Microsoft RM-31 GSM 850/ 1800/ 1900 Phone User Manual Manual

Microsoft Mobile Oy GSM 850/ 1800/ 1900 Phone Manual

Manual

Download:
Mirror Download [FCC.gov]
Document ID	494161
Application ID	thAFvLXZrIMEFQn4VjQnAw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	132.58kB (1657190 bits)
Date Submitted	2004-12-05 00:00:00
Date Available	2004-12-05 00:00:00
Creation Date	2004-11-26 15:27:39
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-11-26 15:27:39
Document Title	Manual
Document Creator	FrameMaker+SGML 5.5.6p145

Nokia 6020b user guide
EN 9236467
Issue 1
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product RM-31 is in
conformity with the provisions of the following Council Directive: 1999/5/EC.
A copy of the Declaration of Conformity can be found from
http://www.nokia.com/phones/declaration_of_conformity/.
Copyright © 2004 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned herein may
be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C)
1997-2004. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4
VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A)
DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE
FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND
(ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND
SEPARATELY LICENSED BY MPEG LA, L.L.C.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
EN 9236467/Issue 1
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TOREVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software that may only be exported in
accordance with the U. S. Export Administration regulations. Diversion contrary to U.S. or
Canadian law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.
Manufactured or sold under one or more following US Patents.
Asterisk (*) indicates design patents pending.
RE32,580
4558302
4868846
4945633
4969192
5001372
5101175
5151946
5173927
5212834
5230091
5241583
5311151
5317283
5331638
5335362
5353328
5371481
5378935
5384782
5396657
5400949
5416435
5442521
5446364
5479476
5526366
5553125
5557639
5565821
5570369
5581244
5600708
5625274
5677620
5692032
5729541
5760568
5794142
5802465
5809413
5818437
5827082
5839101
5844884
5845219
5870683
5884103
5889770
5907823
5912570
5914690
5914796
5917868
5920826
5953541
5956332
5956625
5956633
5966378
5977887
5987137
5991857
6006114
6011554
6011853
6014551
6014573
6026161
6035189
6038238
6043760
6047196
6049796
6050415
6055439
6060193
6069923
6072787
6081732
6084920
6084962
6094587
6097964
6105784
6112099
6115617
6119180
6121846
6128509
6138091
6140966
6144243
6144676
6148209
6151485
6151507
6163609
6164547
6167248
6185295
6188909
6249584
6259312
6266330
6272361
6282436
6292668
6295286
6311054
6314166
6324389
6324412
6347218
6363259
6370362
6370389
6377820
6381468
6392660
6400958
6453179
6463278
6470470
6487397
6522670
6198928
4969192
5266782
5390223
5444816
5487084
5640395
5664053
5699482
5701392
5722074
5754976
5805301
5835889
5857151
5859843
5862178
5898925
5930233
5946651
5960354
5960389
5963901
6005857
6011971
6031827
6118775
6128322
6137789
6167248
6285888
6356759
6377803
6430163
6438370
6456237
6170073
6178535
6195338
6199035
6240076
6266321
Contents
FOR YOUR SAFETY................... 8
General information .............. 10
About your device ............................... 10
Overview of the functions
of the phone ......................................... 10
Shared memory................................. 11
Nokia PC Suite software.................... 11
Access codes ......................................... 11
Security code (5 to 10 digits) ....... 11
PIN and PIN2 codes (4 to 8 digits),
module PIN, and signing PIN ........ 12
PUK and PUK2 codes (8 digits) .... 12
Barring password (4 digits) ........... 12
Wallet code (4 to 10 digits) .......... 12
Network services.................................. 13
Configuration settings service ..... 13
Downloading content and
applications........................................... 14
Nokia support on the Web................ 14
1. Getting started................... 15
Installing the SIM card and the battery
15
Charging the battery .......................... 16
Switching the phone on and off ..... 17
Normal operating position................ 18
Putting on a wrist strap..................... 18
2. Your phone ......................... 19
Keys and connectors........................... 19
Standby mode....................................... 20
Wallpaper ........................................... 21
Screen saver....................................... 21
Power saving ..................................... 21
Essential indicators.......................... 21
Keypad lock (Keyguard) ..................... 22
3. Call functions ..................... 23
Making a call ........................................
Speed dialling a phone number ...
Answering or rejecting
an incoming call ..................................
Call waiting .......................................
Options during a call ..........................
Writing text...........................................
Setting predictive text input
on or off..............................................
Using predictive text input ...........
Using traditional text input ..........
Tips for writing text ........................
23
23
24
24
24
24
25
25
26
26
4. Using the menu .................. 28
Accessing a menu function .............. 28
List of menu functions ....................... 29
5. Menu functions .................. 33
Messages................................................ 33
Text messages (SMS) ...................... 33
Multimedia messages (MMS) ....... 36
Flash messages ................................. 39
Instant messages (Chat)................. 40
E-mail application ........................... 45
Voice messages................................. 47
Info messages ................................... 47
Service commands........................... 47
Deleting all messages
from a folder ..................................... 47
Message settings.............................. 48
Message counter.............................. 50
Call register........................................... 51
Recent calls lists............................... 51
Counters and timers for calls, data
and messages .................................... 52
Positioning information ................. 52
Contacts ................................................. 52
Selecting settings for contacts .... 53
Saving names and phone numbers
(Add contact) .................................... 53
Saving multiple numbers
or items per name ........................... 53
Adding an image to a name or
number in contacts......................... 54
Searching for a contact................. 54
Editing or deleting details............. 55
My presence...................................... 55
Subscribed names............................ 57
Copying contacts............................. 59
Sending and receiving a
business card .................................... 59
Speed dials ........................................ 60
Voice dialling .................................... 60
Service numbers............................... 61
My numbers ...................................... 61
Caller groups..................................... 61
Settings................................................. 62
Profiles................................................ 62
Themes................................................ 63
Tone settings..................................... 63
Personal shortcuts........................... 63
Display settings................................ 64
Time and date settings................... 65
Call settings ...................................... 65
Phone settings.................................. 66
Connectivity...................................... 67
Enhancement settings.................... 69
Configuration settings ................... 70
Security settings .............................. 71
Restore factory settings................. 72
Operator menu..................................... 72
Gallery .................................................... 72
Media...................................................... 73
Camera ............................................... 73
Voice recorder................................... 75
Push to talk........................................... 75
Push to talk menu ........................... 76
Connecting to and disconnecting
from the push to talk service....... 77
Callback requests............................. 77
Making and receiving a
push to talk call ............................... 78
Adding one-to-one contacts........ 80
Creating and setting up groups... 80
Settings for push to talk................ 82
Organiser ............................................... 83
Alarm clock ....................................... 83
Calendar ............................................. 83
To-do list............................................ 84
Notes................................................... 85
Wallet ................................................. 85
Synchronisation ............................... 88
Applications.......................................... 89
Games and applications ................ 89
Calculator .......................................... 91
Countdown timer ............................ 91
Stopwatch ......................................... 92
Web......................................................... 93
Basic steps for accessing
and using services ........................... 93
Setting up the phone
for a service....................................... 93
Making a connection to a service 94
Browsing the pages of a service . 94
Disconnect from a service............. 95
Appearance settings
of the browser .................................. 95
Cookies ............................................... 96
Bookmarks ......................................... 96
Downloading..................................... 97
Service inbox .................................... 97
Cache memory.................................. 98
Browser security .............................. 98
SIM services........................................ 101
6. PC Connectivity................ 102
PC Suite ............................................... 102
(E)GPRS, HSCSD and CSD............ 103
Using data communication
applications ........................................ 104
7. Battery information ......... 105
Charging and Discharging .............. 105
8. Technical Information...... 106
CARE AND MAINTENANCE . 107
ADDITIONAL SAFETY
INFORMATION...................... 108
APPENDIX ............................ 112
A message from the CTIA ............... 112
A message from the U.S. Food
and Drug Administration to
all users of mobile phones ............. 115
FOR YOUR SAFETY
FOR YOUR SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Don't use the phone at a refuelling point. Don't use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don't use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
FOR YOUR SAFETY
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press
as many
times as needed to clear the display and return to the start screen. Key
in the emergency number, then press
. Give your location. Do not
end the call until given permission to do so.
General information
General information
■ About your device
The wireless device described in this guide is approved for use on the
EGSM 900, GSM 1800 and GSM 1900 network. Contact your service
provider for more information about networks.
When using the features in this device, obey all laws and respect privacy
and legitimate rights of others.
Warning: To use any features in this device, other than the
alarm clock, the device must be switched on. Do not switch the
device on when wireless device use may cause interference or
danger.
Your device and its enhancements may contain small parts. Keep them
out of the reach of small children.
For availability of approved enhancements, please check with your
dealer. When you disconnect the power cord of any enhancement, grasp
and pull the plug, not the cord.
■ Overview of the functions of the phone
The Nokia 6020b phone provides many functions that are practical for
daily use, such as a calendar, a clock, an alarm clock and a built-in
camera. Your phone supports:
• Multimedia messaging, see Multimedia messages (MMS) on page 36.
• Instant messages, see Instant messages (Chat) on page 40.
• Polyphonic sound (MIDI) that consists of several sound components
played at the same time. The phone supports Scalable Polyphonic
MIDI (SP-MIDI) format.
• E-mail, see E-mail application on page 45.
• Audible alerts to check the battery status and the network status via
acoustic signals, see Voice commands on page 64.
• Presence-enhanced contacts, see My presence on page 55.
10
General information
• EDGE (Enhanced Data rates for GSM Evolution), see (E)GPRS on
page 68.
• Push to talk, see Push to talk on page 75.
• Java 2 Micro Edition, J2METM, see Applications on page 89.
• XHTML browser, see Web on page 93.
Shared memory
The following features in this device may share memory: contacts, text
messages, instant messages and SMS e-mail, voice tags, calendar and
notes. Use of one or more of these features may reduce the memory
available for the remaining features sharing memory. For example,
saving many SMS e-mail may use all of the available memory. Your
device may display a message that the memory is full when you try to
use a shared memory feature. In this case, delete some of the
information or entries stored in the shared memory features before
continuing. Some of the features, such as contacts, text messages,
instant messages and SMS e-mail may have a certain amount of
memory specially allotted to them in addition to the memory shared
with other features.
■ Nokia PC Suite software
With the Nokia PC Suite software you can, for example, manage the
photos captured with the phone’s camera and handle ringing tones and
wallpapers. Nokia PC Suite is available on Nokia’s Web site at
www.nokia.com.
■ Access codes
Security code (5 to 10 digits)
The security code helps to protect your phone against unauthorised use.
The pre-set code is 12345. Change the code, and keep the new code
secret and in a safe place separate from your phone. To change the code,
and to set the phone to request the code, see Security settings on
page 71.
11
General information
If you key in an incorrect security code five times in succession, the
phone ignores further entries of the code. Wait for 5 minutes and key in
the code again.
PIN and PIN2 codes (4 to 8 digits), module PIN, and
signing PIN
• The PIN (Personal Identification Number) code, supplied with your
SIM card, helps to protect your SIM card against unauthorised use.
See Security settings on page 71.
• The PIN2 code may be supplied with the SIM card and is required to
access some functions, such as call counters.
• The module PIN is required to access the information in the security
module of your SIM card. See Security module on page 98.
• The signing PIN is required for the digital signature. See Digital
signature on page 100.
PUK and PUK2 codes (8 digits)
The PUK (Personal Unblocking Key) code is required to change a blocked
PIN code. The PUK2 code is required to change a blocked PIN2 code.
Barring password (4 digits)
The barring password is required when using the Call barring service. See
Security settings on page 71.
Wallet code (4 to 10 digits)
The wallet code is required to access the wallet services. For further
information, see Wallet on page 85.
Note: If the codes or passwords are not supplied with the SIM
card, contact your local service provider.
12
General information
■ Network services
To use the phone you must have service from a wireless service provider.
Many of the features in this device depend on features in the wireless
network to function. These Network Services may not be available on all
networks or you may have to make specific arrangements with your
service provider before you can utilize Network Services. Your service
provider may need to give you additional instructions for their use and
explain what charges will apply. Some networks may have limitations
that affect how you can use Network Services. For instance, some
networks may not support all language-dependent characters and
services.
Your service provider may have requested that certain features be
disabled or not activated in your device. If so, they will not appear on
your device menu. Your device may also have been specially configured
for your network provider. This configuration may include changes in
menu names, menu order and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/
IP protocols. Some features of this device, such as multimedia messages,
e-mail application, instant messages, presence service, Java games and
applications and Internet services require network support for these
technologies.
Configuration settings service
To use some of the network services, such as mobile Internet services,
MMS, Instant messages, E-Mail application, or Synchronisation, your
phone needs the correct configuration settings. You may receive the
settings directly as a configuration message and you need to save the
settings on your phone. The service provider may provide a PIN that is
needed to save the settings. For more information on the availability of
the settings, contact your network operator, service provider, nearest
authorised Nokia dealer or visit the support area on the Nokia Web site,
www.nokia.com.
When you have received a configuration message Configuration sett.
received is displayed. To view the received settings, press Show.
13
General information
• To save the received settings, press Save. If the phone asks Enter
settings' PIN:, key in the PIN code for the settings and press OK. Set
these settings as the default or not. For availability of the PIN code,
contact the service provider that supplies the settings.
• To discard the received settings, press Discard.
To view and edit the settings see Configuration settings on page 70.
■ Downloading content and applications
You may be able to download new content (for example images and
video clips) and applications into the phone (network service).
1. Select the download function for example in the Collection and
Gallery menus. To access the download function, see the respective
menu descriptions.
A list of bookmarks is shown. Select More bookmarks if you want to
view the bookmarks available in the Web menu.
2. Select the bookmark of the browser page that you want to access. If
the connection fails, change the active set of connection settings in
the Web menu and try the connection again. Follow the instructions
provided by the service.
For the availability of different services, pricing and tariffs, contact
your network operator and/or the service provider.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
■ Nokia support on the Web
Check www.nokia.com/support or your local Nokia Web site for the
latest version of this guide, additional information, downloads, and
services related to your Nokia product.
14
Getting started
1. Getting started
■ Installing the SIM card and the battery
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or other vendor.
Note: Always switch off the power and disconnect the charger and any
other device before removing the cover. Avoid touching electronic
components while changing the cover. Always store and use the device
with the covers attached.
1. To remove the back cover of the
phone:
Push the back cover release button (1)
and slide the back cover towards the
bottom of the phone (2). When the
back cover is released, take it off the
phone.
2. Remove the
battery by lifting
it as shown.
Insert the SIM
card into the
SIM card holder
until it snaps
into position.
Make sure that the SIM card is properly inserted and that the golden
contact area on the card is facing downwards.
15
Getting started
3. To remove the SIM card press the SIM
card release (1) and slide the SIM card
towards the top of the phone (2).
4. Position the battery with the
contacts aligned to the golden
contacts of the phone. Insert the
battery into the battery slot.
5. Align the back cover on the back of
the phone (1) with a gap above the top
of the back cover of approximately
3 mm. Push the back cover up to the
top of the phone to lock it (2).
■ Charging the battery
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
Check the model number of any charger before use with this device.
This device is intended for use when supplied with power from ACP7and ACP-12 chargers.
16
Getting started
1. Connect the lead from the
charger to the socket on the
bottom of your phone.
2. Connect the charger to an AC
wall socket. If the battery is
completely empty, it may take a
few minutes before the charging
indicator appears on the display
or before any calls can be made.
The charging time depends on the charger and the battery used. For
example, charging a battery with the ACP-12 charger takes
approximately 1 hour and 20 minutes while the phone is in standby
mode.
■ Switching the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key
as shown.
Note that if the phone displays Insert SIM card even
though the SIM card is properly inserted, or SIM
card not supported, contact your network operator
or service provider. Your phone does not support 5Volt SIM cards and the card may need to be
changed.
If the phone asks for a PIN or security code, enter the code supplied with
your SIM card (displayed as ****), and press OK.
See also Access codes on page 11.
17
Getting started
■ Normal operating position
Your phone has an internal antenna.
Use the phone only in its normal
operating position as shown.
Note: As with any other radio
transmitting device, do not touch the
antenna unnecessarily when the
device is switched on. Contact with the
antenna affects call quality and may
cause the device to operate at a higher
power level than otherwise needed.
Avoiding contact with the antenna
area when operating the device optimises the antenna performance and the
battery life.
■ Putting on a wrist strap
The upper left edge of the phone
contains an eyelet for the wrist strap.
Thread the strap as shown in the
picture and tighten it.
18
Your phone
2. Your phone
■ Keys and connectors
1. Power key
2. Earpiece
3. Loudspeaker
4. Volume keys
5. Push to talk (PTT) key
To activate push to talk (if available) or
voice recorder. See Push to talk on
page 75 and Voice recorder on page 75.
6. Left and right Selection keys
, middle selection key
and
The function of these keys depends on the guiding text shown on the
display above the keys. See Standby mode on page 20.
7. 5-way joystick
Enables scrolling through names, phone numbers, menus or settings.
The 5-way joystick is also used to move the cursor up and down, and
left and right when writing text, using the calendar, and in some
game applications. Pressing the joystick also functions as the middle
selection key, and pressing it briefly selects the function shown on
the display above the joystick.
