Microsoft RM-339 Cellular/PCS CDMA phone with Bluetooth User Manual 11111
Microsoft Mobile Oy Cellular/PCS CDMA phone with Bluetooth 11111
Contents
- 1. Manual 1
- 2. Manual 2
- 3. Manual
Manual
ra ft RM-339 User Guide Copyright © 2008 Nokia. All rights reserved. Nokia, Mirage, Navi and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. cdma2000 is a registered certification mark of the Telecommunications Industry Association. Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Bluetooth is a registered trademark of Bluetooth SIG, Inc. ft Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. ra TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. PROVIDED THE CONTENTS OF THIS DOCUMENT ARE PROV IDED "AS IS". EXCEPT AS REQUIRED BY KIND,, EITHER EXPRESS OR IMPLIED, INCLUDING, APPLICABLE LAW, NO WARRANTIES OF ANY KIND BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A RELATION PARTICULAR PURPOSE, ARE MADE IN RELATI ON TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. The availability of particular products and app applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options. Export controls This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user’s authority to operate this equipment. The third-party applications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party applications. BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR AT THE APPLICATIONS WILL NOT INFRINGE ANY THIRDA PARTICULAR PURPOSE, OR THAT ADEMARKS, OR OTHER RIGHTS. PARTY PATENTS, COPYRIGHTS, TRADEMARKS, ra ft 9205283/Issue 1 Contents SAFETY.............................................. 6 Welcome ........................................... 8 Getting Help....................................................... 8 Get The Most Out Of This Guide................... 9 1. Phone at A Glance ..................... 10 Standby Mode................................................. Indicators and Icons...................................... Phone Menus .................................................. Navigate Menus ............................................. Directional Key ............................................... 11 12 13 13 13 2. Set Up Your Phone..................... 15 Text Messages ................................................. 30 Picture Messages............................................ 30 New Message .................................................. 31 Inbox .................................................................. 33 Sent Messages ................................................ 35 Draft Messages ............................................... 35 Message Settings ........................................... 35 Voicemail Messages ...................................... 36 Mobile Instant Messaging ........................... 37 E-mail Messages ............................................ 37 Chat.................................................................... 37 6. Contacts ..................................... 38 Create New Contacts .................................... 38 Contact List...................................................... 40 Groups ............................................................... 41 Speed Dials....................................................... 42 In Case of Emergency (ICE) ......................... 43 ra ft Antenna............................................................ 15 Change the Battery ....................................... 15 Charge the Battery........................................ 16 Wrist Strap ...................................................... 17 Replace the Camera Xpress-onTM Snap. 17 Replace the Back Camera Xpress-onTM Snap 18 Turn Your Phone On or Off ......................... 19 Connect the Headset .................................... 19 Make A Call ..................................................... 19 Answer Calls.................................................... 20 5. Messaging .................................. 30 3. Text Entry ................................... 23 Word Mode...................................................... Abc (Multi-tap) Mode .................................. 123 (number) Mode ...................................... Symbols Mode ................................................ 23 24 24 24 4. Media Center .............................. 25 Tunes & Tones................................................. Pictures............................................................. Games ............................................................... Mobile Web ..................................................... Browse & Download ..................................... Extras ................................................................ Info .................................................................... Incoming Calls................................................ Security and Functionality.......................... 25 26 27 27 27 27 27 28 28 7. E-mail Messages........................ 44 8. Mobile Instant Messaging......... 46 9. My Ringtones ............................. 46 10.Recent Calls .............................. 47 View Calls ......................................................... 47 View Call Timers ............................................. 47 11.VZ Navigator............................. 49 12.Settings & Tools ....................... 49 My Verizon ....................................................... 49 Tools................................................................... 49 Bluetooth Menu ............................................. 53 Sounds Settings.............................................. 55 Display Settings .............................................. 56 Phone Settings................................................ 57 Call Settings .................................................... 61 Memory............................................................. 63 Phone Information......................................... 63 Setup Assistant ............................................... 64 Activate and use Voice Commands .......... 65 Battery Information....................................... 68 Nokia Battery Authentication Guidelines 69 14.Enhancements........................... 67 Care and Maintenance .................. 71 15.Battery and Charger Information . 68 Additional Safety Information ..... 72 ra ft 13.Voice commands....................... 65 SAFETY Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. SWITCH OFF IN RESTRICTED AREAS QUALIFIED SERVICE ft Follow any restrictions. Switch the device device off in aircraft, near medical equipment, fuel, chemicals, s, or blasting areas. ra Only qualified personnel may install install or repair this product. ENHANCEMENTS AND BATTERIES Use only approved enhancements enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your device is not water-resistant. Keep it dry. ■ About Your Device The wireless device (RM-339) described in this guide is approved for use on the following Verizon Wireless networks: CDMA 800 and 1900 MHz, and CDMA2000 1xRTT. Contact Verizon Wireless for more information about networks. When using the features in this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred. Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access such sites, you should take precautions for security or content. Warning: To use any features in this device, the device must be turned on. Do not turn the device on when wireless device use may cause interference or danger. Remember to make back-up copies or keep a written record of all important information stored in your device. When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. ■ Network Services To use the device you must have service from a wireless service provider. Many of the features require special network features. These are not available on all networks; other networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language dependent characters and services. ft Your service provider may have requested that certain features be disabled or not activated in your device. If so, these features will not appear on your device menu. Your device may also have a special configuration such as changes changes in menu names, menu order, and icons. For more information, contact your service provider. ra This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as Media Center Center and e-mail messaging, require network support for these technologies. Welcome Congratulations on your purchase of this Nokia mobile device. Your device provides many practical functions for daily use, such as a hands-free speakerphone, alarm clock, calculator, calendar, camera and image and data downloads. Your device can also connect to other devices using Bluetooth wireless technology. To personalize your phone, you can set your favorite ringtones. ■ Getting Help Find your device label ra The MEID is found on the type label, which is located beneath the battery on the back of the phone. See "Remove the back cover", p. 15. ft If you need help, the Nokia Care Contact Center is available for assistance. Before calling, we recommend that you writee down the Mobile Equipment Identifier (MEID) and your zip code (only in the US), and have it available. Accessibility solutions Nokia is committed to making mobile devices easy to use for all individuals, including those with disa disabilities. For more information, visit the website at www.nokiaaccessibility.com. Nokia support and contact information Check www.nokiausa.com/support or your local Nokia website for the latest guides, additional information, downloads, and services related to your Nokia product. On the website, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care Contact Centers at www.nokia.com/customerservice. For maintenance services, check your nearest Nokia Care Contact Center location at www.nokia.com/repair. Billing and customer service To reach Verizon Wireless’ billing and customer service support, dial 1-800-2564646. ■ Get The Most Out Of This Guide The following sections illustrate the various components of your device. Familiarize yourself with these sections to help you understand the instructions that follow. This guide uses certain terms rms for the steps that you are asked to perform. • Press means to press and release a key quickly. For example, press 7 means press and release the key on the keypad that is labeled with the number 7. ft • Press and hold means to press and hold a key for 2–3 seconds, then release the key. ra • Scroll means pressing one end of the Directional Directional key briefly once. For example, scroll left means pressing the left end of the key. 1. Phone at A Glance 1. Earpiece 2. Display screen 3. Directional key 4. Right Soft key 5. Camera key 6. End/Power key 7. Alphanumeric keypad 8. Vibration key 9. Next key 11.Voicemail speed dial key 12.Clear key 14.Speakerphone key 16.OK key 15.Left Soft key ra 13.Send key ft 10.International Dialing key 10 1. Charging/Data port 2. Volume keys 3. Headset jack 4. Camera Xpress-onTM snap 5. Camera lens 6. Front display 7. Back cover Xpress-onTM snap 8. Microphone 9. Wrist Strap eyelet 10.Voice Command key ra ft 11.Speakerphone ■ Standby Mode The start screen is home base and indicat indicates that your phone is in Standby Mode. 1. Signal strength — The strength of the signal received by the phone is indicated by the number of bars displayed. 2. Message — Press the Left Soft key to select this option. 3. MENU — Press the OK key to select this option. 4. Contacts — Press the Right Soft key to select this option. 5. Battery strength — Four bars indicate a fully charged battery. 