Microsoft RM-345 GSM/WCDMA cellular phone w/BT and WLAN User Manual Exhibit08 User Guide

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT and WLAN Exhibit08 User Guide

Contents

Manual

E66 User Guide44444444Issue 1CyanCyanMagentaMagentaYellowYellowBlackBlack
DECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this RM-345 product is in compliance with the essential requirementsand other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found atwww.nokia.com/phones/declaration_of_conformity/.© 2008 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia Original Enhancements logos, Eseries, E66, and Visual Radio are trademarks or registered trademarks of NokiaCorporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenamesof their respective owners.Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokiais prohibited.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved.This product includes software licensed from Symbian Software Ltd ©1998-2008. Symbian and Symbian OS are trademarks of SymbianLtd.Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.Portions of the Nokia Maps software are ©1996-2008 The FreeType Project. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information whichhas been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use inconnection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in thisdocument without prior notice.TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANYLOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS ORIMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATIONTO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIMEWITHOUT PRIOR NOTICE.CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide containsany limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,damages and liabilities of Nokia's licensors.The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer fordetails, and availability of language options.Export controlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversioncontrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or IndustryCanada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local servicefacility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes ormodifications not expressly approved by Nokia could void the user's authority to operate this equipment.44444444/Issue 1CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ContentsSafety...........................................................7About your device...........................................................7Network services.............................................................8Battery removing............................................................8E66 in brief...................................................9Key features.....................................................................9Keys and parts...............................................................10Key moves......................................................................11Set up your device......................................13Insert the SIM card and battery...................................13Charge the battery........................................................14Insert the memory card................................................14Eject the memory card..................................................15Connect the headset.....................................................15Attach the wrist strap...................................................15Antennas........................................................................15Get started.................................................17First start-up..................................................................17Home screen..................................................................17Menu...............................................................................18Switch.............................................................................18Common actions in several applications....................19Display indicators..........................................................20Volume control..............................................................21Memory..........................................................................21Write text.......................................................................22Further information......................................................24New from Eseries.......................................25Access tasks quickly......................................................25Home screen..................................................................25One-touch keys..............................................................26Nokia Calendar for Eseries............................................27Nokia Contacts for Eseries............................................28Multitasking...................................................................30Personalisation..........................................31Profiles...........................................................................31Select ringing tones......................................................31Personalise the home screen.......................................32Change the display theme............................................32Media..........................................................33Camera...........................................................................33Nokia Podcasting..........................................................34Music player...................................................................34Share online...................................................................36Recorder.........................................................................36Gallery............................................................................36RealPlayer......................................................................37Flash player....................................................................38Radio..............................................................................38Internet......................................................40Web................................................................................40Browse the intranet .....................................................41Download!......................................................................42Internet access points..................................................42CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Connect PC to web.........................................................44Messaging..................................................45Messaging folders.........................................................45E-mail messages............................................................46Write and send text messages....................................48Multimedia messages...................................................49Instant messaging........................................................49Messaging settings.......................................................50Phone.........................................................54Voice calls.......................................................................54Video calls......................................................................55Net calls..........................................................................561-touch dialing..............................................................58Voice mail......................................................................58Voice aid.........................................................................58Voice commands...........................................................59Push to talk....................................................................59Log..................................................................................60Travelling...................................................61About GPS and satellite signals...................................61Positioning settings......................................................62Maps...............................................................................62GPS data.........................................................................64Landmarks.....................................................................65Nokia Office Tools......................................66Active notes...................................................................66Calculator.......................................................................66File manager..................................................................67Quickoffice.....................................................................67Converter........................................................................67Zip manager...................................................................68PDF reader......................................................................68Printing .........................................................................68Clock...............................................................................69Notes..............................................................................70Connectivity...............................................71Fast downloading.........................................................71Data cable......................................................................71Bluetooth.......................................................................72Wireless LAN..................................................................74Modem...........................................................................76Connection manager....................................................76Security and data management................78Lock the device..............................................................78Memory card security...................................................78Encryption......................................................................79Fixed dialling.................................................................79Certificate manager......................................................80Back up data..................................................................81Application manager....................................................81Data synchronisation....................................................82Mobile VPN.....................................................................83Barcode reader..............................................................84Settings......................................................85General settings............................................................85Telephone settings.......................................................88Connection settings......................................................89Application settings......................................................91Shortcuts....................................................92General shortcuts..........................................................92CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Enhancements............................................93Battery and charger information...............94Battery and charger information................................94Nokia battery authentication guidelines...................95Care and maintenance...............................97Disposal..........................................................................98Additional safety information...................99Small children................................................................99Operating environment................................................99Medical devices..............................................................99Vehicles........................................................................100Potentially explosive environments.........................100Emergency calls...........................................................101CERTIFICATION INFORMATION (SAR)...........................101Index........................................................103CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SafetyRead these simple guidelines. Not following them maybe dangerous or illegal. Read the complete user guidefor further information.SWITCH ON SAFELYDo not switch the device on when wirelessphone use is prohibited or when it maycause interference or danger.INTERFERENCEAll wireless devices may be susceptible tointerference, which could affectperformance.SWITCH OFF IN RESTRICTED AREASFollow any restrictions. Switch the device offin aircraft, near medical equipment, fuel,chemicals, or blasting areas.QUALIFIED SERVICEOnly qualified personnel may install orrepair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements andbatteries. Do not connect incompatibleproducts.WATER-RESISTANCEYour device is not water-resistant. Keep itdry.About your deviceThe wireless device described in this guide is approvedfor use on the (E)GSM 850, 900, 1800, and 1900networks and UMTS 850/1900 HSDPA networks.Contact your service provider for more informationabout networks.When using the features in this device, obey all lawsand respect local customs, privacy and legitimaterights of others, including copyrights.Copyright protection may prevent some images, music,and other content from being copied, modified, ortransferred.Your device supports several methods of connectivity.Like computers, your device may be exposed to virusesand other harmful content. Exercise caution withmessages, connectivity requests, browsing, anddownloads. Only install and use services and othersoftware from trustworthy sources that offer adequatesecurity and protection against harmful software, suchas applications that are Symbian Signed or have passedthe Java Verified™ testing. Consider installing antivirus7CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
and other security software on your device and anyconnected computer.Your device may have preinstalled bookmarks and linksfor third-party internet sites. You may also access otherthird-party sites through your device. Third-party sitesare not affiliated with Nokia, and Nokia does notendorse or assume liability for them. If you choose toaccess such sites, you should take precautions forsecurity or content.Warning: To use any features in this device, otherthan the alarm clock, the device must be switched on.Do not switch the device on when wireless device usemay cause interference or danger.The office applications support common features ofMicrosoft Word, PowerPoint, and Excel (Microsoft Office2000, XP, and 2003). Not all file formats can be viewedor modified.Remember to make back-up copies or keep a writtenrecord of all important information stored in yourdevice.When connecting to any other device, read its userguide for detailed safety instructions. Do not connectincompatible products.The images in this guide may differ from your devicedisplay.Network servicesTo use the phone you must have service from a wirelessservice provider. Many of the features require specialnetwork features. These features are not available onall networks; other networks may require that youmake specific arrangements with your service providerbefore you can use the network services. Your serviceprovider can give you instructions and explain whatcharges will apply. Some networks may havelimitations that affect how you can use networkservices. For instance, some networks may not supportall language-dependent characters and services.Your service provider may have requested that certainfeatures be disabled or not activated in your device. Ifso, these features will not appear on your device menu.Your device may also have a special configuration suchas changes in menu names, menu order, and icons.Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL)that run on TCP/IP protocols. Some features of thisdevice, such as e-mail, browsing, and multimediamessaging (MMS), require network support for thesetechnologies.Battery removingAlways switch the device off and disconnect thecharger before removing the battery.8CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
E66 in briefModel number: Nokia E66-2 (RM-345).Hereinafter referred to as Nokia E66.Key featuresYour new Eseries device helps you manage yourbusiness and personal information in and out of office.Some of the key features are highlighted here:Switch from business to personal mode.Browse the internet, find blogs and receivenews feeds with Web.Listen to music with Music player.Get podcasts to your device with Podcasting.Add new applications to your device withDownload!Find points of interest with Maps.Access your e-mail while on the move.Stay up-to-date and plan your meetings withCalendar.Manage your business partners and free timefriends with the new Contacts application.Make calls using voice over IP services withInternet tel..Connect to WLAN with WLAN wiz..View documents, spreadsheets, andpresentations with Quickoffice.9CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Keys and parts1 — Power key2 — Earpiece3 — Light sensor4 — Selection key. Press the selection key to performthe function shown above it on the display.5 — Call key6 —  Press the key for a few seconds to switch onBluetooth connectivity. When writing text, press thekey and select More symbols to access specialcharacters.7 — Microphone8 —  Camera (video calls only)9 — Navi™ scroll key, hereafter referred to as the scrollkey. Press the scroll key to enter a selection, to scrollleft, right, up, and down on the display. A long pressleft, right, up, or down accelerates the scrolling.10 — End key. Press the end key to reject a call, endactive calls and held calls, and with a long keypress, enddata connections.11 — Backspace key. Press the key to delete items.12 — Shift key. When writing text, press and hold thekey and select the text with the scroll key. Press thiskey for a few seconds to toggle between the Silent andGeneral profiles.13 — Charger connector1 — Volume up key2 — Voice key. Press the voice key to mute and unmutethe active call. This key is also used in the Voicecommands and Push to talk applications.10CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
3 — Volume down key4 — Capture key5 — Release button6 — Headset connector7 — Micro-USB port8 — Infrared port1 — Home key2 — Contacts key3 — E-mail key4 — Calendar keyKey movesYour device rotates the display automatically when youmove it and responds to tapping and turning. Scroll keylights notify you of events, and the slide enablesanswering and ending calls and locking the keypad.Automatic display rotationIn all applications, the screen rotates automaticallyfrom portrait to landscape when you turn the device tothe left. For example, if you are browsing the web andturn the device to the left, the image rotatesaccordingly and changes to full screen. To display thecontrol and status panes, press either selection key.The image changes to full screen in RealPlayer,browser, and image viewer.To turn off the automatic display rotation or changingto full screen, select MenuToolsSettingsGeneralPersonalisationDisplayDisplayrotation or Turn to full view.Silence the deviceTo set calendar and clock alarms to snooze and tosilence incoming calls, turn the device face down.You can also silence the device by tapping it twice. Toturn on silencing by tapping, select MenuToolsSettingsGeneralPersonalisationTonesTap to silenceOn.To turn off silencing by tapping orturning, select MenuToolsSettingsGeneralPersonalisationTones Tapto silence or Turn to silence.11CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Scroll key lightsWhen you receive a message or miss a call, the scrollkey starts blinking to indicate the event. When thedisplay light turns off, the scroll key starts blinkingslowly.To set the length of time for blinking for missed eventsor to select of which events you want to be notified,select MenuToolsSettingsGeneralPersonalisationNotification light.To turn off slow blinking, select MenuToolsProfiles and a profile. Select PersonaliseBreathing light.Slide functionTo open or close the full-size keypad, push the slide upor down. To lock the keypad, close the slide. To unlockthe keypad, open the slide.Tip: To unlock the keypad withoutopening the slide, press the left andthen the right selection key.To answer a call, open the slide. To end thecall, close the slide, unless you have a headsetconnected to the device, or you selectOptions before closing the keypad.To change the slide settings, select MenuToolsSettingsGeneralSlide handling.The keypad of your device locks automatically toprevent the keys from being accidentally pressed. Tochange the period after which the keypad is locked,select MenuToolsSettingsGeneralSecurityPhone and SIM cardKeypad autolockperiod.12CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Set up your deviceSet up your E66 following these instructions.Insert the SIM card andbattery1. With the back of the device facing you, press therelease buttons (1) and slide the back cover off (2).2. If the battery is inserted, lift the battery in thedirection of the arrow to remove it.3. Insert the SIM card. Make sure that the contact areaon the card is facing the connectors on the deviceand that the bevelled corner is facing the top of thedevice.4. Insert the battery. Align the contacts of the batterywith the corresponding connectors on the batterycompartment and insert in the direction of thearrow.13CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
5. Slide the back cover back to place.Charge the battery1. Connect a compatible charger to a wall outlet.2. Connect the powercord to the device. Ifthe battery iscompletelydischarged, it maytake a while beforethe charging indicatorstarts scrolling.3. When the battery is fully charged, disconnect thecharger from the device, then from the wall outlet.Your battery has been precharged at the factory, butthe charging levels may vary. To reach the fulloperation time, charge the battery until it has beenfully charged according to the battery level indicator.Tip: If you have old compatible Nokia chargers,you can use them with the Nokia E66 byattaching the CA-44 charger adapter to the oldcharger. The adapter is available as a separateenhancement.Insert the memorycardMemory card may already be inserted in your device.Memory cards are also available as separateenhancements.1. With the back of the device facing you, press therelease buttons (1) and slide the back cover off (2).2. Insert the memory card in the slot with the contactarea first. Make sure that the contact area is facingthe connectors on the device.14CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
3. Push the card in until it locks into place.4. Close the back cover.Eject the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is beingaccessed. Removing the card in the middle of anoperation may damage the memory card as well as thedevice, and data stored on the card may be corrupted.1. Press the power key briefly, and select Removememory card.2. Press the release buttons and slide off the backcover.3. Press the end of the memory card to release it fromthe memory card slot.4. Close the back cover.Connect the headsetWarning: When you use the headset, your abilityto hear outside sounds may be affected. Do not use theheadset where it can endanger your safety.Connect the compatible headset to the headsetconnector of your device.Attach the wrist strapThread the wrist strap as shown, and tighten it.AntennasYour device may have internal and external antennas.As with any radio transmitting device, avoid touching 15CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
the antenna area unnecessarily while the antenna istransmitting or receiving. Contact with such anantenna affects the communication quality and maycause the device to operate at a higher power levelthan otherwise needed and may reduce the batterylife.16CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Get startedAfter you have set up your device, switch it on and startto explore what is new in Eseries.First start-up1. Press and hold the power key.2. If the device asks for a PIN code orlock code, enter the code, andselect OK.3. When prompted, enter the countryin which you are located and thecurrent date and time. To find yourcountry, enter the first letters of thecountry name. It is important toselect the correct country, becausescheduled calendar entries maychange if you change the countrylater and the new country is locatedon a different time zone. TheWelcome application opens.4. Select from the various options, orExit to close the application.To configure the various settings in your device, usethe wizards available on the home screen and in theSettings wizard application. When you switch thedevice on, it may recognise the SIM card provider andconfigure some settings automatically. You can alsocontact your service provider for the correct settings.You can switch the device on without inserting the SIMcard. The device starts up in the offline mode, and youcannot use the network-dependent phone functions.To switch the device off, press and hold the power key.Home screenFrom the home screen you can quickly access featuresthat you use the most, and see at a glance any missedcalls or new messages.17CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
