Microsoft RM-270 GSM850/900/1800/1900 WCDMA850 Cellular Phone w/BT User Manual
Microsoft Mobile Oy GSM850/900/1800/1900 WCDMA850 Cellular Phone w/BT
Manual
Nokia 3555 User Guide
FCC Draft
Model 3555
26 July 2007
2
Issue 1, Part No. 9201640
Copyright © 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Visual Radio, and NaviTM are trademarks or registered trademarks of
Nokia Corporation. Other product and company names mentioned herein may be trademarks or
tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation.
Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form
without the prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2007. Tegic
Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance with the
MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use
in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be
implied for any other use. Additional information including that relating to promotional, internal and
commercial uses may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA
OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW,
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may vary by region.
Please check with your Nokia dealer for details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
FCC Draft
Model 3555
26 July 2007
3
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such
interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly
approved by Nokia could void the user's authority to operate this equipment.
FCC Draft
Model 3555
26 July 2007
4
Contents
For your safety ..................................................................................................... 5
General information ............................................................................................ 8
1. Get started........................................................................................................ 9
2. Your device ..................................................................................................... 15
3. Call functions ................................................................................................. 20
4. Write text ....................................................................................................... 22
5. Messaging....................................................................................................... 24
6. Contacts.......................................................................................................... 36
7. Log .................................................................................................................. 39
8. Settings........................................................................................................... 39
9. Gallery............................................................................................................. 49
10.Media............................................................................................................. 51
11.Organizer....................................................................................................... 55
12.Push to talk................................................................................................... 58
13.Applications .................................................................................................. 63
14.SIM services .................................................................................................. 64
15.Web................................................................................................................ 64
16.PC connectivity............................................................................................. 70
17.Battery information...................................................................................... 71
Care and maintenance....................................................................................... 73
Additional safety information .......................................................................... 74
Index ................................................................................................................... 78
FCC Draft
Model 3555
26 July 2007
5
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless device use is prohibited or when it
may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the device at a refuelling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation. Do
not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important
information stored in your device.
FCC Draft
Model 3555
26 July 2007
6
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety
instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the device is switched on and in service. Press the end key as many times
as needed to clear the display and return to the start screen. Enter the
emergency number, then press the call key. Give your location. Do not end the
call until given permission to do so.
■About your device
The wireless device described in this guide is approved for use on the WCDMA 850 and 2100,
and GSM 850, 900, 1800, and 1900 networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect local customs, privacy and
legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing tones), and other
content from being copied, modified, transferred, or forwarded.
Warning: To use any features in this device, other than the alarm clock, the device
must be switched on. Do not switch the device on when wireless device use may
cause interference or danger.
■Network services
To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all networks;
other networks may require that you make specific arrangements with your service provider
before you can use the network services. Your service provider can give you instructions and
explain what charges will apply. Some networks may have limitations that affect how you
can use network services. For instance, some networks may not support all language-
dependent characters and services.
Your service provider may have requested that certain features be disabled or not activated
in your device. If so, these features will not appear on your device menu. Your device may
also have a special configuration such as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as multimedia messaging (MMS), browsing, e-mail application,
instant messaging, presence enhanced contacts, remote synchronization, and content
downloading using the browser or MMS require network support for these technologies.
■Shared memory
The following features in this device may share memory: gallery, contacts, text messages,
multimedia messages, and instant messages, e-mail, calendar, to-do notes, JavaTM games
FCC Draft
Model 3555
26 July 2007
7
and applications, and note application. Use of one or more of these features may reduce the
memory available for the remaining features sharing memory. For example, saving many
Java applications may use all of the available memory. Your device may display a message
that the memory is full when you try to use a shared memory feature. In this case, delete
some of the information or entries stored in the shared memory features before continuing.
■Enhancements
A few practical rules about accessories and enhancements
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp and pull
the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and are operating
properly.
• Installation of any complex car enhancements must be made by qualified personnel only.
FCC Draft
Model 3555
26 July 2007
8
General information
■Overview of functions
Your phone provides many functions that are practical for daily use, such as text
and multimedia messaging, calendar, clock, alarm clock, music player, and built-in
camera. Your phone also supports the following functions:
• Plug and play online service to get the configuration settings. See Plug and
play service p. 13 and Configuration settings service p. 8.
• Active standby. See Active standby p. 17.
• Audio messaging. See Nokia Xpress audio messaging p. 26.
• Instant messaging. See Instant messaging p. 29.
• E-mail application. See E-mail application p. 27.
• Enhanced voice dialing. See Enhanced voice dialing p. 21 and Voice
commands p. 41.
• Java 2 Platform, Micro Edition (J2METM). See Applications p. 62.
■Configuration settings service
To use some of the network services, such as mobile Internet services, MMS, Nokia
Xpress audio messaging, or remote Internet server synchronization, your phone
needs the correct configuration settings. For more information on availability,
contact your network operator, service provider, nearest authorized Nokia dealer,
or visit the support area on the Nokia Web site, www.nokia.com/support.
When you have received the settings as a configuration message, and the settings
are not automatically saved and activated, Configuration sett. received is
displayed.
To save the settings, select Show > Save. If required, enter the PIN code supplied
by the service provider.
To discard the received settings, select Exit or Show > Discard.
■Download content
You may be able to download new content (for example, themes) to the phone
(network service).
For the availability of different services and pricing, contact your service provider.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
FCC Draft
Model 3555
26 July 2007
9
■Nokia support
Check www.nokia.com/support or your local Nokia website for the latest version
of this guide, additional information, downloads, and services related to your
Nokia product.
On the website, you can get information on the use of Nokia products and
services. If you need to contact customer service, check the list of local Nokia Care
contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia service center at
www.nokia.com/repair.
1. Get started
■Install SIM card and battery
Always switch the phone off and disconnect the charger before removing the battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.
This phone is intended for use with BL-5C battery. Always use original Nokia
batteries. See Nokia battery authentication guidelines p. 71.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
To remove the back cover of the phone,
press sightly (1) and slide the cover (2).
FCC Draft
Model 3555
26 July 2007
10
Remove the battery as shown.
To open the SIM card holder, press
slightly (1) and lift the holder (2).
Insert the SIM card properly into the
holder.
Close the SIM card holder.
FCC Draft
Model 3555
26 July 2007
11
Replace the battery.
Replace the back cover (1).
Slide the back cover into its place (2).
■Insert a microSD card
Keep all microSD memory cards out of the reach of small children.
A microSD card can be loaded with ringing tones, themes, tones,
images and videos. If you delete, reload, or replace this card,
these functions and features may not function properly.
Use only compatible microSD cards with this phone. Other memory cards, such as Reduced
Size MultiMedia cards, do not fit in the microSD card slot and are not compatible with this
phone. Using an incompatible memory card may damage the memory card as well as the
phone, and data stored on the incompatible card may be corrupted.
Use only microSD cards approved by Nokia for use with this phone. Nokia uses approved
industry standards for memory cards but some brands may not be fully compatible with this
phone.
FCC Draft
Model 3555
26 July 2007
12
Important: Do not remove a microSD card in the middle of an operation when the
card is being accessed. Removing the card in the middle of an operation may
damage the memory card as well as the phone, and data stored on the card may be
corrupted.
1. Remove the back cover and
the battery of the phone.
Slide the microSD memory
card holder down (1) and
flip the card holder up (2).
2. Insert the card into the
memory card holder with
the gold-colored contact
area facing up (3) so they
align with the contacts in
the phone when the card
holder is closed.
3. Close the card holder (4
and 5), reinsert the battery
and slide the back cover
back in place.
■Charge the battery
Check the model number of any charger before use with this phone. This phone is intended
for use when supplied with power from an AC-3, AC-4, or AC-5 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall socket.
2. Connect the charger to your phone.
A CA-44 charging adapter can be used
with older Nokia approved chargers.
If the battery is completely discharged, it
may take a few minutes before the
charging indicator appears on the display
or before any calls can be made.
FCC Draft
Model 3555
26 July 2007
13
The charging time depends on the charger used. Charging a BL-5C battery with
the AC-3 charger takes approximately 2 hours and 20 minutes while the phone is
in the standby mode.
■Open and close the phone
You open and close the phone manually. When you open the fold of the phone, it
opens up to approximately 165 degrees. Do not try to force the fold open beyond
its natural stopping point.
Depending on the Theme a tone sounds when you open and close the phone.
■Switch the phone on and off
Warning: Do not switch the phone on when
wireless phone use is prohibited or when it may
cause interference or danger.
To switch the phone on or off, press and hold the
power key. See Keys and parts p. 15.
If the phone asks for a PIN or a UPIN code, enter the
code (displayed as ****), and select OK.
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of the time
difference with respect to Greenwich Mean Time (GMT), and enter the date. See
Time and date p. 40.
Plug and play service
When you switch on your phone for the first time, and the phone is in the standby
mode, you are asked to get the configuration settings from your service provider
(network service). Confirm or decline the query. See Configuration settings service
p. 8.
FCC Draft
Model 3555
26 July 2007
14
■Connect a headset
You can connect an HS-47 headset
to your phone. Connect the headset
to the phone as shown.
■Antenna
Your phone has an internal
antenna located at the bottom
of the phone. Avoid contact
with the antenna area to
improve call quality.
Note: As with any radio transmitting device, avoid
touching an antenna unnecessarily when the antenna is
in use. For example, avoid touching the cellular antenna
during a phone call. Contact with a transmitting or
receiving antenna affects the quality of the radio
communication, may cause the phone to operate at a
higher power level than otherwise needed, and may
reduce the battery life.
■Phone strap
Remove the back cover of the phone. Insert
the thread of the strap through the eyelet.
Place the thread around the post of the
phone as shown in the picture. Tighten the
thread. Put the back cover back in place.
FCC Draft
Model 3555
26 July 2007
15
2. Your phone
■Keys and parts
1) Earpiece 9) Strap connector
2) Camera 10) Camera key
3) Main display 11) Volume and PTT key
4) Mini display 12) Micro USB connector
5) NaviTM key (scroll key) 13) Charger connector
6) Right selection key 14) Call key
7) End key and power key 15) Left selection key
8) Keypad 16) Headset connector
FCC Draft
Model 3555
26 July 2007
16
■Navigate the menus
The phone offers you an extensive range of functions, which are grouped into
menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List or Grid.
To rearrange the menu, scroll to the menu you want to move, and select
Options > Organize > Move. Scroll to where you want to move the menu, and
select OK. To save the change, select Done > Yes.
2. Scroll through the menu, and select an option (for example, Settings).
3. If the selected menu contains further submenus, select the one you want (for
example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu, select Exit.
■Standby mode
When the phone is ready for use, and you have not entered any characters, the
phone is in the standby mode.
Mini display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6 Clock and date or profile
FCC Draft
Model 3555
26 July 2007
17
Main display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6Clock
7Main display
8The left selection key is Go to or a shortcut to
another function. See My shortcuts p. 40.
9The middle selection key mode is Menu.
10 The right selection key may be Names to access the list of contacts in the
Contacts menu, an operator-specific name to access an operator-specific website,
or a shortcut to a function that you selected. See My shortcuts p. 40.
Active standby
In the active standby mode there is a list of selected phone features and
information on the screen that you can directly access in the standby mode. To
switch on or off the mode, select Menu > Settings > Main display > Active
standby > Active standby mode > On or Off.