6. Location — Location information sharing mode. 11 ■ Indicators and Icons Depending on your phone settings and modes, some or all of the following indicators and icons may appear in Standby Mode. To view how to access the complete glossary, see "Phone Information", p. 65. Signal strength indicator. You are in a digital network. Signal strength indicator. You are in a 1xRTT network. Airplane mode is on. See "Airplane Mode", p. 59. You are roaming outside your home network. SSL security feature is on. Voice privacy is activated. Data session: a wireless ss data communication is in progress. No service indicator. ra TTY is enabled. ft Dormant mode: the phone is in a dormant state during a data call. Your connection is still active. Voice call: a call is in progress. No icon indicates that the phone is in Standby Mode. Location information sharing is set to E911 Only. See "Location Setting", p. 61. Location information sharing is set to Location On. See "Location Setting", p. 61. Bluetooth wireless connectivity is on. Battery level indicator. All sounds off. Alarm only is on. Vibrate mode is on. Speakerphone is on. You have missed calls. You have new messages in your inbox. Calendar appointment is set. You have new voicemails. 12 Alarm clock is activated. ■ Phone Menus In the default list view mode, phone features are grouped into nine main menus (Media Center, Messaging, Contacts, Email, Mobile IM, My Ringtones, Recent Calls, VZ Navigator, and Settings & Tools). Each main menu contains submenus and lists from which you can select or view items and customize your phone features. Some features may not be available, depending on your network. For more information, contact Verizon Wireless. You can also change the layout of the Main Menu from Standby Mode by selecting MENU > Settings & Tools > Display Settings > Main Menu Settings > Tab, List, or Grid. See "Main Menu Settings", p. 59. Note: In this guide, all the operations are instructed in the "Default List" view mode unless specially indicated. ft ■ Navigate Menus ra 1. In Standby Mode, use the Left and Right Soft keys to select Message or Contacts.. To access the main menus, select MENU with the OK key, then scroll up or down (or scroll left or right in the "Tab" mode). To provide a visual representation of your current position in the menu displayed on the right side of the screen. structure, a scroll bar may be displayed 2. Press the Clear key 3. Press the End key submenu. to return to the previous screen. to return to the Standby Mode from any menu or 4. Press the OK key to select highlighted menus and submenus. ■ Directional Key You can use the Directional key to move up, down, left, and right through the menu options. Depending on how you configure your phone, some or all of the following menu shortcuts may be available in Standby Mode using the Directional key. See "Set Directional Keys", p. 60. The default menu setting for the Directional key is as follows: 13 Press the Directional key Right — MY SHORTCUTS. Press the Directional key Up — Mobile Web. Press the Directional key Left — My Verizon. Press the Directional key Down — Calendar. My shortcuts My shortcuts provides quick access to other shortcuts. To access MY SHORTCUTS, press the Directional key Right. The default menu setting for MY SHORTCUTS is as follows: 1. New TXT Msg 2. New Picture Msg 3. Calculator 4. Alarm Clock ra ft To change the order of the MY SHORTCUTS menu, in Standby Mode, press the Directional key Right and scroll to the shortcut you want to move, and select Move.. Scroll to the place where you want to move the shortcut, and select SAVE. To change the default shortcuts, select Settings Settings.. For more information, see "Set Shortcuts", p. 59. 14 2. Set Up Your Phone ■ Antenna Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life. ft An internal GPS antenna is activated when you place an emergency call or when you select Location On from the Location Setting menu. See "Location Setting", p. 61. ra Any GPS should not be used for precise location measurement, and you should never rely solely on location ation data from the GPS receiver and cellular radio networks for positioning or navigation. ■ Change the Battery Remove the back cover With the back of the phone facing you, push down and slide the back cover toward the bottom of the phone and remove. Note: Always turn off the device, and disconnect the charger and any other device, before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached. 15 Remove the battery After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment. Replace the battery Insert the battery, making sure to align the contacts, and press down until the battery fits into place. Replace the back cover ra ft Replace the cover by aligning ligning the cover tabs with the slots in the side ide of the phone. Slide the cover toward the top, securing it with a click. Center. Important: Do not remove the front cover of this device. Attempts to remove remove the front cover may damage the phone. If your phone requires requires service, contact the Nokia Care Contact ■ Charge the Battery 1. Plug the AC-6U charger transformer into a standard AC outlet. 2. Open the charger cover on the left side of the phone. 3. Insert the charger output plug into the slot. The battery strength indicator scrolls, to show the battery is charging. The charge time varies depending on the battery level. 16 Note: The CA-101 data cable is used for data transfer and slow charging the battery while connected to a PC or laptop. Charging with the AC-6U charger is recommended when quick charging is needed. The CA-101 data cable is purchased separately. ■ Wrist Strap Note: The wrist strap does NOT come in the box. Thread a wrist strap as illustrated, and tighten it. ■ Replace the Camera Xpress-onTM Snap You can remove and replace the camera Xpress-onTM ress-onTM snap on the front cover of the phone. ft Note: Avoid touching the camera lens and keep the lens clean. ra 1. Place the phone with the front of the phone facing you. Place your thumb in the gap between the camera Xpress-onTM snap and the phone and push down. 2. Push the camera Xpress-onTM snap toward the top of the phone. 17 3. Slide the camera Xpress-onTM snap out and lift it away from the phone. ft 4. Place the two rear camera tabs into holes as illustrated. ra 5. Push the camera Xpress-onTM snap toward the bottom of the phone until it is in place. ■ Replace the Back Camera Xpress-onTM Snap You can remove and replace the back Xpress-onTM snap on the back of the phone. You must remove the back cover of the phone and the battery before removing the back Xpress-onTM snap. 1. Place the phone with the back of the phone facing you. Push and slide the back XpressonTM snap toward the bottom of the phone, and lift it from its compartment to remove. 18 2. To replace the back Xpress-onTM snap, align it with the slot in the phone. 3. Slide the back Xpress-onTM snap toward the top of the phone until it is in place. ■ Turn Your Phone On or Off ra ft To turn your phone On or Off, press and hold the End/Power key for at leastt 3 seconds. The first time the device is turned on, Setup Assistant prompts you to customize your device, see "Setup Assistant", p. 65. ■ Connect the Headset Note: A headset does NOT come in box. For hands-free operation, connect a compatible headset with a standard 2.5-mm plug to your phone. Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. 19 1. Plug the headset connector into the 2.5-mm headset jack on the side of your phone. 2. Position the headset on your ear. With the headset connected, you can make, answer, and end calls as usual. ■ Make A Call Recently dialed numbers ft To make a call (network service), make sure the phone is powered on. Enter the phone number (including the area code if necessary), and press the Send key . To delete a character to the left of the cursor, rsor, press the Clear key . Press the End key to end the call. To use the contacts menu and to enter contact numbers, see "Contacts", p. 38. Speakerphone ra To display the numbers for calls you have recently recently made, received, received or missed, press the Send key . To redial the most recent recent number, press the Send key again. To call another number from the list, highlight the number (or name) and press the Send key To use the Speakerphone during a call, press the Speakerphone key the Speakerphone off, press the Speakerphone key again. . To turn Warning: Do not hold the device near yo your ear when the Speakerphone is in use, because the volume may be extremely loud. Call a speed dial number Note: To use speed dials, you must first turn on the One Touch Dial feature, see "One Touch Dial", p. 64. To dial a single-digit speed dial number (1–9), press and hold the number of the assigned key. To dial a multi-digit speed dial number (10-999), press the first number(s), and press and hold the last number. See "Speed Dials", p. 42. You can also press the assigned speed dial number(s) and the Send key 20 ■ Answer Calls The following options are available to manage incoming calls (network service). Answer or silence an incoming call There are three ways to answer an incoming call depending on the phone settings. For more information, see "Answer Options", p. 63. • Open the flip (default setting). • Press any key. • The call automatically connects when your phone is connected to a handsfree device. • Utilizing the Soft keys, to silence an incoming call, select Quiet. To forward the call to your voicemail, select Ignore.. To end a call, press the End key ft Headset calls ra To answer a call when a headset is connected, press the Send key on your device or on the headset. To adjust the call volume, use the Volume keys on your headset if available. Adjust the earpiece volume Caller ID To adjust the volume during a call and wi with th the flip open, press the Volume keys Up or Down. When you adjust the volume volume, bars indicate volume level. The more bars, the higher the volume. To display both the name and number of the person calling you, the caller’s identity must be stored in Contacts. If the caller is not setup in your Contacts, only the phone number is displayed, or the incoming caller number may be shown as Restricted or Unavailable. See "Create New Contacts", p. 38. Picture ID You can assign a picture to a contact that is displayed when the contact calls you, or when you call the contact. See "Assign Picture ID", p. 39. 21 Silent Mode Open the flip, and press the Volume keys Down until All Sounds Off is displayed. To turn sounds on, press the Volume keys Up until the desired level is reached. Vibrate Mode To use Vibrate Mode with a ringtone, from Standby Mode, select MENU > Settings & Tools > Sounds Settings > Call Sounds > Call Vibrate > On > OK. To set Vibrate Mode on and silence all other sounds, open the flip and press the Volume keys Down until Vibrate Only is displayed. Or press and hold the Vibration key (see "Phone at A Glance", p. 10). Other options during a call Select Options for one of the following when you are on a call: ft Messaging — Send or retrieve messages. Contact List — Search your Contact List. Recent Calls — Check recent calls. ra Bluetooth Menu — Utilizing a Bluetooth headset. The following options are available if a Bluetooth Bluetooth headset is connected. Select Audio to Phone to hear the other party on the phone, or Audio to Device to hear the other party on the Bluetooth headset. Main Menu — Use Main Menu. Voice Privacy On — Select whether to protect the privacy of the conversation. Notepad — Open the notepad. Voice Record — Record a phone call. Mute Function To prevent the other person from hearing your own voice during a call, utilize the Left Soft key to select Mute. To deactivate this feature, select Unmute. 