Microsoft RM-245 Quad band GSM phone with Bluetooth User Manual R1130 en

Download:
Mirror Download [FCC.gov]
Document ID	780346
Application ID	/uE0980qGPt3LV4iT9ypdw==
Document Description	Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	190.35kB (2379402 bits)
Date Submitted	2007-04-13 00:00:00
Date Available	2007-04-13 00:00:00
Creation Date	2007-02-07 10:35:57
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-04-11 10:43:20
Document Title	R1130_en.book
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Lisa

Wednesday, February 7, 2007
10:29 AM
2 Scroll to the desired style, and select Options >
Customise.
3 Reorder and edit the selected items, or add or remove
items from your muvee in Videos & images or Music.
In Videos & images, you can define the order in which
the files are played in the muvee. To select the file you
want to move, press . Then scroll to the file below
which you want to place the marked file, and press .
To add or remove images and videos from the muvee,
select Options > Add/Remove.
To add albums and their content to the muvee, in the
image or video clip list view, select Options > Albums.
To cut the video clips, In Videos & images, select
Options > Select contents. See ‘Select content’, p. 61.
In Message you can add an opening and closing text to
a muvee.
In Length, you can define the length of the muvee.
Select from the following:
Multimedia message—to optimize the length of the
muvee for MMS sending
Auto-select—to include all the selected images and
video clips in the muvee
Same as music—to set the muvee duration to be the
same as the chosen music clip
User defined—to define the length of the muvee
4 Select Options > Create muvee. The preview view
opens.
5 To preview the custom muvee before saving it, select
Options > Play.
6 To save the muvee, select Options > Save.
Gallery
R1130_en.book Page 61
To create a new custom muvee by using the same style
settings, select Options > Recreate.
Select content
To edit the selected video clips, in the Videos & images
folder, select Options > Select contents. You can select
which parts of the video clip you want to include or
exclude in the muvee. In the slide, green indicates
included, red indicates excluded, and grey indicates
neutral parts.
To include a part of the video clip in the muvee, scroll to
the part, and select Options > Include. To exclude a part,
select Options > Exclude. To exclude a shot, select
Options > Exclude shot.
To let Movie director randomly include or exclude a
certain part of the video clip, scroll to the part, and select
Options > Mark as neutral. To randomly include or
exclude parts of the clip, select Options > Mark all as
neutral.
Settings
In the style selection view, select Options > Customise >
Settings to edit the following options:
61
Gallery
R1130_en.book Page 62
Wednesday, February 7, 2007
10:29 AM
Memory in use—Select where to store your muvees.
Resolution—Select the resolution of your muvees. Select
Automatic to use the optimal resolution based on the
number and length of the video clips you have selected.
Default muvee name—Set a default name for the
muvees.
Print online
With Print online, you can order prints of images online
directly to your home, or to a store where you can pick
them up. You can also order different products with the
selected image, such as mugs or mouse pads. The available
products depend on the service provider.
To use Print online, you must have at least one printing
service configuration file installed. The files can be
obtained from printing service providers that support
Print online.
For more information on the application, see the
Additional applications leaflet for your device at
www.nokia.com/support or your local Nokia website.
Online sharing
With Online share, you can share images and video clips
in compatible online albums, weblogs, or in other online
62
sharing services on the web. You can upload content, save
unfinished posts as drafts and continue later, and view the
content of the albums. The supported content types may
vary depending on the service provider.
To use Online share, you must subscribe to the service
with an online image sharing service provider, and create
a new account. You can usually subscribe to the service on
the web page of the service provider. Contact your service
provider for details on subscribing to the service. For more
information on compatible service providers, see the
product support pages at www.nokia.com/support or your
local Nokia website.
For more information on the application, see the
Additional applications leaflet for your device at
www.nokia.com/support or your local Nokia website.
Wednesday, February 7, 2007
10:29 AM
Positioning
The Global Positioning System (GPS) is a worldwide radio
navigation system that includes 24 satellites and their
ground stations that monitor the operation of the
satellites. Your device has an internal GPS receiver.
A GPS terminal, such as the GPS receiver in your device,
receives low-power radio signals from the satellites, and
measures the travel time of the signals. From the travel
time, the GPS receiver can calculate its location to the
accuracy of meters.
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by adjustments
to GPS satellites made by the United States government
and is subject to change with the United States
Department of Defense civil GPS policy and the Federal
Radionavigation Plan. Accuracy can also be affected by
poor satellite geometry. Availability and quality of GPS
signals may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver should
only be used outdoors to allow reception of GPS signals.
GPS should only be used as a navigation aid. It should not
be used for precise location measurement and you should
never rely solely on location data from the GPS receiver for
positioning or navigation.
Positioning
R1130_en.book Page 63
GPS receiver
The GPS receiver is
located in the bottom of
the device. When using
the receiver, slide the
numeric keypad open
and hold the device
upright in your hand at
an angle of about 45
degrees, with a clear
view of the sky.
Establishing a GPS connection may take from a couple of
seconds to several minutes. Establishing a GPS connection
in the car may take longer.
The GPS receiver takes its power from the battery. Using
the GPS receiver may drain the battery faster.
63
Positioning
R1130_en.book Page 64
Wednesday, February 7, 2007
10:29 AM
About satellite signals
Maps
If your device cannot find the satellite signal, consider the
following:
• If you are indoors, go outdoors to receive a better
signal.
• If the numeric keypad slide is closed, open it.
• If you are outdoors, move to a more open space.
• Check that your hand does not cover the GPS antenna
of your device. For the location of the antenna, see
‘GPS receiver’, p. 63.
• If the weather conditions are bad, in such a case the
signal strength may also be affected.
• Establishing a GPS connection may take from a couple
of seconds to several minutes.
Press
, and select Maps. With Maps, you can see your
current location on the map, browse maps for different
cities, search for addresses and different points of interest,
plan routes from one location to another, and save
locations as landmarks and send them to compatible
devices.
Position requests
When you use Maps for the first time, you may need to
define an internet access point. To change the default
access point later, select Options > Settings > Network >
Default access point.
You may receive a request from a network service to
receive your position information. Service providers may
offer information about local topics, such as weather or
traffic conditions, based upon the location of your device.
When you receive a position request, a message is
displayed showing the service that is making the request.
Select Accept to allow your position information to be
sent or Reject to deny the request.
64
You can also purchase extra services, such as city guides
and a navigation service with voice guidance.
Maps uses GPS. You can define the positioning methods
used with your device in the device settings. See
‘Positioning’, p. 107. For the most accurate location
information, use either the internal GPS or the external
GSP receiver.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography that you have in your device.
Browse maps
When you open Maps, you see an overview of the globe.
When your device finds the satellite signal, Maps starts to
Wednesday, February 7, 2007
10:29 AM
locate your device, and zooms in to your current location
in China. The China maps are saved on a memory card
supplied with your device (if inserted).
To view information about satellites when you are using
Maps, select Options > View > Satellite info.
Your current location is indicated on the map. The compass
rose shows the orientation of the map, which is towards
north by default.
To move on the map, scroll up, down, left, or right. To view
detailed information of a location on the map, scroll to it,
press
and select Details. To return to your current
location, select Back or Options > Current location.
To zoom in or out on the map, press
or
between the 2-D and 3-D views, press
. To switch
To define what kind of points of interest are shown on the
map, select Options > View > Categories and the desired
categories.
To save a location as a landmark, in the desired location,
press , and select Save location > As landmark, enter a
name for the landmark, and select the categories you want
to include it in. To take a screenshot of your location, select
Save location > As image. The screenshot is saved in
Gallery.
To view saved landmarks, select Options > Favourites.
To send a landmark to a compatible device, in Favourites,
select Options > Landmark location > Send location. If
you send the landmark in a text message, the information
is converted to plain text.
To adjust the network, routing, and general settings, select
Options > Settings.
Positioning
R1130_en.book Page 65
Search for locations
To view points of interest near your current location or
other locations on the map, select Options > Search > By
category.
To search for a point of interest by name, select Options >
Search > By name or start entering the first letters of the
name, and select Search.
To search for a location, select Options > Search > By
address. You must enter the city and country. To use an
address you have saved for a contact in Contacts, select
Options > Search > By address > Options > Select from
contacts.
To view a search result on a map, press . To switch
between the search results, press or . To move on the
map, select Options > Full screen, and use the scroll key.
Plan a route
To plan a route from one location to another (for example,
from your home to your office), select Options > Plan
route. Select the start and end point for the route.
65
Positioning
R1130_en.book Page 66
Wednesday, February 7, 2007
10:29 AM
To adjust the routing settings, such as the mode of
transportation, select Options > Settings > Routing.
