Microsoft RM-276 GSM850/900/1800/1900 WCDMA Cellular Phone w/BT User Manual Manual
Microsoft Mobile Oy GSM850/900/1800/1900 WCDMA Cellular Phone w/BT Manual
Manual
1
Nokia 6555 User Guide
MODEL: 6555c
FCC Draft
2
Issue 1, Part No. 9201381
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-276 product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. A copy of the
Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/.
Copyright © 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, NaviTM, and Nokia Original Enhancements logo are
trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of
Nokia Corporation. Other product and company names mentioned herein may be trademarks
or tradenames of their respective owners.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C)
1997-2007. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA
Security.
Java is a trademark of Sun Microsystems, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial
activity and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information
including that relating to promotional, internal and commercial uses may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes
and improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR
0434
FCC Draft
3
INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may
vary by region. Please check with the Nokia dealer for details, and availability of language
options.
Export controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user's authority to operate this equipment.
FCC Draft
Contents
4
Contents
For your safety.................................................................................................... 5
1. Get started ................................................................................................... 10
2. Your phone................................................................................................... 20
3. Call functions.............................................................................................. 25
4. Write text..................................................................................................... 27
5. Navigate the menus .................................................................................. 29
6. Messaging .................................................................................................... 31
7. Contacts........................................................................................................ 41
8. Log.................................................................................................................. 44
9. Settings........................................................................................................ 45
10. Gallery......................................................................................................... 57
11. Push to talk ............................................................................................... 58
12. Media .......................................................................................................... 64
13. Organizer.................................................................................................... 68
14. Instant messaging ................................................................................... 72
15. Applications............................................................................................... 75
16. SIM services .............................................................................................. 78
17. Web.............................................................................................................. 79
18. PC connectivity ........................................................................................ 85
19. Battery information ................................................................................ 86
Index ....................................................................................................................94
FCC Draft
For your safety
5
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in
progress.
USE SENSIBLY
Use only in the positions as explained in the product documentation.
Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
FCC Draft
For your safety
6
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is switched on and in
service. Press the end key as many times as needed to clear the
display and return to the standby mode. Enter the emergency
number, then press the call key. Give your location. Do not end the
call until given permission to do so.
■About your device
The wireless device described in this guide is approved for use on the WCDMA
850 and 1900, EGSM 850 and 900, and GSM 1800 and 1900 networks. Contact
your service provider for more information about networks.
When using the features in this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred, or forwarded.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■Network services
To use the phone you must have service from a wireless service provider. Many of
the features require special network features. These features are not available on
all networks; other networks may require that you make specific arrangements
with your service provider before you can use the network services. Your service
provider can give you instructions and explain what charges will apply. Some
networks may have limitations that affect how you can use network services. For
instance, some networks may not support all language-dependent characters
and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device
menu. Your device may also have a special configuration such as changes in
menu names, menu order, and icons. Contact your service provider for more
information.
FCC Draft
General information
7
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as multimedia messaging (MMS),
browsing, e-mail application, instant messaging, presence enhanced contacts,
remote synchronization, and content downloading using the browser or MMS,
require network support for these technologies.
■Shared memory
The following features in this device may share memory: gallery, contacts, text
messages, multimedia messages, and instant messages, e-mail, calendar, to-do
notes, JavaTM games and applications, and note application. Use of one or more of
these features may reduce the memory available for the remaining features
sharing memory. For example, saving many Java applications may use all of the
available memory. Your device may display a message that the memory is full
when you try to use a shared memory feature. In this case, delete some of the
information or entries stored in the shared memory features before continuing.
■Enhancements
A few practical rules about accessories and enhancements
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
General information
■Overview of functions
Your phone provides many functions that are practical for daily use,
such as text and multimedia messaging, calendar, clock, alarm clock,
radio, music player, and built-in camera. Your phone also supports the
following functions:
• Plug and play online service to get the configuration settings. See
Plug and play service, 16 and Configuration settings service, 9.
• Active standby. See Active standby, 22.
FCC Draft
General information
8
• Audio messaging. See Nokia Xpress audio messaging, 34.
• Instant messaging. See Instant messaging, 72.
• E-mail application. See E-mail application, 35.
• Enhanced voice dialing. See Enhanced voice dialing, 26 and Voice
commands, 48.
• Java 2 Platform, Micro Edition (J2METM). See Applications, 75.
■Access codes
Security code
The security code (5 to 10 digits) helps to protect your phone against
unauthorized use. The preset code is 12345. To change the code, and to
set the phone to request the code, see Security, 56.
PIN codes
The personal identification number (PIN) code and the universal
personal identification number (UPIN) code (4 to 8 digits) help to
protect your SIM card against unauthorized use. See Security, 56.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is
required for some functions.
The module PIN is required to access the information in the security
module. See Security module, 83.
The signing PIN is required for the digital signature. See Digital
signature, 84.
PUK codes
The personal unblocking key (PUK) code and the universal personal
unblocking key (UPUK) code (8 digits) is required to change a blocked
PIN code and UPIN code, respectively. The PUK2 code (8 digits) is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for the codes.
Restriction password
The restriction password (4 digits) is required when using the Call
restrictions. See Security, 56.
FCC Draft
General information
9
■Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, Nokia Xpress audio messaging, or remote Internet server
synchronization, your phone needs the correct configuration settings.
For more information on availability, contact your network operator,
service provider, nearest authorized Nokia dealer, or visit the support
area on the Nokia Web site, www.nokia.com/support.
When you have received the settings as a configuration message, and
the settings are not automatically saved and activated, Configuration
sett. received %U is displayed.
To save the settings, select Show > Save. If required, enter the PIN code
supplied by the service provider.
To discard the received settings, select Exit or Show > Discard.
■Download content
You may be able to download new content (for example, themes) to the
phone (network service).
For the availability of different services and pricing, contact your service
provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■Nokia support
Check www.nokia.com/support or your local Nokia website for the latest
version of this guide, additional information, downloads, and services
related to your Nokia product.
On the website, you can get information on the use of Nokia products
and services. If you need to contact customer service, check the list of
local Nokia Care contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia service center at
www.nokia.com/repair.
FCC Draft
Get started
10
1. Get started
■Install SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
This device is intended for use with BL-5C battery. Always use original
Nokia batteries. See Nokia battery authentication, 87.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
Always switch off the power and disconnect the charger and any other
device before removing the covers. Avoid touching electronic
components while changing the covers. Always store and use the device
with the covers attached.
Warning: Use only batteries, chargers, and enhancements
approved by Nokia for use with this particular model. The use of
any other types may invalidate any approval or warranty, and
may be dangerous.
To remove the back cover of
the phone, press sightly (1)
and slide the cover (2).
FCC Draft
Get started
11
Remove the battery as shown.
To open the SIM card holder,
press slightly (1) and lift the
holder (2).
Insert the SIM card properly
into the holder.
Close the SIM card holder.
FCC Draft
Get started
12
Replace the battery and the
back cover (1).
Slide the back cover into
place (2).
■Insert a microSD card
Keep all microSD memory cards out of the reach of small children.
A microSD card can be loaded with ringing tones,
themes, tones, images and videos. If you delete, reload,
or replace this card, these functions and features may
not function properly.
Use only compatible microSD cards with this device. Other memory cards, such as
Reduced Size MultiMedia cards, do not fit in the microSD card slot and are not
compatible with this device. Using an incompatible memory card may damage
the memory card as well as the device, and data stored on the incompatible card
may be corrupted.
Use only microSD cards approved by Nokia for use with this device. Nokia utilizes
the approved industry standards for memory cards but not all other brands may
function correctly or be fully compatible with this device.
FCC Draft
Get started
13
1. Remove the back
cover and the
battery of the
phone. Slide the
microSD memory
card holder down
(1) and flip the
card holder up (2).
2. Insert the card
into the memory
card holder with
the gold-colored
contact area
facing up (3).
3. Close the card
holder (4 and 5),
reinsert the
battery and slide the back cover back in place.
Memory card
Keep all memory cards out of the reach of small children.
You can use the microSD memory card to store your multimedia files
such as video clips, music tracks, and sound files, images, and messaging
data, and to back up information from phone memory.
Some of the folders in Gallery with content that the phone use, for
example, Themes, may be stored on a memory card.
To insert and remove the microSD memory card see Insert a microSD
card, 12.
Format the memory card
When a memory card is formatted, all data on the card is permanently
lost. Some memory cards are supplied preformatted and others require
formatting. Consult your retailer to find out if you must format the
memory card before you can use it.
FCC Draft
Get started
14
To format a memory card, select Menu >Gallery or Applications, the
memory card folder , Options > Format mem. card > Yes.
When formatting is complete, enter a name for the memory card. An
unformatted memory card may have NO NAME listed instead of Memory
card.
Lock the memory card
To set a password to lock your memory card to help prevent
unauthorised use, select Options > Menu > Gallery or Applications >
the memory card folder > Set password. The password can be up to
eight characters long.
The password is stored in your phone and you do not have to enter it
again while you are using the memory card on the same phone. If you
want to use the memory card on another phone, you are asked for the
password. To delete the password, select Options > Delete password.
Check memory consumption
To check the memory consumption of different data groups and the
available memory for installing new applications or software on your
memory card, select Options > Details.
■Charge the battery
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from an AC-3, AC-4, or AC-5 charger.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
FCC Draft
Get started
15
1. Connect the charger to a wall
socket.
2. Connect the charger to your
phone.
A CA-44 charging adapter can
be used with older charger
models.
If the battery is completely
discharged, it may take a few minutes before the charging indicator
appears on the display or before any calls can be made.
The charging time depends on the charger used. Charging a BL-5C
battery with the AC-4 charger takes approximately 1 hour and
30 minutes while the phone is in the standby mode.
■Open and close the phone
You open and close the phone manually. When you open the fold of the
phone, it opens up to approximately 165 degrees. Do not try to force the
fold open more.
Depending on the Theme a tone sounds when you open and close the
phone.
FCC Draft
Get started
16
■Switch the phone on and off
Warning: Do not switch the phone on
when wireless phone use is prohibited or
when it may cause interference or
danger.
To switch the phone on or off, press and
hold the power key. See Keys and parts, 20.
If the phone asks for a PIN or a UPIN code,
enter the code (displayed as ****), and select
OK.
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of the
time difference with respect to Greenwich Mean Time (GMT), and enter
the date. See Date and time, 47.
Plug and play service
When you switch on your phone for the first time, and the phone is in
the standby mode, you are asked to get the configuration settings from
your service provider (network service). Confirm or decline the query.
See Configuration settings service, 9.
■Connect a headset
You can connect a
Nokia 2.5 mm headset
to your device.
Connect the headset
to the device as
shown.
FCC Draft
Get started
17
■Connect your phone and PC
The CA-101 data
cable is used for
data transfer and
synchonising your
phone and PC.
See Data transfer,
51 for more
information. You
must download
Nokia PC Suite to
use with your device. Go to www.nokia.com/support for more
information.
1. Connect the lead from the CA-101 to the micro USB socket on the
lower left side of your phone.
2. Connect the CA-101 to your PC or laptop. USB data cable connected.
Select mode. appears on the display screen of your phone.
3. Select OK and Default mode.
■Antenna
Your device has an
internal antenna
located at the
bottom of the
device. Avoid
contact with the
antenna area.
FCC Draft
Get started
18
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with the
antenna affects call quality and may cause the
device to operate at a higher power level than
otherwise needed. Avoiding contact with the
antenna area when operating the device
optimizes the antenna performance and the
battery life.
■Phone strap
Remove the back cover of the
phone. Insert a thread through
the eyelet. Place the thread
around the post of the phone as
shown in the picture. Tighten
the thread. Put the back cover
back in place.
