Microsoft RM-277 GSM850/900/1800/1900 WCDMA 850/1900 Phone with BT User Manual
Microsoft Mobile Oy GSM850/900/1800/1900 WCDMA 850/1900 Phone with BT
Manual
Nokia 3555 User Guide
FCC Draft
Model 3555c - 23 April 2007
2
Issue 1, Part No. XXXXXX
Copyright © 2007 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia, Visual Radio, Nokia Connecting People, and NaviTM key are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned herein may
be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C)
1997-2007. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA
Security.
Java is a trademark of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial
activity and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information
including that relating to promotional, internal and commercial uses may be obtained from
MPEG LA, LLC. See <http://www.mpegla.com>.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
This device complies with Directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
FCC Draft
Model 3555c - 23 April 2007
3
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
Export controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user's authority to operate this equipment.
FCC Draft
Model 3555c - 23 April 2007
Contents
4
Contents
For your safety....................................................................................................... 5
General information............................................................................................. 8
1. Get started ......................................................................................................... 9
2. Your device....................................................................................................... 16
3. Call functions.................................................................................................. 21
4. Write text......................................................................................................... 23
5. Messaging ........................................................................................................ 25
6. Contacts............................................................................................................ 38
7. Log...................................................................................................................... 41
8. Settings............................................................................................................ 41
9. Gallery ............................................................................................................... 52
10.Media................................................................................................................ 54
11.Organizer......................................................................................................... 57
12.Push to talk..................................................................................................... 60
13.Applications.................................................................................................... 66
14.SIM services.................................................................................................... 67
15.Web................................................................................................................... 67
16.PC connectivity.............................................................................................. 73
17.Battery information...................................................................................... 74
Care and maintenance ...................................................................................... 78
Additional safety information......................................................................... 79
Index....................................................................................................................... 84
FCC Draft
Model 3555c - 23 April 2007
For your safety
5
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless device use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Do not use the device at a refuelling point. Do not use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
FCC Draft
Model 3555c - 23 April 2007
For your safety
6
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the device is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■About your device
The wireless device described in this guide is approved for use on the WCDMA
850 and 1900, and GSM 850, 900, 1800, and 1900 networks. Contact your
service provider for more information about networks.
When using the features in this device, obey all laws and respect the privacy and
legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■Network services
To use the device you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
FCC Draft
Model 3555c - 23 April 2007
For your safety
7
device may also have been specially configured for your network provider. This
configuration may include changes in menu names, menu order and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as multimedia messaging (MMS),
browsing, e-mail application, instant messaging, presence enhanced contacts,
remote synchronization, and content downloading using the browser or MMS,
require network support for these technologies.
■Shared memory
The following features in this device may share memory: gallery, contacts, text
messages, multimedia messages, and instant messages, e-mail, calendar, to-do
notes, JavaTM games and applications, and note application. Use of one or more of
these features may reduce the memory available for the remaining features
sharing memory. For example, saving many Java applications may use all of the
available memory. Your device may display a message that the memory is full
when you try to use a shared memory feature. In this case, delete some of the
information or entries stored in the shared memory features before continuing.
Some of the features, such as text messages, may have a certain amount of
memory specially allotted to them in addition to the memory shared with other
features.
■Enhancements
A few practical rules about accessories and enhancements
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
FCC Draft
Model 3555c - 23 April 2007
General information
8
General information
■Overview of functions
Your device provides many functions that are practical for daily use, such as text
and multimedia messaging, calendar, clock, alarm clock, music player, and built-
in camera. Your device also supports the following functions:
• Plug and play online service to get the configuration settings. See Plug and
play service p. 14 and Configuration settings service p. 8.
• Active standby. See Active standby p. 18.
• Audio messaging. See Nokia Xpress audio messaging p. 28.
• Instant messaging. See Instant messaging p. 31.
• E-mail application. See E-mail application p. 29.
• Enhanced voice dialing. See Enhanced voice dialing p. 22 and Voice
commands p. 43.
• Java 2 Platform, Micro Edition (J2METM). See Applications p. 66.
■Configuration settings service
To use some of the network services, such as mobile Internet services, MMS,
Nokia Xpress audio messaging, or remote Internet server synchronization, your
device needs the correct configuration settings. For more information on
availability, contact your network operator, service provider, nearest authorized
Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/
support.
When you have received the settings as a configuration message, and the
settings are not automatically saved and activated, Configuration sett. received
%U is displayed.
To save the settings, select Show > Save. If required, enter the PIN code supplied
by the service provider.
To discard the received settings, select Exit or Show > Discard.
■Download content
You may be able to download new content (for example, themes) to the device
(network service).
For the availability of different services and pricing, contact your service provider.
FCC Draft
Model 3555c - 23 April 2007
Get started
9
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■Nokia support
Check www.nokia.com/support or your local Nokia website for the latest version
of this guide, additional information, downloads, and services related to your
Nokia product.
On the website, you can get information on the use of Nokia products and
services. If you need to contact customer service, check the list of local Nokia
Care contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia service center at
www.nokia.com/repair.
1. Get started
■Install SIM card and battery
Always switch the device off and disconnect the charger before removing the
battery.
Keep all SIM cards out of the reach of small children.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
This device is intended for use with BL-5C battery. Always use original Nokia
batteries. See Nokia battery authentication p. 75.
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
To remove the back cover of the
device, press sightly (1) and slide
the cover (2).
FCC Draft
Model 3555c - 23 April 2007
Get started
10
Remove the battery as shown.
To open the SIM card holder,
press slightly (1) and lift the
holder (2).
Insert the SIM card properly into
the holder.
Close the SIM card holder.
FCC Draft
Model 3555c - 23 April 2007
Get started
11
Replace the battery.
Replace the back cover (1).
Slide the back cover into its
place (2).
■Insert a microSD card
Keep all microSD memory cards out of the reach of small children.
A microSD card can be loaded with ringing tones, themes,
tones, images and videos. If you delete, reload, or replace this
card, these functions and features may not function properly.
Use only compatible microSD cards with this device. Other memory cards, such as
Reduced Size MultiMedia cards, do not fit in the microSD card slot and are not
compatible with this device. Using an incompatible memory card may damage
the memory card as well as the device, and data stored on the incompatible card
may be corrupted.
FCC Draft
Model 3555c - 23 April 2007
Get started
12
Use only microSD cards approved by Nokia for use with this device. Nokia utilizes
the approved industry standards for memory cards but not all other brands may
function correctly or be fully compatible with this device.
Important: Do not remove a microSD card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an
operation may damage the memory card as well as the device, and data
stored on the card may be corrupted.
1. Remove the back
cover and the
battery of the
device. Slide the
microSD memory
card holder down
(1) and flip the card
holder up (2).
2. Insert the card into
the memory card
holder with the
gold-colored
contact area facing
up (3).
3. Close the card
holder (4 and 5),
reinsert the battery
and slide the back
cover back in place.
■Charge the battery
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from an AC-3, AC-4, or AC-5 charger.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
FCC Draft
Model 3555c - 23 April 2007
Get started
13
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
1. Connect the charger to a wall
socket.
2. Connect the charger to your
device.
A CA-44 charging adapter can
be used with older charger
models.
If the battery is completely
discharged, it may take a few minutes before the charging indicator appears on
the display or before any calls can be made.
The charging time depends on the charger used. Charging a BL-5C battery with
the AC-3 charger takes approximately 2 hours and 20 minutes while the device is
in the standby mode.
■Open and close the device
You open and close the device manually. When you open the fold of the device, it
opens up to approximately 165 degrees. Do not try to force the fold open more.
Depending on the Theme a tone sounds when you open and close the device.
■Switch the device on and off
Warning: Do not switch the device on
when wireless device use is prohibited or
when it may cause interference or
danger.
To switch the device on or off, press and hold the
power key. See Keys and parts p. 16.
If the device asks for a PIN or a UPIN code, enter
the code (displayed as ****), and select OK.
FCC Draft
Model 3555c - 23 April 2007
Get started
14
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of the time
difference with respect to Greenwich Mean Time (GMT), and enter the date. See
Time and date p. 43.
Plug and play service
When you switch on your device for the first time, and the device is in the
standby mode, you are asked to get the configuration settings from your service
provider (network service). Confirm or decline the query. See Configuration
settings service p. 8.
■Connect a headset
You can connect an HS-47
headset to your device.
Connect the headset to the
device as shown.
■Antenna
Your device has an internal antenna located at the bottom of
the device. Avoid contact with the antenna area.
FCC Draft
Model 3555c - 23 April 2007
Get started
15
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched on.
Contact with the antenna affects call quality
and may cause the device to operate at a
higher power level than otherwise needed.
Avoiding contact with the antenna area when
operating the device optimizes the antenna
performance and the battery life.
■Device strap
Remove the back cover of the device.
Insert a thread through the eyelet.
Place the thread around the post of
the device as shown in the picture.
Tighten the thread. Put the back
cover back in place.
FCC Draft
Model 3555c - 23 April 2007
Your device
16
2. Your device
■Keys and parts
1) Earpiece 9) Camera key
2) Camera 10) Volume and PTT key
3) Main display 11) Micro USB connector
4) Mini display 12) Charger connector
5) NaviTM key (scroll key) 13) Call key
6) Right selection key 14) Left selection key
7) End key and power key 15) Headset connector
8) Keypad
FCC Draft
Model 3555c - 23 April 2007
Your device
17
■Navigate the menus
The device offers you an extensive range of functions, which are grouped into
menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List or Grid.
To rearrange the menu, scroll to the menu you want to move, and select
Options > Organize > Move. Scroll to where you want to move the menu,
and select OK. To save the change, select Done > Yes.
2. Scroll through the menu, and select an option (for example, Settings).
3. If the selected menu contains further submenus, select the one you want (for
example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu, select
Exit.
■Standby mode
When the device is ready for use, and you have not entered any characters, the
device is in the standby mode.
Mini display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6 Clock and date or profile
FCC Draft
Model 3555c - 23 April 2007
Your device
18
Main display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6Clock
7Main display
8The left selection key is Go to or a shortcut to
another function. See My shortcuts p. 43.
9The middle selection key mode is Menu.
10 The right selection key may be Names to access the list of contacts in the
Contacts menu, an operator-specific name to access an operator-specific
website, or a shortcut to a function that you selected. See My shortcuts p. 43.
Active standby
In the active standby mode there is a list of selected device features and
information on the screen that you can directly access in the standby mode. To
switch on or off the mode, select Menu > Settings > Main display > Active
standby > Active standby mode > On or Off.
In the active standby mode, scroll up or down to navigate the list. Left and right
arrows at the beginning and end of a line indicate that further information is
available by scrolling left or right. To end the active standby navigation mode,
select Exit.
To organize and change the active standby mode, activate the navigation mode,
and select Options > Personalize view.
Indicators
You have unread messages.
You have unsent, canceled or failed messages.
The device registered a missed call.
FCC Draft
Model 3555c - 23 April 2007
Your device
19
, Your device is connected to the instant messaging service, and the
availability status is online or offline.
You received one or several instant messages.
The keypad is locked.
The device does not ring for an incoming call or text message.
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running.
, The device is registered to the GPRS or EGPRS network.
, A GPRS or EGPRS connection is established.
, The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
, Push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to the
device.
