Microsoft RM-308 GSM/WCDMA cellular phone w/BT User Manual RM 243 sg en FCCdraft 300307
Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT RM 243 sg en FCCdraft 300307
Manual
DRAFT
RM-308
User Guide
DRAFT
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-308 product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of
Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia Care, Navi, and Visual Radio are trademarks or registered
trademarks of Nokia Corporation. Nokia tune and Visual Radio are sound marks of Nokia Corporation.
Other product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form
without the prior written permission of Nokia is prohibited.
This product includes software licensed from Symbian Software Ltd © 1998-2007.
Symbian and Symbian OS are trademarks of Symbian Ltd.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2007. Tegic
Communications, Inc. All rights reserved.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems,
Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance with the
MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use
in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be
implied for any other use. Additional information, including that related to promotional, internal, and
commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA
OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW,
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications for these products may vary by region. Please
check with your Nokia dealer for details, and availability of language options.
DRAFT
This device complies with Directive 2002/95/EC on the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
NO WARRANTY
The third-party applications provided with your device may have been created and may be owned by
persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these
materials. Nokia does not provide any warranty for the third-party applications.BY USING THE
APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU
FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT
INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such
interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly
approved by Nokia could void the user's authority to operate this equipment.
4
DRAFT
Contents
General information ........................ 9
Access codes ...................................................... 9
Lock code......................................................... 9
PIN codes......................................................... 9
PUK codes........................................................ 9
Barring password........................................... 9
Nokia support and contact information . 10
1. Get started.................................. 10
Insert a (U)SIM card and battery .............. 10
MicroSD card slot .......................................... 11
Charge the battery ........................................ 12
Switch the phone on and off ..................... 12
Normal operating position.......................... 13
Transfer data................................................... 13
2. Your phone ................................. 13
Keys and parts ................................................ 13
Standby mode................................................. 14
Active standby............................................. 14
Offline profile.............................................. 14
Indicators ......................................................... 15
Menu ................................................................. 16
View memory consumption..................... 16
Help ................................................................... 16
Volume control............................................... 17
Keypad lock (keyguard)................................ 17
My own............................................................. 17
Connect a compatible headset .................. 17
Connect a USB data cable .......................... 18
Attach a wrist strap ...................................... 18
3. Call functions ............................. 18
Make a voice call........................................... 18
Call mailbox................................................. 19
Speed dialing............................................... 19
Voice dialing ................................................ 19
Make a conference call (network service)
20
Answer or reject a call ................................. 20
Options during a call................................. 20
Call waiting (network service)................ 21
Make a video call ........................................... 21
Answer a video call .................................... 21
Video sharing ............................................... 22
......................................................................... 22
Log...................................................................... 23
4. Write text................................... 23
Traditional text input.................................... 23
Predictive text input...................................... 24
Copy text .......................................................... 24
5. Messaging .................................. 24
Write and send messages ............................ 25
My folders ........................................................ 26
Mailbox ............................................................. 26
View messages on the SIM card ................ 27
Messaging settings........................................ 27
Text message settings ............................... 27
Multimedia messaging settings.............. 28
E-mail settings ............................................ 29
Message reader............................................... 29
6. Contacts ..................................... 29
7. Personalisation........................... 30
Themes .............................................................. 30
Profiles .............................................................. 30
8. Media applications .................... 32
Gallery ............................................................... 32
Edit images................................................... 32
Edit video clips ............................................ 33
Camera .............................................................. 34
Music player .................................................... 34
Music library ................................................ 34
Track lists ...................................................... 35
Listen to music ............................................ 35
Visual Radio ..................................................... 35
9. Web............................................. 36
Web.................................................................... 36
Set up the phone for the browser service .
36
5
DRAFT
Make a connection .................................... 36
View bookmarks.......................................... 37
Connection security................................... 37
Keys and commands for browsing web
pages.............................................................. 37
End a connection........................................ 38
Empty the cache......................................... 38
Browser settings......................................... 39
10.Time management .................... 40
Clock.................................................................. 40
Alarm clock .................................................. 40
Calendar ........................................................... 41
11.Office applications ................... 41
Adobe Reader.................................................. 41
Settings ......................................................... 41
Quickoffice ...................................................... 42
Quickword .................................................... 42
Quicksheet.................................................... 42
Quickpoint.................................................... 43
Quickmanager ............................................. 43
More information....................................... 43
12.Locationing ............................... 44
Maps.................................................................. 44
Browse maps ............................................... 44
GPS data........................................................... 45
Landmarks........................................................ 45
Download!........................................................ 45
13.Settings ..................................... 46
Voice commands ............................................ 46
Phone settings ................................................ 46
General .......................................................... 46
Phone ............................................................. 50
Connection ................................................... 52
Applications.................................................. 53
14.Data management.................... 53
Data manager.................................................. 53
Application manager ................................. 53
Memory card................................................ 54
File manager................................................. 55
Device manager........................................... 55
Activation keys ............................................ 55
15.Connectivity.............................. 57
PC Suite............................................................. 57
Bluetooth connection ................................... 57
Bluetooth connection settings ............... 57
Send data...................................................... 58
Paired devices view.................................... 58
Receive data................................................. 59
USB data cable................................................ 59
Data transfer ................................................... 59
16.Battery information ................. 60
Charging and discharging............................ 60
Nokia battery authentication
guidelines ......................................................... 61
Index............................................... 69
6
DRAFT
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when it
may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation. Do
not touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all important
information stored in your device.
7
DRAFT
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed safety
instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is switched on and in service. Press the
end key as many times as needed to clear the display and return to the standby
mode. Enter the emergency number, then press the call key. Give your location.
Do not end the call until given permission to do so.
■About your device
The wireless device described in this guide is approved for use on the GSM 850, 900, 1800,
and 1900 and UMTS 900, 2100 networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect local customs, privacy and
legitimate rights of others, including copyrights.
Copyright protections may prevent some images, music (including ringing tones), and other
content from being copied, modified, transferred, or forwarded.
Your device supports internet connections and other methods of connectivity. Like
computers, your device may be exposed to viruses, malicious messages and applications, and
other harmful content. Exercise caution and open messages, accept connectivity requests,
download content, and accept installations only from trustworthy sources. To increase the
security of your device, consider installing antivirus software with a regular update service
and using a firewall application.
Warning: To use any features in this device, other than the alarm clock, the device
must be switched on. Do not switch the device on when wireless device use may
cause interference or danger.
■Network services
To use the phone you must have service from a wireless service provider. Many of the
features require special network features. These features are not available on all networks;
other networks may require that you make specific arrangements with your service provider
before you can use the network services. Your service provider can give you instructions and
explain what charges will apply. Some networks may have limitations that affect how you
can use network services. For instance, some networks may not support all language-
dependent characters and services.
Your service provider may have requested that certain features be disabled or not activated
in your device. If so, these features will not appear on your device menu. Your device may
also have a special configuration such as changes in menu names, menu order, and icons.
Contact your service provider for more information.
8
DRAFT
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as web browsing, e-mail, push to talk, instant messaging, and
multimedia messaging, require network support for these technologies.
■Enhancements, batteries, and chargers
Check the model number of any charger before use with this device. This device is intended
for use when supplied with power from the AC-3, AC-4, AC-5, DC-4 chargers or CA-44
charger adapter.
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Practical rules about accessories and enhancements
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp and pull
the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and are operating
properly.
• Installation of any complex car enhancements must be made by qualified personnel only.
9
DRAFT
General information
■Access codes
Lock code
The lock code (5 to 10 digits) helps to protect your phone against unauthorized
use. The preset code is 12345. You can change the code and set the phone to
request the code. See Security in General p. 60.
When the device is locked, calls may be possible to the official emergency number
programmed into your device.
PIN codes
The personal identification number (PIN) code and the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your SIM card
against unauthorized use. See Security in General p. 60. The PIN code is usually
supplied with the SIM card.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for
some functions.
The module PIN is required to access the information in the security module. The
signing PIN is required for the digital signature. These PIN codes are supplied with
the SIM card if the SIM card has a security module in it.
PUK codes
The personal unblocking key (PUK) code and the universal personal unblocking key
(UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code,
respectively. The PUK2 code is required to change a blocked PIN2 code.
If the codes are not supplied with the SIM card, contact your local service provider
for the codes.
Barring password
The barring password (4 digits) is required when using Call barring. See Phone
p. 61. You can obtain the password from your service provider. If the password is
blocked, contact your service provider.
10
DRAFT
■Nokia support and contact information
Check www.nokia.com/support or your local Nokia web site for the version of the
user guide, additional information, downloads, and services related to your Nokia
product.
Software updates
Nokia may produce software updates that may offer new features, enhanced functions, or
improved performance. You may be able to request these updates through the Nokia
Software Updater PC application. To update the device software, you need the Nokia
Software Updater application and a compatible PC with Microsoft Windows 2000 or XP
operating system, broadband internet access, and a compatible data cable to connect your
device to the PC.
To get more information and to download the Nokia Software Updater application, visit
www.nokia.com/softwareupdate or your local Nokia web site.
If software updates over the air are supported by your network, you may also be able to
request updates through the device. See "Update software," p. 56.
Downloading software updates may involve the transmission of large amounts of data
through your service provider's network. Contact your service provider for information about
data transmission charges.
Make sure that the device battery has enough power, or connect the charger before starting
the update.
1. Get started
■Insert a (U)SIM card and battery
Always switch the device off and disconnect the charger before removing the battery.
This phone uses BL-5B batteries.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.
1. With the back of the phone facing you, slide
the back cover to remove it.
11
DRAFT
To remove the battery, lift it as shown (3).
2. To release the SIM card holder, slide it backwards
(4), and lift it (5).
3. Insert the (U)SIM card to the SIM card holder (6).
Make sure that the (U)SIM card is properly
inserted and that the golden-colored contact
area on the card is facing downwards, and the
beveled corner faces upwards.
Close the SIM card holder (7), and slide it forward to lock it (8).
4. Replace the battery (9).
5. Replace the back cover (10) and (11).
■MicroSD card slot
Use only compatible microSD cards approved by Nokia for use with
this device. Nokia uses approved industry standards for memory
cards, but some brands may not be fully compatible with this device.
