Microsoft RM-328 GSM/WCDMA cellular phone w/BT User Manual RM 328 FCC draft en 1

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT RM 328 FCC draft en 1

Manual

D R A F TRM-328User GuideRM-328_FCC-draft_en_1.fm Page 1 Tuesday, March 11, 2008 9:35 AM
D R A F TDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-328 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.© 2008 Nokia. All rights reserved.Nokia, Nokia Connecting People, N-Gage, Navi and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.This product includes software licensed from Symbian Software Ltd (c) 1998-2008. Symbian and Symbian OS are trademarks of Symbian Ltd.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2008. Tegic Communications, Inc. All rights reserved.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.Portions of the Nokia Maps software are © 1996-2007 The FreeType Project. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the 0434RM-328_FCC-draft_en_1.fm Page 2 Tuesday, March 11, 2008 9:35 AM
D R A F Tinformation in the applications or these materials. Nokia does not provide any warranty for the third-party applications.BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS. The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.RM-328_FCC-draft_en_1.fm Page 3 Tuesday, March 11, 2008 9:35 AM
4D R A F TContentsSAFETY.............................................. 6Support ............................................. 8Help ...................................................................... 8Nokia support and contact information .... 81. Get started.................................... 9Insert a (U)SIM card and battery ................. 9MicroSD card ..................................................... 9Charge the battery ........................................ 10Switch the device on and off..................... 10Configuration settings ................................. 11Transfer data................................................... 122. Your device ................................. 12Keys and parts................................................ 12Standby mode................................................. 13Indicators......................................................... 14Screen saver.................................................... 15Menu................................................................. 15Volume control............................................... 16My own key..................................................... 16Keypad lock (keyguard)................................ 16Access codes ................................................... 16Remote lock..................................................... 17Download!........................................................ 17My own............................................................. 18Connect a compatible headset.................. 18Connect a USB data cable .......................... 183. Call functions ............................. 18Make a voice call........................................... 18Answer or reject a call ................................. 20Video calls........................................................ 21Call settings..................................................... 21Video sharing.................................................. 23Log ..................................................................... 244. Positioning.................................. 25About GPS........................................................ 25Assisted GPS.................................................... 25Set up GPS connection ................................ 25Position requests............................................ 26Maps .................................................................. 27Landmarks ........................................................ 31GPS data........................................................... 325. Write text................................... 33Traditional and predictive text input........ 33Copy and delete text..................................... 346. Messaging .................................. 34Write and send messages ............................ 34Inbox.................................................................. 35Service messages............................................ 35E-mail................................................................ 36Outbox............................................................... 37Message reader............................................... 37View messages on the SIM card ................ 37Cell broadcast ................................................. 37Service commands......................................... 37Messaging settings........................................ 387. Contacts ..................................... 38Save and manage contact information ... 38Contact groups ............................................... 39Add a ringing tone......................................... 398. Gallery ........................................ 39Main view......................................................... 39Download files ................................................ 40Edit images ...................................................... 40Edit video clips................................................ 40Watch images and video clips on TV........ 41Print images..................................................... 41Print online ...................................................... 41Share online..................................................... 429. Camera........................................ 43Capture images............................................... 44Record videos .................................................. 47Camera settings.............................................. 4810.Media ........................................ 49Music player .................................................... 49Nokia Podcasting ........................................... 51FM Radio........................................................... 53RM-328_FCC-draft_en_1.fm Page 4 Tuesday, March 11, 2008 9:35 AM
5D R A F TRealPlayer ........................................................ 54Flash Player ..................................................... 55Recorder ........................................................... 5511.Internet...................................... 55Browse the web.............................................. 55Search ............................................................... 5812.Personalisation.......................... 58Themes.............................................................. 58Profiles.............................................................. 5813.Time management .................... 59Clock.................................................................. 59Calendar ........................................................... 5914.Office applications ................... 60Active notes..................................................... 60Calculator......................................................... 60Converter.......................................................... 60Mobile dictionary........................................... 61Adobe Reader.................................................. 61Quickoffice ...................................................... 6215.Settings ..................................... 62Voice commands............................................ 62Phone settings................................................ 62Speech............................................................... 6416.Data management.................... 65Install or remove applications.................... 65File manager.................................................... 66Licences............................................................. 67Device manager.............................................. 6817.Connectivity.............................. 69Data transfer ................................................... 69PC Suite............................................................. 69Bluetooth connectivity................................. 69USB connection .............................................. 71Remote synchronisation............................... 72Push to talk...................................................... 72Connection manager..................................... 7418.Enhancements .......................... 7419.Battery and chargerinformation 74Nokia battery authentication guidelines. 75Care and maintenance................... 76Additional safety information ...... 77Index ............................................... 81RM-328_FCC-draft_en_1.fm Page 5 Tuesday, March 11, 2008 9:35 AM
6SAFETYD R A F TSAFETYRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless devices may be susceptible to interference, which could affect performance.SWITCH OFF IN RESTRICTED AREASFollow any restrictions. Switch the device off in aircraft, near medical equipment, fuel, chemicals, or blasting areas.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCEYour device is not water-resistant. Keep it dry.■About your deviceThe wireless device described in this guide is approved for use on the GSM 850, 900, 1800, and 1900 and UMTS900 and 2100 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights.Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred.Your device supports several methods of connectivity. Like computers, your device may be exposed to viruses and other harmful content. Exercise caution with messages, connectivity requests, browsing, and downloads. Only install and use services and other software from trustworthy sources that offer adequate security and protection against harmful software, such as applications that are Symbian Signed or have passed the Java Verified™testing. RM-328_FCC-draft_en_1.fm Page 6 Tuesday, March 11, 2008 9:35 AM
7SAFETYD R A F TConsider installing antivirus and other security software on your device and any connected computer.Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.The office applications support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.Remember to make back-up copies or keep a written record of all important information stored in your device.During extended operation, such as an active video call and high speed data connection, the device may feel warm. In most cases, this condition is normal. If you suspect the device is not working properly, take it to the nearest authorised service facility.When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.■Network servicesTo use the phone you must have service from a wireless service provider. Many of the features require special network features. These features are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes in menu names, menu order, and icons. Contact your service provider for more information. This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as web browsing, e-mail, push to talk, iand multimedia messaging, require network support for these technologies.■Battery removingAlways switch the device off and disconnect the charger before removing the battery.RM-328_FCC-draft_en_1.fm Page 7 Tuesday, March 11, 2008 9:35 AM
8SupportD R A F TSupport■HelpYour device has context-sensitive help. To access help when an application is open, select Options > Help. To switch between help and the application that is open in the background, select and hold , and select from the list of open applications.To open help from the main menu, select > Help > Help. Select an application to view a list of help topics, and select the related help text. To open a keyword list, select Options > Search.■Nokia support and contact informationCheck www.nokia.com/support or your local Nokia website for the latest guides, additional information, downloads, and services related to your Nokia product.On the website, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centres at www.nokia.com/customerservice.For maintenance services, check your nearest Nokia service centre at www.nokia.com/repair.Software updatesNokia may produce software updates that may offer new features, enhanced functions, or improved performance. You may be able to request these updates through the Nokia Software Updater PC application. To update the device software, you need the Nokia Software Updater application and a compatible PC with Microsoft Windows 2000 or XP operating system, broadband internet access, and a compatible data cable to connect your device to the PC.To get more information and to download the Nokia Software Updater application, visit www.nokia.com/softwareupdate or your local Nokia web site.If software updates over the air are supported by your network, you may also be able to request updates through the device.Downloading software updates may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.Make sure that the device battery has enough power, or connect the charger before starting the update.RM-328_FCC-draft_en_1.fm Page 8 Tuesday, March 11, 2008 9:35 AM
9Get startedD R A F T1. Get started■Insert a (U)SIM card and batteryThis device uses BP-5M batteries.1. To open the back cover of the device, with the back of the device facing you slide the cover toward the bottom of the device (1), and remove it (2). To remove the battery, lift it from the end (3).2. Slide the (U)SIM card in the SIM card holder (4).Make sure that the gold-coloured contact area on the card is facing downward on the device, and the bevelled corner faces toward the card holder slot.3. Replace the battery (5). Replace the back cover (6).■MicroSD cardUse only compatible microSD cards approved by Nokia for use with this device. Nokia uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.Keep microSD cards out of the reach of small children.You can extend the available memory with a microSD memory card. You can insert or remove a microSD card without switching the device off.RM-328_FCC-draft_en_1.fm Page 9 Tuesday, March 11, 2008 9:35 AM
10Get startedD R A F TInsert a microSD cardNote that the memory card may be supplied with the device, and may already be inserted.1. Open the cover (1).2. Place the microSD card in the slot with gold-coloured area facing down (2).3. Push the card gently to lock it into place. Close tight the cover (3).Remove a microSD cardOpen the cover. Push the card gently to release it. Remove memory card and press 'OK' is displayed. Pull the card out, and select OK. Close the cover.■Charge the battery1. Connect the charger to the wall socket.2. Connect the charger plug to the charger connector in the device.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.The charging time depends on the charger and the battery used.■Switch the device on and offPress and hold the power key.If the device asks for a PIN code, enter the PIN code, and select OK.If the device asks for the lock code, enter the lock code, and select OK. The factory setting for the lock code is 12345.For more information about access codes, see ‘Access codes,’ p. 16.To set the correct time zone, time, and date, select the country you are presently in, then enter the local time and date. See also ‘Clock,’ p. 59.RM-328_FCC-draft_en_1.fm Page 10 Tuesday, March 11, 2008 9:35 AM
11Get startedD R A F TMy NokiaMy Nokia is a free service that sends you tips, tricks, and support for your Nokia device regularly as text messages. If My Nokia is available in your country and supported by your service provider, your device invites you to join the My Nokia service after you have set the time and the date.Select the language for the service. If you change the language, the device restarts. To sign-up to My Nokia , select Accept and follow the instructions on the display.To sign-up to My Nokia later, select > Applications > My Nokia.After the invitation to join My Nokia, the Welcome application starts. With the Welcome application, you can access the following applications:Sett. wizard — Configure connection settings. See ‘Settings wizard,’ p. 12.Switch — Copy or synchronise data from other compatible devices.Tutorial — Learn about the features of your device and how to use them. To start the tutorial later, select > Help > Tutorial and a tutorial item.To open Welcome later, select > Help > Welcome.Antenna locationsCellular antenna (1)GPS antenna (2)Bluetooth antenna (3)Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.■Configuration settingsBefore you can use multimedia messaging, push to talk, e-mail, synchronisation, streaming, and the browser, you must have the proper configuration settings on your device. Your device may automatically configure browser, multimedia messaging, access point, and streaming settings based on the SIM card used. If not, you can use the setting wizard application to configure the settings. You may receive the settings directly as a configuration message, which you can save to RM-328_FCC-draft_en_1.fm Page 11 Tuesday, March 11, 2008 9:35 AM