Calls are limited to a closed user group.
The timed profile is selected.
, , , or
A headset, handsfree, loopset, or music stand enhancement is
connected to the device.
■Flight mode
You can deactivate all radio frequency functions and still have access to offline
games, calendar, and phone numbers. Use the flight mode in radio sensitive
environments—on board aircraft or in hospitals. When the flight mode is active,
is shown.
Select Menu > Settings > Profiles > Flight > Activate or Customize.
FCC Draft
Model 3555c - 23 April 2007
Your device
20
To deactivate the flight mode, select any other profile.
In the flight mode you can make an emergency call. Enter the emergency number,
press the call key, and select Yes when asked Exit flight profile? The device
attempts to make an emergency call.
When the emergency call ends, the device automatically changes to the general
profile mode.
■Keypad lock (keyguard)
Select Menu or Unlock (1), and press * (2) within
1.5 seconds to lock or unlock the keypad.
If the security keyguard is activated, enter the
security code if requested.
To answer a call when the keyguard is on, press the
call key or open the device. When you end or reject
the call, the keypad automatically locks.
For Security keyguard, see Phone p. 48.
When the keyguard is on, calls still may be possible
to the official emergency number programmed into
your device.
■Functions without a SIM card
Several functions of your device may be used without installing a SIM card (for
example, the data transfer with a compatible PC or another compatible device).
Without a SIM card, some functions appear dimmed in the menus and cannot be
used.
For an emergency call, some networks may require that a valid SIM card is
properly inserted in the device.
■Access codes
Security code
The security code (5 to 10 digits) helps to protect your device against
unauthorized use. The preset code is 12345. To change the code, and to set the
device to request the code, see Security p. 50.
FCC Draft
Model 3555c - 23 April 2007
Call functions
21
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorized use. See Security p. 50.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required
for some functions.
The module PIN is required to access the information in the security module. See
Security module p. 72.
The signing PIN is required for the digital signature. See Digital signature p. 72.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking
key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN
code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2
code. If the codes are not supplied with the SIM card, contact your local service
provider for the codes.
Restriction password
The restriction password (4 digits) is required when using the Call restrictions.
See Security p. 50.
3. Call functions
■Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code, the
area code without the leading 0, if necessary, and the phone number.
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to decrease
press the volume down key.
FCC Draft
Model 3555c - 23 April 2007
Call functions
22
3. To end the call or to cancel the call attempt, press the end key, or close the
device.
To search for a name or phone number that you have saved in Contacts, see
Search for a contact p. 38.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See 1-touch
dialing p. 40. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the
call begins. See 1-touch dialing in Call p. 48.
Enhanced voice dialing
To make a call you can say the name saved in the contact list of the device. Voice
commands are language-dependent. To set the language, see Voice recognition
language in Phone p. 48.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
1. To make a call using voice dialing, in the standby mode, press and hold the
volume down key. A short tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a list
with matches is shown. The device plays the voice command of the match on
the top of the list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected device function is similar to
voice dialing. See Voice commands in My shortcuts p. 43.
■Answer or decline a call
To answer an incoming call, press the call key, or open the device. To end the call,
press the end key or close the device.
To decline an incoming call, press the end key or close the device. To reject an
incoming call when the device is closed, press and hold a volume key.
FCC Draft
Model 3555c - 23 April 2007
Write text
23
To mute the ringing tone, press a volume key when the device is closed, or select
Silence when the device is open.
Call waiting
To answer the waiting call during an active call, press the call key. The first call is
put on hold. To end the active call, press the end key.
To activate the Call waiting function, see Call p. 48.
■Options during a voice call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options and from the following: Mute or Unmute, Contacts,
Menu, Lock keypad, Record, Loudspeaker or Handset.
Network services options are Answer or Decline, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer calls — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call of up to five persons
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
4. Write text
You can enter text (for example, when writing messages) using traditional or
predictive text input. When you write text, text input indicators appear at the top
of the display. indicates traditional text input. indicates predictive
text input. Predictive text input allows you to write text quickly using the device
keypad and a built-in dictionary. You can enter a letter with a single keypress.
indicates predictive text input with Word suggestions. The device predicts
and completes the word before you enter all the characters.
FCC Draft
Model 3555c - 23 April 2007
Write text
24
, , or appears next to the text input indicator, indicating the character
case. To change the character case, press #.
indicates number mode. To change from the letter to number mode, press
and hold #, and select Number mode.
To set the writing language while writing text, select Options > Writing
language.
■Predictive text input
To set predictive text input on, select Options > Prediction option > Prediction >
On.
Tip: To quickly set predictive text input on or off when writing text, press
# twice, or select and hold Options.
To select the prediction input type, select Options > Prediction option >
Prediction type > Normal or Word sugg.
1. Start writing a word using the 2 to 9 keys. Press each key only once for one
letter. The entered letters are displayed underlined.
If you selected Word suggestions as prediction type, the device starts to
predict the word you are writing. After you enter a few letters, and if these
entered letters are not a word, the device tries to predict longer words. Only
the entered letters are displayed underlined.
To insert a special character, press and hold *, or select Options > Insert
symbol. Scroll to a character, and select Insert.
To write compound words, enter the first part of the word; to confirm it, press
the scroll key right. Write the next part of the word and confirm the word.
To enter a full stop, press 1. If the character is not correct, press * repeatedly.
2. When you finish writing the word and it is correct, to confirm it, press 0 to
add space.
If the word is not correct, press * repeatedly. When the word that you want
appears, select the word.
If the ? character is displayed after the word, the word you intended to write
is not in the dictionary. To add the word to the dictionary, select Spell.
Complete the word (traditional text input is used), and select Save.
FCC Draft
Model 3555c - 23 April 2007
Messaging
25
■Traditional text input
To set traditional text input on, select Options > Prediction
options >Prediction > Off.
Press a number key, 1 to 9, repeatedly until the desired character appears. Not all
characters available under a number key are printed on the key. The characters
available depend on the selected writing language.
If the next letter you want is located on the same key as the present one, wait
until the cursor appears.
The most common punctuation marks and special characters are available under
the 1 key. For more characters, press *.
5. Messaging
You can read, write, send, and save text, multimedia, e-mail,
audio, and flash messages. All messages are organized into folders.
■Text messages
With the short message service (SMS) you can send and receive text messages,
and receive messages that can contain pictures (network service).
Before you can send any text or SMS e-mail messages, you must save your
message center number. See Message settings p. 35.
To check SMS e-mail service availability and to subscribe to the service, contact
your service provider. To save an e-mail address in Contacts, see Search for a
contact p. 38.
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. Characters that use accents or
other marks, and characters from some language options like Spanish, take up
more space limiting the number of characters that can be sent in a single
message.
An indicator at the top of the display shows the total number of characters left
and the number of messages needed for sending. For example, 673/2 means that
there are 673 characters left and that the message is sent as a series of two
messages.
FCC Draft
Model 3555c - 23 April 2007
Messaging
26
Write and send a message
1. Select Menu > Messaging > Create message > Message.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
3. Write your message in the Message: field.
4. To send the message, select Send. See Messaging p. 25.
Read and reply to a message
1. To view a received message, select Show. To view it later, select Exit.
To read the message later, select Menu > Messaging > Inbox.
2. To reply to a message, select Reply. Write the reply message.
3. To send the message, select Send. See Messaging p. 25.
■Multimedia messages
Note: Only devices that have compatible features can receive and
display multimedia messages. The appearance of a message may vary
depending on the receiving device.
A multimedia message can contain some attachments.
To check availability and to subscribe to the multimedia messaging network
service, contact your service provider.
Write and send a multimedia message
The wireless network may limit the size of multimedia messages. If the inserted
image exceeds this limit, the device may make it smaller so that it can be sent by
multimedia messaging service (MMS).
1. Select Menu > Messaging > Create message > Message.
2. Write your message. To add a file, select Insert and add the file.
3. To view the message before sending it, select Options > Preview.
4. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
5. To send the message, select Send. The device saves the message in the Outbox
folder, and the sending starts.
FCC Draft
Model 3555c - 23 April 2007
Messaging
27
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
Note: When the device is sending the message, the animated is
shown. This is an indication that the message has been sent by your
device to the message center number programmed into your device.
This is not an indication that the message has been received at the
intended destination. For more details about messaging services, check
with your service provider.
If an interruption occurs while the message is being sent, the device tries to
resend the message a few times. If these attempts fail, the message remains in
the Outbox folder. To cancel the sending of the messages in the Outbox folder,
scroll to the desired message, and select Options > Cancel sending.
Read and reply to a message
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
1. To view a received message, select Show. To view it later, select Exit.
2. To view the whole message if the received message contains a presentation,
select Play.
To view the files in the presentation or the attachments, select Options >
Objects or Attachments.
3. To reply to the message, select Options > Reply > Message, E-mail message ,
Flash message, or Audio message. Write the reply message.
4. To send the message, select Send.
■Flash messages
Flash messages are text messages instantly displayed upon reception. Flash
messages are not automatically saved.
To write a message, select Menu > Messaging > Create message > Flash
message. Enter the recipient’s phone number and write your message. To insert a
blinking text into the message, select Options > Insert Symbol > Insert blink char.
to set a marker. The text behind the marker blinks until a second marker is
inserted.
FCC Draft
Model 3555c - 23 April 2007
Messaging
28
A received flash message is indicated with Message: %U and a few words from
the beginning of the message. To read the message, select Read. To extract
numbers and addresses from the current message, select Options > Use detail. To
save the message, select Save and the folder in which you want to save it.
■Nokia Xpress audio messaging
You can use the MMS to create and send an audio message. MMS must be
activated before you can use audio messages.
1. To create a message, select Menu > Messaging > Create message > Audio
message. The recorder opens. To use the recorder, see Voice recorder p. 56.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a
number.
4. To send the message, select Send.
To listen to a received audio message, select Play. If more than one message is
received, select Show > Play. To listen to the message later, select Exit.
■Memory Full
When you receive a message, and the memory for the messages is full, Memory
full. Unable to receive msgs. is shown. To first delete old messages, select OK >
Yes and the folder. Scroll to the desired message, and select Delete. If more
messages are to be deleted, select Mark. Mark all the messages you want to
delete, and select Options > Delete marked.
■Folders
The device saves received messages in the Inbox folder.
Messages that have not yet been sent are saved in the Outbox folder.
To set the device to save the sent messages in the Sent items folder, see Save sent
messages in General settings p. 35.
To edit and send messages that you have written and saved in the Drafts folder,
select Menu > Messaging > Drafts.
You can move your messages to the Saved items folder. To organize your Saved
items subfolders, select Menu > Messaging > Saved items. To add a folder, select
FCC Draft
Model 3555c - 23 April 2007
Messaging
29
Options > Add folder. To delete or rename a folder, scroll to the desired folder,
and select Options > Delete folder or Rename folder.
Your device has templates. To create a new template, save a message as a
template. To access the template list, select Menu > Messaging > Saved items >
Templates.
■E-mail application
The e-mail application uses a packet data connection (network service) to allow
you to access your e-mail account. This e-mail application is different from the
SMS e-mail function. To use the e-mail function on your device, you need a
compatible e-mail system.
You can write, send, and read e-mail with your device. Your device supports POP3
and IMAP4 e-mail servers. This application does not support keypad tones.