To view the route itinerary, select Options > Show route.
The route is calculated using the selected routing settings.
To view the itinerary waypoints on the map, select
Options > Show on map.
To run a simulation of the created route, select Options >
Start simulation.
To track the route and your current GPS position, select
Options > Start tracking.
Tip! You can also use a compatible GPS receiver with
Bluetooth connectivity with Maps. For example, in a
car, an external GPS receiver can be positioned so that
it has a clear view of the sky. To enable the use of an
external GPS receiver, see ‘Positioning’, p. 107.
Extra services for Maps
To purchase and download city guides for different cities
to your device, or purchase a navigation service with voice
guidance to use it in Maps, select Options > Extra
services > City guides or Add navigation.
The downloaded guides are automatically saved in the
device memory or on a compatible memory card (if
inserted).
66
Navigation
After purchasing the navigation upgrade, the service is
available through Maps.
After creating a route in Maps, to start navigation to the
desired destination with GPS using voice guidance, select
Options > Start navigation.
When you use navigation for the first time, you are
prompted to select the language of the voice guidance,
and download the voice guidance files of the selected
language online. To change the language later, in Maps
main view, select Options > Settings > General > Voice
guidance, a language, and download the voice guidance
files for the selected language online.
To discard the created route, and use another route, select
Options > Alternative route.
To view only the next turns and hide the map, select
Options > View > Next turns.
To stop navigation, select Options > Stop navigation.
City guides
City guides provide information about attractions,
restaurants, hotels, and other points of interest. The guides
must be downloaded and purchased before use.
To browse a downloaded guide, on the My guides tab in
City guides, select a guide and a subcategory (if available).
Wednesday, February 7, 2007
10:29 AM
To download a new guide to your device, in City guides,
scroll right to the Nearest guides or All guides tab, select
the desired guide, and press OK. To purchase the guide,
scroll left to the My guides tab, select the downloaded
guide, and enter your payment details. You can pay for the
guides through a credit card.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and press
. Scroll to the desired field and enter the information.
To confirm the purchase, select OK twice. To receive a
confirmation of the purchase through e-mail, enter your
name and e-mail address, and select OK.
You can sort your landmarks into the preset categories,
and create new categories. To edit and create new
landmark categories, press
in Landmarks, and select
Options > Edit categories.
Landmarks
Press
, and select Tools > Landmarks. With
Landmarks, you can save the position information of
specific locations in your device. You can sort the saved
locations into different categories, such as business, and
add other information, such as addresses, to them. You can
use your saved landmarks in compatible applications, such
as GPS data and Maps.
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
To create a new landmark, select Options > New
landmark. To make a positioning request for the
coordinates of your current location, select Current
position. To enter the position information manually,
select Enter manually.
To view the landmark on the map, select Options > Show
on map. To create a route to the location, select
Options > Navigate using map.
Positioning
R1130_en.book Page 67
To add a landmark to a category, scroll to the landmark in
Landmarks, and select Options > Add to category. Scroll
to each category to which you want to add the landmark,
and select it.
To send one or several landmarks to a compatible device,
select Options > Send. Your received landmarks are
placed in the Inbox folder in Messaging.
GPS data
Press
, and select Tools > GPS data. GPS data is
designed to provide route guidance information to a
selected destination, position information about your
current location, and traveling information, such as the
approximate distance to the destination and approximate
duration of travel.
67
Positioning
R1130_en.book Page 68
Wednesday, February 7, 2007
10:29 AM
The coordinates in the GPS are expressed in degrees and
decimal degrees format using the international WGS-84
coordinate system.
To use GPS data, the GPS receiver of your device must
receive position information from at least three satellites
to calculate the coordinates of your location.
Route guidance
To use route guidance, select Navigation. Start the route
guidance outdoors. If started indoors, the GPS receiver
may not receive the necessary information from the
satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination,
and the approximate distance to it is shown inside the
compass ring.
Route guidance is designed to show the straightest route
and the shortest distance to the destination, measured in
a straight line. Any obstacles on the route, such as
buildings and natural obstacles, are ignored. Differences
in altitude are not taken into account when calculating
the distance. Route guidance is active only when you
move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter
68
the latitude and longitude coordinates. Select Stop
navigation to clear the destination set for your trip.
Retrieve position information
To view the position information of your current location,
select Position. An estimate of the accuracy of the location
is shown on the display.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved locations
with more information, and they can be used in other
compatible applications and transferred between
compatible devices.
Trip meter
Select Trip distance > Options > Start to activate trip
distance calculation, and Stop to deactivate it. The
calculated values remain on the display. Use this feature
outdoors to receive a better GPS signal.
Select Reset to set the trip distance and time and average
and maximum speeds to zero, and to start a new
calculation. Select Restart to also set the odometer and
total time to zero.
The trip meter has limited accuracy, and rounding errors
may occur. Accuracy can also be affected by availability
and quality of GPS signals.
Wednesday, February 7, 2007
10:29 AM
Personalize your device
To personalize your device, select from the following:
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 71.
• To change the standby mode background image or
what is shown in the screen saver, see ‘Change the look
of your device’, p. 71.
• To customize the ringing tones, see ‘Profiles—set tones’,
p. 69 and ‘Add ringing tones for contacts’, p. 94.
• To change the shortcuts assigned for the different
presses of the scroll key and left and right selection
keys in the standby mode, see ‘Standby mode’, p. 103.
• To change the clock shown in the standby mode, press
, and select Applications > Clock > Options >
Settings > Clock type > Analogue or Digital.
• To change the welcome note to an image or animation,
press , and select Tools > Settings > General >
Personalisation > Display > Welcome note / logo.
• To change the main menu view, in the main menu,
select Options > Change Menu view > Grid or List.
• To use animated icons in your device, in the main menu,
select Options > Icon animation > On.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders and place
applications that you use more often into the main
menu.
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press
, and select Tools > Profiles.
Personalize your device
R1130_en.book Page 69
To change the profile, select Tools > Profiles, a profile,
and Options > Activate. You can also change the profile
by pressing
in the standby mode. Scroll to the profile
you want to activate, and select OK.
Tip! To switch between the general and silent
profiles, press and hold
To modify a profile, press
, and select Tools > Profiles.
Scroll to the profile, and select Options > Personalise.
Scroll to the setting you want to change, and press
to
open the choices. Tones stored on a compatible memory
card (if inserted) are indicated with .
In the tones list, the Download sounds link (network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a web page to
download more tones.
69
Personalize your device
R1130_en.book Page 70
Wednesday, February 7, 2007
10:29 AM
If you want the caller’s name to be spoken when your
device rings, select Options > Personalise, and set Say
caller's name to On. The caller’s name must be saved in
Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless
network is turned off, as indicated by
in the signal
strength indicator area. All wireless RF signals to and from
the device are prevented. If you try to send messages, they
are placed in the outbox to be sent later.
When the Offline profile is active, you can use your device
without a SIM card.
Important: In the offline profile you cannot make
or receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
You can still use Bluetooth connectivity while in the
Offline profile. See ‘Bluetooth connectivity’, p. 25.
70
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength).
3-D tones
Press , and select Tools > 3-D tones. With 3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select Ringing
tone and the desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed—Scroll left or right to adjust the speed at
which sound moves from one direction to another. This
setting is not available for all ringing tones.
Reverberation—Select the type of echo.
Doppler effect—Select On to have the ringing tone sound
higher when you are closer to your device, and lower when
you are farther away. When you get closer to the device,
the ringing tone appears to become higher, and lower
when you move away from it. This setting is not available
for all ringing tones.
Wednesday, February 7, 2007
10:29 AM
To listen to the ringing tone with the 3–D effect, select
Options > Play tone.
To change the layout of the main menu, select Themes >
Menu view.
If you enable the 3-D tones but do not select any 3-D
effect, stereo widening is applied to the ringing tone.
To open a browser connection and download more
themes, in General or Menu view, select Download
themes (network service).
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing volume.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press
, and select Tools > Themes.
To change the theme that is used for all the applications in
your device, select Themes > General. To change the
theme of a certain application, in the main view, select an
application.
To preview a theme before activating it, select Options >
Preview. To activate the theme, select Options > Set. The
active theme is indicated by
The themes on a compatible memory card (if inserted) are
indicated by . The themes on the memory card are not
available if the memory card is not inserted in the device.
If you want to use the themes saved in the memory card
without the memory card, save the themes in the device
memory first.
