Microsoft RM-320 Quad band GSM / WCDMA Phone with WLAN & Bluetoot User Manual Manual

Microsoft Mobile Oy Quad band GSM / WCDMA Phone with WLAN & Bluetoot Manual

Contents

Manual

Nokia N95 8GB User GuideIssue 1 DRAFTDraft
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-320 product is in compliance with the essential requirementsand other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.© 2007 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nseries, N95, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of theirrespective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.This product includes software licensed from Symbian Software Ltd © 1998-2007. Symbian and Symbian OS are trademarks of SymbianLtd.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.Portions of the Nokia Maps software are copyright © 1996-2002 The FreeType Project. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com..Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANYLOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATIONTO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIMEWITHOUT PRIOR NOTICE.Draft
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or relatedto Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibilityfor end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warrantyfor the third-party applications.BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONSOR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer fordetails, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversioncontrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment.Issue 1DRAFTDraft
ContentsFor your safety ............................................8About your device...........................................................9Network services...........................................................10Enhancements, batteries, and chargers.....................10Get connected............................................11Useful information.....................................12Help.................................................................................12Get started.....................................................................12Nokia support and contact information.....................12Extended user guide.....................................................12Additional applications................................................12Software updates..........................................................13Settings..........................................................................13Access codes..................................................................13Prolong battery life.......................................................14Your device.................................................16Your device in North America......................................16Welcome........................................................................16Transfer content............................................................16Display indicators..........................................................17Volume and loudspeaker control................................18Lock the keypad............................................................19Offline profile.................................................................19Games.............................................................................20Multimedia menu..........................................................20Fast downloading.........................................................21Web browser..............................................22Browse the web............................................................22Browser toolbar............................................................23Navigate pages..............................................................24Bookmarks.....................................................................24Empty the cache............................................................25End the connection.......................................................25Connection security......................................................25Web settings..................................................................25Connections................................................27Wireless LAN..................................................................27About WLAN................................................................27WLAN connections......................................................27WLAN wizard...............................................................28WLAN internet access points.....................................28Connection manager....................................................29Active data connections.............................................29Available WLAN networks..........................................29Bluetooth connectivity.................................................29About Bluetooth connectivity...................................29Settings.......................................................................30Security tips................................................................31Send data using Bluetooth connectivity..................31Pair devices.................................................................31Receive data using Bluetooth connectivity.............32USB..................................................................................32PC connections..............................................................33Nokia Video Centre.....................................34Find and view videos....................................................34Internet videos..............................................................35Play downloaded videos..............................................35Transfer videos from your PC.......................................35ContentsDraft
Settings..........................................................................36Music folder................................................37Music player...................................................................37Play a song or a podcast episode.............................37Music menu.................................................................38Playlists.......................................................................38Podcasts......................................................................39Home network with music player............................39Transfer music to your device...................................40Transfer music from PC...........................................40Transfer with Windows Media Player....................41Nokia Music Store..........................................................41Visual Radio...................................................................42Listen to the radio......................................................42View visual content....................................................43Nokia Podcasting..........................................................43Settings.......................................................................43Downloads..................................................................44Media folder...............................................45RealPlayer .....................................................................45Play video clips...........................................................45Stream content over the air......................................45Activation keys..............................................................46Camera.......................................................48About the camera.........................................................48Image capture...............................................................48Still image camera indicators...................................48Active toolbar.............................................................49Take pictures..............................................................50After taking a picture.................................................51Flash.............................................................................51Video recording.............................................................52Video capture indicators...........................................52Record videos.............................................................52After recording a video..............................................53Camera settings.............................................................53Still image camera settings.......................................54Setup settings—adjust colour and lighting............54Video settings.............................................................55Gallery........................................................57View and organise files................................................57Images and video clips.................................................57View images and videos............................................57Active toolbar.............................................................58Albums.........................................................................59Slide show...................................................................59TV-out mode..................................................................59Share images and videos online..................................60About home network...................................................61Positioning (GPS)........................................62About GPS.......................................................................62GPS receiver...................................................................63About satellite signals..................................................63Nokia Maps.....................................................................64About Nokia Maps......................................................64Browse maps..............................................................64Satellite information..................................................66Download maps..........................................................66Find a place.................................................................67Plan a route.................................................................68Extra services for Nokia Maps....................................68Navigation................................................................68Guides.......................................................................69GPS data.........................................................................69Retrieve position information..................................70ContentsDraft
Trip meter...................................................................70Personalise your device.............................71Themes...........................................................................71Profiles—set tones........................................................71Modify the standby mode............................................72Modify the main menu.................................................72Time management.....................................73Clock ..............................................................................73Alarm clock..................................................................73World clock.................................................................73Calendar.........................................................................73Create a calendar entry..............................................74Calendar views............................................................74Messaging..................................................75Messaging main view...................................................75Write and send messages............................................75Messaging inbox...........................................................77Receive messages.......................................................77Multimedia messages................................................77Mailbox...........................................................................78Define the e-mail settings.........................................78Open the mailbox.......................................................78Retrieve e-mail messages..........................................78Delete e-mail messages.............................................79Disconnect from the mailbox....................................79Messaging settings.......................................................79Text message settings...............................................80Multimedia message settings...................................80E-mail settings............................................................81Manage mailboxes..................................................81Connection settings.................................................81User settings............................................................82Retrieval settings.....................................................82Automatic retrieval settings...................................83Other settings.............................................................83Make calls...................................................84Voice calls.......................................................................84Voice and video mailboxes..........................................84Answer or decline a call................................................84Make a video call...........................................................85Answer or decline a video call.....................................86Internet calls..................................................................86Create an internet call profile...................................86Connect to the internet call service..........................87Make internet calls ....................................................87Service settings...........................................................88Log..................................................................................88Recent calls.................................................................88Call duration................................................................89Contacts (phonebook)................................90Save and edit names and numbers.............................90Add ringing tones for contacts....................................90Copy contacts.................................................................91Applications folder.....................................92Calculator.......................................................................92Application manager....................................................92Install applications and software ............................92Remove applications and software..........................94Tools folder................................................95File manager..................................................................95Mass memory tool.........................................................95Settings......................................................96ContentsDraft
General settings............................................................96Personalisation settings............................................96Enhancement settings...............................................97Security settings.........................................................98Phone and SIM.........................................................98Certificate management.........................................98Restore original settings...........................................99Positioning settings...................................................99Phone settings............................................................100Call settings...............................................................100Call divert..................................................................101Network settings......................................................101Connection settings....................................................102Data connections and access points......................102Access points............................................................102Create a new access point....................................102Packet data access points.....................................103WLAN internet access points................................104Packet data settings................................................104Wireless LAN settings..............................................105Internet call settings................................................105Troubleshooting......................................106Battery information.................................109Charging and Discharging..........................................109Nokia battery authentication guidelines.................110Authenticate hologram...........................................110What if your battery is not authentic?...................110Care and maintenance.............................112Disposal........................................................................113Additional safety information.................114Small children..............................................................114Operating environment..............................................114Medical devices...........................................................114Implanted medical devices.....................................114Hearing aids..............................................................115Vehicles........................................................................115Potentially explosive environments.........................115Emergency calls...........................................................116CERTIFICATION INFORMATION (SAR)...........................116Index........................................................118ContentsDraft
For your safetyRead these simple guidelines. Not following them maybe dangerous or illegal. Read the complete user guidefor further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it maycause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your handsfree to operate the vehicle while driving.Your first consideration while driving shouldbe road safety.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device offnear medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices cancause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Donot use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use thedevice where blasting is in progress.USE SENSIBLYUse only in the positions as explained in theproduct documentation. Do not touch theantenna areas unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install orrepair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.BACK-UP COPIESRemember to make back-up copies or keepa written record of all important informationstored in your device.8For your safetyDraft
CONNECTING TO OTHER DEVICESWhen connecting to any other device, readits user guide for detailed safetyinstructions. Do not connect incompatibleproducts.EMERGENCY CALLSEnsure the phone function of the device isswitched on and in service. Press the end keyas many times as needed to clear the displayand return to the standby mode. Enter theemergency number, then press the call key.Give your location. Do not end the call untilgiven permission to do so.About your deviceThe wireless device described in this guide is approvedfor use on the (E)GSM 850, 900, 1800, and 1900 andUMTS 2100 networks. Contact your service provider formore information about networks.When using the features in this device, obey all lawsand respect local customs, privacy and legitimaterights of others, including copyrights.Copyright protections may prevent some images,music (including ringing tones), and other contentfrom being copied, modified, transferred, orforwarded.Your device supports internet connections and othermethods of connectivity. Like computers, your devicemay be exposed to viruses, malicious messages andapplications, and other harmful content. Exercisecaution and open messages, accept connectivityrequests, download content, and accept installationsonly from trustworthy sources. To increase the securityof your devices, consider installing, using, andregularly updating antivirus software, firewall, andother related software on your device and anyconnected computer.Warning: To use any features in this device,other than the alarm clock, the device must beswitched on. Do not switch the device on whenwireless device use may cause interference or danger.The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewedor modified.During extended operation, such as an active videosharing session or high-speed data connection, thedevice may feel warm. In most cases, this condition isnormal. If you suspect the device is not workingproperly, take it to the nearest authorized servicefacility.Your device may have preinstalled bookmarks and linksfor third-party internet sites. You may also access otherthird-party sites through your device. Third-party sitesare not affiliated with Nokia, and Nokia does notendorse or assume liability for them. If you choose to9For your safetyDraft
access such sites, you should take precautions forsecurity or content.The images in this guide may differ from your devicedisplay.Network servicesTo use the phone you must have service from a wirelessservice provider. Many of the features require specialnetwork features. These features are not available onall networks; other networks may require that youmake specific arrangements with your service providerbefore you can use the network services. Your serviceprovider can give you instructions and explain whatcharges will apply. Some networks may havelimitations that affect how you can use networkservices. For instance, some networks may not supportall language-dependent characters and services.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, these features will not appear on your device menu.Your device may also have a special configuration suchas changes in menu names, menu order, and icons.Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as MMS, browsing, and e-mail requirenetwork support for these technologies.Enhancements, batteries,and chargersAlways switch the device off and disconnect thecharger before removing the battery.Check the model number of any charger before usewith this device. This device is intended for use whensupplied with power from the DC-4, AC-4, or AC-5charger and from an AC-1, ACP-8, ACP-9, ACP-12, orLCH-12 charger when used with the CA-44 chargeradapter.The battery intended for use with this device is BL-6F.Warning: Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types mayinvalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect thepower cord of any enhancement, grasp and pull theplug, not the cord.10For your safetyDraft
Get connectedNokia N95 8GB supports the following connectivitymethods:●2G and 3G networks●Bluetooth connectivity — to transfer files andconnect to compatible enhancements. See"Bluetooth connectivity," p. 29.●Nokia AV connector (3.5 mm) — to connect tocompatible headsets, headphones, TVs , or homestereo sets. See "TV-out mode," p. 59.●Data cable — to connect to compatible devices,such as printers and PCs. See "USB," p. 32.●Wireless LAN (WLAN) — to connect to the internetand WLAN enabled devices. See "WirelessLAN," p. 27.●Infrared — to transfer and synchronise databetween compatible devices.●GPS — to connect to GPS satellites to measureyour location. See "Positioning (GPS)," p. 62.11Get connectedDraft
Useful informationModel number: Nokia N95-2Hereinafter referred to as Nokia N95 8GB.HelpYour device has context-sensitive help. When anapplication is open, select Options > Help toaccess help for the current view.When you are reading the instructions, to switchbetween help and the application that is open in thebackground, press and hold .To open help from the main menu, select Tools >Utilities > Help. Select the desired application toview its help topics.Get startedSee the get started guide for keys and partsinformation, instructions for setting up the deviceand for other essential information.Nokia support and contactinformationCheck www.nokia.com/support or your local Nokiawebsite for the latest guides, additionalinformation, downloads, and services related toyour Nokia product.If you need to contact customer service, check thelist of local Nokia Care contact centres atwww.nokia.com/customerservice.For maintenance services, check your nearest Nokiaservice centre at www.nokia.com/repair.Extended user guideAn extended version of this user guide is availableon the product support pages of the Nokia website.Some applications or functionalities, for example,the applications in the Office folder, are explainedonly in the extended user guide.Additional applicationsThere are various applications provided by Nokiaand different third-party software developers thathelp you do more with your device. These12Useful informationDraft
applications are explained in the guides that areavailable on the product support pages of the Nokiawebsite.Software updatesNokia may produce software updates that may offernew features, enhanced functions, or improvedperformance. You may be able to request theseupdates through the Nokia Software Updater PCapplication. To update the device software, youneed the Nokia Software Updater application and acompatible PC with Microsoft Windows 2000, XP, orVista operating system, broadband internet access,and a compatible data cable to connect your deviceto the PC.To get more information and to download the NokiaSoftware Updater application, visitwww.nokiausa.com/softwareupdate in the UnitedStates or www.latinoamerica.nokia.com/soporte inLatin America.Tip: To check the software version in yourdevice, enter *#0000# in the standbymode.SettingsYour device normally has MMS, GPRS, streaming, andmobile internet settings automatically configuredin the device, based upon your network serviceprovider information. You may have settings fromyour service providers already installed in yourdevice, or you may receive or request the settingsfrom the network service providers as a specialmessage.You can change the general settings in your device,such as language, standby mode, display, andkeypad lock settings. See "Generalsettings," p. 96.Access codesIf you forget any of the access codes, contact yourservice provider.●Personal identification number (PIN) code — Thiscode protects your SIM card againstunauthorised use. The PIN code (4 to 8 digits) isusually supplied with the SIM card. After threeconsecutive incorrect PIN code entries, the codeis blocked, and you need the PUK code to unblockit.●UPIN code — This code may be supplied with theUSIM card. The USIM card is an enhanced versionof the SIM card and is supported by UMTS mobilephones.●PIN2 code — This code (4 to 8 digits) is suppliedwith some SIM cards, and is required to accesssome functions in your device.13Useful informationDraft