Before you can send and retrieve any e-mail messages, you must obtain a new
e-mail account or use your current account. To check the availability of your
e-mail account, contact your e-mail service provider.
Check your e-mail settings with your e-mail service provider. You may receive the
e-mail configuration settings as a configuration message. See Configuration
settings service p. 8.
To activate the e-mail settings, select Menu > Messaging > Message settings >
E-mail messages. See E-mail messages p. 37.
Setting wizard
The setting wizard will start automatically if no e-mail settings are defined in the
device. To enter the settings manually, select Menu > Messaging > E-mail
mailbox > Options > Yes > Create manually.
The Manage accounts options allow you to add, delete, and change the e-mail
settings. Make sure that you have defined the correct preferred access point for
your operator. See Configuration p. 50.
The e-mail application requires an Internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
Write and send an e-mail
You can write your e-mail message before connecting to the e-mail service; or
connect to the service first, then write and send your e-mail.
FCC Draft
Model 3555c - 23 April 2007
Messaging
30
1. Select Menu > Messaging > E-mail message.
2. If more than one e-mail account is defined, select the account from which
you want to send the e-mail.
3. Enter the recipient’s e-mail address, write the subject, and enter the e-mail
message. To attach a file from Gallery, select Options > Insert.
4. To send the e-mail message, select Send > Send now.
To save the e-mail in the Outbox folder to be sent later, select Send > Send
later.
To edit or continue writing your e-mail later, select Options > Save as draft.
The e-mail is saved in Outboxes > Drafts.
To send the e-mail later, select Menu > Messaging > E-mail > Options >
Send now or Send/check e-mail.
Download e-mail
1. To download e-mail messages that have been sent to your e-mail account,
select Menu > Messaging > E-mail > Check new e-mail.
If more than one e-mail account is defined, select the account from which
you want to download the e-mail.
The e-mail application only downloads e-mail headers at first.
2. Select Back > Inboxes, the account name, and the new message, and select
Retrieve to download the complete e-mail message.
To download new e-mail messages and to send e-mail that has been saved in the
Outbox folder, select Options > Send/check e-mail.
Read and reply to e-mail
Important: Exercise caution when opening messages. E-mail messages
may contain malicious software or otherwise be harmful to your device
or PC.
1. Select Menu > Messaging > E-mail > Inboxes, the account name, and the
desired message.
2. To reply to an e-mail, select Reply > Original text or Empty message. To reply
to many, select Options > Reply to all. Confirm or edit the e-mail address and
subject, then write your reply.
FCC Draft
Model 3555c - 23 April 2007
Messaging
31
3. To send the message, select Send > Send now.
E-mail folders
Your device saves e-mail that you have downloaded from your e-mail account in
the Inboxes folder. The Outboxes folder contains the following folders: “Account
name” for incoming e-mail, Archive for archiving e-mail, Custom 1—Custom 3 for
sorting e-mail, Junk where all spam e-mail is stored, Drafts for saving unfinished
e-mail, Outbox for saving e-mail that has not been sent, and Sent items for
saving e-mail that has been sent.
To manage the folders and their e-mail content, select Options to view the
available options of each folder.
Spam filter
To activate and define a spam filter, select Options > Spam filter > Settings in
the main e-mail idle screen. The spam filter allows you to put specific senders on
a black or white list. Black list sender messages are filtered to the Junk folder.
Unknown and white list sender messages are downloaded into the account inbox.
To blacklist a sender, select the e-mail message in the Inboxes folder and
Options > Blacklist sender.
■Instant messaging
With instant messaging (IM) (network service) you can send short, simple text
messages to online users. You have to subscribe to a service and register with the
IM service you want to use. For more information about signing up for IM
services, contact your service provider.
To set the required settings for the IM service, see Connect. settings in Access
p. 31. The icons and texts on the display may vary, depending on the IM service.
Note: Depending on your IM service, you may not have access to all of
the features described in this guide.
Access
Select Menu > Messaging > Instant messages. Instant messages may be replaced
by another term depending on the service provider. If more than one set of
connection settings for IM service is available, select the one you want. Select
from the following options:
FCC Draft
Model 3555c - 23 April 2007
Messaging
32
Login — to connect to the IM service. To set the device to automatically connect
to the IM service when you switch on the device; in the login session, select
Automatic login: > On, or select Menu > Messaging > Instant messages, connect
to the IM service, and select Options > Settings > Automatic login > On.
Saved convers. — to view, erase, or rename the conversations you saved during an
IM session
Connect. settings — to edit the settings needed for messaging and presence.
connection
Connect
To connect to the service, access the instant messages menu, select the IM
service, if needed, and select Login.
To disconnect from the IM service, select Options > Logout.
Sessions
When connected to the service your status as seen by others is shown in a status
line: Status: Online, My status: Busy or Status: App. off. To change own status,
select Change.
Below the status line there are three folders containing your contacts and
showing their status: Convers. (%N), Online (%N) and Offline (%N). To expand
the folder, scroll to it and select Expand (or press scroll right), to collapse the
folder select Collapse (or press scroll left).
Conversations — shows the list of new and read instant messages or invitations
to IM during the active IM session.
indicates a new group message.
indicates a read group message.
indicates a new instant message.
indicates a read instant message.
indicates an invitation.
The icons and texts on the display depend on the IM service.
Online (%N) — shows the number of contacts that are online
Offline (%N) — shows the number of contacts that are offline
To start a conversation, expand the Online (%N) or the Offline (%N) folder and
scroll to the contact with whom you would like to chat and select Chat. To
FCC Draft
Model 3555c - 23 April 2007
Messaging
33
answer an invitation or to reply to a message expand the Conversations folder
and scroll to the contact to whom you would like to chat and select Open. To add
contacts, see Add IM contacts p. 34.
Groups > Public groups (not visible if groups are not supported by the network) —
the list of bookmarks to public groups provided by the service provider is
displayed. To start a IM session with a group, scroll to a group, and select Join.
Enter the screen name that you want to use as your nickname in the
conversation. When you have successfully joined the group conversation, you can
start a group conversation. You can create a private group. See Groups p. 34.
Search > Users or Groups — to search for other IM users or public groups on the
network by phone number, screen name, e-mail address, or name. If you select
Groups, you can search for a group by a member in the group, or by group name,
topic, or ID.
Options > Chat or Join group — to start the conversation when you have found
the user or the group you want.
Accept or reject an invitation
If you receive a new invitation, to read it, select Read. If more than one invitation
is received, select an invitation and Open. To join the private group conversation,
select Accept, and enter the screen name you want to use as your nickname. To
reject or delete the invitation, select Options > Reject or Delete.
Read an instant message
If you receive a new message not associated with an active conversation, New
instant message is displayed. To read it, select Read. If more than one message is
received, select a message, and Open.
New messages received during an active conversation are held in Instant
messages > Conversations. If you receive a message from someone not in IM
contacts, the sender ID is displayed. To save a new contact that is not in the
device memory, select Options > Save contact.
Participate in a conversation
To join or start an IM session, write your message; and select Send.
If you receive a new message during a conversation from a person not taking part
in the current conversation, is displayed, and the device sounds an alert
tone.
Write your message; and select Send. Your message is displayed, and the reply
message is displayed below your message.
FCC Draft
Model 3555c - 23 April 2007
Messaging
34
Add IM contacts
When connected to the IM service, in the IM main menu select Options > Add
contact > By mobile number, Enter ID manually, Search from serv., or Copy from
server (depending on service provider).
Scroll to a contact. To start a conversation, select Chat.
Block or unblock messages
When you are in a conversation and want to block messages, select Options >
Block contact.
To block messages from a specific contact in your contacts list, scroll to the
contact in Conversations, Online (%N) or Offline (%N) and select Options > Block
contact > OK.
To unblock a contact, in the IM main menu select Options > Blocked list. Scroll to
the contact you want to unblock, and select Unblock > OK.
Groups
You can use the public groups provided by the service provider, or create your
own private groups for an IM conversation.
Public
You can bookmark public groups your service provider may maintain. Connect to
the IM service, and select Groups > Public groups. Select a group, and Join. If you
are not in the group, enter your screen name as your nickname for the group. To
delete a group from your list, select Options > Delete group.
To search for a group, select Groups > Public groups > Search groups.
Private
Connect to the IM service, and from the main menu select Options > Create
group. Enter the name for the group and the screen name you want to use as your
nickname. Mark the private group members in the contacts list, and write an
invitation.
■Messages
The voice mailbox is a network service and you may need to subscribe to it. For
more information contact your service provider.
FCC Draft
Model 3555c - 23 April 2007
Messaging
35
To call your voice mailbox, select Menu > Messaging > Voice messages > Listen
to voice messages. To enter, search for, or edit your voice mailbox number, select
Voice mailbox number.
If supported by the network, indicates new voice messages. To call your
voice mailbox number, select Listen.
You can also receive messages on various topics from your service provider
(network service). For more information, contact your service provider. Select
Menu > Messaging > Info messages.
Write and send service requests (also known as USSD commands), such as
activation commands for network services, to your service provider. Select
Menu > Messaging > Service commands.
To delete messages, select Menu > Messaging > Delete messages > By message
to delete single messages, By folder to delete all messages from a folder, or All
messages.
SIM messages are specific text messages saved to your SIM card. You can copy or
move those messages to the device memory, but not vice versa. To read SIM
messages, select Menu > Messaging > Options > SIM messages.
■Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and from the
following options:
Save sent messages > Yes — to set the device to save the sent messages in the
Sent items folder
Overwriting in Sent items > Allowed — to set the device to overwrite the old sent
messages with the new ones when the message memory is full. This setting is
shown only if you set Save sent messages > Yes.
Font size — to select the font size used in messages
Graphical smileys > Yes — to set the device to replace character-based smileys
with graphical ones
FCC Draft
Model 3555c - 23 April 2007
Messaging
36
Text messages
The text message settings affect the sending, receiving, and viewing of text and
SMS e-mail messages.
Select Menu > Messaging > Message settings > Text messages and from the
following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
Message centers > Add center — to set the phone number and name of the
message center that is required for sending text messages. You receive this
number from your service provider.
Message center in use — to select the message center in use
E-mail message centers > Add center — to set the phone numbers and name of
the
e-mail center for sending SMS e-mails.
E-mail center in use — to select the SMS e-mail message center in use
Message validity — to select the length of time for which the network attempts
to deliver your message
Messages sent via — to select the format of the messages to be sent: Text, Page,
or Fax (network service)
Use packet data > Yes — to set GPRS as the preferred SMS bearer
Character support > Full — to select all characters in the messages to be sent as
viewed. If you select Reduced, characters with accents and other marks may be
converted to other characters.
Reply via same center > Yes — to allow the recipient of your message to send you
a reply using your message center (network service)
Multimedia messages
The message settings affect the sending, receiving, and viewing of multimedia
messages. You may receive the configuration settings for multimedia messaging
as a configuration message. See Configuration settings service p. 8. You can also
enter the settings manually. See Configuration p. 50.
Select Menu > Messaging > Message settings > Multimedia msgs. and from the
following options:
Delivery reports > Yes — to ask the network to send delivery reports about your
messages (network service)
FCC Draft
Model 3555c - 23 April 2007
Messaging
37
MMS creation mode - Allows you to select whether or not to create multimedia
messages with restrictions on content. When selecting Restricted receiving
device is more likely to support sent messages. Select Free enables you to add
various types of multimedia to the message.
