Microsoft RM-325 GSM850/900/1800/1900FDD1/FDD5 Cell Phone w/BT User Manual RM 325 FCC issue1 26 May 08 HD
Microsoft Mobile Oy GSM850/900/1800/1900FDD1/FDD5 Cell Phone w/BT RM 325 FCC issue1 26 May 08 HD
Manual
FCC
RM-325 User Guide
9207322
Issue 1 EN
FCC
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-325 product is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. A copy of the Declaration of
Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/.
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People and Navi are trademarks or registered trademarks of Nokia Corporation.
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein
may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form
without the prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2008. Tegic
Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
Portions of the Nokia Maps software are © 1996-2008 The FreeType Project. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance with the
MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use
in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be
implied for any other use. Additional information, including that related to promotional, internal, and
commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA
OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW,
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may vary by region.
Please check with your Nokia dealer for details, and availability of language options.
0434
FCC
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
The third-party applications provided with your device may have been created and may be owned by
persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or
intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility
for end-user support, functionality of the applications, or the information in the applications or these
materials. Nokia does not provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE
APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER
RIGHTS.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such
interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly
approved by Nokia could void the user's authority to operate this equipment.
9207322/Issue 1 EN
4
FCC
Contents
SAFETY.............................................. 6
General information ........................ 7
Helpful hints ...................................................... 7
About your device............................................. 9
Network services............................................... 9
Enhancements ................................................ 10
Access codes ................................................... 10
Software updates........................................... 11
Phone software updates .............................. 11
My Nokia.......................................................... 12
Download content......................................... 12
Nokia support ................................................. 12
1. Get started.................................. 12
Insert SIM card, memory card and
battery .............................................................. 12
microSD memory card.................................. 13
Charge the battery ........................................ 14
Open and close the phone .......................... 14
Switch the phone on and off ..................... 14
Set the time, zone, and date ...................... 15
Configuration settings service ................... 15
Wrist strap....................................................... 15
Antenna............................................................ 15
Keys and parts ................................................ 16
Sensor ............................................................... 17
Standby mode ................................................ 17
Flight profile.................................................... 18
2. Calls............................................. 19
Make a voice call........................................... 19
Answer and end a voice call....................... 19
Mute and reject a voice call....................... 19
Speed dialling ................................................. 20
Voice dialling .................................................. 20
Options during a call .................................... 20
Make a video call........................................... 21
3. Write text ................................... 22
Traditional text input ................................... 22
Predictive text input ..................................... 22
4. Messaging .................................. 23
Write and send a text message.................. 23
Write and send a multimedia message.... 23
Read and reply to a message...................... 23
Nokia Xpress audio messaging................... 24
Flash messages ............................................... 24
E-mail application ......................................... 24
Instant messaging.......................................... 25
Voice messages............................................... 25
Video messages............................................... 26
Info messages.................................................. 26
Service commands ......................................... 26
Message settings............................................ 26
5. Contacts ..................................... 28
Save names and phone numbers............... 29
Search for a contact...................................... 29
Edit contacts.................................................... 29
Add contact details........................................ 29
Copy or move contacts................................. 29
Groups ............................................................... 30
Business cards................................................. 30
Contact settings ............................................. 30
6. Log .............................................. 30
7. Settings ...................................... 30
Profiles .............................................................. 30
Themes .............................................................. 31
Tones.................................................................. 31
Lights ................................................................. 31
Display............................................................... 31
Date and time ................................................. 32
My shortcuts.................................................... 32
Sync and backup ............................................ 32
Connectivity..................................................... 33
Call ..................................................................... 34
Phone................................................................. 35
Enhancements................................................. 36
Configuration .................................................. 36
Security ............................................................. 36
Restore factory settings ............................... 37
5
FCC
8. Operator menu ........................... 38
9. Gallery......................................... 38
Digital rights management......................... 38
Print images .................................................... 39
10.Media......................................... 39
Camera and video.......................................... 39
Music player.................................................... 40
Radio ................................................................. 41
Voice recorder................................................. 42
Equaliser........................................................... 42
Stereo widening ............................................. 42
11.Organiser................................... 42
Alarm clock...................................................... 42
Calendar ........................................................... 43
To-do list.......................................................... 43
Notes................................................................. 43
Calculator......................................................... 44
Countdown timer........................................... 44
Stopwatch........................................................ 44
12.Applications .............................. 45
Launch a game ............................................... 45
Launch an application.................................. 45
Application options....................................... 45
13.Web............................................ 45
Connect to a service ..................................... 45
Browse pages.................................................. 46
Bookmarks........................................................ 46
Appearance settings...................................... 46
Security settings............................................. 47
Browser security............................................. 47
14.Maps.......................................... 48
Download maps .............................................. 49
Maps and GPS ................................................. 49
Extra services................................................... 50
15.SIM services.............................. 50
16.PC connectivity......................... 51
Nokia PC Suite ................................................ 51
Data communication applications ............ 51
17.Battery and charger
information ..................................... 51
Nokia battery authentication
guidelines ......................................................... 52
Care and maintenance................... 53
Additional safety information ...... 54
APPENDIX....................................... 56
A message from the CTIA............................. 57
Message from the FDA ................................. 60
Index............................................... 64
6
SAFETY
FCC
SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when it
may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
7
General information
FCC
General information
■Helpful hints
Before taking your phone to a Nokia Care point
Q: What can I do to resolve operation issues with my phone?
A: Try the following:
• Switch off the phone, and remove and replace the battery.
• Restore the factory settings. Select Menu > Settings > Rest. factory sett.. To
save all personal data in your phone select Restore settings only.
• Update the phone software with Nokia Software Updater if available. See
www.nokia.com/softwareupdate or your local Nokia website.
Bluetooth connectivity
Q: Why can’t I find a Bluetooth compatible device?
A: Try the following:
• Check that both devices are compatible.
• Check that both devices have activated Bluetooth connectivity.
• Check that the distance between the two devices is not more than 10 metres
(33 feet) and that there are no walls or other obstructions between the
devices.
• Check that the other device is not in the hidden mode.
Calls
Q: How do I mute an incoming call or alarm tone?
A: With the fold closed, double tap the secondary display.
Q: How do I change the volume?
A: To adjust the volume during a call, scroll up or down.
Q: How do I change the ringing tone?
A: Select Menu > Settings > Tones.
Clock
Q: How do I see the time?
A: With the fold closed, double tap the secondary display.
8
General information
FCC
Contacts
Q: How do I add a new contact?
A: Select Menu > Contacts > Add new.
Q: How do I add additional information to a contact?
A: Search for the contact to which you want to add a detail, and select Details >
Options > Add detail and from the available options.
Menus
Q: How can I change the look of the menus?
A: To change the menu view, select Menu > Options > Main menu view > List,
Grid, Grid with labels, or Tab.
Q: How do I personalise my menu?
A: To rearrange the menu, select Menu > Options > Organise. Scroll to the menu
you want to move, and select Move. Scroll to where you want to move the menu,
and select OK. To save the change, select Done > Yes.
Messaging
Q: Why can’t I send a multimedia message?
A: To check availability and to subscribe to the multimedia messaging service
(MMS, network service), contact your service provider.
Q: How do I set up e-mail?
A: To use the e-mail function on your phone, you need a compatible e-mail
system. For the correct settings, contact your e-mail service provider. You may
receive the settings as a configuration message. To activate the e-mail settings,
select Menu > Messaging > Message settings > E-mail messages.
PC connectivity
Q: Why do I have problems connecting the phone to my PC?
A: Ensure that Nokia PC Suite is installed and running on your PC. See the user
guide for Nokia PC Suite. For further information on how to use Nokia PC Suite,
see the help function in Nokia PC Suite or the support pages at www.nokia.com.
Shortcuts
Q: Are there any shortcuts that I can use?
A: There are several shortcuts on your phone:
• To access the call log, press the call key once. To call a number, scroll to the
number or name that you want, and press the call key.
9
General information
FCC
• To open the web browser, press and hold 0.
• To call your voice mailbox, press and hold 1.
• To call your video mailbox, press and hold 2.
• To change from any profile to the silent profile and back to the general profile,
press and hold #.
■About your device
The wireless device described in this guide is approved for use on the WCDMA 850
and 2100 and GSM 850, 900, 1800, and 1900 networks. Contact your service
provider for more information about networks.
When using the features in this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protection may prevent some images, music, and other content from
being copied, modified, or transferred.
Your device may have preinstalled bookmarks and links for third-party internet
sites. You may also access other third-party sites through your device. Third-party
sites are not affiliated with Nokia, and Nokia does not endorse or assume liability
for them. If you choose to access such sites, you should take precautions for
security or content.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
Remember to make back-up copies or keep a written record of all important
information stored in your device.
When connecting to any other device, read its user guide for detailed safety
instructions. Do not connect incompatible products.
■Network services
To use the phone you must have service from a wireless service provider. Many of
the features require special network features. These features are not available on
all networks; other networks may require that you make specific arrangements
with your service provider before you can use the network services. Your service
provider can give you instructions and explain what charges will apply. Some
networks may have limitations that affect how you can use network services. For
instance, some networks may not support all language-dependent characters and
services.
10
General information
FCC
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, these features will not appear on your device menu.
Your device may also have a special configuration such as changes in menu
names, menu order, and icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as the multimedia messaging service
(MMS), browsing, the e-mail application, instant messaging, presence enhanced
contacts, remote synchronisation, and content downloading using the browser or
MMS, require network support for these technologies.
■Enhancements
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
■Access codes
Select Menu > Settings > Security to set how your phone uses the access codes
and security settings.
• Keypad lock (keyguard) prevents accidental keypresses:
1. To lock the keypad, with the fold open, select Menu > * within 3.5 seconds.
2. To unlock the keypad, with the fold open, select Menu > * within 1.5
seconds.
To answer a call when the keypad is locked, press the call key. When you end or
reject the call, the keypad locks automatically.
You can also select Menu > Settings > Phone > Automatic keyguard or
Security keyguard > On or Off. If the security keyguard is on, enter the security
code when requested.