■Digital rights management
Content owners may use different types of digital rights management
(DRM) technologies to protect their intellectual property, including
copyrights. This device uses various types of DRM software to access
DRM-protected content. With this device you may be able to access
content protected with WMDRM 10. If certain DRM software fails to
protect the content, content owners may ask that such DRM software’s
ability to access the new DRM-protected content be revoked.
Revocation may also prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM software does not affect
the use of content protected with other types of DRM or the use of non-
DRM-protected content.
Digital rights management (DRM) protected content comes with an
associated activation key that defines your rights to use the content. If
your device has WMDRM protected content, both the activation keys
FCC Draft
Get started
19
and the content will be lost if the device memory is formatted. You may
also lose the activation keys and the content in case the files on your
device get corrupted. Losing the activation keys or the content may limit
your ability to use the same content on your device again. For more
information, contact your service provider.
FCC Draft
Your phone
20
2. Your phone
■Keys and parts
1) Earpiece 8) Volume key
2) Main display 9) USB connector
3) NaviTM key 10) Charger connector
4) Right selection key 11) Call key
5) End key and power key 12) Left selection key
6) Key pad 13) Universal headset connector
7) Camera key or PTT key if PTT is
activated
14) Mini display
FCC Draft
Your phone
21
■Standby mode
When the phone is ready for use, and you have not entered any
characters, the phone is in the standby mode.
Mini display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6 Clock and date or profile
Analog clock
The Mini display settings include a screensaver to
display an analog clock. To show the clock, select
Menu > Settings > Mini display > Screen saver >
Analog clock. The time-out default to display the
clock after closing the fold is ten seconds. To display
the clock sooner, select Menu > Settings > Mini
display > Screen saver > Time-out and set the time
to five seconds.
FCC Draft
Your phone
22
Main display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6Clock
7Main display
8The left selection key is Go to or a shortcut to
another function. See Left selection key, 47.
9The middle selection key mode is Menu.
10 The right selection key may be Names to access the list of contacts in
the Contacts menu, an operator-specific name to access an operator-
specific website, or a shortcut to a function that you selected. See Right
selection key, 47.
Active standby
In the active standby mode there is a list of selected phone features and
information on the screen that you can directly access in the standby
mode. To switch on or off the mode, select Menu > Settings > Main
display > Active standby > Active standby mode > On or Off.
In the active standby mode, scroll up or down to navigate the list. Left
and right arrows at the beginning and end of a line indicate that further
information is available by scrolling left or right. To end the active
standby navigation mode, select Exit.
To organize and change the active standby mode, activate the
navigation mode, and select Options > Customize view.
FCC Draft
Your phone
23
Indicators
You have unread messages.
You have new voice mail.
You have unsent, canceled or failed messages.
The phone registered a missed call.
, Your phone is connected to the instant messaging service, and
the availability status is online or offline.
You received one or several instant messages.
The keypad is locked.
The phone does not ring for an incoming call or text message.
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running.
The phone is registered to the GPRS or EGPRS network.
A GPRS or EGPRS connection is established.
The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
, Push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to
the phone.
Calls are limited to a closed user group.
The timed profile is selected.
FCC Draft
Your phone
24
, , , or
A headset, handsfree, loopset, or music stand enhancement is
connected to the phone.
■Flight mode
You can deactivate all radio frequency functions and still have access to
offline games, calendar, and phone numbers. Use the flight mode in
radio sensitive environments—on board aircraft or in hospitals. When
the flight mode is active, is shown.
Select Menu > Settings > Profiles > Flight > Activate or Customize.
To deactivate the flight mode, select any other profile.
In the flight mode you can make an emergency call. Enter the
emergency number, press the call key, and select Yes when asked Exit
flight profile? The phone attempts to make an emergency call.
When the emergency call ends, the phone automatically changes to the
normal profile mode.
Warning: With the flight mode profile, you cannot make or
receive any calls, including emergency calls, or use other
features that require network coverage. To make calls, you must
first activate the phone function by changing profiles. If the
device has been locked, enter the lock code. If you need to make
an emergency call while the device is locked and in the flight
profile, you may be also able to enter an official emergency
number programmed in your device in the lock code field and
select Call. The device will confirm that you are about to exit
flight profile to start an emergency call.
FCC Draft
Call functions
25
■Keypad lock (keyguard)
Select Menu or Unlock (1), and press * (2)
within 1.5 seconds to lock or unlock the
keypad.
If the security keyguard is activated, enter
the security code if requested.
To answer a call when the keyguard is on,
press the call key or open the phone. When
you end or reject the call, the keypad
automatically locks.
For Security keyguard, see Phone, 53.
When the keyguard is on, calls still may be
possible to the official emergency number programmed into your device.
■Functions without a SIM card
Several functions of your phone may be used without installing a SIM
card (for example, the data transfer with a compatible PC or another
compatible device). Without a SIM card, some functions appear dimmed
in the menus and cannot be used.
For an emergency call, some networks may require that a valid SIM card is
properly inserted in the device.
3. Call functions
■Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the
+ character replaces the international access code), enter the
country code, the area code without the leading 0, if necessary, and
the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to
decrease press the volume down key.
FCC Draft
Call functions
26
3. To end the call or to cancel the call attempt, press the end key, or
close the phone.
To search for a name or phone number that you have saved in Contacts,
see Search for a contact, 41. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the
standby mode. To call the number, select a number or name, and press
the call key.
1-touch dialing
Assign a phone number to one of the sped dialing keys, 2 to 9. See 1-
touch dialing, 44. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch dialing key
until the call begins. See Speeding dialing in Call, 53.
Enhanced voice dialing
You can say the name saved in the contact list of the phone to make a
phone call. Voice commands are not language-dependent. To set the
language, see Voice recognition language in Phone, 53.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
1. In the standby mode, press and hold the volume down key. A short
tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was
successful, a list with matches is shown. The phone plays the voice
command of the match on the top of the list. If the result is not the
correct one, scroll to another entry.
Using voice commands to carry out a selected phone function is
similar to voice dialing. See Voice commands in My shortcuts, 47.
■Answer or decline a call
To answer an incoming call, press the call key, or open the phone. To end
the call, press the end key or close the phone.
FCC Draft
Write text
27
To decline an incoming call, press the end key or close the phone. To
reject an incoming call when the phone is closed, press and hold a
volume key.
To mute the ringing tone, press a volume key when the phone is closed,
or select Silence when the phone is open.
Call waiting
To answer the waiting call during an active call, press the call key. The
first call is put on hold. To end the active call, press the end key.
To activate the Call waiting function, see Call, 53.
■Options during a voice call
Many of the options that you can use during a call are network services.
For availability, contact your service provider.
During a call, select Options and from the following:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Loudspeaker or Handset.
Network services options are Answer or Decline, Hold or Unhold, New
call, Add to conference, End call, End all calls, and the following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer calls — to connect a call on hold to an active call and
disconnect yourself
Conference — to make a conference call of up to five persons
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
4. Write text
You can enter text (for example, when writing messages) using
traditional or predictive text input. When you write text, text input
indicators appear at the top of the display. indicates traditional text
FCC Draft
Write text
28
input. indicates predictive text input. Predictive text input allows
you to write text quickly using the phone keypad and a built-in
dictionary. You can enter a letter with a single keypress. indicates
predictive text input with Word suggestions. The phone predicts and
completes the word before you enter all the characters.
, , or appears next to the text input indicator, indicating the
character case. To change the character case, press #.
indicates number mode. To change from the letter to number mode,
press and hold #, and select Number mode.
To set the writing language while writing text, select Options > Writing
language.
■Predictive text input
To set predictive text input on, select Options > Prediction options >
Prediction > On.
Tip: To quickly set predictive text input on or off when writing
text, press # twice, or select and hold Options.
To select the prediction input type, select Options > Prediction
options> Prediction type > Normal or Word suggestions.
1. Start writing a word using the 2 to 9 keys. Press each key only once
for one letter. The entered letters are displayed underlined.
If you selected Word suggestions as prediction type, the phone starts
to predict the word you are writing. After you enter a few letters, and
if these entered letters are not a word, the phone tries to predict
longer words. Only the entered letters are displayed underlined.
To insert a special character, press and hold *, or select Options >
Insert symbol. Scroll to a character, and select Insert.
To write compound words, enter the first part of the word; to confirm
it, press the scroll key right. Write the next part of the word and
confirm the word.
To enter a full stop, press 1.
2. When you finish writing the word and it is correct, to confirm it,
press 0 to add space.
FCC Draft
Navigate the menus
29
If the word is not correct, press * repeatedly. When the word that you
want appears, select the word.
If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
select Spell. Complete the word (traditional text input is used), and
select Save.
■Traditional text input
To set traditional text input on, select Options > Prediction
options >Prediction > Off.
Press a number key, 1 to 9, repeatedly until the desired character
appears. Not all characters available under a number key are printed on
the key. The characters available depend on the selected writing
language.
If the next letter you want is located on the same key as the present one,
wait until the cursor appears.
The most common punctuation marks and special characters are
available under the 1 key. For more characters, press *.
5. Navigate the menus
The phone offers you an extensive range of functions, which are
grouped into menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List or
Grid.
To rearrange the menu, scroll to the menu you want to move, and
select Options > Organize > Move. Scroll to where you want to
move the menu, and select OK. To save the change, select Done >
Yes.
2. Scroll through the menu, and select an option (for example,
Settings).
FCC Draft
Navigate the menus
30
3. If the selected menu contains further submenus, select the one you
want (for example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu,
select Exit.
FCC Draft
Messaging
31
6. Messaging
You can read, write, send, and save text, multimedia, e-
mail, audio, and flash messages. All messages are organized into folders.
■Text messages
With the short message service (SMS) you can send and receive text
messages, and receive messages that can contain pictures (network
service).
Before you can send any text or SMS e-mail messages, you must save
your message center number. See Message settings, 38.
To check SMS e-mail service availability and to subscribe to the service,
contact your service provider. To save an e-mail address in Contacts, see
Save details, 42.
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. Characters that use accents or
other marks, and characters from some language options like Spanish, take up
more space limiting the number of characters that can be sent in a single
message.
An indicator at the top of the display shows the total number of
characters left and the number of messages needed for sending. For
example, 673/2 means that there are 673 characters left and that the
message is sent as a series of two messages.
Note: When the phone is sending the message, the animated is
shown. This is an indication that the message has been sent by your
device to the message center number programmed into your device.
This is not an indication that the message has been received at the
intended destination. For more details about messaging services, check
with your service provider.
Write and send a message
1. Select Menu > Messaging > Create message > Message.
FCC Draft
Messaging
32
2. Enter one or more phone numbers or e-mail addresses in the To: field.
To retrieve a phone number or e-mail address from a memory, select
Add.
3. Write your message in the Text: field.
4. To send the message, select Send. See Message sending, 33.
Read and reply to a message
1. To view a received message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox.
2. To reply to a message, select Reply. Write the reply message.
3. To send the message, select Send. See Message sending, 33.
■Multimedia messages
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving
device.
A multimedia message can contain some attachments.
To check availability and to subscribe to the multimedia messaging
network service, contact your service provider.
Write and send a multimedia message
The wireless network may limit the size of multimedia messages. If the inserted
image exceeds this limit, the device may make it smaller so that it can be sent by
multimedia messaging service (MMS).
1. Select Menu > Messaging > Create message > Message > Options >
Change to multim..
2. Write your message. To add a file, scroll to the icons at the bottom of
the display and find the type of file you want and select Insert.