In standby mode, the joystick functions as a shortcut. Move the
joystick right to access push to talk (if available) or the calendar, left
to start writing an SMS message, up to activate the camera and
down to access the list of contacts.
8.
dials a phone number, and answers a call. In standby mode, it
shows the list of the most recently called numbers.
9.
ends an active call. Exits from any function.
10.
and
enter numbers and characters.
are used for various purposes in different functions.
19
Your phone
11.Charger connector
Pop-PortTM connector used, for example, for
headsets and the data cable.
12.PTT key to make a push to talk call (only if
available) or to activate the voice recorder.
13.Infrared (IR) port
14.Camera lens
■ Standby mode
When the phone is ready for use, and you have
not keyed in any characters, the phone is in
standby mode.
1. Shows the name of the network or the operator
logo.
2. Shows the signal strength of the cellular network
at your current location.
3. Shows the battery charge level.
4. The left selection key in standby mode is Go to.
Press Go to to view the functions in your personal shortcut list.
Select a function to activate it. Press Options and select Select 'Go
to' options to view the list of available functions that you can add.
Scroll to the desired function and press Mark to add it to the
shortcut list. To remove a function from the list, press Unmark.
Select Organise 'Go to' options to rearrange the functions on your
personal shortcut list. Select the desired function and press Move,
then select where you want to move the function. See also Go to
options on page 64.
5. The middle selection key in standby mode is Menu.
6. The right selection key in standby mode is Names to access the
Contacts menu or another shortcut to a function you can select. See
Personal shortcuts on page 63. Or the key has an operator-specific
name to access an operator-specific web site.
20
Your phone
Wallpaper
You can set your phone to display a background picture, wallpaper,
when the phone is in standby mode. See Display settings on page 64.
Screen saver
You can set your phone to display a screen saver, when the phone is in
standby mode. See Display settings on page 64.
Power saving
For power saving, a digital clock view overwrites the
display when no phone function has been used for a
certain period of time. Press any key to deactivate the
screen saver. If you have not set the time, 00:00 is
displayed.
Essential indicators
You have received one or several text, picture or multimedia
messages. See Reading and replying to an SMS message or an
SMS e-mail on page 34 or Reading and replying to a multimedia
message on page 38.
The phone has registered a missed call. See Call register on
page 51.
or
Your phone is connected to the instant messaging service and
the availability status is online or offline, respectively. See
Connecting to and disconnect from the instant messaging
service on page 41.
You have received one or several instant messages and you are
connected to the instant messaging service. See Connecting to
and disconnect from the instant messaging service on page 41.
The phone’s keypad is locked. See Keypad lock (Keyguard) on
page 22.
21
Your phone
The phone does not ring for an incoming call or text message
when Incoming call alert is set to Off and Message alert tone is
set to Off. See Tone settings on page 63.
The alarm clock is set to On. See Alarm clock on page 83.
When the (E)GPRS connection mode Always online is selected
and the (E)GPRS service is available, the indicator is shown on
the top left of the display. See (E)GPRS connection on page 68.
When the (E)GPRS connection is established, the indicator is
shown on the top left of the display. See (E)GPRS connection on
page 68 and Browsing the pages of a service on page 94.
The (E)GPRS connection is suspended (on hold), for example if
there is an incoming or outgoing call during the (E)GPRS dial-up
connection.
The loudspeaker has been activated, see Options during a call on
page 24.
Calls are limited to a closed user group. See Security settings on
page 71.
or
A headset, handsfree, loopset or music stand is connected.
Push to talk connection is active or suspended.
■ Keypad lock (Keyguard)
You can lock the keypad to prevent the keys from being accidentally
pressed.
Press Menu or Unlock and then
within 1.5 seconds to lock or
unlock the keypad. To answer a call when the keyguard is on, press
During a call, the phone can be operated normally. When you end or
reject the call, the keypad will automatically be locked. For Automatic
keyguard, see Phone settings on page 66.
When the keypad lock is on, calls still may be possible to the official emergency
number programmed into your device.
22
Call functions
3. Call functions
■ Making a call
1. Key in the phone number, including the area code. If you key in an
incorrect character, press Clear to delete it.
For international calls, press
twice for the international prefix
(the + character replaces the international access code) and then key
in the country code, the area code without the leading 0, if
necessary, and the phone number.
2. Press
to call the number.
3. Press
to end the call or to cancel the call attempt.
Making a call using the contacts
To search for a name or phone number that you have saved in Contacts,
see Searching for a contact on page 54. Press
to call the number.
Last number redialling
In standby mode, press
once to access the list of up to 20 numbers
you last called or attempted to call. Scroll to the number or name that
you want, and press
to call the number.
Calling your voice mailbox
In standby mode, press and hold
, or press
and
If the phone asks for the voice mailbox number, key it in and press OK.
See also Voice messages on page 47.
Speed dialling a phone number
Assign a phone number to one of the speed-dialling keys, from
to
, see Speed dials on page 60. Call the number in either of the
following ways:
• Press the speed-dialling key that you want and then press
• If Speed dialling is set to on, press and hold a speed-dialling key until
the call is started. See Call settings on page 65.
23
Call functions
■ Answering or rejecting an incoming call
Press
to answer an incoming call and press
to end the call.
Press
to reject an incoming call. If you press Silence, only the
ringing tone is muted. Then either answer or reject the call.
Call waiting
During a call, press
to answer the waiting call. The first call is put on
hold. Press
to end the active call. To activate the Call waiting
function, see Call settings on page 65.
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
Press Options during a call for some of the following options:
Mute or Unmute, Contacts, Menu, Record, Lock keypad, Auto volume on
or Auto volume off, Loudspeaker or Handset, and the network services
Answer and Reject, Hold or Unhold, New call, Send DTMF (to send tone
strings), Swap (to switch between the active call and the call on hold),
Transfer (to connect a call on hold to an active call and disconnect
yourself), Conference (to set up a conference call), Private call (to
discuss privately in a conference call), End call, and End all calls.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
■ Writing text
You can key in text using traditional or predictive text input.
When you are writing text, predictive text input is indicated by
and traditional text input by
at the top left of the display. The
character case is indicated by
, or
. You can change
the character case by pressing
. The number mode is indicated by
, and you can change between the letter and number mode by
pressing and holding
24
Call functions
Setting predictive text input on or off
When writing text, press Options and select Dictionary.
• To set predictive text input on, select a language in the dictionary
options list. Predictive text input is only available for the languages
on the list.
• To revert to traditional text input, select Dictionary off.
Using predictive text input
You can key in any letter with a single key press. Predictive text input is
based on a built-in dictionary to which you can also add new words.
1. Start writing a word using the keys
to
. Press each key
only once for a single letter. The word changes after each keystroke.
Example: To write Nokia when the English dictionary is selected,
press
and
For more instructions on writing text, see Tips for writing text on
page 26.
2. When you have finished writing the word and it is correct, confirm it
by adding a space with
or by moving the joystick up, down, left
or right. Moving the joystick also moves the cursor.
If the word is not correct, press
repeatedly or press Options and
select Matches. When the word that you want appears, confirm it.
If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
press Spell, key in the word (traditional text input is used) and press
Save. When the dictionary becomes full, the new word replaces the
oldest one that was added.
3. Start writing the next word.
Writing compound words
Key in the first part of the word and move the joystick to the right, then
write the last part of the word.
25
Call functions
Using traditional text input
Press a number key,
to
, repeatedly until the desired
character appears. Not all characters available under a number key are
printed on the key. The characters available depend on the language
selected in the Phone language menu, see Phone settings on page 66.
• If the next letter you want is located on the same key as the present
one, wait until the cursor appears, or move the joystick up, down, left
or right and then key in the letter.
• The most common punctuation marks and special characters are
available under the number key
For more instructions on writing text, see Tips for writing text on
page 26.
Tips for writing text
The following functions may also be available for writing text:
• To insert a space, press
• Move the cursor to the left, right, down or up with the joystick.
• To insert a number while in letter mode, press and hold the desired
number key.
• To delete a character to the left of the cursor, press Clear. Press and
hold Clear to delete the characters more quickly. To delete all the
characters at once when writing a message, press Options and select
Clear text.
• To quickly set predictive text input on or off when writing text, press
and hold Options.
• To insert a word when using predictive text input, press Options and
select Insert word. Write the word using traditional text input and
press Save. The word is also added to the dictionary.
• To insert a special character when using traditional text input, press
, or when using predictive text input, press and hold
, or press
Options and select Insert symbol. Select the character and press Use.
26
Call functions
• To insert a smiley when using traditional text input, press
twice,
or when using predictive text input, press and hold
and press
again, or press Options and select Insert smiley. Select a smiley and
press Use.
The following options are available when writing text messages:
• To insert a number while in letter mode, press Options and select
Insert number. Key in the phone number or search for it in Contacts
and press OK.
• To insert a name from Contacts, press Options and select Insert
contact. To insert a phone number or a text item attached to the
name, press Options and select View details.
27
Using the menu
4. Using the menu
The phone offers you an extensive range of functions, which are
grouped into menus.
■ Accessing a menu function
1. To access the menu, press Menu.
2. Use the joystick to scroll through the menu and select, for example,
Settings by pressing Select. To change the menu view, see Menu view
in Display settings on page 64.
3. If the menu contains submenus, select the one that you want, for
example Call settings.
4. If the selected submenu contains further submenus, repeat step 3.
Select the next submenu, for example Anykey answer.
5. Select the setting of your choice.
6. Press Back to return to the previous menu level, and Exit to exit the
menu.
28
Using the menu
■ List of menu functions
• Messages
1. Create message
1. Text message
2. Multimedia msg.
3. Flash message
2. Inbox
3. Outbox
4. Sent items
5. Saved items
1. Text messages
2. Multimedia msgs.
6. Instant messages
1. Login
2. Saved convers.
3. Connect. settings
7. E-mail1
1. Create e-mail
2. Retrieve
3. Disconnect
4. Inbox
5. Other folders
8. Voice messages
1. Listen to voice messages
2. Voice mailbox number
9. Info messages
1. Info service
2. Topics
3. Language
4. Info topics saved
on SIM card
5. Read2
10.Service commands
11.Delete messages
12.Message settings
1. Text messages
2. Multimedia msgs.
3. E-mail messages
4. Other settings
13.Message counter
• Call register
1. Missed calls
2. Received calls
3. Dialled numbers
4. Delete recent call lists
1. All
2. Missed
3. Received
4. Dialled
5. Call duration
1. Last call duration
2. Received calls' duration
3. Dialled calls' duration
4. All calls' duration
5. Clear timers
6. GPRS data counter
1. Data sent in last session
2. Data received in last
session
3. All sent data
4. All received data
5. Clear counters
7. GPRS connection timer
1. Duration of last session
2. Duration of all sessions
3. Clear timers
8. Positioning
1. In some countries this function may not be available.
2. This menu is shown only if any info messages are received.
29
Using the menu
• Contacts
1. Search
2. Add new contact
3. Delete
4. My presence
5. Subscribed names
6. Copy
7. Settings
1. Memory in use
2. Contacts view
3. Memory status
8. Speed dials
9. Voice tags
10.Service numbers1
11.My numbers2
12.Caller groups2
• Operator menu3
• Settings
1. Profiles
1. General
2. Silent
3. Meeting
4. Outdoor
5. My style 1
6. My style 2
2. Themes
1. Select theme
2. Theme downloads
3. Tone settings
1. Incoming call alert
2. Ringing tone
3. Ringing volume
4. Vibrating alert
5. Message alert tone
6. Instant message alert tone
7. Keypad tones
8. Warning tones
9. Alert for
10.Push to talk settings
4. Personal shortcuts
1. Right selection key
2. Select 'Go to' options
3. Organise 'Go to' options
4. Voice commands
5. Display settings
1. Wallpaper
2. Screen saver
3. Colour schemes
4. Menu view
5. Operator logo
6. Time and date settings
1. Clock
2. Date
3. Auto-update of date &
time
1. Shown if supported by your SIM card. For availability, contact your network
operator or service provider.
2. If Info numbers, Service numbers or both are not supported, the number of this
menu item changes accordingly.
3. If this menu is not shown the subsequent menu numbers change accordingly. The
name depends on the network operator.
30
Using the menu
7. Call settings
1. Automatic volume control
2. Call divert
3. Anykey answer
4. Automatic redial
5. Speed dialling
6. Call waiting
7. Summary after call
8. Send my caller ID
9. Line for outgoing calls1
8. Phone settings
1. Phone language
2. Memory status
3. Automatic keyguard
4. Cell info display
5. Welcome note
6. Operator selection
7. Confirm SIM service
actions
8. Help text activation
9. Start-up tone
9. Connectivity
1. Infrared
2. GPRS
10.Enhancement settings2
1. Headset
2. Handsfree
3. Loopset
11.Configuration settings
1. Default configuration
sett.ings
2. Activate default in all
applications
3. Preferred access point
4. Personal configuration
settings
12.Security settings
1. PIN code request
2. Call barring service
3. Fixed dialling
4. Closed user group
5. Security level
6. Access codes
13.Restore factory settings
• Gallery
1. Images
2. Video clips
3. Themes
4. Graphics
5. Tones
6. Recordings
• Media
1. Camera
2. Voice recorder
• Push to talk1
1. Switch PTT on
2. Callback inbox
3. Group list
4. Contacts list
5. Add group
6. PTT Settings
7. Config. Settings
8. Web
1. For availability, contact your network operator or service provider.
2. This menu is shown only if the phone is or has been connected to a compatible
enhancement available for the phone.
31
Using the menu
• Organiser
1. Alarm clock
1. Alarm time
2. Repeat alarm
3. Alarm tone
2. Calendar
3. To-do list
4. Notes
5. Wallet
6. Synchronisation
• Applications
1. Games
1. Select game
2. Game downloads
3. Memory
4. App. settings
2. Collection
1. Select application
2. App. downloads
3. Memory
3. Extras
1. Calculator
2. Countdown timer
3. Stopwatch
• Web
1. Nokia.com
2. Home
3. Bookmarks
4. Download links
1. Tone downloads
2. Graphic downloads
3. Game downloads
4. Video downloads
5. Theme downloads
6. App. downloads
5. Last web addr.
6. Service inbox
7. Settings
1. Configuration settings
2. Appearance settings
3. Security settings
4. Service inbox settings
8. Go to address
9. Clear the cache
• SIM services1
1. Only shown if supported by your SIM card. The name and contents vary
depending on the SIM card.
32
Menu functions
5. Menu functions
■ Messages
The message services can only be used if they are
supported by your network or your service provider and
you have subscribed to them. Also appropriate settings need to be in
place.
To select the font size for reading and writing messages, press Menu,
and select Messages, Message settings, Other settings and Font size.
Note: When sending messages, your phone may display the words
Message sent. This is an indication that the message has been sent by
your device to the message centre number programmed into your
device. This is not an indication that the message has been received at
the intended destination. For more details about messaging services,
check with your service provider. Only devices that offer compatible
features can receive and display messages. The appearance of a
message may vary depending on the receiving device.
Important: Exercise caution opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
Text messages (SMS)
Using the short message service (SMS) your phone can send and receive
multi-part messages, which consist of several ordinary text messages
(network service). Invoicing may be based on the number of ordinary
messages that are required for a multi-part message.
Before you can send a message, you need to save some message
settings. See Settings for text and SMS e-mail messages on page 48.
You can also send and receive text messages that contain pictures. A
picture message can be a multi-part message.
The text messages function uses shared memory, see Shared memory on
page 11.
33
Menu functions
Writing and sending messages
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages will be sent as a series of two or more
messages. Your service provider may charge accordingly. Characters that use
accents or other marks, and characters from some language options like Chinese,
take up more space limiting the number of characters that can be sent in a single
message.
1. Press Menu, and select Messages, Create message and Text message.
2. Key in a message. See Writing text on page 24. To insert text
templates or a picture into the message, see Templates on page 35.
3. To send the message, press Send or
The messages that you have sent will be saved in the Sent items
folder if the setting Save sent messages is set to Yes. See Settings for
text and SMS e-mail messages on page 48. Text messages are
indicated with
4. Enter the recipient’s phone number or search for the phone number
in Contacts. Press OK to send the message.
Options for sending a message
After you have written a message, press Options and select Sending
options. With Send to many you can send the message to several
recipients and to send a message as an SMS e-mail (network service),
select Send as e-mail. With Sending profile you can use a predefined
message profile to send the message. To define a message profile, see
Settings for text and SMS e-mail messages on page 48.
Reading and replying to an SMS message or an SMS e-mail
When you have received a message or an SMS e-mail, the indicator
and the number of new messages followed by messages received are
shown.
The blinking
indicates that the message memory is full. Before you
can receive new messages, delete some of your old messages in the
Inbox folder.
1. Press Show to view the new message, or press Exit to view it later.
34
Menu functions
If more than one message has been received, select the one that you
want to read. An unread text message or SMS e-mail is indicated by
2. While reading a message, press Options and select an option, for
example, to delete, forward or edit the message as a text message or
an SMS e-mail, rename the message you are reading or to move it to
another folder. Select Copy to calendar to copy text at the beginning
of the message to your phone’s calendar as a reminder note for the
current day. Select Message details to view, if available, the sender’s
name and phone number, the message centre used, and the date and
time of receipt. Select Use detail to extract numbers, e-mail
addresses and Web site addresses from the current message.