In the active standby mode, scroll up or down to navigate the list. Left and right
arrows at the beginning and end of a line indicate that further information is
available by scrolling left or right. To end the active standby navigation mode,
select Exit.
To organize and change the active standby mode, activate the navigation mode,
and select Options > Personalize view.
Indicators
You have unread messages.
You have unsent, canceled or failed messages. This indicator is animated
when actively sending a message.
The phone registered a missed call.
You have unheard voice messages.
FCC Draft
Model 3555
26 July 2007
18
, Your phone is connected to the instant messaging service, and the
availability status is online or offline.
You received one or several instant messages.
The keypad is locked.
The phone does not ring for an incoming call or text message.
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running.
, The phone is registered to the GPRS or EGPRS network.
, A GPRS or EGPRS connection is established.
, The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
, Push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to the
phone.
Calls are limited to a closed user group.
The timed profile is selected.
, , , or
A headset, handsfree, loopset, or music stand enhancement is connected
to the phone.
■Flight mode
You can deactivate all radio frequency functions and still have access to offline
games, calendar, and phone numbers. Use the flight mode in radio sensitive
environments—on board aircraft or in hospitals. When the flight mode is active,
is shown.
Select Menu > Settings > Profiles > Flight > Activate or Customize.
FCC Draft
Model 3555
26 July 2007
19
Warning: With the flight profile you cannot make or receive any calls,
including emergency calls, or use other features that require network
coverage. To make calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the lock code. If
you need to make an emergency call while the device is locked and in the
flight profile, you may be also able to enter an official emergency
number programmed in your device in the lock code field and select
‘Call’. The device will confirm that you are about to exit flight profile to
start an emergency call.
To deactivate the flight mode, select any other profile.
In the flight profile, you may need to unlock the device and change to the calling profile
before making a call.
■Keypad lock (keyguard)
Select Menu or Unlock (1), and press * (2) within 1.5
seconds to lock or unlock the keypad.
If the security keyguard is activated, enter the security
code if requested.
To answer a call when the keyguard is on, press the
call key or open the phone. When you end or reject the
call, the keypad automatically locks.
For Security keyguard, see Phone p. 45.
When the keyguard is on, calls may be possible to the official
emergency number programmed into your phone.
■Functions without a SIM card
Several functions of your phone may be used without installing a SIM card (for
example, the data transfer with a compatible PC or another compatible device).
Without a SIM card, some functions appear dimmed in the menus and cannot be
used.
For an emergency call, some networks may require that a valid SIM card is properly inserted
in the phone.
■Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorised use. For more information on security codes, see Security p. 47.
FCC Draft
Model 3555
26 July 2007
20
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorized use. See Security p. 47.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for
some functions.
The module PIN is required to access the information in the security module. See
Security module p. 68.
The signing PIN is required for the digital signature. See Digital signature p. 69.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking key
(UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code,
respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If
the codes are not supplied with the SIM card, contact your local service provider
for the codes.
Restriction password
The restriction password (4 digits) is required when using the Call restrictions. See
Security p. 47.
3. Call functions
■Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code, the
area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to decrease press
the volume down key.
3. To end the call or to cancel the call attempt, press the end key, or close the
phone.
To search for a name or phone number that you have saved in Contacts, see
Search for a contact p. 36.
FCC Draft
Model 3555
26 July 2007
21
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See 1-touch
dialing p. 38. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the
call begins. See 1-touch dialing in Call p. 45.
Enhanced voice dialing
To make a call you can say the name saved in the contact list of the phone. Voice
commands are language-dependent. To set the language, see Voice recognition
language in Phone p. 45.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. To make a call using voice dialing, in the standby mode, press and hold the
volume down key. A short tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a list
with matches is shown. The phone plays the voice command of the match on
the top of the list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is similar to
voice dialing. See Voice commands in My shortcuts p. 41.
■Answer or decline a call
To answer an incoming call, press the call key, or open the phone. To end the call,
press the end key or close the phone.
To decline an incoming call, press the end key or close the phone. To reject an
incoming call when the phone is closed, press and hold the volume key.
To mute the ringing tone, press the volume key when the phone is closed, or select
Silence when the phone is open.
Call waiting
To answer the waiting call during an active call, press the call key. The first call is
put on hold. To end the active call, press the end key.
To activate the Call waiting function, see Call p. 45.
FCC Draft
Model 3555
26 July 2007
22
■Options during a voice call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options and from the following: Mute or Unmute, Contacts,
Menu, Lock keypad, Record, Loudspeaker or Handset.
Network services options are Answer or Decline, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer calls — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call of up to five persons
Private call —to discuss privately in a conference call
Warning: Do not hold the phone near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
4. Write text
You can enter text (for example, when writing messages) using traditional or
predictive text input. When you write text, text input indicators appear at the top
of the display. indicates traditional text input. indicates predictive text
input. Predictive text input allows you to write text quickly using the phone
keypad and a built-in dictionary. You can enter a letter with a single keypress.
indicates predictive text input with Word suggestions. The phone predicts
and completes the word before you enter all the characters.
, , or appears next to the text input indicator, indicating the character
case. To change the character case, press #.
indicates number mode. To change from the letter to number mode, press
and hold #, and select Number mode.
To set the writing language while writing text, select Options > Writing language.
■Predictive text input
To set predictive text input on, select Options > Prediction options > Prediction >
On.
FCC Draft
Model 3555
26 July 2007
23
Tip: To quickly set predictive text input on or off when writing text, select
and hold Options.
To select the prediction input type, select Options > Prediction options >
Prediction type > Normal or Word suggestions.
1. Start writing a word using the 2 to 9 keys. Press each key only once for one
letter. The entered letters are displayed underlined.
If you selected Word suggestions as prediction type, the phone starts to predict
the word you are writing. After you enter a few letters, and if these entered
letters are not a word, the phone tries to predict longer words. Only the
entered letters are displayed underlined.
To insert a special character, press and hold *, or select Options > Insert
symbol. Scroll to a character, and select Insert.
To write compound words, enter the first part of the word; to confirm it, press
the scroll key right. Write the next part of the word and confirm the word.
To enter a full stop, press 1. If the character is not correct, press * repeatedly.
2. When you finish writing the word and it is correct, to confirm it, press 0 to add
space.
If the word is not correct, press * repeatedly. When the word that you want
appears, select the word.
If the ? character is displayed after the word, the word you intended to write is
not in the dictionary. To add the word to the dictionary, select Spell. Complete
the word (traditional text input is used), and select Save.
■Traditional text input
To set traditional text input on, select Options > Prediction options >Prediction >
Off.
Press a number key, 1 to 9, repeatedly until the desired character appears. Not all
characters available under a number key are printed on the key. The characters
available depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait
until the cursor appears.
The most common punctuation marks and special characters are available under
the 1 key. For more characters, press *.
FCC Draft
Model 3555
26 July 2007
24
5. Messaging
You can read, write, send, and save text, multimedia, e-mail, audio,
and flash messages. All messages are organized into folders.
■Text messages
With the short message service (SMS) you can send and receive text messages,
and receive messages that can contain pictures (network service).
Before you can send any text or SMS e-mail messages, you must save your
message center number. See Message settings p. 33.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider. To save an e-mail address in Contacts, see Search for a
contact p. 36.
Your phone supports the sending of text messages beyond the character limit for a single
message. Longer messages are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use accents or other marks, and characters
from some language options, take up more space, limiting the number of characters that can
be sent in a single message.
An indicator at the top of the display shows the total number of characters left
and the number of messages needed for sending. For example, 673/2 means that
there are 673 characters left and that the message is sent as a series of two
messages.
Write and send a message
1. Select Menu > Messaging > Create message > Message.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
3. Write your message in the Message: field.
4. To send the message, select Send. See Messaging p. 24.
Read and reply to a message
1. To view a received message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox.
2. To reply to a message, select Reply. Write the reply message.
3. To send the message, select Send. See Messaging p. 24.
FCC Draft
Model 3555
26 July 2007
25
■Multimedia messages
Note: Only devices that have compatible features can receive and display
multimedia messages. The appearance of a message may vary depending on the
receiving device.
A multimedia message can contain some attachments.
To check availability and to subscribe to the multimedia messaging network
service, contact your service provider.
Write and send a multimedia message
The wireless network may limit the size of multimedia messages. If the inserted image
exceeds this limit, the phone may make it smaller so that it can be sent by multimedia
messaging service (MMS).
1. Select Menu > Messaging > Create message > Message.
2. Write your message. To add a file, select Insert and add the file.
3. To view the message before sending it, select Options > Preview.
4. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
5. To send the message, select Send. The phone saves the message in the Outbox
folder, and the sending starts.
Copyright protections may prevent some images, music (including ringing tones), and other
content from being copied, modified, transferred or forwarded.
Note: When the phone is sending the message, the animated is shown. This is
an indication that the message has been sent by your phone to the message center
number programmed into your phone. This is not an indication that the message
has been received at the intended destination. For more details about messaging
services, check with your service provider.
If an interruption occurs while the message is being sent, the phone tries to resend
the message a few times. If these attempts fail, the message remains in the
Outbox folder. To cancel the sending of the messages in the Outbox folder, scroll
to the desired message, and select Options > Cancel sending.
Read and reply to a message
Important: Exercise caution when opening messages. Multimedia message objects
may contain malicious software or otherwise be harmful to your phone or PC.
1. To view a received message, select Show. To view it later, select Exit.
FCC Draft
Model 3555
26 July 2007
26
2. To view the whole message if the received message contains a presentation,
select Play.
To view the files in the presentation or the attachments, select Options >
Objects or Attachments.
3. To reply to the message, select Options > Reply > Message, E-mail message,
Flash message, or Audio message. Write the reply message.
4. To send the message, select Send.
■Flash messages
Flash messages are text messages instantly displayed upon reception. Flash
messages are not automatically saved.
To write a message, select Menu > Messaging > Create message > Flash message.
Enter the recipient’s phone number and write your message. To insert a blinking
text into the message, select Options > Insert symbol > Insert blink char. to set a
marker. The text behind the marker blinks until a second marker is inserted.
A received flash message is indicated with Message: and a few words from the
beginning of the message. To read the message, select Read. To extract numbers
and addresses from the current message, select Options > Use detail. To save the
message, select Save and the folder in which you want to save it.
■Nokia Xpress audio messaging
You can use the MMS to create and send an audio message. MMS must be
activated before you can use audio messages.
1. To create a message, select Menu > Messaging > Create message > Audio
message. The recorder opens. To use the recorder, see Voice recorder p. 53.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a
number.
4. To send the message, select Send.
To listen to a received audio message, select Play. If more than one message is
received, select Show > Play. To listen to the message later, select Exit.
■Memory Full
When you receive a message, and the memory for the messages is full, Memory
full. Unable to receive msgs. is shown. To first delete old messages, select OK > Yes
and the folder. Scroll to the desired message, and select Delete. If more messages
FCC Draft
Model 3555
26 July 2007
27
are to be deleted, select Mark. Mark all the messages you want to delete, and
select Options > Delete marked.
■Folders
The phone saves received messages in the Inbox folder.
Messages that have not yet been sent are saved in the Outbox folder.
To set the phone to save the sent messages in the Sent items folder, see Save sent
messages in General settings p. 33.
