Microsoft RM-321 GSM Cellular Phone w/BT User Manual

Microsoft Mobile Oy GSM Cellular Phone w/BT

Manual

Download:
Mirror Download [FCC.gov]
Document ID	920437
Application ID	8rQ6+aVD51yakvv+2Qt16A==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	113.1kB (1413798 bits)
Date Submitted	2008-03-27 00:00:00
Creation Date	2008-01-24 14:54:05
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-01-24 14:58:31
Document Title	untitled
Document Author:	mode

Nokia N95 8GB User Guide
6666666
Issue 2
Cyan Magenta Yellow Black
Cyan Magenta Yellow Black
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-321 product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at
www.nokia.com/phones/declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia Original Enhancements logos, Nseries, N95, N-Gage, Visual Radio, and Nokia Care are trademarks or registered
trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be
trademarks or tradenames of their respective owners.
Nokia, Nokia Connecting People, Nseries, N95, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation.
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
This product includes software licensed from Symbian Software Ltd © 1998-2007. Symbian and Symbian OS are trademarks of Symbian
Ltd.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
Portions of the Nokia Maps software are copyright © 1996-2002 The FreeType Project. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
Cyan Magenta Yellow Black
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related
to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty
for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO
THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
/Issue 2
Cyan Magenta Yellow Black
For your safety ............................................6
Web browser..............................................20
About your device...........................................................7
Network services.............................................................8
Enhancements, batteries, and chargers.......................8
Get connected............................................10
Browse the web............................................................21
Web feeds and blogs....................................................22
Widgets..........................................................................22
End the connection.......................................................22
Connection security......................................................23
Useful information.....................................10
Connections................................................23
Help.................................................................................11
Get started.....................................................................11
Nokia support and contact information.....................11
Extended user guide.....................................................11
Additional applications................................................12
Software updates..........................................................12
Settings..........................................................................12
Access codes..................................................................12
Prolong battery life.......................................................13
Wireless LAN..................................................................24
Connection manager....................................................26
Bluetooth connectivity.................................................26
USB..................................................................................29
PC connections..............................................................30
Your device.................................................14
Your device in North America......................................14
Welcome........................................................................15
Transfer content............................................................15
Display indicators..........................................................16
Volume and loudspeaker control................................17
Lock the keypad............................................................18
Offline profile.................................................................18
Games.............................................................................18
Multimedia menu..........................................................19
Fast downloading.........................................................20
Nokia Video Centre.....................................30
Find and view videos....................................................30
Internet videos..............................................................31
Play downloaded videos..............................................32
Transfer videos from your PC.......................................32
Settings..........................................................................32
Music folder................................................33
Music player...................................................................33
Nokia Music Store..........................................................37
Radio..............................................................................38
Nokia Podcasting..........................................................39
Media folder...............................................40
RealPlayer .....................................................................41
Activation keys..............................................................41
Cyan Magenta Yellow Black
Contents
Contents
Contents
Camera.......................................................42
About the camera.........................................................43
Image capture...............................................................43
Video recording.............................................................47
Camera settings.............................................................49
Gallery........................................................52
View and organise files................................................52
Images and video clips.................................................52
TV-out mode..................................................................55
Share images and videos online..................................56
About home network...................................................56
Positioning (GPS)........................................56
About GPS.......................................................................57
GPS receiver...................................................................58
About satellite signals..................................................58
Maps...............................................................................59
GPS data.........................................................................64
Personalise your device.............................65
Mailbox...........................................................................73
Messaging settings.......................................................75
Make calls...................................................79
Voice calls.......................................................................79
Voice and video mailboxes..........................................80
Answer or decline a call................................................80
Make a video call...........................................................80
Answer or decline a video call.....................................81
Internet calls..................................................................81
Log..................................................................................84
Contacts (phonebook)................................85
Save and edit names and numbers.............................85
Add ringing tones for contacts....................................85
Copy contacts.................................................................86
Applications folder.....................................86
Calculator.......................................................................86
Application manager....................................................86
Themes...........................................................................66
Profiles—set tones........................................................66
Modify the standby mode............................................67
Modify the main menu.................................................67
Tools folder................................................88
Time management.....................................67
Clock ..............................................................................68
Calendar.........................................................................68
General settings............................................................90
Phone settings...............................................................94
Connection settings......................................................96
Messaging..................................................69
Troubleshooting........................................99
Messaging main view...................................................70
Write and send messages............................................70
Messaging inbox...........................................................72
Nokia original enhancements.................102
File manager..................................................................89
Mass memory tool.........................................................89
Settings......................................................89
Enhancements.............................................................103
Cyan Magenta Yellow Black
Battery information.................................104
Charging and discharging..........................................104
Nokia battery authentication guidelines.................105
Care and maintenance.............................106
Disposal........................................................................107
Additional safety information.................107
Small children..............................................................107
Operating environment..............................................107
Medical devices...........................................................108
Vehicles........................................................................108
Potentially explosive environments.........................109
Emergency calls...........................................................110
Certification information (SAR)..................................110
Index........................................................112
Cyan Magenta Yellow Black
Contents
Battery..........................................................................103
For your safety
For your safety
Read these simple guidelines. Not following them
may be dangerous or illegal. Read the complete user
guide for further information.
Do not use the device at a refueling point. Do
not use near fuel or chemicals.
SWITCH ON SAFELY
SWITCH OFF NEAR BLASTING
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
Follow any restrictions. Do not use the
device where blasting is in progress.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands
free to operate the vehicle while driving.
Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off
near medical equipment.
SWITCH OFF IN AIRCRAFT
SWITCH OFF WHEN REFUELING
Follow any restrictions. Wireless devices can
cause interference in aircraft.
USE SENSIBLY
Use only in the positions as explained in the
product documentation. Do not touch the
antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or
repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
Cyan Magenta Yellow Black
Remember to make back-up copies or keep
a written record of all important information
stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read
its user guide for detailed safety
instructions. Do not connect incompatible
products.
EMERGENCY CALLS
Ensure the phone function of the device is
switched on and in service. Press the end key
as many times as needed to clear the display
and return to the standby mode. Enter the
emergency number, then press the call key.
Give your location. Do not end the call until
given permission to do so.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800, and 1900 and
UMTS 2100 networks. Contact your service provider for
more information about networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Copyright protections may prevent some images,
music (including ringing tones), and other content
from being copied, modified, transferred, or
forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device
may be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise
caution and open messages, accept connectivity
requests, download content, and accept installations
only from trustworthy sources. To increase the security
of your devices, consider installing, using, and
regularly updating antivirus software, firewall, and
other related software on your device and any
connected computer.
For your safety
BACK-UP COPIES
Warning: To use any features in this device,
other than the alarm clock, the device must be
switched on. Do not switch the device on when
wireless device use may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
During extended operation, such as an active video
sharing session or high-speed data connection, the
device may feel warm. In most cases, this condition is
normal. If you suspect the device is not working
Cyan Magenta Yellow Black
For your safety
properly, take it to the nearest authorized service
facility.
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as MMS, browsing, and e-mail require
network support for these technologies.
The images in this guide may differ from your device
display.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Your service
provider can give you instructions and explain what
charges will apply. Some networks may have
limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
Enhancements, batteries,
and chargers
Always switch the device off and disconnect the
charger before removing the battery.
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the DC-4, AC-4, or AC-5
charger and from an AC-1, ACP-8, ACP-9, ACP-12, or
LCH-12 charger when used with the CA-44 charger
adapter.
The battery intended for use with this device is BL-6F.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer. When you disconnect the
Cyan Magenta Yellow Black
For your safety
power cord of any enhancement, grasp and pull the
plug, not the cord.
Cyan Magenta Yellow Black
Get connected
Get connected
Nokia N95 8GB supports the following connectivity
methods:
Ⴠ 2G and 3G networks
Ⴠ Bluetooth connectivity — to transfer files and
connect to compatible enhancements. See
"Bluetooth connectivity", p. 26.
Ⴠ Nokia AV connector (3.5 mm) — to connect to
compatible headsets, headphones, TVs , or home
stereo sets. See "TV-out mode", p. 55.
Ⴠ Data cable — to connect to compatible devices,
such as printers and PCs. See "USB", p. 29.
Ⴠ Wireless LAN (WLAN) — to connect to the internet
and WLAN enabled devices. See "Wireless
LAN", p. 24.
Ⴠ Infrared — to transfer and synchronise data
between compatible devices.
Ⴠ GPS — to connect to GPS satellites to measure
your location. See "Positioning (GPS)", p. 56.
10
Cyan Magenta Yellow Black
Model number: Nokia N95-2
Hereinafter referred to as Nokia N95 8GB.
For local services and warranty information, please
refer to the separate booklet.
Help
Your device has context-sensitive help. When an
application is open, select OptionsHelp to
access help for the current view.
When you are reading the instructions, to switch
between help and the application that is open in the
background, press and hold .
Nokia support and contact
information
Check or your local Nokia website for the latest
guides, additional information, downloads, and
services related to your Nokia product. You may also
download free configuration settings such as MMS,
GPRS, e-mail, and other services for your device
model at .
If you need to contact customer service, check the
list of local Nokia Care contact centres at .
For maintenance services, check your nearest Nokia
Care point at .
To open help from the main menu, select Tools
UtilitiesHelp. Select the desired application to
view its help topics.
Extended user guide
Get started
An extended version of this user guide is available
on the product support pages of the Nokia website.
Some applications or functionalities, for example,
the applications in the Office folder, are explained
only in the extended user guide.
See the get started guide for keys and parts
information, instructions for setting up the device
and for other essential information.
Useful information
Useful information
11
Cyan Magenta Yellow Black
Useful information
Additional applications
Settings
There are various applications provided by Nokia
and different third-party software developers that
help you do more with your device. These
applications are explained in the guides that are
available on the product support pages of the Nokia
website.
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured
in the device, based upon your network service
provider information. You may have settings from
your service providers already installed in your
device, or you may receive or request the settings
from the network service providers as a special
message.
Software updates
Nokia may produce software updates that may offer
new features, enhanced functions, or improved
performance. You may be able to request these
updates through the Nokia Software Updater PC
application. To update the device software, you
need the Nokia Software Updater application and a
compatible PC with Microsoft Windows 2000, XP, or
Vista operating system, broadband internet access,
and a compatible data cable to connect your device
to the PC.
To get more information and to download the Nokia
Software Updater application, visit
www.nokiausa.com/softwareupdate in the United
States or www.latinoamerica.nokia.com/nsu in
Latin America.
12
Tip: To check the software version in your
device, enter *#0000# in the standby mode.
You can change the general settings in your device,
such as language, standby mode, display, and
keypad lock settings. See "General
settings", p. 90.
Access codes
If you forget any of the access codes, contact your
service provider.
Ⴠ Personal identification number (PIN) code — This
code protects your SIM card against
unauthorised use. The PIN code (4 to 8 digits) is
usually supplied with the SIM card. After three
consecutive incorrect PIN code entries, the code
is blocked, and you need the PUK code to unblock
it.
Ⴠ UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version
Cyan Magenta Yellow Black
Ⴠ
Ⴠ
Ⴠ
Prolong battery life
Many features in your device increase the demand
on battery power and reduce the battery life time.
To save battery power, note the following:
Ⴠ Features that use Bluetooth technology, or
allowing such features to run in the background
while using other features, increase the demand
on battery power. To prolong the operating time
of your device, turn the Bluetooth technology off
when you do not need it.
Useful information
Ⴠ
of the SIM card and is supported by UMTS mobile
phones.
PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access
some functions in your device.
Lock code (also known as security code) — This
code (5 digits) can be used to lock the device to
avoid unauthorised use. The factory setting for
the lock code is 12345. To avoid unauthorised
use of your device, change the lock code. Keep
the new code secret and in a safe place separate
from your device. Try entering the code only
once, if you forget the code. If the code you
entered is not correct, contact a Nokia Care point
or your service provider for further instructions.
Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with
the SIM card, contact the operator whose SIM
card is in your device.
UPUK code — This code (8 digits) is required to
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the operator
whose USIM card is in your device.
Ⴠ Features that use wireless LAN (WLAN), or
allowing such features to run in the background
while using other features, increase the demand
on battery power. WLAN on your Nokia device
switches off when you are not trying to connect,
not connected to another access point, or not
scanning for available networks. To further
reduce battery consumption, you can specify that
your device does not scan, or scans less often, for
available networks in the background. WLAN
switches off in between background scans. See
"Wireless LAN", p. 24. When Scan for
networks is set to Never, the WLAN availability
icon is not shown in the standby mode. However,
you can still manually scan for available WLAN
networks and connect to WLAN networks as
usual.
13
Cyan Magenta Yellow Black
Your device
Ⴠ If you have set Packet data connection to
When available in connection settings, and
there is no packet data coverage (GPRS), the
device periodically tries to establish a packet
data connection, which causes increased
demand on battery power. To prolong the
operating time of your device, select Packet
data connectionWhen needed.
Ⴠ The Maps application downloads new map
information when you scroll to new areas on the
map, which increases the demand on battery
power. You can prevent the device from
automatically downloading new maps. See
"Maps", p. 59.
Ⴠ If the signal strength of the cellular network
varies much in your area, your device must scan
for the available network repeatedly. This
increases the demand on battery power.
If the network mode is set to dual mode in the
network settings, the device searches for the
UMTS network. If it is not available, the device
uses the available GSM network. To only use the
GSM network, press , and select Tools
SettingsPhoneNetworkNetwork
modeGSM.
Ⴠ The backlight of the display increases the
demand on battery power. To change the timeout after which the backlight is switched off,
press , and select ToolsSettings
GeneralPersonalisationDisplay
Light time-out. To adjust the light sensor that
observes the lighting conditions and adjusts the
brightness of the display, in the display settings,
select Light sensor.
Ⴠ Leaving applications running in the background
increases the demand on battery power. To close
the applications you do not use, press and hold
, scroll to an application in the list, and press
C.
Pressing C does not close Music player. To close
Music player, select it from the list and Options
Exit.
Your device
Your device in North America
14
This Nokia device is designed to be compatible with
wireless service networks in many countries. Not all
networks support all features offered in this device.
For instance, video calls, video sharing, push-totalk, and instant messaging are not compatible
with the networks in the United States of America.
Cyan Magenta Yellow Black
To access the Welcome application later, press ,
and select ToolsUtilitiesWelcome. You can
also access the individual applications from their
menu locations.
If network operator settings are not automatically
configured in your device, visit the product support
pages at www.nokia.com for help in obtaining the
correct settings.
With the Switch application, you can transfer
content, such as contacts, between two compatible
Nokia devices using Bluetooth connectivity or
infrared.
Welcome
When you switch on your device, the Welcome
application is displayed.
Select from the following:
Ⴠ Sett. wizard — to configure various settings,
such as e-mail. For more information on the
Settings wizard application, see the guides
available at the Nokia product support pages or
your local Nokia website.
Ⴠ Switch — to transfer content, such as contacts
and calendar entries, from a compatible Nokia
device. See "Transfer content", p. 15.
There may also be a demonstration about your
device available in the Welcome application.
Transfer content
Your device
Your device supports 2100 MHz UMTS (HSDPA)
network. However, that frequency is not used in
North America and has been turned off in your
device. To activate the 2100 MHz UMTS frequency for
use outside North America, press , and select
ToolsSettingsPhoneNetwork
Network modeDual mode.
The type of content that can be transferred depends
on the model of the device from which you want to
transfer content. If the other device supports
synchronisation, you can also synchronise data
between the other device and your device. Your
device notifies you if the other device is not
compatible.
If the other device cannot be powered on without
a SIM card, you can insert your SIM card in it. When
your device is switched on without a SIM card, the
offline profile is automatically activated.
Transfer content
1. To retrieve data from the other device for the
first time, on your device, select Switch in the
Welcome application, or press , and select
ToolsUtilitiesSwitch.
15
Cyan Magenta Yellow Black
Your device
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
3. If you select Bluetooth connectivity: To have
your device search for devices with Bluetooth
connectivity, select Continue. Select the device
from which you want to transfer content. You
are asked to enter a code on your device. Enter
a code (1-16 digits), and select OK. Enter the
same code on the other device, and select OK.
The devices are now paired. See "Pair
devices", p. 28.
For some device models, the Switch application
is sent to the other device as a message. To
install the Switch application on the other
device, open the message, and follow the
instructions on the display.
If you select infrared, connect the two devices.
4. From your device, select the content you want to
transfer from the other device.
Once the transfer has started, you can cancel it
and continue later.
Transferring time depends on the amount of data
to be transferred.
Content is transferred from the memory of the other
device to the corresponding location in your device.
16
Display indicators
The device is being used in a GSM network
(network service).
The device is being used in a UMTS network
(network service).
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder.
You have missed calls.
The ringing type is set to silent, and the message
alert tone and e-mail alert tone are set to off.
The ringing type is set to silent.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network
service).
All calls to the device are diverted to another
number (network service). If you have two phone
lines, a number indicates the active line.
A compatible headset is connected to the device.
Cyan Magenta Yellow Black
A wireless LAN connection is active in a
network that has encryption.
A compatible text phone is connected to the
device.
A wireless LAN connection is active in a network
that does not have encryption.
A data call is active (network service).
A GPRS packet data connection is active (network
service). indicates the connection is on hold and
that a connection is available.
A packet data connection is active in a part of the
network that supports EGPRS (network service).
indicates the connection is on hold and that a
connection is available. The icons indicate that
EGPRS is available in the network, but your device is
not necessarily using EGPRS in the data transfer.
Bluetooth connectivity is on. See "Bluetooth
connectivity", p. 26.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
A USB connection is active.
An infrared connection is active. If the
indicator is blinking, the device is trying to connect
to the other device or the connection has been lost.
A UMTS packet data connection is active (network
service). indicates the connection is on hold and
that a connection is available.
Volume and loudspeaker
control
High-speed downlink packet access (HSDPA) is
supported and active (network service). indicates
the connection is on hold and that a connection
is available. See "Fast downloading", p. 20.
To increase or decrease the volume level when you
have an active call or are listening to a sound, use
the volume key.
You have set the device to scan for wireless LANs,
and a wireless LAN is available (network service).
See "About WLAN", p. 24.
Your device
A compatible TV out cable is connected to the
device.
The built-in loudspeaker
allows you to speak and
listen from a short
distance without having to hold the device to your
ear.
17
Cyan Magenta Yellow Black
Your device
Warning: Do not hold the device near your
ear when the loudspeaker is in use, because the
volume may be extremely loud.
To use the loudspeaker during a call, select
OptionsActivate loudspeaker.
To turn off the loudspeaker, select Options
Activate handset.
Lock the keypad
To lock the keys, press the left selection key, then
the right selection key.
To unlock the keys, open the 2-way slide, or press
the left selection key, then the right selection key.
You can select to lock the keypad automatically after
a time-out or when the 2-way slide is closed. See
"Security settings", p. 92.
Offline profile
Press
18
, and select ToolsProfilesOffline.
The offline profile lets you use the device without
connecting to the wireless network. When you
activate the offline profile, the connection to the
in
wireless network is turned off, as indicated by
the signal strength indicator area. All wireless RF
signals to and from the device are prevented. If you
try to send messages, they are placed in the outbox
to be sent later.
When the offline profile is active, you can use your
device without a SIM card.
Important: In the offline profile you cannot
make or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the lock
code.
When you have activated the offline profile, you can
still use the wireless LAN, for example, to read your
e-mail or browse on the internet. Remember to
comply with any applicable safety requirements
when establishing and using a wireless LAN
connection. You can also use Bluetooth connectivity
while in the offline profile.
To leave the offline profile, press the power key
briefly, and select another profile. The device reenables wireless transmissions (providing there is
sufficient signal strength).
Games
You can play high-quality multiplayer N-Gage™
games with your device.
Cyan Magenta Yellow Black
Multimedia menu
Ⴠ Discover N-Gage application — With this preview
application you can get information about the
upcoming N-Gage gaming experience, try out
game demos, and download and install the full
N-Gage application when it becomes available.
Ⴠ N-Gage application — The full featured
application gives you access to the complete NGage experience replacing the Discover N-Gage
application in the menu. You can find new
games, try and buy games, find other players,
and access scores, events, chat, and more. Some
features may not be available at the time of
software installation on your device, check
www.n-gage.com for software updates.
With the multimedia
menu, you can view your
most frequently used
multimedia content. The
selected content is shown
in the appropriate
application.