Incompatible cards may damage the card and the device and corrupt
data stored on the card.
Keep microSD cards out of the reach of small children.
You can extend the available memory with a microSD memory card. You can insert
or remove a microSD card without switching the phone off.
Important: Do not remove the memory card in the middle of an operation when
the card is being accessed. Removing the card in the middle of an operation may
damage the memory card as well as the device, and data stored on the card may be
corrupted.
Insert a microSD card
Note that a memory card may be supplied with the phone, and may already be
inserted.
12
DRAFT
1. Opent the side door (1).
2. Place the microSD card in the slot
with the golden contact area facing
down (2). Push the card gently to
lock it into place.
3. Close tight the side door (3).
Remove a microSD card
1. Push the card gently to release it.
Remove memory card and press 'OK'
is displayed. Pull the card out, and
select OK.
2. Close tight the side door.
■Charge the battery
Connect the charger to a wall socket. Connect
the charger to the device.
If the battery is completely discharged, it may
take a few minutes before the charging
indicator appears on the display or before any
calls can be made.
The charging time depends on the charger and
the battery used. Charging a BL-5B battery
with the AC-5 charger takes approximately
MISSING_CONTENT minutes.
■Switch the phone on and off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and select
OK.
If the phone asks for the lock code, enter the lock code, and select
OK. The factory setting for the lock code is 12345.
To set the correct time zone, time, and date, select the country
you are presently in, then enter the local time and date.
13
DRAFT
■Normal operating position
Use the phone only in its normal operating position.
Note: As with any radio transmitting device, avoid
touching an antenna unnecessarily when the antenna is
in use. For example, avoid touching the cellular antenna
during a phone call. Contact with a transmitting or
receiving antenna affects the quality of the radio
communication, may cause the device to operate at a
higher power level than otherwise needed, and may
reduce the battery life.
Your device has internal antennas.
Cellular antenna (1)
Bluetooth antenna (2)
■Transfer data
To transfer information, such as contacts, from your old phone, see Data transfer,
p. 59.
2. Your phone
■Keys and parts
Power key (1)
Loudspeaker (2)
Secondary camera lens
Earpiece (3)
Volume keys (4)
Camera key
Left and right selection keys (5)
Menu key (6),
hereafter described as "select Menu"
Clear key (7)
Call key (8)
14
DRAFT
End key (9)
Navi™ scroll key (10),
hereafter referred to as scroll key
Number keys (11)
Microphone (12)
Nokia AV 2.5-mm connector (13)
Loudspeaker (14)
Charger connector (15)
microSD card slot (16)
USB connector (17)
Main camera lens (18)
Camera flash (19)
■Standby mode
When you have switched on the phone, and it is
registered to a network, the phone is in the standby mode and ready for use.
To open the list of last dialed numbers, press the call key.
To use the voice commands or voice dialing, press and hold the right selection key.
To change the profile, press the power key, and select a profile.
To start a connection to the web, press and hold 0.
Active standby
To select whether the active standby is shown, select Menu > Settings > Phone
sett. > General > Personalisation > Standby mode > Active standby > On or Off.
In active standby the default applications are shown across the top of the active
standby area, and calendar, to-do, and player events are listed below. To select an
application or event, scroll to it, and select it.
Offline profile
The Offline profile lets you use the phone without connecting it to a network, as
indicated by in the signal strength indicator area. All wireless RF signals to or
from your phone are prevented, and you can use your device without a (U)SIM
card. Use the offline profile in radio sensitive environments—on board aircraft or
15
DRAFT
in hospitals. You can listen to music using the music player when the offline
profile is active.
To leave the Offline profile, press the power key, and select another profile.
Important: In the offline profile you cannot make or receive any calls, or use other
features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must
first activate the phone function by changing profiles. If the device has been
locked, enter the lock code.
■Indicators
The phone is connected to a UMTS network.
The HSDPA (network service) in UMTS network is activated.
The phone is connected to a GSM network.
The phone is in offline mode and not connected to a cellular network. See
Offline profile p. 14.
You received messages to the Inbox folder in Messaging.
There are messages waiting to be sent in Outbox.
You have missed calls. See Log p. 23.
The phone keypad is locked. See Keypad lock (keyguard) p. 17.
The loudspeaker is activated.
All calls to the phone are diverted to another number.
A headset is connected to the phone.
A GPRS packet data connection is active. indicates the connection is on
hold and that a connection is available.
A packet data connection is active in a part of the network that supports
EGPRS. indicates the connection is on hold and that a connection is
available. The icons indicate that EGPRS is available in the network, but
your device is not necessarily using EGPRS in the data transfer.
A UMTS packet data connection is active. indicates the connection is
on hold and that a connection is available.
16
DRAFT
Bluetooth is switched on.
Data is being transmitted using Bluetooth. See Bluetooth connection
p. 57.
A USB connection is active.
Other indicators may also be shown.
■Menu
In the menu you can access the functions in your phone. To access the main menu,
press the menu key; hereafter described as "select Menu".
To open an application or a folder, scroll to it, and press the scroll key.
To change the menu view, select Menu > Options > Change Menu view and a
view type. If you change the order of the functions in the menu, the order may
differ from the default order described in this user guide.
To close an application or a folder, select Back and Exit as many times as needed
to return to the standby mode, or select Options > Exit.
To display and switch between open applications, select and hold Menu. The
application switching window opens, showing a list of open applications. Scroll to
an application, and select it.
To mark or unmark an item in applications, press #. To mark or unmark several
consecutive items, press and hold #, and scroll up or down.
Leaving applications running in the background increases the demand on battery power and
reduces the battery life.
View memory consumption
To check memory consumption, select Menu > Options > Memory details >
Phone memory or Memory card. If the phone memory is getting low, remove some
files or move them to the memory card.
■Help
Your device has context-sensitive help. To access help when an application is
open, select Options > Help. To view a list of available help topics in the
appropriate category, select Options > Topic list.
To open a list of all help categories, select Menu > Applications > Help.
17
DRAFT
■Volume control
To adjust the earpiece or loudspeaker volume during a call or when listening to an
audio file, press the volume keys.
To activate the loudspeaker during a call, select Loudspeaker and to deactivate
the loudspeaker during a call, select Handset
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
■Keypad lock (keyguard)
To prevent accidental keypresses, you can lock the keypad.
To lock the keypad , press the left selection key and * within 1.5 seconds. Or, to set
the phone automatically lock the keypad after a certain time, select Menu >
Settings > Phone sett. > General > Security > Phone and SIM card > Keypad
autolock period > User defined and the desired time.
To unlock the keypad , select Unlock, and press * within 1.5 seconds.
When the keypad lock is on, calls may be possible to the official emergency number
programmed into your device.
■My own
You can download applications, such as games, to your phone. They will be saved
in My own folder. To access the applications, selectMenu > Applications > My
own.
■Connect a compatible headset
Do not connect products that create an
output signal as this may cause damage
to the device. Do not connect any voltage
source to the Nokia AV connector.
When connecting any external device or
any headset, other than those approved
by Nokia for use with this device, to the
Nokia AV connector, pay special
attention to volume levels.
18
DRAFT
■Connect a USB data cable
To set the default USB connection
mode, select Menu > Settings >
Connectivity > USB > USB mode and
the desired mode. To set whether the
default mode is activated
automatically, select Ask on
connection > No.
■Attach a wrist strap
Connect the wrist strap according to the
graphic.
3. Call functions
■Make a voice call
1. In the standby mode, enter the phone number, including the area code. Press
the clear key to remove a number.
For international calls, press * twice for the international prefix (the +
character replaces the international access code).
2. To call the number, press the call key.
3. To end the call, or to cancel the call attempt, press the end key.
When security features that restrict calls are in use (such as call barring, closed user group,
and fixed dialing), calls may be possible to the official emergency number programmed into
your device.
To make a call from Contacts, select Menu > Contacts, and scroll to the desired
name. To call the number, press the call key.
19
DRAFT
Call mailbox
To call your voice mailbox, press and hold 1 in the standby mode. Call mailbox is a
network service. Contact your service provider for the call mailbox number.
To define the call mailbox number if no number is set, select Menu > Settings >
Call mailbox, and when Voice mailbox number: is displayed, enter the voice
mailbox number.
To change the call mailbox number, select Menu > Settings > Call mailbox >
Options > Change number, and enter the number.
Speed dialing
Speed dialing is a quick way to call frequently used numbers in the standby mode.
You can assign a phone number to the speed dialing keys, 2 to 9. The 1key is
reserved for the call mailbox.
1. Select Menu > Contacts and a contact.
2. Scroll to a number, and select Options > Assign speed dial. Scroll to the desired
speed dialing key, and select Assign. When you return to the contact
information view, next to the number indicates the assigned speed dial.
Call a speed dialing number in either of the following ways:
• Press the speed dialing key, then the call key.
•If Speed dialling is set to On, press and hold the speed dialing key until the call
begins. To set Speed dialling to On, select Menu > Settings > Phone sett. >
Phone > Call > Speed dialling > On.
To view the number assigned to a speed-dialing key, Menu > Settings > Speed
dial, scroll to the key icon and select Options > View number.
Voice dialing
A voice tag is added automatically to all entries in Contacts.
Use long names, and avoid similar names for different numbers.
Make a voice dialing call
Voice tags are sensitive to background noise. Use voice tags in a quiet environment.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is
played, and Speak now is displayed.
20
DRAFT
If you are using a compatible headset with the headset key, press and hold the
headset key.
2. Speak the voice command clearly. The phone plays the voice command of the
best match. After 1.5 seconds, the phone dials the number; if the result is not
the correct one, before dialing select Next and another entry.
Using voice commands to carry out a phone function is similar to voice dialing.
See Voice commands p. 46.
Make a conference call (network service)
1. Make a call to the first participant.
2. To make a call to another participant, select Options > New call. The first call
is automatically put on hold.
3. To join the first participant in the conference call when the new call is
answered, select Options > Conference.
To add a new person to the call, repeat step 2, and select Options >
Conference > Add to conference. The phone supports conference calls between
a maximum of six participants, including yourself.
4. To end the conference call, press the end key.
■Answer or reject a call
To answer a call, press the call key.
To adjust the volume during the call, press the volume keys.