22 3. Text Entry Your phone offers five methods for entering text, numbers, and symbols: Word, Abc, ABC ,123, and Symbols. The following rules apply: • Press the Clear key to backspace the cursor and delete a character. • Press and hold the Clear key to delete an entire word. • Press # to enter a space, or to accept a completed word in Word Mode. • Press * to change the character case in Word, Abc, or ABC Mode. • Press the Left Soft key to change the mode. ■ Word Mode ra Activate Word Mode ft Word Mode is a predictive method of text entry. It uses a built-in dictionary to quickly recognize the most commonly used word for a specific key sequence. You only need to press the corresponding key on your Alphanumeric keypad once for each letter. To activate the Word Mode, press the Left Soft key, and select Word. Word Mode Text Entry The illustration below simulates your displa display each time a key is pressed in word mode. For example, to write "Verizon" with Word Mode on and the English dictionary selected, press each of the following keys once: • If a displayed word is not correct, press 0 to view other word options. • If your word does not appear, delete your entry, and press the Left Soft key to change the mode to Abc. Re-enter your word using the Multi-tap Mode. • When you have finished the word and it is correct, press # and insert a space. to confirm 23 ■ Abc (Multi-tap) Mode In the Abc (or Multi-tap) Mode, to enter a letter, repeatedly press a key until the desired letter appears. Activate Abc Mode To activate Abc Mode, press the Left Soft key, and select Abc, or ABC. Abc Mode Text Entry Press a key once to insert the first letter on the key, twice for the second letter, and so on. If you pause briefly, the last letter in the display is accepted, and your phone awaits the next entry. ■ 123 (number) Mode ra ■ Symbols Mode ft To enter a number in Abc, ABC, or Word rd Mode, press and hold the desired number key. To switch to 123 mode, press the Left Soft key, and select 123. To insert special characters into your message, message, press the Left Soft key, and select Symbols.. If the symbol you are looking for is not displayed, press the Directional key either Left or Right to display more symbols. In Abc or ABC Mode, press 1 repeatedly to scroll through some common punctuation marks and special characters. 24 4. Media Center Media Center (network service) allows you to personalize your phone to your own lifestyle and tastes. You can download ringtones, music, sounds, pictures, games, news, information, tools, and extras. You can also find information such as the location of restaurants or ATMs. Download charges for Media Center applications vary and airtime charges apply when browsing, downloading, and using certain applications. Media Center can be used anywhere on the Verizon Wireless network, as long as your phone has a digital signal available. Note: This feature shares memory space with other features. ft ■ Tunes & Tones ra You can personalize your phone with sounds and ringtones using Tunes & Tones (network service). A large variety of music music styles are available, such as current hits, pop, and hip-hop. In Standby Mode select MENU > Media Center > Tunes & Tones and choose from the following options: Get New Ringtones > Get New Applications to download new ringtone applications, or use one of the applications applications to download ringtones from the internet. You can set a downloaded ringtone as a ringtone, a contact ID for a contact, or as an alert sound for calendar entries. New ringtones are stored in the My Ringtones folder. Subscription and purchase pricing are available. purc My Ringtones — To set your favorite music as a ringtone, see "My Ringtones", p. 47. My Sounds — Select Record New to record sounds such as music, or spoken words. You can play the recorded sounds later or send them in a picture message. Highlight a sound and select PLAY to listen to it, Erase to delete it (except the default sounds) or Options and from the following: • Send — To send the highlighted sound in a picture message. • To Online Album — To upload the highlighted sound to Online Album. • Rename — To rename the highlighted sound, enter a new name and select OK (only for self-recorded sounds) to save. 25 • Lock — To protect a sound from being erased (only for self-recorded sounds). • Erase All — To erase all sounds stored in the phone (only for self-recorded sounds). • File Info — To view file information about the highlighted sound. ■ Pictures Pictures (network service) allows you to view, take, and send digital pictures from your phone. You can take photos with the built-in camera. ft After you take a picture, you can attach it to a picture message, or set it as wallpaper or picture ID for a contact. When you attach a picture to an entry in your list of contacts, the picture is displayed yed when the contact calls you or when you call the contact. Pictures can be stored in the My Pictures folder or uploaded to Online Album.. See "Picture Message", p. 32. Your phone supports image capture resolution 160 x 120 ,320 x 240, and 640 x 480 mega pixels. Take a Picture ra If there is not enough memory to take a new photo, delete old content in the My Pictures gallery. To utilize the built-in camera, press the the Camera key on the keypad, or in Standby Mode select MENU > Media Center > Pictures > Take Picture. To take a picture, press TAKE.. To adjust the picture quality, select Options and choose from the available options: Resolution — Choose 640 x 480 480, 320 x 240, or 160 x 120, and select SET. Self Timer — Choose Off, 3 seconds, 5 seconds, or 10 seconds, and select SET. Brightness — Press left or right on the Directional key, and select SET. White Balance — Press left or right on the Directional key to choose Auto, Sunny, Cloudy, Tungsten, Fluorescent, or Darkness, and select SET. Shutter Sound — Choose Shutter, Silent, Say "Cheez", or Ready! 1 2 3, and select SET. Color Effects — Press left or right on the Directional key to choose Normal, Sepia, Black & White, Negative, Aqua, or Green, and select SET. Capture Mode — Choose Landscape or Portrait, and select SET. 26 After taking a picture, you can save it to My Pictures, send it in a picture message, upload it to Online Album, or erase it. Other options Get New Pictures — Select Get New Applications to download picture applications, or use one of the applications to download images from the internet. Subscription and purchase pricing are available. My Pictures — Select pictures from your My Pictures folder to send, lock, erase, rename, or view. To use a picture, select Options > Send, Set As, To Online Album, Take Picture, Get New Pictures, Rename, Lock or Unlock, Erase All, or File Info. Online Album — Access the online picture album to upload pictures. For more information, please see https://picture.vzw.com/login.do. https://picture.vzw.com/login.do ■ Games ■ Mobile Web ra ft To open games from the games gallery or download a new game (network service), select MENU > Media Center > Games > Get New Applications and choose a game option. Select the game you want and a payment option, and download the title. You can start using the application as soon as the download is complete. To connect to the internet and browse for the latest news, stock quotes, movie listings, and more (network service), select MENU > Media Center > Mobile Web or press up on the Directional Directional key in Standby Mode. ■ Browse & Download To browse the internet for information (network service), such as the location of a restaurant or the nearest ATM, select MENU > Media Center > Browse & Download > Get New Applications or VZ Navigator to download applications. Subscription and purchase pricing are available. ■ Extras To access the internet for additional Verizon Wireless downloads and applications (network service), select MENU > Media Center > Extras > Get New Applications. Subscription and purchase pricing are available. 27 ■ Info To check memory status or find information on how to download applications, select MENU > Media Center and press the Right Soft key to view the information screen. This menu enables you to check the App. Memory, Content Memory (phone memory), or View Log of downloads. To find information on how to add, delete, disable, or restore applications, determine airtime charges, or cancel subscriptions, select Help. ■ Incoming Calls While downloading an application, calls are automatically sent to your voicemail, if available. ft When using an application, an incoming call automatically interrupts the application and allows you to answer the call. When you complete your call, you can resume using the application. Make an emergency call while online ra You can end your data connection to make an emergency call. 1. Close your connection by pressing the End key as many times as needed to clear the display and get the phone ready for calls. 2. Enter 911 for emergency calls. 3. Press the Send key ■ Security and Functionality Your phone supports a digital rights mana management system to protect acquired content. Content such as ringtones may be protected and associated with certain usage rules. Usage rules are defined in the content activation key that can be delivered with the content or delivered separately. You may be able to update the activation key. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee. Mobile Web 2.0 is a digital network service that is not available everywhere. Mobile Web text messages and alerts fees apply to sent and received messages. Airtime charges apply. See "Network Services", p. 7. 28 The security icon ( ) does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. Verizon Wireless secures the data transmission between the gateway and the content server. ra ft Important: Use only services that you trust and that offer adequate security and protection against harmful software. 29 5. Messaging If you have subscribed to a message network service, you can send and receive messages to and from compatible phones that also subscribe to a message service. You can also send and receive multimedia and e-mail messages. Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device. Note: The message sent icon or text on your device screen does not indicate that the message is received at the intended destination. ■ Text Messages ra ft When composing text messages (SMS) or enhanced messages (EMS, messages that can contain simple pictures, sounds, animations, or melodies), the number of characters used (out of a maximum per message) appears in the top left corner of the message screen. Segments are created when the message length exceeds the maximum allowed number of characters. The number of segments used (out of a maximum of 7) appears in the top right right corner of the message screen. No additional text can be entered have been used. red when all segments and characters ch Segments are delivered as individual individual messages. For information on entering text into messages, see "Text Entry", p. 23. ■ Picture Messages Picture messages are multimedia messag messages that can contain text, pictures, camera pictures, slides, and sound reco recordings. Depending upon your network services, you may receive a message that includes an internet address where you can view the picture messages. Pictures are scaled to fit the display area. Your phone has a picture message viewer for playing messages. Incoming messages remain in the inbox until you delete them (when Auto Erase Inbox is set to off, see "Message Settings", p. 35). When you save the picture message, you can use the image as wallpaper or use the sound as a ringtone, unless the content is protected by copyright. See "Pictures", p. 26. Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. 30 Copyright protection may prevent some images, music, and other content from being copied, modified, or transferred. Contact Verizon Wireless for availability of and a subscription to the multimedia messaging service (MMS). If you are making a call, or browsing the internet, or you have other applications running, you can receive multimedia message notifications, but not the actual message. The delivery of multimedia messages can fail for a number of reasons, so do not rely solely on them for essential communications. ■ New Message To compose a new message from Standby Mode, select MENU > Messaging > New Message > TXT Message or Picture Message or from Standby Mode press the Left Soft key Message > New Message > TXT Message or Picture Message. ft TXT Message To write and send a text message, do the following: ra 1. Select a recipient. To add an existing existing number or address, select Add > From Contacts, Recent Calls,, or Groups Groups,, highlight the recipient, and select MARK > Done. You may also use the Alphanumeric keypad keypad to manually enter a phone number or e-mail address in the To: field. The default entry mode for the To: field is 123 (number). To switch to Multi-tap Mode to enter an e-mail address, utilize the Soft key to select 123 > Word, Word, Abc Abc, ABC, or Symbols. See "Text Entry", p. 23. 2. To access the text entry field, select OK. 3. Compose a message using the Alphanumeric keypad. See "Text Entry", p. 23. 4. To send the message, select SEND, or press the Send key To save the message as a draft before you send it, press the End key select Yes. Your message is saved in the Drafts folder. , and TXT message options To customize a new text message, select Options when the cursor is in the text entry field, and one of the following options: Save As Draft — Save your message in the Drafts folder. 31 Add Graphic — Include a graphic icon in your message. Enhanced messages cannot be sent to e-mail addresses. Add Sound — Include a sound in your message. Enhanced messages cannot be sent to e-mail addresses. Add Name Card — Include a name card in your text message. Add Quick Text — Insert text from the Add Quick Text gallery into your document. See the Quick Text option under "Message Settings", p. 35. Priority Level — Set the priority level. Select High, or Normal. If set to high, "URGENT" appears at the top of receiver’s message. Cancel Message — Close the message without sending it. To save it in the Drafts folder, select Yes. To delete the message and exit, select No. Picture Message ft To compose and send a picture message, do the following: ra 1. To compose a new message from Standby Mode, select MENU > Messaging > New Message > Picture Message or press the Left Soft key Message > New Message > Picture Message. Message. Select a recipient or enter enter in the contact phone number or email address. For more information, information, see "TXT Message", p. 31. 2. To access the text entry field, select OK OK.. 3. Enter the message in the Text: field using the keypad. See "Text Entry", p. 23. The number of characters used (out of a maximum of 1000 per message) appears in the top left corner of the picture message screen. No additional text pic can be entered when all characters characters have been used. 4. To add a picture, scroll to Picture:, Picture: and select My Pics. Scroll to the desired picture and select OK. To add a new picture using the built-in camera, select My Pics > Options > Take Picture > OK. 5. To add a sound file, scroll to Sound:, and select Sounds. Scroll to the desired sound and select OK. To record a new sound, select Sounds > Record New. To listen to a recorded sound, select Play. 6. To add a message title, scroll to Subject:. Enter text (up to 80 characters) using the keypad. 7. To send the message, select SEND, or press the Send key To save the message as a draft before you send it, press the End key select Yes. Your message is saved in the Drafts folder. , and 32 Picture message options To set picture message options, select Options, when the cursor is in the Text:, Picture:, Sound:, or Subject: fields, and you may select from the following: Preview — View your message. Save As Draft — Save your message to the Drafts folder. Add Quick Text — Insert text from the Add Quick Text gallery (in Text: and Subject: only). Add Slide — Add a slide to the message. Priority Level — Set the priority level to High or Normal. Remove Picture — Remove a picture from the message (if previously added, and when the cursor is in this field). Remove Sound — Remove a sound file from the message (if previously added, and when the cursor is in this field). ft Remove Slide — Remove slide file from the message (if previously added). ra sending it. To save it in the Drafts Cancel Message — Close the message without sending folder, select Yes > OK.. To delete the message and exit, select No. ■ Inbox Your phone can receive text messages, enhanced messages, mess picture messages, emails using SMS, and alerts in the Inbox (network service). When you receive an incoming message, an alert is displayed. To immediately view the new picture, or text message (if TXT Auto View is off), select View Now. If you select View Later,, the new message notification notificat icon is displayed. The text (if TXT Auto View is on), or picture message will be automatically displayed. For details, see "Message Settings", p. 35. View the Inbox To access the Inbox, from Standby Mode, select MENU > Messaging > Inbox or press the Left Soft key Message > Inbox. The number of messages in the inbox is shown in parentheses. When you open the inbox, the list of messages is displayed. The newest messages are displayed first. Select a message and Erase > Yes to delete the selected message, select OPEN to view the message, or select Options and from the following: Reply — Send a TXT Message, or Picture Message reply. 33 Reply w. copy — Send a reply which includes the original message text (text messages only). Forward — Forward the message to another phone number, or e-mail address or upload the message to Online Album. Lock — Protect the message from being deleted. Add To Contacts — Save the contact information to Contacts (if the recipient is not in the Contact List). Erase Inbox — Delete all messages in your inbox. Message Info — Display sender information, time stamp, and other information. View or play messages To view or play a message in the inbox, select the message and OPEN. If necessary, scroll up or down to view the whole message. Erase — To delete the selected cted message, select Yes > OK OK.. ft Mute — Disable the sound (for picture messages with sound attached). REPLY — Send a TXT Message, or Picture Message reply. ra Select Options and you may select from the following: • Play Again — Listen to the sound again (for picture messages with sound attached). • Forward — Forward the message to another recipient. • Erase — Delete the message. • Save Picture — Save the picture (for mess messages with a picture attached). • Save As Ringtone — Save the sound and use it as your ringtone (for picture messages with sound attached). • Save Sound — Save the sound (for picture messages with sound attached). • Reply w. copy — Send a reply which includes the original message text (text messages only). • Save Quick Text — Save the message text in the Quick Text gallery. • Lock — Protect the message from being erased. • Add To Contacts — Save the contact information to the Contacts (if the recipient is not in the Contact List). • Message Info — Display sender information, time stamp, and other information. 34 ■ Sent Messages The Sent folder stores text, or picture messages that have been delivered to their recipients. The number of messages stored in the Sent folder is shown in brackets. To open the Sent folder, from Standby Mode, select MENU > Messaging > Sent or press the Left Soft key Message > Sent. The list of sent messages is displayed. The newest message is displayed first. Highlight a message, and you may select from the following: Erase — To delete the sent message, select Yes. Options — Select from the available options. OPEN — View the message. With the message open, press Options and you may select from the following: • Play Again — Play the sound again (for picture messages with sound attached). • Forward — Forward the message to another recipient. ft message (for picture messages with sound • Erase — Delete the selected sent message attached). ra • Lock — Protect the message from being erased. • Save Quick Text — Save the message text in the Quick Text gallery. • Add To Contacts — Add the recipient to Contacts (if the recipient is not in the Contact List). • Message Info — Display recipient information, time stamp, and other information. ■ Draft Messages The draft folder is used to store drafts of text and picture messages. The number of messages stored in Drafts is shown in brackets. To open the Drafts folder, from Standby Mode, select MENU > Messaging > Drafts or press the Left Soft key Message > Drafts. The newest message is displayed first. Highlight a message, and select from the available options. ■ Message Settings To configure settings for messages, from Standby Mode, select MENU > Messaging and press the Left Soft key Settings, or press the Left Soft key Message and press the Left Soft key Settings, and one of the following: 35 Entry Mode — Change the Default Entry mode for writing text to Word, Abc, ABC, 123. Auto Save Sent — Select whether to automatically save all sent messages to the Sent folder. To be asked every time to save a sent message, select Prompt. Auto Erase Inbox — Select whether to automatically erase the oldest (unlocked) message from the Inbox when the device memory is full. If set to Off, you are prompted to delete messages from your Inbox when the memory is full. TXT Auto View — Select whether to display incoming text messages automatically. If set to Off, it will display a prompt message to select View Now or View Later when a message is received. Picture Auto Receive — Select whether to save incoming picture messages automatically. If set to Off, you can select Reject to refuse to receive the message. ft Quick Text — View and edit Quick Text entries, which are short, prewritten messages that can be recalledd and inserted into a text message. The gallery of preloaded and user-defined Quick Text entries is displayed. To add an entry, select New, enter the text, and select OK.. To erase a Quick Text entry, highlight the entry, and select Erase > Yes. ra Voicemail # — Change the default speed dialing number for voicemail. Enter the new number, and select OK OK.. Callback # — Change the default callback number. Enter the new number, and select OK. Signature — Create or edit text that is appe appended to each outgoing message. If you do not want to add a signature, select None > OK. Select Custom, enter the signature text, and select OK OK.. ■ Voicemail Messages Voicemail is a network service that allows you to listen to voice messages recorded in the voicemail box. When you have a new voice message, your phone alerts you and prompts you to listen now or later. If you select Listen later, the voicemail icon is displayed in Standby Mode. Listen to voicemail messages When you see a new voice message alert, select Listen now to access your voicemail box. You can also select Message > Voicemail, or press and hold the voicemail speed dial key 36 The number of new messages and the date and time of the last message received are displayed. To access your voicemail box, select CALL. To reset the voicemail counter, select Clear > Yes. The new voicemail icon disappears from the screen. Resetting the voicemail counter does not delete voicemail from your voicemail box. To delete messages, you must access your voicemail box and use the voicemail system commands. If the storage limit of your voicemail box is exceeded, old messages may be overwritten. ■ Mobile Instant Messaging For details about instant messaging (network service), see "Mobile Instant Messaging", p. 46. ■ E-mail Messages ft For details about E-mail messages (network service), see "E-mail Messages", p. 45. ■ Chat ra To launch a browser and chat with IM users users (network service), in Standby Mode, select Message > Chat. 37 6. Contacts You can keep track of contact information in Contacts. Contact names are saved in Contacts memory, and each contact entry can contain multiple phone numbers and e-mail addresses. Contact entries can be assigned to speed dials, picture IDs, ringtones, and caller groups. ■ Create New Contacts To add a contact to your Contact List: 1. Select MENU > Contacts > New Contact. 