For the full N-Gage experience, you need internet
access on your device, either through the cellular
network or wireless LAN. Contact your service
provider for more information on data services.
For more information, visit www.n-gage.com.
Your device
Your device includes either one of the following
applications in the main menu:
To open or close the
multimedia menu, press
the multimedia key. To
browse the tiles, scroll left
or right. To select items,
press the scroll key. To return to the multimedia
menu from an open application, press the
multimedia key.
Select from the following:
Ⴠ Music — Enter Music player and the Now playing
view, browse your songs and play lists, or
download and manage podcasts.
Ⴠ Gallery — View your last taken picture, start a
slide show of your images, or view media files in
albums.
Ⴠ Games — Try out Nokia Nseries games.
Ⴠ Maps — View your favourite locations in Maps.
Ⴠ Internet — View your favourite web links in the
browser.
Cyan Magenta Yellow Black
19
Web browser
Ⴠ Contacts — Add your own contacts, send
messages, or make voice calls. To add a new
contact to an empty position on the list, press the
scroll key, and select a contact. To send a
message, in the multimedia menu, select a
contact, and Send text message or Send
multimedia msg..
Ⴠ Videos — View your favourite videos, and video
clips saved in Nokia Video Centre.
To change the order of the tiles, select Options
Arrange tiles.
Fast downloading
High-speed downlink packet access (HSDPA, also
) is a network service
called 3.5G, indicated by
in UMTS networks and provides high-speed data
downloads. When HSDPA support in the device is
activated and the device is connected to a UMTS
network that supports HSDPA, downloading data
such as messages, e-mail, and browser pages
through the cellular network may be faster. An
active HSDPA connection is indicated by . See
"Display indicators", p. 16.
You can activate or deactivate support for HSDPA in
the device settings. See "Packet data
settings", p. 98.
For availability and subscription to data connection
services, contact your service provider.
HSDPA only affects the download speed; sending
data to the network, such as messages and e-mail,
is not affected.
Web browser
The XHTML browser in this device supports the
Unicode encoding format.
To browse the web, you need to have an internet
access point configured in your device.
If the web page is unreadable or not supported and
garbage code is found while browsing, you can try
to press , and select WebOptions
SettingsPageDefault encoding, and select
a corresponding encoding.
For more information on the web browser, see the
extended user guide on the product support pages
of the Nokia website.
20
Cyan Magenta Yellow Black
To save the web address of the current page as a
bookmark, select OptionsSave as bookmark.
Press
To use visual history to view snapshots of the pages
you have visited during the current browsing
session, select Back (available if History list is set
on in the browser settings and the current page is
not the first page you visit). To go to a previously
visited page, select the page.
, and select Web.
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
To browse a web page, in the bookmarks view,
select a bookmark, or enter the address in the field
( ), and press the scroll key.
Some web pages may contain material, such as
graphics and sounds, that requires a large amount
of memory to view. If your device runs out of
memory while loading such a page, the graphics on
the page are not shown.
To browse web pages without graphics, to save
memory, select OptionsSettingsPage
Load contentText only.
Web browser
Browse the web
To save a page while browsing, select Options
ToolsSave page.
You can save pages and browse them later when
offline. You can also group these saved pages into
folders. To access the pages you have saved, select
OptionsBookmarksSaved pages.
To open a sublist of commands or actions for the
page that is open, select OptionsService
options (if supported by the web page).
To allow or prevent the automatic opening of
multiple windows, select OptionsWindow
Block pop-ups or Allow pop-ups.
Shortcuts while browsing
Ⴠ Press 1 to open your bookmarks.
To enter a new web page address you want to visit,
select OptionsGo to web address.
Ⴠ Press 2 to search for keywords in the current
page.
To retrieve the latest content of the page from the
server, select OptionsNavigation options
Reload.
Ⴠ Press 3 to return to the previous page.
Ⴠ Press 5 to list all open windows.
Cyan Magenta Yellow Black
21
Web browser
Ⴠ Press 8 to show the page overview of the current
page. Press 8 again to zoom in and view the
desired section of the page.
To view the web feeds to which you have
subscribed, in the bookmarks view, select Web
feeds.
Ⴠ Press 9 to enter a new web address.
To update a web feed, select it and Options
Refresh.
Ⴠ Press 0 to go to the home page (if defined in
settings).
Ⴠ Press * and # to zoom in or out on the page.
Tip: To return to the standby mode with the
browser open in the background, press
twice or the end key. To return to the browser,
press and hold , and select the browser
from the list.
Web feeds and blogs
Web feeds are xml files on web pages that are used
by the weblog community and news organisations
to share the latest headlines or text, for example,
news feeds. Blogs or weblogs are web diaries. Most
of the web feeds use RSS and Atom technologies. It
is common to find web feeds on web, blog, and wiki
pages.
The Web application automatically detects if a web
page contains web feeds.
To subscribe to a web feed, select Options
Subscribe.
22
To define how the web feeds are updated, select
OptionsSettingsWeb feeds.
Widgets
The web browser supports widgets (network
service). Widgets are small, downloadable web
applications that deliver multimedia, news feeds,
and other information, such as weather reports, to
your device. Installed widgets appear as separate
applications in the Applications folder.
You can download widgets using the Download!
application or from the web.
The default access point for widgets is the same as
in the web browser. When active in the background,
some widgets may update information
automatically to your device.
End the connection
To end the connection and view the browser page
offline, select OptionsToolsDisconnect; or
Cyan Magenta Yellow Black
device and the internet gateway or server is
encrypted.
To take the browser to the background, press the
end key once. To end the connection, press and hold
the end key.
The security icon does not indicate that the data
transmission between the gateway and the content
server (or place where the requested resource is
stored) is secure. The service provider secures the
data transmission between the gateway and the
content server.
To delete the information the network server
collects about your visits to various web pages,
select OptionsClear privacy dataDelete
cookies.
Connection security
If the security indicator ( ) is displayed during a
connection, the data transmission between the
Connections
to end the connection and close the browser, select
OptionsExit.
Security certificates may be required for some
services, such as banking services. You are notified
if the identity of the server is not authentic or if you
do not have the correct security certificate in your
device. For more information, contact your service
provider.
Connections
At Nokia, we understand how important it is that
your mobile phone or device operates reliably and
that your personal content is saved safely.
Ⴠ Always keep Bluetooth connectivity closed
unless you want your phone or device to be
visible to others.
Any information from an unknown or unreliable
source, via Bluetooth connectivity, multimedia
message, infrared, or cable, may harm your PC,
mobile phone, or device. You may protect your
mobile phone or device from damage and keep it
secured by following simple measures:
Ⴠ Always be alert when receiving information from
an unknown or untrustworthy source.
Ⴠ Do not download or install any applications that
may include software harmful to your phone or
device.
Cyan Magenta Yellow Black
23
Connections
Ⴠ Always download and install applications or
content from trusted or well-known sources,
such as Nokia Software Market, where good
protection is provided against viruses and other
harmful software.
Your device offers several options to connect to the
internet or to another compatible device or PC.
For more information on connectivity, see the
extended user guide on the product support pages
of the Nokia website.
Wireless LAN
Your device supports wireless local area network
(WLAN). With WLAN, you can connect your device to
the internet and compatible devices that have
WLAN.
About WLAN
To use WLAN, it must be available in the location,
and your device must be connected to the WLAN.
24
Your device supports the following WLAN features:
Ⴠ IEEE 802.11b/g standard
Ⴠ Operation at 2.4 GHz
Ⴠ Wired equivalent privacy (WEP) with keys up to
128 bits, Wi-Fi protected access (WPA), and
802.1x encryption methods. These functions can
be used only if they are supported by the
network.
WLAN connections
To use WLAN, you must create an internet access
point (IAP) for WLAN. Use the access point for
applications that need to connect to the internet.
See "WLAN internet access points", p. 25.
Important: Always enable one of the
available encryption methods to increase the
security of your wireless LAN connection. Using
encryption reduces the risk of unauthorized access
to your data.
Some places, like France, have restrictions on the
use of wireless LAN. Check with your local
authorities for more information.
A WLAN connection is established when you create
a data connection using a WLAN internet access
point. The active WLAN connection ends when you
end the data connection.
Features that use WLAN, or that are allowed to run
in the background while using other features,
increase the demand on battery power and reduce
the battery life.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one
WLAN access point device at a time, but several
applications can use the same internet access point.
Cyan Magenta Yellow Black
Tip: To check the unique media access control
(MAC) address that identifies your device,
enter *#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN
and manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the
status, and select it.
If the search finds WLANs, for example, WLAN
network found is displayed, to create an internet
access point (IAP) and start the web browser using
this IAP, select the status and Start Web
browsing.
If you select a secured WLAN network, you are asked
to enter the relevant passcodes. To connect to a
hidden network, you must enter the correct
network name (service set identifier, SSID). To
create a new access point for a hidden WLAN, select
New WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and Continue Web browsing. To
end the connection in the WLAN, select the status
and Disconnect WLAN.
If WLAN scanning is off and you are not connected
to any WLAN, WLAN scanning off is displayed. To
set scanning on and search for available WLANs,
select the status and press the scroll key.
Connections
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with
any applicable safety requirements when
establishing and using a WLAN connection.
To start a search for available WLANs, select the
status and Search for WLAN. To set WLAN scanning
off, select the status and select WLAN scanning
off.
To access the WLAN wizard application in the menu,
press , and select ToolsWLAN wiz..
WLAN internet access points
Press
, and select ToolsWLAN wiz.
Select Options and from the following:
Ⴠ Filter WLAN networks — Filter out WLANs in
the list of found networks. The selected networks
are filtered out the next time the application
searches for WLANs.
Ⴠ Details — View the details of a network shown
in the list. If you select an active connection, the
connection details are displayed.
Ⴠ Define access point — Create an internet access
point (IAP) in a WLAN.
Ⴠ Edit access point — Edit the details of an
existing IAP.
Cyan Magenta Yellow Black
25
Connections
You can also use connection manager to create
internet access points. See "Active data
connections", p. 26.
Connection manager
Active data connections
Press , and select ToolsConnectivity
Conn. mgr.Active data connections.
In the active data connections view, you can see the
open data connections:
Available WLAN networks
Press , and select ToolsConnectivity
Conn. mgr.Available WLAN networks.
The available WLAN view shows a list of WLANs
within range, their network mode (infrastructure or
ad hoc), and signal strength indicator. is shown
if your device
for networks with encryption, and
has an active connection in the network.
To view the details of a network, select Options
Details.
To create an internet access point in a network,
select OptionsDefine access point.
data calls
packet data connections
Bluetooth connectivity
WLAN connections
Note: The actual time invoiced for calls by
your service provider may vary, depending on
network features, rounding off for billing, and so
forth.
To end a connection, select Options
Disconnect. To close all open connections, select
OptionsDisconnect all.
To view the details of a connection, select
OptionsDetails. The details shown depend on
the connection type.
26
About Bluetooth connectivity
You can make a wireless connection to other
compatible devices with Bluetooth connectivity.
Compatible devices may include mobile phones,
computers, and enhancements such as headsets
and car kits. You can use Bluetooth connectivity to
send images, video clips, music and sound clips, and
notes; make a wireless connection to your
compatible PC (for example, to transfer files); and
connect to a compatible printer to print images
with Image print.
Cyan Magenta Yellow Black
This device is compliant with Bluetooth
Specification 2.0 supporting the following profiles:
Advanced Audio Distribution Profile, Audio/Video
Remote Control Profile, Basic Imaging Profile, Basic
Printing Profile, Dial-up Networking Profile, File
Transfer Profile, Hands-Free Profile, Headset Profile,
Human Interface Device Profile, Object Push Profile,
SIM Access Profile, and Synchronization Profile. To
ensure interoperability between other devices
supporting Bluetooth technology, use Nokia
approved enhancements for this model. Check with
the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing
such features to run in the background while using
other features, increase the demand on battery
power and reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See "Phone and SIM", p. 92.
Settings
Press
, and select ToolsBluetooth.
When you open the application for the first time,
you are asked to define a name for your device. You
can change the name later on.
Select from the following:
Connections
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need
to be in direct line-of-sight. However, they must be
within 10 metres (33 feet) of each other, although
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
Ⴠ Bluetooth — To make a wireless connection to
another compatible device, first set Bluetooth
connectivity On, then establish a connection. To
switch off Bluetooth connectivity, select Off.
Ⴠ My phone's visibility — To allow your device to
be found by other devices with Bluetooth
wireless technology, select Shown to all. To set
a time after which the visibility is set from shown
to hidden, select Define period. To hide your
device from other devices, select Hidden.
Ⴠ My phone's name — Edit the name shown to
other devices with Bluetooth wireless
technology.
Ⴠ Remote SIM mode — To enable another device,
such as a compatible car kit enhancement, to use
the SIM card in your device to connect to the
network, select On.
Security tips
Press
, and select ToolsBluetooth.
Cyan Magenta Yellow Black
27
Connections
When you are not using Bluetooth connectivity, to
control who can find your device and connect to it,
select BluetoothOff or My phone's visibility
Hidden.
Do not pair with or accept connection requests from
an unknown device. This protects your device from
harmful content.
Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a
time. For example, if you are connected to a
compatible headset, you can also transfer files to
another compatible device at the same time.
1. Open the application where the item you want
to send is stored. For example, to send an image
to another compatible device, open Gallery.
2. Select the item and OptionsSendVia
Bluetooth.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are
as follows:
computer
phone
audio or video device
28
other device
To interrupt the search, select Stop.
3. Select the device with which you want to
connect.
4. If the other device requires pairing before data
can be transmitted, a tone sounds, and you are
asked to enter a passcode. See "Pair
devices", p. 28.
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some
devices may show only the unique address
(device address). To find the unique address
of your device, enter *#2820# in the standby
mode.
Pair devices
To pair with compatible devices and view your
paired devices, in the main view of Bluetooth
connectivity, scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other
device to use the same code. Devices that do not
have a user interface have a factory-set passcode.
The passcode is used only once.
1. To pair with a device, select OptionsNew
paired device. Devices that are within range are
displayed.
Cyan Magenta Yellow Black
Receive data using Bluetooth
connectivity
3. Some audio enhancements connect
automatically to your device after pairing.
Otherwise, scroll to the enhancement, and select
OptionsConnect to audio device.
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if
you want to accept the message. If you accept,
is displayed, and the item is placed in the
Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
Paired devices are indicated by
search.
in the device
To set a device as authorised or unauthorised, scroll
to the device, and select from the following options:
Ⴠ Set as authorised — Connections between your
device and the authorised device can be made
without your knowledge. No separate
acceptance or authorisation is needed. Use this
status for your own devices, such as your
compatible headset or PC or devices that belong
to someone you trust. indicates authorised
devices in the paired devices view.
Ⴠ Set as unauthorised — Connection requests
from this device must be accepted separately
every time.
To cancel a pairing, scroll to the device, and select
OptionsDelete.
If you want to cancel all pairings, select Options
Delete all.
Connections
2. Select the device, and enter the passcode. The
same passcode must be entered on the other
device as well.
USB
Press
USB.
, and select ToolsConnectivity
To have the device ask the purpose of the
connection each time a compatible data cable is
connected, select Ask on connectionYes.
If Ask on connection is set to off or you want to
change the mode during an active connection,
select USB mode and from the following:
Ⴠ PC Suite — Use Nokia PC applications such as
Nokia Nseries PC Suite.
Use Nokia PC applications such as Nokia Nseries
PC suite, Nokia Lifeblog, and Nokia Software
Updater.
Ⴠ Data transfer — Transfer data between your
device and a compatible PC. Use this mode also
Cyan Magenta Yellow Black
29
Nokia Video Centre
for downloading maps with the Nokia Map
Loader PC application.
Ⴠ Image print — Print images on a compatible
printer.
Ⴠ Media player — Synchronise music with
Windows Media Player.
applications. With Nokia Nseries PC Suite you can,
for example, transfer images between your device
and a compatible PC.
Always create the connection from the PC to
synchronise with your device.
PC connections
You can use your device with a variety of compatible
PC connectivity and data communications
Nokia Video Centre
With Nokia Video Centre (network service), you can
download and stream video clips over the air from
compatible internet video services using packet
data or WLAN. You can also transfer video clips from
a compatible PC to your device and view them in
Video Centre.
Find and view videos
1. Press
, and select Video centre.
2. To connect to a service, scroll left or right, and
select the desired video service.
Video Centre supports the same file formats as
RealPlayer. All videos are played in the landscape
mode by default.
Your device may have predefined services.
30
Service providers may provide free content or
charge a fee. Check the pricing in the service or from
the service provider.
Cyan Magenta Yellow Black
To connect to the internet to browse available
services that you can add to the main view, select
Add new services.
Internet videos
The device updates and displays the content
available in the service.
3. To view videos by categories (if available), scroll
left or right to view the other tabs.
4. To view information about a video, select
OptionsVideo details.
5. Some video clips can be streamed over the air,
but others must be first downloaded to your
device. To download a video clip, select
OptionsDownload.
To stream a video clip or view a downloaded clip,
select OptionsPlay.
6. When the clip is playing, use the media keys to
control the player. To adjust the volume, press
the volume key.
Internet videos are video clips distributed in the
internet using RSS-based feeds. You can add new
feeds to Internet videos in the settings.
Nokia Video Centre
Downloads continue in the background if you exit
the application. The downloaded videos are saved
in Video centreMy videos.
You can view your feeds in the Internet videos
folder in Video Centre.
To add or delete feeds, select OptionsFeed
subscriptions.
To view the videos available in a feed, scroll to it,
and press the scroll key.
To view information about a video, select
OptionsVideo details.
To download a video, scroll to it, and select
OptionsDownload.
To play the downloaded video, press the scroll key.
31
Cyan Magenta Yellow Black
Nokia Video Centre
The downloaded videos are saved in Video
centreMy videos.
1. To view your device on a PC as a mass memory
device (E:\) where you can transfer any data
files, make the connection with a compatible
USB data cable.
To play a downloaded video, press the scroll key.
2. Select Mass storage as the connection mode.
To play a downloaded video in the home network,
select OptionsShow via home network. Home
network must be configured first. See "About home
network", p. 56.
3. Select the videos you want to copy from your PC.
Play downloaded videos
When the clip is playing, use the media keys to
control the player. To adjust the volume, press the
volume key.
If there is not enough free space in the device
memory, the application automatically deletes
some of the oldest videos when new videos are
downloaded. indicates videos that may soon be
deleted.
To prevent a video from being automatically
deleted ( ), select OptionsProtect.
Transfer videos from your PC
Transfer your own videos to Video Centre from
compatible devices using a compatible USB data
cable.
32
To transfer videos from a compatible PC, do the
following:
4. Transfer the videos to E:\My Videos in the mass
memory of your device.
The transferred videos appear in the My
videos folder in Video Centre. Video files in other
folders of your device are not displayed.
Settings
In the Video Centre main view, select Options
Settings and from the following:
Ⴠ Video service selection — Select the video
services you want to appear in the main view of
the application. You can also view the details of
a video service.
Some services require a user name and a
password that you receive from the service
provider.
Ⴠ Default access points — Select the access
points used for the data connection. Using packet
data access points to download files may involve
the transmission of large amounts of data
through your service provider's network. Contact
Cyan Magenta Yellow Black
memory becomes full, the device saves the
content in the other memory, if available. If there
is not enough space in the other memory, the
application automatically deletes some of the
oldest videos.
Ⴠ Thumbnails — Select whether to view
thumbnail images in video lists.
Music folder
your service provider for information about data
transmission charges.
Ⴠ Parental control — Activate the parental lock
for video services.
Ⴠ Preferred memory — Select whether
downloaded videos are saved in the device
memory or mass memory. If the selected
Music folder
Music player
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
Music player supports files formats such as AAC, AAC
+, eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is the method for delivering
audio or video content over the internet using
either RSS or Atom technologies for playback on
mobile devices and PCs.
You can transfer music from other compatible
devices to your device. See "Transfer music to your
device", p. 35.
Play a song or a podcast episode
You may have to refresh the music and podcast
libraries after you have updated the song or podcast
selection in your device. To add all available items
to the library, in the Music player main view, select
OptionsRefresh.
To play a song or a podcast episode, do the
following:
1. Press
, and select MusicMusic player.
2. Select Music or Podcasts.
33
Cyan Magenta Yellow Black
Music folder
3. Select categories to
navigate to the song or
podcast episode you want
to hear.
To adjust the volume, press the volume key.