●Lock code (also known as security code) — Thiscode (5 digits) can be used to lock the device toavoid unauthorised use. The factory setting forthe lock code is 12345. To avoid unauthoriseduse of your device, change the lock code. Keepthe new code secret and in a safe place separatefrom your device. If you forget the code, contactyour service provider.●Personal unblocking key (PUK) code and PUK2code — These codes (8 digits) are required tochange a blocked PIN code or PIN2 code,respectively. If the codes are not supplied withthe SIM card, contact the operator whose SIMcard is in your device.●UPUK code — This code (8 digits) is required tochange a blocked UPIN code. If the code is notsupplied with the USIM card, contact the operatorwhose USIM card is in your device.Prolong battery lifeMany features in your device increase the demandon battery power and reduce the battery life time.To save battery power, note the following:●Features that use Bluetooth technology, orallowing such features to run in the backgroundwhile using other features, increase the demandon battery power. To prolong the operating timeof your device, turn the Bluetooth technology offwhen you do not need it.●Features that use wireless LAN (WLAN), orallowing such features to run in the backgroundwhile using other features, increase the demandon battery power. WLAN on your Nokia deviceswitches off when you are not trying to connect,not connected to another access point, or notscanning for available networks. To furtherreduce battery consumption, you can specify thatyour device does not scan, or scans less often, foravailable networks in the background. WLANswitches off in between background scans. See"Wireless LAN," p. 27. When Scan fornetworks is set to Never, the WLAN availabilityicon is not shown in the standby mode. However,you can still manually scan for available WLANnetworks and connect to WLAN networks asusual.●If you have set Packet data connection toWhen available in connection settings, andthere is no packet data coverage (GPRS), thedevice periodically tries to establish a packetdata connection, which causes increaseddemand on battery power. To prolong theoperating time of your device, select Packetdata connection > When needed.●The Nokia Maps application downloads new mapinformation when you scroll to new areas on themap, which increases the demand on batterypower. You can prevent the device fromautomatically downloading new maps. See"Nokia Maps," p. 64.14Useful informationDraft
●If the signal strength of the cellular networkvaries much in your area, your device must scanfor the available network repeatedly. Thisincreases the demand on battery power.If the network mode is set to dual mode in thenetwork settings, the device searches for theUMTS network. If it is not available, the deviceuses the available GSM network. To only use theGSM network, press , and select Tools >Settings > Phone > Network > Networkmode > GSM.●The backlight of the display increases thedemand on battery power. To change the time-out after which the backlight is switched off,press , and select Tools > Settings >General > Personalisation > Display >Light time-out. To adjust the light sensor thatobserves the lighting conditions and adjusts thebrightness of the display, in the display settings,select Light sensor.●Leaving applications running in the backgroundincreases the demand on battery power. To closethe applications you do not use, press and hold, scroll to an application in the list, and pressC.Pressing C does not close Music player. To closeMusic player, select it from the list and Options >Exit.15Useful informationDraft
Your deviceYour device in North AmericaThis Nokia device is designed to be compatible withwireless service networks in many countries. Not allnetworks support all features offered in this device.For instance, video calls, video sharing, push-to-talk, and instant messaging are not compatiblewith the networks in the United States of America.Your device supports 2100 MHz UMTS (HSDPA)network. However, that frequency is not used inNorth America and has been turned off in yourdevice. To activate the 2100 MHz UMTS frequency foruse outside North America, press , and selectTools > Settings > Phone > Network >Network mode > Dual mode.If network operator settings are not automaticallyconfigured in your device, visit the product supportpages at www.nokia.com/support for help inobtaining the correct settings.WelcomeWhen you switch on your device, the Welcomeapplication is displayed.Select from the following:●Sett. wizard — to configure various settings,such as e-mail. For more information on theSettings wizard application, see the guidesavailable at the Nokia product support pages oryour local Nokia website.●Phone switch — to transfer content, such ascontacts and calendar entries, from a compatibleNokia device. See "Transfer content," p. 16.There may also be a demonstration about yourdevice available in the Welcome application.To access the Welcome application later, press ,and select Tools > Utilities > Welcome. You canalso access the individual applications from theirmenu locations.Transfer contentWith the Switch application, you can transfercontent, such as contacts, between two compatibleNokia devices using Bluetooth connectivity orinfrared.The type of content that can be transferred dependson the model of the device from which you want totransfer content. If the other device supportssynchronisation, you can also synchronise databetween the other device and your device. Your16Your deviceDraft
device notifies you if the other device is notcompatible.If the other device cannot be powered on withouta SIM card, you can insert your SIM card in it. Whenyour device is switched on without a SIM card, theoffline profile is automatically activated.Transfer content1. To retrieve data from the other device for thefirst time, on your device, select Phone switchin the Welcome application, or press , andselect Tools > Utilities > Switch.2. Select the connection type you want to use totransfer the data. Both devices must support theselected connection type.3. If you select Bluetooth connectivity: To haveyour device search for devices with Bluetoothconnectivity, select Continue. Select the devicefrom which you want to transfer content. Youare asked to enter a code on your device. Entera code (1-16 digits), and select OK. Enter thesame code on the other device, and select OK.The devices are now paired. See "Pairdevices," p. 31.For some device models, the Switch applicationis sent to the other device as a message. Toinstall the Switch application on the otherdevice, open the message, and follow theinstructions on the display.If you select infrared, connect the two devices.4. From your device, select the content you want totransfer from the other device.Once the transfer has started, you can cancel itand continue later.Transferring time depends on the amount of datato be transferred.Content is transferred from the memory of the otherdevice to the corresponding location in your device.Display indicators The device is being used in a GSM network(network service). The device is being used in a UMTS network(network service). You have one or more unread messages in theInbox folder in Messaging. You have received new e-mail in the remotemailbox. There are messages waiting to be sent in theOutbox folder. You have missed calls. The ringing type is set to silent, and the messagealert tone and e-mail alert tone are set to off. The device keypad is locked. A clock alarm is active. 17Your deviceDraft
The second phone line is being used (networkservice). All calls to the device are diverted to anothernumber (network service). If you have two phonelines, a number indicates the active line. A compatible headset is connected to the device. A compatible TV out cable is connected to thedevice. A compatible text phone is connected to thedevice. A data call is active (network service). A GPRS packet data connection is active (networkservice). indicates the connection is on hold and that a connection is available. A packet data connection is active in a part of thenetwork that supports EGPRS (network service). indicates the connection is on hold and that aconnection is available. The icons indicate thatEGPRS is available in the network, but your device isnot necessarily using EGPRS in the data transfer. A UMTS packet data connection is active (networkservice). indicates the connection is on hold and that a connection is available. High-speed downlink packet access (HSDPA) issupported and active (network service). indicatesthe connection is on hold and that a connectionis available. See "Fast downloading," p. 21. You have set the device to scan for wireless LANs,and a wireless LAN is available (network service).See "About WLAN," p. 27. A wireless LAN connection is active in anetwork that has encryption. A wireless LAN connection is active in a networkthat does not have encryption. Bluetooth connectivity is on. See "Bluetoothconnectivity," p. 29. Data is being transmitted using Bluetoothconnectivity. When the indicator is blinking, yourdevice is trying to connect with another device. A USB connection is active. An infrared connection is active. If theindicator is blinking, the device is trying to connectto the other device or the connection has been lost.Volume and loudspeakercontrolTo increase or decrease the volume level when youhave an active call or are listening to a sound, usethe volume key.18Your deviceDraft
The built-in loudspeakerallows you to speak andlisten from a shortdistance without having to hold the device to yourear.Warning: Do not hold the device near yourear when the loudspeaker is in use, because thevolume may be extremely loud.To use the loudspeaker during a call, selectOptions > Activate loudspeaker.To turn off the loudspeaker, select Options >Activate handset.Lock the keypadTo lock the keys, press the left selection key, thenthe right selection key.To unlock the keys, open the 2-way slide, or pressthe left selection key, then the right selection key.You can select to lock the keypad automatically aftera time-out or when the 2-way slide is closed. See"Security settings," p. 98.Offline profilePress , and select Tools > Profiles > Offline.The offline profile lets you use the device withoutconnecting to the wireless network. When youactivate the offline profile, the connection to thewireless network is turned off, as indicated by inthe signal strength indicator area. All wireless RFsignals to and from the device are prevented. If youtry to send messages, they are placed in the outboxto be sent later.When the offline profile is active, you can use yourdevice without a SIM card.Important: In the offline profile you cannotmake or receive any calls, or use other features thatrequire cellular network coverage. Calls may still bepossible to the official emergency numberprogrammed into your device. To make calls, youmust first activate the phone function by changingprofiles. If the device has been locked, enter the lockcode.When you have activated the offline profile, you canstill use the wireless LAN, for example, to read youre-mail or browse on the internet. Remember tocomply with any applicable safety requirementswhen establishing and using a wireless LANconnection. You can also use Bluetooth connectivitywhile in the offline profile.To leave the offline profile, press the power keybriefly, and select another profile. The device re-enables wireless transmissions (providing there issufficient signal strength). 19Your deviceDraft
GamesYour device is compatible with the N-Gage™ gamingexperience. With N-Gage, you can download andplay high-quality multiplayer games.Your device includes either one of the followingapplications:●Discover N-Gage application — With this previewapplication you can get information about theupcoming N-Gage gaming experience, try outgame demos, and download and install the fullN-Gage application when it becomes available.●N-Gage application — The full featuredapplication gives you access to the complete N-Gage experience. You can find new games, tryand buy games, find other players, and accessscores, events, chat, and more.Press , and select Games to get started.For the full N-Gage experience, you need internetaccess on your device, either through the cellularnetwork or WLAN. Contact your service provider formore information on data services.For more information, visit www.n-gage.com.Multimedia menuWith the multimediamenu, you can view yourmost frequently usedmultimedia content. Theselected content is shownin the appropriateapplication.To open or close themultimedia menu, pressthe multimedia key. Tobrowse the tiles, scroll leftor right. To select items,press the scroll key. To return to the multimediamenu from an open application, press themultimedia key.Select from the following:●Music — Enter Music player and the Now playingview, browse your songs and play lists, ordownload and manage podcasts.●Gallery — View your last taken picture, start aslide show of your images, or view media files inalbums.●Games — Try out Nokia Nseries games.●Maps — View your favourite locations in Maps.●Internet — View your favourite web links in thebrowser.●Contacts — Add your own contacts, sendmessages, or make voice calls. To add a new20Your deviceDraft
contact to an empty position on the list, press thescroll key, and select a contact. To send amessage, in the multimedia menu, select acontact, and Send text message or Sendmultimedia msg..●Videos — View your favourite videos, and videoclips saved in Nokia Video Centre.To change the order of the tiles, select Options >Arrange tiles.Fast downloadingHigh-speed downlink packet access (HSDPA, alsocalled 3.5G, indicated by ) is a network servicein UMTS networks and provides high-speed datadownloads. When HSDPA support in the device isactivated and the device is connected to a UMTSnetwork that supports HSDPA, downloading datasuch as messages, e-mail, and browser pagesthrough the cellular network may be faster. Anactive HSDPA connection is indicated by . See"Display indicators," p. 17.You can activate or deactivate support for HSDPA inthe device settings. See "Packet datasettings," p. 104.For availability and subscription to data connectionservices, contact your service provider.HSDPA only affects the download speed; sendingdata to the network, such as messages and e-mail,is not affected.21Your deviceDraft
Web browserWith the Web browser, you can view hypertextmarkup language (HTML) web pages on the internetas originally designed. You can also browse webpages that are designed specifically for mobiledevices, and use extensible hypertext markuplanguage (XHTML), or the wireless markup language(WML).To browse the web, you need to have an internetaccess point configured in your device.For more information on the web browser, see theextended user guide on the product support pagesof the Nokia website.Browse the webPress , and select Web.Shortcut: To start the browser, press andhold 0 in the standby mode.Important: Use only services that you trustand that offer adequate security and protectionagainst harmful software.Important: Only install and use applicationsand other software from trusted sources, such asapplications that are Symbian Signed or havepassed the Java VerifiedTM testing.Some web pages may contain material, such asgraphics and sounds, that requires a large amountof memory to view. If your device runs out ofmemory while loading such a page, the graphics onthe page are not shown.To browse a web page, in the bookmarks view,select a bookmark, or enter the address in the field(), and press the scroll key.To browse web pages without graphics, to savememory, select Options > Settings > Page >Load content > Text only.Tip: To return to the standby mode withthe browser open in the background,press twice or the end key. To return tothe browser, press and hold , and selectthe browser from the list.To enter a new web page address you want to visit,select Options > Go to web address.Tip: To visit a web page saved as abookmark in the bookmarks view, whilebrowsing, press 1, and select a bookmark.22Web browserDraft
To retrieve the latest content of the page from theserver, select Options > Navigation options >Reload.To save the web address of the current page as abookmark, select Options > Save as bookmark.To use visual history to view snapshots of the pagesyou have visited during the current browsingsession, select Back (available if History list is seton in the browser settings and the current page isnot the first page you visit). To go to a previouslyvisited page, select the page.To save a page while browsing, select Options >Tools > Save pageYou can save pages and browse them later whenoffline. You can also group these saved pages intofolders. To access the pages you have saved, selectOptions > Bookmarks > Saved pages.To open a sublist of commands or actions for thepage that is open, select Options > Serviceoptions (if supported by the web page).To allow or prevent the automatic opening ofmultiple windows, select Options > Window >Block pop-ups or Allow pop-ups.Shortcuts while browsing●Press 1 to open your bookmarks.●Press 2 to search for keywords in the currentpage.●Press 3 to return to the previous page.●Press 5 to list all open windows.●Press 8 to show the page overview of the currentpage. Press 8 again to zoom in and view thedesired section of the page.●Press 9 to enter a new web address.●Press 0 to go to the home page (if defined insettings).●Press * and # to zoom the in or out on the page.Browser toolbarThe browser toolbar helps you select frequentlyused functions of the browser.To open the toolbar, press and hold the scroll keyon an empty spot on a web page. To move withinthe toolbar, scroll left or right. To select a feature,press the scroll key.In the toolbar, select from the following:●Frequently used links — View a list of the webaddresses you visit frequently.●Page overview — See an overview of thecurrent web page.●Find — Search for keywords within the currentpage.●Reload — Refresh the page.●Subscribe to web feeds (if available) — View alist of available web feeds on the current webpage, and subscribe to a web feed.23Web browserDraft
Navigate pagesMini Map and page overview help you navigate webpages that contain a large amount of information.When Mini Map is set on in the browser settings andyou scroll through a large web page, Mini Map opensand shows an overview of the web page youbrowse.To set Mini Map on, select Options > Settings >General > Mini map > On.To move in Mini Map, scroll left, right, up, or down.When you find the desired location, stop scrolling.Mini Map disappears and leaves you at the selectedlocation.When you are browsing a web page that contains alarge amount of information, you can also use Pageoverview to view what kind of information thepage contains.To show the page overview of the current page,press 8. To find the desired spot on the page, scrollup, down, left, or right. Press 8 again to zoom in andview the desired section of the page.BookmarksThe bookmarks view opens when you open the Webapplication. You can select web addresses from a listor from a collection of bookmarks in the Auto.bookmarks folder. You can also enter the URLaddress of the web page you want to visit directlyinto the field ( ). indicates the starting page defined for thedefault access point.You can save URL addresses as bookmarks whilebrowsing on the internet. You can also saveaddresses received in messages to your bookmarksand send saved bookmarks.To open the bookmarks view while browsing, press1, or select Options > Bookmarks.To edit the details of a bookmark, such as the title,select Options > Bookmark manager > Edit.In the bookmarks view, you can also open otherbrowser folders. The Web application allows you tosave web pages during browsing. In the Savedpages folder, you can view the content of the pagesyou have saved offline.Web also keeps track of the web pages you visitduring browsing. In the Auto. bookmarks folder,you can view the list of visited web pages.In Web feeds, you can view saved links to webfeeds and blogs to which you have subscribed. Webfeeds are commonly found on major newsorganisation web pages, personal weblogs, onlinecommunities that offer the latest headlines, andarticle summaries. Web feeds use RSS and Atomtechnologies.24Web browserDraft
Empty the cacheThe information or services you have accessed arestored in the cache memory of the device.A cache is a memory location that is used to storedata temporarily. If you have tried to access or haveaccessed confidential information requiringpasswords, empty the cache after each use. Theinformation or services you have accessed arestored in the cache.To empty the cache, select Options > Clearprivacy data > Clear cache.End the connectionTo end the connection and view the browser pageoffline, select Options > Tools > Disconnect; orto end the connection and close the browser, selectOptions > Exit.To take the browser to the background, press theend key once. To end the connection, press and holdthe end key.To delete the information the network servercollects about your visits to various web pages,select Options > Clear privacy data > Deletecookies.Connection securityIf the security indicator ( ) is displayed during aconnection, the data transmission between thedevice and the internet gateway or server isencrypted.The security icon does not indicate that the datatransmission between the gateway and the contentserver (or place where the requested resource isstored) is secure. The service provider secures thedata transmission between the gateway and thecontent server.Security certificates may be required for someservices, such as banking services. You are notifiedif the identity of the server is not authentic or if youdo not have the correct security certificate in yourdevice. For more information, contact your serviceprovider.Web settingsPress , and select Web.Select Options > Settings and from the following:General settings●Access point — Change the default access point.Some or all access points may be preset for yourdevice by your service provider; you may not beable to change, create, edit, or remove them.●Homepage — Define the home page. 25Web browserDraft
●Mini map — Set Mini Map on or off. See "Navigatepages," p. 24.●History list — While browsing, to select Back tosee a list of the pages you have visited during thecurrent browsing session, set History list on.●Security warnings — Hide or show securitynotifications.●Java/ECMA script — Enable or disable the use ofscripts.Page settings●Load content — Select whether you want toload images and other objects while browsing. Ifyou select Text only, to load images or objectslater during browsing, select Options > Tools >Load images.●Screen size — Select between full screen and thenormal view with the options list.●Default encoding — If text characters are notshown correctly, you can select another encodingaccording to language for the current page.●Block pop-ups — Allow or block automaticopening of different pop-ups while browsing.●Automatic reload — If you want the web pagesto be refreshed automatically while browsing,select On.●Font size — Define the font size that is used forweb pages.Privacy settings●Auto. bookmarks — Enable or disableautomatic bookmark collecting. If you want tocontinue saving the addresses of the visited webpages into the Auto. bookmarks folder, but hidethe folder from the bookmarks view, select Hidefolder.●Form data saving — If you do not want the datayou enter to different forms on a web page to besaved and used the next time you open the page,select Off.●Cookies — Enable or disable the receiving andsending of cookies.Web feed settings●Automatic updates — Define whether you wantthe web feeds to be updated automatically andhow often you want to update them. Setting theapplication to retrieve web feeds automaticallymay involve the transmission of large amountsof data through your service provider's network.Contact your service provider for informationabout data transmission charges.●Acc. point for auto-update — Select thedesired access point for updating. This option isonly available when Automatic updates is on.26Web browserDraft
ConnectionsYour device offers several options to connect to theinternet or to another compatible device or PC.For more information on connectivity, see theextended user guide on the product support pagesof the Nokia website.Wireless LANYour device supports wireless local area network(WLAN). With WLAN, you can connect your device tothe internet and compatible devices that haveWLAN.About WLANTo use WLAN, it must be available in the location,and your device must be connected to the WLAN.Some places, like France, have restrictions on theuse of wireless LAN. Check with your localauthorities for more information.Features that use WLAN, or that are allowed to runin the background while using other features,increase the demand on battery power and reducethe battery life.Your device supports the following WLAN features:●IEEE 802.11b/g standard●Operation at 2.4 GHz●Wired equivalent privacy (WEP) with keys up to128 bits, Wi-Fi protected access (WPA), and802.1x encryption methods. These functions canbe used only if they are supported by thenetwork.WLAN connectionsTo use WLAN, you must create an internet accesspoint (IAP) in a wireless LAN. Use the access pointfor applications that need to connect to theinternet. See "WLAN internet accesspoints," p. 28.Important: Always enable one of theavailable encryption methods to increase thesecurity of your wireless LAN connection. Usingencryption reduces the risk of unauthorized accessto your data.A WLAN connection is established when you createa data connection using a WLAN internet accesspoint. The active WLAN connection ends when youend the data connection.You can use WLAN during a voice call or when packetdata is active. You can only be connected to one27ConnectionsDraft
WLAN access point device at a time, but severalapplications can use the same internet access point.When the device is in the offline profile, you can stilluse WLAN (if available). Remember to comply withany applicable safety requirements whenestablishing and using a WLAN connection.Tip: To check the unique media accesscontrol (MAC) address that identifies yourdevice, enter *#62209526# in thestandby mode.WLAN wizardThe WLAN wizard helps you to connect to a WLANand manage your WLAN connections.The WLAN wizard shows the status of your WLANconnections in the active standby mode. To view theavailable options, scroll to the row showing thestatus, and select it.If the search finds WLANs, for example, WLANnetwork found is displayed, to create an internetaccess point (IAP) and start the web browser usingthis IAP, select the status and Start Webbrowsing.If you select a secured WLAN network, you are askedto enter the relevant passcodes. To connect to ahidden network, you must enter the correctnetwork name (service set identifier, SSID). Tocreate a new access point for a hidden WLAN, selectNew WLAN.If you are connected to a WLAN, the IAP name isdisplayed. To start the web browser using this IAP,select the status and Continue Web browsing. Toend the connection in the WLAN, select the statusand Disconnect WLAN.If WLAN scanning is off and you are not connectedto any WLAN, WLAN scanning off is displayed. Toset scanning on and search for available WLANs,select the status and press the scroll key.To start a search for available WLANs, select thestatus and Search for WLAN. To set WLAN scanningoff, select the status and select WLAN scanningoff.To access the WLAN wizard application in the menu,press , and select Tools > WLAN wiz..WLAN internet access pointsPress , and select Tools > WLAN wiz.Select Options and from the following:●Filter WLAN networks — Filter out WLANs inthe list of found networks. The selected networksare filtered out the next time the applicationsearches for WLANs.●Details — View the details of a network shownin the list. If you select an active connection, theconnection details are displayed.28ConnectionsDraft