Tip: If a compatible headset is connected to the phone, press the
headset key to answer and end a call.
To reject the call, press the end key, or select Options > Reject. To send a text
message to the caller informing why you cannot answer the call, select Options >
Send text message, for information on the settings, see Phone p. 61.
Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
Select Options during a call for some of the following options:
Transfer—to connect a call on hold to an active call and disconnect yourself
Replace—to end an active call and replace it by answering the waiting call
21
DRAFT
Send DTMF—to send DTMF tone strings (for example, a password). Enter the DTMF
string or search for it in Contacts. To enter a wait character (w) or a pause
character (p), press * repeatedly. To send the tone, select OK.
Call waiting (network service)
During a call, to answer the waiting call, press the call key. The first call is put on
hold. To end the active call, press the end key.
To activate the Call waiting function, select Menu > Settings > Phone sett. >
Phone > Call > Call waiting > Activate.
To switch between the two calls, select Swap.
■Make a video call
To be able to make a video call, you may need to have a USIM card and be in the
coverage of a UMTS network. For availability of and subscription to video call
services, contact your service provider. A video call can only be made between two
parties and when there are not other voice, video, or data calls active. The video
call can be made to a compatible mobile phone or an ISDN client. .
You are not receiving video (the recipient is not sending video or the network
is not transmitting it).
You have denied video sending from your device.
1. Enter the phone number in the standby mode; or select Menu > Contacts, and
scroll to the desired contact.
2. Select Options > Call > Video call.
To change between showing video or only hearing sound, select Enable or
Disable > Sending video, Sending audio, or Sending aud. & video.
Even if you have denied video sending during a video call, the call will still be
charged as a video call. Check the pricing with your network operator or
service provider.
3. To end the video call, press the end key.
Answer a video call
When a video call arrives, is displayed. Press the call key to answer the call.
Select Yes to activate video sending and to show the image captured by the
camera in your phone to the caller. To end the video call, press the end key.
22
DRAFT
Even if you have denied video sending during a video call, the call is still charged
as a video call. Check the pricing with your service provider.
Video sharing
To use Video sharing you must do the following:
• Ensure that your device is set up for person-to-person connections, also known
as session initiation protocol (SIP). Ask your service provider for SIP settings
and save them in your phone. To enter a recipient’s SIP addressa on your
contact card for that person, select Menu > Contacts, a contact, and
Options > Edit > Options > Add detail > SIP or Share view. Enter the SIP
address in the format sip:username@domainname (you can use an IP address
instead of a domain name).
• Ensure that you and the recipient have active UMTS connection and are within
UMTS network coverage. If you start the sharing session while you are within
UMTS network coverage and a handover to GSM occurs, the sharing session is
discontinued, but your voice call continues.
Share live video
1. When a voice call is active, select Options > Share video > Live video.
2. The phone sends the invitation to the SIP address you have added to the
contact card of the recipient.
If the recipient has several SIP addresses in the contact card, select the SIP
address to which you want to send the invitation, and Select to send the
invitation.
3. Sharing begins automatically when the recipient accepts the invitation.
The loudspeaker is active. You can also use a headset to continue your voice
call while you share live video.
4. Select Pause to pause the sharing session. Select Continue to resume sharing.
5. To end the sharing session, select Stop. To end the voice call, press the end key.
Accept an invitation
When you receive an invitation message displaying the sender’s name or SIP
address, select from the following:
Accept—to begin the sharing session and activate the View mode.
23
DRAFT
Reject—to decline the invitation. The sender receives a message that you rejected
the invitation. You can also press the end key to decline the sharing session and
disconnect the voice call.
To end the sharing session, select Stop.
■Log
To view missed, received, or dialed calls, text messages, packet data connections,
and fax and data calls registered by the phone, select Menu > Log.
In the standby mode, you can use the call key as a shortcut to the Recent calls log
(a network service).
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Note: Some timers, including the life timer, may be reset during service or software
upgrades.
4. Write text
When you write text, appears on the top right of the display, indicating
predictive text input, or appears, indicating traditional text input. To set the
predictive text input on or off when writing text, press *, and select Predictive text
on or Predictive text > Off.
, , or is displayed next to the text input indicator, indicating
the character case. To change the character case, press #.
indicates the number mode. To change between letter and number mode,
press # repeatedly until number mode is active.
■Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character appears. The
availability of characters depends on the selected writing language. To select the
language, select Menu > Settings > Phone sett. > General > Personalisation >
Language > Writing language.
If the next letter you want is on the same key as the present one, wait until the
cursor appears (or scroll forward to end the time-out period), and enter the letter.
To insert a number, press and hold the number key.
24
DRAFT
The most common punctuation marks and special characters are available under
the 1key. For more characters, press and hold *.
To erase a character, press the clear key. To erase more characters, press and hold
the clear key.
To insert a space, press 0. To move the cursor to the next line, press 0 three times.
■Predictive text input
To enter any letter with a single keypress, use predictive text input.
1. To write the desired word, press the keys 2–9. Press each key only once for one
letter. The word changes after every keypress.
For the most common punctuation marks, press 1. For more punctuation marks
and special characters, press and hold *.
To erase a character, press the clear key.
2. When you have finished the word and it is correct, to confirm it, scroll forward
or insert a space.
If the word is not correct, to view the matching words the dictionary has found
one by one, press * repeatedly.
If the ? character is shown after the word, the word you intended to write is
not in the dictionary. To add a word to the dictionary, select Spell. Enter the
word (up to 32 letters) using traditional text input, and select OK.
■Copy text
1. To select letters and words, press and hold #, and at the same time scroll left or
right. To select lines of text, press and hold #, and at the same time scroll up or
down.
2. To copy the text to the clipboard, press and hold #, and at the same time select
Copy.
3. To insert the text, scroll to the insertion point, press and hold #, and at the
same time select Paste.
5. Messaging
25
DRAFT
To open the Messaging menu, select Menu > Messaging. You can see the New
message function and a list of default folders:
Inbox—contains received messages except e-mail and cell broadcast
messages. When there are unread messages in the inbox, the icon changes to .
To open a received message, select Menu > Messaging > Inbox and the desired
message.
My folders—for organizing your messages into folders. You can create new
folders, rename and delete folders.
Mailbox—for connecting to your remote mailbox to retrieve your new e-mail
messages or viewing your previously retrieved e-mail messages offline. After you
define settings for a new mailbox, the name given to that mailbox is displayed
instead of Mailbox.
Before you can send, receive, retrieve, reply to, and forward e-mail to a separate
e-mail account, you must configure an internet access point (IAP), see Connection
p. 52, and define your e-mail settings, see E-mail settings p. 29.
Drafts—saves draft messages that have not been sent.
Sent—saves the messages that are sent, excluding messages sent using
Bluetooth.
Outbox—temporarily saves the messages waiting to be sent.
Re ports (network service) — saves the delivery reports of sent messages
■Write and send messages
Your device supports the sending of text messages beyond the character limit for a single
message. Longer messages are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use accents or other marks, and characters
from some language options, take up more space, limiting the number of characters that can
be sent in a single message.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.
1. To create a message, select Menu > Messaging > New message > Text
message, Multimedia message, Audio message, or E–mail.
Audio messages are multimedia messages that consist of a single sound clip
and are sent using a multimedia message center.
26
DRAFT
2. Press the scroll key to select the recipients or groups from Contacts or enter
the phone number or e-mail address of the recipient in the To field. Separate
recipients with a semicolon (;).
3. When creating an e-mail or multimedia message, scroll down to the subject
field, and write the message subject.
4. Scroll down to the message field.
5. Write the message. The message length indicator shows how many characters
you can enter in the message. For example, 10 (2) means that you can still add
10 characters for the text to be sent as two separate text messages.
To use a template for the text message, select Options > Insert > Template.
To use a text template for the multimedia message, select Options > Insert
object > Template or to add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or Video clip.
To record a new sound clip for an audio message, select Options > Insert sound
clip > New sound clip. To use a previously recorded sound clip, select Options >
Insert sound clip > From Gallery, scroll to the sound clip, and select it.
To add a media object to an e-mail, select Options > Insert > Image, Sound
clip, Video clip, Note or Template.
6. To send the message, select Options > Send.
■My folders
You can organize your messages into folders, create new folders, and rename and
delete folders.
Select Menu > Messaging > My folders. To create a folder, select Options > New
folder, and enter a name for the folder.
■Mailbox
Select Menu > Messaging > Mailbox. When Connect to mailbox? is displayed,
select Yes to connect to your mailbox (network service) or No to view previously
retrieved e-mail messages offline.
To connect to the mailbox afterwards, select Options > Connect.
Important: Exercise caution when opening messages. E-mail messages may
contain malicious software or otherwise be harmful to your device or PC.
27
DRAFT
To retrieve all e-mail messages from the mailbox to your phone, select Options >
Retrieve e-mail > All.
To delete an e-mail from the phone while still retaining it in the remote mailbox,
select Options > Delete > Phone only. The e-mail heading stays in your phone. To
delete an e-mail from the phone and the remote mailbox, select Options >
Delete > Phone and server.
To cancel deletion of an e-mail from both the phone and server, scroll to an e-mail
that has been marked to be deleted during the next connection, and select
Options > Restore.
When you are online, to end the data connection to the remote mailbox, select
Options > Disconnect. You can view the retrieved e-mail messages and headings
offline.
■View messages on the SIM card
To view messages on the SIM card, select Menu > Messaging > Options > SIM
messages, and copy the SIM messages to a folder in your phone.
■Messaging settings
Text message settings
Select Menu > Messag. > Options > Settings > Text message and from the
following options:
Message centres — lists all the defined message centers.
Msg. centre in use — defines which message center is used for delivering text
messages and special message types such as business cards.
Character encoding > Full support — to select all characters in the message to be
sent as viewed. If you select Reduced support, characters with accents and other
marks may be converted to other characters.
Receive report — When set to Yes, the status of the sent message (Pending, Failed,
Delivered) is shown in Reports (network service).
Message validity — If the recipient of a message cannot be reached within the
validity period, the message is removed from the message service center. Note
that the network must support this feature. Maximum time — the maximum
amount of time allowed by the network for which the message remains valid.
Message sent as — to define how the message is sent. Default is Text.