2. Scroll to each field, and enter the contact information for any of the following: ft Name: — the name of the contact, which is displayed in the Contact List. If no name is entered, the default phone number number or email address is displayed in the Contact List. Mobile 1: — the primary mobile phone number for the contact. This is the default number for the contact. ra Home: — the home phone number for the contact Work: — the business phone number for the contact Email 1: — the primary e-mail address for the contact Group: — a caller group for the contact. See "Edit caller groups", p. 41. Picture: — a picture ID for the contact. See "Assign Picture ID", p. 39. Ringtone: — a distinctive ringtone for the caller. See "Add a Ringtone", p. 40. Mobile 2: — the secondary mobile phone number for the contact Fax: — the fax number for the contact Email 2: — the secondary e-mail address for the contact 3. Select SAVE. You can also quickly create a contact in Standby Mode by entering the number and selecting Save > Add New Contact and follow the steps above. If no name is entered, the default phone number or email address is displayed in the Contact List. 38 Change the default number The default number is the contact number that is called when you dial by contact name. To change the default number when multiple numbers are assigned to a single contact: 1. Select Contacts, then scroll to the contact you wish to modify, and press Edit. 2. Highlight the phone number you wish to set as the default number, and select Options > Set As Default > OK > Yes or No. Set up phone numbers with pauses Pause codes instruct the receiving system to pause or wait before entering the numbers that follow them in the dialing string. You can insert a wait or pause to separate additional digits (for example, a password or extension) from the main phone number. To add a pause code to a new phone number in Standby Mode, do the following: ft 1. Enter the number. Select Options and one of the following: ra 2-Sec Pause — to set the device to pause for two seconds before dialing the secondary numbers. "P" appears in the dialing string. You can enter as many pauses as you need to accommodate the timing on automated answering services. Wait — to set the phone to wait for you to send (or manually enter) the secondary numbers. "W" appears in the dialing string. 2. Enter additional number(s) and select Save. 3. If Add New Contact is selected, choose a number, and select OK. Enter a name or other fields, and select SAVE SAVE. 4. If Update Existing is selected, choose an existing contact > a number > OK. Assign Picture ID You can set the phone to display the picture of a caller from your Contact List when your phone rings. To assign a picture ID to a contact in Standby Mode: 1. Select Contacts, scroll to the contact you wish to modify, and select Edit. 2. Scroll to the Picture: field, and select Set. 3. Highlight an image from My Pictures, and select OK. 4. To save the picture ID for the contact, select SAVE. 39 Add a Ringtone You can add a distinctive ringtone to distinguish which contact is calling. To assign a ringtone to a contact in Standby Mode: 1. Select Contacts, scroll to the contact you wish to modify, and select Edit. 2. Scroll to the Ringtone: field, and select Set. 3. Highlight an existing ringtone from the ringtone list, and select OK, or select Play to listen to the ringtone. 4. To save the Ringtone for the contact, select SAVE. ■ Contact List Access the Contact List ft The Contact List can store up to 500 contacts. The amount of numbers, email addresses, and contact information that you can save may vary, depending on the length and the total number of entries in the Contact List. ra To view the Contact List, press Contacts in Standby Mode, or select MENU > Contacts > Contact List.. To quickly find a contact you want, enter the first letter of the contact name in the Go To field. Matching entries are displayed. To call the highlighted contact, press press the Send key . When you select a contact name, the default number associated with the contact is used unless you select another number. To call another nu number of the highlighted contact, select VIEW,, scroll to a number, and press the Send Se key . Or you can scroll left or right using the Directional key , and press the Send key View or Edit the Contact List To edit a contact in Standby Mode, select Contacts, scroll to desired contact, and select Edit. To view contact information, select Contacts, scroll to desired contact, and select VIEW. Numbers, e-mail addresses, or groups are displayed for the contact. Select one of the following: Erase — Delete the contact. EDIT — Modify the contact information. For editing options, see "Create New Contacts", p. 38. 40 Options — Send a text, select New TXT Msg or picture message, select New Picture Msg to the contact. To call the contact, select Call. Contact List Options In Standby Mode, select Contacts, scroll to the contact you want, select Options, and choose from the following: New Contact — Create a new contact. Erase — Delete the contact. New TXT Msg — Send the contact a text message (network service). New Picture Msg — Send the contact a picture message (network service). Set As ICE Contact or Unassign ICE Contact — Assign or unassign your contact as an ICE (In Case of Emergency) contact. Call — Dial the contact (network service). ■ Groups ra Erase All — Delete all contacts. ft Send Name Card — Send the name card to a compatible compatible device using Bluetooth. From Standby Mode, to access the Groups menu, select MENU > Contacts > Groups.. The default caller groups are No Group Group, Business, Family, Friends, Other, and VIP. A contact can only be associated with one caller group at a time. If you add a contact from one group to another group, that contact is removed from the first group. Create a new caller group In Standby Mode, select MENU > Contacts > Groups > New, enter the new group name, and select SAVE. See "Add contacts to groups", p. 41. Edit caller groups Once created, caller groups can be updated with new contacts, renamed, or erased. The default caller groups cannot be renamed or erased. Add contacts to groups To edit caller groups and assign contacts to them: 41 1. In Standby Mode, select MENU > Contacts > Groups. 2. Highlight a group from the list, and select VIEW > ADD; or Options > Add. 3. Highlight the desired contact, select MARK and continue until all contacts are marked and then select Done. To edit individual contacts and add them to caller groups: 1. In Standby Mode, select Contacts, scroll to the contact you want to add to a group, and Edit. 2. Scroll to the Group: field, and select Set. 3. Highlight an existing group from the list of group names, and select OK. Select SAVE to update the contact. Rename a group ft In Standby Mode, select MENU > Contacts > Groups Groups,, highlight the group you want to rename (except the default groups), and select Options > Rename. Edit the caller group name, and select SAVE. Erase a group ra To erase a group you have created. From the Standby Mode, select MENU > Contacts > Groups,, highlight the group, and select Options > Erase > Yes. The contacts associated with the group are not erased. Send a group message To send a message to a group (network service). From the Standby Mode, select Groups,, the group name, and Options > New TXT Msg or New MENU > Contacts > Groups Picture Msg.. Create the message you want to send to the group, and select SEND. See "New Message", p. 31. ■ Speed Dials You can associate any mobile, home, or work number in the Contact List with a speed dial key from 2 to 999 (network service). Speed dial key is used to access voicemail. Speed dial keys 97 (#BAL) are used to check your billing balance. Speed dial keys 98 (#MIN) are used to check your Verizon Wireless usage. Speed dial keys 99 (#PMT) are used to make a bill payment. To dial a speed dial number, see "Call a speed dial number", p. 20. 42 Set up speed dialing 1. From Standby Mode, select MENU > Contacts > Speed Dials. 2. Scroll to an unassigned speed dial slot, and select SET. 3. Highlight the contact you want to assign to the selected speed dial slot, and select OK. 4. If more than one number is saved in the contact, highlight the mobile, home, or work number you want to assign, and select OK. Select OK again to set. If only one number is saved, "Set Speed Dial to contact?" will appear on your display. Select Yes and press the OK key to save the speed dial. Edit speed dial numbers 1. From Standby Mode, select MENU > Contacts > Speed Dials Dials. 2. Scroll to an assigned speed dial slot, and select SET SET.. ft 3. Select Yes to overwrite the existing speed dial number. Highlight the contact you want assigned to the selected speed dial slot, and select OK. ra 4. If more than one number is saved in the contact, highlight the new mobile, home, or work number you want to assign, and select OK. Select Yes to set. Delete speed dial numbers From Standby Mode, select MENU > Contacts > Speed Dials, scroll to desired assigned speed dial slot, and Remove > Yes Yes. Or in Standby Mode select Contacts > scroll to a contact assigned with speed dial numbers > VIEW> > a number > EDIT > Options > Remove Speed Dial > Yes. ■ In Case of Emergency (ICE) You can set up to three contacts as your In Case of Emergency (ICE) contacts. You can call ICE contacts even if your phone is locked. See "Security", p. 62. A contact can only be assigned as one ICE contact. If you assign the same contact to different ICE contacts, your phone accepts the last assignment only. Add a new ICE contact To add a new ICE contact, do the following: 1. From Standby Mode, select MENU > Contacts > In Case of Emergency, an unassigned contact, and ADD. Select one of the following: 43 From Contacts — Add an existing contact from your Contact List. New Contact — Create a new contact and set it as an ICE contact. See "Create New Contacts", p. 38. 