To edit and send messages that you have written and saved in the Drafts folder,
select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organize your Saved
items subfolders, select Menu > Messaging > Saved items. To add a folder, select
Options > Add folder. To delete or rename a folder, scroll to the desired folder, and
select Options > Delete folder or Rename folder.
Your phone has templates. To create a new template, save a message as a
template. To access the template list, select Menu > Messaging > Saved items >
Templates.
■E-mail application
The e-mail application uses a packet data connection (network service) to allow
you to access your e-mail account. This e-mail application is different from the
SMS e-mail function. To use the e-mail function on your phone, you need a
compatible e-mail system.
You can write, send, and read e-mail with your phone. Your phone supports POP3
and IMAP4 e-mail servers. This application does not support keypad tones.
Before you can send and retrieve any e-mail messages, you must obtain a new
e-mail account or use your current account. To check the availability of your
e-mail account, contact your e-mail service provider.
Check your e-mail settings with your e-mail service provider. You may receive the
e-mail configuration settings as a configuration message. See Configuration
settings service p. 8.
To activate the e-mail settings, select Menu > Messaging > Message settings >
E-mail messages. See E-mail messages p. 35.
FCC Draft
Model 3555
26 July 2007
28
Setting wizard
The setting wizard will start automatically if no e-mail settings are defined in the
phone. To enter the settings manually, select Menu > Messaging > E-mail
mailbox > Options > Yes > Create manually.
You can add, delete, and change the e-mail settings. Make sure that you have
defined the correct preferred access point for your operator. See Configuration
p. 47.
The e-mail application requires an Internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail service; or
connect to the service first, then write and send your e-mail.
1. Select Menu > Messaging > E-mail.
2. If more than one e-mail account is defined, select the account from which you
want to send the e-mail.
3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail
message. To attach a file from Gallery, select Options > Insert.
4. To send the e-mail message, select Send > Send now.
To edit or continue writing your e-mail later, select Options > Save as draft.
The e-mail is saved in Outbox > Drafts.
Download e-mail
1. To download e-mail messages that have been sent to your e-mail account,
select Menu > Messaging > E-mail > Retrieve e-mails.
If more than one e-mail account is defined, select the account from which you
want to download the e-mail.
The e-mail application only downloads e-mail headers at first.
2. Select Back > Inbox, the account name, and the new message, and select
Retrieve to download the complete e-mail message.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail messages may
contain malicious software or otherwise be harmful to your phone or PC.
FCC Draft
Model 3555
26 July 2007
29
1. Select Menu > Messaging > E-mail > Inbox, the account name, and the
desired message.
2. To reply to an e-mail, select Reply > Original text or Empty screen. To reply to
many, select Options > Reply to all. Confirm or edit the e-mail address and
subject, then write your reply.
3. To send the message, select Send > Send now.
E-mail folders
Your phone saves e-mail that you have downloaded from your e-mail account in
the Inbox folder. The Outbox folder contains the following folders: “Account
name” for incoming e-mail, Archive for archiving e-mail, Custom caption for
sorting e-mail, Drafts for saving unfinished e-mail, Outbox for saving e-mail that
has not been sent, and Sent items for saving e-mail that has been sent.
To manage the folders and their e-mail content, select Options to view the
available options of each folder.
■Instant messaging
With instant messaging (IM) (network service) you can send short, simple text
messages to online users. You have to subscribe to a service and register with the
IM service you want to use. For more information about signing up for IM services,
contact your service provider.
To set the required settings for the IM service, see Connect. settings in Access
p. 29. The icons and texts on the display may vary, depending on the IM service.
Note: Depending on your IM service, you may not have access to all of the
features described in this guide.
Access
Select Menu > Messaging > Instant messages. Instant messages may be replaced
by another term depending on the service provider. If more than one set of
connection settings for IM service is available, select the one you want. Select
from the following options:
Login — to connect to the IM service. To set the phone to automatically connect to
the IM service when you switch on the phone; in the login session, select
Automatic login: > On, or select Menu > Messaging > Instant messages, connect
to the IM service, and select Options > Settings > Automatic login > On.
Saved convers. — to view, erase, or rename the conversations you saved during an
IM session
FCC Draft
Model 3555
26 July 2007
30
Connect. settings — to edit the settings needed for messaging and presence.
connection
Connect
To connect to the service, access the instant messages menu, select the IM service,
if needed, and select Login.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the service your status as seen by others is shown in a status
line: Status: Online, My status: Busy or Status: App. off. To change own status,
select Change.
Below the status line there are three folders containing your contacts and
showing their status: Convers. (), Online () and Offline (). To expand the folder,
scroll to it and select Expand (or press scroll right), to collapse the folder select
Collapse (or press scroll left).
Conversations — shows the list of new and read instant messages or invitations to
IM during the active IM session.
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
The icons and texts on the display depend on the IM service.
Online () — shows the number of contacts that are online
Offline () — shows the number of contacts that are offline
To start a conversation, expand the Online () or the Offline () folder and scroll to
the contact with whom you would like to chat and select Chat. To answer an
invitation or to reply to a message expand the Conversations folder and scroll to
the contact to whom you would like to chat and select Open. To add contacts, see
Add IM contacts p. 31.
Groups > Public groups (not visible if groups are not supported by the network) —
the list of bookmarks to public groups provided by the service provider is
displayed. To start a IM session with a group, scroll to a group, and select Join.
Enter the screen name that you want to use as your nickname in the conversation.
FCC Draft
Model 3555
26 July 2007
31
When you have successfully joined the group conversation, you can start a group
conversation. You can create a private group. See Groups p. 32.
Search > Users or Groups — to search for other IM users or public groups on the
network by phone number, screen name, e-mail address, or name. If you select
Groups, you can search for a group by a member in the group, or by group name,
topic, or ID.
Options > Chat or Join group — to start the conversation when you have found
the user or the group you want.
Accept or reject an invitation
If you receive a new invitation, to read it, select Read. If more than one invitation
is received, select an invitation and Open. To join the private group conversation,
select Accept, and enter the screen name you want to use as your nickname. To
reject or delete the invitation, select Options > Reject or Delete.
Read an instant message
If you receive a new message not associated with an active conversation, New
instant message is displayed. To read it, select Read. If more than one message is
received, select a message, and Open.
New messages received during an active conversation are held in Instant
messages > Conversations. If you receive a message from someone not in IM
contacts, the sender ID is displayed. To save a new contact that is not in the phone
memory, select Options > Save contact.
Participate in a conversation
To join or start an IM session, write your message; and select Send.
If you receive a new message during a conversation from a person not taking part
in the current conversation, is displayed, and the phone sounds an alert tone.
Write your message; and select Send. Your message is displayed, and the reply
message is displayed below your message.
Add IM contacts
When connected to the IM service, in the IM main menu select Options > Add
contact > By mobile number, Enter ID manually, Search from serv., or Copy from
server (depending on service provider).
Scroll to a contact. To start a conversation, select Chat.
FCC Draft
Model 3555
26 July 2007
32
Block or unblock messages
When you are in a conversation and want to block messages, select Options >
Block contact.
To block messages from a specific contact in your contacts list, scroll to the
contact in Conversations, Online () or Offline () and select Options > Block
contact > OK.
To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to
the contact you want to unblock, and select Unblock > OK.
Groups
You can use the public groups provided by the service provider, or create your own
private groups for an IM conversation.
Public
You can bookmark public groups your service provider may maintain. Connect to
the IM service, and select Groups > Public groups. Select a group, and Join. If you
are not in the group, enter your screen name as your nickname for the group. To
delete a group from your list, select Options > Delete group.
To search for a group, select Groups > Public groups > Search groups.
Private
Connect to the IM service, and from the main menu select Options > Create
group. Enter the name for the group and the screen name you want to use as your
nickname. Mark the private group members in the contacts list, and write an
invitation.
■Messages
The voice mailbox is a network service and you may need to subscribe to it. For
more information contact your service provider.
To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to
voice messages. To enter, search for, or edit your voice mailbox number, select
Voice mailbox number.
If supported by the network, indicates new voice messages. To call your voice
mailbox number, select Listen.
You can also receive messages on various topics from your service provider
(network service). For more information, contact your service provider. Select
Menu > Messaging > Info messages.
FCC Draft
Model 3555
26 July 2007
33
Write and send service requests (also known as USSD commands), such as
activation commands for network services, to your service provider. Select
Menu > Messaging > Service commands.
To delete messages, select Menu > Messaging > Delete messages > By message
to delete single messages, By folder to delete all messages from a folder, or All
messages.
SIM messages are specific text messages saved to your SIM card. You can copy or
move those messages to the phone memory, but not vice versa. To read SIM
messages, select Menu > Messaging > Options > SIM messages.
■Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and choose
from the following options:
Save sent messages > Yes — to set the phone to save the sent messages in the
Sent items folder
Overwriting in Sent items > Allowed — to set the phone to overwrite the old sent
messages with the new ones when the message memory is full. This setting is
shown only if you set Save sent messages > Yes.
Font size — to select the font size used in messages
Graphical smileys > Yes — to set the phone to replace character-based smileys
with graphical ones
Text messages
The text message settings affect the sending, receiving, and viewing of text and
SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and from the
following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
Message centers > Add center — to set the phone number and name of the
message center that is required for sending text messages. You receive this
number from your service provider.
Message center in use — to select the message center in use
FCC Draft
Model 3555
26 July 2007
34
E-mail message centers > Add center — to set the phone numbers and name of the
e-mail center for sending SMS e-mails.
E-mail center in use — to select the SMS e-mail message center in use
Message validity — to select the length of time for which the network attempts to
deliver your message
Messages sent via — to select the format of the messages to be sent: Text, Page, or
Fax (network service)
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to be sent as
viewed. If you select Reduced, characters with accents and other marks may be
converted to other characters.
Reply via same center > Yes — to allow the recipient of your message to send you a
reply using your message center (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of multimedia
messages. You may receive the configuration settings for multimedia messaging
as a configuration message. See Configuration settings service p. 8. You can also
enter the settings manually. See Configuration p. 47.
Select Menu > Messaging > Message settings > Multimedia msgs. and from the
following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
MMS creation mode - Allows you to select whether or not to create multimedia
messages with restrictions on content. When selecting Restricted, the receiving
device is more likely to support sent messages. Select Free enables you to add
various types of multimedia to the message.
Image size in MMS — to set the image size in multimedia messages. The wireless
network may limit the size of MMS messages. If the inserted picture exceeds this
limit, the phone may make it smaller so that it can be sent by MMS.
Default slide timing — to define the default time between slides in multimedia
messages
Allow multimedia reception — to receive or block the multimedia message, select
Yes or No. If you select In home network, you cannot receive multimedia messages
when outside your home network. The default setting of the multimedia message
FCC Draft
Model 3555
26 July 2007
35
service is generally In home network. The availability of this menu depends on your
phone.
Incoming multi- media messages — to allow the reception of multimedia
messages automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set to No.
Allow advertisements — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No, or Incoming multi- media
messages is set to Reject.
Configuration settings > Configuration — only the configurations that support
multimedia messaging are shown. Select a service provider, Default, or Personal
config. for multimedia messaging. Select Account and an MMS account contained
in the active configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You may receive
the settings as a configuration message. See Configuration settings service p. 8.
You can also enter the settings manually. See Configuration p. 47.