●Define access point — Create an internet accesspoint (IAP) in a WLAN.●Edit access point — Edit the details of anexisting IAP.You can also use connection manager to createinternet access points. See "Active dataconnections," p. 29.Connection managerActive data connectionsPress , and select Tools > Connectivity >Conn. mgr. > Active data connections.In the active data connections view, you can see theopen data connections: data calls packet data connections WLAN connectionsNote: The actual time invoiced for calls byyour service provider may vary, depending onnetwork features, rounding off for billing, and soforth.To end a connection, select Options >Disconnect. To close all open connections, selectOptions > Disconnect all.To view the details of a connection, selectOptions > Details. The details shown depend onthe connection type.Available WLAN networksPress , and select Tools > Connectivity >Conn. mgr. > Available WLAN networks.The available WLAN view shows a list of WLANswithin range, their network mode (infrastructure orad hoc), and signal strength indicator. is shownfor networks with encryption, and if your devicehas an active connection in the network.To view the details of a network, select Options >Details.To create an internet access point in a network,select Options > Define access point.Bluetooth connectivityAbout Bluetooth connectivityYou can make a wireless connection to othercompatible devices with Bluetooth connectivity.Compatible devices may include mobile phones,computers, and enhancements such as headsetsand car kits. You can use Bluetooth connectivity tosend images, video clips, music and sound clips, andnotes; make a wireless connection to yourcompatible PC (for example, to transfer files); and 29ConnectionsDraft
connect to a compatible printer to print imageswith Image print.Since devices with Bluetooth wireless technologycommunicate using radio waves, they do not needto be in direct line-of-sight. However, they must bewithin 10 metres (33 feet) of each other, althoughthe connection may be subject to interference fromobstructions such as walls or from other electronicdevices.This device is compliant with BluetoothSpecification 2.0 supporting the following profiles:Advanced Audio Distribution Profile, Audio/VideoRemote Control Profile, Basic Imaging Profile, BasicPrinting Profile, Dial-up Networking Profile, FileTransfer Profile, Hands-Free Profile, Headset Profile,Human Interface Device Profile, Object Push Profile,SIM Access Profile, and Synchronization Profile. Toensure interoperability between other devicessupporting Bluetooth technology, use Nokiaapproved enhancements for this model. Check withthe manufacturers of other devices to determinetheir compatibility with this device.There may be restrictions on using Bluetoothtechnology in some locations. Check with your localauthorities or service provider.Features using Bluetooth technology, or allowingsuch features to run in the background while usingother features, increase the demand on batterypower and reduce the battery life.When the device is locked, you cannot use Bluetoothconnectivity. See "Phone and SIM," p. 98.SettingsPress , and select Tools > Bluetooth.When you open the application for the first time,you are asked to define a name for your device. Youcan change the name later on.Select from the following:●Bluetooth — To make a wireless connection toanother compatible device, first set Bluetoothconnectivity On, then establish a connection. Toswitch off Bluetooth connectivity, select Off. ●My phone's visibility — To allow your device tobe found by other devices with Bluetoothwireless technology, select Shown to all. To seta time after which the visibility is set from shownto hidden, select Define period. To hide yourdevice from other devices, select Hidden. ●My phone's name — Edit the name shown toother devices with Bluetooth wirelesstechnology.●Remote SIM mode — To enable another device,such as a compatible car kit enhancement, to usethe SIM card in your device to connect to thenetwork, select On.30ConnectionsDraft
Security tipsPress , and select Tools > Bluetooth.When you are not using Bluetooth connectivity, tocontrol who can find your device and connect to it,select Bluetooth > Off or My phone's visibility >Hidden.Do not pair with or accept connection requests froman unknown device. This protects your device fromharmful content.Send data using BluetoothconnectivitySeveral Bluetooth connections can be active at atime. For example, if you are connected to acompatible headset, you can also transfer files toanother compatible device at the same time.1. Open the application where the item you wantto send is stored. For example, to send an imageto another compatible device, open Gallery.2. Select the item and Options > Send > ViaBluetooth.Devices with Bluetooth wireless technology thatare within range are displayed. Device icons areas follows: computer phone audio or video device other deviceTo interrupt the search, select Stop.3. Select the device with which you want toconnect.4. If the other device requires pairing before datacan be transmitted, a tone sounds, and you areasked to enter a passcode. See "Pairdevices," p. 31.When the connection is established, Sendingdata is displayed.Tip: When searching for devices, somedevices may show only the uniqueaddress (device address). To find theunique address of your device, enter*#2820# in the standby mode. Pair devicesTo pair with compatible devices and view yourpaired devices, in the main view of Bluetoothconnectivity, scroll right.Before pairing, create your own passcode (1 to 16digits), and agree with the owner of the otherdevice to use the same code. Devices that do nothave a user interface have a factory-set passcode.The passcode is used only once.31ConnectionsDraft
1. To pair with a device, select Options > Newpaired device. Devices that are within range aredisplayed.2. Select the device, and enter the passcode. Thesame passcode must be entered on the otherdevice as well.3. Some audio enhancements connectautomatically to your device after pairing.Otherwise, scroll to the enhancement, and selectOptions > Connect to audio device.Paired devices are indicated by in the devicesearch.To set a device as authorised or unauthorised, scrollto the device, and select from the following options:●Set as authorised — Connections between yourdevice and the authorised device can be madewithout your knowledge. No separateacceptance or authorisation is needed. Use thisstatus for your own devices, such as yourcompatible headset or PC or devices that belongto someone you trust. indicates authoriseddevices in the paired devices view.●Set as unauthorised — Connection requestsfrom this device must be accepted separatelyevery time.To cancel a pairing, scroll to the device, and selectOptions > Delete.If you want to cancel all pairings, select Options >Delete all.Receive data using BluetoothconnectivityWhen you receive data through Bluetoothconnectivity, a tone sounds, and you are asked ifyou want to accept the message. If you accept, is displayed, and the item is placed in theInbox folder in Messaging. Messages receivedthrough Bluetooth connectivity are indicated by.USBPress , and select Tools > Connectivity >USB.To have the device ask the purpose of theconnection each time a compatible data cable isconnected, select Ask on connection.If Ask on connection is set to off or you want tochange the mode during an active connection,select USB mode and from the following:●PC Suite — Use Nokia PC applications such asNokia Nseries PC suite, Nokia Lifeblog, and NokiaSoftware Updater.●Data transfer — Transfer data between yourdevice and a compatible PC. Use this mode alsofor downloading maps with the Nokia MapLoader PC application.32ConnectionsDraft
●Image print — Print images on a compatibleprinter.●Media player — Synchronise music withWindows Media Player.PC connectionsYou can use your device with a variety of compatiblePC connectivity and data communicationsapplications. With Nokia Nseries PC Suite you can,for example, transfer images between your deviceand a compatible PC.Always create the connection from the PC tosynchronise with your device.33ConnectionsDraft
Nokia Video CentreWith Nokia Video Centre (network service), you candownload and stream video clips over the air fromcompatible internet video services using packetdata or WLAN. You can also transfer video clips froma compatible PC to your device and view them inVideo Centre.Video Centre supports the same file formats asRealPlayer. All videos are played in the landscapemode by default.Your device may have predefined services.Service providers may provide free content orcharge a fee. Check the pricing in the service or fromthe service provider.Find and view videos1. Press , and select Video centre.2. To connect to a service, scroll left or right, andselect the desired video service.The device updates and displays the contentavailable in the service.3. To view videos by categories (if available), scrollleft or right to view the other tabs.4. To view information about a video, selectOptions > Video details.5. Some video clips can be streamed over the air,but others must be first downloaded to yourdevice. To download a video clip, selectOptions > Download.To stream a video clip or view a downloaded clip,select Options > Play.6. When the clip is playing, use the media keys tocontrol the player. To adjust the volume, pressthe volume key.34Nokia Video CentreDraft
Downloads continue in the background if you exitthe application. The downloaded videos are savedin Video centre > My videos.To connect to the internet to browse availableservices that you can add to the main view, selectAdd new services.Internet videosInternet videos are video clips distributed in theinternet using RSS-based feeds. You can add newfeeds to Internet videos in the settings.You can view your feeds in the Internet videosfolder in Video Centre.To add or delete feeds, select Options > Feedsubscriptions.To view the videos available in a feed, scroll to it,and press the scroll key.To view information about a video, selectOptions > Video details.To download a video, scroll to it, and selectOptions > Download.To play the downloaded video, press the scroll key.Play downloaded videosThe downloaded videos are saved in Videocentre > My videos.To play a downloaded video, press the scroll key.To play a downloaded video in the home network,select Options > Show via home network. Homenetwork must be configured first. See "About homenetwork," p. 61.When the clip is playing, use the media keys tocontrol the player. To adjust the volume, press thevolume key.If there is not enough free space in the devicememory, the application automatically deletessome of the oldest videos when new videos aredownloaded. indicates videos that may soon bedeleted.To prevent a video from being automaticallydeleted ( ), select Options > Protect.Transfer videos from your PCTransfer your own videos to Video Centre fromcompatible devices using a compatible USB datacable.Tip: To convert video files into mobileformat, you can also use Nokia VideoManager available in Nokia Nseries PCsuite.To transfer videos from a compatible PC, do thefollowing:35Nokia Video CentreDraft
1. To view your device on a PC as a mass memorydevice (E:\) where you can transfer any datafiles, make the connection with a compatibleUSB data cable.2. Select Mass storage as the connection mode.3. Select the videos you want to copy from your PC.4. Transfer the videos to E:\My Videos in the massmemory of your device.The transferred videos appear in the Myvideos folder in Video Centre. Video files in otherfolders of your device are not displayed.SettingsIn the Video Centre main view, select Options >Settings and from the following:●Video service selection — Select the videoservices you want to appear in the main view ofthe application. You can also view the details ofa video service.Some services require a user name and apassword that you receive from the serviceprovider.●Default access points — Select the accesspoints used for the data connection. Using packetdata access points to download files may involvethe transmission of large amounts of datathrough your service provider's network. Contactyour service provider for information about datatransmission charges.●Parental control — Activate the parental lockfor video services.●Preferred memory — Select whetherdownloaded videos are saved in the devicememory or mass memory. If the selectedmemory becomes full, the device saves thecontent in the other memory, if available. If thereis not enough space in the other memory, theapplication automatically deletes some of theoldest videos.●Thumbnails — Select whether to viewthumbnail images in video lists.36Nokia Video CentreDraft
Music folderMusic playerWarning: Listen to music at a moderatelevel. Continuous exposure to high volume maydamage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, becausethe volume may be extremely loud.Music player supports files formats such as AAC, AAC+, eAAC+, MP3, and WMA. Music player does notnecessarily support all features of a file format or allthe variations of file formats.You can also use Music player to listen to podcastepisodes. Podcasting is the method for deliveringaudio or video content over the internet usingeither RSS or Atom technologies for playback onmobile devices and PCs.You can transfer music from other compatibledevices to your device. See "Transfer music to yourdevice," p. 40.Play a song or a podcast episodeYou may have to refresh the music and podcastlibraries after you have updated the song or podcastselection in your device. To add all available itemsto the library, in the Music player main view, selectOptions > Refresh.To play a song or a podcast episode, do thefollowing:1. Press , and select Music > Music player.2. Select Music or Podcasts.3. Select categories to navigate to the song orpodcast episode you want to hear.4. To play the selected files, press .To pause playback, press; to resume, press again. To stop playback, press37Music folderDraft
. To fast forward orrewind, press andhold or .To go to the nextitem, press .To return to thebeginning of theitem, press .To skip to theprevious item, press again within 2 secondsafter a song or podcast has started.To switch random play ( ) on or off, selectOptions > Shuffle.To repeat the current item ( ), all items ( ), orto switch repeat off, select Options > Repeat.If you play podcasts, shuffle and repeat areautomatically switched off.To adjust the volume, press the volume key.To modify the tone of the music playback, selectOptions > Equaliser.To modify the balance and stereo image or toenhance bass, select Options > Audio settings.To view a visualisation during playback, selectOptions > Start visualisation.To return to the standby mode and leave the playerplaying in the background, press the end key, or toswitch to another open application, press and hold.To close the player, select Options > Exit.Music menuPress , and select Music > Music player >Music.The music menu shows the available music. Selectthe desired option in the music menu to view allsongs, sorted songs, or playlists.When the Music player is playing in the background,to open the Now playing view in the multimediamenu, press the multimedia key.PlaylistsPress , and select Music > Music player >Music.To view and manage playlists, in the music menu,select Playlists.To view details of the playlist, select Options >Playlist details.Create a playlist1. Select Options > Create playlist.2. Enter a name for the playlist, and select OK.3. To add songs now, select Yes; or to add thesongs later, select No.38Music folderDraft
4. If you select Yes, select artists to find the songsyou want to include in the playlist. Press thescroll key to add items.To show the song list under an artist title, scrollright. To hide the song list, scroll left.5. When you have made your selections, selectDone.The playlist is saved to the mass memory of yourdevice.To add more songs later, when viewing the playlist,select Options > Add songs.To add songs, albums, artists, genres, andcomposers to a playlist from the different views ofthe music menu, select an item and Options > Addto a playlist > Saved playlist or New playlist.To remove a song from a playlist, select Options >Remove from playlist. This does not delete thesong from the device; it only removes it from theplaylist.To reorder songs in a playlist, scroll to the song youwant to move, and select Options > Reorder list.To grab songs and drop them to a new position, usethe scroll key.PodcastsPress , and select Music > Music player >Podcasts.The podcast menu displays the podcasts availablein the device.Podcast episodes have three states: never played,partially played, and completely played. If anepisode is partially played, it plays from the lastplayback position the next time it is played. If anepisode is never played or completely played, itplays from the beginning.Home network with music playerYou can play content stored in your Nokia deviceremotely on compatible devices in a home network.You can also copy files from your Nokia device toother devices that are connected to the homenetwork. Home network must be configured first.See "About home network," p. 61.Play a song or a podcast remotely1. Press , and select Music > Music player.2. Select Music or Podcasts.3. Select categories to navigate to the song orpodcast episode you want to hear.4. Select the desired song or podcast andOptions > Play > Via home network.5. Select the device in which the file is played.Copy songs or podcasts wirelesslyTo copy or transfer media files from your device toanother compatible device in a home network,select a file and Options > Move and copy > Copy 39Music folderDraft
to home network or Move to home net.. Contentsharing does not have to be switched on in thehome network settings.Transfer music to your deviceYou can transfer music from a compatible PC orother compatible devices using a compatible USBdata cable or Bluetooth connectivity.PC requirements for music transfer:●Microsoft Windows XP operating system (orlater)●A compatible version of the Windows MediaPlayer application. You can get more detailedinformation about Windows Media Playercompatibility from your device's product pageson the Nokia website.●Nokia Nseries PC Suite 1.6 or laterWindows Media Player 10 may cause playbackdelays to WMDRM technology protected files afterthey have been transferred to your device. CheckMicrosoft support website for a hotfix to WindowsMedia Player 10 or get a newer compatible versionof Windows Media Player.Transfer music from PCYou can use three different methods to transfermusic:●To view your device on a PC as a mass memorydevice where you can transfer any data files,make the connection with a compatible USB datacable or Bluetooth connectivity. If you are usingthe USB cable, select Mass storage as theconnection mode.●To synchronise music with Windows MediaPlayer, connect the compatible USB data cableand select Media player as the connectionmode.●To use Nokia Music Manager in Nokia Nseries PCSuite, connect the compatible USB data cable andselect PC Suite as the connection mode.Use Mass storage and Media player modes totransfer files to the mass memory of your device.To change the default USB connection mode, press, and select Tools > USB > USB mode.If you transfer music using the Mass storage or PCSuite transfer mode, you must refresh the libraryafter you have updated the song selection in yourdevice.To refresh the library, in the music menu, selectOptions > Refresh Music library.Both Windows Media Player and Nokia MusicManager in Nokia Nseries PC Suite have beenoptimised to transfer music files. For informationabout transferring music with Nokia MusicManager, see the help function on Nokia Nseries PCSuite or visit the Nokia support pages.40Music folderDraft
Transfer with Windows Media PlayerMusic synchronisation functions may vary betweendifferent versions of the Windows Media Playerapplication. For more information, see thecorresponding Windows Media Player guides andhelp.Manual synchronisationAfter connecting your device to a compatible PC,select manual synchronisation. If there is notenough free memory in your device, WindowsMedia Player selects manual synchronisationautomatically. With manual synchronisation, youcan select the songs and playlists that you want tomove, copy, or remove.1. After your device is connected with WindowsMedia Player, select your device in thenavigation pane on the right, if more than onedevice is connected.2. In the left navigation pane, browse the musicfiles on your PC which you want to synchronise.Check that the list pane contains the files youwant to synchronise and that there is enoughfree memory on the device. See "Filemanager," p. 95.3. To remove songs or albums, select an item in thelist, right-click, and select Remove from list.4. To start the synchronisation, click Start Sync.Automatic synchronisationTo change the default file transfer option inWindows Media Player, click Set up Sync, and selectthe Synchronize device automatically check box.If the Synchronize device automatically checkbox is selected and you connect your device, themusic library in your device is automaticallyupdated based on playlists you have selected inWindows Media Player.If no playlists have been selected, the whole PCmusic library is selected for synchronisation. YourPC library may be so large that it may not fit in thedevice memory and mass memory of your device.See the Windows Media Player help for moreinformation.Nokia Music StoreIn the Nokia Music Store (network service) you cansearch, browse, and purchase music to download toyour device. To purchase music, you first need toregister for the service.To check the Nokia Music Store availability in yourcountry, visit www.nokia.com/music.To access the Nokia Music Store, you must have avalid internet access point in the device.To open Nokia Music Store, press , and selectMusic > Music store.41Music folderDraft
To find more music in different categories of themusic menu, select Options > Find in Musicstore.For more information, see the extended user guideon the product support pages of the Nokia website.Visual RadioYou can use Visual Radio as a traditional FM radiowith automatic tuning and saved stations or withparallel visual information related to the radioprogramme on the display if you tune to stationsthat offer Visual Radio service. The Visual Radioservice uses packet data (network service).Warning: Listen to music at a moderatelevel. Continuous exposure to high volume maydamage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, becausethe volume may be extremely loud.When you open Visual Radio for the first time, awizard helps you to save local radio stations(network service).If you do not have access to the Visual Radio service,the operators and radio stations in your area maynot support Visual Radio.For more information on Visual Radio, see theextended user guide on the product support pagesof the Nokia website.Listen to the radioThe FM radio depends on an antenna other than thewireless device antenna. A compatible headset orenhancement needs to be attached to the device forthe FM radio to function properly.Press , and select Music > Radio.Note that the quality of the radio broadcastdepends on the coverage of the radio station in thatparticular area.You can normally make a call or answer an incomingcall while listening to the radio. The radio is mutedwhen there is an active call.To start a station search, select or . Tochange the frequency manually, select Options >Manual tuning.If you have previously saved radio stations, to go tothe next or previous saved station, select or.To adjust the volume, press the volume key.To listen to the radio using the loudspeaker, selectOptions > Activate loudspeaker.To view available stations based on location, selectOptions > Station directory (network service).To save the current tuned station to your station list,select Options > Save station. To open the list ofyour saved stations, select Options > Stations.42Music folderDraft
To return to the standby mode and allow the FMradio to play in the background, select Options >Play in background.View visual contentTo check availability and costs and to subscribe tothe service, contact your service provider.To view available visual content for a tuned station,select or Options > Start visual service. If thevisual service ID has not been saved for the station,enter it, or select Retrieve to search for it in thestation directory (network service).When the connection to the visual service isestablished, the current visual content is displayed.Nokia PodcastingWith the Nokia Podcasting application (networkservice), you can search, discover, subscribe to, anddownload podcasts over the air, and play, manage,and share audio and video podcasts with yourdevice.Warning: Listen to music at a moderatelevel. Continuous exposure to high volume maydamage your hearing. Do not hold the device nearyour ear when the loudspeaker is in use, becausethe volume may be extremely loud.For more information, see the extended user guideon the product support pages of the Nokia website.SettingsBefore using Nokia Podcasting, set your connectionand download settings.The recommended connection method is WLAN.Check with your service provider for terms and dataservice fees before using other connections. Forexample, a flat rate data plan can allow large datatransfers for one monthly fee.Connection settingsTo edit the connection settings, press , and selectMusic > Podcasting > Options > Settings >Connection. Define the following:●Default access point — Select the access pointto define your connection to the internet.●Search service URL — Define the podcast searchservice to be used in searches.Download settingsTo edit the download settings, press , and selectMusic > Podcasting > Options > Settings >Download. Define the following:●Save to — Define the location where you wantto save your podcasts. For optimal use of storagespace, mass memory is recommended.●Update interval — Define how often podcastsare updated. 43Music folderDraft
●Next update date — Define the date of the nextautomatic update.●Next update time — Define the time of nextautomatic update.Automatic updates only occur if a specific defaultaccess point is selected and Nokia Podcasting isrunning. If Nokia Podcasting is not running, theautomatic updates are not activated.●Download limit (%) — Define the size of thememory that is used for podcast downloads.●If limit exceeds — Define what to do if thedownloads exceed the download limit.Setting the application to retrieve podcastsautomatically may involve the transmission of largeamounts of data through your service provider’snetwork. Contact your service provider forinformation about data transmission charges.To restore the default settings, select Options >Restore default in the settings view.DownloadsAfter you have subscribed to a podcast, fromdirectories, search, or by entering a URL, you canmanage, download, and play episodes inPodcasts.To see the podcasts you have subscribed to, selectPodcasting > Podcasts.To see individual episode titles (an episode is aparticular media file of a podcast), select thepodcast title.To start a download, select the episode title. Todownload or to continue to download selected ormarked episodes, select Options > Download orContinue download. You can download multipleepisodes at the same time.To play a portion of a podcast during download orafter partial downloading, select Podcasts >Options > Play preview.Fully downloaded podcasts can be found in thePodcasts folder, but are not shown until the libraryis refreshed.44Music folderDraft
