from thefollowing options:•Set as authorized — Connections between yourdevice and the other device can be made withoutyour knowledge. No separate acceptance orauthorization is needed. Use this status for your owndevices, such as your compatible headset or PC, ordevices that belong to someone you trust.•Set as unauthorized — Connection requests from theother device must be accepted separately everytime.Receive dataIf you want to receive data using Bluetooth, selectBluetooth > On and My phone's visibility > Shown toall. When you receive data through Bluetoothconnectivity, a tone sounds, and you are asked if youwant to accept the message. If you accept, the messageis placed in the Inbox folder in Messag.Tip: You can access the files in the device or onthe memory card using a compatible accessorythat supports the File Transfer Profile Clientservice (for example, a laptop computer).SIM access profileWhen the wireless device is in the remote SIM mode,you can only use a compatible connected enhancement,such as a car kit, to make or receive calls. Your wirelessdevice will not make any calls, except to the emergencynumbers programmed into your device, while in thismode. To make calls from your device, you must firstleave the remote SIM mode. If the device has beenlocked, enter the lock code to unlock it first.With the SIM access profile, you can access the SIM cardof your device from a compatible car kit device. Thisway, you do not need a separate SIM card to access SIMcard data and connect to the GSM network.To use the SIM access profile, you need the following:•Compatible car kit device that supports Bluetoothwireless technology•Valid SIM card in your deviceFor more information about car kit devices andcompatibility with your device, see www.nokia.comand your car kit user guide.For additional information, refer to the reference leafletincluded with your Nokia device.Manage the SIM access profile1. Select Menu > Connect. > Bluetooth to activateBluetooth connectivity in your device.58Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 58 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 58 Jan 29, 2007 12:37:36 PM
2. To enable remote SIM access, scroll to Remote SIMmode, and press the scroll key.3. Activate Bluetooth in the car kit device.4. Use your car kit device to start a search forcompatible devices. For instructions, see the userguide of your car kit device.5. Select your device from the list of compatibledevices.6. To pair the devices, enter the Bluetooth passcodeshown on the display of the car kit device to yourdevice.7. Authorize the car kit device. Select Menu >Connect. > Bluetooth, and scroll to the Paireddevices page. Scroll to the car kit device, and enterthe Bluetooth passcode. When the device asks tomake the connection automatic, select Yes.Connections between your device and the car kitdevice can be made without separate acceptance orauthorization. If you select No, connection requestsfrom this device must be accepted separately everytime.Tip: If you have already accessed the SIM cardfrom the car kit with the active user profile, thecar kit searches automatically for a device withthe SIM card. If it finds your device, andautomatic authorization is activated, the cardevice automatically connects to the GSMnetwork when you switch on the car ignition.When you activate the remote SIM access profile, youcan use applications on your device that do not neednetwork or SIM services.To end the remote SIM access connection from yourdevice, select Menu > Connect. > Bluetooth > RemoteSIM mode > Off.InfraredDo not point the infrared (IR) beam at anyone's eye orallow it to interfere with other IR devices. This device isa Class 1 laser product.Use infrared to connect two devices and transfer databetween them. With infrared, you can transfer datasuch as business cards, calendar notes, and media fileswith a compatible device.Send and receive data1. Ensure that the infrared ports of the devices faceeach other. The positioning of the devices is moreimportant than angle or distance.2. Select Menu > Connect. > Infrared, and press thescroll key to turn on infrared on your device. Turnon infrared on the other device.Tip: You can also turn on infrared bypressing the function key and the Chr keysimultaneously.3. Wait a few seconds until an infrared connection isestablished.4. To send, locate the desired file in an application orthe file manager, and select Options > Send > Viainfrared.If data transfer is not started within 1 minute after theactivation of the infrared port, the connection iscancelled and must be started again.59Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 59 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 59 Jan 29, 2007 12:37:36 PM
All items received through infrared are placed in theInbox folder in Messag..Positioning devices away from each other breaks aconnection, but the infrared light beam remains activeon your device until it is deactivated.ModemSelect Menu > Connect. > Modem.Together with a compatible computer, you can use yourdevice as a modem to connect to the Web.Before you can use your device as a modem•You must subscribe to the appropriate networkservices from your service provider or Internetservice provider.•You need a compatible computer with infraredconnectivity.•You must have Nokia PC Suite installed on yourcomputer.•You must have the appropriate drivers installed onyour computer. You may need to install or updateinfrared drivers. After you have installed Nokia PCSuite, follow the instructions on the computerdisplay to install the drivers and connect your deviceto the computer.After you have installed Nokia PC Suite and theappropriate drivers, start Nokia PC Suite on yourcomputer. Select Connect to the Internet, and follow theinstructions on the computer display.To connect the device to a compatible computer usinginfrared, press the scroll key. Make sure the infraredports of the device and computer are directly facingeach other with no obstacles between them.You may not be able to use some of the othercommunication features when the device is used as amodem.Email data roamingSelect Menu > Tools > Settings > Connection >Access point groups.Your device allows roaming between wireless accesstechnologies, such as WLAN and GPRS, for e-mail. Forexample, you can start an e-mail session at home andcontinue the session on your way to work. While yoursession continues uninterrupted, your handheld deviceswitches from WLAN to GPRS and back to WLAN whenyou arrive at your workplace.Access point groupsTo create an access point group, select Access pointgroups > Options > New group. In the Group namefield, enter a name for the group. Define in the Conn.switching field whether to show the connectionswitching process on the display of your device. Chooseand edit the access points that belong to this group inthe Access points section.To remove an access point in an access point group,select the access point and Options > Remove.60Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 60 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 60 Jan 29, 2007 12:37:36 PM
Internet access pointsAn access point is where your device connects to anetwork. To use e-mail and multimedia services or toconnect to the Internet and browse web pages, youmust first define Internet access points for theseservices. You may need to set up several Internet accesspoints, depending on the sites you want to access. Forexample, browsing the Web may require one accesspoint, and accessing your company intranet mayrequire another. To connect to the Internet over GPRS,your device may have predefined, default Internetaccess point settings.When you switch on your device for the first time, theaccess points may be configured automatically basedon the service provider information in your SIM card.You can also receive the access points settings in amessage from your service provider. This might reducethe number of settings you need to enter yourself.The available options may vary. Some or all accesspoints may be preset for your device by your serviceprovider. You may not be able to add, edit, or deleteaccess points.Contact your service provider and e-mail serviceprovider for more information on access points andtheir settings.See "Connection settings," p. 90.Set up an Internet access point forpacket data (GPRS)When you switch the device on, it may recognize theSIM card provider and configure the correct textmessage, multimedia message, and GPRS settings andaccess points automatically.1. Select Menu > Tools > Settings > Connection >Access points.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.•Connection name — Enter a descriptive name forthe connection.•Data bearer — Select Packet data.•Access point name — Enter the name for theaccess point. The name is usually provided byyour service provider or network operator.•User name — Enter your user name if requiredby the service provider. User names are oftencase-sensitive and provided by your serviceprovider.•Prompt password — Select Yes to enter yourpassword each time you log into a server or Noto save the password in your device memory andautomate the login.•Password — Enter your password if required bythe service provider. The password is often case-sensitive provided by the service provider.61Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 61 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 61 Jan 29, 2007 12:37:36 PM
•Authentication — Select Secure to always sendyour password encrypted or Normal to send yourpassword encrypted when possible.•Homepage — Enter the Web address of the pageyou want to display as a home page when youuse this access point.4. After defining the settings, select Options >Advanced settings to define the advanced settingsor Back to save the settings and exit.For information on the advanced settings, see theextended user guide on the Web.Set up an Internet access point forwireless LANYou can use the WLAN wizard to create Internet accesspoints for wireless LAN, or define the access pointmanually. See "Wireless local area network(WLAN)," p. 64.Connection managerSelect Menu > Connect. > Conn. mgr..To view the status of data connections or endconnections, select Act. data conn..To search for wireless LANs available within range,select Availab. WLAN.View and end active connectionsNote:  The actual invoice for calls and servicesfrom your service provider may vary, depending onnetwork features, rounding off for billing, taxes, and soforth.In the active connections view, you can see the opendata connections: data calls, packet data connections,and wireless LAN connections.To view detailed information about networkconnections, select the connection from the list andOptions > Details. The type of information showndepends on the connection type.To end a network connection, select the connectionfrom the list and Options > Disconnect.To end all active network connections simultaneously,select Options > Disconnect all.To view the details of a network, press the scroll key.Search for wireless LANTo search for wireless LANs available within range,select Menu > Connect. > Conn. mgr. > Availab.WLAN. A list of found networks is displayed.The available wireless LAN view shows a list of wirelessLANs within range, their network mode (infrastructureor ad-hoc), signal strength indicator and networkencryption indicators, and if your device has an activeconnection with the network.To view the details of a network, press the scroll key.62Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 62 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 62 Jan 29, 2007 12:37:36 PM
To create an Internet access point in a network, selectOptions > Define access point.63Connectivityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 63 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 63 Jan 29, 2007 12:37:36 PM
Wireless local area network (WLAN)Some places, like France, have restrictions on the use ofwireless LAN. Check with your local authorities for moreinformation.This device can detect and connect to a wireless localarea network (WLAN). To use wireless LAN, a networkmust be available in the location and your device mustbe connected to it.See wireless LANavailabilityYour device can show you whether wireless LAN isavailable.To have your device show wireless LAN availability,select Menu > Tools > Settings > Connection >Wireless LAN > Show availability.If wireless LAN is available,   is shown on the display.Tip: You can also scan for networks in range.Wireless LAN connectionsImportant:  Always enable one of the availableencryption methods to increase the security of yourwireless LAN connection. Using encryption reduces therisk of unauthorized access to your data.To use wireless LAN, you must create an internet accesspoint (IAP) in a wireless LAN. Use the access point forapplications that need to connect to the internet. Awireless LAN connection is established when you createa data connection using a wireless LAN Internet accesspoint. The active wireless LAN connection is endedwhen you end the data connection. You can also endthe connection manually. See "Connectionmanager," p. 62.You can use wireless LAN during a voice call or whenpacket data is active. You can only be connected to onewireless LAN access point device at a time, but severalapplications can use the same internet access point.When the device is in the Offline profile, you can still usewireless LAN (if available). Remember to comply withany applicable safety requirements when establishingand using a wireless LAN connection.If you move the device to another location within thewireless LAN and out of range of a wireless LAN accesspoint, the roaming functionality can automaticallyconnect your device to another access point thatbelongs to the same network. As long as you remainwithin range of access points that belong to the samenetwork, your device can stay connected to thenetwork.Tip: To check the unique media access control(MAC) address that identifies your device, forexample to configure the MAC address of yourdevice to a WLAN router, enter *#62209526#64Wireless local area network (WLAN)file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 64 Jan 29, 2007 12:37:36 PM