• The security code (5-10 digits) helps you to protect your phone against
unauthorised use. You can create and change the code, and set the phone to
request the code. Keep the code secret and in a safe place separate from your
phone. If you forget the code and your phone is locked, your phone will require
service and additional charges may apply. For more information, contact a
Nokia Care point or your phone dealer.
• The PIN code, supplied with the SIM card, helps to protect the card against
unauthorised use.
11
General information
FCC
• The PIN2 code, supplied with some SIM cards, is required to access certain
services.
• PUK and PUK2 codes may be supplied with the SIM card. If you enter the PIN or
PIN2 code incorrectly three times in succession, you are asked for the PUK or
PUK2 code. If you do not have them, contact your service provider.
• The barring password (4 digits) is required when using the call barring service
to restrict calls to and from your phone (network service).
• To view or change the security module settings, if installed, select Menu >
Settings > Security > Security module sett..
■Software updates
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
Nokia may produce software updates that may offer new features, enhanced functions, or
improved performance. You may be able to request these updates through the Nokia
Software Updater PC application. To update the device software, you need the Nokia
Software Updater application and a compatible PC with Microsoft Windows 2000 or XP
operating system, broadband internet access, and a compatible data cable to connect your
device to the PC.
To get more information and to download the Nokia Software Updater application, visit
www.nokia.com/softwareupdate or your local Nokia web site.
Downloading software updates may involve the transmission of large amounts of data
through your service provider's network. Contact your service provider for information about
data transmission charges.
Make sure that the device battery has enough power, or connect the charger before starting
the update.
If software updates over the air are supported by your network, you may also be able to
request updates through the device. See “Phone,” p. 35.
■Phone software updates
Your service provider may send phone software updates over the air directly to
your device. This option may not be available, depending on your phone.
Warning: If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is completed and the
device is restarted. Be sure to back up data before accepting installation
of an update.
12
Get started
FCC
■My Nokia
Receive free tips, tricks, and support for your Nokia phone, plus free trial content,
interactive demonstrations, a personalised web page, and news about the latest
Nokia products and services.
Get the most out of your Nokia phone and register to My Nokia today! For more
information and availability in your region, see www.nokia.com/mynokia.
■Download content
You may be able to download new content (for example, themes) to your phone
(network service).
For the availability of different services, pricing, and tariffs, contact your service
provider.
■Nokia support
Check www.nokia.com/support or your local Nokia website for the latest guides,
additional information, downloads, and services related to your Nokia product.
The website provides information on the use of Nokia products
and services. If you need to contact Nokia Care services, see the
list of local Nokia Care contact centres at www.nokia.com/
customerservice.
For maintenance services, see your nearest Nokia Care point at
www.nokia.com/repair.
1. Get started
■Insert SIM card, memory card and battery
The SIM card and its contacts can easily be damaged by scratches or bending, so
be careful when handling, inserting, or removing the card.
Insert the SIM card
1. With the back of the phone facing you, remove the battery cover (1).
2. To release the SIM card holder, gently pull the locking clip of the card holder,
and open it (2).
3. Insert the SIM card (3). Make sure that the SIM card is properly inserted and
that the contact area on the card is facing down.
13
Get started
FCC
4. Close the SIM card holder, and press it until it snaps into position (4).
Insert the memory card and the battery
1. To insert the memory card, slide the card holder (1), and swing it open (2).
2. Slide the memory card into the card holder (3).
3. Swing the card holder back in place (4), and close it (5). Make sure the card is
properly inserted and that the contact area on the card is facing down.
4. Observe the battery contacts (6), and insert the battery (7).
5. Replace the battery cover (8-9).
■microSD memory card
You can save data such as ringing tones, themes, tones, images and
video clips on a compatible microSD card. If you replace this card,
these functions and features may not function properly.
You must switch the phone off to remove or replace a microSD card.
Your phone supports microSD cards up to 4 GB.
Use only compatible microSD cards approved by Nokia for use with this device. Nokia uses
approved industry standards for memory cards, but some brands may not be fully compatible
14
Get started
FCC
with this device. Incompatible cards may damage the card and the device and corrupt data
stored on the card.
■Charge the battery
Always switch the device off and disconnect the charger before removing the battery.
Charging the BL-4CT battery with the AC-4 charger takes about 1 hour and 30
minutes while the phone is in the standby mode.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the charger
connector on the side of your phone.
If the battery is completely discharged, it may take
several minutes before the charging indicator appears
on the display or before any calls can be made.
■Open and close the phone
To open the fold, press the
open fold key (1). The fold
swings open (2) to about 161
degrees. Do not try to force
the fold open more.
Close the fold manually.
When the phone is switched
off, or the battery is low,
open the fold manually.
■Switch the phone on and off
1. Press and hold the power key.
2. If the phone asks for a PIN or a UPIN code,
enter the code (displayed as ****), and select
OK.
When you switch on your phone for the first time,
and the phone is in the standby mode, you are
asked to get the configuration settings from your
service provider (network service). Confirm or
decline the query. See “Configuration,” p. 36 and
“Configuration settings service,” p. 15.
15
Get started
FCC
■Set the time, zone, and date
When you switch on your phone for the first time, and the phone is in the standby
mode, you are asked to set the time and date. Fill in the fields, and select Save.
To change the date and time settings later, select Menu > Settings > Date and
time > Date & time settings, Date and time format, or Auto-update of time
(network service) to change the time, time zone, and date settings.
■Configuration settings service
To use some of the network services, such as mobile internet services, MMS, Nokia
Xpress audio messaging, or remote internet server synchronisation, your phone
needs the correct configuration settings. For more information on availability,
contact your network operator, service provider, nearest authorised Nokia dealer,
or see the support area on the Nokia website, www.nokia.com/support.
When you have received the settings as a configuration message, and the settings
are not automatically saved and activated, Configuration settings received is
displayed. Select Show > Save. If required, enter the PIN code supplied by the
service provider.
■Wrist strap
Remove the battery cover of the phone.
Attach the wrist strap. Replace the battery
cover.
■Antenna
Your device may have internal and external antennas. As with any radio
transmitting device, avoid touching the antenna area unnecessarily while
the antenna is transmitting or receiving. Contact with such an antenna
affects the communication quality and may cause the device to operate
at a higher power level than otherwise needed and may reduce the
battery life.
The figure shows the antenna area marked in grey.
16
Get started
FCC
■Keys and parts
1. Front camera
2. Earpiece/Magnet anchor plate
3. Light sensor
4. Display
5. Left selection key
6. Right selection key
7. NaviTM scroll key;
hereafter referred to as scroll key
8. Middle selection key
9. Call key
10.End key/Power key;
ends calls (short key press) and
switches the phone on and off (long key press)
11.Keypad
12.Magnet
13.Loudspeaker
14.USB port
15.Secondary display
16.Wrist strap eyelet
17.2-megapixel camera
18.Camera flash
19.Charger connector
20.Open fold key (electromagnetic opening)
17
Get started
FCC
■Sensor
Select Menu > Settings > Phone > Sensor settings > On to activate the function.
The tap function allows you to quickly mute and reject calls and alarm tones. You
can see the time and indicators for missed calls, and new messages on the
secondary display.
Double-tap
Always double-tap the secondary display with the fold
closed.
Show indicators and time
To display the time, double-tap the secondary, hidden
display. An analogue or digital clock appears, depending
on the selected clock settings. See “Set the time, zone,
and date,” p. 15.
If you have the music player or FM radio open, you must turn them off first. If you
have missed calls or received new messages, you must view them before you see
the time.
Mute and reject
To mute an incoming call or alarm tone, double-tap the secondary display. To
reject the call or snooze the alarm tone, double-tap the display again. Sound is
restored for the next incoming call or alarm tone.
■Standby mode
The phone is in the standby mode when the phone is ready for use, and you have
not entered any characters.
1. 3G indicator
2. Signal strength of the cellular network
3. Battery charge level
4. Indicators. See “Indicators,” p. 18.
5. The name of the network or the operator logo
6. Clock
7. Display
8. Left selection key. By default, this is Go to that takes
you to a list of shortcuts. See “Left and right selection key,” p. 32
18
Get started
FCC
9. The middle selection key mode is Menu.
10.Right selection key. By default this is Names that takes you to your saved
contacts. See “Left and right selection key,” p. 32.
Active standby mode
To enable or disable the active standby mode, select Menu > Settings > Display >
Active standby > Active standby mode.
In the active standby mode, scroll up or down to navigate in the list, and select
Select or View. The arrow indicates that further information is available. To stop
navigation, select Exit.
To organise and change the active standby mode, activate the active standby
mode, and select Options > Personalise view or Active standby sett..
Indicators
. You have unread messages.
. You missed a call. See “Log,” p. 30.
. The keypad is locked. See “Access codes,” p. 10.
. The phone is silent when an incoming call or text message is received. See
“Tones,” p. 31.
. An alarm is active. See “Alarm clock,” p. 42.
, . The packet data connection mode Always online is selected and the
packet data service is available.
, . A GPRS or EGPRS connection is established.
, . The GPRS or EGPRS connection is suspended (on hold).
. Bluetooth connection indicator. See “Bluetooth wireless technology,”
p. 33.
■Flight profile
Use the flight profile in radio sensitive environments—on board aircraft or in
hospitals—to deactivate all radio frequency functions. When the flight profile is
active, is displayed.
Select Menu > Settings > Profiles > Flight > Activate or Personalise.
19
Calls
FCC
To set the phone to ask every time it is switched on whether to use the flight
profile, select Menu > Settings > Phone > Flight query > On.
To deactivate the flight profile, select any other profile.
In the offline or flight profiles, you may need to unlock the device and change to the calling
profile before making a call.
Warning: With the flight profile you cannot make or receive any calls, including
emergency calls, or use other features that require network coverage. To make
calls, you must first activate the phone function by changing profiles. If the device
has been locked, enter the lock code. If you need to make an emergency call while the device
is locked and in the flight profile, you may be also able to enter an official emergency
number programmed in your device in the lock code field and select 'Call'. The device will
confirm that you are about to exit flight profile to start an emergency call.