When reading a picture message, select Save picture to save the
picture in the Templates folder.
3. Select Reply and the message type to reply to a message.
When replying to an SMS e-mail, confirm or edit the e-mail address
and subject first. Then write your reply message.
4. To send the message, press Send, and press OK to send the message
to the displayed number.
Inbox and sent items folders
The phone saves incoming text and multimedia messages in the Inbox
folder. Sent text messages are saved in the Sent items folder.
Templates
Your phone includes text templates, indicated by
templates, indicated by .
, and picture
To access the template list, press Menu, and select Messages, Saved
items, Text messages and Templates.
• To insert a text template into the message or the SMS e-mail that
you are writing or replying to, press Options. Select Use template
and select the template that you want to insert.
• To insert a picture into the text message that you are writing or
replying to, press Options. Select Insert picture and select a picture
to view it. Press Insert to insert the picture into your message. The
35
Menu functions
indicator in the header of the message indicates that a picture
has been attached. The number of characters that you can enter in a
message depends on the size of the picture.
To view the text and the picture together before sending the
message, press Options and select Preview.
Saved items folder and My folders
To organise your messages, you can move some of them to the Saved
items folder, or add new folders for your messages. While reading a
message, press Options. Select Move, scroll to the folder that you want
to move the message to and press Select.
To add or delete a folder, press Menu, and select Messages, Saved items,
Text messages and My folders. To add a folder if you have not saved any
folder, press Add. Otherwise, press Options and select Add folder. To
delete a folder, scroll to the folder that you want to delete, press
Options and select Delete folder.
Multimedia messages (MMS)
A multimedia message can contain text, sound and a picture or a video
clip. The phone supports multimedia messages that are up to 100 KB in
size. If the message contains a picture, the phone scales it down to fit
the display area. The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit, the device may make
it smaller so that it can be sent by MMS.
The multimedia message function uses shared memory, see Shared
memory on page 11.
If Allow multimedia reception is set to Yes or In home network, your
operator or service provider may charge you for every message you
receive. The default setting to receive multimedia messages is generally
on. See Settings for multimedia messages on page 48.
Multimedia messaging supports the following formats:
• Picture: JPEG, GIF, WBMP, BMP and PNG.
36
Menu functions
• Sound: Scalable Polyphonic MIDI (SP-MIDI), AMR audio and
monophonic ringing tones.
• Video clips in 3gp format with SubQCIF and QCIF resolution and AMR
audio.
The phone does not necessarily support all variations of the
aforementioned file formats. If a received message contains any
unsupported elements, they may be replaced with the file name and the
text Object format not supported.
Note that you are not able to receive any multimedia messages if you
have a call in progress, or a game or another Java application running.
Because delivery of multimedia messages can fail for a variety of
reasons, do not rely solely upon them for essential communications.
Writing and sending a multimedia message
To set the settings for multimedia messaging, see Settings for
multimedia messages on page 48. To check availability and to subscribe
to the multimedia messaging service, contact your network operator or
service provider.
Copyright protections may prevent some images, ringing tones and
other content from being copied, modified, transferred or forwarded.
1. Press Menu, and select Messages, Create message and Multimedia
msg..
2. Key in a message. See Writing text on page 24.
• To insert a file in the message, press Options, select Insert and
select the desired option from the Gallery or select Calendar note
or Business card.
To move the text component to the top or bottom of the message,
press Options and select Place text first or Place text last.
• Your phone supports the sending and receiving of multimedia
messages that contain several pages (slides). To insert a slide in
the message, press Options, and select Insert and Slide. Each slide
can contain text, one image and one sound clip.
If the message contains several slides, you can open the desired
one by pressing Options and selecting Previous slide, Next slide or
37
Menu functions
Slide list. To set the interval between the slides, select Slide
timing.
• The following options may also be available: Delete to delete an
image, slide or sound clip from the message, Preview or Save
message. In More options the following options may be available:
Insert contact, Insert number, Message details and Edit subject.
3. To send the message, press Send and select Phone number, Send to email or Send to many.
4. Enter the recipient’s phone number or e-mail address or search for it
in Contacts.
While the multimedia message is being sent,
is displayed and
you can use other functions on the phone. If there is an interruption
while the message is being sent, the phone tries to resend it a few
times. If this fails, the message will remain in the Outbox folder and
you can try to resend it later.
The messages that you have sent will be saved in the Sent items
folder if the setting Save sent messages is set to Yes. See Settings for
multimedia messages on page 48. Multimedia messages are
indicated with
Reading and replying to a multimedia message
When your phone is receiving a multimedia message, t
is displayed.
When the message has been received,
and Multimedia message
received are shown.
1. Press Show to view the message, or press Exit to view it later.
If more than one message has been received, select the one that you
want to read. An unread multimedia message is indicated by
2. Scroll to view the message. Press Options and some of the following
options may be available: Play presentation, View text, Open image,
Open sound clip, Open video clip, Save image, Save sound clip, Save
video clip, Details, Delete message, Reply, Reply to all, Forward to no.,
Forward to e-mail, Forward to many, Edit, Message details.
See also options in Gallery, see Gallery on page 72.
38
Menu functions
Inbox, Outbox, Saved and Sent items folders
The phone saves the received multimedia messages in the Inbox folder.
Multimedia messages that have not yet been sent are moved to the
Outbox folder. The multimedia messages that you wish to send later can
be saved in the Saved items folder. The multimedia messages that have
been sent are saved in the Sent items folder of the Multimedia msgs.
submenu if the setting Save sent messages is set to Yes. See Settings for
multimedia messages on page 48.
Multimedia messages memory full
When you have a new multimedia message waiting and the memory for
the messages is full,
blinks and Multimedia memory full, view
waiting msg. is shown. To view the waiting message, press Show. To
save the message, press Options, select Save message and delete old
messages by first selecting the folder and then the oId message to be
deleted. To discard the waiting message, press Exit and Yes. If you press
No, you can view the message.
Flash messages
Flash messages are text messages that are instantly displayed upon
reception.
Writing a flash message
Press Menu, and select Messages, Create message and Flash message.
Write your message. The maximum length of a flash message is 70
characters. To insert a blinking text into the message, select Insert blink
char. from the options list to set a marker. The text behind the marker
blinks until a second marker is inserted.
Receiving a flash message
A received flash message is not automatically saved. To read the
message, press Read. Press Options and select Use detail to extract
phone numbers, e-mail addresses and website addresses from the
current message. To save the message, press Save and select the folder
in which you want to save the message.
39
Menu functions
Instant messages (Chat)
Instant messaging (Chat) is a way of sending short, simple text
messages that are delivered over TCP/IP protocols to online users
(network service). Your contact list shows you when the contacts on the
list are online and available to participate in an instant messaging
conversation.
Before you can use instant messaging, you need to subscribe to the
service. For availability, charging and subscription to the service,
contact your service provider, from whom you also receive your unique
ID and password and the settings for instant messaging. For required
settings, see Instant messaging settings on page 45. The icons and texts
on the display may vary depending on the instant messaging service.
You can use the other functions of the phone while you have an active
instant messaging session in the background.
Instant messaging uses shared memory, see Shared memory on page 11.
Basic steps for instant messaging
• To enter the instant messaging menu (offline), see Entering the
instant messaging menu on page 41.
• To connect to the service (online), see Connecting to and disconnect
from the instant messaging service on page 41.
• To start a conversation with a contact, see IM contacts in Starting an
instant messaging conversation on page 41.
To create your own contact lists, see Contacts for instant messaging
on page 43.
• To join a public group, see Groups in Starting an instant messaging
conversation on page 41.
To join an instant messaging group via an invitation message, see
Accepting or rejecting an invitation on page 42.
To create your own group, or to join or delete a public group, see
Groups on page 44.
• To edit your own information, see Editing your own settings on
page 43.
40
Menu functions
• To search users and groups, see Search in Starting an instant
messaging conversation on page 41.
• To read a message, see Reading an instant message on page 43.
• To write and send messages during an active session, see
Participating in a conversation on page 43.
• To view, rename or delete saved conversations, select Saved convers.
when you have entered the Instant messages menu.
• To block or unblock contacts, see Blocking and unblocking messages
on page 44.
• To disconnect from the service, see Connecting to and disconnect
from the instant messaging service on page 41.
Entering the instant messaging menu
To enter the Instant messages menu while still offline, press Menu, and
select Messages and Instant messages. Activate a service and select
Login to connect to the service; Saved convers. to view, erase or rename
the conversations that you have saved during a session, or Connect.
settings to access the settings needed for a connection.
Connecting to and disconnect from the instant messaging
service
To connect to the service, enter the Instant messages menu, activate a
service and select Login. Select one of the available sets. If necessary key
in the User ID: and the Password:. When the phone has successfully
connected, Logged in is displayed.
Tip: To set the phone to automatically connect to the instant
messaging service when you enter the Instant messages menu,
connect to the service, select My settings, Automatic login and
On IM start-up.
To disconnect from the service, select Logout.
Starting an instant messaging conversation
Enter the Instant messages menu and connect to a service. You can
select:
41
Menu functions
• Conversations to view the list of new and read messages or
invitations to instant messaging during the active session. Scroll to
the message or invitation that you want and press Open to read the
message.
indicates new and
read instant messages.
indicates new and
read group messages.
indicates invitations.
• IM contacts includes the contacts that you have added. Scroll to the
contact to whom you would like to send instant messages and press
Chat or press Open if a new message is shown in the list.
If you have received a new message from a contact, it is indicated
with
indicates the online and
the offline contacts in the phone’s
contacts memory.
indicates a blocked contact, see Blocking and
unblocking messages on page 44.
• Groups and Public groups. The list of bookmarks to public groups
provided by the service provider is displayed. To start a conversation,
scroll to a group and press Join. Enter the screen name that you want
to use in the conversation. When you have successfully joined in the
group conversation, the phone shows Joined group: and the group
name. To create a private group, see Groups on page 44.
• Search and select Users or Groups to search for other users or public
groups on the network. To start the session when you have found the
user or the group that you want, press Options and select Chat or
Join group.
To start a session from Contacts, see Viewing the subscribed names on
page 58.
Accepting or rejecting an invitation
When you have connected to the service and you receive a new
invitation, New invitation received is displayed. Press Read to read it. If
more than one invitation is received, the number of messages followed
by new invitations received is displayed. Press Read, scroll to an
invitation that you want and press Open. Press Accept, to join the
42
Menu functions
private group conversation, or press Options and select Reject or Delete
to reject or delete the invitation.
Reading an instant message
When you have connected to the service and you receive a message
from a person who is not taking part in the conversation, New instant
message is displayed. Press Read to read it. If more than one message is
received, the number of messages followed by new instant messages is
displayed. Press Read, scroll to a message and press Open.
New messages received during an active session are held in the
Conversations of the Instant messages menu. If the message is from a
person whose contact information is missing from the contact list in IM
contacts, the sender’s ID is shown. If the contact information can be
found in the phone’s memory for contacts and the phone recognises it,
the sender’s name is shown. To save a new contact in the phone’s
memory, press Options and select Save to contacts and enter the name
of the person, or Add to contact.
Participating in a conversation
Join or start a session by pressing Write. Write your message and press
Send or
to send it. If you press Options, some of the following
options are available: View conversation, Save to contacts, Add to
contact, Group members, End conversation, Dictionary.
Editing your own settings
Enter the Instant messages menu and connect to the service. Select My
settings to view and edit your own availability information or screen
name. Select Availability and Available for all or Avail. for contacts (or
Appear offline) to allow all the other users or only the contacts on your
contact list to see that you are online when you have connected to the
service. When you are connected to the service,
indicates that you
are online and
that you are not visible to others.
Contacts for instant messaging
To add contacts to the instant messaging contacts list, connect to the
service and select IM contacts. If the contacts list is empty the phone
displays Contact list empty. Copy contacts from server? to retrieve
43
Menu functions
available contacts from the server. Otherwise press Options and select
Add contact, or if you have no contacts added, press Add. Select Enter ID
manually, Search from serv., From contacts, or Copy from server to add a
new contact. When the contact is added, the phone displays Added to
IM contacts: and the contact name.
Scroll to a contact, and press Chat to start a session or press Options
and select Contact info, Edit name, Block contact (or Unblock contact),
Add contact, Remove contact, Copy to server, or Availability alerts.
Blocking and unblocking messages
Connect to the service and select Conversations or IM contacts.
Highlight the contact in the contacts list from whom you want to block
incoming messages. Press Options, select Block contact and press OK.
To unblock the messages, connect to the service and select Blocked list.
Scroll to the contact from whom you want to unblock the messages and
press Unblock.
Groups
You can create your own private groups for a session, or use the public
groups provided by the service provider. The private groups exist only
during an active session. You can add to a private group only the
contacts that are in your contact list and thus in the phone’s contacts
memory. If the server you are logged onto does not support group
services all group-related menus are dimmed.
Public groups
You can bookmark public groups that your service provider may
maintain. Connect to the service, select Groups and Public groups. Scroll
to a group that you want to chat with and press Join. If you are not in
the group, key in your screen name as your nickname for the group. If
you press Options, you can select Delete group to delete a group from
your group list.
Creating a private group
Connect to the service, select Groups and Create group. Key in the name
for the group and the screen name that you want to use for the group.
You can use another screen name in another group. Mark your private
44
Menu functions
group members from the contacts list and key in an invitation to newly
added members.
Instant messaging settings
You may receive the settings as a configuration message from the
service provider. See Configuration settings service on page 13. To key in
the settings manually, see Configuration settings on page 70. For
instant messaging and presence settings, contact your service provider.
To enter the Instant messages menu while still offline, press Menu, and
select Messages and Instant messages. Activate a service and select
Connect. settings. Select Configuration and select the set you would like
to activate. Select Account and choose the account you want to use.
Select User ID to view or to edit the user ID. Select Password to enter the
password.
E-mail application
The e-mail application allows you to access the compatible e-mail
account that you use in the office or at home, via the phone (network
service). You can write, send, and read e-mail with your phone. Your
phone supports POP3 and IMAP4 e-mail servers.
The e-mail application uses shared memory, see Shared memory on
page 11.
Before you can send and retrieve any e-mail, you may need to do the
following:
• Obtain a new e-mail account or use the current one. For availability
of your e-mail account contact your e-mail service provider.
• For the settings required for the e-mail application, contact your email service provider. To receive the e-mail settings as a
configuration message, see Configuration settings service on
page 13.
• To set the e-mail settings on your phone, press Menu and select
Messages, Message settings and E-mail messages. See Settings for
e-mail application on page 49.
45
Menu functions
Writing and sending an e-mail
1. Press Menu and select Messages, E-mail, and Create e-mail.
2. Key in the recipient’s e-mail address, a subject and the e-mail
message.
3. Press Send and select Send now.
Downloading e-mail from your e-mail account
1. Press Menu and select Messages, E-mail and Retrieve to download
e-mail that have been sent to your e-mail account. Or:
Press Menu and select Messages and E-mail, press Options and
select Retrieve and send to download new e-mail and to send e-mail
that have been saved in the Outbox folder.
2. Your phone attempts to make a connection to the e-mail service. A
status bar is shown while your phone is downloading e-mail to your
phone.
3. Press Select to view the new message in the Inbox, or press Back to
view it later. An unread text message is indicated by
Reading and replying to an e-mail
Press Menu, select Messages, E-mail and Inbox. While reading the
message, press Options to see the options available for this message.
To reply to an e-mail, press Reply and select Original text or Empty
screen. Confirm or edit the e-mail address and subject, then write your
reply. To send the message, press Send and select Send now.
Inbox and Other folders (Drafts, Archive, Outbox and Sent
items)
Your phone saves e-mail that you have downloaded from your e-mail
account in the Inbox folder. Other folders contains the folders: Drafts for
saving unfinished e-mail, Archive for organising and saving your e-mail,
Outbox for saving e-mail that have not been sent, and Sent items for
saving e-mail that have been sent.
Deleting e-mail
To delete e-mail, press Menu and select Messages and E-mail, press
Options and select Delete messages. To delete all messages from a
46
Menu functions
folder, select the folder from which you want to delete the messages
and press Yes. To delete all messages from all folders, select All
messages and press Yes. Note that deleting an e-mail from your phone
does not delete it from the e-mail server.
Voice messages
The voice mailbox is a network service and you may need to subscribe to
it. For more information and for the voice mailbox number, contact your
service provider.
Press Menu, and select Messages and Voice messages. To call your voice
mailbox, select Listen to voice messages. To key in, search for or edit
your voice mailbox number, select Voice mailbox number.
If supported by the network, the indicator
will show new voice
messages. Press Listen to call your voice mailbox number.
Tip: Pressing and holding
have the number set.
calls your voice mailbox if you
Info messages
With the info message network service you may be able to receive
messages on various topics. For details, contact your service provider.
Service commands
Press Menu, and select Messages and Service commands. Key in and
send service requests (also known as USSD commands), such as
activation commands for network services, to your service provider.
