Microsoft RM-346 GSM/WCDMA cellular phone w/BT andWLAN User Manual Manual

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT andWLAN Manual

UserManual.wiki >

Microsoft >

RM 346 User Manual HTML Version

Manual

E71 User Guide

9207112

Issue 1

Cyan

Magenta

Yellow

Black

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this RM-346 product is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at

www.nokia.com/phones/declaration_of_conformity/.

Nokia, Nokia Connecting People, Eseries, E71, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune is a sound

mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia

is prohibited.

Ltd.

Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which

has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in

connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,

including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this

document without prior notice.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY

LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION

TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME

WITHOUT PRIOR NOTICE.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains

any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,

damages and liabilities of Nokia's licensors.

The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for

details, and availability of language options.

Export controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion

contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry

Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service

facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or

modifications not expressly approved by Nokia could void the user's authority to operate this equipment.

9207112/Issue 1

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Contents

Safety...........................................................7

About your device...........................................................7

Network services.............................................................8

Battery removing............................................................8

E71 in brief...................................................9

Key features.....................................................................9

Keys and parts...............................................................10

Set up your device......................................12

Insert the SIM card and battery...................................12

Charge the battery........................................................13

Insert the memory card................................................13

Eject the memory card..................................................14

Connect the headset.....................................................14

Attach the wrist strap...................................................14

Antennas........................................................................14

Get started.................................................15

First start-up..................................................................15

Home screen..................................................................15

Menu...............................................................................16

Transfer..........................................................................16

Display indicators..........................................................17

Common actions in several applications....................19

Lock the keys.................................................................19

Volume control..............................................................20

Memory..........................................................................20

Write text.......................................................................21

Further information......................................................22

New from Eseries.......................................23

Access tasks quickly......................................................23

Home screen..................................................................23

One-touch keys..............................................................24

Nokia Calendar for Eseries............................................25

Nokia Contacts for Eseries............................................26

Multitasking...................................................................28

Phone.........................................................29

Voice calls.......................................................................29

Video calls......................................................................30

Net calls..........................................................................31

Speed dialling................................................................33

Voice mail......................................................................33

Voice aid.........................................................................33

Voice commands...........................................................34

Push to talk....................................................................35

Log..................................................................................35

Messaging..................................................36

Messaging folders.........................................................36

E-mail messages............................................................37

Write and send text messages....................................40

Multimedia messages...................................................40

Instant messaging........................................................41

Messaging settings.......................................................41

Internet......................................................45

Web................................................................................45

Browse the intranet .....................................................46

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Download!......................................................................47

Internet access points..................................................47

Connect PC to web.........................................................49

Travelling...................................................50

About GPS and satellite signals...................................50

Positioning settings......................................................51

Maps...............................................................................51

GPS data.........................................................................53

Landmarks.....................................................................54

Nokia Office Tools......................................55

Active notes...................................................................55

Calculator.......................................................................55

File manager..................................................................56

Quickoffice.....................................................................56

Converter........................................................................56

Zip manager...................................................................57

PDF reader......................................................................57

Printing .........................................................................57

Clock...............................................................................58

Notes..............................................................................59

Media..........................................................60

Camera...........................................................................60

Nokia Podcasting..........................................................61

Music player...................................................................62

Share online...................................................................63

Recorder.........................................................................63

Gallery............................................................................64

RealPlayer......................................................................64

Flash player....................................................................65

Radio..............................................................................65

Personalisation..........................................67

Profiles...........................................................................67

Select ringing tones......................................................67

Personalise the home screen.......................................68

Change the display theme............................................68

Connectivity...............................................69

Fast downloading.........................................................69

Data cable......................................................................69

Bluetooth.......................................................................70

Wireless LAN..................................................................72

Modem...........................................................................74

Connection manager....................................................74

Security and data management................76

Lock the device..............................................................76

Memory card security...................................................76

Encryption......................................................................77

Fixed dialling.................................................................77

Certificate manager......................................................78

Back up data..................................................................79

Application manager....................................................79

Data synchronisation....................................................80

Mobile VPN.....................................................................81

Barcode reader..............................................................82

Settings......................................................83

General settings............................................................83

Telephone settings.......................................................86

Connection settings......................................................87

Application settings......................................................89

Shortcuts....................................................90

General shortcuts..........................................................90

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Enhancements............................................91

Battery and charger information...............92

Battery and charger information................................92

Nokia battery authentication guidelines...................93

Care and maintenance...............................95

Disposal..........................................................................96

Additional safety information...................97

Small children................................................................97

Operating environment................................................97

Medical devices..............................................................97

Vehicles..........................................................................98

Potentially explosive environments............................98

Emergency calls.............................................................99

CERTIFICATION INFORMATION (SAR).............................99

Index........................................................101

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Safety

Read these simple guidelines. Not following them may

be dangerous or illegal. Read the complete user guide

for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless

phone use is prohibited or when it may

cause interference or danger.

INTERFERENCE

All wireless devices may be susceptible to

interference, which could affect

performance.

SWITCH OFF IN RESTRICTED AREAS

Follow any restrictions. Switch the device off

in aircraft, near medical equipment, fuel,

chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may install or

repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and

batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it

dry.

About your device

The wireless device described in this guide is approved

for use on the (E)GSM 850, 900, 1800, and 1900

networks, and UMTS 900/2100 HSDPA networks.

Contact your service provider for more information

about networks.

When using the features in this device, obey all laws

and respect local customs, privacy and legitimate

rights of others, including copyrights.

and other content from being copied, modified, or

transferred.

Your device supports several methods of connectivity.

Like computers, your device may be exposed to viruses

and other harmful content. Exercise caution with

messages, connectivity requests, browsing, and

downloads. Only install and use services and other

software from trustworthy sources that offer adequate

security and protection against harmful software, such

as applications that are Symbian Signed or have passed

the Java Verified™ testing. Consider installing antivirus

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

and other security software on your device and any

connected computer.

Your device may have preinstalled bookmarks and links

for third-party internet sites. You may also access other

third-party sites through your device. Third-party sites

are not affiliated with Nokia, and Nokia does not

endorse or assume liability for them. If you choose to

access such sites, you should take precautions for

security or content.

Warning: To use any features in this device, other

than the alarm clock, the device must be switched on.

Do not switch the device on when wireless device use

may cause interference or danger.

The office applications support common features of

Microsoft Word, PowerPoint, and Excel (Microsoft Office

2000, XP, and 2003). Not all file formats can be viewed

or modified.

Remember to make back-up copies or keep a written

record of all important information stored in your

device.

When connecting to any other device, read its user

guide for detailed safety instructions. Do not connect

incompatible products.

Network services

To use the phone you must have service from a wireless

service provider. Many of the features require special

network features. These features are not available on

all networks; other networks may require that you

make specific arrangements with your service provider

before you can use the network services. Your service

provider can give you instructions and explain what

charges will apply. Some networks may have

limitations that affect how you can use network

services. For instance, some networks may not support

all language-dependent characters and services.

Your service provider may have requested that certain

features be disabled or not activated in your device. If

so, these features will not appear on your device menu.

Your device may also have a special configuration such

as changes in menu names, menu order, and icons.

Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL)

that run on TCP/IP protocols. Some features of this

device, such as e-mail, browsing, and multimedia

messaging (MMS), require network support for these

technologies.

Battery removing

Always switch the device off and disconnect the

charger before removing the battery.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

E71 in brief

Model number: Nokia E71-1 (RM-346)

Hereinafter referred to as Nokia E71.

Key features

Your new Eseries device helps you manage your

business and personal information. Some of the key

features are highlighted here:

Read and reply to your e-mail while on the

move.

Stay up-to-date and plan your meetings with

Calendar.

Manage your business partners and free time

friends with the new Contacts application.

Make calls using voice over IP services with

Internet tel..

Connect to WLAN with WLAN wiz..

Work with documents, spreadsheets, and

presentations with Quickoffice.

Add new business applications to your

Eseries device with Download!.

Find points of interest with Maps.

Switch from business to personal mode to

balance your business and personal life.

Edit the appearance and setup of your home

screen with Modes.

Browse your company intranet with

Intranet.

Move your contact and calendar information

from a previous device to your E71 with

Switch.

When you see this icon in the home screen,

Contacts, or Calendar, scroll right to access a

list of available actions. 9

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Keys and parts

1 — Earpiece

2 — Light sensor

3 — Navi™ scroll key. Press the scroll key to enter a

selection, to scroll left, right, up, and down on the

display. A long press of the scroll key left, right, up, or

down accelerates the scrolling.

4 — Selection key. Press the selection key to perform

the function shown above it on the display.

5 — Call key

6 — Microphone

7 — Charger connector

8 — Power key

9 — Camera (video calls only)

10 — Selection key

11 — End key. Press the end key to reject a call, end

active calls and held calls, and with a long keypress, end

data connections.

12 — Backspace key

13 — Enter key

1 — Home key

2 — Contacts key

3 — Calendar key

4 — E-mail key

1 — Function key. To insert digits or characters printed

at the top of keys, press and hold the function key and

press the corresponding key, or press and hold the

corresponding key only. To enter only the characters

printed at the top of keys, press the function key twice

quickly.

2 — Shift key. To switch between the different

character cases, press the shift key.

3 — Chr key. When writing text, press the chr key to

insert characters not shown on the keypad. To access

the shortcuts behind the ctrl key, such as ctrl + c, press

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

the function key and the chr key to enter ctrl, and then

press the desired key, for example c.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Set up your device

Set up your E71 following these instructions.

Insert the SIM card and

battery

1. Press the release buttons and lift the back cover off.

2. If the battery is inserted, lift the battery in the

direction of the arrow to remove it.

3. Insert the SIM card. Make sure that the contact area

on the card is facing the connectors on the device

and that the bevelled corner is facing the top of the

device.

4. Insert the battery. Align the contacts of the battery

with the corresponding connectors on the battery

compartment and insert in the direction of the

arrow.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

5. Close the back cover.

Charge the battery

1. Connect a compatible charger to a wall outlet.

2. Connect the power cord to the device. If the battery

is completely discharged, it may take a while before

the charging indicator starts scrolling.

3. When the battery is fully charged, disconnect the

charger from the device, then from the wall outlet.

Your battery has been precharged at the factory, but

the charging levels may vary. To reach the full

operation time, charge the battery until it has been

fully charged according to the battery level indicator.

Tip: If you have old compatible Nokia chargers,

you can use them with the Nokia E71 by

attaching the CA-44 charger adapter to the old

charger. The adapter is available as a separate

enhancement.

Insert the memory

card

The sales package of your device may not include a

memory card. Memory cards are available as separate

enhancements.

1. Open the cover of the memory card slot.

2. Insert the memory card in the slot with the contact

area first. Make sure that the contact area is facing

the connectors on the device.

3. Push the card in until it locks into place. 13

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

4. Close the cover.

Eject the memory card

Important: Do not remove the memory card in the

middle of an operation when the card is being

accessed. Removing the card in the middle of an

operation may damage the memory card as well as the

device, and data stored on the card may be corrupted.

1. Press the power key briefly, and select Remove

memory card.

2. Open the cover of the memory card slot.

3. Press the end of the memory card to release it from

the memory card slot.

4. Close the cover.

Connect the headset

Warning: When you use the headset, your ability

to hear outside sounds may be affected. Do not use the

headset where it can endanger your safety.

Connect the compatible headset to the headset

connector of your device.

Attach the wrist strap

Thread the wrist strap as shown, and

tighten it.

Antennas

Your device may have internal and external antennas.

As with any radio transmitting device, avoid touching

the antenna area unnecessarily while the antenna is

transmitting or receiving. Contact with such an

antenna affects the communication quality and may

cause the device to operate at a higher power level

than otherwise needed and may reduce the battery

life.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Get started

After you have set up your device, switch it on and start

to explore what is new in Eseries.

First start-up

1. Press and hold the power key until

you feel the device vibrate.

2. If prompted, enter the PIN code or

lock code, and select OK.

3. When prompted, enter the country in

which you are located and the current

date and time. To find your country,

enter the first letters of the country

name. It is important to select the

correct country, because scheduled

calendar entries may change if you

change the country later and the new

country is located on a different time zone.

4. The Welcome application opens. Select from the

various options, or select Exit to close the

application.

To configure the various settings in your device, use

the wizards available on the home screen and the

Settings wizard application. When you switch the

device on, it may recognise the SIM card provider and

configure some settings automatically. You can also

contact your service provider for the correct settings.

You can switch the device on without inserting a SIM

card. The device starts up in the offline mode, and you

cannot use the network-dependent phone functions.

To switch the device off, press and hold the power key.

Home screen

From the home screen you can quickly access features

that you use the most, and see at a glance any missed

calls or new messages.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

You can define two separate home screens for different

purposes, such as one screen to show your business e-

mail and notifications, and another to show your

personal e-mail. This way, you do not have to see

business-related messages outside office hours.

Select Menu.

The menu is a starting point

from which you can open all

applications in the device or

on a memory card.