3. To view the message before sending it, select Options > Preview.
4. To send the message, select Send. See Message sending, 33.
5. Enter one or more phone numbers or e-mail addresses in the To: field.
To retrieve a phone number or e-mail address from a memory, select
Add.
6. To send the message, select Send. See Message sending, 33.
FCC Draft
Messaging
33
Message sending
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
To send the message, select Send. The phone saves the message in the
Outbox folder, and the sending starts.
Note: When the phone is sending the message, the animated is
shown. This is an indication that the message has been sent by your
device to the message center number programmed into your device.
This is not an indication that the message has been received at the
intended destination. For more details about messaging services, check
with your service provider.
If an interruption occurs while the message is being sent, the phone
tries to resend the message a few times. If these attempts fail, the
message remains in the Outbox folder. To cancel the sending of the
messages in the Outbox folder, scroll to the desired message, and select
Options > Cancel sending.
Read and reply to a message
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
1. To view a received message, select Show. To view it later, select Exit.
2. To view the whole message if the received message contains a
presentation, select Play.
To view the files in the presentation or the attachments, select
Options > Objects or Attachments.
3. To reply to the message, select Options > Reply > Message, E-mail
message, Flash message, or Audio message. Write the reply message.
4. To send the message, select Send.
■Flash messages
Flash messages are text messages instantly displayed upon reception.
Flash messages are not automatically saved.
FCC Draft
Messaging
34
Write a message
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number and write your message. To insert a blinking
text into the message, select Options > Insert symbol > Blink character
to set a marker. The text behind the marker blinks until a second marker
is inserted.
Receive a message
A received flash message is indicated with Message: %U and a few
words from the beginning of the message. To read the message, select
Read. To extract numbers and addresses from the current message,
select Options > Use detail. To save the message, select Save and the
folder in which you want to save it.
■Nokia Xpress audio messaging
You can use the MMS to create and send a audio message in a
convenient way. MMS must be activated before you can use audio
messages.
Create a message
1. Select Menu > Messaging > Create message > Audio message. The
recorder opens. To use the recorder, see Voice recorder, 67.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to
retrieve a number.
4. To send the message, select Send.
Listen to a message
To open a received audio message, select Play. If more than one message
is received, select Show > Play. To listen to the message later, select
Exit.
■Memory full
When you receive a message, and the memory for the messages is full,
Memory full. Unable to receive msgs. is shown. To first delete old
messages, select OK > Yes and the folder. Scroll to the desired message,
FCC Draft
Messaging
35
and select Delete. If more messages are to be deleted, select Mark. Mark
all the messages you want to delete, and select Options > Delete
marked.
■Folders
The phone saves received messages in the Inbox folder.
Messages that have not yet been sent are saved in the Outbox folder.
To set the phone to save the sent messages in the Sent items folder, see
Save sent messages in General settings, 38.
To edit and send messages that you have written and saved in the Drafts
folder, select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organize your
Saved items subfolders, select Menu > Messaging > Saved items. To add
a folder, select Options > Add folder. To delete or rename a folder, scroll
to the desired folder, and select Options > Delete folder or Rename
folder.
Your phone has templates. To create a new template, save a message as
a template. To access the template list, select Menu > Messaging >
Saved items > Templates.
■E-mail application
The e-mail application uses a packet data connection (network service)
to allow you to access your e-mail account. This e-mail application is
different from the SMS e-mail function. To use the e-mail function on
your phone, you need a compatible e-mail system.
You can write, send, and read e-mail with your phone. Your phone
supports POP3 and IMAP4 e-mail servers. This application does not
support keypad tones.
Before you can send and retrieve any e-mail messages, you must obtain
a new e-mail account or use your current account. To check the
availability of your e-mail account, contact your e-mail service provider.
Check your e-mail settings with your e-mail service provider. You may
receive the e-mail configuration settings as a configuration message.
See Configuration settings service, 9.
FCC Draft
Messaging
36
To activate the e-mail settings, select Menu > Messaging > Message
settings > E-mail messages. See E-mail messages, 41.
Setting wizard
The setting wizard will start automatically if no e-mail settings are
defined in the phone. To enter the settings manually, select Menu >
Messaging > E-mail mailbox > Options > Yes > Create manually.
The Manage accounts options allow you to add, delete, and change the
e-mail settings. Make sure that you have defined the correct preferred
access point for your operator. See Configuration, 55.
The e-mail application requires an Internet access point without a
proxy. WAP access points normally include a proxy and do not work with
the e-mail application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail
service; or connect to the service first, then write and send your e-mail.
1. Select Menu > Messaging > E-mail message.
2. If more than one e-mail account is defined, select the account from
which you want to send the e-mail.
3. Enter the recipient’s e-mail address, write the subject, and enter the
e-mail message. To attach a file from Gallery, select Options >
Insert.
4. To send the e-mail message, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select
Send > Send later.
To edit or continue writing your e-mail later, select Options > Save
as draft. The e-mail is saved in Outboxes > Drafts.
To send the e-mail later, select Menu > Messaging > E-mail >
Options > Send now or Send/check e-mail.
Download e-mail
1. To download e-mail messages that have been sent to your e-mail
account, select Menu > Messaging > E-mail > Check new e-mail.
FCC Draft
Messaging
37
If more than one e-mail account is defined, select the account from
which you want to download the e-mail.
The e-mail application only downloads e-mail headers at first.
2. Select Back > Inboxes, the account name, and the new message, and
select Retrieve to download the complete e-mail message.
To download new e-mail messages and to send e-mail that has been
saved in the Outbox folder, select Options > Send/check e-mail.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail messages
may contain malicious software or otherwise be harmful to your device
or PC.
1. Select Menu > Messaging > E-mail > Inboxes, the account name,
and the desired message.
2. To reply to an e-mail, select Reply > Original text or Empty message.
To reply to many, select Options > Reply to all. Confirm or edit the e-
mail address and subject, then write your reply.
3. To send the message, select Send > Send now.
E-mail folders
Your phone saves e-mail that you have downloaded from your e-mail
account in the Inboxes folder. The Outboxes folder contains the
following folders: “Account name” for incoming e-mail, Archive for
archiving e-mail, Custom 1—Custom 3 for sorting e-mail, Junk where all
spam e-mail is stored, Drafts for saving unfinished e-mail, Outbox for
saving e-mail that has not been sent, and Sent items for saving e-mail
that has been sent.
To manage the folders and their e-mail content, select Options to view
the available options of each folder.
Spam filter
To activate and define a spam filter, select Options > Spam filter >
Settings in the main e-mail idle screen. The spam filter allows you to put
specific senders on a black or white list. Black list sender messages are
filtered to the Junk folder. Unknown and white list sender messages are
FCC Draft
Messaging
38
downloaded into the account inbox. To blacklist a sender, select the e-
mail message in the Inboxes folder and Options > Blacklist sender.
■Voice messages
The voice mailbox is a network service and you may need to subscribe to
it. For more information contact your service provider.
To call your voice mailbox, select Menu > Messaging > Voice
messages > Listen to voice msgs. To enter, search for, or edit your voice
mailbox number, select Voice mailbox number.
If supported by the network, indicates new voice messages. To call
your voice mailbox number, select Listen.
■Info messages
You can receive messages on various topics from your service provider
(network service). For more information, contact your service provider.
Select Menu > Messaging > Info messages.
■Service commands
Write and send service requests (also known as USSD commands), such
as activation commands for network services, to your service provider.
Select Menu > Messaging > Serv. commands.
■Delete messages
To delete messages, select Menu > Messaging > Delete messages > By
message to delete single messages, By folder to delete all messages from
a folder, or All messages.
■SIM messages
SIM messages are specific text messages saved to your SIM card. You
can copy or move those messages to the phone memory, but not vice
versa. To read SIM messages, select Menu > Messaging > Options >
SIM messages.
■Message settings
General settings
General settings are common for text and multimedia messages.
FCC Draft
Messaging
39
Select Menu > Messaging > Message settings > General settings and
from the following options:
Save sent messages > Yes — to set the phone to save the sent messages
in the Sent items folder
Overwriting in Sent > Allowed — to set the phone to overwrite the old
sent messages with the new ones when the message memory is full. This
setting is shown only if you set Save sent messages > Yes.
Font size — to select the font size used in messages
Favorite recipient — to define contacts or groups as favorites and easily
found in the contacts and groups lists
Graphical smileys > Yes — to set the phone to replace character-based
smileys with graphical ones
Text messages
The text message settings affect the sending, receiving, and viewing of
text and SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and
from the following options:
Delivery reports > Yes — to ask the network to send delivery reports
about your messages (network service)
Message centers > Add center — to set the phone number and name of
the message center that is required for sending text messages. You
receive this number from your service provider.
Msg. center in use — to select the message center in use
Message validity — to select the length of time for which the network
attempts to deliver your message
Messages sent via — to select the format of the messages to be sent:
Text, Page, or Fax (network service)
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to be
sent as viewed. If you select Reduced, characters with accents and other
marks may be converted to other characters.
FCC Draft
Messaging
40
Rep. via same center > Yes — to allow the recipient of your message to
send you a reply using your message center (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of
multimedia messages. You may receive the configuration settings for
multimedia messaging as a configuration message. See Configuration
settings service, 9. You can also enter the settings manually. See
Configuration, 55.
Select Menu > Messaging > Message settings > Multimedia msgs. and
from the following options:
Delivery reports > Yes — to ask the network to send delivery reports
about your messages (network service)
MMS creation mode - Allows you to select whether or not to create
multimedia messages with restrictions on content. When selecting
Restricted receiving phone is more likely to support sent messages.
Select Free enables you to add various types of multimedia to the
message.
Image size — to set the image size in multimedia messages
Default slide timing — to define the default time between slides in
multimedia messages
Incoming MMS msgs. — to allow the reception of multimedia messages
automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set
to No.
Allow adverts — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No, or Incoming multi-
media messages is set to Reject.
Configuration sett. > Configuration — only the configurations that
support multimedia messaging are shown. Select a service provider,
Default, or Personal config. for multimedia messaging. Select Account
and an MMS account contained in the active configuration settings.
FCC Draft
Contacts
41
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You
may receive the settings as a configuration message. See Configuration
settings service, 9. You can also enter the settings manually. See
Configuration, 55.
Select Menu > Messaging > Message settings > E-mail messages and
from the following options:
New e-mail notif. — turn new e-mail notification on or off
Allow mail reception — to always allow messages, or only in your home
network
Reply with orig. msg. — to reply with the original text in an e-mail
Image size in e-mail — to define the default size of an image in an e-
mail
Edit mailboxes — to add, delete, or change the mailboxes in use
7. Contacts
You can save names and phone numbers (contacts) in the
phone memory and in the SIM card memory.
The phone memory may save contacts with additional details, such as
various phone numbers and text items. You can also save an image for a
limited number of contacts.
The SIM card memory can save names with one phone number attached
to them. The contacts saved in the SIM card memory are indicated by
.
■Search for a contact
Select Menu > Contacts > Names. Scroll through the list of contacts, or
enter the first characters of the name you are searching for.
FCC Draft
Contacts
42
■Save names and phone numbers
Names and numbers are saved in the used memory. To save a name and
phone number, select Menu > Contacts > Names > Options > Add new
contact.
■Save details
In the phone memory you can save different types of phone numbers, a
tone or a video clip, and short text items for a contact.
The first number you save is automatically set as the default number,
and it is indicated with a frame around the number type indicator (for
example, ). When you select a name from contacts (for example, to
make a call), the default number is used unless you select another
number.
Make sure that the memory in use is Phone or Phone and SIM. See
Settings, 43.
Search for the contact to which you want to add a detail, and select
Details > Options > Add detail. Select from the options available.