2. Calls
■Make a voice call
Do one of the following:
• Enter the phone number, including the area code, and press the call key.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), enter the country code, the
area code without the leading 0, if necessary, and the phone number.
• To access the call log, press the call key once, scroll to the number or name that
you want, and press the call key.
• Call a name or number in Contacts. See “Contacts,” p. 28.
To adjust the volume during a call, scroll up or down.
■Answer and end a voice call
To answer a call, press the call key, or open the fold. To end the call, press the end
key, or close the fold.
To activate the fold setting, select Menu > Settings > Call > Answ. if fold
opened > On.
■Mute and reject a voice call
Use the keypad:
• To mute the ringing tone, select Silence. Then answer or reject the call.
20
Calls
FCC
• To reject a call, press the end key.
Use the secondary display:
To activate the tap settings, select Menu > Settings > Phone > Sensor settings.
• To mute a ringing tone, double tap the secondary display. Sound will be
restored for the next incoming call.
• To reject the call, double tap the secondary display again.
■Speed dialling
To assign a number to one of the speed-dialling keys, 3 to 9:
1. Select Menu > Contacts > Speed dials.
2. Scroll to the speed-dialling number that you want.
3. Select Assign, or, if a number has already been assigned to the key, select
Options > Change.
4. Enter the number or select Search and the contact you want to assign.
If speed dialling is deactivated, the phone asks whether you want to activate it.
Select Menu > Settings > Call > Speed dialling > On.
To call a number, press and hold a speed-dialling key until the call begins.
■Voice dialling
Make a phone call by saying the name that is saved Contacts.
As voice commands are language-dependent, before voice dialling, you must
select Menu > Settings > Phone > Voice recognition > Recognition lang., and
your language. Do the Voice recog. training from the instructions on the display.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialling in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone
sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial. If the voice recognition is
successful, a list with matches is shown. The phone plays the voice command
of the first match on the list. If the match is incorrect, scroll to another entry.
■Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
21
Calls
FCC
Possible options that your service provider may offer include conference calls,
video sharing and placing calls on hold.
Call waiting
To be informed that a call is waiting while you are on the phone (network service),
select Menu > Settings > Call > Call waiting > Activate.
To answer a waiting call during an active call, press the call key. The first call is put
on hold. To end the active call, press the end key.
■Make a video call
When you make a video call, you send a real-time video, captured by the camera
on the front of your phone, to the recipient of the call.
To be able to make a video call, you must have a USIM card and be connected in a
WCDMA network. For availability of and subscription to video call services,
contact your network operator or service provider. A video call can only be made
between two parties. The video call can be made to a compatible phone or an
ISDN client. Video calls cannot be made while another voice, video, or data call is
active.
1. To start a video call from the standby mode, enter the phone number, or select
Contacts and a contact.
2. Press and hold the call key, or select Options > Video call.
Starting a video call may take a while. Video call and an outgoing animation is
shown. If the call is not successful (for example, video calls are not supported
by the network, or the receiving device is not compatible) you are asked if you
want to try a normal call or send a message instead.
To adjust the volume during a call, scroll up or down.
3. To end the call, press the end key.
During extended operation such as an active video call and high speed data connection, the
device may feel warm. In most cases, this condition is normal. If you suspect the device is
not working properly, take it to the nearest authorised service facility.
22
Write text
FCC
3. Write text
You can enter text using traditional or predictive text input. Select and hold
Options when you write text, to switch between traditional text input, indicated
by , and predictive text input, indicated by . Not all languages are
supported by predictive text input.
The character cases are indicated by , , and . To change the character
case, press #. To change from the letter to number mode, indicated by , press
and hold #, and select Number mode. To change from the number to the letter
mode, press and hold #.
To set the writing language, select Options > Writing language.
■Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character appears. The
characters available depend on the selected writing language.To create a space,
press 0. To display the most common punctuation marks and special characters,
press 1.
■Predictive text input
Predictive text input is based on a built-in dictionary to which you can add new
words.
1. Start writing a word using the keys 2 to 9. The phone displays * or the letter if it
separately has a meaning as a word. The entered letters are underlined.
2. When you finish writing the word and it is correct, to confirm it, press 0 to add
a space.
If the word is not correct, press * repeatedly, and select the word from the list.
If the ? character is displayed after the word, the word you intended to write is
not in the dictionary. To add the word to the dictionary, select Spell. Enter the
word using traditional text input, and select Save.
To write compound words, enter the first part of the word, and scroll right to
confirm it. Write the last part of the word, and confirm the word.
3. Start writing the next word.
23
Messaging
FCC
4. Messaging
■Write and send a text message
1. Select Menu > Messaging > Create message > Message.
2. Enter one or more phone numbers in the To: field. To retrieve a phone number
from a memory, select Add.
3. Write your message in the Text: field.
To use a text template, scroll down, and select Insert.
4. To send the message, select Send.
■Write and send a multimedia message
1. Select Menu > Messaging > Create message > Message.
2. Enter one or more phone numbers or e-mail addresses in the To: field. To
retrieve a phone number or e-mail address from a memory, select Add.
3. Write your message. To add a file, scroll down, and select Insert.
4. To view the message before sending it, select Options > Preview.
5. To send the message, select Send.
To check availability and to subscribe to the multimedia messaging service (MMS,
network service), contact your service provider.
Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
■Read and reply to a message
1. To view a received message, select Show.
To read the message later, select Menu > Messaging > Inbox.
2. To reply to a message, select Reply. Write the reply message.
3. To send the message, select Send.
Important: Exercise caution when opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
24
Messaging
FCC
■Nokia Xpress audio messaging
You can use the multimedia messaging service (MMS) to create and send an audio
message. MMS must be activated before you can send audio messages.
1. Select Menu > Messaging > Create message > Audio message. The recorder
opens.
2. Speak your message.
3. Enter one or more phone numbers in the To: field, or select Add to retrieve a
number.
4. Select Send, or press the call key.
To open a received audio message, select Play. If more than one message is
received, select View > Play. To listen to the message later, select Exit.
■Flash messages
Select Menu > Messaging > Create message > Flash message. Enter the
recipient’s phone number, and write your message.
Flash messages are text messages that are instantly displayed upon receipt. Flash
messages are not automatically saved.
■E-mail application
To activate the e-mail settings, select Menu > Messaging > Message settings >
E-mail messages.
To use the e-mail function on your phone, you need a compatible e-mail system.
You may receive the e-mail settings as a configuration message. For more
information, contact your network operator or service provider.
E-mail setup wizard
The e-mail setup wizard starts automatically if no e-mail settings are defined in
the phone. To start the setup wizard for an additional account, select Menu >
Messaging and the existing e-mail account. Select Options > Add mailbox to start
the e-mail setup wizard. Follow the instructions on the display.
The e-mail application requires an internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
25
Messaging
FCC
Write and send e-mail
You can either write an e-mail message before connecting to the e-mail service,
or connect to the service first, and then write and send your e-mail.
1. Select Menu > Messaging > Create message > E-mail.
If more than one e-mail account is defined, select the account from which you
want to send the e-mail.
2. Enter the recipient’s e-mail address, the subject, and the e-mail message. To
attach a file, select Options > Insert.
3. To send the e-mail message, select Send.
To send an e-mail from a draft folder, select Menu > Messaging > Drafts, the
desired message, and Send.
Download e-mail
1. To download e-mail message headers, select Menu > Messaging and your
e-mail account.
2. To download an e-mail and its attachments, select the e-mail and Open or
Retrieve.
Read and reply to e-mail
1. Select Menu > Messaging the account name, and the relevant message.
2. To reply to an e-mail, select Options > Reply. Confirm or edit the e-mail
address and subject, and create your reply.
3. To send the message, select Send.
To close the connection to your e-mail account, select Options > Disconnect.
Important: Exercise caution when opening messages. Messages may
contain malicious software or otherwise be harmful to your device or PC.
■Instant messaging
With instant messaging (IM, network service) you can send short, simple text
messages to online users. You must subscribe to a service and register with the IM
service you want to use. For more information about signing up for IM services,
contact your service provider.
■Voice messages
The voice mailbox is a network service, and you may need to subscribe to it. For
more information, contact your service provider.
26
Messaging
FCC
To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to
voice msgs., or press and hold 1. To enter, search for, or edit your voice mailbox
number, select Voice mailbox no..
■Video messages
The video mailbox is a network service, and you may need to subscribe to it. For
more information, contact your service provider.
To call your video mailbox, select Menu > Messaging > Video messages > View
video msgs., or press and hold 2. To enter, search for, or edit your video mailbox
number, select Video mailbox no..
■Info messages
Select Menu > Messaging > Info messages to receive messages on various topics
from your service provider (network service). For more information, contact your
service provider.
■Service commands
Select Menu > Messaging > Serv. commands to write and send service requests
(USSD commands) to your service provider, such as activation commands for
network services.
■Message settings
General settings
General settings are common for text and multimedia messages.
Select Menu > Messaging > Message settings > General settings and from the
following options:
Save sent messages — to set your phone to save the sent messages in the Sent
items folder
Overwrite sent items — to set your phone to overwrite old sent messages with new
ones when the message memory is full. This setting is only shown if you set your
phone to save sent messages.
Favourite recipient — to define easily available message recipients or groups when
sending messages
Font size — to select the font size used in messages
Graphical smileys — to set your phone to replace character-based smileys with
graphical ones
27
Messaging
FCC
Text messages
The text message settings affect the sending, receiving, and viewing of text
messages.
Select Menu > Messaging > Message settings > Text messages and from the
following options:
Delivery reports — request delivery reports about your messages (network service)
Message centres — to set the phone number and name of the message centre that
is required for sending text messages. You receive this number from your service
provider.
Msg. centre in use — to select the message centre in use
Message validity — to select the length of time for which the network attempts to
deliver your message
Messages sent via — to select the format of the messages to be sent: Text, Paging,
or Fax (network service)
Use packet data — to send text messages through a packet data connection, if
available
Character support — to select how characters in the messages to be sent are
shown. To show all characters, select Full. If you select Reduced, characters with
accents and other marks may be converted to other characters.