12Your deviceD R A F Tyour device. For more information on availability, contact your service provider or nearest authorised Nokia dealer.When you receive a configuration message, and the settings are not automatically saved and activated, 1 new message is displayed. To save the settings, select Show > Options > Save. You may need to enter a PIN code provided by the service provider.Settings wizardThe setting wizard application configures your device for operator and e-mail settings based on your service provider. Configuring other settings may also be possible.To use these services, you may have to contact your service provider to activate a data connection or other services.Select > Settings > Sett. wizard.■Transfer dataTo transfer information, such as contacts, from your old device, see ‘Data transfer,’ p. 69.2. Your device■Keys and partsEarpiece (1)Secondary camera lens (2)Display (3)Left and right selection keys (4)Menu key (5),hereafter described as "select "Clear key (6)Call key (7)End key (8)Number keys (9)Navi™ scroll key, hereafter referred to as scroll key, and status light around it (10)RM-328_FCC-draft_en_1.fm Page 12 Tuesday, March 11, 2008 9:35 AM
13Your deviceD R A F TGPS light (11)My own key (12)microSD card slot (13)Microphone (14)Micro USB connector (15)Charger connector (16)Nokia AV Connector (2.5 mm) (17)Loudspeaker (18)Camera flash (19)Main camera lens (20)Camera lens cover opening slide (21)Power key (22)Volume key (23)Camera key (24)■Standby modeWhen you have switched on the device, and it is registered to a network, the device is in the standby mode and ready for use.To open a list of most recently dialled numbers, press the call key.To use the voice commands or voice dialling, press and hold the right selection key.To change the profile, press the power key, and select a profile.To start a connection to the web, press and hold 0.To select the view for the standby mode, select > Settings > Phone sett. > General > Personalisation > Standby mode > Standby theme.Depending on the selected standby theme, you can select applications or events to add to a shortcut list in the standby mode or the scroll keys. To select the applications or events, select > Settings > Phone sett. > General > Personalisation > Standby mode > Shortcuts.Offline profileTo quickly activate the offline profile, press the power key, and select Offline. To leave the offline profile, press the power key, and select another profile.RM-328_FCC-draft_en_1.fm Page 13 Tuesday, March 11, 2008 9:35 AM
14Your deviceD R A F TWhen the offline profile is active, all the connections to a cellular network are turned off. However, you can use your device without a SIM card, and listen to the radio or music using the music player. Remember to switch off your device when wireless phone use is prohibited.Important: In the offline profile you cannot make or receive any calls, or use other features that require cellular network coverage. Calls may still be possible to the official emergency number programmed into your device. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.■IndicatorsIcons or — The device is connected to a UMTS or GSM network.— HSDPA (network service) in the UMTS network is activated. — The device is in the offline mode and not connected to a cellular network. — A memory card is inserted in the device. — You have unread messages in the inbox in Messaging. — You received new e-mail in your remote mailbox. — You have messages waiting to be sent in outbox. — You have missed calls. — Ringing type is set to Silent and Message alert tone and E-mail alert tone are set to Off. — The device keypad is locked. — The loudspeaker is activated. — An alarm is active. — All calls to the device are diverted to another number. or — A headset or a loopset is connected to the device. or or — A GPRS packet data connection is active, the connection is on hold, or a connection is available. or or — A packet data connection is active in a part of the network that supports EGPRS; the connection is on hold; a connection is available. Your device may not use EGPRS in the data transfer. or or — A UMTS packet data connection is active; the connection is on hold; a connection is available.RM-328_FCC-draft_en_1.fm Page 14 Tuesday, March 11, 2008 9:35 AM
15Your deviceD R A F T or — Bluetooth connectivity is switched on; data is being transmitted using Bluetooth technology. — A USB connection is active.Other indicators may also be shown.GPS lightThe GPS light blinks when your device is trying to establish a GPS connection, and remains on when the GPS connection is established.Status lightYou can set the light around the scroll key to blink slowly to indicate the standby mode. The light turns on for a few second at intervals of approximately 20 seconds. To indicate missed events, the light blinks faster for an hour after the missed event.To activate the light indicator, select > Settings > Phone sett. > General > Personalisation > Standby mode > Status light > On.■Screen saverTo set the screen saver settings, select > Settings > Phone sett. > General > Personalisation > Display > Screen saver. To set the timeout period after which the screen saver is activated, select Screen saver time-out. To set for how long the screen saver is active, select Screen saver duration.■MenuIn the menu you can access the functions in your device. To access the main menu, select .To open an application or a folder, scroll to it, and press the scroll key.If you change the order of the functions in the menu, the order may differ from the default order described in this user guide.To mark or unmark an item in applications, press #. To mark or unmark several consecutive items, press and hold #, and scroll up or down.To change the menu view, select Options > Change Menu view and a view type.To close an application or a folder, select Back and Exit as many times as needed to return to the standby mode, or select Options > Exit.To display and switch between open applications, press and hold . Scroll to an application, and select it.RM-328_FCC-draft_en_1.fm Page 15 Tuesday, March 11, 2008 9:35 AM
16Your deviceD R A F TLeaving applications running in the background increases the demand on battery power and reduces the battery life.■Volume controlTo adjust the earpiece or loudspeaker volume during a call or when listening to an audio file, press the volume keys. To activate or deactivate the loudspeaker during a call, select Loudsp. or Handset.Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. ■My own keyBy default, the Maps application opens when you press the my own key. To set another application to open, select > Settings > Phone sett. > General > My own key > My own key and an application. ■Keypad lock (keyguard)To lock the keypad in the standby mode, press the left selection key and * within 1.5 seconds. To set the device to automatically lock the keypad after a certain time, select > Settings > Phone sett. > General > Security > Phone and SIM card > Keypad autolock period > User defined and the desired time.To unlock the keypad, select Unlock, and press * within 1.5 seconds. When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device. ■Access codesTo set how your device uses the access codes, select > Settings > Phone sett. > General > Security > Phone and SIM card.Lock codeThe lock code (5 digits) helps to lock your device. The preset code is 12345. Change the code, and set the device to request the code.When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device.PIN codesThe personal identification number (PIN) code or the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card. The (U)PIN code is usually supplied with the SIM card. Set the device to request the code each time the device is switched on.RM-328_FCC-draft_en_1.fm Page 16 Tuesday, March 11, 2008 9:35 AM
17Your deviceD R A F TThe PIN2 code may be supplied with the SIM card and is required for some functions.The module PIN is required to access the information in the security module. The signing PIN is required for the digital signature. The module PIN and the signing PIN are supplied with the SIM card if the SIM card has a security module in it.PUK codesThe personal unblocking key (PUK) code or the universal personal unblocking key (UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code.If needed, contact your local service provider for the codes.Barring passwordThe barring password (4 digits) is required when using call barring. You can obtain the password from your service provider. If the password is blocked, contact your service provider.■Remote lockYou can lock your device from another device using a text message. To enable your device to be locked remotely, and to define the message text to be used, select > Settings > Phone sett. > General > Security > Phone and SIM card > Remote phone locking. The message can be up to 20 characters long.To lock your device, send the text message to your mobile phone number. To open your device later, select Unlock, and enter the lock code.■Download!Download! (network service) is a mobile content shop available on your device. With Download! you can discover, preview, buy, download, and upgrade content, services, and applications. The items are categorised under catalogs and folders provided by different service providers. The available content depends on your service provider.Select > Applications > Download!.Download! uses your network services to access the most up-to-date content. For information on additional items available through Download!, contact your service provider, or the supplier or manufacturer of the item.RM-328_FCC-draft_en_1.fm Page 17 Tuesday, March 11, 2008 9:35 AM
18Call functionsD R A F T■My ownYou can download applications to your device. To access the applications, select > Applications > My own. Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing.■Connect a compatible headsetDo not connect products that create an output signal as this may cause damage to the device. Do not connect any voltage source to the Nokia AV Connector.When connecting any external device or any headset, other than those approved by Nokia for use with this device, to the Nokia AV Connector, pay special attention to volume levels.■Connect a USB data cableConnect a compatible USB data cable to the USB connector.To select the default USB connection mode or change the active mode, select > Settings > Connectivity > USB > USB connection mode and the desired mode. To set whether the default mode is activated automatically, select Ask on connection > No.3. Call functionsTo adjust the volume during a call, press the volume keys.■Make a voice call1. In the standby mode, enter the phone number, including the area code. Press the clear key to remove a number.For international calls, press * twice for the international prefix (the + character replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.RM-328_FCC-draft_en_1.fm Page 18 Tuesday, March 11, 2008 9:35 AM
19Call functionsD R A F T2. To call the number, press the call key.3. To end the call, or to cancel the call attempt, press the end key.To make a call from Contacts, select > Contacts. Scroll to the desired name; or enter the first letters of the name, and scroll to the desired name. To call the number, press the call key.To call a recently dialled number from the standby mode, press the call key.Speed diallingSpeed dialling is a quick way to call frequently used numbers from the standby mode. You need to assign a phone number to the speed dialling keys 3 to 9 (the 1 and 2 keys are reserved for the voice and video call mailboxes), and set Speed dialling to On.To assign a phone number to a speed dialling key, select > Settings > Speed dial. Scroll to a key icon, and select Assign. Select the contact and the relevant speed dialling key. To change the number, select Options > Change.To activate the speed dialling, select > Settings > Phone sett. > Phone > Call > Speed dialling > On.To call a speed dialling number, press and hold the speed dialling key until the call begins. Call mailboxTo call your call mailboxes (network service), from the standby mode, press and hold 1 or 2. You can have call mailboxes for voice calls, video calls, and multiple phone lines.To define the call mailbox number if no number is set, select > Settings > Call mailbox. Scroll to Voice mailbox (or Video mailbox), and enter the corresponding mailbox number. To change the call mailbox number, select Options > Change number. Contact your service provider for the call mailbox number.Voice diallingA voice tag is added automatically to all entries in Contacts. Use long names, and avoid similar names for different numbers.Make a voice dialling callVoice tags are sensitive to background noise. Use voice tags in a quiet environment.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialling in all circumstances.RM-328_FCC-draft_en_1.fm Page 19 Tuesday, March 11, 2008 9:35 AM
20Call functionsD R A F T1. In the standby mode, press and hold the right selection key.If you are using a compatible headset with the headset key, press and hold the headset key.2. When Speak now is displayed, speak the voice command clearly. The device plays the voice command of the best match. After 1.5 seconds, the device dials the number; if the result is not the correct one, before dialling select another entry.Make a conference callYour device supports conference calls (network service) between a maximum of six participants, including yourself.1. Make a call to the first participant.2. To make a call to another participant, select Options > New call.3. To create the conference call when the new call is answered, select Options > Conference.To add another person to the conference call, repeat step 2, and select Options > Conference > Add to conference.4. To end the conference call, press the end key.■Answer or reject a callTo answer a call, press the call key.To mute the ringing tone, select Silence.To reject the call, press the end key, or select Options > Reject. If you have activated Call divert > If busy, rejecting the call diverts the call.To send a text message as a reply to the caller instead of answering the call, select Options > Send message. To activate the text message reply and edit the message, select > Settings > Phone sett. > Phone > Call > Reject call with message and Message text.Call waitingDuring a call, to answer the waiting call, press the call key. The first call is put on hold. To switch between the two calls, select Swap. To end the active call, press the end key.To activate the call waiting function (network service), select > Settings > Phone sett. > Phone > Call > Call waiting > Activate.RM-328_FCC-draft_en_1.fm Page 20 Tuesday, March 11, 2008 9:35 AM
21Call functionsD R A F T■Video callsMake a video callTo make a video call, you may need to have a USIM card and be within the coverage of a UMTS network. For availability of and subscription to video call services, contact your service provider. A video call can only be made between two parties and when no other voice, video, or data calls are active. The video call can be made to a compatible mobile phone or an ISDN client.You have captured a still image to be sent instead of video sending.You have denied video sending from your device.1. Enter the phone number in the standby mode and select Video call. Or, select > Contacts, scroll to the desired contact, and select Options > Video call.2. To change between showing video or only hearing sound during a video call, select from the toolbar Enable video sending or Disable video sending.If you have denied video sending during a video call, the call is still charged as a video call. Check the pricing with your network operator or service provider.3. To end the video call, press the end key.Answer a video callWhen a video call arrives, is displayed.To answer the video call, press the call key. Allow video image to be sent to caller? is shown. If you select Yes, the image captured by the camera in your device is shown to the caller. Otherwise, video sending is not activated.If you have denied video sending during a video call, the call is still charged as a video call. Check the pricing with your service provider.To end the video call, press the end key.■Call settingsCallSelect > Settings > Phone sett. > Phone > Call and from the following:Send my caller ID (network service) — to display or hide your phone number from the person to whom you are callingCall waiting (network service) — See ‘Call waiting,’ p. 20.Reject call with message and Message text — See ‘Answer or reject a call,’ p. 20.RM-328_FCC-draft_en_1.fm Page 21 Tuesday, March 11, 2008 9:35 AM
22Call functionsD R A F TOwn video in recvd. call— to set whether you allow to send your own video image when you receive a video callImage in video call — to select a still image to be shown when you deny a video callAutomatic redial — to set your device to make a maximum of 10 attempts to connect the call after an unsuccessful call attemptShow call duration and Summary after call — to set the device to display the call duration during a call and the approximate duration of the last callSpeed dialling — See ‘Speed dialling,’ p. 19.Anykey answer — to answer an incoming call by briefly pressing any key, except the left and right selection keys, volume keys, power key, and end key.Line in use (network service) — to select the phone lines for making calls and sending short messages. This is shown only if the SIM card supports two phone lines.Line change (network service) — to enable or disable the line selectionCall divert1. Select > Settings > Phone sett. > Phone > Call divert (network service).2. Select which calls you want to divert, for example, Voice calls.3. Select the desired option. For example, to divert voice calls when your number is busy or when you reject an incoming call, select If busy.4. Select Options > Activate and the phone number to which you want to divert the calls. Several divert options can be active at the same time.Call barring and call diverting cannot be active at the same time.Call barring1. Select > Settings > Phone sett. > Phone > Call barring (network service) to restrict the calls that you make and receive with your device. 2. Scroll to the desired barring option, and select Options > Activate. To change the settings, you need the barring password given by your service provider.Call barring and call diverting cannot be active at the same time.When calls are barred, calls may be possible to certain official emergency numbers.NetworkSelect > Settings > Phone sett. > Phone > Network and from the following:RM-328_FCC-draft_en_1.fm Page 22 Tuesday, March 11, 2008 9:35 AM