To modify the tone of the music playback, select
OptionsEqualiser.
To modify the balance and stereo image or to
enhance bass, select OptionsAudio settings.
4. To play the selected files,
press
To view a visualisation during playback, select
OptionsShow visualisation.
To pause playback, press
again.
to resume, press
To stop playback, press .
To fast forward or rewind, press and hold
or
To go to the next
item, press
To return to the
beginning of the
item, press
To skip to the
previous item,
again
press
within 2 seconds
after a song or podcast has started.
To switch random play (
OptionsShuffle.
34
) on or off, select
To return to the standby mode and leave the player
playing in the background, press the end key, or to
switch to another open application, press and hold
To close the player, select OptionsExit.
Music menu
Press , and select MusicMusic player
Music.
The music menu shows the available music. Select
the desired option in the music menu to view all
songs, sorted songs, or playlists.
When the Music player is playing in the background,
to open the Now playing view in the multimedia
menu, press the multimedia key.
To repeat the current item ( ), all items ( ), or
to switch repeat off, select OptionsRepeat.
Playlists
If you play podcasts, shuffle and repeat are
automatically switched off.
Press , and select MusicMusic player
Music.
Cyan Magenta Yellow Black
To view details of the playlist, select Options
Playlist details.
Create a playlist
1. Select OptionsCreate playlist.
To remove a song from a playlist, select Options
Remove. This does not delete the song from the
device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you
want to move, and select OptionsReorder list.
To grab songs and drop them to a new position, use
the scroll key.
Music folder
To view and manage playlists, in the music menu,
select Playlists.
2. Enter a name for the playlist, and select OK.
3. To add songs now, select Yes; or to add the
songs later, select No.
4. If you select Yes, select artists to find the songs
you want to include in the playlist. Press the
scroll key to add items.
To show the song list under an artist title, scroll
right. To hide the song list, scroll left.
5. When you have made your selections, select
Done.
The playlist is saved to the mass memory of your
device.
To add more songs later, when viewing the playlist,
select OptionsAdd songs.
To add songs, albums, artists, genres, and
composers to a playlist from the different views of
the music menu, select an item and OptionsAdd
to a playlistSaved playlist or New playlist.
Podcasts
Press , and select MusicMusic player
Podcasts.
The podcast menu displays the podcasts available
in the device.
Podcast episodes have three states: never played,
partially played, and completely played. If an
episode is partially played, it plays from the last
playback position the next time it is played. If an
episode is never played or completely played, it
plays from the beginning.
Transfer music to your device
You can transfer music from a compatible PC or
other compatible devices using a compatible USB
data cable or Bluetooth connectivity.
PC requirements for music transfer:
Ⴠ Microsoft Windows XP operating system (or
later)
Cyan Magenta Yellow Black
35
Music folder
Ⴠ A compatible version of the Windows Media
Player application. You can get more detailed
information about Windows Media Player
compatibility from your device's product pages
on the Nokia website.
Ⴠ Nokia Nseries PC Suite 1.6 or later
Windows Media Player 10 may cause playback
delays to WMDRM technology protected files after
they have been transferred to your device. Check
Microsoft support website for a hotfix to Windows
Media Player 10 or get a newer compatible version
of Windows Media Player.
Transfer music from PC
You can use three different methods to transfer
music:
Ⴠ To view your device on a PC as a mass memory
device where you can transfer any data files,
make the connection with a compatible USB data
cable or Bluetooth connectivity. If you are using
the USB cable, select Mass storage as the
connection mode.
Ⴠ To synchronise music with Windows Media
Player, connect the compatible USB data cable
and select Media player as the connection
mode.
36
Ⴠ To use Nokia Music Manager in Nokia Nseries PC
Suite, connect the compatible USB data cable and
select PC Suite as the connection mode.
Use Mass storage and Media player modes to
transfer files to the mass memory of your device.
To change the default USB connection mode, press
, and select ToolsConnectivityUSBUSB
mode.
Both Windows Media Player and Nokia Music
Manager in Nokia Nseries PC Suite have been
optimised to transfer music files. For information
about transferring music with Nokia Music
Manager, see the help function on Nokia Nseries PC
Suite or visit the Nokia support pages.
Transfer with Windows Media Player
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the
corresponding Windows Media Player guides and
help.
Manual synchronisation
With manual synchronisation, you can select the
songs and playlists that you want to move, copy, or
remove.
1. After your device is connected with Windows
Media Player, select your device in the
navigation pane on the right, if more than one
device is connected.
2. In the left navigation pane, browse the music
files on your PC which you want to synchronise.
Cyan Magenta Yellow Black
You can see the amount of available memory in
your device above the Sync List.
library is selected for synchronisation. If there is not
enough free memory in your device, Windows
Media Player selects manual synchronisation
automatically.
4. To remove songs or albums, select an item in the
Sync List, right-click, and select Remove from
list.
To stop automatic synchronisation, click the Sync
tab, and select Stop Sync to 'Nokia Handset'.
5. To start the synchronisation, click Start Sync.
Nokia Music Store
Automatic synchronisation
1. To activate the automatic synchronisation
function in Windows Media Player, click the
Sync tab, select Nokia Handset > Set Up
Sync..., and check the Sync this device
automatically check box.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane,
and click Add.
The selected items are transferred to the
Playlists to sync pane.
3. To finalise the setup for automatic
synchronisation, click Finish.
When the Sync this device automatically check
box is checked and you connect your device to the
PC, the music library in your device is automatically
updated based on the playlists you select for
synchronisation in Windows Media Player. If no
playlists have been selected, the whole PC music
Music folder
3. Drag and drop songs to the Sync List on the
right.
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you first need to
register for the service.
To check the Nokia Music Store availability in your
country, visit www.nokia.com/music.
To access the Nokia Music Store, you must have a
valid internet access point in the device.
To open Nokia Music Store, press
MusicMusic store.
, and select
To find more music in different categories of the
music menu, select OptionsFind in Music
store.
For more information, see the extended user guide
on the product support pages of the Nokia website.
Cyan Magenta Yellow Black
37
Music folder
Press
Radio
You can use the radio as a traditional FM radio with
automatic tuning and saved stations or with
parallel visual information related to the radio
programme on the display if you tune to stations
that offer Visual Radio service. The Visual Radio
service uses packet data (network service).
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
When you open the radio for the first time, a wizard
helps you to save local radio stations (network
service).
If you do not have access to the Visual Radio service,
the operators and radio stations in your area may
not support Visual Radio.
For more information on the radio, see the
extended user guide on the product support pages
of the Nokia website.
Listen to the radio
38
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for
the FM radio to function properly.
, and select MusicRadio.
Note that the quality of the radio broadcast
depends on the coverage of the radio station in that
particular area.
You can normally make a call or answer an incoming
call while listening to the radio. The radio is muted
when there is an active call.
or
. To
To start a station search, select
change the frequency manually, select Options
Manual tuning.
If you have previously saved radio stations, to go to
the next or previous saved station, select
or
To adjust the volume, press the volume key.
To listen to the radio using the loudspeaker, select
OptionsActivate loudspeaker.
To view available stations based on location, select
OptionsStation directory (network service).
To save the current tuned station to your station list,
select OptionsSave station. To open the list of
your saved stations, select OptionsStations.
To return to the standby mode and allow the FM
radio to play in the background, select Options
Play in background.
Cyan Magenta Yellow Black
Settings
To check availability and costs and to subscribe to
the service, contact your service provider.
Before using Nokia Podcasting, set your connection
and download settings.
To view available visual content for a tuned station,
or OptionsStart visual service. If the
select
visual service ID has not been saved for the station,
enter it, or select Retrieve to search for it in the
station directory (network service).
The recommended connection method is WLAN.
Check with your service provider for terms and data
service fees before using other connections. For
example, a flat rate data plan can allow large data
transfers for one monthly fee.
When the connection to the visual service is
established, the current visual content is displayed.
Connection settings
Nokia Podcasting
With the Nokia Podcasting application (network
service), you can search, discover, subscribe to, and
download podcasts over the air, and play, manage,
and share audio and video podcasts with your
device.
Warning: Listen to music at a moderate
level. Continuous exposure to high volume may
damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because
the volume may be extremely loud.
For more information, see the extended user guide
on the product support pages of the Nokia website.
Music folder
View visual content
To edit the connection settings, press , and select
MusicPodcastingOptionsSettings
Connection. Define the following:
Ⴠ Default access point — Select the access point
to define your connection to the internet.
Ⴠ Search service URL — Define the podcast search
service to be used in searches.
Download settings
To edit the download settings, press , and select
MusicPodcastingOptionsSettings
Download. Define the following:
Ⴠ Save to — Define the location where you want
to save your podcasts. For optimal use of storage
space, mass memory is recommended.
Ⴠ Update interval — Define how often podcasts
are updated.
Ⴠ Next update date — Define the date of the next
automatic update.
Cyan Magenta Yellow Black
39
Media folder
Ⴠ Next update time — Define the time of next
automatic update.
manage, download, and play episodes in
Podcasts.
Automatic updates only occur if a specific default
access point is selected and Nokia Podcasting is
running. If Nokia Podcasting is not running, the
automatic updates are not activated.
Ⴠ Download limit (%) — Define the size of the
memory that is used for podcast downloads.
Ⴠ If limit exceeds — Define what to do if the
downloads exceed the download limit.
To see the podcasts you have subscribed to, select
PodcastingPodcasts.
Setting the application to retrieve podcasts
automatically may involve the transmission of large
amounts of data through your service provider’s
network. Contact your service provider for
information about data transmission charges.
To restore the default settings, select Options
Restore default in the settings view.
Downloads
To see individual episode titles (an episode is a
particular media file of a podcast), select the
podcast title.
To start a download, select the episode title. To
download or to continue to download selected or
marked episodes, select OptionsDownload or
Continue download. You can download multiple
episodes at the same time.
To play a portion of a podcast during download or
after partial downloading, select the podcast and
OptionsPlay preview.
Fully downloaded podcasts can be found in the
Podcasts folder, but are not shown until the library
is refreshed.
After you have subscribed to a podcast, from
directories, search, or by entering a URL, you can
Media folder
40
For information on Flash Player, Nokia Lifeblog, and
Recorder, see the extended user guide on the
product support pages of the Nokia website.
Cyan Magenta Yellow Black
Stream content over the air
With RealPlayer, you can play video clips or stream
media files over the air without saving them to the
device first.
Many service providers require you to use an
internet access point (IAP) for your default access
point. Other service providers allow you to use a
WAP access point.
RealPlayer supports files with extensions such as .
3gp, .mp4, or .rm. However, RealPlayer does not
necessarily support all file formats or all the
variations of file formats.
When playback is active, in the landscape view, use
the media keys to control the player.
For more information on RealPlayer, see the
extended user guide on the product support pages
of the Nokia website.
Play video clips
Press , and select ApplicationsMedia
RealPlayer.
1. To play a saved media file, select Options
Open and from the following:
Ⴠ Most recent clips — Play one of the last six
files played in RealPlayer.
Ⴠ Saved clip — Play a file saved in Gallery.
2. Scroll to a file, and press the scroll key to play the
file.
To adjust the volume, use the volume key.
In RealPlayer, you can only open an rtsp:// URL
address. However, RealPlayer plays a .ram file if you
open an http link to it in a browser.
Media folder
RealPlayer
To stream content over the air (network service),
select a streaming link saved in Gallery, on a web
page, or received in a text message or multimedia
message. Before live content begins streaming,
your device connects to the site and starts loading
the content. The content is not saved in your device.
Activation keys
To view the digital rights activation keys stored in
your device, press , and select Applications
MediaActv. keys.
Digital rights management
Content owners may use different types of digital
rights management (DRM) technologies to protect
their intellectual property, including copyrights.
This device uses various types of DRM software to
access DRM-protected content. With this device you
can access content protected with WMDRM 10, OMA
DRM 1.0, and OMA DRM 2.0. If certain DRM software
Cyan Magenta Yellow Black
41
Camera
fails to protect the content, content owners may ask
that such DRM software's ability to access new DRMprotected content be revoked. Revocation may also
prevent renewal of such DRM-protected content
already in your device. Revocation of such DRM
software does not affect the use of content
protected with other types of DRM or the use of nonDRM-protected content.
Digital rights management (DRM) protected content
comes with an associated activation key that
defines your rights to use the content.
If your device has OMA DRM protected content, to
back up both the activation keys and the content,
use the backup feature of Nokia PC Suite. Other
transfer methods may not transfer the activation
keys which need to be restored with the content for
you to be able to continue the use of OMA DRM
protected content after the device memory is
formatted. You may also need to restore the
activation keys in case the files on your device get
corrupted.
If your device has WMDRM protected content, both
the activation keys and the content will be lost if the
device memory is formatted. You may also lose the
activation keys and the content in case the files on
your device get corrupted. Losing the activation
keys or the content may limit your ability to use the
same content on your device again. For more
information, contact your service provider.
Some activation keys may be connected to a specific
SIM card, and the protected content can be accessed
only if the SIM card is inserted in the device.
In the activation keys main view, select from the
following:
Ⴠ Valid keys — View keys that are connected to
one or more media files and keys whose validity
period has not started yet.
Ⴠ Invalid keys — View keys that are not valid; the
time period for using the media file is exceeded
or there is a protected media file in the device
but no connected activation key.
Ⴠ Not in use — View keys that have no media files
connected to them in the device.
To buy more usage time or extend the usage period
for a media file, select an invalid activation key and
OptionsGet new key. Activation keys cannot be
updated if web service message reception is
disabled.
To view detailed information, such as the validity
status and ability to send the file, scroll to an
activation key, and press the scroll key.
42
Cyan Magenta Yellow Black
Camera
Camera
To activate the main camera, press and hold the
capture key, or press , and select Applications
Camera.
To close the main camera, press Exit.
For image capture tips and information on scenes,
sequence mode, and self-timer, see the extended
user guide on the product support pages of the
Nokia website.
About the camera
Your Nokia N95 8GB has two cameras, a highresolution camera on the back of the device (the
main camera, up to 5 megapixels, in landscape
mode) and a lower resolution camera on the front
(the secondary camera in portrait mode). You can
use both cameras to take still pictures and record
videos.
Your device supports an image capture resolution
of 2592x1944 pixels. The image resolution in this
guide may appear different.
the MPEG-4 file format with the .mp4 file extension,
or in the 3GPP file format with the .3gp file
extension (sharing quality). See "Video
settings", p. 51.
You can send images and video clips in a multimedia
message, as an e-mail attachment, or by using other
connection methods, such as Bluetooth
connectivity or wireless LAN connection. You can
also upload them to a compatible online album. See
"Share images and videos online", p. 56.
To optimise the size of the image or video clip for
sending, select the proper image or video quality
from the camera settings. Check the size limits of
MMS and e-mail messages with your service
provider.
Image capture
To activate the main camera, press and hold the
capture key, or press , and select Applications
Camera.
The images and video clips are automatically saved
in Images & videos in Gallery. The cameras
produce .jpeg images. Video clips are recorded in
Cyan Magenta Yellow Black
43
Camera
Still image camera indicators
The still image camera viewfinder displays the
following:
6 — The device memory ( ) and mass memory
( ) indicators, which show where images are saved
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after taking
a picture or recording a video. Scroll to items, and
select them by pressing the scroll key. You can also
define when the active toolbar is visible on the
display.
The settings in the active toolbar return to the
default settings after you close the camera.
1 — Capture mode indicator
2 — Active toolbar. The toolbar is not displayed
during image capture. See "Active
toolbar", p. 44.
3 — Battery charge level indicator
4 — Image resolution indicator, which indicates
whether the quality of the image is Print 5M Large, Print 3M - Medium, Print 2M - Medium, Email 0.8M - Med., or MMS 0.3M - Small. The quality
of a digitally zoomed picture is lower than that of
an unzoomed picture.
44
5 — Image counter, which displays the estimated
number of images you can capture using the current
image quality setting and memory in use. The
counter is not displayed during image capture.
To view the active toolbar before and after taking a
picture or recording a video, select Options
Show icons. To view the active toolbar only when
you need it, select OptionsHide icons. Only the
capture mode and battery level indicators are
shown on the display. To activate the active toolbar,
press the scroll key. The toolbar is visible for 5
seconds.
Before taking a picture or recording a video, in the
active toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only).
Cyan Magenta Yellow Black
to select a colour effect
to show or hide the viewfinder grid (images
only)
to adjust white balance
to adjust the exposure compensation (images
only)
to adjust sharpness (images only)
to adjust contrast (images only)
to adjust light sensitivity (images only)
The icons change to reflect the current status of the
setting.
The available options vary depending on the
capture mode and view you are in. See "After taking
a picture", p. 46. See "After recording a
video", p. 48. The active toolbar in Gallery has
different options. See "Active toolbar", p. 53.
take longer if you change the zoom, lighting, or
colour settings.
Ⴠ To free memory for new pictures, transfer files to
a compatible PC using a compatible USB data
cable, for example, and delete the files from your
device. The device informs you when the
memory is full, and asks whether you want to
change the memory in use.
Camera
to activate the sequence mode (images only).
When taking a picture, note the following:
Ⴠ Use both hands to keep the camera still.
Ⴠ The quality of a digitally zoomed picture is lower
than that of a nonzoomed picture.
Ⴠ The camera goes into the battery saving mode if
there are no keypresses for a moment. To
continue taking pictures, press the capture key.
To take a picture, do the following:
1. If the camera is in the video mode, select the
image mode from the active toolbar.
Take pictures
Before taking a picture, note the following:
Ⴠ To make lighting and colour adjustments, use the
scroll key to scroll through the active toolbar. See
"Setup settings—adjust colour and
lighting", p. 50. Saving the captured image may
45
Cyan Magenta Yellow Black
Camera
2. To lock the focus on an
object, press the capture
key halfway down (main
camera only, not
available in landscape
and sports scenes). The
green locked focus
indicator appears on the
display. If the focus was
not locked, the red focus
indicator appears. Release the capture key, and
press it halfway down again. You can, however,
take the picture without locking the focus.
3. To take a picture, press the capture key. Do not
move the device before the image is saved.
To zoom in or out when taking a picture, use the
zoom key in your device.
Tip: To open Gallery and view the pictures you
on the side of your
have taken, press
device twice.
To activate the front camera, select OptionsUse
secondary camera. To take a picture, press the
scroll key. To zoom in or out, scroll up or down.
To leave the camera open in the background and
use other applications, press . To return to the
camera, press and hold the capture key.
46
After taking a picture
Select the following from the active toolbar
(available only if you select Show captured
imageOn in the still image camera settings):
Ⴠ If you do not want to keep the image, select
Delete ( ).
Ⴠ To send the image using a multimedia message,
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or
select Send ( ). See "Write and send
messages", p. 70. This option is not available
during an active call.
You can also send the image to a call recipient
during an active call. Select Send to caller ( )
(only available during an active call).
Ⴠ To tag images to the print basket for later
printing, select Add to Print basket ( ).
Ⴠ To send the image to a compatible online album,
(available only if you have set up an
select
account for a compatible online album). See
"Share images and videos online", p. 56.
to
To zoom in an image after taking it, press
open the image in Gallery, and select the zooming
option from the options list.
To use the image as wallpaper in the active standby,
select OptionsSet as wallpaper.
Cyan Magenta Yellow Black
Camera
To set the image as a call image for a contact, select
OptionsSet as contact call img.Assign to
contact.
To return to the viewfinder to capture a new image,
press the capture key.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range.
Do not cover the flash while taking a picture.
The camera of your device has an LED flash for low
light conditions. The following flash modes are
available for the still image camera: Automatic
( ), R. eye redu. ( ), On ( ), and Off ( ).
To change the flash mode, in the active toolbar,
select the desired flash mode.
1 — Capture mode indicator
2 — Audio mute on indicator
3 — Active toolbar. The toolbar is not displayed
during recording. See "Active toolbar", p. 44.
4 — The battery charge level indicator
5 — Video quality indicator that indicates whether
the quality of the video is TV high quality, TV
normal quality, E-mail high quality, E-mail
norm. quality, or Sharing quality
6 — The video clip file type
Video recording
To activate the main camera, press and hold the
capture key, or press , and select Applications
Camera.
Video capture indicators
The video viewfinder displays the following:
7 — Total available video recording time. When you
are recording, the current video length indicator
also shows the elapsed time and time remaining.
8 — The device memory ( ) and mass memory
( ) indicators that show where videos are saved
9 — The video stabilisation is turned on (
"Video settings", p. 51.