on the device keypad. The MAC address isshown on the device display.Operating modesYour device enables different types of communicationin a wireless LAN. The two operating modes areinfrastructure and ad hoc.•The infrastructure operating mode allows two kindsof communication: wireless devices communicatewith each other through a wireless LAN access pointor wireless devices communicate with a wired LANdevice through a wireless LAN access point. Theadvantage of the infrastructure operating mode isthat you can have more control over networkconnections because they pass through an accesspoint. A wireless device can access the services thatare available in a regular wired LAN: companydatabase, e-mail, the Internet, and other networkresources, for example.•In the ad hoc operating mode you can send data toand receive it from other devices with compatiblewireless LAN support , for example, to be printed.These functions may require an additional thirdparty application to work. No wireless LAN accesspoint is required. Simply make the necessaryconfigurations and start communicating. Ad hocnetworking is easy to set up, but communication islimited to devices that are within range and supportcompatible wireless LAN technology.WLAN wizardThe WLAN wizard helps you to connect to a wirelessLAN.The WLAN wizard shows the status of your wireless LANconnections and network searches in the activestandby mode. To view the available options, scroll tothe row showing the status, and press the scroll key.Depending on the status, you can start the web browserusing a wireless LAN connection, disconnect from awireless LAN, search for wireless LANs, or set networkscanning on or off.If wireless LAN scanning is off and you are notconnected to any wireless LAN, WLAN scanning off isdisplayed in the active standby mode. To set scanningon and search for available wireless LANs, scroll to thestatus, and press the scroll key.To start a search for available wireless LANs, scroll to astatus, press the scroll key, and select Search forWLAN. To set wireless LAN scanning off, scroll to astatus, press the scroll key, and select Switch WLAN scanoff.When Start Web browsing is selected, the WLAN wizardautomatically creates an internet access point (IAP) forthe selected wireless LAN. The IAP can also be used withother applications requiring wireless LAN connection.If you select a secured wireless LAN network, you areasked to enter the relevant passcodes. To connect to ahidden network, you must enter the correct hiddenservice set identifier (SSID).You can also start the WLAN wizard separately to getmore information on wireless LANs within range. Select65Wireless local area network (WLAN)file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 65 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 65 Jan 29, 2007 12:37:36 PM
Menu > Connect. > WLAN wiz.. Found networks aredisplayed.Scroll to the desired network, select Options and fromthe following:•Start Web browsing or Cont. Web browsing — Startor continue browsing the web using the IAP of thewireless LAN.•Disconnect WLAN — Disconnect the activeconnection to the wireless LAN.•Refresh — Update the list of available wireless LANs.•Details — View the details of the wireless LAN.•Define access point — Create an internet accesspoint without starting the web browser.Always enable one of the available encryption methodsto increase the security of your wireless LAN connection.Using encryption reduces the risk of unauthorizedaccess to your data.Wireless LAN access pointsTo search for wireless LANs available within range,select Menu > Connect. > WLAN wiz.. To create aninternet access point in a wireless LAN, select Options >Define access point. To view the details of a networkshown in the list, select Options > Details.When an application asks you to select an access point,select the created access point. You can also create aninternet access point by selecting Search for WLAN, oruse Conn. mgr. to create internet access points. See"Connection manager," p. 62.Set up a wireless LAN accesspoint manuallyIf you cannot use the WLAN wizard, you can definewireless LAN access points manually.1. Select Menu > Tools > Settings > Connection >Access points.2. Select Options > New access point. To use anexisting access point as a basis for the new one,select Use existing settings. To start with an emptyaccess point, select Use default settings.3. Define the following settings.•Connection name — Enter a descriptive name forthe connection.•Data bearer — Select Wireless LAN.•WLAN netw. name — To enter the service setidentifier (SSID), that is, the name that identifiesthe specific wireless LAN, select Enter manually.To select the network from the wireless LANs inrange, select Search for netw..•Network status — Select Hidden if the networkyou are connecting to is hidden, or Public if it isnot hidden.•WLAN netw. mode — If you selectInfrastructure, devices can communicate witheach other and with wired LAN devices througha wireless LAN access point. If you select Ad-hoc,devices can send and receive data directly witheach other, and no wireless LAN access point isneeded.•WLAN security mode — You must select the samesecurity mode that is used in the wireless LAN66Wireless local area network (WLAN)file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 66 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 66 Jan 29, 2007 12:37:36 PM
access point. If you select WEP (wired equivalentprivacy), 802.1x, or WPA2 (Wi-Fi protectedaccess), you must also configure the relevantadditional settings. See the extended user guideon the Web or the device help for moreinformation.•WLAN security sett. — Edit the security settingsfor the selected WLAN security mode.•Homepage — Enter the Web address of the pageyou want to display as a home page when youuse this access point.The settings available for editing may vary.Wireless LAN settingsSee "Wireless LAN," p. 92.67Wireless local area network (WLAN)file:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 67 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 67 Jan 29, 2007 12:37:36 PM
WebSelect Menu > Web (network service).Web is one of the two browsers in your device. WithWeb, you can browse regular Web sites. These pagesuse the extensible hypertext markup language (XHTML)or hypertext markup language (HTML). If you want tobrowse WAP pages, use Menu > Media > Services. Bothof the browsers use their own bookmarks. The links inyour received messages open in the Services browser.Check the availability of services, pricing, and fees withyour network operator or service provider. Serviceproviders will also give you instructions on how to usetheir services.Access pointsTo browse the Web, you need to configure Internetaccess point settings. If you are using a data call or aGPRS connection, your wireless network must supportdata calls or GPRS, and the data service must beactivated for your SIM card. Your device might haveconfigured the Internet access point settingsautomatically based on your SIM card. If not, contactyour service provider for the correct settings.Tip: You may receive the Internet access pointsettings from your service provider as a specialtext message or from the network operator'sor service provider's Web pages.You can also enter the Internet access point settingsmanually. See "Internet access points," p. 61.Browse the WebTo browse the Web, select a bookmark, and press thescroll key. You can also enter the Web address, and pressthe scroll key. Use only services that you trust and thatoffer adequate security and protection against harmfulsoftware.Tip: When you start to enter the address,addresses of pages you have previously visitedthat match your input are displayed. To open apage, scroll to the address, and press the scrollkey.To open a Web link, scroll to it and press the scroll key.On a Web page, new links appear underlined in blue andpreviously visited links in purple. Images that act aslinks have a blue border around them.Addresses of the pages you visit are saved in the Auto.bookmarks folder.Keyboard shortcuts:•Press 1 to open your Bookmarks.•press 2 to find text.•Press 3 to return to the previous page.•Press 5 to switch between your open browserwindows.68Webfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 68 Jan 29, 2007 12:37:36 PM
•Press 8 to open page overview.•Press 9 to go to a different Web page.BookmarksYour device may have preinstalled bookmarks and linksfor third-party internet sites. You may also access otherthird-party sites through your device. Third-party sitesare not affiliated with Nokia, and Nokia does notendorse or assume liability for them. If you choose toaccess such sites, you should take precautions forsecurity or content.To view a bookmarked Web page, scroll to thebookmark, and press the scroll key.To browse other Web pages, select Options >Navigation options > Go to web address, enter thepage address, and select Go to.To delete a bookmark, scroll to it, and press thebackspace key.To add a bookmark, select Menu > Web > Options >Bookmark manager > Add bookmark. Scroll to Nameto enter a descriptive name for the bookmark,Address to enter the Web page address, Access point tochange the access point to connect to the Web page,and User name or Password to enter your user nameand password, if required by the service provider. Tosave the bookmark, select Back.Download itemsYou can download different items such as ringing tones,images, operator logos, themes, and video clips. Todownload an item, scroll to it, and press the scroll key.These items can be provided free, or you can purchasethem. Downloaded items are handled by the respectiveapplications in your device.When you start a download, a list of ongoing, paused,and completed downloads from the current browsingsession is displayed. To view the list, you can also selectOptions > Tools > Downloads. In the list, scroll to anitem, and select Options to pause, resume, or cancelongoing downloads; or open, save, or delete completeddownloads.To purchase items:1. To download the item, scroll to the link, and pressthe scroll key.2. Select the appropriate option to purchase the item.3. Carefully read all the information provided. Tocontinue the download, select Accept. To cancel thedownload, select Cancel.End a connectionTo end the connection and view the browser pageoffline, select Options > Advanced options >Disconnect; or to end the connection and close thebrowser, select Options > Exit.69Webfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 69 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 69 Jan 29, 2007 12:37:36 PM
Clear the cacheA cache is a memory location that is used to store datatemporarily. If you have tried to access or have accessedconfidential information requiring passwords, emptythe cache after each use. The information or servicesyou have accessed are stored in the cache.To clear the cache, select Options > Advancedoptions > Clear cache.News feeds and blogsSelect Menu > Web > Web feeds.Feeds are xml files in various Web pages that usuallycontain headlines and articles, often about recent newsor other topics. You can subscribe to interesting feedson Web pages. Select Options > Subscribe.Tip: Blog is a shortening of Weblog, which is acontinuously updated Web diary . Often theauthor's personality is an important factor inthe blog.To download a feed or blog, scroll to it, and press thescroll key.To add a feed or blog, select Options > Manage feed >New feed, and enter the information.To edit a feed or blog, scroll to a feed, select Options >Manage feed > Edit, and modify the information.Web settingsSelect Menu > Web > Options > Settings.Define the following settings:•Access point — Scroll to the access point to connectto Web pages, and press the scroll key.•Load imgs. & sounds — Select No to load pages fasterwhen browsing by not loading the images on them.•Default encoding — Select the correct characterencoding for your language.•Auto. bookmarks — Select On to save Web pageaddresses that you visit automatically in the Auto.bookmarks folder. To hide the folder, select Hidefolder.•Screen size — Select Full screen to use the wholedisplay area for viewing Web pages. You can pressthe left selection key to open Options and use theavailable options while browsing in full screenmode.•Homepage — Select the page that you want toappear as your homepage. Select Default to use theaccess point homepage, User defined to enter thehomepage address, or Use current page to use thecurrently open Web page.•Mini map — Select whether you want to see anoverview of the page as a miniature on top of thepage you are viewing.•History list — Select whether you want to seeminiatures of the pages you have visited when youwant to go back in your browsing history.•Cookies — Select to allow or reject the sending andreceiving of cookies. Cookies are info the networkserver collects about your visits to various Webpages. They are necessary if you shop on the Web70Webfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 70 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 70 Jan 29, 2007 12:37:36 PM