Media folderFor information on Flash Player, Nokia Lifeblog, andRecorder, see the extended user guide on theproduct support pages of the Nokia website.RealPlayer With RealPlayer, you can play video clips or streammedia files over the air without saving them to thedevice first.RealPlayer supports files with extensions such as .3gp, .mp4, or .rm. However, RealPlayer does notnecessarily support all file formats or all thevariations of file formats.When playback is active, in the landscape view, usethe media keys to control the player.For more information on RealPlayer, see theextended user guide on the product support pagesof the Nokia website.Play video clipsPress , and select Applications > Media >RealPlayer.1. To play a saved media file, select Options >Open and from the following:●Most recent clips — Play one of the last sixfiles played in RealPlayer.●Saved clip — Play a file saved in Gallery.2. Scroll to a file, and press the scroll key to play thefile.To adjust the volume, use the volume key.Stream content over the airMany service providers require you to use aninternet access point (IAP) for your default accesspoint. Other service providers allow you to use aWAP access point.In RealPlayer, you can only open an rtsp:// URLaddress. However, RealPlayer plays a .ram file if youopen an http link to it in a browser.To stream content over the air (network service),select a streaming link saved in Gallery, on a webpage, or received in a text message or multimediamessage. Before live content begins streaming,your device connects to the site and starts loadingthe content. The content is not saved in your device.45Media folderDraft
Activation keysTo view the digital rights activation keys stored inyour device, press , and select Applications >Media > Actv. keys.Digital rights managementContent owners may use different types of digitalrights management (DRM) technologies to protecttheir intellectual property, including copyrights.This device uses various types of DRM software toaccess DRM-protected content. With this device youcan access content protected with WMDRM 10, OMADRM 1.0, and OMA DRM 2.0. If certain DRM softwarefails to protect the content, content owners may askthat such DRM software's ability to access new DRM-protected content be revoked. Revocation may alsoprevent renewal of such DRM-protected contentalready in your device. Revocation of such DRMsoftware does not affect the use of contentprotected with other types of DRM or the use of non-DRM-protected content.Digital rights management (DRM) protected contentcomes with an associated activation key thatdefines your rights to use the content.If your device has OMA DRM protected content, toback up both the activation keys and the content,use the backup feature of Nokia PC Suite. Othertransfer methods may not transfer the activationkeys which need to be restored with the content foryou to be able to continue the use of OMA DRMprotected content after the device memory isformatted. You may also need to restore theactivation keys in case the files on your device getcorrupted.If your device has WMDRM protected content, boththe activation keys and the content will be lost if thedevice memory is formatted. You may also lose theactivation keys and the content in case the files onyour device get corrupted. Losing the activationkeys or the content may limit your ability to use thesame content on your device again. For moreinformation, contact your service provider.Some activation keys may be connected to a specificSIM card, and the protected content can be accessedonly if the SIM card is inserted in the device.In the activation keys main view, select from thefollowing:●Valid keys — View keys that are connected toone or more media files and keys whose validityperiod has not started yet.●Invalid keys — View keys that are not valid; thetime period for using the media file is exceededor there is a protected media file in the devicebut no connected activation key.●Not in use — View keys that have no media filesconnected to them in the device.To buy more usage time or extend the usage periodfor a media file, select an invalid activation key andOptions > Get new key. Activation keys cannot be46Media folderDraft
updated if web service message reception isdisabled.To view detailed information, such as the validitystatus and ability to send the file, scroll to anactivation key, and press the scroll key.47Media folderDraft
CameraTo activate the main camera, press and hold thecapture key, or press , and select Applications >Camera.To close the main camera, press Exit.For image capture tips and information on scenes,sequence mode, and self-timer, see the extendeduser guide on the product support pages of theNokia website.About the cameraYour Nokia N95 8GB has two cameras, a high-resolution camera on the back of the device (themain camera, up to 5 megapixels, in landscapemode) and a lower resolution camera on the front(the secondary camera in portrait mode). You canuse both cameras to take still pictures and recordvideos.Your device supports an image capture resolutionof 2592x1944 pixels. The image resolution in thisguide may appear different.The images and video clips are automatically savedin Images & videos in Gallery. The camerasproduce .jpeg images. Video clips are recorded inthe MPEG-4 file format with the .mp4 file extension,or in the 3GPP file format with the .3gp fileextension (sharing quality). See "Videosettings," p. 55.You can send images and video clips in a multimediamessage, as an e-mail attachment, or by using otherconnection methods, such as Bluetoothconnectivity or wireless LAN connection. You canalso upload them to a compatible online album. See"Share images and videos online," p. 60.To optimise the size of the image or video clip forsending, select the proper image or video qualityfrom the camera settings. Check the size limits ofMMS and e-mail messages with your serviceprovider.Image captureTo activate the main camera, press and hold thecapture key, or press , and select Applications >Camera.Still image camera indicatorsThe still image camera viewfinder displays thefollowing:48CameraDraft
1 — Capture mode indicator2 — Active toolbar. The toolbar is not displayedduring image capture. See "Activetoolbar," p. 49.3 — Battery charge level indicator4 — Image resolution indicator, which indicateswhether the quality of the image is Print 5M -Large, Print 3M - Medium, Print 2M - Medium, E-mail 0.8M - Med., or MMS 0.3M - Small. When youzoom in an image, the resolution of the imagechanges to be lower but the image resolutionindicator remains the same.5 — Image counter, which displays the estimatednumber of images you can capture using the currentimage quality setting and memory in use. Thecounter is not displayed during image capture.6 — The device memory ( ) and mass memory() indicators, which show where images are savedActive toolbarThe active toolbar provides you with shortcuts todifferent items and settings before and after takinga picture or recording a video. Scroll to items, andselect them by pressing the scroll key. You can alsodefine when the active toolbar is visible on thedisplay.The settings in the active toolbar return to thedefault settings after you close the camera.To view the active toolbar before and after taking apicture or recording a video, select Options >Show icons. To view the active toolbar only whenyou need it, select Options > Hide icons. Only thecapture mode and battery level indicators areshown on the display. To activate the active toolbar,press the scroll key. The toolbar is visible for 5seconds.Before taking a picture or recording a video, in theactive toolbar, select from the following: to switch between the video and image modes to select the scene to select the flash mode (images only) to activate the self-timer (images only). to activate the sequence mode (images only). to select a colour effect49CameraDraft
to show or hide the viewfinder grid (imagesonly) to adjust white balance to adjust the exposure compensation (imagesonly) to adjust sharpness (images only) to adjust contrast (images only) to adjust light sensitivity (images only)The icons change to reflect the current status of thesetting.The available options vary depending on thecapture mode and view you are in. See "After takinga picture," p. 51. See "After recording avideo," p. 53. The active toolbar in Gallery hasdifferent options. See "Active toolbar," p. 58.Take picturesBefore taking a picture, note the following:●To make lighting and colour adjustments, use thescroll key to scroll through the active toolbar. See"Setup settings—adjust colour andlighting," p. 54. Saving the captured image maytake longer if you change the zoom, lighting, orcolour settings.●To free memory for new pictures, back up files toa compatible PC using a compatible USB datacable, for example. The device informs you whenthe memory is full, and asks whether you wantto change the memory in use.When taking a picture, note the following:●Use both hands to keep the camera still.●The quality of a digitally zoomed picture is lowerthan that of a nonzoomed picture.●The camera goes into the battery saving mode ifthere are no keypresses for a moment. Tocontinue taking pictures, press the capture key.To take a picture, do the following:1. If the camera is in the video mode, select theimage mode from the active toolbar.2. To lock the focus on anobject, press the capturekey halfway down (maincamera only, notavailable in landscapeand sports scenes). Thegreen locked focusindicator appears on thedisplay. If the focus wasnot locked, the red focusindicator appears. Release the capture key, andpress it halfway down again. You can, however,take the picture without locking the focus.3. To take a picture, press the capture key. Do notmove the device before the image is saved.50CameraDraft
To zoom in or out when taking a picture, use thezoom key in your device.Tip: To open Gallery and view the picturesyou have taken, press on the side ofyour device twice.To activate the front camera, select Options > Usesecondary camera. To take a picture, press thescroll key. To zoom in or out, scroll up or down.To leave the camera open in the background anduse other applications, press . To return to thecamera, press the capture key.After taking a pictureSelect the following from the active toolbar(available only if you select Show capturedimage > On in the still image camera settings):●If you do not want to keep the image, selectDelete ( ).●To send the image using a multimedia message,e-mail, or other connection methods, such asBluetooth connectivity, press the call key, orselect Send ( ). See "Write and sendmessages," p. 75. This option is not availableduring an active call.You can also send the image to a call recipientduring an active call. Select Send to caller ( )(only available during an active call).●To tag images to the print basket for laterprinting, select Add to Print basket ( ).●To send the image to a compatible online album,select (available only if you have set up anaccount for a compatible online album). See"Share images and videos online," p. 60.To zoom in an image after taking it, press toopen it, and use the zoom key on the side of yourdevice.To use the image as wallpaper in the active standby,select Options > Set as wallpaper.To set the image as a call image for a contact, selectOptions > Set as contact call img. > Assign tocontact.To return to the viewfinder to capture a new image,press the capture key.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do notuse the flash on people or animals at close range.Do not cover the flash while taking a picture.The camera of your device has an LED flash for lowlight conditions. The following flash modes areavailable for the still image camera: Automatic(), R. eye redu. ( ), On ( ), and Off ( ).51CameraDraft
To change the flash mode, in the active toolbar,select the desired flash mode.Video recordingTo activate the main camera, press and hold thecapture key, or press , and select Applications >Camera.Video capture indicatorsThe video viewfinder displays the following:1 — Capture mode indicator2 — Audio mute on indicator3 — Active toolbar. The toolbar is not displayedduring recording. See "Active toolbar," p. 49.4 — The battery charge level indicator5 — Video quality indicator that indicates whetherthe quality of the video is TV high quality, TVnormal quality, E-mail high quality, E-mailnorm. quality, or Sharing quality6 — The video clip file type7 — Total available video recording time. When youare recording, the current video length indicatoralso shows the elapsed time and time remaining.8 — The device memory ( ) and mass memory( ) indicators that show where videos are saved9 — The video stabilisation is turned on ( ). See"Video settings," p. 55.To display all viewfinder indicators, selectOptions > Show icons. Select Hide icons todisplay only the video status indicators, and duringthe recording, the available record time, zoom barwhen zooming, and the selection keys.Record videosBefore recording a video, note the following:●To make lighting and colour adjustments, scrollthrough the active toolbar. See "Setup settings—adjust colour and lighting," p. 54.●To free memory for new video clips, you can backup files to a compatible PC using a compatibleUSB data cable, for example. The device informsyou when the memory is full, and asks whetheryou want to change the memory in use.To record a video, do the following:1. If the camera is in the image mode, select thevideo mode from the active toolbar.52CameraDraft
2. To start recording, press the capture key. The redrecord icon ( ) is shown and a tone sounds,indicating that recording has started.3. To pause recording at any time, press Pause.Video recording automatically stops if recordingis set to pause and there are no keypresseswithin a minute. Select Continue to resumerecording.To zoom in or out of the subject, use the zoomkey in your device.4. To stop recording, select Stop. The video clip isautomatically saved to the Images & videosfolder of Gallery. The maximum length of thevideo clip depends on the available memory.To activate the front camera, select Options > Usesecondary camera. To start recording a video,press the scroll key. To zoom in or out, scroll up ordown.After recording a videoAfter you record a video clip, select the followingfrom the active toolbar (available only if Showcaptured video is set to On in the video settings):●To immediately play the video clip you justrecorded, select Play ( ).●If you do not want to keep the video, selectDelete ( ).●To send the video clip using a multimediamessage, e-mail, or other connection methods,such as Bluetooth connectivity, press the call key,or select Send ( ). See "Write and sendmessages," p. 75. See "Send data usingBluetooth connectivity," p. 31. This option is notavailable during an active call. You may not beable to send video clips saved in the .mp4 fileformat in a multimedia message.You can also send the video clip to a call recipientduring an active call. Select Send to caller ( )(only available during an active call).●To upload the video clip to a compatible onlinealbum, select (only available if you have setup an account for a compatible online album).See "Share images and videos online," p. 60.●To return to the viewfinder to record a new videoclip, press the capture key.Camera settingsThere are two kinds of settings for the camera:setup settings and main settings. The setup settingsreturn to the default settings after you close thecamera, but the main settings remain the sameuntil you change them again. To adjust the setupsettings, use the options in the active toolbar. See"Setup settings—adjust colour andlighting," p. 54. To change the main settings, in 53CameraDraft
the image or video mode, select Options >Settings.Still image camera settingsTo change the main settings, in the image mode,select Options > Settings and from the following:●Image quality — Select Print 5M - Large(2592x1944 resolution), Print 3M - Medium(2048x1536 resolution), Print 2M - Medium(1600x1200 resolution), E-mail 0.8M - Med.(1024x768 resolution), or MMS 0.3M - Small(640x480 resolution). The better the imagequality, the more memory the image consumes.If you want to print the image, select Print 5M -Large, Print 3M - Medium, or Print 2M -Medium. If you want to send it using e-mail,select E-mail 0.8M - Med.. To send the imageusing a multimedia message, select MMS 0.3M -Small.These resolutions are only available in the maincamera.●Add to album — Select whether you want tosave the image to a certain album in Gallery. Ifyou select Yes, a list of available albums opens.●Show captured image — Select On if you wantto see the captured image after it is taken orOff if you want to continue taking picturesimmediately.●Default image name — Define the defaultname for the captured images.●Extended digital zoom (main camera only) — On (continuous) allows the zoom incrementsto be smooth and continuous between digitaland extended digital zoom, On (paused) allowsthe zoom increments to pause at the digital andextended digital step point, and Off allows alimited amount of zoom while retaining theimage resolution.●Capture tone — Select the tone you want tohear when you take a picture.●Memory in use — Select where you want tostore your images.●Rotate image — Select whether you want theimage to be rotated upright when you open it inGallery.●Restore camera settings — Select Yes to returnthe default values to the camera settings.Setup settings—adjust colour andlightingTo enable the camera to reproduce colours andlighting more accurately or to add effects to yourpictures or videos, scroll through the active toolbar,and select from the following options:●Flash mode ( ) (images only) — Select thedesired flash mode.54CameraDraft
●Colour tone ( ) — Select a colour effect fromthe list.●White balance ( ) — Select the currentlighting condition from the list. This allows thecamera to reproduce colours more accurately.●Exposure compensation ( ) (imagesonly) — If you are shooting a dark subject againsta very light background, such as snow, adjust theexposure to +1 or +2 to compensate thebackground brightness. For light subjectsagainst a dark background, use -1 or -2.●Sharpness ( ) — Adjust the sharpness of theimage or video image.●Contrast ( ) — Adjust the difference betweenthe lightest and darkest parts of the image orvideo image.●Light sensitivity ( ) (images only) — Increasethe light sensitivity in low light conditions todecrease the risk of images that are grainy or toodark. Higher sensitivity may increase thegraininess of the images.The screen display changes to match any settingsyou make so that you see how the change affectsthe pictures or videos.The available settings vary depending on theselected camera.The setup settings are camera specific; if youchange the settings in the secondary camera, thesettings in the main camera do not change. Thesetup settings do, however, transfer between theimage and video modes. The setup settings returnto the default settings when you close the camera.If you select a new scene, the colour and lightingsettings are replaced by the selected scene. You canchange the setup settings after selecting a scene ifneeded.For more information on the scenes, see theextended user guide on the product support pagesof the Nokia website.Video settingsTo change the main settings, in the video mode,select Options > Settings and from the following:●Video quality — Set the quality of the video clipto TV high quality, TV normal quality, E-mailhigh quality, E-mail norm. quality (standardquality for playback through your handset), orSharing quality. If you want to view the videoon a compatible TV or PC, select TV highquality or TV normal quality, which have VGAresolution (640x480) and the .mp4 file format.You may not be able to send video clips saved inthe .mp4 file format in a multimedia message. Tosend the video clip using a multimedia message,select Sharing quality, which has QCIFresolution and the .3gp file format. The size ofthe video clip recorded with sharing quality islimited to 300 KB (about 20 seconds in duration)55CameraDraft
so that it can be conveniently sent as amultimedia message to a compatible device.●Video stabilisation — Select On to reducecamera shaking when recording the video.●Audio recording — Select Mute if you do notwant to record sound.●Add to album — Select whether you want toadd the recorded video clip to a certain album inGallery. Select Yes to open a list of availablealbums.●Show captured video — Select whether youwant the first frame of the recorded video clip tobe displayed after the recording stops. SelectPlay from the active toolbar (main camera) orOptions > Play (secondary camera) to view thevideo clip.●Default video name — Define the default namefor the captured video clips.●Memory in use — Select where you want tostore your videos.●Restore camera settings — Select Yes to returnthe default values to the camera settings.56CameraDraft
GalleryTo store and organise your images, video clips,sound clips, and streaming links, or share your fileswith other compatible Universal Plug and Play(UPnP) devices through wireless LAN (WLAN), press, and select Gallery.Tip: If you are in another application, toview the last saved picture in Gallery,press on the side of your device. Toenter the Images & videos folder mainview, press the review key again.For information on presentations, printing, andorganising and editing images and videos, see theextended user guide on the product support pagesof the Nokia website.View and organise filesPress , and select Gallery.In Gallery, select Images & videos , Tracks ,Sound clips , Streaming links ,Presentations , or All files , and press the scrollkey to open it.You can browse and openfolders; and mark, copy,and move items to folders.You can also create albumsand mark, copy, and additems to albums. See"Albums," p. 59.To open a file, press thescroll key. Video clips, .ramfiles, and streaming linksopen and play inRealPlayer, and music andsound clips in Music player. See"RealPlayer ," p. 45. See "Music player," p. 37.Images and video clipsView images and videosTo view your images and video clips, press , andselect Gallery > Images & videos.Pictures taken and video clips recorded with thecamera of your device are stored in Images &videos. Images and video clips can also be sent toyou in a multimedia message, as an e-mailattachment, or through Bluetooth connectivity or 57GalleryDraft
infrared. To be able to view a received image orvideo clip in Gallery or in the RealPlayer, you mustfirst save it.The video clips saved in Nokia Video Centre are notshown in Images & videos in Gallery. See "NokiaVideo Centre," p. 34.The images andvideo clip files inImages & videosare in a loop andordered by dateand time. Thenumber of files isdisplayed. Tobrowse the filesone by one, scroll left or right. To browse files ingroups, scroll up or down.To open a file, press the scroll key. When an imageis opened, to zoom in the image, press the zoomkey on the side of your device. The zooming ratio isnot stored permanently.To edit a video clip or a photo, select Options >Edit.Active toolbarIn the Images & videos folder, you can use theactive toolbar as a shortcut to different tasks. Theactive toolbar is available only when you haveselected an image or a video clip.In the active toolbar, scroll up or down to differentitems, and select them by pressing the scroll key.The available options vary depending on the viewyou are in and whether you have selected an imageor a video clip.The settings in the active toolbar return to thedefault settings after you close the camera.If you want the active toolbar to always be visibleon the display, select Options > Show icons.To view the active toolbar only when you need it,select Options > Hide icons. To activate the activetoolbar, press the scroll key.Select from the following: to play the selected video clip to send the selected image or video clip to upload the selected image or video clip to acompatible online album (only available if you haveset up an account for a compatible online album).See "Share images and videos online," p. 60. or to add or remove an image from the printbasket. to print the viewed image to start a slide show of your images to delete the selected image or video clip58GalleryDraft
The available options may vary depending on theview you are in.AlbumsWith albums, you can conveniently manage yourimages and video clips. To view the albums list inGallery, select Images & videos > Options >Albums > View albums.To create a new album, in the albums list view,select Options > New album.To add a picture or a video clip to an album inGallery, scroll to a picture or video clip, and selectOptions > Albums > Add to album. A list ofalbums opens. Select the album to which you wantto add the picture or video clip. The item you addedto the album is still visible in Images & videos inGallery.To remove a file from an album, open the album,scroll to the file, and press C. The file is not deletedfrom Images & videos in Gallery.Slide showTo view your images as a slide show, select animage in Gallery, and Start slide show ( ) in theactive toolbar. The slide show starts from theselected file.To view only the selected images as a slide show,select Options > Mark/Unmark > Mark to markimages, and Options > Slide show > Start tostart the slide show.Select from the following:●Pause — to pause the slide show●Continue — to resume the slide show, if paused●End — to close the slide showTo browse the images, scroll left or right.Before starting the slide show, adjust the slide showsettings. Select Options > Slide show >Settings, and from the following:●Music — to add sound to the slide show. SelectOn or Off.●Song — to select a music file from the list●Delay between slides — to adjust the tempoof the slide show●Zoom and pan — to make the slide show movesmoothly from one slide to another, and letGallery randomly zoom in and out in the imagesTo decrease or increase the volume during the slideshow, use the volume key in your device.TV-out modeTo view the captured images and video clips on acompatible TV, use a Nokia Video Connectivity Cable.59GalleryDraft