■Copy or move contacts
You can move and copy contacts from the phone memory to the SIM
card memory, or vice versa. The SIM card can save names with one
phone number attached to them.
To move or copy contacts one by one, select Menu > Contacts > Names.
Scroll to the contact, and select Options > Move contact or Copy
contact.
To move or copy marked contacts, select Menu > Contacts > Names.
Scroll to a contact, and select Options > Mark. Then mark all other
contacts, and select Options > Move marked or Copy marked.
To move or copy all contacts, select Menu > Contacts > Move contacts
or Copy contacts.
■Edit contact details
Search for the contact, and select Details. To edit a name, number, text
item, or to change the image, select Options > Edit. To change the
number type, scroll to the desired number, and select Options > Change
FCC Draft
Contacts
43
type. To set the selected number as the default number, select Set as
default.
■Synchronize all
Synchronize your calendar, contacts data, and notes with a remote
Internet server (network service). For details see Synchronize from a
server, 52.
■Delete contacts
To delete all the contacts and the details attached to them from the
phone or SIM card memory, select Menu > Contacts > Del. all
contacts > From phone memory or From SIM card.
To delete a contact, search for the desired contact, and select Options >
Delete contact.
To delete a number, text item, or an image attached to the contact,
search for the contact, and select Details. Scroll to the desired detail,
and select Options > Delete and your desired option.
■Business cards
You can send and receive a person’s contact information from a
compatible device that supports the vCard standard as a business card.
To send a business card, search for the contact whose information you
want to send, and select Details > Options > Send business card.
When you have received a business card, select Show > Save to save the
business card in the phone memory. To discard the business card, select
Exit > Yes.
■Settings
Select Menu > Contacts > Settings and from the following options:
Memory in use — to select the SIM card or phone memory for your
contacts. Select Phone and SIM to recall names and numbers from both
memories. In that case, when you save names and numbers, they are
saved in the phone memory.
Contacts view — to select how the names and numbers in Contacts are
displayed
FCC Draft
Log
44
Name display — to select whether the contact’s first or last name is
displayed first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■Groups
Select Menu > Contacts > Groups to arrange the names and phone
numbers saved in the memory into caller groups with different ringing
tones and group images.
■1-touch dialing
To assign a number to a speed-dialing key, select Menu > Contacts > 1-
touch dialing and scroll to the speed-dialing number you want.
Select Assign, or if a number has already been assigned to the key,
select Options > Change. Select Find and locate the contact you want
to assign. If the 1-touch dialing function is off, the phone asks whether
you want to activate it. See also 1-touch dialing in Call, 53.
To make a call using the speed-dialing keys, see 1-touch dialing, 26.
■Info, service, and my numbers
Select Menu > Contacts and from one of these submenus:
Info numbers — to call the information numbers of your service provider
if the numbers are included on your SIM card (network service)
Service numbers — to call the service numbers of your service provider if
the numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card, if
the numbers are included on your SIM card
8. Log
The phone registers your missed, received, and dialed calls
if the network supports it and the phone is switched on and within the
network service area.
FCC Draft
Settings
45
To view the information on your calls, select Menu > Log > Missed calls,
Received calls, or Dialed numbers. To view your recent missed and
received calls and the dialed numbers chronologically, select Call log. To
view the contacts to whom you most recently sent messages, select
Msg. recipients.
To view the information on your recent communications, select Menu >
Log > Call duration, Data counter, or Packet data timer.
To view how many text and multimedia messages you have sent and
received, select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
Note: Some timers may be reset during service or software upgrades.
9. Settings
■Profiles
Your phone has various settings groups called profiles, for which you
can customize the phone tones for different events and environments.
Select Menu > Settings > Profiles, the desired profile and from the
following options:
Activate — to activate the selected profile
Customize — to customize the profile. Select the setting you want to
change, and make the changes.
Timed — to set the profile to be active until a certain time up to
24 hours, and set the end time. When the time set for the profile expires,
the previous profile that was not timed becomes active.
■Themes
A theme contains elements for personalizing your phone.
Select Menu > Settings > Themes and from the following options:
Select theme — to set a theme. A list of folders in Gallery opens. Open
the Themes folder, and select a theme.
FCC Draft
Settings
46
Theme downloads — to open a list of links to download more themes
■Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the
Profiles menu. See Customize in Profiles, 45.
To set the phone to ring only for calls from phone numbers that belong
to a selected caller group, select Alert for. Scroll to the caller group you
want or All calls, and select Mark.
Select Options > Save to save the settings or Cancel to leave the
settings unchanged.
If you select the highest ringing tone level, the ringing tone reaches its highest
level after a few seconds.
■Main Display
Select Menu > Settings > Main display and from the available options:
Wallpaper — to add the background image in the standby mode
Active standby — to switch the active standby mode on or off and to
organize and customize the active standby mode.
Standby mode font color — to select the color for the texts in the
standby mode
Navigation key icons — to display the icons of the current navigation key
shortcuts in the standby mode when active standby is off
Notification details — to display or hide details, such as contact
information in a missed call or message received notifications
Fold animation — to set your phone to display an animation when you
open and close the phone
Font size — to set the font size for messaging, contacts and web pages
Operator logo — to set your phone to display or hide the operator logo
Cell info display > On — to display the cell identity, if available from the
network
FCC Draft
Settings
47
■Mini display
Select Menu > Settings > Mini display. You can change the settings for
Wallpaper, Screen saver, Power saver, Sleep mode, and Fold animation.
To set the analog clock as a screensaver for the Mini display, see Analog
clock, 21.
■Date and time
To change the time, time zone, and date settings, select Menu >
Settings > Date and time > Date & time settings, Date and time format,
or Auto-update of time (network service).
When traveling to a different time zone, select Menu > Settings > Date
and time > Date & time settings > Time zone and the time zone of your
location in terms of the time difference with respect to Greenwich Mean
Time (GMT) or Universal Time Coordinated (UTC). The time and date are
set according to the time zone and enable your phone to display the
correct sending time of received text or multimedia messages. For
example, GMT -5 denotes the time zone for New York (USA), 5 hours
west of Greenwich/London (UK).
■My shortcuts
With personal shortcuts you get quick access to often used functions of
the phone.
Left selection key
To select a function from the list, select Menu > Settings > My
shortcuts > Left selection key.
If the left selection key is Go to to activate a function, in the standby
mode, select Go to > Options and from the following options:
Select options — to add a function to the shortcut list or to remove one
Organize — to rearrange the functions on your personal shortcut list
Right selection key
To select a function from the list, select Menu > Settings > My
shortcuts > Right selection key.
FCC Draft
Settings
48
Navigation key
To assign other phone functions from a predefined list to the navigation
key (scroll key), select Menu > Settings > My shortcuts > Navigation
key.
Active standby key
To assign the navigation keys used to access the active standby, select
Menu > Settings > My shortcuts > Active standby key.
Voice commands
To call contacts and carry out phone functions, say the voice commands.
Voice commands are not language-dependent. To set the language, see
Voice recognition language in Phone, 53.
To select the phone functions to activate with voice commands, select
Menu > Settings > My shortcuts > Voice commands and a folder. Scroll
to a function. indicates that the voice tag is activated. To activate
the voice tag, select Add. To play the activated voice command, select
Playback. To use voice commands, see Enhanced voice dialing, 26.
To manage the voice commands, scroll to a phone function, and select
from the following options:
Edit or Remove — to change or deactivate the voice command of the
selected function
Add all or Remove all — to activate or deactivate voice commands to all
functions in the voice commands list
■Connectivity
You can connect the phone to a compatible device using a Bluetooth
wireless technology or a USB data cable connection. You can also define
the settings for EGPRS or 3G dial-up connections. check berlin
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: generic access, network access, generic object exchange,
hands-free, headset, object push, file transfer, dial-up networking, SIM card
access, personal area network profile, service discovery application profile,
generic audio/video distributuion, service discovery application profile, advanced
FCC Draft
Settings
49
audio and distribution profile, audio/video remote control profile, generic audio/
video distribution profile, and serial port. To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the phone to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using
Bluetooth technology communicate using radio waves, your phone and
the other devices do not need to be in direct line-of-sight, although the
connection can be subject to interference from obstructions such as
walls or from other electronic devices.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the
following options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth
function. indicates that Bluetooth is activated. When activating
Bluetooth technology for the first time, you are asked to give a name for
the phone. Use a unique name that is easy for others to identify.
Search audio enhanc. — to search for compatible Bluetooth audio
devices. Select the device that you want to connect to the phone.
Paired devices — to search for any Bluetooth device in range. Select New
to list any Bluetooth device in range. Select a device, and Pair. Enter an
agreed Bluetooth passcode of the device (up to 16 characters) to
associate (pair) the device to your phone. You must only give this
passcode when you connect to the device for the first time. Your phone
connects to the device, and you can start data transfer.
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth. To check which
Bluetooth connection is currently active, select Active devices. To view a
FCC Draft
Settings
50
list of Bluetooth devices that are currently paired with the phone, select
Paired devices.
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select
Menu > Settings > Connectivity > Bluetooth > My phone's visibility or
My phone's name.
If you are concerned about security, turn off the Bluetooth function, or select My
phone's visibility > Hidden. Always accept only Bluetooth communication from
others with whom you agree.
Packet data
General packet radio service (GPRS) or 3G are network services that
allow mobile phones to send and receive data over an internet protocol
(IP)-based network.
To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data conn. and from the following
options:
When needed — to set the packet data connection to established when
an application needs it. The connection is closed when the application is
terminated.
Always online — to set the phone to automatically connect to a packet
data network when you switch the phone on
Modem settings
You can connect the phone using Bluetooth wireless technology or USB
data cable connection to a compatible PC and use the phone as a
modem to enable GPRS 0r 3G connectivity from the PC.
To define the settings for connections from your PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active
access point, and activate the access point you want to use. Select Edit
active access pt. > Packet data acc. pt., enter a name to change the
access point settings, and select OK. Select Packet data acc. pt., enter
the access point name (APN) to establish a connection to an network,
and select OK.
FCC Draft
Settings
51
You can also set the EGPRS dial-up service settings (access point name)
on your PC using the Nokia Modem Options software. See Nokia PC
Suite, 85. If you have set the settings both on your PC and on your
phone, the PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes with another
compatible device (for example, a mobile phone), a compatible PC, or a
remote Internet server (network service).
Your phone allows data transfer with a compatible PC or another
compatible device when using the phone without a SIMcard.
Transfer contact list
To copy or synchronize data from your phone, the name of the device
and the settings must be in the list of transfer contacts. If you receive
data from another device (for example, a compatible mobile phone), the
corresponding transfer contact is automatically added to the list, using
the contact data from the other device. Server sync and PC
synchronisation are the original items in the list.
To add a new transfer contact to the list (for example a mobile phone),
select Menu > Settings > Connectivity > Data transfer > Options > Add
transfer contact > Phone synchronisation or Phone copy, and enter the
settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the
transfer contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list,
select Options > Delete.
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable
connection. The other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data
transfer and the transfer contact from the list, other than Server sync or
PC synchronisation. According to the settings, the selected data is
copied or synchronized.
FCC Draft
Settings
52
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts, install the
Nokia PC Suite software for your phone on the PC. Use Bluetooth
wireless technology or a USB data cable for the synchronization, and
start the synchronization from the PC.
Synchronize from a server
To use a remote internet server, subscribe to a synchronization service.
For more information and the settings required for this service, contact
your service provider. You may receive the settings as a configuration
message. See Configuration settings service, 9 and Configuration, 55.
To start the synchronization from your phone, select Menu > Settings >
Connectivity > Data transfer > Server sync. Depending on the settings,
select Initialising syn-chronisation or Initialising copy.