(for example, to retain the items you buy until youreach the cashier page). However, the informationmay be misused (for example, you may receiveunwanted advertisements in your device).•Java/ECMA script — Some Web pages may includeprogram commands that affect the appearance ofthe page or interaction between the page and itsbrowsers. To deny the use of such scripts, selectDisabled (for example, if you have troubledownloading).•Security warnings — Select Show or Hide to see orhide the security warnings you may receive duringbrowsing.•Block pop-ups — Select whether you want to allowpop-ups. Some pop-ups may be necessary (forexample, smaller windows where you write e-mailsin Web-based mail systems), but they may alsocontain unwanted advertising.ServicesSelect Menu > Media > Services (network service).Services is one of the two browsers in your device. WithServices, you can browse WAP pages that have beendesigned specially for mobile devices. For example,operators may have WAP pages for mobile devices. Tobrowse regular Web pages, use the other browser inMenu > Web.Check the availability of services, pricing, and fees withyour network operator or service provider. Serviceproviders will also give you instructions on how to usetheir services.Tip: To start a connection, press and hold 0 inthe standby mode.71Webfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 71 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 71 Jan 29, 2007 12:37:36 PM
Office applicationsOffice folder contains tools that help you organize andmanage the details of different events in your personaland business life.Some applications in the Office folder are not availablein all languages.Opening a large file may not be possible or it may takea while.File managerWith File mgr., you can manage the contents andproperties of files and folders. You can open, create,move, copy, rename, and search for files and folders.Copyright protection may prevent sending some files.QuickofficeTo use the Quickoffice applications, select Menu >Office > Quickoffice. A list of files in the .doc, .xsl, .ppt,and .txt file formats saved in your device memory or thememory card opens.To open a file in its respective application, press thescroll key.To edit a file, open the file, and press the scroll key.To sort files, select Options > Sort by.To open Quickword, Quicksheet, or Quickpoint, scroll tothe desired tab with the scroll key.Not all file formats or features are supported.For more information, see the device help.QuickwordWith Quickword, you can view and edit Microsoft Worddocuments on the display of your device. Quickwordsupports colors, bold, and underline.Quickword supports the viewing and editing ofdocuments saved in .doc format in Microsoft Word 97,2000, and XP. Not all variations or features of thementioned file formats are supported.To move in the document, use the scroll key.To search the document for text, select Options >Search options.You can also select Options and from the following:•Go to — Move to the start, end, or selected positionwithin the document.•Zoom — Zoom in or out.•Start auto-scroll — Start automatic scrolling throughthe document. To stop scrolling, select Options >Stop auto-scroll.To edit the document, press the scroll key. Select Edit,and from the available options. You can, for example,72Office applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 72 Jan 29, 2007 12:37:36 PM
align text, change the font and font color, and addbullets and indentations.QuicksheetWith Quicksheet, you can read and edit Microsoft Excelfiles on the display of your device.Quicksheet supports the viewing and editing ofspreadsheet files saved in .xls format in Microsoft Excel97, 2000, and XP. Not all variations or features of thementioned file formats are supported.To move around in the spreadsheet, use the scroll key.To switch between worksheets, select Options >Worksheet.To search the spreadsheet for a text, value, or formula,select Options > Search.To change how the spreadsheet is displayed, selectOptions and from the following:•Pan — Navigate within the current worksheet byblocks. A block contains columns and rows displayedby a screen. To display the columns and rows, scrollto a block and select OK.•Resize — Adjust the size of columns or rows.•Zoom — Zoom in or out•Freeze panes — Keep the selected row, column, orboth visible while you move in the spreadsheet.To edit the spreadsheet, press the scroll key. SelectEdit, and from the available options. You can, forexample, format text and cells, insert mathematicaloperators and spreadsheet functions, and change thebackground color.QuickpointWith Quickpoint, you can view and edit MicrosoftPowerPoint presentations on the display of your device.Quickpoint supports the viewing and editing ofpresentations created in .ppt format in MicrosoftPowerPoint 2000 and XP. Not all variations or featuresof the mentioned file formats are supported.To move between the slide, outline, and the notes view,scroll to the desired tab with the scroll key.To move to the next or previous slide in thepresentation, scroll up or down with the scroll key.To view the presentation in full screen, select Options >Full screen.To expand items in the presentation in the outline view,select Options > Expand.To edit the presentation, press the scroll key. SelectEdit, and from the available options. You can, forexample, align text, change the font and font color, andadd bullets and indentations.PrintYou can print a message or file from the device, previewa print job, define page layout options, select a printer,or print to a file. You may not be able to print allmessages, such as multimedia messages or otherspecial messages.To configure a printer for your device, select Menu >Office > Printers > Options > Add. To set the printeras the default printer, select Options > Set as default.73Office applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 73 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 73 Jan 29, 2007 12:37:36 PM
Before you print, make sure that your device is properlyconnected to the printer.To print a message or a file, select Options > Print.To print to a file, select Options > Printing options >Print to file, and determine the location for the file.To change the printing options, select Options >Printing options. You can select the printer you want touse, the number of copies and the range of pages youwant to print.To change the page layout before printing, selectOptions > Printing options > Page setup. You canchange the paper size and orientation, define themargins, and insert a header or a footer. The maximumlength of the header and footer is 128 characters.To preview a file or message before you print, selectOptions > Printing options > Preview.NotesSelect Menu > Office > Notes.You can create and send notes to other compatibledevices, and save plain text files (.txt format) that youreceive to Notes.To write a new note, select Options > New note, writethe text and press Done.CalculatorNote:  This calculator has limited accuracy and isdesigned for simple calculations.Select Menu > Office > Calculator.To make a calculation, enter the first number of thecalculation. Scroll to and select a function such as addor subtract from the function map. Enter the secondnumber of the calculation, and select =. Use thekeyboard to enter decimal points.The calculator performs operations in the order they areentered. The result of the calculation remains in theeditor field and can be used as the first number of a newcalculation.To save the results of a calculation, select Options >Memory > Save. The saved result replaces thepreviously stored number in memory.To retrieve the results of a calculation from memory anduse them in a calculation, select Options > Memory >Recall.To view the last saved result, select Options > Lastresult.Exiting the calculator application or turning off thedevice does not clear the memory. You can recall thelast saved result the next time you open the calculatorapplication.ConverterSelect Menu > Office > Converter.74Office applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 74 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 74 Jan 29, 2007 12:37:36 PM
The converter has limited accuracy, and rounding errorsmay occur.Convert measurements1. Scroll to the Type field, and select Options >Conversion type to open a list of measures. Scroll tothe measure you want to use, and select OK.2. Scroll to the first Unit field, and select Options >Change currency. Select the unit from which youwant to convert, and select OK. Scroll to the nextUnit field, and select the unit to which you want toconvert.3. Scroll to the first Amount field, and enter the valueyou want to convert. The other Amount fieldchanges automatically to show the converted value.Set base currency and exchangerateNote:  When you change base currency, you mustenter new exchange rates because all previously setexchange rates are cleared.Before you can make currency conversions, you mustchoose a base currency and add exchange rates. Therate of the base currency is always 1. The base currencydetermines the conversion rates of the othercurrencies.1. To set the rate of exchange for the unit of currency,scroll to the Type field, and select Options >Currency rates.2. A list of currencies opens, and you can see thecurrent base currency at the top. Scroll to thecurrency type and enter the exchange rate youwould like to set per single unit of currency.3. To change the base currency, scroll to the currency,and select Options > Set as base curr..4. Select Done > Yes to save the changes.After you have inserted all the necessary exchangerates, you can make currency conversions.Screen exportYou can show the screen of the device to an audiencewith a compatible data projector, or other compatibleprojection system. The screen content is transferred tothe data projector using, for example, a Bluetoothconnection.Select Menu > Office > Screen export.To be able to show screen content with a compatibledata projector, you must install the drivers of the dataprojector. For more information, check with the dataprojector manufacturer or its representative.Not all applications support this feature. You can startthe external viewer in two ways: from the Office folderor inside an application that supports it.Show screen contentTo show screen content with a data projector, open thescreen export application, and select Options > Selectdevice. In the list of available devices, scroll to the device75Office applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 75 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 75 Jan 29, 2007 12:37:36 PM
you want to use, and select OK. Select Options >Enable to show screen content.To hide the screen content, select Options > Hide. Thescreen exporter application is moved to thebackground.To stop showing screen content, select Options >Disable.76Office applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 76 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 76 Jan 29, 2007 12:37:36 PM
Data and software managementApplication managerImportant:  Only install and use applications andother software from trusted sources, such asapplications that are Symbian Signed or have passedthe Java Verified™ testing.Select Menu > Installat. > App. mgr..When you open the application manager, you see allthe software packages that have been installed, withtheir name, version number, type, and size. You canview the details of installed applications, remove themfrom your device, and specify installation settings.Remote configurationnetwork serviceSelect Menu > Connect. > Dev. mgr..You can connect to a server and receive configurationsettings for your device. You may receive server profilesand different configuration settings from your networkoperator, service providers, and company informationmanagement department. Configuration settings mayinclude connection and other settings used by differentapplications in your device. Available options may vary.The remote configuration connection is usually startedby the server when the device settings need to beupdated.Remote configuration settingsIn the Dev. mgr. main view, select Options and selectfrom the following:•Start configuration — Connect to the server andreceive configuration settings for your device.•New server profile — Create a new server profile.•Edit profile — Change the profile settings.•Delete — Remove the selected profile.•Enable config. — Select to receive configurationsettings from those servers for which you have aserver profile and have allowed configuration.•Disable config. — Select to stop receivingconfiguration settings from all servers for which youhave a server profile.•View log — View the configuration log of theselected profile.Data synchronizationMenu > Connect. > Sync.Use Sync to synchronize (network service) yourcontacts, calendar, or notes with correspondingapplications on a compatible computer or remoteInternet server. Your synchronization settings are savedin a synchronization profile. The application usesSyncML technology for remote synchronization. Forinformation on SyncML compatibility, contact the77Data and software managementfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 77 Jan 29, 2007 12:37:36 PM