Before viewing the images and video clips on TV,you may need to configure the TV-out settings forthe applicable TV system and TV aspect ratio. See"Enhancement settings," p. 97.To watch images and video clips on TV, do thefollowing:1. Connect a Nokia Video Connectivity Cable to thevideo input of a compatible TV.2. Connect the other end of the Nokia VideoConnectivity Cable to the Nokia AV Connector ofyour device.3. You may need to select the cable mode.4. Press , and select Gallery > Images &videos and the file you want to view.The images areshown in theimage viewer,and the videoclips are playedin RealPlayer.All audio,including theactive calls, stereo video clip sound, key tone, andringing tone is routed to the TV when the NokiaVideo Connectivity Cable is connected to the device.You can use the device microphone normally.For all applications other than the Images &videos folder in Gallery and RealPlayer, the TVscreen displays what is displayed on the screen ofyour device.The opened image is displayed in full-screen on theTV. When you open an image in the thumbnail viewwhile it is viewed on the TV, zooming in is notavailable.When you open a highlighted video clip, RealPlayerstarts playing the video clip on the device displayand the TV screen. See "RealPlayer ," p. 45.You can view images as a slide show on TV. All itemsin an album or marked images are displayed on theTV in full-screen while the selected music plays. See"Slide show," p. 59.Share images and videosonlineYou can share images and video clips in compatibleonline albums, weblogs, or in other compatibleonline sharing services on the web. You can uploadcontent, save unfinished posts as drafts andcontinue later, and view the content of the albums.The supported content types may vary dependingon the service provider.Before sharing images and videos online, you mustsubscribe to the service with an online imagesharing service provider, and create a new account.You can usually subscribe to the service on the web60GalleryDraft
page of the service provider. Contact your serviceprovider for details on subscribing to the service.For more information on the application andcompatible service providers, see the Nokia productsupport pages or your local Nokia website.About home networkYour device is compatible with Universal Plug andPlay architecture (UPnP). Using a wireless LAN(WLAN) access point device or a WLAN router, youcan create a home network and connect compatibleUPnP devices that support WLAN to the network,such as your device, a compatible PC, a compatibleprinter, and a compatible sound system or TV, or asound system or TV equipped with a compatiblewireless multimedia receiver.For more information on the home network, see theextended user guide on the product support pagesof the Nokia website.61GalleryDraft
Positioning (GPS)For information on position requests andlandmarks, see the extended user guide on theproduct support pages of the Nokia website.About GPSThe Global Positioning System (GPS) is a worldwideradio navigation system that includes 24 satellitesand their ground stations that monitor theoperation of the satellites. Your device has aninternal GPS receiver.A GPS terminal receives low-power radio signalsfrom the satellites and measures the travel time ofthe signals. From the travel time, the GPS receivercan calculate its location to the accuracy of meters.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.The Global Positioning System (GPS) is operated bythe government of the United States, which is solelyresponsible for its accuracy and maintenance. Theaccuracy of location data can be affected byadjustments to GPS satellites made by the UnitedStates government and is subject to change withthe United States Department of Defense civil GPSpolicy and the Federal Radionavigation Plan.Accuracy can also be affected by poor satellitegeometry. Availability and quality of GPS signalsmay be affected by your location, buildings, naturalobstacles, and weather conditions. The GPS receivershould only be used outdoors to allow reception ofGPS signals.Any GPS should not be used for precise locationmeasurement, and you should never rely solely onlocation data from the GPS receiver and cellularradio networks for positioning or navigation.Your device also supports Assisted GPS (A-GPS).Assisted GPS (A-GPS) is used to retrieve assistancedata over a packet data connection, which assists incalculating the coordinates of your current locationwhen your device is receiving signals fromsatellites.A-GPS is a network service.Your device is preconfigured to use the Nokia A-GPSservice, if no service provider specific A-GPS settingsare available. The assistance data is retrieved fromthe Nokia A-GPS service server only when needed.You must have a packet data internet access pointdefined in the device to retrieve assistance datafrom the Nokia A-GPS service. To define an accesspoint for A-GPS, press , and select Tools >Settings > General > Positioning >62Positioning (GPS)Draft
Positioning server > Access point. A wireless LANaccess point cannot be used for this service. Thepacket data internet access point is asked when GPSis used for the first time in your device.To enable or disable different positioning methods,such as Bluetooth GPS, press , and select Tools >Settings > General > Positioning >Positioning methods.GPS receiverThe GPS receiver is located in the bottom of thedevice. When using the receiver, slide the numerickeypad open, and from an upright position, movethe device to an angle of about 45 degrees, with anunobstructed view of the sky. Do not cover thenumeric keypad with your hand.Establishing a GPSconnection may takefrom a couple ofseconds to severalminutes. Establishinga GPS connection inthe car may takelonger.The GPS receiverdraws its power from the device battery. Using theGPS receiver may drain the battery faster.About satellite signalsIf your device cannot find the satellite signal,consider the following:●If you are indoors, go outdoors to receive a bettersignal.●If the numeric keypad slide is closed, open it.●If you are outdoors, move to a more open space.●Ensure that your hand does not cover the GPSantenna of your device. See "GPSreceiver," p. 63.●If the weather conditions are bad, the signalstrength may be affected.●If the power saver turns on on the display whilethe device is attempting to establish a GPSconnection, the attempt is interrupted.●Establishing a GPS connection may take from acouple of seconds to several minutes.Satellite statusTo check how many satellites your device has found,and whether your device is receiving satellitesignals, press , and select Tools >Connectivity > GPS data > Position >Options > Satellite status. If your device hasfound satellites, a bar for each satellite is shown inthe satellite info view. The longer the bar, thestronger the satellite signal. When your device hasreceived enough data from the satellite signal to 63Positioning (GPS)Draft
calculate the coordinates of your location, the barturns black.Initially your device must receive signals from atleast four satellites to be able to calculate thecoordinates of your location. When the initialcalculation has been made, it may be possible tocontinue calculating the coordinates of yourlocation with three satellites. However, theaccuracy is generally better when more satellitesare found.Nokia MapsAbout Nokia MapsPress , and select Maps.With Maps, you can see your current location on themap, browse maps for different cities and countries,search for addresses and different points of interest,plan routes from one location to another, and savelocations as landmarks and send them tocompatible devices.You can also purchase extra services, such as guidesand a turn-by-turn navigation service with voiceguidance.Maps uses GPS. You can define the positioningmethods used with your device in the devicesettings. See "Positioning settings," p. 99. For themost accurate location information, use either theinternal GPS or an external GPS receiver.When you use Maps for the first time, you may needto define an internet access point for downloadingmap information for your current location. Tochange the default access point later, selectOptions > Settings > Network > Defaultaccess point.Almost all digital cartography is inaccurate andincomplete to some extent. Never rely solely on thecartography provided for use in this device.Downloading maps may involve the transmission oflarge amounts of data through your serviceprovider's network. Contact your service providerfor information about data transmission charges.Tip: You can also download maps by usinga wireless LAN connection or through theinternet using Nokia Map Loader PCsoftware. See "Download maps," p. 66.To receive a note when your device registers to anetwork outside your home cellular network, selectOptions > Settings > Network > Roamingwarning > On. Contact your network serviceprovider for details and roaming costs.Browse mapsThe map coverage varies by country.64Positioning (GPS)Draft
When you open the Maps application, Maps zoomsin to the location that was saved from your lastsession. If no position was saved from the lastsession, the Maps application zooms in to thecapital city of the country you are in based on theinformation the device receives from the cellularnetwork. At the same time, the map of the locationis downloaded, if it has not been downloadedduring previous sessions.To establish a GPS connection and zoom in to yourcurrent location, select Options > Find place >GPS position [0], or press 0A GPS indicator is shown on the displaywhen you browse maps. When the device tries toestablish a GPS connection, the circles are yellow.When the device receives enough data from thesatellites to calculate the coordinates of yourcurrent location, the circles turn green.To view information about satellites when you areusing Maps, select Options > Map options >Satellite info.Your current location is indicated on the map with.To move on the map, scrollup, down, left, or right.To zoom in or out, press *or #.To switch between the 2Dand 3D views, selectOptions > Mapoptions > 2D/3D.To find a location, selectOptions > Find place.You can choose to go toyour GPS position, find an address, find a point ofinterest by entering a keyword, find locationsnearby, or browse a guide (extra service).To use a location on the map, for example, as astarting point for a nearby search, to plan a route,view its details, or start navigation (extra service),press the scroll key, and select the desired option.When you browse the map on the display, forexample, move to another country, a new map isdownloaded automatically. These downloadedmaps are free of charge, but downloading mayinvolve the transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider.The maps are automatically saved in the devicememory. 65Positioning (GPS)Draft
To define what kinds of points of interest are shownon the map, select Options > Map options >Categories and the desired categories.To save a location as a landmark, in the desiredlocation, press the scroll key, select Save > Aslandmark, enter a name for the landmark, andselect the categories you want to include it in. Totake a screen shot of your location, select Save >As image. The screen shot is saved in Gallery. Tosend the screen shot, in Gallery, select the screenshot, and from the active toolbar.To view saved landmarks, select Options > Findplace > Landmarks.To send a landmark to a compatible device, in thelandmarks view, press the scroll key, and selectSend. If you send the landmark in a text message,the information is converted to plain text.To adjust the network, routing, and generalsettings, select Options > Settings.Satellite informationTo check how manysatellites your device hasfound, and whether yourdevice is receiving satellitesignals from the satellites,select Options > Mapoptions > Satellite info.If your device has foundsatellites, a bar for eachsatellite is shown in thesatellite info view. Thelonger the bar, thestronger the satellite signal. When your device hasreceived enough data from the satellite signal tocalculate the coordinates of your location, the barturns black.Initially your device must receive signals from atleast four satellites to be able to calculate thecoordinates of your location. When the initialcalculation has been made, it may be possible tocontinue calculating the coordinates of yourlocation with three satellites. However, theaccuracy is generally better when more satellitesare found.Download mapsWhen you browse the map on the display, forexample, move to another country, a new map is66Positioning (GPS)Draft
downloaded automatically. These downloadedmaps are free of charge, but downloading mayinvolve transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider.You can view the amount of transferred data fromthe data counter (kB) shown on the display. Thecounter shows the amount of network traffic whenyou browse maps, create routes, or search forlocations online.To prevent the device from automaticallydownloading maps through the internet, forexample, when you are outside your home cellularnetwork, select Options > Settings > Network >Use network > Never.To define how much of the mass memory you wantto use for saving maps data or voice guidance files,select Options > Settings > Network > Max.mass mem. use (%). When the memory is full, theoldest map data is deleted. The saved maps data canbe deleted using Nokia Map Loader PC software.Nokia Map LoaderNokia Map Loader is PC software that you can use todownload and install maps for different countriesto your device from the internet. You can also use itto download voice files for turn-by-turn navigation.To use Nokia Map Loader, you must first install it toa compatible PC. You can download the PC softwarefrom the internet at www.nokia.com/maps. Followthe instructions on the screen.You must use Nokia Maps before using Nokia MapLoader. Nokia Map Loader uses the Maps historyinformation to check the version of map data to bedownloaded.After you have installed the PC software to your PC,to download maps, do the following:1. Connect your device to the PC by using acompatible USB data cable. Select Massstorage as the USB connection mode.2. Open Nokia Map Loader in your PC. Nokia MapLoader checks the version of map data to bedownloaded.3. Select the maps or voice guidance files you want,and download and install them to your device.Find a placeTo view points of interest near your current locationor other locations on the map, select Options >Find place > Nearby and a category.To search for a point of interest by name, selectOptions > Find place > Keyword search or startentering the first letters of the name, and selectFind.To search for a location by address, selectOptions > Find place > By address. You mustenter the city and country. To use an address you 67Positioning (GPS)Draft
have saved to a contact card in Contacts, selectOptions > Find place > By address > Options >Select from contacts.To view a search result on the map, press the scrollkey, and select Show on map. To return to theresults list, select Back.To view a list of your previous locations, selectOptions > Find place > Recent.Plan a routeTo plan a route from one location to another (forexample, from your home to your office), do thefollowing:1. Scroll to a point on the map, press the scroll key,and select Route from.2. Scroll to From, and select Options > Select andthe desired option.To adjust the routing settings, such as the modeof transportation, select Options > Settings >Routing.3. To select the destination, scroll to To, and selectOptions > Select and the desired option.4. To view the route itinerary, select Options >Show route. The route is calculated using theselected routing settings.To view the itinerary route on the map, selectOptions > Show on map.To run a simulation of the route, select Options >Start simulation.Tip: You can also use a compatible GPSreceiver with Bluetooth connectivity withMaps. For example, in a car, an externalGPS receiver can be positioned so that ithas a clear view of the sky. Enable the useof an external GPS receiver in positioningsettings. See "Positioningsettings," p. 99.Extra services for Nokia MapsYou can purchase and download different kinds ofguides, such as city and travel guides, for differentcities to your device. You can also purchase a turn-by-turn navigation service with voice guidance touse it in Maps.The downloaded guides are automatically saved toyour device.The licence you purchase for a guide or navigationis device-specific and cannot be transferred fromyour device to another device.NavigationTo purchase a navigation service with voiceguidance to use in Maps, select Options > Extraservices > Add navigation.After purchasing the navigation upgrade, theservice is available through Maps.68Positioning (GPS)Draft
After creating a route in Maps, to start navigation tothe desired destination with GPS using voiceguidance, select Options > Start navigation. See"Plan a route," p. 68. You can also start navigationby selecting any location on the map or in a resultslist, and Navigate to.When you use navigation for the first time, you areprompted to select the language of the voiceguidance and download the voice guidance files ofthe selected language. You can also download voiceguidance files using Nokia Map Loader. See"Download maps," p. 66. To change the languagelater, in the Maps main view, select Options >Settings > General > Voice guidance and alanguage, and download the voice guidance filesfor the selected language.To discard the created route and use another route,select Options > Alternative route.To view only the next turns and hide the map, selectOptions > Map options > Next turns.To stop navigation, select Options > Stopnavigation.GuidesTo purchase and download different kinds ofguides, such as city and travel guides, for differentcities to your device, select Options > Extraservices > Guides.The guides provide information about attractions,restaurants, hotels, and other points of interest. Theguides must be downloaded and purchased beforeuse.To browse a downloaded guide, on the My guidestab in Guides, select a guide and a subcategory (ifavailable).To download a new guide to your device, in Guides,scroll right to the Nearest guides or All guides tab,select the desired guide, and press Yes. Thepurchase process starts automatically. You can payfor the guides through a credit card or have theamount charged to your phone bill (if supported byyour cellular network service provider).To confirm the purchase, select OK twice. To receivea confirmation of the purchase through e-mail,enter your name and e-mail address, and selectOK.GPS dataGPS data is designed to provide route guidanceinformation to a selected destination, positioninformation about your current location, andtraveling information, such as the approximatedistance to the destination and approximateduration of travel.Press , and select Tools > Connectivity > GPSdata.69Positioning (GPS)Draft
The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.To use GPS data, the GPS receiver of your devicemust initially receive position information from atleast four satellites to calculate the coordinates ofyour location. When the initial calculation has beenmade, it may be possible to continue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better whenmore satellites are found.For more information on GPS data, see the extendeduser guide on the product support pages of theNokia website.Retrieve position informationPress , and select Tools > Connectivity > GPSdata > Position.In the position view, you can view the positioninformation of your current location. An estimate ofthe accuracy of the location is displayed.To save your current location as a landmark, selectOptions > Save position. Landmarks are savedlocations with more information, and they can beused in other compatible applications andtransferred between compatible devices.Trip meterPress , and select Tools > Connectivity > GPSdata > Trip distance.Select Options > Start to activate trip distancecalculation, and Stop to deactivate it. Thecalculated values remain on the display. Use thisfeature outdoors to receive a better GPS signal.Select Reset to set the trip distance and time andaverage and maximum speeds to zero, and to starta new calculation. Select Restart to set theodometer and total time to zero.The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.70Positioning (GPS)Draft
Personalise your deviceYou can personalise your device by changing thestandby mode, main menu, tones, themes, or fontsize. Most of the personalisation options, such aschanging the font size, can be accessed through thedevice settings. See "Personalisationsettings," p. 96.For information on 3-D tones, see the extended userguide on the product support pages of the Nokiawebsite.ThemesPress , and select Tools > Settings >General > Personalisation > Themes.You can change the look of the display, such as thewallpaper and icons.To change the theme that is used for all theapplications in your device, select General.To preview a theme before activating it, selectOptions > Preview. To activate the theme, selectOptions > Set. The active theme is indicated by.To change the layout of the main menu, select Menuview.Important: Use only services that you trustand that offer adequate security and protectionagainst harmful software.To edit the wallpaper and power saver of thecurrent theme that appear in the standby mode,select Wallpaper to change the background imageor Power saver to change the power saver.Profiles—set tonesPress , and select Tools > Profiles.You can set and customise the ringing tones,message alert tones, and other tones for differentevents, environments, or caller groups.To change the profile, select a profile, andOptions > Activate. To also change the profile,press the power key in the standby mode. Scroll tothe profile you want to activate, and select OK.Tip: To switch between the general andsilent profiles in the standby mode, pressand hold #.To modify a profile, scroll to the profile, and selectOptions > Personalise.71Personalise your deviceDraft
If you want the caller’s name to be spoken whenyour device rings, select Options > Personalise,and set Say caller's name to On. The caller’s namemust be saved in Contacts.To create a new profile, select Options > Createnew.Modify the standby modeTo switch the active standby on or off, press , andselect Tools > Settings > General >Personalisation > Standby mode > Activestandby. The active standby display showsapplication shortcuts, and events from applicationssuch as calendar and player.To change the defaultshortcut icons in the activestandby mode, selectTools > Settings >General >Personalisation >Standby mode > Activestandby apps.. Someshortcuts may be fixed,and you cannot changethem.To change the clock shownin the standby mode, press , and selectApplications > Clock > Options > Settings >Clock type. You can also change the standby mode backgroundimage or what is shown in the screen saver. See"Personalisation settings," p. 96.Modify the main menuTo change the main menu view, in the main menu,select Options > Change Menu view > Grid orList.To rearrange the main menu, in the main menu,select Options > Move, Move to folder, or Newfolder. You can move less used applications intofolders and place applications that you use moreoften into the main menu.To use animated icons in your device, in the mainmenu, select Options > Icon animation > On.72Personalise your deviceDraft
Time managementClock Alarm clockPress , and select Applications > Clock.To set a new quick alarm, select Options > Newquick alarm. Quick alarms are set for the next 24hours and they cannot be repeated.To view your active and inactive alarms, scroll rightto the alarm tab. To set a new alarm, selectOptions > New alarm. Define the repetition, ifneeded. When an alarm is active, is shown.To turn off the sounding alarm, select Stop. To stopthe alarm for 5 minutes, select Snooze.If the alarm time is reached while the device isswitched off, the device switches itself on and startssounding the alarm tone. If you select Stop, thedevice asks whether you want to activate the devicefor calls. Select No to switch off the device or Yes tomake and receive calls. Do not select Yes whenwireless phone use may cause interference ordanger.To cancel an alarm, select Options > Removealarm.To change the time, date, and clock type settings,select Options > Settings.To allow the mobile phone network to update thetime, date, and time zone information to yourdevice (network service), in the settings, selectNetwork operator time > Auto-update.World clockPress , and select Applications > Clock.To open the world clock view, scroll right to theworld clock tab. In the world clock view, you canview the time in different cities. To add cities to thelist, select Options > Add city. You can add amaximum of 15 cities to the list.To set your current city, scroll to a city, and selectOptions > Set as current city. The city is displayedin the clock main view, and the time in your deviceis changed according to the city selected. Ensurethat the time is correct and matches your time zone.CalendarFor more information, see the extended user guideon the product support pages of the Nokia website.73Time managementDraft
Create a calendar entryPress , and select Applications > Calendar.1. To add a new calendarentry, scroll to thedesired date, and selectOptions > Newentry and one of thefollowing:●Meeting — toremind you of anappointment thathas a specific dateand time●Meetingrequest — to create and send a new meetingrequest. You must have a mailbox set up forsending requests. See "Managemailboxes," p. 81.●Memo — to write a general entry for a day●Anniversary — to remind you of birthdays orspecial dates (entries are repeated annually)●To-do — to remind you of a task that must bedone by a specific date2. Fill in the fields. To set an alarm, select Alarm >On, and enter the alarm time and date.To add a description for an entry, selectOptions > Add description.3. To save the entry, select Done.Tip: In the day, week, or month calendarview, press any key (1-0). An appointmententry opens, and the characters you enterare added to the subject field. In the to-doview, a to-do note entry opens.When the calendar alarm sounds for a note, selectSilence to turn off the calendar alarm tone. Thereminder text stays on the screen. To stop thecalendar alarm, select Stop. To set the alarm tosnooze, select Snooze.Calendar viewsTo change the starting day of the week or the viewthat is shown when you open the calendar, selectOptions > Settings.To go to a certain date, select Options > Go todate. To jump to today, press #.To switch between the month view, week view, dayview, and to-do view, press *.To send a calendar note to a compatible device,select Options > Send.If the other device is not compatible withCoordinated Universal Time (UTC), the timeinformation of received calendar entries may not bedisplayed correctly.To modify the calendar, select Options >Settings > Calendar alarm tone, Default view,Week starts on, or Week view title.74Time managementDraft