23Call functionsD R A F TNetwork mode — to select which network to use (this is shown only if it is supported by the service provider). If you select Dual mode, the device uses the GSM or UMTS network automatically.Operator selection — To set the device to search for and automatically select one of the available networks, select Automatic. To select the desired network manually from a list of networks, select Manual. The selected network must have a roaming agreement with your home network.Cell info display (network service) — to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology, and to activate cell info reception■Video sharingUse video sharing to send live video from your mobile device to another compatible mobile device during a voice call.Video sharing requirementsVideo sharing requires a 3G universal mobile telecommunications system (UMTS) connection. For information about network availability and the fees associated with this application, contact your service provider.To use video sharing you must do the following:• Ensure that your device is set up for person-to-person connections.• Ensure that both the sender and recipient are registered to the UMTS network.• Ensure you have an active UMTS connection and you are within UMTS network coverage. If you move away from a UMTS network during the sharing session, the sharing session is discontinued, but your voice call continues.Video sharing settingsA person-to-person connection is also known as a session initiation protocol (SIP) connection. Before you can use video sharing, ask your service provider for the configured SIP profile to be used in your device.Select > Settings > Phone sett. > Connection > Video sharing and from the following:Video sharing — to select whether the video sharing is enabledSIP profile — to select a SIP profileVideo saving — to set whether the live videos are automatically savedRM-328_FCC-draft_en_1.fm Page 23 Tuesday, March 11, 2008 9:35 AM
24Call functionsD R A F TPreferred saving memory — to select whether to save the videos to the device memory or to a memory cardCapability alert tone — to set an alert tone to sound when video sharing is available during a callIf you know a recipient’s SIP address, you can save it to Contacts. Select > Contacts, the contact, and Options > Edit > Options > Add detail > SIP or Share video. Enter the SIP address (username@domainname). You can use an IP address instead of a domain name. Share live video or video clip1. To share live video you are recording with the device camera, select Options > Share video > Live video during a voice call. To share a saved video clip, select Video clip and the clip you want to share.2. The device sends the invitation to the SIP address you saved to Contacts.If necessary, to send the invitation, select the SIP address of the recipient; or enter a SIP address, and select OK.3. Sharing begins automatically when the recipient accepts the invitation, and the loudspeaker is active. Use the toolbar buttons to control the video sharing.4. To end the sharing session, select Stop. To end the voice call, press the end key.Accept an invitationYour device rings when you receive an invitation. The invitation shows the sender’s name or SIP address. Select Yes to begin the sharing session. To decline the invitation and to return to the voice call, select No.■LogTo view missed, received, or dialled calls; text messages; packet data connections; and fax and data calls registered by the device, select > Log.In the standby mode, you can use the call key as a shortcut to Dialled numbers in the Recent calls log (network service).Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Note: Some timers, including the life timer, may be reset during service or software upgrades.RM-328_FCC-draft_en_1.fm Page 24 Tuesday, March 11, 2008 9:35 AM
25PositioningD R A F T4. PositioningYou can use applications such as Maps and GPS data to find out your location, or measure distances and coordinates. These applications require a GPS connection.■About GPSYour device has an internal GPS receiver. The Global Positioning System (GPS) is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. The accuracy of location data can be affected by adjustments to GPS satellites made by the United States government and is subject to change with the United States Department of Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be affected by poor satellite geometry. Availability and quality of GPS signals may be affected by your location, buildings, natural obstacles, and weather conditions. The GPS receiver should only be used outdoors to allow reception of GPS signals.Any GPS should not be used for precise location measurement, and you should never rely solely on location data from the GPS receiver and cellular radio networks for positioning or navigation.■Assisted GPSAssisted GPS (A-GPS) is used to retrieve assistance data over a packet data connection, which assists in calculating the coordinates of your current location when your device is receiving signals from satellites.Your network operator may charge you for this connection according to your network subscription. Contact your service provider for the correct internet access point and charges related to the service.Your device is preconfigured to use the Nokia A-GPS service, if no service provider-specific A-GPS settings are available. The assistance data is retrieved from the Nokia A-GPS service server only when needed. To disable different positioning methods, see ‘Positioning settings,’ p. 25.To use A-GPS, you must have a packet data internet access point defined. See ‘Positioning settings,’ p. 25.■Set up GPS connectionPositioning settingsSelect > Settings > Phone sett. > General > Positioning and from the following:Positioning methods — to enable or disable different positioning methodsRM-328_FCC-draft_en_1.fm Page 25 Tuesday, March 11, 2008 9:35 AM
26PositioningD R A F TPositioning server — To define an access point for A-GPS, select Access point. Only a packet data internet access point can be used. Your device asks for the internet access point when GPS is used for the first time.Notation preferences — to define the measurement system and coordinate formatHold your device correctlyWhen using the receiver, from an upright position, move the device to an angle of about 45 degrees, with an unobstructed view of the sky.Establishing a GPS connection may take from a couple of seconds to several minutes, even longer in a vehicle. See ‘GPS light,’ p. 15.Using the GPS receiver may drain the device battery faster.If your device cannot find the satellite signal, consider the following:• If you are indoors, go outdoors to receive a better signal.• If you are outdoors, move to a more open space.• Check that your hand does not cover the GPS receiver of your device.• If the weather conditions are bad, the signal strength may be affected.• Some vehicles have tinted (athermic) windows, which may block the satellite signals.Satellite signal statusTo check how many satellites your device has found, and whether your device is receiving satellite signals, select > Applications > GPS data > Position > Options > Satellite status.If your device has found satellites, a bar for each satellite is shown in the satellite information view. When your device has received enough data from the satellite signal to calculate the coordinates of your location, the bars turn grey.■Position requestsYou may receive a request from a network service to receive your position information. Service providers may offer information about local topics, such as weather or traffic conditions, based upon the location of your device.When you receive a position request to allow your position information to be sent, select Accept, or to deny the request, select Reject.RM-328_FCC-draft_en_1.fm Page 26 Tuesday, March 11, 2008 9:35 AM
27PositioningD R A F T■MapsThe map coverage varies by country or region. For example, maps may not be available due to legal restrictions of countries or regions. To the maximum extent permitted by applicable law, Nokia disclaims any and all warranty with respect to the availability, accuracy, correctness or update of maps.About MapsWith Maps, you can see your current location on the map, browse maps for different cities and countries, search for addresses and different points of interest, plan routes from one location to another, and save locations as landmarks and send them to compatible devices. You can also purchase extra services, such as travel guides, traffic information, and navigation service with voice guidance. These services are not available in all countries or regions.Some maps may be pre-loaded on the memory card in your device. You can download more maps through the internet using Nokia Maps Loader PC software. See ‘Download maps,’ p. 29.Maps uses GPS. See ‘Positioning,’ p. 25. You can define the positioning methods used with your device. See ‘Positioning settings,’ p. 25. For the most accurate location information, use either the internal GPS or a compatible external GPS receiver.Browse mapsSelect > Maps; or press the my own key. See ‘My own key,’ p. 16.When you use Maps for the first time, you may need to select a cellular access point for downloading map information for your current location. To change the default access point later, select Options > Tools > Settings > Internet > Network destination.To receive a note when your device registers to a network outside your home network, select Options > Tools > Settings > Internet > Roaming warning > On. Contact your network service provider for details and roaming costs.The data transfer indicator shows the internet connection used and the amount of data transferred since the application started.Almost all digital cartography is inaccurate and incomplete to some extent. Never rely solely on the cartography that you download for use in this device.RM-328_FCC-draft_en_1.fm Page 27 Tuesday, March 11, 2008 9:35 AM
28PositioningD R A F TWhen you open Maps, the capital city of the country you are in or the location that was saved from your last session is shown. The map of the location is also downloaded, if needed.To establish a GPS connection and zoom in to your last known location, press 0, or select Options > My position.A GPS indicator on the bottom right of the display shows the availability and strength of the satellite signal. One bar indicates one satellite. When the device receives enough data from the satellite to establish a GPS connection, the bar turns green. Your device must receive signals from at least four satellites to calculate the coordinates of your location. After the initial calculation, signals from three satellites may be enough.To zoom in or out, press * or #. To move on the map, use the scroll keys. A new map is automatically downloaded if you scroll to an area which is not covered by maps already downloaded. See ‘Download maps,’ p. 29. The maps are free of charge, but downloading may involve the transmission of large amounts of data through your service provider's network. For more information on data transmission charges, contact your service provider. The maps are automatically saved in the device memory or on a compatible memory card (if inserted).Find locationsTo find a location in the city or area displayed on the map, enter the full or partial address of the location in the search field, and press the scroll key. To find a location in another city, enter the city and the address, and select Search.To find a specific address, select Options > Search > Addresses. Country/Region and City or post code are mandatory.To browse through places and attractions by categories in your area, select Options > Search, and a category.To find an address saved in Contacts, select Options > Search > Addresses > Options > Select from Contacts.Save and send locationsTo save a location to your device, press the scroll key, and select Add > To places.To send a location to a compatible device, press the scroll key, and select Send. If you send the location in a text message, the information is converted to plain text.RM-328_FCC-draft_en_1.fm Page 28 Tuesday, March 11, 2008 9:35 AM
29PositioningD R A F TView your saved itemsTo view the locations or routes you have saved to your device, select Options > Favourites > Places or Routes.To check which locations you have searched for on the map, select Options > Favourites > History.To create a collection of your favourite places, select Options > Favourites > Collections > New collection. Enter the name for the collection. To add locations to your collection, open Places, scroll to a location, press the scroll key, and select Add > To collection.Download mapsWhen you browse a map on the display in Maps, a new map is automatically downloaded if you scroll to an area which is not covered by maps already downloaded. The data counter (kB) on the display shows the amount of network traffic when you browse maps, create routes, or search for locations online.Downloading maps may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges.To prevent automatic downloading of maps, for example, when you are outside your home network, select Options > Tools > Settings > Internet > Go online at start-up > No.To define the memory to be used and how much memory space you want to use for saving maps or voice guidance files, select Options > Tools > Settings > Map > Memory to be used and Maximum memory use. When the memory is full, the oldest map data is deleted. The saved maps data can be deleted using Nokia Map Loader PC software.Nokia Map LoaderNokia Map Loader is PC software that you can use to download and install maps and extra services from the internet to a compatible memory card. Use the Maps application and browse maps at least once before using Nokia Map Loader, as Nokia Map Loader uses the Maps history information.To install Nokia Map Loader to a compatible PC, see http://maps.nokia.com, and follow the instructions on the screen.RM-328_FCC-draft_en_1.fm Page 29 Tuesday, March 11, 2008 9:35 AM
30PositioningD R A F TPlan a routeTo plan a route, select a location on the map or search for a location, press the scroll key, and select Add > To route.To add more locations for your route, select Options > Add stopover, search for the location.To edit the route, press the scroll key, and select Edit route.To define the settings for the route, select Options > Settings.To show the route on the map, select Options > Show route.To navigate to the destination by car or on foot, if your have purchased these extra services, select Options > Start driving or Start walking.To save the route, select Options > Save route.Extra services for MapsYou can purchase a navigation licence and download different kinds of travel guides to your device. You can purchase a licence for pedestrian or car navigation and traffic information service.Downloading extra services may involve the transmission of large amounts of data through your service provider’s network. Contact your service provider for information about data transmission charges.Navigate to the destinationTip: To try out navigation for a certain time with a free licence, select Maps > Options > Drive to or Walk to. Maps checks if a free licence is available for your device. To activate the licence, select OK. You can only use the licence once.To purchase a licence for pedestrian and car navigation with voice guidance, select Options > Extras > Drive & Walk. To purchase a licence for pedestrian navigation only, select Walk. You can pay for the service using a credit card or in your phone bill, if supported by your service provider.To start navigating, select a location, press the scroll key, and select Drive to or Walk to.When you use car navigation for the first time, your device asks you to select the language for the voice guidance and download the voice guidance files. To change the language later, in the Maps main view, select Options > Tools > Settings > Navigation > Voice guidance. Voice guidence is not available for pedestrian navigation.RM-328_FCC-draft_en_1.fm Page 30 Tuesday, March 11, 2008 9:35 AM