Rep. via same centre — to allow the recipient of your message to send you a reply
using your message centre (network service)
Multimedia messages
The multimedia message settings affect the sending, receiving, and viewing of
multimedia messages. You may receive the settings as a configuration message.
See “Configuration settings service,” p. 15. You can also enter the settings
manually. See “Configuration,” p. 36.
Select Menu > Messaging > Message settings > Multimedia messages and from
the following options:
Delivery reports — to request delivery reports about your messages (network
service)
MMS creation mode — to restrict or allow various types of multimedia to be added
to messages
Image size in MMS — to set the image size in multimedia messages
28
Contacts
FCC
Default slide timing — to define the default time between slides in multimedia
messages
Allow MMS receptn. — to receive or block multimedia messages. If you select In
home network (default), you can only receive multimedia messages when you are
in your home network. The availability of this menu depends on your phone.
Incoming MMS msgs. — to decide how multimedia messages are retrieved.
Allow adverts — to receive or reject advertisements.
Configuration sett. — select Configuration to view the configurations that support
multimedia messaging. Select a service provider, Default, or Personal config. for
multimedia messaging. Select Account and an MMS account contained in the
active configuration settings.
E-mail messages
The e-mail settings affect the sending, receiving, and viewing of e-mail. You may
receive the settings as a configuration message. See “Configuration settings
service,” p. 15. You can also enter the settings manually. See “Configuration,”
p. 36.
Select Menu > Messaging > Message settings > E-mail messages and from the
following options:
New e-mail notif. — to receive a notification of new e-mail
Allow mail reception — to receive e-mail in a foreign network or only in your home
network
Reply with orig. msg. — to include the original message in the reply
Image size in e-mail — to select the size of images in e-mail
Edit mailboxes — to add new mailboxes or edit the one in use
Service messages
Select Menu > Messaging > Message settings > Service messages to activate
service messages and to set up preferences related to service messages.
5. Contacts
You can save names and phone numbers (contacts) to the phone memory and to
the SIM card memory.
29
Contacts
FCC
The phone memory may save contacts with additional details, such as various
phone numbers and text items. You can also save an image for a limited number of
contacts.
The SIM card memory can save names with one phone number attached to them.
The contacts saved in the SIM card memory are indicated by .
To synchronise your contacts from a PC, see “Connectivity,” p. 33.
■Save names and phone numbers
Select Menu > Contacts > Add new. Names and numbers are saved in the used
memory.
■Search for a contact
Select Menu > Contacts > Names. Scroll through the list of contacts, or enter the
first characters of the name you are searching for.
■Edit contacts
Select Menu > Contacts > Names. Search for the contact that you want to edit,
select Options > Edit, and scroll to the details you want to change.
■Add contact details
Scroll to the contact that you want to add a detail, and select Details > Options >
Add detail, and from the available options.
In the phone memory you can save different types of phone numbers, a tone, an
image or a video clip, and short text items for a contact.
Select Menu > Contacts > Settings, and ensure that the Memory in use is Phone
or Phone and SIM.
■Copy or move contacts
You can move and copy contacts between the phone memory and the SIM card
memory. The SIM card can only save contacts with one phone number.
To move or copy all contacts, select Menu > Contacts > Move contacts or Copy
contacts.
To move or copy individual contacts, select Menu > Contacts > Names. Scroll to
the contact, and select Options > Move contact or Copy contact.
To move or copy multiple contacts, select Menu > Contacts > Names. Scroll to a
contact, and select Options > Mark. Mark the other contacts, and select
Options > Move marked or Copy marked.
30
Log
FCC
■Groups
Select Menu > Contacts > Groups to arrange the names and phone numbers into
caller groups with different ringing tones and group images.
■Business cards
You can send and receive a person’s contact information from a compatible device
that supports the vCard standard as a business card.
To send a business card, search for the contact whose information you want to
send, and select Details > Options > Send business card.
When you receive a business card, to save the business card in the phone memory,
select Show > Save. To discard the business card, select Exit > Yes.
■Contact settings
Select Menu > Contacts > Settings and from the following options:
Memory in use — See “Add contact details,” p. 29.
Contacts view — to select how the names and numbers in contacts are displayed
Name display — to select whether the contact’s first or last name is displayed first
Font size — to set the font size for the contact list
Memory status — to view the amount of free and used memory
6. Log
To view the information on your calls, messages, data, and synchronisation, select
Menu > Log and the desired item.
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
7. Settings
■Profiles
Select Menu > Settings > Profiles, the desired profile, and from the following
options:
Activate — to activate the selected profile
31
Settings
FCC
Personalise — to customise the profile with ringing tones, ringing volume,
vibrating alerts, light effects, and message alert tones.
Timed — to set the profile to be active for a certain time up to 24 hours. After this
time the previous profile becomes active.
■Themes
Select Menu > Settings > Themes and from the following options:
Select theme — to set a theme. Open the Themes folder, and select a theme.
Theme downloads — to open a list of links to download more themes
■Tones
Select Menu > Settings > Tones to change the tone settings of the selected active
profile. You can find the same settings in the profiles menu.
If you select the highest ringing tone level, the ringing tone reaches its highest level after a
few seconds.
■Lights
Select Menu > Settings > Lights > Light effects to turn lights on or off indicating
standby mode, missed events, alarms and reminders, calls, and low battery level.
Light effects settings are profile dependent. Changing light settings effects only
the currently activated profile.
Select Menu > Settings > Lights to activate or deactivate light effects associated
with different phone functions.
■Display
Display settings allow you to personalise your display view.
Standby mode settings
Select Menu > Settings > Display and from the following options:
Wallpaper — to add a background image for the standby modes
Active standby — to use the active standby mode
Standby font colour — to select the font colour for the standby mode
Display brightness — to adjust display brightness
Navigation key icons — to display the icons of the scroll key shortcuts in the
standby mode when the active standby mode is off
Notification details — to display details in missed call and message notifications
32
Settings
FCC
Transition effects — to smooth transitions between views on the display
Fold animation — to display an animation and play a tone when you open and
close the phone
Font size — to set the font size for messaging, contacts, and web pages
Operator logo — to display or hide the operator logo, if available
Cell info display — to receive information from the network operator depending on
the network cell used (network service)
■Date and time
Select Menu > Settings > Date and time > Date & time settings, Date and time
format, or Auto-update of time (network service) to change the clock type, time,
time zone, and date settings.
■My shortcuts
Personal shortcuts gives you quick access to frequently used phone functions.
Left and right selection key
To change the function assigned to the left or right selection key, select Menu >
Settings > My shortcuts > Left selection key or Right selection key and the
function.
In the standby mode, if the left selection key is Go to, to activate a function, select
Go to > Options and from the following options:
Select options — to add or remove a function
Organise — to rearrange the functions
Scroll key
To assign other phone functions from a predefined list to the scroll key, select
Menu > Settings > My shortcuts > Navigation key.
Active standby key
To select how the scroll key activates the active standby mode, select Menu >
Settings > My shortcuts > Active standby key.
■Sync and backup
Select Menu > Settings > Sync and backup and from the following options:
Phone switch — Synchronise or copy selected data between two phones using
Bluetooth technology.
33
Settings
FCC
Create backup — Create a backup of selected data to your memory card or to an
external device.
Restore backup — Select a backup file stored on the memory card or an external
device and restore it to the phone. Select Options > Details for information about
the selected backup file.
Data transfer — Synchronise or copy data between your phone and another
device, PC, or network server (network service).
■Connectivity
You can connect the phone to a compatible device using Bluetooth wireless
technology or a USB data cable.
Bluetooth wireless technology
Bluetooth technology allows you to connect your phone, using radio waves, to a
compatible Bluetooth phone within 10 metres (33 feet).
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the following
profiles: SIM access, object push, file transfer, dial-up networking, headset, hands-free,
service discovery application, generic access, serial port, and generic object exchange. To
ensure interoperability between other devices supporting Bluetooth technology, use Nokia
approved enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
Features using Bluetooth technology increase the demand on battery power and reduce the
battery life.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and take the following steps:
1. Select My phone's name and enter a name for your phone.
2. To activate Bluetooth connectivity, select Bluetooth > On. indicates that
Bluetooth is active.
3. To connect your phone with an audio enhancement, select Connect audio
enhan. and the device that you want to connect to.
4. To pair your phone with any Bluetooth device in range, select Paired devices >
Add new device.
Scroll to a found device, and select Add.
Enter a passcode (up to 16 characters) on your phone and allow the connection
on the other Bluetooth device.
34
Settings
FCC
If you are concerned about security, turn off the Bluetooth function, or set My
phone's visibility to Hidden. Accept Bluetooth communication only from those you
trust.
Packet data
General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an internet protocol (IP)-based network.
You can use your phone as a modem by connecting it to a compatible PC using
Bluetooth technology or a USB data cable. For more information see the Nokia PC
Suite user guide.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data conn., and from the following options:
When needed — to set the packet data connection to establish when required by
an application. The connection will be cut when the application is closed.
Always online — to automatically connect to a packet data network when you
switch the phone on
USB data cable
You can use a USB data cable to transfer data between your phone and a
compatible PC or a printer supporting PictBridge.
To activate the phone for data transfer or image printing, connect the data cable
and select the mode:
Ask on conn. — to set your phone to ask whether to get connected
PC Suite — to use the data cable for Nokia PC Suite
Printing & Media — to use your phone with a PictBridge compatible printer, or to
connect your phone to a compatible PC
Data storage — to connect to a PC that does not have Nokia software and use your
phone for data storage
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable and the desired USB mode.
■Call
Select Menu > Settings > Call and from the following options:
Call divert — to divert your incoming calls (network service). You may not be able
to divert your calls if some call barring functions are active. See Call barring
service in “Access codes,” p. 10.
35
Settings
FCC
Anykey answer — to answer an incoming call by briefly pressing any key, except
the power key, the left and right selection keys, or the end key
Automatic redial — to automatically redial the number if a call fails. The phone
tries to call the number 10 times.
Video-voice redial — to select whether the phone automatically makes a voice call
to the number to which a video call failed
Voice clarity — to enhance speech intelligibility especially in noisy environments
Speed dialling — See “Speed dialling,” p. 20.