MessagingOnly devices that have compatible features canreceive and display multimedia messages. Theappearance of a message may vary depending onthe receiving device.For more information on messaging, see theextended user guide on the product support pagesof the Nokia website.Messaging main viewPress , and select Messaging (network service).To create a new message, select New message.Messaging contains the following folders:● Inbox — Received messages, except e-mailand cell broadcast messages, are stored here.● My folders — Organise your messages intofolders.Tip: To avoid rewriting messages that yousend often, use texts in the Templatesfolder in My folders. You can also createand save your own templates.● Mailbox — Connect to your remote mailboxto retrieve your new e-mail messages, or viewyour previously retrieved e-mail messagesoffline.● Drafts — Draft messages that have not beensent are stored here.● Sent — The last messages that have beensent, excluding messages sent using Bluetoothconnectivity or infrared, are stored here. You canchange the number of messages to save in thisfolder.● Outbox — Messages waiting to be sent aretemporarily stored in the outbox, for example,when your device is outside network coverage.● Reports — You can request the network tosend you a delivery report of the text messagesand multimedia messages you have sent(network service).Write and send messagesPress , and select Messaging.Before you can create a multimedia message orwrite an e-mail, you must have the correctconnection settings in place. See "Define the e-mailsettings," p. 78.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limit,the device may make it smaller so that it can be sentby MMS. 75MessagingDraft
Check the size limit of e-mail messages with yourservice provider. If you attempt to send an e-mailmessage that exceeds the size limit of the e-mailserver, the message is left in the Outbox folder, andthe device attempts to resend it periodically.Sending an e-mail requires a data connection, andcontinuous attemps to resend the e-mail mayincrease your phone bill. In the Outbox folder, youcan delete such a message or move it to theDrafts folder.1. Select New message > Text message to senda text message, Multimedia message to send amultimedia message (MMS), Audio message tosend an audio message (a multimedia messagethat includes one sound clip), or E-mail to sendan e-mail.2. In the To field, press thescroll key to selectrecipients or groupsfrom contacts, or enterthe recipient’s phonenumber or e-mailaddress. To add asemicolon (;) thatseparates therecipients, press *. Youcan also copy and pastethe number or addressfrom the clipboard.3. In the Subject field, enter the subject of themultimedia message or e-mail. To change thefields that are visible, select Options > Addressfields.4. In the message field, write the message. Toinsert a template, select Options > Insert orInsert object > Template.5. To add a media object to a multimedia message,select Options > Insert object > Image,Sound clip, or Video clip.6. To take a new picture or record sound or videofor a multimedia message, select Insert new >Image, Sound clip, or Video clip.To insert a new slide to the message, selectSlide.To see what the multimedia message looks like,select Options > Preview.7. To add an attachment to an e-mail, selectOptions > Insert > Image, Sound clip, Videoclip, Note, or Other for other file types. E-mailattachments are indicated by .8. To send the message, select Options > Send,or press the call key.Note: Your device may indicate that yourmessage was sent to the message center numberprogrammed into your device. Your device may notindicate whether the message is received at the76MessagingDraft
intended destination. For more details aboutmessaging services, contact your service provider.Your device supports the sending of text messagesbeyond the character limit for a single message.Longer messages are sent as a series of two or moremessages. Your service provider may chargeaccordingly. Characters that use accents or othermarks, and characters from some language options,take up more space, limiting the number ofcharacters that can be sent in a single message.You may not be able to send video clips that aresaved in the .mp4 format or that exceed the sizelimit of the wireless network in a multimediamessage. You can edit video clips that exceed themaximum size for sending.Tip: You can combine images, video,sound, and text to a presentation andsend it in a multimedia message. Start tocreate a multimedia message, and selectOptions > Create presentation. Theoption is shown only if MMS creationmode is set to Guided or Free. See"Multimedia message settings," p. 80.Messaging inboxReceive messagesPress , and select Messaging > Inbox.In the Inbox folder, indicates an unread textmessage, an unread multimedia message, anunread audio message, data received throughinfrared, and data received through Bluetoothconnectivity.When you receive a message, and 1 newmessage are shown in the standby mode. To openthe message, select Show. To open a message inInbox, scroll to it, and press the scroll key. To replyto a received message, select Options > Reply.Multimedia messagesImportant: Exercise caution when openingmessages. Multimedia message objects maycontain malicious software or otherwise be harmfulto your device or PC.You may receive a notification that a multimediamessage is waiting in the multimedia messagecentre. To start a packet data connection to retrievethe message to your device, select Options >Retrieve.When you open a multimedia message ( ), youmay see an image and a message. is shown ifsound is included, or if video is included. To playthe sound or the video, select the indicator.77MessagingDraft
To see the media objects that have been includedin the multimedia message, select Options >Objects.If the message includes a multimedia presentation, is displayed. To play the presentation, select theindicator.MailboxDefine the e-mail settingsTip: Use Settings wizard to define yourmailbox settings. Press , and selectTools > Utilities > Sett. wizard.To use e-mail, you must have a valid internet accesspoint (IAP) in the device and define your e-mailsettings correctly. See "Access points," p. 102. See"E-mail settings," p. 81.You must have a separate e-mail account. Followthe instructions given by your remote mailbox andinternet service provider (ISP).If you select Mailbox in the Messaging main viewand have not set up your e-mail account, you areprompted to do so. To start creating the e-mailsettings with the mailbox guide, select Start.When you create a new mailbox, the name you giveto the mailbox replaces Mailbox in the Messagingmain view. You can have up to six mailboxes.Open the mailboxPress , and select Messaging and a mailbox.When you open the mailbox, the device asks if youwant to connect to the mailbox (Connect tomailbox?).To connect to your mailbox and retrieve new e-mailheadings or messages, select Yes. When you viewmessages online, you are continuously connectedto a remote mailbox using a data connection.To view previously retrieved e-mail messagesoffline, select No.To create a new e-mail message, select Newmessage > E-mail in the Messaging main view orOptions > Create message > E-mail in yourmailbox. See "Write and send messages," p. 75.Retrieve e-mail messagesPress , and select Messaging and a mailbox.If you are offline, select Options > Connect to starta connection to the remote mailbox.Important: Exercise caution when openingmessages. E-mail messages may contain malicioussoftware or otherwise be harmful to your device orPC.1. When you have an open connection to a remotemailbox, select Options > Retrieve e-mail >New to retrieve all new messages, Selected to78MessagingDraft
retrieve only the messages that have beenmarked, or All to retrieve all messages from themailbox.To stop retrieving messages, select Cancel.2. To close the connection and view the e-mailmessages offline, select Options >Disconnect.3. To open an e-mail message, press the scroll key.If the e-mail message has not been retrieved andyou are offline, you are asked if you want toretrieve this message from the mailbox.To view e-mail attachments, open the message, andselect the attachment field indicated by . If theattachment has a dimmed indicator, it has not beenretrieved to the device; select Options >Retrieve.To retrieve e-mail messages automatically, selectOptions > E-mail settings > Automaticretrieval. See "Automatic retrievalsettings," p. 83.Setting the device to retrieve e-mail automaticallymay involve the transmission of large amounts ofdata through your service provider's network.Contact your service provider for information aboutdata transmission charges.Delete e-mail messagesPress , and select Messaging and a mailbox.To delete the contents of an e-mail message fromthe device while still retaining it in the remotemailbox, select Options > Delete. In Deletemessage from:, select Phone only.The device mirrors the e-mail headings in theremote mailbox. Although you delete the messagecontent, the e-mail heading stays in your device. Ifyou want to remove the heading as well, you mustfirst delete the e-mail message from your remotemailbox, then make a connection from your deviceto the remote mailbox again to update the status.To delete an e-mail from the device and the remotemailbox, select Options > Delete > Phone andserver.To cancel deleting an e-mail from the device andserver, scroll to an e-mail that has been marked tobe deleted during the next connection , andselect Options > Restore.Disconnect from the mailboxWhen you are online, to end the data connection tothe remote mailbox, select Options >Disconnect.Messaging settingsThe settings may be preconfigured in your device,or you may receive them in a message. To enter79MessagingDraft
settings manually, fill in all fields marked with Mustbe defined or an asterisk.Some or all message centres or access points maybe preset for your device by your service provider,and you may not be able to change, create, edit, orremove them.Text message settingsPress , and select Messaging > Options >Settings > Text message.Select from the following:●Message centres — View a list of all textmessage centres that have been defined.●Message centre in use — Select which messagecentre to use to deliver text messages.●Character encoding — To use characterconversion to another encoding system whenavailable, select Reduced support.●Receive report — Select whether the networksends delivery reports on your messages(network service).●Message validity — Select how long themessage centre resends your message if the firstattempt fails (network service). If the messagecannot be sent within the validity period, themessage is deleted from the message centre.●Message sent as — Contact your serviceprovider to learn if your message centre is ableto convert text messages into these otherformats.●Preferred connection — Select the connectionto use.●Reply via same centre — Select whether youwant the reply message to be sent using thesame text message centre number (networkservice).Multimedia message settingsPress , and select Messaging > Options >Settings > Multimedia message.Select from the following:●Image size — Define the size of the image in amultimedia message.●MMS creation mode — If you select Guided, thedevice informs you if you try to send a messagethat may not be supported by the recipient. If youselect Restricted, the device prevents you fromsending messages that may not be supported. Toinclude content in your messages withoutnotifications, select Free.●Access point in use — Select which access pointis used as the preferred connection.●Multimedia retrieval — Select how you wantto receive messages. To receive messagesautomatically in your home cellular network,select Auto in home netw.. Outside your homecellular network, you receive a notification that80MessagingDraft
there is a message to retrieve in the multimediamessage centre.Outside your home cellular network, sending andreceiving multimedia messages may cost you more.If you select Multimedia retrieval > Alwaysautomatic, your device automatically makes anactive packet data connection to retrieve themessage both in and outside your home cellularnetwork.●Allow anon. msgs. — Select whether you wantto reject messages from an anonymous sender.●Receive adverts — Define whether you want toreceive multimedia message advertisements.●Receive report — Select whether you want thestatus of the sent message to be shown in the log(network service).●Deny report sending — Select whether youwant to deny your device sending deliveryreports of received messages.●Message validity — Select how long themessage centre resends your message if the firstattempt fails (network service). If the messagecannot be sent within the validity period, themessage is deleted from the message centre.E-mail settingsManage mailboxesPress , and select Messaging > Options >Settings > E-mail.To select which mailbox you want to use to send e-mail, select Mailbox in use and a mailbox.To remove a mailbox and its messages from yourdevice, select Mailboxes, scroll to the desiredmailbox, and press C.To create a new mailbox, in Mailboxes, selectOptions > New mailbox. The name you give tothe new mailbox replaces Mailbox in the Messagingmain view. You can have up to six mailboxes.Select Mailboxes and a mailbox to change theconnection settings, user settings, retrievalsettings, and automatic retrieval settings.Connection settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andConnection settings.To edit the settings for the e-mail you receive, selectIncoming e-mail, and from the following:●User name — Enter your user name given to youby your service provider.●Password — Enter your password. If you leavethis field blank, you are prompted for thepassword when you try to connect to yourremote mailbox.●Incoming mail server — Enter the IP addressor host name of the mail server that receives youre-mail.81MessagingDraft
●Access point in use — Select an internet accesspoint (IAP). See "Access points," p. 102.●Mailbox name — Enter a name for the mailbox.●Mailbox type — Defines the e-mail protocol thatyour remote mailbox service providerrecommends. The options are POP3 and IMAP4.This setting cannot be changed.●Security (ports) — Select the security optionused to secure the connection to the remotemailbox.●Port — Define a port for the connection.●APOP secure login (for POP3 only) — Use withthe POP3 protocol to encrypt the sending ofpasswords to the remote e-mail server whileconnecting to the mailbox.To edit the settings for the e-mail you send, selectOutgoing e-mail and from the following:●My e-mail address — Enter the e-mail addressgiven to you by your service provider.●Outgoing mail server — Enter the IP address orhost name of the mail server that sends your e-mail. You may only be able to use the outgoingserver of your service provider. Contact yourservice provider for more information.The settings for User name, Password, Accesspoint in use, Security (ports), and Port are similarto the ones in Incoming e-mail.User settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andUser settings.Select from the following:●My name — Enter your own name. Your namereplaces your e-mail address in the recipient’sdevice when the recipient’s device supports thisfunction.●Send message — Define how e-mail is sent fromyour device. Select Immediately for the deviceto connect to the mailbox when you select Sendmessage. If you select During next conn., e-mail is sent when the connection to the remotemailbox is available.●Send copy to self — Select whether you wantto send a copy of the e-mail to your own mailbox.●Include signature — Select whether you wantto attach a signature to your e-mail messages.●New e-mail alerts — Select whether you wantto receive the new e-mail indications (a tone, anote, and a mail indicator) when new mail isreceived.Retrieval settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andRetrieval settings.Select from the following:82MessagingDraft
●E-mail to retrieve — Define which parts of thee-mail are retrieved: Headers only, Size limit(POP3), or Msgs. & attachs. (POP3).●Retrieval amount — Define how many new e-mail messages are retrieved to the mailbox.●IMAP4 folder path (for IMAP4 only) — Definethe folder path for folders to be subscribed.●Folder subscriptions (for IMAP4 only) — Subscribe to other folders in the remotemailbox, and retrieve content from those folders.Automatic retrieval settingsPress , and select Messaging > Options >Settings > E-mail > Mailboxes, a mailbox, andAutomatic retrieval.Select from the following:●E-mail notifications — To automaticallyretrieve the headings to your device when youreceive new e-mail in your remote mailbox,select Auto-update or Only in home netw..●E-mail retrieval — To automatically retrieve theheadings of new e-mail messages from yourremote mailbox at defined times, selectEnabled or Only in home netw.. Define whenand how often the messages are retrieved.E-mail notifications and E-mail retrieval cannotbe active at the same time.Setting the device to retrieve e-mail automaticallymay involve the transmission of large amounts ofdata through your service provider's network.Contact your service provider for information aboutdata transmission charges.Other settingsPress , and select Messaging > Options >Settings > Other.Select from the following:●Save sent messages — Select whether youwant to save a copy of the text messages,multimedia messages, or e-mail that you send tothe Sent folder.●Number of saved msgs. — Define how manysent messages are saved to the sent folder at atime. When the limit is reached, the oldestmessage is deleted.●Memory in use — Select the memory where youwant to save your messages.83MessagingDraft
Make callsFor information on conference calls, speed dialling,voice dialling, call waiting, and options during calls,see the extended user guide on the product supportpages of the Nokia website. Video sharing is alsoexplained in the extended user guide.Voice calls1. In the standby mode, enter the phone number,including the area code. To remove a number,press C.For international calls, press * twice for the +character (replaces the international accesscode), and enter the country code, area code(omit the leading zero if necessary), and phonenumber.2. Press the call key to call the number.3. Press the end key to end the call (or to cancel thecall attempt).Pressing the end key always ends a call, even ifanother application is active.To make a call from Contacts, press , and selectContacts. Scroll to the desired name, or enter thefirst letters of the name to the search field. Matchingcontacts are listed. To call, press the call key. If youhave saved several numbers for a contact, select thedesired number from the list.Voice and video mailboxesTo call your voice or video mailbox (networkservices, video mailbox available only in the UMTSnetwork), press and hold 1 in the standby mode,and select Voice mailbox or Video mailbox.To change the phone number of your voice or videomailbox, press , and select Tools > Callmailbox, a mailbox, and Options > Changenumber. Enter the number (obtained from yourwireless service provider), and select OK.Answer or decline a callTo answer the call, press the call key, or open theslide.To mute the ringing tone of an incoming call, selectSilence. If you do not want to answer a call, press the endkey. If you activate the Call divert > If busyfunction in phone settings to forward calls,declining an incoming call also forwards the call.84Make callsDraft
When you select Silence to mute the ringing toneof an incoming call, you can send a text messagewithout rejecting the call, informing the caller thatyou cannot answer the call. Select Options > Sendtext message. To set up this option and write astandard text message, select Tools > Settings >Phone > Call > Reject call with SMS.Make a video callWhen you make a video call (network service), youcan see a real-time, two-way video between youand the recipient of the call. The live video image,or video image captured by the camera in yourdevice is shown to the video call recipient.To be able to make a video call, you must have aUSIM card and be in the coverage of a UMTS network.For availability of and subscription to video callservices, contact your network service provider.A video call can only be made between two parties.The video call can be made to a compatible mobiledevice or an ISDN client. Video calls cannot be madewhile another voice, video, or data call is active.Icons You are not receiving video (the recipient is notsending video or the network is not transmitting it). You have denied video sending from yourdevice. To send a still image instead, select Tools >Settings > Phone > Call > Image in videocall.Even if you denied video sending during a video call,the call is still charged as a video call. Check thepricing with your service provider.1. To start a video call, enter the phone number inthe standby mode, or select Contacts and acontact.2. Select Options > Call > Video call.The secondary camera on the front is used bydefault for video calls. Starting a video call maytake a while. Waiting for video image isshown. If the call is not successful (for example,video calls are not supported by the network, orthe receiving device is not compatible), you areasked if you want to try a normal call or send atext or multimedia message instead.The video call is active when you see two videoimages, and hear the sound through theloudspeaker. The call recipient may deny videosending ( ), in which case you only hear thesound and may see a still image or a greybackground graphic.3. To end the video call, press the end key.85Make callsDraft
Answer or decline a videocallWhen a video call arrives, is displayed.To answer the video call, press the call key. Allowvideo image to be sent to caller? is displayed. Tostart sending live video image, select Yes.If you do not activate the video call, video sendingis not activated, and you only hear the sound of thecaller. A grey screen replaces the video image. Toreplace the grey screen with a still image capturedby the camera in your device, select Tools >Settings > Phone > Call > Image in videocall.To end the video call, press the end key.Internet callsWith the internet call service (network service), youcan make and receive calls over the internet.Internet calls can be established betweencomputers, between mobile phones, and betweena VoIP device and a traditional telephone. To makeor receive an internet call, your device must beconnected to an internet call service.To connect to an internet call service, your devicemust be in the coverage of a connection network,such as a WLAN access point.Your device supports voice calls over the internet(net calls). Your device attempts emergency callsprimarily over cellular networks. If an emergencycall using cellular networks is not successful, yourdevice attempts an emergency call through your netcall provider. Due to the established nature ofcellular telephony, you should use cellular networksfor emergency calls, if possible. If you have cellularnetwork coverage available, make sure that yourcellular phone is switched on and ready to makecalls before you attempt an emergency call. Thecapability for an emergency call using internettelephony depends on the availability of a WLANnetwork and your net call provider'simplementation of emergency call capabilities.Contact your net call provider to check the internettelephony emergency call capability.Create an internet call profileBefore you can make internet calls, you must createan internet call profile.1. Press , select Tools > Settings >Connection > SIP settings > Options > NewSIP profile, and enter the required information.Ensure that Registration is set to Always on.Contact your internet call provider for the correctsettings.2. Select Proxy server > Transport type >Auto.86Make callsDraft
3. Select Back until you return to the main view ofconnection settings.4. Select Internet tel. > Options > Newprofile. Enter a name for the profile, and selectthe SIP profile you just created.To use the created profile for connecting to theinternet call service automatically, press , andselect Tools > Connectivity > Internet tel. >Preferred profile.To log in to the internet call service manually, selectRegistration > When needed, and Transporttype > UDP or TCP in the SIP settings whencreating an internet call profile.Connect to the internet callserviceTo make or receive an internet call, your device mustbe connected to an internet call service. If you haveselected automatic login, your device automaticallyconnects to the internet call service. If you log in tothe service manually, select an available networkfrom the list and Select.When you are connected to an internet call service, is shown in the standby mode.The list of networks is refreshed automatically every15 seconds. To refresh the list manually, selectOptions > Refresh. Use this option if your WLANaccess point is not shown.To select an internet call service for outgoing callsif the device is connected to more than one service,select Options > Change service.To configure new services, select Options >Configure service. This option is shown only ifthere are services that have not been configured.To save the network to which you are currentlyconnected, select Options > Save network. Thesaved networks are marked with a star in the list ofnetworks.To connect to an internet call service using a hiddenWLAN, select Options > Use hidden network.To end the connection to an internet call service,select Options > Disconnect from serv..Make internet callsWhen you have activated the internet call feature,you can make an internet call from all applicationswhere you can make a regular voice call. Forexample, in Contacts, scroll to the desired contact,and select Call > Options > Internet call.To make an internet call in the standby mode, enterthe phone number or internet address, and pressthe call key.To make an internet call to an address that does notstart with a digit, press any number key when thedevice is in the standby mode, then press # for afew seconds to clear the display and to switch the 87Make callsDraft
device from the number mode to the letter mode.Enter the address, and press the call key.To make an internet call from Contacts, press ,select Contacts, scroll to the desired contact, andselect Options > Internet call.To make an internet call from the log, press ,select Tools > Log and the log type, scroll to thedesired contact, and select Options > Internetcall.Service settingsPress , select Tools > Connectivity > Internettel. > Options > Settings, and select the defaultsettings or service-specific settings.To set internet call as the preferred call type for alloutgoing calls, select Default call type > Internetcall. When your device is connected to an internetcall service, all calls are made as internet calls.To log in automatically to the internet call service,select Login type > Automatic. If you use theautomatic login type for WLANs, the deviceperiodically scans for WLANs, which increases thedemand on battery power and reduces the batterylife.To log in manually to the internet call service, selectLogin type > Manual.To view the networks you have saved for theinternet call service and the networks detected bythe internet call service, select Saved conn.networks.To define the service-specific settings, select Editservice settings. This option is only available if aservice-specific software plug-in has been installedin the device.LogThe log stores information about thecommunication history of the device. The deviceregisters missed and received calls only if thenetwork supports these functions, the device isswitched on, and within the network service area.For more information on Log, see the extended userguide on the product support pages of the Nokiawebsite.Recent callsPress , and select Tools > Log.To monitor the phone numbers of missed, received,and dialled voice calls, select Recent calls. Thedevice registers missed and received calls only if thenetwork supports these functions, the device isswitched on, and within the network service area.To clear all recent call lists, select Options > Clearrecent calls in the recent calls main view. To clearone of the call registers, open the register you wantto erase, and select Options > Clear list. To clear88Make callsDraft