28
DRAFT
Preferred conn. — You can send text messages using the normal GSM network or,
if supported by the network, packet data.
Reply via same ctr. (network service) — If you select Yes, and the recipient replies
to your message, the return message is sent using the same message service
center number. All networks do not provide this option. For availability, contact
your network operator or service provider.
Multimedia messaging settings
Select Menu > Messag. > Options > Settings > Multimedia message and from
the following options:
Image size — Define the size of the image in a multimedia message: Small (max.
160 x 120 pixels) or Large (max. 640 x 480 pixels). If you select Original, the
image is not scaled.
MMS creation mode — If you select Guided, the phone informs you if you try to
send a message that may not be supported by the recipient. To set the phone to
prevent you from sending messages that are not supported, select Restricted. If
you select Free, message creation is not restricted, but the recipient may not be
able to view your message.
Access point in use — Select which access point is used as the preferred
connection for multimedia messaging.
Multimedia retrieval — To receive multimedia messages only when you are in your
home network, select Auto. in home network. To always receive multimedia
messages, select Always automatic. To retrieve messages manually, select
Manual. To not receive any multimedia messages or advertisements, select Off.
Allow anon. msgs. — To reject messages coming from an anonymous sender, select
No.
Receive adverts — Define whether you want to allow reception of multimedia
message advertisements.
Receive report — If you want the status of the sent message (Pending, Failed, or
Delivered) to be shown in Reports, select Yes.
Deny report sending > Yes — to deny sending delivery reports.
Message validity (network service) — If the recipient of a message cannot be
reached within the validity period, the message is removed from the multimedia
message center. Maximum time is the maximum amount of time allowed by the
network for which the message remains valid.
29
DRAFT
E-mail settings
Before you use e-mail, you must configure an internet access point (IAP) and
define your e-mail settings correctly. Follow the instructions given by your e-mail
service provider and internet service provider.
Select Menu > Messaging > Options > Settings > E-mail > Mailboxes and a
mailbox. If no mailbox settings have been defined, you are asked if you want to
define the settings.
Select from the following:
Connection settings—To define the correct Incoming e-mail and Outgoing e-mail
settings, contact your e-mail service provider for the settings
User settings—To define settings for sending your e-mails and set the phone to
alert when receiving a new e-mail
Retrieval settings—To define settings for retrieving e-mail messages, such as
retrieving only message headers, the number of messages to retrieve
Automatic retrieval —To define whether to automatically retrieve the headings to
your device when you receive a notification of new e-mail in your remote mailbox,
or to have e-mail headers automatically retrieved
■Message reader
With Msg. reader, you can listen to received text, multimedia, and e-mail
messages.
To listen to a message in Inbox or Mailbox, scroll to the message or mark the
messages, and select Options > Listen. To skip to the next message, scroll down.
Tip: When 1 new message or New e-mail is displayed in the standby mode,
to listen to the received messages, press and hold the left selection key
until Msg. reader starts.
To select the default language and voice used for reading messages and adjust the
voice properties, such as rate and volume. Select Menu > Settings > Speech.
6. Contacts
To save and manage contact information, such as names, phone numbers, and
addresses, select Menu > Contacts.
30
DRAFT
To add a new contact, select Options > New contact. Fill in the fields you want,
and select Done.
To assign default numbers and addresses, select a contact and Options > Defaults.
Scroll to the desired default option, and select Assign.
To copy names and numbers from a SIM card to your phone, select Options > SIM
contacts > SIM directory. Scroll to the name you want to copy or mark the desired
names, and select Options > Copy to Contacts.
To copy a phone, fax, or pager number from contacts to your SIM card, scroll to
the contact you want to copy, and select Options > Copy > To SIM directory.
Create a contact group so that you can send text or e-mail messages to several
recipients at the same time. Select Menu > Contacts, scroll right, and select
Options > New group. Enter a name for the group, and select the group. Select
Options > Add members. Mark the contacts you want to add to the group, and
select OK.
7. Personalisation
■Themes
To change the look of your phone display, activate a theme. .
Select Menu > Settings > Themes. To see a list of the available themes, select
General. The active theme is indicated by a check mark.
To preview a theme, scroll to the theme, and select Options > Preview. To activate
the previewed theme, select Set.
In Themes, you can also set the menu view type, set a custom wallpaper, and
personalize the look of the power saver.
To apply a theme, select Menu > Settings > Themes > General and a theme of
your choosing.
■Profiles
In Profiles, you can adjust and personalize the phone tones for different events,
environments, or caller groups. You can see the currently selected profile at the
top of the display in the standby mode. If the General profile is in use, only the
current date is shown.
31
DRAFT
Select Menu > Settings > Profiles.
To activate the profile, select the profile and Activate.
To personalize a profile, select the profile, Personalise and from the following
options:
Ringing tone — To set the ringing tone for voice calls, choose a ringing tone from
the list.
Say caller's name — Select On to have the phone say the caller’s name when the
phone is ringing.
Ringing type — When Ascending is selected, the ringing volume starts from level
one and increases level by level to the set volume level.
Ringing volume — Set the volume level for the ringing and message alert tones.
Message alert tone — Set the alert tone for text and multimedia messages.
E-mail alert tone — Set the alert tone for e-mail messages.
Vibrating alert — Set the phone to vibrate to alert for incoming calls and
messages.
Keypad tones — Set the volume level for keypad tones.
Warning tones — Activate or deactivate warning tones.
Alert for — Set the phone to ring only upon calls from phone numbers that belong
to a selected contact group.
Profile name — This setting is not shown for the General and Offline profiles.
When using the Offline profile, the phone is not connected to the GSM network. If
no SIM card is installed, to use some functions of the phone, start the phone in
Offline.
Important: In the offline profile you cannot make or receive any calls, or use other
features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must
first activate the phone function by changing profiles. If the device has been
locked, enter the lock code.
32
DRAFT
8. Media applications
■Gallery
Select Menu > Gallery.
Use Gallery to store and organize your images, video clips, music tracks, sound
clips, track lists, streaming links, .ram files, and presentations.
To copy files to phone memory or to the memory card, select the folder (such as
Images), scroll to the file or mark the files, and select Options > Organise > Copy
to phone mem. or Copy to memory card.
To set an image as your wallpaper, select Images, and scroll to the image. Select
Options > Use image > Set as wallpaper. To assign the image to a contact, select
Assign to contact.
To download files, select Menu > Gallery, the folder for the file type you want to
download, and the download function (for example, Images > Downl. graphics).
The browser opens. Choose a bookmark for the site to download from.
Edit images
To edit images in Gallery, scroll to the image, and select Options > Edit.
To crop an image, select Options > Apply effect > Crop. To crop the image size
manually, select Manual or a predefined aspect ratio from the list. If you select
Manual, a cross appears in the upper left corner of the image. Scroll to select the
area to crop, and select Set. Another cross appears in the lower right corner. Again
select the area to be cropped. To adjust the first selected area, select Back. The
selected areas form a rectangle, which forms the cropped image.
If you selected a predefined aspect ratio, select the upper left corner of the area to
be cropped. To resize the highlighted area, use the scroll key. To freeze the
selected area, press the scroll key. To move the area within the picture, scroll. To
select the area to be cropped, press the scroll key.
To reduce red eye in an image, select Options > Apply effect > Red eye reduction.
Move the cross onto the eye, and press the scroll key. A loop appears on the
display. To resize the loop to fit the size of the eye, scroll up, down, left, or right. To
reduce the redness, press the scroll key.
Shortcuts in the image editor:
33
DRAFT
• To view an image in the full screen, press *. To return to the normal view, press *
again.
• To rotate an image clockwise or counterclockwise, press 3 or 1.
• To zoom in or out, press 5 or 0.
• To move on a zoomed image, scroll up, down, left, or right.
Edit video clips
To edit video clips in Gallery and create custom video clips, scroll to the video clip,
and select Options > Video editor.
In the video editor you can see two timelines: video clip timeline and sound clip
timeline. The images, text, and transitions added to a video clip are shown on the
video clip timeline. To switch between the timelines, scroll up or down.
Modify video
To modify the video, select from the following options:
Edit video clip—To cut, move, remove or duplicate the video clip; set a background
or a color effect to the video clip; mute the sound or adjust the volume of the
video clip; and to slow the speed of it.
Edit text (shown only if you added text)—To move, remove, or duplicate text;
change the color and style of the text; define how long it stays on the screen; and
add effects to the text.
Edit image (shown only if you added an image)—To move, remove, or duplicate an
image; define how long it stays on the screen; and set a background or a color
effect to the image.
Edit sound clip (shown only if you have added a sound clip)—To cut or move the
sound clip, to adjust its length, or to remove or duplicate the clip.
Edit transition—There are three types of transitions: at the start of a video, at the
end of a video, and transitions between video clips. You can select start transition
when the first transition of the video is active.
Insert—Select Video clip, Image, Text, Sound clip, or New sound clip.
Movie—Preview the movie in the full screen or as a thumbnail, save or send the
movie, or cut the movie to a proper size for sending it in a multimedia message.
To take a snapshot of a video clip, in the cut video view, select Options > Take
snapshot. In the thumbnail preview view, press the scroll key, and select Take
snapshot.
34
DRAFT
To save your video, select Options > Movie > Save. To define the Memory in use,
select Options > Settings.
To send the video, select Send > Via multimedia, Via e-mail or Via Bluetooth.
Contact your service provider for details of the maximum multimedia message
size that you can send. If your video is too large to send in a multimedia message,
appears.
■Camera
To use the camera, press the camera key or select Menu > Media > Camera. To
take a self portrait, select Options > Use secondary camera.
To capture an image, press the capture key. The image is saved to Images in
Gallery, and the image is displayed. To return to the viewfinder, select Back. To
delete the image, press the clear key.
To zoom in or out, scroll up or down.
To turn the flash on (available only in the main camera), select Options > Flash >
On. If you select Automatic, flash is used automatically when necessary.
Keep a safe distance when using the flash. Do not use the flash on people or animals at close
range. Do not cover the flash while taking a picture.
To record a video, select Options > Video mode, and press the scroll key or camera
key to start recording.
To use the panorama mode, select Options > Panorama mode,. Press the
capture key to capture a panorama image. The panorama preview is displayed.