Image size in MMS — to set the image size in multimedia messages
Default slide timing — to define the default time between slides in multimedia
messages
Allow multimedia reception — to receive or block the multimedia message, select
Yes or No. If you select In home network, you cannot receive multimedia
messages when outside your home network. The default setting of the
multimedia message service is generally In home network. The availability of this
menu depends on your device.
Incoming multi- media messages — to allow the reception of multimedia
messages automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set to No.
Allow advertisements — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No, or Incoming multi- media
messages is set to Reject.
Configuration settings > Configuration — only the configurations that support
multimedia messaging are shown. Select a service provider, Default, or Personal
config. for multimedia messaging. Select Account and an MMS account
contained in the active configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You may receive
the settings as a configuration message. See Configuration settings service p. 8.
You can also enter the settings manually. See Configuration p. 50.
Select Menu > Messaging > Message settings > E-mail messages and from the
following options:
Configuration — to select the set that you want to activate
Account — to select an account provided by the service provider
My name — to enter your name or nickname
E-mail address — to enter your e-mail address
Login information — to enter authentication information used when retrieving
incoming e-mail
FCC Draft
Model 3555c - 23 April 2007
Contacts
38
Incoming mail settings — to enter the number of mails to be retrieved in
maximum
Outgoing mail settings (SMTP) — to enter SMTP (simple mail transfer protocol)
information and setting options used when sending e-mail
Display terminal window > Yes — to perform manual user authentication for
intranet connections
6. Contacts
You can save names and phone numbers (contacts) in the device
memory and in the SIM card memory.
The device memory may save contacts with additional details, such as various
phone numbers and text items. You can also save an image for a limited number
of contacts.
The SIM card memory can save names with one phone number attached to them.
The contacts saved in the SIM card memory are indicated by .
■Save contacts
Make sure that the memory in use is Phone or Phone and SIM. See Settings p. 40.
To save a name and phone number, select Menu > Contacts > Names >
Options > Add new contact.
The first number you save is automatically set as the default number, and it is
indicated with a frame around the number type indicator (for example, ).
When you select a name from contacts (for example, to make a call), the default
number is used unless you select another number.
In the device memory you can save different types of phone numbers, a tone or a
video clip, and short text items for a contact.
■Search for a contact
Select Menu > Contacts > Names. Scroll through the list of contacts, or enter
the first characters of the name you are searching for. Press the call key to call
the number.
FCC Draft
Model 3555c - 23 April 2007
Contacts
39
To save details for a contact, search for the contact to which you want to add a
detail, and select Details > Options > Add detail. Select from the options
available.
■Edit contacts
Select Options > Edit, search for the contact, and select Details to edit a name,
number, text item, or to change the image.
■Delete contacts
To delete all the contacts and the details attached to them from the device or
SIM card memory, select Menu > Contacts > Delete all contacts > From phone
mem. or From SIM card.
To delete a contact, search for the desired contact, and select Options > Delete
contact.
To delete a number, text item, or an image attached to the contact, search for the
contact, and select Details. Scroll to the desired detail, and select Options >
Delete and your desired option.
■Groups
Select Menu > Contacts > Groups to arrange the names and phone numbers
saved in the memory into caller groups with different ringing tones and group
images.
■Synchronize all
Synchronize your calendar, contacts data, and notes with a remote Internet
server (network service). For details see Synchronize from a server p. 47.
■Copy or move contacts
You can move and copy contacts from the device memory to the SIM card
memory, or vice versa. The SIM card can save names with one phone number
attached to them.
To move or copy contacts one by one, select Menu > Contacts > Names. Scroll to
the contact, and select Options > Move contact or Copy contact.
FCC Draft
Model 3555c - 23 April 2007
Contacts
40
To move or copy marked contacts, select Menu > Contacts > Names. Scroll to a
contact, and select Options > Mark. Then mark all other contacts, and select
Options > Move marked or Copy marked.
To move or copy all contacts, select Menu > Contacts > Move contacts or Copy
contacts.
■Business cards
You can send and receive a person’s contact information from a compatible
device that supports the vCard standard as a business card.
To send a business card, search for the contact whose information you want to
send, and select Details > Options > Send bus. card.
When you receive a business card, select Show > Save to save the business card
in the device memory. To discard the business card, select Exit > Yes.
■Settings
Select Menu > Contacts > Settings and from the following options:
Memory in use — to select the SIM card or device memory for your contacts.
Select Phone and SIM to recall names and numbers from both memories. In that
case, when you save names and numbers, they are saved in the device memory.
Contacts view — to select how the names and numbers in Contacts are displayed
Name display — to select whether the contact’s first or last name is displayed
first
Font size — to set the font size for the list of contacts
Memory status — to view the free and used memory capacity
■1-touch dialing
To assign a number to a speed-dialing key, select Menu > Contacts > 1-touch
dialing and scroll to the speed-dialing number you want.
Select Assign, or if a number has already been assigned to the key, select
Options > Change. Select Find and locate the contact you want to assign. If the
1-touch dialing function is off, the device asks whether you want to activate it.
See also 1-touch dialing in Call p. 48.
To make a call using the speed-dialing keys, see 1-touch dialing p. 22.
FCC Draft
Model 3555c - 23 April 2007
Log
41
■Info, service, and my numbers
Select Menu > Contacts and from one of these options:
Info numbers — to call the information numbers of your service provider if the
numbers are included on your SIM card (network service)
Service numbers — to call the service numbers of your service provider if the
numbers are included on your SIM card (network service)
My numbers — to view the phone numbers assigned to your SIM card, if the
numbers are included on your SIM card
7. Log
The device registers your missed, received, and dialed calls if the
network supports it and the device is switched on and within the network service
area.
To view the information on your calls, select Menu > Log > Missed calls,
Received calls, or Dialed numbers. To view your recent missed and received calls
and the dialed numbers chronologically, select Call log. To view the contacts to
whom you most recently sent messages, select Message recipients.
To view the information on your recent communications, select Menu > Log >
Call timers, Packet data counter, or Packet data conn. timer.
To view how many text and multimedia messages you have sent and received,
select Menu > Log > Message log.
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes, and so forth.
Some timers may be reset during service or software upgrades.
8. Settings
■Profiles
Your device has various settings groups called profiles, for which you can
customize the device tones for different events and environments.
FCC Draft
Model 3555c - 23 April 2007
Settings
42
Select Menu > Settings > Profiles, the desired profile and from the following
options: Activate, Customize, or Timed.
■Themes
A theme contains elements for personalizing your device.
Select Menu > Settings > Themes and from the following options: Select theme
orTheme downloads.
■Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones. You can find the same settings in the Profiles
menu. See Customize in Profiles p. 41.
To set the device to ring only for calls from phone numbers that belong to a
selected caller group, select Alert for. Scroll to the caller group you want or All
calls, and select Mark.
Select Options > Save to save the settings or Cancel to leave the settings
unchanged.
If you select the highest ringing tone level, the ringing tone reaches its highest
level after a few seconds.
■Main Display
Select Menu > Settings > Main display and from the available options:
Wallpaper — to add the background image in the standby mode
Active standby — to switch the active standby mode on or off and to organize and
personalize the active standby mode
Standby mode font color — to select the color for the text in the standby mode
Navigation key icons — to display the icons of the current navigation key
shortcuts in the standby mode when active standby is off
Notification details — to display or hide details, such as contact information in a
missed call or message received notifications
Fold animation — to set your device to display an animation when you open and
close the device
Font size — to set the font size for messaging, contacts, and web pages
Operator logo — to set your device to display or hide the operator logo
FCC Draft
Model 3555c - 23 April 2007
Settings
43
Cell info display > On — to display the cell identity, if available from the network
■Mini display
Select Menu > Settings > Mini display. You can change the settings for
Wallpaper, Screen saver, Fold animation, and other settings.
■Time and date
To change the time and date settings, select Menu > Settings > Date and time >
Date and time settings, Date and time format settings, or Auto-update of date &
time (network service).
When traveling to a different time zone, select Menu > Settings > Date and
time > Date and time settings > Time zone and the time zone of your location in
terms of the time difference with respect to Greenwich Mean Time (GMT) or
Universal Time Coordinated (UTC). For example, GMT -5 denotes the time zone
for New York (USA), 5 hours west of Greenwich/London (UK).
■My shortcuts
With personal shortcuts you get quick access to often used functions of the
device.
To select a function from the list, select Menu > Settings > My shortcuts > Left
selection key, Right selection key, Navigation key, or Active standby key
Voice commands
To call contacts and carry out device functions, say the voice commands. Voice
commands are language-dependent. To set the language, see Voice recognition
language in Phone p. 48.
To select the device functions to activate with voice commands, select Menu >
Settings > My shortcuts > Voice commands and a folder. Scroll to a function.
indicates that the voice tag is activated. To activate the voice tag, select Add. To
play the activated voice command, select Playback. To use voice commands, see
Enhanced voice dialing p. 22.
To manage the voice commands, scroll to a device function, and select from the
following options:
Edit or Remove — to change or deactivate the voice command of the selected
function
FCC Draft
Model 3555c - 23 April 2007
Settings
44
Add all or Remove all — to activate or deactivate voice commands to all functions
in the voice commands list
■Connectivity
You can connect the device to a compatible device using a Bluetooth wireless
technology or a USB data cable connection. You can also define the settings for
EGPRS dial-up connections.
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: generic access, network access, generic object exchange,
hands-free, headset, object push, file transfer, dial-up networking, SIM access,
service discovery application profile, advanced audio and distribution profile,
audio/video remote control profile, generic audio/video distribution profile,
personal area network profile, and serial port. To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the device to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth
technology communicate using radio waves, your device and the other devices do
not need to be in direct line-of-sight, although the connection can be subject to
interference from obstructions such as walls or from other electronic devices.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the following
options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth function.
indicates that Bluetooth is activated. When activating Bluetooth technology for
the first time, you are asked to give a name for the device. Use a unique name
that is easy for others to identify.
FCC Draft
Model 3555c - 23 April 2007
Settings
45
Search for audio enhancements — to search for compatible Bluetooth audio
devices. Select the device that you want to connect to the device.
Paired devices — to search for any Bluetooth device in range. Select New to list
any Bluetooth device in range. Select a device, and Pair. Enter an agreed
Bluetooth passcode of the device (up to 16 characters) to associate (pair) the
device to your phone. You must only give this passcode when you connect to the
device for the first time. Your phone connects to the device, and you can start
data transfer.
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth
connection is currently active, select Active devices. To view a list of Bluetooth
devices that are currently paired with the phone, select Paired devices.
Bluetooth settings
To define how your device is shown to other Bluetooth devices, select Menu >
Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility
or My phone's name.
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Only accept Bluetooth communication from other
devices you recognize and have agreed to accept.
Packet data
General packet radio service (GPRS) is a network service that allows mobile
devices to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data connection and from the following options:
When needed — to set the packet data connection to established when an
application needs it. The connection will be closed when the application is
terminated.
Always online — to set the device to automatically connect to a packet data
network when you switch the device on
FCC Draft
Model 3555c - 23 April 2007
Settings
46
Modem settings
You can connect the device using Bluetooth wireless technology or USB data
cable connection to a compatible PC and use the device as a modem to enable
GPRS connectivity from the PC.