31PositioningD R A F TTo switch between different map views during the navigation, press the scroll key, and select Manoeuvre view, Bird’s-eye view, or Arrow view.To discard the created route and use another route, select Options > Diff. route.To stop navigating, select Options > Stop.Traffic informationThe real-time traffic information service is an extra service that provides information about events that may affect your travel. You can purchase the service and download it to your device if available in your country or region.To purchase a licence for the traffic information service, select Options > Extras > Traffic info.To view information about traffic events, select Options > Traffic info. The events are shown on the map as triangles and lines.To view details of an event, including possible rerouting options, select the event and Options > Open.To update the traffic information, select Update traffic info.Travel guidesTo purchase and download travel guides, or to view downloaded ones, select Options > Extras > Guides.To browse travel guide categories, select a category. If there are subcategories, select a subcategory.To download a new guide to your device, scroll to the desired guide, and select Yes. You can pay for the guides using a credit card or in your phone bill, if supported by your service provider.■LandmarksSelect > Applications > Landmarks. With Landmarks you can save the position information of specific locations in your device. You can use your saved landmarks in compatible applications, such as GPS data and Maps.To create a new landmark, select > Applications > Landmarks > Options > New landmark. To make a positioning request for the coordinates of your location, select Current position. To enter the position information manually, select Enter manually.To add a landmark to preset categories, select the landmark, and Options > Add to category. Select the categories to which you want to add the landmark.RM-328_FCC-draft_en_1.fm Page 31 Tuesday, March 11, 2008 9:35 AM
32PositioningD R A F TTo send one or several landmarks to a compatible device, select Options > Send. Your received landmarks are placed in Inbox in Messaging.■GPS dataGPS data is designed to provide route guidance information to a selected destination, position information about your location, and travelling information, such as the approximate distance and travel time to the destination.Route guidanceStart the route guidance outdoors. Select > Applications > GPS data > Navigation.Route guidance shows the straightest route and the shortest distance to the destination, measured in a straight line. Any obstacles on the route, such as buildings and natural obstacles, are ignored. Differences in altitude are not taken into account when calculating the distance. Route guidance is active only when you move.To set your trip destination, select Options > Set destination and a landmark as the destination, or enter the latitude and longitude coordinates. To clear the destination, select Stop navigation.PositionTo save your location as a landmark, select > Applications > GPS data > Position > Options > Save position.Trip meterTo activate trip distance calculation, select > Applications > GPS data > Trip distance > Options > Start. To deactivate it, select Options > Stop. The calculated values remain on the display.To set the trip distance and time and average and maximum speeds to zero, and to start a new calculation, select Reset. To set the odometer and total time to zero, select Restart.The trip meter has limited accuracy, and rounding errors may occur. Accuracy can also be affected by availability and quality of GPS signals.RM-328_FCC-draft_en_1.fm Page 32 Tuesday, March 11, 2008 9:35 AM
33Write textD R A F T5. Write text■Traditional and predictive text inputWhen you write text, on the display indicates predictive text input and traditional text input. To set the predictive text input on or off, press # repeatedly, or press *, and select Activate predictive text or Predictive text > Off., , or next to the text input indicator indicates the character case or number mode. To change the character case, or to change between letter and number mode, press # repeatedly.To change the writing language of your device, select > Settings > Phone sett. > General > Personalisation > Language > Writing language. The writing language affects the characters available when writing text and the predictive text dictionary used. Not all characters available under a number key are printed on the key.Write with traditional text inputPress a number key, 2 to 9, repeatedly until the desired character appears. Press the 1key for the most common punctuation marks and special characters.If the next letter you want is on the same key as the present one, wait until the cursor appears (or scroll forward to end the time-out period), and enter the letter.Write with predictive text input1. Press a number key, 2–9, only once for one letter. The word changes after every keypress. For the most common punctuation marks, press 1.2. When you have finished the word and it is correct, to confirm it, scroll forward or insert a space.If the word is not correct, to view the matching words the dictionary has found one by one, press * repeatedly.If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, select Spell. Enter the word (up to 32 letters), and select OK. The word is added to the dictionary. When the dictionary becomes full, a new word replaces the oldest added word.Common functions in traditional and predictive text inputTo insert a number, press and hold the number key.To enter punctuation marks and special characters, press and hold *.RM-328_FCC-draft_en_1.fm Page 33 Tuesday, March 11, 2008 9:35 AM
34MessagingD R A F TTo erase a character, press the clear key. To erase more characters, press and hold the clear key.To insert a space, press 0. To move the cursor to the next line, press 0 three times.■Copy and delete text1. To select letters and words, press and hold #, and at the same time scroll left or right. To select lines of text, press and hold #, and at the same time scroll up or down. 2. To copy the text, press and hold #, and at the same time select Copy.To delete the selected text, press the clear key.3. To insert the text, scroll to the insertion point, press and hold #, and at the same time select Paste.6. MessagingBefore you can receive or send messages or e-mail, you must have the necessary settings and access points defined. Contact your service provider for the settings.■Write and send messagesYour device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options, take up more space, limiting the number of characters that can be sent in a single message. The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.1. Select > Messaging > New message and the message type. To create a text message or multimedia message, select Message. The message type changes automatically based on the content.2. In the To field, enter the phone numbers or e-mail addresses of the recipients, or, to select recipients from Contacts, press the scroll key. Separate recipients with a semicolon (;).RM-328_FCC-draft_en_1.fm Page 34 Tuesday, March 11, 2008 9:35 AM
35MessagingD R A F T3. To enter the subject for a multimedia, or e-mail message, scroll down to the Subject field. If the subject field is not visible for a multimedia message, select Options > Message header fields, mark Subject, and select OK.4. Scroll down to the message field and enter the message content.When you write a text message, the message length indicator shows how many characters you can enter in the message. For example, 10 (2) means that you can still add 10 characters for the text to be sent as a series of two text messages.To insert an object, such as an image, video clip, note, or a business card, to a multimedia, or e-mail message, press the scroll key, and select Insert content.To record a new sound clip for an audio message, select Record. To use a previously recorded sound clip, select Options > Insert sound clip > From Gallery.5. To send the message, select Options > Send.■InboxInbox contains received messages except e-mail and cell broadcast messages. To read received messages, select > Messaging > Inbox and the message.To view the list of media objects that are included in the multimedia message, open the message, and select Options > Objects.Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. Your device can receive many kinds of messages, such as operator logos, business cards, calendar entries, and ringing tones. You can save the special message content to your device. For example, to save a received calendar entry to the calendar, select Options > Save to Calendar.Note: The picture message function can be used only if it is supported by your service provider. Only compatible devices that offer picture message features can receive and display picture messages. The appearance of a message may vary depending on the receiving device.■Service messagesService messages (network service) are notifications that may contain a text message or the address of a browser service.RM-328_FCC-draft_en_1.fm Page 35 Tuesday, March 11, 2008 9:35 AM
36MessagingD R A F TTo define whether service messages are enabled and whether the messages are downloaded automatically, select > Messaging > Options > Settings > Service message.■E-mailWhen you create a new mailbox, the name you give to the mailbox replaces New mailbox. You can have up to six mailboxes.IMAP4 and POP3 mailboxesSelect > Messaging and the mailbox. Connect to mailbox? is displayed. To connect to your mailbox (network service), select Yes, or to view previously retrieved e-mail messages offline, select No.To connect to the mailbox afterwards, select Options > Connect. When you are online, to end the data connection to the remote mailbox, select Options > Disconnect.Retrieve and read e-mail messagesImportant: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC. 1. Select Options > Retrieve e-mail and whether you want to retrieve new, selected, or all messages.2. To open an e-mail message, select it.To view e-mail attachments, indicated with , select Options > Attachments. You can retrieve, open, or save attachments in supported formats.Delete e-mail messagesTo delete an e-mail message from the device and retain it in the remote mailbox, select Options > Delete > Phone only. To delete an e-mail from both the device and the remote mailbox, select Options > Delete > Phone and server.To cancel deletion of an e-mail from both the device and server, scroll to an e-mail that has been marked to be deleted during the next connection, and select Options > Restore.Sync mailboxesSelect > Messaging and the sync mailbox.To synchronise your device with the remote mailbox, select Options > Synchronisation > Start.To view received messages, select Inbox and the message.RM-328_FCC-draft_en_1.fm Page 36 Tuesday, March 11, 2008 9:35 AM
37MessagingD R A F T■OutboxThe outbox folder is a temporary storage place for messages that are waiting to be sent. To access the outbox folder, select > Messaging > Outbox.To retry sending a message, scroll to the message and select Options > Send.To postpone sending a message, scroll to a message, and select Options > Defer sending.■Message readerTo listen to a message in Inbox or a mailbox, scroll to the message or mark the messages, and select Options > Listen.Tip: When you have received a new message, to listen to the received messages, in the standby mode, press and hold the left selection key until Msg. reader starts.To select the default language and voice used for reading messages, and adjust the voice properties, such as rate and volume, select > Settings > Speech.To select other settings for the message reader, in Speech, scroll right to Settings.■View messages on the SIM cardBefore you can view SIM messages, you need to copy them to a folder in your device. Select > Messaging > Options > SIM messages, mark the messages you want to copy, and select Options > Copy and the folder to which you want to copy the messages.■Cell broadcastCheck with your service provider whether cell broadcast (network service) is available and what the available topics and related topic numbers are.Select > Messaging > Options > Cell broadcast. To activate the service, select Options > Settings > Reception > On.■Service commandsTo enter and send service commands (also known as USSD commands) such as activation commands for network services to your service provider, select > Messaging > Options > Service commands. To send the command, select Options > Send.RM-328_FCC-draft_en_1.fm Page 37 Tuesday, March 11, 2008 9:35 AM
38ContactsD R A F T■Messaging settingsText message settingsTo define text message settings, such as the message centre and character encoding used, select > Messaging > Options > Settings > Text message.Multimedia messaging settingsTo define multimedia message settings, such as which access point is used and whether multimedia messages are retrieved automatically, select > Messaging > Options > Settings > Multimedia message.E-mail settingsSelect > Messaging > Options > Settings > E-mail > Mailboxes, the mailbox and from the following:Connection settings — to define the connection settings, such as the servers and protocol usedUser settings — to define user settings, such as when messages are sent and whether to include a signatureRetrieval settings — to define retrieval settings, such as which parts of the messages are retrieved and how many messages are retrievedAutomatic retrieval — to define settings for retrieving messages automatically at set intervals or when an e-mail notification is received from the serverOther settingsTo define whether a specified number of sent messages are saved to the Sent folder and whether to store the messages in the device memory or memory card, select > Messaging > Options > Settings > Other.7. Contacts■Save and manage contact informationTo save and manage contact information, such as names, phone numbers, and addresses, select > Contacts.To add a new contact, select Options > New contact. Fill in the fields you want, and select Done.RM-328_FCC-draft_en_1.fm Page 38 Tuesday, March 11, 2008 9:35 AM
39GalleryD R A F TTo set your device to show contacts in the device memory and in the SIM card in the list of contacts, select Options > Settings > Contacts to display, and mark Phone memory and SIM memory.To copy names and numbers from a SIM card to your device or vice versa, scroll to the contact (or mark the desired contacts), and select Options > Copy > Phone memory or SIM memory.To view information about the memory consumption of contacts, select Options > Contacts info.To view the list of fixed dialling numbers, select Options > SIM numbers > Fixed dial contacts. This setting is only shown if supported by your SIM card.When fixed dialling is activated, calls may be possible to the official emergency number programmed into your device.To assign default numbers and addresses to a contact, select it, and select Options > Defaults. Scroll to the desired default option, and select Assign.■Contact groupsTo create a contact group so that you can send text or e-mail messages to several recipients at the same time, select > Contacts. Scroll right, and select Options > New group. Enter a name for the group, and open the group. Select Options > Add members. Mark the contacts you want to add to the group, and select OK.■Add a ringing toneYou can set a ringing tone or a video ringing tone for each contact and group. To add a ringing tone to a contact, select > Contacts, and open the contact. Select Options > Ringing tone and the ringing tone. To add a ringing tone to a group, scroll right to the groups list, and scroll to a contact group. Select Options > Ringing tone and the ringing tone for the group. To remove the personal or group ringing tone, select Default tone as the ringing tone.8. Gallery■Main viewTo save and organise your images, videos, music tracks, sound clips, playlists, streaming links, .ram files, and presentations, select > Gallery.RM-328_FCC-draft_en_1.fm Page 39 Tuesday, March 11, 2008 9:35 AM
40GalleryD R A F TTo copy or move files to device memory or to the memory card, select the folder (such as Images), scroll to the file (or press # to mark more files), and select Options > Organise and the memory to where you want to copy or move the files.To create new image and video folders, select Images or Video clips > Options > Organise > New folder and the memory. Enter a name for the folder. To move images and videos to a folder you created, mark the files, and select Options > Organise > Move to folder and the folder.To set an image as the wallpaper or to be shown during a call, select Images, and scroll to the image. Select Options > Use image > Set as wallpaper or Set as call image. To assign the image to a contact, select Assign to contact.To set a video as a video ringing tone, select Video clips, and scroll to the video. Select Options > Use video > As ringing tone. To assign the video for a contact, select Assign to contact.■Download filesTo download images or videos, select > Gallery > Images or Video clips and the image icon (Dwnl. imgs.) or the video icon (Downld. videos). The browser opens. Choose a bookmark for the site to download from.■Edit imagesTo edit images in Gallery, scroll to the image, and select Options > Edit.Shortcuts in the image editor:• To view an image in the full screen, and to return to the normal view, press *.• To rotate an image clockwise or counterclockwise, press 3 or 1.• To zoom in or out, press 5 or 0.• To move on a zoomed image, scroll up, down, left, or right.To crop or rotate the image; adjust the brightness, colour, contrast, and resolution; and add effects, text, clip art, or a frame to the picture, select Options > Apply effect.■Edit video clipsTo edit videos in Gallery and create custom video clips, scroll to a video clip, and select Options > Video editor > Options > Edit video clip.In the video editor you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video are shown on the video clip timeline. To switch between the timelines, scroll up or down.RM-328_FCC-draft_en_1.fm Page 40 Tuesday, March 11, 2008 9:35 AM