Cyan Magenta Yellow Black
). See
47
Camera
To display all viewfinder indicators, select
OptionsShow icons. Select Hide icons to
display only the video status indicators, and during
the recording, the available record time, zoom bar
when zooming, and the selection keys.
Record videos
Before recording a video, note the following:
Ⴠ To make lighting and colour adjustments, scroll
through the active toolbar. See "Setup settings—
adjust colour and lighting", p. 50.
Ⴠ To free memory for new video clips, transfer files
to a compatible PC using a compatible USB data
cable, for example, and remove the files from
your device. The device informs you when the
memory is full, and asks whether you want to
change the memory in use.
To record a video, do the following:
1. If the camera is in the image mode, select the
video mode from the active toolbar.
2. To start recording, press the capture key. The red
record icon ( ) is shown and a tone sounds,
indicating that recording has started.
48
3. To pause recording at any time, press Pause.
Video recording automatically stops if recording
is set to pause and there are no keypresses
within a minute. Select Continue to resume
recording.
To zoom in or out of the subject, use the zoom
key in your device.
4. To stop recording, select Stop. The video clip is
automatically saved to the Images & videos
folder of Gallery. The maximum length of the
video clip depends on the available memory.
To activate the front camera, select OptionsUse
secondary camera. To start recording a video,
press the scroll key. To zoom in or out, scroll up or
down.
After recording a video
After you record a video clip, select the following
from the active toolbar (available only if Show
captured video is set to On in the video settings):
Ⴠ To immediately play the video clip you just
recorded, select Play ( ).
Ⴠ If you do not want to keep the video, select
Delete ( ).
Ⴠ To send the video clip using a multimedia
message, e-mail, or other connection methods,
such as Bluetooth connectivity, press the call key,
or select Send ( ). See "Write and send
messages", p. 70. See "Send data using
Bluetooth connectivity", p. 28. This option is not
available during an active call. You may not be
Cyan Magenta Yellow Black
You can also send the video clip to a call recipient
during an active call. Select Send to caller ( )
(only available during an active call).
Ⴠ To upload the video clip to a compatible online
album, select
(only available if you have set
up an account for a compatible online album).
See "Share images and videos online", p. 56.
Ⴠ To return to the viewfinder to record a new video
clip, press the capture key.
Ⴠ Image quality — Select Print 5M - Large
(2592x1944 resolution), Print 3M - Medium
(2048x1536 resolution), Print 2M - Medium
(1600x1200 resolution), E-mail 0.8M - Med.
(1024x768 resolution), or MMS 0.3M - Small
(640x480 resolution). The better the image
quality, the more memory the image consumes.
If you want to print the image, select Print 5M Large, Print 3M - Medium, or Print 2M Medium. If you want to send it using e-mail,
select E-mail 0.8M - Med.. To send the image
using a multimedia message, select MMS 0.3M Small.
Camera settings
There are two kinds of settings for the camera:
setup settings and main settings. The setup settings
return to the default settings after you close the
camera, but the main settings remain the same
until you change them again. To adjust the setup
settings, use the options in the active toolbar. See
"Setup settings—adjust colour and
lighting", p. 50. To change the main settings, in
the image or video mode, select Options
Settings.
Still image camera settings
To change the main settings, in the image mode,
select OptionsSettings and from the following:
Ⴠ
Ⴠ
Ⴠ
Ⴠ
These resolutions are only available in the main
camera.
Add to album — Select whether you want to
save the image to a certain album in Gallery. If
you select Yes, a list of available albums opens.
Show captured image — Select On if you want
to see the captured image after it is taken or
Off if you want to continue taking pictures
immediately.
Default image name — Define the default
name for the captured images.
Extended digital zoom (main camera only)
— On (continuous) allows the zoom increments
to be smooth and continuous between digital
and extended digital zoom, On (paused) allows
the zoom increments to pause at the digital and
Cyan Magenta Yellow Black
Camera
able to send video clips saved in the .mp4 file
format in a multimedia message.
49
Camera
Ⴠ
Ⴠ
Ⴠ
Ⴠ
extended digital step point, and Off allows a
limited amount of zoom while retaining the
image resolution.
Capture tone — Select the tone you want to
hear when you take a picture.
Memory in use — Select where you want to
store your images.
Rotate image — Select whether you want
images that are captured when the device is held
upright to be rotated when you open them in
Gallery.
Restore camera settings — Select Yes to return
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and
lighting more accurately or to add effects to your
pictures or videos, scroll through the active toolbar,
and select from the following options:
50
Ⴠ Flash mode ( ) (images only) — Select the
desired flash mode.
Ⴠ Colour tone ( ) — Select a colour effect from
the list.
Ⴠ White balance ( ) — Select the current
lighting condition from the list. This allows the
camera to reproduce colours more accurately.
Ⴠ Exposure compensation ( ) (images
only) — If you are shooting a dark subject against
a very light background, such as snow, adjust the
exposure to +1 or +2 to compensate the
background brightness. For light subjects
against a dark background, use -1 or -2.
Ⴠ Sharpness ( ) (images only) — Adjust the
sharpness of the image.
Ⴠ Contrast ( ) (images only) — Adjust the
difference between the lightest and darkest
parts of the image.
Ⴠ Light sensitivity ( ) (images only) — Increase
the light sensitivity in low light conditions to
decrease the risk of images that are too dark.
The screen display changes to match any settings
you make so that you see how the change affects
the pictures or videos.
The available settings vary depending on the
selected camera.
The setup settings are camera specific; if you
change the settings in the secondary camera, the
settings in the main camera do not change. The
setup settings are also shooting mode specific; if
you change the settings in the image mode, the
settings in the video mode do not change.
Switching between the modes does not reset the
defined setup settings.
Cyan Magenta Yellow Black
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
For more information on the scenes, see the
extended user guide on the product support pages
of the Nokia website.
Video settings
Ⴠ
Ⴠ
Ⴠ
Ⴠ
To change the main settings, in the video mode,
select OptionsSettings and from the following:
Ⴠ Video quality — Set the quality of the video clip
to TV high quality, TV normal quality, E-mail
high quality, E-mail norm. quality (standard
quality for playback through your handset), or
Sharing quality. If you want to view the video
on a compatible TV or PC, select TV high
quality or TV normal quality, which have VGA
resolution (640x480) and the .mp4 file format.
You may not be able to send video clips saved in
the .mp4 file format in a multimedia message. To
Ⴠ
Ⴠ
Ⴠ
send the video clip using a multimedia message,
select Sharing quality, which has QCIF
resolution and the .3gp file format.
Video stabilisation — Select On to reduce
camera shaking when recording the video.
Audio recording — Select Mute if you do not
want to record sound.
Add to album — Select whether you want to
add the recorded video clip to a certain album in
Gallery. Select Yes to open a list of available
albums.
Show captured video — Select whether you
want the first frame of the recorded video clip to
be displayed after the recording stops. Select
Play from the active toolbar (main camera) or
OptionsPlay (secondary camera) to view the
video clip.
Default video name — Define the default name
for the captured video clips.
Memory in use — Select where you want to
store your videos.
Restore camera settings — Select Yes to return
the default values to the camera settings.
Camera
The setup settings return to the default settings
when you close the camera.
51
Cyan Magenta Yellow Black
Gallery
Gallery
To store and organise your images, video clips,
sound clips, and streaming links, or share your files
with other compatible Universal Plug and Play
(UPnP) devices through wireless LAN (WLAN), press
, and select Gallery.
Tip: If you are in another application, to view
the last saved picture in Gallery, press
on the side of your device. To enter the
Images & videos folder main view, press the
review key again.
For information on presentations, printing, and
organising and editing images and videos, see the
extended user guide on the product support pages
of the Nokia website.
To open a file, press the
scroll key. Video clips, .ram
files, and streaming links
open and play in
RealPlayer, and music and
sound clips in Music player. See "RealPlayer
", p. 41. See "Music player", p. 33.
View and organise files
Images and video clips
Press
View images and videos
, and select Gallery.
In Gallery, select Images & videos , Tracks ,
Sound clips , Streaming links
Presentations , or All files , and press the scroll
key to open it.
52
You can browse and open
folders; and mark, copy,
and move items to folders.
You can also create albums
and mark, copy, and add
items to albums. See
"Albums", p. 54.
To view your images and video clips, press
select GalleryImages & videos.
, and
Pictures taken and video clips recorded with the
camera of your device are stored in Images &
videos. Images and video clips can also be sent to
you in a multimedia message, as an e-mail
Cyan Magenta Yellow Black
To edit a video clip or a photo, select Options
Edit.
The video clips saved in Nokia Video Centre are not
shown in Images & videos in Gallery. See "Nokia
Video Centre", p. 30.
In the Images & videos folder, you can use the
active toolbar as a shortcut to different tasks. The
active toolbar is available only when you have
selected an image or a video clip.
The images and
video clip files in
Images & videos
are in a loop and
ordered by date
and time. The
number of files is
displayed. To
browse the files
one by one, scroll
left or right. To browse files in groups, scroll up or
down.
To open a file, press the scroll key. When an image
is opened, to zoom in the image, press the zoom
key on the side of your device. The zooming ratio is
not stored permanently.
If you want the display to be automatically rotated
based on the orientation of the device, set the
display rotation on in the settings. See
"Personalisation settings", p. 90.
Active toolbar
Gallery
attachment, or through Bluetooth connectivity or
infrared. To be able to view a received image or
video clip in Gallery or in the RealPlayer, you must
first save it.
In the active toolbar, scroll up or down to different
items, and select them by pressing the scroll key.
The available options vary depending on the view
you are in and whether you have selected an image
or a video clip.
The settings in the active toolbar return to the
default settings after you close the camera.
If you want the active toolbar to always be visible
on the display, select OptionsShow icons.
To view the active toolbar only when you need it,
select OptionsHide icons. To activate the active
toolbar, press the scroll key.
Select from the following:
to play the selected video clip
to send the selected image or video clip
to upload the selected image or video clip to a
compatible online album (only available if you have
Cyan Magenta Yellow Black
53
Gallery
set up an account for a compatible online album).
See "Share images and videos online", p. 56.
or
to add or remove an image from the print
basket.
to print the viewed image
to start a slide show of your images
to delete the selected image or video clip
The available options may vary depending on the
view you are in.
Albums
With albums, you can conveniently manage your
images and video clips. To view the albums list in
Gallery, select Images & videosOptions
AlbumsView albums.
To create a new album, in the albums list view,
select OptionsNew album.
To add a picture or a video clip to an album in
Gallery, scroll to a picture or video clip, and select
OptionsAlbumsAdd to album. A list of
albums opens. Select the album to which you want
to add the picture or video clip. The item you added
to the album is still visible in Images & videos in
Gallery.
54
To remove a file from an album, open the album,
scroll to the file, and press C. The file is not deleted
from Images & videos in Gallery.
Slide show
To view your images as a slide show, select an
image in Gallery, and Start slide show ( ) in the
active toolbar. The slide show starts from the
selected file.
To view only the selected images as a slide show,
select OptionsMark/UnmarkMark to mark
images, and OptionsSlide showStart to
start the slide show.
Select from the following:
Ⴠ Pause — to pause the slide show
Ⴠ Continue — to resume the slide show, if paused
Ⴠ End — to close the slide show
To browse the images, scroll left or right.
Before starting the slide show, adjust the slide show
settings. Select OptionsSlide show
Settings, and from the following:
Ⴠ Music — to add sound to the slide show. Select
On or Off.
Ⴠ Song — to select a music file from the list
Ⴠ Delay between slides — to adjust the tempo
of the slide show
Cyan Magenta Yellow Black
To decrease or increase the volume during the slide
show, use the volume key in your device.
TV-out mode
To view the captured images and video clips on a
compatible TV, use a Nokia Video Connectivity Cable.
Before viewing the images and video clips on TV,
you may need to configure the TV-out settings for
the applicable TV system and TV aspect ratio. See
"Enhancement settings", p. 91.
To watch images and video clips on TV, do the
following:
1. Connect a Nokia Video Connectivity Cable to the
video input of a compatible TV.
2. Connect the other end of the Nokia Video
Connectivity Cable to the Nokia AV Connector of
your device.
3. You may need to select the cable mode.
4. Press , and select GalleryImages &
videos and the file you want to view.
The images are
shown in the
image viewer,
and the video
clips are played
in RealPlayer.
Gallery
Ⴠ Zoom and pan — to make the slide show move
smoothly from one slide to another, and let
Gallery randomly zoom in and out in the images
All audio,
including the
active calls, stereo video clip sound, key tone, and
ringing tone is routed to the TV when the Nokia
Video Connectivity Cable is connected to the device.
You can use the device microphone normally.
For all applications other than the Images &
videos folder in Gallery and RealPlayer, the TV
screen displays what is displayed on the screen of
your device.
The opened image is displayed in full-screen on the
TV. When you open an image in the thumbnail view
while it is viewed on the TV, zooming in is not
available.
When you open a highlighted video clip, RealPlayer
starts playing the video clip on the device display
and the TV screen. See "RealPlayer ", p. 41.
You can view images as a slide show on TV. All items
in an album or marked images are displayed on the
TV in full-screen while the selected music plays. See
"Slide show", p. 54.
Cyan Magenta Yellow Black
55
Positioning (GPS)
Share images and videos
online
You can share images and video clips in compatible
online albums, weblogs, or in other compatible
online sharing services on the web. You can upload
content, save unfinished posts as drafts and
continue later, and view the content of the albums.
The supported content types may vary depending
on the service provider.
Before sharing images and videos online, you must
subscribe to the service with an online image
sharing service provider, and create a new account.
You can usually subscribe to the service on the web
page of the service provider. Contact your service
provider for details on subscribing to the service.
To upload a file from Gallery to the online service,
press , and select GalleryImages & videos.
Scroll to the desired file, and select Options
from
SendPost to web, or select the file and
the active toolbar.
For more information on the application and
compatible service providers, see the Nokia product
support pages or your local Nokia website.
About home network
Your device is compatible with Universal Plug and
Play architecture (UPnP). Using a wireless LAN
(WLAN) access point device or a WLAN router, you
can create a home network and connect compatible
UPnP devices that support WLAN to the network,
such as your device, a compatible PC, a compatible
printer, and a compatible sound system or TV, or a
sound system or TV equipped with a compatible
wireless multimedia receiver.
For more information on the home network, see the
extended user guide on the product support pages
of the Nokia website.
Positioning (GPS)
56
For information on position requests and
landmarks, see the extended user guide on the
product support pages of the Nokia website.
Cyan Magenta Yellow Black
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites
and their ground stations that monitor the
operation of the satellites. Your device has an
internal GPS receiver.
A GPS terminal receives low-power radio signals
from the satellites and measures the travel time of
the signals. From the travel time, the GPS receiver
can calculate its location to the accuracy of meters.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by
the government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by
adjustments to GPS satellites made by the United
States government and is subject to change with
the United States Department of Defense civil GPS
policy and the Federal Radionavigation Plan.
Accuracy can also be affected by poor satellite
geometry. Availability and quality of GPS signals
may be affected by your location, buildings, natural
obstacles, and weather conditions. The GPS receiver
should only be used outdoors to allow reception of
GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular
radio networks for positioning or navigation.
Your device also supports Assisted GPS (A-GPS).
Assisted GPS (A-GPS) is used to retrieve assistance
data over a packet data connection, which assists in
calculating the coordinates of your current location
when your device is receiving signals from
satellites.
Positioning (GPS)
About GPS
A-GPS is a network service.
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider specific A-GPS settings
are available. The assistance data is retrieved from
the Nokia A-GPS service server only when needed.
You must have a packet data internet access point
defined in the device to retrieve assistance data
from the Nokia A-GPS service. To define an access
point for A-GPS, press , and select Tools
SettingsGeneralPositioning
Positioning serverAccess point. A wireless LAN
access point cannot be used for this service. The
packet data internet access point is asked when GPS
is used for the first time in your device.
To enable or disable different positioning methods,
such as Bluetooth GPS, press , and select Tools
SettingsGeneralPositioning
Positioning methods.
Cyan Magenta Yellow Black
57
Positioning (GPS)
GPS receiver
About satellite signals
The GPS receiver is located in the bottom of the
device. When using the receiver, slide the numeric
keypad open, and from an upright position, move
the device to an angle of about 45 degrees, with an
unobstructed view of the sky. Do not cover the
numeric keypad with your hand.
If your device cannot find the satellite signal,
consider the following:
Ⴠ If you are indoors, go outdoors to receive a better
signal.
Ⴠ If the numeric keypad slide is closed, open it.
Ⴠ If you are outdoors, move to a more open space.
Establishing a GPS
connection may take
from a couple of
seconds to several
minutes. Establishing
a GPS connection in
the car may take
longer.
Establishing a GPS
connection may take from a couple of seconds to
tens of minutes. Establishing a GPS connection in
the car, in bad weather conditions, or in a
challenging geographical environment may take
longer.
The GPS receiver draws its power from the device
battery. Using the GPS receiver may drain the
battery faster.
Ⴠ Ensure that
your hand does
not cover the
GPS antenna of
your device.
See "GPS
receiver"
, p. 58.
Ⴠ If the weather
conditions are bad, the signal strength may be
affected.
Ⴠ If the power saver turns on while the device is
attempting to establish a GPS connection, the
attempt is interrupted.
Ⴠ Establishing a GPS connection may take from a
couple of seconds to several minutes.
Ⴠ Establishing a GPS connection may take from a
couple of seconds to tens of minutes.
58
Cyan Magenta Yellow Black
To check how many satellites your device has found,
and whether your device is receiving satellite
signals, press , and select Tools
ConnectivityGPS dataPosition
OptionsSatellite status. Or, in the Maps
application, select OptionsMap options
Satellite info.
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The
longer the bar, the
stronger the satellite
signal. When your device
has received enough data
from the satellite signal to
calculate the coordinates
of your location, the bar
turns black.
Initially your device must
receive signals from at
least four satellites to be
able to calculate the
coordinates of your
location. When the initial
calculation has been made,
it may be possible to
continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
Maps
Map availability varies by country /region. To the
maximum extent permitted by the applicable law,
Nokia disclaims any and all warranty with respect
to the availability, accuracy, correctness or update
of maps.
Positioning (GPS)
Satellite status
About Maps
Press
, and select Maps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, and save
locations as landmarks and send them to
compatible devices.
You can also purchase extra services, such as guides
and a turn-by-turn navigation service with voice
guidance.
Maps uses GPS. You can define the positioning
methods used with your device in the device
settings. See "Positioning settings", p. 94. For the
most accurate location information, use either the
internal GPS or a compatible external GPS receiver.
Cyan Magenta Yellow Black
59
Positioning (GPS)
When you use Maps for the first time, you may need
to define an internet access point for downloading
map information for your current location. To
change the default access point later, select
OptionsSettingsNetworkDefault
access point.
session, the Maps application zooms in to the
capital city of the country you are in based on the
information the device receives from the cellular
network. At the same time, the map of the location
is downloaded, if it has not been downloaded
during previous sessions.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography provided for use in this device.
To establish a GPS connection and zoom in to your
current location, select OptionsFind place
GPS position [0], or press 0
Downloading maps may involve the transmission of
large amounts of data through your service
provider's network. Contact your service provider
for information about data transmission charges.
is shown on the display
A GPS indicator
when you browse maps. When the device tries to
establish a GPS connection, the circles are yellow.
When the device receives enough data from the
satellites to calculate the coordinates of your
current location, the circles turn green.
Tip: You can also download maps by using a
wireless LAN connection or through the
internet using Nokia Map Loader PC software.
See "Download maps", p. 61.
To receive a note when your device registers to a
network outside your home cellular network, select
OptionsSettingsNetworkRoaming
warningOn. Contact your network service
provider for details and roaming costs.
To view information about satellites when you are
using Maps, select OptionsMap options
Satellite info.
Your current location is indicated on the map with
Browse maps
The map coverage varies by country.
60
When you open the Maps application, Maps zooms
in to the location that was saved from your last
session. If no position was saved from the last
Cyan Magenta Yellow Black
To define what kinds of points of interest are shown
on the map, select OptionsMap options
Categories and the desired categories.
To zoom in or out, press *
or #.
To switch between the 2D
and 3D views, select
OptionsMap
options2D/3D.
To find a location, select
OptionsFind place.
You can choose to go to
your GPS position, find an address, find a point of
interest by entering a keyword, find locations
nearby, or browse a guide (extra service).