The menu contains

applications and folders,

which are groups of similar

applications. All

applications you install in

the device yourself are by

default saved in the

Installations folder.

To open an application,

scroll to it, and press the

scroll key.

To view the applications in a list, select Options >

Change view > List view. To return to the grid view,

select Options > Change view > Grid view.

To make the application icons and folders animated,

select Options > Icon animation > On.

To view the memory consumption of different

applications and data stored on the device or memory

card and to check the amount of free memory, select

Options > Memory details.

To create a new folder, select Options > New

folder.

To rename a new folder, select Options > Rename.

To rearrange the folder, scroll to the application you

want to move, and select Options > Move. A check

mark is placed beside the application. Scroll to a new

location, and select OK.

To move an application to a different folder, scroll to

the application you want to move, and select

Options > Move to folder, the new folder, and OK.

To download applications from the web, select

Options > Download applications.

Transfer

Select Menu > Tools > Switch.

You can transfer content, such as contacts, from a

compatible Nokia device to your new Eseries device

using Bluetooth connectivity or infrared. The type of

content that can be transferred depends on the device

model. If the other device supports synchronisation,

you can also synchronise data between the two devices

or send data from this device to the other device.

When you transfer data from your previous device, it

may require you to insert the SIM card. Your new Eseries

device does not need a SIM card when transferring

data.

Content is copied from the memory of the other device

to the corresponding location in your device. Copying

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

time depends on the amount of data to be transferred.

You can also cancel and continue later.

The necessary steps for data transfer may vary

depending on your device, and whether you have

interrupted data transfer earlier. The items that you

can transfer vary depending on the other device.

Transfer content between

devices

To connect the two devices, follow the instructions on

the display. For some device models, the Transfer

application is sent to the other device as a message. To

install Transfer on the other device, open the message,

and follow the instructions on the display. On your new

Eseries device, select the content you want to copy

from the other device.

After the data transfer, you can save the shortcut with

the transfer settings to the main view to repeat the

same transfer later. To edit the shortcut, select

Options > Shortcut settings.

Display indicators

The device is being used in a UMTS network

(network service).

The battery charge level. The higher the bar,

the stronger the charge in the battery.

You have one or more unread messages in the

Inbox folder in Messaging.

You have received new e-mail in the remote

mailbox.

There are messages waiting to be sent in the

Outbox folder in Messaging.

You have one or more missed phone calls.

The keys of the device are locked.

An alarm is active.

You have selected the Silent profile, and the

device does not ring for an incoming call or

message.

Bluetooth is active.

Data is being transmitted using Bluetooth

connectivity. When the indicator is blinking,

your device is trying to connect with another

device.

An infrared connection is active. If the indicator

blinks, your device is trying to connect to the

other device, or the connection has been lost.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

A GPRS packet data connection is available

(network service). If the icon is , the

connection is active. If the icon is , the

connection is on hold.

An EGPRS packet data connection is available

(network service). If the icon is , the

connection is active. If the icon is , the

connection is on hold.

A UMTS packet data connection is available

(network service). If the icon is , the

connection is active. If the icon is , the

connection is on hold.

High-speed downlink packet access (HSDPA) is

supported and available (network service). The

icon may vary between regions. If the icon is

, the connection is active. If the icon is , the

connection is on hold.

You have set the device to scan for WLANs, and

a WLAN is available.

A WLAN connection is active in a network that

does not have encryption.

A WLAN connection is active in a network that

has encryption.

Your device is connected to a computer with a

USB data cable.

The second phone line is being used (network

service).

All calls are forwarded to another number. If

you have two phone lines, a number indicates

the active line.

A headset is connected to the device.

The connection to a headset with Bluetooth

connectivity has been lost.

A hands-free car kit is connected to the device.

A loopset is connected to the device.

A text phone is connected to the device.

Your device is synchronising.

You have an ongoing push-to-talk connection.

Your push-to-talk connection is in the do not

disturb mode, because the ringing type setting

of your device is set to Beep once or Silent, or

you have an incoming or ongoing phone call.

In this mode, you cannot make PTT calls.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Common actions in

several applications

You can find the following actions in several

applications:

To change the profile, or switch off or lock the device,

press the power key briefly.

If an application consists of

several tabs (see figure),

open a tab by scrolling right

or left.

To save the settings that you

have configured in an

application, select Back.

To save a file, select

Options > Save. There are

different saving options

depending on the

application you use.

To send a file, select

Options > Send. You can send a file in an e-mail or

multimedia message, or using Bluetooth connectivity

or infrared.

To copy, press and hold the shift key, and select the text

with the scroll key. Press and hold the shift key, and

select Copy. To paste, scroll to where you want to paste

the text, press and hold the shift key, and select

Paste. This method may not work in applications that

have their own copy and paste commands.

To select different items, such as messages, files, or

contacts, scroll to the item you want to select. Select

Options > Mark/Unmark > Mark to select one item

or Options > Mark/Unmark > Mark all to select all

items.

Tip: To select almost all items, first select

Options > Mark/Unmark > Mark all, then

select the items you do not want, and Options >

Mark/Unmark > Unmark.

To select an object (for example, an attachment in a

document) scroll to the object so that square markers

appear on each side of the object.

Lock the keys

When the device or keypad is locked, calls may be

possible to the official emergency number

programmed into your device.

The keypad of your device locks automatically to

prevent the keys from being accidentally pressed. To

change the period after which the keypad is locked,

select Menu > Tools > Settings > General >

Security > Phone and SIM card > Keypad autolock

period.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To lock the keys manually

in the home screen, press

the left selection key and

the function key.

To lock the keys manually

in the menu or in an open

application, press the

power key briefly, and

select Lock keypad.

To unlock the keys, press

the left selection key and

the function key.

Volume control

To adjust the earpiece volume during a phone call or

the volume of the media applications, use the volume

keys.

Memory

There are two types of memory into which you can save

data or install applications: device memory and

memory card.

Free memory

To see how much memory is currently in use, how

much free memory remains, and how much memory is

consumed by each data type, select Menu >

Options > Memory details > Phone memory or

Memory card.

Tip: To ensure that you have adequate memory,

transfer data regularly to a memory card or

computer, or use File manager to delete files you

no longer need.

After you install applications to a compatible memory

card, installation files (.sis, .sisx) remain in the device

memory. The files may use large amounts of memory

and prevent you from storing other files. To maintain

sufficient memory, use Nokia PC Suite to back up

installation files to a compatible PC, then use the file

manager to remove the installation files from the

device memory. If the .sis file is a message attachment,

delete the message from the Messaging inbox.

Memory card

Select Menu > Tools > Memory.

If you cannot use a memory card in your device, you

may have the wrong type of memory card, the card may

not be formatted for your device, or the card has a

corrupted file system. Your Nokia device supports the

FAT16 and FAT32 file system for memory cards.

MicroSDHC

This device uses microSD and microSDHC

memory cards.

To ensure interoperability, use only

compatible memory cards with this device. Check the

compatibility of a memory card with its manufacturer

or provider. Other memory cards than microSD and

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

microSDHC cards are not compatible with this device.

Using an incompatible memory card may damage the

memory card as well as the device, and data stored on

the incompatible card may be corrupted.

Use a memory card

To format a memory card for your device, select

Options > Format memory card. When a memory

card is formatted, all data on the card is lost

permanently. Consult your retailer to find out if you

must format the memory card before you can use it.

To change the name of the memory card, select

Options > Memory card name.

You can protect a memory card with a password to

prevent unauthorised access. To set a password, select

Options > Set password. The password can be up to

eight characters long and is case-sensitive. The

password is stored in your device. You do not need to

enter it again while you use the memory card in the

same device. If you use the memory card in another

device, you are asked for the password. Not all memory

cards support password protection.

To remove the memory card password, select

Options > Remove password. When you remove the

password, the data on the memory card is not

protected against unauthorised use.

To open a locked memory card, select Options >

Unlock memory card. Enter the password.

Write text

The input methods provided in the device may vary

according to different sales markets.

Traditional text input

Your device has a full keyboard. You can enter

punctuation marks by pressing the corresponding key

or a combination of keys.

To switch between the different character cases, press

the shift key. On the display, , , and

indicate the selected character case.

To insert digits or characters printed at the top of keys,

press and hold the corresponding key, or press and

hold the function key and press the corresponding key.

To enter only the characters printed at the top of keys,

press the function key twice quickly.

To erase a character, press the backspace key. To erase

several characters, press and hold the backspace key.

To insert characters that are not shown on the keypad,

press the chr key.

To copy text, press and hold the shift key, and scroll to

highlight the word, phrase, or line of text you want to

copy. Press the function key + chr + c. To insert the text

into a document, move to the correct place and press

the function key + chr + v.

To change the writing language, or to switch off the

predictive text input, press the function key + spacebar,

and select from the available options. 21

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Predictive text input

To activate predictive text input, press the function key

+ spacebar and select Predictive input > On. The

indicator is shown on the display. When you

start writing a word, your device suggests possible

words. When the correct word is found, scroll right to

confirm it. While writing, you can also scroll down to

access a list of suggested words. If the desired word is

on the list, scroll to it and press the scroll key. If the

word you are writing is not in the dictionary of the

device, the device suggests a possible word, while the

word you were writing is shown above the suggested

word. Scroll up to select your word. The word is added

to the dictionary when you start writing the next word.

To switch predictive text input off, press the function

key + spacebar and select Predictive input > Off.

To define the settings for text input, select Options >

Input options > Settings.

To change the writing language, select Options >

Input options > Input language.

Further information

Extended user guide

An extended version of this user guide is available on

the Nokia web site. Some applications or functions are

explained only in the extended user guide.

Instructions in your device

To read instructions for the current view of the open

application, select Options > Help.

To browse the help topics and conduct searches, select

Menu > Help > Help. You can select categories for

which you want to see instructions. Select a category,

such as Messaging, to see what instructions (help

topics) are available. While you are reading the topic,

scroll left or right to see the other topics in that

category.

To switch between the application and help, press and

hold the home key.

Tutorial

The tutorial provides you information about your

device and shows you how to use it. Select Menu >

Help > Tutorial.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

New from Eseries

Your new Eseries device contains new versions of the

Calendar and Contacts applications, as well as a new

home screen.

Access tasks quickly

Whenever you see

the icon on the

home screen, or

in the Contacts or

Calendar

applications,

scroll right to

access a list of

available actions.

To close the list,

scroll left.

When you navigate in these applications, to go back to

the previous level, scroll left.

Home screen

From the home screen you can quickly access features

that you use the most, and see at a glance any missed

calls or new messages.

Navigate in the home screen

To access the home screen, press the home key briefly.

The home screen consists of:

•application shortcuts (1)

To access an application

quickly, scroll to its

shortcut and press the

scroll key.

•information area (2) To

check an item displayed

in the information area,

scroll to the item and

press the scroll key.

•notifications (3) To view

the notifications, scroll to

a box. Each box is only visible if there are items in it.

To hide the boxes, press the backspace key.

To define what kind of items and shortcuts you want

to see on the home screen, and to set the appearance

of the home screen, select Menu > Tools > Modes.

Work on the home screen

To search for contacts in the home screen, start

entering the contact's name. The device suggests 23

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

matching contacts. Scroll to the desired contact. This

feature may not be available in all languages.

To call the contact, press the call key.

To set off the contact search, select Options > Contact

search off.

To check your received messages, scroll to the message

box in the notification area. To read a message, scroll

to it and press the scroll key. To access other tasks,

scroll right.

To view your missed calls, scroll to the calls box in the

notification area. To return a call, scroll to a call and

press the call key. To send a text message to a caller,

scroll to a call, scroll right and select Send text msg.

from the list of available actions.

To listen to your voice mail, scroll to the voice mail box

in the notification area. Scroll to the desired voice

mailbox and press the call key to call it.

Switch home screens

You can define two home screen modes for different

purposes, such as one mode to show your business e-

mail and notifications, and another to show your

personal e-mail. This way, you do not have to see

business-related messages outside office hours.

Your operator may have set you a third home screen

with operator-specific items.

To change from one home screen mode to another,

scroll to and press the scroll key.

One-touch keys

With the One-touch keys you can access applications

and tasks quickly. Each key has been assigned an

application and a task. To change these, select Menu >

Tools > Settings > General > Personalisation >

One-touch keys. Your network operator may have

assigned applications to the keys, in which case you

cannot change them.

Home key

To access the home screen, press the home key briefly.

Press the home key briefly again to access the menu.

To view the list of active applications, press the home

key for a few seconds. When the list is open, press the

home key briefly to scroll the list. To open the selected

application, press the home key for a few seconds, or

press the scroll key. To close the selected application,

press the backspace key.

Leaving applications running in the background

increases the demand on battery power and reduces

the battery life.

Contacts key

To open the Contacts application, press the contacts

key briefly.

To create a new contact, press the contacts key for a

few seconds.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Calendar key

To open the Calendar application, press the calendar

key briefly.

To create a new meeting entry, press the calendar key

for a few seconds.

E-mail key

To open your default mailbox, press the e-mail key

briefly.