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To edit the wallpaper and power saver of the current
theme, select Themes > Wallpaper to change the
background image on the display for the active standby
mode or Power saver to change the power saver that
appears on the display for the active standby mode. See
also ‘Display’, p. 102 for power saver time-out setting.
Personalize your device
R1130_en.book Page 71
Active standby mode
The active standby display shows application shortcuts,
and events from applications such as calendar and player.
To switch the active standby on or off, press , and select
Tools > Settings > General > Personalisation > Standby
mode > Active standby.
71
Personalize your device
R1130_en.book Page 72
Wednesday, February 7, 2007
10:29 AM
Scroll to an application or
event, and press .
The standard scroll key
shortcuts available in the
standby mode cannot be
used when the active
standby mode is on.
To change the default
applications’ shortcuts, press
, and select Tools >
Settings > General >
Personalisation > Standby
mode > Active standby apps..
Some shortcuts may be fixed, and you cannot change
them.
72
Wednesday, February 7, 2007
10:29 AM
Time management
Clock
World clock
Press
, and select Applications > Clock. To view your
active and inactive alarms, press
. To set a new alarm,
select Options > Set alarm. When an alarm is active,
is shown.
To open the world clock view, select Clock, and press
twice. In the world clock view, you can view the time in
different cities. To add cities to the list, select Options >
Add city. You can add a maximum of 15 cities to the list.
To turn off the alarm, select Stop. To stop the alarm for 5
minutes, select Snooze.
To set your current city, scroll to a city, and select
Options > Set as current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Applications > Clock >
Options > Remove alarm.
To change clock settings, select Applications > Clock >
Options > Settings > Time or Date, Clock type, or Clock
alarm tone.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Network operator time > Auto-update.
Time management
R1130_en.book Page 73
Calendar
Press
, and select Calendar. To add a new calendar
entry, scroll to the desired date, select Options > New
entry and one of the following:
1 Meeting—to remind you of an appointment that has a
specific date and time
Meeting request—to create and send a new meeting
request. You need to have a mailbox set up for sending
requests. See ‘Mailbox’, p. 79.
Memo—to write a general entry for a day
73
Time management
R1130_en.book Page 74
Wednesday, February 7, 2007
10:29 AM
Anniversary—to remind
you of birthdays or
special dates (entries are
repeated every year)
To-do—to remind you of
a task that needs doing
by a specific date
2 Fill in the fields. To set an
alarm, select Alarm >
On, and enter the Alarm
time and Alarm date.
To add a description for
an entry, select
Options > Add description.
3 To save the entry, select Done.
Shortcut: In the day, week, or month calendar view,
press any key (
—
). An appointment entry opens,
and the characters you enter are added to Subject. In
the to-do view, a to-do note entry opens.
When the calendar alarms for a note, select Silence to
turn off the calendar alarm tone. The reminder text stays
on the screen. To end the calendar alarm, select Stop. To
set the alarm to snooze, select Snooze.
You can synchronize your calendar with a compatible PC
using Nokia PC Suite. When creating a calendar entry, set
the desired Synchronisation option.
74
Calendar views
Select Options > Settings to change the starting day of
the week or the view that is shown when you open the
calendar.
To go to a certain date, select Options > Go to date. To
jump to today, press
To switch between the month view, week view, day view,
and to-do view, press
To send a calendar note to a compatible device, select
Options > Send.
If the other device is not compatible with Coordinated
Universal Time (UTC), the time information of received
calendar entries may not be displayed correctly.
To modify the calendar, select Options > Settings >
Calendar alarm tone, Default view, Week starts on, and
Week view title.
Manage your calendar entries
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
Wednesday, February 7, 2007
10:29 AM
Lunar calendar
To use Lunar calendar funtions, the device language must
be in Chinese.
To view detailed Lunar calendar information of the
currently highlighted date:
1 In calendar views, select Options >Settings > Lunar
calendar, and set Lunar calendar item as on.
2 Go back to calendar views, Lunar information is
displayed in the navigation pane. To view more detailed
Lunar info in a pop-up window, select Options > Show
lunar data. This option is displayed only when the
Lunar calendar setting item is on.
Time management
R1130_en.book Page 75
75
Messaging
R1130_en.book Page 76
Wednesday, February 7, 2007
10:29 AM
Messaging
Press
, and select Messaging (network service).
Only devices that have compatible features can receive
and display multimedia messages. The appearance of a
message may vary depending on the receiving device.
To create a new message, select New message.
Messaging contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder. You can also create
and save your own templates.
Mailbox—Connect to your remote mailbox to retrieve
your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 83.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last messages that have been sent,
excluding messages sent using Bluetooth connectivity or
76
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 85.
Outbox—Messages waiting to be sent are temporarily
stored in the outbox, for example, when your device is
outside network coverage.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service).
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messaging.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast.
A packet data connection may prevent cell broadcast
reception.
Wednesday, February 7, 2007
10:29 AM
Write text
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
To switch between the letter and number mode, press and
hold
. To switch between the different character
modes, press
To insert a number in the letter mode, press and hold the
desired number key.
clipboard, while still holding
, select Copy. To
insert the text into a document, press and hold
and select Paste.
Write and send messages
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘E-mail settings’, p. 79 and ‘E-mail’, p. 83.
is displayed when you write text using traditional
text input and
when using predictive text input.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
With predictive text, you can enter any letter with a single
keypress.
1 Select New message and from the following:
To activate predictive text input, press
Predictive text on.
, and select
Tip! To turn predictive text input on or off, quickly
press
twice.
Edit text and lists
• To mark an item in a list, scroll to it, and press
and
at the same time.
• To mark multiple items in a list, press and hold
while you press
or . To end the selection, release
, then release
• To copy and paste text, while pressing and holding
press
or
to highlight text. To copy the text to
Messaging
R1130_en.book Page 77
Text message—to send a text message
Multimedia message—to send a multimedia message
(MMS)
Audio message—to send an audio message (a
multimedia message that includes one sound clip)
E-mail—to send an e-mail
2 In the To field, press to select recipients or groups
from contacts, or enter the recipient’s phone number
or e-mail address. To add a semicolon (;) that separates
the recipients, press
. You can also copy and paste
the number or address from the clipboard.
3 In the Subject field, enter the subject of a multimedia
message or e-mail. To change the fields that are
visible, select Options > Address fields.
77
Messaging
R1130_en.book Page 78
10:29 AM
4 In the message field,
78
Wednesday, February 7, 2007
write the message. To
insert a template, select
Options > Insert or
Insert object >
Template.
To add a media object to
a multimedia message,
select Options > Insert
object > Image, Sound
clip, or Video clip.
To take a new picture or
record sound or video for
a multimedia message, select Insert new > Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
To see what the multimedia message looks like, select
Options > Preview.
To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, Note, or Other
for other file types. E-mail attachments are indicated
by .
To send the message, select Options > Send, or press
Note: Your device may indicate that your message
was sent to the message center number programmed
into your device. Your device may not indicate whether
the message is received at the intended destination.
For more details about messaging services, contact your
service provider.
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options, take up more space, limiting the number
of characters that can be sent in a single message.
You may not be able to send video clips that are saved in
the .mp4 format or that exceed the size limit of the
wireless network in a multimedia message. To edit such a
video clip for sending, see ‘Edit video clips to send’, p. 57.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 82.
Inbox—receive messages
In the Inbox folder,
indicates an unread text message,
an unread multimedia message,
an unread audio
message,
data received through infrared, and
data received through Bluetooth connectivity.
Wednesday, February 7, 2007
10:29 AM
When you receive a message,
and 1 new message
are shown in the standby mode. To open the message,
select Show. To open a message in Inbox, scroll to it, and
press . To reply to a received message, select Options >
Reply
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
When you open a multimedia message ( ), you may see
an image and a message.
is shown if sound is
included, or
if video is included. To play the sound or
the video, select the indicator.
To see the media objects that have been included in the
multimedia message, select Options > Objects.
If the message includes a multimedia presentation,
is
displayed. To play the presentation, select the indicator.
Data and settings
Your device can receive many kinds of messages that
contain data, such as business cards, ringing tones,
operator logos, calendar entries, and e-mail notifications.
You may also receive settings from your service provider
or company information management department in a
configuration message.
Messaging
R1130_en.book Page 79
To save the data from the message, select Options and the
corresponding option.
Web service messages
Web service messages are notifications (for example, news
headlines) and may contain a text message or a link. For
availability and subscription, contact your service
provider.
Mailbox
E-mail settings
Tip! Use Settings wizard to define your mailbox
settings. Press
, and select Tools >Sett. wizard.