You can define two separate home screens for differentpurposes, such as one screen to show your business e-mail and notifications, and another to show yourpersonal e-mail. This way, you do not have to seebusiness-related messages outside office hours.MenuSelect Menu.The menu is a starting pointfrom which you can open allapplications in the device oron a memory card.The menu containsapplications and folders,which are groups of similarapplications. Allapplications you install inthe device yourself are bydefault saved in theInstallations folder.To open an application,scroll to it, and press thescroll key.To view the applications in a list, select OptionsChange viewList view. To return to the grid view,select OptionsChange viewGrid view.To make the application icons and folders animated,select OptionsIcon animationOn.To view the memory consumption of differentapplications and data stored on the device or memorycard and to check the amount of free memory, selectOptionsMemory details.To create a new folder, select OptionsNewfolder.To rename a new folder, select OptionsRename.To rearrange the folder, scroll to the application youwant to move, and select OptionsMove. A checkmark is placed beside the application. Scroll to a newlocation, and select OK.To move an application to a different folder, scroll tothe application you want to move, and selectOptionsMove to folder, the new folder, and OK.To download applications from the web, selectOptionsDownload applications.SwitchSelect MenuToolsSwitch.You can transfer content, such as contacts, from acompatible Nokia device to your new Eseries deviceusing Bluetooth connectivity or infrared. The type ofcontent that can be transferred depends on the devicemodel. If the other device supports synchronisation,you can also synchronise data between the two devicesor send data from this device to the other device.When you transfer data from your previous device, itmay require you to insert the SIM card. Your new Eseriesdevice does not need a SIM card when transferringdata.Content is copied from the memory of the other deviceto the corresponding location in your device. Copying18CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
time depends on the amount of data to be transferred.You can also cancel and continue later.The necessary steps for data transfer may varydepending on your device, and whether you haveinterrupted data transfer earlier. The items that youcan transfer vary depending on the other device.Transfer content betweendevicesTo connect the two devices, follow the instructions onthe display. For some device models, the Switchapplication is sent to the other device as a message. Toinstall Switch on the other device, open the message,and follow the instructions on the display. On your newEseries device, select the content you want to copyfrom the other device.After the data transfer, you can save the shortcut withthe transfer settings to the main view to repeat thesame transfer later. To edit the shortcut, selectOptionsShortcut settings.Common actions inseveral applicationsYou can find the following actions in severalapplications:To change the profile, or switch off or lock the device,press the power key briefly.If an application consists ofseveral tabs (see figure),open a tab by scrolling rightor left.To save the settings that youhave configured in anapplication, select Back.To save a file, selectOptionsSave. There aredifferent saving optionsdepending on theapplication you use.To send a file, selectOptionsSend. You can send a file in an e-mail ormultimedia message, or using Bluetooth connectivityor infrared.To copy, press and hold the shift key, and select the textwith the scroll key. Press and hold the shift key, andselect Copy. To paste, scroll to where you want to pastethe text, press and hold the shift key, and selectPaste. This method may not work in applications thathave their own copy and paste commands.To select different items, such as messages, files, orcontacts, scroll to the item you want to select. SelectOptionsMark/UnmarkMark to select one itemor OptionsMark/UnmarkMark all to select allitems.Tip: To select almost all items, first selectOptionsMark/UnmarkMark all, thenselect the items you do not want, and OptionsMark/UnmarkUnmark.19CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To select an object (for example, an attachment in adocument) scroll to the object so that square markersappear on each side of the object.Display indicatorsThe device is being used in a UMTS network(network service).The battery charge level. The higher the bar,the stronger the charge in the battery.You have one or more unread messages in theInbox folder in Messaging.You have received new e-mail in the remotemailbox.There are messages waiting to be sent in theOutbox folder in Messaging.You have one or more missed phone calls.The keys of the device are locked.An alarm is active.You have selected the Silent profile, and thedevice does not ring for an incoming call ormessage.Bluetooth is active.Data is being transmitted using Bluetoothconnectivity. When the indicator is blinking,your device is trying to connect with anotherdevice.An infrared connection is active. If the indicatorblinks, your device is trying to connect to theother device, or the connection has been lost.A GPRS packet data connection is available(network service). If the icon is  , theconnection is active. If the icon is  , theconnection is on hold.An EGPRS packet data connection is available(network service). If the icon is  , theconnection is active. If the icon is  , theconnection is on hold.A UMTS packet data connection is available(network service). If the icon is  , theconnection is active. If the icon is  , theconnection is on hold.High-speed downlink packet access (HSDPA) issupported and available (network service). Theicon may vary between regions. If the icon is, the connection is active. If the icon is  , theconnection is on hold.20CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
You have set the device to scan for WLANs, anda WLAN is available.A WLAN connection is active in a network thatdoes not have encryption.A WLAN connection is active in a network thathas encryption.Your device is connected to a computer with aUSB data cable.The second phone line is being used (networkservice).All calls are forwarded to another number. Ifyou have two phone lines, a number indicatesthe active line.A headset is connected to the device.The connection to a headset with Bluetoothconnectivity has been lost.A hands-free car kit is connected to the device.A loopset is connected to the device.A text phone is connected to the device.Your device is synchronising.You have an ongoing push-to-talk connection.Your push-to-talk connection is in the do notdisturb mode, because the ringing type settingof your device is set to Beep once or Silent, oryou have an incoming or ongoing phone call.In this mode, you cannot make PTT calls.Volume controlTo adjust the earpiece volume during a phone call orthe volume of the media applications, use the volumekeys.MemoryThere are two types of memory into which you can savedata or install applications: device memory andmemory card.Free memoryTo see how much memory is currently in use, howmuch free memory remains, and how much memory isconsumed by each data type, select MenuOptionsMemory detailsPhone memory orMemory card.21CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Tip: To ensure that you have adequate memory,transfer data regularly to a memory card orcomputer, or use File manager to delete files youno longer need.After you install applications to a compatible memorycard, installation files (.sis, .sisx) remain in the devicememory. The files may use large amounts of memoryand prevent you from storing other files. To maintainsufficient memory, use Nokia PC Suite to back upinstallation files to a compatible PC, then use the filemanager to remove the installation files from thedevice memory. If the .sis file is a message attachment,delete the message from the Messaging inbox.Memory cardSelect MenuToolsMemory.If you cannot use a memory card in your device, youmay have the wrong type of memory card, the card maynot be formatted for your device, or the card has acorrupted file system. Your Nokia device supports theFAT16 and FAT32 file system for memory cards.MicroSDHCThis device uses microSD and microSDHCmemory cards.To ensure interoperability, use onlycompatible memory cards with this device.Check the compatibility of a memory card withits manufacturer or provider. Other memorycards than microSD and microSDHC cards are notcompatible with this device. Using an incompatiblememory card may damage the memory card as well asthe device, and data stored on the incompatible cardmay be corrupted.Use a memory cardTo format a memory card for your device, selectOptionsFormat memory card. When a memorycard is formatted, all data on the card is lostpermanently. Consult your retailer to find out if youmust format the memory card before you can use it.To change the name of the memory card, selectOptionsMemory card name.You can protect a memory card with a password toprevent unauthorised access. To set a password, selectOptionsSet password. The password can be up toeight characters long and is case-sensitive. Thepassword is stored in your device. You do not need toenter it again while you use the memory card in thesame device. If you use the memory card in anotherdevice, you are asked for the password. Not all memorycards support password protection.To remove the memory card password, selectOptionsRemove password. When you remove thepassword, the data on the memory card is notprotected against unauthorised use.To open a locked memory card, select OptionsUnlock memory card. Enter the password.Write textThe input methods provided in the device may varyaccording to different sales markets.22CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Traditional text input is shown on the top right of the display whenyou are writing text using traditional text input. and   indicate the selected case. indicates that the first letter of the sentence is writtenin uppercase and all the other letters are automaticallywritten in lowercase.   indicates the numbermode.To write text with the keypad, press a number key2-9 repeatedly until the desired character appears.There are more characters available for a number keythan are printed on the key. If the next letter is locatedon the same key as the present one, wait until thecursor appears, and enter the letter.To insert a number, press and hold the number key.To switch between the upper and lower case mode andthe number mode, press #.To erase a character, press the backspace key. Press andhold the backspace key to erase more than onecharacter.To access the most common punctuation marks, pressthe 1 key. Press 1 repeatedly to reach the desiredpunctuation mark.To add special characters, press *. Scroll to the desiredcharacter and press the scroll key.To insert a space, press 0. To move the cursor to thenext line, press 0 three times.To switch between the different character cases, press#.Predictive text input1. To activate predictive text input, press # twicequickly. This activates predictive text input for alleditors in the device. The indicator   is shownon the display.2. To write the desired word, press 2-9. Press each keyonly once for one letter.3. When you have finished writing the word and it iscorrect, scroll right to confirm it, or press 0 to adda space.If the word is not correct, press * repeatedly to viewthe matching words the dictionary has found.If the ? character is shown after the word, the wordyou intended to write is not in the dictionary. Toadd a word to the dictionary, select Spell, enter theword (up to 32 letters) using traditional text input,and select OK. The word is added to the dictionary.When the dictionary is full, the new word replacesthe oldest added word.Write the first half of a compound word; to confirm it,scroll right. Write the last part of the compound word.To complete the compound word, press 0 to add aspace.To switch predictive text input off for all editors in thedevice, press # twice quickly.23CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Change the writinglanguageWhen you are writing text, you can change the writinglanguage. For example, if you press the 6 keyrepeatedly to reach a specific character, changing thewriting language gives you access to characters in adifferent order.If you are writing text using a non-Latin alphabet andwant to write Latin characters, for example e-mail orweb addresses, you may need to change the writinglanguage. To change the writing language, selectOptionsWriting language, and a writinglanguage that uses Latin characters.Further informationExtended user guideAn extended version of this user guide is available onthe Nokia web site. Some applications or functions areexplained only in the extended user guide.Instructions in your deviceTo read instructions for the current view of the openapplication, select OptionsHelp.To browse the help topics and conduct searches, selectMenuHelpHelp. You can select categories forwhich you want to see instructions. Select a category,such as Messaging, to see what instructions (helptopics) are available. While you are reading the topic,scroll left or right to see the other topics in thatcategory.To switch between the application and help, press andhold the home key.TutorialThe tutorial provides you information about yourdevice and shows you how to use it. Select MenuHelpTutorial.24CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
New from EseriesYour new Eseries device contains new versions of theCalendar and Contacts applications, as well as a newhome screen.Access tasks quicklyWhenever you see the icon on the home screen, orin the Contacts or Calendarapplications, scroll right toaccess a list of availableactions. To close the list,scroll left.When you navigate in theseapplications, to go back tothe previous level, scroll left.Home screenFrom the home screen you can quickly access featuresthat you use the most, and see at a glance any missedcalls or new messages.Navigate in the home screenTo access the home screen, press the home key briefly.The home screen consists of:ವapplication shortcuts (1)To access an applicationquickly, scroll to itsshortcut and press thescroll key.ವinformation area (2) Tocheck an item displayedin the information area,scroll to the item andpress the scroll key.ವnotifications (3) To viewthe notifications, scroll toa box. Each box is only visible if there are items in it.To hide the boxes, press the backspace key.To define what kind of items and shortcuts you wantto see on the home screen, and to set the appearanceof the home screen, select MenuToolsModes.Work on the home screenTo call the contact, press the call key. 25CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To set off the contact search, select OptionsContactsearch off.To check your received messages, scroll to the messagebox in the notification area. To read a message, scrollto it and press the scroll key. To access other tasks,scroll right.To view your missed calls, scroll to the calls box in thenotification area. To return a call, scroll to a call andpress the call key. To send a text message to a caller,scroll to a call, scroll right and select Send text msg.from the list of available actions.To listen to your voice mail, scroll to the voice mail boxin the notification area. Scroll to the desired voicemailbox and press the call key to call it.Switch home screensYou can define two home screen modes for differentpurposes, such as one mode to show your business e-mail and notifications, and another to show yourpersonal e-mail. This way, you do not have to seebusiness-related messages outside office hours.Your operator may have set you a third home screenwith operator-specific items.To change from one home screen mode to another,scroll to   and press the scroll key.One-touch keysWith the One-touch keys you can access applicationsand tasks quickly. Each key has been assigned anapplication and a task. To change these, select MenuToolsSettingsGeneralPersonalisationOne-touch keys. Your network operator may haveassigned applications to the keys, in which case youcannot change them.Home keyTo access the home screen, press the home key briefly.Press the home key briefly again to access the menu.To view the list of active applications, press the homekey for a few seconds. When the list is open, press thehome key briefly to scroll the list. To open the selectedapplication, press the home key for a few seconds, orpress the scroll key. To close the selected application,press the backspace key.Leaving applications running in the backgroundincreases the demand on battery power and reducesthe battery life.Contacts keyTo open the Contacts application, press the contactskey briefly.To create a new contact, press the contacts key for afew seconds.Calendar keyTo open the Calendar application, press the calendarkey briefly.26CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To create a new meeting entry, press the calendar keyfor a few seconds.E-mail keyTo open your default mailbox, press the e-mail keybriefly.To create a new e-mail message, press the e-mail keyfor a few seconds.Nokia Calendar forEseriesSelect MenuOfficeCalendar.Create and view scheduled events and appointments,and switch between different calendar views.Calendar viewsYou can switch between the following views:ವMonth view shows the current month and thecalendar entries of the selected day in a list.ವWeek view shows the events for the selected weekin seven day boxes.ವDay view shows the events for the selected daygrouped into time slots according to their startingtime.ವTo-do view shows all to-do items.ವAgenda view shows the events for the selected dayin a list.To change the view, select OptionsChange viewand the desired view.Tip: To open the week view, scroll to a weeknumber and press the scroll key.To move to the next or the previous day in month,week, day, and agenda views, scroll right or left.To change the default view, select OptionsSettingsDefault view.View calendar informationIn the month view, calendarentries are marked with atriangle. Anniversary entriesare also marked with anexclamation mark. Theentries of the selected dayare shown in a list.To open calendar entries,open a calendar view, scrollto an entry, and press thescroll key.Create calendar entriesYou can create the following types of calendar entries:ವMeeting entries remind you of events that have aspecific date and time. 27CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವMemo entries are related to the whole day but notto a specific time of the day.ವAnniversary entries remind you of birthdays andspecial dates. They refer to a certain day but not aspecific time of the day. Anniversary entries arerepeated every year.ವTo-do entries remind you of a task that has a duedate but not a specific time of the day.To create a calendar entry, scroll to a date, selectOptionsNew entry and the entry type.Tip:  To create a meeting entry, start enteringthe subject.Create meeting, memo, anniversary, or to-doentries1. Enter the subject.2. For meeting entries, enter the start and end times,or select All-day event.3. For meeting and memo entries, enter the start andend dates. For anniversary entries, enter the dateand for to-do entries, enter the due date.4. For meeting entries, enter the location.5. For meeting, anniversary, and to-do entries, youcan set an alarm.6. For recurring meeting entries, set the recurrencetime.7. For to-do entries, set the priority. To set the priorityfor meeting entries, select OptionsPriority.8. For memo, anniversary, and to-do entries, definehow the entry is handled during synchronisation.Select Private to hide the entry from viewers if thecalendar is available online, Public to make theentry visible to viewers, or None to not copy theentry to your computer.9. Enter a description.To send the entry, select OptionsSend.Calendar settingsSelect OptionsSettings.To change the alarm tone, select Calendar alarmtone.To change the view displayed when you open thecalendar, select Default view.To change the first day of the week, select Week startson.To change the week view title, select Week viewtitle and Week number or Week dates.Nokia Contacts forEseriesSelect MenuCommunic.Contacts.Save and update contact information, such as phonenumbers, home addresses, or e-mail addresses of yourcontacts. You can add a personal ringing tone or athumbnail image to a contact. You can also createcontact groups, which allow you to communicate withseveral contacts at the same time, and send contact28CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
information (business cards) to or receive it fromcompatible devices.Whenever you see the   icon, scroll right to access alist of available actions. To close the list, scroll left.Add contactsSelect OptionsNew contact, and enter thecontact's information.To copy a contact's information from the memory card,select OptionsCopyFrom memory card.Contact groupsIf you want to make conference calls to the group,define also the following:ವConf. service number — Enter the conference callservice number.ವConf. service ID — Enter the conference call IDnumber.ವConf. service PIN — Enter the conference call PINcode number.To make a conference call to the group, select thegroup, scroll right, and select Call conf. service fromthe list of available actions.Search for contactsTo search for contacts, start entering the contact'sname in the search field.Manage contacts directoriesYou can install contacts directories from the Download!application.To change the contacts directory, scroll to the top ofthe names list, press the scroll key, and select from thelist of available directories.To organise contacts directories, select OptionsOrganise contact lists and a directory. Scroll up tomove it to the desired place.Add ringing tones forcontactsYou can set a ringing tone for a contact or contactgroup. The ringing tone sounds when the contact callsyou.To add a ringing tone for contacts, open a contact,select OptionsRinging tone and a ringing tone.To add a ringing tone for contact groups, select acontact group, OptionsGroupRinging tone anda ringing tone.To remove the assigned ringing tone, select Defaulttone from the list of ringing tones.Change contacts settingsSelect OptionsSettings.To change the way the contacts' names are displayed,select Name display.29CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To select which contacts directory opens when youopen the Calendar application, select Default contactlist.MultitaskingYou can have several applications open at the sametime. To switch between active applications, press andhold the home key, scroll to an application, and pressthe scroll key. To close the selected application, pressthe backspace key.Example:  When you have an active phone calland want to check your calendar, press the homekey to access the menu, and open the Calendarapplication. The phone call remains active in thebackground.Example:  When you are writing a message andwant to check a web site, press the home key toaccess the menu, and open the Web application.Select a bookmark or enter the web addressmanually, and select Go to. To return to yourmessage, press and hold the home key, scroll tothe message and press the scroll key.30CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