41GalleryD R A F T■Watch images and video clips on TVTo watch images and video clips on a compatible TV, use a compatible video-out cable, and set the TV-out settings for the applicable TV system and TV aspect ratio. Select > Settings > Phone sett. > General > Enhancement. To improve the image quality of the TV screen, select Flicker filter > On.1. To watch images and video clips on TV, first connect the video-out cable to the video input of a compatible TV.2. Connect the other end of the video-out cable to the Nokia AV Connector of your device.3. Select > Gallery > Images or Video clips and the file you want to view.■Print imagesYou can use the device with a PictBridge-compatible printer using USB cable.To print images in Gallery, scroll to the image, and select Options > Print.■Print onlineWith Print online, you can contact print online service providers to order prints of your images online and have them sent directly to your home or to a store where you can pick them up. Contact your print online service provider for the costs, applicable terms and available products.To use Print online, you must have at least one printing service configuration file installed. The files can be obtained from printing service providers that support Print online.Order printsYou can only order prints of images that are in .jpeg format.1. Select > Gallery > Images.2. To mark the images you want to order, press #, and select Options > Order prints.3. Select a service provider from the list, and select Options > Open. To view the details of the previous orders, select Log.RM-328_FCC-draft_en_1.fm Page 41 Tuesday, March 11, 2008 9:35 AM
42GalleryD R A F T4. If the service offered is a single shop service, you are connected to the service provider. Select Preview to view the image before ordering a print. To send your order, select Options > Order now.If the service offered is a retailer group service, you are connected to the service provider, and need to select a store from where you want to collect your prints. Depending on the service provider, you may have options for browsing and searching for stores with different search criteria.To check details, such as opening hours of the selected store, select Options > Info (if provided by the service provider).Select the desired retail pick up point. To send your order, select Options > Order now.■Share onlineWith the Share online application, you can share the images and video clips you have captured in compatible online albums, weblogs, or other compatible online sharing services on the web. You can upload content, save unfinished posts as drafts and continue later, and view the content of the albums. The supported content types may vary depending on the online sharing service provider.To share images and videos online, you must have an account with an online image sharing service. You can usually subscribe to such a service on the web page of your service provider. Contact your service provider for more information and applicable terms and costs.Select > Internet > Share online. To update the list of service providers, select Options > Add new account > Update services. Some online sharing service providers may allow you to add an account using your device. See ‘Share online settings,’ p. 43.Upload filesTo upload files, select > Gallery > Images or Video clips. Mark the files to upload, and Options > Send > Post to web and a sharing service.When you select the service, the selected images and videos are shown in the edit state. You can open and view the files, reorganise them, add text to them, or add new files.To cancel the web upload process and save the created post as a draft, select Cancel > Save as draft.RM-328_FCC-draft_en_1.fm Page 42 Tuesday, March 11, 2008 9:35 AM
43CameraD R A F TTo connect to the service and upload the files to the web, select Options > Post to web.Open online serviceTo view uploaded images and videos in the online service and draft and sent entries in your device, select > Internet > Share online. To update a service, scroll to it, and select Options > Update service.Select Options and from the following:Go to ... webs. — to connect to the service and view the uploaded and draft albums in the web browser. The view may vary depending on the service provider.Outbox — to view and edit the draft entries and upload them to the webNew post — to create a new entryThe available options may vary depending on the service provider.Share online settingsTo edit the share online settings, select > Internet > Share online > Options > Settings and from the following:Service providers — to view the list of service providersMy accounts — To create a new account, select Options > Add new account. To edit an existing account, select an account and Options > Edit. You can enter the name for the account and the user name and password for your account.Application settings — to select the size for the images shown on the display and the font size used in drafts or text entriesAdvanced — to select the default access point and the way for polling new content from the server, to enable content to be downloaded while roaming and all image data to be published.9. CameraYour device has two cameras to capture still images and record videos. A high resolution main camera is on the back of the device using landscape mode, and a lower resolution secondary camera is on the front of the device using portrait mode.Your device supports an image capture resolution of 2592x1944 pixels using the main camera. The image resolution in this guide may appear different.RM-328_FCC-draft_en_1.fm Page 43 Tuesday, March 11, 2008 9:35 AM
44CameraD R A F TYou can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity. You can also upload them to a compatible online album. See ‘Share online,’ p. 42.■Capture imagesMain camera1. To activate the main camera, open the lens cover. indicates still image mode.2. To zoom in or out, press the volume keys.To make lighting and colour adjustments before taking a picture, select from the active toolbar settings. See ‘Active toolbar,’ p. 44 and ‘Scenes,’ p. 46.You can lock the focus on an object by pressing the capture key halfway down. If the focus was not locked, the red focus indicator appears. Release the capture key, and press it halfway down again.3. To take a picture, press the camera key.4. To close the main camera, close the lens cover.Secondary camera1. To activate the secondary camera in the standby mode, keep the lens cover closed, and select > Applications > Camera. If you have the main camera activated, select Options > Use secondary camera.2. To zoom in or out, scroll up or down.3. To take a picture, press the scroll key.Active toolbarThe active toolbar provides you with shortcuts to different items and settings before and after capturing an image or recording a video. Scroll to icons, and select them by pressing the scroll key.If you want the active toolbar to be visible before and after capturing an image or recording a video, select Options > Show toolbar. To view the active toolbar only for 5 seconds when pressing the scroll key, select Options > Hide toolbar.In the active toolbar, select from the following:RM-328_FCC-draft_en_1.fm Page 44 Tuesday, March 11, 2008 9:35 AM
45CameraD R A F T Switch to video mode ( Switch to image mode) — to switch between the video and image modes Scene modes — to select the scene Flash mode — to select the flash mode (images only)Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. Self timer — to activate the self-timer (main camera only). Select the self-timer delay, and to activate the self-timer, select Activate. Sequence mode — to activate the sequence mode (images only). See ‘Capture images in sequence,’ p. 46.To customise the toolbar, select Options > Customise toolbar. You can remove an item from the toolbar, or change, add, or move items.The available options vary depending on the capture mode and view you are in.The setup settings return to the default settings when you close the camera.If you select a new scene, the colour and lighting settings are replaced by the selected scene. See ‘Scenes,’ p. 46. You can change the setup settings after selecting a scene if needed.Location informationWith geotagging, you can add information about the geographic location where the image was captured to the file details of the photograph. You can use this information in other applications. For example, in Nokia Maps you can see what photographs of different locations are available on a map.To activate geotagging in the camera, select Options > Settings > Record location > On.When the location information is added to the image information, is shown at the bottom of the display. If no positioning information is available from satellites, is displayed.If the location information is not available, GPS stays on in the background for a few minutes. If a satellite connection is found within that time, all the images captured during that time are tagged based on the received GPS positioning information. See ‘Still image camera settings,’ p. 48.RM-328_FCC-draft_en_1.fm Page 45 Tuesday, March 11, 2008 9:35 AM
46CameraD R A F TAfter capturing an imageAfter you capture an image, select the following from the active toolbar (available only if Show captured image is set to On in still image camera settings):• To send the image, press the call key, or select Send ().• To send the image to a compatible online album, select Sign in for Share online ()• If you do not want to keep the image, select Delete ().• To use the image as wallpaper in the standby mode, select Options > Set as wallpaper.• To set the image as a call image for a contact, select Options > Set as contact call img..Capture images in sequenceYou can set the main camera to capture six images or more in a sequence. In the active toolbar, select Sequence mode > Burst. To capture images, press the camera key. To capture more than six images, press and hold the camera key. The number of images captured depends on the available memory.To use a time interval between capturing images, select Sequence mode and a time interval. To start capturing images, press the camera key. To stop capturing images before the time ends, press the camera key again.After you have captured the images, they are shown in a grid on the display. To view an image, press the scroll key to open it.You can also use the sequence mode to capture up to six images using the self-timer.To return to the sequence mode viewfinder, press the camera key.To switch off the sequence mode, in the active toolbar, select Sequence mode > Single shot.ScenesA scene helps you to find the right colour and lighting settings for the environment. The settings of each scene have been set according to a certain style or environment. Scenes are only available in the main camera.Select the image or video mode, and in the active toolbar, select Scene modes and a scene available for the image or video mode.RM-328_FCC-draft_en_1.fm Page 46 Tuesday, March 11, 2008 9:35 AM
47CameraD R A F TTo make your own scene suitable for a certain environment, scroll to User defined, and select Options > Change. To copy the settings of another scene, select Based on scene mode and the desired scene.■Record videos1. To activate the main camera, open the lens cover. If the camera is in the image mode, change to video mode. In active toolbar, select Switch to video mode. indicates video mode.To activate the secondary camera, select Options > Use secondary camera.2. Press the camera key to start recording. With the secondary camera, press the scroll key for recording. is shown and a tone sounds, indicating that recording has started.To zoom in or out of the subject using the main camera, press the volume keys, or, using the secondary camera, scroll down or up.3. To stop recording, select Stop. The video clip is automatically saved to the Video clips folder in the Gallery. See ‘Gallery,’ p. 39. The maximum length of the video clip depends on the available memory.To pause recording at any time, select Pause. Video recording automatically stops if recording is set to pause and there are no keypresses within a minute. Select Continue to resume recording.To make lighting and colour adjustments before recording a video, select from the active toolbar settings. See ‘Active toolbar,’ p. 44 and ‘Scenes,’ p. 46.After recording a videoAfter you record a video clip, select the following from the active toolbar (available only if Show captured video is set to On. See ‘Video settings,’ p. 48).• To immediately play the video clip you just recorded, select Play .• To send the video clip using a multimedia message, e-mail, or Bluetooth connectivity, press the call key, or select Send ( ). You may not be able to send video clips saved in the .mp4 file format in a multimedia message.• To upload the video clip to a compatible online album, select Sign in for Share online ().• If you do not want to keep the video, select Delete ().RM-328_FCC-draft_en_1.fm Page 47 Tuesday, March 11, 2008 9:35 AM
48CameraD R A F T■Camera settingsThere are two kinds of settings for the still image camera: active toolbar settings and main settings. To use active toolbar settings, see ‘Active toolbar,’ p. 44. The active toolbar settings return to the default settings after you close the camera, but the main settings remain the same until you change them again.Still image camera settingsTo change the main settings, select Options > Settings.To set the image resolution (only available in the main camera), select Image quality. The better the image quality, the more memory the image consumes. To print the image, select Print 5M - Large, Print 3M - Medium, or Print 2M - Medium. To send it through e-mail, select E-mail 0.8M - Med.. To send the image through multimedia messaging (MMS), select MMS 0.3M - Small.To select whether to see the captured image after it is captured or to continue capturing images immediately, select Show captured image.To add GPS location coordinates to each image file, select Record location > On. Receiving a GPS signal may take time or the signal may not be available.To allow the zoom increments to be smooth and continuous between digital and extended digital zoom, select Extended digital zoom > On (continuous) (main camera only). To allow the zoom increments to pause at the digital and extended digital step point, select On (paused). To limit the zoom to where the selected image quality is maintained, select Off.To return the default values to the camera settings, select Restore camera settings.Video settingsTo change the main setting in video mode, select Options > Settings.To set the quality of the video clip, select Video quality. Select Sharing if you want to send the video clip using a multimedia message.To add GPS location coordinates to the video clip, select Record location > On. Receiving a GPS signal may take time or the signal may not be available.To reduce the effect of the camera shaking when recording a video, select Video stabilisation > On.To mute sound recording, select Audio recording > Mute.RM-328_FCC-draft_en_1.fm Page 48 Tuesday, March 11, 2008 9:35 AM
49MediaD R A F TTo view the first frame of the recorded video clip after the recording stops, select Show captured video. To view the video clip from the active toolbar, select Play (main camera) or Options > Play (secondary camera).To apply the default values to the camera settings, select Restore camera settings.10. Media■Music playerWarning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can listen to music and podcast episodes also when the offline profile is activated. See ‘Offline profile,’ p. 13.For more information about copyright protection, see ‘Licences,’ p. 67.Listen to music or a podcast episode1. Select > Music player > Music or Podcasts.2. Select the category, such as All songs or Podcasts > All episodes, and a song or a podcast episode to listen to.3. To play the selected file, press the scroll key.To pause, press the scroll key; to resume the playback, press the scroll key again.4. To stop the playback, scroll down.To fast forward or rewind, press and hold the scroll key right or left.To skip forward, scroll right. To return to the beginning of the song or podcast, scroll left.To skip to the previous song or podcast, scroll left again within 2 seconds after a song or podcast has started.To adjust the volume, use the volume key.To return to the standby mode and leave the player in the background, press the end key. Depending on the selected standby theme, the currently playing song is displayed. To return to the music player, select the currently playing song.RM-328_FCC-draft_en_1.fm Page 49 Tuesday, March 11, 2008 9:35 AM