2. If From Contacts is selected, highlight a contact, and select OK. 3. If New Contact is selected, enter a name or other fields, and select SAVE. ICE contacts options For more options on ICE contacts. From Standby Mode, select MENU > Contacts > In Case of Emergency, an assigned contact, and from the following: Call — Call the ICE contact. VIEW — View the details of the contact. • To delete the contact from Contact List, select Erase Erase. ra ft • To modify the information of the contact, select EDIT. EDIT. For editing options, see "Create New Contacts", p. 38. Both the erase and edit options affect your Contact List. For example, if you erase a contact, the contact is deleted from both ICE contacts list and Contact List. Always be careful when you select either option. Msg, New Picture Msg, • For further contact options, select Options > New TXT Msg or Call. Options — Modify the ICE contact entry. To assign another contact as the ICE contact entry, select Re-assign Re-assign.. See "Add a new ICE contact", p. 43. To unassign the entry, select Unassign Unassign.. Add Personal Information To create personal information of your own, or for ICE contacts. From Standby Mode, select MENU > Contacts > In Case of Emergency > Personal Info > ADD. After adding the information, press SAVE to retain it, or Cancel to exit. To edit or erase the existing note, highlight a note > VIEW > EDIT or press Erase > Yes to delete the selected note. 44 7. E-mail Messages To launch the internet browser and access the email messaging screen (network service), in Standby Mode, select Message > Email. A Mobile Web session starts, scroll to an email provider and press the OK key. Follow the on-screen prompts to log into your account. ra ft Important: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your phone. 45 8. Mobile Instant Messaging ra ft To access instant messaging (network service), in Standby Mode, select Message > Mobile IM > Get New Applications to download IM applications, or use one of the applications preloaded. After launch the application, press the Right soft key Menu, scroll to "Go To URL" to enter a web address for your IM site, and follow the on-screen prompts to log into your account. 46 9. My Ringtones You can set your favorite music as a ringtone, a contact ID for a particular contact, or as alert sounds for calendar entries through My Ringtones. From Standby Mode, select MENU > My Ringtones > Get New Applications > Get New Applications again to download a new ringtone, or use one of the tones stored in the this folder. ra ft To apply a ringtone, highlight the tone, and select Set As > Ringtone, Contact ID, or Alert Sounds. To listen to the highlighted ringtone, select PLAY. To delete the highlighted ringtone (except the default ringtones), select Options > Erase, or File Info to view file information about the highlighted ringtone. 47 10. Recent Calls Information about missed, received, or dialed calls is stored in Recent Calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest. ■ View Calls To view calls from Standby Mode, select MENU > Recent Calls > Missed, Received, Dialed, Blocked (Blocked is only available when Block All or Contacts Only is set to incoming calls. See "Security", p. 62), All, or View Timers. The calls are listed by most recent first. ft Missed calls are calls that are not answered. The missed calls feature does not function when your phone is turned off. Received calls are calls that are answered. All dialed calls are saved in Dialed.. The calls that are dialing from the restricted list are saved in Blocked. When viewing the call lists, the following options are available: ra Message — Send the selected number a New TXT Msg or New Picture Msg. See "New Message", p. 31. This option is not shown for unavailable or voicemail numbers. OPEN — View call details. Options — To view more details, or protect protect the call from being erased, select Save, Erase, Lock, Erase All,, or View Timers. Timers. ■ View Call Timers You can view the total number of calls, duration (mm:ss) of calls, and the data transfer information with the View Timers option. From Standby Mode, select MENU > Recent Calls > View Timers > Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls, Transmit Data, Received Data, Total Data, Last Reset, Lifetime Calls, or Lifetime Data Counter. Note: Some timers may be reset during service or software upgrades. The actual time invoiced for calls and services by Verizon Wireless may vary, depending on network features, rounding off for billing, taxes, and so forth. 48 Reset Call Timers To reset a selected call or data timer or to reset all timers to zero (except Lifetime Calls and Lifetime Data Counter), do the following: 1. From Standby Mode, select MENU > Recent Calls > View Timers. 2. Highlight the timer you want to modify, and select Reset > Yes. ra ft 3. Select Reset All > Yes to reset all timers (except Lifetime Calls and Lifetime Data Counter). 49 11. VZ Navigator ra ft VZ Navigator supports GPS-related service, helping you find your way. With VZ Navigator, you can get your current location, or get directions from the current location to a selected address. Select MENU > VZ Navigator > OK to download navigator applications. To use this service, you must turn on Location On, see "Location Setting", p. 61. 50 12. Settings & Tools Use the Settings & Tools menu to customize your phone and to use your phone as an organizer and personal digital assistant. ■ My Verizon The Verizon Wireless My Verizon web portal (network service) allows you to access your account information. From Standby Mode, select MENU > Settings & Tools > My Verizon or press the Directional key to the left in Standby Mode. For more information, contact Verizon Wireless. ■ Tools ra Voice Commands ft To access the voice commands, calculator, or, calendar, calendar preview, alarm clock, stopwatch, world clock, and notepad. From Standby Mode, select MENU > Settings & Tools > Tools. Voice commands allow you to do things by verbal command (for (f example, make calls, confirm voicemail, and so on). To activate voice commands. From Standby Mode, select MENU > Settings & Tools > Tools > Voice Commands, or press the Voice Command key on the right side of the phone. See "Phone at A Glance", p. 10. For more details, see "Voice commands", p. 67. Calculator Calculator allows you to perform simple mathematical calculations. To use the calculator: 1. From Standby Mode, select MENU > Settings & Tools > Tools > Calculator. 2. Enter the first number of the calculation using the Alphanumeric keypad. 3. Use the Directional key to add (up), subtract (down), multiply (right), or divide (left) values. 4. Enter the second number. 5. Press the OK key (equals) to solve your equation. Select Operator to use parentheses in your equation or to enter an exponent (Power). 51 Press the Clear key to delete a keystroke, or select Clear to cancel your calculation and clear the screen. Press # to switch a value to positive or negative, and press * decimal point. to enter a Note: This calculator has limited accuracy and is designed for simple calculations. Calendar The calendar allows you to document your agenda and keep it convenient and easy to access. You can schedule events into the calendar and set your phone to alert you with a reminder. Schedule a new event ft 1. From Standby Mode, select MENU > Settings & Tools > Tools > Calendar (or press down on the Directional key in Standby Mode). Scroll to the required event date and select Add. ra 2. Enter the event title, start and end date, and time using the Alphanumeric keypad. 3. To set the time zone, select Time Zone > Set > a zone > OK. 4. To set the frequency, select Recurrence > Set > a frequency > OK. 5. To set a tone, select Tone > Set > a tone > OK. 6. To set vibrate on, select Vibrate > Set > On > OK. 7. To set a reminder, select Reminder > Set > a setting > OK. 8. To save the settings, select SAVE SAVE. The date scheduled with events is highlighted in different color. Delete an existing event 1. From Standby Mode, select MENU > Settings & Tools > Tools > Calendar (or press down on the Directional key in Standby Mode), scroll to the event date, and VIEW. 2. Highlight the event entry you want to remove and press the Left Soft key Erase > Yes > OK. 52 Update an existing event 1. From Standby Mode, select MENU > Settings & Tools > Tools > Calendar (or press down on the Directional key in Standby Mode), scroll to the event date, and VIEW. 2. Highlight the event entry you want to modify, and select VIEW > EDIT. 3. Highlight and edit the event entry fields you want to update, and select SAVE. To set the calendar options. From the Standby Mode, select MENU > Settings & Tools > Tools > Calendar > Options (or press down on the Directional key in Standby Mode) and one of the following: • Weekly — View a weekly calendar preview. • Daily — View a daily calendar preview. • Go to Date — Enter a specific date using the Alphanumeric keypad. • Erase a Day — Delete the events of a highlighted day. ft • Erase Passed — Delete past events. • Erase All — Delete all events on your calendar. Calendar Preview ra • Calendar Preview — Display the event information in Standby Mode. See "Calendar Preview", below. Calendar preview reminds you the events of the current date. From Standby Mode, select MENU > Settings & Tools > Tools > Calendar Preview > Main Screen > On. If select Off,, is displayed in Standby Mode. To set the font size of an event. In Standby Mode, select MENU > Settings & Tools > Tools > Calendar Preview > Font Size > Normal or Large. Alarm Clock Alarm clock allows you to set up to three alarms. You must turn on your phone to use the alarm clock. To set an alarm: 1. From Standby Mode, select MENU > Settings & Tools > Tools > Alarm Clock > Alarm 1, Alarm 2, or Alarm 3. 2. Scroll left or right to activate the alarm. 3. Highlight the Set Time field and use the Alphanumeric keypad to enter the time of day the alarm will sound. Press the Left Soft key to select either am or pm. 53 4. To set how often the alarm will occur, highlight the Frequency field and scroll left or right. 5. To choose an alarm ringtone, highlight the Ringer field, and select Set, the desired ringtone, and OK. 6. Select SAVE. When an alarm is set, is displayed in Standby Mode. To turn an alarm off, from Standby Mode select MENU > Settings & Tools > Tools > Alarm Clock. Highlight the alarm you want to modify, and select OK > change to Off > SAVE > "Set on" will appear on the display > select No. When an alarm time is reached, the alarm tone sounds or vibrates, depending on the master volume settings. To set it to vibrate without sound, press the Volume keys to Vibrate Only. See "Phone at A Glance", p. 10. Select Snooze to turn the alarm off and have it sound again after 10 minutes. Select Dismiss to turn off the alarm. ft Stopwatch ra The stopwatch can be used to measure elapsed time, such as for a sporting event. You can time up to ten records. The stopwatch accuracy is not the same as that of a professional instrument. Therefore, Nokia advises against its use for official competitions or any other event in which a high-precision device would would be required to establish exact times. To time an event, from Standby Mode, select MENU > Settings & Tools > Tools > Stopwatch > START START.. The elapsed time is displayed in mm:ss:ms format. To time multiple events and mark the elapsed time for each event you are measuring, select Split (this option is only available while timer is running). To stop the watch, select STOP. To reset the watch to zero, select Reset when the watch is stopped. World Clock World clock allows you to determine the current time in another time zone or country. From Standby Mode, select MENU > Settings & Tools > Tools > World Clock. The world map is displayed. To display the time in a city, scroll on the world map to the city. To view a list of cities, select Cities. 