Select Menu > Messaging > Message settings > E-mail messages and from the
following options:
Configuration — to select the set that you want to activate
Account — to select an account provided by the service provider
My name — to enter your name or nickname
E-mail address — to enter your e-mail address
Login information — to enter authentication information used when retrieving
incoming e-mail
Incoming mail settings — to enter the number of mails to be retrieved in maximum
Outgoing mail settings (SMTP) — to enter SMTP (simple mail transfer protocol)
information and setting options used when sending e-mail
Display terminal window > Yes — to perform manual user authentication for
intranet connections
6. Contacts
You can save names and phone numbers (contacts) in the phone
memory and in the SIM card memory.
FCC Draft
Model 3555
26 July 2007
36
The phone memory may save contacts with additional details, such as various
phone numbers and text items. You can also save an image for a limited number of
contacts.
The SIM card memory can save names with one phone number attached to them.
The contacts saved in the SIM card memory are indicated by .
■Save contacts
Make sure that the memory in use is Phone or Phone and SIM. See Settings p. 37.
To save a name and phone number, select Menu > Contacts > Names > Options >
Add new contact. If no contacts are stored, select Menu > Contacts > Add.
The first number you save is automatically set as the default number, and it is
indicated with a frame around the number type indicator (for example, ).
When you select a name from contacts (for example, to make a call), the default
number is used unless you select another number.
In the phone memory you can save different types of phone numbers, a tone or a
video clip, and short text items for a contact.
■Search for a contact
Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the
first characters of the name you are searching for. Press the call key to call the
number.
To save details for a contact, search for the contact to which you want to add a
detail, and select Details > Options > Add detail. Select from the options
available.
■Edit contacts
Select Options > Edit, search for the contact, and select Details to edit a name,
number, text item, or to change the image.
■Delete contacts
To delete all the contacts and the details attached to them from the phone or SIM
card memory, select Menu > Contacts > Delete all contacts > From phone mem.
or From SIM card.
To delete a contact, search for the desired contact, and select Options > Delete
contact.
FCC Draft
Model 3555
26 July 2007
37
To delete a number, text item, or an image attached to the contact, search for the
contact, and select Details. Scroll to the desired detail, and select Options >
Delete and your desired option.
■Groups
Select Menu > Contacts > Groups to arrange the names and phone numbers
saved in the memory into caller groups with different ringing tones and group
images.
■Synchronize all
Synchronize your calendar, contacts data, and notes with a remote Internet server
(network service). For details see Synchronize from a server p. 44.
■Copy or move contacts
You can move or copy contacts from the phone memory to the SIM card memory,
or vice versa. The SIM card can save names with one phone number attached to
them.
To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to
the contact, and select Options > Move contact or Copy contact.
To move or copy marked contacts, select Menu > Contacts > Names. Scroll to a
contact, and select Options > Mark. Then mark all other contacts, and select
Options > Move marked or Copy marked.
To move or copy all contacts, select Menu > Contacts > Move contacts or Copy
contacts.
■Business cards
You can send and receive a person’s contact information from a compatible device
that supports the vCard standard as a business card.
To send a business card, search for the contact whose information you want to
send, and select Details > Options > Send bus. card.
When you receive a business card, select Show > Save to save the business card in
the phone memory. To discard the business card, select Exit > Yes.
■Settings
Select Menu > Contacts > Settings and from the following options:
FCC Draft
Model 3555
26 July 2007
38
Memory in use — to select the SIM card or phone memory for your contacts. Select
Phone and SIM to recall names and numbers from both memories. In that case,
when you save names and numbers, they are saved in the phone memory.
Contacts view — to select how the names and numbers in Contacts are displayed
Name display — to select whether the contact’s first or last name is displayed first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■1-touch dialing
To assign a number to a speed-dialing key, select Menu > Contacts > 1-touch
dialing and scroll to the speed-dialing number you want.
Select Assign, or if a number has already been assigned to the key, select
Options > Change. Select Find and locate the contact you want to assign. If the
1-touch dialing function is off, the phone asks whether you want to activate it.
See also 1-touch dialing in Call p. 45.
To make a call using the speed-dialing keys, see 1-touch dialing p. 21.
■Info, service, and my numbers
Select Menu > Contacts and from one of these options:
Info numbers — to call the information numbers of your service provider if the
numbers are included on your SIM card (network service)
Service numbers — to call the service numbers of your service provider if the
numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card, if the
numbers are included on your SIM card
7. Log
The phone registers your missed, received, and dialed calls if the
network supports it and the phone is switched on and within the network service
area.
To view the information on your calls, select Menu > Log > Missed calls, Received
calls, or Dialed numbers. To view your recent missed and received calls and the
dialed numbers chronologically, select Call log. To view the contacts to whom you
most recently sent messages, select Message recipients.
FCC Draft
Model 3555
26 July 2007
39
To view the information on your recent communications, select Menu > Log >
Call timers, Packet data counter, or Packet data conn. timer.
To view how many text and multimedia messages you have sent and received,
select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Some timers may be reset during service or software upgrades.
8. Settings
■Profiles
Your phone has various settings groups called profiles, for which you can
customize the phone tones for different events and environments.
Select Menu > Settings > Profiles, the desired profile and from the following
options: Activate, Customize, or Timed.
■Themes
A theme contains elements for personalizing your phone.
Select Menu > Settings > Themes and from the following options: Select theme
or Theme downloads.
■Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the Profiles
menu. See Customize in Profiles p. 39.
To set the phone to ring only for calls from phone numbers that belong to a
selected caller group, select Alert for. Scroll to the caller group you want or All
calls, and select Mark.
Select Options > Save to save the settings or Cancel to leave the settings
unchanged.
If you select the highest ringing tone level, the ringing tone reaches its highest level after a
few seconds.
■Main Display
Select Menu > Settings > Main display and from the available options:
FCC Draft
Model 3555
26 July 2007
40
Wallpaper — to add the background image in the standby mode
Active standby — to switch the active standby mode on or off and to organize and
personalize the active standby mode
Standby mode font color — to select the color for the text in the standby mode
Navigation key icons — to display the icons of the current navigation key shortcuts
in the standby mode when active standby is off
Notification details — to display or hide details, such as contact information in a
missed call or message received notifications
Fold animation — to set your phone to display an animation when you open and
close the phone
Font size — to set the font size for messaging, contacts, and web pages
Operator logo — to set your phone to display or hide the operator logo (network
service)
Cell info display > On — to display the cell identity, if available from the network
■Mini display
Select Menu > Settings > Mini display. You can change the settings for Sleep
mode and other settings.
■Time and date
To change the time and date settings, select Menu > Settings > Date and time >
Date and time settings, Date and time format settings, or Auto-update of date &
time (network service).
When traveling to a different time zone, select Menu > Settings > Date and
time > Date and time settings > Time zone and the time zone of your location in
terms of the time difference with respect to Greenwich Mean Time (GMT) or
Universal Time Coordinated (UTC). For example, GMT -5 denotes the time zone for
New York (USA), 5 hours west of Greenwich/London (UK).
■My shortcuts
With personal shortcuts you get quick access to often used functions of the
phone.
To select a function from the list, select Menu > Settings > My shortcuts > Left
selection key, Right selection key, Navigation key, Active standby key, or Voice
commands.
FCC Draft
Model 3555
26 July 2007
41
Voice commands
To call contacts and carry out phone functions, say the voice commands. Voice
commands are language-dependent. To set the language, see Voice recognition
language in Phone p. 45.
To select the phone functions to activate with voice commands, select Menu >
Settings > My shortcuts > Voice commands and a folder. Scroll to a function.
indicates that the voice tag is activated. To activate the voice tag, select Add. To
play the activated voice command, select Playback. To use voice commands, see
Enhanced voice dialing p. 21.
To manage the voice commands, scroll to a phone function, and select from the
following options:
Edit or Remove — to change or deactivate the voice command of the selected
function
Add all or Remove all — to activate or deactivate voice commands to all functions
in the voice commands list
■Connectivity
You can connect the phone to a compatible device using a Bluetooth wireless
technology or a USB data cable connection. You can also define the settings for
EGPRS dial-up connections.
Bluetooth wireless technology
This phone is compliant with Bluetooth Specification 2.0 + EDR supporting the following
profiles: generic access, generic object exchange, hands-free, headset, object push, file
transfer, dial-up networking, SIM access, service discovery application profile, advanced
audio and distribution profile, audio/video remote control profile, generic audio/video
distribution profile, personal area network profile, and serial port. To ensure interoperability
between other devices supporting Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other devices to determine their
compatibility with this phone.
There may be restrictions on using Bluetooth technology in some locations. Check with your
local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the background
while using other features, increase the demand on battery power and reduce the battery
life.
Bluetooth technology allows you to connect the phone to a compatible Bluetooth
device within 10 meters (32 feet). Since devices using Bluetooth technology
FCC Draft
Model 3555
26 July 2007
42
communicate using radio waves, your phone and the other devices do not need to
be in direct line-of-sight, although the connection can be subject to interference
from obstructions such as walls or from other electronic devices.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the following
options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth function.
indicates that Bluetooth is activated. When activating Bluetooth technology for
the first time, you are asked to give a name for the phone. Use a unique name that
is easy for others to identify.
Search for audio enhancements — to search for compatible Bluetooth audio
devices. Select the device that you want to connect to the phone.
Paired devices — to search for any Bluetooth device in range. Select New to list
any Bluetooth device in range. Select a device, and Pair. Enter an agreed Bluetooth
passcode of the device (up to 16 characters) to associate (pair) the device to your
phone. You must only give this passcode when you connect to the device for the
first time. Your phone connects to the device, and you can start data transfer.
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth
connection is currently active, select Active devices. To view a list of Bluetooth
devices that are currently paired with the phone, select Paired devices.
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select Menu >
Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name.
If you are concerned about security, turn off the Bluetooth function, or set My phone's
visibility to Hidden. Only accept Bluetooth communication from other devices you recognize
and have agreed to accept.
Packet data
General packet radio service (GPRS) is a network service that allows mobile
devices to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data connection and from the following options:
FCC Draft
Model 3555
26 July 2007
43
When needed — to set the packet data connection to established when an
application needs it. The connection will be closed when the application is
terminated.
Always online — to set the phone to automatically connect to a packet data
network when you switch the phone on
Modem settings
You can connect the phone using Bluetooth wireless technology or USB data
cable connection to a compatible PC and use the phone as a modem to enable
GPRS connectivity from the PC.
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, and
activate the access point you want to use. Select Edit active access point > Packet
data access point, enter a name to change the access point settings, and select
OK. Select Packet data access point, enter the access point name (APN) to
establish a connection to an network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See Nokia PC Suite p. 69. If you have
set the settings both on your PC and on your phone, the PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes with another compatible
device (for example, a mobile phone), a compatible PC, or a remote Internet server
(network service).
Your phone allows data transfer with a compatible PC or another compatible
device when using the phone without a SIM card.
Transfer contact list
To copy or synchronize data from your phone, the name of the device and the
settings must be in the list of transfer contacts. If you receive data from another
device (for example, a compatible mobile phone), the corresponding transfer
contact is automatically added to the list, using the contact data from the other
device. Server sync and PC sync are the original items in the list.
To add a new transfer contact to the list (for example a mobile phone), select
Menu > Settings > Connectivity > Data transfer > Options > Add contact >
Phone sync or Phone copy, and enter the settings according to the transfer type.