Synchronizing for the first time or after an interrupted synchronization
may take up to 30 minutes to complete.
USB data cable
You can use the USB data cable to transfer data between the phone and
a compatible PC or a printer supporting PictBridge. You can also use the
USB data cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the
data cable. Confirm USB data cable connected. Select mode. and select
from the following options:
Nokia mode — to use the phone to interact with applications on a PC
that has Nokia PC Suite
Printing & Media — to connect the phone to a PC to synchronize it with
Windows Media Player (music, video)
Data storage — to connect to a PC that does not have Nokia software
and use the phone as a data storage
To change the USB mode, select Menu > Settings > Connectivity > USB
data cable > Nokia mode, Printing & Media, or Data storage.
FCC Draft
Settings
53
■Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You
may not be able to forward your calls if some call restriction functions
are active. See Call restrictions in Security, 56.
Anykey answer > On — to answer an incoming call by briefly pressing
any key, except the power key, the camera key, the left and right
selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt
Voice clarity > Active — to enhance speech intelligibility especially in
noisy environments
1-touch dialing > On — to dial the names and phone numbers assigned
to the speed-dialing keys 2 to 9 by pressing and holding the
corresponding number key
Call waiting > Activate — to have the network notify you of an incoming
call while you have a call in progress (network service). See Call waiting,
27.
Summary after call > On — to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you
are calling (network service). To use the setting agreed upon with your
service provider, select Set by network.
Outgoing call line — to select the phone line for outgoing calls (network
service)
Answ. if fold opened > On — to answer an incoming call by opening the
fold.
■Phone
Select Menu > Settings > Phone and from the following options:
Language settings — to set the display language of your phone, select
Phone language. Automatic selects the language according to the
information on the SIM card. To set a language for the voice playback,
FCC Draft
Settings
54
select Voice recognition language. See Enhanced voice dialing, 26 and
Voice commands in My shortcuts, 47.
Memory status — to view the amount of used and available phone
memory
Automatic keyguard — to set the keypad of your phone to lock
automatically after a preset time delay when the phone is in the standby
mode and no function of the phone has been used. Select On, and set
the time.
Security keyguard — to set the phone to ask for the security code when
you unlock the keyguard. Enter the security code, and select On.
Welcome note — to write the note that is shown when the phone is
switched on
Phone updates — to update phone software or check the current
software
Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM.
You cannot access this option during an active call.
Operator selection > Automatic — to set the phone to automatically
select one of the cellular networks available in your area. With Manual
you can select a network that has a roaming agreement with your
service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone > On — the phone plays a tone when switched on
Fold close handling — to select whether to return to standby mode or
keep all applications open when the fold is closed
Flight query > On — the phone asks whether to use the flight profile
every time when switched on. With flight profile all radio connections
are switched off. The flight profile should be used in areas sensitive to
radio emissions.
■Enhancements
This menu or the following options are shown only if the phone is or has
been connected to a compatible mobile enhancement.
FCC Draft
Settings
55
Select Menu > Settings > Enhancements > Charger. Select an
enhancement, and depending on the enhancement, from the following
options:
Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
Lights — to set the lights permanently On. Select Automatic to set the
lights on for 15 seconds after a key press.
■Configuration
You can configure your phone with settings required for certain services
to function correctly. Your service provider may also send you these
settings. See Configuration settings service, 9.
Select Menu > Settings > Configuration and from the following
options:
Default config. sett.— to view the service providers saved in the phone.
To set the configuration settings of the service provider as default
settings, select Options > Set as default.
Activ. def. in all apps. — to activate the default configuration settings for
supported applications
Preferred access pt. — to view the saved access points. Scroll to an
access point, and select Options > Details to view the name of the
service provider, data bearer, and packet data access point or GSM
dial-up number.
Connect to support — to download the configuration settings from your
service provider
Device manager sett. — to select when to allow service software updates
Personal config. sett. — to add new personal accounts for various
services manually, and to activate or delete them. To add a new personal
account if you have not added any, select Add new; otherwise, select
Options > Add new. Select the service type, and select and enter each of
the required parameters. The parameters differ according to the selected
service type. To delete or activate a personal account, scroll to it, and
select Options > Delete or Activate.
FCC Draft
Settings
56
■Security
When security features that restrict calls are in use (such as call restriction,
closed user group, and fixed dialing) calls still may be possible to the official
emergency number programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request — to set the phone to ask for
your PIN or UPIN code every time the phone is switched on. Some SIM
cards do not allow the code request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from
your phone (network service). A restriction password is required.
Closed user group — to specify a group of people whom you can call and
who can call you (network service)
Security level > Phone — to set the phone to ask for the security code
whenever a new SIM card is inserted into the phone. If you select
Memory, the phone asks for the security code when the SIM card
memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2
code, or restriction password
Code in use — to select whether the PIN code or UPIN code should be
active
PIN2 code request — to select whether the PIN2 code is required when
using a specific phone feature which is protected by the PIN2 code.
Some SIM cards do not allow the code request to be turned off.
Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your phone. See
Certificates, 84.
User certificates — to view a list of user certificates downloaded to your
phone.
Security module sett. — to view Security module details, select Module
PIN request, or change the module PIN and signing PIN. See also Access
codes, 8.
FCC Draft
Gallery
57
■Restore factory settings
To reset some of the menu settings to their original values, select
Menu > Settings > Rest. factory sett. Enter the security code. The names
and phone numbers saved in Contacts, are not deleted.
10. Gallery
In this menu you can manage images, video clips, music
files, themes, graphics, tones, recordings, and received files.
These files are stored in the phone memory or an attached microSD
memory card and may be arranged in folders.
Your phone supports an activation key system to protect acquired
content. Always check the delivery terms of any content and activation
key before acquiring them, as they may be subject to a fee.
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
To see the list of folders, select Menu > Gallery.
To see the available options of a folder, select a folder > Options.
To view the list of files in a folder, select a folder > Open.
To see the available options of a file, select a file > Options.
To view the folders of the memory card when moving a file, scroll to the
memory card, and press the scroll key right.
■Print images
Your device supports Nokia XPressPrint. To connect it to a
compatible printer use a data cable or send the image via Bluetooth to a
printer supporting Bluetooth technology. See Connectivity, 48.
You can print images that are in the .jpg format. The images taken with
the camera are automatically saved in the .jpg format.
Select the image you want to print and Options > Print.
FCC Draft
Push to talk
58
11. Push to talk
Select Menu > Push to talk.
Push to talk (PTT) over cellular is a two-way radio service available over
a GPRS cellular network (network service).
You can use PTT to have a conversation with one person or with a group
of people (channel) having compatible devices. While you are connected
to the PTT service, you can use the other functions of the phone.
To check availability and costs, and to subscribe to the service, contact
your network operator. Roaming services may be more limited than for
normal calls.
Before you can use the PTT service, you must define the required PTT
service settings. See PTT settings, 63 and Configuration settings, 63.
■PTT channels
A PTT channel comprises a group of people (for example, friends or a
workteam) who joined the channel after they where invited to. When
you call a channel, all members joined to the channel hear the call
simultaneously.
There are different types of PTT channels:
Public channel — Every channel member can invite other persons.
Private channel — Only persons which receive an invitation by the
channel creator can join in.
Provisioned channel — A permanent channel is created by the service
provider.
You can set the status of each channel to Active or Inactive.
The number of active channels and the number of members per channel
is limited. Contact your service provider for details.
Create a channel
To add a channel, select Menu > Push to talk > Add channel and enter
the settings in the form fields:
Channel name: — Enter a name for the new channel.
FCC Draft
Push to talk
59
Channel status: — Select Active to set the channel active, or Inactive to
disable the channel.
Chnl. nickname: — Enter your nick name to be shown the new channel.
Chnl. security: > Public channel or Private channel
Image: — Select Change and an image from the Gallery or the Default
graphic to set a graphic for the new channel.
To send an invitation to the channel, select Yes when the phone requests
it. The recipient of the invitation is added to the member list of the
channel when the invitation is accepted. To send further invitations
select Menu > Push to talk > Channel list, a channel, and Options >
Send invitation. To send the invitation, use a text message.
To add a provisioned channel, select Menu > Push to talk > Add
channel > Options > Edit add. manually. Enter the Channel addr.:
provided by your service provider.
Receive an invitation
1. When you receive a text message invitation to a channel, Channel
invitation received: %U is displayed.
2. To view the nickname of the person who sent the invitation and the
channel address if the channel is not a private channel, select View.
3. To add the channel to your phone, select Save.
4. To set the status for the channel, select Active or Inactive.
To reject the invitation, select Exit > Yes, or select View > Discard > Yes.
■Switch PTT on and off
To connect to the PTT service, select Menu > Push to talk > Switch PTT
on, or press and hold the PTT key. indicates the PTT connection.
indicates that the service is temporarily unavailable. If you have added
channels to the phone, you are automatically joined to the active
channels.
You may assign a default function to the PTT key to open the channel
list, the contacts list or a single channel or contact. See PTT settings, 63.
To disconnect from the PTT service, select Switch PTT off.
FCC Draft
Push to talk
60
■Make and receive a PTT call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
To make a channel call, a one-to-one call, or a call to multiple
recipients, you must hold the PTT key as long as you talk. To listen to the
response, release the PTT key.
You may be able to check the login status of your contacts in Menu >
Push to talk > Contacts list. This service depends on your network
operator and is only available for subscribed contacts. To subscribe a
contact, select Options >Subscribe contact, or if one or more contacts
are already marked Subscribe marked.
or indicate that the person is either available or unknown.
indicates that the person wants not to be disturbed, but can receive
callback requests. indicates that the person has PTT not switched
on.
Make a channel call
To make a call to a channel, select Channel list in the PTT menu, scroll to
the desired channel, and press and hold the PTT key.
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you have
added the PTT address, select Contacts > Names or Menu > Push to
talk > Contacts list. Scroll to a contact, and press and hold the PTT key.
To start a one-to-one call from the list of PTT channels, select Channel
list, scroll to the desired channel, and select Members. Scroll to the
desired contact, and press and hold the PTT key.
To start a one-to-one call from the list of callback requests you have
received, select Callback inbox. Scroll to the desired nickname, and press
and hold the PTT key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients
receive an incoming call and need to accept the call in order to
participate. If supported by your network operator, you also may select
FCC Draft
Push to talk
61
contacts with a phone number but without PTT number. For details,
contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired
contacts.
2. Press and hold the PTT key to start the call. The participating contacts
are shown on the display, as soon as they join the call.
3. Press and hold the PTT key to talk to them. Release the PTT key to
hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Informations, such as
the channel, the phone number, or the nickname (network service) of
the caller are displayed.
You can either accept or reject an incoming one-to-one call if you have
set the phone to first notify you of the one-to-one calls.
When you press and hold the PTT key while the caller is talking, you hear
a queuing tone, and Queuing is displayed. Press and hold the PTT key,
and wait for the other person to finish; then you can talk immediately.
■Callback requests
If you make a one-to-one call and do not get a response, you can send a
request for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk
menu, select Contacts list. Scroll to a contact, and select Options >
Send PTT callback.
To send a callback request from Contacts, search for the desired contact,
and select Details. Scroll to the PTT address, and select Options > Send
PTT callback.
FCC Draft
Push to talk
62
To send a callback request from the channel list in the PTT menu, select
Channel list, and scroll to the desired channel. Select Members, scroll to
the desired contact, and select Options > Send PTT callback.
To send a callback request from the callback request list in the Push to
talk menu, select Callback inbox. Scroll to a contact, and select
Options > Send PTT callback.