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point, and
activate the access point you want to use. Select Edit active access point >
Packet data access point, enter a name to change the access point settings, and
select OK. Select Packet data access point, enter the access point name (APN) to
establish a connection to an network, and select OK.
You can also set the EGPRS dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See Nokia PC Suite p. 73. If you
have set the settings both on your PC and on your device, the PC settings are
used.
Data transfer
Synchronize your calendar, contacts data, and notes with another compatible
device (for example, a mobile phone), a compatible PC, or a remote Internet
server (network service).
Your device allows data transfer with a compatible PC or another compatible
device when using the device without a SIM card.
Transfer contact list
To copy or synchronize data from your phone, the name of the device and the
settings must be in the list of transfer contacts. If you receive data from another
device (for example, a compatible mobile phone), the corresponding transfer
contact is automatically added to the list, using the contact data from the other
device. Server sync and PC sync are the original items in the list.
To add a new transfer contact to the list (for example a mobile phone), select
Menu > Settings > Connectivity > Data transfer > Options > Add contact >
Phone sync or Phone copy, and enter the settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the transfer
contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list, select
Options > Delete.
FCC Draft
Model 3555c - 23 April 2007
Settings
47
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable connection. The
other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and
the transfer contact from the list, other than Server sync or PC sync. According to
the settings, the selected data is copied or synchronized.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite
software for your device on the PC. Use Bluetooth wireless technology or a USB
data cable for the synchronization, and start the synchronization from the PC.
Synchronize from a server
To use a remote internet server, subscribe to a synchronization service. For more
information and the settings required for this service, contact your service
provider. You may receive the settings as a configuration message. See
Configuration settings service p. 8 and Configuration p. 50.
To start the synchronization from your device, select Menu > Settings >
Connectivity > Data transfer > Server sync. Depending on the settings, select
Initializing sync or Initializing copy.
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete.
USB data cable
You can use the USB data cable to transfer data between the device and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the device for data transfer or image printing, connect the data cable.
Confirm USB data cable connected. Select mode. and select from the following
options:
Nokia mode — to use the device to interact with applications on a PC that has
Nokia PC Suite
Printing & Media — to use the device with a PictBridge compatible printer, or to
connect the device to a PC to synchronize it with Windows Media Player (music,
video)
FCC Draft
Model 3555c - 23 April 2007
Settings
48
Data storage — to connect to a PC that does not have Nokia software and use the
device as a data storage
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Nokia mode, Printing & Media, or Data storage.
■Call
Select Menu > Settings > Call and from the following options:
Call forwarding — to forward your incoming calls (network service). You may not
be able to forward your calls if some call restriction functions are active. See Call
restrictions in Security p. 50.
Anykey answer > On — to answer an incoming call by briefly pressing any key,
except the power key, the camera key, the left and right selection keys, or the end
key
Automatic redial > On — to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
Voice clarity > Active — to enhance speech intelligibility especially in noisy
environments
1-touch dialing > On — to dial the names and phone numbers assigned to the
speed-dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate — to have the network notify you of an incoming call
while you have a call in progress (network service). See Call waiting p. 23.
Summary after call > On — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you are
calling (network service). To use the setting agreed upon with your service
provider, select Set by network.
Answer when fold is opened > On — to answer an incoming call by opening the
fold
■Phone
Select Menu > Settings > Phone and from the following options:
Language settings — to set the display language of your device, select Phone
language. Automatic selects the language according to the information on the
SIM card. To set a language for the voice playback, select Voice recognition
FCC Draft
Model 3555c - 23 April 2007
Settings
49
language. See Enhanced voice dialing p. 22 and Voice commands in My shortcuts
p. 43.
Memory status — to view the amount of used and available device memory
Automatic keyguard — to set the keypad of your device to lock automatically
after a preset time delay when the device is in the standby mode and no function
of the device has been used. Select On, and set the time.
Security keyguard — to set the device to ask for the security code when you
unlock the keyguard. Enter the security code, and select On.
Welcome note — to write the note that is shown when the device is switched on
Network mode — to select dual mode (UMTS and GSM), UMTS, or GSM. You
cannot access this option during an active call.
Operator selection > Automatic — to set the device to automatically select one of
the cellular networks available in your area. With Manual you can select a
network that has a roaming agreement with your service provider.
Help text activation — to select whether the device shows help texts
Start-up tone > On — the device plays a tone when switched on
Flight query > On — the device asks whether to use the flight profile every time
when switched on. With flight profile all radio connections are switched off. The
flight profile should be used in areas sensitive to radio emissions.
Confirm SIM service actions — See SIM services p. 67.
■Enhancements
This menu or the following options are shown only if the device is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and
depending on the enhancement, from the following options:
Default profile — to select the profile that you want to be automatically activated
when you connect to the selected enhancement
Automatic answer — to set the device to answer an incoming call automatically
after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer
is off.
Lights — to set the lights permanently On. Select Automatic to set the lights on
for 15 seconds after a key press.
FCC Draft
Model 3555c - 23 April 2007
Settings
50
If your device is provided with a hearing aid coil select Hearing aid > T-coil
hearing aid mode > On to optimize the sound quality when using a t-coil hearing
aid. is shown when the T-coil hearing aid mode is active.
■Configuration
You can configure your device with settings required for certain services to
function correctly. Your service provider may also send you these settings. See
Configuration settings service p. 8.
Select Menu > Settings > Configuration and from the following options:
Default configuration settings — to view the service providers saved in the device.
To set the configuration settings of the service provider as default settings, select
Options > Set as default.
Activate default in all applications — to activate the default configuration
settings for supported applications
Preferred access point — to view the saved access points. Scroll to an access
point, and select Options > Details to view the name of the service provider, data
bearer, and packet data access point or GSM dial-up number.
Connect to service provider support — to download the configuration settings
from your service provider
Device manager settings — to allow or prevent the device from receiving device
software updates. This option may not be available, depending on your device.
Personal configuration settings — to add new personal accounts for various
services manually, and to activate or delete them. To add a new personal account
if you have not added any, select Add new; otherwise, select Options > Add new.
Select the service type, and select and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select Options > Delete or Activate.
■Security
When security features that restrict calls are in use (such as call restriction,
closed user group, and fixed dialing) calls still may be possible to the official
emergency number programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request and UPIN code request — to set the device to ask for your PIN or
UPIN code every time the device is switched on. Some SIM cards do not allow the
code request to be turned off.
FCC Draft
Model 3555c - 23 April 2007
Settings
51
PIN2 code request — to select whether the PIN2 code is required when using a
specific device feature which is protected by the PIN2 code. Some SIM cards do
not allow the code request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from your
device (network service). A restriction password is required.
Fixed dialing — to restrict your outgoing calls to selected phone numbers if this
function is supported by your SIM card. When the fixed dialing is on, GPRS
connections are not possible except while sending text messages over a GPRS
connection. In this case, the recipient’s phone number and the message center
number must be included in the fixed dialing list.
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level > Phone — to set the device to ask for the security code whenever a
new SIM card is inserted into the device. If you select Memory, the device asks for
the security code when the SIM card memory is selected, and you want to change
the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
restriction password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or
user certificates downloaded into your device. See Certificates p. 72.
Security module settings — to view Security module details, select Module PIN
request, or change the module PIN and signing PIN. See also Access codes p. 20.
■Digital rights management
Digital rights management (DRM) is copyright protection, designed to prevent
modification and to limit distribution of protected files. When you download
protected files, such as sound, video, themes, or ringing tones to your device, the
files are free, but locked. You pay for the key to activate the file, and the
activation key is automatically sent to your device when you download the file.
To view the permissions for a protected file, scroll to the file, and select
Options > Activation keys. For example, you can see how many times you can
view a video or how many days you have left for listening to a song.
To extend the permissions for a file, select Options and the corresponding option
for the file type, such as Activate theme. You can send certain types of protected
files to your friends, and they can buy their own activation keys.
FCC Draft
Model 3555c - 23 April 2007
Gallery
52
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
This device supports OMA DRM 1.0 and 2.0.
■Restore factory settings
To reset some of the menu settings to their original values, select Menu >
Settings > Restore settings. Enter the security code. The names and phone
numbers saved in Contacts, are not deleted.
9. Gallery
In this menu you can manage images, video clips, music files,
themes, graphics, tones, recordings, and received files. These files are stored in
the device memory or an attached microSD memory card and may be arranged in
folders.
Your device supports an activation key system to protect acquired content.
Always check the delivery terms of any content and activation key before
acquiring them, as they may be subject to a fee.
Copyright protections may prevent some images, music (including ringing tones),
and other content from being copied, modified, transferred or forwarded.
To see the list of folders, select Menu > Gallery.
To see the available options of a folder, select a folder > Options.
To view the list of files in a folder, select a folder > Open.
To see the available options of a file, select a file > Options.
To view the folders of the memory card when moving a file, scroll to the memory
card, and press the scroll key right.
■Print images
Your device supports Nokia XPressPrint. To connect it to a compatible printer use
a data cable or send the image via Bluetooth to a printer supporting Bluetooth
technology. See Connectivity p. 44.
You can print images that are in the .jpg format. The images taken with the
camera are automatically saved in the .jpg format.
FCC Draft
Model 3555c - 23 April 2007
Gallery
53
Select the image you want to print and Options > Print.
■Memory card
Keep all memory cards out of the reach of small children.
You can use the microSD memory card to store your multimedia files such as
video clips, music tracks, and sound files, images, and messaging data, and to
back up information from device memory.
Some of the folders in Gallery with content that the device use, for example,
Themes, may be stored on a memory card.
To insert and remove the microSD memory card see Insert a microSD card p. 11.
Format the memory card
When a memory card is formatted, all data on the card is permanently lost. Some
memory cards are supplied preformatted and others require formatting. Consult
your retailer to find out if you must format the memory card before you can use
it.
To format a memory card, select Menu >Gallery or Applications, the memory
card folder , Options > Format mem. card > Yes.
When formatting is complete, enter a name for the memory card.
Lock the memory card
To set a password to lock your memory card to help prevent unauthorized use,
select Options > Set password. The password can be up to eight characters long.
The password is stored in your device and you do not have to enter it again while
you are using the memory card on the same device. If you want to use the
memory card on another device, you are asked for the password. To delete the
password, select Options > Delete password.
Check memory consumption
To check the memory consumption of different data groups and the available
memory for installing new applications or software on your memory card, select
Options > Details.
FCC Draft
Model 3555c - 23 April 2007
Media
54
10. Media
When taking and using images or video clips, obey all laws and
respect local customs as well as privacy and legitimate rights of others, including
copyrights.
You can take photos or record live video clips with the built-in VGA camera with
autofocus and zoom.
■Camera
The camera produces pictures in .jpg format, and you can digitally zoom up to
eight times.
Take a photo
To open the camera viewfinder, select Menu > Media > Camera.
To zoom in and out in camera mode, press volume keys up
or down.
To take an image, select Capture, or press camera key. The
device saves the images on the memory card.
Select Options to set Night mode on if the lighting is dim,
Self-timer on to activate the self-timer, Img. sequence on
to take images in a fast sequence. With the highest image
size setting three images are taken in a sequence, with
other size settings eight images are taken.