Deleting all messages from a folder
To delete all messages from a folder, press Menu, and select Messages
and Delete messages. Select the folder from which you want to delete
the messages and press OK to confirm the query.
If the folder contains unread messages, the phone will ask whether you
want to delete them also.
47
Menu functions
Message settings
The message settings affect the sending, receiving and viewing of
messages.
Settings for text and SMS e-mail messages
Press Menu, and select Messages, Message settings, Text messages.
Select Sending profile. If more than one message profile set is supported
by your SIM card, select the set that you want to change. Each setting
has the following settings: Message centre number (delivered by your
service provider), Messages sent via, Message validity, Default recipient
number (text messages) or E-mail server (e-mail), Delivery reports, Use
GPRS, Reply via same centre (network service) and Rename sending
profile.
Select Save sent messages. Select Yes to set the phone to save sent
multimedia messages in the Sent items folder. If you select No, the sent
messages are not saved.
Settings for multimedia messages
If Allow multimedia reception is set to Yes or In home network, your
operator or service provider may charge you for every message you
receive. The default setting to receive multimedia messages is generally
on.
Press Menu, and select Messages, Message settings and Multimedia
msgs.. Select
• Save sent messages. Select Yes to set the phone to save sent
multimedia messages in the Sent items folder. If you select No, the
sent messages are not saved.
• Delivery reports to ask the network to send delivery reports about
your messages (network service).
• Scale image down to define the image size when you insert the
image into the multimedia message.
• Default slide timing to define the default time for slides in
multimedia messages.
• Allow multimedia reception. Choose No, Yes or In home network to
use the multimedia service. If Allow multimedia reception is set to
48
Menu functions
Yes or In home network, your operator or service provider may charge
you for every message you receive. The default setting to receive
multimedia messages is generally on.
• Incoming multimedia messages. Select Retrieve to automatically
allow the reception of multimedia messages, Retrieve manually to
allow the reception of multimedia message only after being
prompted or Reject to prevent the reception of multimedia
messages.
• Configuration settings. Select Configuration and select the default
service provider for retrieving multimedia messages. Select Account
to see the accounts provided by the service provider. If more than
one account is displayed choose the one that you want to use. You
may receive the settings as a configuration message from the service
provider. See Configuration settings service on page 13. To key in the
settings manually see Configuration settings on page 70.
• Allow adverts to choose if you allow the reception of messages
defined as advertisements. This setting is not shown if Allow
multimedia reception is set to No.
Settings for e-mail application
You may receive the e-mail application settings as a configuration
message from the service provider. See Configuration settings service on
page 13. To key in the settings manually see Configuration settings on
page 70.
Select each of the settings individually and key in all the required
settings. Contact your e-mail service provider for the settings.
Press Menu and select Messages, Message settings, and E-mail
messages. Select
• Configuration and select the set that you would like to activate.
• Account to see the accounts provided by the service provider. If more
than one account is displayed choose the one that you want to use.
• My name. Key in your name or nickname.
• E-mail address. Key in e-mail address.
49
Menu functions
• Include signature. You can define a signature that is automatically
added to the end of your e-mail, when you write your message.
• Reply-to address. Key in the e-mail address to which you want the
replies to be sent.
• SMTP user name. Key in the name that you want to use for outgoing
mails.
• SMTP password. Key in the password that you want to use for
outgoing mails.
• Display terminal window. Select Yes to perform manual user
authentication for Intranet connections.
• Incoming server type. Select either POP3 or IMAP4 depending on the
type of e-mail system that you are using. If both types are supported,
select IMAP4.
• Incoming mail settings
If you have selected POP3 as the incoming server type, the following
options are shown: Retrieve e-mails, POP3 user name, POP3
password and Display terminal window.
If you have selected IMAP4 as the incoming server type, the
following options are shown: Retrieve e-mails, Retrieval method,
IMAP4 user name, IMAP4 password and Display terminal window.
Common settings
Press Menu and select Messages, Message settings, Other settings and
Font size to select the font size for reading and writing messages.
Message counter
To view how many messages you have sent and received, press Menu
and select Messages, Message counter. Select Sent messages or
Received messages or select Clear counters to clear the counters.
50
Menu functions
■ Call register
The phone registers the phone numbers of missed,
received and dialled calls, push to talk addresses of
one-to-one push to talk calls and the approximate
length of your calls.
The phone registers these items only if the network supports these
functions, and the phone is switched on and within the network service
area.
When you press Options in the Missed calls, Received calls and Dialled
numbers menus, you can view the date and the time of the call, edit or
delete the phone number from the list, save the number in Contacts, or
send a message to the number. Select Delete recent call lists to delete
the recent calls lists.
Recent calls lists
Press Menu, and select Call register and then select
• Missed calls to view the list of up to 20 phone numbers from which
somebody has tried to call you (network service). The number in front
of the (name or) phone number indicates the amount of call
attempts from that caller.
Tip: When a note about missed calls is displayed, press List to
access the list of phone numbers. Scroll to the number that
you would like to call back and press
• Received calls to view the list of up to 20 phone numbers from which
you have most recently accepted or rejected calls (network service).
• Dialled numbers to view the list of up to 20 phone numbers that you
have most recently called or attempted to call.
Tip: In standby mode, press
once to access the list of
dialled numbers. Scroll to the number or name that you want,
and press
to call the number.
• Delete recent call lists to delete the recent calls lists. Select whether
you want to delete all the phone numbers in the recent calls lists, or
51
Menu functions
only those numbers in the missed calls, received calls or dialled
numbers lists. You cannot undo this operation.
Counters and timers for calls, data and messages
Note: The actual invoice for calls and services from your service
provider may vary, depending upon network features, rounding off for
billing, taxes and so forth. Some timers may be reset during service or
software upgrades.
Press Menu, and select Call register and then select Call duration, GPRS
data counter or GPRS connection timer for approximate information on
your recent communications.
Positioning information
Some networks allow position requests (network service). Positioning
allows you to view the received position requests from the network
operator. Contact your network operator or service provider to subscribe
to and agree upon the delivery of location information.
Press Menu, and select Call register, Positioning and then Position log to
see a list of received position requests.
■ Contacts
You can save names and phone numbers (Contacts)
in the phone’s memory and in the SIM card’s
memory.
• The phone’s memory may save names with numbers and text notes
about each name. You can also save an image for a certain number
of names. Contacts use shared memory, see Shared memory on
page 11.
• Names and numbers saved in the SIM card’s memory, are indicated
by
In dynamic contacts you can publish your current availability status to
communicate to anyone who has access to this service and who is
requesting this information. See My presence on page 55.
52
Menu functions
Selecting settings for contacts
Press Menu and select Contacts and Settings. Select
• Memory in use to select the SIM card or phone memory to use for
your contacts. To recall names and numbers from both memories for
contacts, select Phone and SIM. In that case, the names and numbers
will be saved in the phone memory.
• Contacts view to select how the names, numbers and images in
contacts are displayed.
• Memory status to view how much memory is available in the
selected memory for contacts.
Saving names and phone numbers (Add contact)
Press Menu and select Contacts and Add new contact. Key in the name
and the phone number. When the name and number are saved, press
Done.
Tip: Quick save In standby mode, key in the phone number and
press Save. Key in the name, press OK and Done.
Saving multiple numbers or items per name
You can save different types of phone numbers and short text items per
name in the phone’s internal memory for contacts.
The first number saved is automatically set as the default number and it
is indicated with a frame around the number type indicator, for example
. When you select a name from contacts, for example to make a call,
the default number is used unless you select another number.
1. Make sure that the memory in use is either Phone or Phone and SIM.
2. Scroll to the name saved in the phone’s internal memory for the
contact to which you want to add a new number or text item, and
press Details.
3. Press Options and select Add number, Add detail or Add image.
4. To add a number or detail, select one of the number types or text
types, respectively, or select an image from Gallery.
53
Menu functions
If you select the text type User ID: select Search to search for an ID by
a mobile phone number or an e-mail address in the server of the
operator or service provider if you have connected to the presence
service. See My presence on page 55. If only one ID is found, it is
automatically saved. Otherwise, to save the ID, press Options, and
select Save. To key in the ID, select Enter ID manually. Key in the ID
and press OK to save it.
To change the number or text type, select Change type in the options
list. Note that you cannot change the type of an ID when it is on the
IM contacts or in the Subscribed names list.
To set the selected number as the default number, select Set as
default.
5. Key in the number or text item and press OK to save it.
6. Press Back and then Exit to return to standby mode.
Adding an image to a name or number in contacts
You can add an image in supported format to a name or number saved in
the phone’s internal memory.
Move the joystick down in standby mode, scroll to the contact that you
want to add an image to and press Details. Press Options and select Add
image. The phone opens the list of folders in the Gallery. Scroll to the
desired image, press Options and select Save to contacts. A copy of the
image is added to the contact.
Searching for a contact
Press Menu and select Contacts and Search, or to quickly find a contact
name, move the joystick down in standby mode. You can key in the first
characters of the name you are searching for in the pop-up window.
In addition the following options in the Contacts menu may also be
available:
• Add new contact and Delete.
• Copy to copy names and phone numbers from the phone´s contact
directory to the SIM card´s memory, or vice versa.
54
Menu functions
• Settings to select how the names and numbers in contacts are
displayed. Select Memory status to view the free and used memory
capacity.
• Speed dials to assign a number to a speed dialling key. To activate
speed dialling see Call settings on page 65.
• Service numbers to call the service numbers of your service provider
if the numbers are included on your SIM card (network service).
• My numbers to view the phone numbers assigned to your SIM card.
Only shown, if the numbers are included on your SIM card.
• Caller groups to arrange the names and phone numbers saved in the
memory into caller groups with different ringing tone.
Editing or deleting details
Search for the contact that you want to edit or delete and press Details.
Scroll to the name, number, text item or image that you want to edit or
delete and press Options.
• To edit a name, number or text item or to change image, select Edit
name, Edit number, Edit detail or Change image.
Note that you cannot edit or delete an ID when it is in IM contacts or
in the Subscribed names list.
• To delete a number or text item, select Delete number or Delete
detail.
• To delete an image attached to the contact, select Delete image.
Deleting an image from contacts does not delete it from Gallery.
My presence
With the presence service (network service) you can share your presence
status with other users, for example your family, friends and colleagues
with compatible devices and access to the service. Presence status
includes your availability, status message and personal logo. Other users
who have access to the service and who are requesting your information
are able to see your status. The requested information is shown in
Subscribed names in the viewer’s Contacts menu. You can personalise
55
Menu functions
the information that you want to share with others and control who can
see your status.
Before you can use presence, you need to subscribe to the service. To
check the availability, for charging details and to subscribe to the
service, contact your service provider, from whom you also receive your
unique ID and password and the settings for the service. To set the
required settings for the presence service, see Instant messaging
settings on page 45. While you have connected to the presence service,
you can use the other functions of the phone, and the presence service
is active in the background.
Press Menu and select Contacts and My presence. Select
• Connect to 'My presence' service (or Disconnect).
• My current presence to change your presence status. Select
• View current presence and select Private pres. or Public pres..
• My availability to set your availability status to Available
indicated by , or to Busy indicated by , or to Not available
indicated by .
• My presence message and key in the text to be shown to other
persons or press Options and select Previous msgs. and select an
old message as the status message.
• My presence logo to select your personal logo from the Graphics
folder in the gallery. If you select the Default, the logo is not
published.
• Show to to select the groups to whom you want to show your
presence status or if not to show it at all.
Select Private and public and contacts in your private list are able
to see all your presence information: availability, status message
and logo. Other contacts can see only your availability.
Select Private viewers and the contacts in your private list can see
all your presence information (availability, status message and
logo). Other users will not see any information.
If you select No one, no one can see your presence information.
• Viewers and select
56
Menu functions
• Current viewers to view all the persons who have subscribed to
your presence information.
• Private list is a list of the persons who are allowed to view all your
presence information, including availability, status message and
logo. You can manage your own private list. Other persons who
are not in the private list, can see only your availability.
• Blocked list to view all the persons you have blocked from
viewing your presence information.
• Settings and select
• Show current presence in idle to show the current status indicator
in standby mode.
• Synchronise with profiles to select whether you want to update
your My presence message and My availability manually or
automatically by linking them to the currently active profile. See
also Profiles on page 62. Note that you cannot link a personalised
status logo to a Profile.
• Connection type to select if the phone connects automatically to
the service when the phone is switched on.
• IM and my presence settings, see Instant messaging settings on
page 45.
Subscribed names
You can create a list of contacts whose presence status information you
want to be aware of. You can view the information if the contacts allow
you to view it and if it is not prevented by the contact or network. You
can view these subscribed names either by scrolling through the
contacts or via the Subscribed names menu.
Ensure that the memory in use is either Phone or Phone and SIM.
To connect to the Presence service, press Menu and select Contacts, My
presence and Connect to 'My presence' service.
57
Menu functions
Adding contacts to the subscribed names
1. Press Menu and select Contacts and Subscribed names. If you have
not connected to the Presence service, the phone asks if you want to
connect now.
2. If you have no contacts on your list, press Add. Otherwise, press
Options and select Subscribe new. The list of your contacts is shown.
3. Select a contact from the list and if the contact has an user ID saved,
the contact is added to the subscribed names list. If there is more
than one ID, select one of them. After subscription of the contact,
Subscription activated is shown.
Viewing the subscribed names
See also Searching for a contact on page 54 to view the presence
information.
1. Press Menu and select Contacts and Subscribed names.
The status information of the first contact on the subscribed names
list is displayed. The information that the person wants to give to
others may include text and some of the following icons:
, or indicate that the person is either available, discreet or
not available.
indicates that the person’s presence information is not available.
2. Press Details to view the details of the selected contact, or press
Options and select
• Subscribe new to add a new contact to the list of subscribed
names.
• Chat to start a conversation.
• Send message to send a text message to the selected contact.
• Send SMS e-mail to send an e-mail to the selected contact.
• Send bus. card to send a business card to the selected contact.
• Unsubscribe to remove the selected contact from the list of
subscribed names.
58
Menu functions
Unsubscribing a contact
• To unsubscribe a contact from the Contacts list, move the joystick
down in standby mode and scroll to the contact that you want to
unsubscribe. Press Details and Details again, select the ID and press
Options. To unsubscribe, select Unsubscribe and press Yes to
confirm.
• To unsubscribe via the Subscribed names menu, see Viewing the
subscribed names on page 58.
Copying contacts
You can copy names and phone numbers from the phone’s memory to
your SIM card’s memory and vice versa. Note that any text items saved
in the phone’s internal memory, such as e-mail addresses, will not be
copied to the SIM card.
Press Menu and select Contacts and Copy. Select the copying direction,
From phone to SIM card or From SIM card to phone.
If you select One by one, scroll to the name that you want to copy and
press Copy.
Default numbers is shown if you copy from the phone to the SIM card.
Only the default numbers will be copied.
To choose whether you want to keep or delete the original names and
numbers, select Keep original or Move original.
If you select All or Default numbers, press Yes when Copy contacts? or
Move contacts? is displayed.
Sending and receiving a business card
You can send and receive a person’s contact information from a
compatible device as a business card. When you have received a (MMS)
business card, press Show (, Play) and Save to save the business card in
the phone’s memory. To discard the business card, press Exit and then
Yes.
To send a business card, search for the name and phone number you
want to send from contacts, press Details and Options and select Send
59
Menu functions
bus. card. Select Via infrared, Via text message (network service) or Via
multimedia (network service).
Speed dials
To assign a number to a speed-dialling key, press Menu and select
Contacts and Speed dials and scroll to the speed-dialling key number
that you want.
Press Assign, or if a number has already been assigned to the key, press
Options and select Change. Press Search, and select first the name and
then the number that you want to assign. If the Speed dialling function
is off, the phone asks whether you want to activate it. See also Speed
dialling in Call settings on page 65.
To make a call using the speed-dialling keys, see Speed dialling a phone
number on page 23.
Voice dialling
You can make a phone call by saying a voice tag that has been added to
a phone number. Any spoken word(s), such as a person’s name(s), can be
a voice tag. You can add up to ten voice tags.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are dependent on the speaker's
voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and use them
in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialling
in all circumstances.
Adding and managing voice tags
Save or copy in the phone’s memory the contacts to which you want to
add a voice tag. You can also add voice tags to the names in the SIM
60
Menu functions
card, but if you replace your SIM card with a new one, you first need to
delete the old voice tags before you can add new ones.
Voice tags use shared memory, see Shared memory on page 11.
1. In standby mode, move the joystick down.
2. Scroll to the contact to which you want to add a voice tag and press
Details. Scroll to the phone number you want and press Options.
3. Select Add voice tag.
4. Press Start, and say clearly the word(s) you want to record as a voice
tag. After recording, the phone plays the recorded tag. A symbol
appears after the phone number with a voice tag.
To check the voice tags, press Menu and select Contacts and Voice tags.
Scroll to the contact with the voice tag that you want, and press Select
to see the options to listen to, delete or change the recorded voice tag.
Making a call by using a voice tag
In standby mode, press and hold the right selection key. A short tone is
heard and Speak now is displayed. Say the voice tag clearly. The phone
plays the recognised voice tag and then dials the phone number of the
voice tag after 1.5 seconds.