Respond to a callback request
When someone sends you a callback request, Callback request received
is displayed in the standby mode.
To open the Callback inbox, select View. The list of nicknames of the
persons who have sent you callback requests is shown.
To make a one-to-one call, select the desired request and press and hold
the PTT key.
To send a call request back to the sender, select Options > Send PTT
callback.
To delete the request, select Delete.
To save a new contact or to add the PTT address to a contact from a
received callback request, select Options > Save as or Add to contact.
■Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one
calls in the following ways:
To add a PTT address to a name in Contacts, search for the desired
contact, select Details > Options > Add detail > PTT address. A contact
will only appear in the PTT contact list, if the PTT address is entered.
To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service, select
Channel list, and scroll to the desired channel. Select Members, scroll to
the member whose contact information you want to save, and select
Options. To add a new contact, select Save as. To add a PTT address to a
name in Contacts, select Add to contact.
FCC Draft
Push to talk
63
■PTT settings
Select Menu >Push to talk > PTT settings.
1 to 1 calls > On — to select the phone to allow the reception of
incoming one-to-one calls. To make but not receive one-to-one calls,
select Off. The service provider may offer some services that override
these settings. To set the phone to first notify you of incoming
one-to-one calls with a ringing tone, select Notify.
PTT key default function — to set the PTT key to following functions:
Open contact list, Open channel list, Call contact/group. Select a
contact, a group, or Call PTT channel and select a channel. When you
press and hold the PTT key, the selected function will be performed.
Show my login status — to enable or disable the sending of the login
status
PTT status in startup > Yes or Ask first— to set the phone to
automatically connect to the PTT service when you switch the phone on
Push to talk when roaming — to switch the PTT service on or off when
the phone is used outside of the home network
Send my PTT address > No — to hide your PTT address from channel and
one-to-one calls
■Configuration settings
You may receive the settings for connecting to the service from your
service provider. See Configuration settings service, 9. You can enter the
settings manually. See Configuration, 55.
To select the settings for connecting to the service, select Menu > Push
to talk > Configuration settings. Select from the following options:
Configuration — to select a service provider, Default, or Personal config.
for PTT service. Only the configurations that support the PTT service are
shown.
Account — to select a PTT service account contained in the active
configuration settings
Other parameters are PTT user name, Default nickname, PTT password,
Domain, and Server address.
FCC Draft
Media
64
■Web
Select Menu > Push to talk > Web to access the internet site of your PTT
provider.
12. Media
When taking and using images or video clips, obey all laws and
respect local customs as well as privacy and legitimate rights of others, including
copyrights.
You can take photos or record live video clips with the built-in 1.3 megapixel
camera. The camera produces pictures in jpeg format and video clips in 3gpp
format. The camera lens is on the front of the phone. The color display works as a
viewfinder.
■Camera
The camera produces pictures in .jpg format, and you can digitally zoom
up to eight times.
Take a photo
To open the camera viewfinder, select Menu > Media > Camera.
You can also take a photo when the phone is folded. Press left or right
selection keys and select Camera.
To zoom in and out in camera mode, press volume keys up or down.
To take an image, select Capture, or press camera key. The phone saves
the images on the memory card.
Select Options to set Night mode on if the lighting is dim, Self-timer on
to activate the self-timer, Img. sequence on to take images in a fast
sequence. With the highest image size setting three images are taken in
a sequence, with other size settings eight images are taken.
Select Options > Settings >Image preview time and a preview time to
display the taken images on the display. During the preview time, select
Back to take another image or Send to send the image as a multimedia
message.
Your device supports an image capture resolution of 1280 x 960 pixels.
FCC Draft
Media
65
Camera and video options
To use a filter, select Options > Effects > Normal, Grayscale, Sepia,
Negative.
To change the camera and video settings, select Options > Settings.
■Video
You can record video clips in .3gp format. Available recording time
depends on the video clip length and quality settings.
The length and file size of the clips may vary depending on the selected
quality and available memory. To set the quality of your video clips,
select Menu > Media > Video > Options > Settings >Video clip
quality > High, Normal or Basic.
To select the file size limit, select Menu > Media > Video > Options >
Settings > Video clip length. Default means that the file size is limited so
that it fits into a multimedia message (multimedia message size can
vary among devices). Maximum means that all available memory is
used. Available memory depends on where the video clip is stored.
Record a video clip
Select Menu > Media > Video >Record. You can also press and hold the
camera key. To pause the recording, select Pause; to resume the
recording, select Continue. To stop the recording, select Stop. The phone
saves the recording in Gallery > Video clips.
To zoom in or out, press the volume key up or down, or scroll left and
right.
■Music player
Your phone includes a music player for listening to music tracks,
recordings or, other sound files that you have transferred to the phone
with the Nokia Audio Manager application, which is part of Nokia PC
Suite. See Nokia PC Suite, 85.
Music files stored in a folder in the phone memory or in a folder of the
memory card, will automatically be detected and added to the default
track list.
To open the music player, select Menu > Media > Music player.
FCC Draft
Media
66
Playing the music tracks
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Operate the music player with the keys on the phone or with the virtual
keys on the display.
When you open the Music player menu, the details of the first track on
the default track list are shown. To play, select .
To adjust the volume level, use the volume keys on the side of the phone.
To pause the playing, select .
To stop the playing, press and hold the end key
To skip to the next track, select . To skip to the beginning of the
previous track, select .
To rewind the current track, select and hold . To fast forward the
current track, select and hold . Release the key at the position you
want.
Options in Music player
In the Music player menu, music tracks can be saved in the following
categories:
All songs — to view all music tracks
Playlists — to create new playlists, check the currently playing music,
view recently added playlists or tracks, find the tracks played most
often, and view all playlists
Artists — to view all music tracks by the artist’s name
Albums— to view music tracks by albums
Genres — to view music tracks by genres
Videos — to view a list of music videos
Settings
In the Settings menu, the following options may be available:
Shuffle — to play music tracks in random order
FCC Draft
Media
67
Repeat— to repeat the current song, all songs, or to turn off repeat
Equalizer — to open the list of media equalizer sets. See Equalizer, 68.
Stereo widening — to enhance the audio output of the phone by
enabling a wider stereo sound effect
Music player theme — to select the theme or skin of the music player
Other options
Go to Music player— to go to the main music menu
Now playing — to view the track currently playing
Add to playlist— to add the current song to the Favorites track list.
Downloads— to download music through web.
Web page — to go to the browser
Mute audio — to mute the audio
Play via Bluetooth — to connect and play music through a bluetooth
enabled audio accessory using bluetooth connection.
■Voice recorder
You can record pieces of speech, sound, or an active call, and save them
in Gallery. This is useful when recording a name and phone number to
write down later.
The recorder cannot be used when a data call or GPRS connection is active.
Record sound
1. Select Menu > Media > Voice recorder.
To use the graphical keys , , or on the display, scroll left or
right to the desired key, and select it.
2. To start the recording, select . To start the recording during a call,
select Options > Record. While recording a call, all parties to the call
hear a faint beeping sound. When recording a call, hold the phone in
the normal position near to your ear. To pause the recording, select
.
3. To end the recording, select . The recording is saved in Gallery >
Recordings.
FCC Draft
Organizer
68
To listen to the latest recording, select Options > Play last recorded.
To send the last recording, select Options > Send last recorded.
To see the list of recordings in Gallery, select Options > Recordings
list > Recordings.
■Equalizer
To control the sound quality when using the music player by amplify or
diminish frequency bands.
Select Menu > Media > Equalizer.
To activate a set, scroll to one of the equalizer sets, and select Activate.
To view, edit, or rename a selected set, select Options > View, Edit, or
Rename. Not all sets can be edited or renamed.
■Stereo widening
Stereo widening enhances the audio output of the phone by enabling a
wider stereo sound effect. To change the setting, select Menu > Media
> Stereo widening.
13. Organizer
■Alarm clock
You can set the phone to alarm at a desired time. Select Menu >
Organizer > Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To change
the alarm time when the alarm time is set, select On.
To set the phone to alert you on selected days of the week, select Repeat
alarm.
To select the alarm tone or set the radio as the alarm tone, select Alarm
tone:. If you select the radio as an alarm tone, connect the headset to
the phone.
To set a snooze time-out, select Snooze time-out and the time.
FCC Draft
Organizer
69
Stop the alarm
The phone sounds an alert tone even if the phone was switched off. To
stop the alarm, select Stop. If you let the phone continue to sound the
alarm for a minute or select Snooze, the alarm stops for the time you set
in Snooze time-out, then resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
■Calendar
Select Menu > Organizer > Calendar.
The current day is indicated by a frame. If there are any notes set for the
day, the day is in bold type, and the beginning of the note is shown
below the calendar. To view the day notes, select View. To view a week,
select Options > Week view. To delete all notes in the calendar, select
the month or week view, and select Options > Delete all notes.
To set the date, time, time zone, date or time format, date separator,
default view, or the first day of the week, select Settings.
To set the phone to delete old notes automatically after a specified time,
select Auto-delete notes.
Make a calendar note
Select Menu > Organizer > Calendar. Scroll to the date, and select
Options > Make a note and one of the following note types:
Meeting, Call, Birthday, Memo, or Reminder. Fill in
the fields.
Note alarm
The phone displays the note and if set, sounds a tone. With a call note
on the display, to call the displayed number, press the call key. To
stop the alarm and to view the note, select View. To stop the alarm for
10 minutes, select Snooze.
To stop the alarm without viewing the note, select Exit.
FCC Draft
Organizer
70
■To-do list
To save a note for a task that you must do, select Menu > Organizer >
To-do list.
To make a note if no note is added, select Add note. Fill in the fields, and
select Save.
To view a note, scroll to it, and select View. While viewing a note, you
can also select an option to edit the attributes. You can also select an
option to delete the selected note and delete all the notes that you have
marked as done.
■Notes
To write and send notes, select Menu > Organizer > Notes.
To make a note if no note is added, select Add note. Write the note, and
select Save.
■Calculator
The calculator in your phone provides basic arithmetic and
trigonometric functions, calculates the square and the square root, the
inverse of a number, and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Select Menu > Organizer > Calculator. When 0 is displayed on the
screen, enter the first number in the calculation. Press # for a decimal
point. Scroll to the desired operation or function or select it from the
Options. Enter the second number. Repeat this sequence as many times
as it is necessary. To start a new calculation, first select and hold Clear.
To perform a currency conversion, select Menu > Organizer >
Calculator. To save the exchange rate, select Options > Exchange rate.
Select either of the displayed options. Enter the exchange rate, press #
for a decimal point, and select OK. The exchange rate remains in the
memory until you replace it with another one. To perform the currency
conversion, enter the amount to be converted, and select Options > To
home or To foreign.
Note: When you change base currency, you must enter new exchange
rates because all previously set exchange rates are cleared.
FCC Draft
Organizer
71
■Countdown timer
To start the countdown timer, select Menu > Organizer > Countd.
timer > Normal timer, enter the alarm time, and write a note text that is
displayed when the time expires. To start the countdown timer, select
Start. To change the countdown time, select Change time. To stop the
timer, select Stop timer.
To have an interval timer with up to 10 intervals started, first enter the
intervals. Select Menu > Organizer > Countd. timer > Interval timer. To
start the timer, select Start timer > Start.
■Stopwatch
You can measure time, take intermediate times, or take lap times using
the stopwatch. During timing, the other functions of the phone can be
used. To set the stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organizer > Stopwatch and from the following options:
Split timing — to take intermediate times. To start the time observation,
select Start. Select Split every time that you want to take an
intermediate time. To stop the time observation, select Stop.
To save the measured time, select Save.
To start the time observation again, select Options > Start. The new
time is added to the previous time. To reset the time without saving it,
select Reset.