To use e-mail, you must have a valid internet access point
(IAP) in the device and define your e-mail settings
correctly. See ‘Access points’, p. 109.
79
Messaging
R1130_en.book Page 80
Wednesday, February 7, 2007
10:29 AM
If you select Mailbox in the Messaging main view and
have not set up your e-mail account, you are prompted to
do so. To start creating the e-mail settings with the
mailbox guide, select Start. See also ‘E-mail’, p. 83.
Retrieve e-mail messages
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and internet
service provider (ISP).
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
1 When you have an open connection to a remote
Open the mailbox
When you open the mailbox, the device asks if you want
to connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection.
To view previously retrieved e-mail messages offline,
select No.
To create a new e-mail message, select New message >
E-mail in the messaging main view or Options > Create
message > E-mail in your mailbox. See ‘Write and send
messages’, p. 77.
80
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
mailbox, select Options > Retrieve e-mail and one of
the following:
New—to retrieve all new messages
Selected—to retrieve only the messages that have been
marked
All—to retrieve all messages from the mailbox
To stop retrieving messages, select Cancel.
2 If you want to close the connection and view the e-mail
messages offline, select Options > Disconnect.
3 To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline, you
are asked if you want to retrieve this message from the
mailbox.
To view e-mail attachments, open the message, and select
the attachment field indicated by
. If the attachment
has a dimmed indicator, it has not been retrieved to the
device; select Options > Retrieve.
Wednesday, February 7, 2007
10:29 AM
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options > Email settings > Automatic retrieval. For more
information, see ‘Automatic retrieval’, p. 84.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Restore.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Disconnect from the mailbox
Delete e-mail messages
View messages on a SIM card
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete message from:, select Phone
only.
Before you can view SIM messages, you must copy them
to a folder in your device.
1 In the Messaging main view, select Options > SIM
messages.
2 Select Options > Mark/Unmark > Mark or Mark all
to mark messages.
3 Select Options > Copy. A list of folders opens.
4 To start copying, select a folder and OK. To view the
messages, open the folder.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete message
from:, select Phone and server.
Messaging
R1130_en.book Page 81
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
81
Messaging
R1130_en.book Page 82
Wednesday, February 7, 2007
10:29 AM
Some or all message centers or access points may be
preset for your device by your service provider, and you
may not be able to change, create, edit, or remove them.
Reply via same centre—Select whether you want the reply
message to be sent using the same text message center
number (network service).
Text messages
Multimedia messages
Press
, and select Messaging > Options > Settings >
Text message and from the following:
Press
, and select Messaging > Options > Settings >
Multimedia message and from the following:
Message centres—View a list of all text message centers
that have been defined.
Image size—Define the size of the image in a multimedia
message.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. If you select Restricted, the
device prevents you from sending messages that may not
be supported. To include content in your messages without
notifications, select Free.
Message centre in use—Select which message center is
used to deliver text messages.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
Message sent as—Contact your service provider to learn
if your message center is able to convert text messages
into these other formats.
Preferred connection—Select the connection to be used.
82
Access point in use—Select which access point is used as
the preferred connection.
Multimedia retrieval—Select how you want to receive
messages. To receive messages automatically in your home
cellular network, select Auto in home netw.. Outside your
home cellular network, you receive a notification that
there is a message to retrieve in the multimedia message
center.
Outside your home cellular network, sending and receiving
multimedia messages may cost you more.
Wednesday, February 7, 2007
10:29 AM
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home cellular network.
Allow anon. msgs.—Select whether you want to reject
messages from an anonymous sender.
Receive adverts—Define whether you want to receive
multimedia message advertisements.
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Deny report sending—Select whether you want to deny
your device sending delivery reports of received messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
E-mail
Press
, and select Messaging > Options > Settings >
E-mail.
To select which mailbox you want to use for sending
e-mail, select Mailbox in use and a mailbox.
Select Mailboxes and a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
To remove a mailbox and its messages from your device,
scroll to it, and press .
Messaging
R1130_en.book Page 83
To create a new mailbox, select Options > New mailbox.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server—Enter the IP address or host name
of the mail server that receives your e-mail.
Access point in use—Select an internet access point (IAP).
See ‘Access points’, p. 109.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting cannot be changed.
83
Messaging
R1130_en.book Page 84
Wednesday, February 7, 2007
10:29 AM
Security (ports)—Select the security option used to
secure the connection to the remote mailbox.
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Port—Define a port for the connection.
Send copy to self—Select whether you want to send a
copy of the e-mail to your own mailbox.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to
you by your service provider.
Outgoing mail server—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your service provider.
Contact your service provider for more information.
The settings for User name, Password, Access point in
use, Security (ports), and Port are similar to the ones in
Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces
your e-mail address in the recipient’s device when the
recipient’s device supports this function.
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to
the mailbox when you select Send message. If you select
84
Include signature—Select whether you want to attach a
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive
the new e-mail indications (a tone, a note, and a mail
indicator) when new mail is received.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Partially (kB) (POP3), or Msgs. &
attachs. (POP3).
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Automatic retrieval
E-mail notifications—To automatically retrieve the
headings to your device when you receive new e-mail in
Wednesday, February 7, 2007
10:29 AM
your remote mailbox, select Auto-update or Only in home
netw..
Options > Settings > Cell broadcast and from the
following:
E-mail retrieval—To automatically retrieve the headings
of new e-mail messages from your remote mailbox at
defined times, select Enabled or Only in home netw..
Define when and how often the messages are retrieved.
Reception—Select whether you want to receive cell
broadcast messages.
E-mail notifications and E-mail retrieval cannot be
active at the same time.
Topic detection—Select whether the device automatically
searches for new topic numbers, and saves the new
numbers without a name to the topic list.
Setting the device to retrieve e-mail automatically may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Web service messages
Press
, and select Messaging > Options > Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press
, and select Messaging >
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Messaging
R1130_en.book Page 85
Other settings
Press
, and select Messaging > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or
e-mail that you send to the Sent folder.
Number of saved msgs.—Define how many sent messages
are saved to the Sent folder at a time. When the limit is
reached, the oldest message is deleted.
Memory in use—If a compatible memory card is inserted
in the device, select the memory where you want to save
your messages: Phone memory or Memory card.
85
Messaging
R1130_en.book Page 86
86
Wednesday, February 7, 2007
10:29 AM
Wednesday, February 7, 2007
10:29 AM
Make calls
Voice calls
1 In the standby mode, enter the phone number,
including the area code. To remove a number, press .
For international calls, press
twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2 Press
to call the number.
3 Press
to end the call (or to cancel the call attempt).
Pressing
always ends a call, even if another
application is active. Closing the slide does not end an
active voice call.
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to Mute, select Unmute first.
To make a call from Contacts, press
, and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press
. Select the call type Voice call.
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 93.
To call a recently dialed number in the standby mode,
press
. Scroll to the number, and press
Make calls
R1130_en.book Page 87
To put an active voice call on hold while answering
another incoming call, select Options > Hold. To switch
between the active and the held call, select Options >
Swap. To connect the active and held calls and drop
yourself from the line, select Options > Transfer.
To send DTMF tone strings (for example, a password),
select Options > Send DTMF. Enter the DTMF string or
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press
repeatedly. Select OK to
send the tone. You can add DTMF tones to the Phone
number or DTMF fields in a contact card.
Tip! When you have only one active voice call, to put
the call on hold, press
. To activate the call, press
again.
During an active call, to route the sound from the handset
to the loudspeaker, select Options > Activate
loudspeaker. If you have attached a compatible headset
with Bluetooth connectivity, to route the sound to the
headset, select Options > Activate handsfree. To switch
back to the handset, select Options > Activate handset.
87
Make calls
R1130_en.book Page 88
Wednesday, February 7, 2007
10:29 AM
To end an active call and replace it by answering the
waiting call, select Options > Replace.
If you have several calls active, to end them all, select
Options > End all calls.
Many of the options that you can use during a voice call
are network services.
Voice mailbox
To call your voice mailbox (network service), press and
hold
in the standby mode. See also ‘Call divert’,
p. 108.
To change the phone number of your voice mailbox, press
, and select Tools > Call mailbox > Options > Change
number. Enter the number (obtained from your wireless
service provider), and select OK.
Make a conference call
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
88
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press
Speed dial a phone number
To activate speed dialing, press
, and select Tools >
Settings > Phone > Call > Speed dialling > On.
To assign a phone number to one of the speed dialing keys
—
), press
, and select Tools > Speed dial. Scroll
to the key to which you want to assign the phone number,
and select Options > Assign.
is reserved for the voice
mailbox, and
for starting the web browser.