PersonalisationYou can personalise your device by adjusting thevarious tones, background images, and screen savers,for example.ProfilesSelect MenuToolsProfiles.You can adjust and customise the ringing tones, alerttones, and other device tones for different events,environments, or caller groups. The profile currently inuse is shown at the top of the display on the homescreen. However, if the active profile is General, onlytoday's date is shown.To create a new profile, select OptionsCreatenew, and define the settings.To customise a profile, select a profile and OptionsPersonalise.To change a profile, select a profile and OptionsActivate. The Offline profile prevents your device fromaccidentally switching on, sending or receivingmessages, or using wireless LAN, Bluetooth, GPS, or FMradio; it also closes any internet connection that maybe in operation when the profile is selected. The Offlineprofile does not prevent you from establishing awireless LAN or Bluetooth connection at a later time,or from restarting the GPS or FM radio, so comply withany applicable safety requirements when establishingand using these features.To delete a profile that you created, select OptionsDelete profile. You cannot delete the predefinedprofiles.Select ringing tonesTo set a ringing tone for a profile, select OptionsPersonaliseRinging tone. Select a ringing tonefrom the list, or select Download sounds to open abookmark folder containing a list of bookmarks fordownloading tones using the browser. Anydownloaded tones are saved to Gallery.To play the ringing tone for a selected contact grouponly, select OptionsPersonaliseAlert for, andselect the desired group. Phone calls coming fromoutside that group have a silent alert.To change the message tone, select OptionsPersonaliseMessage alert tone.31CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Personalise the homescreenSelect MenuToolsModes.To change the name of the current home screen, selectMode name.To select which applications and notifications youwant to see on the home screen, select Home screenapplications.To change the theme of the home screen currently inuse, select Theme.To change the background image of the home screencurrently in use, select Wallpaper.To change from one home screen to another, selectSwitch mode.Change the displaythemeSelect MenuToolsThemes.To change the theme used in all applications, select theGeneral folder.To change the theme used in the main menu, select theMenu view folder.To change the theme for a particular application, selectthe application-specific folder.To change the background image of the home screen,select the Wallpaper folder.To select an image or write a text for the screen saver,select the Power saver folder.32CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
MediaYour device contains a variety of media applications forboth business and leisure time use.CameraSelect MenuMediaCamera.Capture an imageYour device supports an image capture resolution ofup to 2048 x 1536 pixels. The image resolution in thisguide may appear different.To capture an image, use the display as a viewfinderand press the scroll key. The device saves the image inGallery.To zoom in or out before capturing an image, scroll upor down. This function is available only when thetoolbar is not shown.The toolbar provides you with shortcuts to differentitems and settings before and after capturing an imageor recording a video. Scroll to a toolbar item and pressthe scroll key.   Switch between the video mode and the imagemode.   Select the scene.   Select the flash mode (images only).   Activate the self-timer (images only).   Activate the sequence mode (images only).   Select a colour effect.   Show or hide the viewfinder grid (images only).   Adjust the white balance.   Adjust the exposure compensation (images only).The available options vary depending on the capturemode and view you are in. The settings return to thedefault after you close the camera.Record videos1. If the camera is in the image mode, select the videomode from the toolbar.2. To start recording, press the scroll key.3. To pause recording at any time, select Pause. SelectContinue to resume recording.4. To stop recording, select Stop. The video clip isautomatically saved in Gallery. The maximum 33CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
length of the video clip depends on the availablememory.Nokia PodcastingSelect MenuMediaPodcasting.Download podcasts to your device and listen them.Play and manage podcastsPodcasting delivers audio or video content over theinternet for playback on mobile devices and PCs.With the Nokia Podcasting application, you can search,discover, subscribe, and download podcasts over theair; and play, manage, and share podcasts with yourdevice.Define the connection and downloading settingsbefore using the application. Select OptionsSettingsConnection and Download.To search for new podcast episodes to subscribe to,select Directories.To search for podcasts using keywords and podcastshow titles, select Search.To display the available episodes from the selectedpodcast, open the Podcasts folder and select Open.To download the selected episode, select Download.To play the downloaded episode, select Play.To update the selected podcast or marked podcasts, fora new episode, select OptionsUpdate.To open the web site of the podcast (network service),select OptionsOpen web page.Some podcasts provide the opportunity to interactwith the creators by commenting and voting. Toconnect to the internet to do this, select OptionsView comments.Search podcastsSearch helps you find podcasts by keyword or title.The search engine uses the podcast search service youset up in PodcastingOptionsSettingsConnectionSearch service URL.To search for podcasts, select Search, and enter thedesired keywords.Tip: Search looks for podcast titles and keywordsin descriptions, not specific episodes. Generaltopics, such as football or hip-hop, usually givebetter results than a specific team or artist.To subscribe to selected channels and add them to yourpodcasts, select Subscribe.To start a new search, select OptionsNew search.To see the details of a podcast, select OptionsDescription.Music playerWarning: Listen to music at a moderate level.Continuous exposure to high volume may damage yourhearing. Do not hold the device near your ear when the34CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
loudspeaker is in use, because the volume may beextremely loud.Select MenuMediaMusic player.Music player supports files formats such as AAC, AAC+,eAAC+, MP3, and WMA. Music player does notnecessarily support all features of a file format or allthe variations of file formats.You can also use Music player to listen to podcastepisodes. Podcasting is a method for delivering audioor video content over the internet using either RSS orAtom technologies for playback on mobile devices andPCs.You can transfer music from other compatible devicesto your device. See "Transfer music from PC", p. 36.Play a song or a podcastepisodeTo add all available songs and podcasts to the musiclibrary, select OptionsRefresh.To play a song or a podcast episode, select Music orPodcasts and the desired category, then scroll to thesong or podcast episode and press the scroll key.To pause playback, press the scroll key; to resume,press the scroll key again. To stop playback, scrolldown.To fast forward or rewind, press and hold the scroll keyto the right or left.To go to the next item, scroll right. To return to thebeginning of the item, scroll left. To skip to the previousitem, scroll left again within 2 seconds after a song orpodcast has started.To modify the tone of the music playback, selectOptionsEqualiser.To modify the balance and stereo image or to enhancebass, select OptionsAudio settings.To return to the home screen and leave the playerplaying in the background, press the end key.PlaylistsTo view and manage playlists, select MusicPlaylists.To create a new playlist, select OptionsCreateplaylist.To add songs to the playlist, select the song andOptions Add to a playlistSaved playlist or Newplaylist.To reorder songs in a playlist, scroll to the song youwant to move, and select OptionsReorder list.Nokia Music Store Select MenuMediaMusic store.In the Nokia Music Store (network service) you cansearch, browse, and purchase music to download toyour device. To purchase music, you need to registerfor the service.To check the Nokia Music Store availability in yourcountry, visit www.nokia.com/music. 35CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To find more music in the different categories, selectOptionsFind in Music store.To select the access point to use with the Music Store,select Default acc. pt..Transfer music from PCTo transfer music from your PC, connect your device tothe PC with a compatible USB data cable or Bluetoothconnectivity. If you are using the USB cable, select Massstorage as the connection mode. Make sure that acompatible memory card is inserted in the device.You can also use Windows Media Player to synchronisemusic between your device and PC.Share onlineSelect MenuMediaShare online.You can share images and video clips in compatibleonline albums, blogs, or in other compatible onlinesharing services on the web. You can upload content,save unfinished posts as drafts and continue later, andview the content of the albums. The supported contenttypes may vary depending on the service provider.To share files online, you must have an account withan online image sharing service. You can usuallysubscribe to such a service on the web page of yourservice provider. Contact your service provider for moreinformation.Share images onlineTo upload a file from Gallery to the online service, selectMenuGallery, select the desired file and OptionsSendPost to web.RecorderSelect MenuMediaRecorder.With Recorder, you can record up to 60 minutes of avoice memo, save the voice recording as a sound clip,and play the sound clip. Recorder supports the AMR fileformat.GallerySelect MenuMediaGallery.Use Gallery to access and use different types of media,including images, videos, music, and sounds. Allviewed images and videos, and all received music andsounds are automatically saved to Gallery. Sound clipsare opened in the Music player, and video clips andstreaming links in the RealPlayer application. Imagesare opened in the image viewer.Work with media files andfoldersTo open a file or a folder, scroll to it, and press the scrollkey.36CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To create a new folder, select a file and then selectOptionsOrganiseNew folder. You cannotcreate folders within folders.To copy or move files, select a file and OptionsOrganiseMove to folder,New folder,Move tomemory card,Copy to memory card,Copy to phonemem., or Move to phone mem..To download files into Gallery using the browser, selectDownl. graphics,Downld. videos,Downld. tracks,or Downld. sounds. The browser opens, and you canchoose a bookmark or enter the address for thedownload site.To search for a file, select OptionsFind. Write theitem you are searching for. Files that match the searchare shown.View imagesTo open an image for viewing, select OptionsOpen.To open the next or previous image for viewing, scrollright or left.To enlarge the image on the display, select OptionsZoom in. To reduce the image on the display, selectZoom out.To view the image in full screen size, select OptionsFull screen. To return to normal view, select OptionsNormal screen.To rotate the image, select OptionsRotate. SelectRight to rotate the image clockwise by 90 degrees, orselect Left to rotate the image counterclockwise by 90degrees.RealPlayerSelect MenuMediaRealPlayer.RealPlayer plays video clips and audio files that arestored in the device memory or on a memory card,transferred to your device from an e-mail message ora compatible computer, or streamed to your deviceover the web. Supported formats include MPEG-4, MP4(not streaming), 3GP, RV, RA, AMR, and Midi. RealPlayerdoes not necessarily support all variations of a mediafile format.Play video clips and streamlinksWarning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To play a video clip or audio file, select OptionsOpenMost recent clips to play one of the six clipsyou most recently played, or Saved clip to play a clipor open a web link. Select Play.To play streaming media, select a web link that pointsto a clip, and select Play; or connect to the web, browseto a video clip or audio file, and select Play. RealPlayerrecognises two kinds of links: an rtsp:// URL and anhttp:// URL that points to a RAM file. Before the contentbegins streaming, your device must connect to a web37CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
site and buffer the content. If a network connectionproblem causes a playback error, RealPlayer attemptsautomatically to reconnect to the internet access point.To adjust the volume during playback, use the volumekeys.To fast-forward during playback, scroll up and hold. Torewind during play, scroll down and hold.To stop the playback or streaming, select Stop.Buffering or connecting to the streaming site stops, theplayback of the clip stops, and the clip rewinds to thebeginning.To download video clips from the web, selectOptionsDownload videos.To view the video clip in full-screen size, selectOptionsPlay in full screen. Full screen increasesthe size of the video to cover the maximum video areapossible while the aspect ratio is maintained.Tip: To switch between the normal screen andfull screen quickly, press 2 on the keypad.Flash playerSelect MenuMediaFlash Player.With Flash player, you can view, play, and interact withflash files made for mobile devices.RadioSelect MenuMediaRadio.The quality of the radio broadcast depends on thecoverage of the radio station in that particular area.The FM radio depends on an antenna other than thewireless device antenna. Attach a compatible headsetor enhancement to the device for the FM radio tofunction properly.Listen to the radioWarning: Listen to music at a moderate level.Continuous exposure to high volume may damage yourhearing. Do not hold the device near your ear when theloudspeaker is in use, because the volume may beextremely loud.To search for a station, select   or  . To set thefrequency manually, select OptionsManualtuning.To view available stations based on location, selectOptionsStation directory (network service).To save the current station to your station list, selectOptionsSave station.To select a previously saved radio station, select   or.To adjust the volume, use the volume keys.To switch from headset use to listening to the radiothrough the loudspeaker, select OptionsActivateloudspeaker.38CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To return to the home screen and leave the FM radioplaying in the background, select OptionsPlay inbackground.View visual contentTo check availability and costs, and to subscribe to theservice, contact your service provider.Before you can view visual content, you must have aninternet access point defined at MenuToolsSettingsConnectionAccess points.1. To view available visual content for a tuned station,select OptionsStart visual service. If the visualradio service ID has not been saved for the station,enter it, or select Retrieve to search for it in thestation directory (network service).2. Select the location nearest to you from the stationdirectory. If your device finds a station that matchesthe tuned frequency, its visual service ID isdisplayed. To view the visual content, select OK.39CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
InternetWith your new Eseries device you can browse both theinternet and your company's intranet, and downloadand install new applications to your device. You canalso use your device as a modem and connect your PCto the internet.WebSelect MenuWeb.To browse the web (network service), you need toconfigure the internet access point settings. If you areusing a GPRS connection, your wireless network mustsupport GPRS, and the service must be activated foryour SIM card.Tip: You may receive the internet access pointsettings from your service provider as a specialtext message or from the service provider's webpages. You can also enter the internet accesspoint settings manually. See "Internet accesspoints", p. 42.Check the availability of services, pricing, and fees withyour service provider. Service providers also give youinstructions on how to use their services.Connection securityIf the security indicator (  ) is displayed during aconnection, the data transmission between the deviceand the internet gateway or server is encrypted. Thesecurity icon does not indicate that the datatransmission between the gateway and the contentserver (or place where the requested resource isstored) is secure. The service provider secures the datatransmission between the gateway and the contentserver.Security certificates may be required for some services,such as banking services. You are notified if the identityof the server is not authentic or if you do not have thecorrect security certificate in your device. For moreinformation, contact your service provider.Browse the webTo browse the web, select a bookmark or enter the webaddress manually, and select Go to. Use only servicesthat you trust and that offer adequate security andprotection against harmful software.Tip: When you start to enter the address, theaddresses of the pages you have previouslyvisited that match your input are displayed. To40CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
open a page, scroll to its address, and press thescroll key.To move on a web page, use the scroll key, which isshown as a pointer on the page. When you move thepointer over a link, the pointer changes into a hand.Press the scroll key to open the link. On a web page,new links usually appear underlined in blue andpreviously visited links in purple. Images that act aslinks have a blue border around them.The addresses of the pages you visit are saved in theAuto. bookmarks folder.BookmarksTo view a bookmarked web page, scroll to thebookmark, and press the scroll key.To browse to another web page, select OptionsNavigation optionsGo to web address, enter thepage address, and select Go to.To add a bookmark, select OptionsBookmarkmanagerAdd bookmark.To organise your bookmarks, select OptionsBookmark manager in the Web main view. You canmove and edit bookmarks, and create new folders.Clear the cacheA cache is a memory location that is used to store datatemporarily. If you have tried to access or haveaccessed confidential information requiringpasswords, empty the cache after each use. Theinformation or services you have accessed are storedin the cache.To empty the cache, select OptionsClear privacydataClear cache.End a connectionTo end the connection and view the browser pageoffline, select OptionsToolsDisconnect. To endthe connection and close the browser, selectOptionsExit.Web settingsSelect MenuWebOptionsSettings.The Web settings are divided into four groups:ವGeneral contains access point and home pagerelated settings.ವPage contains imaging, audio, and pop-up settings.ವPrivacy contains settings related your privacy.ವWeb feeds contains settings related to web feedsand blogs.Browse the intranetSelect MenuOfficeIntranet.41CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To browse your company's intranet, you must create acompany-specific VPN policy. Select MenuToolsSettingsConnectionVPN.To connect to the intranet, open the Intranetapplication, select the connection method andOptionsConnect.To define which VPN profile to use in the connection,select OptionsUse other VPN policy.To define the settings for the intranet connection,select OptionsSettings.Download!Select MenuDownload!.With Download! (network service), you can browse,download, and install items, such as latest applicationsand related documents, to your device from the web.The items are categorised under catalogs and foldersprovided by Nokia or independent service providers.Some items may be chargeable, but you can usuallypreview them free of charge.Download! uses your network services to access themost updated content. For information on additionalitems available through Download!, contact yourservice provider, or the supplier or manufacturer of theitem.Only install and use applications and other softwarefrom sources that offer adequate security andprotection against harmful software.Manage itemsTo open an item or view the content of a folder orcatalogue, scroll to it, and press the scroll key.To buy the selected item, select OptionsBuy.To download an item that is free of charge, selectOptionsGet.To search for an item, select OptionsSearch.To adjust the settings, select OptionsSettings.To view the list of downloaded items, select OptionsMy items.Internet access pointsAn internet access point is a collection of settings,which define how the device creates a data connectionto the network. To use e-mail and multimedia servicesor to browse web pages, you must first define accesspoints for these services.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.Set up an internet accesspoint for packet data (GPRS)1. Select MenuToolsSettingsConnectionAccess points.2. Select OptionsNew access point to create anew access point, or select an existing access point42CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
from the list and then Options Duplicate accesspoint to use the access point as a basis for the newone.3. Define the following settings.ವConnection name — Enter a descriptive namefor the connection.ವData bearer — Select Packet data.ವAccess point name — Enter the name for theaccess point. The name is usually provided byyour service provider.ವUser name — Enter your user name if requiredby the service provider. User names are oftencase-sensitive and provided by your serviceprovider.ವPrompt password — Select Yes to enter yourpassword each time you log into a server or Noto save the password in your device memory andautomate the login.ವPassword — Enter your password if required bythe service provider. The password is often case-sensitive and provided by the service provider.ವAuthentication — Select Secure to send yourpassword always encrypted, or Normal to sendyour password encrypted when possible.ವHomepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.4. After defining the settings, select OptionsAdvanced settings to define the advancedsettings or Back to save the settings and exit.Set up an access point forWLAN manually1. Select MenuToolsSettingsConnectionAccess points.2. Select OptionsNew access point to create anew access point, or select an existing access pointfrom the list and then OptionsDuplicate accesspoint to use the access point as a basis for the newone.3. Define the following settings.ವConnection name — Enter a descriptive namefor the connection.ವData bearer — Select Wireless LAN.ವWLAN network name — To enter the serviceset identifier (SSID), that is, the name thatidentifies the specific WLAN, select Entermanually. To select the network from theWLANs in range, select Search for networks.ವNetwork status — Select Hidden if the networkyou are connecting to is hidden or Public if it isnot hidden.ವWLAN network mode — If you selectInfrastructure, devices can communicate witheach other and with wired LAN devices througha WLAN access point. If you select Ad-hoc,devices can send and receive data directly witheach other, and no WLAN access point is needed.ವWLAN security mode — You must select thesame security mode that is used in the WLANaccess point. If you select WEP (wired equivalentprivacy), 802.1x, or WPA/WPA2 (Wi-Fi protectedaccess), you must also configure the relevant43CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
additional settings. See the device help for moreinformation.ವWLAN security settings — Edit the securitysettings for the selected security mode.ವHomepage — Enter the web address of the pageyou want to display as the home page when youuse this access point.To set up a WLAN access point automatically, use theWLAN wizard. Select MenuConnectivityWLANwiz..Connect PC to webYou can use your device to connect your PC to the web.1. Connect the data cable to the USB connectors ofyour device and your PC.2. Select Connect PC to Net. The necessary Windowssoftware is installed to your PC.3. Accept the installation in your PC. If asked, acceptalso the connection. When the connection betweenyour device and PC is established, the internetbrowser of your PC opens.You must have administrator rights to your PC, and theautorun option enabled in the PC. If not, run thesetup.exe file from the CD-ROM drive of your PC.44CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