To create a new e-mail message, press the e-mail key

for a few seconds.

Nokia Calendar for

Eseries

Select Menu > Office > Calendar.

Create and view scheduled events and appointments,

and switch between different calendar views.

Calendar views

You can switch between the following views:

•Month view shows the current month and the

calendar entries of the selected day in a list.

•Week view shows the events for the selected week

in seven day boxes.

•Day view shows the events for the selected day

grouped into time slots according to their starting

time.

•To-do view shows all to-do items.

•Agenda view shows the events for the selected day

in a list.

To change the view, select Options > Change view

and the desired view.

Tip: To open the week view, scroll to a week

number and press the scroll key.

To move to the next or the previous day in month,

week, day, and agenda views, scroll right or left.

To change the default view, select Options >

Settings > Default view.

View calendar information

In the month view, calendar

entries are marked with a

triangle. Anniversary entries

are also marked with an

exclamation mark. The

entries of the selected day

are shown in a list.

To open calendar entries,

open a calendar view, scroll

to an entry, and press the

scroll key.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Create calendar entries

You can create the following types of calendar entries:

•Meeting entries remind you of events that have a

specific date and time.

•Memo entries are related to the whole day but not

to a specific time of the day.

•Anniversary entries remind you of birthdays and

special dates. They refer to a certain day but not a

specific time of the day. Anniversary entries are

repeated every year.

•To-do entries remind you of a task that has a due

date but not a specific time of the day.

To create a calendar entry, scroll to a date, select

Options > New entry and the entry type.

Tip: To create a meeting entry, start entering the

subject.

Create meeting, memo, anniversary, or to-do

entries

1. Enter the subject.

2. For meeting entries, enter the start and end times,

or select All-day event.

3. For meeting and memo entries, enter the start and

end dates. For anniversary entries, enter the date

and for to-do entries, enter the due date.

4. For meeting entries, enter the location.

5. For meeting, anniversary, and to-do entries, you

can set an alarm.

6. For recurring meeting entries, set the recurrence

time.

7. For to-do entries, set the priority. To set the priority

for meeting entries, select Options > Priority.

8. For memo, anniversary, and to-do entries, define

how the entry is handled during synchronisation.

Select Private to hide the entry from viewers if the

calendar is available online, Public to make the

entry visible to viewers, or None to not copy the

entry to your computer.

9. Enter a description.

To send the entry, select Options > Send.

Calendar settings

Select Options > Settings.

To change the alarm tone, select Calendar alarm

tone.

To change the view displayed when you open the

calendar, select Default view.

To change the first day of the week, select Week starts

on.

To change the week view title, select Week view

title and Week number or Week dates.

Nokia Contacts for

Eseries

Select Menu > Communic. > Contacts.

Save and update contact information, such as phone

numbers, home addresses, or e-mail addresses of your

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

contacts. You can add a personal ringing tone or a

thumbnail image to a contact. You can also create

contact groups, which allow you to communicate with

several contacts at the same time, and send contact

information (business cards) to or receive it from

compatible devices.

Whenever you see the icon, scroll right to access a

list of available actions. To close the list, scroll left.

Add contacts

Select Options > New contact, and enter the

contact's information.

To copy a contact's information from the memory card,

select Options > Copy > From memory card.

Contact groups

Select each contact you want to add to the contact

group, select Options > Mark/Unmark > Mark to

mark it, select Options > Group > Add to group >

Create new group > Group name, and enter a name

for the group.

If you want to make conference calls to the group,

define also the following:

•Conf. service number — Enter the conference call

service number.

•Conf. service ID — Enter the conference call ID

number.

•Conf. service PIN — Enter the conference call PIN

code number.

To make a conference call to the group, select the

group, scroll right, and select Call conf. service from

the list of available actions.

Search for contacts

To search for contacts, start entering the contact's

name in the search field.

Manage contacts directories

You can install contacts directories from the Download!

application.

To change the contacts directory, scroll to the top of

the names list, press the scroll key, and select from the

list of available directories.

To organise contacts directories, select Options >

Organise contact lists and a directory. Scroll up to

move it to the desired place.

Add ringing tones for

contacts

You can set a ringing tone for a contact or contact

group. The ringing tone sounds when the contact calls

you.

To add a ringing tone for contacts, open a contact,

select Options > Ringing tone and a ringing tone.

To add a ringing tone for contact groups, select a

contact group, Options > Group > Ringing tone and

a ringing tone. 27

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To remove the assigned ringing tone, select Default

tone from the list of ringing tones.

Change contacts settings

Select Options > Settings.

To change the way the contacts' names are displayed,

select Name display.

To select which contacts directory opens when you

open the Calendar application, select Default contact

list.

Multitasking

You can have several applications open at the same

time. To switch between active applications, press and

hold the home key, scroll to an application, and press

the scroll key. To close the selected application, press

the backspace key.

Example: When you have an active phone call

and want to check your calendar, press the home

key to access the menu, and open the Calendar

application. The phone call remains active in the

background.

Example: When you are writing a message and

want to check a web site, press the home key to

access the menu, and open the Web application.

Select a bookmark or enter the web address

manually, and select Go to. To return to your

message, press and hold the home key, scroll to

the message and press the scroll key.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Phone

To make and receive calls, the device must be switched

on, the device must have a valid SIM card installed, and

you must be located in the service area of a cellular

network.

To make or receive a net call, your device must be

connected to a net call service. To connect to a net call

service, your device must be in the coverage of a

connection network, such as a WLAN access point.

Voice calls

Note: The actual invoice for calls and services from

your service provider may vary, depending on network

features, rounding off for billing, taxes, and so forth.

Answer a call

To answer a call, press the call key.

To reject a call, press the end key.

To mute the ringing tone instead of answering a call,

select Silence.

When you have an active call and the call waiting

function (network service) is activated, press the call

key to answer a new incoming call. The first call is put

on hold. To end the active call, press the end key.

Make a call

Important: If the device has been locked, enter the

lock code to activate the phone function. When the

device is locked, calls may be possible to the official

emergency number. Making an emergency call in the

offline profile or when the device is locked requires

that the device recognise the number to be an official

emergency number. It is advisable to change the

profile or unlock the device by entering the lock code

before you make the emergency call.

To make a call, enter the phone number, including the

area code, and press the call key.

Tip: For international calls, add the + character

that replaces the international access code, and

enter the country code, area code (omit the

leading 0, if necessary), and phone number.

To end the call or cancel the call attempt, press the end

key.

To make a call using the saved contacts, press the

contacts key. Enter the first letters of the name, scroll 29

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

to the name, and press the call key. See "Nokia Contacts

for Eseries", p. 26.

To make a call using the log, press the call key to view

up to 20 numbers that you last called or attempted to

call. Scroll to the desired number or name, and press

the call key. See "Log", p. 35.

To adjust the volume of an active call, use the volume

keys.

To switch from a voice call to a video call, select

Options > Switch to video call. The device ends the

voice call and makes a video call to the recipient.

Make a conference call

1. To make a conference call, enter a participant's

phone number, and press the call key.

2. When the participant answers, select Options >

New call.

3. When you have made a phone call to all the

participants, select Options > Conference to

merge the calls into a conference call.

To mute the microphone of your device during the call,

select Options > Mute.

To drop a participant from the conference call, scroll to

the participant, and select Options > Conference >

Drop participant.

To discuss privately with a conference call participant,

scroll to the participant, and select Options >

Conference > Private.

Video calls

To be able to make a video call, you need to be in the

coverage of a UMTS network. For availability of and

subscription to video call services, contact your

network operator or service provider. While talking,

you can see a real-time, two-way video between you

and the recipient of the call, if the recipient has a

compatible mobile phone. The video image captured

by the camera in your device is shown to the video call

recipient. A video call can only be made between two

parties.

Make a video call

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume

may be extremely loud.

To make a video call, enter the phone number or select

the recipient of the call from Contacts, and select

Options > Call > Video call. When the video call

starts, the camera of the device is activated. If the

camera is already in use, video sending is disabled. If

the recipient of the call does not want to send a video

back to you, a still image is shown instead. You can

define the still image in Menu > Tools > Settings >

Phone > Call > Image in video call.

To disable the sending of audio, video, or video and

audio, select Options > Disable > Sending audio,

Sending video, or Sending aud. & video.

To use the loudspeaker for receiving audio, select

Options > Activate loudspeaker. To mute the

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

loudspeaker and use the earpiece, select Options >

Activate handset.

To swap the places of images, select Options >

Change image order.

To zoom the image on the display, select Options >

Zoom in or Zoom out.

To end the video call and make a new voice call to the

same recipient, select Options > Switch to voice

call.

Share a video

Use Video sharing (network service) to send live video

or a video clip from your mobile device to another

compatible mobile device during a voice call. To use

this feature, the device must be within the coverage of

a UMTS network.

1. Make a phone call to the selected recipient. You can

start sharing a video once the phone call is

established and your device has been registered to

the SIP server.

2. To send live video or a video clip from your device,

select Options > Share video > Live or Clip. To

preview the clip, select Options > Play.

3. Select the recipient from Contacts, or enter the

recipient's SIP address manually to send an

invitation to the recipient. Sharing begins

automatically when the recipient accepts the video

sharing.

4. To end sharing the video, select Stop. The voice call

continues normally.

Receive a video sharing

invitation

When you receive a video sharing invitation, a message

is displayed showing the caller's name or SIP address.

To accept the invitation and begin the sharing session,

select Accept.

To reject the invitation, select Reject. The voice call

continues normally.

Net calls

Select Menu > Communic. > Internet tel..

Your device supports voice calls over the internet (net

calls). Your device attempts emergency calls primarily

over cellular networks. If an emergency call using

cellular networks is not successful, your device

attempts an emergency call through your net call

provider. Due to the established nature of cellular

telephony, you should use cellular networks for

emergency calls, if possible. If you have cellular

network coverage available, make sure that your

cellular phone is switched on and ready to make calls

before you attempt an emergency call. The capability

for an emergency call using internet telephony

depends on the availability of a WLAN and your net call

provider's implementation of emergency call

capabilities. Contact your net call provider to check the

internet telephony emergency call capability.

With the net call service (network service), you can

make and receive calls over the internet using the VoIP

(voice over internet protocol) technology. Net calls can

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

be established between computers, between mobile

phones, and between a VoIP device and a traditional

telephone. To make or receive a net call, your device

must be within WLAN coverage, for example. The

availability of the net call service may vary according

to your country or area.

Create a net call profile

Before you can make net calls, you need to create a net

call profile.

1. Select Menu > Tools > Settings >

Connection > SIP settings > Options > New

SIP profile, and enter the required information. To

make the login to the net call service automatic,

select Registration > Always on. Contact your net

call provider for the correct settings.

2. Select Back until you return to the Connection

settings main view.

3. Select Internet tel. > Options > New profile.

Enter a name for the profile, and select the SIP

profile you just created.

To set the created profile to be used automatically

when connecting to the net call service, select Menu >

Communic. > Internet tel. > Preferred profile.

To login to the net call service manually, select

Registration > When needed in the SIP settings

when creating a net call profile.

To make secure net calls, ask your service provider for

secure net call settings. The proxy server selected for

the net call profile must support secure net calls. A

secure net call is indicated with .

Connect to the net call

service

Select Menu > Communic. > Internet tel..

To make or receive a net call, your device must be

connected to a net call service. If you have selected

automatic login, your device automatically connects to

the net call service. If you login to the service manually,

select an available network from the list and Select.

The list of networks is refreshed automatically every 15

seconds. To refresh the list manually, select Options >

Refresh. Use this option if your WLAN is not shown on

the list.

To select a net call service for outgoing calls if the

device is connected to more than one service, select

Options > Change service.

To configure new services, select Options >

Configure service. This option is shown only if there

are services that have not been configured.

To save the network to which you are currently

connected, select Options > Save network. The

saved networks are marked with a star on the list of

networks.

To connect to a net call service using a hidden WLAN,

select Options > Use hidden network.

To end the connection to a net call service, select

Options > Disconnect from service.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Make net calls

You can make a net call from all applications where you

can make a regular voice call. For example in Contacts,

scroll to the desired contact, and select Call > Internet

call.

To make a net call in the home screen, enter the SIP

address, and press the call key.

To set net call as the preferred call type for outgoing

calls, select Menu > Communic. > Internet tel. >

Options > Settings > Default call type > Internet

call. When your device is connected to a net call service,

all calls are made as net calls.

Speed dialling

Select Menu > Tools > Settings > Phone > Call >

Speed dialling > On.

Speed dialling allows you to make a call by pressing

and holding a number key when in the home screen.

To assign a number key to a phone number, select

Menu > Communic. > Speed dial. Scroll to the

number key (2 - 9) on the display, and select Options >

Assign. Select the desired number from Contacts.

To delete the phone number assigned to a number key,

scroll to the speed dialling key, and select Options >

Remove.

To modify a phone number assigned to a number key,

scroll to the speed dialling key, and select Options >

Change.

Voice mail

Select Menu > Communic. > Call mailbox.