supplier of the applications with which you want tosynchronize your device.The available applications you can synchronize mayvary. Contact your service provider for moreinformation.Tip:  You may receive the synchronizationsettings as a message from your serviceprovider.Create a synchronization profileTo create a profile, select Options > New sync profileand select from the following options:•Sync profile name  — Enter a name for the profile.•Applications — Select the applications tosynchronize with the profile.•Connection settings — Specify the neededconnection settings. Contact your service providerfor information.Download!Select Menu > Download!.Download! (network service) is a mobile content shopavailable on your device. You can browse, download,and install items, such as latest applications and relateddocuments, to your device from the web.The items are categorized under catalogs and foldersprovided by Nokia or independent service providers.Some items may be chargeable, but you can usuallypreview them free of charge.Only install and use applications and other softwarefrom sources that offer adequate security andprotection against harmful software.If Download! is not available from your wireless serviceprovider, it may not appear in the menu of your device.For more information on the availability of Download!,contact your network operator, service provider, ordealer.Settings WizardSelect Menu > Tools > Sett. wizard.Settings Wizard configures your device for operator(MMS, GPRS, and Internet) and e-mail settings based onyour network operator information.To use these services, you may have to contact yournetwork operator or service provider to activate a dataconnection or other services.If Settings Wizard is not available from your wirelessservice provider, it may not appear in the menu of yourdevice. For more information on the availability ofSettings Wizard, contact your network operator, serviceprovider, or dealer.The availability of different settings items in SettingsWizard depends on the features of the device, SIM card,wireless service provider, and the availability of thedata in the Settings Wizard database.When you use the wizard for the first time you areguided through settings configuration. To start thewizard, select Start.78Data and software managementfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 78 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 78 Jan 29, 2007 12:37:36 PM
If there is no SIM card inserted, you will be asked toselect the home country of your wireless serviceprovider, and your service provider. If the country orservice provider suggested by the wizard is not thecorrect one, select the correct one from the list.To access the main view of the Settings Wizard after thewizard has finished the settings configuration, selectOK.If the settings configuration is interrupted, the settingswill not be defined. After closing the wizard, you canstart to use the configured applications.If you are not able to use Sett. wizard, visit the Nokiaphone settings Web site at www.nokia.com.For additional information, refer to the reference leafletincluded with your Nokia device.79Data and software managementfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 79 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 79 Jan 29, 2007 12:37:36 PM
CameraYou can take photos or record video clips with the built-in camera. The camera lens is on the back of the device,and the display works as a viewfinder. The cameraproduces pictures in .jpeg format and video clips in .3gpp format.Take a picture1. Select Menu > Media > Camera.Your device supports an image capture resolutionof up to 1600 x 1200 pixels.2. Use the display as a viewfinder, aim at your subject,and press the scroll key. The device saves the photoin the default folder, or in the folder you havedefined.Tip:  To zoom in or out before taking apicture, scroll up or down.3. If you do not want to keep the saved photo, selectOptions > Delete. Select Back to return to theviewfinder to take another picture. Select Options >Go to Gallery to view the photo in Gallery.If the light is dim, select Options > Night mode afteryou have opened Camera but before taking a picture.To adjust the image, select Options > Adjust > Whitebalance or Color tone.To take pictures in a sequence, select Options >Sequence mode. The camera takes six pictures in a row.To take timed pictures, select Options > Self-timer,select the desired timeout, and press Activate. Thecamera takes a picture after the timeout has passed.Tip: You can view photos in Menu > Media >Gallery > Images.Record a video clipSelect Camera, and scroll right to activate the videorecorder. To start recording a video clip, press the scrollkey. The remaining recording time is shown on the topof the display. To pause the recording, select Pause; toresume the recording, select Continue. To stop therecording, select Stop. The device saves the clip in thedefault folder, or in the folder you have defined. If youdo not want to keep the saved video clip, selectOptions > Delete. Select Back to return to theviewfinder to record another video clip. SelectOptions > Play to view the video clip in theRealPlayer application.80Camerafile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 80 Jan 29, 2007 12:37:36 PM
Insert pictures intomessagesWhen you are creating a new multimedia message, youcan open the camera to insert a new picture into themessage.To insert a picture into a multimedia message, selectOptions > Insert new > Image. The viewfinder showsyou the image to be captured. To take a picture, pressthe scroll key. To insert the picture in the message, pressthe scroll key.Insert videos into messagesWhen you are creating a new multimedia message, youcan open the camera to insert a new video into themessage.To insert a video into a multimedia message, selectOptions > Insert new > Video clip. Press the scroll keyto start recording. To insert the video in the message,select Options > Select.SettingsTo edit the image settings, select Menu > Media >Camera > Options > Settings > Image, and define thefollowing:•Image quality — Define how much the picture iscompressed when being saved. High provides thebest image quality, but takes more memory.Normal is the default quality setting. Basic takes theleast amount of memory.•Show captured img. — Select whether you want thecaptured image to be displayed after the capture.•Image resolution — Select the resolution of theimages you capture.•Default image name — Select Date or Text for thedefault title assigned to a picture. Date assigns thedate of the capture as the title. Text assigns the termyou define and a number to the picture.•Memory in use — Select the memory to use forstoring images: Phone memory or Memory card.To edit the video settings, select Options > Settings >Video, and define the following:•Length — Select the length of the video clips thatyou record. The maximum length of a video clipdepends on the available memory.•Video resolution — Select the resolution to useduring video recording. The default setting for theresolution is always the lowest setting.•Default video name — Select Date or Text for thedefault title assigned to a recorded video. Dateassigns the date of the recording as the title. Textassigns the term you define and a number to therecorded video.•Memory in use — Select the memory to use forstoring recorded videos: Phone memory or Memorycard.81Camerafile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 81 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 81 Jan 29, 2007 12:37:36 PM
Media applicationsSelect Menu > Media.Media contains different media applications that allowyou to save and view images, record sounds, and playsound clips.GallerySelect Menu > Media > Gallery.Use Gallery to access and use different types of media,including images, videos, music, and sounds. All viewedimages and videos and all received music and soundsare automatically saved to Gallery. You can browse,open, and create folders; and mark, copy, and moveitems to folders. Sound clips are opened in the MusicPlayer, and video clips and streaming links in theRealPlayer application.To open a file or a folder, press the scroll key. Imagesare opened in the image viewer.To download files into the Gallery in one of the mainfolders using the browser, select Graphic downl., Videodownl., Track downl., or Sound downl.. The browseropens, and you can choose a bookmark or enter theaddress for the site to download from.To search for a file, select Options > Find. Start to entera search string (for example, the name or date of thefile you are searching for). Files that match the searchare shown.ImagesSelect Menu > Media > Gallery > Images.Images consists of two views:•In the image browser view you can send, organize,delete, and rename images stored in your device ormemory card.•In the image viewer, which opens when you selectan image in the image browser view, you can view,and send individual images. You can set images aswallpaper for your display.The following file formats are supported: JPEG, BMP,PNG, and GIF 87a/89a. The device does not necessarilysupport all variations of the file formats.To open an image for viewing, select an image in theimage browser view, and select Options > Open. Theimage opens in the image viewer.To open the next or previous image for viewing, scrollright or left in the image viewer.To enlarge the viewed image on the display, selectOptions > Zoom in, or press 5 or 7. To reduce theviewed image on the display, select Zoom out or press0.To view the image in full screen size, select Options >Full screen or press 7 twice. To return to normal view,select Options > Normal screen.82Media applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 82 Jan 29, 2007 12:37:36 PM
To rotate an image, select an image, and Options >Rotate. Select Right to rotate the image clockwise by 90degrees, or select Left to rotate the imagecounterclockwise by 90 degrees.Manage image filesTo view detailed information about an image, select animage and Options > View details. Size and format ofthe file, the time and date the file was last modified andthe resolution of the image in pixels are displayed.To send an image, select the image, Options > Send,and the method for sending.To rename an image, select an image and Options >Rename. Enter a new name, and select OK.To set an image as wallpaper, select the image andOptions > Set as wallpaper.To add an image to a contact card, select an image andOptions > Add to contact. The contacts view opens, andyou can select the contact for the image.RealPlayerSelect Menu > Media > RealPlayer.RealPlayer can play video clips and audio files that arestored in the device memory or on a memory card,transferred to your device from e-mail or compatiblePC, or streamed to your device over the Web.Formats supported by RealPlayer include MPEG-4, MP4(not streaming), 3GP, RV, RA, AAC, AMR, and Midi.RealPlayer does not necessarily support all variations ofa media file format.Tip: Streaming audio and video files meansplaying them directly from the Web withoutdownloading them first to your device.Play video clips and stream linksWarning:  Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To select audio and video files to play with RealPlayer,select Options > Open, and scroll to a media clip in yourdevice or on a memory card.To play streaming media, select a Web link that pointsto a media clip, and select Play; or connect to the Web,browse to a video clip or audio file, and select Play.RealPlayer recognizes two kinds of links: an rtsp:// URLand an http:// URL that points to a RAM file. Before thecontent begins streaming, your device must connect toa Web site and buffer the content. If a networkconnection problem causes a playback error,RealPlayer attempts automatically to reconnect to theInternet access point.To save a media clip, select Options > Save, scroll to afolder in device memory or on a memory card, andselect Save. To save a link to a media file on the Web,select Save link.To fast-forward or rewind the clip during playback,scroll up or down.To increase or decrease the volume during playback,press the volume keys.83Media applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 83 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 83 Jan 29, 2007 12:37:36 PM
SettingsSelect Menu > Media > RealPlayer > Options >Settings.Video settingsSelect Loop > On, if you want to replay video clipsautomatically after they finish playing.Connection settingsSelect Connection, scroll to the following settings, andpress the scroll key to edit:•Proxy — Select whether to use a proxy server and tokey in the proxy server's IP address and port number.•Network — Change the access point to connect tothe Internet and to set the port range used whenconnecting.Proxy settingsProxy servers are intermediate servers between mediaservers and their users. Some service providers usethem for additional security or to speed up access toWeb pages that contain media files.Contact your service provider for the correct settings.Select Connection > Proxy, scroll to the followingsettings, and press the scroll key to edit:•Use proxy — Select Yes to use a proxy server.•Proxy serv. address — Enter the IP address of theproxy server. This setting is only available if youselect to use a proxy server.•Proxy port number — Enter the port number of theproxy server. This setting is only available if youselect to use a proxy server.Network settingsContact your service provider for the correct settings.Select Connection > Network, scroll to the followingsettings, and press the scroll key to edit:•Default access point — Scroll to the access point toconnect to the Internet, and press the scroll key.•Online time — Set the time when RealPlayerdisconnects from the network when you pause amedia clip that plays using a network link. SelectUser defined, and press the scroll key. Enter the time,and select OK.•Lowest UDP port — Enter the lowest port number ofthe server port range. The minimum value is 1024.•Highest UDP port — Enter the highest port numberof the server port range. The maximum value is65535.Music playerWarning:  Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.Select Menu > Media > Music player.With the music player, you can play music files andcreate and listen to track lists. The music playersupports files with extensions such as MP3 and AAC.84Media applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 84 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 84 Jan 29, 2007 12:37:36 PM