To call in the standby mode, press the speed dial key and
Wednesday, February 7, 2007
10:29 AM
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1 To start voice dialing, in the standby mode, press and
hold the right selection key. If a compatible headset
with the headset key is attached, press and hold the
headset key to start voice dialing.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches or Quit to cancel voice
dialing.
Make calls
R1130_en.book Page 89
If several numbers are saved under the name, the device
selects the default number if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (business),
Telephone, Tel. (home), and Tel. (business).
Answer or decline a call
To answer the call, press
, or open the slide.
To mute the ringing tone when a call comes in, select
Silence.
If you do not want to answer a call, press
. If you have
activated the Call divert > If busy function to divert calls,
declining an incoming call also diverts the call. See ‘Call
divert’, p. 108.
89
Make calls
R1130_en.book Page 90
Wednesday, February 7, 2007
10:29 AM
When you select Silence to mute the ringing tone of the
incoming call, you can send a text message without
rejecting the call informing the caller that you cannot
answer the call. Select Options > Send text message. To
set up this option and write a standard text message, see
‘Call’, p. 107.
Call waiting
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Phone > Call > Call waiting (network service).
To answer the waiting call, press
on hold.
90
. The first call is put
functions, the device is switched on, and within the
network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call duration
To monitor the approximate duration of your incoming and
outgoing calls, press
, and select Applications >
Log > Call duration.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press
. To end both
calls, select Options > End all calls.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ‘Phone and
SIM card’, p. 104.
Log
Packet data
To monitor the phone numbers of missed, received, and
dialed voice calls, press
, and select Applications >
Log > Recent calls. The device registers missed and
received calls only if the network supports these
To check the amount of data sent and received during
packet data connections, press
, and select
Applications > Log > Packet data. For example, you may
be charged for your packet data connections by the
amount of data sent and received.
Wednesday, February 7, 2007
10:29 AM
Monitor all communication events
Icons in Log are as follows:
Incoming
Outgoing
Missed communication events
To monitor all voice calls, text messages, or data
connections registered by the device, press
, select
Applications > Log, and press
to open the general log.
Tip! In the details view, you can copy a phone number
to the clipboard, and paste it to a text message, for
example. SelectOptions > Copy number.
To view from the packet data counter how much data is
transferred and how long a certain packet data
connection lasts, scroll to an incoming or outgoing event
indicated by Pack., and select Options > View details.
Make calls
R1130_en.book Page 91
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or web pages are shown as
packet data connections.
To add an unknown phone number from Log to your
contacts, select Options > Save to Contacts.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
from the log, press .
To set the log duration, select Options > Settings > Log
duration. If you select No log, all the log contents, recent
calls register, and messaging delivery reports are
permanently deleted.
91
Contacts (Phonebook)
R1130_en.book Page 92
Wednesday, February 7, 2007
10:29 AM
Contacts (Phonebook)
Press
, and select Contacts. In Contacts you can save
and update contact information, such as phone numbers,
home addresses, or e-mail addresses of your contacts. You
can add a personal ringing tone or a thumbnail image to
a contact card. You can also create contact groups, which
allow you to send text messages or e-mail to many
recipients at the same time. You can add received contact
information (business cards) to contacts. See ‘Data and
settings’, p. 79. Contact information can only be sent to or
received from compatible devices.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Contacts info.
Save and edit names and
numbers
1 Select Options > New contact.
2 Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit. You can
also search for the desired contact by entering the first
letters of the name to the search field. A list of the
contacts starting with the letters appear on the display.
92
Tip! To add and edit contact cards, you can also use
Nokia Contacts Editor available in Nokia PC Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
To listen to the voice tag assigned to the contact, select a
contact card and Options > Play voice tag. See ‘Voice
dialing’, p. 89.
To send contact information, select the card you want to
send and Options > Send > Via text message, Via
multimedia, Via Bluetooth, or Via infrared. See
‘Messaging’, p. 76 and ‘Send data using Bluetooth
connectivity’, p. 26.
Tip! To print contact cards on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To add a contact to a group, select Options > Add to
group: (shown only if you have created a group). See
‘Create contact groups’, p. 94.
To check to which groups a contact belongs, select the
contact and Options > Belongs to groups.
Wednesday, February 7, 2007
10:29 AM
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press
and
to mark the contacts, and press to
delete.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In the address book, select a contact.
2 Select Options > Defaults.
3 Select a default to which you want to add a number or
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press
, and select Contacts > Options > SIM
contacts > SIM directory, the names you want to copy
and Options > Copy to Contacts.
To copy contacts to your SIM card, in Contacts, select the
names you want to copy and Options > Copy to SIM
directory, or Options > Copy > To SIM directory. Only
the contact card fields supported by your SIM card are
copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
SIM directory and other SIM services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider or other vendor.
Contacts (Phonebook)
R1130_en.book Page 93
Press
, and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dial contacts. This setting is only
shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options > Activate fixed dialling. You
need your PIN2 code to activate and deactivate fixed
dialing or edit your fixed dialing contacts. Contact your
service provider if you do not have the code. To add new
numbers to the fixed dialing list, select Options > New
SIM contact. You need the PIN2 code for these functions.
93
Contacts (Phonebook)
R1130_en.book Page 94
Wednesday, February 7, 2007
10:29 AM
When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
To define a ringing tone for a contact or a contact group,
do the following:
1 Press to open a contact card or go to the groups
list, and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3 Select the ringing tone you want to use for the
individual contact or the selected group. You can also
use a video clip as a ringing tone.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes
it).
To remove the ringing tone, select Default tone from the
list of ringing tones.
94
Create contact groups
1 In Contacts, press
to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name
Group, and select OK.
4 Select the group, and Options > Add members.
5 Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1 In the groups list, select the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group.
3 Select Yes to remove the contact from the group.
R1130_en.book Page 95
Wednesday, February 7, 2007
10:29 AM
Quickoffice
With Quickoffice, you can view .doc, .xls, .ppt, and .txt
documents. All file formats or features are not supported.
Apple Macintosh is not supported.
To use the Quickoffice applications, press
, and select
Office > Quickoffice. A list of files in the .doc, .xls, .ppt,
and .txt file formats saved on your device and on a
compatible memory card (if inserted) opens.
To open Quickword, Quicksheet, Quickpoint, or
Quickmanager, press
to reach the desired view.
Quickword
With Quickword, you can view native Microsoft Word
documents with your device.
Quickword supports the viewing of documents saved in
.doc and .txt formats created with Microsoft Word 97,
2000, XP, and 2003. Not all variations or features of the
mentioned file formats are supported.
To open a document, press
, and select Office >
Quickoffice > Quickword and the document.
To upgrade to a version of Quickword that supports
Office
Office
editing, select Options > Upgrade to edit. The upgrade is
chargeable.
See also ‘More information’, p. 96.
Quicksheet
With Quicksheet, you can view native Microsoft Excel
files with your device.
Quicksheet supports the viewing of spreadsheet files
saved in .xls format created with Microsoft Excel 97, 2000,
XP, or 2003. Not all variations or features of the
mentioned file formats are supported.
To open a spreadsheet, press
, and select Office >
Quickoffice > Quicksheet and the spreadsheet.
To upgrade to a version of Quicksheet that supports
editing, select Options > Upgrade to edit. The upgrade is
chargeable.
See also ‘More information’, p. 96.
Quickpoint
With Quickpoint, you can view native Microsoft
PowerPoint presentations with your device.
95
Office
R1130_en.book Page 96
Wednesday, February 7, 2007
10:29 AM
Quickpoint supports the viewing of presentations saved
in .ppt format created with Microsoft PowerPoint 2000,
XP, and 2003. Not all variations or features of the
mentioned file formats are supported.
To open a presentation, press
, and select Office >
Quickoffice > Quickpoint and the presentation.
To upgrade to a version of Quickpoint that supports
editing, select Options > Upgrade to edit. The upgrade is
chargeable.
See also ‘More information’, p. 96.
Quickmanager
With Quickmanager, you can download software,
including updates, upgrades, and other useful
applications. You can pay for the downloads by phone bill
or credit card.
To upgrade your Quickword, Quicksheet, or Quickpoint to
a version that supports editing, you need to buy a license.
To open Quickmanager, press
Quickoffice > Quickmanager.
, and select Office >
More information
If you experience problems with Quickword, Quicksheet,
Quickpoint, or Quickmanager, visit
www.quickoffice.com for more information. Support is
96
also available by sending an e-mail to
supportS60@quickoffice.com.
Notes
To write notes in .txt format, press
Notes.