When you open the Voice mail application for the first

time, you are asked to enter the number of your voice

mailbox.

To call your voice mail, select Options > Call voice

mailbox.

If you have configured net call settings to your device

and have an internet call mailbox, select Internet call

mailbox > Options > {No display_text mapping

for 'qtn_voip_call_mailbox.vm', locale='en'} to call

it.

To call your voice mail when in the home screen, press

and hold 1; or press 1 and then the call key. If you have

defined an internet call mailbox, select whether you

want to call your voice mail or internet call mailbox.

To change the voice mailbox number, select the

mailbox and Options > Change number.

To change the internet call mailbox address, select the

mailbox and Options > Change address.

Voice aid

Select Menu > Tools > Voice aid.

The Voice aid application reads text on the display,

allowing you to use the basic functions of your device

without looking at the display.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To hear the entries in your contacts list, select

Contacts. Do not use this option if you have more than

500 contacts.

To hear information on your missed and received calls,

dialled numbers, and frequent calls, select Recent

calls.

To listen to your voice messages, select Voice

mailbox.

To dial a telephone number, select Dialler.

To use voice commands to make a phone call, select

Voice commands.

To have your received messages read aloud, select

Message reader.

To hear the current time, select Clock > Time. To hear

the current date, select Clock > Date.

If the Voice aid application is open when a calendar

alarm is due, the application reads the calendar alarm

content aloud.

To hear more options, select Options.

Voice commands

Select Menu > Tools > Voice comm..

Use voice commands to make phone calls and launch

applications, profiles, or other functions on the device.

The device creates a voice tag for the entries in Contacts

and for the functions designated in the Voice

commands application. When a voice command is

spoken, the device compares the spoken words to the

voice tag in the device. Voice commands are not

dependent on a speaker’s voice; however, the voice

recognition in the device adapts to the main user’s

voice to recognise voice commands better.

Make a call

A voice tag for a contact is the name or nickname that

is saved on the contact in Contacts.

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should

not rely solely upon voice dialing in all circumstances.

To listen to a voice tag, open a contact, and select

Options > Play voice tag.

1. To make a call using a voice command, press and

hold the voice key.

2. When you hear the tone or see the visual display,

clearly speak the name saved on the contact.

3. The device plays a synthesised voice tag for the

recognised contact in the selected device language,

and displays the name and number. After a timeout

of 1.5 seconds, the device dials the number. If the

recognised contact was not correct, select Next to

view a list of other matches or Quit to cancel

dialling.

If several numbers are saved under the contact, the

device selects the default number, if it has been set.

Otherwise, the device selects the first available

number of the following fields: Mobile, Mobile

(home), Mobile (business), Telephone, Tel.

(home), and Tel. (business).

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Push to talk

Select Menu > Communic. > PTT.

Push to talk (PTT) (network service) provides direct

voice communication connected with the push of a key.

With PTT, you can use your device as a walkie-talkie:

one person talks while the others listen through the

built-in loudspeaker. Users take turns responding to

each other. Because only one user can talk at a time,

the maximum duration of a speech turn is limited. For

details of the speech turn duration, contact your

service provider.

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume

may be extremely loud.

Log

Select Menu > Log.

Log stores information about the communication

history of the device. The device registers missed and

received calls only if the network supports these

functions, the device is switched on and within the

network service area.

Call and data registers

To view recently missed, received, and dialled calls,

select Recent calls.

Tip: To open Dialled numbers when in the

home screen, press the call key.

To view the approximate duration of calls to and from

your device, select Call duration.

To view the amount of data transferred during packet

data connections, select Packet data.

Monitor all communications

To monitor all voice calls, text messages, or data

connections registered by the device, open the general

log tab.

To view detailed information about a communication

event, scroll to it, and press the scroll key.

Tip: Subevents, such as a text message sent in

more than one part and packet data

connections, are logged as one communication

event. Connections to your mailbox, multimedia

messaging centre, or web pages are shown as

packet data connections.

To add the phone number from a communication event

to Contacts, select Options > Save to Contacts, and

select to create a new contact or to add the phone

number to an existing contact.

To copy the number, for example to paste it to a text

message, select Options > Copy number.

To view a single type of communication event or

communication events with one other party, select

Options > Filter, and select the desired filter.

To erase the contents of the log, recent calls register,

and messaging delivery reports permanently, select

Options > Clear log.35

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Messaging

Select Menu > Communic. > Messaging.

In Messaging (network service), you can send and

receive text messages, multimedia messages, audio

messages, and e-mail messages. You can also receive

web service messages, cell broadcast messages, and

special messages containing data, and send service

commands.

Before sending or receiving messages, you may need

to do the following:

•Insert a valid SIM card in the device and be located

in the service area of a cellular network.

•Verify that the network supports the messaging

features you want to use and that they are activated

on your SIM card.

•Define the internet access point settings on the

device. See "Internet access points", p. 47.

•Define the e-mail account settings on the device. See

"E-mail account settings", p. 43.

•Define the text message settings on the device. See

"Text message settings", p. 41.

•Define the multimedia message settings on the

device. See "Multimedia message

settings", p. 42.

The device may recognise the SIM card provider and

automatically configure some of the message settings.

If not, you may need to define the settings manually;

or contact your service provider to configure the

settings.

Messaging folders

Messages and data received using Bluetooth

connectivity or infrared are stored in the Inbox folder.

E-mail messages are stored in Mailbox. Messages that

you have been writing can be stored in the Drafts

folder. Messages that are waiting to be sent are stored

in the Outbox folder, and messages that have been

sent, excluding Bluetooth and infrared messages, are

stored in the Sent folder.

Tip: Messages are placed in Outbox, for example,

when your device is outside network coverage.

You can also schedule e-mail messages to be

sent the next time you connect to your remote

mailbox.

Note: The message sent icon or text on your device

screen does not indicate that the message is received

at the intended destination.

To request the network to send you a delivery report

of the text messages and multimedia messages you

have sent (network service), select Options >

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Settings > Text message or Multimedia

message > Receive report. The reports are saved in

the Reports folder.

E-mail messages

Select Menu > Messaging > Mailbox.

To receive and send e-mail, you must have a remote

mailbox service. This service may be offered by an

internet service provider, a network service provider,

or your company. Your device is compliant with

internet standards SMTP, IMAP4 (revision 1), and POP3,

and with different vendor-specific e-mail solutions.

Other e-mail providers may offer services with different

settings or features than those described in this user

guide. Contact your e-mail provider or service provider

for more details.

Before you can send, receive, retrieve, reply to, and

forward e-mail on your device, you must also do the

following:

•Configure an internet access point. See "Internet

access points", p. 47.

•Set up an e-mail account, and define the e-mail

settings correctly. To do this, use the mailbox guide,

or define the account manually. See "E-mail account

settings", p. 43.

Contact your service provider for the correct settings.

Set up your e-mail with the

mailbox guide

If you select Menu > Messaging > Mailbox, and have

not set up your e-mail account, you are prompted to

do so. To start setting up the e-mail account with the

mailbox guide, select Yes.

1. To start entering the e-mail settings, select Start.

2. In Mailbox type, select IMAP4 or POP3, and select

Next.

Tip: POP3 is a version of the post office

protocol that is used to store and retrieve e-

mail or internet mail messages from a server.

IMAP4 is a version of the internet message

access protocol that lets you access and

manage e-mail messages while the

messages are still on the e-mail server. You

can then choose which messages to

download to your device.

3. In My e-mail address, enter your e-mail address.

Select Next.

4. In Incoming mail server, enter the name of the

remote server that receives your e-mail, and select

Next.

5. In Outgoing mail server, enter the name of the

remote server that sends your e-mail, and select

Next. Depending on your mobile operator, you

might have to use your mobile operator's outgoing

mail server instead of your e-mail provider's.

6. In Access point, select the internet access point

your device should use when it retrieves the e-mail.

If you select Always ask, each time the device starts

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

to retrieve e-mail, it asks which internet access

point it should use. Select Next.

7. Enter a name for your new mailbox, and select

Finish.

When you create a new mailbox, the name you give to

the mailbox replaces Mailbox in the Messaging main

view. You can have up to six mailboxes.

If you have defined several mailboxes, select one of

them as your default mailbox. That mailbox is used

every time you start composing a new e-mail message.

To define the default mailbox, select Options >

Settings > E-mail > Default mailbox and the

mailbox.

Connect to a remote mailbox

E-mail addressed to you is not automatically received

by your device, but by your remote mailbox. To read

your e-mail, you must first connect to the remote

mailbox; then select the e-mail messages you wish to

retrieve into your device.

1. To retrieve received e-mail messages to your device

and view them, select your mailbox in the

Messaging main view. When the device asks

Connect to mailbox?, select Yes.

2. Enter your user name and password, if prompted.

3. Select Options > Retrieve e-mail > New to

retrieve new messages that you have neither read

nor retrieved, Selected to retrieve only messages

you select from the remote mailbox, or All to

retrieve all messages not previously retrieved.

4. To manage your e-mail offline to save in connection

costs and work in conditions that do not allow a

data connection, select Options > Disconnect to

disconnect from the remote mailbox. Any changes

you make in the remote mailbox folders while

offline, take effect in your remote mailbox the next

time you go online and synchronise.

Read and reply to e-mail

Important: Exercise caution when opening

messages. Messages may contain malicious software

or otherwise be harmful to your device or PC.

To read a received e-mail, open it from the mailbox.

To open an attachment, select Options >

Attachments. Scroll to the attachment, and press the

scroll key.

To reply only to the sender of an e-mail, select

Options > Reply > To sender.

To reply to all recipients of an e-mail, select Options >

Reply > To all.

Tip: If you reply to an e-mail that contains

attached files, the attachments are not included

in the reply. If you forward the received e-mail,

the attachments are included.

To forward an e-mail, select Options > Forward.

To attach a file to an e-mail message, select Options >

Insert and the attachment you want to add.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To delete an attachment from an e-mail that you are

sending, select the attachment and Options >

Remove.

To set the message priority, select Options > Sending

options > Priority.

To set the sending time for the e-mail message, select

Options > Sending options > Send message.

Select Immediately, or select When conn. avail. if

you are working offline.

To call the sender of the e-mail message, if the sender

can be found in Contacts, select Options > Call.

To reply to the sender of the e-mail with an audio

message or multimedia message, select Options >

Create message.

Write and send e-mail

1. To write an e-mail, select New message > E-

mail.

2. Select Options > Add recipient to select the

recipients' e-mail addresses from Contacts, or enter

the e-mail addresses in the To field. Use a semicolon

to separate entries. Use the Cc field to send a copy

to other recipients, or the Bcc field to send a blind

copy to recipients.

3. In the Subject field, enter the subject of the e-mail.

4. Enter your e-mail message in the text area, and

select Options > Send.

Delete messages

To free up memory space on your device, regularly

delete messages from the Inbox and Sent folders, and

delete retrieved e-mail messages.

To delete e-mail from the device only, and keep the

original on the server, select Options > Delete >

Phone (header remains).

To delete e-mail both from the device and the remote

server, select Options > Delete > Phone and

server.

To cancel the deleting, select Options > Restore.

Subfolders in your remote e-

mail

If you create subfolders in your IMAP4 mailboxes on a

remote server, you can view and manage these folders

with your device when you subscribe to them. You can

only subscribe to folders in your IMAP4 mailboxes.

To view folders in your IMAP4 mailbox, establish a

connection, and select Options > E-mail settings >

Retrieval settings > Folder subscriptions.

To view a remote folder, select a folder and Options >

Subscribe. Every time you go online, the subscribed

folders are updated. This may take some time if the

folders are large.

To update the list of folders, select a folder and

Options > Update folder list.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Write and send text

messages

Select Menu > Communic. > Messaging.

Your device supports text messages beyond the limit

for a single message. Longer messages are sent as two

or more messages. Your service provider may charge

accordingly. Characters with accents or other marks,

and characters from some language options, take up

more space, and limit the number of characters that

can be sent in a single message.

1. To write a text message, select New message >

Text message.

2. In the To field, enter a recipient's number, or press

the scroll key to add a recipient from Contacts. If you

enter more than one number, separate the

numbers with a semicolon.

3. Enter the text of the message. To use a template,

select Options > Insert > Template.

4. Select Options > Send.

Multimedia messages

Select Menu > Communic. > Messaging.

Only devices that have compatible features can receive

and display multimedia messages. The appearance of

a message may vary depending on the receiving device.

A multimedia message (MMS) can contain text and

objects such as images, sound clips, or video clips.

Before you can send or receive multimedia messages

on your device, you must define the multimedia

message settings. Your device may have recognised

the SIM card provider and automatically configured the

multimedia message settings. If not, use Settings

wizard, or contact your service provider for the correct

settings. See "Multimedia message settings", p. 42.

Create and send multimedia

messages

Important: Exercise caution when opening

messages. Messages may contain malicious software

or otherwise be harmful to your device or PC.

1. To create a new message, select New message >

Multimedia message.