To use a location on the map, for example, as a
starting point for a nearby search, to plan a route,
view its details, or start navigation (extra service),
press the scroll key, and select the desired option.
When you browse the map on the display, for
example, move to another country, a new map is
downloaded automatically. These downloaded
maps are free of charge, but downloading may
involve the transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider.
To save a location as a landmark, in the desired
location, press the scroll key, select SaveAs
landmark, enter a name for the landmark, and
select the categories you want to include it in. To
take a screen shot of your location, select Save
As image. The screen shot is saved in Gallery. To
send the screen shot, in Gallery, select the screen
from the active toolbar.
shot, and
Positioning (GPS)
The maps are automatically saved in the device
memory.
To move on the map, scroll
up, down, left, or right.
To view saved landmarks, select OptionsFind
placeLandmarks.
To send a landmark to a compatible device, in the
landmarks view, press the scroll key, and select
Send. If you send the landmark in a text message,
the information is converted to plain text.
To adjust the network, routing, and general
settings, select OptionsSettings.
Download maps
When you browse the map on the display, for
example, move to another country, a new map is
downloaded automatically. These downloaded
maps are free of charge, but downloading may
Cyan Magenta Yellow Black
61
Positioning (GPS)
involve transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider.
You can view the amount of transferred data from
the data counter (kB) shown on the display. The
counter shows the amount of network traffic when
you browse maps, create routes, or search for
locations online.
To prevent the device from automatically
downloading maps through the internet, for
example, when you are outside your home cellular
network, select OptionsSettingsNetwork
Use networkNever.
To define how much of the mass memory you want
to use for saving maps data or voice guidance files,
select OptionsSettingsNetworkMax.
mass mem. use (%). When the memory is full, the
oldest map data is deleted. The saved maps data can
be deleted using Nokia Map Loader PC software.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to
download and install maps for different countries
to your device from the internet. You can also use it
to download voice files for turn-by-turn navigation.
62
To use Nokia Map Loader, you must first install it to
a compatible PC. You can download the PC software
from the internet at www.nokia.com/maps. Follow
the instructions on the screen.
You must use the Maps application before using
Nokia Map Loader. Nokia Map Loader uses the Maps
history information to check the version of map
data to be downloaded.
After you have installed the PC software to your PC,
to download maps, do the following:
1. Connect your device to the PC by using a
compatible USB data cable. Select Mass
storage as the USB connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
3. Select the maps or voice guidance files you want,
and download and install them to your device.
Find a place
To view points of interest near your current location
or other locations on the map, select Options
Find placeNearby and a category.
To search for a point of interest by name, select
OptionsFind placeKeyword search or start
entering the first letters of the name, and select
Find.
To search for a location by address, select
OptionsFind placeBy address. You must
Cyan Magenta Yellow Black
To view a search result on the map, press the scroll
key, and select Show on map. To return to the
results list, select Back.
To view a list of your previous locations, select
OptionsFind placeRecent.
Plan a route
To plan a route from one location to another (for
example, from your home to your office), do the
following:
1. Scroll to a point on the map, press the scroll key,
and select Route from.
2. Scroll to From, and select OptionsSelect and
the desired option.
To adjust the routing settings, such as the mode
of transportation, select OptionsSettings
Routing.
3. To select the destination, scroll to To, and select
OptionsSelect and the desired option.
4. To view the route itinerary, select Options
Show route. The route is calculated using the
selected routing settings.
To view the itinerary route on the map, select
OptionsShow on map.
To run a simulation of the route, select Options
Start simulation.
Tip: You can also use a compatible GPS
receiver with Bluetooth connectivity with
Maps. For example, in a car, an external GPS
receiver can be positioned so that it has a
clear view of the sky. Enable the use of an
external GPS receiver in positioning settings.
See "Positioning settings", p. 94.
Positioning (GPS)
enter the city and country. To use an address you
have saved to a contact card in Contacts, select
OptionsFind placeBy addressOptions
Select from contacts.
Extra services for Maps
You can purchase and download different kinds of
guides, such as city and travel guides, for different
cities to your device. You can also purchase a turnby-turn navigation service with voice guidance to
use it in Maps.
The downloaded guides are automatically saved to
your device.
The licence you purchase for a guide or navigation
is device-specific and cannot be transferred from
your device to another device.
Navigation
To purchase a navigation service with voice
guidance to use in Maps, select OptionsExtra
servicesAdd navigation.
Cyan Magenta Yellow Black
63
Positioning (GPS)
After purchasing the navigation upgrade, the
service is available through Maps.
cities to your device, select OptionsExtra
servicesGuides.
After creating a route in Maps, to start navigation to
the desired destination with GPS using voice
guidance, select OptionsStart navigation. See
"Plan a route", p. 63. You can also start navigation
by selecting any location on the map or in a results
list, and Navigate to.
The guides provide information about attractions,
restaurants, hotels, and other points of interest. The
guides must be downloaded and purchased before
use.
When you use navigation for the first time, you are
prompted to select the language of the voice
guidance and download the voice guidance files of
the selected language. You can also download voice
guidance files using Nokia Map Loader. See
"Download maps", p. 61. To change the language
later, in the Maps main view, select Options
SettingsGeneralVoice guidance and a
language, and download the voice guidance files
for the selected language.
To discard the created route and use another route,
select OptionsAlternative route.
To view only the next turns and hide the map, select
OptionsMap optionsNext turns.
To stop navigation, select OptionsStop
navigation.
Guides
64
To purchase and download different kinds of
guides, such as city and travel guides, for different
To browse a downloaded guide, on the My guides
tab in Guides, select a guide and a subcategory (if
available).
To download a new guide to your device, in Guides,
scroll right to the Nearest guides or All guides tab,
select the desired guide, and press Yes. The
purchase process starts automatically. You can pay
for the guides through a credit card or have the
amount charged to your phone bill (if supported by
your cellular network service provider).
To confirm the purchase, select OK twice. To receive
a confirmation of the purchase through e-mail,
enter your name and e-mail address, and select
OK.
GPS data
GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and
traveling information, such as the approximate
Cyan Magenta Yellow Black
Press
data.
, and select ToolsConnectivityGPS
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device
must initially receive position information from at
least four satellites to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when
more satellites are found.
For more information on GPS data, see the extended
user guide on the product support pages of the
Nokia website.
Retrieve position information
To save your current location as a landmark, select
OptionsSave position. Landmarks are saved
locations with more information, and they can be
used in other compatible applications and
transferred between compatible devices.
Trip meter
Press , and select ToolsConnectivityGPS
dataTrip distance.
Select OptionsStart to activate trip distance
calculation, and Stop to deactivate it. The
calculated values remain on the display. Use this
feature outdoors to receive a better GPS signal.
Personalise your device
distance to the destination and approximate
duration of travel.
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start
a new calculation. Select Restart to set the
odometer and total time to zero.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Press , and select ToolsConnectivityGPS
dataPosition.
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
65
Cyan Magenta Yellow Black
Personalise your device
Personalise your device
You can personalise your device by changing the
standby mode, main menu, tones, themes, or font
size. Most of the personalisation options, such as
changing the font size, can be accessed through the
device settings. See "Personalisation
settings", p. 90.
To change the layout of the main menu, select Menu
view.
For information on 3-D tones, see the extended user
guide on the product support pages of the Nokia
website.
To edit the wallpaper and power saver of the
current theme that appear in the standby mode,
select Wallpaper to change the background image
or Power saver to change the power saver.
Themes
Press , and select ToolsSettings
GeneralPersonalisationThemes.
You can change the look of the display, such as the
wallpaper and icons.
To change the theme that is used for all the
applications in your device, select General.
To preview a theme before activating it, select
OptionsPreview. To activate the theme, select
OptionsSet. The active theme is indicated by
66
Important: Use only services that you trust
and that offer adequate security and protection
against harmful software.
Profiles—set tones
Press
, and select ToolsProfiles.
You can set and customise the ringing tones,
message alert tones, and other tones for different
events, environments, or caller groups.
To change the profile, select a profile, and
OptionsActivate. To also change the profile,
press the power key in the standby mode. Scroll to
the profile you want to activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold
#.
Cyan Magenta Yellow Black
If you want the caller’s name to be spoken when
your device rings, select OptionsPersonalise,
and set Say caller's name to On. The caller’s name
must be saved in Contacts.
To create a new profile, select OptionsCreate
new.
Modify the standby mode
To switch the active standby on or off, press , and
select ToolsSettingsGeneral
PersonalisationStandby modeActive
standby. The active standby display shows
application shortcuts, and
events from applications
such as calendar and
player.
To change the selection
key shortcuts or the
default shortcut icons in
the active standby mode, select Tools
SettingsGeneralPersonalisation
Standby mode. Some shortcuts may be fixed, and
you cannot change them.
To change the clock shown in the standby mode,
press , and select ApplicationsClock
OptionsSettingsClock type.
You can also change the standby mode background
image or what is shown in the power saver. See
"Themes", p. 66.
Time management
To modify a profile, scroll to the profile, and select
OptionsPersonalise.
Modify the main menu
To change the main menu view, in the main menu,
select OptionsChange Menu viewGrid or
List.
To rearrange the main menu, in the main menu,
select OptionsMove, Move to folder, or New
folder. You can move less used applications into
folders and place applications that you use more
often into the main menu.
To use animated icons in your device, in the main
menu, select OptionsIcon animationOn.
67
Cyan Magenta Yellow Black
Time management
Time management
Clock
To change the time, date, and clock type settings,
select OptionsSettings.
Alarm clock
To allow the mobile phone network to update the
time, date, and time zone information to your
device (network service), in the settings, select
Network operator timeAuto-update.
Press
, and select ApplicationsClock.
To set a new quick alarm, select OptionsNew
quick alarm. Quick alarms are set for the next 24
hours and they cannot be repeated.
To view your active and inactive alarms, scroll right
to the alarm tab. To set a new alarm, select
OptionsNew alarm. Define the repetition, if
is shown.
needed. When an alarm is active,
To turn off the sounding alarm, select Stop. To stop
the alarm for 5 minutes, select Snooze.
68
World clock
Press
, and select ApplicationsClock.
To open the world clock view, scroll right to the
world clock tab. In the world clock view, you can
view the time in different cities. To add cities to the
list, select OptionsAdd city. You can add a
maximum of 15 cities to the list.
If the alarm time is reached while the device is
switched off, the device switches itself on and starts
sounding the alarm tone. If you select Stop, the
device asks whether you want to activate the device
for calls. Select No to switch off the device or Yes to
make and receive calls. Do not select Yes when
wireless phone use may cause interference or
danger.
To set your current city, scroll to a city, and select
OptionsSet as current city. The city is displayed
in the clock main view, and the time in your device
is changed according to the city selected. Ensure
that the time is correct and matches your time zone.
To cancel an alarm, select OptionsRemove
alarm.
For more information, see the extended user guide
on the product support pages of the Nokia website.
Calendar
Cyan Magenta Yellow Black
Press
, and select ApplicationsCalendar.
1. To add a new calendar
entry, scroll to the
desired date, and
select OptionsNew
entry and one of the
following:
entry opens, and the characters you enter are
added to the subject field. In the to-do view,
a to-do note entry opens.
When the calendar alarm sounds for a note, select
Silence to turn off the calendar alarm tone. The
reminder text stays on the screen. To stop the
calendar alarm, select Stop. To set the alarm to
snooze, select Snooze.
Ⴠ Meeting — to
remind you of an
appointment that
has a specific date
and time
Ⴠ Memo — to write a
general entry for a day
Ⴠ Anniversary — to remind you of birthdays or
special dates (entries are repeated annually)
Ⴠ To-do — to remind you of a task that must be
done by a specific date
2. Fill in the fields. To set an alarm, select Alarm
On, and enter the alarm time and date.
To add a description for an entry, select
OptionsAdd description.
3. To save the entry, select Done.
Tip: In the day, week, or month calendar
view, press any key (1-0). An appointment
Messaging
Create a calendar entry
Calendar views
To change the starting day of the week or the view
that is shown when you open the calendar, select
OptionsSettings.
To go to a certain date, select OptionsGo to
date. To jump to today, press #.
To switch between the month view, week view, day
view, and to-do view, press *.
To send a calendar note to a compatible device,
select OptionsSend.
If the other device is not compatible with
Coordinated Universal Time (UTC), the time
information of received calendar entries may not be
displayed correctly.
To modify the calendar, select Options
SettingsCalendar alarm tone, Default view,
Week starts on, or Week view title.
Cyan Magenta Yellow Black
69
Messaging
Messaging
Only devices that have compatible features can
receive and display multimedia messages. The
appearance of a message may vary depending on
the receiving device.
For more information on messaging, see the
extended user guide on the product support pages
of the Nokia website.
Messaging main view
Press
Messaging contains the following folders:
Inbox — Received messages, except e-mail
and cell broadcast messages, are stored here.
Ⴠ
My folders — Organise your messages into
folders.
Ⴠ
Tip: To avoid rewriting messages that you
send often, use texts in the Templates folder
in My folders. You can also create and save
your own templates.
Ⴠ
Ⴠ
Ⴠ
, and select Messaging (network service).
To create a new message, select New message.
70
Ⴠ
Mailbox — Connect to your remote mailbox
to retrieve your new e-mail messages, or view
Ⴠ
your previously retrieved e-mail messages
offline.
Drafts — Draft messages that have not been
sent are stored here.
Sent — The last messages that have been
sent, excluding messages sent using Bluetooth
connectivity or infrared, are stored here. You can
change the number of messages to save in this
folder.
Outbox — Messages waiting to be sent are
temporarily stored in the outbox, for example,
when your device is outside network coverage.
Reports — You can request the network to
send you a delivery report of the text messages
and multimedia messages you have sent
(network service).
Write and send messages
Press
, and select Messaging.
Before you can create a multimedia message or
write an e-mail, you must have the correct
connection settings in place. See "Define the e-mail
settings", p. 73.
Cyan Magenta Yellow Black
Check the size limit of e-mail messages with your
service provider. If you attempt to send an e-mail
message that exceeds the size limit of the e-mail
server, the message is left in the Outbox folder, and
the device attempts to resend it periodically.
Sending an e-mail requires a data connection, and
continuous attemps to resend the e-mail may
increase your phone bill. In the Outbox folder, you
can delete such a message or move it to the
Drafts folder.
1. Select New messageText message to send
a text message, Multimedia message to send a
multimedia message (MMS), Audio message to
send an audio message (a multimedia message
that includes one sound clip), or E-mail to send
an e-mail.
2. In the To field, press
the scroll key to select
recipients or groups
from contacts, or enter
the recipient’s phone
number or e-mail
address. To add a
semicolon (;) that
separates the
recipients, press *. You
can also copy and paste
the number or address
from the clipboard.
Messaging
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit,
the device may make it smaller so that it can be sent
by MMS.
3. In the Subject field, enter the subject of the
multimedia message or e-mail. To change the
fields that are visible, select OptionsAddress
fields.
4. In the message field, write the message. To
insert a template, select OptionsInsert or
Insert objectTemplate.
5. To add a media object to a multimedia message,
select OptionsInsert objectImage,
Sound clip, or Video clip.
6. To take a new picture or record sound or video
for a multimedia message, select Insert new
Image, Sound clip, or Video clip.
To insert a new slide to the message, select
Slide.
Cyan Magenta Yellow Black
71
Messaging
To see what the multimedia message looks like,
select OptionsPreview.
Tip: You can combine images, video, sound,
and text to a presentation and send it in a
multimedia message. Start to create a
multimedia message, and select Options
Create presentation. The option is shown
only if MMS creation mode is set to Guided
or Free. See "Multimedia message
settings", p. 76.
7. To add an attachment to an e-mail, select
OptionsInsertImage, Sound clip, Video
clip, Note, or Other for other file types. E-mail
attachments are indicated by .
8. To send the message, select OptionsSend,
or press the call key.
Note: Your device may indicate that your
message was sent to the message center number
programmed into your device. Your device may not
indicate whether the message is received at the
intended destination. For more details about
messaging services, contact your service provider.
Your device supports the sending of text messages
beyond the character limit for a single message.
Longer messages are sent as a series of two or more
messages. Your service provider may charge
accordingly. Characters that use accents or other
marks, and characters from some language options,
take up more space, limiting the number of
characters that can be sent in a single message.
You may not be able to send video clips that are
saved in the .mp4 format or that exceed the size
limit of the wireless network in a multimedia
message.
Messaging inbox
Receive messages
Press
, and select MessagingInbox.
indicates an unread text
In the Inbox folder,
an
message, an unread multimedia message,
data received through
unread audio message,
data received through Bluetooth
infrared, and
connectivity.
and 1 new
When you receive a message,
message are shown in the standby mode. To open
the message, select Show. To open a message in
Inbox, scroll to it, and press the scroll key. To reply
to a received message, select OptionsReply.
72
Cyan Magenta Yellow Black
Mailbox
Important: Exercise caution when opening
messages. Multimedia message objects may
contain malicious software or otherwise be harmful
to your device or PC.
Define the e-mail settings
You may receive a notification that a multimedia
message is waiting in the multimedia message
centre. To start a packet data connection to retrieve
the message to your device, select Options
Retrieve.
To use e-mail, you must have a valid internet access
point (IAP) in the device and define your e-mail
settings correctly. See "Access points", p. 96. See
"E-mail settings", p. 76.
When you open a multimedia message ( ), you
is shown if
may see an image and a message.
if video is included. To play
sound is included, or
the sound or the video, select the indicator.
To see the media objects that have been included
in the multimedia message, select Options
Objects.
If the message includes a multimedia presentation,
is displayed. To play the presentation, select the
indicator.
Tip: Use Settings wizard to define your
mailbox settings. Press , and select Tools
UtilitiesSett. wizard.
Messaging
Multimedia messages
You must have a separate e-mail account. Follow
the instructions given by your remote mailbox and
internet service provider (ISP).
If you select Mailbox in the Messaging main view
and have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail
settings with the mailbox guide, select Start.
When you create a new mailbox, the name you give
to the mailbox replaces Mailbox in the Messaging
main view. You can have up to six mailboxes.
Open the mailbox
Press
, and select Messaging and a mailbox.
When you open the mailbox, the device asks if you
want to connect to the mailbox (Connect to
mailbox?).
Cyan Magenta Yellow Black
73
Messaging
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected
to a remote mailbox using a data connection.
To view previously retrieved e-mail messages
offline, select No.
To create a new e-mail message, select New
messageE-mail in the Messaging main view or
OptionsCreate messageE-mail in your
mailbox. See "Write and send messages", p. 70.
Retrieve e-mail messages
3. To open an e-mail message, press the scroll key.
If the e-mail message has not been retrieved and
you are offline, you are asked if you want to
retrieve this message from the mailbox.
To view e-mail attachments, open the message, and
select the attachment field indicated by . If the
attachment has a dimmed indicator, it has not been
retrieved to the device; select Options
Retrieve.
If you are offline, select OptionsConnect to start
a connection to the remote mailbox.
To retrieve e-mail messages automatically, select
OptionsE-mail settingsAutomatic
retrieval. See "Automatic retrieval
settings", p. 78.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or
PC.
Setting the device to retrieve e-mail automatically
may involve the transmission of large amounts of
data through your service provider's network.
Contact your service provider for information about
data transmission charges.
Press
, and select Messaging and a mailbox.
1. When you have an open connection to a remote
mailbox, select OptionsRetrieve e-mail
New to retrieve all new messages, Selected to
retrieve only the messages that have been
marked, or All to retrieve all messages from the
mailbox.
74
2. To close the connection and view the e-mail
messages offline, select Options
Disconnect.
To stop retrieving messages, select Cancel.
Delete e-mail messages
Press
, and select Messaging and a mailbox.
To delete the contents of an e-mail message from
the device while still retaining it in the remote
Cyan Magenta Yellow Black
The device mirrors the e-mail headings in the
remote mailbox. Although you delete the message
content, the e-mail heading stays in your device. If
you want to remove the heading as well, you must
first delete the e-mail message from your remote
mailbox, then make a connection from your device
to the remote mailbox again to update the status.
To delete an e-mail from the device and the remote
mailbox, select OptionsDeletePhone and
server.
To cancel deleting an e-mail from the device and
server, scroll to an e-mail that has been marked to
be deleted during the next connection , and
select OptionsRestore.
Disconnect from the mailbox
When you are online, to end the data connection to
the remote mailbox, select Options
Disconnect.