Lap timing — to take lap times
Continue — to view the timing that you have set in the background
Show last time — to view the most recently measured time if the
stopwatch is not reset
View times or Delete times — to view or delete the saved times
FCC Draft
Instant messaging
72
14. Instant messaging
■Instant messaging
With instant messaging (IM) (network service) you can send short,
simple text messages to online users. You have to subscribe to a service
and register with the IM service you want to use. For more information
about signing up for IM services, contact your service provider.
To set the required settings for the IM service, see Connect. settings in
Access, 72. The icons and texts on the display may vary, depending on
the IM service.
Note: Depending on your IM service, you may not have access to
all of the features described in this guide.
Access
Select Menu > Messaging > Instant messages. Instant messages may be
replaced by another term depending on the service provider. If more
than one set of connection settings for IM service is available, select the
one you want. Select from the following options:
Login — to connect to the IM service. To set the phone to automatically
connect to the IM service when you switch on the phone; in the login
session, select Automatic login: > On, or select Menu > Messaging >
Instant messages, connect to the IM service, and select Options >
Settings > Automatic login > On.
Saved convers. — to view, erase, or rename the conversations you saved
during an IM session
Connect. settings — to edit the settings needed for messaging and
presence. connection
Connect
To connect to the service, access the instant messages menu, select the
IM service, if needed, and select Login.
To disconnect from the IM service, select Options > Logout.
FCC Draft
Instant messaging
73
Sessions
When connected to the service your status as seen by others is shown in
a status line: Status: Online, My status: Busy or Status: App. off. To
change own status, select Change.
Below the status line there are three folders containing your contacts
and showing their status: Convers. (%N), Online (%N) and Offline (%N).
To expand the folder, scroll to it and select Expand (or press scroll right),
to collapse the folder select Collapse (or press scroll left).
Conversations — shows the list of new and read instant messages or
invitations to IM during the active IM session.
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
The icons and texts on the display depend on the IM service.
Online (%N) — shows the number of contacts that are online
Offline (%N) — shows the number of contacts that are offline
To start a conversation, expand the Online (%N) or the Offline (%N)
folder and scroll to the contact with whom you would like to chat and
select Chat. To answer an invitation or to reply to a message expand the
Conversations folder and scroll to the contact to whom you would like
to chat and select Open. To add contacts, see Add IM contacts, 74.
Groups > Public groups (not visible if groups are not supported by the
network) — the list of bookmarks to public groups provided by the
service provider is displayed. To start a IM session with a group, scroll to
a group, and select Join. Enter the screen name that you want to use as
your nickname in the conversation. When you have successfully joined
the group conversation, you can start a group conversation. You can
create a private group. See Groups, 75.
Search > Users or Groups — to search for other IM users or public groups
on the network by phone number, screen name, e-mail address, or name.
FCC Draft
Instant messaging
74
If you select Groups, you can search for a group by a member in the
group, or by group name, topic, or ID.
Options > Chat or Join group — to start the conversation when you have
found the user or the group you want.
Accept or reject an invitation
If you receive a new invitation, to read it, select Read. If more than one
invitation is received, select an invitation and Open. To join the private
group conversation, select Accept, and enter the screen name you want
to use as your nickname. To reject or delete the invitation, select
Options > Reject or Delete.
Read an instant message
If you receive a new message not associated with an active
conversation, New instant message is displayed. To read it, select Read.
If more than one message is received, select a message, and Open.
New messages received during an active conversation are held in
Instant messages > Conversations. If you receive a message from
someone not in IM contacts, the sender ID is displayed. To save a new
contact that is not in the phone memory, select Options > Save contact.
Participate in a conversation
To join or start an IM session, write your message; and select Send.
If you receive a new message during a conversation from a person not
taking part in the current conversation, is displayed, and the phone
sounds an alert tone.
Write your message; and select Send. Your message is displayed, and the
reply message is displayed below your message.
Add IM contacts
When connected to the IM service, in the IM main menu select
Options > Add contact > By mobile number, Enter ID manually, Search
from serv., or Copy from server (depending on service provider).
Scroll to a contact. To start a conversation, select Chat.
FCC Draft
Applications
75
Block or unblock messages
When you are in a conversation and want to block messages, select
Options > Block contact.
To block messages from a specific contact in your contacts list, scroll to
the contact in Conversations, Online (%N) or Offline (%N) and select
Options > Block contact > OK.
To unblock a contact, in the IM main menu select Options > Blocked list.
Scroll to the contact you want to unblock, and select Unblock > OK.
Groups
You can use the public groups provided by the service provider, or create
your own private groups for an IM conversation.
Public
You can bookmark public groups your service provider may maintain.
Connect to the IM service, and select Groups > Public groups. Select a
group, and Join. If you are not in the group, enter your screen name as
your nickname for the group. To delete a group from your list, select
Options > Delete group.
To search for a group, select Groups > Public groups > Search groups.
Private
Connect to the IM service, and from the main menu select Options >
Create group. Enter the name for the group and the screen name you
want to use as your nickname. Mark the private group members in the
contacts list, and write an invitation.
15. Applications
In this menu you can manage applications and games. These
files are stored in the phone memory or an attached microSD memory
card and may be arranged in folders.
For options to format or lock and unlock the memory card see Memory
card, 13.
FCC Draft
Applications
76
The third-party applications provided with your device may have been created
and may be owned by persons or entities not affiliated with or related to Nokia.
Nokia does not own the copyrights or intellectual property rights to the third-
party applications. As such, Nokia does not take any responsibility for end-user
support, functionality of the applications, or the information in the applications
or these materials. Nokia does not provide any warranty for the third-party
applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE
PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
■Launch a game
Your phone software includes some games.
Select Menu > Applications > Games. Scroll to the desired game, and
select Open.
■Launch an application
Your phone software includes some Java applications.
Select Menu > Applications > Collection. Scroll to an application, and
select Open.
■Some application options
Update version — to check if a new version of the application is available
for download from Web (network service)
Web page — to provide further information or additional data for the
application from an Internet page (network service), if available
App. access — to restrict the application from accessing the network
■Download an application
Your phone supports J2ME Java applications. Make sure that the
application is compatible with your phone before downloading it.
FCC Draft
Applications
77
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
You can download new Java applications and games in different ways.
Use the Nokia Application Installer from PC Suite to download the
applications to your phone, or select Menu > Applications > Options >
Downloads > App. downloads; the list of available bookmarks is shown.
See Bookmarks, 80.
For the availability of different services and pricing contact your service
provider.
Your device may have preinstalled bookmarks and links for third-party internet
sites. You may also access other third-party sites through your device. Third-
party sites are not affiliated with Nokia, and Nokia does not endorse or assume
liability for them. If you choose to access such sites, you should take precautions
for security or content.
■Presenter
The presenter enables you to control slide presentations (compatible
with Microsoft Office PowerPoint), a software DVD, an MP3 player, or
other PC applications remotely from your device.
To use applications other than slide presentations and desktop mode,
you must create a corresponding custom profile on the PC application.
Before you can use the application you must do the following:
1. Install the Nokia Presenter PC application on your PC.
This component is available for download on the Nokia website. See
Nokia support, 9.
2. Launch and configure the PC component. Make sure that the
selected incoming Bluetooth serial port (COM port) corresponds to
the one defined in the Bluetooth software settings on the Bluetooth
device of your PC. For details, refer to the PC component
documentation and Set up a Bluetooth connection, 49.
3. Open the slide presentation, or start the application you want to
control remotely from your phone.
FCC Draft
SIM services
78
Select Applications > Collection > Presenter > Open > Connect and the
device you want to connect.
When the Bluetooth Connection Successful dialog appears on your PC
screen, you must click on it to confirm the Bluetooth connection.
The list of available application types is displayed. Select Open to access
the desired application. Select Options > Settings to set the Speaker
notes size for the speaker notes, and Presentation timer (in minutes) to
optimize the slide presentation time available. To save the settings,
select Options > Back.
After you select the slide presentation, browse or skip slides, or jump
ahead by using the scroll key. To view your speaker notes, select Notes.
To point things out on the slides, select Pointer to activate a small black
round marker that you control with the scroll key. Select Options >
Slide list to return to the slide list. Select Options > Applications list to
return to the list of applications.
To control the mouse pointer (the cursor) remotely from the phone,
select the desktop mode. After you open the desktop, the phone
automatically controls your mouse pointer. To return to the list of
applications, select Options > Applications list.
To quit the presenter, select Options > Exit.
16. SIM services
Your SIM card may provide additional services. You can
access this menu only if it is supported by your SIM card. The name and
contents of the menu depend on the available services.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
To set the phone to show you the confirmation messages sent between
your phone and the network when you are using the SIM services, select
Menu > Settings > Phone > Confirm SIM service actions > Yes.
Accessing these services may involve sending messages or making a
phone call for which you may be charged.
FCC Draft
Web
79
17. Web
You can access various mobile internet services with your
phone browser.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Check the availability of these services, pricing, and instructions with
your service provider.
With the phone browser you can view the services that use wireless
markup language (WML) or extensible hypertext markup language
(XHTML) on their pages. Appearance may vary due to screen size. You
may not be able to view all details of the internet pages.
■Set up browsing
You may receive the configuration settings required for browsing as a
configuration message from the service provider that offers the service
that you want to use. See Configuration settings service, 9. You can also
enter all the configuration settings manually. See Configuration, 55.
■Connect to a service
Ensure that the correct configuration settings of the service are
activated.
1. To select the settings for connecting to the service, select Menu >
Web > Settings > Configuration settings.
2. Select Configuration. Only the configurations that support browsing
service are shown. Select a service provider, Default, or Personal
config. for browsing. See Set up browsing, 79.
3. Select Account and a browsing service account contained in the
active configuration settings.
4. Select Display terminal window > Yes to perform manual user
authentication for intranet connections.
Make a connection to the service in one of the following ways:
• Select Menu > Web > Home; or in the standby mode, press and hold
0.
FCC Draft
Web
80
• To select a bookmark of the service, select Menu > Web >
Bookmarks.
• To select the last URL, select Menu > Web > Last web address.
• To enter the address of the service, select Menu > Web > Go to
address. Enter the address of the service, and select OK.
■Browse pages
After you make a connection to the service, you can start browsing its
pages. The function of the phone keys may vary in different services.
Follow the text guides on the phone display. For more information,
contact your service provider.
Browse with phone keys
To browse through the page, scroll in any direction.
To select an item, press the call key, or select Select.
To enter letters and numbers, press the 0 to 9 keys. To enter special
characters, press *.
Direct calling
While browsing, you can make a phone call, and save a name and a
phone number from a page.
■Bookmarks
You can save page addresses as bookmarks in the phone memory.
1. While browsing, select Options > Bookmarks; or in the standby
mode, select Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it, or press the call key to make a
connection to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; to create
a new bookmark; or to save the bookmark to a folder.
The third-party applications provided with your device may have been created
and may be owned by persons or entities not affiliated with or related to Nokia.
Nokia does not own the copyrights or intellectual property rights to the third-
party applications. As such, Nokia does not take any responsibility for end-user
support, functionality of the applications, or the information in the applications
FCC Draft
Web
81
or these materials. Nokia does not provide any warranty for the third-party
applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE
PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Receive a bookmark
When you have received a bookmark that is sent as a bookmark, 1
bookmark received is displayed. To view the bookmark, select Show.