Select Options > Settings >Image preview time and a
preview time to display the taken images on the display.
During the preview time, select Back to take another image
or Send to send the image as a multimedia message.
Your device supports an image capture resolution of
640 x 480 pixels.
Camera and video options
To use a filter, select Options > Effects > Normal, Grayscale, Sepia, Negative.
To change the camera and video settings, select Options > Settings.
FCC Draft
Model 3555c - 23 April 2007
Media
55
■Video
You can record video clips in .3gp format. Available recording time depends on
the video clip length and quality settings.
The length and file size of the clips may vary depending on the selected quality
and available memory. To set the quality of your video clips, select Menu >
Media > Video > Options > Settings >Video clip quality > High, Normal or Basic.
To select the file size limit, select Menu > Media > Video > Options > Settings >
Video clip length. Default means that the file size is limited so that it fits into a
multimedia message (multimedia message size can vary among devices).
Maximum means that all available memory is used. Available memory depends
on where the video clip is stored.
Record a video clip
Select Menu > Media > Video > Record. You can also press and hold the camera
key. To pause the recording, select Pause; to resume the recording, select
Continue. To stop the recording, select Stop. The device saves the recording in
Gallery > Video clips.
To zoom in or out, press the volume key up or down, or scroll left and right.
■Music player
Your device includes a music player for listening to music tracks, recordings or,
other sound files that you have transferred to the device with the Nokia Audio
Manager application, which is part of Nokia PC Suite. See Nokia PC Suite p. 73.
Music files stored in a folder in the device memory or in a folder of the memory
card, will automatically be detected and added to the default track list.
To open the music player, select Menu > Media > Music player.
Playing the music tracks
Warning! Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Operate the music player with the keys on the device or with the virtual keys on
the display.
When you open the Music player menu, the details of the first track on the
default track list are shown. To play, select .
To adjust the volume level, use the volume keys on the side of the device.
FCC Draft
Model 3555c - 23 April 2007
Media
56
To pause the playing, select .
To stop the playing, press and hold the end key
To skip to the next track, select . To skip to the beginning of the previous
track, select .
To rewind the current track, select and hold . To fast forward the current
track, select and hold . Release the key at the position you want.
Settings for the music player
In the Music player menu, the following options may be available:
All songs — View all the tracks available on the track list and play the desired
track. To play a track, scroll to the desired track, and select Play.
If you select Options, you can refresh the track list (for example, after adding
new tracks to the list) and change the track list that is shown when you open the
music player menu if several track lists are available in the device. You also my
send a track to another device.
Music library — View the database of the available music tracks. You can choose
the music to listen to, and create and manage the content of the library.
Play options — Select Random to play the tracks on the track list in random order.
Select Repeat to play the current track or the entire track list repeatedly.
Media equalizer — Select or define an equalizer setting. See Equalizer p. 57.
Play via Bluetooth — Connect to a Bluetooth audio accessory.
Use tone — Set the currently played music track, for example, as ringing tone.
Web page — to access a page associated with the currently played track. Dimmed
if no Web page is available.
Music downloads— to connect to a browser service related to the current track.
This function is only available when the address of the service is included in the
track.
■Voice recorder
You can record pieces of speech, sound, or an active call, and save them in
Gallery. This is useful when recording a name and phone number to write down
later.
The recorder cannot be used when a data call or GPRS connection is active.
FCC Draft
Model 3555c - 23 April 2007
Organizer
57
Record sound
1. Select Menu > Media > Recorder.
To use the graphical keys , , or on the display, scroll left or right to
the desired key, and select it.
2. To start the recording, select . To start the recording during a call, select
Options > Record. While recording a call, all parties to the call hear a faint
beeping sound. When recording a call, hold the device in the normal position
near to your ear. To pause the recording, select .
3. To end the recording, select . The recording is saved in Gallery >
Recordings.
To listen to the latest recording, select Options > Play last recorded.
To send the last recording, select Options > Send last recorded.
To see the list of recordings in Gallery, select Options > Recordings list >
Recordings.
■Equalizer
To control the sound quality when using the music player by amplify or diminish
frequency bands.
Select Menu > Media > Equalizer.
To activate a set, scroll to one of the equalizer sets, and select Activate.
To view, edit, or rename a selected set, select Options > View, Edit, or Rename.
Not all sets can be edited or renamed.
11. Or gani zer
■Alarm clock
You can set the device to alarm at a desired time. Select Menu > Organizer >
Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To change the
alarm time when the alarm time is set, select On.
To set the device to alert you on selected days of the week, select Repeat alarm.
FCC Draft
Model 3555c - 23 April 2007
Organizer
58
To select the alarm tone or set the radio as the alarm tone, select Alarm tone:. If
you select the radio as an alarm tone, connect the headset to the device.
To set a snooze time-out, select Snooze time-out and the time.
Stop the alarm
The device sounds an alert tone even if the device was switched off. To stop the
alarm, select Stop. If you let the device continue to sound the alarm for a minute
or select Snooze, the alarm stops for the time you set in Snooze time-out, then
resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the device for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless device
use may cause interference or danger.
■Calendar
Select Menu > Organizer > Calendar.
The current day is indicated by a frame. If there are any notes set for the day, the
day is in bold type, and the beginning of the note is shown below the calendar. To
view the day notes, select View. To view a week, select Options > Week view. To
delete all notes in the calendar, select the month or week view, and select
Options > Delete all notes.
To set the date, time, time zone, date or time format, date separator, default
view, or the first day of the week, select Settings.
To set the device to delete old notes automatically after a specified time, select
Auto-delete notes.
Make a calendar note
Select Menu > Organizer > Calendar. Scroll to the date, and select Options >
Make a note and one of the following note types: Meeting, Call,
Birthday, Memo, or Reminder. Fill in the fields.
Note alarm
The device displays the note and if set, sounds a tone. With a call note on the
display, to call the displayed number, press the call key. To stop the alarm and to
view the note, select View. To stop the alarm for 10 minutes, select Snooze.
FCC Draft
Model 3555c - 23 April 2007
Organizer
59
To stop the alarm without viewing the note, select Exit.
■To-do list
To save a note for a task that you must do, select Menu > Organizer > To-do list.
To make a note if no note is added, select Add note. Fill in the fields, and select
Save.
To view a note, scroll to it, and select View. While viewing a note, you can also
select an option to edit the attributes. You can also select an option to delete the
selected note and delete all the notes that you have marked as done.
■Notes
To write and send notes, select Menu > Organizer > Notes.
To make a note if no note is added, select Add note. Write the note, and select
Save.
■Calculator
The calculator in your device provides basic arithmetic and trigonometric
functions, calculates the square and the square root, the inverse of a number, and
converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Select Menu > Organizer > Calculator. When 0 is displayed on the screen, enter
the first number in the calculation. Press # for a decimal point. Scroll to the
desired operation or function or select it from the Options. Enter the second
number. Repeat this sequence as many times as it is necessary. To start a new
calculation, first select and hold Clear.
To perform a currency conversion, select Menu > Organizer > Calculator. To save
the exchange rate, select Options > Exchange rate. Select either of the displayed
options. Enter the exchange rate, press # for a decimal point, and select OK. The
exchange rate remains in the memory until you replace it with another one. To
perform the currency conversion, enter the amount to be converted, and select
Options > To home or To foreign.
Note: When you change base currency, you must enter new exchange
rates because all previously set exchange rates are cleared.
FCC Draft
Model 3555c - 23 April 2007
Push to talk
60
■Countdown timer
To start the countdown timer, select Menu > Organizer > Timer > Normal timer,
enter the alarm time, and write a note text that is displayed when the time
expires. To start the countdown timer, select Start. To change the countdown
time, select Change time. To stop the timer, select Stop timer.
To have an interval timer with up to 10 intervals started, first enter the intervals.
Select Menu > Organizer > Timer > Interval timer. To start the timer, select Start
timer > Start.
■Stopwatch
You can measure time, take intermediate times, or take lap times using the
stopwatch. During timing, the other functions of the device can be used. To set
the stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organizer > Stopwatch and from the following options:
Split timing — to take intermediate times. To start the time observation, select
Start. Select Split every time that you want to take an intermediate time. To stop
the time observation, select Stop.
To save the measured time, select Save.
To start the time observation again, select Options > Start. The new time is
added to the previous time. To reset the time without saving it, select Reset.
Lap timing — to take lap times
Continue — to view the timing that you have set in the background
Show last time — to view the most recently measured time if the stopwatch is not
reset
View times or Delete times — to view or delete the saved times
12. Push to talk
Select Menu > Push to talk.
Push to talk (PTT) over cellular is a two-way radio service available over a GPRS
cellular network (network service).
FCC Draft
Model 3555c - 23 April 2007
Push to talk
61
You can use PTT to have a conversation with one person or with a group of people
(channel) having compatible devices. While you are connected to the PTT service,
you can use the other functions of the device.
To check availability and costs, and to subscribe to the service, contact your
network operator. Roaming services may be more limited than for normal calls.
Before you can use the PTT service, you must define the required PTT service
settings. See PTT settings p. 65 and Configuration settings p. 66.
■PTT channels
A PTT channel comprises a group of people (for example, friends or a workteam)
who joined the channel after they where invited to. When you call a channel, all
members joined to the channel hear the call simultaneously.
There are different types of PTT channels:
Public channel — Every channel member can invite other persons.
Private channel — Only persons which receive an invitation by the channel
creator can join in.
Provisioned channel — A permanent channel is created by the service provider.
You can set the status of each channel to Active or Inactive.
The number of active channels and the number of members per channel is
limited. Contact your service provider for details.
Create a channel
To add a channel, select Menu > Push to talk > Add channel and enter the
settings in the form fields:
Channel name: — Enter a name for the new channel.
Channel status: — Select Active to set the channel active, or Inactive to disable
the channel.
Chnl. nickname: — Enter your nick name to be shown the new channel.
Chnl. security: > Public channel or Private channel
Image: — Select Change and an image from the Gallery or the Default graphic to
set a graphic for the new channel.
To send an invitation to the channel, select Yes when the device requests it. The
recipient of the invitation is added to the member list of the channel when the
invitation is accepted. To send further invitations select Menu > Push to talk >
FCC Draft
Model 3555c - 23 April 2007
Push to talk
62
Channel list, a channel, and Options > Send invitation. To send the invitation, use
a text message.
To add a provisioned channel, select Menu > Push to talk > Add channel >
Options > Edit add. manually. Enter the Channel addr.: provided by your service
provider.
Receive an invitation
1. When you receive a text message invitation to a channel, Channel invitation
received: %U is displayed.
2. To view the nickname of the person who sent the invitation and the channel
address if the channel is not a private channel, select View.
3. To add the channel to your device, select Save.
4. To set the status for the channel, select Active or Inactive.
To reject the invitation, select Exit > Yes, or select View > Discard > Yes.
■Switch PTT on and off
To connect to the PTT service, select Menu > Push to talk > Switch PTT on, or
press and hold the PTT key. indicates the PTT connection. indicates that
the service is temporarily unavailable. If you have added channels to the device,
you are automatically joined to the active channels.
You may assign a default function to the PTT key to open the channel list, the
contacts list or a single channel or contact. See PTT settings p. 65.