Service numbers
Your service provider may have included service numbers in your SIM
card. These menus are only shown if supported by your SIM card.
My numbers
The phone numbers assigned to your SIM card are saved in My numbers
if this is allowed by the card. To view the numbers, press Menu and
select Contacts and My numbers. Scroll to the desired name or number,
and press View.
Caller groups
You can arrange the names and phone numbers saved in Contacts into
caller groups. For each caller group, you can set the phone to sound a
specific ringing tone and show a selected graphic on the display when
61
Menu functions
the phone recognises a call from a phone number in the group. To set
the phone to ring only upon calls from phone numbers belonging to a
selected caller group, see Alert for in Tone settings on page 63.
Press Menu and select Contacts and Caller groups and select the desired
caller group. Select:
• Group name, key in a new name for the caller group and press OK.
• Group ringing tone and select the ringing tone for the group.
• Group logo and select On to set the phone to display the group logo,
Off not to display it, or View to view the logo.
• Group members to add a name to the caller group, press Add. Scroll
to the name you want to add to the group and press Add. To remove
a name from a caller group, scroll to the name that you want to
remove, and press Options and select Remove contact.
■ Settings
Profiles
Your phone has various setting groups, profiles, for
which you can customise the phone tones for different events and
environments. Personalise the profiles to your own liking and activate a
profile to use it. Available profiles are General, Silent, Meeting, Outdoor,
My style 1, and My style 2.
Press Menu, and select Settings and Profiles. Scroll to a profile and press
Select.
• To activate the selected profile, select Activate.
• To personalise the profile, select Personalise. Select the setting you
want to change and make the changes.
• To set the profile to be active until a certain time up to 24 hours,
select Timed and set the time for the profile setting to end. When the
time set for the profile expires, the previous profile that was not
timed becomes active.
62
Menu functions
Tip: To change the profile quickly in standby mode, press the
power key
, scroll to the profile that you want to activate and
press Select.
Themes
A theme is a package that may include a screen saver, a wallpaper
image, a ringing tone and a colour scheme to customise your phone for
different events and environments. Themes are stored in Gallery.
Press Menu, and select Settings and Themes. To activate a theme, select
Select theme to view the Themes folder in Gallery. Open the folder and
scroll to a theme. Press Options and select Apply theme. See also Gallery
on page 72. To download new themes, select Theme downloads. See
Downloading on page 97.
Tone settings
You can change the settings of the selected active profile.
Press Menu, and select Settings and Tone settings. Select and change
Incoming call alert, Ringing tone, Ringing volume, Vibrating alert,
Message alert tone, Instant message alert tone, Keypad tones and
Warning tones. You can find the same settings in the Profiles menu, see
Profiles on page 62.
Select Alert for to set the phone to ring only upon calls from phone
numbers that belong to a selected caller group. Scroll to the caller group
you want to select or choose All calls and press Mark.
Personal shortcuts
With personal shortcuts you get quick access to frequently used phone
functions.
Right selection key
Press Menu, and select Settings, Personal shortcuts and Right selection
key to allocate one phone function from a predefined list to the right
selection key. See also Standby mode on page 20. This menu is not
shown in some operator variants.
63
Menu functions
Go to options
You can allocate phone functions from a predefined list to the left
selection key.
Press Menu, and select Settings and Personal shortcuts. Select Select
'Go to' options to choose the functions that you want to appear in the
shortcut list. Select Organise 'Go to' options to rearrange the functions
on your personal shortcut list. See also Standby mode on page 20.
Voice commands
You can have phone functions which can be activated by saying a voice
tag. Up to five functions can be selected for voice tag.
Press Menu, and select Settings, Personal shortcuts and Voice
commands. Select the function folder that you want, scroll to the
function to which you want to add a voice tag and press Add. A voice
tag is indicated with
To add a voice command, refer to the instructions in section Adding and
managing voice tags on page 60.
To activate a voice command, refer to the instructions in section Making
a call by using a voice tag on page 61.
Among the functions you can activate by Voice commands are Audible
alerts to check the battery status or the network status via acoustic
signals (beeps):
one beep → low
two beeps → rather low
three beeps → rather strong
four beeps → strong
different tone → no network coverage
Display settings
Press Menu, and select Settings and Display settings.
• Select Wallpaper to set your phone to display a background image,
known as wallpaper, when the phone is in standby mode.
64
Menu functions
• Select Colour schemes to change the colour in some display
components, for example indicators and signal and battery bars, and
the background image that appears when using a menu function.
• Select Menu view to set the way the phone displays the main menu.
• Select Operator logo to set your phone to display or hide the operator
logo.
• Select Screen saver and Select s. saver to choose an animation or a
still image as screen saver from Gallery. Select in Time-out the time
after which the screen saver will be activated. Select On to activate
the screen saver.
Independent of the screen saver settings, for power saving purposes,
a digital clock view will be activated when no function of the phone
has been used for a certain time. See Power saving on page 21.
Time and date settings
Press Menu, and select Settings and Time and date settings.
Select Clock to set the phone to show the clock in standby mode, adjust
the clock and select the time zone and the time format.
Select Date to set the phone to show the date in standby mode, set the
date, and select the date format and date separator.
Select Auto-update of date & time (network service) to set the phone to
automatically update the time and date according to the current time
zone.
Call settings
Press Menu, and select Settings and Call settings. Select
• Automatic volume control and the phone will automatically adjust
the speaker volume according to the background noise.
• Call divert (network service) to divert your incoming calls. For details,
contact your service provider.
• Anykey answer and On and you can answer an incoming call by
briefly pressing any key, except
, selection keys
and
the PTT key and
65
Menu functions
• Automatic redial and On and your phone will make a maximum of
ten attempts to connect the call after an unsuccessful call attempt.
• Speed dialling and On and the names and phone numbers assigned to
the speed-dialling keys, from
to
, can be dialled by
pressing and holding the corresponding number key.
• Call waiting and Activate and the network will notify you of an
incoming call while you have a call in progress (network service). See
Call waiting on page 24.
• Summary after call and On and the phone will briefly display the
approximate duration and cost (network service) of the call after
each call.
• Send my caller ID (network service) and select Yes or Set by network.
• Line for outgoing calls (network service) to select phone line 1 or 2
for making calls. This option is only shown if supported by your SIM
card.
Phone settings
Press Menu, and select Settings, Phone settings. Select
• Phone language to set the display language of your phone. If you
select Automatic the phone selects the language according to the
information on the SIM card.
• Memory status to view how much memory is available in the phone’s
memory.
• Automatic keyguard to set the keypad of your phone to lock
automatically after a pre-set time delay when the phone is in
standby mode and no function of the phone has been used. Select On
and you can set the time from 5 seconds to 60 minutes.
When the keyguard is on, calls still may be possible to the official
emergency number.
• Cell info display and On to receive information from the network
depending on the network cell used (network service).
• Welcome note and key in the note you would like to be shown briefly
when the phone is switched on. To save the note, press Save.
66
Menu functions
• Operator selection and Automatic and the phone automatically
selects one of the cellular networks available in your area. With
Manual, you can select a network that has a roaming agreement
with your home network operator.
• Confirm SIM service actions. See SIM services on page 101.
• Help text activation to set the phone to show or hide the help texts.
• Start-up tone to set the phone to play or not to play a start-up tone
when the phone is switched on.
Connectivity
You can connect the phone to a compatible device via infrared and you
can also define the settings for (E)GPRS dial-up connections.
Infrared
You can set up the phone to receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant. You can send or receive data such
as business cards, graphics, images, sound clips, videos and calendar
notes to or from a compatible phone or data device (for example, a
computer) via the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 Laser product.
Sending and receiving data via IR
1. Ensure that the IR ports of the sending and receiving devices are
pointing at each other and that there are no obstructions between
the devices.
2. To activate the IR port of your phone to receive data via IR, press
Menu, and select Settings, Connectivity and Infrared.
3. The user of the sending phone selects the desired IR function to start
data transfer.
If data transfer is not started within two minutes after the activation of
the IR port, the connection is cancelled and has to be started again.
67
Menu functions
IR connection indicator
• When
is shown continuously, the IR connection is activated and
your phone is ready to send or receive data via its IR port.
• When
blinks, your phone is trying to connect to the other device
or a connection has been lost.
(E)GPRS
General Packet Radio Service (GPRS) is a network service that allows
mobile phones to be used for sending and receiving data over an
Internet Protocol (IP)-based network. GPRS is a data bearer that enables
wireless access to data networks such as the Internet.
EGPRS (Enhanced GPRS), also known as EDGE (Enhanced Data Rates for
Global Evolution), is similar to GPRS. EDGE is a radio interface
modulation technique which increases GRPS data rates. For more
information on the availability of EGPRS and data transfer speed,
contact your network operator or service provider.
The applications that may use (E)GPRS are MMS, Instant messaging,
browsing sessions, e-mail, remote SyncML, Java application
downloading, push to talk and the PC dial-up (for example, Internet and
e-mail).
Before you can use (E)GPRS technology, contact your network operator
or service provider for availability of and subscription to the (E)GPRS
service and save the (E)GPRS settings for each of the applications used
over (E)GPRS. For information on pricing, contact your network operator
or service provider.
Note that when you have selected GPRS as a data bearer, the phone uses
EGPRS instead of GPRS if this is available in the network. You cannot
select between EGPRS and GPRS but for some applications you may be
able to select either GPRS or GSM data (CSD, circuit switched data).
(E)GPRS connection
Press Menu, and select Settings, Connectivity, GPRS and GPRS
connection.
• Select Always online to set the phone to automatically register to an
(E)GPRS network when you switch the phone on.
68
Menu functions
• Select When needed and the (E)GPRS registration and connection
are established when an application using (E)GPRS needs it and
closed when you end the application.
(E)GPRS modem settings
You can connect the phone via infrared or a data cable connection to a
compatible PC and use the phone as a modem to enable (E)GPRS
connectivity from the PC.
To define the settings for (E)GPRS connections from your PC, press
Menu, and select Settings, Connectivity, GPRS and GPRS modem
settings.
• Select Active access point and activate the access point that you
want to use.
• Select Edit active access point to change the access point settings.
• Select Alias for access point. Key in the name that you would like
for the activated access point and press OK.
• Select GPRS access point. Key in the access point name (APN) to
establish a connection to an (E)GPRS network and press OK.
Contact your network operator or service provider for the APN.
You can also set the (E)GPRS dial-up service settings (access point
name) on your PC using the Nokia Modem Options software, see PC
Suite on page 102. If you have set the settings both on your PC and on
your phone, note that the PC’s settings will be used.
Enhancement settings
The enhancement settings menu is shown only if the phone is or has
been connected to a compatible mobile enhancement, such as chargers
and handsfree units.
Press Menu, and select Settings and Enhancement settings. You can
select an enhancement menu if the corresponding enhancement is or
has been connected to the phone. Depending on the enhancement, you
can select some of the following options:
69
Menu functions
• Default profile to select the profile that you want to be automatically
activated when you connect to the selected enhancement. You can
select another profile while the enhancement is connected.
• Automatic answer to set the phone to answer an incoming call
automatically after 5 seconds. If the Incoming call alert is set to Beep
once or Off, automatic answer will not be in use.
• Lights to set the lights permanently On. Select Automatic to set the
lights on for 15 seconds after a keypress.
• When the phone is connected to the full car kit, select Ignition
detector and On to automatically switch off the phone
approximately 20 seconds after you have switched off the car’s
ignition.
Configuration settings
Some of the network services need to have the correct configuration
settings on your phone. Get the settings from your SIM-card, a service
provider as a configuration message or key in your personal settings
manually. Configuration settings from up to ten different service
providers can be stored in the phone and can be managed within this
menu.
To save the configuration settings received by a configuration message
sent by a service provider, see Configuration settings service on page 13.
Press Menu, and select Settings, Configuration settings. Select
• Default configuration settings to view the list of service providers
stored on the phone (the default service provider is highlighted) and
to select another service provider as default. Scroll to a provider and
press Details to view the list with supported applications. To delete a
service provider from the list, press Options and select Delete.
• Activate default in all applications to set the applications to use the
settings from the default service provider.
• Preferred access point to select another access point. Normally the
access point from your preferred network operator is to be used.
70
Menu functions
Keying in the settings manually
To enter, view and edit the settings manually, press Menu, and select
Settings, Configuration settings and Personal configuration settings.
To add a new configuration, press Add new or press Options and select
Add new. Choose one of the application types from the list and key in all
the necessary settings. To activate the settings, press Back and Options
and select Activate.
To view or to edit the user-defined settings select the application that
you want to view and select the setting to edit.
Security settings
When calls are restricted, calls still may be possible to the official emergency
number programmed into your device.
Press Menu, and select Settings and Security settings. Select
• PIN code request to set the phone to request your PIN code every
time the phone is switched on. Some SIM cards do not allow the PIN
code request to be turned off.
• Call barring service (network service) to restrict incoming calls to and
outgoing calls from your phone. A barring password is required.
• Fixed dialling to restrict your outgoing calls to selected phone
numbers if this function is supported by your SIM card.
• Closed user group (network service) to specify the group of people
whom you can call and who can call you.
• Security level. Select Phone and the phone will request the security
code whenever a new SIM card is inserted into the phone.
Select Memory and the phone will request the security code when
the SIM card’s memory is selected and you want to change the
memory in use.
• Access codes to change the security code, PIN code, PIN2 code or
barring password.
• Code in use to specify whether the UPIN or PIN code should be active.
71
Menu functions
Restore factory settings
To reset some of the menu settings to their original values, press Menu,
and select Settings and Restore factory settings.
■ Operator menu
This menu lets you access a portal to services provided by your network
operator. This menu is operator specific. The name and the icon depend
on the operator. For more information, contact your network operator.
The operator can update this menu with a service message. For more
information, see Service inbox on page 97.
■ Gallery
In this menu, you can manage graphics, images,
video clips, recordings and tones. These files are
arranged in folders.
Your phone supports a digital rights management (DRM) system to
protect acquired content. A piece of content, for example a ringing tone,
can be protected and associated with certain usage rules, for example
number of usage times and a certain usage period. The rules are defined
in the content’s activation key which can be delivered either together
with the content or independently depending on the service provider.
You may be able to update these activation keys. Always check the
delivery terms of any content and activation key before acquiring them,
as they may be subject to a fee.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred or forwarded.
1. Press Menu and select Gallery. A list of folders is shown. Images,
Video clips, Themes, Graphics, Tones and Recordings are the original
folders on the phone.
2. Scroll to the desired folder and press Open to view a list of files in the
folder or press Options and one of the options may be available:
Delete folder, Move, Rename folder, Downloads, Details, Type of view,
Sort, Add folder, Memory status and Activation key list.
72
Menu functions
3. If you have opened a folder, select the file that you want to view and
press Open. If Themes was selected before, scroll to a theme and
press View to open the theme package.
Select and open a file, or press Options and use one of the following
functions that may be available for the selected file:
Delete, Send, Edit image, Move, Rename, Set as wallpaper, Set as ring
tone, Apply theme, Details, Type of view, Sort, Delete all, Open in
sequence, Mute audio (Unmute audio), Set contrast, Add folder,
Memory status, Activate content and Activation key list.
■ Media
Camera
You can take photos or record video clips with the phone’s built-in
camera. The camera produces pictures in JPEG format and the video
clips in 3GP format.
The Nokia 6020b device supports an image capture resolution of 640 x 480 pixel.
The image resolution in these materials may appear different.
Taking a photo or a video clip
Press Menu, and select Media, Camera. The live image appears on the
display, and you can use the display as a viewfinder. Move the joystick to
the left or to the right to change the camera mode: Standard photo,
Portrait photo or Video, or if the lighting is dim for taking photos to
Night mode. If you want to add the photo to a name or a phone number
saved in contacts, select Portrait photo.
• To take a photo, press Capture. A shutter sound is heard. The phone
saves the photo in the Images folder of the Gallery menu.
If you want to send the photo as a multimedia message, press Send.
Or select Back to take another photo, or press Options and select, for
example, an option to rename or zoom the saved photo, to set the
contrast, to see the details, to set the photo as wallpaper, to open the
gallery or to delete it.
73
Menu functions
Tip: You can activate the self-timer of the camera for one
picture at a time. Put the camera in photo mode, press
Options and select Self-timer. Press Start, and after the
timeout, the camera takes the photo. While the self-timer is
running, a beeping sound is heard.
• To start recording a video clip, press Record. When you are recording
a video clip, the remaining recording time is shown on the top of the
display.
To pause the recording, press Pause and to resume the recording,
press Continue. To stop the recording, press Stop. The phone saves
the recording in the Video clips folder of the Gallery menu. To view
the recorded video clip, press Play.
Select Back to start recording a new video clip, or press Options and
select, for example, an option to delete or rename the saved video
clip, to set the contrast, or to see the details, to send it as a
multimedia message, or to open the gallery, or to mute/unmute the
microphone.
Camera settings
Press Menu, and select Media, Camera. Press Options and depending on
the active camera mode the following options may appear: Change
mode, Self-timer, Mute/Unmute, Open gallery, or Settings to adjust the
camera settings:
• Default mode to define the default camera mode.