Call waiting — See “Call waiting,” p. 21.
Summary after call — to briefly display the approximate duration and cost
(network service) of the call after each call
Send my caller ID — to show your phone number to the person you are calling
(network service). To use the setting agreed upon with your service provider, select
Set by network.
Answ. if fold opened — to answer an incoming call by opening the fold
Video sharing — to share your live camera view with the call recipient during an
ongoing voice call. To check availability and costs, and to subscribe to the service,
contact your network operator or service provider.
■Phone
Select Menu > Settings > Phone and from the following options:
Language settings — to set the display language of your phone, select Phone
language. Automatic selects the language according to the information on the
SIM card. To select the USIM card language, select SIM language. To set a
language for the voice commands, select Recognition lang..
Memory status — to view the amount of used and available phone memory
Automatic keyguard — See “Access codes,” p. 10.
Security keyguard — See “Access codes,” p. 10.
Sensor settings — to adjust the sensor settings on your phone
Voice recognition — See “Voice dialling,” p. 20.
Flight query — See “Flight profile,” p. 18.
Phone updates — to update your phone software if there is an update available
Network mode — to use both the UMTS and the GSM network. You cannot access
this option during an active call.
36
Settings
FCC
Operator selection — to automatically select one of the cellular networks available
in your area. With Manual you can select a network that has a roaming agreement
with your service provider.
Help text activation — to select whether the phone shows help texts
Start-up tone — to select whether the phone sounds a tone when it is switched on
Fold close handling — to select if your phone should return to the standby mode or
keep all applications open when you close the fold
■Enhancements
This menu and its various options are shown only if the phone is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements, an enhancement, and an option
depending on the enhancement.
■Configuration
You can configure your phone with settings that are required for certain services.
Your service provider may also send you these settings as a text message. See
“Configuration settings service,” p.15.
Select Menu > Settings > Configuration and from the following options:
Default config. sett. — to view the service providers saved in the phone and set a
default service provider
Act. def. in all apps. — to activate the default configuration settings for supported
applications
Preferred access pt. — to view the saved access points
Connect to support — to download the configuration settings from your service
provider
Personal config. sett. — to manually add new personal accounts for various
services, and to activate or delete them. The parameters differ according to the
selected service type.
■Security
When security features that restrict calls are in use (such as call barring, closed user group,
and fixed dialling), calls may be possible to the official emergency number programmed into
your device.
Select Menu > Settings > Security and from the following options:
37
Settings
FCC
PIN code request or UPIN code request — to set the phone to ask for your PIN or
UPIN code every time the phone is switched on. Some SIM cards do not allow the
code request to be turned off.
PIN2 code request — to select whether the PIN2 code is required when using a
specific phone feature which is protected by the PIN2 code. Some SIM cards do
not allow the code request to be turned off.
Call barring service — to restrict calls to and from your phone (network service). A
barring password is required.
Fixed dialling — to restrict your outgoing calls to selected phone numbers, if
supported by your SIM card. When fixed dialling is on, GPRS connections are not
possible, except while sending text messages over a GPRS connection. In this case,
the recipient’s phone number and the message centre number must be included in
the fixed dialling list.
Closed user group — to specify a group of people whom you can call and who can
call you (network service)
Security level — Select Phone to request the security code whenever a new SIM
card is inserted into the phone. Select Memory to request the security code when
the SIM card memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or
barring password
Code in use — to select whether the PIN code or UPIN code should be active
Authority certificates or User certificates — to view the list of the authority or user
certificates downloaded into your phone. See “Certificates,” p. 47.
Security module sett. — to view the security module details, activate PIN request
for the security module, or change the module PIN and signing PIN. See also
“Access codes,” p. 10.
■Restore factory settings
To restore the phone’s original factory settings, select Menu > Settings > Rest.
factory sett. and from the following options:
Restore settings only — to reset all preference settings without deleting any
personal data
Restore all — to reset all preference settings and delete all personal data, such as
contacts, messages, media files, and activation keys
38
Operator menu
FCC
8. Operator menu
Access a portal to services provided by your network operator. For more
information, contact your network operator. The operator can update this menu
with a service message.
9. Gallery
Manage images, video clips, music files, themes, graphics, tones, recordings, and
received files. These files are stored in the phone memory or on a memory card,
and may be arranged in folders.
Your phone supports an activation key system to protect acquired content. Always
check the delivery terms of any content and activation key before acquiring them,
as they may be subject to a fee.
To see the list of folders, select Menu > Gallery.
To see the available options of a folder, select a folder and Options.
To view the list of files in a folder, select a folder and Open.
To see the available options of a file, select a file and Options.
■Digital rights management
Content owners may use different types of digital rights management (DRM) technologies
to protect their intellectual property, including copyrights. This device uses various types of
DRM software to access DRM-protected content. With this device you can access content
protected with WMDRM 10, OMA DRM 2.0, OMA DRM 1.0. If certain DRM software fails to
protect the content, content owners may ask that such DRM software's ability to access new
DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-
protected content already in your device. Revocation of such DRM software does not affect
the use of content protected with other types of DRM or the use of non-DRM-protected
content.
Digital rights management (DRM) protected content comes with an associated activation
key that defines your rights to use the content.
If your device has OMA DRM-protected content, to back up both the activation keys and the
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer
the activation keys which need to be restored with the content for you to be able to
continue the use of OMA DRM-protected content after the device memory is formatted. You
may also need to restore the activation keys in case the files on your device get corrupted.
39
Media
FCC
If your device has WMDRM protected content, both the activation keys and the content will
be lost if the device memory is formatted. You may also lose the activation keys and the
content if the files on your device get corrupted. Losing the activation keys or the content
may limit your ability to use the same content on your device again. For more information,
contact your service provider.
■Print images
Your phone supports Nokia XpressPrint to print images that are in JPG format.
1. To connect your phone to a compatible printer, use a data cable or send the
image using Bluetooth connectivity to a printer supporting Bluetooth
technology. See “Connectivity,” p. 33.
2. Select the image you want to print and Options > Print.
10. Media
■Camera and video
Capture images or record video clips with the built-in 2-megapixel camera.
The camera produces images in JPG format and video clips in 3GP format, and you
can digitally zoom up to eight times.
Capture an image
Select Menu > Media > Camera; or, if the video function is on, scroll left or right.
To zoom in or out, scroll left or right.
To capture an image, select Capture. The phone saves the image to your memory
card, if available, or to the phone memory.
To display an image immediately after you take it, select Options > Settings >
Image preview time and the preview time. During the preview time, select Back to
take another image, or Send to send the image as a multimedia message.
Record a video clip
Select Menu > Media > Video; or, if the camera function is on, scroll left or right.
To zoom in or out, scroll left or right.
To start the video recording, select Record. The phone saves the video clips to the
memory card, if available, or to the phone memory.
40
Media
FCC
Camera and video options
To use a filter, select Options > Effects.
To adapt the camera to the light conditions, select Options > White balance.
To change other camera and video settings and to select where images and video
clips are stored, select Options > Settings.
■Music player
Your phone includes a music player for listening to music tracks, recordings or
other MP3, AAC, AAC+, eAAC+, or WMA music files that you have downloaded
from the web or transferred to the phone with Nokia PC Suite. You can also view
your recorded or downloaded video clips.
Music and video files stored in the music folder of the phone memory or on the
memory card are automatically detected and added to the music library.
To open the music player, select Menu > Media > Music player.
To open a list of all songs stored in your phone, select All songs > Open, or scroll
right.
To create or manage playlists, select Playlists > Open, or scroll right.
To open folders with Artists, Albums, or Genres, scroll to the one you want, and
select Expand, or scroll right.
To open a list of video clips stored in your phone, select Videos > Open, or scroll
right.
To customise the music player and equaliser theme, select Menu > Media > Music
player > Go to Music player > Options > Settings > Music player theme.
Music menu
Access the music and video files stored in your phone memory or on the memory
card, download music or video clips from the web, or view compatible video
streams from a network server (network service).
Play music
Warning: Listen to music at a moderate level. Continuous exposure to high
volume may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
When you open the Music player menu, the details of the first track on the default
playlist are shown.
To play, select .
41
Media
FCC
To adjust the volume, scroll up or down.
To pause the playing, select .
To stop the playing, press and hold the end key.
To skip to the next track, select . To skip to the beginning of the previous
track, select .
To rewind the current track, select and hold . To fast forward the current
track, select and hold . Release the key at the position you want.
■Radio
The FM radio depends on an antenna, other than the wireless device antenna, and
a compatible headset needs to be attached to the device for the FM radio to
function properly.
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely loud.
Select Menu > Media > Radio.
To use the graphical keys , , , or on the display, scroll left or right.
Tune-in and save radio stations
1. To start the search, select and hold or . To change the radio frequency in
0.05 MHz steps, briefly press or .
2. To save a station to a memory location, select Options > Save station.
3. Enter the name of the station, and select OK.
Listen to the radio
1. To scroll to the desired radio station, select + or -, or press the headset key.
2. To select a radio station location, briefly press the corresponding number keys.
3. Select Options and from the following:
Stations — to select a saved station from the list. It is only possible to enter the
station list if the selected station is saved.
Search all stations — to search for all radio stations that the phone can receive.
Set frequency — to enter the frequency of a radio station
Settings — to change the Radio Data System (RDS) settings. When RDS is on, you
can select Auto-freq. change on to automatically change to another frequency
containing the same radio station when the original signal becomes weak.
42
Organiser
FCC
■Voice recorder
Record pieces of speech, sound, or an active call, and save them in Gallery.
The recorder cannot be used when a data call or GPRS connection is active.
Select Menu > Media > Voice recorder. To use the graphical keys , , or
on the display, scroll left or right.
Record sound
1. Select , or, during a call, select Options > Record. While recording a call, all
parties to the call hear a faint beeping sound. To pause the recording, select
.
2. To end the recording, select . The recording is saved in Recordings in
Gallery.
Select Options to play or send the last recording, to access the list of recordings,
or to select the memory and the folder to store the recordings.
■Equaliser
Select Menu > Media > Equaliser.