Turn slowly to right or left. You cannot change the direction. If the arrow on the
display is red, you are turning too fast. To stop the panorama, press the
capture key again. The panorama mode is available only in the main camera.
Your device supports an image capture resolution of 1600 x 1200 pixels.
■Music player
To open the music player, select Menu > Music player.
Music library
Music library is a database of the available music tracks. To open the music library,
in the music player main view, select Options > Music library.
To update the music library and search for music tracks in the phone memory and
on the memory card, select Options > Update Music library.
35
DRAFT
To play a specific album, select Albums, scroll to the album, and select Options >
Play. To listen to specific tracks on the album, select Albums and an album, mark
the tracks, and select Options > Play.
Track lists
To compile and save your own track list, select Track lists > Options > New track
list. Select the memory in which to save the track list, and enter a name for the
track list. Mark the desired tracks, and press the scroll key.
To listen to a track list, select Track lists, scroll to the track list, and select
Options > Play.
Listen to music
Warning: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
To start playing or pause playback, press the scroll key. To skip to the next or
previous track, scroll down or up. To fast forward or rewind, press and hold the
scroll key down or up.
To see the currently playing track list, select Options > Open ’Now playing’.
To adjust the tone of the sound and apply effects to the sound, select Options >
Audio settings.
To enhance or diminish frequencies during music playback and modify how your
music sounds, select Options >Audio settings > Equaliser.
To use a preset, scroll to it, and select Options > Activate.
■Visual Radio
You can use the Visual Radio application as a FM radio with automatic tuning and
preset stations, or with parallel visual information related to the radio program if
you tune in to stations that offer Visual Radio service and your network operator
supports the service. The Visual Radio service uses packet data (network service).
Visual Radio cannot be started when the phone is in offline mode.
The FM radio depends on an antenna other than the wireless device antenna. A compatible
headset or enhancement needs to be attached to the device for the FM radio to function
properly.
36
DRAFT
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
You can make a call or answer an incoming call while listening to the radio. The
radio is turned off when there is an active call.
To open Visual Radio, select Menu > Media > Radio. To turn the radio off, select
Exit.
9. Web
■Web
To browse web pages, select Menu > Web.
Check the availability of services, pricing, and tariffs with your service provider.
Service providers also give you instructions on how to use their services.
Copyright protections may prevent some images, music (including ringing tones), and other
content from being copied, modified, transferred or forwarded.
Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the Java
VerifiedTM testing.
Set up the phone for the browser service
Your device may configure the WAP or internet access point automatically based
on your SIM card.
You may receive service settings in a configuration message from the service
provider.
To define an access point manually, see Access points in Connection p. 52.
Make a connection
To access web pages, do the following:
• Select the home page ( ) of your service provider.
• Select a bookmark from the bookmarks view.
• In the bookmarks view, enter the address of the web page, and select Go to.
37
DRAFT
View bookmarks
Your device may have preinstalled bookmarks and links for third-party internet sites. You
may also access other third-party sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose
to access such sites, you should take precautions for security or content.
Bookmarks are indicated by the following icons:
The starting page defined for the default access point.
The automatic bookmarks folder contains bookmarks ( ) that are collected
automatically when you browse pages.
Any bookmark showing the title or internet address of the bookmark.
and may be replaced with the website’s icon.
Connection security
If the security indicator is displayed during a connection, the data transmission
between the device and the internet gateway or server is encrypted.
The security icon does not indicate that the data transmission between the gateway and the
content server (or place where the requested resource is stored) is secure. The service
provider secures the data transmission between the gateway and the content server.
To view details about the connection, encryption status, and information about
server authentication, select Options > Tools > Page info.
Keys and commands for browsing web pages
To open a link, press the scroll key.
To check boxes and make selections, press the scroll key.
To go to the previous page while browsing, select Back;
To save a bookmark while browsing, select Options > Save as bookmark.
To retrieve the latest content from the server, select Options > Navigation
options > Reload.
To open the browser toolbar, scroll to an empty part of the page, and press the
scroll key.
Keypad shortcuts while browsing
1—Open your bookmarks.
2—Search for keywords in the current page.
38
DRAFT
3—Return to the previous page.
5—List all open windows.
8—Show the page overview of the current page. Press 8 again to zoom in and view
the desired section of the page.
9—Enter a new web address.
0—Go to the start page.
* or #—Zoom the page in or out.
Mini map
Mini map helps you navigate web pages that contain large amount of
information. To set Mini map on, select Options > Settings > General > Mini map.
Web feeds and blogs
The browser automatically detects if a web page contains web feeds. To subscribe
to a web feed, select Options > Subscribe and a feed, or click on the link. To view
the web feeds you have subscribed to, in the bookmarks view, select Web feeds.
To update a web feed, select it, and Options > Refresh.
To define how the web feeds are updated, select Options > Settings > Web feeds.
Saved pages
You can save pages and view them later offline.
To save a page while browsing, select Options > Tools > Save page.
To open the Saved pages view, in the bookmarks view, select Saved pages. To open
a page, select it.
To start a connection to the browser service and retrieve the page again, select
Options > Navigation options > Reload. The phone stays online after you reload
the page.
End a connection
To end the connection and view the browser page offline, select Options > Tools >
Disconnect. To quit browsing and to return to the standby mode, select Options >
Exit.
Empty the cache
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
39
DRAFT
after each use. The information or services you have accessed are stored in the cache. To
empty the cache, select Menu > Web > Options > Clear privacy data > Clear cache.
To clear all privacy data, including the cache, cookies, form data passwords, and
browsing history, select Menu > Web > Options > Clear privacy data > All.
Browser settings
Select Options > Settings > General, Page, Privacy or Web feeds, and from the
following:
General
Access point—Select the default access point.
Homepage—Define the address of the desired homepage.
Mini map—Set on or off.
History list—Select whether a list of the pages you have visited during the current
browsing session are displayed when you select Back.
Security warnings—Hide or show security notifications.
Java/Ecma Script—Enable or disable the use of scripts.
Page
Load content — Select what type of content is loaded automatically while
browsing. If you select Text only, to load images during browsing, select Options >
Tools > Load images.
Screen size—Choose how to use the display area for viewing pages.
Default encoding—When you select Automatic, the browser automatically tries to
choose the correct character encoding.
Block pop-ups—Allow or block automatic opening of different pop-ups while
browsing.
Automatic reload—Enable or disable automatic refresh of browser pages.
Font size—Select the font size.
Privacy
Auto. bookmarks—Select On if you want the bookmarks to be automatically saved
in the Auto. bookmarks folder when you visit a page.
Form data saving—If you do not want the data you enter to different forms on a
web page to be saved and used next time the page is entered, select Off.
40
DRAFT
Cookies—Enable or disable the receiving and sending of cookies (a means for
content providers to identify users and their preferences for frequently used
content).
Web feeds
Automatic updates—Define whether you want the web feeds to be updated
automatically or not, and how often you want to update them. Setting the
application to retrieve web feeds automatically may involve the transmission of
large amounts of data through your service provider's network. Contact your
service provider for information about data transmission charges.
Acc. point for auto-update—Select the desired access point for updating (only
available when Automatic updates is on).
10. Time management
■Clock
Select Menu > Organiser > Clock. To change the clock settings, and to set the
time and date, select Options > Settings.
Alarm clock
To set a new alarm, scroll right to Alarm, and select Options > New alarm. Enter
the alarm time, select whether and when the alarm is repeated, and select Done.
To cancel an alarm, scroll to the alarm, and select Options > Remove alarm. To
deactivate a repeated alarm, select Options > Deactivate alarm.
Select Stop to turn off the alarm.
Select Snooze to stop the alarm for 5 minutes, after which it resumes. You can do
this a maximum of five times.
If the alarm time is reached while the device is switched off, the device switches itself on
and starts sounding the alarm tone. If you select Stop, the device asks whether you want to
activate the device for calls. Select No to switch off the device or Yes to make and receive
calls. Do not select Yes when wireless phone use may cause interference or danger.
World clock
To open the world clock view, scroll right to World. To add cities to the list, select
Options > Add city.
41
DRAFT
To set your current city, scroll to a city, and select Options > Set as current city.
The city is displayed in the clock main view, and the time in your device is changed
according to the city selected. Check that the time is correct and matches your
time zone.
■Calendar
Select Menu > Organiser > Calendar. Press # in the month, week, or day views to
automatically highlight the current date.
To create a new calendar entry, select Options > New entry and an entry type.
Anniversary entries are repeated every year. To-do entries help you to keep a list of
tasks that you need to do. Fill in the fields, and select Done.
11. Office applications
■Adobe Reader
Use Adobe Reader to view portable document format (.pdf) documents. To open
the application, select Menu > Applications > Adobe PDF.
To open a recently viewed document, select it. To open a document that is not
listed in the main view, select Options > Browse for file the memory and folder
wherein the file resides and the file.
To move around within a page, scroll. To move to the next page, scroll down at the
bottom of the page.
To find text, select Options > Find > Text, and enter the text you want to find. To
find the next occurrence, select Options > Find > Next.
To save a copy of the document, select Options > Save, and specify where to save
it.
Settings
Select Options > Settings and from the following settings:
Default zoom % — to set the default zoom when opening a .pdf file for viewing
View mode > Full screen — to open documents in full screen mode
Save settings on exit > Yes — to save the settings as default when you exit Adobe
Reader
42
DRAFT
■Quickoffice
To use the Quickoffice applications, select Menu > Applications > Quickoffice.
To view a list of Word, Excel, and PowerPoint documents, scroll right or left to the
Quickword, Quicksheet, or Quickpoint view. For example, available Microsoft
Word documents are listed in the Quickword view.
To open a file in its respective application, select it. To sort files, select Options >
Sort by and an option.
Quickword
With Quickword, you can view native Microsoft Word documents on the display of
your device. Quickword supports colors, bold, italics, and underline.
Quickword supports the viewing of documents saved in .doc format in Microsoft
Word 97, 2000, XP, and 2003. Not all variations or features of the mentioned file
formats are supported.
To move in the document, scroll.
To search the document for text, select Options > Search options > Find.
Quicksheet
With Quicksheet, you can read Microsoft Excel files on the display of your device.