2. In the To field, enter a recipient's number or e-mail

address, or press the scroll key to add a recipient

from Contacts. If you enter more than one number

or e-mail address, separate them with a semicolon.

3. In the Subject field, enter a subject for the

message. To change the fields that are visible,

select Options > Address fields.

4. Enter the text of the message, and select Options >

Insert object to add media objects. You can add

objects such as Image, Sound clip, or Video clip.

The wireless network may limit the size of MMS

messages. If the inserted picture exceeds this limit

the device may make it smaller so that it can be sent

by MMS.

5. Each slide of your message can contain only one

video or sound clip. To add more slides to your

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

message, select Options > Insert new > Slide.

To change the order of slides in your message,

select Options > Move.

6. To preview a multimedia message before sending

it, select Options > Preview.

7. Select Options > Send.

To delete an object from a multimedia message, select

Options > Remove.

To set the sending options for the current multimedia

message, select Options > Sending options.

Instant messaging

Select Menu > Communic. > IM.

Instant messaging (IM) (network service) allows you to

converse with other people using instant messages

and join discussion forums (IM groups) with specific

topics. Various service providers maintain IM servers

that you can log in to after you register to an IM service.

Service providers may differ in their support of

features.

If IM is not available from your service provider, it may

not appear in the menu of your device. Contact your

service provider for more information about signing up

for IM services, costs of services, and IM settings. You

may receive the settings in a special text message from

the service provider.

Messaging settings

Select Menu > Communic. > Messaging >

Options > Settings.

Fill in all fields marked with Must be defined or with

a red asterisk.

Your device may recognise the SIM card provider and

configure the correct text message, multimedia

message, and GPRS settings automatically. If not,

contact your service provider for the correct settings,

order the settings from your service provider in a

configuration message, or use the Settings wizard

application.

Text message settings

Select Menu > Communic. > Messaging >

Options > Settings > Text message.

Select from the following:

•Message centres — View the available message

centres for your device, or create a new one.

•Message centre in use — Select a message centre

to send the message.

•Character encoding — Select Reduced support to

use automatic character conversion to another

encoding system when available.

•Receive report — Select Yes if you want the

network to send you delivery reports on your

messages (network service).

•Message validity — Select how long the message

centre resends your message if the first attempt fails

(network service). If the recipient cannot be reached 41

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

within the validity period, the message is deleted

from the message centre.

•Message sent as — Convert the message to another

format, such as Text, Fax, Paging, or E-mail.

Change this option only if you are sure that your

message centre is able to convert text messages into

these other formats. Contact your service provider.

•Preferred connection — Select the preferred

method of connection when sending text messages

from your device.

•Reply via same centre — Select whether you want

the reply message to be sent using the same text

message centre number (network service).

Multimedia message

settings

Select Menu > Communic. > Messaging >

Options > Settings > Multimedia message.

Select from the following:

•Image size — Select Small or Large to scale images

in multimedia messages. Select Original to

maintain the original image size.

•MMS creation mode — Select Restricted to have

your device prevent you from including content in

multimedia messages that may not be supported by

the network or the receiving device. To receive

warnings about including such content, select

Guided. To create a multimedia message with no

restrictions on attachment type, select Free. If you

select Restricted, creating multimedia

presentations is not possible.

•Access point in use — Select the default access

point to connect to the multimedia message centre.

You may not be able to change the default access

point if it is preset in your device by your service

provider.

•Multimedia retrieval — Select Always

automatic to receive multimedia messages always

automatically, Auto in home netw. to receive

notification of a new multimedia message that you

can retrieve from the message centre (for example,

when you are travelling abroad and are outside your

home network), Manual to retrieve multimedia

messages from the message centre manually, or

Off to prevent receipt of any multimedia messages.

•Allow anon. msgs. — Select whether you want to

receive messages from unknown senders.

•Receive adverts — Select whether you want to

receive messages defined as advertisements.

•Receive report — Select Yes to have the status of

the sent message to be shown in the log (network

service). Receiving a delivery report of a multimedia

message that has been sent to an e-mail address

may not be possible.

•Deny report sending — Select Yes to not send

delivery reports from your device for received

multimedia messages.

•Message validity — Select how long the messaging

centre tries to send the message (network service).

If the recipient of a message cannot be reached

within the validity period, the message is removed

from the multimedia messaging centre. Maximum

time is the maximum amount of time allowed by

the network.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

E-mail account settings

Select Menu > Messaging > Options > Settings >

E-mail.

If you try to edit mailbox settings but have not set up

an e-mail account, the mailbox guide opens and helps

you set up your e-mail account.

If you have defined a mailbox, scroll to it, and press the

scroll key to edit the settings.

The settings available for editing may vary. Some

settings may be preset by your service provider.

Connection settings

To define the connection settings, select an e-mail

account and Options > Edit > Connection

settings. To edit the settings for the e-mail you receive,

select Incoming e-mail. To edit the settings for the e-

mail you send, select Outgoing e-mail.

User settings

To define the user settings for an e-mail account, select

the account, select Options > Edit > User settings,

and define the following settings:

•My name — Enter a name to appear before your e-

mail address when you send e-mail.

•Reply-to — Select whether you want replies to be

redirected to a different address. Select On, and

enter the e-mail address to which you want to direct

the replies. You can only enter one address to which

replies are directed.

•Delete e-mails from — Select whether you want to

delete the e-mail messages only from the device or

from both the device and the server. Select Always

ask if you want to confirm from where the e-mail

should be deleted every time you delete an e-mail.

•Send message — Select to send the e-mail

immediately or when a connection is available.

•Send copy to self — Select whether you want to

save a copy of the e-mail to your remote mailbox

and to the address defined in My e-mail address in

the Outgoing e-mail settings.

•Include signature — Select whether you want to

attach a signature to your e-mail messages.

•New e-mail alerts — Select whether you want to

be notified of a new received e-mail message with

a tone and a note.

Retrieval settings

To define the retrieval settings, select the e-mail

account, select Options > Edit > Retrieval

settings, and define the following settings:

•E-mail to retrieve — Select whether you want to

retrieve only the e-mail header information such as

sender, subject and date, e-mail, or e-mail with

attachments. This setting is for POP3 mailboxes

only.

•Retrieval amount — Select the number of e-mail

messages you want to retrieve from the remote

server to your mailbox.

•IMAP4 folder path — Define the folder path for

folders to be subscribed. This setting is for IMAP4

mailboxes only.

•Folder subscriptions — Subscribe to other folders

in the remote mailbox and retrieve content from

those folders. This setting is for IMAP4 mailboxes

only. 43

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Automatic retrieval settings

To define the automatic retrieval settings for an e-mail

account, select the account, select Options > Edit >

Automatic retrieval, and define the following

settings:

•E-mail retrieval — Select Enabled to retrieve new

e-mail messages automatically from your remote

mailbox, or Only in home netw. to retrieve new e-

mail messages automatically from your remote

mailbox only when you are in your home network

and not, for example, travelling.

•Retrieval days — Select the days on which e-mail

is retrieved to your device.

•Retrieval hours — Define the hours between which

the e-mail is retrieved.

•Retrieval interval — Select the interval between

retrieving new e-mail messages.

•E-mail notifications — Select whether you want to

receive notifications on received e-mail.

Other settings

Select Menu > Communic. > Messaging >

Options > Settings > Other.

Select from the following:

•Save sent messages — Select whether to store

sent messages in the Sent folder.

•Number of saved msgs. — Enter the number of

sent messages to save. When the limit is reached,

the oldest message is deleted.

•Memory in use — Select where to save your

messages. You can save messages to the memory

card only if a memory card is inserted.

•Folder view — Define how you want the messages

in Inbox to be shown.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Internet

With your new Eseries device you can browse both the

internet and your company's intranet, and download

and install new applications to your device. You can

also use your device as a modem and connect your PC

to the internet.

Web

Select Menu > Web.

To browse the web (network service), you need to

configure the internet access point settings. If you are

using a GPRS connection, your wireless network must

support GPRS, and the service must be activated for

your SIM card.

Tip: You may receive the internet access point

settings from your service provider as a special

text message or from the service provider's web

pages. You can also enter the internet access

point settings manually. See "Internet access

points", p. 47.

Check the availability of services, pricing, and fees with

your service provider. Service providers also give you

instructions on how to use their services.

Connection security

If the security indicator ( ) is displayed during a

connection, the data transmission between the device

and the internet gateway or server is encrypted. The

security icon does not indicate that the data

transmission between the gateway and the content

server (or place where the requested resource is

stored) is secure. The service provider secures the data

transmission between the gateway and the content

server.

Security certificates may be required for some services,

such as banking services. You are notified if the identity

of the server is not authentic or if you do not have the

correct security certificate in your device. For more

information, contact your service provider.

Browse the web

To browse the web, select a bookmark or enter the web

address manually, and select Go to. Use only services

that you trust and that offer adequate security and

protection against harmful software.

Tip: When you start to enter the address, the

addresses of the pages you have previously

visited that match your input are displayed. To 45

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

open a page, scroll to its address, and press the

scroll key.

To move on a web page, use the scroll key, which is

shown as a pointer on the page. When you move the

pointer over a link, the pointer changes into a hand.

Press the scroll key to open the link. On a web page,

new links usually appear underlined in blue and

previously visited links in purple. Images that act as

links have a blue border around them.

The addresses of the pages you visit are saved in the

Auto. bookmarks folder.

Bookmarks

To view a bookmarked web page, scroll to the

bookmark, and press the scroll key.

To browse to another web page, select Options >

Navigation options > Go to web address, enter the

page address, and select Go to.

To add a bookmark, select Options > Bookmark

manager > Add bookmark.

To organise your bookmarks, select Options >

Bookmark manager in the Web main view. You can

move and edit bookmarks, and create new folders.

Clear the cache

A cache is a memory location that is used to store data

temporarily. If you have tried to access or have

accessed confidential information requiring

passwords, empty the cache after each use. The

information or services you have accessed are stored

in the cache.

To empty the cache, select Options > Clear privacy

data > Clear cache.

End a connection

To end the connection and view the browser page

offline, select Options > Tools > Disconnect. To end

the connection and close the browser, select

Options > Exit.

Web settings

Select Menu > Web > Options > Settings.

The Web settings are divided into four groups:

•General contains access point and home page

related settings.

•Page contains imaging, audio, and pop-up settings.

•Privacy contains settings related your privacy.

•Web feeds contains settings related to web feeds

and blogs.

Browse the intranet

Select Menu > Office > Intranet.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To browse your company's intranet, you must create a

company-specific VPN policy. Select Menu > Tools >

Settings > Connection > VPN.

To connect to the intranet, open the Intranet

application, select the connection method and

Options > Connect.

To define which VPN profile to use in the connection,

select Options > Use other VPN policy.

To define the settings for the intranet connection,

select Options > Settings.

Download!

Select Menu > Download!.

With Download! (network service), you can browse,

download, and install items, such as latest applications

and related documents, to your device from the web.

The items are categorised under catalogs and folders

provided by Nokia or independent service providers.

Some items may be chargeable, but you can usually

preview them free of charge.

Download! uses your network services to access the

most updated content. For information on additional

items available through Download!, contact your

service provider, or the supplier or manufacturer of the

item.

Only install and use applications and other software

from sources that offer adequate security and

protection against harmful software.

Manage items

To open an item or view the content of a folder or

catalogue, scroll to it, and press the scroll key.

To buy the selected item, select Options > Buy.

To download an item that is free of charge, select

Options > Get.

To search for an item, select Options > Search.

To adjust the settings, select Options > Settings.

To view the list of downloaded items, select Options >

My items.

Internet access points

An internet access point is a collection of settings,

which define how the device creates a data connection

to the network. To use e-mail and multimedia services

or to browse web pages, you must first define access

points for these services.

Some or all access points may be preset for your device

by your service provider, and you may not be able to

create, edit, or remove them.

Set up an internet access

point for packet data (GPRS)

1. Select Menu > Tools > Settings >

Connection > Access points.

2. Select Options > New access point to create a

new access point, or select an existing access point

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

from the list and then Options > Duplicate access

point to use the access point as a basis for the new

one.

3. Define the following settings.

•Connection name — Enter a descriptive name

for the connection.

•Data bearer — Select Packet data.

•Access point name — Enter the name for the

access point. The name is usually provided by

your service provider.

•User name — Enter your user name if required

by the service provider. User names are often

case-sensitive and provided by your service

provider.

•Prompt password — Select Yes to enter your

password each time you log into a server or No

to save the password in your device memory and

automate the login.

•Password — Enter your password if required by

the service provider. The password is often case-

sensitive and provided by the service provider.

•Authentication — Select Secure to send your

password always encrypted, or Normal to send

your password encrypted when possible.

•Homepage — Enter the web address of the page

you want to display as the home page when you

use this access point.

4. After defining the settings, select Options >

Advanced settings to define the advanced

settings or Back to save the settings and exit.

Set up an access point for

WLAN manually

1. Select Menu > Tools > Settings >

Connection > Access points.