54 To turn daylight savings time On or Off for a city, select the city and Set DST. Notepad Notepad allows you to add, read, edit, or erase notes. To create a note from Standby Mode, select MENU > Settings & Tools > Tools > Notepad > New or Add. Enter your note text (see "Text Entry", p. 23), and select SAVE. To view or edit a note, highlight the note, and select VIEW> EDIT. To delete one note or all notes, select Options > Erase or Erase All. ■ Bluetooth Menu ft Bluetooth technology enables wireless connections between electronic devices within a range of 10 meters (33 feet). A Bluetooth connect connection can be used to send images, text, gallery files, voice oice recordings, notes, or to connect wirelessly to other devices using Bluetooth technology, hnology, such as computers. You can synchronize your phone and your PC using Bluetooth connectivity. ra Since devices using Bluetooth technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of-sight. However, the connection can be subject to interference from obstructions, such as walls, or other electronic devices. This device is compliant with Bluetooth specification 2.0 + EDR supporting the following profiles: GAP (Generic Access Profile), Profile), SPP (Serial Port Profile), HSP V1.1 (headset profile), HFP V1.5 (handsfree ca car kit profile), PBAP (phonebook access profile), and OPP (object push profile). To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or Verizon Wireless. For more information, see the Bluetooth Technology organization website: https://www.bluetooth.org/. From Standby Mode, select MENU > Settings & Tools > Bluetooth Menu and you may select from the following options: 1. Add New Devices — to set up a pairing between your phone and another device with Bluetooth technology. 2. Turn On or Turn Off — to activate or deactivate Bluetooth connectivity. the top of the display indicates an active Bluetooth connection. at 55 3. Select Options and you may select from the following: 1. My Phone Name — to set the name of your device that is to be seen by others. Enter a name, and select OK. 2. Discovery Mode — to allow your device to be searched by other devices in the area. To hide your phone from other users, select Off. 3. File Receiving — to set the level of security when receiving files from other devices. There are three levels of security available: • Always Ask — to prompt you for permission each time you receive a file • Always Accept — to always accept files • Always Reject — to never accept files 4. Supported Profiles — to view information and help on supported profiles. t, the phone must have the headset For example, to use a Bluetooth headset, profile. ft business card. You can send and 5. My Business Card — to edit details of your business n other compatible devices. receive business cards between ra n mode is a safer way to avoid Note: Operating the device in hidde hidden malicious software. Do not accept Bluetooth connectivity from sources you do not trust. Alternatively, switch switch off the Bluetooth function. This does not affect other functions of the phone. Important: Features using Bluetooth tec technology increase the demand on battery power and reduce the battery life. Pair devices 1. From the standby screen, press the OK key ((MENU) to access the Main Menu. 2. Press up on the Directional key to select Settings & Tools, then press the OK key to select. 3. Press down on the Directional key to highlight Bluetooth Menu, then press the OK key to select. 4. With Add New Devices highlighted, press the OK key to select. 5. Put the headset you want to connect to in discoverable mode and then press the OK key on your phone. 6. Your phone will search for Bluetooth devices nearby and then display a list of available devices. Press down on the Directional key until you have highlighted the headset you want to pair with, then press the OK key (PAIR). 56 7. Use the Alphanumeric keypad to enter the passkey of the headset you want to pair with and press the OK key. 8. Your phone will then pair with the headset. Note: The phone automatically attempts to send a passkey of “0000” to the device and shows the message “ATTEMPTING TO AUTO PAIR.” The default PIN code is usually 0000. Refer to the Bluetooth accessory’s user guide for additional information. ■ Sounds Settings To adjust volumes and assign sounds to phone calls and alarms. From Standby Mode, select MENU > Settings & Tools > Sounds Settings and from the following: 1. Call Sounds — To set ringtones for incoming calls. Select Call Ringtone, scroll to the desired ringtone, and press OK.. To set the phone to vibrate when receiving a call, select Call Vibrate > On.. ra ft 2. Alert Sounds — Select the alert type (Tone ((Tone, Tone,, Vibrate Vibrate,, or Reminder) Reminder for an incoming text message, picture message, or voicemail. Select Emergency Tone to set the alert type (Alert, Vibrate Vibrate,, or Off Off)) for emergency dialing. 3. Keypad Volume — To set the volume for the keypad, keypad, press the Directional key Up and Down (this option only works when the master volume is not set to All Sounds Off, Alarm Only, Only, or Vibrate Only by pressing the Volume keys, see "Phone at A Glance", p. 10). 4. Service Alerts — To activate an alert. • ERI — Enhanced roaming indicator (ERI) displays the status of the mobile service (network service). The status can be "Verizon Network", "Extended Network", or "Roaming". See "Banner", p. 58. • Minute Beep — To sound an alert every minute while in a call. • Call Connect — To alert you when a call is connected. 5. Power On/Off — To enable or disable tones when your phone is turned on or off (this option only works when the master volume is not set to All Sounds Off, Alarm Only, or Vibrate Only by pressing the Volume keys, see "Phone at A Glance", p. 10). ■ Display Settings To modify the look and feel of the display. From Standby Mode, select MENU > Settings & Tools > Display Settings. 57 Banner To display a text banner In Standby Mode screen, select MENU > Settings & Tools > Display Settings > Banner and from the following: Personal Banner — Enter your own banner text of up to 18 characters. To change the text color, select Text Color. ERI Banner — Select On to display the status of the mobile network above your personal banner (network service). Backlight To conserve battery life, you can set the phone backlighting to dim when not used. To set the backlight duration, in Standby Mode, select MENU > Settings & Tools > Display Settings > Backlight and from the following: ft Display — To set how long the main display backlight remains on, scroll and select either 7 seconds, 15 Seconds, 30 Seconds, Always On, On, or Always Off and then press OK. Wallpaper ra Keypad — To set how long the keypad backlight remains on, scroll and select either 7 seconds, 15 Seconds, 30 Seconds, Seconds, Always On, On, or Always Off and then press OK. To set your phone to display a background picture (wallpaper), from Standby Mode, select MENU > Settings & Tools > Display Settings > Wallpaper > Main Screen > My Pictures or Fun Animations > an image or an animation and press OK, or Wallpaper > Front Screen > an image and press OK. Select View by pressing the Left Soft key to preview pr an image file as wallpaper. To browse for a new wallpaper, press the Right Soft key to select Get New. Display Themes To choose the color theme of the background screen, from Standby Mode, select MENU > Settings & Tools > Display Settings > Display Themes > Classic, Balloon, Bamboo, or Gumballs > SET. Press the Left Soft key to Preview a highlighted theme. Note: The default setting of Display Themes is Classic. 58 Main Menu Settings To set the layout of the menu screen, from Standby Mode, select MENU > Settings & Tools > Display Settings > Main Menu Settings > Tab, List, or Grid. Press the Left Soft key to Preview the highlighted layout and then List to return to the available layout options. Select SET to select the highlighted layout. Note: The default setting of Main Menu Settings is List. Dial Fonts To set the font size of the characters displayed when entering a phone number, from Standby Mode, select MENU > Settings & Tools > Display Settings > Dial Fonts and select Normal or Large. Clock Format ra ft To set the clock format on your phone’s e’s main display or front display, from Standby Mode, select MENU > Settings & Tools > Display Settings > Clock Format and select Main Clock > Analog Analog,, Large Analog, Analog, Digital 12 12, Large Digital 12, Digital 24, Large Digital 24, Classic,, or Off Off,, or Front Clock > Digital, Digital Analog, or Off. Note: The default settings of Main Clock and Front Clock are Large Digital 12 and Digital. ■ Phone Settings The Phone Settings menu allows you to designate specific network settings and operational modes for your phone. Airplane Mode Airplane Mode prevents your phone from receiving radio frequencies, while you can still use functions that do not require network service. To activate Airplane Mode, from Standby Mode select MENU > Settings & Tools > Phone Settings > Airplane Mode > On. Set Shortcuts Shortcuts allow you to quickly access certain functions. To access your shortcuts, in Standby Mode, press the Directional key Right. Select the shortcut from the available options. 59 For the default shortcuts, see "My shortcuts", p. 14. To change the shortcuts, do the following: 1. From Standby Mode, select Menu > Settings & Tools > Phone Settings > Set Shortcuts > Set My Shortcuts. 2. Select Shortcut 1, Shortcut 2, Shortcut 3, or Shortcut 4, and SET. 3. Select the application you want and select OK. To reset the assigned shortcut to the default setting, highlight the shortcut, and select the Right Soft key Options > Reset Shortcut # and press OK. To reset all of the assigned shortcuts to the default setting, select Options > Reset My Shortcuts and press OK. To move the shortcuts, do the following: 1. Press right on the Directional key in Standby Mode. 2. Select a shortcut and press the Right Soft key Move Move.. ra ft 3. Press up or down on the Directional key to move the highlighted shortcut, and select SAVE. Set Directional Keys To set applications and shortcuts to your Directional key when pressing Up, Left or Down, do the following: 1. From Standby Mode, select Menu > Settings & Tools > Phone Settings > Set Shortcuts > Set Directional Keys Keys.. 2. Scroll to and select the key to which you want to assign the application, and press SET. 3. Scroll to and select the application you want and OK. To reset the selected Directional key to the default setting, highlight the key, and press the Right Soft key Options > Reset (Direction) Key and press OK. To reset all Directional keys to their default setting, press the Right Soft key Options scroll to Reset Directional Keys and press OK. Voice Command Settings To change the settings for voice commands, from Standby Mode, select MENU > Settings & Tools > Phone Settings > Voice Command Settings, scroll to and choose from the available options: 60 1. Choice List — When your phone is unsure of the name or number you have said, a list of three choices is shown. To display the choices, select Automatic or Always On. To display only the best match, select Always Off. 2. Sensitivity — Use the Directional key to set how sensitive the voice recognition on your phone is. If many of your voice commands are rejected, press Down on the Directional key to adjust the setting towards Reject Less. If your phone is not recognizing your commands correctly and is activating the wrong names or numbers, press Up on the Directional key to adjust the setting towards Reject More. 3. Digit Dialing — Set how your phone recognizes your voice for each number on your keypad. ft • Adapt Digits — To allow your phone to recognize your voice for each number on your keypad. Your phone asks you to say a sequence of numbers, so they can be recorded and played back to you. You can rerecord them if you are unhappy with your pronunciation, or select OK to accept them. • Reset Digits — To restore the number sounds to the original factory settings, Digits. if you changed them using Adapt Digits. ra 4. Sound — Select Mode > Prompt Mode for the phone to prompt you for information, Readout Mode to prompt you and read the menu items as you navigate, or Tones Only Mode to prompt you with beeps only. Select Name Settings > Speed to change the speed that a name is played back, or Volume to change the volume that a name is played back. Select Speakerphone to turn the speakerphone on or off when the voice recognition is activated. 