50MediaD R A F TMusic menuSelect > Music player > Music. The music menu shows the available music. To view all songs, sorted songs, or playlists, select the desired list in the music menu.PlaylistsSelect > Music player > Music > Playlists. To view details of the playlist, select Options > Playlist details.Create a playlist1. Select Options > Create playlist.2. Enter a name for the playlist, and select OK. 3. To add songs now, select Yes. To add songs later, select No.4. Select artists to find the songs you want to include in the playlist. To add a song, press the scroll key.5. When you have made your selections, select Done. If a compatible memory card is inserted, the playlist is saved to the memory card.To add more songs later, when viewing the playlist, select Options > Add songs.PodcastTo view all the podcast episodes available in your device, select > Music player > Podcasts > All episodes.The podcast episodes have three states; never played, partially played, and completely played. If an episode is partially played, it plays from the last playback position the next time it is played. Otherwise, it is played from the beginning.Nokia Music StoreIn the Nokia Music Store (network service) you can search, browse, and purchase music for downloading to your device. To purchase music, you first need to register for the service. To check the Nokia Music Store availability in your country, visit www.music.nokia.com.To access the Nokia Music Store, you must have a valid internet access point in your device. To open Nokia Music Store, select > Music player > Options > Go to Music shop.Transfer musicYou can buy music protected with WMDRM from online music shops and transfer the music to your device.RM-328_FCC-draft_en_1.fm Page 50 Tuesday, March 11, 2008 9:35 AM
51MediaD R A F TTo refresh the library after you have updated the song selection in your device, select > Music player > Music > Options > Refresh Music library.Transfer music from PCTo synchronise music with Windows Media Player, connect the compatible USB cable and select Media transfer as the connection mode. You can transfer WMDRM protected music files only using media transfer. A compatible memory card needs to be inserted in the device.To use Nokia Music Manager in Nokia PC Suite, see the Nokia PC Suite user guide.■Nokia PodcastingWith the Nokia Podcasting application (network service), you can search, discover, subscribe to, and download podcasts over the air, and play, manage, and share audio podcasts with your device.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.SettingsTo use Nokia Podcasting, you must set your connection and download settings.Contact your service provider for information about the connection settings and data transmission charges. Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider’s network.Select > Music player > Podcasts > Options > Go to Podcasting > Options > Settings and from the following:Connection > Default access point — to select the access point to define your connection to the internet. To define the podcast search service for searches, select Search service URL.Download — to edit the download settings. You can select whether to save your podcasts to the device or the memory card; set how often podcasts are updated and set the time and date for the next automatic update; and set how much memory space to use for podcasts, and what to do if the downloads exceed the download limit.Setting the application to retrieve podcasts automatically may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.RM-328_FCC-draft_en_1.fm Page 51 Tuesday, March 11, 2008 9:35 AM
52MediaD R A F TSearchTo set the search engine to use the podcast search service, select > Music player > Podcasts > Options > Go to Podcasting > Options > Settings > Connection > Search service URL.To search for podcasts, select > Music player > Podcasts > Options > Go to Podcasting > Search, and enter a keyword or a title.To subscribe to a channel and add it to your podcasts, select Options > Subscribe. You can also mark channels to add them all at the same time.DirectoriesDirectories help you to find new podcast episodes to which to subscribe. An episode is a particular media file of a podcast.Select > Music player > Podcasts > Options > Go to Podcasting > Directories. Select a directory folder to update it (network service). When the colour of the folder icon changes, select to open it, and select a folder topic to view the list of podcasts.To subscribe to a podcast, select the title. After you have subscribed to episodes of a podcast, you can download, manage, and play them in the podcasts menu.To add a new directory or folder, select Options > New > Web directory or Folder. Select a title, URL of the .opml (outline processor markup language) file, and Done.To import an .opml file saved on your device, select Options > Import OPML file. Select the location of the file, and import it.When you receive a message with an .opml file using Bluetooth connectivity, open the file and save it to the Received folder in directories. Open the folder to subscribe to any of the links to add to your podcasts.DownloadsTo see the podcasts you have subscribed to, select > Music player > Podcasts > Options > Go to Podcasting > Podcasts. To see individual episode titles, select the podcast title.To start a download, select the episode title. To download or to continue to download selected or marked episodes, select Options > Download or Continue download. You can download multiple episodes at the same time.To play a portion of a podcast during download or after partial downloading, select Podcasts > Options > Play preview.RM-328_FCC-draft_en_1.fm Page 52 Tuesday, March 11, 2008 9:35 AM
53MediaD R A F TFully downloaded podcasts are saved in the Podcasts folder when the music library is refreshed.Play and manage podcastsTo display the episodes from a podcast, open the podcast. Under each episode, you see the file information.To play a fully downloaded episode, select > Music player > Podcasts.To update the selected podcast or marked podcasts, for a new episode, select Options > Update.To add a new podcast by entering the URL of the podcast, select Options > New podcast. To edit the URL of a selected podcast, select Edit.To update, delete, and send a group of selected podcasts at once, select Options > Mark/Unmark, mark the podcasts, and select Options and the desired action.To open the website of the podcast (network service), select Options > Open web page.Some podcasts provide the opportunity to interact with the creators by commenting and voting. To connect to the internet to do this, select Options > View comments.■FM RadioTo open the radio, select > Applications > Radio. To turn the radio off, select Exit.To check availability and costs of the visual service and station directory services, contact your service provider.The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Tune and save a radio stationTo start the station search when the radio is on, scroll up or down. To save the station when a station is found, select Options > Save station. Select a location for the station, enter the name for it, and select OK.RM-328_FCC-draft_en_1.fm Page 53 Tuesday, March 11, 2008 9:35 AM
54MediaD R A F TTo view the list of saved stations, select Options > Stations. To change the settings of a station, select the station and Edit.Radio functionsTo adjust the volume, press the volume keys.If there are any saved stations, scroll right or left to the next or previous stations.You can make or answer a call while listening to the radio. The radio is muted when there is an active call.To listen to the radio in the background and go to the standby mode, select Options > Play in background.View visual contentTo check availability and costs, and to subscribe to the service, contact your service provider.To view visual content of the current station, select Options > Start visual service. Station needs to have visual service ID saved before service can be used.To end the visual content feed but continue listening to the radio, select Close.Station directoryTo access the station directory (network service), select Options > Station directory and your location. Radio stations that provide visual content are indicated with . To listen to or save a station, scroll to it, and select Options > Listen or Save.■RealPlayerWith RealPlayer, you can play media files such as video clips saved in the device memory or memory card, or stream media files over the air by opening a streaming link. RealPlayer does not support all file formats or all the variations of file formats.Select > Applications > RealPlayer. To play, select Video clips, Streaming links, or Recently played and a media file or a streaming link.To stream live content, you must first configure your default access point. Select > Applications > RealPlayer > Options > Settings > Streaming > Network. Contact your service provider for more information.Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.RM-328_FCC-draft_en_1.fm Page 54 Tuesday, March 11, 2008 9:35 AM
55InternetD R A F T■Flash PlayerTo view, play, and interact with flash files made for mobile devices, select > Applications > Flash Player. To open a folder or play a flash file, select it.■RecorderWith voice recorder, you can record voice call conversations and voice memos. If you record a phone conversation, all parties hear a beeping sound during recording.Select > Applications > Recorder. To record a sound clip, select Options > Record sound clip, or select . To listen to the recording, select . Recorded files are saved in the Sound clips folder in Gallery.11 . I nt e r n et■Browse the webTo browse web pages, select > Internet > Web, or press and hold 0 in the standby mode.Check the availability of services, pricing, and tariffs with your service provider.Important: Use only services that you trust and that offer adequate security and protection against harmful software.To access web pages, do one of the following:• Select a bookmark from the bookmarks view.• In the bookmarks view, enter the address of the web page, and select Go to.BookmarksYour device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content.To add a bookmark manually, in the bookmarks view, select Options > Bookmark manager > Add bookmark, fill in the fields, and select Options > Save.Connection securityIf the security indicator is displayed during a connection, the data transmission between the device and the internet gateway or server is encrypted.RM-328_FCC-draft_en_1.fm Page 55 Tuesday, March 11, 2008 9:35 AM
56InternetD R A F TThe security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.To view details about the connection, encryption status, and information about server authentication, select Options > Tools > Page info.Keys and commands for browsingTo open a link, make selections, or check boxes, press the scroll key.To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view a chronological list of the pages visited during a browsing session. To choose the desired page, scroll left or right, and select it. The history list is cleared each time a session is closed.To save a bookmark while browsing, select Options > Save as bookmark.To retrieve the latest content from the server, select Options > Navigation options > Reload.To open the browser toolbar, scroll to an empty part of the page, and press and hold the scroll key.To end the connection and view the browser page offline, select Options > Tools > Disconnect. To stop browsing, select Options > Exit.Keypad shortcuts while browsing1 — Open your bookmarks.2 — Search for keywords in the current page.3 — Return to the previous page.5 — List all open windows.8 — Show the page overview of the current page. Press 8 again to zoom in and view the desired section of the page.9 — Enter a new web address.0 — Go to the start page.* or # — Zoom the page in or out.Mini mapMini map helps you navigate web pages that contain large amount of information. When Mini map is on in browser settings and you scroll through a large web page, Mini map opens and displays an overview of the web page you are RM-328_FCC-draft_en_1.fm Page 56 Tuesday, March 11, 2008 9:35 AM
57InternetD R A F Tbrowsing. To move in Mini map, scroll. When you stop scrolling, Mini map disappears and the area outlined in Mini map is displayed.Page overviewWith Page overview, you can move more quickly to the desired part of a web page. Page overview may not be available on all pages.To show the page overview of the current page, press 8. To find the desired spot on the page, scroll up or down. Press 8 again to zoom in and view the desired section of the page.Web feedsWeb feeds are widely used to share the latest headlines or recent news.The browser automatically detects if a web page contains web feeds. To subscribe to a web feed, select Options > Subscribe to web feeds and a feed, or click on the link. To view the web feeds you have subscribed to, in the bookmarks view, select Web feeds.To update a web feed, select it, and Options > Refresh.To define how the web feeds are updated, select Options > Settings > Web feeds.WidgetsYour device supports widgets. Widgets are small, downloadable web applications that deliver multimedia, news feeds, and other information, such as weather reports, to your device. Installed widgets appear as separate applications in the Applications > My own folder.You can download widgets using the Download! application or from the web.The default access point for widgets is the same as in the web browser. When active in the background, some widgets may update information automatically to your device.Using widgets may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.Saved pagesTo save a page while browsing to be able to view it offline, select Options > Tools > Save page. To view saved pages, in the bookmarks view, select Saved pages. To open a page, select it.RM-328_FCC-draft_en_1.fm Page 57 Tuesday, March 11, 2008 9:35 AM
58PersonalisationD R A F TClear privacy dataA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Clear privacy data > Cache.To clear all privacy data, select Options > Clear privacy data > All.■SearchUse Search to get access to search engines, and find and connect to local services, websites, images, and mobile content (network service). For example, you can use the application to find local restaurants and shops. You can also search for data in your device and memory card.Select > Internet > Search.12. Personalisation■ThemesTo change the look of your device display, activate a theme.Select > Settings > Personalis. > Themes. To see a list of the available themes, select General. The active theme is indicated by a check mark.To preview a theme, scroll to the theme, and select Options > Preview. To activate the previewed theme, select Set.In Themes, you can also set the menu view type, set a theme for the standby mode, set a custom wallpaper, personalise the look of the power saver, and select an image shown during a call.■ProfilesIn Profiles, you can adjust and personalise the device tones for different events, environments, or caller groups. You can see the selected profile at the top of the display in the standby mode. If the General profile is in use, only the current date is shown.Select > Settings > Profiles.To activate the profile, select the profile and Activate.Tip: To quickly change to silent profile from any other profile, in the standby mode, press and hold #.RM-328_FCC-draft_en_1.fm Page 58 Tuesday, March 11, 2008 9:35 AM
59Time managementD R A F TTo personalise a profile, select the profile, Personalise, and the desired settings.To set the profile to be active until a certain time within the next 24 hours, select Timed and the time.See also ‘Offline profile,’ p. 13.13. Time management■ClockSelect > Office > Clock. To change the clock settings, and to set the time and date, select Options > Settings.To set the device to show the time in other locations, scroll right to World clock. To add a location, select Options > Add location.To set your current location, scroll to a location, and select Options > Set as current location. The location is displayed in the clock main view, and the time in your device is changed according to the location selected. Check that the time is correct and matches your time zone.Alarm clockTo set a new alarm, scroll right to Alarms, and select Options > New alarm. Enter the alarm time, select whether and when the alarm is repeated, and select Done.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.■CalendarSelect > Office > Calendar. Press # in month, week, or day views to automatically high the current date.To add a new calendar entry, select Options > New entry and an entry type. Anniversary entries are repeated every year. To-do entries help you to keep a list of tasks that you need to do. Fill in the fields, and select Done.RM-328_FCC-draft_en_1.fm Page 59 Tuesday, March 11, 2008 9:35 AM
60Office applicationsD R A F T14. Office applications■Active notesActive notes allows you to create, edit, and view different kinds of notes. You can insert images and videos or sound clips in the notes, link notes to other applications, such as Contacts, and send notes to others.Select > Office > Active notes.To create a note, start writing. To insert images, sound or video clips, business cards, web bookmarks, or files, select Options > Insert object and the type of item.To set the device to show a note when making or receiving a call from a contact, select Options > Settings. To link a note to a contact, select Options > Link note to call > Add contacts and the contact.■CalculatorSelect > Office > Calculator. When entering numbers, to add a decimal point, press #.Note: This calculator has limited accuracy and is designed for simple calculations.■ConverterSelect > Office > Converter. You can convert measurements such as length from one unit to another, for example, yards to metres.The converter has limited accuracy and rounding errors may occur.Before you can convert currency, you need to choose a base currency (usually your domestic currency) and add exchange rates. The rate of the base currency is always 1. Select Currency as the measurement type, and select Options > Currency rates. To change the base currency, scroll to the currency, and select Options > Set as base currency. To add exchange rates, scroll to the currency, and enter a new rate.After you insert all the required exchange rates, you can convert currency. In the first amount field, enter the value to be converted. The other amount field changes automatically.Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared.RM-328_FCC-draft_en_1.fm Page 60 Tuesday, March 11, 2008 9:35 AM