, and select Office >
Recorder
To record voice memos, press
, and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone every
5 seconds during recording.
Adobe Reader
With Adobe Reader, you can read .pdf documents on the
display of your device.
This application has been optimized for .pdf document
content on handsets and other mobile devices, and
provides only a limited set of features compared with PC
versions.
To open documents, press
, and select Office > Adobe
PDF. Your recent files are listed in the file view. To open a
document, scroll to it, and press .
Wednesday, February 7, 2007
10:29 AM
Use File mgr. to browse and open documents stored in the
device memory and on a compatible memory card (if
inserted).
More information
To share questions, suggestions, and information about the
application, visit the Adobe Reader for Symbian OS user
forum at http://adobe.com/support/forums/main.html.
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must
select a base currency and add exchange rates. The rate of
the base currency is always 1.
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Calculator
, and select Office > Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Zip manager
Converter
To convert measures from one unit to another, press
and select Office > Converter.
convert. The other Amount field changes
automatically to show the converted value.
Set base currency and exchange rates
For more information, visit www.adobe.com.
Press
which you want to convert.
3 In the first Amount field, enter the value you want to
Office
R1130_en.book Page 97
Converter has limited accuracy, and rounding errors may
occur.
1 In the Type field, select the measure you want to use.
2 In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
Use the Zip manager application to compress files.
Compressed files use less memory and are more
convenient to send to compatible devices.
To open the application, press
Zip.
, and select Office >
To create or manage archives or to change the settings,
select Options and the desired option.
You can store archive files on the device or on a
compatible memory card.
97
Tools
R1130_en.book Page 98
Wednesday, February 7, 2007
10:29 AM
Tools
Application manager
Install applications and software
Press
, and select Tools > App. mgr.. You can install
two types of applications and software to your device:
• J2METM applications based on JavaTM technology with
the extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia N95. Software
providers will often refer to the official model number
of this product: the Nokia N95-5.
indicates a .sis application,
a Java application,
that the application is not fully installed, and
that the
application is installed on the memory card.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a compatible memory card (local disk).
98
Important: Only install and use applications and
other software from trusted sources, such as applications
that are Symbian Signed or have passed the Java
VerifiedTM testing.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, in Certificates, select View details. See
‘Certificate management’, p. 105.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
Wednesday, February 7, 2007
10:29 AM
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1 To locate an installation file, press
, and select
Tools > App. mgr.. Alternatively, search the device
memory or a compatible memory card (if inserted) in
File mgr., or open a message in Messaging > Inbox
that contains an installation file.
2 In App. mgr., select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press . If the application does not have a default folder
defined, it is installed in the Applications folder.
To see which software packages are installed or removed
and when, select Options > View log.
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
Tools
R1130_en.book Page 99
After you install applications to a compatible memory
card, installation files (.sis) remain in the device memory.
The files may use large amounts of memory and prevent
you from storing other files. To maintain sufficient
memory, use Nokia PC Suite to back up installation files to
a compatible PC, then use the file manager to remove the
installation files from the device memory. See ‘File
manager’, p. 17. If the .sis file is a message attachment,
delete the message from the Messaging inbox.
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if you
have the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
If another software package depends on the software
package that you removed, the other software package
may stop working. Refer to the documentation of the
installed software package for details.
99
Tools
R1130_en.book Page 100
Wednesday, February 7, 2007
10:29 AM
Settings
Select Options > Settings and from the following:
Software installation—Select whether Symbian software
that has no verified digital signature can be installed.
Online certificate check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a message to be sent
or a network connection to a specific access point for
downloading extra data or components. In the App. mgr.
main view, scroll to an application, and select Options >
Open to change settings related to that specific
application.
Digital rights management
Content owners may use different types of digital rights
management (DRM) technologies to protect their
intellectual property, including copyrights. This device
uses various types of DRM software to access
DRM-protected content. With this device you can access
content protected with WMDRM 10, OMA DRM 1.0, and
OMA DRM 2.0. If certain DRM software fails to protect the
content, content owners may ask that such DRM
100
software's ability to access new DRM-protected content
be revoked. Revocation may also prevent renewal of such
DRM-protected content already in your device. Revocation
of such DRM software does not affect the use of content
protected with other types of DRM or the use of non-DRMprotected content.
Digital rights management (DRM) protected content
comes with an associated activation key that defines your
rights to use the content.
If your device has OMA DRM protected content, to back up
both the activation keys and the content, use the backup
feature of Nokia PC Suite. Other transfer methods may not
transfer the activation keys which need to be restored with
the content for you to be able to continue the use of OMA
DRM protected content after the device memory is
formatted. You may also need to restore the activation
keys in case the files on your device get corrupted.
If your device has WMDRM protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation keys
and the content in case the files on your device get
corrupted. Losing the activation keys or the content may
limit your ability to use the same content on your device
again. For more information, contact your service provider.
Wednesday, February 7, 2007
10:29 AM
Some activation keys may be connected to a specific SIM
card, and the protected content can be accessed only if the
SIM card is inserted in the device.
To view the digital rights activation keys stored in your
device, press
, and select Tools > Actv. keys and from
the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Not in use—View keys that have no media files connected
to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Get new key. Activation keys cannot be updated if web
service message reception is disabled. See ‘Web service
messages’, p. 79.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 89.
Tools
R1130_en.book Page 101
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice comm.
application and its Profiles folder. Press
, and select
Tools > Voice comm. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold
in the standby mode,
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesiser > Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Remove voice adapts..
101
Settings
R1130_en.book Page 102
Wednesday, February 7, 2007
10:29 AM
Settings
To change settings, press
, and select Tools > Settings.
Scroll to General, Phone, Connection, or Applications,
and press . Scroll to a setting or setting group you want
to change, and press .
Voice comms. opens the settings for the Voice comm.
application. See ‘Voice commands’, p. 101.
Some settings may be preset for the device by your service
provider, and you may not be able to change them.
Display
General
Light sensor—Press
or
to adjust the light sensor
that observes the lighting conditions and adjusts the
brightness of the display. The light sensor may cause the
display to flicker in low light.
To edit the general settings of your device or restore the
original default device settings, press
, and select
Tools > Settings > General > Personalisation, Date and
time, Enhancement, Security, Factory settings, or
Positioning.
For Date and time, see ‘Clock’, p. 73.
Personalisation
To edit settings related to the display, standby mode, and
general functionality of your device, press
, and select
Tools > Settings > General > Personalisation.
Tones allows you to change the tones of calendar, clock,
and the currently active profile.
102
Themes opens the Themes application. See ‘Change the
look of your device’, p. 71.
Font size—Adjust the size of the text and icons on the
display.
Power saver time-out—Select the time-out period after
which the power saver is activated.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Wednesday, February 7, 2007
10:29 AM
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 71.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
Shortcuts > Left selection key and Right selection key—
Assign a shortcut to the selection keys in the standby
mode.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Language
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text.
Settings
R1130_en.book Page 103
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Enhancement
For enhancement indicators, see ‘Essential indicators’, p.
13. Some enhancement connectors do not indicate which
type of an enhancement is connected to the device.
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
Default profile—Set the profile that you want activated
each time you connect a certain compatible enhancement
to your device. See ‘Profiles—set tones’, p. 69.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to Beep once or Silent, automatic
answer is disabled.
103
Settings
R1130_en.book Page 104
Wednesday, February 7, 2007
10:29 AM
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
To change the settings for a TV out connection, select TVOut and from the following:
Default profile—Set the profile that you want activated
each time you connect a Nokia Video Connectivity Cable
to your device.
TV screen size—Select the aspect ratio of the TV: Normal
or Widescreen for widescreen TVs.
Tv system—Select the analog video signal system that is
compatible with your TV.
Flicker filter—To improve image quality on the screen of
your TV, select On. The flicker filter may not diminish
image flicker on all TV screens.
Security
To edit settings related to the security, press
, and
select Tools > Settings > General > Security > Phone
and SIM card, Certificate management, or Security
module.
Phone and SIM card
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
104
personal identification number (PIN) code request may not
be allowed by some SIM cards.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 105.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Keypad autolock period—Select whether the keypad is
locked when your device has been idle for a certain period
of time.
Phone autolock period—To avoid unauthorized use, you
can set a time-out after which the device automatically
locks. A locked device cannot be used until the correct lock
code is entered. To turn off the autolock period, select
None.
See ‘Glossary of PIN and lock codes’, p. 105.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
commands opens. Select Lock phone.
. A list of
Lock keys if slide closed—Select whether the keypad is
locked when you close the 2-way slide.