MessagingSelect MenuCommunic.Messaging.In Messaging (network service), you can send andreceive text messages, multimedia messages, audiomessages, and e-mail messages. You can also receiveweb service messages, cell broadcast messages, andspecial messages containing data, and send servicecommands.Before sending or receiving messages, you may needto do the following:ವInsert a valid SIM card in the device and be locatedin the service area of a cellular network.ವVerify that the network supports the messagingfeatures you want to use and that they are activatedon your SIM card.ವDefine the internet access point settings on thedevice. See "Internet access points", p. 42.ವDefine the e-mail account settings on the device. See"E-mail account settings", p. 51.ವDefine the text message settings on the device. See"Text message settings", p. 50.ವDefine the multimedia message settings on thedevice. See "Multimedia messagesettings", p. 50.The device may recognise the SIM card provider andautomatically configure some of the message settings.If not, you may need to define the settings manually;or contact your service provider to configure thesettings.Messaging foldersMessages and data received using Bluetoothconnectivity or infrared are stored in the Inbox folder.E-mail messages are stored in Mailbox. Messages thatyou have been writing can be stored in the Draftsfolder. Messages that are waiting to be sent are storedin the Outbox folder, and messages that have beensent, excluding Bluetooth and infrared messages, arestored in the Sent folder.Tip: Messages are placed in Outbox, for example,when your device is outside network coverage.You can also schedule e-mail messages to besent the next time you connect to your remotemailbox.Note: The message sent icon or text on your devicescreen does not indicate that the message is receivedat the intended destination.To request the network to send you a delivery reportof the text messages and multimedia messages youhave sent (network service), select Options 45CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SettingsText message or MultimediamessageReceive report. The reports are saved inthe Reports folder.E-mail messagesSelect MenuMessagingMailbox.To receive and send e-mail, you must have a remotemailbox service. This service may be offered by aninternet service provider, a network service provider,or your company. Your device is compliant withinternet standards SMTP, IMAP4 (revision 1), and POP3,and with different vendor-specific e-mail solutions.Other e-mail providers may offer services with differentsettings or features than those described in this userguide. Contact your e-mail provider or service providerfor more details.Before you can send, receive, retrieve, reply to, andforward e-mail on your device, you must also do thefollowing:ವConfigure an internet access point. See "Internetaccess points", p. 42.ವSet up an e-mail account, and define the e-mailsettings correctly. To do this, use the mailbox guide,or define the account manually. See "E-mail accountsettings", p. 51.Contact your service provider for the correct settings.Set up your e-mailWith the e-mail wizard, you can set up your businesse-mail account, such as Microsoft Outlook, or MicrosoftExchange; and internet e-mail account, such as Googlee-mail services.1. To start the e-mail wizard, go to the home screen,scroll to the e-mail wizard, and press the scroll key.2. Enter your e-mail address and password. If thewizard is not able to configure your e-mail settingsautomatically, select your e-mail account type andenter the related settings.If your device contains any additional e-mail clients,those are offered to you when you start the e-mailwizard.When setting up your e-mail, you may be prompted forthe following information:ವUser nameವE-mail typeವIncoming mail serverವIncoming mail server portವOutgoing mail serverವOutgoing mail server portವPasswordವAccess pointIf you are setting up your business e-mail, ask yourcompany IT department for details. If you are settingup your internet e-mail, see your e-mail serviceprovider’s website for details.Connect to a remote mailboxE-mail addressed to you is not automatically receivedby your device, but by your remote mailbox. To read46CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
your e-mail, you must first connect to the remotemailbox; then select the e-mail messages you wish toretrieve into your device.1. To retrieve received e-mail messages to your deviceand view them, select your mailbox in theMessaging main view. When the device asksConnect to mailbox?, select Yes.2. Enter your user name and password, if prompted.3. Select OptionsRetrieve e-mailNew toretrieve new messages that you have neither readnor retrieved, Selected to retrieve only messagesyou select from the remote mailbox, or All toretrieve all messages not previously retrieved.4. To manage your e-mail offline to save in connectioncosts and work in conditions that do not allow adata connection, select OptionsDisconnect todisconnect from the remote mailbox. Any changesyou make in the remote mailbox folders whileoffline, take effect in your remote mailbox the nexttime you go online and synchronise.Read and reply to e-mailImportant: Exercise caution when openingmessages. Messages may contain malicious softwareor otherwise be harmful to your device or PC.To read a received e-mail, open it from the mailbox.To open an attachment, select OptionsAttachments. Scroll to the attachment, and press thescroll key.To reply only to the sender of an e-mail, selectOptionsReplyTo sender.To reply to all recipients of an e-mail, select OptionsReplyTo all.Tip: If you reply to an e-mail that containsattached files, the attachments are not includedin the reply. If you forward the received e-mail,the attachments are included.To forward an e-mail, select OptionsForward.To attach a file to an e-mail message, select OptionsInsert and the attachment you want to add.To delete an attachment from an e-mail that you aresending, select the attachment and OptionsRemove.To set the message priority, select OptionsSendingoptionsPriority.To set the sending time for the e-mail message, selectOptionsSending optionsSend message.Select Immediately, or select When conn. avail. ifyou are working offline.To call the sender of the e-mail message, if the sendercan be found in Contacts, select OptionsCall.To reply to the sender of the e-mail with an audiomessage or multimedia message, select OptionsCreate message.Write and send e-mail1. To write an e-mail, select New messageE-mail.47CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
2. Select OptionsAdd recipient to select therecipients' e-mail addresses from Contacts, or enterthe e-mail addresses in the To field. Use a semicolonto separate entries. Use the Cc field to send a copyto other recipients, or the Bcc field to send a blindcopy to recipients.3. In the Subject field, enter the subject of the e-mail.4. Enter your e-mail message in the text area, andselect OptionsSend.Delete messagesTo free up memory space on your device, regularlydelete messages from the Inbox and Sent folders, anddelete retrieved e-mail messages.To delete e-mail from the device only, and keep theoriginal on the server, select OptionsDeletePhone (header remains).To delete e-mail both from the device and the remoteserver, select OptionsDeletePhone andserver.To cancel the deleting, select OptionsRestore.Subfolders in your remote e-mailIf you create subfolders in your IMAP4 mailboxes on aremote server, you can view and manage these folderswith your device when you subscribe to them. You canonly subscribe to folders in your IMAP4 mailboxes.To view folders in your IMAP4 mailbox, establish aconnection, and select OptionsE-mail settingsRetrieval settingsFolder subscriptions.To view a remote folder, select a folder and OptionsSubscribe. Every time you go online, the subscribedfolders are updated. This may take some time if thefolders are large.To update the list of folders, select a folder andOptionsUpdate folder list.Write and send textmessagesSelect MenuCommunic.Messaging.Your device supports text messages beyond the limitfor a single message. Longer messages are sent as twoor more messages. Your service provider may chargeaccordingly. Characters with accents or other marks,and characters from some language options, take upmore space, and limit the number of characters thatcan be sent in a single message.1. To write a text message, select New messageText message.2. In the To field, enter a recipient's number, or pressthe scroll key to add a recipient from Contacts. If youenter more than one number, separate thenumbers with a semicolon.3. Enter the text of the message. To use a template,select OptionsInsertTemplate.4. Select OptionsSend.48CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Multimedia messagesSelect MenuCommunic.Messaging.Only devices that have compatible features can receiveand display multimedia messages. The appearance ofa message may vary depending on the receiving device.A multimedia message (MMS) can contain text andobjects such as images, sound clips, or video clips.Before you can send or receive multimedia messageson your device, you must define the multimediamessage settings. Your device may have recognisedthe SIM card provider and automatically configured themultimedia message settings. If not, use Settingswizard, or contact your service provider for the correctsettings. See "Multimedia message settings", p. 50.Create and send multimediamessagesImportant: Exercise caution when openingmessages. Messages may contain malicious softwareor otherwise be harmful to your device or PC.1. To create a new message, select New messageMultimedia message.2. In the To field, enter a recipient's number or e-mailaddress, or press the scroll key to add a recipientfrom Contacts. If you enter more than one numberor e-mail address, separate them with a semicolon.3. In the Subject field, enter a subject for themessage. To change the fields that are visible,select OptionsAddress fields.4. Enter the text of the message, and select OptionsInsert object to add media objects. You can addobjects such as Image,Sound clip, or Video clip.The wireless network may limit the size of MMSmessages. If the inserted picture exceeds this limitthe device may make it smaller so that it can be sentby MMS.5. Each slide of your message can contain only onevideo or sound clip. To add more slides to yourmessage, select OptionsInsert newSlide.To change the order of slides in your message,select OptionsMove.6. To preview a multimedia message before sendingit, select OptionsPreview.7. Select OptionsSend.To delete an object from a multimedia message, selectOptionsRemove.To set the sending options for the current multimediamessage, select OptionsSending options.Instant messagingSelect MenuCommunic.IM.Instant messaging (IM) (network service) allows you toconverse with other people using instant messagesand join discussion forums (IM groups) with specifictopics. Various service providers maintain IM serversthat you can log in to after you register to an IM service. 49CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Service providers may differ in their support offeatures.If IM is not available from your service provider, it maynot appear in the menu of your device. Contact yourservice provider for more information about signing upfor IM services, costs of services, and IM settings. Youmay receive the settings in a special text message fromthe service provider.Messaging settingsSelect MenuCommunic.MessagingOptionsSettings.Fill in all fields marked with Must be defined or witha red asterisk.Your device may recognise the SIM card provider andconfigure the correct text message, multimediamessage, and GPRS settings automatically. If not,contact your service provider for the correct settings,order the settings from your service provider in aconfiguration message, or use the Settings wizardapplication.Text message settingsSelect MenuCommunic.MessagingOptionsSettingsText message.Select from the following:ವMessage centres — View the available messagecentres for your device, or create a new one.ವMessage centre in use — Select a message centreto send the message.ವCharacter encoding — Select Reduced support touse automatic character conversion to anotherencoding system when available.ವReceive report — Select Yes if you want thenetwork to send you delivery reports on yourmessages (network service).ವMessage validity — Select how long the messagecentre resends your message if the first attempt fails(network service). If the recipient cannot be reachedwithin the validity period, the message is deletedfrom the message centre.ವMessage sent as — Convert the message to anotherformat, such as Text,Fax,Paging, or E-mail.Change this option only if you are sure that yourmessage centre is able to convert text messages intothese other formats. Contact your service provider.ವPreferred connection  — Select the preferredmethod of connection when sending text messagesfrom your device.ವReply via same centre — Select whether you wantthe reply message to be sent using the same textmessage centre number (network service).Multimedia messagesettingsSelect MenuCommunic.MessagingOptionsSettingsMultimedia message.Select from the following:ವImage size — Select Small or Large to scale imagesin multimedia messages. Select Original tomaintain the original image size.50CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವMMS creation mode — Select Restricted to haveyour device prevent you from including content inmultimedia messages that may not be supported bythe network or the receiving device. To receivewarnings about including such content, selectGuided. To create a multimedia message with norestrictions on attachment type, select Free. If youselect Restricted, creating multimediapresentations is not possible.ವAccess point in use — Select the default accesspoint to connect to the multimedia message centre.You may not be able to change the default accesspoint if it is preset in your device by your serviceprovider.ವMultimedia retrieval — Select Alwaysautomatic to receive multimedia messages alwaysautomatically, Auto in home netw. to receivenotification of a new multimedia message that youcan retrieve from the message centre (for example,when you are travelling abroad and are outside yourhome network), Manual to retrieve multimediamessages from the message centre manually, orOff to prevent receipt of any multimedia messages.ವAllow anon. msgs. — Select whether you want toreceive messages from unknown senders.ವReceive adverts — Select whether you want toreceive messages defined as advertisements.ವReceive report — Select Yes to have the status ofthe sent message to be shown in the log (networkservice). Receiving a delivery report of a multimediamessage that has been sent to an e-mail addressmay not be possible.ವDeny report sending — Select Yes to not senddelivery reports from your device for receivedmultimedia messages.ವMessage validity — Select how long the messagingcentre tries to send the message (network service).If the recipient of a message cannot be reachedwithin the validity period, the message is removedfrom the multimedia messaging centre. Maximumtime is the maximum amount of time allowed bythe network.E-mail account settingsSelect MenuMessagingOptionsSettingsE-mail.If you try to edit mailbox settings but have not set upan e-mail account, the mailbox guide opens and helpsyou set up your e-mail account.If you have defined a mailbox, scroll to it, and press thescroll key to edit the settings.The settings available for editing may vary. Somesettings may be preset by your service provider.Connection settingsTo define the connection settings, select an e-mailaccount and OptionsEditConnectionsettings. To edit the settings for the e-mail you receive,select Incoming e-mail. To edit the settings for the e-mail you send, select Outgoing e-mail.User settingsTo define the user settings for an e-mail account, selectthe account, select OptionsEditUser settings,and define the following settings:51CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವMy name — Enter a name to appear before your e-mail address when you send e-mail.ವReply-to — Select whether you want replies to beredirected to a different address. Select On, andenter the e-mail address to which you want to directthe replies. You can only enter one address to whichreplies are directed.ವDelete e-mails from — Select whether you want todelete the e-mail messages only from the device orfrom both the device and the server. Select Alwaysask if you want to confirm from where the e-mailshould be deleted every time you delete an e-mail.ವSend message — Select to send the e-mailimmediately or when a connection is available.ವSend copy to self — Select whether you want tosave a copy of the e-mail to your remote mailboxand to the address defined in My e-mail address inthe Outgoing e-mail settings.ವInclude signature — Select whether you want toattach a signature to your e-mail messages.ವNew e-mail alerts — Select whether you want tobe notified of a new received e-mail message witha tone and a note.Retrieval settingsTo define the retrieval settings, select the e-mailaccount, select OptionsEditRetrievalsettings, and define the following settings:ವE-mail to retrieve — Select whether you want toretrieve only the e-mail header information such assender, subject and date, e-mail, or e-mail withattachments. This setting is for POP3 mailboxesonly.ವRetrieval amount — Select the number of e-mailmessages you want to retrieve from the remoteserver to your mailbox.ವIMAP4 folder path — Define the folder path forfolders to be subscribed. This setting is for IMAP4mailboxes only.ವFolder subscriptions — Subscribe to other foldersin the remote mailbox and retrieve content fromthose folders. This setting is for IMAP4 mailboxesonly.Automatic retrieval settingsTo define the automatic retrieval settings for an e-mailaccount, select the account, select OptionsEditAutomatic retrieval, and define the followingsettings:ವE-mail retrieval — Select Enabled to retrieve newe-mail messages automatically from your remotemailbox, or Only in home netw. to retrieve new e-mail messages automatically from your remotemailbox only when you are in your home networkand not, for example, travelling.ವRetrieval days — Select the days on which e-mailis retrieved to your device.ವRetrieval hours — Define the hours between whichthe e-mail is retrieved.ವRetrieval interval — Select the interval betweenretrieving new e-mail messages.ವE-mail notifications — Select whether you want toreceive notifications on received e-mail.52CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Other settingsSelect MenuCommunic.MessagingOptionsSettingsOther.Select from the following:ವSave sent messages  — Select whether to storesent messages in the Sent folder.ವNumber of saved msgs.  — Enter the number ofsent messages to save. When the limit is reached,the oldest message is deleted.ವMemory in use  — Select where to save yourmessages. You can save messages to the memorycard only if a memory card is inserted.ವFolder view  — Define how you want the messagesin Inbox to be shown.53CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
PhoneTo make and receive calls, the device must be switchedon, the device must have a valid SIM card installed, andyou must be located in the service area of a cellularnetwork.To make or receive a net call, your device must beconnected to a net call service. To connect to a net callservice, your device must be in the coverage of aconnection network, such as a WLAN access point.Voice callsNote: The actual invoice for calls and services fromyour service provider may vary, depending on networkfeatures, rounding off for billing, taxes, and so forth.Answer a callTo answer a call, press the call key.To reject a call, press the end key.To mute the ringing tone instead of answering a call,select Silence.When you have an active call and the call waitingfunction (network service) is activated, press the callkey to answer a new incoming call. The first call is puton hold. To end the active call, press the end key.Make a callImportant: If the device has been locked, enter thelock code to activate the phone function. When thedevice is locked, calls may be possible to the officialemergency number. Making an emergency call in theoffline profile or when the device is locked requiresthat the device recognise the number to be an officialemergency number. It is advisable to change theprofile or unlock the device by entering the lock codebefore you make the emergency call.To make a call, enter the phone number, including thearea code, and press the call key.Tip:  For international calls, add the + characterthat replaces the international access code, andenter the country code, area code (omit theleading 0, if necessary), and phone number.To end the call or cancel the call attempt, press the endkey.To make a call using the saved contacts, press thecontacts key. Enter the first letters of the name, scroll54CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
to the name, and press the call key. See "Nokia Contactsfor Eseries", p. 28.To make a call using the log, press the call key to viewup to 20 numbers that you last called or attempted tocall. Scroll to the desired number or name, and pressthe call key. See "Log", p. 60.To adjust the volume of an active call, use the volumekeys.To switch from a voice call to a video call, selectOptionsSwitch to video call. The device ends thevoice call and makes a video call to the recipient.Make a conference call1. To make a conference call, enter a participant'sphone number, and press the call key.2. When the participant answers, select OptionsNew call.3. When you have made a phone call to all theparticipants, select OptionsConference tomerge the calls into a conference call.To mute the microphone of your device during the call,select OptionsMute.To drop a participant from the conference call, scroll tothe participant, and select OptionsConferenceDrop participant.To discuss privately with a conference call participant,scroll to the participant, and select OptionsConferencePrivate.Video callsTo be able to make a video call, you need to be in thecoverage of a UMTS network. For availability of andsubscription to video call services, contact yournetwork operator or service provider. While talking,you can see a real-time, two-way video between youand the recipient of the call, if the recipient has acompatible mobile phone. The video image capturedby the camera in your device is shown to the video callrecipient. A video call can only be made between twoparties.Make a video callWarning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.To make a video call, enter the phone number or selectthe recipient of the call from Contacts, and selectOptionsCallVideo call. When the video callstarts, the camera of the device is activated. If thecamera is already in use, video sending is disabled. Ifthe recipient of the call does not want to send a videoback to you, a still image is shown instead. You candefine the still image in MenuToolsSettingsPhoneCallImage in video call.To disable the sending of audio, video, or video andaudio, select OptionsDisableSending audio,Sending video, or Sending aud. & video.To use the loudspeaker for receiving audio, selectOptionsActivate loudspeaker. To mute the55CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
loudspeaker and use the earpiece, select OptionsActivate handset.To swap the places of images, select OptionsChange image order.To zoom the image on the display, select OptionsZoom in or Zoom out.To end the video call and make a new voice call to thesame recipient, select OptionsSwitch to voicecall.Share a videoUse Video sharing (network service) to send live videoor a video clip from your mobile device to anothercompatible mobile device during a voice call. To usethis feature, the device must be within the coverage ofa UMTS network.1. Make a phone call to the selected recipient. You canstart sharing a video once the phone call isestablished and your device has been registered tothe SIP server.2. To send live video or a video clip from your device,select OptionsShare videoLive or Clip. Topreview the clip, select OptionsPlay.3. Select the recipient from Contacts, or enter therecipient's SIP address manually to send aninvitation to the recipient. Sharing beginsautomatically when the recipient accepts the videosharing.4. To end sharing the video, select Stop. The voice callcontinues normally.Receive a video sharinginvitationWhen you receive a video sharing invitation, a messageis displayed showing the caller's name or SIP address.To accept the invitation and begin the sharing session,select Accept.To reject the invitation, select Reject. The voice callcontinues normally.Net callsSelect MenuCommunic.Internet tel..Your device supports voice calls over the internet (netcalls). Your device attempts emergency calls primarilyover cellular networks. If an emergency call usingcellular networks is not successful, your deviceattempts an emergency call through your net callprovider. Due to the established nature of cellulartelephony, you should use cellular networks foremergency calls, if possible. If you have cellularnetwork coverage available, make sure that yourcellular phone is switched on and ready to make callsbefore you attempt an emergency call. The capabilityfor an emergency call using internet telephonydepends on the availability of a WLAN and your net callprovider's implementation of emergency callcapabilities. Contact your net call provider to check theinternet telephony emergency call capability.With the net call service (network service), you canmake and receive calls over the internet using the VoIP(voice over internet protocol) technology. Net calls can56CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