• Image quality to define how much the photo file will be compressed
when saving the image. Select High, Normal or Basic. High provides
the best image quality but uses more memory.
• Video clip length to select the length of the video clips that you
record. The maximum length of a video clip is approximately
50 seconds in duration, depending on conditions. Only video clips
that are of default length or shorter can be sent in a multimedia
message.
• Camera sounds to set the shutter sound and the self-timer tone to
On or Off.
74
Menu functions
• Default title to define the title that will be used when saving a photo
or a video clip. If you select Automatic, the default title will be used,
or if you select My title, you can key in or edit a new title.
Voice recorder
You can record pieces of speech, sound or an active call for up to
5 minutes. For example, this is useful when recording a name and phone
number for writing down later.
The recorder cannot be used when a data call or GPRS connection is active.
Recording
1. Press Menu, select Media and Voice recorder.
Note: If push to talk is not available in your network service,
you can also press the PTT key to activate the Voice recorder.
2. To start the recording, select Record. To start the recording during a
call, press Options, and select Record. While recording a call, all
parties to the call will hear a faint beeping sound every 5 seconds.
3. To end the recording, press Stop. The recording will be saved in the
Recordings folder of the Gallery menu.
4. To listen to the latest recording, select Play last recorded.
5. To send the latest recording, select Send last recorded. The recording
can be sent via IR or MMS.
List of recordings
Press Menu, and select Media, Voice recorder and Recordings list. The
list of folders in the Gallery is shown. Open Recordings to see the list
with recordings.
■ Push to talk
Push to talk over cellular is a two-way radio service
available over a GSM/GPRS cellular network (network
service). Push to talk provides direct voice communication connected
with the push of the PTT key.
75
Menu functions
You can use push to talk to have a conversation with one person or with
a group of people having compatible devices. When your call is
connected, the person or group you are calling does not have to answer
the phone. Besides the GPRS counters, the phone registers only one-toone calls in the recent call lists in Call register. The participants should
confirm the reception of any communications where appropriate as
there is no other confirmation whether the recipient(s) have heard the
call.
To check availability and costs, and to subscribe to the service, contact
your network operator or service provider. Roaming services may be
more limited than for normal calls.
If the push to talk service is not available from your provider, the PTT key
of your phone will activate the Voice recorder.
Before you can use the push to talk service, you must define the required
push to talk service settings.
While you are connected to the push to talk service, you can use the
other functions of the phone. The push to talk over cellular service is not
connected to traditional voice communication, and therefore many of
the services available for traditional voice calls (for example, voice
mailbox) are not available for push to talk over cellular communications.
Push to talk menu
Press Menu, and select Push to talk. The push to talk menu selection list
is shown.
• To connect to or disconnect from the push to talk service, select
Switch PTT on or Switch PTT off.
• To view the received callback requests, select Callback inbox.
• To view the list of push to talk groups, select Group list.
• To view the list of contacts to which you have added the push to talk
address, select Contacts list.
• To add a new push to talk group to the phone, select Add group.
• To set the push to talk settings for use, select PTT settings.
76
Menu functions
• To set the required settings for the push to talk connection, select
Settings and then Configuration settings.
• To open the browser and to connect to the push to talk network
portal provided by the service provider, select Web.
Connecting to and disconnecting from the push to talk
service
• To connect to the push to talk service, press Menu, and select Push to
talk, and Switch PTT on. indicates the push to talk connection.
indicates that the service is temporarily unavailable. The phone
automatically tries to reconnect to the service until you disconnect
from the push to talk service. If you have added group(s) to the
phone, you are automatically joined to the active (Default or
Listened) groups, and the name of the default group is displayed in
standby mode.
• To disconnect from the push to talk service, select Switch PTT off.
Callback requests
If you make a one-to-one call and do not get a response, you can send a
request for the person to call you back.
When someone sends you a callback request, Callback request received
is displayed in standby mode. When you receive a callback request from
someone who is not in your contacts list, you can save the name to your
contacts.
Sending a callback request
• To send a callback request from the contacts list in the Push to talk
menu, select Contacts list. Scroll to a contact, press Options, and
select Send callback.
• To send a callback request from the Contacts, press the scroll key
down in standby mode, and scroll to the desired contact. Press
Details, scroll to the push to talk address, press Options, and select
Send callback.
77
Menu functions
• To send a callback request from the group list in the Push to talk
menu, select Group list, and scroll to the desired group. Press
Options, select Active members, scroll to the desired contact, press
Options, and select Send callback.
• To send a callback request from the callback request list in the Push
to talk menu, select Callback inbox. Scroll to a contact, press
Options, and select Send callback.
Responding to a callback request
1. To open the Callback inbox, press View. The list of nicknames of the
persons who have sent you callback requests is shown.
2. To make a one-to-one call, press the PTT key.
3. To send a call request back to the sender, press Options, and select
Send callback.
To delete the request, press Delete.
Saving the callback request sender
1. To open the Callback inbox, press View. The list of nicknames of the
persons who have sent you callback requests is shown.
2. To view the sender's push to talk address, press Options, and select
View PTT address.
To save a new contact or to add the push to talk address to a contact,
press Options, and select Save as or Add to contact.
Making and receiving a push to talk call
Set the phone to use either loudspeaker or earpiece for push to talk
communication. When the earpiece is selected, you can use the phone
normally by holding it to your ear.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
When connected to the push to talk service, you can make or receive
group calls or one-to-one calls. One-to-one calls are calls you make to
only one person.
78
Menu functions
Making a group call
• To make a call to the default group, press the PTT key. A tone sounds
indicating that the access is granted, and the phone displays your
nickname and group name.
To make a call to a non-default group, select Group list in the push to
talk menu, scroll to the desired group, and press the PTT key.
• Press and hold the PTT key the entire time you are talking, and hold
the phone in front of you so that you can see the display. When you
have finished, release the PTT key. Talking is allowed on a first-come,
first-served basis. When someone stops talking, the first person to
press the PTT key can talk next.
Making a one-to-one call
• To start a one-to-one call from the list of contacts to which you have
added the push to talk address received from the service provider,
select Contacts list. Scroll to a contact, and press the PTT key.
You can also select the contact from the Contacts list.
• To start a one-to-one call from the list of push to talk groups, select
Group list, and scroll to the desired group. Press Options, select
Active members, scroll to the desired contact, and press the PTT key.
• To start a one-to-one call from the list of callback requests you have
received, select Callback inbox. Scroll to the desired nickname, and
press the PTT key.
Receiving a group or a one-to-one call
• A short tone notifies you of an incoming group and one-to-one call.
When receiving a group call, the group name and the nickname of
the caller are displayed. When receiving a one-to-one call from a
person whose information you have saved in Contacts, the saved
name is displayed if identified; otherwise, only the nickname of the
caller is displayed.
• You can either accept or reject an incoming one-to-one call if you
have set the phone to first notify you of the one-to-one calls.
• If you press the PTT key to try to respond to a group while another
member is talking, you hear a queuing tone and Queuing is displayed
79
Menu functions
as long as you press the PTT key. Press and hold the PTT key, and wait
for the other person to finish, then you can talk.
Adding one-to-one contacts
You can save the names of persons to whom you often make one-to-one
calls.
• To add a push to talk address to a name in the Contacts:
Press the scroll key down in standby mode, scroll to the desired
contact, and press Details. Press Options and select Add detail and
PTT address.
• To add a contact to the push to talk contacts list:
To add the push to talk contact, open the push to talk menu, and
select Contacts list. Press Options, and select Add contact.
• To add a contact from the group list:
When connected to the push to talk service, select Group list, scroll
to the desired group, and press Options. Select Active members,
scroll to the member whose contact information you want to save,
and press Options. Select Save as to add a new contact, or Add to
contact to add a push to talk address to a name in the Contacts.
Creating and setting up groups
When you call a group, all members joined to the group hear the call
simultaneously.
Each member in the groups is identified by a nickname, which is shown
as a caller identification. Group members can choose a nickname for
themselves in each group.
Groups are registered with a URL address. One user registers the group
URL in the network by joining the group session the first time.
There are three types of push to talk groups:
• Provisioned groups are closed groups that allow only selected
participants provisioned by the service provider to join in the groups.
80
Menu functions
• Ad hoc groups are groups that the users can create. You can create
your own group, and invite members to the group.
• Ad hoc pro groups; you can create your own group from members in
a provisioned group. For example, a business can have a closed
group, plus separate groups created for certain business functions.
Adding a group
1. Press Menu, and select push to talk, Add group, and Guided.
2. To set the security level for the group, select Open group or Secured
group.
If you select Secured group, the phone automatically creates a
scrambled part to the group address that the members cannot view
when they receive the invitation to the group. Only the person who
creates the secured group, can invite more members to the group.
3. Key in the name for the group, and press OK.
4. Select the status for the group: Default, Listened, or Inactive. The
phone indicates that the group is saved and its status. Default and
Listened are active groups. When you press the PTT key to make a
group call, the default group is called if you have not scrolled to any
other group or contact.
5. To send an invitation to the group, press Yes when the phone
requests for sending an invitation. You can send the invitation using
a text message or infrared.
The members you invite to the open groups can also invite more
members to the group.
Receiving an invitation
1. When you receive a text message invitation to a group, Group
invitation received: is displayed.
2. To view the nickname of the person who sent the invitation and the
group address if the group is not a secured group, press View.
3. To add the group to your phone, press Save, and to set the status for
the group, select Default, Listened, or Inactive.
81
Menu functions
To reject the invitation, press Exit and Yes, or press View, Discard, and
Yes.
Settings for push to talk
There are two kinds of push to talk settings: settings for use and for
connecting to the service.
You may receive the settings for connecting to the service as a
configuration message from your network operator or service provider,
see Configuration settings service on page 13. To key in the settings
manually, see Configuration settings on page 70.
To access the settings for connecting to the service, press Menu, and
select Push to talk, Config. settings. Select from following:
• Configuration. Only the configurations that support the push to talk
service are shown. Select a service provider, or Default, or Personal
config. for push to talk service. You may receive the push to talk
settings as a configuration message, see Configuration settings
service on page 13. To key in the configuration settings manually, see
Configuration settings on page 70.
• Account and select a push to talk service account contained in the
active configuration settings.
• Select one by one to set the following: PTT user name, Default
nickname, PTT password, Domain and Server address .
To access the push to talk settings for use, press Menu, select Push to
talk and PTT settings. Select from following:
• 1 to 1 calls and On to select the phone to allow the reception of
incoming one-to-one calls. If you select Off, you can make but not
receive one-to-one calls. The service provider may offer some
services that override these settings.
1 to 1 calls and Notify to set the phone to first notify you of incoming
one-to-one calls with a ringing tone.
• Listened groups and On to activate the listened groups.
82
Menu functions
• PTT status in startup and Yes to set the phone to automatically
connect to the push to talk service when you switch the phone on.
• Send my PTT address and No to hide your push to talk address from
group and one-to-one calls.
■ Organiser
Alarm clock
You can set the phone to alarm at a desired time. Press Menu, and select
Organiser and Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To change
the alarm time when the alarm time is set, select On. Select Repeat
alarm to set the phone to alert you on selected days of the week.
Select Alarm tone and select the default alarm tone, personalise the
alarm tone by selecting one from the ringing tone list or from Gallery.
When the alarm time expires
The phone will sound an alert tone, and flash Alarm! and the current
time on the display, even if the phone was switched off. Press Stop to
stop the alarm. If you let the phone continue to sound the alarm for a
minute or press Snooze, the alarm stops for about 10 minutes and then
resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you press Stop, the device asks
whether you want to activate the device for calls. Press No to switch off the
device or Yes to make and receive calls. Do not press Yes when wireless phone use
may cause interference or danger.
Calendar
The calendar uses shared memory, see Shared memory on page 11.
Press Menu, and select Organiser and Calendar.
The current day is indicated by a frame. If there are any notes set for the
day, the day is in bold type. To view the day notes, press View. To view a
83
Menu functions
week, press Options and select Week view. To view a single note, press
View.
Other options for the calendar view may be options for creating a note,
for deleting, editing, moving and repeating a note and for copying a
note to another day, or for sending a note as a note directly to another
compatible phone’s calendar or as a text message or a multimedia
message. In Settings you can set the date, time, time zone, date or time
format, or the first day of the week. In Auto-delete notes you can set the
phone to delete old notes automatically after a specified time.
To delete all notes in the calendar, select the month or week view, press
Options and select Delete all notes.
Making a calendar note
Press Menu, and select Organiser and Calendar. Scroll to the date you
want, press Options and select Make a note. Select one of the following
note types:
Meeting,
Call,
Birthday,
Memo or
Reminder.
When the phone sounds an alarm for a note
The phone beeps, and displays the note. With a call note
on the
display, you can call the displayed number by pressing
. To stop the
alarm and to view the note, press View. Press Snooze and the phone
sounds an alarm again after 10 minutes. To stop the alarm without
viewing the note, press Exit.
To-do list
You can save a note for a task that you have to do, select a priority level
for the note and mark it as done when you have completed it. You can
sort the notes by priority or by date. The to-do list uses shared memory,
see Shared memory on page 11.
Press Menu, and select Organiser and To-do list.
Press Add note to make a note. Key in the note and press Save. Select
the priority for the note. The phone automatically sets the deadline
without an alarm for the note. To change the deadline, view the note
and select the deadline option.
84
Menu functions
Or scroll to a note and press View or press Options. To add a new note,
select Add. For example, you can also view and delete the selected note
and delete all the notes that you have marked as done. You can sort the
notes by priority or by deadline, send a note to another phone, save a
note as a calendar note, or access the calendar. While viewing a note,
you can also, for example, select an option to edit the selected note, edit
the deadline or priority for the note, or mark the note as done.
Notes
You can use this application for writing and sending notes to
compatible devices via MMS. The Notes application uses shared
memory, see Shared memory on page 11.
Press Menu and select Organiser and Notes. The phone will ask you to
set the date and time, if they have not already been set when you start
to write a note. To add a note, press Add note or press Options and
select Make a note. Key in the note and select Save. Or scroll to a note
press View or press Options to see the options for notes.
Wallet
In Wallet you can save personal information, for example, credit card
numbers and addresses. The data that are saved in the wallet can easily
be retrieved while browsing to automatically fill in data fields, for
example, when making purchases and the service supports wallet
functionality. You can also save access codes to mobile services that
request a user name and password.
The data in the wallet are protected with a wallet code that you can
define when you access wallet for the first time. At Create wallet code:
key in the code and press OK to confirm it and at Verify wallet code: key
in the code again and press OK. See also Wallet code (4 to 10 digits) on
page 12.
If you want to delete all the content of the wallet and the wallet code,
key in *#7370925538# (*#res wallet# in letters) in standby mode. You
also need the phone’s security code, see Access codes on page 11.
85
Menu functions
To add the content into the wallet menu, and to edit it, access the wallet
menu. To use the content of the wallet in a mobile service, access the
wallet via the browser, see Web on page 93.
Accessing the wallet menu
To access the wallet menu, press Menu, select Organiser and Wallet. Key
in your wallet code and press OK, see Wallet settings on page 87.
Select Wallet profiles to create card combinations, Cards to save
personal card information, Tickets to save the notifications of e-tickets
that you have bought via a mobile service, Receipts to save receipts of
mobile purchases, Personal notes to save all kinds of personal
information that you want to keep protected by the wallet PIN code, or
Settings, see Wallet settings on page 87.
Saving card details
Access the wallet and select Cards. Select the card type to save details:
Payment cards, Loyalty cards, Access cards, User info cards, or Address
cards. If no card is added, press Add new, otherwise, press Options and
select Add new. Fill in the fields for the details and press Done.
If supported by your service provider, you can also receive card
information to your phone as a configuration message. You will be
notified as to which category the card belongs to. For availability of
receiving card information as configuration settings, contact the card
issuer or service provider.
Personal notes
You can save personal notes, for example, account numbers, passwords,
codes or notations.
Access the wallet and select Personal notes. Press Options and you can
view, add, edit a selected note and sort notes either by name or date or
delete notes. When viewing a note, you can edit or delete the selected
note. The option Send via text msg. is for copying the note as a text
message and Copy to calendar is for copying the note to the calendar as
a memo. Use detail is for extracting numbers, e-mail addresses and web
addresses from a note.
86
Menu functions
Creating a wallet profile
When you have saved your personal card details, you can combine them
together into a wallet profile. You can use the profile to retrieve wallet
data from different cards while browsing.
1. Access the wallet and select Wallet profiles.
2. To create a new wallet profile if no profile is added, press Add new.
Otherwise, press Options and select Add new.
3. Fill in the following fields and press Done. Select Select payment
card next, Select loyalty card next, Select access card next, Select
user info card next, Select billing address next, Select shipping
address next, Select receipt delivery address next, Select receipt
delivery method next and Wallet profile name:.
Wallet settings
Access the wallet and select Settings. Select Change code to change the
wallet code. Select RFID to set the RFID ID with the RFID code and RFID
type. (RFID = Radio Frequency Identification, technology to conduct
commercial transactions using your phone).
Guidelines for paying for your purchases with the wallet
• To do your shopping, access the desired service site that supports the
wallet. The service needs to support the Electronic Commerce
Modelling Language specification. See Making a connection to a
service on page 94.