Messaging settings
The settings may be preconfigured in your device,
or you may receive them in a message. To enter
settings manually, fill in all fields marked with Must
be defined or an asterisk.
Some or all message centres or access points may
be preset for your device by your service provider,
and you may not be able to change, create, edit, or
remove them.
Text message settings
Messaging
mailbox, select OptionsDelete. In Delete
message from:, select Phone only.
Press , and select MessagingOptions
SettingsText message.
Select from the following:
Ⴠ Message centres — View a list of all text
message centres that have been defined.
Ⴠ Message centre in use — Select which message
centre to use to deliver text messages.
Ⴠ Character encoding — To use character
conversion to another encoding system when
available, select Reduced support.
Ⴠ Receive report — Select whether the network
sends delivery reports on your messages
(network service).
Ⴠ Message validity — Select how long the
message centre resends your message if the first
attempt fails (network service). If the message
cannot be sent within the validity period, the
message is deleted from the message centre.
Ⴠ Message sent as — Contact your service
provider to learn if your message centre is able
to convert text messages into these other
formats.
Cyan Magenta Yellow Black
75
Messaging
Ⴠ Preferred connection — Select the connection
to use.
Ⴠ Reply via same centre — Select whether you
want the reply message to be sent using the
same text message centre number (network
service).
Multimedia message settings
Press , and select MessagingOptions
SettingsMultimedia message.
Select from the following:
76
Ⴠ Image size — Define the size of the image in a
multimedia message.
Ⴠ MMS creation mode — If you select Guided, the
device informs you if you try to send a message
that may not be supported by the recipient. If you
select Restricted, the device prevents you from
sending messages that may not be supported. To
include content in your messages without
notifications, select Free.
Ⴠ Access point in use — Select which access point
is used as the preferred connection.
Ⴠ Multimedia retrieval — Select how you want
to receive messages. To receive messages
automatically in your home cellular network,
select Auto in home netw.. Outside your home
cellular network, you receive a notification that
there is a message to retrieve in the multimedia
message centre.
Outside your home cellular network, sending and
receiving multimedia messages may cost you more.
If you select Multimedia retrievalAlways
automatic, your device automatically makes an
active packet data connection to retrieve the
message both in and outside your home cellular
network.
Ⴠ Allow anon. msgs. — Select whether you want
to reject messages from an anonymous sender.
Ⴠ Receive adverts — Define whether you want to
receive multimedia message advertisements.
Ⴠ Receive report — Select whether you want the
status of the sent message to be shown in the log
(network service).
Ⴠ Deny report sending — Select whether you
want to deny your device sending delivery
reports of received messages.
Ⴠ Message validity — Select how long the
message centre resends your message if the first
attempt fails (network service). If the message
cannot be sent within the validity period, the
message is deleted from the message centre.
E-mail settings
Manage mailboxes
Press , and select MessagingOptions
SettingsE-mail.
Cyan Magenta Yellow Black
To remove a mailbox and its messages from your
device, select Mailboxes, scroll to the desired
mailbox, and press C.
To create a new mailbox, in Mailboxes, select
OptionsNew mailbox. The name you give to
the new mailbox replaces Mailbox in the Messaging
main view. You can have up to six mailboxes.
Select Mailboxes and a mailbox to change the
connection settings, user settings, retrieval
settings, and automatic retrieval settings.
Connection settings
Press , and select MessagingOptions
SettingsE-mailMailboxes, a mailbox, and
Connection settings.
To edit the settings for the e-mail you receive, select
Incoming e-mail, and from the following:
Ⴠ User name — Enter your user name given to you
by your service provider.
Ⴠ Password — Enter your password. If you leave
this field blank, you are prompted for the
password when you try to connect to your
remote mailbox.
Ⴠ Incoming mail server — Enter the IP address
or host name of the mail server that receives your
e-mail.
Ⴠ Access point in use — Select an internet access
point (IAP). See "Access points", p. 96.
Ⴠ Mailbox name — Enter a name for the mailbox.
Ⴠ Mailbox type — Defines the e-mail protocol that
your remote mailbox service provider
recommends. The options are POP3 and IMAP4.
This setting cannot be changed.
Ⴠ Security (ports) — Select the security option
used to secure the connection to the remote
mailbox.
Ⴠ Port — Define a port for the connection.
Ⴠ APOP secure login (for POP3 only) — Use with
the POP3 protocol to encrypt the sending of
passwords to the remote e-mail server while
connecting to the mailbox.
Messaging
To select which mailbox you want to use to send email, select Mailbox in use and a mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
Ⴠ My e-mail address — Enter the e-mail address
given to you by your service provider.
Ⴠ Outgoing mail server — Enter the IP address or
host name of the mail server that sends your email. You may only be able to use the outgoing
server of your service provider. Contact your
service provider for more information.
The settings for User name, Password, Access
point in use, Security (ports), and Port are similar
to the ones in Incoming e-mail.
Cyan Magenta Yellow Black
77
Messaging
User settings
Press , and select MessagingOptions
SettingsE-mailMailboxes, a mailbox, and
User settings.
Select from the following:
Ⴠ My name — Enter your own name. Your name
replaces your e-mail address in the recipient’s
device when the recipient’s device supports this
function.
Ⴠ Send message — Define how e-mail is sent from
your device. Select Immediately for the device
to connect to the mailbox when you select Send
message. If you select During next conn., email is sent when the connection to the remote
mailbox is available.
Ⴠ Send copy to self — Select whether you want
to send a copy of the e-mail to your own mailbox.
Ⴠ Include signature — Select whether you want
to attach a signature to your e-mail messages.
Ⴠ New e-mail alerts — Select whether you want
to receive the new e-mail indications (a tone, a
note, and a mail indicator) when new mail is
received.
Retrieval settings
78
Press , and select MessagingOptions
SettingsE-mailMailboxes, a mailbox, and
Retrieval settings.
Select from the following:
Ⴠ E-mail to retrieve — Define which parts of the
e-mail are retrieved: Headers only, Size limit
(POP3), or Msgs. & attachs. (POP3).
Ⴠ Retrieval amount — Define how many new email messages are retrieved to the mailbox.
Ⴠ IMAP4 folder path (for IMAP4 only) — Define
the folder path for folders to be subscribed.
Ⴠ Folder subscriptions (for IMAP4 only)
— Subscribe to other folders in the remote
mailbox, and retrieve content from those folders.
Automatic retrieval settings
Press , and select MessagingOptions
SettingsE-mailMailboxes, a mailbox, and
Automatic retrieval.
Select from the following:
Ⴠ E-mail notifications — To automatically
retrieve the headings to your device when you
receive new e-mail in your remote mailbox,
select Auto-update or Only in home netw..
Ⴠ E-mail retrieval — To automatically retrieve the
headings of new e-mail messages from your
remote mailbox at defined times, select
Enabled or Only in home netw.. Define when
and how often the messages are retrieved.
E-mail notifications and E-mail retrieval cannot
be active at the same time.
Setting the device to retrieve e-mail automatically
may involve the transmission of large amounts of
Cyan Magenta Yellow Black
Other settings
Press , and select MessagingOptions
SettingsOther.
multimedia messages, or e-mail that you send to
the Sent folder.
Ⴠ Number of saved msgs. — Define how many
sent messages are saved to the sent folder at a
time. When the limit is reached, the oldest
message is deleted.
Ⴠ Memory in use — Select the memory where you
want to save your messages.
Make calls
data through your service provider's network.
Contact your service provider for information about
data transmission charges.
Select from the following:
Ⴠ Save sent messages — Select whether you
want to save a copy of the text messages,
Make calls
For information on conference calls, speed dialling,
voice dialling, call waiting, and options during calls,
see the extended user guide on the product support
pages of the Nokia website. Video sharing is also
explained in the extended user guide.
(omit the leading zero if necessary), and phone
number.
2. Press the call key to call the number.
3. Press the end key to end the call (or to cancel the
call attempt).
Pressing the end key always ends a call, even if
another application is active.
Voice calls
1. In the standby mode, enter the phone number,
including the area code. To remove a number,
press C.
For international calls, press * twice for the +
character (replaces the international access
code), and enter the country code, area code
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the
first letters of the name to the search field. Matching
contacts are listed. To call, press the call key. If you
have saved several numbers for a contact, select the
desired number from the list.
Cyan Magenta Yellow Black
79
Make calls
Voice and video mailboxes
To call your voice or video mailbox (network
services, video mailbox available only in the UMTS
network), press and hold 1 in the standby mode,
and select Voice mailbox or Video mailbox.
To change the phone number of your voice or video
mailbox, press , and select ToolsUtilities
Call mailbox, a mailbox, and OptionsChange
number. Enter the number (obtained from your
network service provider), and select OK.
Answer or decline a call
To answer the call, press the call key, or open the
slide.
To mute the ringing tone of an incoming call, select
Silence.
If you do not want to answer a call, press the end
key. If you activate the Call divertVoice calls
If busy function in phone settings to divert calls,
declining an incoming call also diverts the call. If you
do not want to answer a call, press the end key. If
you activate the Call divertVoice callsIf
busy function in phone settings to forward calls,
declining an incoming call also forwards the call.
80
When you select Silence to mute the ringing tone
of an incoming call, you can send a text message
without rejecting the call, informing the caller that
you cannot answer the call. Select OptionsSend
text message. To set up this option and write a
standard text message, select ToolsSettings
PhoneCallReject call with SMS.
Make a video call
When you make a video call (network service), you
can see a real-time, two-way video between you
and the recipient of the call. The live video image,
or video image captured by the camera in your
device is shown to the video call recipient.
To be able to make a video call, you must have a
USIM card and be in the coverage of a UMTS network.
For availability of and subscription to video call
services, contact your network service provider.
A video call can only be made between two parties.
The video call can be made to a compatible mobile
device or an ISDN client. Video calls cannot be made
while another voice, video, or data call is active.
Icons
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your
device. To send a still image instead, select Tools
SettingsPhoneCallImage in video
call.
Cyan Magenta Yellow Black
To answer the video call, press the call key. Allow
video image to be sent to caller? is displayed. To
start sending live video image, select Yes.
1. To start a video call, enter the phone number in
the standby mode, or select Contacts and a
contact.
If you do not activate the video call, video sending
is not activated, and you only hear the sound of the
caller. A grey screen replaces the video image. To
replace the grey screen with a still image captured
by the camera in your device, select Tools
SettingsPhoneCallImage in video
call.
2. Select OptionsCallVideo call.
The secondary camera on the front is used by
default for video calls. Starting a video call may
take a while. Waiting for video image is
shown. If the call is not successful (for example,
video calls are not supported by the network, or
the receiving device is not compatible), you are
asked if you want to try a normal call or send a
text or multimedia message instead.
The video call is active when you see two video
images, and hear the sound through the
loudspeaker. The call recipient may deny video
sending ( ), in which case you only hear the
sound and may see a still image or a grey
background graphic.
3. To end the video call, press the end key.
Answer or decline a video
call
When a video call arrives,
is displayed.
Make calls
Even if you denied video sending during a video call,
the call is still charged as a video call. Check the
pricing with your service provider.
To end the video call, press the end key.
Internet calls
With the internet call service (network service), you
can make and receive calls over the internet.
Internet calls can be established between
computers, between mobile phones, and between
a VoIP device and a traditional telephone. To make
or receive an internet call, your device must be
connected to an internet call service.
To connect to an internet call service, your device
must be in the coverage of a connection network,
such as a WLAN access point.
Your device supports voice calls over the internet
(net calls). Your device attempts emergency calls
primarily over cellular networks. If an emergency
call using cellular networks is not successful, your
Cyan Magenta Yellow Black
81
Make calls
device attempts an emergency call through your net
call provider. Due to the established nature of
cellular telephony, you should use cellular networks
for emergency calls, if possible. If you have cellular
network coverage available, make sure that your
cellular phone is switched on and ready to make
calls before you attempt an emergency call. The
capability for an emergency call using internet
telephony depends on the availability of a WLAN
network and your net call provider's
implementation of emergency call capabilities.
Contact your net call provider to check the internet
telephony emergency call capability.
Create an internet call profile
Before you can make internet calls, you must create
an internet call profile.
1. Press , select ToolsSettings
ConnectionSIP settingsOptionsNew
SIP profile, and enter the required information.
Ensure that Registration is set to Always on.
Contact your internet call provider for the correct
settings.
2. Select Proxy serverTransport type
Auto.
3. Select Back until you return to the main view of
connection settings.
4. Select Internet tel.OptionsNew
profile. Enter a name for the profile, and select
the SIP profile you just created.
To use the created profile for connecting to the
internet call service automatically, press , and
select ToolsConnectivityInternet tel.
Preferred profile.
To log in to the internet call service manually, select
RegistrationWhen needed, and Transport
typeUDP or TCP in the SIP settings when
creating an internet call profile.
Connect to the internet call
service
To make or receive an internet call, your device must
be connected to an internet call service. If you have
selected automatic login, your device automatically
connects to the internet call service. If you log in to
the service manually, select an available network
from the list and Select.
When you are connected to an internet call service,
is shown in the standby mode.
The list of networks is refreshed automatically every
15 seconds. To refresh the list manually, select
OptionsRefresh. Use this option if your WLAN
access point is not shown.
82
Cyan Magenta Yellow Black
few seconds to clear the display and to switch the
device from the number mode to the letter mode.
Enter the address, and press the call key.
To configure new services, select Options
Configure service. This option is shown only if
there are services that have not been configured.
To make an internet call from Contacts, press ,
select Contacts, scroll to the desired contact, and
select OptionsInternet call.
To save the network to which you are currently
connected, select OptionsSave network. The
saved networks are marked with a star in the list of
networks.
To make an internet call from the log, press ,
select ToolsLog and the log type, scroll to the
desired contact, and select OptionsInternet
call.
To connect to an internet call service using a hidden
WLAN, select OptionsUse hidden network.
Service settings
To end the connection to an internet call service,
select OptionsDisconnect from serv..
Press , select ToolsConnectivityInternet
tel.OptionsSettings, and select the default
settings or service-specific settings.
Make internet calls
To set internet call as the preferred call type for all
outgoing calls, select Default call typeInternet
call. When your device is connected to an internet
call service, all calls are made as internet calls.
When you have activated the internet call feature,
you can make an internet call from all applications
where you can make a regular voice call. For
example, in Contacts, scroll to the desired contact,
and select CallOptionsInternet call.
To make an internet call in the standby mode, enter
the phone number or internet address, and press
the call key.
To make an internet call to an address that does not
start with a digit, press any number key when the
device is in the standby mode, then press # for a
Make calls
To select an internet call service for outgoing calls
if the device is connected to more than one service,
select OptionsChange service.
To log in automatically to the internet call service,
select Login typeAutomatic. If you use the
automatic login type for WLANs, the device
periodically scans for WLANs, which increases the
demand on battery power and reduces the battery
life.
To log in manually to the internet call service, select
Login typeManual.
Cyan Magenta Yellow Black
83
Make calls
To view the networks you have saved for the
internet call service and the networks detected by
the internet call service, select Saved conn.
networks.
To define the service-specific settings, select Edit
service settings. This option is only available if a
service-specific software plug-in has been installed
in the device.
Log
device registers missed and received calls only if the
network supports these functions, the device is
switched on, and within the network service area.
To clear all recent call lists, select OptionsClear
recent calls in the recent calls main view. To clear
one of the call registers, open the register you want
to erase, and select OptionsClear list. To clear
an individual event, open a register, scroll to the
event, and press C.
Call duration
The log stores information about the
communication history of the device. The device
registers missed and received calls only if the
network supports these functions, the device is
switched on, and within the network service area.
Press
, and select ToolsLog.
To monitor the approximate duration of your
incoming and outgoing calls, select Call duration.
For more information on Log, see the extended user
guide on the product support pages of the Nokia
website.
Note: The actual time invoiced for calls by
your service provider may vary, depending on
network features, rounding off for billing, and so
forth.
Recent calls
To clear call duration timers, select Options
Clear timers. For this you need the lock code.
Press
, and select ToolsLog.
To monitor the phone numbers of missed, received,
and dialled voice calls, select Recent calls. The
84
Cyan Magenta Yellow Black
In Contacts, you can save and update contact
information, such as phone numbers, home
addresses, or e-mail addresses of your contacts. You
can add a personal ringing tone or a thumbnail
image to a contact card. You can also create contact
groups, which allow you to send text messages or
e-mail to many recipients at the same time.
For more information on Contacts and SIM contacts,
see the extended user guide on the product support
pages of the Nokia website.
Save and edit names and
numbers
1. Press , and select ContactsOptions
New contact.
2. Fill in the fields that you want, and select Done.
To edit contact cards, scroll to the contact card you
want to edit, and select OptionsEdit. You can
also search for the desired contact by entering the
first letters of the name to the search field. A list of
the contacts starting with the letters appear on the
display.
Tip: To add and edit contact cards, you can
also use Nokia Contacts Editor available in
Nokia Nseries PC Suite.
To attach a small thumbnail image to a contact card,
open the contact card, and select OptionsEdit
OptionsAdd thumbnail. The thumbnail image
is shown when the contact calls.
Contacts (phonebook)
Contacts (phonebook)
Add ringing tones for
contacts
Press
, and select Contacts.
To define a ringing tone for a contact or a contact
group, do the following:
1. Press the scroll key to open a contact card or go
to the groups list, and select a contact group.
2. Select OptionsRinging tone. A list of ringing
tones opens.
3. Select the ringing tone you want to use for the
individual contact or the members of the
selected group.
When a contact or group member calls you, the
device plays the chosen ringing tone (if the caller’s
Cyan Magenta Yellow Black
85
Applications folder
telephone number is sent with the call and your
device recognises it).
SIM contactsSIM directory, the names you
want to copy, and OptionsCopy to Contacts.
To remove the ringing tone, select Default tone
from the list of ringing tones.
To copy contacts to your SIM card, in Contacts, select
the names you want to copy and OptionsCopy
to SIM directory, or OptionsCopyTo SIM
directory. Only the contact card fields supported by
your SIM card are copied.
Copy contacts
To copy names and numbers from a SIM card to your
device, press , and select ContactsOptions
Applications folder
details of installed applications, remove
applications, and define installation settings.
Calculator
Press
, and select ApplicationsCalculator.
Note: This calculator has limited accuracy
and is designed for simple calculations.
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract
from the function map. Enter the second number of
the calculation, and select =.
Application manager
86
With Application manager, you can see the software
packages installed in your device. You can view
Press
, and select ApplicationsApp. mgr..
You can install two types of applications and
software to your device:
Ⴠ J2ME applications based on Java technology with
the extension .jad or .jar
Ⴠ Other applications and software suitable for the
Symbian operating system with the
extension .sis or .sisx
Only install software specifically designed for your
device: Nokia N95 8GB. Software providers will
often refer to the official model number of this
product: Nokia N95-2.
Cyan Magenta Yellow Black
Install applications and software
Installation files may be transferred to your device
from a compatible computer, downloaded during
browsing, or sent to you in a multimedia message
as an e-mail attachment or using other connectivity
methods, such as Bluetooth connectivity. You can
use Nokia Application Installer in Nokia Nseries PC
Suite to install an application to your device.
indicates a .sis or .sisx application, a Java
that the application is not fully
application,
that the application is installed in
installed, and
the mass memory.
Important: Only install and use applications
and other software from trusted sources, such as
applications that are Symbian Signed or have
passed the Java VerifiedTM testing.
Before installation, note the following:
Ⴠ To view the application type, version number,
and the supplier or manufacturer of the
application, select OptionsView details.
To display the security certificate details of the
application, in Details:, scroll to Certificates,
and select View details. See "Certificate
management", p. 93.
Ⴠ If you install a file that contains an update or
repair to an existing application, you can only
restore the original application if you have the
original installation file or a full backup copy of
the removed software package. To restore the
original application, remove the application, and
install the application again from the original
installation file or the backup copy.
Applications folder
For application manager settings, see the extended
user guide on the product support pages of the
Nokia website.
The .jar file is required for installing Java
applications. If it is missing, the device may ask
you to download it. If there is no access point
defined for the application, you are asked to
select one. When you are downloading the .jar
file, you may need to enter a user name and
password to access the server. You obtain these
from the supplier or manufacturer of the
application.
To install an application or software, do the
following:
1. To locate an installation file, press , and select
ApplicationsApp. mgr.. Alternatively,
search the memory in File manager, or open a
message in MessagingInbox that contains
an installation file.