2. Select Options > New access point to create a

new access point, or select an existing access point

from the list and then Options > Duplicate access

point to use the access point as a basis for the new

one.

3. Define the following settings.

•Connection name — Enter a descriptive name

for the connection.

•Data bearer — Select Wireless LAN.

•WLAN network name — To enter the service

set identifier (SSID), that is, the name that

identifies the specific WLAN, select Enter

manually. To select the network from the

WLANs in range, select Search for networks.

•Network status — Select Hidden if the network

you are connecting to is hidden or Public if it is

not hidden.

•WLAN network mode — If you select

Infrastructure, devices can communicate with

each other and with wired LAN devices through

a WLAN access point. If you select Ad-hoc,

devices can send and receive data directly with

each other, and no WLAN access point is needed.

•WLAN security mode — You must select the

same security mode that is used in the WLAN

access point. If you select WEP (wired equivalent

privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected

access), you must also configure the relevant

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

additional settings. See the device help for more

information.

•WLAN security settings — Edit the security

settings for the selected security mode.

•Homepage — Enter the web address of the page

you want to display as the home page when you

use this access point.

To set up a WLAN access point automatically, use the

WLAN wizard. Select Menu > Connectivity > WLAN

wiz..

Connect PC to web

You can use your device to connect your PC to the web.

1. Connect the data cable to the USB connectors of

your device and your PC.

2. Select Connect PC to Net. The necessary Windows

software is installed to your PC.

3. Accept the installation in your PC. If asked, accept

also the connection. When the connection between

your device and PC is established, the internet

browser of your PC opens.

You must have administrator rights to your PC, and the

autorun option enabled in the PC. If not, run the

setup.exe file from the CD-ROM drive of your PC.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Travelling

Need directions? Looking for a restaurant? Your Eseries

device has the tools to get you where you want to be.

About GPS and

satellite signals

The Global Positioning System (GPS) is a worldwide

radio navigation system that includes 24 satellites and

their ground stations that monitor the operation of the

satellites. Your device has an internal GPS receiver.

A GPS terminal receives low-power radio signals from

the satellites and measures the travel time of the

signals. From the travel time, the GPS receiver can

calculate its location to the accuracy of metres.

The coordinates in the GPS are expressed in degrees

and decimal degrees format using the international

WGS-84 coordinate system.

The Global Positioning System (GPS) is operated by the

government of the United States, which is solely

responsible for its accuracy and maintenance. The

accuracy of location data can be affected by

adjustments to GPS satellites made by the United States

government and is subject to change with the United

States Department of Defense civil GPS policy and the

Federal Radionavigation Plan. Accuracy can also be

affected by poor satellite geometry. Availability and

quality of GPS signals may be affected by your location,

buildings, natural obstacles, and weather conditions.

The GPS receiver should only be used outdoors to allow

reception of GPS signals.

Any GPS should not be used for precise location

measurement, and you should never rely solely on

location data from the GPS receiver and cellular radio

networks for positioning or navigation.

The trip meter has limited accuracy, and rounding

errors may occur. Accuracy can also be affected by

availability and quality of GPS signals.

To enable or disable different positioning methods,

such as Bluetooth GPS, select Menu > Tools >

Settings > General > Positioning > Positioning

methods.

About satellite signals

If your device cannot find the satellite signal, consider

the following:

•If you are indoors, go outdoors to receive a better

signal.

•If you are outdoors, move to a more open space.

•Ensure that your hand does not cover the GPS

antenna of your device.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

•If the weather conditions are bad, the signal

strength may be affected.

•Establishing a GPS connection may take from a

couple of seconds to several minutes.

Satellite status

To check how many satellites your device has found,

and whether your device is receiving satellite signals,

select Menu > GPS > GPS data > Position >

Options > Satellite status. If your device has found

satellites, a bar for each satellite is shown in the

satellite info view. The longer the bar, the stronger the

satellite signal. When your device has received enough

data from the satellite signal to calculate the

coordinates of your location, the bar turns black.

Initially your device must receive signals from at least

four satellites to be able to calculate the coordinates of

your location. When the initial calculation has been

made, it may be possible to continue calculating the

coordinates of your location with three satellites.

However, the accuracy is generally better when more

satellites are found.

Positioning settings

Select Menu > Tools > Settings > General >

Positioning.

To use a specific positioning method to detect the

location of your device, select Positioning methods.

To select a positioning server, select Positioning

server.

Maps

Select Menu > GPS > Maps.

With Maps, you can see your current location on the

map, browse maps for different cities and countries,

search for addresses and different points of interest,

plan routes from one location to another, and save

locations and send them to compatible devices. You

can also purchase licences for extra services, such as

travel guides, traffic information, and navigation

service with voice guidance. These services are not

available for all countries or regions.

If you browse to an area which is not covered by maps

already downloaded in your device, a map for the area

is automatically downloaded through the internet.

Some maps may be available in your device or memory

card. You can also use the Nokia Map Loader PC

software to download maps. To install Nokia Map

Loader to a compatible PC, go to

www.maps.nokia.com.

Downloading maps may involve the transmission of

large amounts of data through your service provider's

network. Contact your service provider for information

about data transmission charges.

When you use Maps for the first time, you may need to

select a cellular or a WLAN access point for

downloading maps. To change the access point later,

select Options > Settings > Internet > Default

access point.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

About Maps

To connect to the internet automatically when you

start Maps, select Options > Tools > Settings >

Internet > Go online at start-up > Always on.

To prevent automatic downloading of maps, select

Options > Tools > Settings > Internet > Go

online at start-up > Never.

To set the device to ask your permission before

connecting to the internet, select Options > Tools >

Settings > Internet > Go online at start-up >

Always ask.

To be informed when your device registers to a

network other than your home network, select

Options > Tools > Settings > Internet >

Roaming warning > On (shown only when you are

online). For details and roaming costs, contact your

service provider.

Tip: To avoid data transfer costs, you can also

use Maps without an internet connection, and

browse the maps that are saved in your device

or memory card.

Almost all digital cartography is inaccurate and

incomplete to some extent. Never rely solely on the

cartography that you download for use in this device.

Move on a map

The map coverage varies by country and region.

When you open Maps, the capital of the country you are

in or the location that was saved from your last session

is shown. The map of the location is also downloaded,

if needed.

To zoom in to your GPS position or your last known

location, press 0.

When the GPS connection is active, shows your

current location on the map.

To move on the map, scroll up, down, left, or right with

the scroll key. The map is oriented towards north by

default.

To zoom in and out on the map, press * and #.

When you browse the map on the display, a new map

is automatically downloaded if you scroll to an area

which is not covered by maps already downloaded.

These maps are free of charge, but downloading may

involve the transmission of large amounts of data

through your service provider's network. For more

information on data transmission charges, contact

your service provider. The maps are automatically

saved in the device memory or on a compatible

memory card (if inserted).

Display indicators

The GPS indicator on the bottom right

corner of the display shows the availability and

strength of the satellite signal. One bar is one satellite.

When the device tries to find a satellite, the bar is

yellow. When the device receives enough data from the

satellite to establish a GPS connection, the bar turns

green. The more green bars, the stronger the GPS

connection.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Initially, your device must receive signals from at least

four satellites to calculate the coordinates of your

location. After the initial calculation, signals from three

satellites may be enough.

The data transfer indicator shows the

internet connection used and the amount of data

transferred since the application started.

Find locations

To find a location in the city or area displayed on the

map, enter the full or partial address of the location in

the search field, and press the scroll key. To find a

location in another city, enter the city and the full or

partial address, such as London Oxford Street, and

press the scroll key.

To find a specific address, or an address in another

country, press the scroll key, and select Browse >

Addresses. Country/Region * and City or post code

are mandatory.

Tip: To search for locations in another country

using the search field, enter also the name of the

country in the search field: Rome Italy.

To import a location address from the Contacts

application, press the scroll key and select Browse >

Addresses > Options > Contact.

The search results are grouped by categories. To limit

the search to one category, select Options > Search.

If you search for locations without an internet

connection, the search results are limited to a radius of

50 km (31 miles).

Plan a route

To plan a route, select your start point on the map or

search for a location, press the scroll key, and select

Add > To route.

To define the destination and add more locations for

your route, search for the location, and select

Options > Add stopover.

To show the route on the map, select Options > Show

route.

To navigate to the destination by car or on foot, if you

have purchased a licence for these extra services, select

Options > Start driving or Start walking.

To save the route, select Options > Save route.

GPS data

Select Menu > GPS > GPS data.

With GPS data, you can view your current location, find

your way to a desired location, and track distance.

Select Navigation to view navigating information to

your trip destination, Position to view positioning

information about your current location, or Trip dist.

to view your travelling information such as the

distance and duration you have travelled, and your

average and maximum speeds.

The application must receive positioning information

from at least four satellites to be used as a travelling

aid.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

The trip meter has limited accuracy, and rounding

errors may occur. Accuracy can also be affected by

availability and quality of GPS signals.

Use GPS data

To check the signal strength of the satellites that

provide the positioning information necessary for

navigation, open any of the three views and select

Options > Satellite status.

To set a landmark or location as the destination of your

trip, select Navigation > Options > Set

destination. You can also enter the destination

latitude and longitude coordinates.

To remove the destination set for your trip, select

Navigation > Options > Stop navigation.

To save your current position as a landmark, select

Navigation or Position, and Options > Save

position.

To activate the trip meter, select Trip dist. >

Options > Start. To stop the trip meter, select

Options > Stop.

To reset all fields and start calculating the trip again,

select Trip dist. > Options > Restart.

To change the measuring system in use, select

Options > Settings > Measurement system >

Metric or Imperial.

To enter the altitude calibration to correct the altitude

received from the positioning satellites, select

Options > Settings > Altitude calibration.

Landmarks

Select Menu > GPS > Landmarks.

Landmarks are coordinates to geographic locations

that you can save to your device for later use in

different location-based services. You can create

landmarks using the internal GPS receiver of your

device or network (network service).

Create a landmark

To create a landmark, select Options > New

landmark. Select Current position to make a network

request for the latitude and longitude coordinates of

your current location, Use map to select the location

from a map, or Enter manually to fill in necessary

location information such as a name, category,

address, latitude, longitude, and altitude.

To show the landmark on the map, select Options >

Show on map.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Nokia Office Tools

Nokia Office Tools support mobile business and enable

effective communication with work teams.

Active notes

Select Menu > Office > Active notes.

Active notes allows you to create, edit, and view

different kinds of notes, for example, meeting memos,

hobby notes, or shopping lists. You can insert images,

videos, and sound in the notes. You can link notes to

other applications, such as Contacts, and send notes to

others.

To create a note, start writing.

To edit a note, scroll to it, and press the scroll key.

To insert images, sound clips, video, business cards,

web bookmarks, and files, select Options > Insert

object.

To add new items to the note, select Options > Insert

new. You can record sound and video clips, and capture

images.

To add boldface, italics, or underlining to your text or

change the font colour, press and hold the shift key and

use the scroll key to select the text. Then select

Options > Text.

To send the note using a text message, multimedia

message, e-mail, Bluetooth, or infrared, select

Options > Send.

To link a note to a contact, select Options > Link note

to call > Add contacts. You can see the note on the

display of your device when making a call to or

receiving a call from the contact.

Calculator

Select Menu > Office > Calculator.

This calculator has limited accuracy and is designed for

simple calculations.

To make a calculation, enter the first number of the

calculation. Select a function such as add or subtract

from the function map. Enter the second number of the

calculation, and select =. The calculator performs

operations in the order they are entered. The result of

the calculation remains in the editor field and can be

used as the first number of a new calculation.

The device saves the result of the last calculation in its

memory. Exiting the Calculator application or

switching off the device does not clear the memory. To

recall the last saved result the next time you open the

Calculator application, select Options > Last result.55

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To save the numbers or results of a calculation, select

Options > Memory > Save.

To retrieve the results of a calculation from the memory

and use them in a calculation, select Options >

Memory > Recall.

File manager

Select Menu > Office > File mgr..

With File manager, you can manage the contents and

properties of files and folders on your device memory

and memory card. You can open, create, move, copy,

rename, send, and search for files and folders.

Open the device tab or the memory card tab.

To select multiple files, scroll to each file, and select

Options > Mark/Unmark > Mark.

To send the selected files, select Options > Send.

To move or copy files or folders to another folder, select

Options > Move to folder or Copy to folder. Default

folders such as Sound clips in Gallery cannot be moved.

To search for files, select Options > Find. Enter the

search text, and press the scroll key. The folders and

files whose names contain the search text are

displayed.

To view information about the selected file, select

Options > Details. To view additional information

about the file online, select Options > Additional

details.

Quickoffice

Select Menu > Office > Quickoffice.

Quickoffice consists of Quickword for Microsoft Word,

Quicksheet for Microsoft Excel, Quickpoint for Microsoft

PowerPoint, and Quickmanager for purchasing

software. You can view Microsoft Office 2000, XP, and

2003 documents (*.doc, *.xls, and *.ppt) with

Quickoffice. If you have the editor version of

Quickoffice, you can also edit files.