61Office applicationsD R A F T■Mobile dictionaryUse Dictionary to translate words from one language to another.Select > Office > Dictionary. English is available by default in your device. You can add two more languages. To add a language, select Options > Languages > Download languages. You can remove languages except English and add new ones. The languages are free of charge, but downloading may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.The display shows abbreviations for source and target languages. To change the source and target language, select Options > Languages > Source and Target.Enter the word to be translated, and select Translate. To hear the word spoken, select Listen.■Adobe ReaderUse Adobe Reader to view portable document format (.pdf) documents. To open the application, select > Office > Adobe PDF.Open a .pdf fileTo open a recently viewed document, select it. To open a document that is not listed in the main view, select Options > Browse for file, the memory and folder where the file is stored and the file.View a documentTo move around within a page, scroll. To move to the next page, scroll down at the bottom of the page.To zoom in or out, select Options > Zoom > In or Out.To find text, select Options > Find > Text, and enter the text you want to find. To find the next occurrence, select Options > Find > Next.To save a copy of the document, select Options > Save.SettingsSelect Options > Settings and from the following:Default zoom % — to set the default zoom when opening a .pdf file for viewingView mode > Full screen — to open documents in full screen modeSave settings on exit > Yes — to save the settings as default when you exit Adobe ReaderRM-328_FCC-draft_en_1.fm Page 61 Tuesday, March 11, 2008 9:35 AM
62SettingsD R A F T■QuickofficeTo use the Quickoffice applications, select > Office > Quickoffice.To view a list of Word, Excel, and PowerPoint documents, scroll right or left to the Quickword, Quicksheet, or Quickpoint view. For example, available Microsoft Word documents are listed in the Quickword view. Not all variations or features of Word, Excel, and PowerPoint file formats are supported.To open a file in its respective application, select it.If you experience problems with the Quickoffice applications, visit www.quickoffice.com, or send an e-mail to supportS60@quickoffice.com.QuickmanagerWith Quickmanager, you can download software, including updates, upgrades, and other useful applications. You can pay for the downloads in your phone bill or using a credit card.15. Settings■Voice commandsTo select the functions to use by voice command, select > Settings > Voice comm.. The voice commands for changing profiles are in the Profiles folder.To change the voice command for an application, select Options > Change command and the application. To play the activated voice command, select Options > Playback.To use voice commands, see ‘Voice dialling,’ p. 19.■Phone settingsGeneralSelect > Settings > Phone sett. > General and from the following:Personalisation — to adjust the display, standby mode, tones (such as ringing tone), language, themes, and voice command settingsDate and time — to set the time and date and the display formatEnhancement — to change the settings for an enhancement. Select an enhancement and the desired setting.My own key — to change a shortcut for the my own key. See ‘Standby mode,’ p. 13.RM-328_FCC-draft_en_1.fm Page 62 Tuesday, March 11, 2008 9:35 AM
63SettingsD R A F TSecurity — to change the device and SIM card settings, such as PIN and lock codes; view certificate details and check authenticity; and view and edit security modulesWhen security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing), calls may be possible to the official emergency number programmed into your device.Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is shown, even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.Factory settings — to reset some of the settings to their original values. You need the lock code.Positioning (network service) — to change positioning settings. See ‘Positioning settings,’ p. 25.PhoneSee ‘Call settings,’ p. 21.ConnectionSelect > Settings > Phone sett. > Connection and from the following:Bluetooth — to switch Bluetooth technology on or off, and edit Bluetooth settings. See ‘Bluetooth connection settings,’ p. 70.USB — to edit USB settings. See ‘USB connection,’ p. 71.Destinations — to define the connection methods used for reaching a particular destinationPacket data — to select the packet data connection settings. The packet data settings affect all access points using a packet data connection.• To set the device to register to the packet data network when you are in a network that supports packet data, select Packet data connection > When available. If you select When needed, the device uses a packet data connection only if you start an application or function that needs it.RM-328_FCC-draft_en_1.fm Page 63 Tuesday, March 11, 2008 9:35 AM
64SettingsD R A F T• To set the access point name to use your device as a modem with your computer, select Access point.• To enable the use of HSDPA (network service) in UMTS networks, select High speed packet access. When HSDPA support is activated, downloading data such as messages, e-mail, and browser pages through the cellular network may be faster.Data call — to set the online time for the data call connection. The data call settings affect all access points that use a GSM data call.Video sharing — to set your SIP profile settings manually. See ‘Video sharing settings,’ p. 23.Presence (network service) — to view and edit the presence settings. Connection applications, such as push to talk, use the presence settings. You may receive the settings from your service provider.SIP settings — to view and edit session initiation protocol (SIP) profiles. See ‘Video sharing,’ p. 23.XDM porfile — to create or edit an XDM profile. Settings are for communication applications, such as presence and push to talk. These enable the service provider to access some user information that is saved in the network servers but managed by the user, for example push to talk groups. You may receive the settings from your service provider. See ‘Configuration settings,’ p. 11.Configurations — to view and delete configuration contexts. Certain functions, such as web browsing and multimedia messaging, may require configuration settings. You may receive the settings from your service provider. See ‘Configuration settings,’ p. 11.APN control — to restrict the use of packet data access points. This setting is only available if your SIM card supports the service. To change the settings, you need the PIN2 code.ApplicationsTo view and edit settings of applications installed to your device, select > Settings > Phone sett. > Applications.■SpeechIn Speech, you can select the default language and voice used for reading text messages and adjust the voice properties, such as rate and volume. Select > Settings > Speech.RM-328_FCC-draft_en_1.fm Page 64 Tuesday, March 11, 2008 9:35 AM
65Data managementD R A F TTo view details of a voice, scroll right, scroll to the voice, and select Options > Voice details. To test a voice, scroll to the voice, and select Options > Play voice.16. Data management■Install or remove applicationsYou can install two types of applications to your device:•J2METM applications based on JavaTM technology with the extension .jad or .jar. PersonalJavaTM applications cannot be installed on your device.• Other applications and software suitable for the Symbian operating system. The installation files have the .sis or .sisx extension. Only install software specifically designed for your device.Important: Only install and use applications and other software from trusted sources, such as applications that are Symbian Signed or have passed the Java VerifiedTM testing.Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment or by using Bluetooth technology. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device or a memory card.To find installed applications, select > Applications > My own.To open Application manager, select > Settings > Data mgr. > App. mgr..Install an applicationThe .jar file is required for installing Java applications. If it is missing, the device may ask you to download it.1. To install an application or software package, select Installation files, and scroll to an installation file. Applications on the memory card are indicated with .2. Select Options > Install.Alternatively, search the device memory or the memory card, select the application, and press the scroll key to start the installation.During the installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or RM-328_FCC-draft_en_1.fm Page 65 Tuesday, March 11, 2008 9:35 AM
66Data managementD R A F Tcertification, the device displays a warning. Continue installation only if you are sure of the origins and contents of the application.Java applications may attempt to, for example, establish a data connection or send a message. To edit the permissions of an installed Java application and define which access point the application will use, select Installed apps., scroll to the application, and select Open.After you install applications to a compatible memory card, installation files (.sis) remain in the device memory. The files may use large amounts of memory and prevent you from storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation files to a compatible PC, then use the file manager to remove the installation files from the device memory. See ‘File manager,’ p. 66. If the .sis file is a message attachment, delete the message from the Messaging inbox.Remove an applicationIn the Application manager main view, select Installed apps., scroll to the software package, and select Options > Uninstall.■File managerTo browse, open, and manage files and folders in the device memory or on a memory card, select > Settings > Data mgr. > File mgr..Back up and restore device memoryTo back up information from device memory to the memory card or restore information from the memory card, in File manager, select Options > Back up phone memory or Restore from mem. card. You can only back up the device memory and restore it to the same device.Format a memory cardWhen a memory card is formatted, all data on the card is permanently lost. Some memory cards are supplied preformatted and others require formatting.1. In the File manager view, select the memory card.2. Select Options > Memory card options > Format.3. When formatting is complete, enter a name for the memory card.Lock or unlock a memory cardTo set a password to help prevent unauthorised use, in the File manager view, select the memory card and Options > Memory card password > Set. Enter and confirm your password. The password can be up to eight characters long.RM-328_FCC-draft_en_1.fm Page 66 Tuesday, March 11, 2008 9:35 AM
67Data managementD R A F TIf you insert another password-protected memory card into your device, you are prompted to enter the password of the card. To unlock the card, select Options > Unlock memory card.■LicencesDigital rights managementContent owners may use different types of digital rights management (DRM) technologies to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with WMDRM, OMA DRM 1.0, and OMA DRM 2.0. If certain DRM software fails to protect the content, content owners may ask that such DRM software's ability to access new DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content.Digital rights management (DRM) protected content comes with an associated activation key that defines your rights to use the content.If your device has OMA DRM-protected content, to back up both the licences and the content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer the licences which need to be restored with the content for you to be able to continue the use of OMA DRM protected content after the device memory is formatted. You may also need to restore the licences in case the files on your device get corrupted.If your device has WMDRM protected content, both the licences and the content will be lost if the device memory is formatted. You may also lose the licences and the content if the files on your device get corrupted. Losing the licences or the content may limit your ability to use the same content on your device again. For more information, contact your service provider.Some licences may be connected to a specific SIM card, and the protected content can be accessed only if the SIM card is inserted in the device.To view the licences saved in your device, select > Settings > Data mgr. > Licences.To view valid licences that are connected to one or more media files, select Valid licences. Group licences, which contain several licences, are indicated with . To view the licences contained in the group licence, select the group licence.To view invalid licences for which the time period for using the file has exceeded, select Invalid licences. To buy more usage time or extend the usage period for a media file, select an invalid licence and Options > Get new licence. It may not be possible to update licences if service message reception is disabled.RM-328_FCC-draft_en_1.fm Page 67 Tuesday, March 11, 2008 9:35 AM
68Data managementD R A F TTo view licences that are not in use, select Not in use. Unused licenses have no media files connected to them.To view detailed information such as the validity status and the ability to send the file, scroll to a licence, and select it.■Device managerWith device manager you can connect to a server and receive configuration settings for your device, create new server profiles, or view and manage existing server profiles. You may receive configuration settings from your service provider or company information management department.To open the device manager, select > Settings > Data mgr. > Device mgr..Update softwareWarning: If you install a software update, you cannot use the device, even to make emergency calls, until the installation is completed and the device is restarted. Be sure to back up data before accepting installation of an update. Downloading software updates may involve the transmission of large amounts of data through your service provider's network. Contact your service provider for information about data transmission charges.Make sure that the device battery has enough power, or connect the charger before starting the update.1. Select Options > Check for updates. If an update is available, accept to download it.2. After a successful download, to install the update, select Now. To start the installation later, select Later.To start the installation process later, select Options > Install update.If no server profile has been defined, the device asks you to create one, or if there are several, to select from a list of servers. Contact your service provider for server profile settings.Configure your deviceYou may receive configuration settings from your service provider or company information management department.To connect to a server and receive configuration settings for your device, select Options > Server profiles, scroll to the server profile, and select Options > Start configuration.To edit a server profile, scroll to the profile, and select Options > Edit profile.RM-328_FCC-draft_en_1.fm Page 68 Tuesday, March 11, 2008 9:35 AM
69ConnectivityD R A F TContact your service provider or company information management department for the server profile settings.17. Connectivity■Data transferWith data transfer you can copy or synchronise contacts, calendar entries, and possibly other data, such as video clips and images, from a compatible device using a Bluetooth connection.Depending on the other device, synchronisation may not be possible and data can be copied only once.1. To transfer or synchronise data, select > Settings > Connectivity > Switch.If you have not used Switch before, information about the application is displayed. To start transferring data, select Continue.If you have used Switch, select the icon Start sync, Start retrieving or Start sending.2. When using Bluetooth technology, the devices need to be paired in order to transfer data.Depending on the type of the other device, an application may be sent and installed on the other device to enable the data transfer. Follow the instructions.3. Select what content you want to be transferred to your device.4. Content is transferred to your device. The transfer time depends on the amount of data. You can stop the transfer and continue later.■PC SuiteWith PC Suite you can synchronise contacts, calendar entries, and notes between your device and a compatible PC.You may find more information about PC Suite and the download link in the support area on the Nokia website, www.nokia.com/pcsuite.■Bluetooth connectivityBluetooth wireless technology enables wireless connections between electronic devices within a maximum range of 10 metres (33 feet).RM-328_FCC-draft_en_1.fm Page 69 Tuesday, March 11, 2008 9:35 AM