2. In Application manager, select Options
Install. In other applications, scroll to the
Cyan Magenta Yellow Black
87
Tools folder
installation file, and select it to start the
installation.
You cannot cancel the installation after you have
started it.
During installation, the device shows
information about the progress of the
installation. If you install an application without
a digital signature or certification, the device
displays a warning. Continue installation only if
you are sure of the origin and contents of the
application.
To start an installed application, locate it in the
menu, and select it. If the application does not have
a default folder defined, it is installed in the
Applications folder in the main menu.
To see which software packages are installed or
removed and when, select OptionsView log.
Important: Your device can only support one
antivirus application. Having more than one
application with antivirus functionality could affect
performance and operation or cause the device to
stop functioning.
After you install applications to mass memory,
installation files (.sis or .sisx) remain in the device
memory. The files may use large amounts of
memory and prevent you from storing other files.
To maintain sufficient memory, use Nokia Nseries
PC Suite to back up installation files to a compatible
PC, then use the file manager to remove the
installation files from the device memory. If the .sis
file is a message attachment, delete the message
from the Messaging inbox.
See "File manager", p. 89.
Remove applications and
software
Press
, and select ApplicationsApp. mgr..
Scroll to a software package, and select Options
Remove. Select Yes to confirm.
If you remove software, you can only reinstall it if
you have the original software package or a full
backup of the removed software package. If you
remove a software package, you may no longer be
able to open documents created with that software.
If another software package depends on the
software package that you removed, the other
software package may stop working. Refer to the
documentation of the installed software package
for details.
88
Cyan Magenta Yellow Black
For information on Voice commands, Device
manager, and synchronisation, see the extended
user guide on the product support pages of the
Nokia website.
or copy the files to a folder, select OptionsMove
to folder or Copy to folder.
File manager
Your device has an 8 GB internal memory providing
high-capacity storage for different kind of files.
Press
, and select ToolsFile mgr..
With File manager, you can browse files and folders
in the device memory or mass memory. When you
open File manager, the device memory view (
opens. Scroll right to open the mass memory view
( ).
To view what types of data you have in the device
and how much memory the different data types
consume, select OptionsMemory details. The
amount of available memory is shown in Free
memory.
To find a file, select OptionsFind and the
memory from which to search. Enter a search text
that matches the file name.
while you
To mark several files, press and hold
press the scroll key, or scroll up or down. To move
Settings
Tools folder
Mass memory tool
To monitor the amount of used and free space in
the device mass memory, press , and select
ToolsUtilitiesMemory. To see how much
memory the different applications and data types
use, select OptionsMemory details.
To change the name of the mass memory, select
OptionsMass memory name.
To back up information from the device memory to
the mass memory, select OptionsBack up
phone memory.
To restore information from the mass memory to
the device memory, select OptionsRest. from
mass mem..
For information on formatting mass memory, see
the extended user guide on the product support
pages of the Nokia website.
Cyan Magenta Yellow Black
89
Settings
Settings
Some settings may be preset for the device by your
service provider, and you may not be able to change
them.
For information on application settings, see the
extended user guide on the product support pages
of the Nokia website.
General settings
In general settings, you can edit the general
settings of your device or restore the device to
original default settings.
You can adjust time and date settings also in the
clock. See "Clock ", p. 68.
Personalisation settings
Press , and select ToolsSettings
GeneralPersonalisation.
You can edit settings related to the display, standby
mode, and general functions of your device.
Themes allows you to change the look of the
display. See "Themes", p. 66.
90
Voice comms. opens the settings for the Voice
commands application.
Tones allows you to change the tones of the
calendar, clock, and currently active profile.
Display
Ⴠ Light sensor — Scroll left or right to adjust the
light sensor that observes the lighting conditions
and adjusts the brightness of the display. The
light sensor may cause the display to flicker in
low light.
Ⴠ Font size — Adjust the size of the text and icons
on the display.
Ⴠ Power saver time-out — Select the time-out
period after which the power saver is activated.
Ⴠ Welcome note / logo — The welcome note or
logo is displayed briefly each time you switch on
the device.
Ⴠ Light time-out — Select a time-out after which
the backlight of the display is switched off.
Ⴠ Rotate screen — Change the setting for
automatic display rotation. In most applications,
the display rotates automatically between
portrait and landscape modes based on the
orientation of the device. To ensure that the
automatic display rotation works, hold the
Cyan Magenta Yellow Black
Standby mode
Ⴠ Active standby — Activate shortcuts to
applications in the standby mode.
Ⴠ Shortcuts — Assign a shortcut to the selection
keys in the standby mode.
If the active standby is set off, you can also assign
keypad shortcuts for the different presses of the
scroll key.
Ⴠ Active standby apps. — If the active standby is
set on, select the application shortcuts you want
to appear in the active standby.
Ⴠ Operator logo — This setting is only available
if you have received and saved an operator logo.
Select Off if you do not want the logo to be
shown.
Language
Changing the settings for the phone language or
writing language affects every application in your
device, and the change remains effective until you
change these settings again.
Ⴠ Phone language — Change the language of the
display text in your device. This also affects the
format used for date and time and the separators
used, for example, in calculations. Automatic
selects the language according to the
information on your SIM card. After you change
the display text language, the device restarts.
Ⴠ Writing language — Change the writing
language. This affects the characters available
when writing text and the predictive text
dictionary used.
Ⴠ Predictive text — Set predictive text input on
or off for all editors in the device. The predictive
text dictionary is not available for all languages.
Settings
device in an upright position. Automatic rotation
is not functioning, if you change the display
rotation setting manually in an application.
When you exit the application, automatic
rotation is activated again.
Enhancement settings
Press , and select ToolsSettings
GeneralEnhancement.
Some enhancement connectors indicate which type
of enhancement is connected to the device. See
"Display indicators", p. 16.
The available settings depend on the type of
enhancement. Select an enhancement and from the
following:
Ⴠ Default profile — Set the profile that you want
activated each time you connect a certain
compatible enhancement to your device.
Ⴠ Automatic answer — Select whether you want
the device to answer an incoming call
automatically after 5 seconds. If the ringing type
Cyan Magenta Yellow Black
91
Settings
is set to Beep once or Silent, automatic answer
is disabled.
Ⴠ Lights — Set whether lights remain on or are
switched off after the time-out. This setting is not
available for all enhancements.
TV-out settings
To change the settings for a TV-out connection,
select TV-Out and from the following:
Ⴠ Default profile — Set the profile that you want
activated each time you connect a Nokia Video
Connectivity Cable to your device.
Ⴠ TV screen size — Select the aspect ratio of the
TV: Normal or Widescreen for widescreen TVs.
Ⴠ TV system — Select the analogue video signal
system that is compatible with your TV.
Ⴠ Flicker filter — To improve image quality on the
screen of your TV, select On. The flicker filter may
not diminish image flicker on all TV screens.
Security settings
For security module settings, see the extended user
guide on the product support pages of the Nokia
website.
Phone and SIM
Press , and select ToolsSettings
GeneralSecurityPhone and SIM card.
92
Ⴠ PIN code request — When active, the code is
requested each time the device is switched on.
Deactivating the PIN code request may not be
allowed by some SIM cards.
Ⴠ PIN code, PIN2 code, and Lock code — You can
change the lock code, PIN code, and PIN2 code.
These codes can only include the numbers from
0 to 9.
If you forget the PIN or the PIN2 code, contact
your service provider. If you forget the lock code,
contact a Nokia Care point or your service
provider.See "Access codes", p. 12.
Avoid using access codes similar to the
emergency numbers to prevent accidental
dialling of the emergency number.
Ⴠ Keypad autolock period — Select whether the
keypad is locked when your device has been idle
for a certain period of time.
Ⴠ Phone autolock period — To avoid
unauthorised use, you can set a time-out after
which the device automatically locks. A locked
device cannot be used until the correct lock code
is entered. To turn off the autolock period, select
None.
Tip: To lock the device manually, press the
power key. A list of commands opens.
Select Lock phone.
Ⴠ Lock keys if slide closed — Select whether the
keypad is locked when you close the 2-way slide.
Cyan Magenta Yellow Black
Certificate management
Press , and select ToolsSettings
GeneralSecurityCertificate management.
Digital certificates do not guarantee safety; they are
used to verify the origin of software.
In the certificate management main view, you can
see a list of authority certificates that are stored in
your device. Scroll right to see a list of personal
certificates, if available.
Digital certificates should be used if you want to
connect to an online bank or another site or remote
server for actions that involve transferring
confidential information. They should also be used
if you want to reduce the risk of viruses or other
malicious software and be sure of the authenticity
of software when downloading and installing
software.
Important: Even if the use of certificates
makes the risks involved in remote connections and
software installation considerably smaller, they
must be used correctly in order to benefit from
increased security. The existence of a certificate
does not offer any protection by itself; the
certificate manager must contain correct,
authentic, or trusted certificates for increased
security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or
"Certificate not valid yet" is shown even if the
certificate should be valid, check that the current
date and time in your device are correct.
Settings
Tip: To lock or unlock the keypad manually
when the slide is closed, press the left
selection key, then the right selection key.
Ⴠ Lock if SIM card changed — You can set the
device to ask for the lock code when an unknown
SIM card is inserted into your device. The device
maintains a list of SIM cards that are recognised
as the owner’s cards.
Ⴠ Closed user group — You can specify a group of
people to whom you can call and who can call
you (network service).
Ⴠ Confirm SIM services — You can set the device
to display confirmation messages when you are
using a SIM card service (network service).
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to
the listed owner.
For more information, see the extended user guide
on the product support pages of the Nokia website.
Restore original settings
Press , and select ToolsSettings
GeneralFactory settings.
You can reset some of the settings to their original
values. To do this, you need the lock code.
Cyan Magenta Yellow Black
93
Settings
After resetting, the device may take a longer time
to power on. Documents and files are unaffected.
Positioning settings
Press , and select ToolsSettings
GeneralPositioning.
Positioning methods
Ⴠ Integrated GPS — Use the integrated GPS
receiver of your device.
Ⴠ Assisted GPS — Use Assisted GPS (A-GPS).
Ⴠ Bluetooth GPS — Use a compatible external GPS
receiver with Bluetooth connectivity.
Ⴠ Network based — Use information from the
cellular network (network service).
Positioning server
To define an access point, and positioning server for
A-GPS, select Positioning server. The positioning
server may be preset by your service provider, and
you may not be able to edit the settings.
Phone settings
In phone settings, you can edit settings related to
phone calls and network.
94
For information on call barring, see the extended
user guide on the product support pages of the
Nokia website.
Call settings
Press
Call.
, and select ToolsSettingsPhone
Ⴠ Send my caller ID — You can set your phone
number to be displayed to (Yes) or hidden from
(No) the person to whom you are calling, or the
value may be set by your service provider when
you make a subscription (Set by network)
(network service).
Ⴠ Call waiting — If you have activated call waiting
(network service), the network notifies you of a
new incoming call while you have a call in
progress. Set the function on (Activate) or off
(Cancel), or check whether the function is
activated (Check status).
Ⴠ Internet call waiting — Select Activated to be
notified of a new incoming internet call while
you have a call in progress.
Ⴠ Internet call alert — Select On to be alerted for
incoming internet calls. If you select Off, you are
not alerted, but a notification about missed calls
appears.
Ⴠ Default call type — To set internet calls as the
default call type when making calls, select
Internet call. If an internet call service is not
available, a regular voice call is started instead.
Ⴠ Reject call with SMS — To send a text message
to a caller informing why you could not answer
the call, select Yes.
Cyan Magenta Yellow Black
Tip: To switch between the phone lines,
press and hold # in the standby mode.
Ⴠ Line change — To prevent line selection
(network service), select Disable if supported by
your SIM card. To change this setting, you need
the PIN2 code.
Settings
Ⴠ Message text — Write a text to be sent in a text
message when you reject a call.
Ⴠ Image in video call — If video is not sent during
a video call, you can select a still image to be
displayed instead.
Ⴠ Automatic redial — Select On, and your device
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
Ⴠ Show call duration — Activate this setting if
you want the length of a call to be displayed
during the call.
Ⴠ Speed dial — Select On, and the numbers
assigned to the number keys (2 to 9) can be
dialled by pressing and holding the key.
Ⴠ Anykey answer — Select On, and you can
answer an incoming call by briefly pressing any
keypad key, except the left and right selection
keys, the power key, and the end key.
Ⴠ Line in use — This setting (network service) is
shown only if the SIM card supports two
subscriber numbers, that is, two phone lines.
Select which phone line you want to use for
making calls and sending text messages. Calls on
both lines can be answered irrespective of the
selected line. If you select Line 2 and have not
subscribed to this network service, you are not
able to make calls. When line 2 is selected, is
shown in the standby mode.
Call divert
Press , and select ToolsSettingsPhone
Call divert.
Call divert allows you to divert your incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
Select which calls you want to divert and the desired
diverting option. Set the option on (Activate) or off
(Cancel), or check whether the option is activated
(Check status).
Several diverting options can be active at the same
is shown in
time. When all calls are diverted,
the standby mode.
Call barring and call diverting cannot be active at
the same time.
Network settings
Press , and select ToolsSettingsPhone
Network.
Cyan Magenta Yellow Black
95
Settings
Your device can automatically switch between the
GSM and UMTS networks. The GSM network is
indicated with in the standby mode. The UMTS
network is indicated with
Ⴠ Network mode — Select which network to use.
If you select Dual mode, the device uses the GSM
or UMTS network automatically, according to the
network parameters and the roaming
agreements between the wireless service
providers. Contact your network service provider
for details and roaming costs. This option is
shown only if supported by the wireless service
provider.
Ⴠ Operator selection — Select Automatic to set
the device to search for and select one of the
available networks, or Manual to manually
select the network from a list. If the connection
to the manually selected network is lost, the
device sounds an error tone and asks you to
reselect a network. The selected network must
have a roaming agreement with your home
cellular network.
96
A roaming agreement is an agreement between
two or more service providers to enable the users
of one service provider to use the services of
other service providers.
Ⴠ Cell info display — Select On to set the device
to indicate when it is used in a cellular network
based on microcellular network (MCN)
technology and to activate cell info reception.
Connection settings
In connection settings, you can edit access points
and other connectivity settings.
You can also edit settings for Bluetooth connectivity
in the Bluetooth connectivity application. See
"Settings", p. 27.
You can also edit settings for data cable connections
in the USB application. See "USB", p. 29.
For more information on connection settings, see
the extended user guide on the product support
pages of the Nokia website.
Access points
Create a new access point
Press , and select ToolsSettings
ConnectionAccess points.
You may receive access point settings in a message
from a service provider. Some or all access points
may be preset for your device by your service
provider, and you may not be able to change, create,
edit, or remove them.
indicates a protected access point.
indicates a packet data access point.
Cyan Magenta Yellow Black
Tip: You can create internet access points in
a wireless LAN with the WLAN wizard.
To create a new access point, select Options
New access point.
To edit the settings of an access point, select
OptionsEdit. Follow the instructions from your
service provider.
Ⴠ Connection name — Enter a descriptive name
for the connection.
Ⴠ Data bearer — Select the data connection type.
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined or with a red
asterisk. Other fields can be left empty, unless you
have been instructed otherwise by your service
provider.
To be able to use a data connection, your service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data access points
Press , and select ToolsSettings
ConnectionAccess pointsOptionsEdit
or New access point.
Follow the instructions from your service provider.
Ⴠ Access point name — You obtain the access
point name from your service provider.
Ⴠ User name — The user name may be needed to
make a data connection, and is usually provided
by the service provider.
Ⴠ Prompt password — If you must enter the
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
Ⴠ Password — A password may be needed to
make a data connection and is usually provided
by the service provider.
Ⴠ Authentication — Select Secure to always send
your password encrypted or Normal to send
your password encrypted when possible.
Ⴠ Homepage — Depending on the access point
you are setting up, enter the web address or the
address of the multimedia messaging centre.
Settings
indicates a WLAN access point.
Select OptionsAdvanced settings to change
the following settings:
Ⴠ Network type — Select the internet protocol
type to transfer data to and from your device. The
other settings depend on the selected network
type.
Ⴠ Phone IP address (for IPV4 only) — Enter the IP
address of your device.
Ⴠ DNS address — Enter the IP addresses of the
primary and secondary DNS servers, if required
Cyan Magenta Yellow Black
97
Settings
by your service provider. Contact your internet
service provider to obtain these addresses.
Ⴠ Proxy server address — Enter the address of
the proxy server.
Ⴠ Proxy port number — Enter the port number
of the proxy server.
WLAN internet access points
Press , and select ToolsSettings
ConnectionAccess pointsOptionsEdit
or New access point.
Follow the instructions from the WLAN service
provider.
98
Ⴠ WLAN network name — Select Enter
manually or Search for networks. If you select
an existing network, WLAN network mode and
WLAN security mode are determined by the
settings of its access point device.
Ⴠ Network status — Define whether the network
name is displayed.
Ⴠ WLAN network mode — Select Ad-hoc to
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same WLAN network
name.
Ⴠ WLAN security mode — Select the encryption
used: WEP, 802.1x (not for ad hoc networks), or
WPA/WPA2. If you select Open network, no
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select WLAN security settings.
For more information, see the extended user guide
on the product support pages of the Nokia website.
Packet data settings
Press , and select ToolsSettings
ConnectionPacket data.
The packet data settings affect all access points
using a packet data connection.
Ⴠ Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet
data network. Starting an active packet data
connection (for example, to send and receive email) is quicker. If there is no packet data
coverage, the device periodically tries to
establish a packet data connection. If you select
When needed, the device uses a packet data
connection only if you start an application or
action that needs it.
Ⴠ Access point — The access point name is needed
to use your device as a packet data modem to a
compatible computer.
Cyan Magenta Yellow Black
To view advanced settings, select Options
Advanced settings. Changing wireless LAN
advanced settings is not recommended.
Wireless LAN settings
Internet call settings
Press , and select ToolsSettings
ConnectionWireless LAN.
Press , and select ToolsSettings
ConnectionInternet tel..
Ⴠ Show WLAN availability — Select whether
is displayed in the standby mode when a wireless
LAN is available.
Ⴠ Scan for networks — If you set Show WLAN
availability to Yes, select how often the device
searches for available wireless LANs and updates
the indicator.
To create a new internet call profile, select
OptionsNew profile.
Troubleshooting
Ⴠ High speed packet access — Enable or disable
the use of HSDPA (network service) in UMTS
networks.
To edit an existing profile, select OptionsEdit.
Troubleshooting
Q: What is my password for the lock, PIN, or
PUK codes?
Q: How do I close an application that is not
responding?
A: The default lock code is 12345. If you forget or
lose the lock code, contact a Nokia Care point or your
service provider. If you forget or lose a PIN or PUK
code, or if you have not received such a code,
contact your network service provider. For
information about passwords, contact your access
point provider, for example, a commercial internet
service provider (ISP) or network service provider.
A: Press and hold . To close an application, scroll
to it, and press C . Pressing C does not close Music
player. To close Music player, select it from the list,
and OptionsExit.
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows
are clean.
Cyan Magenta Yellow Black
99
Troubleshooting
Q: Why do missing, discoloured, or bright
dots appear on the screen every time I turn
on my device?
A: This is a characteristic of this type of display.
Some displays may contain pixels or dots that
remain on or off. This is normal, not a fault.
A: Make sure that you have configured the home
network settings, content sharing is turned on in
your device, and the other device is UPnP
compatible.
Q: Why can't my device establish a GPS
connection?
Q: What can I do if my home network
connection stops working?
A: Find more information about GPS, GPS receiver,
satellite signals, and location information in this
user guide. See "Positioning (GPS)", p. 56.
A: Switch off the wireless LAN (WLAN) connection
from your compatible PC and your device, and
switch it on again. If this does not help, restart your
compatible PC and your device. If the connection
still does not work, reconfigure the WLAN settings
in both your compatible PC and device. See
"Wireless LAN", p. 24. See "Connection
settings", p. 96.
Q: Why can’t I find my friend’s device while
using Bluetooth connectivity?
A: Check that both devices are compatible, have
activated Bluetooth connectivity, and are not in
hidden mode. Check also that the distance between
the two devices is not over 10 metres (33 feet) and
that there are no walls or other obstructions
between the devices.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you
can either end the connection using the other
device or by deactivating Bluetooth connectivity.
Press , and select ToolsBluetooth
BluetoothOff.
100
Q: Why can’t the other device see the files
stored on my device in the home network?
Q: Why can't I see my compatible PC in my
device in the home network?