All file formats or features are not supported.

Work with files

To open a file, scroll to it, and press the scroll key.

To sort files according to the type, select Options >

Sort by.

To view the details of a file, select Options >

Details. The details include the name, size and location

of the file, and the time and date when the file was last

modified.

To send files to a compatible device, select Options >

Send and the sending method.

Converter

Select Menu > Office > Converter.

The converter has limited accuracy, and rounding

errors may occur.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Convert measurements

1. Scroll to the Type field, and select Options >

Conversion type to open a list of measures. Select

the measure to use, and select OK.

2. Scroll to the first Unit field, and select Options >

Select unit. Select the unit from which to convert,

and select OK. Scroll to the next Unit field, and

select the unit to which to convert.

3. Scroll to the first Amount field, and enter the value

to convert. The other Amount field changes

automatically to show the converted value.

Set base currency and

exchange rate

When you change base currency, you must enter new

exchange rates because all previously set exchange

rates are cleared.

Before you can make currency conversions, you must

choose a base currency and add exchange rates. The

rate of the base currency is always 1. The base currency

determines the conversion rates of the other

currencies.

1. To set the rate of exchange for the unit of currency,

scroll to the Type field, and select Options >

Currency rates.

2. Scroll to the currency type and enter the exchange

rate you would like to set per single unit of

currency.

3. To change the base currency, scroll to the currency,

and select Options > Set as base currency.

4. Select Done > Yes to save the changes.

After you have inserted all the necessary exchange

rates, you can make currency conversions.

Zip manager

Select Menu > Office > Zip.

With Zip manager, you can create new archive files to

store compressed ZIP formatted files; add single or

multiple compressed files or directories to an archive;

set, clear, or change the archive password for protected

archives; and change settings, such as compression

level, and file name encoding.

You can store the archive files on the device memory

or on a memory card.

PDF reader

Select Menu > Office > Adobe Reader.

With PDF reader you can read PDF documents on the

display of your device; search for text in the

documents; modify settings, such as zoom level and

page views; and send PDF files using e-mail.

Printing

You can print documents, such as files, messages, or

web pages, from the device, preview a print job, define

page layout options, select a printer, or print to a file.

You may not be able to print all types of documents. 57

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To configure a printer for your device, select Menu >

Office > Printers > Options > Add. To set the

printer as the default printer, select Options >

Printing options > Printers, scroll to the printer and

select Options > Set as default.

Before you print, make sure your device is properly

connected to the printer.

To print a document, select Options > Printing

options > Print.

To print to a file, select Options > Printing

options > Print > Print to file, and determine the

location for the file.

To change the printing options, select Options >

Printing options. You can select the printer you want

to use, the number of copies and the range of pages

you want to print.

To change the page layout before printing, select

Options > Printing options > Page setup. You can

change the paper size and orientation, define the

margins, and insert a header or a footer. The maximum

length of the header and footer is 128 characters.

To preview a file or message before you print, select

Options > Printing options > Preview.

Clock

Select Menu > Office > Clock.

In Clock, you can view your local time and time zone

information, set and edit alarms, or modify date and

time settings.

Alarm clock

Open the alarm clock tab.

To set an alarm, select Options > Set alarm. When an

alarm is active, is displayed.

To switch off the alarm, select Stop, or to stop the

alarm for 5 minutes, select Snooze. If the alarm time

is reached while the device is switched off, the device

switches itself on and starts sounding the alarm tone.

If you select Stop, the device asks whether you want

to activate the device for calls. Select No to switch off

the device or Yes to make and receive calls. Do not

select Yes when wireless phone use may cause

interference or danger.

To change the alarm time, select Options > Reset

alarm.

To remove the alarm, select Options > Remove

alarm.

Clock settings

Select Options > Settings.

To change the time or date, select Time or Date.

To change the clock shown on the home screen, select

Clock type > Analogue or Digital.

To allow the mobile phone network to update the time,

date, and time zone information to your device

(network service), select Network operator time >

Auto-update.

To change the alarm tone, select Clock alarm tone.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Notes

Select Menu > Office > Notes.

You can create and send notes to other compatible

devices, and save received plain text files (.txt format)

to Notes.

To write a note, start entering the text. The note editor

opens automatically.

To open a note, scroll to it, and press the scroll key.

To send a note to other compatible devices, select

Options > Send.

To synchronise or to define synchronisation settings

for a note, select Options > Synchronisation. Select

Start to initialise synchronisation or Settings to define

the synchronisation settings for the note.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Media

Your device contains a variety of media applications for

both business and leisure time use.

Camera

Select Menu > Media > Camera.

Capture an image

Your device supports an image capture resolution of

up to 2048 x 1536 pixels. The image resolution in this

guide may appear different.

To capture an image, use the display as a viewfinder

and press the scroll key. The device saves the image in

Gallery.

To capture an image, use the display as a viewfinder

and press the capture key. The device saves the image

in Gallery.

To zoom in or out before capturing an image, scroll up

or down. This function is available only when the

toolbar is not shown.

To focus on the subject before capturing the image,

press the T key.

The toolbar provides you with shortcuts to different

items and settings before and after capturing an image

or recording a video. Scroll to a toolbar item and press

the scroll key.

Switch between the video mode and the image

mode.

Select the scene.

Select the flash mode (images only).

Activate the self-timer (images only).

Activate the sequence mode (images only).

Select a colour effect.

Show or hide the viewfinder grid (images only).

Adjust the white balance.

Adjust the exposure compensation (images only).

The available options vary depending on the capture

mode and view you are in. The settings return to the

default after you close the camera.

To view the toolbar before and after capturing an

image or recording a video, select Options > Show

icons.

To view the toolbar only when you need it, select

Options > Hide icons.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To activate the toolbar when it is hidden, scroll left. The

toolbar is visible for 5 seconds.

Record videos

1. If the camera is in the image mode, select the video

mode from the toolbar.

2. To start recording, press the capture key.To start

recording, press the scroll key.

3. To pause recording at any time, select Pause. Select

Continue to resume recording.

4. To stop recording, select Stop. The video clip is

automatically saved in Gallery. The maximum

length of the video clip depends on the available

memory.

Nokia Podcasting

Select Menu > Media > Podcasting.

Download podcasts to your device and listen them.

Play and manage podcasts

Podcasting delivers audio or video content over the

internet for playback on mobile devices and PCs.

With the Nokia Podcasting application, you can search,

discover, subscribe, and download podcasts over the

air; and play, manage, and share podcasts with your

device.

Define the connection and downloading settings

before using the application. Select Options >

Settings > Connection and Download.

To search for new podcast episodes to subscribe to,

select Directories.

To search for podcasts using keywords and podcast

show titles, select Search.

To display the available episodes from the selected

podcast, open the Podcasts folder and select Open.

To download the selected episode, select Download.

To play the downloaded episode, select Play.

To update the selected podcast or marked podcasts, for

a new episode, select Options > Update.

To open the web site of the podcast (network service),

select Options > Open web page.

Some podcasts provide the opportunity to interact

with the creators by commenting and voting. To

connect to the internet to do this, select Options >

View comments.

Search podcasts

Search helps you find podcasts by keyword or title.

The search engine uses the podcast search service you

set up in Podcasting > Options > Settings >

Connection > Search service URL.

To search for podcasts, select Search, and enter the

desired keywords.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Tip: Search looks for podcast titles and keywords

in descriptions, not specific episodes. General

topics, such as football or hip-hop, usually give

better results than a specific team or artist.

To subscribe to selected channels and add them to your

podcasts, select Subscribe.

To start a new search, select Options > New search.

To see the details of a podcast, select Options >

Description.

Music player

Warning: Listen to music at a moderate level.

Continuous exposure to high v olu me m ay damage your

hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be

extremely loud.

Select Menu > Media > Music player.

Music player supports files formats such as AAC, AAC+,

eAAC+, MP3, and WMA. Music player does not

necessarily support all features of a file format or all

the variations of file formats.

You can also use Music player to listen to podcast

episodes. Podcasting is a method for delivering audio

or video content over the internet using either RSS or

Atom technologies for playback on mobile devices and

PCs.

You can transfer music from other compatible devices

to your device. See "Transfer music from PC", p. 63.

Play a song or a podcast

episode

To add all available songs and podcasts to the music

library, select Options > Refresh.

To play a song or a podcast episode, select Music or

Podcasts and the desired category, then scroll to the

song or podcast episode and press the scroll key.

To pause playback, press the scroll key; to resume,

press the scroll key again. To stop playback, scroll

down.

To fast forward or rewind, press and hold the scroll key

to the right or left.

To go to the next item, scroll right. To return to the

beginning of the item, scroll left. To skip to the previous

item, scroll left again within 2 seconds after a song or

podcast has started.

To modify the tone of the music playback, select

Options > Equaliser.

To modify the balance and stereo image or to enhance

bass, select Options > Audio settings.

To view a visualisation during playback, select

Options > Show visualisation.

To return to the home screen and leave the player

playing in the background, press the end key.

Playlists

To view and manage playlists, select Music >

Playlists.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To create a new playlist, select Options > Create

playlist.

To add songs to the playlist, select the song and

Options > Add to a playlist > Saved playlist or New

playlist.

To reorder songs in a playlist, scroll to the song you

want to move, and select Options > Reorder list.

Nokia Music Store

Select Menu > Media > Music store.

In the Nokia Music Store (network service) you can

search, browse, and purchase music to download to

your device. To purchase music, you need to register

for the service.

To check the Nokia Music Store availability in your

country, visit www.nokia.com/music.

To find more music in the different categories, select

Options > Find in Music store.

To select the access point to use with the Music Store,

select Default acc. pt..

Transfer music from PC

To transfer music from your PC, connect your device to

the PC with a compatible USB data cable or Bluetooth

connectivity. If you are using the USB cable, select Mass

storage as the connection mode. Make sure that a

compatible memory card is inserted in the device.

You can also use Windows Media Player to synchronise

music between your device and PC.

Share online

Select Menu > Media > Share online.

You can share images and video clips in compatible

online albums, blogs, or in other compatible online

sharing services on the web. You can upload content,

save unfinished posts as drafts and continue later, and

view the content of the albums. The supported content

types may vary depending on the service provider.

To share files online, you must have an account with

an online image sharing service. You can usually

subscribe to such a service on the web page of your

service provider. Contact your service provider for more

information.

Share images online

To upload a file from Gallery to the online service, select

Menu > Gallery, select the desired file and Options >

Send > Post to web.

Recorder

Select Menu > Media > Recorder.

With Recorder, you can record up to 60 minutes of a

voice memo, save the voice recording as a sound clip,

and play the sound clip. Recorder supports the AMR file

format.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Gallery

Select Menu > Media > Gallery.

Use Gallery to access and use different types of media,

including images, videos, music, and sounds. All

viewed images and videos, and all received music and

sounds are automatically saved to Gallery. Sound clips

are opened in the Music player, and video clips and

streaming links in the RealPlayer application. Images

are opened in the image viewer.

Work with media files and

folders

To open a file or a folder, scroll to it, and press the scroll

key.

To create a new folder, select a file and then select

Options > Organise > New folder. You cannot

create folders within folders.

To copy or move files, select a file and Options >

Organise > Move to folder, New folder, Move to

memory card, Copy to memory card, Copy to phone

mem., or Move to phone mem..

To download files into Gallery using the browser, select

Downl. graphics, Downld. videos, Downld. tracks,

or Downld. sounds. The browser opens, and you can

choose a bookmark or enter the address for the

download site.

To search for a file, select Options > Find. Write the

item you are searching for. Files that match the search

are shown.

View images

To open an image for viewing, select Options >

Open.

To open the next or previous image for viewing, scroll

right or left.

To enlarge the image on the display, select Options >

Zoom in. To reduce the image on the display, select

Zoom out.

To view the image in full screen size, select Options >

Full screen. To return to normal view, select Options >

Normal screen.

To rotate the image, select Options > Rotate. Select

Right to rotate the image clockwise by 90 degrees, or

select Left to rotate the image counterclockwise by 90

degrees.

RealPlayer

Select Menu > Media > RealPlayer.

RealPlayer plays video clips and audio files that are

stored in the device memory or on a memory card,

transferred to your device from an e-mail message or

a compatible computer, or streamed to your device

over the web. Supported formats include MPEG-4, MP4

(not streaming), 3GP, RV, RA, AMR, and Midi. RealPlayer

does not necessarily support all variations of a media

file format.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Play video clips and stream

links

Warning: Do not hold the device near your ear

when the loudspeaker is in use, because the volume

may be extremely loud.

To play a video clip or audio file, select Options >

Open > Most recent clips to play one of the six clips

you most recently played, or Saved clip to play a clip

or open a web link. Select Play.

To play streaming media, select a web link that points

to a clip, and select Play; or connect to the web, browse

to a video clip or audio file, and select Play. RealPlayer

recognises two kinds of links: an rtsp:// URL and an

http:// URL that points to a RAM file. Before the content

begins streaming, your device must connect to a web

site and buffer the content. If a network connection

problem causes a playback error, RealPlayer attempts

automatically to reconnect to the internet access point.