To activate an equaliser set, scroll to one of the sets, and select Activate.
To edit or rename a selected set, select Options > Edit or Rename. Not all sets can
be edited or renamed.
■Stereo widening
Select Menu > Media > Stereo widening to create a wider stereo sound effect
when you are using a stereo headset.
11. Organ iser
■Alarm clock
Select Menu > Organiser > Alarm clock.
To set an alarm, select Alarm time, and enter the alarm time. To change the alarm
time when the alarm time is set, select On.
To set an alarm to repeat on selected days of the week, select Repeat alarm. If you
select the radio as the alarm tone, connect the headset to the phone.
To set a snooze time-out, select the length of time and Save.
43
Organiser
FCC
Stop the alarm
The alarm sounds a tone even if the phone is switched off.
To stop the alarm, select Stop. If you let the alarm sound for a minute or select
Snooze, the alarm stops for the snooze time-out, then resumes.
■Calendar
Select Menu > Organiser > Calendar.
The current day is framed. If there are any notes set for the day, the day is in bold
type. To view the day notes, select View. To view a week, select Options > Week
view. To delete all notes in the calendar, select the month or week view, and select
Options > Delete notes.
To set the date, time, time zone, calendar tone, date or time format, default view,
or the first day of the week, select Settings. To set the phone to delete old notes
automatically after a specified time, select Auto-delete notes.
To synchronise your calendar from a PC, see “Connectivity,” p. 33.
Make a calendar note
Select Menu > Organiser > Calendar. Scroll to the date, and select Options >
Make a note. Select the note type, and fill in the fields.
Note alarm
At the relevant time, the phone displays the note and sounds a tone, if you set one.
If a call note is displayed , to call the number, press the call key. To stop the
alarm and to view the note, select View. If you let the alarm sound for a minute or
select Snooze, the alarm stops for the snooze time-out, then resumes.
To stop the alarm without viewing the note, select Exit.
■To-do list
Select Menu > Organiser > To-do list.
To make a to-do note if no note is added, select Add; otherwise, select Options >
Add. Fill in the fields, and select Save.
To view a note, scroll to it, and select View.
■Notes
Select Menu > Organiser > Notes to write and send notes.
To make a note if no note is added, select Add; otherwise, select Options > Make a
note. Write the note, and select Save.
44
Organiser
FCC
To synchronise your notes from a PC, see “Connectivity,” p. 33.
■Calculator
Select Menu > Organiser > Calculator. When 0 is displayed on the screen, enter
the first number in the calculation. Press # for a decimal point. Scroll to the
desired operation or function. Enter the second number. Repeat this sequence as
many times as it is necessary. To start a new calculation, first select and press
Clear as many times necessary until 0 is displayed.
This calculator has limited accuracy and is designed for simple calculations.
■Countdown timer
1. To activate the countdown timer, select Menu > Organiser > Countd. timer >
Normal timer, enter the alarm time, and write a note that is displayed when
the time expires. To change the countdown time, select Change time.
2. To start the timer, select Start.
3. To stop the timer, select Stop timer.
Interval timer
1. To have an interval timer with up to 10 intervals started, first enter the
intervals.
2. Select Menu > Organiser > Countd. timer > Interval timer.
3. To start the timer, select Start timer > Start.
■Stopwatch
Select Menu > Organiser > Stopwatch and from the following options:
Split timing — to take intermediate times. To reset the time without saving it,
select Stop > Options > Reset.
Lap timing — to take lap times
Continue — to view the timing that you have set in the background
Show last — to view the most recently measured time if the stopwatch is not reset
View times or Delete times — to view or delete the saved times
To set the stopwatch timing in the background, press the end key. Select Continue
to view the timing that you have set in the background.
45
Applications
FCC
12. Applications
■Launch a game
Select Menu > Applications > Games. Scroll to the desired game, and select Open.
■Launch an application
Select Menu > Applications > Collection. Scroll to an application, and select
Open.
■Application options
Update version — to check if a new version of the application is available for
download from the web (network service)
Web page — to receive further information or additional data about the
application from an internet page (network service), if available
Application access — to restrict the application from accessing the network
To set sounds, lights, and shakes for the game, select Menu > Applications >
Options > Application settings.
13. Web
You can access various mobile internet services with your phone browser.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
Check the availability of these services, pricing, tariffs, and instructions with your
service provider.
With the phone browser you can view the services that use wireless markup
language (WML) or extensible hypertext markup language (XHTML) on their
pages. Appearance may vary due to screen size. You may not be able to view all
details of the internet pages.
■Connect to a service
Ensure that the correct configuration settings of the service are activated.
To select the settings for connecting to the service:
1. Select Menu > Web > Web settings > Configuration sett..
46
Web
FCC
2. Select Configuration. Only the configurations that support browsing service
are shown. Select a service provider, Default, or Personal config. for browsing.
You may receive the configuration settings required for browsing as a
configuration message from the service provider that offers the service that
you want to use.
3. Select Account and a browsing service account contained in the active
configuration settings.
4. Select Displ. term. window > Yes to perform manual user authentication for
intranet connections.
Make a connection to the service in one of the following ways:
•Select Menu > Web > Home; or in the standby mode, press and hold 0.
• To select a bookmark of the service, select Menu > Web > Bookmarks.
• To select the last URL, select Menu > Web > Last web addr..
• To enter the address of the service, select Menu > Web > Go to address. Enter
the address of the service, and select OK.
■Browse pages
After you make a connection to the service, you can start browsing its pages. The
function of the phone keys may vary in different services. Follow the text guides
on the display. For more information, contact your service provider.
■Bookmarks
You can save page addresses as bookmarks in the phone memory.
1. While browsing, select Options > Add bookmark; or in the standby mode,
select Menu > Web > Bookmarks.
2. Scroll to a bookmark, and select it, or press the call key to make a connection
to the page associated with the bookmark.
3. Select Options to view, edit, delete, or send the bookmark; to create a new
bookmark; or to save the bookmark to a folder.
■Appearance settings
To personalise the way web pages are displayed on your phone, while browsing,
select Options > Other options > Appearance settings; or in the standby mode,
select Menu > Web > Web settings > Appearance settings.
47
Web
FCC
■Security settings
Cookies and cache
A cookie is data that a site saves in the cache memory of your phone. Cookies are
saved until you clear the cache memory.
While browsing, select Options > Other options > Security > Cookie settings; or in
the standby mode, select Menu > Web > Web settings > Security > Cookies. To
allow or prevent the phone from receiving cookies, select Allow or Reject.
A cache is a memory location that is used to store data temporarily. If you have tried to
access or have accessed confidential information requiring passwords, empty the cache
after each use. The information or services you have accessed are stored in the cache. To
empty the cache, select Options > Other options > Clear the cache; in the standby mode,
select Menu > Web > Clear the cache.
Scripts over secure connection
You can select whether to allow the running of scripts from a secure page. The
phone supports WML scripts.
To allow the scripts, while browsing, select Options > Other options > Security >
WMLScript settings; or in the standby mode, select Menu > Web > Web settings >
Security > WMLscript > Allow.
■Browser security
Security features may be required for some services, such as online banking or
shopping. For such connections you need security certificates and possibly a
security module, which may be available on your SIM card. For more information,
contact your service provider.
Certificates
Important: Even if the use of certificates makes the risks involved in remote
connections and software installation considerably smaller, they must be used
correctly in order to benefit from increased security. The existence of a certificate
does not offer any protection by itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown, even if the
certificate should be valid, check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust the owner
of the certificate and that the certificate really belongs to the listed owner.
There are three kinds of certificates: server certificates, authority certificates, and
user certificates. You may receive these certificates from your service provider.
48
Maps
FCC
Authority certificates and user certificates may also be saved in the security
module by the service provider.
To view the list of the authority or user certificates downloaded to your device,
select Menu > Settings > Security > Authority certificates or User certificates.
is displayed during a connection if the data transmission between the phone
and the content server is encrypted.
The security icon does not indicate that the data transmission between the gateway and the
content server (or the place where the requested resource is stored) is secure. The service
provider secures the data transmission between the gateway and the content server.
Digital signature
You can make digital signatures with your phone if your SIM card has a security
module. Using the digital signature can be the same as signing your name to a
paper bill, contract, or other document.
1. To make a digital signature, select a link on a page, for example, the title of the
book you want to buy and its price. The text to sign, which may include the
amount and date, is shown.
Check that the header text is Read and that the digital signature icon is
shown.
2. To sign the text, read all of the text first, and select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll
through and read all of the text before signing.
3. Select the user certificate you want to use. Enter the signing PIN. The digital
signature icon disappears, and the service may display a confirmation of your
purchase.
14. Maps
You can browse maps for different cities and countries, search for addresses and
points of interest, plan routes from one location to another, save locations as
landmarks, and send them to compatible devices.
Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely
on the cartography that you download for use in this device.
To use the Maps application, select Menu > Maps and the desired item.
49
Maps
FCC
■Download maps
Your phone may contain pre-installed maps on the memory card. You can
download a new set of maps from the internet using Nokia Map Loader PC
software.
Nokia Map Loader
To download the Nokia Map Loader on your PC and for further instructions, see
www.maps.nokia.com.
Before you download new maps for the first time, make sure that you have a
memory card inserted in the phone, and select Menu > Maps to do an initial
configuration.
To change the selection of maps on your memory card, and to ensure that all maps
are from the same release, use the Nokia Map Loader to delete all maps on the
memory card and download a new selection.
Network service
You can set your phone to automatically connect to Nokia Maps server for
assisted address search or route planning, and download maps that you do not
have in your phone when needed. Select Menu > Maps > Settings > Network
settings > Allow network usage.
To prevent automatic download of maps, select No.
Downloading maps may involve the transmission of large amounts of data through your
service provider’s network. Contact your service provider for information about data
transmission charges.
■Maps and GPS
You can use the global positioning system (GPS) with the Maps application to find
out your location, or measure distances and coordinates.
Before you can use the GPS function with your phone, you must pair your phone
with a compatible external GPS receiver using Bluetooth wireless technology. For
more information, see the user guide for your GPS device.