Listen to musicWarning:  Listen to music at a moderate level.Continuous exposure to high volume may damage yourhearing.To select a music track, select Options > Music library.All tracks lists all music on your device. To view sortedsongs, select Albums, Artists, Genres, or Composers. Toplay a track, scroll to the track, and select Options >Play. When a track is playing, to change between playand pause, press   and  . To stop a track, press  .After you add or remove music files in the device,update your Music library. Select Options > UpdateMusic library. The player searches the device memoryfor music files and updates them to the Music library.To select the previous or next track, scroll the scroll keyup or down.To play the music tracks repeatedly, select Options >Loop. Select All to repeat all the tracks in the currentfolder, One to repeat the selected track, or Off to set offthe repeating.To play music in random order, select a folder andOptions > Random play.To view music track information, scroll to the desiredtrack and select Options > View details.Keyboard shortcuts:•Press 5 to pause a track.•press 4 to return to the beginning of the track. Presswithin two seconds after a song has started to go tothe previous track. Press and hold to rewind.•Press 6 to go to the next track. Press and hold to fastforward.•Press 8 to stop a track.Adjust music volumeTo control the music volume, press the volume keys. Tomute the volume, press the lower volume key until thevolume is muted.Track listsYou can create a new track list and add tracks to it, orselect a saved track list.To create a new track list, select Options > Musiclibrary > Track lists > Options > New track list. Writethe name of the new track list, and select OK.To add a track to a track list, open the track list, andselect Options > Add tracks.EqualizerSelect Menu > Media > Music player > Options >Equalizer.You can personalize the sound of your music files withEqualizer. You can use preset frequency settings basedon styles of music, like classical or rock. You can alsocreate customized settings based on your own listeningpreferences.You cannot use other functions of Music player whileEqualizer is open.85Media applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 85 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 85 Jan 29, 2007 12:37:36 PM
With Equalizer, you can enhance or diminishfrequencies during music playback and modify howyour music sounds. There are preset frequency settingsin your device, for example Rock.To use a preset frequency setting when playing music,scroll to the frequency setting you want to use, andselect Options > Activate.Create your own frequency setting1. To create your own frequency setting, selectOptions > New preset.2. Enter a name for the preset frequency setting, andselect OK.3. Scroll up or down to move between the frequencybands and set the frequency on each band. To movebetween bands, scroll left or right.4. Select Back to save the new frequency setting orselect Options > Reset to defaults to set the bandsat a neutral frequency and start over.RecorderSelect Menu > Media > Recorder.With Recorder, you can record up to 60 seconds of avoice memo, save the voice recording as a sound clip,and play the sound clip. Recorder supports the AMRformat.Press the voice key to activate Recorder. If push to talkis available in your network, and you have logged in tothe service, the voice key works as a push to talk keyand does not activate Recorder.To record a voice memo, select Options > Record soundclip. Select Pause to pause the recording and Record toresume recording. When you finish recording, selectStop. The sound clip is automatically saved.The maximum length of a voice recording is 60 seconds,but it also depends on the storage space available indevice memory or on a memory card.Play a voice recordingTo listen to a voice recording that you just recorded,select the play icon ( ). Select Stop to cancel playback.The progress bar displays the playing time, position,and length of a voice recording.To pause playback of a voice recording, select Pause.Playback resumes when you select Play.Voice recordings that you receive or record aretemporary files. You must save the files that you wantto keep.Flash playerSelect Menu > Media > Flash Player.With Flash Player, you can view, play, and interact withflash files made for mobile devices.To open a folder or play a flash file, scroll to the folderor file, and press the scroll key.86Media applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 86 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 86 Jan 29, 2007 12:37:36 PM
To send a flash file to compatible devices, scroll to it,and press the call key. Copyright protection may preventthe sending of some flash files.To switch between flash files saved on your devicememory or memory card, scroll left or right.The available options may vary.87Media applicationsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 87 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 87 Jan 29, 2007 12:37:36 PM
SettingsSelect Menu > Tools > Settings.You can define and modify various settings of yourdevice. Modifying these settings affects the operationof your device across several applications.Some settings may be preset for the device or sent toyou in a configuration message by your networkoperator or service provider. You may not be able tochange such settings.Scroll to the setting that you want to edit, and press thescroll key to do the following:•Switch between two values, such as on or off.•Select a value from a list.•Open a text editor to enter a value.•Open a slider to decrease or increase the value byscrolling left or right.Phone settingsSelect Phone to change the language settings, standbymode settings, and display settings of your device.General settingsSelect General and from the following:•Phone language — Select a language from the list.Changing the device language affects everyapplication in your device. When you change thelanguage, the device restarts.•Writing language — Select a language from the list.Changing the writing language also affects thecharacters that are available when writing text.•Welcome note / logo — Select Default to use thedefault image, Text to enter a welcome note of yourown, or Image to select an image from the Gallery.The welcome note or image is displayed briefly eachtime you switch on the device.•Orig. phone settings — Restore the original devicesettings. To do this, you need your device lock code.After resetting, the device may take a longer time topower on. Documents, contact information,calendar entries, and files are unaffected.Standby mode settingsSelect Standby mode and from the following:•Active standby — Select On to have shortcuts todifferent applications available in the active standbymode.•Left selection key, Right selection key — Change theshortcuts that open from the left and right selectionkeys in the standby screen. Press scroll key, select afunction from the list, and OK.•Navigation key right, Navigation key left, Navigat.key down, Navigation key up, Selectionkey — Change the shortcuts that open when you88Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 88 Jan 29, 2007 12:37:36 PM
scroll to different directions. These settings are notavailable if you select Active standby > On.•Active standby apps. — Select the applications thatyou want to access from the active standby.•Active standby mailbox — Select the inbox or themailbox that is shown in the active standby.•Active standby plug-ins — Select the plug-ins thatare shown in the active standby. You can, forexample, see how many voice mails you have. Evenif you switch off the active standby notifications formissed calls and messages, the default notificationwill still show them. The available plug-ins may vary.Display settingsSelect Display and from the following:•Light sensor — Adjust the amount of light used toilluminate the device display.•Power saver time-out — Select the amount of timebefore the screen saver is activated. Activating thescreen saver lengthens the device operating time.•Light time-out — Set how quickly after last keypressthe display dims.Call settingsSelect Call and from the following:•Send my caller ID — Select Yes to display your phonenumber to the person you are calling or Set bynetwork to let the network to determine whetheryour caller ID is sent.•Send my net call ID — Set this feature on if you wantto display your net caller ID to the person you arecalling.•Call waiting — Select Activate to be notified of a newincoming call while you have a call in progress orCheck status to check if the function is active on thenetwork.•Internet call waiting — Activate this feature to benotified of a new incoming call while you have a netcall in progress.•Internet call alert — Set this on if you want the deviceto respond to the caller that it is busy. If you set thisoff, the device emits a busy tone to the caller and youreceive a notification about the missed call.•Default call type — Select Cellular to make normalcalls to the phone number or Internet to use VoIP tocall the number or address.•Reject call with SMS — Select Yes to send a textmessage to the person who is calling you informingwhy you cannot answer their incoming call.•Message text — Enter the text that is sent when youcannot answer an incoming call and want toautomatically send a text message as a reply.•Image in video call — Select Use selected to select astill image to be displayed instead of a video duringa video call or None to not send any image during avideo call. This option is available only if your deviceis equipped to work within UMTS networks and youhave UMTS network coverage. See "UMTS(3G)," p. 54.•Automatic redial — Select On to redial a number if itwas busy at the first call attempt. Your device makesa maximum of 10 attempts to connect the call.•Summary after call — Select On to briefly display theapproximate duration of the last call.89Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 89 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 89 Jan 29, 2007 12:37:36 PM
•1-touch dialing — Select On to activate speed dialingon your device. To dial a phone number assigned tothe speed dialing keys (2-9), press and hold the key.See "1-touch dial," p. 35.•Anykey answer — Select On to answer an incomingcall by briefly pressing any key, except the end key.•Line in use — Select Line 1 or Line 2 to change thephone line for outgoing calls and text messages(network service). This setting is displayed only if theSIM card supports the alternate line service and asubscription to two phone lines.•Line change — Select Disable to prevent lineselection (network service). To change this setting,you need the PIN2 code.•Internet call alert — Select Off to notify incoming netcalls that your device is busy or On to acceptincoming net calls.Connection settingsSelect Menu > Tools > Settings > Connection andfrom the following:•Access points — Set up new or edit existing accesspoints. Some or all access points may be preset foryour device by your service provider, and you maynot be able to create, edit, or remove them.•Access point groups — Set up new or edit existingaccess point groups that are used in automaticconnection establishment and e-mail roaming.•Packet data — Determine when packet dataconnections are used, and enter the access point ifyou use your device as a modem for a computer.•Internet tel. settings — Define settings for net calls.•SIP settings — View or create session initiationprotocol (SIP) profiles.•Data call — Set the time-out period after which datacall connections automatically end.•VPN — Install and manage VPN policies, manage VPNpolicy servers, see the VPN log, and create andmanage VPN access points.•Wireless LAN — Determine if the device displays anindicator when a wireless LAN is available, and howoften the device searches for networks.•Configurations — View and delete trusted serversfrom which your device may receive configurationsettings.To obtain information about wireless LAN orsubscribing to a packet data service and theappropriate connection and configuration settings,contact your network operator or service provider.The settings available for editing may vary.Access pointsSelect Menu > Tools > Settings > Connection >Access points.An access point is where your device connects to thenetwork by way of a data connection. To use e-mail andmultimedia services or to browse web pages, you mustfirst define access points for these services.An access point group is used for grouping andprioritizing access points. An application can use agroup as a connection method instead of a single accesspoint. In that case, the best available access point insidea group is used for making the connection, and in caseof e-mail, also for roaming.90Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 90 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 90 Jan 29, 2007 12:37:36 PM
Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.See "Internet access points," p. 61.Access point groupsSelect Menu > Tools > Settings > Connection >Access point groups.An access point group is used for grouping andprioritizing access points. An application can use agroup as a connection method instead of a single accesspoint. In that case the best available access point insidea group is used for making connection and in case of e-mail, also for roaming. See "Access pointgroups," p. 60.Packet dataSelect Menu > Tools > Settings > Connection >Packet data.Your device supports packet data connections, such asGPRS in the GSM network. When you are using yourdevice in GSM and UMTS networks, if your device isequipped to work within UMTS networks, it is possibleto have multiple data connections active at the sametime; access points can share a data connection, anddata connections remain active (for example, duringvoice calls). See "Connection manager," p. 62.Packet data settingsThe packet data settings affect all access points using apacket data connection.Select from the following:•Packet data conn. — Select When available toregister the device to the packet data network whenyou switch the device on in a supported network.Select When needed to establish a packet dataconnection only when an application or actionrequires it.•Access point — Enter the access point nameprovided by your service provider to use the deviceas a packet data modem to your computer.These settings affect all access points for packet dataconnections.Net call settingsSelect Menu > Tools > Settings > Connection >Internet tel. settings. Select Options > New profile orOptions > Edit.Scroll to Name, press the scroll key, enter a name for theprofile, and select OK.Scroll to SIP profiles, press the scroll key, select a profileand OK. SIP protocols are used for creating, modifying,and terminating communications sessions such as netcalls with one or more participants. SIP profiles includesettings for these sessions.To save your settings, press Back.Data call settingsSelect Menu > Tools > Settings > Connection > Datacall.91Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 91 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 91 Jan 29, 2007 12:37:36 PM
To set the time-out period after which data callsautomatically end if no data has been transferred,select Online time, and press the scroll key. Select Userdefined to enter the time yourself or Unlimited to keepthe connection active until you select Options >Disconnect.VPNVPN access pointsTo manage VPN access points, select VPN > VPN accesspoints > Options, and from the following:•Edit — Edit the selected access point. If the accesspoint is in use or its settings are protected, youcannot edit it.•New access point — Create a new VPN access point.•Delete — Delete the selected access point.VPN access point settingsContact your service provider for the correct accesspoint settings.To edit VPN access point settings, select the access pointand Options.Select from the following:•Connection name — Enter a name for the VPNconnection. The maximum length of the name is 30characters.•VPN policy — Select a VPN policy to be used with thisaccess point.•Internet access pt. — Select the Internet access pointto be used with this VPN access point.•Proxy serv. address — Enter the proxy server addressof this VPN access point.•Proxy port number — Enter the number of the proxyport.Wireless LANSelect Menu > Tools > Settings > Connection >Wireless LAN.To have an indicator displayed when there is a wirelessLAN available in your current location, select Showavailability > Yes.To select the time interval for your device to scan foravailable wireless LANs and update the indicator, selectScan for networks.Advanced WLAN settingsSelect Menu > Tools > Settings > Connection >Wireless LAN > Options > Advanced settings. Thewireless LAN advanced settings are normally definedautomatically, and changing them is notrecommended.To edit the settings manually, select Automaticconfig. > Disabled, and define the following:•Long retry limit — Enter the maximum number oftransmission attempts if the device does not receivea receiving acknowledgement signal from thenetwork.•Short retry limit — Enter the maximum number oftransmission attempts if the device does not receivea clear-to-send signal from the network.92Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 92 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 92 Jan 29, 2007 12:37:36 PM
•RTS threshold — Select the data packet size at whichthe wireless LAN access point device issues a requestto send before sending the packet.•TX power level — Select the power level of yourdevice when sending data.•Radio measurements — Enable or disable the radiomeasurements.•Power saving — Enable or disable conservation ofbattery power.To restore all settings to their original values, selectOptions > Restore defaults.Security settings for wireless LAN accesspointsSelect Menu > Tools > Settings > Connection >Access points. Select Options > New access point andstart to create a wireless LAN access point, or select awireless LAN access point and Options > Edit.WEP security settingsIn the access point settings, select WLAN securitymode > WEP.Wired equivalent privacy (WEP) encryption methodencrypts data before it is transmitted. Access to thenetwork is denied to users who do not have therequired WEP keys. When WEP security mode is in use,if your device receives a data packet not encrypted withthe WEP keys, the data is discarded.In an Ad-hoc network, all devices must use the sameWEP key.Select WLAN security sett. and from the following:•WEP key in use — Select the desired WEP key.•Authentication type — Select Open or Shared.•WEP key settings — Edit the settings for the WEP key.802.1x security settingsIn the access point settings, select WLAN securitymode > 802.1x.802.1x authenticates and authorizes devices to accessa wireless network, and prevents access if theauthorization process fails.Select WLAN security sett.. and from the following:•WPA mode — Select EAP (Extensible AuthenticationProtocol) or Pre-shared key (a secret key used fordevice identification).•EAP plug-in settings — If you selected WPA mode >EAP, select which EAP plug-ins defined in your deviceto use with the access point.•Pre-shared key — If you selected WPA mode > Pre-shared key, enter the shared private key thatidentifies your device to the wireless LAN to whichyou connect.The settings available for editing may vary.WPA security settingsIn the access point settings, select WLAN securitymode > WPA/WPA2.Select WLAN security sett.. and from the following:•WPA mode — Select EAP (Extensible AuthenticationProtocol) or Pre-shared key (a secret key used fordevice identification).•EAP plug-in settings — If you select WPA mode >EAP, select which EAP plug-ins defined in your deviceto use with the access point.93Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 93 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 93 Jan 29, 2007 12:37:36 PM
•Pre-shared key — If you select WPA mode > Pre-shared key, enter the shared private key thatidentifies your device to the wireless LAN to whichyou connect.The settings available for editing may vary.EAPTo view the EAP (extensible authentication protocol)plug-ins currently installed in your device (networkservice), select Menu > Tools > Settings >Connection > Access points. Select Options > Newaccess point and define an access point that useswireless LAN as a data bearer and 802.1x or WPA/WPA2 as the security mode. Select WLAN securitysett. > WPA mode > EAP, scroll to EAP plug-insettings, and press the scroll key.The extensible authentication protocol (EAP) plug-insare used in wireless networks to authenticate wirelessdevices and authentication servers, and the differentEAP plug-ins make possible the use of various EAPmethods (network service).To use an EAP plug-in when you connect to a WLANusing the access point, select the desired plug-in andOptions > Enable. The EAP plug-ins enabled for usewith this access point have a check mark next to them.To not use a plug-in, select Options > Disable.To edit the EAP plug-in settings, select Options >Configure.To change the priority of the EAP plug-in settings, selectOptions > Raise priority to attempt to use the plug-inbefore other plug-ins when connecting to the networkwith the access point, or Options > Lower priority touse this plug-in for network authentication afterattempting to use other plug-ins.The available options may vary.See the device help for more information on EAPplugins.ConfigurationsTo view and delete configurations for trusted servers,select Menu > Tools > Settings > Connection >Configurations.You can receive messages from your network operator,service provider, or company information managementthat contain configuration settings for trusted servers.These settings are automatically saved inConfigurations. You may receive configuration settingsfor access points, multimedia or e-mail services, and IMor synchronization settings from trusted servers.To delete configurations for a trusted server, scroll tothe server, and press the backspace key. Theconfiguration settings for other applications providedby this server are also deleted.Date and time settingsSee "Clock," p. 53.Security settingsSee "Define security settings," p. 96.94Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 94 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 94 Jan 29, 2007 12:37:36 PM
Enhancement settingsSelect Menu > Tools > Settings > Enhancement.Warning:  When you use the headset, your abilityto hear outside sounds may be affected. Do not use theheadset where it can endanger your safety.With most enhancements, you can select from thefollowing settings:•Default profile — Select the profile that is activatedwhen you attach an enhancement to your device.•Automatic answer — Let the device answer phonecalls automatically when an enhancement isattached. Select On to have the device answer anincoming call automatically after 5 seconds. If theringing type is set to Beep once or Silent in theProfiles menu, automatic answer is disabled.•Lights — Select On to illuminate the device while itis attached to an enhancement.95Settingsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 95 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 95 Jan 29, 2007 12:37:36 PM
SecurityDevice securitySelect Menu > Tools > Settings > Security > Phoneand SIM.You can modify the security settings for the PIN code,automatic lock, and SIM card change, and change codesand passwords.Avoid using codes that are similar to emergencynumbers to prevent accidental dialing of theemergency number.Codes are shown as asterisks. When you change a code,enter the current code, then the new code twice.Define security settingsTo define device and SIM card settings, select a settingand Options > Change.When calls are limited to closed user groups, calls maybe possible to the official emergency numberprogrammed into your device.Define the following settings:•PIN code request — Select On to request that the PINcode is entered each time the device is switched on.This setting cannot be changed if the device isswitched off. Some SIM cards do not allow turningoff the PIN code request.•PIN code — Change the PIN code. The PIN code mustbe 4 to 8 numbers long. The PIN code protects yourSIM card against unauthorized use and is providedwith the SIM card. After three consecutive incorrectPIN code entries, the PIN code is blocked, and youneed to use the PUK code to unblock it before youcan use the SIM card again.•PIN2 code — Change the PIN2 code. The PIN2 codemust be 4 to 8 numbers long. The PIN2 code isrequired to access some functions of the device andis provided with the SIM card. After three consecutiveincorrect PIN2 code entries, the PIN2 code is blocked,and you need to use the PUK2 code to unblock itbefore you can use the SIM card again.•Autolock period  — Set a time-out after which thedevice is automatically locked and can be used onlyif the correct lock code is entered. Enter a number forthe time-out in minutes, or select None to turn offthe autolock period. When the device is locked, youcan still answer incoming calls and calls may still bepossible to the official emergency numberprogrammed into your device.•Lock code — Change the lock code. The new code canbe 4-255 characters long. Both alphabets and digitscan be used, and both uppercase and lowercasealphabets are possible. The device notifies you if thelock code is not properly formatted. The preset codeis 12345. To avoid unauthorized use of your device,change the lock code. Keep the new code secret andin a safe place separate from your device.96Securityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 96 Jan 29, 2007 12:37:36 PM
•Lock if SIM changed — Set the device to ask for thelock code when an unknown, new SIM card isinserted into your device. The device maintains a listof SIM cards that are recognized as the owner’s cards.•Allow remote lock — If you set this option on, youcan lock the device by sending a predefined textmessage from another phone. When you set thisoption on, you need to enter the remote lockmessage and confirm the message. The messagemust be at least 5 characters long. The maximumnumber of characters allowed is 8. Using more than8 characters could prevent unlocking the memorycard and require reformatting it. If reformatting thememory card is required, all information on the cardwill be lost.•Closed user group (network service) — Specify agroup of people to whom you can call and who cancall you.•Confirm SIM services (network service) — Set thedevice to display confirmation messages when youare using a SIM card service.Change the restriction passwordTo change the password used for restricting voice, fax,and data calls, select Menu > Tools > Settings > Callrestriction > Cellular call restriction > Options > Editrestr. password. Enter the current code, then the newcode twice. The restriction password must be fourdigits long. For details, contact your service provider.Fixed dialingWhen fixed dialing is activated, calls may be possible tothe official emergency number programmed into yourdevice.Press the contacts key. Select Options > SIM contacts >Fixed dialing contacts.With the fixed dialing service, you can restrict calls fromyour device to only certain phone numbers. Not all SIMcards support the fixed dialing service. Contact yourservice provider for more information.Select Options, and select from the following options:•Activ. fixed dialing — Restrict calls from your device.To cancel the service, select Deact. fixed dialing. Youneed your PIN2 code to activate and deactivate fixeddialing or edit your fixed dialing contacts. Contactyour service provider if you do not have the code.•New SIM contact — Add a phone number to the listof numbers to which calls are allowed. Enter thecontact name and phone number. To restrict calls bya country prefix, enter the country prefix in New SIMcontact. All phone numbers to which calls areallowed must start with this country prefix.•Add from Contacts — Copy a contact from Contactsto your fixed dialing list.Tip: To send text messages to the SIM contactswhile the fixed dialing service is active, youneed to add the text message center numberto the fixed dialing list.To view or edit a phone number to which calls from yourdevice are allowed, select Options > SIM contacts >Fixed dialing contacts.97Securityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 97 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 97 Jan 29, 2007 12:37:36 PM