be established between computers, between mobilephones, and between a VoIP device and a traditionaltelephone. To make or receive a net call, your devicemust be within WLAN coverage, for example. Theavailability of the net call service may vary accordingto your country or area.Create a net call profileBefore you can make net calls, you need to create a netcall profile.1. Select MenuToolsSettingsConnectionSIP settingsOptionsNewSIP profile, and enter the required information. Tomake the login to the net call service automatic,select RegistrationAlways on. Contact your netcall provider for the correct settings.2. Select Back until you return to the Connectionsettings main view.3. Select Internet tel.OptionsNew profile.Enter a name for the profile, and select the SIPprofile you just created.To set the created profile to be used automaticallywhen connecting to the net call service, select MenuCommunic.Internet tel.Preferred profile.To login to the net call service manually, selectRegistrationWhen needed in the SIP settingswhen creating a net call profile.To make secure net calls, ask your service provider forsecure net call settings. The proxy server selected forthe net call profile must support secure net calls. Asecure net call is indicated with  .Connect to the net callserviceSelect MenuCommunic.Internet tel..To make or receive a net call, your device must beconnected to a net call service. If you have selectedautomatic login, your device automatically connects tothe net call service. If you login to the service manually,select an available network from the list and Select.The list of networks is refreshed automatically every 15seconds. To refresh the list manually, select OptionsRefresh. Use this option if your WLAN is not shown onthe list.To select a net call service for outgoing calls if thedevice is connected to more than one service, selectOptionsChange service.To configure new services, select OptionsConfigure service. This option is shown only if thereare services that have not been configured.To save the network to which you are currentlyconnected, select OptionsSave network. Thesaved networks are marked with a star on the list ofnetworks.To connect to a net call service using a hidden WLAN,select OptionsUse hidden network.To end the connection to a net call service, selectOptionsDisconnect from service.57CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Make net callsYou can make a net call from all applications where youcan make a regular voice call. For example in Contacts,scroll to the desired contact, and select CallInternetcall.To make a net call in the home screen, enter the SIPaddress, and press the call key.To set net call as the preferred call type for outgoingcalls, select MenuCommunic.Internet tel.OptionsSettingsDefault call typeInternetcall. When your device is connected to a net call service,all calls are made as net calls.1-touch dialingSelect MenuToolsSettingsPhoneCallSpeed diallingOn.1-touch dialing allows you to make a call by pressingand holding a number key when in the home screen.To assign a number key to a phone number, selectMenuCommunic.Speed dial. Scroll to thenumber key (2 - 9) on the display, and select OptionsAssign. Select the desired number from Contacts.To delete the phone number assigned to a number key,scroll to the 1-touch dialing key, and select OptionsRemove.To modify a phone number assigned to a number key,scroll to the 1-touch dialing key, and select OptionsChange.Voice mailSelect MenuCommunic.Call mailbox.When you open the Voice mail application for the firsttime, you are asked to enter the number of your voicemailbox.To call your voice mail, select OptionsCall voicemailbox.If you have configured net call settings to your deviceand have an internet call mailbox, select Internet callmailboxOptionsCall internet call mbx. to callit.To call your voice mail when in the home screen, pressand hold 1; or press 1 and then the call key. If you havedefined an internet call mailbox, select whether youwant to call your voice mail or internet call mailbox.To change the voice mailbox number, select themailbox and OptionsChange number.To change the internet call mailbox address, select themailbox and OptionsChange address.Voice aidSelect MenuToolsVoice aid.The Voice aid application reads text on the display,allowing you to use the basic functions of your devicewithout looking at the display.To hear the entries in your contacts list, selectContacts. Do not use this option if you have more than500 contacts.58CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To hear information on your missed and received calls,dialled numbers, and frequent calls, select Recentcalls.To listen to your voice messages, select Voicemailbox.To dial a telephone number, select Dialler.To use voice commands to make a phone call, selectVoice commands.To have your received messages read aloud, selectMessage reader.To hear the current time, select ClockTime. To hearthe current date, select ClockDate.If the Voice aid application is open when a calendaralarm is due, the application reads the calendar alarmcontent aloud.To hear more options, select Options.Voice commandsSelect MenuToolsVoice comm..Use voice commands to make phone calls and launchapplications, profiles, or other functions on the device.The device creates a voice tag for the entries in Contactsand for the functions designated in the Voicecommands application. When a voice command isspoken, the device compares the spoken words to thevoice tag in the device. Voice commands are notdependent on a speaker’s voice; however, the voicerecognition in the device adapts to the main user’svoice to recognise voice commands better.Make a callA voice tag for a contact is the name or nickname thatis saved on the contact in Contacts.Note:  Using voice tags may be difficult in a noisyenvironment or during an emergency, so you shouldnot rely solely upon voice dialing in all circumstances.To listen to a voice tag, open a contact, and selectOptionsPlay voice tag.1. To make a call using a voice command, press andhold the voice key.2. When you hear the tone or see the visual display,clearly speak the name saved on the contact.3. The device plays a synthesised voice tag for therecognised contact in the selected device language,and displays the name and number. After a timeoutof 1.5 seconds, the device dials the number. If therecognised contact was not correct, select Next toview a list of other matches or Quit to canceldialling.If several numbers are saved under the contact, thedevice selects the default number, if it has been set.Otherwise, the device selects the first availablenumber of the following fields: Mobile,Mobile(home),Mobile (business),Telephone,Tel.(home), and Tel. (business).Push to talkSelect MenuCommunic.PTT.59CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Push to talk (PTT) (network service) provides directvoice communication connected with the push of a key.With PTT, you can use your device as a walkie-talkie:one person talks while the others listen through thebuilt-in loudspeaker. Users take turns responding toeach other. Because only one user can talk at a time,the maximum duration of a speech turn is limited. Fordetails of the speech turn duration, contact yourservice provider.Warning: Do not hold the device near your earwhen the loudspeaker is in use, because the volumemay be extremely loud.LogSelect MenuLog.Log stores information about the communicationhistory of the device. The device registers missed andreceived calls only if the network supports thesefunctions, the device is switched on and within thenetwork service area.Call and data registersTo view recently missed, received, and dialled calls,select Recent calls.Tip: To open Dialled numbers when in thehome screen, press the call key.To view the approximate duration of calls to and fromyour device, select Call duration.To view the amount of data transferred during packetdata connections, select Packet data.Monitor all communicationsTo monitor all voice calls, text messages, or dataconnections registered by the device, open the generallog tab.To view detailed information about a communicationevent, scroll to it, and press the scroll key.Tip: Subevents, such as a text message sent inmore than one part and packet dataconnections, are logged as one communicationevent. Connections to your mailbox, multimediamessaging centre, or web pages are shown aspacket data connections.To add the phone number from a communication eventto Contacts, select OptionsSave to Contacts, andselect to create a new contact or to add the phonenumber to an existing contact.To copy the number, for example to paste it to a textmessage, select OptionsCopy number.To view a single type of communication event orcommunication events with one other party, selectOptionsFilter, and select the desired filter.To erase the contents of the log, recent calls register,and messaging delivery reports permanently, selectOptionsClear log.60CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
TravellingNeed directions? Looking for a restaurant? Your Eseriesdevice has the tools to get you where you want to be.About GPS andsatellite signalsThe Global Positioning System (GPS) is a worldwideradio navigation system that includes 24 satellites andtheir ground stations that monitor the operation of thesatellites. Your device has an internal GPS receiver.A GPS terminal receives low-power radio signals fromthe satellites and measures the travel time of thesignals. From the travel time, the GPS receiver cancalculate its location to the accuracy of metres.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.The Global Positioning System (GPS) is operated by thegovernment of the United States, which is solelyresponsible for its accuracy and maintenance. Theaccuracy of location data can be affected byadjustments to GPS satellites made by the United Statesgovernment and is subject to change with the UnitedStates Department of Defense civil GPS policy and theFederal Radionavigation Plan. Accuracy can also beaffected by poor satellite geometry. Availability andquality of GPS signals may be affected by your location,buildings, natural obstacles, and weather conditions.The GPS receiver should only be used outdoors to allowreception of GPS signals.Any GPS should not be used for precise locationmeasurement, and you should never rely solely onlocation data from the GPS receiver and cellular radionetworks for positioning or navigation.The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.To enable or disable different positioning methods,such as Bluetooth GPS, select MenuToolsSettingsGeneralPositioningPositioningmethods.About satellite signalsIf your device cannot find the satellite signal, considerthe following:ವIf you are indoors, go outdoors to receive a bettersignal.ವIf the numeric keypad slide is closed, open it.ವIf you are outdoors, move to a more open space.ವEnsure that your hand does not cover the GPSantenna of your device. 61CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವIf the weather conditions are bad, the signalstrength may be affected.ವEstablishing a GPS connection may take from acouple of seconds to several minutes.Satellite statusTo check how many satellites your device has found,and whether your device is receiving satellite signals,select MenuGPSGPS dataPositionOptionsSatellite status. If your device has foundsatellites, a bar for each satellite is shown in thesatellite info view. The longer the bar, the stronger thesatellite signal. When your device has received enoughdata from the satellite signal to calculate thecoordinates of your location, the bar turns black.Initially your device must receive signals from at leastfour satellites to be able to calculate the coordinates ofyour location. When the initial calculation has beenmade, it may be possible to continue calculating thecoordinates of your location with three satellites.However, the accuracy is generally better when moresatellites are found.Positioning settingsSelect MenuToolsSettingsGeneralPositioning.To use a specific positioning method to detect thelocation of your device, select Positioning methods.To select a positioning server, select Positioningserver.MapsSelect MenuGPSMaps.With Maps, you can see your current location on themap, browse maps for different cities and countries,search for addresses and different points of interest,plan routes from one location to another, and savelocations and send them to compatible devices. Youcan also purchase licences for extra services, such astravel guides, traffic information, and navigationservice with voice guidance. These services are notavailable for all countries or regions.If you browse to an area which is not covered by mapsalready downloaded in your device, a map for the areais automatically downloaded through the internet.Some maps may be available in your device or memorycard. You can also use the Nokia Map Loader PCsoftware to download maps. To install Nokia MapLoader to a compatible PC, go towww.maps.nokia.com.Downloading maps may involve the transmission oflarge amounts of data through your service provider'snetwork. Contact your service provider for informationabout data transmission charges.When you use Maps for the first time, you may need toselect a cellular or a WLAN access point fordownloading maps. To change the access point later,select OptionsSettingsInternetDefaultaccess point.62CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
About MapsTo connect to the internet automatically when youstart Maps, select OptionsToolsSettingsInternetGo online at start-upAlways on.To prevent automatic downloading of maps, selectOptionsToolsSettingsInternetGoonline at start-upNever.To set the device to ask your permission beforeconnecting to the internet, select OptionsToolsSettingsInternetGo online at start-upAlways ask.To be informed when your device registers to anetwork other than your home network, selectOptionsToolsSettingsInternetRoaming warningOn (shown only when you areonline). For details and roaming costs, contact yourservice provider.Tip: To avoid data transfer costs, you can alsouse Maps without an internet connection, andbrowse the maps that are saved in your deviceor memory card.Almost all digital cartography is inaccurate andincomplete to some extent. Never rely solely on thecartography that you download for use in this device.Move on a mapThe map coverage varies by country and region.When you open Maps, the capital of the country you arein or the location that was saved from your last sessionis shown. The map of the location is also downloaded,if needed.To zoom in to your GPS position or your last knownlocation, press 0.When the GPS connection is active,   shows yourcurrent location on the map.To move on the map, scroll up, down, left, or right withthe scroll key. The map is oriented towards north bydefault.To zoom in and out on the map, press * and #.When you browse the map on the display, a new mapis automatically downloaded if you scroll to an areawhich is not covered by maps already downloaded.These maps are free of charge, but downloading mayinvolve the transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider. The maps are automaticallysaved in the device memory or on a compatiblememory card (if inserted).Display indicatorsThe GPS indicator   on the bottom rightcorner of the display shows the availability andstrength of the satellite signal. One bar is one satellite.When the device tries to find a satellite, the bar isyellow. When the device receives enough data from thesatellite to establish a GPS connection, the bar turnsgreen. The more green bars, the stronger the GPSconnection. 63CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Initially, your device must receive signals from at leastfour satellites to calculate the coordinates of yourlocation. After the initial calculation, signals from threesatellites may be enough.The data transfer indicator   shows theinternet connection used and the amount of datatransferred since the application started.Find locationsTo find a location in the city or area displayed on themap, enter the full or partial address of the location inthe search field, and press the scroll key. To find alocation in another city, enter the city and the full orpartial address, such as London Oxford Street, andpress the scroll key.To find a specific address, or an address in anothercountry, press the scroll key, and select SearchAddresses.Country/Region * and City or post codeare mandatory.Tip: To search for locations in another countryusing the search field, enter also the name of thecountry in the search field: Rome Italy.To import a location address from the Contactsapplication, press the scroll key and select SearchAddressesOptionsContact.The search results are grouped by categories. To limitthe search to one category, select OptionsSearch.If you search for locations without an internetconnection, the search results are limited to a radius of50 km (31 miles).Plan a routeTo plan a route, select your start point on the map orsearch for a location, press the scroll key, and selectAddTo route.To define the destination and add more locations foryour route, search for the location, and selectOptionsAdd route point.To show the route on the map, select OptionsShowroute.To navigate to the destination by car or on foot, if youhave purchased a licence for these extra services, selectOptionsStart driving or Start walking.To save the route, select OptionsSave route.GPS dataSelect MenuGPSGPS data.With GPS data, you can view your current location, findyour way to a desired location, and track distance.Select Navigation to view navigating information toyour trip destination, Position to view positioninginformation about your current location, or Trip dist.to view your travelling information such as thedistance and duration you have travelled, and youraverage and maximum speeds.The application must receive positioning informationfrom at least four satellites to be used as a travellingaid.64CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
The trip meter has limited accuracy, and roundingerrors may occur. Accuracy can also be affected byavailability and quality of GPS signals.Use GPS dataTo check the signal strength of the satellites thatprovide the positioning information necessary fornavigation, open any of the three views and selectOptionsSatellite status.To set a landmark or location as the destination of yourtrip, select NavigationOptionsSetdestination. You can also enter the destinationlatitude and longitude coordinates.To remove the destination set for your trip, selectNavigationOptionsStop navigation.To save your current position as a landmark, selectNavigation or Position, and OptionsSaveposition.To activate the trip meter, select Trip distanceOptionsStart. To stop the trip meter, selectOptionsStop.To reset all fields and start calculating the trip again,select Trip distanceOptionsRestart.To change the measuring system in use, selectOptionsSettingsMeasurement systemMetric or Imperial.To enter the altitude calibration to correct the altitudereceived from the positioning satellites, selectOptionsSettingsAltitude calibration.LandmarksSelect MenuGPSLandmarks.Landmarks are coordinates to geographic locationsthat you can save to your device for later use indifferent location-based services. You can createlandmarks using the internal GPS receiver of yourdevice or network (network service).Create a landmarkTo create a landmark, select OptionsNewlandmark. Select Current position to make a networkrequest for the latitude and longitude coordinates ofyour current location, Use map to select the locationfrom a map, or Enter manually to fill in necessarylocation information such as a name, category,address, latitude, longitude, and altitude.To show the landmark on the map, select OptionsShow on map.65CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Nokia Office ToolsNokia Office Tools support mobile business and enableeffective communication with work teams.Active notesSelect MenuOfficeActive notes.Active notes allows you to create, edit, and viewdifferent kinds of notes, for example, meeting memos,hobby notes, or shopping lists. You can insert images,videos, and sound in the notes. You can link notes toother applications, such as Contacts, and send notes toothers.To create a note, start writing.To edit a note, scroll to it, and press the scroll key.To insert images, sound clips, video, business cards,web bookmarks, and files, select OptionsInsertobject.To add new items to the note, select OptionsInsertnew. You can record sound and video clips, and captureimages.To add boldface, italics, or underlining to your text orchange the font colour, press and hold the shift key anduse the scroll key to select the text. Then selectOptionsText.To send the note using a text message, multimediamessage, e-mail, Bluetooth, or infrared, selectOptionsSend.To link a note to a contact, select OptionsLink noteto callAdd contacts. You can see the note on thedisplay of your device when making a call to orreceiving a call from the contact.CalculatorSelect MenuOfficeCalculator.This calculator has limited accuracy and is designed forsimple calculations.To make a calculation, enter the first number of thecalculation. Select a function such as add or subtractfrom the function map. Enter the second number of thecalculation, and select =. The calculator performsoperations in the order they are entered. The result ofthe calculation remains in the editor field and can beused as the first number of a new calculation.The device saves the result of the last calculation in itsmemory. Exiting the Calculator application orswitching off the device does not clear the memory. Torecall the last saved result the next time you open theCalculator application, select OptionsLast result.66CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To save the numbers or results of a calculation, selectOptionsMemorySave.To retrieve the results of a calculation from the memoryand use them in a calculation, select OptionsMemoryRecall.File managerSelect MenuOfficeFile mgr..With File manager, you can manage the contents andproperties of files and folders on your device memoryand memory card. You can open, create, move, copy,rename, send, and search for files and folders.Copyright protection may prevent sending some files.Open the device tab or the memory card tab.To select multiple files, scroll to each file, and selectOptionsMark/UnmarkMark.To send the selected files, select OptionsSend.To move or copy files or folders to another folder, selectOptionsMove to folder or Copy to folder. Defaultfolders such as Sound clips in Gallery cannot be moved.To search for files, select OptionsFind. Enter thesearch text, and press the scroll key. The folders andfiles whose names contain the search text aredisplayed.To view information about the selected file, selectOptionsDetails. To view additional informationabout the file online, select OptionsAdditionaldetails.QuickofficeSelect MenuOfficeQuickoffice.Quickoffice consists of Quickword for Microsoft Word,Quicksheet for Microsoft Excel, Quickpoint for MicrosoftPowerPoint, and Quickmanager for purchasingsoftware. You can view Microsoft Office 2000, XP, and2003 documents (*.doc, *.xls, and *.ppt) withQuickoffice. If you have the editor version ofQuickoffice, you can also edit files.All file formats or features are not supported.Work with filesTo open a file, scroll to it, and press the scroll key.To sort files according to the type, select OptionsSort by.To view the details of a file, select OptionsDetails. The details include the name, size and locationof the file, and the time and date when the file was lastmodified.To send files to a compatible device, select OptionsSend and the sending method.ConverterSelect MenuOfficeConverter.The converter has limited accuracy, and roundingerrors may occur. 67CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Convert measurements1. Scroll to the Type field, and select OptionsConversion type to open a list of measures. Selectthe measure to use, and select OK.2. Scroll to the first Unit field, and select OptionsSelect unit. Select the unit from which to convert,and select OK. Scroll to the next Unit field, andselect the unit to which to convert.3. Scroll to the first Amount field, and enter the valueto convert. The other Amount field changesautomatically to show the converted value.Set base currency andexchange rateWhen you change base currency, you must enter newexchange rates because all previously set exchangerates are cleared.Before you can make currency conversions, you mustchoose a base currency and add exchange rates. Therate of the base currency is always 1. The base currencydetermines the conversion rates of the othercurrencies.1. To set the rate of exchange for the unit of currency,scroll to the Type field, and select OptionsCurrency rates.2. Scroll to the currency type and enter the exchangerate you would like to set per single unit ofcurrency.3. To change the base currency, scroll to the currency,and select OptionsSet as base currency.4. Select DoneYes to save the changes.After you have inserted all the necessary exchangerates, you can make currency conversions.Zip managerSelect MenuOfficeZip.With Zip manager, you can create new archive files tostore compressed ZIP formatted files; add single ormultiple compressed files or directories to an archive;set, clear, or change the archive password for protectedarchives; and change settings, such as compressionlevel, and file name encoding.You can store the archive files on the device memoryor on a memory card.PDF readerSelect MenuOfficeAdobe Reader.With PDF reader you can read PDF documents on thedisplay of your device; search for text in thedocuments; modify settings, such as zoom level andpage views; and send PDF files using e-mail.PrintingYou can print documents, such as files, messages, orweb pages, from the device, preview a print job, definepage layout options, select a printer, or print to a file.You may not be able to print all types of documents.68CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To configure a printer for your device, select MenuOfficePrintersOptionsAdd. To set theprinter as the default printer, select OptionsPrinting optionsPrinters, scroll to the printer andselect OptionsSet as default.Before you print, make sure your device is properlyconnected to the printer.To print a document, select OptionsPrintingoptionsPrint.To print to a file, select OptionsPrintingoptionsPrintPrint to file, and determine thelocation for the file.To change the printing options, select OptionsPrinting options. You can select the printer you wantto use, the number of copies and the range of pagesyou want to print.To change the page layout before printing, selectOptionsPrinting optionsPage setup. You canchange the paper size and orientation, define themargins, and insert a header or a footer. The maximumlength of the header and footer is 128 characters.To preview a file or message before you print, selectOptionsPrinting optionsPreview.ClockSelect MenuOfficeClock.In Clock, you can view your local time and time zoneinformation, set and edit alarms, or modify date andtime settings.Alarm clockOpen the alarm clock tab.To set an alarm, select OptionsNew alarm. Whenan alarm is active,   is displayed.To switch off the alarm, select Stop, or to stop thealarm for 5 minutes, select Snooze. If the alarm timeis reached while the device is switched off, the deviceswitches itself on and starts sounding the alarm tone.If you select Stop, the device asks whether you wantto activate the device for calls. Select No to switch offthe device or Yes to make and receive calls. Do notselect Yes when wireless phone use may causeinterference or danger.To change the alarm time, select OptionsResetalarm.To remove the alarm, select OptionsRemovealarm.Clock settingsSelect OptionsSettings.To change the time or date, select Time or Date.To change the clock shown on the home screen, selectClock typeAnalogue or Digital.To allow the mobile phone network to update the time,date, and time zone information to your device(network service), select Network operator timeAuto-update.To change the alarm tone, select Clock alarm tone.69CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
NotesSelect MenuOfficeNotes.You can create and send notes to other compatibledevices, and save received plain text files (.txt format)to Notes.To write a note, start entering the text. The note editoropens automatically.To open a note, scroll to it, and press the scroll key.To send a note to other compatible devices, selectOptionsSend.To synchronise or to define synchronisation settingsfor a note, select OptionsSynchronisation. SelectStart to initialise synchronisation or Settings to definethe synchronisation settings for the note.70CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ConnectivityYour device offers several options to connect to theinternet, a corporate intranet, or to another device orcomputer.Fast downloadingHigh-speed downlink packet access (HSDPA, also called3.5G, indicated by  ) is a network service in UMTSnetworks and provides high-speed data downloads.When HSDPA support in the device is activated and thedevice is connected to a UMTS network that supportsHSDPA, downloading data such as messages, e-mail,and browser pages through the cellular network maybe faster. An active HSDPA connection is indicated by. The icon may vary between regions.To activate or deactivate HSDPA, select MenuToolsSettingsConnectionPacket dataHigh speed packet access. Some cellular networks donot allow incoming voice calls when HSDPA is active, inwhich case you need to deactivate HSDPA to receivecalls. Contact your network operator for details.For availability and subscription to data connectionservices, contact your service provider.HSDPA only affects the download speed; sending datato the network, such as messages and e-mail, is notaffected.Data cableTo avoid damaging the memory card, do not removethe data cable in the middle of a data transfer.Transfer data between your device and a PC1. Insert a memory card to your device and connectthe device to a compatible PC with the USB datacable.2. When the device asks which mode is used, selectMass storage. In this mode, you can see yourdevice as a removable hard drive in your computer.3. End the connection from the computer (forexample, from an Unplug or Eject Hardware wizardin Windows) to avoid damaging the memory card.To use Nokia PC Suite with your device, install Nokia PCSuite on your PC, connect the data cable, and select PCSuite.To use your device to connect your PC to the web,connect the data cable, and select Connect PC to Net.To synchronise the music in your device with NokiaMusic Player, install the Nokia Music Player software onyour PC, connect the data cable, and select Mediatransfer.71CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To change the USB mode you normally use with thedata cable, select MenuConnectivityUSBUSB connection mode and the desired option.To set the device to ask for the mode each time youconnect the USB data cable to the device, selectMenuConnectivityUSBUSB connectionmodeAsk on connectionYes.BluetoothSelect MenuConnectivityBluetooth.About BluetoothBluetooth technology enables wireless connectionsbetween electronic devices within a range of 10 metres(33 feet). A Bluetooth connection can be used to sendimages, videos, text, business cards, calendar notes, orto connect wirelessly to devices that use Bluetoothtechnology.Since devices using Bluetooth technologycommunicate using radio waves, your device and theother devices do not need to be in direct line-of-sight.The two devices only need to be within a maximum of10 metres of each other, although the connection canbe subject to interference from obstructions such aswalls or other electronic devices.Several Bluetooth connections can be active at a time.For example, if your device is connected to a headset,you can also transfer files to another compatible deviceat the same time.Features using Bluetooth technology increase thedemand on battery power and reduce the battery life.Send and receive data withBluetooth1. When you activate Bluetooth for the first time, youare asked to give a name to your device. Give yourdevice a unique name to make it easy to recogniseif there are several Bluetooth devices in the vicinity.2. Select BluetoothOn.3. Select My phone's visibilityShown to all orDefine period. If you select Define period, youneed to define the time during which your deviceis visible to others. Your device and the name youentered can now be seen by other users withdevices using Bluetooth technology.4. Open the application where the item you want tosend is stored.5. Select the item, and select OptionsSendViaBluetooth. The device searches for other devicesusing Bluetooth technology within range and liststhem.Tip: If you have sent data using Bluetoothbefore, a list of the previous search results isdisplayed. To search for more Bluetoothdevices, select More devices.6. Select the device with which you want to connect.If the other device requires pairing before data canbe transmitted, you are asked to enter a passcode.72CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
When the connection has been established, Sendingdata is shown.The Sent folder in the Messaging application does notstore messages sent using Bluetooth connectivity.To receive data using Bluetooth, select BluetoothOn and My phone's visibilityShown to all toreceive data from a non-paired device or Hidden toreceive data from a paired device only. When youreceive data through Bluetooth, a tone sounds, and youare asked if you want to accept the message in whichthe data is included. If you accept, the message isplaced in the Inbox folder in the Messaging application.Tip: You can access the files in the device or onthe memory card using a compatible accessorythat supports the File Transfer Profile Clientservice (for example, a laptop computer).A Bluetooth connection is disconnected automaticallyafter sending or receiving data. Only Nokia PC Suite andsome enhancements such as headsets may maintain aconnection even if not actively used.Pair devicesOpen the paired devices tab.Before pairing, create your own passcode (1-16 digits),and agree with the user of the other device to use thesame code. Devices that do not have a user interfacehave a fixed passcode. You need the passcode onlywhen you connect the devices for the first time. Afterpairing, it is possible to authorise the connection.Pairing and authorising the connection makesconnecting quicker and easier, as you do not have toaccept the connection between paired devices everytime you establish a connection.The passcode for remote SIM access must have 16digits.1. Select OptionsNew paired device. The devicestarts to search for Bluetooth devices within range.If you have sent data using Bluetooth before, a listof the previous search results is displayed. To searchfor more Bluetooth devices, select More devices.2. Select the device with which you want to pair, andenter the passcode. The same passcode must beentered to the other device as well.3. Select Yes to make the connection between yourdevice and the other device automatic, or No toconfirm the connection manually every time aconnection attempt is made. After pairing, thedevice is saved to the paired devices page.To give a nickname to the paired device, selectOptionsAssign short name. The nickname is onlydisplayed in your device.To delete a pairing, select the device whose pairing youwant to delete and OptionsDelete. To delete allpairings, select OptionsDelete all. If you arecurrently connected to a device and cancel the pairingwith that device, pairing is removed immediately, andthe connection is ended.To allow a paired device to connect automatically toyour device, select Set as authorised. Connectionsbetween your device and the other device can be madewithout your knowledge. No separate acceptance orauthorisation is needed. Use this status for your owndevices, such as your compatible headset or computer, 73CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
or devices that belong to someone you trust. If youwant to accept connection requests from the otherdevice separately every time, select Set asunauthorised.To use a Bluetooth audio enhancement such as aBluetooth handsfree or headset, you need to pair yourdevice with the enhancement. See the enhancementuser guide for the passcode and further instructions.To connect to the audio enhancement, switch on theenhancement. Some audio enhancements connectautomatically to your device. Otherwise open thepaired devices tab, scroll to the enhancement, andselect OptionsConnect to audio device.Security tipsWhen you are not using Bluetooth connectivity, selectBluetoothOff or My phone's visibilityHidden.Do not pair with an unknown device.Wireless LANYour device can detect and connect to a wireless localarea network (WLAN). To use WLAN, a network must beavailable in the location and your device must beconnected to it.WLAN connectionsImportant: Always enable one of the availableencryption methods to increase the security of yourwireless LAN connection. Using encryption reduces therisk of unauthorised access to your data.To use WLAN, you must create an internet access pointin a WLAN. Use the access point for applications thatneed to connect to the internet. A WLAN connection isestablished when you create a data connection usinga WLAN access point. The active WLAN connection isended when you end the data connection. You can alsoend the connection manually. See "Connectionmanager", p. 76.You can use WLAN during a voice call or when packetdata is active. You can only be connected to one WLANaccess point device at a time, but several applicationscan use the same internet access point.When the device is in the Offline profile, you can stilluse WLAN, if available. Remember to comply with anyapplicable safety requirements when establishing andusing a WLAN connection.If you move the device to another location within theWLAN and out of range of a WLAN access point, theroaming functionality can automatically connect yourdevice to another access point that belongs to the sameWLAN. As long as you remain within range of accesspoints that belong to the same network, your devicecan stay connected to the network.Tip: To check the unique media access control(MAC) address that identifies your device, forexample to configure the MAC address of your74CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
device to a WLAN router, enter *#62209526# onthe device keypad. The MAC address is shown onthe device display.See WLAN availabilityTo have your device show WLAN availability, selectMenuToolsSettingsConnectionWireless LANShow WLAN availability.If WLAN is available,   is shown on the display.Tip: You can also scan for networks in range.WLAN wizardSelect MenuConnectivityWLAN wiz..The WLAN wizard helps you find and connect to awireless LAN. When you open the application, yourdevice starts to scan for available WLANs and lists them.To update the list of available WLANs, select OptionsRefresh.To start or continue browsing the web using the accesspoint of the WLAN, scroll to the desired network, andselect OptionsStart Web browsing or Cont. Webbrowsing.To disconnect the active connection to the WLAN, selectOptionsDisconnect WLAN.To view the details of the WLAN, select OptionsDetails.To save the access point of the WLAN, select OptionsDefine access point.Always enable one of the available encryption methodsto increase the security of your WLAN connection. Usingencryption reduces the risk of unauthorised access toyour data.Use the wizard on the home screenOn the home screen, the WLAN wizard shows the statusof your WLAN connections and network searches. Toview the available options, scroll to the row showingthe status, and press the scroll key. Depending on thestatus, you can start the Web browser using a WLANconnection, connect to your net call service, disconnectfrom a WLAN, search for WLANs, or set the networkscanning on or off.If WLAN scanning is off and you are not connected toany WLAN, WLAN scanning off is displayed on thehome screen. To set scanning on and search foravailable WLANs, scroll to the row showing the status,and press the scroll key.To start a search for available WLANs, scroll to the rowshowing the status, pressthe scroll key, and selectSearch for WLAN. To setWLAN scanning off, scroll tothe row showing the status,press the scroll key, andselect Switch WLAN scanoff.When Start Webbrowsing or Use for isselected, the WLAN wizardautomatically creates anaccess point for the selected 75CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
WLAN. The access point can also be used with otherapplications requiring WLAN connection.If you select a secured WLAN, you are asked to enterthe relevant passcodes. To connect to a hiddennetwork, you must enter the correct service setidentifier (SSID).To use the found WLAN for a net call connection, scrollto the row showing the status, and press the scroll key.Select Use for, the desired net call service, and theWLAN to be used.ModemSelect MenuConnectivityModem.Together with a compatible computer, you can useyour device as a modem to connect to the web, forexample.Before you can use your device as a modemವYou need an appropriate data communicationssoftware on your computer, such as Nokia PC Suite.For more information, see the Nokia PC Suite guide.ವYou must subscribe to the appropriate networkservices from your service provider or internetservice provider.ವYou must have the appropriate drivers installed onyour computer. You must install drivers for the cableconnection, and you may need to install or updateBluetooth or infrared drivers.To connect the device to a compatible computer usinginfrared, press the scroll key. Make sure the infraredports of the device and computer are directly facingeach other with no obstacles between them.To connect your device to a computer using Bluetoothwireless technology, initiate the connection from thecomputer. To activate Bluetooth in your device, selectMenuConnectivityBluetooth and selectBluetoothOn.If you use a cable to connect your device to a computer,initiate the connection from the computer.You may not be able to use some of the othercommunication features when the device is used as amodem.Connection managerSelect MenuConnectivityConn. mgr..View and end activeconnectionsTo see the open data connections, select Active dataconnections.To view detailed information about networkconnections, select a connection from the list andOptionsDetails. The type of information showndepends on the connection type.To end the selected network connection, selectOptionsDisconnect.To end all active network connections simultaneously,select OptionsDisconnect all.76CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Search for WLANTo search for WLANs available within range, selectAvailable WLAN networks. The available WLANs arelisted with their network mode (infrastructure or ad-hoc), signal strength, and network encryptionindicators, and whether your device has an activeconnection with the network.To view the details of a network, scroll to it, and pressthe scroll key.To create an internet access point for a network, selectOptionsDefine access point.77CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Security and data managementManage the data and software on your device, and takecare of the security of the device and its contents.Important: Your device can only support oneantivirus application. Having more than oneapplication with antivirus functionality could affectperformance and operation or cause the device to stopfunctioning.Lock the deviceImportant: If the device has been locked, enter thelock code to activate the phone function. When thedevice is locked, calls may be possible to the officialemergency number. Making an emergency call in theoffline profile or when the device is locked requiresthat the device recognise the number to be an officialemergency number. It is advisable to change theprofile or unlock the device by entering the lock codebefore you make the emergency call.To prevent access to the contents of your device, lockthe device when in home screen. Press the power key,select Lock phone, and enter your lock code. Thedefault lock code is 12345. To unlock, press the leftselection key, enter your lock code, and press the scrollkey.To change the lock code, select MenuToolsSettingsGeneralSecurityPhone and SIMcardLock code. Enter the old code and then thenew code twice. The new code can be 4-255 characterslong. Both alphabets and digits can be used, and bothuppercase and lowercase alphabets are possible.You can also lock the device remotely by sending a textmessage to the device. To enable remote locking andto define the text for the message, select MenuToolsSettingsGeneralSecurityPhoneand SIM cardAllow remote lockYes. Enter theremote lock message and confirm the message. Themessage must be at least 5 characters long.Memory card securitySelect MenuToolsMemory.You can protect a memory card with a password toprevent unauthorised access. To set a password, selectOptionsSet password. The password can be up to8 characters long and is case-sensitive. The passwordis stored in your device. You do not need to enter itagain while you use the memory card on the samedevice. If you use the memory card on another device,you are asked for the password. Not all memory cardssupport password protection.78CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To remove the memory card password, selectOptionsRemove password. When you remove thepassword, the data on the memory card is notprotected against unauthorised use.To open a locked memory card, select OptionsUnlock memory card. Enter the password.If you cannot recall the password to unlock a lockedmemory card, you may reformat the card, in which casethe card is unlocked and password removed.Formatting a memory card destroys all data stored onthe card.EncryptionSelect MenuToolsEncryption.Encrypt your device or memory card to preventoutsiders from accessing your important information.Encrypt device memory ormemory cardTo encrypt the device memory, select Phonememory.To encrypt the memory card, select Memory card andfrom the following:ವEncrypt without saving key — Encrypt thememory card without saving the encryption key. Ifyou select this option, you cannot use the memorycard in other devices, and if you restore factorysettings, you cannot decrypt the memory card.ವEncrypt and save key — Encrypt the memory cardand save the key manually in the default folder. Forsecurity, store the key to a safe place outside thedevice. For example, you can send the key to yourcomputer. Enter a pass phrase for the key and aname for the key file. The pass phrase should be longand complex.ವEncrypt with restored key — Encrypt the memorycard with a key you have received. Select the key file,and enter the pass phrase.Decrypt device memory ormemory cardAlways remember to decrypt the device memory and/or the memory card before updating the devicesoftware.To decrypt the device memory, select Phonememory.To decrypt the memory card without destroying theencryption key, select Memory cardDecrypt.To decrypt the memory card and destroy theencryption key, select Memory cardDecrypt andturn off encryption.Fixed diallingSelect MenuCommunic.ContactsOptionsSIM contactsFixed dial contacts.With the fixed dialling service, you can restrict callsfrom your device to certain phone numbers. Not all SIM 79CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