Quicksheet supports the viewing of spreadsheet files saved in .xls format in
Microsoft Excel 97, 2000, XP, and 2003. Not all variations or features of the
mentioned file formats are supported.
View spreadsheets
To move around in the spreadsheet, scroll.
To switch between worksheets, select Options > Worksheet.
To search the speadsheet for a text within a value or formula, select Options >
Search options > Find.
To change how the spreadsheet is displayed, select Options and from the
following:
Pan—to navigate within the current worksheet by blocks. Scroll to the desired
block, and select it.
Zoom—to zoom in or out
43
DRAFT
Freeze panes—to keep the rows and columns above and to the left of the selected
cell visible
Resize—to adjust the size of columns or rows
Quickpoint
With Quickpoint, you can view Microsoft PowerPoint presentations on the display
of your device.
Quickpoint supports the viewing of presentations created in .ppt format in
Microsoft PowerPoint 2000, XP, and 2003. Not all variations or features of the
mentioned file formats are supported.
View presentations
To move between the slide, outline, and the notes view, scroll left or right.
To move to the next or previous slide in the presentation, scroll down or up.
To view the presentation in full screen, select Options > Full screen.
To expand items in the presentation outline in the outline view, select Options >
Expand.
Quickmanager
With Quickmanager, you can download software, including updates, upgrades,
and other useful applications. You can pay for the downloads by phone bill or
credit card.
To open Quickmanager, select Menu > Applications > Quickoffice, and scroll right
to the Quickmanager view.
More information
If you experience problems with Quickword, Quicksheet, or Quickpoint, visit
www.quickoffice.com for more information. Support is also available by sending
an e-mail to supportS60@quickoffice.com.
44
DRAFT
12. Locationing
■Maps
With Maps and a compatible GPS receiver with Bluetooth connectivity, you can
see your current location on the map, browse maps for different cities and
countries, search for addresses and different points of interest, plan routes from
one location to another, and save locations as landmarks and send them to
compatible devices.
Select Menu > Applications > Maps.
When using Maps for the first time, you may need to define an internet access
point for downloading map information for your current location.
Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely
on the cartography that you download for use in this device.
All the maps downloaded by Maps are free of charge, but downloading may
involve the transmission of large amounts of data through your service provider's
network. For more information on data transmission charges, contact your service
provider.
To receive a note when your device registers to a network outside your home
cellular network, select Options > Settings > Network > Roaming warning > On.
Browse maps
To move on the map, scroll up, down, left, or right. To view detailed information of
a location on the map, select it and Details.
To return to your current location, select Options > Current location. To zoom in
or out on the map, press or . To switch between the 2-D and 3-D views,
press .
Update maps
To check the map server for map updates, select Options > Settings > Network >
Options > Check for map updates. To define automatic downloading of maps
through internet, select Options > Settings > Network > Use network > On.
Automatic download may involve transmission of large amounts of data. Contact
your service provider for more information on data transmission charges.
Extra services
45
DRAFT
To purchase and download city guides for different cities to your device, or
purchase a navigation service with voice guidance to use it in Maps, select
Options > Extra services > City guides or Add navigation.
■GPS data
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone
complies with government regulations on location-based emergency calling
services.
With GPS data you can view your current location, find your way to a desired
location, and track distance. The application requires a Bluetooth GPS
enhancement to operate. You must also have Bluetooth GPS positioning method
enabled in Menu > Settings > Phone sett. > General > Positioning > Positioning
methods.
Select Menu > Applications > My own > GPS data.
In GPS data and Landmarks, coordinates are expressed in degrees and decimal
degrees format using WGS-84 coordinate system.
■Landmarks
Landmarks are coordinates to geographic locations that you can save to your
device for later use in different location-based services. You can create landmarks
using a Bluetooth GPS enhancement or network (network service).
Select Menu > Applications > My own > Landmarks.
■Download!
Download! (network service) is a mobile content shop available on your device.
You may be able to download some content free of charge.
With Download! you can discover, preview, buy, download, and upgrade content,
services, and applications. The items are categorized under catalogs and folders
provided by different service providers. The available content depends on your
service provider.
Select Menu > Download!.
Download! uses your network services to access the most up-to-date content. For
information on additional items available through Download!, contact your
service provider, or the supplier or manufacturer of the item.
46
DRAFT
13. Settings
■Voice commands
To select the functions to use by voice command, select Menu > Settings > Voice
comm.. The voice commands for changing profiles are in the Profiles folder.
To activate a new voice command for an application, select Options > New
application and the application. To play the activated voice command, select
Options > Playback.
To use voice commands, see Voice dialing p. 19.
■Phone settings
General
Select Menu > Settings > Phone sett. > General > Personalisation, Date and time,
Enhancement, Security, Factory settings, or Positioning.
Personalisation
Select Display, Standby mode, Tones, Language, Themes, or Voice comms..
Display
Brightness—to adjust the brightness of the display
Font size—to select the font size used in lists and editors
Power saver time-out—to set the time-out period after which the power saver is
activated
Welcome note / logo—to set the welcome note or logo which is displayed briefly
each time you switch on the phone.
Light time-out—to set the time-out for the display light
Standby mode
Active standby—to enable or disable active standby. See Active standby p. 14.
Shortcuts—to assign shortcuts for the right and left selection keys, scrolling in
different directions or pressing the scroll key in the standby mode. The scroll key
shortcuts are not available if Active standby is On.
Active standby apps.—to select the application shortcuts to appear in the active
standby. This setting is available only if Active standby is set to On.
47
DRAFT
Operator logo—this setting is visible only if you have received and saved an
operator logo. You can select whether the operator logo is shown.
Tones
Change the tones of the clock, calendar and currently active profile. See Profiles
p. 52.
Language
Phone language—to change the language for the display texts in your phone. If
you select Automatic, the phone selects the language according to the
information on your SIM card.
Writing language—to change the writing language of your phone. Changing the
language affects the characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—to set predictive text input On or Off for all editors in the phone.
Select a language for entering predictive text from the list.
Themes
Apply themes. See Themes p. 52.
Voice commands
Edit voice command and voice dialing settings. See Voice commands p. 74.
Date and time
Time and Date—to set the time and date
Time zone—to set the time zone of your location. If you set Network operator
time > Auto-update, the local time is shown.
Network operator time (network service) — to allow the network to update time,
date, and time zone information to your phone. If you select Auto-update, all
active connections are disconnected. Check any alarms as these may be affected.
Enhancement
To change settings of an enhancement, in the Enhancement sett. view, scroll to an
enhancement, such as Headset, select Options > Open and from the following
options:
Default profile—to select the profile you want to activate each time you connect
the enhancement to your phone
Automatic answer—to set the phone to answer an incoming call automatically
after 5 seconds when this enhancement is connected to your phone. If the Ringing
48
DRAFT
type is set to Beep once or Silent, automatic answer cannot be used, and you must
answer the phone manually.
Lights—To set the phone lights continuously on while using the enhancement,
select On.
Security
Select Phone and SIM card, Certificate management, or Security module.
Phone and SIM card
You can change the following codes: lock code, (U)PIN code, and PIN2 code.
Avoid using access codes similar to emergency numbers to prevent accidental
dialing of the emergency number.
Code in use—to select the active code, PIN or UPIN, for the active USIM. This is
shown only if the active USIM supports UPIN, and the UPIN is not rejected.
PIN code request or UPIN code request—to set the phone to request the code each
time the phone is switched on. Some SIM cards may not allow the PIN code
request to be turned Off.
PIN code or UPIN code, PIN2 code, and Lock code—to change the codes. These
codes can only include the numbers from 0 to 9.
Keypad autolock period > User defined—to automatically lock the keypad after a
defined period of inactivity
Phone autolock period—to set a time-out after which the phone is automatically
locked. To use the phone again, you need to enter the correct lock code. To turn off
the autolock period, select None.
Lock if SIM card changed—to set the phone to prompt for the lock code when an
unknown, new SIM card is inserted into your phone.
Closed user group (network service)—to specify a group of people whom you can
call and who can call you. For more information, contact your service provider. To
activate the default group agreed on with the service provider, select Default. If
you want to use another group (you need to know the group index number), select
On.
Confirm SIM services (network service)—to set the phone to display confirmation
messages when you use a SIM card service
Certificate management
49
DRAFT
A list of authority certificates that have been stored in your phone is displayed in
Certificate management. To see a list of personal certificates if available,
scroll right.
Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be used
correctly in order to benefit from increased security. The existence of a certificate
does not offer any protection by itself; the certificate manager must contain
correct, authentic, or trusted certificates for increased security to be available.
Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not
valid yet" is shown even if the certificate should be valid, check that the current
date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
View certificate details and check authenticity
You can only be sure of the correct identity of a server when the signature and the
period of validity of a server certificate have been checked.
To check certificate details, scroll to a certificate, and select Options > Certificate
details.
Change the trust settings
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
Scroll to an authority certificate, and select Options > Trust settings. Depending
on the certificate, a list of the applications that can use the selected certificate is
shown.
Security module
View or edit security modules.
Factory settings
Reset some of the settings to their original values. You need the lock code. See
Lock code p. 8.
Positioning
With the positioning service you can receive information from service providers
about local issues such as weather and traffic conditions, based on the location of
your device (network service).
50
DRAFT
To enable a positioning method, select Positioning methods, scroll to the
positioning method, and select Options > Enable. To stop using it, select
Options > Disable.
To define the positioning server access point, select Positioning server > Access
point and the desired access point. Then select Server address, and enter the
domain name or URL address of the server.
Phone
Select Menu > Settings > Phone sett. > Phone and Call, Call divert, Call barring, or
Network.
Call
Send my caller ID (network service)—to set your phone number to be displayed
(Yes) or hidden (No) from the person whom you are calling. The value may be set
by your service provider when you subscribe to the service (Set by network).
Call waiting (network service)—to set the network to notify you of a new incoming
call while you have a call in progress. To request the network to activate call
waiting, select Activate. To request the network to deactivate call waiting, select
Cancel. To check whether the function is active, select Check status.
Reject call with SMS—to enable rejecting phone calls with a text message. See
Answer or reject a call p. 20.
Message text—to enter a text to be sent when you reject a call with a text
message
Image in video call—to select a still image to be shown instead of the video when
you deny video sending in a video call
Automatic redial—to set the phone to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt. Press the end key to stop
automatic redialing.