After pairing the Bluetooth GPS device with the phone, it may take several
minutes for the phone to display your current location. Subsequent connections
should be faster, unless the GPS has not been used for several days, or you are very
far away from the last place you used it, it may take several minutes to detect and
display your location.
50
SIM services
FCC
The Global Positioning System (GPS) is operated by the government of the United
States, which is solely responsible for its accuracy and maintenance. The accuracy
of location data can be affected by adjustments to GPS satellites made by the
United States government and is subject to change with the United States
Department of Defense civil GPS policy and the Federal Radio navigation Plan.
Accuracy can also be affected by poor satellite geometry. Availability and quality
of GPS signals may be affected by your location, buildings, natural obstacles, and
weather conditions. The GPS receiver should only be used outdoors to allow
reception of GPS signals.
Any GPS should not be used for precise location measurement, and you should
never rely solely on location data from the GPS receiver and cellular radio
networks for positioning or navigation.
■Extra services
Maps also supports navigation with voice guidance, which requires a regional
licence. To use this service, you need a compatible external GPS device that
supports Bluetooth wireless technology.
To purchase a navigation service with voice guidance, select Menu > Maps >
Extra services > Purchase navigation or Check map updates, and follow the
instructions.
To use navigation with voice guidance, you must allow the Maps application to
use a network connection.
The navigation licence is connected to your SIM card. If you insert another SIM
card in your phone, you are asked to purchase a licence when starting navigation.
During the purchase procedure, you are offered to transfer the existing navigation
licence to the new SIM card without extra charge.
15. SIM services
Your SIM card may provide additional services. You can access this menu only if
supported by your SIM card. The name and contents of the menu depend on the
available services.
For availability and information on using SIM card services, contact your SIM card vendor.
This may be the service provider or other vendor.
Accessing these services may involve sending messages or making a phone call for
which you may be charged.
51
PC connectivity
FCC
16. PC connectivity
You can send and receive e-mail and access the internet when your phone is
connected to a compatible PC through a Bluetooth or a data cable connection.
You can use your phone with a variety of PC connectivity and data
communications applications.
■Nokia PC Suite
With Nokia PC Suite, you can manage your music, synchronise contacts, calendar,
notes, and to-do notes between your phone and a compatible PC or a remote
internet server (network service). You may find more information and PC Suite at
www.nokia.com/support or your local Nokia website.
■Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
For better performance during data calls, place the phone on a stationary surface
with the keypad facing downward. Do not move the phone by holding it in your
hand during a data call.
17. Battery and charger information
Your device is powered by a rechargeable battery. The battery intended for use with this
device is BL-4CT. This device is intended for use when supplied with power from the
following chargers: AC-4. The battery can be charged and discharged hundreds of times, but
it will eventually wear out. When the talk and standby times are noticeably shorter than
normal, replace the battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device. Use of an unapproved battery
or charger may present a risk of fire, explosion, leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a prolonged
period, it may be necessary to connect the charger, then disconnect and reconnect it to
begin charging the battery. If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the display or before any calls can be
made.
Always switch the device off and disconnect the charger before removing the battery.
52
Battery and charger information
FCC
Unplug the charger from the electrical plug and the device when not in use. Do not leave a
fully charged battery connected to a charger, since overcharging may shorten its lifetime. If
left unused, a fully charged battery will lose its charge over time.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold
battery may not work temporarily. Battery performance is particularly limited in
temperatures well below freezing.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic
object such as a coin, clip, or pen causes direct connection of the positive (+) and negative
(-) terminals of the battery. (These look like metal strips on the battery.) This might happen,
for example, when you carry a spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the
event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In
the event of such a leak, flush your skin or eyes immediately with water, or seek medical
help.
Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse
or expose it to water or other liquids.
Improper battery use may result in a fire, explosion, or other hazard. If the device or battery
is dropped, especially on a hard surface, and you believe the battery has been damaged, take
it to a service centre for inspection before continuing to use it.
Use the battery only for its intended purpose. Never use any charger or battery that is
damaged. Keep your battery out of the reach of small children.
■Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting an original
Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label
using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of the battery.
If you have any reason to believe that your battery is not an authentic, original Nokia
battery, you should refrain from using it, and take it to the nearest authorised Nokia service
point or dealer for assistance. Your authorised Nokia service point or dealer will inspect the
battery for authenticity. If authenticity cannot be verified, return the battery to the place of
purchase.
53
Care and maintenance
FCC
Authenticate hologram
1. When you look at the hologram on the label, you should
see the Nokia connecting hands symbol from one angle and
the Nokia Original Enhancements logo when looking from
another angle.
2. When you angle the hologram left, right, down and up, you
should see 1, 2, 3 and 4 dots on each side respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is an authentic
Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service
point or dealer for assistance. The use of a battery that is not approved by the manufacturer
may be dangerous and may result in poor performance and damage to your device and its
enhancements. It may also invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated with
care. The following suggestions will help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, remove
the battery, and allow the device to dry completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
54
Additional safety information
FCC
• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards
and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and
light sensor lenses.
• Use only the supplied or an approved replacement antenna. Unauthorised antennas,
modifications, or attachments could damage the device and may violate regulations
governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as contacts and calendar notes.
• To reset the device from time to time for optimum performance, power off the device
and remove the battery.
These suggestions apply equally to your device, battery, charger, or any enhancement. If any
device is not working properly, take it to the nearest authorised service facility for service.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging
reminds you that all electrical and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their working life. This
requirement applies to the European Union and other locations where separate collection
systems are available. Do not dispose of these products as unsorted municipal waste.
By returning the products to collection you help prevent uncontrolled waste disposal and
promote the reuse of material resources. More detailed information is available from the
product retailer, local waste authorities, national producer responsibility organizations, or
your local Nokia representative. For the product Eco-Declaration or instructions for
returning your obsolete product, go to country-specific information at www.nokia.com.
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.
■Operating environment
This device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 1.0 centimeters (3/8 inch) away from the body.
When a carry case, belt clip, or holder is used for body-worn operation, it should not contain
metal and should position the device the above-stated distance from your body.
55
Additional safety information
FCC
To transmit data files or messages, this device requires a quality connection to the network.
In some cases, transmission of data files or messages may be delayed until such a
connection is available. Ensure the above separation distance instructions are followed until
the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic storage media near the device, because information
stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately shielded from
external RF energy or if you have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of 15.3
centimeters (6 inches) should be maintained between a wireless device and an implanted
medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who have such devices should:
• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical
device when the wireless device is turned on.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical device to minimise the potential
for interference.
• Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
• Read and follow the directions from the manufacturer of their implanted medical device.
If you have any questions about using your wireless device with an implanted medical
device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If interference occurs,
consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in
motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag systems. For more
information, check with the manufacturer, or its representative, of your vehicle or any
equipment that has been added.
56
Additional safety information
FCC
Only qualified personnel should service the device or install the device in a vehicle. Faulty
installation or service may be dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or enhancements. For vehicles equipped
with an air bag, remember that air bags inflate with great force. Do not place objects,
including installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device before
boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere, and obey
all signs and instructions. Potentially explosive atmospheres include areas where you would
normally be advised to turn off your vehicle engine. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling
points such as near gas pumps at service stations. Observe restrictions on the use of radio
equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats, chemical transfer or storage
facilities and areas where the air contains chemicals or particles such as grain, dust, or metal
powders. You should check with the manufacturers of vehicles using liquefied petroleum gas
(such as propane or butane) to determine if this device can be safely used in their vicinity.
■Emergency calls
Important: This device operates using radio signals, wireless networks, landline
networks, and user-programmed functions. If your device supports voice calls
over the internet (internet calls), activate both the internet calls and the cellular
phone. The device will attempt to make emergency calls over both the cellular networks and
through your internet call provider if both are activated. Connections in all conditions
cannot be guaranteed. You should never rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength. Depending on
your device, you may also need to complete the following:
• Insert a SIM card if your device uses one.
• Remove certain call restrictions you have activated in your device.
• Change your profile from offline or flight profile mode to an active profile.
57
APPENDIX
FCC
2. Press the end key as many times as needed to clear the display and ready the device for
calls.
3. Enter the official emergency number for your present location. Emergency numbers vary
by location.
4. Press the call key.
When making an emergency call, give all the necessary information as accurately as
possible. Your wireless device may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits
for exposure to radio waves recommended by international guidelines. These guidelines
were developed by the independent scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known as the
Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using
standard operating positions with the device transmitting at its highest certified power level
in all tested frequency bands. The actual SAR level of an operating device can be below the
maximum value because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how close you are
to a network base station. The highest SAR value under the ICNIRP guidelines for use of the
device at the ear is 0.61 W/kg.
Use of device accessories and enhancements may result in different SAR values. SAR values
may vary depending on national reporting and testing requirements and the network band.
Additional SAR information may be provided under product information at www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to radio waves
established by the Federal Communications Commission (USA) and Industry Canada. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR
value reported under this standard during product certification for use at the ear is 0.63 W/
kg and when properly worn on the body is 0.91 W/kg.
APPENDIX
■A message from the CTIA
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
58
APPENDIX
FCC
Tens of millions of people in the U.S. today take advantage of the unique combination of
convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless
phone gives people the powerful ability to communicate by voice--almost anywhere,
anytime--with the boss, with a client, with the kids, with emergency personnel or even with
the police. Each year, Americans make billions of calls from their wireless phones, and the
numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that every wireless phone
user must uphold. When driving a car, driving is your first responsibility. A wireless phone
can be an invaluable tool, but good judgment must be exercised at all times while driving a
motor vehicle--whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution
and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep
your eyes on the road, check your mirrors frequently and watch out for other drivers. It
requires obeying all traffic signs and signals and staying within the speed limit. It means
using seatbelts and requiring other passengers to do the same.
But with wireless phone use, driving safely means a little more. This brochure is a call to
wireless phone users everywhere to make safety their first priority when behind the wheel of
a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting
us in emergencies and providing opportunities to help others in need.
When it comes to the use of wireless phones, safety is your most important call.