cards support the fixed dialling service. Contact yourservice provider for more information.When fixed dialling is activated, calls may be possibleto the official emergency number programmed intoyour device.1. To restrict calls from your device, select OptionsNew SIM contact and enter the contact name andphone number to the list of numbers to which callsare allowed, or select Add from Contacts to copythe contact from Contacts. To restrict calls by acountry prefix, enter the country prefix in the list ofnumbers. All phone numbers to which calls areallowed must start with this country prefix.2. Select OptionsActivate fixed dialling. Youneed your PIN2 code to activate and deactivatefixed dialling or edit your fixed dialling contacts.Contact your service provider if you do not have thecode. To cancel the service, select OptionsDeactivate fixed dialling.Tip: To send text messages to the SIM contactswhile the fixed dialling service is active, youneed to add the text message centre number tothe fixed dialling list.Certificate managerSelect MenuToolsSettingsGeneralSecurityCertificate management.Digital certificates are used to verify the origins ofsoftware but do not guarantee safety. There are fourdifferent types of certificates: authority certificates,personal certificates, trusted site certificates, anddevice certificates. During a secure connection, a servermay send a server certificate to your device. Uponreceipt, it is checked through an authority certificatestored in your device. You receive notification if theidentity of the server is not authentic or if you do nothave the correct certificate in your device.Download a certificate from a web site, or receive acertificate as an e-mail attachment, or as a messagesent through a Bluetooth or infrared connection.Certificates should be used when you connect to anonline bank or a remote server to transfer confidentialinformation. They should also be used if you want toreduce the risk of viruses or other malicious software,and to check the authenticity of software when youdownload and install software to your device.Tip: When you add a new certificate, check itsauthenticity.View certificate detailsYou can only be sure of the correct identity of a serverwhen the signature and the validity period of a servercertificate have been checked.To view certificate details, select View details.One of the following notes may appear:ವCertificate not trusted — You have not set anyapplication to use the certificate. You may want tochange the trust settings.ವExpired certificate — The period of validity hasended for the selected certificate.ವCertificate not valid yet — The period of validityhas not yet begun for the selected certificate.80CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವCertificate corrupted — The certificate cannot beused. Contact the certificate issuer.Certificate trust settingsTrusting a certificate means that you authorise it toverify web pages, e-mail servers, software packages,and other data. Only trusted certificates can be used toverify services and software.Important: Even if the use of certificates makesthe risks involved in remote connections and softwareinstallation considerably smaller, they must be usedcorrectly in order to benefit from increased security.The existence of a certificate does not offer anyprotection by itself; the certificate manager mustcontain correct, authentic, or trusted certificates forincreased security to be available. Certificates have arestricted lifetime. If "Expired certificate" or "Certificatenot valid yet" is shown, even if the certificate shouldbe valid, check that the current date and time in yourdevice are correct.Before changing any certificate settings, you mustmake sure that you really trust the owner of thecertificate and that the certificate really belongs to thelisted owner.To change the trust settings, select a certificate andOptionsTrust settings. Select an application fieldand press the scroll key to select Yes or No. You cannotchange the trust settings of a personal certificate.Depending on the certificate, a list of applications thatcan use the certificate is displayed:ವSymbian installation  — New Symbian operatingsystem application.ವInternet  — E-mail and graphics.ವApp. installation  — New Java™ application.ವOnline certif. check  — Online certificate statusprotocol.Back up dataIt is recommended to back up device memory regularlyto the memory card or a compatible computer.To back up information from the device memory to amemory card, select MenuToolsMemoryOptionsBack up phone memory.To restore information from the memory card to thedevice memory, select MenuToolsMemoryOptionsRestore from card.You can also connect your device to a compatiblecomputer and use Nokia PC Suite to back up data.Application managerSelect MenuInstallationsApp. mgr..You can install two types of applications and softwareon your device:ವApplications and software specifically intended foryour device or compatible with the Symbianoperating system. These software installation fileshave the extension .sis or .sisx.81CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವJava ME™ applications compatible with the Symbianoperating system. The Java application installationfile extensions are .jad or .jar.Installation files may be transferred to your devicefrom a compatible computer, downloaded duringbrowsing, or sent to you in a multimedia message, asan e-mail attachment, or with Bluetooth.During the installation, the device checks the integrityof the package to be installed. The device showsinformation about the checks being carried out, andyou are given options to continue or cancel theinstallation.If you install applications that require a networkconnection, note that the power consumption of yourdevice may increase when you use these applications.Tip: When browsing web pages, you candownload an installation file and install itimmediately. Note, however, that theconnection runs in the background during theinstallation.Install applicationsImportant: Only install and use applications andother software from trusted sources, such asapplications that are Symbian Signed or have passedthe Java Verified™ testing.To download and install software from the web, selectDownload applications. Select the application andOptionsInstall.To view the details of an installed software package,select the application and OptionsView details.To view the installation log, select OptionsViewlog. A list shows what software has been installed andremoved, and the date of the installation or removal.If you encounter problems with the device afterinstalling a software package, use this list to find outwhich software package may be the cause of theproblem. The information in this list may also help youpinpoint problems that are caused by softwarepackages that are incompatible with each other.To remove software, select OptionsRemove. If youremove software, you can only reinstall it by using theoriginal software package file, or by restoring a fullbackup that contains the removed software package.If you remove a software package, you may no longerbe able to open files created with that software. Ifanother software package depends on the softwarepackage that you removed, the other software packagemay stop working. Refer to the documentation of theinstalled software package for details.Data synchronisationSelect MenuToolsSync.With Sync, you can synchronise your contacts, calendarentries, or notes with corresponding applications on acompatible computer or remote internet server. Yoursynchronisation settings are saved in asynchronisation profile. The Sync application uses82CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SyncML technology for remote synchronisation. Forinformation on SyncML compatibility, contact thesupplier of the applications with which you want tosynchronise your device.You may receive the synchronisation settings as amessage from your service provider. The availableapplications you can synchronise may vary. Contactyour service provider for more information.Create a synchronisationprofileThere is a Nokia PC Suite synchronisation profileavailable in your device. You do not need to edit it ifyou synchronise your device with a computer usingNokia PC Suite.To create a new profile, select OptionsNew syncprofile and assign a name for the profile, select theapplications to synchronise with the profile, andspecify the needed connection settings. Contact yourservice provider for details.Mobile VPNSelect MenuToolsSettingsConnectionVPN.The Nokia mobile virtual private network (VPN) clientcreates a secure connection to compatible corporateintranet and services, such as e-mail. Your deviceconnects from a mobile network, through the internet,to a corporate VPN gateway that acts as a front door tothe compatible corporate network. VPN client uses IPSecurity (IPSec) technology. IPSec is a framework ofopen standards for supporting secure exchange of dataover IP networks.VPN policies define the method used by the VPN clientand a VPN gateway to authenticate each other, and theencryption algorithms that they use to help protect theconfidentiality of data. Contact your company's ITdepartment for a VPN policy.To install and configure the VPN client, certificates, andpolicies, contact the IT administrator of yourorganisation.Manage VPNSelect VPN, and from the following:ವVPN policies — Install, view, and update VPNpolicies.ವVPN policy servers — Edit the connection settingsof VPN policy servers from which you can install andupdate VPN policies. A policy server refers to a NokiaSecurity Service Manager (NSSM), which is notnecessarily required.ವVPN log — View the log for your VPN policyinstallations, updates and synchronisations, andother VPN connections.Create VPN access pointsSelect SettingsConnectionDestinations.An access point is where your phone connects to thenetwork by way of WLAN or packet data connection. Touse e-mail and multimedia services or to browse webpages you must first define internet access points for83CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
these services. VPN access points pair VPN policies withregular internet access points to create secureconnections.Your service provider may preset some or all accesspoints for your device, and you may not be able tocreate, edit, or remove them.Contact your company's IT department for the correctsettings.Open a destination, select a VPN access point, selectEdit, and define the following:ವConnection name  — Enter a name for the VPNaccess point.ವVPN policy — Select the VPN policy to combine withthe internet access point.ವInternet access point — Select the internet accesspoint with which to combine the VPN policy tocreate secure connections for data transfer.ವProxy server address — Enter the proxy serveraddress of the private network.ವProxy port number — Enter the proxy portnumber.Use a VPN connection in anapplicationYou may have to prove your identity when you log onto the enterprise network. Contact your company's ITdepartment for the credentials.To use a VPN connection in an application, theapplication must be associated with a VPN access point.Tip: You can configure the application'sconnection setting to Always ask, in which caseyou select the VPN access point from a list ofconnections when a connection is established.1. In the application in which you want to create a VPNconnection, select a VPN access point as the accesspoint.2. If you are using legacy authentication, enter yourVPN user name and passcode or password. If theSecurID token has become out of synchronisationwith the clock of the ACE/Server, enter the nextpasscode. If you are using certificate-basedauthentication, you may have to enter the key storepassword.Barcode readerSelect MenuToolsBarcode.Use the Barcode reader application to decode differenttypes of barcodes. The codes may contain informationsuch as URL links, e-mail addresses, and phonenumbers. The Barcode reader uses the camera in yourdevice to scan codes.To scan a code, select Scan code, and set the codebetween the red lines on the display. The decodedinformation appears on the display.To save the scanned data, select OptionsSave. Thedata is saved in .bcr format.To view previously saved, decoded information in themain view, select Saved data.84CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
SettingsSelect MenuToolsSettings.You can define and modify various settings of yourdevice. Modifying these settings affects the operationof your device across several applications.Some settings may be preset for the device or sent toyou in a special message by your service provider. Youmay not be able to change such settings.Select the setting you want to edit to do the following:ವSwitch between two values, such as on or off.ವSelect a value from a list.ವOpen a text editor to enter a value.ವOpen a slider to decrease or increase the value byscrolling left or right.General settingsSelect MenuToolsSettingsGeneral.Personalisation settingsSelect MenuToolsSettingsGeneralPersonalisation.Display settingsTo turn the automatic display rotation on or off, selectDisplayDisplay rotation.To select whether you want the image to change to fullscreen in the landscape mode, select DisplayTurnto full view.To define the level of light that the device needs beforeswitching on the backlight, select DisplayLightsensor.To change the text size, select DisplayFont size.To adjust the length of time the display can be left idlebefore the screen saver is activated, select DisplayPower saver time-out.To select a welcome note or logo for the display, selectDisplayWelcome note / logo. You can eitherchoose the default welcome note, enter your own text,or select an image.To set how quickly the display dims after the lastkeypress, select DisplayLight time-out.Standby mode settingsTo select whether to use the home screen, select HomescreenHome screen.85CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To change the home screen mode settings, selectHome screenMode settings.To assign shortcuts for the device keys, select HomescreenKey shortcuts. These shortcuts are notavailable in the home screen.To select whether to show or hide the operator logo,select Home screenOperator logoOn or Off.To select the mailbox that is shown in the home screen,select Home screenHome screen mailbox.Tone settingsTo select a ringing tone for voice calls, select TonesRinging tone.To select a ringing tone for video calls, select TonesVideo call tone.To set the ringing type, select TonesRingingtype. You can also set the device to sound a ringingtone that is a combination of the spoken name of thecaller and the selected ringing tone, when someonefrom your contacts list calls you. Select TonesSaycaller's name.To set the volume level of the ringing tone, selectTonesRinging volume.To set the various alert tones, select TonesMessagealert tone,E-mail alert tone,Calendar alarm tone,or Clock alarm tone.To set the device to vibrate when you receive a call,select TonesVibrating alert.To set the volume level of the device keypad tones,select TonesKeypad tones.To set the warning tones on or off, select TonesWarning tones.To select whether you want the alarms and incomingcalls to be silenced when you turn the device facedown, select Turn to silence.To select whether you want the alarms and incomingcalls to be silenced when you tap the device twice,select Tap to silence.Language settingsTo set the language used on the device display, selectLanguagePhone language.To select the language in which you write notes andmessages, select LanguageWriting language.To select whether to use the predictive text input,select LanguagePredictive text.Notification lightWhen you receive a message or miss a call, the scrollkey starts blinking to indicate the event.To set the length of time you want the scroll key toblink, select Notification lightBlink light for.To select of which events you want to be notified, selectNotification lightNotified events.Settings for One-touch keysSelect MenuToolsSettingsGeneralPersonalisationOne-touch keys.To select which application and task is opened whenyou press a One-touch key, select the key andOptionsOpen.86CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To restore the preset applications and tasks, selectRestore defaults.Date and time settingsSelect MenuToolsSettingsGeneralDateand time.To set the current date and time, select Date andTime.To define your time zone, select Time zone.To update the time, date, and time zone informationautomatically (network service), select Networkoperator timeAuto-update.To select whether to use the 12-hour or 24-hour clocksystem and with which symbol to separate hours andminutes, select Time format and Time separator.To determine the date format and separator, selectDate format and Date separator.To define the clock type, select Clock typeAnalogue or Digital.To select the tone for the alarm clock, select Clockalarm tone.To determine the week days that are work days for you,select Workdays.Slide settingsSelect MenuToolsSettingsGeneralSlidehandling.To select whether you want to answer a call by openingthe slide, select Opening the slide.To select whether you want to end a call by closing theslide, select Closing the slide.To select whether you want to lock the keypad whenyou close the slide, select Keyguard activation.Enhancement settingsSelect MenuToolsSettingsGeneralEnhancement.Common enhancement settingsWith most enhancements, you can do the following:To determine which profile is activated when youattach an enhancement to your device, select Defaultprofile.To let the device answer phone calls automatically after5 seconds when an enhancement is attached, selectAutomatic answerOn. If the ringing type is set toBeep once or Silent in the selected profile, theautomatic answer is disabled.To illuminate the device while it is attached to anenhancement, select LightsOn.E-mail key settingsTo select which mailbox to open with the e-mail key,select E-mail key settingsE-mail key, and pressthe scroll key. 87CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Security settingsSelect MenuToolsSettingsGeneralSecurity.Avoid using codes that are similar to emergencynumbers to prevent accidental dialling of theemergency number. Codes are shown as asterisks.When you change a code, enter the current code, thenthe new code twice.Device and SIM card securityTo change the PIN code, select Phone and SIM cardPIN code. The new code must be 4 to 8 digits long. ThePIN code protects your SIM card against unauthoriseduse and is provided with the SIM card. After threeconsecutive incorrect PIN code entries, the code isblocked, and you need to use the PUK code to unblockit before you can use the SIM card again.To set the keypad to lock automatically after a definedperiod, select Phone and SIM cardKeypadautolock period.To set a time-out after which the device isautomatically locked and can be used only if the correctlock code is entered, select Phone and SIM cardPhone autolock period. Enter a number for the time-out in minutes, or select None to set off the autolockperiod. When the device is locked, you can still answerincoming calls, and calls may still be possible to theofficial emergency number programmed into yourdevice.To set a new lock code, select Phone and SIM cardLock code. The preset lock code is 12345. Enter thecurrent code and then the new code twice. The newcode can be 4-255 characters long. Both alphabets anddigits can be used, and both uppercase and lowercasealphabets are possible. The device notifies you if thelock code is not properly formatted.Restore original settingsTo restore the original device settings, select Factorysettings. To do this, you need your device lock code.After resetting, the device may take a longer time topower on. Documents, contact information, calendarentries, and files are unaffected.Telephone settingsSelect MenuToolsSettingsPhone.Call settingsTo display your phone number to the person you arecalling, select CallSend my caller IDYes. To letthe network determine whether your caller ID is sent,select Set by network.To display your net call address to the person you arecalling using a net call, select CallSend my internetcall IDYes.To be notified of a new incoming call while you have acall in progress, select CallCall waitingOptionsActivate. To check if the function is activeon the network, select OptionsCheck status.88CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
To select whether net calls alert or not, select CallInternet call alert. You are notified of missed net callswith a notification.To set the default call type, select CallDefault calltype and select Voice call if you make a GSM calls, orInternet call if you make net calls.To send a text message automatically to the personwho is calling you informing why you cannot answerthe incoming call, select CallReject call withSMSYes. To set the text for the message, selectCallMessage text.To set off the contact search on the home screen, selectCallContact searchOff.Network settingsSelect MenuToolsSettingsPhoneNetwork.To select the network mode, select Network modeand Dual mode,UMTS, or GSM. In the dual mode, thedevice switches automatically between networks.Tip: UMTS enables faster data transfer, but mayincrease the demand on battery power andreduce the battery life. In regions close to bothGSM and UMTS networks, selecting Dual modemay cause constant jumping between the twonetworks, which also increases the demand onbattery power.To select the operator, select Operator selection andManual to choose from available networks, orAutomatic to have the device select the networkautomatically.To set the device to indicate when it is used in MicroCellular Network (MCN), select Cell info displayOn.Connection settingsSelect MenuToolsSettingsConnection.Access pointsSelect MenuToolsSettingsConnectionAccess points.An internet access point is a collection of settings,which define how the device creates a data connectionto the network. To use e-mail and multimedia servicesor to browse web pages, you must first define accesspoints for these services.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.To create a new access point, select OptionsNewaccess point or select an existing access point from thelist and then OptionsDuplicate access point to usethe access point as a basis for the new one.Packet data (GPRS) settingsSelect MenuToolsSettingsConnectionPacket data.Your device supports packet data connections, such asGPRS in the GSM network. When you are using your 89CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
device in GSM and UMTS networks, it is possible to havemultiple data connections active at the same time;access points can share a data connection, and dataconnections remain active, for example, during voicecalls. See "Connection manager", p. 76.To define the packet data settings, select Packet dataconnection and select When available to register thedevice to the packet data network when you switch thedevice on in a supported network, or When needed toestablish a packet data connection only when anapplication or action requires it. Select Access pointand enter the access point name provided by yourservice provider to use the device as a packet datamodem to your computer. To use a high-speed dataconnection, select High speed packet accessEnabled.These settings affect all access points for packet dataconnections.WLAN settingsSelect MenuToolsSettingsConnectionWireless LAN.To have an indicator displayed when there is a WLANavailable in your current location, select Show WLANavailabilityYes.To select the interval for your device to scan foravailable WLANs and update the indicator, select Scanfor networks. This setting is not available unless youselect Show WLAN availabilityYes.WLAN security settingsSelect MenuToolsSettingsConnectionAccess pointsOptionsNew access point, orselect an access point and OptionsEdit.In the access point settings, select WLAN securitymode and the desired mode.Session initiation protocol(SIP) settingsSelect MenuToolsSettingsConnectionSIP settings.Session initiation protocols (SIP) are used for creating,modifying, and terminating certain types ofcommunication sessions with one or more participants(network service). Typical communication sessions arevideo sharing and net calls. SIP profiles include settingsfor these sessions. The SIP profile used by default for acommunication session is underlined.To create a SIP profile, select OptionsNew SIPprofileUse default profile or Use existingprofile.To select the SIP profile you want to use by default forcommunication sessions, select OptionsDefaultprofile.Edit SIP profilesSelect OptionsEdit, and select from the following:ವProfile name — Enter a name for the SIP profile.90CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವService profile — Select IETF or Nokia 3GPP.ವDefault access point — Select the access point touse for the internet connection.ವPublic user name — Enter your user name receivedfrom your service provider.ವUse compression — Select if compression is used.ವRegistration — Select the registration mode.ವUse security — Select if security negotiation isused.ವProxy server — Enter the proxy server settings forthis SIP profile.ವRegistrar server — Enter the registration serversettings for this SIP profile.Net call settingsSelect MenuToolsSettingsConnectionInternet tel..To create a new net call profile, select OptionsNewprofile.To edit an existing profile, select OptionsEdit.Configuration settingsSelect MenuToolsSettingsConnectionConfigurations.You can receive messages from your service provideror company information management containingconfiguration settings for trusted servers. Thesesettings are automatically saved in Configurations.You may receive configuration settings for accesspoints, multimedia, or e-mail services, and IM orsynchronisation settings from trusted servers.To delete configurations for a trusted server, selectOptionsDelete. The configuration settings forother applications provided by this server are alsodeleted.Restrict packet dataSelect MenuToolsSettingsConnectionAPN control.With the access point control service, you can restrictpacket data connections from your device to certainaccess points only. Your SIM card may not support theaccess point control service. Contact your serviceprovider for more information.To restrict the packet data connections from yourdevice, select OptionsActivate restrictions. Youneed your PIN2 code to activate and deactivate accesspoint control or to edit the packet data access pointson the control list.To add access points that can be used for packet dataconnections to the control list, select OptionsAddname manually. To enable connections to anoperator-provided access point, create an emptyaccess point.To remove access points from the list, select OptionsRemove.Application settingsSelect MenuToolsSettingsApplications.Select an application from the list to adjust its settings. 91CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ShortcutsHere are some of the available keyboard shortcuts inyour device. Shortcuts can make the use of theapplications more efficient.General shortcutsGeneral shortcutsPower key Press and hold to switch your deviceon and off.Press once to switch betweenprofiles.Home screenLeft selectionkey + *Lock and unlock the keypad.Call key Open the call log.0Press and hold to open your homepage in the Web browser.#Press and hold to switch betweenthe Silent and General profiles.1Press and hold to call your voicemailbox.Number key (2–9)Call a phone number using 1-touchdialing. You must first activate 1-touch dialing at MenuToolsSettingsPhoneCallSpeed diallingOn.Web*Zoom in the page.#Zoom out the page.2Open the search dialog.5View the active pages.8View the page overview.9Open the dialog for entering a newweb address.0Open the bookmarks folder.92CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