FCC Draft
Model 3555
26 July 2007
44
To edit the copy and synchronize settings, select a contact from the transfer
contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list, select
Options > Delete.
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable connection. The
other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and
the transfer contact from the list, other than Server sync or PC sync. According to
the settings, the selected data is copied or synchronized.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite
software for your phone on the PC. Use Bluetooth wireless technology or a USB
data cable for the synchronization, and start the synchronization from the PC.
Synchronize from a server
To use a remote internet server, subscribe to a synchronization service. For more
information and the settings required for this service, contact your service
provider. You may receive the settings as a configuration message. See
Configuration settings service p. 8 and Configuration p. 47.
To start the synchronization from your phone, select Menu > Settings >
Connectivity > Data transfer > Server sync. Depending on the settings, select
Initializing sync or Initializing copy.
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete.
USB data cable
You can use the USB data cable to transfer data between the phone and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable.
Confirm USB data cable connected. Select mode. and select from the following
options:
Nokia mode — to use the phone to interact with applications on a PC that has
Nokia PC Suite
FCC Draft
Model 3555
26 July 2007
45
Printing & Media — to use the phone with a PictBridge compatible printer, or to
connect the phone to a PC to synchronize it with Windows Media Player (music,
video)
Data storage — to connect to a PC that does not have Nokia software and use the
phone as a data storage
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Nokia mode, Printing & Media, or Data storage.
■Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You may not
be able to forward your calls if some call restriction functions are active. See Call
restrictions in Security p. 47.
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the power key, the camera key, the left and right selection keys, or the end
key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
Voice clarity > Active — to enhance speech intelligibility especially in noisy
environments
1-touch dialing > On — to dial the names and phone numbers assigned to the
speed-dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service). See Call waiting p. 21.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select Set by network.
Answer when fold is opened > On — to answer an incoming call by opening the
fold
■Phone
Select Menu > Settings > Phone and from the following options:
FCC Draft
Model 3555
26 July 2007
46
Language settings — to set the display language of your phone, select Phone
language. Automatic selects the language according to the information on the
SIM card. To set a language for the voice playback, select Voice recognition
language. See Enhanced voice dialing p. 21 and Voice commands in My shortcuts
p. 40.
Memory status — to view the amount of used and available phone memory
Automatic keyguard — to set the keypad of your phone to lock automatically after
a preset time delay when the phone is in the standby mode and no function of the
phone has been used. Select On, and set the time.
Security keyguard — to set the phone to ask for the security code when you unlock
the keyguard. Enter the security code, and select On.
Welcome note — to write the note that is shown when the phone is switched on
Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You
cannot access this option during an active call.
Operator selection > Automatic — to set the phone to automatically select one of
the cellular networks available in your area. With Manual you can select a
network that has a roaming agreement with your service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone > On — the phone plays a tone when switched on
Flight query > On — the phone asks whether to use the flight profile every time
when switched on. With flight profile all radio connections are switched off. The
flight profile should be used in areas sensitive to radio emissions.
Confirm SIM service actions — See SIM services p. 64.
■Enhancements
This menu or the following options are shown only if the phone is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and depending
on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer
is off.
FCC Draft
Model 3555
26 July 2007
47
Lights — to set the lights permanently On. Select Automatic to set the lights on for
15 seconds after a key press.
If your phone is provided with a hearing aid coil select Hearing aid > T-coil
hearing aid mode > On to optimize the sound quality when using a t-coil hearing
aid. is shown when the T-coil hearing aid mode is active.
■Configuration
You can configure your phone with settings required for certain services to
function correctly. Your service provider may also send you these settings. See
Configuration settings service p. 8.
Select Menu > Settings > Configuration and from the following options:
Default configuration settings — to view the service providers saved in the phone.
To set the configuration settings of the service provider as default settings, select
Options > Set as default.
Activate default in all applications — to activate the default configuration settings
for supported applications
Preferred access point — to view the saved access points. Scroll to an access point,
and select Options > Details to view the name of the service provider, data bearer,
and packet data access point or GSM dial-up number.
Connect to service provider support — to download the configuration settings
from your service provider
Device manager settings — to allow or prevent the phone from receiving phone
software updates. This option may not be available, depending on your phone.
Personal configuration settings — to add new personal accounts for various
services manually, and to activate or delete them. To add a new personal account
if you have not added any, select Add new; otherwise, select Options > Add new.
Select the service type, and select and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select Options > Delete or Activate.
■Security
When security features that restrict calls are in use (such as call restriction, closed user
group, and fixed dialing) calls still may be possible to the official emergency number
programmed into your phone.
Select Menu > Settings > Security and from the following options:
FCC Draft
Model 3555
26 July 2007
48
PIN code request and UPIN code request — to set the phone to ask for your PIN or
UPIN code every time the phone is switched on. Some SIM cards do not allow the
code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SIM cards do
not allow the code request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from your phone
(network service). A restriction password is required.
Fixed dialing — to restrict your outgoing calls to selected phone numbers if this
function is supported by your SIM card. When the fixed dialing is on, GPRS
connections are not possible except while sending text messages over a GPRS
connection. In this case, the recipient’s phone number and the message center
number must be included in the fixed dialing list.
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — to set the phone to ask for the security code whenever a
new SIM card is inserted into the phone. If you select Memory, the phone asks for
the security code when the SIM card memory is selected, and you want to change
the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
restriction password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or user
certificates downloaded into your phone. See Certificates p. 68.
Security module settings — to view Security module details, select Module PIN
request, or change the module PIN and signing PIN. See also Access codes p. 19.
■Digital rights management
Content owners may use different types of digital rights management (DRM)
technologies to protect their intellectual property, including copyrights. This
phone uses various types of DRM software to access DRM-protected content.
With this phone you can access content protected with OMA DRM 1.0 and 2.0. If
certain DRM software fails to protect the content, content owners may ask that
such DRM software's ability to access new DRM-protected content be revoked.
Revocation may also prevent renewal of such DRM-protected content already in
FCC Draft
Model 3555
26 July 2007
49
your phone. Revocation of such DRM software does not affect the use of content
protected with other types of DRM or the use of non-DRM-protected content.
To view the permissions for a protected file, scroll to the file, and select Options >
Activation keys. For example, you can see how many times you can view a video or
how many days you have left for listening to a song.
To extend the permissions for a file, select Options and the corresponding option
for the file type, such as Activate theme. You can send certain types of protected
files to your friends, and they can buy their own activation keys.
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
Digital rights management (DRM) protected content comes with an associated activation
key that defines your rights to use the content.
If your phone has OMA DRM protected content, to back up both the activation keys and the
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer
the activation keys which need to be restored with the content for you to be able to
continue the use of OMA DRM protected content after the phone memory is formatted. You
may also need to restore the activation keys in case the files on your phone get corrupted.
■Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore settings. Enter the security code. If you have not created a
passcode, the phone will prompt you to create one. The names and phone numbers
saved in Contacts, are not deleted.
9. Gallery
In this menu you can manage images, video clips, music files,
themes, graphics, tones, recordings, and received files. These files
are stored in the phone memory or an attached microSD memory card and may be
arranged in folders.
Your phone supports an activation key system to protect acquired content. Always
check the delivery terms of any content and activation key before acquiring them,
as they may be subject to a fee.
Copyright protections may prevent some images, music (including ringing tones), and other
content from being copied, modified, transferred or forwarded.
To see the list of folders, select Menu > Gallery.
FCC Draft
Model 3555
26 July 2007
50
To see the available options of a folder, select a folder > Options.
To view the list of files in a folder, select a folder > Open.
To see the available options of a file, select a file > Options.
To view the folders of the memory card when moving a file, scroll to the memory
card, and press the scroll key right.
■Print images
Your phone supports Nokia XPressPrint. To connect it to a
compatible printer use a data cable or send the image via Bluetooth to a printer
supporting Bluetooth technology. See Connectivity p. 41.
You can print images that are in the .jpg format. The images taken with the
camera are automatically saved in the .jpg format.
Select the image you want to print and Options > Print.
■Memory card
Keep all memory cards out of the reach of small children.
You can use the microSD memory card to store your multimedia files such as video
clips, music tracks, and sound files, images, and messaging data, and to back up
information from phone memory.
Some of the folders in Gallery with content that the phone use, for example,
Themes, may be stored on a memory card.
To insert and remove the microSD memory card see Insert a microSD card p. 11.
Format the memory card
When a memory card is formatted, all data on the card is permanently lost. Some
memory cards are supplied preformatted and others require formatting. Consult
your retailer to find out if you must format the memory card before you can use it.
To format a memory card, select Menu >Gallery or Applications, the memory card
folder , Options > Format mem. card > Yes.
When formatting is complete, enter a name for the memory card.
Lock the memory card
To set a password to lock your memory card to help prevent unauthorized use,
select Options > Set password. The password can be up to eight characters long.
The password is stored in your phone and you do not have to enter it again while
you are using the memory card on the same phone. If you want to use the memory
FCC Draft
Model 3555
26 July 2007
51
card on another device, you are asked for the password. To delete the password,
select Options > Delete password.
Check memory consumption
To check the memory consumption of different data groups and the available
memory for installing new applications or software on your memory card, select
Options > Details.
10. Media
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others, including copyrights.
You can take photos or record live video clips with the built-in VGA camera with autofocus
and zoom.
Video clips and photos can be stored on the phone memory or on the microSD memory card.
■Camera
The camera produces pictures in .jpg format, and you can digitally zoom up to four
times.
Take a photo
To open the camera viewfinder, select Menu > Media > Camera.
To zoom in and out in camera mode, press volume keys up or
down.
To take an image, select Capture, or press camera key. The
phone saves the images on the phone memory or the optional
memory card.
Select Options to set Img. sequence on to take images in a fast
sequence. Eight images are taken in a sequence. Other options
may be available.
Select Options > Settings >Image preview time and a preview
time to display the taken images on the display. During the
preview time, select Back to take another image or Send to
send the image as a multimedia message.
Your phone supports an image capture resolution of 640 x 480 pixels.
Resolutions 320 x 240 and 160 x 120 are also supported.
FCC Draft
Model 3555
26 July 2007
52
Camera and video options
To use a filter, select Options > Effects > Normal, Grayscale, Sepia, Negative.
To change the camera and video settings, select Options > Settings.
■Video
You can record video clips in .3gp format. Available recording time depends on the
video clip length and quality settings.
The length and file size of the clips may vary depending on the selected quality
and available memory. To set the quality of your video clips, select Menu >
Media > Video > Options > Settings >Video clip quality > High, Normal or Basic.
To select the file size limit, select Menu > Media > Video > Options > Settings >
Video clip length. Default means that the file size is limited so that it fits into a
multimedia message (multimedia message size can vary among devices).
Maximum means that all available memory is used. Available memory depends on
where the video clip is stored.
Record a video clip
Select Menu > Media > Video > Record. You can also press and hold the camera
key. To pause the recording, select Pause; to resume the recording, select
Continue. To stop the recording, select Stop. The phone saves the recording in
Gallery > Video clips.
To zoom in or out, press the volume key up or down, or scroll left and right.
■Music player
Your phone includes a music player for listening to music tracks, recordings or,
other sound files that you have transferred to the phone with the Nokia Audio
Manager application, which is part of Nokia PC Suite. See Nokia PC Suite p. 69.