an individual event, open a register, scroll to theevent, and press C.Call durationPress , and select Tools > Log.To monitor the approximate duration of yourincoming and outgoing calls, select Call duration.Note: The actual time invoiced for calls byyour service provider may vary, depending onnetwork features, rounding off for billing, and soforth.To clear call duration timers, select Options >Clear timers. For this you need the lock code.89Make callsDraft
Contacts (phonebook)In Contacts, you can save and update contactinformation, such as phone numbers, homeaddresses, or e-mail addresses of your contacts. Youcan add a personal ringing tone or a thumbnailimage to a contact card. You can also create contactgroups, which allow you to send text messages ore-mail to many recipients at the same time.For more information on Contacts and SIM contacts,see the extended user guide on the product supportpages of the Nokia website.Save and edit names andnumbers1. Press , and select Contacts > Options >New contact.2. Fill in the fields that you want, and select Done.To edit contact cards, scroll to the contact card youwant to edit, and select Options > Edit. You canalso search for the desired contact by entering thefirst letters of the name to the search field. A list ofthe contacts starting with the letters appear on thedisplay.Tip: To add and edit contact cards, you canalso use Nokia Contacts Editor available inNokia Nseries PC Suite.To attach a small thumbnail image to a contact card,open the contact card, and select Options > Edit >Options > Add thumbnail. The thumbnail imageis shown when the contact calls. Add ringing tones forcontactsPress , and select Contacts.To define a ringing tone for a contact or a contactgroup, do the following:1. Press the scroll key to open a contact card or goto the groups list, and select a contact group.2. Select Options > Ringing tone. A list of ringingtones opens.3. Select the ringing tone you want to use for theindividual contact or the members of theselected group.When a contact or group member calls you, thedevice plays the chosen ringing tone (if the caller’s90Contacts (phonebook)Draft
telephone number is sent with the call and yourdevice recognises it).To remove the ringing tone, select Default tonefrom the list of ringing tones.Copy contactsTo copy names and numbers from a SIM card to yourdevice, press , and select Contacts > Options >SIM contacts > SIM directory, the names youwant to copy, and Options > Copy to Contacts.To copy contacts to your SIM card, in Contacts, selectthe names you want to copy and Options > Copyto SIM directory, or Options > Copy > To SIMdirectory. Only the contact card fields supported byyour SIM card are copied.91Contacts (phonebook)Draft
Applications folderCalculatorPress , and select Applications > Calculator.Note: This calculator has limited accuracyand is designed for simple calculations.To make a calculation, enter the first number of thecalculation. Select a function such as add or subtractfrom the function map. Enter the second number ofthe calculation, and select =.Application managerWith Application manager, you can see the softwarepackages installed in your device. You can viewdetails of installed applications, removeapplications, and define installation settings.Press , and select Applications > App. mgr..You can install two types of applications andsoftware to your device:●J2ME applications based on Java technology withthe extension .jad or .jar●Other applications and software suitable for theSymbian operating system with theextension .sis or .sisxOnly install software specifically designed for yourdevice: Nokia N95 8GB. Software providers willoften refer to the official model number of thisproduct: Nokia N95-2.For application manager settings, see the extendeduser guide on the product support pages of theNokia website.Install applications and softwareInstallation files may be transferred to your devicefrom a compatible computer, downloaded duringbrowsing, or sent to you in a multimedia messageas an e-mail attachment or using other connectivitymethods, such as Bluetooth connectivity. You canuse Nokia Application Installer in Nokia Nseries PCSuite to install an application to your device. indicates a .sis or .sisx application, a Javaapplication, that the application is not fullyinstalled, and that the application is installed inthe mass memory.Important: Only install and use applicationsand other software from trusted sources, such asapplications that are Symbian Signed or havepassed the Java VerifiedTM testing.92Applications folderDraft
Before installation, note the following:●To view the application type, version number,and the supplier or manufacturer of theapplication, select Options > View details.To display the security certificate details of theapplication, in Details:, scroll to Certificates,and select View details. See "Certificatemanagement," p. 98.●If you install a file that contains an update orrepair to an existing application, you can onlyrestore the original application if you have theoriginal installation file or a full backup copy ofthe removed software package. To restore theoriginal application, remove the application, andinstall the application again from the originalinstallation file or the backup copy.The .jar file is required for installing Javaapplications. If it is missing, the device may askyou to download it. If there is no access pointdefined for the application, you are asked toselect one. When you are downloading the .jarfile, you may need to enter a user name andpassword to access the server. You obtain thesefrom the supplier or manufacturer of theapplication.To install an application or software, do thefollowing:1. To locate an installation file, press , and selectApplications > App. mgr.. Alternatively,search the memory in File manager, or open amessage in Messaging > Inbox that containsan installation file.2. In Application manager, select Options >Install. In other applications, scroll to theinstallation file, and select it to start theinstallation.You cannot cancel the installation after you havestarted it.During installation, the device showsinformation about the progress of theinstallation. If you install an application withouta digital signature or certification, the devicedisplays a warning. Continue installation only ifyou are sure of the origin and contents of theapplication.To start an installed application, locate it in themenu, and select it. If the application does not havea default folder defined, it is installed in theApplications folder in the main menu.To see which software packages are installed orremoved and when, select Options > View log.Important: Your device can only support oneantivirus application. Having more than oneapplication with antivirus functionality could affectperformance and operation or cause the device tostop functioning.93Applications folderDraft
After you install applications to mass memory,installation files (.sis or .sisx) remain in the devicememory. The files may use large amounts ofmemory and prevent you from storing other files.To maintain sufficient memory, use Nokia NseriesPC Suite to back up installation files to a compatiblePC, then use the file manager to remove theinstallation files from the device memory. If the .sisfile is a message attachment, delete the messagefrom the Messaging inbox.See "File manager," p. 95.Remove applications andsoftwarePress , and select Applications > App. mgr..Scroll to a software package, and select Options >Remove. Select Yes to confirm.If you remove software, you can only reinstall it ifyou have the original software package or a fullbackup of the removed software package. If youremove a software package, you may no longer beable to open documents created with that software.If another software package depends on thesoftware package that you removed, the othersoftware package may stop working. Refer to thedocumentation of the installed software packagefor details.94Applications folderDraft
Tools folderFor information on Voice commands, Devicemanager, and synchronisation, see the extendeduser guide on the product support pages of theNokia website.File managerPress , and select Tools > File mgr..With File manager, you can browse files and foldersin the device memory or mass memory. When youopen File manager, the device memory view ( )opens. Scroll right to open the mass memory view( ).To view what types of data you have in the deviceand how much memory the different data typesconsume, select Options > Memory details. Theamount of available memory is shown in Freememory.To find a file, select Options > Find and thememory from which to search. Enter a search textthat matches the file name.To mark several files, press and hold while youpress the scroll key, or scroll up or down. To moveor copy the files to a folder, select Options > Moveto folder or Copy to folder.Mass memory toolYour device has an 8 GB internal memory providinghigh-capacity storage for different kind of files.To monitor the amount of used and free space inthe device mass memory, press , and selectTools > Utilities > Memory. To see how muchmemory the different applications and data typesuse, select Options > Memory details.To change the name of the mass memory, selectOptions > Memory card name.To back up information from the device memory tothe mass memory, select Options > Back upphone memory.To restore information from the mass memory tothe device memory, select Options > Rest. frommass mem..For information on formatting mass memory, seethe extended user guide on the product supportpages of the Nokia website.95Tools folderDraft
SettingsSome settings may be preset for the device by yourservice provider, and you may not be able to changethem.For information on application settings, see theextended user guide on the product support pagesof the Nokia website.General settingsIn general settings, you can edit the generalsettings of your device or restore the device tooriginal default settings.You can adjust time and date settings also in theclock. See "Clock ," p. 73.Personalisation settingsPress , and select Tools > Settings >General > Personalisation.Themes opens the Themes application.You can edit settings related to the display, standbymode, and general functions of your device.Voice comms. opens the settings for the Voicecommands application.Tones allows you to change the tones of thecalendar, clock, and currently active profile.Display●Light sensor — Scroll left or right to adjust thelight sensor that observes the lighting conditionsand adjusts the brightness of the display. Thelight sensor may cause the display to flicker inlow light. ●Font size — Adjust the size of the text and iconson the display. ●Power saver time-out — Select the time-outperiod after which the power saver is activated. ●Welcome note / logo — The welcome note orlogo is displayed briefly each time you switch onthe device. Select Default to use the defaultimage, Text to write a welcome note, or Imageto select an image from Gallery. ●Light time-out — Select a time-out after whichthe backlight of the display is switched off. Standby mode●Active standby — Activate shortcuts toapplications in the standby mode. ●Shortcuts — Assign a shortcut to the selectionkeys in the standby mode.You can also assign keypad shortcuts for thedifferent presses of the scroll key. The scroll keyshortcuts are not available if the active standbyis on.96SettingsDraft
●Active standby apps. — Select the applicationshortcuts you want to appear in the activestandby. This setting is only available if the activestandby is on. ●Operator logo — This setting is only availableif you have received and saved an operator logo.Select Off if you do not want the logo to beshown. LanguageChanging the settings for the phone language orwriting language affects every application in yourdevice, and the change remains effective until youchange these settings again.●Phone language — Change the language of thedisplay text in your device. This also affects theformat used for date and time and the separatorsused, for example, in calculations. Automaticselects the language according to theinformation on your SIM card. After you changethe display text language, the device restarts.●Writing language — Change the writinglanguage. This affects the characters availablewhen writing text and the predictive textdictionary used.●Predictive text — Set predictive text input onor off for all editors in the device. The predictivetext dictionary is not available for all languages.Enhancement settingsPress , and select Tools > Settings >General > Enhancement.Some enhancement connectors indicate which typeof enhancement is connected to the device. See"Display indicators," p. 17.The available settings depend on the type ofenhancement. Select an enhancement and from thefollowing:●Default profile — Set the profile that you wantactivated each time you connect a certaincompatible enhancement to your device.●Automatic answer — Select whether you wantthe device to answer an incoming callautomatically after 5 seconds. If the ringing typeis set to Beep once or Silent, automatic answeris disabled.●Lights — Set whether lights remain on or areswitched off after the time-out. This setting is notavailable for all enhancements.TV-out settingsTo change the settings for a TV-out connection,select TV-Out and from the following:●Default profile — Set the profile that you wantactivated each time you connect a Nokia VideoConnectivity Cable to your device.●TV screen size — Select the aspect ratio of theTV: Normal or Widescreen for widescreen TVs. 97SettingsDraft
●TV system — Select the analogue video signalsystem that is compatible with your TV.●Flicker filter — To improve image quality on thescreen of your TV, select On. The flicker filter maynot diminish image flicker on all TV screens.Security settingsFor security module settings, see the extended userguide on the product support pages of the Nokiawebsite.Phone and SIMPress , and select Tools > Settings >General > Security > Phone and SIM card.●PIN code request — When active, the code isrequested each time the device is switched on.Deactivating the PIN code request may not beallowed by some SIM cards.●PIN code, PIN2 code, and Lock code — You canchange the lock code, PIN code, and PIN2 code.These codes can only include the numbers from0 to 9. If you forget any of these codes, contactyour service provider. See "Access codes," p. 13.Avoid using access codes similar to theemergency numbers to prevent accidentaldialling of the emergency number.●Keypad autolock period — Select whether thekeypad is locked when your device has been idlefor a certain period of time.●Phone autolock period — To avoidunauthorised use, you can set a time-out afterwhich the device automatically locks. A lockeddevice cannot be used until the correct lock codeis entered. To turn off the autolock period, selectNone.Tip: To lock the device manually, pressthe power key. A list of commandsopens. Select Lock phone.●Lock keys if slide closed — Select whether thekeypad is locked when you close the 2-way slide.Tip: To lock or unlock the keypadmanually when the slide is closed, pressthe left selection key, then the rightselection key.●Lock if SIM card changed — You can set thedevice to ask for the lock code when an unknownSIM card is inserted into your device. The devicemaintains a list of SIM cards that are recognisedas the owner’s cards.●Closed user group — You can specify a group ofpeople to whom you can call and who can callyou (network service).●Confirm SIM services — You can set the deviceto display confirmation messages when you areusing a SIM card service (network service).Certificate managementPress , and select Tools > Settings >General > Security > Certificate management.98SettingsDraft
Digital certificates do not guarantee safety; they areused to verify the origin of software.In the certificate management main view, you cansee a list of authority certificates that are stored inyour device. Scroll right to see a list of personalcertificates, if available.Digital certificates should be used if you want toconnect to an online bank or another site or remoteserver for actions that involve transferringconfidential information. They should also be usedif you want to reduce the risk of viruses or othermalicious software and be sure of the authenticityof software when downloading and installingsoftware.Important: Even if the use of certificatesmakes the risks involved in remote connections andsoftware installation considerably smaller, theymust be used correctly in order to benefit fromincreased security. The existence of a certificatedoes not offer any protection by itself; thecertificate manager must contain correct,authentic, or trusted certificates for increasedsecurity to be available. Certificates have arestricted lifetime. If "Expired certificate" or"Certificate not valid yet" is shown even if thecertificate should be valid, check that the currentdate and time in your device are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs tothe listed owner.For more information, see the extended user guideon the product support pages of the Nokia website.Restore original settingsPress , and select Tools > Settings >General > Factory settings.You can reset some of the settings to their originalvalues. To do this, you need the lock code.After resetting, the device may take a longer timeto power on. Documents and files are unaffected.Positioning settingsPress , and select Tools > Settings >General > Positioning.Positioning methods●Integrated GPS — Use the integrated GPSreceiver of your device.●Assisted GPS — Use Assisted GPS (A-GPS).●Bluetooth GPS — Use a compatible external GPSreceiver with Bluetooth connectivity.●Network based — Use information from thecellular network (network service).Positioning serverTo define an access point, and positioning server forA-GPS, select Positioning server. The positioning 99SettingsDraft
server may be preset by your service provider, andyou may not be able to edit the settings.Phone settingsIn phone settings, you can edit settings related tophone calls and network.For information on call barring, see the extendeduser guide on the product support pages of theNokia website.Call settingsPress , and select Tools > Settings > Phone >Call.●Send my caller ID — You can set your phonenumber to be displayed to (Yes) or hidden from(No) the person to whom you are calling, or thevalue may be set by your service provider whenyou make a subscription (Set by network)(network service).●Call waiting — If you have activated call waiting(network service), the network notifies you of anew incoming call while you have a call inprogress. Set the function on (Activate) or off(Cancel), or check whether the function isactivated (Check status).●Internet call waiting — SelectActivated to benotified of a new incoming internet call whileyou have a call in progress.●Internet call alert — SelectOn to be alerted forincoming internet calls. If you select Off, you arenot alerted, but a notification about missed callsappears.●Default call type — To set internet calls as thedefault call type when making calls, selectInternet call. If an internet call service is notavailable, a regular voice call is started instead.●Reject call with SMS — To send a text messageto a caller informing why you could not answerthe call, select Yes.●Message text — Write a text to be sent in a textmessage when you reject a call.●Image in video call — If video is not sent duringa video call, you can select a still image to bedisplayed instead.●Automatic redial — Select On, and your devicemakes a maximum of 10 attempts to connect thecall after an unsuccessful call attempt. To stopautomatic redialling, press the end key. ●Show call duration — Activate this setting ifyou want the length of a call to be displayedduring the call.●Speed dial — Select On, and the numbersassigned to the number keys (2 to 9) can bedialled by pressing and holding the key.●Anykey answer — Select On, and you cananswer an incoming call by briefly pressing anykeypad key, except the left and right selectionkeys, the power key, and the end key.100SettingsDraft
●Line in use — This setting (network service) isshown only if the SIM card supports twosubscriber numbers, that is, two phone lines.Select which phone line you want to use formaking calls and sending text messages. Calls onboth lines can be answered irrespective of theselected line. If you selectLine 2 and have notsubscribed to this network service, you are notable to make calls. When line 2 is selected, isshown in the standby mode.Tip: To switch between the phonelines, press and hold # in the standbymode.●Line change — To prevent line selection(network service), selectDisable if supported byyour SIM card. To change this setting, you needthe PIN2 code.Call divertPress , and select Tools > Settings > Phone >Call divert.Call divert allows you to divert your incoming callsto your voice mailbox or another phone number. Fordetails, contact your service provider.Select which calls you want to divert and the desireddiverting option. Set the option on (Activate) or off(Cancel), or check whether the option is activated(Check status).Several diverting options can be active at the sametime. When all calls are diverted, is shown inthe standby mode.Call barring and call diverting cannot be active atthe same time.Network settingsPress , and select Tools > Settings > Phone >Network.Your device can automatically switch between theGSM and UMTS networks. The GSM network isindicated with in the standby mode. The UMTSnetwork is indicated with .●Network mode — Select which network to use.If you select Dual mode, the device uses the GSMor UMTS network automatically, according to thenetwork parameters and the roamingagreements between the wireless serviceproviders. Contact your network service providerfor more details. This option is shown only ifsupported by the wireless service provider.●Operator selection — SelectAutomatic to setthe device to search for and select one of theavailable networks, orManual to manually selectthe network from a list. If the connection to themanually selected network is lost, the devicesounds an error tone and asks you to reselect anetwork. The selected network must have a101SettingsDraft
roaming agreement with your home cellularnetwork.A roaming agreement is an agreement betweentwo or more service providers to enable the usersof one service provider to use the services ofother service providers.●Cell info display — SelectOn to set the deviceto indicate when it is used in a cellular networkbased on microcellular network (MCN)technology and to activate cell info reception.Connection settingsIn connection settings, you can edit access pointsand other connectivity settings.You can also edit settings for Bluetooth connectivityin the Bluetooth connectivity application. See"Settings," p. 30.You can also edit settings for data cable connectionsin the USB application. See "USB," p. 32.For more information on connection settings, seethe extended user guide on the product supportpages of the Nokia website.Data connections and accesspointsYour device supports packet data connections(network service), such as GPRS in the GSM network.When you use your device in GSM and UMTSnetworks, multiple data connections can be activeat the same time, and access points can share a dataconnection. In the UMTS network, data connectionsremain active during voice calls.You can also use a WLAN data connection. Only oneconnection in one wireless LAN can be active at atime, but several applications can use the sameinternet access point.To establish a data connection, an access point isrequired. You can define different kinds of accesspoints, such as the following:●MMS access point to send and receive multimediamessages●Internet access point (IAP) to send and receive e-mail and connect to the internetCheck the type of access point you need with yourservice provider for the service you want to access.For availability and subscription to packet dataconnection services, contact your service provider.Access pointsCreate a new access pointPress , and select Tools > Settings >Connection > Access points.You may receive access point settings in a messagefrom a service provider. Some or all access pointsmay be preset for your device by your service102SettingsDraft
provider, and you may not be able to change, create,edit, or remove them. indicates a protected access point. indicates a packet data access point. indicates a WLAN access point.Tip: You can create internet access pointsin a wireless LAN with the WLAN wizard.To create a new access point, select Options >New access point.To edit the settings of an access point, selectOptions > Edit. Follow the instructions from yourservice provider.●Connection name — Enter a descriptive namefor the connection.●Data bearer — Select the data connection type.Depending on the data connection you select, onlycertain setting fields are available. Fill in all fieldsmarked with Must be defined or with a redasterisk. Other fields can be left empty, unless youhave been instructed otherwise by your serviceprovider.To be able to use a data connection, your serviceprovider must support this feature, and if necessary,activate it for your SIM card.Packet data access pointsPress , and select Tools > Settings >Connection > Access points > Options > Editor New access point.Follow the instructions from your service provider.●Access point name — You obtain the accesspoint name from your service provider.●User name — The user name may be needed tomake a data connection, and is usually providedby the service provider.●Prompt password — If you must enter thepassword every time you log in to a server, or ifyou do not want to save your password in thedevice, select Yes.●Password — A password may be needed tomake a data connection and is usually providedby the service provider.●Authentication — Select Secure to always sendyour password encrypted or Normal to sendyour password encrypted when possible.●Homepage — Depending on the access pointyou are setting up, enter the web address or theaddress of the multimedia messaging centre.Select Options > Advanced settings to changethe following settings:●Network type — Select the internet protocoltype to transfer data to and from your device. Theother settings depend on the selected networktype. 103SettingsDraft