Show call duration—to set the phone to display the call duration during a call
Summary after call—to set the phone to briefly display the approximate duration
of the last call
Speed dialling > On—to set the phone to dial the numbers assigned to the speed
dialing keys, 2 to 9, by pressing and holding the corresponding number key
Anykey answer > On—to answer an incoming call by briefly pressing any key,
except the right selection key, volume keys, and the end key
51
DRAFT
Line in use (network service)—shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you
want to use for making calls and sending short messages.
Calls on both lines can be answered irrespective of the selected line. You cannot
make calls if you select Line 2 and have not subscribed to this network service. To
prevent line selection, select Line change > Disable if supported by your SIM card.
To change this setting, you need the PIN2 code.
Call divert
Call divert is a network service.
1. Select which calls you want to divert: Voice calls, Data and video calls, or Fax
calls.
2. For example, to divert voice calls when your number is busy or when you reject
an incoming call, select If busy.
3. To set the divert option on or off, select Options > Activate or Cancel. To check
whether the option is activated, select Check status.
Call barring and call diverting cannot be active at the same time.
Call barring
Call barring (network service) allows you to restrict the calls that you make and
receive with your phone. To change the settings, you need the barring password
from your service provider.
Scroll to the desired barring option, and to request the network to set call
restriction on, select Options > Activate. To set the selected call restriction off,
select Cancel. To check whether the calls are barred, select Check status. To
change the barring password, select Edit barring password. To cancel all active call
barrings, select Cancel all barrings.
Call barring and call diverting cannot be active at the same time.
When calls are barred, calls may be possible to certain official emergency numbers.
Network
Network mode—To select which network to use (shown only if supported by the
service provider). If you select Dual mode, the device uses the GSM or UMTS
network automatically, according to the network parameters and the roaming
agreements between the network operators.
Operator selection—To set the phone to search for and select automatically one of
the available networks, select Automatic. To select the desired network manually
52
DRAFT
from a list of networks, select Manual. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks you to select a network
again. The selected network must have a roaming agreement with your home
network, that is, the operator whose SIM card is in your phone.
Cell info display (network service)—To set the phone to indicate when it is used in
a cellular network based on microcellular network (MCN) technology and to
activate cell info reception, select On.
Connection
Select Menu > Settings > Phone sett. > Connection >
•Bluetooth—to switch Bluetooth on or off, and edit Bluetooth settings. See
Bluetooth connection p. 57.
•USB—to edit USB settings. See USB data cable p. 59.
•Access points—To establish a data connection, an access point is required. You
can define access points for MMS to send and receive multimedia messages;
for WAP to view web pages; and for internet access point (IAP) to send and
receive e-mail.
Check with your service provider for the type of access point you need. For
availability and subscription to data connection services, contact your service
provider.
You may receive access point settings in a message from your service provider,
or you may have preset access point settings in your phone.
•Packet data—to select the packet data connection settings. The packet data
settings affect all access points using a packet data connection.
Select Packet data connection > When available to set the phone to register to
the packet data network when you are in a network that supports packet data.
If you select When needed, the phone uses a packet data connection only if you
start an application or function that needs it.
Select Access point to set the access point name to use your phone as a modem
with your computer.
•Data call—to set the online time for the data call connection. The data call
settings affect all access points that use a GSM data call.
•SIP settings—to view and edit session initiation protocol (SIP) profiles.
•Configurations—to view and delete configurations. Certain functions, such as
web browsing and multimedia messaging, may require configuration settings.
53
DRAFT
You may receive the settings from your service provider. See Configuration
settings p. 13.
•APN control—to restrict the use of packet data access points. This setting is
only available if your SIM card supports the service. To change the settings, you
need the PIN2 code.
Applications
To view and edit settings of applications installed to your phone, select Menu >
Settings > Phone sett. > Applications.
14. Data management
■Data manager
Application manager
You can install two types of applications and software to your phone:
J2METM applications based on JavaTM technology with the extension .jad
or .jar. PersonalJavaTM applications cannot be installed on your phone.
Other applications and software suitable for the Symbian operating
system. The installation files have the .sis extension. Only install software
specifically designed for your phone.
To open App. manager, select Menu > Settings > Data mgr. > App. mgr..
Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the Java
VerifiedTM testing.
Before installation, in App. manager, scroll to the installation file, and select
Options > View details to view information such as the application type, version
number, and the supplier or manufacturer of the application.
To install an application or software package, scroll to an installation file, and
select Options > Install. Applications on the memory card are indicated with .
To remove an application, in App. manager, scroll to the software package, and
select Options > Remove.
54
DRAFT
Application settings
Select Menu > Tools > App. mgr. > Options > Settings and from the following
settings:
Software installation — to select if you want to allow installation of all Symbian
applications (All) or only signed applications (Signed only)
Online certif. check — to select if you want App. manager to check the online
certificates for an application before installing it
Default web address — default address used when checking online certificates
Some Java applications may require a phone call, a message to be sent, or a
network connection to be made to a specific access point for downloading extra
data or components. In the App. manager main view, scroll to an application, and
select Options > Suite settings to change the settings related to that specific
application.
Memory card
Keep all memory cards out of the reach of small children.
Select Menu > Settings > Data mgr. > Memory.
For details on inserting a memory card into the phone, see Get started p. 10.
Format memory card
When a memory card is formatted, all data on the card is permanently lost.
To format a new memory card, select Options > Format memory card > Yes. When
the formatting is complete, enter a name for the memory card.
Backup and restore information
To back up information from phone memory to the memory card, select Options >
Back up phone memory.
To restore information from the memory card to the phone memory, select
Options > Restore from card.
You can only back up the phone memory and restore it to the same phone.
Lock and unlock the memory card
To set a password to help prevent unauthorized use, select Options > Set
password. You are asked to enter and confirm your password. The password can be
up to eight characters long.
55
DRAFT
If you insert another password-protected memory card into your phone, you are
prompted to enter the password of the card. To unlock the card, select Options >
Unlock memory card.
Check memory consumption
To check the memory consumption and the amount of memory available on your
memory card, select Options > Memory details.
File manager
To see a list of the folders in the phone memory, select Menu > Settings > Data
mgr. > File mgr.. Scroll right to see the folders on the memory card.
To check memory consumption of the current memory, select Options > Memory
details. If the phone memory is getting low, remove some files, or move them to
the memory card.
Device manager
To open the device manager, select Menu > Settings > Data mgr. > Device mgr..
To connect to a server and receive configuration settings for your phone, scroll to
the server profile, and select Options > Start configuration.
To edit a server profile, select Options > Edit profile and from the following
settings:
Allow configuration—To receive configuration settings from the server, select Yes.
Auto-accept all requests —If you want the phone to ask for confirmation before
accepting a configuration from the server, select No.
Contact your service provider, or company information management department
for the other server profile settings.
Update software
To check the current version of the software and if the software has been updated,
select Menu > Settings > Data mgr. > Device mgr. > Updates.
To install a new software version, you must download an update package.
Contact your service provider or company information management department
for the other server profile settings.
Activation keys
Digital rights management
56
DRAFT
Content owners may use different types of digital rights management (DRM) technologies
to protect their intellectual property, including copyrights. This device uses various types of
DRM software to access DRM-protected content. With this device you can access content
protected with WMDRM 10, OMA DRM 2.0 and OMA DRM 1.0. If certain DRM software fails
to protect the content, content owners may ask that such DRM software's ability to access
new DRM-protected content be revoked. Revocation may also prevent renewal of such
DRM-protected content already in your device. Revocation of such DRM software does not
affect the use of content protected with other types of DRM or the use of non-DRM-
protected content.
Digital rights management (DRM) protected content comes with an associated activation
key that defines your rights to use the content.
If your device has OMA DRM protected content, to back up both the activation keys and the
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer
the activation keys which need to be restored with the content for you to be able to
continue the use of OMA DRM protected content after the device memory is formatted. You
may also need to restore the activation keys in case the files on your device get corrupted.
If your device has WMDRM protected content, both the activation keys and the content will
be lost if the device memory is formatted. You may also lose the activation keys and the
content in case the files on your device get corrupted. Losing the activation keys or the
content may limit your ability to use the same content on your device again. For more
information, contact your service provider.
Some activation keys may be connected to a specific SIM card, and the protected content
can be accessed only if the SIM card is inserted in the device.
Select Menu > Settings > Data mgr. > Actv. keys to view the digital rights
activation keys saved in your phone.
To view valid keys ( ) that are connected to one or more media files, s elect Valid
keys. Group keys, which contain several keys, are indicated with . To view the
keys contained in the group key, select the group key.
To view invalid keys ( ) with which the time period for using the file is exceeded,
select Invalid keys. To buy more usage time or extend the usage period for a media
file, scroll to a key, and select Options > Get activation key. It may not be possible
to update activation keys if web service message reception is disabled. To enable
the service message reception, select Menu > Messaging > Options > Settings >
Service message > Service messages > On.
To view activation keys that are not in use, select Not in use. Unused activation
keys have no media files connected to them.
57
DRAFT
To view detailed information such as the validity status and the ability to send the
file, scroll to an activation key, and select it.
15. Connectivity
■PC Suite
With PC Suite you can synchronize contacts, calendar and to-do notes and notes
between your phone and a compatible PC.
You may find more information about PC Suite and the download link in the
support area on the Nokia website, www.nokia.com/pcsuite.
■Bluetooth connection
Bluetooth technology enables wireless connections between electronic devices
within a maximum range of 10 meters (33 feet).
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles:
Dial Up Networking, Serial Port, File Transfer, Handsfree, Headset, Basic Imaging, SIM
Access, Generic Access, and Advanced Audio Distribution. To ensure interoperability
between other devices supporting Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other devices to determine their
compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations. Check with your
local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background
while using other features, increase the demand on battery power and reduce the battery
life.
Bluetooth connection settings
Select Menu > Settings > Connectivity > Bluetooth.
Bluetooth—to switch Bluetooth on or off.
My phone's visibility—to allow your phone to be found by other Bluetooth devices
at all times or for a defined time period. For security reasons it is advisable to use
the Hidden setting whenever possible.