Music files stored in a folder in the phone memory or in a folder of the memory
card, will automatically be detected and added to the default track list.
To open the music player, select Menu > Media > Music player.
Playing the music tracks
Warning! Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing.
Operate the music player with the keys on the phone or with the virtual keys on
the display.
FCC Draft
Model 3555
26 July 2007
53
When you open the Music player menu, the details of the first track on the default
track list are shown. To play, select .
To adjust the volume level, use the volume keys on the side of the phone.
To pause the playing, select .
To stop the playing, press and hold the end key
To skip to the next track, select . To skip to the beginning of the previous
track, select .
To rewind the current track, select and hold . To fast forward the current
track, select and hold . Release the key at the position you want.
Settings for the music player
In the Music player menu, the following options may be available:
All songs — View all the tracks available on the track list and play the desired
track. To play a track, scroll to the desired track, and select Play.
If you select Options, you can refresh the track list (for example, after adding new
tracks to the list) and change the track list that is shown when you open the music
player menu if several track lists are available in the phone. You also may send a
track to another device.
Music library — View the database of the available music tracks. You can choose
the music to listen to, and create and manage the content of the library.
Play options — Select Random to play the tracks on the track list in random order.
Select Repeat to play the current track or the entire track list repeatedly.
Media equalizer — Select or define an equalizer setting. See Equalizer p. 54.
Play via Bluetooth — Connect to a Bluetooth audio accessory.
Use tone — Set the currently played music track, for example, as ringing tone.
Web page — to access a page associated with the currently played track. Dimmed
if no Web page is available.
Music downloads— to connect to a browser service related to the current track.
This function is only available when the address of the service is included in the
track.
■Voice recorder
You can record pieces of speech, sound, or an active call, and save them in Gallery.
This is useful when recording a name and phone number to write down later.
The recorder cannot be used when a data call or GPRS connection is active.
FCC Draft
Model 3555
26 July 2007
54
Record sound
1. Select Menu > Media > Recorder.
To use the graphical keys , , or on the display, scroll left or right to
the desired key, and select it.
2. To start the recording, select . To start the recording during a call, select
Options > Record. While recording a call, all parties to the call hear a faint
beeping sound. When recording a call, hold the phone in the normal position
near to your ear. To pause the recording, select .
3. To end the recording, select . The recording is saved in Gallery > Recordings.
To listen to the latest recording, select Options > Play last recorded.
To send the last recording, select Options > Send last recorded.
To see the list of recordings in Gallery, select Options > Recordings list >
Recordings.
■Equalizer
To control the sound quality when using the music player by amplify or diminish
frequency bands.
Select Menu > Media > Equalizer.
To activate a set, scroll to one of the equalizer sets, and select Activate.
To view, edit, or rename a selected set, select Options > View, Edit, or Rename.
Not all sets can be edited or renamed.
11. Organize r
■Alarm clock
You can set the phone to alarm at a desired time. Select Menu > Organizer >
Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To change the alarm
time when the alarm time is set, select On.
To set the phone to alert you on selected days of the week, select Repeat alarm.
To select the alarm tone, select Alarm tone:.
To set a snooze time-out, select Snooze time-out and the time.
FCC Draft
Model 3555
26 July 2007
55
Stop the alarm
The phone sounds an alert tone even if the phone was switched off. To stop the
alarm, select Stop. If you let the phone continue to sound the alarm for a minute
or select Snooze, the alarm stops for the time you set in Snooze time-out, then
resumes.
If the alarm time is reached while the phone is switched off, the phone switches itself on and
starts sounding the alarm tone. If you select Stop, the phone asks whether you want to
activate the phone for calls. Select No to switch off the phone or Yes to make and receive
calls. Do not select Yes when wireless device use may cause interference or danger.
■Calendar
Select Menu > Organizer > Calendar.
The current day is indicated by a frame. If there are any notes set for the day, the
day is in bold type, and the beginning of the note is shown below the calendar. To
view the day notes, select View. To view a week, select Options > Week view. To
delete all notes in the calendar, select the month or week view, and select
Options > Delete all notes.
To set the date, time, time zone, date or time format, date separator, default view,
or the first day of the week, select Settings.
To set the phone to delete old notes automatically after a specified time, select
Auto-delete notes.
Make a calendar note
Select Menu > Organizer > Calendar. Scroll to the date, and select Options >
Make a note and one of the following note types: Meeting, Call,
Birthday, Memo, or Reminder. Fill in the fields.
Note alarm
The phone displays the note and if set, sounds a tone. With a call note on the
display, to call the displayed number, press the call key. To stop the alarm and to
view the note, select View. To stop the alarm for 10 minutes, select Snooze.
To stop the alarm without viewing the note, select Exit.
■To-do list
To save a note for a task that you must do, select Menu > Organizer > To-do list.
To make a note if no note is added, select Add note. Fill in the fields, and select
Save.
FCC Draft
Model 3555
26 July 2007
56
To view a note, scroll to it, and select View. While viewing a note, you can also
select an option to edit the attributes. You can also select an option to delete the
selected note and delete all the notes that you have marked as done.
■Notes
To write and send notes, select Menu > Organizer > Notes.
To make a note if no note is added, select Add note. Write the note, and select
Save.
■Calculator
The calculator in your phone provides basic arithmetic and trigonometric
functions, calculates the square and the square root, the inverse of a number, and
converts currency values.
Note: This calculator has limited accuracy and is designed for simple calculations.
Select Menu > Organizer > Calculator. When 0 is displayed on the screen, enter
the first number in the calculation. Press # for a decimal point. Scroll to the
desired operation or function or select it from the Options. Enter the second
number. Repeat this sequence as many times as it is necessary. To start a new
calculation, first select and hold Clear.
To perform a currency conversion, select Menu > Organizer > Calculator. To save
the exchange rate, select Options > Exchange rate. Select either of the displayed
options. Enter the exchange rate, press # for a decimal point, and select OK. The
exchange rate remains in the memory until you replace it with another one. To
perform the currency conversion, enter the amount to be converted, and select
Options > To home or To foreign.
Note: When you change base currency, you must enter new exchange rates
because all previously set exchange rates are cleared.
■Countdown timer
To start the countdown timer, select Menu > Organizer > Timer > Normal timer,
enter the alarm time, and write a note text that is displayed when the time
expires. To start the countdown timer, select Start. To change the countdown
time, select Change time. To stop the timer, select Stop timer.
To have an interval timer with up to 10 intervals started, first enter the intervals.
Select Menu > Organizer > Timer > Interval timer. To start the timer, select Start
timer > Start.
FCC Draft
Model 3555
26 July 2007
57
■Stopwatch
You can measure time, take intermediate times, or take lap times using the
stopwatch. During timing, the other functions of the phone can be used. To set the
stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using other features
increases the demand on battery power and reduces the battery life.
Select Menu > Organizer > Stopwatch and from the following options:
Split timing — to take intermediate times. To start the time observation, select
Start. Select Split every time that you want to take an intermediate time. To stop
the time observation, select Stop.
To save the measured time, select Save.
To start the time observation again, select Options > Start. The new time is added
to the previous time. To reset the time without saving it, select Reset.
Lap timing — to take lap times
Continue — to view the timing that you have set in the background
Show last time — to view the most recently measured time if the stopwatch is not
reset
View times or Delete times — to view or delete the saved times
12. Push to talk
Select Menu > Push to talk.
Push to talk (PTT) over cellular is a two-way radio service available over
a GPRS cellular network (network service).
You can use PTT to have a conversation with one person or with a group of people
(channel) having compatible devices. While you are connected to the PTT service,
you can use the other functions of the phone.
To check availability and costs, and to subscribe to the service, contact your
network operator. Roaming services may be more limited than for normal calls.
Before you can use the PTT service, you must define the required PTT service
settings. See PTT settings p. 61 and Configuration settings p. 62.
FCC Draft
Model 3555
26 July 2007
58
■PTT channels
A PTT channel comprises a group of people (for example, friends or a workteam)
who joined the channel after they were invited to. When you call a channel, all
members joined to the channel hear the call simultaneously.
There are different types of PTT channels:
Public channel — Every channel member can invite other persons.
Private channel — Only persons which receive an invitation by the channel creator
can join in.
Provisioned channel — A permanent channel is created by the service provider.
You can set the status of each channel to Active or Inactive.
The number of active channels and the number of members per channel is limited.
Contact your service provider for details.
Create a channel
To add a channel, select Menu > Push to talk > Add channel and enter the settings
in the form fields:
Channel name: — Enter a name for the new channel.
Channel status: — Select Active to set the channel active, or Inactive to disable the
channel.
Chnl. nickname: — Enter your nick name to be shown the new channel.
Chnl. security: > Public channel or Private channel
Image: — Select Change and an image from the Gallery or the Default graphic to
set a graphic for the new channel.
To send an invitation to the channel, select Yes when the phone requests it. The
recipient of the invitation is added to the member list of the channel when the
invitation is accepted. To send further invitations select Menu > Push to talk >
Channel list, a channel, and Options > Send invitation. To send the invitation, use
a text message.
To add a provisioned channel, select Menu > Push to talk > Add channel >
Options > Edit add. manually. Enter the Channel addr.: provided by your service
provider.
Receive an invitation
1. When you receive a text message invitation to a channel, Channel invitation
received: is displayed.
FCC Draft
Model 3555
26 July 2007
59
2. To view the nickname of the person who sent the invitation and the channel
address if the channel is not a private channel, select View.
3. To add the channel to your phone, select Save.
4. To set the status for the channel, select Active or Inactive.
To reject the invitation, select Exit > Yes, or select View > Discard > Yes.
■Switch PTT on and off
To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or press
and hold the PTT key. indicates the PTT connection. indicates that the
service is temporarily unavailable. If you have added channels to the phone, you
are automatically joined to the active channels.
You may assign a default function to the PTT key to open the channel list, the
contacts list or a single channel or contact. See PTT settings p. 61.
To disconnect from the PTT service, select Switch PTT off.
■Make and receive a PTT call
Warning: Do not hold the phone near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
To make a channel call, a one-to-one call, or a call to multiple recipients, you must
hold the PTT key as long as you talk. To listen to the response, release the PTT key.
You may be able to check the login status of your contacts in Menu > Push to
talk > Contacts list. This service depends on your network operator and is only
available for subscribed contacts. To subscribe a contact, select
Options >Subscribe contact, or if one or more contacts are already marked
Subscribe marked.
or indicate that the person is either available or unknown.
indicates that the person wants not to be disturbed, but can receive callback
requests. indicates that the person does not have PTT switched on.
Make a channel call
To call a channel, select Channel list, the desired channel, and press and hold the
PTT key.
Make a one-to-one call
To start a one-to-one call from the list of contacts, select Contacts > Names or
Menu > Push to talk > Contacts list. Scroll to a contact, and press and hold the PTT
key.
FCC Draft
Model 3555
26 July 2007
60
To start a one-to-one call from the list of PTT channels, select Channel list, the
desired channel, and Members. Scroll to the desired contact, and press and hold
the PTT key.
To start a one-to-one call from the list of callback requests you have received,
select Callback inbox. Scroll to the desired nickname, and press and hold the PTT
key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients receive
an incoming call and need to accept the call in order to participate. If supported
by your network operator, you also may select contacts with a phone number but
without PTT number. For details, contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT key to start the call. The participating contacts are
shown on the display, as soon as they join the call.