To disconnect from the PTT service, select Switch PTT off.
■Make and receive a PTT call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
To make a channel call, a one-to-one call, or a call to multiple recipients, you
must hold the PTT key as long as you talk. To listen to the response, release the
PTT key.
You may be able to check the login status of your contacts in Menu > Push to
talk > Contacts list. This service depends on your network operator and is only
available for subscribed contacts. To subscribe a contact, select
FCC Draft
Model 3555c - 23 April 2007
Push to talk
63
Options >Subscribe contact, or if one or more contacts are already marked
Subscribe marked.
or indicate that the person is either available or unknown.
indicates that the person wants not to be disturbed, but can receive callback
requests. indicates that the person does not have PTT switched on.
Make a channel call
To call a channel, select Channel list, the desired channel, and press and hold the
PTT key.
Make a one-to-one call
To start a one-to-one call from the list of contacts, select Contacts > Names or
Menu > Push to talk > Contacts list. Scroll to a contact, and press and hold the
PTT key.
To start a one-to-one call from the list of PTT channels, select Channel list, the
desired channel, and Members. Scroll to the desired contact, and press and hold
the PTT key.
To start a one-to-one call from the list of callback requests you have received,
select Callback inbox. Scroll to the desired nickname, and press and hold the PTT
key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list. The recipients receive
an incoming call and need to accept the call in order to participate. If supported
by your network operator, you also may select contacts with a phone number but
without PTT number. For details, contact your network operator.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT key to start the call. The participating contacts are
shown on the display, as soon as they join the call.
3. Press and hold the PTT key to talk to them. Release the PTT key to hear the
response.
4. Press the end key to terminate the call.
FCC Draft
Model 3555c - 23 April 2007
Push to talk
64
Receive a PTT call
A short tone notifies you of an incoming PTT call. Information, such as the
channel, the phone number, or the nickname (network service) of the caller are
displayed.
You can either accept or reject an incoming one-to-one call if you have set the
device to first notify you of the one-to-one calls.
When you press and hold the PTT key while the caller is talking, you hear a
queuing tone, and Queuing is displayed. Press and hold the PTT key, and wait for
the other person to finish; then you can talk immediately.
■Callback requests
If you make a one-to-one call and do not get a response, you can send a request
for the person to call you back.
Send a callback request
You can send a callback request in the following ways:
To send a callback request from the contacts list in the Push to talk menu, select
Contacts list. Scroll to a contact, and select Options > Send PTT callback.
To send a callback request from Contacts, search for the desired contact, and
select Details. Scroll to the PTT address, and select Options > Send PTT callback.
To send a callback request from the channel list in the PTT menu, select Channel
list, and scroll to the desired channel. Select Members, scroll to the desired
contact, and select Options > Send PTT callback.
To send a callback request from the callback request list in the Push to talk menu,
select Callback inbox. Scroll to a contact, and select Options > Send PTT callback.
Respond to a callback request
When someone sends you a callback request, Callback request received is
displayed in the standby mode.
To open the Callback inbox, select View. The list of nicknames of the persons who
have sent you callback requests is shown.
To make a one-to-one call, select the desired request and press and hold the PTT
key.
To send a call request back to the sender, select Options > Send PTT callback.
FCC Draft
Model 3555c - 23 April 2007
Push to talk
65
To delete the request, select Delete.
To save a new contact or to add the PTT address to a contact from a received
callback request, select Options > Save as or Add to contact.
■Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one calls in
the following ways:
To add a PTT address to a name in Contacts, search for the desired contact, select
Details > Options > Add detail > PTT address. A contact will only appear in the
PTT contact list, if the PTT address is entered.
To add a contact to the PTT contacts list, select Menu > Push to talk > Contacts
list > Options > Add contact.
To add a contact from the channel list, connect to the PTT service, select Channel
list, and scroll to the desired channel. Select Members, scroll to the member
whose contact information you want to save, and select Options. To add a new
contact, select Save as. To add a PTT address to a name in Contacts, select Add to
contact.
■PTT settings
Select Menu >Push to talk > PTT settings.
1 to 1 calls > On — to set the device to receive incoming calls. To make but not
receive one-to-one calls, select Off. The service provider may offer some services
that override these settings. To set the device to notify you first of incoming
one-to-one calls with a ringing tone, select Notify.
PTT key default function — to set the function to be performed when you press
and hold the PTT key.
Show my login status — to send my login status to others.
PTT status in startup > Yes or Ask first— to automatically connect to the PTT
service
Push to talk when roaming — to specify whether to allow PTT service outside your
home network.
Send my PTT address > No — to send or hide your address from others
FCC Draft
Model 3555c - 23 April 2007
Applications
66
■Configuration settings
You may receive the settings for connecting to the service from your service
provider. See Configuration settings service p. 8. You can enter the settings
manually. See Configuration p. 50.
To select the settings for connecting to the service, select Menu > Push to talk >
Configuration settings. Select from the following options:
Configuration — to select a service provider.
Account — to select a PTT service account in the active configuration settings
Other parameters are PTT user name, Default nickname, PTT password, Domain,
and Server address.
To access the internet site of your PTT provider, select Menu > Push to talk >
Web.
13. Applications
In this menu you can manage applications and games. These files are
stored in the device memory or an attached microSD memory card and may be
arranged in folders.
For options to format or lock and unlock the memory card see Memory card p. 53.
To launch a game, select Menu > Applications > Games, the desired game, and
Open.
To launch an application, select Menu > Applications > Collection, an
application, and Open.
The following application options are available:
Update version — to check whether a new version of the application is available
for download from Web (network service)
Web page — to provide further information for the application from an Internet
page (network service), if available
App. access — to restrict the application from accessing the network
Your device supports J2ME Java applications. Make sure that the application is
compatible with your device before downloading it. You can download new Java
applications and games in different ways.
FCC Draft
Model 3555c - 23 April 2007
SIM services
67
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
To download an application, use the Nokia Application Installer from PC Suite, or
select Menu > Applications > Options > Downloads > App. downloads; the list
of available bookmarks is shown. See Bookmarks p. 69.
For the availability of different services and pricing contact your service provider.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.
14. SIM services
Your SIM card may provide additional services. You can access
this menu only if it is supported by your SIM card. The name and contents of the
menu depend on the available services.
For availability and information on using SIM card services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
To set the device to show you the confirmation messages sent between your
device and the network when you are using the SIM services, select Menu >
Settings > Phone > Confirm SIM service actions > Yes.
Accessing these services may involve sending messages or making a phone call
for which you may be charged.
15. Web
You can access various mobile internet services with your device
browser.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Check the availability of these services, pricing, and instructions with your
service provider.
FCC Draft
Model 3555c - 23 April 2007
Web
68
With the browser you can view the services that use wireless markup language
(WML) or extensible hypertext markup language (XHTML) on their pages.
Appearance may vary due to screen size. You may not be able to view all details
of the internet pages.
■Set up browsing
You may receive the configuration settings required for browsing as a
configuration message from your service provider. See Configuration settings
service p. 8. You can also enter all the configuration settings manually. See
Configuration p. 50.
■Connect to a service
Ensure that the correct configuration settings of the service are activated.
1. To select the settings for connecting to the service, select Menu > Web >
Settings > Configuration settings.
2. Select Configuration. Only the configurations that support browsing service
are shown. Select a service provider, Default, or Personal config. for browsing.
See Set up browsing p. 68.
3. Select Account and a browsing service account contained in the active
configuration settings.
4. Select Display terminal window > Yes to perform manual user authentication
for intranet connections.
Make a connection to the service in one of the following ways:
• Select Menu > Web > Home; or in the standby mode, press and hold 0.
• To select a bookmark of the service, select Menu > Web > Bookmarks.
• To select the last URL, select Menu > Web > Last web address.
• To enter the address of the service, select Menu > Web > Go to address. Enter
the address of the service, and select OK.
■Browse pages
After you make a connection to the service, you can start browsing its pages. The
function of the keys may vary in different services. Follow the text guides on the
device display. For more information, contact your service provider.
FCC Draft
Model 3555c - 23 April 2007
Web
69
To browse through the page, scroll in any direction.
To select an item, press the call key, or select Select.
To enter letters and numbers, press the 0 to 9 keys. To enter special characters,
press *.
While browsing, you can make a phone call, and save a name and a phone
number from a page.
■Bookmarks
You can save page addresses as bookmarks in the device memory.
1. While browsing, select Options > Bookmarks; or in the standby mode, select
Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it, or press the call key to make a connection
to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; to create a new
bookmark; or to save the bookmark to a folder.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
internet site.
When you receive a bookmark that is sent as a bookmark, 1 bookmark received is
displayed. To view the bookmark, select Show.
■Appearance settings
While browsing, select Options > Other options > Appear. settings; or in the
standby mode, select Menu > Web > Settings > Appearance settings and from
the following options:
Text wrapping — to select how the text shall appear on the display
Font size — to set the font size
Show images > No — to hide images on the page
Alerts > Alert for unsecure connection > Yes — to set the device to alert when a
secure connection changes to an unsecure one during browsing
Alerts > Alert for unsecure items > Yes — to set the device to alert when a secure
page contains an unsecure item. These alerts do not guarantee a secure
connection. For more information, see Browser security p. 71.
FCC Draft
Model 3555c - 23 April 2007
Web
70
Character encoding > Content encoding — to select the encoding for the browser
page content
Character encoding > Unicode (UTF-8) web addresses > On — to set the device to
send a URL as a UTF-8 encoding
Screen size > Full or Small— to set the screen layout
Show page title > Yes or No— to display the title of the web page
JavaScript > Enable — to enable the Java scripts
■Security settings
Cookies
A cookie is data that a site saves in the cache memory of your device. Cookies are
saved until you clear the cache memory. See Cache memory p. 71.
While browsing, select Options > Other options > Security > Cookie settings; or
in the standby mode, select Menu > Web > Settings > Security settings >
Cookies. To allow or prevent the device from receiving cookies, select Allow or
Reject.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure page. The
device supports WML scripts.
While browsing, to allow the scripts, select Options > Other options > Security >
WMLScript sett.; or in the standby mode, select Menu > Web > Settings >
Security settings > WMLScripts over secure connection > Allow.
■Download settings
To automatically save all downloaded files in Gallery, select Menu > Web >
Settings > Downloading settings > Automatic saving > On.
■Service inbox
The device is able to receive service messages sent by your service provider
(network service). Service messages are notifications (for example, news
headlines), and they may contain a text message or an address of a service.
FCC Draft
Model 3555c - 23 April 2007
Web
71
To access the Service inbox in the standby mode, when you have received a
service message, select Show. If you select Exit, the message is moved to the
Service inbox. To access the Service inbox later, select Menu > Web > Service
inbox.
To access the Service inbox while browsing, select Options > Other options >
Service inbox. Scroll to the message you want, and to activate the browser and
download the marked content, select Retrieve. To display detailed information on
the service notification or to delete the message, select Options > Details or
Delete.
Service inbox settings
Select Menu > Web > Settings > Service inbox settings.
To set whether you want to receive service messages, select Service messages >
On or Off.
To set the device to receive service messages only from content authors approved
by the service provider, select Message filter > On. To view the list of the
approved content authors, select Trusted channels.