70ConnectivityD R A F TThis device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Advanced Audio Distribution, Audio/Video Remote Control, Basic Imaging, Device Identification, Dial-Up Networking, File Transfer, Hands-free, Headset, Object Push, Serial Port, SIM Access, Phone Book Access, Generic Audio/Video Distribution, Generic Access, and Generic Object Exchange. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.Do not accept Bluetooth connections from sources you do not trust.A Bluetooth connection is disconnected automatically after sending or receiving data.Bluetooth connection settingsSelect > Settings > Connectivity > Bluetooth.Bluetooth — to switch Bluetooth connectivity on or offMy phone's visibility > Shown to all — to allow your device to be found by other devices with Bluetooth connectivity at all times. To allow your device to be found for a defined time period, select Define period. For security reasons it is advisable to use the Hidden setting whenever possible.My phone's name — to define a name for your deviceRemote SIM mode > On — to enable another device, for example, a car kit, to use the SIM card of your device using Bluetooth technology (SIM access profile)When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the lock code to unlock it first.Send data1. Open the application where the item you want to send is saved.2. Scroll to the item you want to send, and select Options > Send > Via Bluetooth.RM-328_FCC-draft_en_1.fm Page 70 Tuesday, March 11, 2008 9:35 AM
71ConnectivityD R A F T3. The device starts to search for devices within range. Paired devices are shown with . Some devices may show only the unique device addresses. To find out the unique address of your device, enter the code *#2820# in the standby mode.If you have searched for devices earlier, a list of devices found previously is shown. To start a new search, select More devices.4. Select the device with which you want to connect.5. If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a passcode. Create your own passcode and share the passcode with the owner of the other device. You do not have to memorise the passcode.Pair and block devicesTo open a list of paired devices, in the Bluetooth view, scroll right to Paired devices.To pair with a device, select Options > New paired device, select the device with which to pair, and exchange passcodes.To cancel pairing, scroll to the device whose pairing you want to cancel, and press the clear key. If you want to cancel all pairings, select Options > Delete all.To set a device to be authorised, scroll to the device, and select Options > Set as authorised. Connections between your device and an authorised device can be made without your knowledge. Use this status only for your own devices to which others do not have access, for example, your PC or devices that belong to someone you trust. is added next to authorised devices in the paired devices view.To block connections from a device, in the paired devices view, select the device and Block.To view a list of blocked devices, scroll right to Blocked devices. To unblock a device, scroll to the device, and select Delete.Receive dataWhen you receive data using Bluetooth technology, you are asked if you want to accept the message. If you accept, the item is placed in inbox in Messaging.■USB connectionConnect the USB data cable to establish a data connection between the device and a compatible PC.RM-328_FCC-draft_en_1.fm Page 71 Tuesday, March 11, 2008 9:35 AM
72ConnectivityD R A F TSelect > Settings > Connectivity > USB and from the following:USB connection mode — to select the default USB connection mode or change the active mode. Select PC Suite to use the device with Nokia PC Suite; Mass storage to access files on the inserted memory card as a mass storage device; Image transfer to use the device with a PictBridge-compatible printer, or Media transfer to synchronise media files, such as music, with a compatible version of Windows Media Player.Ask on connection — to set the device to ask the purpose of the connection each time the cable is connected, select Yes. To set the default mode to be activated automatically, select No.After transferring data, ensure that it is safe to unplug the USB data cable from the PC.■Remote synchronisationSync enables you to synchronise data such as your calendar entries, contacts, and notes with a compatible computer or a remote internet server.Select > Settings > Connectivity > Sync.To create a new profile, select Options > New sync profile and enter the required settings.To synchronise data, in the main view, mark the data to be synchronised, and select Options > Synchronise.■Push to talkPush to talk (PTT, network service) is a real-time voice over IP service (network service). PTT provides direct voice communication connected with a single keypress. In PTT communication, one person talks while the others listen. The length of time of each turn is limited.To check availability and costs, and to subscribe to the service, contact your service provider. Note that roaming services may be more limited than home network services.Before you can use the PTT service, you must define the PTT connection settings. For PTT service settings, contact your service provider.Phone calls always take priority over PTT calls.Select > Applications > PTT.RM-328_FCC-draft_en_1.fm Page 72 Tuesday, March 11, 2008 9:35 AM
73ConnectivityD R A F TLog in to PTTTo log in manually, select Options > Log in to PTT. indicates a PTT connection. indicates that PTT is set to do not disturb (DND).Exit PTTSelect Options > Exit. Log out from PTT after exiting application? is displayed. To log out, select Yes. To keep PTT active in the background, select No.Make a one-to-one callWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. 1. Select Options > PTT contacts > Contacts, scroll to the contact you want to talk to, and press the call key.2. When the connection has been established, to talk to the other participant, press and hold the call key while you talk.3. To end the PTT call, select Disconnect, or, if there are several PTT calls, select Options > Disconnect.Make a PTT group callTo call a group, select Options > PTT contacts > Contacts > Options > Talk to many, mark the contacts you want to call, and select OK.PTT sessionsPTT sessions are displayed as call bubbles in the PTT display, giving information about the status of the PTT sessions:Wait — shown when you press and hold the call key and somebody else is still speaking in the PTT sessionTalk — shown when you press and hold the call key and get the permission to speakSend a callback requestTo send a callback request from Contacts, scroll to a contact, and select Options > Send callback request.RM-328_FCC-draft_en_1.fm Page 73 Tuesday, March 11, 2008 9:35 AM
74EnhancementsD R A F T■Connection managerIn the connection manager, you can identify the status of data connections, view details on the amount of data sent and received, and end unused connections.Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Select > Settings > Conn. mgr..To view connection details, scroll to a connection, and select Options > Details.To end a connection, scroll to the connection, and select Options > Disconnect. To end all connections, select Options > Disconnect all.18. EnhancementsWarning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.19. Battery and charger informationYour device is powered by a rechargeable battery. The battery intended for use with this device is BP-5M. This device is intended for use when supplied with power from the following chargers: AC-3, AC-4, AC-5 or DC-4 chargers and CA-44 charging adapter. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved battery or charger may present a risk of fire, explosition, leakage, or other hazard.If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made.Always switch the device off and disconnect the charger before removing the battery.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.RM-328_FCC-draft_en_1.fm Page 74 Tuesday, March 11, 2008 9:35 AM
75Battery and charger informationD R A F TAlways try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Battery performance is particularly limited in temperatures well below freezing.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative(-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of such a leak, flush your skin or eyes immediately with water, or seek medical help.Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids.Improper battery use may result in a fire, explosion, or other hazard. If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged, take it to a service centre for inspection before continuing to use it.Use the battery only for its intended purpose. Never use any charger or battery that is damaged. Keep your battery out of the reach of small children.Important: Battery talk and standby times are estimates only and depend on signal strength, network conditions, features used, battery age and condition, temperatures to which battery is exposed, use in digital mode, and many other factors. The amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time.■Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorised Nokia dealer, and inspect the hologram label using the following steps:Successful completion of the steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic, original Nokia battery, you should refrain from using it, and take it to the nearest authorised Nokia service point or dealer for assistance. Your authorised Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.RM-328_FCC-draft_en_1.fm Page 75 Tuesday, March 11, 2008 9:35 AM
76Care and maintenanceD R A F TAuthenticate hologram1. When you look at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram left, right, down and up, you should see 1, 2, 3 and 4 dots on each side respectively.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorised Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.RM-328_FCC-draft_en_1.fm Page 76 Tuesday, March 11, 2008 9:35 AM
77Additional safety informationD R A F T• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity sensor, and light sensor lenses.• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep, such as contacts and calendar notes.• To reset the device from time to time for optimum performance, power off the device and remove the battery.These suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorised service facility for service.DisposalThe crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. Do not dispose of these products as unsorted municipal waste. By returning the products to collection you help prevent uncontrolled waste disposal and promote the reuse of material resources. More detailed information is available from the product retailer, local waste authorities, national producer responsibility organizations, or your local Nokia representative. For the product Eco-Declaration or instructions for returning your obsolete product, go to country-specific information at www.nokia.com.Additional safety information■Small childrenYour device and its enhancements may contain small parts. Keep them out of the reach of small children.■Operating environmentThis device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a RM-328_FCC-draft_en_1.fm Page 77 Tuesday, March 11, 2008 9:35 AM
78Additional safety informationD R A F Tconnection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Implanted medical devicesManufacturers of medical devices recommend that a minimum separation of 15.3 centimeters (6 inches) should be maintained between a wireless device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential interference with the medical device. Persons who have such devices should:• Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device when the wireless device is turned on.• Not carry the wireless device in a breast pocket.• Hold the wireless device to the ear opposite the medical device to minimise the potential for interference.• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.• Read and follow the directions from the manufacturer of their implanted medical device.If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.Warning: For hearing aid compatibility, you must turn off the Bluetooth connectivity.Your mobile device model complies with FCC rules governing hearing aid compatibility. These rules require an M3 microphone or higher value. The M-value, shown on the device box , refers to lower radio frequency (RF) emissions. A higher M-value generally indicates that a device model has a lower RF emissions level, which may improve the likelihood that the device will operate with certain hearing aids. Some hearing aids are more immune than others to interference. Please consult your hearing health professional to determine the M-RM-328_FCC-draft_en_1.fm Page 78 Tuesday, March 11, 2008 9:35 AM
79Additional safety informationD R A F Trating of your hearing aid and whether your hearing aid will work with this device. More information on accessibility can be found at www.nokiaaccessibility.com.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or any equipment that has been added.Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities and areas where the air contains chemicals or particles such as grain, dust, or metal powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity.■Emergency callsImportant: This device operates using radio signals, wireless networks, landline networks, and user-programmed functions. If your device supports voice calls over the internet (internet calls), activate both the internet calls and the cellular phone. The device will attempt to make emergency calls over both the cellular networks and through your internet call provider if both are activated. Connections in all RM-328_FCC-draft_en_1.fm Page 79 Tuesday, March 11, 2008 9:35 AM
80Additional safety informationD R A F Tconditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also need to complete the following:• Insert a SIM card if your device uses one.• Remove certain call restrictions you have activated in your device.• Change your profile from offline or flight profile mode to an active profile.2. Press the end key as many times as needed to clear the display and ready the device for calls. 3. Enter the official emergency number for your present location. Emergency numbers vary by location.4. Press the call key.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.■Certification information (SAR)This mobile device meets guidelines for exposure to radio waves.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1.08 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com.Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is1.07 W/kg and when properly worn on the body is 0.61 W/kg.RM-328_FCC-draft_en_1.fm Page 80 Tuesday, March 11, 2008 9:35 AM
81D R A F TIndexAA-GPSassisted GPS 25alarm clock. See clock.Bbarring password 17Bluetoothconnection settings 70receiving data 71sending data 70bookmarks 55Ccache 58calendar 59call register. See log.callsanswering 20barring 22ending 19international 18making 18rejecting 20speed dial 19waiting 20cameracapturing images 44flash 45recording video 47scenes 46self-timer 45sequence mode 46still image camera settings 48video recorder settings 48charging battery 10clock 59conference call 20connection manager 74connectivity 69contacts 38memory consumption 39converter 60Ddata cable. See USBdata transfer 69device manager 68dictionary. See mobile dictionarydiverting calls 22Ee-mail messages 36Ffile manager 66Flash Player 55forwarding calls. See diverting callsGgallery 39GPSGPS connection 25maps 27positioning 25Hhelp 8IindicatorsGPS light 15icons 14status light 15Kkeyguard. See keypad lock.keypad lock 16Llistening to music 49lock code 10, 16log 24RM-328_FCC-draft_en_1.fm Page 81 Tuesday, March 11, 2008 9:35 AM
82D R A F TMmapsbrowsing maps 27media player. See RealPlayer.memory card. See microSD cardmenu 15messageslistening to 37service messages 35SIM messages 37microSD card 9mobile dictionary 61music playerdownloading music 50music shop 50playlists 50transferring music 50Nnotesactive notes 60Ooffline mode. See offline profileoffline profile 14one-touch dial. See speed dialling.operator selection 23Ppaired devices 71phonebook. See contacts.PIN 10, 16module PIN 17signing PIN 17positioning 25profiles 58PTT. See push to talk.PUK 17push to talk 72Rradio 53RealPlayerrecorder 55ringing tones 39video ringing tones 40Sscreen saver 15service commands 37settingsconnection 63data call 64messaging 38packet data 63phone 62Setting wizard 12speech 64writing language 33sharing online 42software updates 68speed dialling 19standby theme 13switch.See data transfer.synchronisation 72Ttext input 33themes 58transferring music 50Uupdating software 68UPIN 16USB 71using phone without a SIM card 14Vvideo call 21video sharing 23voice commands 62voice dialing 19voice mailbox 19voice recorder. See recorder.volume 16Wwebconnection security 55feeds 57saving a page 57viewing a saved page 57viewing bookmarks 55world clock. See clock.writing text. See text input.RM-328_FCC-draft_en_1.fm Page 82 Tuesday, March 11, 2008 9:35 AM

Navigation menu