EnhancementsWarning: Use only batteries, chargers, andenhancements approved by Nokia for use with thisparticular model. The use of any other types mayinvalidate any approval or warranty, and may bedangerous.For availability of approved enhancements, pleasecheck with your dealer. When you disconnect thepower cord of any enhancement, grasp and pull theplug, not the cord.93CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Battery and charger informationBattery and chargerinformationYour device is powered by a rechargeable battery. Thebattery intended for use with this device is BL-4F. Thisdevice is intended for use when supplied with powerfrom the following chargers: AC-5. The battery can becharged and discharged hundreds of times, but it willeventually wear out. When the talk and standby timesare noticeably shorter than normal, replace thebattery. Use only Nokia approved batteries, andrecharge your battery only with Nokia approvedchargers designated for this device. Use of anunapproved battery or charger may present a risk offire, explosion, leakage, or other hazard.The exact charger model number may vary dependingon the type of plug. The plug variant is identified byone of the following: E, EB, X, AR, U, A, C, or UB.If a battery is being used for the first time or if thebattery has not been used for a prolonged period, itmay be necessary to connect the charger, thendisconnect and reconnect it to begin charging thebattery. If the battery is completely discharged, it maytake several minutes before the charging indicatorappears on the display or before any calls can be made.Always switch the device off and disconnect thecharger before removing the battery.Unplug the charger from the electrical plug and thedevice when not in use. Do not leave a fully chargedbattery connected to a charger, since overchargingmay shorten its lifetime. If left unused, a fully chargedbattery will lose its charge over time.Always try to keep the battery between 15°C and 25°C(59°F and 77°F). Extreme temperatures reduce thecapacity and lifetime of the battery. A device with a hotor cold battery may not work temporarily. Batteryperformance is particularly limited in temperatureswell below freezing.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as acoin, clip, or pen causes direct connection of thepositive (+) and negative (-) terminals of the battery.(These look like metal strips on the battery.) This mighthappen, for example, when you carry a spare batteryin your pocket or purse. Short-circuiting the terminalsmay damage the battery or the connecting object.Do not dispose of batteries in a fire as they mayexplode. Batteries may also explode if damaged.Dispose of batteries according to local regulations.Please recycle when possible. Do not dispose ashousehold waste.94CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Do not dismantle, cut, open, crush, bend, deform,puncture, or shred cells or batteries. In the event of abattery leak, do not allow the liquid to come in contactwith the skin or eyes. In the event of such a leak, flushyour skin or eyes immediately with water, or seekmedical help.Do not modify, remanufacture, attempt to insertforeign objects into the battery, or immerse or exposeit to water or other liquids.Improper battery use may result in a fire, explosion, orother hazard. If the device or battery is dropped,especially on a hard surface, and you believe thebattery has been damaged, take it to a service centrefor inspection before continuing to use it.Use the battery only for its intended purpose. Never useany charger or battery that is damaged. Keep yourbattery out of the reach of small children.Nokia batteryauthenticationguidelinesAlways use original Nokia batteries for your safety. Tocheck that you are getting an original Nokia battery,purchase it from an authorised Nokia dealer, andinspect the hologram label using the following steps:Successful completion of the steps is not a totalassurance of the authenticity of the battery. If you haveany reason to believe that your battery is not anauthentic, original Nokia battery, you should refrainfrom using it, and take it to the nearest authorisedNokia service point or dealer for assistance. Yourauthorised Nokia service point or dealer will inspectthe battery for authenticity. If authenticity cannot beverified, return the battery to the place of purchase.Authenticate hologram1. When you look at the hologramon the label, you should see theNokia connecting handssymbol from one angle and theNokia Original Enhancementslogo when looking fromanother angle.2. When you angle the hologramleft, right, down and up, youshould see 1, 2, 3 and 4 dots oneach side respectively.What if your battery is notauthentic?If you cannot confirm that your Nokia battery with thehologram on the label is an authentic Nokia battery,please do not use the battery. Take it to the nearestauthorised Nokia service point or dealer for assistance.The use of a battery that is not approved by themanufacturer may be dangerous and may result in 95CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
poor performance and damage to your device and itsenhancements. It may also invalidate any approval orwarranty applying to the device.For additional information, refer to the warranty andreference leaflet included with your Nokia device.96CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Care and maintenanceYour device is a product of superior design andcraftsmanship and should be treated with care. Thefollowing suggestions will help you protect yourwarranty coverage.ವKeep the device dry. Precipitation, humidity, and alltypes of liquids or moisture can contain mineralsthat will corrode electronic circuits. If your devicedoes get wet, remove the battery, and allow thedevice to dry completely before replacing it.ವDo not use or store the device in dusty, dirty areas.Its moving parts and electronic components can bedamaged.ವDo not store the device in hot areas. Hightemperatures can shorten the life of electronicdevices, damage batteries, and warp or melt certainplastics.ವDo not store the device in cold areas. When thedevice returns to its normal temperature, moisturecan form inside the device and damage electroniccircuit boards.ವDo not attempt to open the device other than asinstructed in this guide.ವDo not drop, knock, or shake the device. Roughhandling can break internal circuit boards and finemechanics.ವDo not use harsh chemicals, cleaning solvents, orstrong detergents to clean the device.ವDo not paint the device. Paint can clog the movingparts and prevent proper operation.ವUse a soft, clean, dry cloth to clean any lenses, suchas camera, proximity sensor, and light sensor lenses.ವUse only the supplied or an approved replacementantenna. Unauthorised antennas, modifications, orattachments could damage the device and mayviolate regulations governing radio devices.ವUse chargers indoors.ವAlways create a backup of data you want to keep,such as contacts and calendar notes.ವTo reset the device from time to time for optimumperformance, power off the device and remove thebattery.These suggestions apply equally to your device,battery, charger, or any enhancement. If any device isnot working properly, take it to the nearest authorisedservice facility for service.97CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
DisposalThe crossed-out wheeled-bin symbol on yourproduct, literature, or packaging reminds youthat all electrical and electronic products,batteries, and accumulators must be taken toseparate collection at the end of their working life. Thisrequirement applies to the European Union and otherlocations where separate collection systems areavailable. Do not dispose of these products as unsortedmunicipal waste.By returning the products to collection you helpprevent uncontrolled waste disposal and promote thereuse of material resources. More detailed informationis available from the product retailer, local wasteauthorities, national producer responsibilityorganizations, or your local Nokia representative. Forthe product Eco-Declaration or instructions forreturning your obsolete product, go to country-specificinformation at www.nokia.com.98CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Additional safety informationSmall childrenYour device and its enhancements may contain smallparts. Keep them out of the reach of small children.OperatingenvironmentThis device meets RF exposure guidelines when usedeither in the normal use position against the ear orwhen positioned at least 2.2 centimetres (7/8 inch)away from the body. When a carry case, belt clip, orholder is used for body-worn operation, it should notcontain metal and should position the device theabove-stated distance from your body.To transmit data files or messages, this device requiresa quality connection to the network. In some cases,transmission of data files or messages may be delayeduntil such a connection is available. Ensure the aboveseparation distance instructions are followed until thetransmission is completed.Parts of the device are magnetic. Metallic materialsmay be attracted to the device. Do not place creditcards or other magnetic storage media near the device,because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment,including wireless phones, may interfere with thefunctionality of inadequately protected medicaldevices. Consult a physician or the manufacturer of themedical device to determine if they are adequatelyshielded from external RF energy or if you have anyquestions. Switch off your device in health carefacilities when any regulations posted in these areasinstruct you to do so. Hospitals or health care facilitiesmay be using equipment that could be sensitive toexternal RF energy.Implanted medical devicesManufacturers of medical devices recommend that aminimum separation of 15.3 centimetres (6 inch)should be maintained between a wireless device andan implanted medical device, such as a pacemaker orimplanted cardioverter defibrillator, to avoid potentialinterference with the medical device. Persons whohave such devices should:ವAlways keep the wireless device more than 15.3centimetres (6 inch) from the medical device whenthe wireless device is turned on. 99CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
ವNot carry the wireless device in a breast pocket.ವHold the wireless device to the ear opposite themedical device to minimise the potential forinterference.ವTurn the wireless device off immediately if there isany reason to suspect that interference is takingplace.ವRead and follow the directions from themanufacturer of their implanted medical device.If you have any questions about using your wirelessdevice with an implanted medical device, consult yourhealth care provider.Hearing aidsSome digital wireless devices may interfere with somehearing aids. If interference occurs, consult yourservice provider.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles such as electronic fuel injection systems,electronic antiskid (antilock) braking systems,electronic speed control systems, and air bag systems.For more information, check with the manufacturer, orits representative, of your vehicle or any equipmentthat has been added.Only qualified personnel should service the device orinstall the device in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty that may apply to the device. Check regularlythat all wireless device equipment in your vehicle ismounted and operating properly. Do not store or carryflammable liquids, gases, or explosive materials in thesame compartment as the device, its parts, orenhancements. For vehicles equipped with an air bag,remember that air bags inflate with great force. Do notplace objects, including installed or portable wirelessequipment in the area over the air bag or in the air bagdeployment area. If in-vehicle wireless equipment isimproperly installed and the air bag inflates, seriousinjury could result.Using your device while flying in aircraft is prohibited.Switch off your device before boarding an aircraft. Theuse of wireless teledevices in an aircraft may bedangerous to the operation of the aircraft, disrupt thewireless telephone network, and may be illegal.Potentially explosiveenvironmentsSwitch off your device when in any area with apotentially explosive atmosphere, and obey all signsand instructions. Potentially explosive atmospheresinclude areas where you would normally be advised toturn off your vehicle engine. Sparks in such areas couldcause an explosion or fire resulting in bodily injury oreven death. Switch off the device at refuelling pointssuch as near gas pumps at service stations. Observerestrictions on the use of radio equipment in fueldepots, storage, and distribution areas; chemicalplants; or where blasting operations are in progress.100CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
Areas with a potentially explosive atmosphere areoften, but not always, clearly marked. They includebelow deck on boats, chemical transfer or storagefacilities and areas where the air contains chemicals orparticles such as grain, dust, or metal powders. Youshould check with the manufacturers of vehicles usingliquefied petroleum gas (such as propane or butane) todetermine if this device can be safely used in theirvicinity.Emergency callsImportant: This device operates using radiosignals, wireless networks, landline networks, anduser-programmed functions. If your device supportsvoice calls over the internet (internet calls), activateboth the internet calls and the cellular phone. Thedevice will attempt to make emergency calls over boththe cellular networks and through your internet callprovider if both are activated. Connections in allconditions cannot be guaranteed. You should neverrely solely on any wireless device for essentialcommunications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check foradequate signal strength. Depending on yourdevice, you may also need to complete thefollowing:ವInsert a SIM card if your device uses oneವRemove certain call restrictions you haveactivated in your device.ವChange your profile from offline or flight profilemode to an active profile.2. Press the end key as many times as needed to clearthe display and ready the device for calls.3. Enter the official emergency number for yourpresent location. Emergency numbers vary bylocation.4. Press the call key.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wirelessdevice may be the only means of communication at thescene of an accident. Do not end the call until givenpermission to do so.CERTIFICATIONINFORMATION (SAR)This mobile device meets guidelines for exposureto radio waves.Your mobile device is a radio transmitter and receiver.It is designed not to exceed the limits for exposure toradio waves recommended by internationalguidelines. These guidelines were developed by theindependent scientific organisation ICNIRP and includesafety margins designed to assure the protection of allpersons, regardless of age and health.The exposure guidelines for mobile devices employ aunit of measurement known as the Specific AbsorptionRate or SAR. The SAR limit stated in the ICNIRPguidelines is 2.0 watts/kilogram (W/kg) averaged over10 grams of tissue. Tests for SAR are conducted using101CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
standard operating positions with the devicetransmitting at its highest certified power level in alltested frequency bands. The actual SAR level of anoperating device can be below the maximum valuebecause the device is designed to use only the powerrequired to reach the network. That amount changesdepending on a number of factors such as how closeyou are to a network base station. The highest SARvalue under the ICNIRP guidelines for use of the deviceat the ear is 1.08 W/kg.Use of device accessories and enhancements mayresult in different SAR values. SAR values may varydepending on national reporting and testingrequirements and the network band. Additional SARinformation may be provided under productinformation at www.nokia.com.Your mobile device is also designed to meet therequirements for exposure to radio waves establishedby the Federal Communications Commission (USA) andIndustry Canada. These requirements set a SAR limit of1.6 W/kg averaged over one gram of tissue. The highestSAR value reported under this standard during productcertification for use at the ear is 0.93 W/kg and whenproperly worn on the body is 0.81 W/kg.102CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
IndexSymbols/Numerics1-touch dialing 58Aaccess pointscreating 89VPN 83Active notes 66alarm clock 69alert tones 86altitude calibration 65animated screen saver 32antennas 15application settings 91applicationscommon actions 19installing 82attachmentse-mail 47autolock period 88Bbackground image 32backing up data 81barcodes 84batterycharge level 20charging 14inserting 13Bluetoothauthorising devices 73pairing 73passcode 73receiving data 72security 74sending data 72bookmarks 41browsingintranet 41offline 41web 40Ccable 71cacheemptying 41Calculator 66Calendarsettings 28calendar entriescreating 27viewing 27calendar key 26calendar viewschanging 27caller ID 88calls1-touch dialing 58answering 54call waiting 88caller ID 88conference call 55fixed dialling 79making 54making a net call 58muting the ringing tone 54net call alert 88rejecting 54rejecting with textmessage 88selecting type 88settings 88voice commands 59voice dialling 59voice mail 58cameracapturing images 33toolbar 33video clips 33certificatesdetails 80settings 81charging the battery 14Clockalarms 69settings 69conference calls 55configuration messages 91connection methodsBluetooth 72103CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
data cable 71modem 76connectionsending 76GPRS settings 42PC connection 44WLAN settings 43connectors 10contact groupsadding ringing tones 29creating 29making conference calls 29contactsadding 29adding ringing tones 29searching 29settings 29contacts directoriesmanaging 29contacts key 26convertingcurrencies 68measurements 68currency conversions 68Ddatesettings 87decryptingdevice memory and memorycard 79destinationremoving 65setting 65displaychanging the look 32indicators 20settings 85display rotation 11settings 85Download!managing items 42Ee-mailautomatic retrievalsettings 52connecting to mailbox 46connection settings 51creating folders 48deleting 48replying 47retrieval settings 52sending 47user settings 51writing 47e-mail key 27e-mail key settings 87e-mail setup 46e-mail wizard 46encryptingdevice memory and memorycard 79endinginternet connections 41network connections 76enhancementssettings 87FFile manager 67filesdownloading 36flash files 38sending 67fixed dialling 79Flash player 38free memory 21GGallery 36GPRSaccess point settings 42settings 89Hheadsetconnecting 15home key 26home screen 25settings 32, 85switching 26HSDPA (high-speed downlinkpacket access) 71IIM 49imagesrotating 37sharing online 36zooming 37indicators 20104CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
insertingbattery 13memory card 14SIM card 13installation log 82installingapplications 82Instant messaging 49internet 40ending connections 41internet calls 58intranetbrowsing 41Jjad files 82jar files 82Java applications 82Kkeyguard 12keypadlock settings 88locking 12tones 86keys 10shortcuts 85Llandmarkscreating 65languagechanging 24settings 86lock code 78, 88lockingdevice 78device autolock 88keypad 12, 88Log 60adding numbers toContacts 60deleting 60logosoperator logo 85welcome logo 85Mmailboxesconnecting 46making a call 54Maps 62, 63browsing 63finding locations 64indicators 63routes 64measurementsconverting 68measuring systemchanging 65memory 21memory cardbacking up data 81formatting 22inserting 14locking 78microSD 22passwords 78setting password 22, 67unlocking 22menu 18messages 45call rejection messages 88configuration messages 91other settings 53text message settings 50Messagingfolders 45microSDHC 22modem 44, 76multimedia messagescreating 49sending 49settings 50multitasking 30Music playerMusic Store 35playing 35playlists 35transferring music 36Music Store 35Nnet callsalert settings 88connecting 57making a call 58profiles 57, 91settings 91network settings 89Notes 70notification light 86 105CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
OOne-touch keys 86operatorlogo 85selecting 89original settings 88Ppacket dataaccess point settings 42restricting 91settings 89pairingdevices 73passcode 73passwordsmemory card password 22,67PDF reader 68personalisation 32changing language 86display 85home screen 85tones 86PIN codechanging 88playingvideo and audio 37podcasting 34searching 34positioningsettings 62predictive text input 23, 86printing 68profilescreating 31customising 31net call profile 57, 91selecting ringing tones 31PTT 59push to talk 59QQuickoffice 67Rradiolistening to 38viewing visual content 39RealPlayerplaying media clips 37recorder 36remote lock 78remote synchronisation 83restoring original settings 88ringing tones 86contacts and contactgroups 29in profiles 31vibrating alert 86Ssatellite signal strength 65savingcurrent position 65files 19settings 19screen saver 32, 85scroll key lights 12search modesswitching 29searchingavailable WLANs 77securityBluetooth 74device and SIM card 88memory card 78sendingfiles 19, 67using Bluetooth 72videos 56session initiation protocolSeeSIPsettingsapplications 91Calendar 28calls 88certificate 81clock 69contacts 29date 87display 85e-mail connection 51e-mail key 87e-mail retrieval 52e-mail user 51enhancements 87GPRS 42, 89home screen 85keypad lock 88language 86multimedia messages 50net call 91106CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
network 89packet data 89positioning 62restoring 88SIP 90slide 87text messages 50time 87tones 86Web 41WLAN 90WLAN access point 43WLAN security 90shortcuts 92keys 85signal strength 20silencingalarms and incoming calls 11,86SIM cardinserting 13SIPcreating profiles 90editing profiles 90settings 90sis files 82sisx files 82slideopening and closing 12settings 87software packagesinstalling 82sound clips 36standby modesettings 85switching device on and off 17Symbian applications 82synchronisation synchronisation profiles 83Ttabs 19textchanging size 85letter mode 23number mode 23predictive input 23traditional input 23text messagessending 48settings 50writing 48themeschanging 32timesettings 87tones 86settings 86toolbarcamera 33traditional text input 23transferring data 19trip destination 65trip meter 65UUPIN codechanging 88USB data cable 71Vvibrating alert 86video callsmaking a call 55switching to voice call 55video clipsplaying 37video sharing 56receiving invitations 56virtual private networkaccess points 83use in applications 84Voice aid 58voice mailcalling 58changing number 58volume 21VPNaccess points 83use in applications 84Wwarning tones 86Webconnection security 40settings 41welcome note 85WLANaccess point settings 43access points 75availability 75MAC address 74, 90searching for networks 77security settings 90 107CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack
settings 90WLAN wizard 75writing language 24ZZip manager 68108CyanCyanMagentaMagentaYellowYellowBlackBlackCyanCyanMagentaMagentaYellowYellowBlackBlack

Navigation menu