●Phone IP address (for IPV4 only) — Enter the IPaddress of your device.●DNS address — Enter the IP addresses of theprimary and secondary DNS servers, if requiredby your service provider. Contact your internetservice provider to obtain these addresses.●Proxy server address — Enter the address ofthe proxy server. ●Proxy port number — Enter the port numberof the proxy server.WLAN internet access pointsPress , and select Tools > Settings >Connection > Access points > Options > Editor New access point.Follow the instructions from the WLAN serviceprovider.●WLAN network name — Select Entermanually or Search for networks. If you selectan existing network, WLAN network mode andWLAN security mode are determined by thesettings of its access point device.●Network status — Define whether the networkname is displayed.●WLAN network mode — Select Ad-hoc tocreate an ad hoc network and to allow devices tosend and receive data directly; a WLAN accesspoint device is not needed. In an ad hoc network,all devices must use the same WLAN networkname.●WLAN security mode — Select the encryptionused: WEP, 802.1x (not for ad hoc networks), orWPA/WPA2. If you select Open network, noencryption is used. The WEP, 802.1x, and WPAfunctions can be used only if the networksupports them.To enter the settings for the selected security mode,select WLAN security settings.For more information, see the extended user guideon the product support pages of the Nokia website.Packet data settingsPress , and select Tools > Settings >Connection > Packet data.The packet data settings affect all access pointsusing a packet data connection.●Packet data connection — If you select Whenavailable and you are in a network that supportspacket data, the device registers to the packetdata network. Starting an active packet dataconnection (for example, to send and receive e-mail) is quicker. If there is no packet datacoverage, the device periodically tries toestablish a packet data connection. If you selectWhen needed, the device uses a packet dataconnection only if you start an application oraction that needs it.104SettingsDraft
●Access point — The access point name is neededto use your device as a packet data modem to acompatible computer.●High speed packet access — Enable or disablethe use of HSDPA (network service) in UMTSnetworks.Wireless LAN settingsPress , and select Tools > Settings >Connection > Wireless LAN.●Show WLAN availability — Select whether is displayed in the standby mode when a wirelessLAN is available.●Scan for networks — If you set Show WLANavailability to Yes, select how often the devicesearches for available wireless LANs and updatesthe indicator.To view advanced settings, select Options >Advanced settings. Changing wireless LANadvanced settings is not recommended.Internet call settingsPress , and select Tools > Settings >Connection > Internet tel..To create a new internet call profile, selectOptions > New profile.To edit an existing profile, select Options > Edit.105SettingsDraft
TroubleshootingQ: What is my password for the lock, PIN, or PUKcodes?A: The default lock code is 12345. If you forget orlose the lock code, contact your device dealer. If youforget or lose a PIN or PUK code, or if you have notreceived such a code, contact your network serviceprovider. For information about passwords, contactyour access point provider, for example, acommercial internet service provider (ISP) ornetwork service provider.Q: How do I close an application that is notresponding?A: Press and hold . To close an application, scrollto it, and press C . Pressing C does not close Musicplayer. To close Music player, select it from the list,and Options > Exit.Q: Why do images look smudgy?A: Ensure that the camera lens protection windowsare clean.Q: Why do missing, discoloured, or bright dotsappear on the screen every time I turn on mydevice?A: This is a characteristic of this type of display.Some displays may contain pixels or dots thatremain on or off. This is normal, not a fault.Q: Why can't my device establish a GPSconnection?A: Find more information about GPS, GPS receiver,satellite signals, and location information in thisuser guide. See "Positioning (GPS)," p. 62.Q: Why can’t I find my friend’s device whileusing Bluetooth connectivity?A: Check that both devices are compatible, haveactivated Bluetooth connectivity, and are not inhidden mode. Check also that the distance betweenthe two devices is not over 10 metres (33 feet) andthat there are no walls or other obstructionsbetween the devices.Q: Why can’t I end a Bluetooth connection?A: If another device is connected to your device, youcan either end the connection using the otherdevice or by deactivating Bluetooth connectivity.Press , and select Tools > Bluetooth >Bluetooth > Off.Q: Why can’t the other device see the files storedon my device in the home network?A: Make sure that you have configured the homenetwork settings, content sharing is turned on inyour device, and the other device is UPnPcompatible.106TroubleshootingDraft
Q: What can I do if my home networkconnection stops working?A: Switch off the wireless LAN (WLAN) connectionfrom your compatible PC and your device, andswitch it on again. If this does not help, restart yourcompatible PC and your device. If the connectionstill does not work, reconfigure the WLAN settingsin both your compatible PC and device. See"Wireless LAN," p. 27. See "Connectionsettings," p. 102.Q: Why can't I see my compatible PC in my devicein the home network?A: If you are using a firewall application in yourcompatible PC, check that it allows home mediaserver to use the external connection (you can addHome media server to the firewall application'sexceptions list). Check from the firewall settingsthat the firewall application allows traffic to thefollowing ports: 1900, 49152, 49153, and 49154.Some WLAN access point devices have a built-infirewall. In such cases, check that the firewall in theaccess point device does not block traffic to thefollowing ports: 1900, 49152, 49153, and 49154.Check that the WLAN settings are the same in yourdevice and compatible PC.Q: Why can't I see a wireless LAN (WLAN) accesspoint even though I know I'm within its range?A: The WLAN access point may use a hidden serviceset identifier (SSID). You can only access networksthat use a hidden SSID if you know the correct SSID,and have created a WLAN Internet access point forthe network on your Nokia device.Q: How do I switch wireless LAN (WLAN) off onmy Nokia device?A: The WLAN on your Nokia device switches offwhen you are not trying to connect, not connectedto another access point, or not scanning foravailable networks. To further reduce batteryconsumption, you can specify that your Nokiadevice does not scan, or scans less often, foravailable networks in the background. WLANswitches off in between background scans.To change the background scan settings:1. Press , and select Tools > Settings >Connection > Wireless LAN.2. To increase the background scan time interval,adjust the time in Scan for networks. To stopbackground scans, select Show WLANavailability > Never.3. To save your changes, press Back.When Scan for networks is set to Never, theWLAN availability icon is not shown in thestandby mode. However, you can still manuallyscan for available WLAN networks, and connectto WLAN networks as usual.107TroubleshootingDraft
Q: How can I save my data before deleting it?A: To save data, use Nokia Nseries PC Suite to makea back-up copy of all data to a compatible computer;send images to your e-mail address, then save theimages to your computer; or send data usingBluetooth connectivity to a compatible device.Q: Why can’t I select a contact for my message?A: The contact card does not have a phone number,an address, or an e-mail address. Press , selectContacts, and edit the contact card.Q: How can I end the data connection when thedevice starts a data connection again andagain?A: The device may be trying to retrieve a multimediamessage from the multimedia message centre. Tostop the device from making a data connection,press , and select Messaging > Options >Settings > Multimedia message > Multimediaretrieval and Manual to have the multimediamessaging centre save messages to be retrievedlater, or Off to ignore all incoming multimediamessages. If you select Manual, you receive anotification when there is a new multimediamessage that you can retrieve in the multimediamessage centre. If you select Off, the device doesnot make any network connections related tomultimedia messaging. To set the device to use apacket data connection only if you start anapplication or action that needs it, press , andselect Tools > Settings > Connection > Packetdata > Packet data connection > Whenneeded. If this does not help, switch the device off,and switch it on again.Q: Why do I have problems connecting thedevice to my PC?A: Ensure that you have the latest version of NokiaNseries PC Suite and that it is installed and runningon your compatible PC. For further information onhow to use Nokia Nseries PC Suite, see the helpfunction on Nokia Nseries PC Suite or visit the Nokiasupport pages.Q: Can I use my device as a fax modem with acompatible PC?A: You cannot use your device as a fax modem.However, with call diverting (network service), youcan divert incoming fax calls to another phonenumber.108TroubleshootingDraft
Battery informationCharging and DischargingYour device is powered by a rechargeable battery.The battery can be charged and dischargedhundreds of times, but it will eventually wear out.When the talk and standby times are noticeablyshorter than normal, replace the battery. Use onlyNokia approved batteries, and recharge yourbattery only with Nokia approved chargersdesignated for this device.If a replacement battery is being used for the firsttime or if the battery has not been used for aprolonged period, it may be necessary to connectthe charger, then disconnect and reconnect it tobegin charging the battery.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave a fully chargedbattery connected to a charger, since overchargingmay shorten its lifetime. If left unused, a fullycharged battery will lose its charge over time.If the battery is completely discharged, it may takeseveral minutes before the charging indicatorappears on the display or before any calls can bemade.Use the battery only for its intended purpose. Neveruse any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such asa coin, clip, or pen causes direct connection of thepositive (+) and negative (-) terminals of thebattery. (These look like metal strips on thebattery.) This might happen, for example, when youcarry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery orthe connecting object.Leaving the battery in hot or cold places, such as ina closed car in summer or winter conditions, willreduce the capacity and lifetime of the battery.Always try to keep the battery between 15°C and25°C (59°F and 77°F). A device with a hot or coldbattery may not work temporarily, even when thebattery is fully charged. Battery performance isparticularly limited in temperatures well belowfreezing.Do not dispose of batteries in a fire as they mayexplode. Batteries may also explode if damaged.Dispose of batteries according to local regulations.Please recycle when possible. Do not dispose ashousehold waste.Do not dismantle or shred cells or batteries. In theevent of a battery leak, do not allow the liquid tocome in contact with the skin or eyes. In the event109Battery informationDraft
of such a leak, flush your skin or eyes immediatelywith water, or seek medical help.Nokia batteryauthentication guidelinesAlways use original Nokia batteries for your safety.To check that you are getting an original Nokiabattery, purchase it from an authorised Nokiadealer, and inspect the hologram label using thefollowing steps:Successful completion of the steps is not a totalassurance of the authenticity of the battery. If youhave any reason to believe that your battery is notan authentic, original Nokia battery, you shouldrefrain from using it, and take it to the nearestauthorised Nokia service point or dealer forassistance. Your authorised Nokia service point ordealer will inspect the battery for authenticity. Ifauthenticity cannot be verified, return the batteryto the place of purchase.Authenticate hologram1. When you look at thehologram on the label, youshould see the Nokiaconnecting hands symbolfrom one angle and theNokia OriginalEnhancements logo whenlooking from another angle.2. When you angle thehologram left, right, downand up, you should see 1, 2,3 and 4 dots on each siderespectively.What if your battery is notauthentic?If you cannot confirm that your Nokia battery withthe hologram on the label is an authentic Nokiabattery, please do not use the battery. Take it to thenearest authorised Nokia service point or dealer forassistance. The use of a battery that is not approvedby the manufacturer may be dangerous and mayresult in poor performance and damage to yourdevice and its enhancements. It may also invalidateany approval or warranty applying to the device.110Battery informationDraft
To find out more about original Nokia batteries,visit www.nokia.com/battery.111Battery informationDraft
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thefollowing suggestions will help you protect yourwarranty coverage.●Keep the device dry. Precipitation, humidity, andall types of liquids or moisture can containminerals that will corrode electronic circuits. Ifyour device does get wet, remove the battery,and allow the device to dry completely beforereplacing it.●Do not use or store the device in dusty, dirtyareas. Its moving parts and electroniccomponents can be damaged.●Do not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or meltcertain plastics.●Do not store the device in cold areas. When thedevice returns to its normal temperature,moisture can form inside the device and damageelectronic circuit boards.●Do not attempt to open the device other than asinstructed in this guide.●Do not drop, knock, or shake the device. Roughhandling can break internal circuit boards andfine mechanics.●Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.●Do not paint the device. Paint can clog themoving parts and prevent proper operation.●Use a soft, clean, dry cloth to clean any lenses,such as camera, proximity sensor, and lightsensor lenses.●Use only the supplied or an approvedreplacement antenna. Unauthorized antennas,modifications, or attachments could damage thedevice and may violate regulations governingradio devices.●Use chargers indoors.●Always create a backup of data you want to keep,such as contacts and calendar notes.●To reset the device from time to time foroptimum performance, power off the device andremove the battery.These suggestions apply equally to your device,battery, charger, or any enhancement. If any deviceis not working properly, take it to the nearestauthorized service facility for service.112Care and maintenanceDraft
DisposalThe crossed-out wheeled-bin symbol on yourproduct, literature, or packaging reminds youthat in the European Union all electrical andelectronic products, batteries, andaccumulators must be taken to separate collectionat the end of their working life. Do not dispose ofthese products as unsorted municipal waste.Return the products to collection to preventpossible harm to the environment or human healthfrom uncontrolled waste disposal and to promotethe sustainable reuse of material resources.Collection information is available from the productretailer, local waste authorities, national producerresponsibility organizations, or your local Nokiarepresentative. For more information, see productEco-Declaration or country-specific information atwww.nokia.com.113Care and maintenanceDraft
Additional safety informationSmall childrenYour device and its enhancements may containsmall parts. Keep them out of the reach of smallchildren.Operating environmentThis device meets RF exposure guidelines whenused either in the normal use position against theear or when positioned at least 1.5 centimeters (5/8 inch) away from the body. When a carry case, beltclip, or holder is used for body-worn operation, itshould not contain metal and should position thedevice the above-stated distance from your body.To transmit data files or messages, this devicerequires a quality connection to the network. Insome cases, transmission of data files or messagesmay be delayed until such a connection is available.Ensure the above separation distance instructionsare followed until the transmission is completed.Parts of the device are magnetic. Metallic materialsmay be attracted to the device. Do not place creditcards or other magnetic storage media near thedevice, because information stored on them may beerased.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer ofthe medical device to determine if they areadequately shielded from external RF energy or ifyou have any questions. Switch off your device inhealth care facilities when any regulations postedin these areas instruct you to do so. Hospitals orhealth care facilities may be using equipment thatcould be sensitive to external RF energy.Implanted medical devicesManufacturers of medical devices recommend thata minimum separation of 15.3 centimeters (6inches) should be maintained between a wirelessdevice and an implanted medical device, such as apacemaker or implanted cardioverter defibrillator,to avoid potential interference with the medicaldevice. Persons who have such devices should:●Always keep the wireless device more than 15.3centimeters (6 inches) from the medical devicewhen the wireless device is turned on.●Not carry the wireless device in a breast pocket.114Additional safety informationDraft
●Hold the wireless device to the ear opposite themedical device to minimize the potential forinterference.●Turn the wireless device off immediately if thereis any reason to suspect that interference istaking place.●Read and follow the directions from themanufacturer of their implanted medical device.If you have any questions about using your wirelessdevice with an implanted medical device, consultyour health care provider.Hearing aidsSome digital wireless devices may interfere withsome hearing aids. If interference occurs, consultyour service provider.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bagsystems. For more information, check with themanufacturer, or its representative, of your vehicleor any equipment that has been added.Only qualified personnel should service the deviceor install the device in a vehicle. Faulty installationor service may be dangerous and may invalidate anywarranty that may apply to the device. Checkregularly that all wireless device equipment in yourvehicle is mounted and operating properly. Do notstore or carry flammable liquids, gases, or explosivematerials in the same compartment as the device,its parts, or enhancements. For vehicles equippedwith an air bag, remember that air bags inflate withgreat force. Do not place objects, including installedor portable wireless equipment in the area over theair bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installedand the air bag inflates, serious injury could result.Using your device while flying in aircraft isprohibited. Switch off your device before boardingan aircraft. The use of wireless teledevices in anaircraft may be dangerous to the operation of theaircraft, disrupt the wireless telephone network,and may be illegal.Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey allsigns and instructions. Potentially explosiveatmospheres include areas where you wouldnormally be advised to turn off your vehicle engine.Sparks in such areas could cause an explosion or fireresulting in bodily injury or even death. Switch off 115Additional safety informationDraft
the device at refuelling points such as near gaspumps at service stations. Observe restrictions onthe use of radio equipment in fuel depots, storage,and distribution areas; chemical plants; or whereblasting operations are in progress. Areas with apotentially explosive atmosphere are often, but notalways, clearly marked. They include below deck onboats, chemical transfer or storage facilities andareas where the air contains chemicals or particlessuch as grain, dust, or metal powders. You shouldcheck with the manufacturers of vehicles usingliquefied petroleum gas (such as propane orbutane) to determine if this device can be safelyused in their vicinity.Emergency callsImportant: Wireless phones, including thisdevice, operate using radio signals, wirelessnetworks, landline networks, and user-programmed functions. Because of this,connections in all conditions cannot be guaranteed.You should never rely solely on any wireless devicefor essential communications like medicalemergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength.Some networks may require that a valid SIM cardis properly inserted in the device.2. Press the end key as many times as needed toclear the display and ready the device for calls.3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.If certain features are in use, you may first need toturn those features off before you can make anemergency call. If the device is in the offline or flightprofile mode, you may need to change the profileto activate the phone function before you can makean emergency call. Consult this guide or your serviceprovider for more information.When making an emergency call, give all thenecessary information as accurately as possible.Your wireless device may be the only means ofcommunication at the scene of an accident. Do notend the call until given permission to do so.CERTIFICATION INFORMATION(SAR)This mobile device meets guidelines forexposure to radio waves.Your mobile device is a radio transmitter andreceiver. It is designed not to exceed the limits for116Additional safety informationDraft
exposure to radio waves recommended byinternational guidelines. These guidelines weredeveloped by the independent scientificorganization ICNIRP and include safety marginsdesigned to assure the protection of all persons,regardless of age and health.The exposure guidelines for mobile devices employa unit of measurement known as the SpecificAbsorption Rate or SAR. The SAR limit stated in theICNIRP guidelines is 2.0 watts/kilogram (W/kg)averaged over 10 grams of tissue. Tests for SAR areconducted using standard operating positions withthe device transmitting at its highest certifiedpower level in all tested frequency bands. The actualSAR level of an operating device can be below themaximum value because the device is designed touse only the power required to reach the network.That amount changes depending on a number offactors such as how close you are to a network basestation. The highest SAR value under the ICNIRPguidelines for use of the device at the ear is x.xx W/kg.Use of device accessories and enhancements mayresult in different SAR values. SAR values may varydepending on national reporting and testingrequirements and the network band. Additional SARinformation may be provided under productinformation at www.nokia.com.Your mobile device is also designed to meet therequirements for exposure to radio wavesestablished by the Federal CommunicationsCommission (USA) and Industry Canada. Theserequirements set a SAR limit of 1.6 W/kg averagedover one gram of tissue. The highest SAR valuereported under this standard during productcertification for use at the ear is 0.41 W/kg and whenproperly worn on the body is 0.69 W/kg. Informationabout this device model can be found at http://www.fcc.gov/oet/fccid by searching the equipmentauthorization system using FCC ID:PDNRM-320.117Additional safety informationDraft
IndexAaccess codes 13access points 28, 102accessoriesSee enhancementsactivation keys 46active standby mode 72, 96active toolbarin camera 49in gallery 58address bookSee contactsalarm clock 73alarm, calendar note 74albums, media 59anniversary notes 74answering calls 84application manager 92applications 92attachments 78, 79audio messages 75auto-update for time/date 73Bbacklight time-out 96batterypower saver setting 96saving power 14birthday notes 74Bluetooth connectivitydevice address 31device visibility 30pairing devices 31receiving data 32security 31sending data 31settings 30switching on/off 30bookmarks 24brightness, display 96browserbookmarks 24browsing pages 22, 24cache memory 25security 25settings 25Ccable connection 32cache memory 25calculator 92calendar 73calls 84answering 84duration of 89internet calls 87rejecting 84settings 100cameracolour 54flash 51image quality 54imaging mode 50lighting 54settings 53video mode 52video quality 55certificates 98clock 72, 73computer connections 33See also data connectionsconnection manager 29contact information 12contactscopying 91editing 90images in 90ringing tones 90saving 90copyright protection 46customer service 12118IndexDraft
Ddata connectionscable 32PC connectivity 33date and time 73declining calls 84dialled numbers 88dismissing calls 84display settings 96DRM (digital rightsmanagement) 46duration of calls 89Ee-mail messages 78enhancements settings 97Ffactory settings,restoring 99FM radio 42font settings 96Ggallery 57general information 12GPS (Global PositioningSystem) 62grid view of menus 72Hhelp application 12HSDPA (high-speed downlinkpacket access) 21IIAPs (internet accesspoints) 28imagessharing online 60inbox, message 77indicators and icons 17installation ofapplications 92internet calls 86, 88connecting 87making 87profiles 86, 105settings 105internet connection 22See also browserJJ2ME Java applicationsupport 92Java scripts/applications 92Kkeyguard 19keypad 19Llanguage settings 97light settings 96list view of menus 72location information 62lock code 13locking keypad 19loudspeaker 18Mmailboxe-mail 78video 84voice 84main menu 72mediamusic player 37radio 42RealPlayer 45streaming 45meeting notes 74meetings, setting up 74memo notes 74memoryweb cache 25messagese-mail 78folders for 75icon for incoming 77multimedia 77settings 79 119IndexDraft
voice 84Mini Map 24MMS (multimedia messageservice) 75, 77multimedia menu 20multimedia messages 75, 77music player 37muting sound 84my numbers 90Nnavigation tools 62network settings 101Nokia contactinformation 12Nokia Maps 64Ooffline mode 19operator logo 97outbox, message 75Ppacket data connectionaccess point settings 103settings 104page overview 24personal certificates 98personalisation 71, 96phonebookSee contactsphotographsSee cameraPIN code 13PIN2 code 13positioning information 62positioning settings 99power saver 96presentations,multimedia 78product support pages 12profilesinternet call profile 86, 105offline restrictions 19proxy settings 104PUK codes 13Rradio 42RealPlayer 45recording video clips 52redial feature 100rejecting calls 84remote mailbox 78ringing tones 71Sscreen settings 96securitycertificates 98web browser 25security code 13sent messages folder 75setting wizard 16settingsaccess points 102Bluetooth connectivity 30call divert 101calls 100camera 53certificates 98display 96enhancements 97internet call 105language 97network 101packet data 104packet data accesspoints 103personalisation 96positioning 99shortcuts 97standby 96tv-out 97Video Centre 36web browser 25WLAN 105WLAN internet accesspoints 104shortcuts 97SIM card security 98slide show 59120IndexDraft
SMS (short messageservice) 75software applications 92software update 13songs 37speaker phone 18standby mode 72, 96streaming media 45support 12Symbian applications 92Ttemplates, message 76text messagesreceiving and reading 77replying to 77sending 75settings 80themes 71time and date 73time zone settings 73time-out for backlight 96tonesring settings 71settings 96toolbar 49, 58transferring data 16transferring music 40troubleshooting 106TV configuration 97tv-out mode 59Uunlocking keypad 19UPIN code 13UPUK code 13USB cable connection 32Vvideo calls 85, 86Visual Radio 42voice callsSee callsvoice over IP 88voice over IP (VOIP) 86VoIP 88volume controls 18Wwallpaper 71web connection 22week settings, calendar 74welcome 16welcome note 96wireless LAN (WLAN) 27wireless LAN settings 105world clock 73Zzooming 51, 53121IndexDraft

Navigation menu