Remote SIM mode > On—to enable the usage of the SIM card of the phone by
another device
58
DRAFT
When the wireless device is in the remote SIM mode, you can only use a compatible
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers programmed into your device, while in
this mode. To make calls from your device, you must first leave the remote SIM mode. If the
device has been locked, enter the lock code to unlock it first.
Send data
There can be only one active Bluetooth connection at a time.
1. Open an application where the item you wish to send is saved.
2. Scroll to the item you want to send, and select Options > Send > Via
Bluetooth.
3. The phone starts to search for devices within range. Paired devices are shown
with .
When searching for devices, some devices may show only the unique device
addresses. To find out the unique address of your phone, enter the code
*#2820# in the standby mode.
If you have searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select More devices.
4. Select the device with which you want to connect.
5. If the other device requires pairing, enter a passcode (1-16 digits) and agree
with the owner of the other device to use the same code.
Data received using Bluetooth connection can be found in Inbox in Messaging.
Paired devices view
In the Bluetooth main view, scroll right to open a list of paired devices.
Do not accept Bluetooth connections from sources you do not trust.
To pair with a device, select Options > New paired device. Select the device with
which to pair. Exchange passcodes.
To cancel pairing, scroll to the device whose pairing you want to cancel, and press
the clear key.
To set a device to be authorized ( ) and automatically allow connections
between your phone and the device without accepting the connection, scroll to
the device, and select Options > Set as authorised. Use this status only for devices
you own or devices that belong to someone you trust. To disallow automatic
connections, select Set as unauthorised.
59
DRAFT
Receive data
When you receive data using Bluetooth technology, a tone sounds, and you are
asked if you want to accept the message. If you accept, the item is placed in Inbox
in Messaging.
■USB data cable
Select Menu > Settings > Connectivity > USB. To select the default USB
connection mode, select USB mode and the desired mode, PC Suite, Media player
or Data transfer. To have the device ask the purpose of the connection each time
the cable is connected, select Ask on connection > Yes.
After transferring data, ensure that it is safe to unplug the USB data cable from
the PC.
■Data transfer
With data transfer you can copy or synchronize contacts, calendar entries, and
possibly other data, such as video clips and images, from a compatible phone
using a Bluetooth connection.
Depending on the other phone, synchronization may not be possible and data can
be copied only once.
To transfer or synchronize data, do the following:
1. Select Menu > Settings > Connectivity > Transfer. If you have not used
Transfer before, information about the application is displayed. Select
Continue to start transferring data.
If you have used Transfer, select Transfer data.
2. When using Bluetooth, the phones need to be paired in order to transfer data.
Depending on the type of the other phone, an application may be sent and
installed on the other phone to enable the data transfer.
3. Select what content you want to be transferred to your phone.
60
DRAFT
16. Battery information
■Charging and discharging
Your device is powered by a rechargeable battery. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. When the talk and standby
times are noticeably shorter than normal, replace the battery. Use only Nokia approved
batteries, and recharge your battery only with Nokia approved chargers designated for this
device.
The full performance of a new battery is achieved only after two or three complete charge
and discharge cycles.
If a replacement battery is being used for the first time or if the battery has not been used
for a prolonged period, it may be necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device when not in use. Do not leave a
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If
left unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take several minutes before the charging
indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery that is
damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct connection of the positive (+) and
negative (—) terminals of the battery. (These look like metal strips on the battery.) This might
happen, for example, when you carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter
conditions, will reduce the capacity and lifetime of the battery. Always try to keep the
battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not
work temporarily, even when the battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Do not dismantle or shred cells or batteries. In the event of a battery leak, do not allow the
liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or
eyes immediately with water, or seek medical help.
61
DRAFT
■Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original
Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging, and inspect the hologram label using the following
steps:
Successful completion of the four steps is not a total assurance of the authenticity of the
battery. If you have any reason to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia
service point or dealer for assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be verified, return the battery to
the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you should see the
Nokia connecting hands symbol from one angle and the Nokia
Original Enhancements logo when looking from another angle.
2. When you angle the hologram left, right, down, and up, you
should see 1, 2, 3, and 4 dots on each side respectively.
3. Scratch the side of the label to reveal a 20-digit code, for
example, 12345678919876543210. Turn the battery so that the
numbers are facing upwards. The 20-digit code reads starting
from the number at the top row followed by the bottom row.
4. Confirm that the 20-digit code is valid by following the
instructions at www.nokia.com/batterycheck.
What if your battery is not authentic?
62
DRAFT
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic
Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service
point or dealer for assistance. The use of a battery that is not approved by the manufacturer
may be dangerous and may result in poor performance and damage to your device and its
enhancements. It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
63
DRAFT
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with
care. The following suggestions will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, remove
the battery, and allow the device to dry completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards
and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and
light sensor lenses.
• Use only the supplied or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the device and may violate regulations
governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as contacts and calendar notes.
• To reset the device from time to time for optimum performance, power off the device
and remove the battery.
These suggestions apply equally to your device, battery, charger, or any enhancement. If any
device is not working properly, take it to the nearest authorized service facility for service.
64
DRAFT
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging
reminds you that in the European Union all electrical and electronic products,
batteries, and accumulators must be taken to separate collection at the end of their
working life. Do not dispose of these products as unsorted municipal waste.
Return the products to collection to prevent possible harm to the environment or
human health from uncontrolled waste disposal and to promote the sustainable
reuse of material resources. Collection information is available from the product
retailer, local waste authorities, national producer responsibility organizations, or
your local Nokia representative. For more information, see product Eco-Declaration
or country-specific information at www.nokia.com.
65
DRAFT
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.
■Operating environment
This device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain
metal and should position the device the above-stated distance from your body.To transmit
data files or messages, this device requires a quality connection to the network. In some
cases, transmission of data files or messages may be delayed until such a connection is
available. Ensure the above separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic storage media near the device, because information
stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately shielded from
external RF energy or if you have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of
15.3 centimeters (6 inches) should be maintained between a wireless device and an
implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to
avoid potential interference with the medical device. Persons who have such devices should:
• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical
device when the wireless device is turned on.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical device to minimize the potential
for interference.
• Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
66
DRAFT
• Read and follow the directions from the manufacturer of their implanted medical device.
If you have any questions about using your wireless device with an implanted medical
device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference occurs,
consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag systems. For more
information, check with the manufacturer, or its representative, of your vehicle or any
equipment that has been added.
Only qualified personnel should service the device or install the device in a vehicle. Faulty
installation or service may be dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with great force. Do not place objects,
including installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device before
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey
all signs and instructions. Potentially explosive atmospheres include areas where you would
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Switch off the device at refueling
points such as near gas pumps at service stations. Observe restrictions on the use of radio
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas
where the air contains chemicals or particles such as grain, dust, or metal powders.
67
DRAFT
■Emergency calls
Important: Wireless phones, including this device, operate using radio signals,
wireless networks, landline networks, and user-programmed functions. Because of
this, connections in all conditions cannot be guaranteed. You should never rely
solely on any wireless device for essential communications like medical
emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the device.
2. Press the end key as many times as needed to clear the display and ready the device for
calls.
3. Enter the official emergency number for your present location. Emergency numbers vary
by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before you can
make an emergency call. If the device is in the offline profile mode, you may need to change
the profile to activate the phone function before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately as
possible. Your wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■Certification information (SAR)
THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by international guidelines. These guidelines
were developed by the independent scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using
standard operating positions with the device transmitting at its highest certified power level
in all tested frequency bands. The actual SAR level of an operating device can be below the
maximum value because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how close you are
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the
device at the ear is 1.18 W/kg.
68
DRAFT
Use of device accessories and enhancements may result in different SAR values. SAR values
may vary depending on national reporting and testing requirements and the network band.
Additional SAR information may be provided under product information at www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA) and Industry Canada. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certification for use at the ear is 1.22 W/
kg and when properly worn on the body is 1.13 W/kg. Information about this device model
can be found at http://www.fcc.gov/oet/fccid by searching the equipment authorization
system using FCC ID: LJPRM-308.
69
DRAFT
Index
A
access codes
barring password 9
change 48
lock code 9, 12
module PIN 9
PIN 9, 12
PIN2 9
PUK 9
PUK2 9
signing PIN 9
UPIN 9
UPUK 9
access points 52
active standby 14
Adobe Reader 41
alarm clock. See clock.
B
battery
charging 12
Bluetooth
connection settings 57
paired devices 58
receiving data 59
sending data 58
browser. See web.
C
cache 38
calendar 41
call register. See log.
calls
answering 20
barring 51
conference call 20
diverting 51
ending 18
international 18
making 18
options during a call 20
rejecting 20
speed dial 19
swapping 21
voice dial 19
voice mailbox 19
waiting 21
camera 34
certificates 48
clock 40
connectivity 57
contacts 29
D
data cable 59
data connection indicators 15
data transfer 59
digital rights management. See activation
keys.
E
e-mail
mailbox 26
e-mail messages
deleting 27
enhancements 47
G
GPS
maps 45
GPS data 44
H
help 16
I
indicators 15
K
keyguard. See keypad lock.
keypad lock 17
L
log 23
M
memory consumption 16
menu 16
message settings
e-mail 29
70
DRAFT
multimedia settings 28
text messages 27
messages
audio 25
listening to 29
organizing 26
outbox 25
receiving 25
sending 25
SIM messages 27
writing 25
mobile browser. See web.
music player
library 34
listening to music 35
N
network 51
O
office applications 42
one-touch dial. See speed dial.
P
phonebook. See contacts.
profiles 30
Q
Quickoffice 42
S
services. See web.
settings
connection 52
data call 52
date 47
enhancements 47
packet data 52
phone 46
phone language 47
predictive text input 47
security 48
time 47
writing language 47
SIM card
using phone without a SIM card 14
speed dial
calling 19
standby mode 14
T
text input 24, 47
copying text 24
predictive 24
themes 30
U
USB. See data cable.
V
video call 21
Visual Radio 35
voice commands 46
volume 17
W
web
browser settings 39
browsing 37
connecting 36
connection security 37
disconnecting 38
saving a page 38
settings 36
viewing a saved page 38
viewing bookmarks 37
writing text. See text input.