3. Press and hold the PTT key to talk to them. Release the PTT key to hear the
response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Information, such as the
channel, the phone number, or the nickname (network service) of the caller are
displayed.
You can either accept or reject an incoming one-to-one call if you have set the
phone to first notify you of the one-to-one calls.
When you press and hold the PTT key while the caller is talking, you hear a
queuing tone, and Queuing is displayed. Press and hold the PTT key, and wait for
the other person to finish; then you can talk immediately.
■Callback requests
If you make a one-to-one call and do not get a response, you can send a request
for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk menu, select
Contacts list. Scroll to a contact, and select Options > Send PTT callback.
FCC Draft
Model 3555
26 July 2007
61
To send a callback request from Contacts, search for the desired contact, and
select Details. Scroll to the PTT address, and select Options > Send PTT callback.
To send a callback request from the channel list in the PTT menu, select Channel
list, and scroll to the desired channel. Select Members, scroll to the desired
contact, and select Options > Send PTT callback.
To send a callback request from the callback request list in the Push to talk menu,
select Callback inbox. Scroll to a contact, and select Options > Send PTT callback.
Respond to a callback request
When someone sends you a callback request, Callback request received is
displayed in the standby mode.
To open the Callback inbox, select View. The list of nicknames of the persons who
have sent you callback requests is shown.
To make a one-to-one call, select the desired request and press and hold the PTT
key.
To send a call request back to the sender, select Options > Send PTT callback.
To delete the request, select Delete.
To save a new contact or to add the PTT address to a contact from a received
callback request, select Options > Save as or Add to contact.
■Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one calls in
the following ways:
To add a PTT address to a name in Contacts, search for the desired contact, select
Details > Options > Add detail > PTT address. A contact will only appear in the PTT
contact list, if the PTT address is entered.
To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts
list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service, select Channel
list, and scroll to the desired channel. Select Members, scroll to the member
whose contact information you want to save, and select Options. To add a new
contact, select Save as. To add a PTT address to a name in Contacts, select Add to
contact.
■PTT settings
Select Menu >Push to talk > PTT settings.
FCC Draft
Model 3555
26 July 2007
62
1 to 1 calls > On — to set the phone to receive incoming calls. To make but not
receive one-to-one calls, select Off. The service provider may offer some services
that override these settings. To set the phone to notify you first of incoming
one-to-one calls with a ringing tone, select Notify.
PTT key default function — to set the function to be performed when you press and
hold the PTT key.
Show my login status — to send my login status to others.
PTT status in startup > Yes or Ask first— to automatically connect to the PTT
service
Push to talk when roaming — to specify whether to allow PTT service outside your
home network.
Send my PTT address > No — to send or hide your address from others
■Configuration settings
You may receive the settings for connecting to the service from your service
provider. See Configuration settings service p. 8. You can enter the settings
manually. See Configuration p. 47.
To select the settings for connecting to the service, select Menu > Push to talk >
Configuration settings. Select from the following options:
Configuration — to select a service provider.
Account — to select a PTT service account in the active configuration settings
Other parameters are PTT user name, Default nickname, PTT password, Domain,
and Server address.
To access the internet site of your PTT provider, select Menu > Push to talk > Web.
13. Applications
In this menu you can manage applications and games. These files are
stored in the phone memory or an attached microSD memory card and may be
arranged in folders.
For options to format or lock and unlock the memory card see Memory card p. 50.
To launch a game, select Menu > Applications > Games, the desired game, and
Open.
FCC Draft
Model 3555
26 July 2007
63
To launch an application, select Menu > Applications > Collection, an application,
and Open.
The following application options are available:
Update version — to check whether a new version of the application is available
for download from Web (network service)
Web page — to provide further information for the application from an Internet
page (network service), if available
App. access — to restrict the application from accessing the network
Your phone supports J2ME Java applications. Make sure that the application is
compatible with your phone before downloading it. You can download new Java
applications and games in different ways.
Important: Only install and use applications and other software from sources that
offer adequate security and protection against harmful software.
To download an application, use the Nokia Application Installer from PC Suite, or
select Menu > Applications > Options > Downloads > App. downloads; the list of
available bookmarks is shown. See Bookmarks p. 65.
For the availability of different services and pricing contact your service provider.
Your phone may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does
not warrant or endorse these sites. If you choose to access them, you should take the same
precautions, for security or content, as you would with any internet site.
The third-party applications provided with your device may have been created and may be
owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the
copyrights or intellectual property rights to the third-party applications. As such, Nokia does
not take any responsibility for end-user support, functionality of the applications, or the
information in the applications or these materials. Nokia does not provide any warranty for
the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED
AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR
ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-
PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
FCC Draft
Model 3555
26 July 2007
64
14. SIM services
Your SIM card may provide additional services. You can access this
menu only if it is supported by your SIM card. The name and
contents of the menu depend on the available services.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider, network operator, or other vendor.
To set the phone to show you the confirmation messages sent between your
phone and the network when you are using the SIM services, select Menu >
Settings > Phone > Confirm SIM service actions > Yes.
Accessing these services may involve sending messages or making a phone call for
which you may be charged.
15. Web
You can access various mobile internet services with your phone
browser.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
Check the availability of these services, pricing, and instructions with your service
provider.
With the browser you can view the services that use wireless markup language
(WML) or extensible hypertext markup language (XHTML) on their pages.
Appearance may vary due to screen size. You may not be able to view all details of
the internet pages.
■Set up browsing
You may receive the configuration settings required for browsing as a
configuration message from your service provider. See Configuration settings
service p. 8. You can also enter all the configuration settings manually. See
Configuration p. 47.
■Connect to a service
Ensure that the correct configuration settings of the service are activated.
1. To select the settings for connecting to the service, select Menu > Web >
Settings > Configuration settings.
FCC Draft
Model 3555
26 July 2007
65
2. Select Configuration. Only the configurations that support browsing service
are shown. Select a service provider, Default, or Personal config. for browsing.
See Set up browsing p. 64.
3. Select Account and a browsing service account contained in the active
configuration settings.
4. Select Display terminal window > Yes to perform manual user authentication
for intranet connections.
Make a connection to the service in one of the following ways:
•Select Menu > Web > Home; or in the standby mode, press and hold 0.
• To select a bookmark of the service, select Menu > Web > Bookmarks.
• To select the last URL, select Menu > Web > Last web address.
• To enter the address of the service, select Menu > Web > Go to address. Enter
the address of the service, and select OK.
■Browse pages
After you make a connection to the service, you can start browsing its pages. The
function of the keys may vary in different services. Follow the text guides on the
phone display. For more information, contact your service provider.
To browse through the page, scroll in any direction.
To select an item, press the call key, or select Select.
To enter letters and numbers, press the 0 to 9 keys. To enter special characters,
press *.
While browsing, you can make a phone call, and save a name and a phone number
from a page.
■Bookmarks
You can save page addresses as bookmarks in the phone memory.
1. While browsing, select Options > Bookmarks; or in the standby mode, select
Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it, or press the call key to make a connection
to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; to create a new
bookmark; or to save the bookmark to a folder.
Your phone may have preinstalled bookmarks and links for third-party internet sites. You
may also access other third-party sites through your phone. Third-party sites are not
FCC Draft
Model 3555
26 July 2007
66
affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose
to access such sites, you should take precautions for security or content.
When you receive a bookmark that is sent as a bookmark, 1 bookmark received is
displayed. To view the bookmark, select Show.
■Appearance settings
While browsing, select Options > Other options > Appear. settings; or in the
standby mode, select Menu > Web > Settings > Appearance settings and from
the following options:
Text wrapping — to select how the text shall appear on the display
Font size — to set the font size
Show images > No — to hide images on the page
Alerts > Alert for unsecure connection > Yes — to set the phone to alert when a
secure connection changes to an unsecure one during browsing
Alerts > Alert for unsecure items > Yes — to set the phone to alert when a secure
page contains an unsecure item. These alerts do not guarantee a secure
connection. For more information, see Browser security p. 68.
Character encoding > Content encoding — to select the encoding for the browser
page content
Character encoding > Unicode (UTF-8) web addresses > On — to set the phone to
send a URL as a UTF-8 encoding
Screen size > Full or Small— to set the screen layout
Show page title > Yes or No— to display the title of the web page
JavaScript > Enable — to enable the Java scripts
■Security settings
Cookies
A cookie is data that a site saves in the cache memory of your phone. Cookies are
saved until you clear the cache memory. See Cache memory p. 68.
While browsing, select Options > Other options > Security > Cookie settings; or in
the standby mode, select Menu > Web > Settings > Security settings > Cookies.
To allow or prevent the phone from receiving cookies, select Allow or Reject.
FCC Draft
Model 3555
26 July 2007
67
Scripts over secure connection
You can select whether to allow the running of scripts from a secure page. The
phone supports WML scripts.
While browsing, to allow the scripts, select Options > Other options > Security >
WMLScript sett.; or in the standby mode, select Menu > Web > Settings >
Security settings > WMLScripts over secure connection > Allow.
■Download settings
To automatically save all downloaded files in Gallery, select Menu > Web >
Settings > Downloading settings > Automatic saving > On.
■Service inbox
The phone is able to receive service messages sent by your service provider
(network service). Service messages are notifications (for example, news
headlines), and they may contain a text message or an address of a service.
To access the Service inbox in the standby mode, when you have received a service
message, select Show. If you select Exit, the message is moved to the Service
inbox. To access the Service inbox later, select Menu > Web > Service inbox.
To access the Service inbox while browsing, select Options > Other options >
Service inbox. Scroll to the message you want, and to activate the browser and
download the marked content, select Retrieve. To display detailed information on
the service notification or to delete the message, select Options > Details or
Delete.
Service inbox settings
Select Menu > Web > Settings > Service inbox settings.
To set whether you want to receive service messages, select Service messages >
On or Off.
To set the phone to receive service messages only from content authors approved
by the service provider, select Message filter > On. To view the list of the approved
content authors, select Trusted channels.
To set the phone to automatically activate the browser from the standby mode
when the phone receives a service message, select Automatic connection > On. If
you select Off, the phone activates the browser only after you select Retrieve
when the phone has received a service message.
FCC Draft
Model 3555
26 July 2007
68
■Cache memory
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed is stored in the cache.
To empty the cache while browsing, select Options > Other options > Clear the
cache; in the standby mode, select Menu > Web > Clear the cache.
■Browser security
Security features may be required for some services, such as online banking or
shopping. For such connections you need security certificates and possibly a
security module, which may be available on your SIM card. For more information,
contact your service provider.
Security module
The security module improves security services for applications requiring a
browser connection, and allows you to use a digital signature. The security module
may contain certificates as well as private and public keys. The certificates are
saved in the security module by the service provider.
To view or change the security module settings, select Menu > Settings >
Security > Security module settings.
Certificates
Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be used
correctly in order to benefit from increased security. The existence of a certificate
does not offer any protection by itself; the certificate manager must contain
correct, authentic, or trusted certificates for increased security to be available.
Certificates have a restricted lifetime. If Expired certificate or Certificate not valid
yet is shown even if the certificate should be valid, check that the current date and
time in your phone are correct.
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
There are three kinds of certificates: server certificates, authority certificates, and
user certificates. You may receive these certificates from your service provider.
Authority certificates and user certificates may also be saved in the security
module by the service provider.