Choose the product that you want to buy and carefully read all
information provided before your purchase.
The text may not fit within a single screen. Therefore, make sure to
scroll through and read all of the text before your purchase.
• To pay for the items that you wish to buy, the phone asks whether
you want to use wallet or not. The phone also asks for your wallet
PIN code.
• Select the card that you want to pay with from the Payment cards
list. Provided that the data form you receive from the service
provider supports the Electronic Commerce Modelling Language
87
Menu functions
specification, the phone automatically fills in the credit card
information or the wallet profile from the wallet.
• Approve the purchase, and the information is forwarded.
• You may receive an acknowledgement or a digital receipt of the
purchase.
• To close the wallet, select Close wallet. If you do not use the wallet
for 5 minutes, it will be automatically closed.
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache.
To empty the cache, see Cache memory on page 98.
Synchronisation
Synchronisation allows you to save your calendar and contacts data on
a remote Internet server (network service) or on a compatible PC. If you
have saved data on the remote Internet server, you can synchronise your
phone by starting the synchronisation from your phone. You can also
synchronise the data in your phone’s contacts, calendar and notes to
correspond to the data of your compatible PC by starting the
synchronisation from your PC.
The contact data in your SIM card will not be synchronised.
Synchronising from your phone
Before synchronising from your phone via internet, you need to
subscribe to a synchronisation service and get the configuration
settings from your provider. For more information on availability and the
synchronisation service settings, contact your service provider.
To start the synchronisation from your phone:
1. Activate the connection settings you need for the synchronisation.
See Settings for the synchronisation from your phone on page 89.
2. Press Menu, select Organiser, Synchronisation, Server sync. Select
Data to be synchronised and mark the data to be synchronised and
88
Menu functions
press Done. Then select Synchronise. The marked data of the active
set will be synchronised after confirmation.
Settings for the synchronisation from your phone
You may receive the synchronisation settings as a configuration
message from the service provider. For more information on availability
and the synchronisation service settings, contact your service provider.
For receiving the settings as a configuration message, see Configuration
settings service on page 13. To key in the settings manually, see
Configuration settings on page 70.
Press Menu, select Organiser, Synchronisation and Server sync and Sync
settings. Select Configuration and scroll to the service provider whose
settings you would like to activate and press Select. Select Account to
see the accounts provided by the service provider. If more than one
account is displayed choose the one you want to use.
Synchronising from your compatible PC
To synchronise contacts, the calendar and the notes from your PC, use a
data cable. You also need the PC Suite software of your phone installed
on the PC. Start the synchronisation from the PC using PC suite.
Ensure that the phone is in standby mode and that the time and date are
set.
■ Applications
Games and applications
Your phone software may include some games and Java applications
specially designed for this Nokia phone.
Launching a game or an application
Press Menu, and select Applications, then Games and Select game, or
Collection and Select application. Scroll to a game or an application and
press Open or press
The following options may be available for games and applications:
• Delete to delete the game or application from the phone.
89
Menu functions
• Details to give additional information about the game or application.
• Update version to check if a new version is available for download
from the services (network service).
• Web page to provide further information or additional data from an
Internet page. This feature needs to be supported by the network.
• App. access to restrict the game or application from accessing the
network to prevent you from accruing unexpected costs. Select
Communication and Network access , Messaging or Connectivity, or
select Phone access or Auto-start. Select in each category, if
available, one of the following permissions: Ask every time, Ask first
time only, Always allowed, Not allowed.
Game and application downloads
Your phone supports J2METM Java applications. Make sure that the
application is compatible with your phone before downloading it.
Press Menu, and select Applications, Games and Game downloads or
Collection and App. downloads. The list of available bookmarks is shown.
Select More bookmarks to access the list of bookmarks in the Web
menu, see Bookmarks on page 96.
Select a bookmark to connect to the desired service. For the availability
of different services, pricing and tariffs, contact your service provider.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Note that when downloading an application, it may be saved in the
Games menu instead of the Applications menu.
Game settings
Press Menu, and select Applications, Games and App. settings to set
sounds, lights and shakes for games.
Memory status for games and applications
To view the amount of memory available for game and application
installations (third shared memory), press Menu, and select
Applications, Games or Collection and then Memory.
90
Menu functions
The games and applications use shared memory, see Shared memory on
page 11.
Calculator
The calculator in your phone adds, subtracts, multiplies, divides,
calculates the square and the square root and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Press Menu, and select Applications, Extras and Calculator. When ’0’ is
displayed on the screen, key in the first number in the calculation, press
for a decimal point. Press Options and select Add, Subtract,
Multiply, Divide, Square, Square root or Change sign. Key in the second
number. To get the answer, press Equals. To start a new calculation, first
press and hold Clear.
Performing a currency conversion
Press Menu, and select Applications, Extras and Calculator. To save the
exchange rate, press Options and select Exchange rate. Select either of
the displayed options. Key in the exchange rate, press
for a decimal
point, and press OK. The exchange rate remains in the memory until you
replace it with another one. To perform the currency conversion, key in
the amount to be converted, press Options and select In domestic or In
foreign.
Countdown timer
Press Menu, and select Applications, Extras and Countdown timer. Key
in the alarm time in hours, minutes and seconds and press OK. If you
wish, write your own note text which is displayed when the time expires,
and press Start to start the countdown timer.
To change the countdown time, select Change time. To stop the timer,
select Stop timer.
If the alarm time is reached when the phone is in standby mode, the
phone sounds a tone and flashes the note text if it is set or else
Countdown time up. Stop the alarm by pressing any key. If no key is
91
Menu functions
pressed, the alarm automatically stops within 30 seconds. To stop the
alarm and to delete the note text, press Exit.
Stopwatch
You can measure time, take intermediate times or lap times using the
stopwatch. During timing, the other functions of the phone can be used.
To set the stopwatch timing in the background, press
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Time observation and time splitting
1. Press Menu, and select Applications, Extras, Stopwatch and Split
timing. You can select Continue if you have set the timing in the
background.
2. Press Start to start the time observation. Press Split every time you
want to take an intermediate time. The intermediate times are listed
below the running time on the display. Scroll to view the times.
3. Press Stop to stop the time observation.
4. To save the times, press Save. Or press Options and you can start the
time observation again or reset the times without saving it.
Lap times
Press Menu, and select Applications, Extras, Stopwatch and Lap timing.
Press Start to start the time observation and Lap to take a lap time.
Press Stop to stop the lap timing. To save the times, press Save and enter
a name. Or press Options and you can save or reset the lap times.
Viewing and deleting times
Press Menu, and select Applications, Extras and Stopwatch.
If the stopwatch is not reset, you can select Show last to view the most
recent measured time. Select View times and select the time set that
you want to view.
To delete the saved times, select Delete times. Select Delete all and press
OK, or select One by one, scroll to the times you want to delete, press
Delete and press OK.
92
Menu functions
■ Web
You can access various mobile Internet services with
your phone’s browser.
Check the availability of these services, pricing and
tariffs with your network operator and/or the service provider.
With your phone’s browser you can view the services that use Wireless
Mark-Up Language (WML) or extensible HyperText Mark-up Language
(XHTML) on their pages. Appearance may vary due to screen size. Note
that you may not be able to view all the details of the Internet pages.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
Basic steps for accessing and using services
1. Save the service settings that are required to access the service that
you want to use. See Setting up the phone for a service on page 93.
2. Make a connection to the given service. See Making a connection to
a service on page 94.
3. Start browsing the pages of the service. See Browsing the pages of a
service on page 94.
4. Once you are finished browsing, end the connection to the service.
See Disconnect from a service on page 95.
Setting up the phone for a service
Your phone may have stored some service settings. Additional settings
may be received as a configuration message from the service provider
that offers the service that you want to use. To receive the service
settings as a configuration message, see Configuration settings service
on page 13 and Configuration settings on page 70.
For more information and for the appropriate settings, contact your
service provider.
93
Menu functions
Making a connection to a service
Make sure that the service settings of the service you want to use are
activated. To activate the settings, press Menu, and select Web, Settings
and Configuration settings. Select Configuration and select the
configuration set you want to activate.
Make a connection to the service. There are several ways to connect:
• Open the start page, for example, the home page of the service
provider: press Menu, and select Web and Home, or in standby mode
press and hold
• Select a bookmark of the service: press Menu, and select Web,
Bookmarks, and select a bookmark. If the bookmark does not work
with the current active service settings, activate another set of
service settings and try again.
• Select the last URL: press Menu, and select Web, Last web addr..
• Key in the address of the service: press Menu, and select Web and
then Go to address. Key in the address of the service and press OK.
Browsing the pages of a service
After you have made a connection to the service, you can start browsing
its pages. The function of the phone keys may vary in different services.
Follow the text guides on the phone display. For more information,
contact your service provider.
Note that if GPRS is selected as the data bearer, the indicator
is
shown on the top left of the display during browsing. If you receive a call
or a text message, or make a call during an (E)GPRS connection, the
indicator
will be shown on the top left of the display to indicate that
the (E)GPRS connection is suspended (on hold). After a call, for example,
the phone tries to reconnect the (E)GPRS connection.
Using the phone keys while browsing
• Use the joystick to browse through the page.
• To select a highlighted item, press
option for opening the link.
94
, or press Options to select the
Menu functions
• To enter letters and numbers, press the keys
enter special characters, press the key
and to
Options while browsing
Press Options and the following options may be available. The service
provider may also offer other options. Select Shortcuts, Home, Add
bookmark, Bookmarks, History, Page options, Download links, Save to
folder, Other options, Reload, Quit.
A cache is a memory location that is used to store data temporarily. If
you have tried to access or have accessed confidential information
requiring passwords, empty the cache after each use. The information or
services you have accessed is stored in the cache. To empty the cache,
see Cache memory on page 98.
Direct calling
The browser supports functions that you can access while browsing. You
can make a voice call, send DTMF tones while a voice call is in progress,
and save a name and a phone number from a page.
Disconnect from a service
To quit browsing and to end the connection, press Options and select
Quit. When Quit browsing? is shown, press Yes.
Alternatively, press
twice, or press and hold
Appearance settings of the browser
While browsing, press Options and select Other options and Appear.
settings, or in standby mode, press Menu, and select Web, Settings and
Appearance settings. Select
• Text wrapping. Select On and the text continues on the next line. If
you select Off, the text will be abbreviated.
• Select Font size and choose a size.
• Show images. Select No and any pictures appearing on the page are
not shown.
95
Menu functions
• Alerts and select Alert for unsecure connection and Yes to set the
phone to alert when a secure connection changes to an insecure one
during browsing. Select Alert for unsecure items and Yes to set the
phone to alert when a secure page contains an insecure item. Note
that these alerts do not guarantee a secure connection. For more
information, see Browser security on page 98.
• Character encoding to select the character set that the phone uses
for showing browser pages that do not include that information or to
select whether to always use UTF-8 encoding when sending a Web
address to a compatible phone.
Cookies
A cookie is data that a site saves in your phone’s browser cache memory.
The data can be, for example, your user information or your browsing
preferences. Cookies will be saved until you clear the cache memory, see
Cache memory on page 98.
While browsing, press Options and select Other options, Security and
Cookie settings, or in standby mode, press Menu, and select Web,
Settings, Security settings and Cookies. Select Allow or Reject to allow
the phone to or prevent the phone from receiving cookies.
Bookmarks
You can save page addresses as bookmarks in the phone’s memory.
1. While browsing, press Options and select Bookmarks,
or in standby mode, press Menu, and select Web and Bookmarks.
2. Scroll to the bookmark that you want to use and press Select to
make a connection to the page associated with the bookmark.
Or select Options to view the title and the address of the selected
bookmark, edit or delete the selected bookmark, or send it directly to
another phone as a bookmark, or as a text message, or create a new
bookmark.
Your device may have some bookmarks loaded for sites not affiliated to Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
96
Menu functions
should take the same precautions, for security or content, as you would with any
Internet site.
Receiving a bookmark
When you have received a bookmark (sent as a bookmark) 1 bookmark
received is displayed. Press Show to view the bookmark. To save the
bookmark, press Save, or press Options and select View to see the
details or Delete to discard it.
Downloading
To download more tones, graphics, games, videos, themes or
applications to your phone (network service), press Menu, and select
Web and Download links. Select Tone downloads, Graphic downloads,
Game downloads, Video downloads, Theme downloads or App.
downloads.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
For the availability of different services, pricing and tariffs, contact your
network operator and/or service provider.
Service inbox
The phone is able to receive service messages (pushed messages) sent by
your service provider (network service). Service messages are
notifications of, for example, news headlines, and they may contain a
text message or an address of a service.
To access the Service inbox in standby mode, when you have received a
service message, press Show. If you press Exit the message is moved to
the Service inbox. To access the Service inbox later, press Menu, and
select Web and Service inbox.
To access the Service inbox while browsing, press Options and select
Other options and Service inbox. Scroll to the message that you want,
press Retrieve to activate the browser and download the marked
content or press Options and select Details to display detailed
information on the service notification, or select Delete to delete it.
97
Menu functions
Service inbox settings
Press Menu, and select Web, Settings and Service inbox settings. Select
Service messages and On (or Off) to set the phone to receive (or not to
receive) service messages.
Select Message filter and On to set the phone to receive service
messages only from content authors approved by the service provider.
To view the list of the approved content authors, select Trusted
channels.
Select Automatic connection. If you have set the phone to receive
service messages and select On, the phone will automatically activate
the browser from standby mode when the phone has received a service
message. If you select Off, the phone will activate the browser only after
you have selected Retrieve when the phone has received a service
message.
Cache memory
The information or services that you have accessed are stored in the
cache of your phone. A cache is a buffer memory, which is used to store
data temporarily. To empty the cache while browsing, press Options and
select Other options and Clear the cache, or in standby mode, press
Menu, and select Web, and Clear the cache.
Browser security
Security features may be required for some services, such as banking
services or online shopping. For such connections you need security
certificates and possibly a security module which may be available on
your SIM card. For more information, contact your service provider.
Security module
The security module can contain certificates as well as private and
public keys. The purpose of the security module is to improve security
services for applications requiring browser connection, and it allows you
to use a digital signature. The certificates are saved in the security
module by the service provider.
98
Menu functions
Press Menu and select Web, Settings, Security settings and Security
module settings. Select from following options:
• Security module details to show the security module title, its status,
manufacturer and serial number.
• Module PIN request to set the phone to request the module PIN when
using services provided by the security module. Key in the code and
select On. To disable the module PIN request, select Off.
• Change module PIN to change the module PIN, if allowed by the
security module. Enter the current module PIN code, then enter the
new code twice.
• Change signing PIN. Select the signing PIN that you want to change.
Enter the current PIN code, then enter the new code twice.
See also Access codes on page 11.
Certificates
There are three kinds of certificates: server certificates, authority
certificates and user certificates.
• The phone uses a server certificate to create a connection with
improved security to the content server. The phone receives the
server certificate from the service provider before the connection is
established and its validity is checked using the authority certificates
saved in the phone. Server certificates are not saved.
The security indicator
is displayed during a connection if the data
transmission between the phone and the content server is encrypted.
The security icon does not indicate that the data transmission
between the gateway and the content server (or place where the
requested resource is stored) is secure. The service provider secures
the data transmission between the gateway and the content server.
• Authority certificates are used by some services, such as banking
services, for checking the validity of other certificates. Authority
certificates can either be saved in the security module by the service
provider, or they can be downloaded from the network, if the service
supports the use of authority certificates.
99
Menu functions
• User certificates are issued to users by a Certifying Authority. User
certificates are required, for example, to create a digital signature
and they associate the user with a specific private key in a security
module.
Important: Note that even if the use of certificates makes the risks
involved in remote connections and software installation considerably
smaller, they must be used correctly in order to benefit from increased
security. The existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct, authentic, or
trusted certificates for increased security to be available. Certificates
have a restricted lifetime. If Expired certificate or Certificate not valid
yet is shown even if the certificate should be valid, check that the
current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.
Digital signature
You can make digital signatures with your phone if your SIM card has a
security module. The signature can be traced back to you via the private
key on the security module and the user certificate that was used to
perform the signature. Using the digital signature can be the same as
signing your name to a paper bill, contract or other document.
To make a digital signature, select a link on a page, for example, the title
of the book that you want to buy and its price. The text to sign (possibly
including amount, date, etc.) will be shown.
Check that the header text is Read and that the digital signature icon
is shown.
Note: If the digital signature icon does not appear, there is a
security breach, and you should not enter any personal data
such as your signing PIN.
To sign the text, read all of the text first and select Sign.
The text may not fit within a single screen. Make sure to scroll through
and read all of the text before signing.
Select the user certificate you want to use. Key in the signing PIN (see
General information on page 10) and press OK. The digital signature
100
Menu functions
icon will disappear, and the service may display a confirmation of your
purchase.
■ SIM services
In addition to the functions available on the phone,
your SIM card may provide additional services that
you can access in this menu which is shown only if it
is supported by your SIM card. The name and contents of the menu
depend on the SIM card.
For availability, rates and information on using SIM services, contact
your SIM card vendor, network operator, service provider or other
vendor.