To call the contact, press the call key.To edit the phone number, select Options > Edit. Youmay need your PIN2 code to edit your fixed dialingnumbers.To delete the contact, press the backspace key.Memory card securityYou can protect a memory card with a password toprevent unauthorized access. To set a password, selectOptions > Set password. The password can be up to 8characters long and is case-sensitive. The password isstored in your device and you do not need to enter itagain while you use the memory card on the samedevice. If you use the memory card on another device,you are asked for the password. Not all memory cardssupport password protection.To remove the memory card password, select Options >Remove password. When you remove the password,the data on the memory card is not protected againstunauthorized use.Certificate managerImportant:  Even if the use of certificates makesthe risks involved in remote connections and softwareinstallation considerably smaller, they must be usedcorrectly in order to benefit from increased security. Theexistence of a certificate does not offer any protectionby itself; the certificate manager must contain correct,authentic, or trusted certificates for increased securityto be available. Certificates have a restricted lifetime. If"Expired certificate" or "Certificate not valid yet" isshown even if the certificate should be valid, check thatthe current date and time in your device are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs to thelisted owner.Digital certificates are used to verify the origins ofsoftware but do not guarantee safety. There are threedifferent types of certificates: authority certificates,personal certificates, and server certificates. During asecure connection, a server may send a servercertificate to your device. Upon receipt, it is checkedthrough an authority certificate stored on your device.You receive notification if the identity of the server isnot authentic or if you do not have the correctcertificate in your device.Download a certificate from a web site, or receive acertificate as an e-mail attachment, or as a messagesent through a Bluetooth or infrared connection.Certificates should be used when you connect to anonline bank or a remote server to transfer confidentialinformation. They should also be used if you want toreduce the risk of viruses or other malicious software,and to check the authenticity of software when youdownload and install software to your device.Tip: When you add a new certificate, check itsauthenticity.98Securityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 98 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 98 Jan 29, 2007 12:37:36 PM
Mobile VPNSelect Menu > Tools > Settings > Connection >VPN.The Nokia mobile virtual private network (VPN) clientcreates a secure connection to compatible corporateIntranet and services, such as e-mail. Your deviceconnects from a mobile network, through the Internet,to a corporate VPN gateway that acts as a front door tothe compatible corporate network. VPN client uses IPSecurity (IPSec) technology. IPSec is a framework ofopen standards for supporting secure exchange of dataover IP networks.VPN policies define the method used by VPN client anda VPN gateway to authenticate each other, and theencryption algorithms that they use to help protect theconfidentiality of data. Contact your corporation for aVPN policy.To use VPN with an application, the application must beassociated with a VPN access point. A VPN access pointis made up of an Internet access point and a VPN policy.To manage VPN, select VPN management > Options >Open and from the following options:•VPN policies — Install, view, and update VPN policies.•VPN policy servers — Edit the connection settings ofVPN policy servers from which you can install andupdate VPN policies.•VPN log — View the log for your VPN policyinstallations, updates and synchronizations, andother VPN connections.Security settings forwireless LAN access pointsSee "Security settings for wireless LAN accesspoints," p. 93.99Securityfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 99 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 99 Jan 29, 2007 12:37:36 PM
ShortcutsHere are some of the available keyboard shortcuts inyour device. Shortcuts can make the use of theapplications more efficient.Some shortcuts are application-specific and they arenot available for all applications.General shortcutsPower key Switch between profiles. Pressand hold to switch your deviceon and off.Menu key Open the main menu screenfor access to all applications.Press and hold to switchbetween open applications.End key Close applications. Press andhold to end data connections(GPRS, data call).E-mail key Open your default e-mail box.Press and hold to begincomposing a new e-mail.Active standby modeLeft selection key +function keyLock and unlock the keypad.#Press and hold to switchbetween the general andsilent profiles.Call key Open the Log.0Press and hold to openServices and connect to theWeb.1Press and hold to call yourvoice mailbox.Number key (2–9) Call a phone number usingspeed dialing. You must firstactivate speed dialing(Menu > Tools > Settings >Call > 1-touch dialing > On).Function key + Chr Activate infrared.Function key + Ctrl Activate and deactivateBluetooth.In applicationsShift + scroll key Select text. Press and hold theshift key and scroll left or rightto select text.Ctrl+C Copy.Ctrl+X Cut.Ctrl+V Paste.Ctrl+I Italics.100Shortcutsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 100 Jan 29, 2007 12:37:36 PM
Ctrl+B Bold.Press the function keyonce (so that you see) + the other key.Enter a number or a charactermarked with color on a key.Press the function keytwice (so that you see) + the other key.Enter only numbers orcharacters marked with coloron a key.Shift key Switch between charactercases.While browsing the web#Zoom out.*Zoom in.1Return to bookmarks.2Search for text strings on theopen website.3Return to the previous page.5Switch between your openbrowser windows.8Zoom out to show the wholeweb page and outline in redwhat is viewable on thedisplay.9Go to a different web page.Image viewerCall key Send the image.0Zoom out.5Zoom in.7Zoom in. Press twice for thefull screen size.4Scroll left in the zoomedimage.6Scroll right in the zoomedimage.2Scroll up in the zoomed image.8Scroll down in the zoomedimage.3Rotate clockwise.1Rotate counterclockwise.*Switch between the full screensize and normal view.Music player5Pause a track.4Return to the beginning of thetrack. Press within twoseconds after a song hasstarted to go to the previoustrack. Press and hold torewind.101Shortcutsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 101 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 101 Jan 29, 2007 12:37:36 PM
6Go to the next track. Press andhold to fast forward.8Stop a track.102Shortcutsfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 102 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 102 Jan 29, 2007 12:37:36 PM
Battery informationYour device is powered by a rechargeable battery. Thebattery can be charged and discharged hundreds oftimes, but it will eventually wear out. When the talk andstandby times are noticeably shorter than normal,replace the battery. Use only Nokia approved batteries,and recharge your battery only with Nokia approvedchargers designated for this device.If a replacement battery is being used for the first timeor if the battery has not been used for a prolongedperiod, it may be necessary to connect the charger, thendisconnect and reconnect it to begin charging thebattery.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave a fully chargedbattery connected to a charger, since overcharging mayshorten its lifetime. If left unused, a fully chargedbattery will lose its charge over time.If the battery is completely discharged, it may takeseveral minutes before the charging indicator appearson the display or before any calls can be made.Use the battery only for its intended purpose. Never useany charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as acoin, clip, or pen causes direct connection of the positive(+) and negative (-) terminals of the battery. (These looklike metal strips on the battery.) This might happen, forexample, when you carry a spare battery in your pocketor purse. Short-circuiting the terminals may damagethe battery or the connecting object.Leaving the battery in hot or cold places, such as in aclosed car in summer or winter conditions, will reducethe capacity and lifetime of the battery. Always try tokeep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not worktemporarily, even when the battery is fully charged.Battery performance is particularly limited intemperatures well below freezing.Do not dispose of batteries in a fire as they may explode.Batteries may also explode if damaged. Dispose ofbatteries according to local regulations. Please recyclewhen possible. Do not dispose as household waste.Do not dismantle or shred cells or batteries. In the eventof a battery leak, do not allow the liquid to come incontact with the skin or eyes. In the event of such a leak,flush your skin or eyes immediately with water, or seekmedical help.103Battery informationfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 103 Jan 29, 2007 12:37:36 PM
Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. Tocheck that you are getting an original Nokia battery,purchase it from an authorized Nokia dealer, look forthe Nokia Original Enhancements logo on thepackaging, and inspect the hologram label using thefollowing steps:Successful completion of the four steps is not a totalassurance of the authenticity of the battery. If you haveany reason to believe that your battery is not anauthentic, original Nokia battery, you should refrainfrom using it, and take it to the nearest authorizedNokia service point or dealer for assistance. Yourauthorized Nokia service point or dealer will inspect thebattery for authenticity. If authenticity cannot beverified, return the battery to the place of purchase.Authenticate hologram1. When looking at the hologramon the label, you should see theNokia connecting handssymbol from one angle and theNokia Original Enhancementslogo when looking fromanother angle.2. When you angle the hologramleft, right, down, and up, youshould see 1, 2, 3, and 4 dotson each side respectively.3. Scratch the side of the label toreveal a 20-digit code, forexample,12345678919876543210.Turn the battery so that thenumbers are facing upwards.The 20-digit code readsstarting from the number atthe top row followed by thebottom row.4. Confirm that the 20-digit codeis valid by following theinstructions atwww.nokia.com/batterycheck.104Nokia battery authentication guidelinesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 104 Jan 29, 2007 12:37:36 PM
What if your battery is notauthentic?If you cannot confirm that your Nokia battery with thehologram on the label is an authentic Nokia battery,please do not use the battery. Take it to the nearestauthorized Nokia service point or dealer for assistance.The use of a battery that is not approved by themanufacturer may be dangerous and may result in poorperformance and damage to your device and itsenhancements. It may also invalidate any approval orwarranty applying to the device.To find out more about original Nokia batteries, visitwww.nokia.com/battery.105Nokia battery authentication guidelinesfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 105 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 105 Jan 29, 2007 12:37:36 PM