FCC Draft
Model 3555
26 July 2007
69
To view the list of the authority or user certificates downloaded into your phone,
select Menu > Settings > Security > Authority certificates or User certificates.
is displayed during a connection, if the data transmission between the
phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the gateway and the
content server (or place where the requested resource is stored) is secure. The service
provider secures the data transmission between the gateway and the content server.
Digital signature
You can make digital signatures with your phone if your SIM card has a security
module. Using the digital signature can be the same as signing your name to a
paper bill, contract, or other document.
To make a digital signature, select a link on a page, for example, the title of the
book you want to buy and its price. The text to sign, which may include the
amount and date, is shown.
Check that the header text is Read and that the digital signature icon is
shown.
If the digital signature icon does not appear, there is a security breach, and you
should not enter any personal data such as your signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll through
and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN. The digital
signature icon disappears, and the service may display a confirmation of your
purchase.
16. PC connectivity
You can send and receive e-mail, and access the Internet when your phone is
connected to a compatible PC through a Bluetooth or a data cable connection.
You can use your phone with a variety of PC connectivity and data
communications applications.
■Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do
notes between your phone and the compatible PC or a remote internet server
FCC Draft
Model 3555
26 July 2007
70
(network service). You may find more information and PC Suite on the Nokia
website at www.nokia.com/support or your local Nokia website.
■Packet data, HSCSD, and CSD
With your phone you can use the packet data, high-speed circuit switched data
(HSCSD), and circuit switched data (CSD, GSM data) data services. For availability
and subscription to data services, contact your network operator or service
provider. See Modem settings p. 43.
The use of HSCSD services consumes the phone battery faster than normal voice
or data calls.
■Bluetooth
Use the Bluetooth technology to connect your compatible PC to the internet. Your
phone must have activated a service provider that supports internet access and
your PC has to support Bluetooth PAN (personal area network). After connecting
to the network access point (NAP) service of the phone and pairing with your PC
your phone automatically opens a packet data connection to the internet. PC
Suite software installation is not necessary when using the NAP service of the
phone.
See Bluetooth wireless technology p. 41.
■Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
17. Battery information
■Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new battery is
achieved only after two or three complete charge and discharge cycles. The battery can be
charged and discharged hundreds of times, but it will eventually wear out. When the talk
and standby times are noticeably shorter than normal, replace the battery. Use only Nokia
FCC Draft
Model 3555
26 July 2007
71
approved batteries, and recharge your battery only with Nokia approved chargers
designated for this device.
If a replacement battery is being used for the first time or if the battery has not been used
for a prolonged period, it may be necessary to connect the charger and then disconnect and
reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do not leave
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If
left unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take a few minutes before the charging
indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery that is
damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct connection of the positive (+) and negative
(-) terminals of the battery. (These look like metal strips on the battery.) This might happen,
for example, when you carry a spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not
work temporarily, even when the battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when possible.
Do not dispose as household waste.
■Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original
Nokia battery, purchase it from an authorized Nokia dealer, and inspect the hologram label
using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of the battery.
If you have any reason to believe that your battery is not an authentic, original Nokia
battery, you should refrain from using it, and take it to the nearest authorized Nokia service
point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the
battery for authenticity. If authenticity cannot be verified, return the battery to the place of
purchase.
FCC Draft
Model 3555
26 July 2007
72
Authenticate hologram
1. When you look at the hologram on the label, you should
see the Nokia connecting hands symbol from one angle and
the Nokia Original Enhancements logo when looking from
another angle.
2. When you angle the hologram left, right, down and up,
you should see 1, 2, 3 and 4 dots on each side respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic
Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service
point or dealer for assistance. The use of a battery that is not approved by the manufacturer
may be dangerous and may result in poor performance and damage to your device and its
enhancements. It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
FCC Draft
Model 3555
26 July 2007
73
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with
care. The suggestions below will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, remove
the battery and allow the device to dry completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards
and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.
• Do not touch the main display with hard or angular materials. Objects like earrings or
jewelry may scratch the display.
• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and
light sensor lenses).
• Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the device and may violate regulations
governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as contacts and calendar notes)
before sending your device to a service facility.
• To reset the device from time to time for optimum performance, power off the device
and remove the battery.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest authorized service
facility for service.
FCC Draft
Model 3555
26 July 2007
74
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.
■Operating environment
Remember to follow any special regulations in force in any area, and always switch off your
device when its use is prohibited or when it may cause interference or danger. Use the device
only in its normal operating positions. This device meets RF exposure guidelines when used
either in the normal use position against the ear or when positioned at least 2.2 centimeters
(7/8 inch) away from the body. When a carry case, belt clip or holder is used for body-worn
operation, it should not contain metal and should position the device the above-stated
distance from your body.
To transmit data files or messages, this device requires a quality connection to the network.
In some cases, transmission of data files or messages may be delayed until such a
connection is available. Ensure that the above separation distance instructions are followed
until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic storage media near the device, because information
stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless devices, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately shielded from
external RF energy or if you have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of 15.3
centimeters (6 inches) should be maintained between a wireless device and an implanted
medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who have such devices should:
• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical
device when the wireless device is turned on.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical device to minimize the potential
for interference.
FCC Draft
Model 3555
26 July 2007
75
• Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
• Read and follow the directions from the manufacturer of their implanted medical device.
If you have any questions about using your wireless device with an implanted medical
device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference occurs,
consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag systems. For more
information, check with the manufacturer or its representative of your vehicle or any
equipment that has been added.
Only qualified personnel should service the device, or install the device in a vehicle. Faulty
installation or service may be dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with great force. Do not place objects,
including installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device before
boarding an aircraft. The use of wireless devices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey
all signs and instructions. Potentially explosive atmospheres include areas where you would
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Switch off the device at refueling
points such as near gas pumps at service stations. Observe restrictions on the use of radio
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats, chemical transfer or storage
facilities and areas where the air contains chemicals or particles such as grain, dust, or metal
powders. You should check with the manufacturers of vehicles using liquefied petroleum gas
(such as propane or butane) to determine if this device can be safely used in their vicinity.
FCC Draft
Model 3555
26 July 2007
76
■Emergency calls
Important: Wireless devices, including this device, operate using radio signals,
wireless networks, landline networks, and user-programmed functions. Because of
this, connections in all conditions cannot be guaranteed. You should never rely
solely on any wireless device for essential communications like medical
emergencies.
To make an emergency call
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the device.
2. Press the end key as many times as needed to clear the display and ready the device for
calls.
3. Enter the official emergency number for your present location. Emergency numbers vary
by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before you can
make an emergency call. If the device is in the flight mode, you must change the profile to
activate the device function before you can make an emergency call. Consult this guide or
your service provider for more information.
When making an emergency call, give all the necessary information as accurately as
possible. Your wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by international guidelines. These guidelines
were developed by the independent scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using
standard operating positions with the device transmitting at its highest certified power level
in all tested frequency bands. The actual SAR level of an operating device can be below the
maximum value because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how close you are
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the
device at the ear is X.XX W/kg.
Use of device accessories and enhancements may result in different SAR values. SAR values
may vary depending on national reporting and testing requirements and the network band.
Additional SAR information may be provided under product information at www.nokia.com.
FCC Draft
Model 3555
26 July 2007
77
Your mobile device is also designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA) and Industry Canada. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certification for use at the ear is 0.94 W/
kg and when properly worn on the body is 0.75 W/kg. Information about this device model
can be found at http://www.fcc.gov/oet/fccid by searching the equipment authorization
system using FCC ID: QMNRM-270.
FCC Draft
Model 3555
26 July 2007
78
Index
A
access codes 20
accessories. See enhancements.
activation keys 49
active standby 17, 40
alarm clock 55
antenna 14
applications
audio messages 26
B
barring password 20
battery
authentication 72
charging 12
charging, discharging 71
installation 9
Bluetooth 41, 70
bookmarks 66
browser 65, 66, 67
business cards 38
C
cache memory 68
calculator 56
calendar 55, 56
call
functions 20
log 39
options 22
settings 45
waiting 22
call register. See call log.
calls 20, 21
camera
effects 52
filter 52
settings 52
take an image 51
certificates 69
character case 22
charge the battery 12
clock settings 40
codes 20
configuration 47
setting service 8
settings 13
contact information 9
contacts 36, 37, 38
cookies 67
countdown timer 57
customer service 9
D
data
communication 71
transfer 43
data cable 45
date settings 40
digital rights management 49
digital signature 69
display 16, 17
downloads 8, 67
E
EGPRS 41
e-mail application 27
emergency calls 76
end
call 20
enhancements 7, 46
equalizer 54
explosive environments 75
F
factory settings 49
flash messages 26
font size 40
G
gallery 49
games 63
GPRS 43
H
handsfree. See loudspeaker.
hearing aid 47, 75
I
image 51
IMAP4 27
indicators 17
FCC Draft
Model 3555
26 July 2007
79
installation
battery 9
SIM card 9
instant messaging 29
internet 64
K
keyguard 19
keypad lock 19
keys 19
L
language settings 46
lights 47
log 39
loudspeaker 22
M
main display 17, 40
maintenance 73
memory card 50
menu 16
message center number 24
message settings 33, 34, 35
messages
audio message 26
flash message 26
length indicator 24
message settings 33
text 24
voice message 32
mini display 16, 40
MMS. See multimedia messages.
multimedia messages 25
music player 53
N
navigation 16
network
name on display 16, 17
services 6
network mode 16, 17
Nokia contact information 9
notes 56
numbers 38
O
offline mode 19
organizer 55
overview functions 8
P
packet data 43, 70
parts 15
PC connectivity 70
PC Suite 70
phone
configuration 47
keys 15
open 13
parts 15
settings 46
phone lock. See keypad lock.
PictBridge 45
PIN codes 13, 20
plug and play service 13
POP3 27
predictive text input 23
profiles 39
protected files 49
PTT 58
PUK codes 20
Push to talk. See PTT.
pushed messages 67
R
recorder 54
ringing tones 39
S
safety information 5, 74
SAR 76
scrolling 16
security
codes 20
module 68
settings 48
service
inbox 67
messages 67
numbers 38
services 64
settings
active standby 40
call 45
camera 52
clock 40
configuration 47
connectivity 41
FCC Draft
Model 3555
26 July 2007
80
data transfer 43
date 40
downloads 67
enhancements 46
fold animation 40
GPRS 43
main display 40
messages 33
mini display 40
my shortcuts 41
phone 46
profiles 39
PTT 62
PTT configuration 62
restore factory settings 49
security 48
service inbox 68
themes 39
time 40
tones 39
USB data cable 45
wallpaper 40
shared memory 6
shortcuts 41
signal strength 16, 17
SIM
card 19
card installation 9
services 64
SIM card 19
SMS. See text messages
speed dialing 21, 38
standby mode 16, 41
status indicators 16, 17
stopwatch 57
strap 14
switch on and off 13
synchronization 43
T
take an image 51
text 22, 23
text message 24
themes 39
time settings 40
to-do list 56
tones 39
traditional text input 23
U
unlock keypad 19
UPIN 13
V
vehicles 75
voice
commands 41
dialing 21
messages 32
recorder 54
W
wallpaper 40
Web 64, 65
wireless markup language 65
wrist strap 14
write text 22
X
XHTML 65
FCC Draft
Model 3555
26 July 2007