5. About — to view information about the voice signal. Language To set the default language of your phone menu and displays, from Standby Mode, select MENU > Settings & Tools > Phone Settings > Language > English or Español. Location Setting To share position information over the network, select MENU > Settings & Tools > Phone Settings > Location Setting. Select Location On to make position 61 information continually available, or E911 Only to make it available for emergency services only. Press OK to select. For calls to emergency numbers, location information may be used by the emergency operator to determine the position of the phone. This feature may not function in all areas or at all times. The functionality and accuracy of this feature are dependent on the network, satellite systems, the agency receiving the information and the fold position. Keeping the fold open helps strengthen the signal of the internal GPS antenna. Security To protect the device from unauthorized use, from Standby Mode, select MENU > Settings & Tools > Phone Settings > Security. Enter your security code which is by default the last four digits of your phone number and press OK. Select from the following options: ft Edit Codes — To change the security code. Restrictions — To prevent the use of certain functions. functions. Enter your security code which is by default the last four digits of your phone number and press OK. ra • Location Setting — To require the security code to access Location Setting, select Location Setting > Lock Setting. Setting. See "Location Setting", p. 61. • Calls — To restrict calls, select Incoming Calls or Outgoing Calls and select from the following: Allow All, All, Contacts Only Only,, or Block All. • Messages — To restrict messages, select Incoming Messages or Outgoing Messages and select from the following: Allow All or Block All. Phone Lock Setting — Select from Unlocked or On Power Up. For On Power Up, only emergency call, answering incoming calls, and functions of viewing personal information under ICE Contacts List are available. To disable this setting, select Unlocked. Lock Phone Now — To lock the phone with security code. When the phone is locked, you must enter your lock code to use the phone again. Restore Phone — To reset phone settings to factory defaults. System Select To set your phone to roam or search for another network when you are not in your home area, from Standby Mode, select MENU > Settings & Tools > Phone Settings > System Select and one of the following options: 62 Home Only — Make and receive calls in your home area only. Automatic A or Automatic B — Search for service in another network. The roaming rate applies when you are not in your home area. NAM Selection If your phone is registered with two phone numbers using number assignment modules (NAM) (for example, work and personal numbers), you can choose which number to show to the recipients of your calls. From Standby Mode, select MENU > Settings & Tools > Phone Settings > NAM Selection > NAM 1 or NAM 2. ■ Call Settings To define how to handle incoming and outgoing tgoing calls, from Standby Mode, select MENU > Settings & Tools > Call Settings. ft Answer Options ra To determine how calls mayy be answered on your phone. From Standby Mode, select MENU > Settings & Tools > Call Settings > Answer Options and one of the following: Flip Open — Answer the call by opening the flip (default setting). Any Key — Answer the call by pressing any key on the keypad. Auto With Handsfree — Answer the call automatically in about 5 seconds when a headset or hands-free car kit is attached to the device. Auto Retry To set the phone to automatically redial a number when the attempted call fails, from Standby Mode, select MENU > Settings & Tools > Call Settings > Auto Retry, select On and press OK. Occasionally, your network may experience heavy traffic resulting in a fast busy signal when you dial. With automatic retry, your phone redials the number (the number of times is specified by the network) and notifies you when the network is available. TTY Mode A phone with TTY/TDD (teletype/telecommunication device for the deaf) support can translate typed characters to voice. Voice can also be translated into characters and displayed on the TTY. To attach a TTY enabling you to communicate 63 with parties also using a TTY device, from Standby Mode, select MENU > Settings & Tools > Call Settings > TTY Mode > "Enabling TTY will disable headset audio" will appear on the display > OK and one of the following: TTY Full — Turn on full TTY capability. TTY + Talk — Turn on TTY in voice carry-over (VCO) mode. TTY + Hear — Turn on TTY in hearing carry-over (HCO) mode. TTY Off — Turn off TTY mode. Scroll to desired choice and press OK to select. HAC Mode ft Whining or buzzing noise may occur when some wireless phones are used near some hearing devices, such as hearing aids. ds. To reduce interference, from Standby Mode, select MENU > Settings & Tools > Call Settings > HAC Mode Mode, scroll to On and press OK to select. One Touch Dial ra To initiate a speed dial call by entering the speed dial digits, from Standby Mode, select MENU > Settings & Tools > Call Settings > One Touch Dial > On. If set to Off,, a long press on the speed dial numbers designated in your Contact List will not function. Otherwise, you need to first first press the speed dial numbers and press the Send key . See "Speed Dials", p. 42. Voice Privacy To protect the privacy of your phone conversation from other callers placing phone calls on the same CDMA network (network service), from Standby Mode, select MENU > Settings & Tools > Call Settings > Voice Privacy press OK to turn On. DTMF Tones DTMF (Dual Tone Multi-Frequency) tones or touch tones are sound designated to the keys on your phone keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voicemail box number and password. To set the key tone length, from Standby Mode, select MENU > Settings & Tools > Call Settings > DTMF Tones. Select Normal to send out a tone for a fixed period of 64 time no matter how long you press the key or Long to send out a continuous tone for as long as you keep the key pressed. Scroll to desired setting and press OK to set. ■ Memory To monitor the amount of phone memory you are using for file storage, from Standby Mode, select MENU > Settings & Tools > Memory > Phone Memory. Select from the following options: Phone Memory Usage — To display the total used and available memory (KB or MB, depends on the file size). My Pictures — To display the size of each picture file in My Pictures. My Sounds — To display the size of each sound file in My Sounds. Sounds ra ■ Phone Information ft To delete a picture or sound file, highlight ighlight a file, press the Right Soft key Options > Erase > scroll through list and mark selected selected files to be deleted and press the Left Soft key Done when finished. Press OK to erase the picture(s). To view information about your phone, from Standby Mode, select MENU > Settings & Tools > Phone Info. Info. The following information is shown: My Number — The active phone number. SW/HW Version — The current software and hardware version for your phone. Icon Glossary — The library of screen icons shown while on a call or when using features. Software Update — To check the status of your current software on your phone, select Status. To check if there are new software updates available for your phone, select Check New (This feature will not work if you are in roaming or emergency mode). ■ Setup Assistant To quickly set some phone settings, from Standby Mode, select MENU > Settings & Tools > Setup Assistant and you may select from the following: Set Ringtone — To set ringtones for incoming calls. Set Volume — To adjust the master volume of the phone by pressing the Directional keys Up or Down. 65 Set Alerts — To set the alert type for an incoming text message, picture message, voicemail, and emergency tone. See "Sounds Settings", p. 57. Set Wallpaper — To set wallpapers for the main or front screen. For details, see "Wallpaper", p. 58. Set Backlight — To set the backlight duration for the main display and keypad. See "Backlight", p. 58. Set Shortcuts — To set applications and shortcuts to your Up, Left or Down Directional keys. See "Set Directional Keys", p. 60. Set Clock Format — To set the clock format for the main or front clock. See "Clock Format", p. 59. ra ft Press the Left Soft key Done to return to the Settings & Tools menu. 66 13. Voice commands Voice commands transform your device into your own virtual personal assistant, letting you use your voice to make phone calls, look up contacts, and so on. Before using voice services, note the following: • Voice commands are language-dependent. They are not dependent on the speaker’s voice. • Voice commands are sensitive to background noise. Use them in a quiet environment. • Very short names are not accepted. Use long names, and avoid similar names for different numbers. ft Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances. ■ Activate and use Voice Commands ra To activate voice commands, from Standby Mode, select MENU > Settings & Tools Commands, or press the Voice Command Comma key > Tools > Voice Commands, (see "Phone at A Glance", p. 10). The fol following lowing options are displayed: Call— Say "Call" and then a name or a phone number from your Smith", "Call Tom Smith’s mobile", or "Call Contact List. For example, "Call Tom Smit 617 515 212". Send — Say "Send Message" and yo you are asked for the type of message. After choosing the message type, you are asked for the contact name or number. If you say a full-sentence command, such as "Send text to Tom", you are asked to confirm the message and give the contact number. The corresponding message editor opens. Lookup — Say "Lookup" and the name from your Contact List (for example, "Lookup Tom") to retrieve and display information of the contact. Go To
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Creator : MaggieKao Title : 11111.fm Create Date : 2008:07:01 17:52:24Z Creator Tool : FrameMaker 6.0 Modify Date : 2008:07:02 22:05:16+08:00 Metadata Date : 2008:07:02 22:05:16+08:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:f7926604-825c-4108-982a-457032bfafca Instance ID : uuid:553ad790-a911-46cf-a0b1-4352dd2846ba Has XFA : No Page Count : 78 Author : MaggieKaoEXIF Metadata provided by EXIF.tools