■Appearance settings
While browsing, select Options > Other options > Appear. settings; or in
the standby mode, select Menu > Web > Settings > Appearance
settings and from the following options:
Text wrapping — to select how the text shall appear on the display
Font size — to set the font size
Show images > No — to hide images on the page
Alerts > Alert for unsecure connection > Yes — to set the phone to alert
when a secure connection changes to an unsecure one during browsing
Alerts > Alert for unsecure items > Yes — to set the phone to alert when
a secure page contains an unsecure item. These alerts do not guarantee
a secure connection. For more information, see Browser security, 83.
Character encoding > Content encoding — to select the encoding for the
browser page content
Character encoding > Unicode (UTF-8) web addresses > On — to set the
phone to send a URL as a UTF-8 encoding
Screen size > Full or Small— to set the screen layout
Show page title > Yes or No— to set the phone to display the title of the
web page.
FCC Draft
Web
82
JavaScript > Enable — to enable the Java scripts
■Security settings
Cookies
A cookie is data that a site saves in the cache memory of your phone.
Cookies are saved until you clear the cache memory. See Cache memory,
83.
While browsing, select Options > Other options > Security > Cookie
settings; or in the standby mode, select Menu > Web > Settings >
Security settings > Cookies. To allow or prevent the phone from
receiving cookies, select Allow or Reject.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure
page. The phone supports WML scripts.
While browsing, to allow the scripts, select Options > Other options >
Security > WMLScript sett.; or in the standby mode, select Menu >
Web > Settings > Security settings > WMLScripts over secure
connection > Allow.
■Download settings
To automatically save all downloaded files in Gallery, select Menu >
Web > Settings > Downloading settings > Automatic saving > On.
■Service inbox
The phone is able to receive service messages sent by your service
provider (network service). Service messages are notifications (for
example, news headlines), and they may contain a text message or an
address of a service.
To access the Service inbox in the standby mode, when you have
received a service message, select Show. If you select Exit, the message
is moved to the Service inbox. To access the Service inbox later, select
Menu > Web > Service inbox.
To access the Service inbox while browsing, select Options > Other
options > Service inbox. Scroll to the message you want, and to activate
FCC Draft
Web
83
the browser and download the marked content, select Retrieve. To
display detailed information on the service notification or to delete the
message, select Options > Details or Delete.
Service inbox settings
Select Menu > Web > Settings > Service inbox settings.
To set whether you want to receive service messages, select Service
messages > On or Off.
To set the phone to receive service messages only from content authors
approved by the service provider, select Message filter > On. To view the
list of the approved content authors, select Trusted channels.
To set the phone to automatically activate the browser from the standby
mode when the phone has received a service message, select Automatic
connection > On. If you select Off, the phone activates the browser only
after you select Retrieve when the phone has received a service
message.
■Cache memory
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache.
To empty the cache while browsing, select Options > Other options >
Clear the cache; in the standby mode, select Menu > Web > Clear the
cache.
■Browser security
Security features may be required for some services, such as online
banking or shopping. For such connections you need security
certificates and possibly a security module, which may be available on
your SIM card. For more information, contact your service provider.
Security module
The security module improves security services for applications
requiring a browser connection, and allows you to use a digital
signature. The security module may contain certificates as well as
FCC Draft
Web
84
private and public keys. The certificates are saved in the security module
by the service provider.
To view or change the security module settings, select Menu >
Settings > Security > Security module settings.
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased security.
The existence of a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown even if the certificate
should be valid, check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
There are three kinds of certificates: server certificates, authority
certificates, and user certificates. You may receive these certificates
from your service provider. Authority certificates and user certificates
may also be saved in the security module by the service provider.
To view the list of the authority or user certificates downloaded into
your phone, select Menu > Settings > Security > Authority certificates
or User certificates.
is displayed during a connection, if the data transmission between
the phone and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Digital signature
You can make digital signatures with your phone if your SIM card has a
security module. Using the digital signature can be the same as signing
your name to a paper bill, contract, or other document.
FCC Draft
PC connectivity
85
To make a digital signature, select a link on a page, for example, the title
of the book you want to buy and its price. The text to sign, which may
include the amount and date, is shown.
Check that the header text is Read and that the digital signature icon
is shown.
If the digital signature icon does not appear, there is a security breach,
and you should not enter any personal data such as your signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll
through and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN. The
digital signature icon disappears, and the service may display a
confirmation of your purchase.
18. PC connectivity
You can send and receive e-mail, and access the Internet when your
phone is connected to a compatible PC through a Bluetooth or a data
cable connection. You can use your phone with a variety of PC
connectivity and data communications applications.
■Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes, and
to-do notes between your phone and the compatible PC or a remote
internet server (network service). You may find more information and PC
Suite on the Nokia website at www.nokia.com/support or your local
Nokia website.
■Packet data, HSCSD, and CSD
With your phone you can use the packet data, high-speed circuit
switched data (HSCSD), and circuit switched data (CSD, GSM data) data
services. For availability and subscription to data services, contact your
network operator or service provider. See Modem settings, 50.
FCC Draft
Battery information
86
The use of HSCSD services consumes the phone battery faster than
normal voice or data calls.
■Bluetooth
Use the Bluetooth technology to connect your compatible laptop to the
internet. Your phone must have activated a service provider that
supports internet access and your PC has to support Bluetooth PAN
(personal area network profile). After connecting to the network access
point (NAP) service of the phone and pairing with your PC your phone
automatically opens a packet data connection to the internet. PC Suite
software installation is not necessary when using the NAP service of the
phone.
See Bluetooth wireless technology, 48.
■Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
For better performance during data calls, place the phone on a
stationary surface with the keypad facing downward. Do not move the
phone by holding it in your hand during a data call.
19. Battery information
■Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device.
FCC Draft
Battery information
87
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger and
then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not
allow the liquid to come in contact with the skin or eyes. In the event of such a
leak, flush your skin or eyes immediately with water, or seek medical help.
■Nokia battery authentication
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, and
inspect the hologram label using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of
the battery. If you have any reason to believe that your battery is not an
authentic, original Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for assistance. Your
FCC Draft
Care and maintenance
88
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2. When you angle the hologram left, right, down, and
up, you should see 1, 2, 3, and 4 dots on each side
respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
FCC Draft
Additional safety information
89
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Do not touch the main display with hard or angular materials. Objects like
earrings or jewelry may scratch the display.
• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
• To reset the device from time to time for optimum performance, power off
the device and remove the battery.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
FCC Draft
Additional safety information
90
against the ear or when positioned at least 2.2 centimeters (7/8 inch) away from
the body. When a carry case, belt clip or holder is used for body-worn operation,
it should not contain metal and should position the device the above-stated
distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of
15.3 centimeters (6 inches) should be maintained between a wireless device and
an implanted medical device, such as a pacemaker or implanted cardioverter
defibrillator to avoid potential interference with the medical device. Persons who
have such devices should:
• Always keep the wireless device more than 15.3 centimeters (6 inches) from
the medical device when the wireless device is turned on
• Do not carry the wireless device in a breast pocket
• Hold the wireless device to the ear opposite the medical device to minimize
the potential for interference.
• Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
• Read and follow the directions from the manufacturer of their implanted
medical device.
If you have any questions about using your wireless device with an implanted
medical device, consult your health care provider.
FCC Draft
Additional safety information
91
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless devices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities and areas where the air contains chemicals or
particles such as grain, dust, or metal powders. You should check with the
manufacturers of vehicles using liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely used in their vicinity.
FCC Draft
Additional safety information
92
■Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in the offline or flight mode, you
must change the profile to activate the phone function before you can make an
emergency call. Consult this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
FCC Draft
Additional safety information
93
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is x.xx W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.33 W/kg and when properly worn
on the body is 0.85 W/kg. Information about this device model can be found
at http://www.fcc.gov/oet/fccid by searching the equipment authorization
system using FCC ID QMNRM-276.
FCC Draft
94
Index
NUMERICS
1-touch dialing 26, 44
A
access codes 8
accessories. See enhancements.
active standby 22, 46
active standby key 48
alarm clock 68
analog clock Mini display 21
analog clock mini display 21
antenna 17
applications 76
audio messages 34
B
battery
authentication 87
charging 14
charging, discharging 86
installation 10
blacklist 37
Bluetooth 48, 86
bookmarks 80
browser 79, 80, 81, 82
business cards 43
C
cache memory 83
calculator 70
calendar 69
call
functions 25
log 44
options 27
settings 53
waiting 27
call register. See call log.
calls 25, 26
camera
effects 65
filter 65
settings 65
take an image 64
certificates 84
character case 27
charge the battery 14
clock settings 47
codes 8
configuration 55
setting service 9
settings 16
contact information 9
contacts 41, 42, 43, 44
cookies 82
countdown timer 71
customer service 9
D
data
communication 86
transfer 51
data cable 52
date settings 47
delete messages 38
digital signature 84
display 21, 22
downloads 9, 82
E
EGPRS 50
e-mail application 35
emergency calls 92
end
call 25
enhancements 7, 54
equalizer 68
explosive environments 91
F
factory settings 57
flash messages 33
fold animation 46
font size 46
G
gallery 57
games 76
GPRS 50
FCC Draft
95
H
handsfree. See loudspeaker.
hearing aid 91
I
image 64
IMAP4 35
indicators 23
info messages 38
installation
battery 10
SIM card 10
instant messaging 72
internet 79
J
junk folder 37
K
keyguard 25
keypad lock 25
keys 25
L
language settings 53
lights 55
log 44
loudspeaker 27
M
main display 22, 46
maintenance 88
memory card 13
memory full 34
menu 29
message center number 31
message folder 35
message settings 38, 39, 40, 41
messages
audio message 34
delete 38
flash message 33
info messages 38
length indicator 31
message settings 38
service commands 38
text 31
voice message 38
mini display 21, 47
MMS. See multimedia messages.
multimedia messages 32
music player 65
settings 66
N
navigation 29
navigation key 48
network
name on display 22
services 6
network mode 21, 22
Nokia contact information 9
notes 69, 70
numbers 44
O
offline mode 25
organizer 68
overview functions 7
P
pacemakers 90
packet data 50, 85
parts 20
PC connectivity 85
PC Suite 85
phone
configuration 55
keys 20
open 15
parts 20
settings 53
phone lock. See keypad lock.
PIN codes 8, 16
plug and play service 16
POP3 35
predictive text input 28
presenter 77
profiles 45
PTT 58
PUK codes 8
Push to talk. See PTT.
pushed messages 82
R
recorder 67
restriction password 8
ringing tones 46
FCC Draft
96
S
safety information 5, 89
SAR 92
scrolling 29
security
codes 8
module 83
settings 56
service
commands 38
inbox 82
messages 82
numbers 44
services 79
settings
active standby 46
call 53
camera 65
clock 47
configuration 55
connectivity 48
data transfer 51
date 47
downloads 82
enhancements 54
fold animation 46
GPRS, 3G 50
main display 46
messages 38
mini display 47
music player 66
my shortcuts 47
phone 53
profiles 45
PTT 63
PTT configuration 63
restore factory settings 57
security 56
service inbox 83
themes 45
time 47
tones 46
USB data cable 52
wallpaper 46
shared memory 7
shortcuts 47
signal strength 21, 22
SIM
card 25
card installation 10
messages 38
services 78
SMS. See text messages
spam filter 37
standby mode 21, 47
status indicators 21, 22
stereo widening 68
stopwatch 71
strap 18
switch on and off 16
synchronization 51
T
take an image 64
text 27, 28, 29
text message 31
themes 45
time settings 47
to-do list 70
tones 46
traditional text input 29
U
unlock keypad 25
UPIN 16
USB data cable 52
V
vehicles 91
voice
commands 48
dialing 26
messages 38
recorder 67
W
wallpaper 46
Web 79
wireless markup language 79
wrist strap 18
write text 27
X
XHTML 79
FCC Draft