Wednesday, February 7, 2007
10:29 AM
Tip! To lock or unlock the keypad manually, press
then
Lock if SIM card changed—You can set the device to ask
for the lock code when an unknown SIM card is inserted
into your device. The device maintains a list of SIM cards
that are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your device, change
the lock code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Settings
R1130_en.book Page 105
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card
is in your device.
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press
to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
105
Settings
R1130_en.book Page 106
Wednesday, February 7, 2007
10:29 AM
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
"Expired certificate" or "Certificate not valid yet" is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
View certificate details—check authenticity
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is
checked, and one of the following notes may be displayed:
106
• Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the trust
settings’, p. 106.
• Expired certificate—The period of validity has ended
for the selected certificate.
• Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
• Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
• Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
• Internet: Yes—The certificate is able to certify servers.
• App. installation: Yes—The certificate is able to certify
the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
Wednesday, February 7, 2007
10:29 AM
Security module
Phone
To view or edit a security module (if available) in Security
module, scroll to it, and press the scroll key. To view
detailed information about a security module, scroll to it,
and select Options > Security details.
To edit the settings related to making and receiving calls,
press
, and select Tools > Settings > Phone > Call,
Call divert, Call barring, or Network.
Factory settings
To reset some of the settings to their original values, select
Factory settings. To do this, you need the lock code. See
‘Phone and SIM card’, p. 104. After resetting, the device
may take a longer time to power on. Documents and files
are unaffected.
Positioning
Positioning methods—Select the positioning methods
used to detect the location of your device: the internal GPS
receiver of your device, Bluetooth GPS to use a compatible
external GPS receiver with Bluetooth connectivity, and
Network based to use information from the cellular
network (network service). The location information can be
used by compatible applications in your device.
Settings
R1130_en.book Page 107
Call
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your service
provider when you make a subscription (Set by network)
(network service).
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 89.
Message text—Write a text to be sent in a text message
when you reject a call.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press
107
Settings
R1130_en.book Page 108
Wednesday, February 7, 2007
10:29 AM
Show call duration—Activate this setting if you want the
length of a call to be displayed during the call.
Speed dialling—Select On, and the numbers assigned to
the speed dialing keys (
) can be dialed by
pressing and holding the key. See also ‘Speed dial a phone
number’, p. 88.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, and
Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
Select which calls you want to divert and the desired
diverting option. To divert voice calls when your number is
busy or when you reject incoming calls, select If busy. Set
the option on (Activate) or off (Cancel), or check whether
the option is activated (Check status).
Line in use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Several diverting options can be active at the same time.
When all calls are diverted,
is shown in the
standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
108
Call divert
Call barring and call diverting cannot be active at the same
time.
Call barring
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
Wednesday, February 7, 2007
10:29 AM
Call barring and call diverting cannot be active at the same
time.
Bluetooth, USB, Access points, Packet data,
Configurations, or Access point name control.
When calls are barred, calls may be possible to certain
official emergency numbers.
For Bluetooth connectivity settings, see ‘Settings’, p. 26.
For USB data cable settings, see ‘USB’, p. 29.
Network
Data connections and access points
Operator selection—Select Automatic to set the device to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home cellular network.
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in a GSM network, multiple data connections
can be active at the same time, and access points can
share a data connection.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Internet access point (IAP) to send and receive e-mail
and connect to the internet
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your service provider.
Connection
Access points
To edit access point and other connection settings, press
, and select Tools > Settings > Connection >
You may receive access point settings in a message from
a service provider. See ‘Data and settings’, p. 79. Some or
Settings
R1130_en.book Page 109
109
Settings
R1130_en.book Page 110
Wednesday, February 7, 2007
10:29 AM
all access points may be preset for your device by your
service provider, and you may not be able to change,
create, edit, or remove them.
indicates a protected
access point.
indicates a packet data access point.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
To create a new access point, select Options > New
access point.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
To edit the settings of an access point, select Options >
Edit. Follow the instructions from your service provider.
Authentication—Select Normal or Secure.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can
be left empty, unless you have been instructed otherwise
by your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your service provider.
110
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Homepage—Depending on the access point you are setting
up, enter the web address or the address of the multimedia
messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the internet protocol type to use:
IPv4 or IPv6. The other settings depend on the selected
network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary DNS address, enter the IP
address of the primary DNS server. In Secondary DNS
address, enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Wednesday, February 7, 2007
10:29 AM
Proxy server address—Define the address for the proxy
server.
Access point name control
Proxy port number—Enter the proxy port number.
With Access point name control service, you can restrict
packet data connections and allow your device to use only
certain packet data access points.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data connection—If you select When available
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker. If there is no packet data
coverage, the device periodically tries to establish a packet
data connection. If you select When needed, the device
uses a packet data connection only if you start an
application or action that needs it.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
Settings
R1130_en.book Page 111
This setting is only available if your SIM card supports the
access point control service.
To set the control service on or off or to change the
allowed access points, select Options and the
corresponding option. To change the options, you need
your PIN2 code. Contact your service provider for the code.
Applications
To edit the settings of some of the applications in your
device, press
, and select Tools > Settings >
Applications. The settings are also available in each
application by selecting the settings option.
Configurations
You may receive trusted server settings from your service
provider in a configuration message. You can save view or
delete these settings in Configurations.
111
Troubleshooting: Q&A
R1130_en.book Page 112
Wednesday, February 7, 2007
10:29 AM
Troubleshooting: Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your wireless service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP) or wireless service provider.
Application not responding
Q: How do I close an application that is not responding?
A: Press and hold
. Scroll to the application, and press
to close the application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices are compatible, have activated
Bluetooth connectivity, and are not in hidden mode. Check
also that the distance between the two devices is not over
10 meters (33 feet) and that there are no walls or other
obstructions between the devices.
Q: Why can’t I end a Bluetooth connection?
112
A: If another device is connected to your device, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Tools >
Bluetooth > Bluetooth > Off.
Camera
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows are clean.
Display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Memory low
Q: What can I do if my device memory is low?
A: You can delete unused items saved in your device regularly
to avoid memory getting low. See ‘Memory low—free
memory’, p. 17.
To delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are
deleting multiple items and one of the following notes are
shown: Not enough memory to perform operation.
Delete some data first. or Memory low. Delete some
Wednesday, February 7, 2007
10:29 AM
data from phone memory., try deleting items one by one
(starting from the smallest item).
To view what kind of data you have and how much memory
the different data groups consume, press
, and select
Tools > File manager > Options > Memory details.
numbers or addresses. Press
, and select Messaging >
Options > Settings > Multimedia msg..
Q: How can I end the data connection when the device starts
a data connection again and again?
• Use Nokia PC Suite to make a backup copy of all data to a
compatible computer.
• Send images to your e-mail address, then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
A: To stop the device from making a data connection, press
, and select Messaging > Options > Settings >
Multimedia message > Multimedia retrieval and one of
the following:
Manual—to have the multimedia messaging center save
messages to be retrieved later. You receive a notification
when there is a new multimedia message that you can
retrieve in the multimedia message center.
Off—to ignore all incoming multimedia messages. After
this change, the device does not make any network
connections related to multimedia messaging.
Messaging
PC connectivity
Q: Why can’t I select a contact?
Q: Why do I have problems in connecting the device to my PC?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the contact
card in Contacts.
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the user guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
Multimedia messaging
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
Troubleshooting: Q&A
R1130_en.book Page 113
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming
fax calls to another phone number.
113
Battery information
R1130_en.book Page 114
Wednesday, February 7, 2007
10:29 AM
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The battery
can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
114
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact with
the skin or eyes. In the event of such a leak, flush your skin or
eyes immediately with water, or seek medical help.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it from
Wednesday, February 7, 2007
10:29 AM
an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
When looking at the hologram on
the label, you should see the Nokia
connecting hands symbol from
one angle and the Nokia Original
Enhancements logo when looking
from another angle.
2 When you angle the hologram
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
3 Scratch the side of the label to
reveal a 20-digit code, for
example,
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed
by the bottom row.
4 Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
Battery information
R1130_en.book Page 115
To create a text message, enter the
20-digit code, for example, 12345678919876543210, and
send to +44 7786 200276.
To create a text message,
• For countries in Asia Pacific, excluding India: Enter the
20-digit code, for example, 12345678919876543210, and
send to +61 427151515.
• For India only: Enter Battery followed by the 20-digit
battery code, for example, Battery
12345678919876543210, and send to 5555.
National and international operator charges will apply.
115
Battery information
R1130_en.book Page 116
Wednesday, February 7, 2007
You should receive a message indicating whether the code
can be authenticated.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
116
10:29 AM
Wednesday, February 7, 2007
10:29 AM
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The following suggestions
will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed
in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes.