Wireless phone "Safety Tips"
1. Get to know your wireless phone and its features such as speed dial and redial. Carefully
read your instruction manual and learn to take advantage of valuable features most
phones offer, including automatic redial and memory. Also, work to memorize the phone
keypad so you can use the speed dial function without taking your attention off the road.
2. When available, use a hands free device. A number of hands free wireless phone
accessories are readily available today. Whether you choose an installed mounted device
for your wireless phone or a speaker phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make sure you place your wireless phone
within easy reach and where you can grab it without removing your eyes from the road.
If you get an incoming call at an inconvenient time, if possible, let your voice mail
answer it for you.
4. .Suspend conversations during hazardous driving conditions or situations. Let the person
you are speaking with know you are driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but
so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading an address
book or business card, or writing a “to do” list while driving a car, you are not watching
where you are going. It’s common sense. Don’t get caught in a dangerous situation
59
APPENDIX
FCC
because you are reading or writing and not paying attention to the road or nearby
vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or
before pulling into traffic. Try to plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a stop sign, red light or otherwise
stationary. But if you need to dial while driving, follow this simple tip--dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting. Stressful
or emotional conversations and driving do not mix--they are distracting and even
dangerous when you are behind the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend conversations which have the potential
to divert your attention from the road.
8. Use your wireless phone to help others in emergencies. Your wireless phone provides you
a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto
accident, crime in progress or other serious emergency where lives are in danger, call 9-
1-1 or other local emergency number, as you would want others to do for you.
9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools
you can own to protect yourself and your family in dangerous situations--with your
phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency
number in the case of fire, traffic accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
10. Use your wireless phone to help others in emergencies. Your wireless phone provides you
a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto
accident, crime in progress or other serious emergency where lives are in danger, call 9-
1-1 or other local emergency number, as you would want others to do for you.
11. Call roadside assistance or a special wireless non-emergency assistance number when
necessary. Certain situations you encounter while driving may require attention, but are
not urgent enough to merit a call for emergency services. But you still can use your
wireless phone to lend a hand. If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside assistance or other special non-emergency
wireless number.
Careless, distracted individuals and people driving irresponsibly represent a hazard to
everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and
the wireless industry have conducted educational outreach to inform wireless phone users
of their responsibilities as safe drivers and good citizens. As we approach a new century,
more and more of us will take advantage of the benefits of wireless telephones. And, as we
take to the roads, we all have a responsibility to drive safely.
The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.
60
APPENDIX
FCC
For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85
■Message from the FDA
See http://www.fda.gov/cellphones/ for updated information.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated
with using wireless phones. There is no proof, however, that wireless phones are absolutely
safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF when in the stand-by mode. Whereas
high levels of RF can produce health effects (by heating tissue), exposure to low level RF that
does not produce heating effects causes no known adverse health effects. Many studies of
low level RF exposures have not found any biological effects. Some studies have suggested
that some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in reproducing
those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting consumer products
such as wireless phones before they can be sold, as it does with new drugs or medical
devices. However, the agency has authority to take action if wireless phones are shown to
emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA
could require the manufacturers of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged
the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted by
wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that is not
necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information on
possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the federal
level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
61
APPENDIX
FCC
The National Institutes of Health participates in some interagency working group activities,
as well.
FDA shares regulatory responsibilities for wireless phones with the Federal Communications
Commission (FCC). All phones that are sold in the United States must comply with FCC
safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for
safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon. While these
base stations operate at higher power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically thousands of times lower
than those they can get from wireless phones. Base stations are thus not the primary subject
of the safety questions discussed in this document.
What is FDA doing to find out more about the possible health effects of wireless phone
RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators
around the world to ensure that high priority animal studies are conducted to address
important questions about the effects of exposure to radiofrequency energy (RF). FDA has
been a leading participant in the World Health Organization International Electromagnetic
Fields (EMF) Project since its inception in 1996. An influential result of this work has been
the development of a detailed agenda of research needs that has driven the establishment of
new research programs around the world. The Project has also helped develop a series of
public information documents on EMF issues. FDA and the Cellular Telecommunications &
Internet Association (CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government, industry, and academic
organizations. CTIA-funded research is conducted through contracts to independent
investigators. The initial research will include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad assessment of additional research needs in
the context of the latest research developments around the world.
What steps can I take to reduce my exposure to radiofrequency energy from my wireless
phone?
If there is a risk from these products--and at this point we do not know that there is--it is
probably very small. But if you are concerned about avoiding even potential risks, you can
take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time
is a key factor in how much exposure a person receives, reducing the amount of time spent
using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every day, you could place
more distance between your body and the source of the RF, since the exposure level drops
off dramatically with distance. For example, you could use a headset and carry the wireless
phone away from your body or use a wireless phone connected to a remote antenna
62
APPENDIX
FCC
Again, the scientific data do not demonstrate that wireless phones are harmful. But if you
are concerned about the RF exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including
children and teenagers. If you want to take steps to lower exposure to radiofrequency
energy (RF), the measures described above would apply to children and teenagers using
wireless phones. Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure. Some groups sponsored by
other national governments have advised that children be discouraged from using wireless
phones at all. For example, the government in the United Kingdom distributed leaflets
containing such a recommendation in December 2000. They noted that no evidence exists
that using a wireless phone causes brain tumors or other ill effects. Their recommendation
to limit wireless phone use by children was strictly precautionary; it was not based on
scientific evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless phones, there is
no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with
wireless phones for convenience and comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the source of the RF emissions, will not be
placed against the head. On the other hand, if the phone is mounted against the waist or
other part of the body during use, then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless phones, there is
no reason to believe that accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a metallic accessory attached to the
phone. Studies have shown that these products generally do not work as advertised. Unlike
"hand-free" kits, these so-called "shields" may interfere with proper operation of the phone.
The phone may be forced to boost its power to compensate, leading to an increase in RF
absorption. In February 2002, the Federal trade Commission (FTC) charged two companies
that sold devices that claimed to protect wireless phone users from radiation with making
false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
How does FCC Audit Cell Phone RF?
After FCC grants permission for a particular cellular telephone to be marketed, FCC will
occasionally conduct “post-grant” testing to determine whether production versions of the
phone are being produced to conform with FCC regulatory requirements. The manufacturer
63
APPENDIX
FCC
of a cell phone that does not meet FCC’s regulatory requirements may be required to remove
the cell phone from use and to refund the purchase price or provide a replacement phone,
and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk
of injury to the user, FDA may also take regulatory action. The most important post-grant
test, from a consumer’s perspective, is testing of the RF emissions of the phone. FCC
measures the Specific Absorption Rate (SAR) of the phone, following a very rigorous testing
protocol. As is true for nearly any scientific measurement, there is a possibility that the test
measurement may be less than or greater than the actual RF emitted by the phone. This
difference between the RF test measurement and actual RF emission is because test
measurements are limited by instrument accuracy, because test measurement and actual
use environments are different, and other variable factors. This inherent variability is known
as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC
takes into account any measurement uncertainty to determine whether regulatory action is
appropriate. This approach ensures that when FCC takes regulatory action, it will have a
sound, defensible scientific basis.
FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and
agreed it is an acceptable approach, given our current understanding of the risks presented
by cellular phone RF emissions. RF emissions from cellular phones have not been shown to
present a risk of injury to the user when the measured SAR is less than the safety limits set
by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty
permitted by current measurement standards was added to the maximum permissible SAR,
the resulting SAR value would be well below any level known to produce an acute effect.
Consequently, FCC’s approach with measurement uncertainty will not result in consumers
being exposed to any known risk from the RF emitted by cellular telephones.
FDA will continue to monitor studies and literature reports concerning acute effects of cell
phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF
(that is, the risks from using a cell phone for many years). If new information leads FDA to
believe that a change to FCC’s measurement policy may be appropriate, FDA will contact
FCC and both agencies will work together to develop a mutually-acceptable approach.
Updated July 29, 2003
64
FCC
Index
A
access codes 10
active standby mode 18
alarm clock 42
antenna 15
audio messages 24
B
battery 12
Bluetooth 33
browser 46
business cards 30
C
calculator 44
calendar 43
call key 16
call log 30
call register. See call log.
call waiting 21
calls
international 19
making 19
options 20
settings 34
voice dialling 20
camera 39
flash 16
character case 22
charge level 17
codes 10
configurations
general 36
setting service 15
contact information 12
contacts
copying 29
editing 29
groups 30
saving 29
searching 29
settings 30
speed dialling 20
cookies 47
customer service 12
D
data communication 51
digital rights management 38
display 16
double tap 17
downloads 12
E
earpiece 16
e-mail application 24
end key 16
ending calls 19
equaliser 42
F
factory settings 37
flash messages 24
flight mode 18
G
gallery 38
games 45
GPS 48
H
handsfree. See loudspeaker.
I
images 39
indicators 18
info messages 26
instant messaging 25
internet 45
K
keyguard 10
keypad lock 10
keys 16
L
language settings 35
locking the keypad 10
loudspeaker 16, 20
65
FCC
M
maps 48
message settings
e-mail 28
general 26
multimedia messages 27
text messages 27
messages
audio messages 24
flash messages 24
info messages 26
service commands 26
voice messages 25
N
Nokia contact information 12
notes 43
O
operator logo 17, 32
operator menu 38
organiser 42
P
parts 16
PC connectivity 51
PC Suite 51
phone
keys 16
parts 16
power key 14
predictive text input 22
profiles 30
R
radio 41
recorder 42
ringing tones 31
S
safety information 6
scroll key 16
security settings 36
selection keys 16
service commands 26
services 45
settings
call 34
configuration 36
connectivity 33
light 31
messages 26
my shortcuts 32
phone 35
profiles 30
restore factory settings 37
security 36
themes 31
tones 31
shortcuts 32
signal strength 17
SIM services 50
software updates 11
speakerphone. See loudspeaker.
speed dialling 20
standby mode 17, 32
stopwatch 44
switching on and off 14
T
text 22
themes 31
tones 31
traditional text input 22
U
unlocking the keypad 10
USB port 16
V
voice dialling 20
voice messages 25
voice recorder 42
W
wallpaper 31
web 45
writing text 22