To set the device to automatically activate the browser from the standby mode
when the device receives a service message, select Automatic connection > On. If
you select Off, the device activates the browser only after you select Retrieve
when the device has received a service message.
■Cache memory
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache.
To empty the cache while browsing, select Options > Other options > Clear the
cache; in the standby mode, select Menu > Web > Clear the cache.
■Browser security
Security features may be required for some services, such as online banking or
shopping. For such connections you need security certificates and possibly a
security module, which may be available on your SIM card. For more information,
contact your service provider.
FCC Draft
Model 3555c - 23 April 2007
Web
72
Security module
The security module improves security services for applications requiring a
browser connection, and allows you to use a digital signature. The security
module may contain certificates as well as private and public keys. The
certificates are saved in the security module by the service provider.
To view or change the security module settings, select Menu > Settings >
Security > Security module settings.
Certificates
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller,
they must be used correctly in order to benefit from increased security.
The existence of a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown even if the certificate
should be valid, check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
There are three kinds of certificates: server certificates, authority certificates, and
user certificates. You may receive these certificates from your service provider.
Authority certificates and user certificates may also be saved in the security
module by the service provider.
To view the list of the authority or user certificates downloaded into your device,
select Menu > Settings > Security > Authority certificates or User certificates.
is displayed during a connection, if the data transmission between the
device and the content server is encrypted.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Digital signature
You can make digital signatures with your device if your SIM card has a security
module. Using the digital signature can be the same as signing your name to a
paper bill, contract, or other document.
FCC Draft
Model 3555c - 23 April 2007
PC connectivity
73
To make a digital signature, select a link on a page, for example, the title of the
book you want to buy and its price. The text to sign, which may include the
amount and date, is shown.
Check that the header text is Read and that the digital signature icon is
shown.
If the digital signature icon does not appear, there is a security breach, and you
should not enter any personal data such as your signing PIN.
To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll through
and read all of the text before signing.
Select the user certificate you want to use. Enter the signing PIN. The digital
signature icon disappears, and the service may display a confirmation of your
purchase.
16. PC connectivity
You can send and receive e-mail, and access the Internet when your device is
connected to a compatible PC through a Bluetooth or a data cable connection.
You can use your device with a variety of PC connectivity and data
communications applications.
■Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do
notes between your device and the compatible PC or a remote internet server
(network service). You may find more information and PC Suite on the Nokia
website at www.nokia.com/support or your local Nokia website.
■Packet data, HSCSD, and CSD
With your device you can use the packet data, high-speed circuit switched data
(HSCSD), and circuit switched data (CSD, GSM data) data services. For availability
and subscription to data services, contact your network operator or service
provider. See Modem settings p. 46.
The use of HSCSD services consumes the device battery faster than normal voice
or data calls.
FCC Draft
Model 3555c - 23 April 2007
Battery information
74
■Bluetooth
Use the Bluetooth technology to connect your compatible PC to the internet.
Your device must have activated a service provider that supports internet access
and your PC has to support Bluetooth PAN (personal area network). After
connecting to the network access point (NAP) service of the device and pairing
with your PC your device automatically opens a packet data connection to the
internet. PC Suite software installation is not necessary when using the NAP
service of the device.
See Bluetooth wireless technology p. 44.
■Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
For better performance during data calls, place the device on a stationary surface
with the keypad facing downward. Do not move the device by holding it in your
hand during a data call.
17. Battery information
■Charging and discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger and
then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave fully charged battery connected to a charger, since overcharging may
FCC Draft
Model 3555c - 23 April 2007
Battery information
75
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
■Nokia battery authentication
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging, and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery is
not an authentic original Nokia battery, you should refrain from using it, and take
it to the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
FCC Draft
Model 3555c - 23 April 2007
Battery information
76
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2. When you angle the hologram left, right, down, and
up, you should see 1, 2, 3, and 4 dots on each side
respectively.
3. Scratch the side of the label to reveal a 20-digit
code, for example, 12345678919876543210. Turn
the battery so that the numbers are facing upwards.
The 20-digit code reads starting from the number at
the top row followed by the bottom row.
4. Confirm that the 20-digit code is valid by following
the instructions at www.nokia.com/batterycheck.
To create a text message enter the 20-digit code, for
example, 12345678919876543210, and send to +44
7786 200276.
To create a text message,
• For countries in Asia Pacific, excluding India: Enter the 20-digit code, for
example, 12345678919876543210, and send to +61 427151515.
• For India only: Enter Battery followed by the 20-digit battery code, for
example, Battery 12345678919876543210, and send to 5555.
National and international operator charges will apply.
You should receive a message indicating whether the code can be authenticated.
What if your battery is not authentic?
FCC Draft
Model 3555c - 23 April 2007
Battery information
77
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
FCC Draft
Model 3555c - 23 April 2007
Care and maintenance
78
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Do not touch the main display with hard or angular materials. Objects like
earrings or jewelry may scratch the display.
• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
FCC Draft
Model 3555c - 23 April 2007
Additional safety information
79
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (5/8 inch) away from
the body. When a carry case, belt clip or holder is used for body-worn operation,
it should not contain metal and should position the device the above-stated
distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless devices, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless device and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers
should do the following:
FCC Draft
Model 3555c - 23 April 2007
Additional safety information
80
• Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your device, and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless devices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
FCC Draft
Model 3555c - 23 April 2007
Additional safety information
81
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities and areas where the air contains chemicals or
particles such as grain, dust, or metal powders. You should check with the
manufacturers of vehicles using liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely used in their vicinity.
■Emergency calls
Important: Wireless devices, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in the offline or flight mode, you
must change the profile to activate the device function before you can make an
emergency call. Consult this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
FCC Draft
Model 3555c - 23 April 2007
Additional safety information
82
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is x.xx W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
product certification for use at the ear is 1.20 W/kg and when properly worn on
the body is 0.72 W/kg. Information about this device model can be found at http:/
/www.fcc.gov/oet/fccid by searching the equipment authorization system using
FCC ID: QMNRM-277.
■Technical information
Dimensions: Width 1.74 inches (44.3 mm), Length 3.92 inches (99.6 mm), Depth
0.81 inch (20.5 mm)
Weight: < 3.70 ounces (98 g) with BL-5C Li-Ion Battery
Wireless networks: 850/1900 MHz WCDMA; 850/900/1800/1900 MHz GSM
Frequency range (Tx): 850: 824–849 MHz; 900: 880.0–915.0 MHz;
1800: 1710.0–1785.0 MHz; 1900: 1850.0–1910.0 MHz
Frequency range (Rx): 850: 869.0–894.0 MHz; 900: 925.0–960.0 MHz;
1800: 1805.0–1880.0MHz; 1900: 1930.0–1990.0 MHz
Bluetooth: 2402.0 - 2480.0 MHz
FCC Draft
Model 3555c - 23 April 2007
Additional safety information
83
■Battery information
This section provides information about battery charging times with the standard
charger (AC-3), talk-times, and standby times. Be aware that the information in
this section is subject to change. For more information, contact your service
provider.
Charging times
The following charging times are approximate:
Standard charger (AC-3): up to 2 hours 15 minutes
Talk and standby times
Operation times are estimates only and depend on signal strength, device use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: up to 3 hours
Standby time: up to 13 days in UMTS mode.
FCC Draft
Model 3555c - 23 April 2007
84
Index
A
access codes 20
accessories. See enhancements.
activation keys 51
active standby 18, 42
alarm clock 57
antenna 14
applications
audio messages 28
B
barring password 21
battery
authentication 75
charging 12
charging times 83
charging, discharging 74
information 83
installation 9
talk and standby times 83
blacklist 31
Bluetooth 44, 74
bookmarks 69
browser 68, 69, 70
business cards 40
C
cache memory 71
calculator 59
calendar 58
call
functions 21
log 41
options 23
settings 48
waiting 23
call register. See call log.
calls 21, 22
camera
effects 54
filter 54
settings 54
take an image 54
certificates 72
character case 23
charge the battery 12
charger
times 83
clock settings 43
codes 20, 21
configuration 50
setting service 8
settings 14
contact information 9
contacts 38, 39, 40, 41
cookies 70
copyright protection 51
countdown timer 60
customer service 9
D
data
communication 74
transfer 46
data cable 47
date settings 43
digital rights management 51
digital signature 72
display 17, 18
downloading files 51
downloads 8, 70
E
EGPRS 45
e-mail application 29
emergency calls 81
end
call 21
enhancements 7, 49
equalizer 57
explosive environments 80
F
factory settings 52
flash messages 27
font size 42
G
gallery 52
games 66
GPRS 45
FCC Draft
Model 3555c - 23 April 2007
85
H
handsfree. See loudspeaker.
hearing aid 50, 80
I
image 54
IMAP4 29
indicators 18
installation
battery 9
SIM card 9
instant messaging 31
internet 67
J
junk folder 31
K
keyguard 20
keypad lock 20
keys 20
L
language settings 48
lights 49
log 41
loudspeaker 23
M
main display 18, 42
maintenance 78
memory card 53
menu 17
message center number 25
message settings 35, 36, 37
messages
audio message 28
flash message 27
length indicator 25
message settings 35
text 25
voice message 34
mini display 17, 43
MMS. See multimedia messages.
multimedia messages 26
music player 55
N
navigation 17
network
name on display 17, 18
services 6
network mode 17, 18
Nokia contact information 9
notes 58, 59
numbers 41
O
offline mode 20
organizer 57
overview functions 8
P
pacemakers 79
packet data 45, 73
parts 16
PC connectivity 73
PC Suite 73
phone
configuration 50
keys 16
open 13
parts 16
settings 48
phone lock. See keypad lock.
PictBridge 47
PIN codes 13, 21
plug and play service 14
POP3 29
predictive text input 24
profiles 41
protected files 51
PTT 60
PUK codes 21
Push to talk. See PTT.
pushed messages 70
R
recorder 56
ringing tones 42
S
safety information 5, 79
SAR 81
scrolling 17
security
FCC Draft
Model 3555c - 23 April 2007
86
codes 20
module 72
settings 50
service
inbox 70
messages 70
numbers 41
services 67
settings
active standby 42
call 48
camera 54
clock 43
configuration 50
connectivity 44
data transfer 46
date 43
downloads 70
enhancements 49
fold animation 42
GPRS, EGPRS 45
main display 42
messages 35
mini display 43
my shortcuts 43
phone 48
profiles 41
PTT 65
PTT configuration 66
restore factory settings 52
security 50
service inbox 71
themes 42
time 43
tones 42
USB data cable 47
wallpaper 42
shared memory 7
shortcuts 43
signal strength 17, 18
SIM
card 20
card installation 9
services 67
SMS. See text messages
spam filter 31
speed dialing 22, 40
standby
time 83
standby mode 17, 43
status indicators 17, 18
stopwatch 60
strap 15
switch on and off 13
swivel 42
synchronisation 46
T
take an image 54
talk time 83
technical information 82
text 23, 24, 25
text message 25
themes 42
time settings 43
to-do list 59
tones 42
traditional text input 25
U
unlock keypad 20
UPIN 13
V
vehicles 80
voice
commands 43
dialing 22
messages 34
recorder 56
W
wallpaper 42
Web 67, 68
wireless markup language 68
wrist strap 15
write text 23
X
XHTML 68
FCC Draft
Model 3555c - 23 April 2007