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thefollowing suggestions will help you protect yourwarranty coverage.•Keep the device dry. Precipitation, humidity, and alltypes of liquids or moisture can contain mineralsthat will corrode electronic circuits. If your devicedoes get wet, remove the battery, and allow thedevice to dry completely before replacing it.•Do not use or store the device in dusty, dirty areas.Its moving parts and electronic components can bedamaged.•Do not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or melt certainplastics.•Do not store the device in cold areas. When thedevice returns to its normal temperature, moisturecan form inside the device and damage electroniccircuit boards.•Do not attempt to open the device other than asinstructed in this guide.•Do not drop, knock, or shake the device. Roughhandling can break internal circuit boards and finemechanics.•Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.•Do not paint the device. Paint can clog the movingparts and prevent proper operation.•Use a soft, clean, dry cloth to clean any lenses, suchas camera, proximity sensor, and light sensor lenses.•Use only the supplied or an approved replacementantenna. Unauthorized antennas, modifications, orattachments could damage the device and mayviolate regulations governing radio devices.•Use chargers indoors.•Always create a backup of data you want to keep,such as contacts and calendar notes.•To reset the device from time to time for optimumperformance, power off the device and remove thebattery.These suggestions apply equally to your device, battery,charger, or any enhancement. If any device is notworking properly, take it to the nearest authorizedservice facility for service.DisposalThe crossed-out wheeled-bin symbol on yourproduct, literature, or packaging reminds you thatin the European Union all electrical and electronicproducts, batteries, and accumulators must betaken to separate collection at the end of their workinglife. Do not dispose of these products as unsortedmunicipal waste.106Care and maintenancefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 106 Jan 29, 2007 12:37:36 PM
Return the products to collection to prevent possibleharm to the environment or human health fromuncontrolled waste disposal and to promote thesustainable reuse of material resources. Collectioninformation is available from the product retailer, localwaste authorities, national producer responsibilityorganizations, or your local Nokia representative. Formore information, see product Eco-Declaration orcountry-specific information at /www.nokia.com.107Care and maintenancefile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 107 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 107 Jan 29, 2007 12:37:36 PM
Additional safety informationSmall childrenYour device and its enhancements may contain smallparts. Keep them out of the reach of small children.Operating environmentThis device meets RF exposure guidelines when usedeither in the normal use position against the ear orwhen positioned at least 2,2 centimeters (7/8 inches)away from the body. When a carry case, belt clip, orholder is used for body-worn operation, it should notcontain metal and should position the device theabove-stated distance from your body.To transmit data files or messages, this device requiresa quality connection to the network. In some cases,transmission of data files or messages may be delayeduntil such a connection is available. Ensure the aboveseparation distance instructions are followed until thetransmission is completed.Parts of the device are magnetic. Metallic materials maybe attracted to the device. Do not place credit cards orother magnetic storage media near the device, becauseinformation stored on them may be erased.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer of themedical device to determine if they are adequatelyshielded from external RF energy or if you have anyquestions. Switch off your device in health care facilitieswhen any regulations posted in these areas instruct youto do so. Hospitals or health care facilities may be usingequipment that could be sensitive to external RFenergy.Implanted medical devicesManufacturers of medical devices recommend that aminimum separation of 15.3 centimeters (6 inches)should be maintained between a wireless device andan implanted medical device, such as a pacemaker orimplanted cardioverter defibrillator, to avoid potentialinterference with the medical device. Persons who havesuch devices should:•Always keep the wireless device more than 15.3centimeters (6 inches) from the medical device whenthe wireless device is turned on.•Not carry the wireless device in a breast pocket.•Hold the wireless device to the ear opposite themedical device to minimize the potential forinterference.•Turn the wireless device off immediately if there isany reason to suspect that interference is takingplace.108Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 108 Jan 29, 2007 12:37:36 PM
•Read and follow the directions from themanufacturer of their implanted medical device.If you have any questions about using your wirelessdevice with an implanted medical device, consult yourhealth care provider.Hearing aidsSome digital wireless devices may interfere with somehearing aids. If interference occurs, consult your serviceprovider.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bag systems.For more information, check with the manufacturer, orits representative, of your vehicle or any equipmentthat has been added.Only qualified personnel should service the device orinstall the device in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty that may apply to the device. Check regularlythat all wireless device equipment in your vehicle ismounted and operating properly. Do not store or carryflammable liquids, gases, or explosive materials in thesame compartment as the device, its parts, orenhancements. For vehicles equipped with an air bag,remember that air bags inflate with great force. Do notplace objects, including installed or portable wirelessequipment in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey all signsand instructions. Potentially explosive atmospheresinclude areas where you would normally be advised toturn off your vehicle engine. Sparks in such areas couldcause an explosion or fire resulting in bodily injury oreven death. Switch off the device at refueling pointssuch as near gas pumps at service stations. Observerestrictions on the use of radio equipment in fueldepots, storage, and distribution areas; chemicalplants; or where blasting operations are in progress.Areas with a potentially explosive atmosphere areoften, but not always, clearly marked. They includebelow deck on boats, chemical transfer or storagefacilities, vehicles using liquefied petroleum gas (suchas propane or butane), and areas where the air containschemicals or particles such as grain, dust, or metalpowders.Emergency callsImportant:  Wireless phones, including thisdevice, operate using radio signals, wireless networks,landline networks, and user-programmed functions.109Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 109 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 109 Jan 29, 2007 12:37:36 PM
Because of this, connections in all conditions cannot beguaranteed. You should never rely solely on anywireless device for essential communications likemedical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength.Some networks may require that a valid SIM card isproperly inserted in the device.2. Press the end key as many times as needed to clearthe display and ready the device for calls.3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.If certain features are in use, you may first need to turnthose features off before you can make an emergencycall. If the device is in the offline or flight profile mode,you may need to change the profile to activate thephone function before you can make an emergency call.Consult this guide or your service provider for moreinformation.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wirelessdevice may be the only means of communication at thescene of an accident. Do not end the call until givenpermission to do so.CERTIFICATIONINFORMATION (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TORADIO WAVES.Your mobile device is a radio transmitter and receiver.It is designed not to exceed the limits for exposure toradio waves recommended by international guidelines.These guidelines were developed by the independentscientific organization ICNIRP and include safetymargins designed to assure the protection of allpersons, regardless of age and health.The exposure guidelines for mobile devices employ aunit of measurement known as the Specific AbsorptionRate or SAR. The SAR limit stated in the ICNIRPguidelines is 2.0 watts/kilogram (W/kg) averaged over10 grams of tissue. Tests for SAR are conducted usingstandard operating positions with the devicetransmitting at its highest certified power level in alltested frequency bands. The actual SAR level of anoperating device can be below the maximum valuebecause the device is designed to use only the powerrequired to reach the network. That amount changesdepending on a number of factors such as how closeyou are to a network base station. The highest SAR valueunder the ICNIRP guidelines for use of the device at theear for device types E61i-1 (RM-227) and E61i-2(RM-294) are as follows:E61i-1 (RM-227): 0.90 W/kgE61i-2 (RM-294): 0.57 W/kgUse of device accessories and enhancements may resultin different SAR values. SAR values may vary depending110Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 110 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 110 Jan 29, 2007 12:37:36 PM
on national reporting and testing requirements and thenetwork band. Additional SAR information may beprovided under product information atwww.nokia.com.For additional information, refer to the reference leafletincluded with your Nokia device.Your mobile device is also designed to meet therequirements for exposure to radio waves establishedby the Federal Communications Commission (USA) andIndustry Canada. These requirements set a SAR limit of1.6 W/kg averaged over one gram of tissue. The highestSAR value reported under this standard during productcertification for device types E61i-1 (RM-227) and E61i-2(RM-294) are as follows:When tested for use at the ear:E61i-1 (RM-227): 0.83 W/kgE61i-2 (RM-294): 1.12 W/kgWhen worn on the body, as described in this user guide:E61i-1 (RM-227): 0.79 W/kgE61i-2 (RM-294): 0.81 W/kgInformation about this device model can be found atwww.fcc.gov/oet/fccid by searching the equipmentauthorization system using FCC IDs: PYARM-227 andPYARM-294.111Additional safety informationfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 111 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 111 Jan 29, 2007 12:37:36 PM
IndexSymbols/Numerics1-touch dialing 353G 54Aaccess points 61, 90answering calls 36application manager 77applicationscommon actions 12attachments 22audio files 83authority certificates 98automatic answer 95Bblogs 70Bluetoothconnections 55pairing 57settings 56bookmarks 69browsing Web pages 68, 71business cards 47Ccable 55calculator 74calendar 51calling 35callsforwarding 36restricting 36settings 89camera 80recording a video clip 80taking a picture 80certificates 98chat 27clock 53connecting to the Internet 61connection manager 62connection methodsBluetooth 55cable 55infrared 59modem 60connectionsGPRS settings 61WLAN settings 66, 92contact groups 46contact information 47contactsadding 46copying information 47default information 47groups 46ringing tones 47copying text 11Ddataconnections 54declining calls 36displaysettings 89documents 72Ee-mailaccounts 32messages 19replying 22writing 23email data roaming 60ending network connections 62enhancement settings 95equalizer 85Ffeeds 70file manager 72Find 16flash player 86forwarding calls 36Ggallery 82112Indexfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 112 Jan 29, 2007 12:37:36 PM
GPRS 54access point settings 61settings 91IIM 27imagesadd to contacts 83set as wallpaper 83zooming in or out 82infrared 59instant messaging 27Internet 68access points 61net call settings 90settings 61Llanguage 88listening to music 84logs 45MmailSee e-mailmedia applications 82memory 12monitoring 12memory card 12passwords 98menu 10messagesdeleting 22e-mail 19folders 19multimedia messages 25picture messages 24special messages 30text messages 23mobile VPNSee VPNmodem 60multimedia messagescreating 25receiving 26replying to 26sending 25settings 31music player 84Nnet calls 42, 43Nokia Team suite 49editing teams 49notes 74notification light 16Ppacket data 54access point settings 61settings 91pairing 57passwordsmemory card 98pasting text 11personal certificates 98personalization 14, 15phonecalls 35language 88settings 88video calls 37photos 80picture messages 24playingmusic 84video and audio 83voice recordings 86presentations 73printing 73profiles 14QQuickoffice 72Quickpoint 73Quicksheet 73Quickword 72RRealPlayerplaying media clips 83settings 84recordingcalls 86video clips 80voice 86rejecting calls 36remote configurationsettings 77remote synchronization 77113Indexfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 113 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 113 Jan 29, 2007 12:37:36 PM
restrictingcalls 36restriction password 97ringing tones 47Sscreen export 75scroll key 88Search 16securitydevice 96memory card 98selecting text and objects 11selection key settings 88service commands 30settingsBluetooth 56calendar 52calls 89connection 90display 89general 88Internet 61multimedia messages 31profiles 14remote configuration 77security 96standby 88text messages 31Web 70WLAN 92Settings Wizard 78shortcuts 100SIM access profile 58SIM cardtext messages 24SMS messages 23special messages 30Speech 14spreadsheets 73standbysettings 88storage 12Ttextcopying 11pasting 11selecting 11writing 11text messagesmanaging messages in the SIMcard 24replying 24sending 23writing 23themes 15to-do list 51track lists 85UUMTS (3G) 54USB data cable 55Vvideo calls 37video clips 80, 83virtual private network 99voice commands 44voice dialing 44voice mailbox 35voice memos 86voice over IP 42, 43voice recorder 86VoIP 42, 43volume 85VPN 99WWeb 68settings 70welcome note 88wireless LANad hoc network 65infrastructure 65WLANaccess point settings 66security settings 93settings 92write text 11writing language 88114Indexfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 114 Jan 29, 2007 12:37:36 PMfile:///C:/USERS/MODEServer/lkatajis/3482293/rm-227_slender/en/issue_1/rm-227_slender_en_1.xml Page 114 Jan 29, 2007 12:37:36 PM

Navigation menu