• To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working
properly, take it to the nearest authorized service facility for
service.
Care and maintenance
R1130_en.book Page 117
117
Additional safety information
R1130_en.book Page 118
Wednesday, February 7, 2007
10:29 AM
Additional safety information
Small children
Medical devices
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Operating environment
This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at
least 1.5 centimeters away from the body. When a carry case,
belt clip, or holder is used for body-worn operation, it should
not contain metal and should position the device the abovestated distance from your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is
completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 15.3 centimeters (6 inches) be
maintained between a wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research. Persons with pacemakers should do the following:
• Always keep the device more than 15.3 centimeters (6
inches) from the pacemaker.
• Do not carry the device in a breast pocket.
• Hold the device to the ear opposite the pacemaker to
minimize the potential for interference.
If you suspect interference, switch off your device, and move
the device away.
118
Wednesday, February 7, 2007
10:29 AM
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative, of your vehicle or any equipment that has
been added.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or
metal powders.
Additional safety information
R1130_en.book Page 119
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of
this, connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device for
essential communications like medical emergencies.
119
Additional safety information
Complete_Safety.fm
Page 120
Wednesday, March 28, 2007 2:29 PM
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2 Press the end key as many times as needed to clear the
display and ready the device for calls.
3 Enter the official emergency number for your present
location. Emergency numbers vary by location.
4 Press the call key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. If the
device is in the offline or flight profile mode, you may need to
change the profile to activate the phone function before you
can make an emergency call. Consult this guide or your
service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio
waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
120
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 0.62 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements
for exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this
standard during product certification for use at the ear is 0.49
W/kg and when properly worn on the body is 0.67 W/kg.
Information about this device model can be found at http://
www.fcc.gov/oet/fccid by searching the equipment
authorization system using FCC ID: PDNRM-245.
R1130_en.book Page 121
Wednesday, February 7, 2007
10:29 AM
Index
access points 109
activation keys
See digital rights management
active standby mode 71
additional applications 10
Adobe reader 96
alarm clock 73
application manager 98
applications
installing 98
Java 98
removing 99
backing up data 17
batteries
authenticating 114
charging 114
intended for use 9
Bluetooth 25
device address 27
pairing 27
security 26
sending data 26
switching off 26
bookmarks 19
cache, clearing 23
calculator 97
calendar
creating entries 73
synchronizing Nokia PC Suite 74
call log
See log
calls
answering 89
barring 108
declining 89
diverting 108
duration 90
international 87
making 87
missed 90
received 90
settings 107
transferring 90
waiting 90
camera
active toolbar 44
adjusting lighting and color 47
editing videos 56
flash 46
image setup settings 47
saving video clips 49
scenes 47
self-timer 48
sequence mode 48
shooting video 49
still image camera settings 46
taking pictures 43
video recorder settings 50
cell broadcast 85
certificates 105
chargers 9
clock 73
codes 105
computer connections 29
conference call 88
connection settings 109
contact cards 92
inserting pictures 92
sending 92
contact information 10
121
R1130_en.book Page 122
Wednesday, February 7, 2007
converter 97
copying contacts between the SIM card
and device memory 93
copyright protection
See digital rights management
deleting messages 81
opening 80
remote mailbox 79
retrieving from mailbox 80
saving 85
sending 77
settings 83
viewing attachments 80
writing 77
data cable 29
data connections
details 25
ending 25
establishing 109
indicators 13
network 8, 109
settings
date 73
delivery reports 83
device manager 30
digital rights management 100
Download! 18
DRM
See digital rights management
editing images 55
editing videos 56
e-mail
automatic retrieving 81
deleting mailbox 83
122
10:29 AM
file formats
.jad 98
.jar 98, 99
.sis 98
music player 31
RealPlayer 39
file manager 17
fixed dialing 93
FM radio 35
gallery
active toolbar 53
editing images 55
free memory 55
images and videos 52
ordering files in albums 54, 62
presentations 59
print basket 54
printing images 59
slide show 58
TV out mode 58
GPRS
See data connections
GPS
GPS connection 63
maps 64
positioning 63
hands-free operation
See loudspeaker
headset 15
help application 10
idle sceen
See standby mode
images
See gallery
indicators 13
infrared connection 28
installing applications 98
internet
See web
internet access points (IAP)
See access points
R1130_en.book Page 123
Wednesday, February 7, 2007
internet videos 37
Java 98
keyguard 15, 104
keypad lock 15, 104
language settings 103
lock code 105
log
duration 91
erasing contents 91
filtering 91
loudspeaker 14
mailbox 79
maintenance 117
maps
browsing maps 64
planning a route 65
searching for locations 65
memory
freeing memory 17, 55, 90
viewing memory consumption 17
memory card
ejecting 16
inserting 16
10:29 AM
memory card tool 17
menu, rearranging 69
messaging
cell broadcast 85
e-mail 77
inbox 78
mailbox 79
multimedia messages 77
settings 81
text messages 77
microSD card 15
missed calls 90
MMS
See multimedia messages
modem 30
movies, muvees
custom muvees 60
quick muvees 60
multimedia menu 14
multimedia messages
creating 77
receiving 78
retrieving 79
saving 85
sending 77
settings 82
music
See music player
music player
downloading music 33
file formats 31
music shop 33
playing songs 31
playlists 32
transferring music 33
Nokia Lifeblog 40
notes 96
office applications 95
packet data settings 111
PC connections 29
pdf files 96
personalization 71
phone language 103
phonebook
See contact cards
PIN codes 105
positioning 63
power saver 102
printing
contact cards 92
images 59
profiles 69
123
R1130_en.book Page 124
Wednesday, February 7, 2007
PUK codes 105
Quickoffice 95
radio 35
RealPlayer 39
recent calls 90
recorder 96
remote mailbox 79, 80
remote SIM mode 28
ringing tones
3-D 70
personal ringing tone 94
See also profiles
safety
additional information 118
emergency calls 119
guidelines 7
scenes
image scenes 48
video scenes 48
security code
See lock code
sending
contact cards, business cards 92
messages 77
124
10:29 AM
video clips 57
service commands 76
settings
access points 109
application 102
Bluetooth connectivity 26
call barring 108
call diverting 108
certificates 105
data connections 109
defining 11
display 102
e-mail 79, 83
keypad lock 104
language 103
lock code 105
messaging 81
multimedia messages 82
original settings 107
personalizing the phone 69
PIN code 105
power saver 102
text messages 82
TV out 104
SIM card
copying names and numbers to
your device 93
messages 81
names and numbers 93
using device without a SIM card 70
sis file 98
SMS
See text messages
snooze 73
software
installing applications 98
removing applications 99
transferring a file to your device 98
software update 11
songs
file formats 31
transferring 33
sound clips 52
sounds
adjusting volume 13
muting a ringing tone 89
recording sounds 96
speaker phone
See loudspeaker
speed dialing 88
standby mode 69
support information 10
svg files 59
synchronization 30
text messages
R1130_en.book Page 125
Wednesday, February 7, 2007
inbox 76
receiving 78
saving 85
sending 77, 78
settings 82
writing 78
themes 71
time 73
tones
See ringing tones
transferring content from another
device 11
transferring music 33
troubleshooting 112
TV out
settings 104
viewing captured media files on TV
58
unsupported file format 57
USB data cable 29
USSD commands 76
video clips 52
video on demand 37
video player
See RealPlayer
10:29 AM
videos
See gallery
Visual Radio 35
voice commands 101
voice dialing 89
voice mailbox 88
changing the phone number 88
diverting calls to voice mailbox 108
voice messages 88
voice tags 101
making calls 89
volume control
adjusting volume 13
during a call 87
loudspeaker 14
wallpapers
changing 71
using pictures 46, 53
web
access points, See access points
blogs 23
browser 19
feeds 23
service messages 79
weblog 40
writing language 103
125

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
About                           : uuid:6d325922-3f83-4408-bef3-b9015fb7a441
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:04:11 10:43:20+03:00
Create Date                     : 2007:02:07 10:35:57+08:00
Metadata Date                   : 2007:04:11 10:43:20+03:00
Document ID                     : uuid:445288be-c91c-44aa-96ad-6f0e7bdedbbd
Instance ID                     : uuid:4c14678d-bd93-42a5-a861-6940f2be4eb8
Format                          : application/pdf
Title                           : R1130_en.book
Creator                         : Lisa
Has XFA                         : No
Page Count                      : 65
Author                          : Lisa

EXIF Metadata provided by EXIF.tools