A: If you are using a firewall application in your
compatible PC, check that it allows home media
server to use the external connection (you can add
Home media server to the firewall application's
exceptions list). Check from the firewall settings
that the firewall application allows traffic to the
following ports: 1900, 49152, 49153, and 49154.
Some WLAN access point devices have a built-in
firewall. In such cases, check that the firewall in the
access point device does not block traffic to the
Cyan Magenta Yellow Black
Q: Why can't I see a wireless LAN (WLAN)
access point even though I know I'm within
its range?
A: The WLAN access point may use a hidden service
set identifier (SSID). You can only access networks
that use a hidden SSID if you know the correct SSID,
and have created a WLAN Internet access point for
the network on your Nokia device.
Q: How do I switch wireless LAN (WLAN) off
on my Nokia device?
A: The WLAN on your Nokia device switches off
when you are not trying to connect, not connected
to another access point, or not scanning for
available networks. To further reduce battery
consumption, you can specify that your Nokia
device does not scan, or scans less often, for
available networks in the background. WLAN
switches off in between background scans.
To change the background scan settings:
1. Press , and select ToolsSettings
ConnectionWireless LAN.
2. To increase the background scan time interval,
adjust the time in Scan for networks. To stop
background scans, select Show WLAN
availabilityNever.
3. To save your changes, press Back.
When Scan for networks is set to Never, the
WLAN availability icon is not shown in the
standby mode. However, you can still manually
scan for available WLAN networks, and connect
to WLAN networks as usual.
Q: How can I save my data before deleting it?
Troubleshooting
following ports: 1900, 49152, 49153, and 49154.
Check that the WLAN settings are the same in your
device and compatible PC.
A: To save data, use Nokia Nseries PC Suite to make
a back-up copy of all data to a compatible computer;
send images to your e-mail address, then save the
images to your computer; or send data using
Bluetooth connectivity to a compatible device.
Q: Why can’t I select a contact for my
message?
A: The contact card does not have a phone number,
an address, or an e-mail address. Press , select
Contacts, and edit the contact card.
Q: How can I end the data connection when
the device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To
stop the device from making a data connection,
press , and select MessagingOptions
SettingsMultimedia messageMultimedia
Cyan Magenta Yellow Black
101
Nokia original enhancements
retrieval and Manual to have the multimedia
messaging centre save messages to be retrieved
later, or Off to ignore all incoming multimedia
messages. If you select Manual, you receive a
notification when there is a new multimedia
message that you can retrieve in the multimedia
message centre. If you select Off, the device does
not make any network connections related to
multimedia messaging. To set the device to use a
packet data connection only if you start an
application or action that needs it, press , and
select ToolsSettingsConnectionPacket
dataPacket data connectionWhen
needed. If this does not help, switch the device off,
and switch it on again.
on your compatible PC. For further information on
how to use Nokia Nseries PC Suite, see the help
function on Nokia Nseries PC Suite or visit the Nokia
support pages.
Q: Can I use my device as a fax modem with
a compatible PC?
A: You cannot use your device as a fax modem.
However, with call diverting (network service), you
can divert incoming fax calls to another phone
number.
Q: Why do I have problems connecting the
device to my PC?
A: Ensure that you have the latest version of Nokia
Nseries PC Suite and that it is installed and running
Nokia original enhancements
102
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer.
Cyan Magenta Yellow Black
minutes
(GSM)
Enhancements
Practical rules about accessories and enhancements
Ⴠ Keep all accessories and enhancements out of the
reach of small children.
Ⴠ When you disconnect the power cord of any
accessory or enhancement, grasp and pull the
plug, not the cord.
Ⴠ Check regularly that enhancements installed in a
vehicle are mounted and are operating properly.
Ⴠ Installation of any complex car enhancements
must be made by qualified personnel only.
Up to XX
hours (GSM)
Important: These battery talk and standby
times can only be reached in certain optimised
network conditions or surroundings. The actual
battery talk and standby times may differ
depending on SIM card, features used, battery age
and condition, temperatures to which battery is
exposed, different network conditions, and many
other factors, so that the talk and standby times
may be significantly shorter than given here. In
addition, ringing tones, handsfree, use in digital
mode, and other functions consume the power, and
the amount of time a device is used for calls will
affect its standby time. Likewise, the amount of
time that the device is turned on and in the standby
mode will affect its talk time.
Nokia original enhancements
An extensive range of
enhancements is available for
your device.
Battery
Battery
model
Type
Talk time
Standby
time
BL-6F
Li-Ion
Up to XX
minutes
(WCDMA) /
Up to XX
Up to XX
hours
(WCDMA) /
Cyan Magenta Yellow Black
103
Battery information
Battery information
Charging and discharging
Use the battery only for its intended purpose. Never
use any charger or battery that is damaged.
Your device is powered by a rechargeable battery.
The battery can be charged and discharged
hundreds of times, but it will eventually wear out.
When the talk and standby times are noticeably
shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your
battery only with Nokia approved chargers
designated for this device.
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object such as
a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the
battery. (These look like metal strips on the
battery.) This might happen, for example, when you
carry a spare battery in your pocket or purse. Shortcircuiting the terminals may damage the battery or
the connecting object.
If a replacement battery is being used for the first
time or if the battery has not been used for a
prolonged period, it may be necessary to connect
the charger, then disconnect and reconnect it to
begin charging the battery.
Unplug the charger from the electrical plug and the
device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully
charged battery will lose its charge over time.
104
If the battery is completely discharged, it may take
several minutes before the charging indicator
appears on the display or before any calls can be
made.
Leaving the battery in hot or cold places, such as in
a closed car in summer or winter conditions, will
reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15°C and
25°C (59°F and 77°F). A device with a hot or cold
battery may not work temporarily, even when the
battery is fully charged. Battery performance is
particularly limited in temperatures well below
freezing.
Do not dispose of batteries in a fire as they may
explode. Batteries may also explode if damaged.
Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as
household waste.
Cyan Magenta Yellow Black
Authenticate hologram
Nokia battery
authentication guidelines
1. When you look at the
hologram on the label, you
should see the Nokia
connecting hands symbol
from one angle and the
Nokia Original
Enhancements logo when
looking from another angle.
Always use original Nokia batteries for your safety.
To check that you are getting an original Nokia
battery, purchase it from an authorised Nokia
dealer, and inspect the hologram label using the
following steps:
2. When you angle the
hologram left, right, down
and up, you should see 1, 2,
3 and 4 dots on each side
respectively.
Successful completion of the steps is not a total
assurance of the authenticity of the battery. If you
have any reason to believe that your battery is not
an authentic, original Nokia battery, you should
refrain from using it, and take it to the nearest
authorised Nokia service point or dealer for
assistance. Your authorised Nokia service point or
dealer will inspect the battery for authenticity. If
authenticity cannot be verified, return the battery
to the place of purchase.
Battery information
Do not dismantle or shred cells or batteries. In the
event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. In the event
of such a leak, flush your skin or eyes immediately
with water, or seek medical help.
What if your battery is not
authentic?
If you cannot confirm that your Nokia battery with
the hologram on the label is an authentic Nokia
battery, please do not use the battery. Take it to the
nearest authorised Nokia service point or dealer for
assistance. The use of a battery that is not approved
by the manufacturer may be dangerous and may
result in poor performance and damage to your
device and its enhancements. It may also invalidate
any approval or warranty applying to the device.
Cyan Magenta Yellow Black
105
Care and maintenance
To find out more about original Nokia batteries,
visit www.nokia.com/battery.
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
Ⴠ Do not attempt to open the device other than as
instructed in this guide.
Ⴠ Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and
fine mechanics.
Ⴠ Keep the device dry. Precipitation, humidity, and
all types of liquids or moisture can contain
minerals that will corrode electronic circuits. If
your device does get wet, remove the battery,
and allow the device to dry completely before
replacing it.
Ⴠ Do not paint the device. Paint can clog the
moving parts and prevent proper operation.
Ⴠ Do not use or store the device in dusty, dirty
areas. Its moving parts and electronic
components can be damaged.
Ⴠ Use a soft, clean, dry cloth to clean any lenses,
such as camera, proximity sensor, and light
sensor lenses.
Ⴠ Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Ⴠ Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
device and may violate regulations governing
radio devices.
Ⴠ Do not store the device in cold areas. When the
device returns to its normal temperature,
moisture can form inside the device and damage
electronic circuit boards.
Ⴠ Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
Ⴠ Use chargers indoors.
Ⴠ Always create a backup of data you want to keep,
such as contacts and calendar notes.
106
Cyan Magenta Yellow Black
accumulators must be taken to separate collection
at the end of their working life. Do not dispose of
these products as unsorted municipal waste.
These suggestions apply equally to your device,
battery, charger, or any enhancement. If any device
is not working properly, take it to the nearest
authorized service facility for service.
Return the products to collection to prevent
possible harm to the environment or human health
from uncontrolled waste disposal and to promote
the sustainable reuse of material resources.
Collection information is available from the product
retailer, local waste authorities, national producer
responsibility organizations, or your local Nokia
representative. For more information, see product
Eco-Declaration or country-specific information at
www.nokia.com.
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union all electrical and
electronic products, batteries, and
Additional safety information
Small children
Your device and its enhancements may contain
small parts. Keep them out of the reach of small
children.
Operating environment
This device meets RF exposure guidelines when
used either in the normal use position against the
ear or when positioned at least 1.5 centimeters (5/8
Additional safety information
Ⴠ To reset the device from time to time for
optimum performance, power off the device and
remove the battery.
inch) away from the body. When a carry case, belt
clip, or holder is used for body-worn operation, it
should not contain metal and should position the
device the above-stated distance from your body.
To transmit data files or messages, this device
requires a quality connection to the network. In
some cases, transmission of data files or messages
may be delayed until such a connection is available.
Ensure the above separation distance instructions
are followed until the transmission is completed.
Cyan Magenta Yellow Black
107
Additional safety information
Parts of the device are magnetic. Metallic materials
may be attracted to the device. Do not place credit
cards or other magnetic storage media near the
device, because information stored on them may be
erased.
Medical devices
Operation of any radio transmitting equipment,
including wireless phones, may interfere with the
functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of
the medical device to determine if they are
adequately shielded from external RF energy or if
you have any questions. Switch off your device in
health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Implanted medical devices
108
Manufacturers of medical devices recommend that
a minimum separation of 15.3 centimeters (6
inches) should be maintained between a wireless
device and an implanted medical device, such as a
pacemaker or implanted cardioverter defibrillator,
to avoid potential interference with the medical
device. Persons who have such devices should:
Ⴠ Always keep the wireless device more than 15.3
centimeters (6 inches) from the medical device
when the wireless device is turned on.
Ⴠ Not carry the wireless device in a breast pocket.
Ⴠ Hold the wireless device to the ear opposite the
medical device to minimize the potential for
interference.
Ⴠ Turn the wireless device off immediately if there
is any reason to suspect that interference is
taking place.
Ⴠ Read and follow the directions from the
manufacturer of their implanted medical device.
If you have any questions about using your wireless
device with an implanted medical device, consult
your health care provider.
Hearing aids
Some digital wireless devices may interfere with
some hearing aids. If interference occurs, consult
your service provider.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems,
electronic speed control systems, and air bag
Cyan Magenta Yellow Black
Potentially explosive
environments
Only qualified personnel should service the device
or install the device in a vehicle. Faulty installation
or service may be dangerous and may invalidate any
warranty that may apply to the device. Check
regularly that all wireless device equipment in your
vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive
materials in the same compartment as the device,
its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with
great force. Do not place objects, including installed
or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed
and the air bag inflates, serious injury could result.
Switch off your device when in any area with a
potentially explosive atmosphere, and obey all
signs and instructions. Potentially explosive
atmospheres include areas where you would
normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Switch off
the device at refuelling points such as near gas
pumps at service stations. Observe restrictions on
the use of radio equipment in fuel depots, storage,
and distribution areas; chemical plants; or where
blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on
boats, chemical transfer or storage facilities and
areas where the air contains chemicals or particles
such as grain, dust, or metal powders. You should
check with the manufacturers of vehicles using
liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely
used in their vicinity.
Using your device while flying in aircraft is
prohibited. Switch off your device before boarding
an aircraft. The use of wireless teledevices in an
aircraft may be dangerous to the operation of the
aircraft, disrupt the wireless telephone network,
and may be illegal.
Additional safety information
systems. For more information, check with the
manufacturer, or its representative, of your vehicle
or any equipment that has been added.
109
Cyan Magenta Yellow Black
Additional safety information
an emergency call. Consult this guide or your service
provider for more information.
Emergency calls
Important: Wireless phones, including this
device, operate using radio signals, wireless
networks, landline networks, and userprogrammed functions. Because of this,
connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device
for essential communications like medical
emergencies.
To make an emergency call:
Certification information
(SAR)
1. If the device is not on, switch it on. Check for
adequate signal strength.
This mobile device meets guidelines for
exposure to radio waves.
Some networks may require that a valid SIM card
is properly inserted in the device.
2. Press the end key as many times as needed to
clear the display and ready the device for calls.
3. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4. Press the call key.
110
When making an emergency call, give all the
necessary information as accurately as possible.
Your wireless device may be the only means of
communication at the scene of an accident. Do not
end the call until given permission to do so.
If certain features are in use, you may first need to
turn those features off before you can make an
emergency call. If the device is in the offline or flight
profile mode, you may need to change the profile
to activate the phone function before you can make
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for
exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile devices employ
a unit of measurement known as the Specific
Absorption Rate or SAR. The SAR limit stated in the
ICNIRP guidelines is 2.0 watts/kilogram (W/kg)
averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with
the device transmitting at its highest certified
Cyan Magenta Yellow Black
Use of device accessories and enhancements may
result in different SAR values. SAR values may vary
depending on national reporting and testing
requirements and the network band. Additional SAR
information may be provided under product
information at www.nokia.com.
Your mobile device is also designed to meet the
requirements for exposure to radio waves
established by the Federal Communications
Commission (USA) and Industry Canada. These
requirements set a SAR limit of 1.6 W/kg averaged
over one gram of tissue. The highest SAR value
reported under this standard during product
certification for use at the ear is 0.29 W/kg and
when properly worn on the body is 0.6 4 W/kg.
Information about this device model can be found
at www.fcc.gov/oet/fccid by searching the
equipment authorization system using FCC ID:
PDNRM-321.
Additional safety information
power level in all tested frequency bands. The actual
SAR level of an operating device can be below the
maximum value because the device is designed to
use only the power required to reach the network.
That amount changes depending on a number of
factors such as how close you are to a network base
station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.40 W/
kg.
111
Cyan Magenta Yellow Black
Index
Index
access codes 12
access points 25, 96
accessories
See enhancements
activation keys 41
active standby mode 67, 91
active toolbar
in camera 44
in gallery 53
address book
See contacts
alarm clock 68
alarm, calendar note 69
albums, media 54
anniversary notes 69
answering calls 80
application manager 86
applications 86
attachments 73, 74
audio messages 70
auto-update for time/
date 68
112
backlight time-out 90
battery
power saver setting 90
saving power 13
birthday notes 69
blogs 22
Bluetooth connectivity
device address 28
device visibility 27
pairing devices 28
receiving data 29
security 27
sending data 28
settings 27
switching on/off 27
brightness, display 90
browser
browsing pages 21
security 23
widgets 22
cable connection 29
calculator 86
calendar 68
calls 79
answering 80
duration of 84
internet calls 83
rejecting 80
settings 94
camera
colour 50
flash 47
image quality 49
imaging mode 45
lighting 50
settings 49
video mode 48
video quality 51
certificates 93
clock 67, 68
computer connections 30
See also data connections
connection manager 26
contact information 11
contacts
copying 86
editing 85
images in 85
ringing tones 85
saving 85
copyright protection 41
customer service 11
Cyan Magenta Yellow Black
H
data connections
cable 29
PC connectivity 30
date and time 68
declining calls 80
dialled numbers 84
dismissing calls 80
display settings 90
DRM (digital rights
management) 41
duration of calls 84
help application 11
HSDPA (high-speed downlink
packet access) 20
language settings 91
light settings 90
list view of menus 67
location information 56
lock code 12
locking
keypad 92
locking keypad 18
loudspeaker 17
e-mail messages 73
enhancements settings 91
factory settings,
restoring 93
feeds, news 22
FM radio 38
font settings 90
gallery 52
general information 11
GPS (Global Positioning
System) 56
grid view of menus 67
IAPs (internet access
points) 25
images
sharing online 56
inbox, message 72
indicators and icons 16
installation of
applications 87
internet calls 81, 83
connecting 82
making 83
profiles 82, 99
settings 99
internet connection 20
See also browser
J2ME Java application
support 86
Java scripts/applications 86
keyguard 18, 92
keypad 18, 92
Index
mailbox
e-mail 73
video 80
voice 80
main menu 67
Maps 59
media
music player 33
radio 38
RealPlayer 41
streaming 41
meeting notes 69
meetings, setting up 69
memo notes 69
messages
e-mail 73
folders for 70
icon for incoming 72
Cyan Magenta Yellow Black
113
Index
multimedia 73
settings 75
voice 80
MMS (multimedia message
service) 70, 73
multimedia menu 19
multimedia messages 70, 73
music player 33
muting sound 80
my numbers 85
navigation tools 56
network settings 95
news feeds 22
Nokia contact
information 11
Nokia original
enhancements 102
offline mode 18
operator logo 91
outbox, message 70
114
packet data connection
access point settings 97
settings 98
personal certificates 93
personalisation 66, 90
phonebook
See contacts
photographs
See camera
PIN code 12
PIN2 code 12
positioning information 56
positioning settings 94
power saver 90
presentations,
multimedia 73
product support pages 11
profiles
internet call profile 82, 99
offline restrictions 18
proxy settings 98
PUK codes 12
radio 38
RealPlayer 41
recording video clips 48
redial feature 95
rejecting calls 80
remote mailbox 73
ringing tones 66
roaming 95
screen settings 90
security
certificates 93
web browser 23
security code 12
sent messages folder 70
setting wizard 15
settings
access points 96
Bluetooth connectivity 27
call divert 95
calls 94
camera 49
certificates 93
display 90
enhancements 91
internet call 99
language 91
network 95
packet data 98
packet data access
points 97
personalisation 90
positioning 94
shortcuts 91
standby 91
tv-out 92
Video Centre 32
WLAN 99
Cyan Magenta Yellow Black
U
widgets 22
wireless LAN (WLAN) 24
wireless LAN settings 99
world clock 68
Index
toolbar 44, 53
transferring data 15
transferring music 35
troubleshooting 99
TV configuration 92
tv-out mode 55
WLAN internet access
points 98
shortcuts 91
SIM card security 92
slide show 54
SMS (short message
service) 70
software applications 86
software update 12
songs 33
speaker phone 17
standby mode 67, 91
streaming media 41
support 11
Symbian applications 86
zooming
46, 48
unlocking keypad 18, 92
UPIN code 12
UPUK code 12
USB cable connection 29
templates, message 71
text messages
receiving and reading 72
replying to 72
sending 70
settings 75
themes 66
time and date 68
time zone settings 68
time-out for backlight 90
tones
ring settings 66
settings 90
video calls 80, 81
Visual Radio 38
voice calls
See calls
voice over IP 83
voice over IP (VOIP) 81
VoIP 83
volume controls 17
wallpaper 66
web connection 20
web logs 22
week settings, calendar 69
welcome 15
welcome note 90
Cyan Magenta Yellow Black
115

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:01:24 14:54:05+02:00
Modify Date                     : 2008:01:24 14:58:31+02:00
Metadata Date                   : 2008:01:24 14:58:31+02:00
Document ID                     : uuid:D4FCBD6D7BCADC11933B9AD777E37616
Instance ID                     : uuid:9d59b713-9ce0-4b90-a60f-6485b18c5314
Derived From Instance ID        : uuid:539c22a3-2b74-4bfe-9843-1563520e57e7
Derived From Document ID        : uuid:a8428f7d-95bf-42ab-9583-41c582c50e71
Format                          : application/pdf
Creator                         : mode
Title                           : untitled
Page Count                      : 117
Author                          : mode

EXIF Metadata provided by EXIF.tools

Microsoft RM-321 GSM Cellular Phone w/BT User Manual

Microsoft Mobile Oy GSM Cellular Phone w/BT

Manual

FCC ID Filing: PDNRM-321

Navigation menu

Namespaces

Views

Navigation