Depending on the operator you can set the phone to show you the
confirmation messages sent between your phone and the network when
you are using the SIM services by selecting the option Yes within the
menu Confirm SIM service actions, in Phone settings.
Note that accessing these services may involve sending messages or
making a phone call for which you may be charged.
101
PC Connectivity
6. PC Connectivity
You can send and receive e-mail, and access the Internet when your
phone is connected to a compatible PC via an IR connection or a data
cable connection. You can use your phone with a variety of PC
connectivity and data communications applications. With PC Suite you
can, for example, synchronise contacts, calendar and notes between
your phone and the compatible PC or a remote Internet server (network
service).
You may find more information and downloadable files, for example PC
suite, in the support area on the Nokia website, www.nokia.com.
■ PC Suite
PC Suite contains the following applications (in alphabetical order):
• HTML Help to support the application usage.
• Nokia 6020b data modem drivers enable you to use your phone as a
modem.
• Nokia Application Installer to install J2ME Java applications from a
compatible PC to the phone, for example games and dictionaries.
• Nokia Connection Manager to select the connection type between
the PC and phone.
• Nokia Contacts Editor to edit contacts in your phone.
• Nokia Content Copier to back up and restore personal data between
your phone and a compatible PC. Supports also content transfer to
another compatible Nokia phone.
• Nokia Image Converter to make images in supported formats usable
for multimedia messages or wallpaper and to transfer them to your
phone.
• Nokia Modem Options contains settings for HSCSD and GPRS
connections.
102
PC Connectivity
• Nokia Multimedia Player to for playing sounds, images, videos and
multimedia messages on the PC. Multimedia Player allows you to
view multimedia received on your phone or via e-mail.
• Nokia PC Sync to synchronise contacts, calendar and to-do notes
between your phone and a compatible PC.
• Nokia Phone Browser to view the contents of the Gallery folder of
your phone on a compatible PC. You can browse picture and audio
files and also modify files in the phone’s memory and transfer files
between your phone and PC.
• Nokia Phone Editor to send text messages and edit the contacts in
your phone.
• Nokia Settings Manager to edit and send your browser bookmarks
or update the connection sets to your phone.
• Nokia Sound Converter to optimise polyphonic ringing tones in
supported formats to be compatible with your phone and to transfer
them to your phone.
• Nokia Text Message Editor to read, write and send SMS directly
from a PC.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred or forwarded.
(E)GPRS, HSCSD and CSD
With your phone you can use the (E)GPRS (Enhanced GPRS), GPRS
(General Packet Radio Service), HSCSD (High Speed Circuit Switched
Data) and CSD (Circuit Switched Data, GSM data) data services.
For availability and subscription to data services, contact your network
operator or service provider.
Note that the use of HSCSD services consumes the phone’s battery
faster than normal voice or data calls. You may need to connect the
phone to a charger for the duration of the data transfer.
See (E)GPRS modem settings on page 69.
103
PC Connectivity
■ Using data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Note that making or answering phone calls during a computer
connection is not recommended as it might disrupt the operation.
For better performance during data calls, place the phone on a
stationary surface with the keypad facing downward. Do not move the
phone by holding it in your hand during a data call.
104
Battery information
7. Battery information
■ Charging and Discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, buy a new battery. Use only Nokia approved batteries, and recharge
your battery only with Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave the battery connected to a charger. Overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to charge.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire! Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household waste.
105
Technical Information
8. Technical Information
Weight
90 grams (3.2 ounces) incl. BL-5B battery
Battery
760 mAh Li-Ion Battery
Networks
Wireless networks GSM 850,
1800 and 1900
Size
Volume:
Length:
Width:
Thickness:
Frequency range (Rx)
GSM 850: 869- 894 MHz
GSM1800: 1805 - 1865 MHz
GSM1900: 1930 - 1990 MHz
Frequency range (Tx)
GSM 850: 824 - 894 MHz
GSM 1800: 1710 - 1785 MHz
GSM1900: 1850 - 1910 MHz
Tx output power
2 W (max)
Battery voltage
3.7 V DC
Number of channels
299
Memory size
16 MB flash memory
3 MB RAM
Operating temperature
59 °F to 77 °F
(15 °C to 25 °C)
106
4.6 cubic inches (76 ccm)
4.6 in (106 mm)
1.7 in (44 mm)
0.8 in (20 mm)
CARE AND MAINTENANCE
CARE AND MAINTENANCE
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor and light sensor lenses).
• Use only the supplied or an approved replacement antenna. Unauthorised
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
107
ADDITIONAL SAFETY INFORMATION
ADDITIONAL SAFETY INFORMATION
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Traffic Safety
Do not use a hand-held telephone while driving a vehicle. Always secure the
phone in its holder; do not place the phone on the passenger seat or where it can
break loose in a collision or sudden stop.
Remember road safety always comes first!
■ Operating environment
Remember to follow any special regulations in force in any area and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 7/8 inch (2.2 cm) away from the body.
When a carry case, belt clip or holder is used for body-worn operation, it should
not contain metal and should position the device the above-stated distance from
your body.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with a hearing aid should not hold the device to the ear with
the hearing aid. Always secure the device in its holder, because metallic materials
may be attracted by the earpiece. Do not place credit cards or other magnetic
storage media near the device, because information stored on them may be
erased.
In order to transmit data files or messages, this device requires a good quality
connection to the network. In some cases, transmission of data files or messages
may be delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
108
ADDITIONAL SAFETY INFORMATION
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 6 in. (15.3
cm) be maintained between a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are consistent with
the independent research by and recommendations of Wireless Technology
Research. Persons with pacemakers should:
• always keep the device more than 6 in. (15.3 cm) from their pacemaker when
the device is switched on;
• not carry the device in a breast pocket; and
• hold the device to the ear opposite the pacemaker to minimise the potential
for interference.
If you have any reason to suspect that interference is taking place, switch off
your device immediately.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
109
ADDITIONAL SAFETY INFORMATION
■ Aircrafts
Using your device while flying may be prohibited. Switch off your device before
boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refuelling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust or metal powders.
■ Emergency calls
Important:
Wireless phones, including this device, operate using radio signals,
wireless networks, landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
device.
2. Press
as many times as needed to clear the display and ready the device
for calls.
3. Key in the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the
key.
110
ADDITIONAL SAFETY INFORMATION
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in offline or flight mode you
must change the profile to activate the phone function before you can make an
emergency call. Consult this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■ Certification information (SAR)
THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF)
energy adopted by the governments of the USA through the Federal
Communications Commission (FCC) and Canada through Industry Canada (IC).
These limits establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit adopted by the USA and
Canada is 1.6 watts/ kilogram (W/kg) averaged over one gram of tissue. The limit
incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements. Tests for SAR are
conducted using standard operating positions with the device transmitting at its
highest certified power level in all tested frequency bands. The actual SAR level
of an operating device can be well below the maximum value because the device
is designed to use only the power required to reach the network. That amount
changes depending on a number of factors such as how close you are to a
network base station.
The highest SAR value reported to the FCC and IC for this device type when tested
for use at the ear is 0.80 W/kg, and when properly worn on the body is 0.60 W/kg.
SAR information on file with the FCC can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid after searching on FCC ID PPIRM-31.
SAR values reported in other countries may vary depending on differences in
reporting and testing requirements and the network band. Additional SAR
information may be provided under product information at http://
www.nokia.com.
111
APPENDIX
APPENDIX
■ A message from the CTIA
© 2001 Cellular Telecommunications & Internet Association. All Rights
Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC
20036. Phone: (202) 785-0081
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the U.S. today take advantage of the unique
combination of convenience, safety and value delivered by the wireless
telephone. Quite simply, the wireless phone gives people the powerful
ability to communicate by voice--almost anywhere, anytime--with the
boss, with a client, with the kids, with emergency personnel or even with
the police. Each year, Americans make billions of calls from their
wireless phones, and the numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that
every wireless phone user must uphold. When driving a car, driving is
your first responsibility. A wireless phone can be an invaluable tool, but
good judgment must be exercised at all times while driving a motor
vehicle--whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires
alertness, caution and courtesy. It requires a heavy dose of basic
common sense---keep your head up, keep your eyes on the road, check
your mirrors frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the speed limit. It
means using seatbelts and requiring other passengers to do the same.
But with wireless phone use, driving safely means a little more. This
brochure is a call to wireless phone users everywhere to make safety
their first priority when behind the wheel of a car. Wireless
telecommunications is keeping us in touch, simplifying our lives,
protecting us in emergencies and providing opportunities to help others
in need.
112
APPENDIX
When it comes to the use of wireless phones, safety is your most
important call.
Wireless phone "Safety Tips"
1. Get to know your wireless phone and its features such as speed dial
and redial. Carefully read your instruction manual and learn to take
advantage of valuable features most phones offer, including
automatic redial and memory. Also, work to memorize the phone
keypad so you can use the speed dial function without taking your
attention off the road.
2. When available, use a hands free device. A number of hands free
wireless phone accessories are readily available today. Whether you
choose an installed mounted device for your wireless phone or a
speaker phone accessory, take advantage of these devices if available
to you.
3. Position your wireless phone within easy reach. Make sure you place
your wireless phone within easy reach and where you can grab it
without removing your eyes from the road. If you get an incoming
call at an inconvenient time, if possible, let your voice mail answer it
for you.
4. .Suspend conversations during hazardous driving conditions or
situations. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow and ice can be hazardous, but
so is heavy traffic. As a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are
reading an address book or business card, or writing a “to do” list
while driving a car, you are not watching where you are going. It’s
common sense. Don’t get caught in a dangerous situation because
you are reading or writing and not paying attention to the road or
nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you
are not moving or before pulling into traffic. Try to plan your calls
before you begin your trip or attempt to coincide your calls with
113
APPENDIX
times you may be stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while driving, follow this simple
tip--dial only a few numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Stressful or emotional conversations and driving do not
mix--they are distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with aware you are
driving and if necessary, suspend conversations which have the
potential to divert your attention from the road.
8. Use your wireless phone to help others in emergencies. Your wireless
phone provides you a perfect opportunity to be a “Good Samaritan”
in your community. If you see an auto accident, crime in progress or
other serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others to do for
you.
9. Use your wireless phone to call for help. Your wireless phone is one of
the greatest tools you can own to protect yourself and your family in
dangerous situations--with your phone at your side, help is only
three numbers away. Dial 9-1-1 or other local emergency number in
the case of fire, traffic accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
10.Use your wireless phone to help others in emergencies. Your wireless
phone provides you a perfect opportunity to be a “Good Samaritan”
in your community. If you see an auto accident, crime in progress or
other serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others to do for
you.
11.Call roadside assistance or a special wireless non-emergency
assistance number when necessary. Certain situations you encounter
while driving may require attention, but are not urgent enough to
merit a call for emergency services. But you still can use your
wireless phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured or a vehicle you know to be
114
APPENDIX
stolen, call roadside assistance or other special non-emergency
wireless number.
Careless, distracted individuals and people driving irresponsibly
represent a hazard to everyone on the road. Since 1984, the Cellular
Telecommunications Industry Association and the wireless industry
have conducted educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As we approach a
new century, more and more of us will take advantage of the benefits of
wireless telephones. And, as we take to the roads, we all have a
responsibility to drive safely.
The wireless industry reminds you to use your phone safely when
driving.
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85
■ A message from the U.S. Food and Drug Administration to
all users of mobile phones
© July 18, 2001 For updates: http://www.fda.gov/cdrh/phones.
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no proof,
however, that wireless phones are absolutely safe. Wireless phones emit
low levels of radiofrequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in the stand-by
mode. Whereas high levels of RF can produce health effects (by heating
tissue), exposure to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have
suggested that some biological effects may occur, but such findings
have not been confirmed by additional research. In some cases, other
115
APPENDIX
researchers have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is FDA's role concerning the safety of wireless phones?
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it
does with new drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to emit
radiofrequency energy (RF) at a level that is hazardous to the user. In
such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the
phones so that the hazard no longer exists.
FDA belongs to an interagency working group of the federal agencies
that have responsibility for different aspects of RF safety to ensure
coordinated efforts at the federal level. The following agencies belong
to this working group:
• • National Institute for Occupational Safety and Health
• • Environmental Protection Agency
• • Federal Communications Commission
• • Occupational Safety and Health Administration
• • National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold in
the United States must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks
rely upon. While these base stations operate at higher power than do
116
APPENDIX
the wireless phones themselves, the RF exposures that people get from
these base stations are typically thousands of times lower than those
they can get from wireless phones. Base stations are thus not the
subject of the safety questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with
built-in antennas, often called cell mobile or PCS phones. These types of
wireless phones can expose the user to measurable radiofrequency
energy (RF) because of the short distance between the phone and the
user’s head. These RF exposures are limited by Federal Communications
Commission safety guidelines that were developed with the advice of
FDA and other federal health and safety agencies. When the phone is
located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called cordless phones;
which have a base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus produce RF
exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many
studies have suffered from flaws in their research methods. Animal
experiments investigating the effects of radiofrequency energy (RF)
exposures characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories. A few animal
studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the
studies that showed increased tumor development used animals that
had been genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in the absence of
RF exposure. Other studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the conditions under which
people use wireless phones, so we don’t know with certainty what the
results of such studies mean for human health.
117
APPENDIX
5. What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the data
that are needed. Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals would be needed to
provide reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly applicable to
human populations, but 10 or more years follow-up may be needed to
provide answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is hampered by
difficulties in measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement, such as the
angle at which the phone is held, or which model of phone is used.
6. What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with
groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about the
effects of exposure to radiofrequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a
detailed agenda of research needs that has driven the establishment of
new research programs around the world. The Project has also helped
develop a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA)
have a formal Cooperative Research and Development Agreement
(CRADA) to do research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in government,
industry, and academic organizations. CTIAfunded research is
conducted through contracts to independent investigators. The initial
research will include both laboratory studies and studies of wireless
118
APPENDIX
phone users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
7. How can I find out how much radiofrequency energy exposure I
can get by using my wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radiofrequency
energy (RF) exposures. FCC established these guidelines in consultation
with FDA and the other federal health and safety agencies. The FCC limit
for RF exposure from wireless telephones is set at a Specific Absorption
Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is
consistent with the safety standards developed by the Institute of
Electrical and Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes into
consideration the body’s ability to remove heat from the tissues that
absorb energy from the wireless phone and is set well below levels
known to have effects. Manufacturers of wireless phones must report
the RF exposure level for each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/rfsafety) gives directions for locating
the FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
8. What has FDA done to measure the radiofrequency energy coming
from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a
technical standard for measuring the radiofrequency energy (RF)
exposure from wireless phones and other wireless handsets with the
participation and leadership of FDA scientists and engineers. The
standard, Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques, sets forth the first
consistent test methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The test method uses a
tissue-simulating model of the human
head. Standardized SAR test methodology is expected to greatly
improve the consistency of measurements made at different
119
APPENDIX
laboratories on the same phone. SAR is the measurement of the amount
of energy absorbed in tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone complies
with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency
energy from my wireless phone?
If there is a risk from these products--and at this point we do not know
that there is--it is probably very small. But if you are concerned about
avoiding even potential risks, you can take a few simple steps to
minimize your exposure to radiofrequency energy (RF). Since time is a
key factor in how much exposure a person receives, reducing the
amount of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source of
the RF, since the exposure level drops off dramatically with distance. For
example, you could use a headset and carry the wireless phone away
from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these
products, you can use measures like those described above to reduce
your RF exposure from wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radiofrequency energy (RF), the measures described
above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.Some
groups sponsored by other national governments have advised that
children be discouraged from using wireless phones at all. For example,
the government in the United Kingdom distributed leaflets containing
such a recommendation in December 2000. They noted that no evidence
exists that using a wireless phone causes brain tumors or other ill
effects. Their recommendation to limit wireless phone use by children
120
APPENDIX
was strictly precautionary; it was not based on scientific evidence that
any health hazard exists.
11. What about wireless phone interference with medical
equipment?
Radiofrequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, FDA helped develop a detailed
test method to measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard sponsored by the
Association for the Advancement of Medical instrumentation (AAMI).
The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will
allows manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested hearing
aids for interference from handheld wireless phones and helped develop
a voluntary standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless phones so that
no interference occurs when a person uses a compatible phone and a
accompanied hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference be
found to occur, FDA will conduct testing to assess the interference and
work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
• FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
• Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
• International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
121
APPENDIX
• World Health Organization (WHO) International EMF Project
http://www.who.int/emf
• National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001
For updates: http://www.fda.gov/cdrh/phones
122

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:11:26 15:27:39+01:00
Modify Date                     : 2004:11:26 15:27:39+01:00
Creator                         : FrameMaker+SGML 5.5.6p145
Page Count                      : 122
Creation Date                   : 2004:11:26 14:27:39Z
Mod Date                        : 2004:11:26 14:27:39Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2004:11:26 14:27:39Z
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools

Microsoft RM-31 GSM 850/ 1800/ 1900 Phone User Manual Manual

Microsoft Mobile Oy GSM 850/ 1800/ 1900 Phone Manual

Manual

FCC ID Filing: PPIRM-31

Navigation menu

Namespaces

Views

Navigation