To adjust the volume during playback, use the volume

keys.

To fast-forward during playback, scroll up and hold. To

rewind during play, scroll down and hold.

To stop the playback or streaming, select Stop.

Buffering or connecting to the streaming site stops, the

playback of the clip stops, and the clip rewinds to the

beginning.

To download video clips from the web, select

Options > Download videos.

To view the video clip in full-screen size, select

Options > Play in full screen. Full screen increases

the size of the video to cover the maximum video area

possible while the aspect ratio is maintained.

Tip: To switch between the normal screen and

full screen quickly, press 2 on the keypad.

Flash player

Select Menu > Media > Flash Player.

With Flash player, you can view, play, and interact with

flash files made for mobile devices.

Radio

Select Menu > Media > Radio.

The quality of the radio broadcast depends on the

coverage of the radio station in that particular area.

The FM radio depends on an antenna other than the

wireless device antenna. Attach a compatible headset

or enhancement to the device for the FM radio to

function properly.

Listen to the radio

Warning: Listen to music at a moderate level.

Continuous exposure to high volume may damage your

hearing. Do not hold the device near your ear when the

loudspeaker is in use, because the volume may be

extremely loud. 65

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To search for a station, select or . To set the

frequency manually, select Options > Manual

tuning.

To view available stations based on location, select

Options > Station directory (network service).

To save the current station to your station list, select

Options > Save station.

To select a previously saved radio station, select or

To adjust the volume, use the volume keys.

To switch from headset use to listening to the radio

through the loudspeaker, select Options > Activate

loudspeaker.

To return to the home screen and leave the FM radio

playing in the background, select Options > Play in

background.

View visual content

To check availability and costs, and to subscribe to the

service, contact your service provider.

Before you can view visual content, you must have an

internet access point defined at Menu > Tools >

Settings > Connection > Access points.

1. To view available visual content for a tuned station,

select Options > Start visual service. If the visual

radio service ID has not been saved for the station,

enter it, or select Retrieve to search for it in the

station directory (network service).

2. Select the location nearest to you from the station

directory. If your device finds a station that matches

the tuned frequency, its visual service ID is

displayed. To view the visual content, select OK.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Personalisation

You can personalise your device by adjusting the

various tones, background images, and screen savers,

for example.

Profiles

Select Menu > Tools > Profiles.

You can adjust and customise the ringing tones, alert

tones, and other device tones for different events,

environments, or caller groups. The profile currently in

use is shown at the top of the display on the home

screen. However, if the active profile is General, only

today's date is shown.

To create a new profile, select Options > Create

new, and define the settings.

To customise a profile, select a profile and Options >

Personalise.

To change a profile, select a profile and Options >

Activate. The Offline profile prevents your device from

accidentally switching on, sending or receiving

messages, or using wireless LAN, Bluetooth, GPS, or FM

radio; it also closes any internet connection that may

be in operation when the profile is selected. The Offline

profile does not prevent you from establishing a

wireless LAN or Bluetooth connection at a later time,

or from restarting the GPS or FM radio, so comply with

any applicable safety requirements when establishing

and using these features.

To delete a profile that you created, select Options >

Delete profile. You cannot delete the predefined

profiles.

Select ringing tones

To set a ringing tone for a profile, select Options >

Personalise > Ringing tone. Select a ringing tone

from the list, or select Download sounds to open a

bookmark folder containing a list of bookmarks for

downloading tones using the browser. Any

downloaded tones are saved to Gallery.

To play the ringing tone for a selected contact group

only, select Options > Personalise > Alert for, and

select the desired group. Phone calls coming from

outside that group have a silent alert.

To change the message tone, select Options >

Personalise > Message alert tone.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Personalise the home

screen

Select Menu > Tools > Modes.

To change the name of the current home screen, select

Mode name.

To select which applications and notifications you

want to see on the home screen, select Home screen

plug-ins.

To change the theme of the home screen currently in

use, select Theme.

To change the background image of the home screen

currently in use, select Wallpaper.

To change from one home screen to another, select

Switch mode.

Change the display

theme

Select Menu > Tools > Themes.

To change the theme used in all applications, select the

General folder.

To change the theme used in the main menu, select the

Menu view folder.

To change the theme for a particular application, select

the application-specific folder.

To change the background image of the home screen,

select the Wallpaper folder.

To select an image or write a text for the screen saver,

select the Power saver folder.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Connectivity

Your device offers several options to connect to the

internet, a corporate intranet, or to another device or

computer.

Fast downloading

High-speed downlink packet access (HSDPA, also called

3.5G, indicated by ) is a network service in UMTS

networks and provides high-speed data downloads.

When HSDPA support in the device is activated and the

device is connected to a UMTS network that supports

HSDPA, downloading data such as messages, e-mail,

and browser pages through the cellular network may

be faster. An active HSDPA connection is indicated by

. The icon may vary between regions.

To activate or deactivate HSDPA, select Menu >

Tools > Settings > Connection > Packet data >

High speed packet access. Some cellular networks do

not allow incoming voice calls when HSDPA is active, in

which case you need to deactivate HSDPA to receive

calls. Contact your network operator for details.

For availability and subscription to data connection

services, contact your service provider.

HSDPA only affects the download speed; sending data

to the network, such as messages and e-mail, is not

affected.

Data cable

Transfer data between your device and a PC

1. Insert a memory card to your device and connect

the device to a compatible PC with the USB data

cable.

2. When the device asks which mode is used, select

Mass storage. In this mode, you can see your

device as a removable hard drive in your computer.

3. End the connection from the computer (for

example, from an Unplug or Eject Hardware wizard

in Windows) to avoid damaging the memory card.

To use Nokia PC Suite with your device, install Nokia PC

Suite on your PC, connect the data cable, and select PC

Suite.

To use your device to connect your PC to the web,

connect the data cable, and select Connect PC to Net.

To synchronise the music in your device with Nokia

Music Player, install the Nokia Music Player software on

your PC, connect the data cable, and select Media

transfer.

To change the USB mode you normally use with the

data cable, select Menu > Connectivity > USB >

USB connection mode and the desired option. 69

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To set the device to ask for the mode each time you

connect the USB data cable to the device, select

Menu > Connectivity > USB > USB connection

mode > Ask on connection > Yes.

Bluetooth

Select Menu > Connectivity > Bluetooth.

About Bluetooth

Bluetooth technology enables wireless connections

between electronic devices within a range of 10 metres

(33 feet). A Bluetooth connection can be used to send

images, videos, text, business cards, calendar notes, or

to connect wirelessly to devices that use Bluetooth

technology.

Since devices using Bluetooth technology

communicate using radio waves, your device and the

other devices do not need to be in direct line-of-sight.

The two devices only need to be within a maximum of

10 metres of each other, although the connection can

be subject to interference from obstructions such as

walls or other electronic devices.

Several Bluetooth connections can be active at a time.

For example, if your device is connected to a headset,

you can also transfer files to another compatible device

at the same time.

Features using Bluetooth technology increase the

demand on battery power and reduce the battery life.

Send and receive data with

Bluetooth

1. When you activate Bluetooth for the first time, you

are asked to give a name to your device. Give your

device a unique name to make it easy to recognise

if there are several Bluetooth devices in the vicinity.

2. Select Bluetooth > On.

3. Select My phone's visibility > Shown to all or

Define period. If you select Define period, you

need to define the time during which your device

is visible to others. Your device and the name you

entered can now be seen by other users with

devices using Bluetooth technology.

4. Open the application where the item you want to

send is stored.

5. Select the item, and select Options > Send > Via

Bluetooth. The device searches for other devices

using Bluetooth technology within range and lists

them.

Tip: If you have sent data using Bluetooth

before, a list of the previous search results is

displayed. To search for more Bluetooth

devices, select More devices.

6. Select the device with which you want to connect.

If the other device requires pairing before data can

be transmitted, you are asked to enter a passcode.

When the connection has been established, Sending

data is shown.

The Sent folder in the Messaging application does not

store messages sent using Bluetooth connectivity.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To receive data using Bluetooth, select Bluetooth >

On and My phone's visibility > Shown to all to

receive data from a non-paired device or Hidden to

receive data from a paired device only. When you

receive data through Bluetooth, a tone sounds, and you

are asked if you want to accept the message in which

the data is included. If you accept, the message is

placed in the Inbox folder in the Messaging application.

Tip: You can access the files in the device or on

the memory card using a compatible accessory

that supports the File Transfer Profile Client

service (for example, a laptop computer).

A Bluetooth connection is disconnected automatically

after sending or receiving data. Only Nokia PC Suite and

some enhancements such as headsets may maintain a

connection even if not actively used.

Pair devices

Open the paired devices tab.

Before pairing, create your own passcode (1-16 digits),

and agree with the user of the other device to use the

same code. Devices that do not have a user interface

have a fixed passcode. You need the passcode only

when you connect the devices for the first time. After

pairing, it is possible to authorise the connection.

Pairing and authorising the connection makes

connecting quicker and easier, as you do not have to

accept the connection between paired devices every

time you establish a connection.

The passcode for remote SIM access must have 16

digits.

1. Select Options > New paired device. The device

starts to search for Bluetooth devices within range.

If you have sent data using Bluetooth before, a list

of the previous search results is displayed. To search

for more Bluetooth devices, select More devices.

2. Select the device with which you want to pair, and

enter the passcode. The same passcode must be

entered to the other device as well.

3. Select Yes to make the connection between your

device and the other device automatic, or No to

confirm the connection manually every time a

connection attempt is made. After pairing, the

device is saved to the paired devices page.

To give a nickname to the paired device, select

Options > Assign short name. The nickname is only

displayed in your device.

To delete a pairing, select the device whose pairing you

want to delete and Options > Delete. To delete all

pairings, select Options > Delete all. If you are

currently connected to a device and cancel the pairing

with that device, pairing is removed immediately, and

the connection is ended.

To allow a paired device to connect automatically to

your device, select Set as authorised. Connections

between your device and the other device can be made

without your knowledge. No separate acceptance or

authorisation is needed. Use this status for your own

devices, such as your compatible headset or computer,

or devices that belong to someone you trust. If you

want to accept connection requests from the other

device separately every time, select Set as

unauthorised.71

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To use a Bluetooth audio enhancement such as a

Bluetooth handsfree or headset, you need to pair your

device with the enhancement. See the enhancement

user guide for the passcode and further instructions.

To connect to the audio enhancement, switch on the

enhancement. Some audio enhancements connect

automatically to your device. Otherwise open the

paired devices tab, scroll to the enhancement, and

select Options > Connect to audio device.

Security tips

When you are not using Bluetooth connectivity, select

Bluetooth > Off or My phone's visibility >

Hidden.

Do not pair with an unknown device.

Wireless LAN

Some places, like France, have restrictions on the use

of wireless LAN. Check with your local authorities for

more information.

Your device can detect and connect to a wireless local

area network (WLAN). To use WLAN, a network must be

available in the location and your device must be

connected to it.

WLAN connections

Important: Always enable one of the available

encryption methods to increase the security of your

wireless LAN connection. Using encryption reduces the

risk of unauthorised access to your data.

To use WLAN, you must create an internet access point

in a WLAN. Use the access point for applications that

need to connect to the internet. A WLAN connection is

established when you create a data connection using

a WLAN access point. The active WLAN connection is

ended when you end the data connection. You can also

end the connection manually. See "Connection

manager", p. 74.

You can use WLAN during a voice call or when packet

data is active. You can only be connected to one WLAN

access point device at a time, but several applications

can use the same internet access point.

When the device is in the Offline profile, you can still

use WLAN, if available. Remember to comply with any

applicable safety requirements when establishing and

using a WLAN connection.

If you move the device to another location within the

WLAN and out of range of a WLAN access point, the

roaming functionality can automatically connect your

device to another access point that belongs to the same

WLAN. As long as you remain within range of access

points that belong to the same network, your device

can stay connected to the network.

Tip: To check the unique media access control

(MAC) address that identifies your device, for

example to configure the MAC address of your

device to a WLAN router, enter *#62209526# on

the device keypad. The MAC address is shown on

the device display.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

See WLAN availability

To have your device show WLAN availability, select

Menu > Tools > Settings > Connection >

Wireless LAN > Show WLAN availability.

If WLAN is available, is shown on the display.

Tip: You can also scan for networks in range.

WLAN wizard

Select Menu > Connectivity > WLAN wiz..

The WLAN wizard helps you find and connect to a

wireless LAN. When you open the application, your

device starts to scan for available WLANs and lists them.

To update the list of available WLANs, select Options >

Refresh.

To start or continue browsing the web using the access

point of the WLAN, scroll to the desired network, and

select Options > Start Web browsing or Cont. Web

browsing.

To disconnect the active connection to the WLAN, select

Options > Disconnect WLAN.

To view the details of the WLAN, select Options >

Details.

To save the access point of the WLAN, select Options >

Define access point.

Always enable one of the available encryption methods

to increase the security of your WLAN connection. Using

encryption reduces the risk of unauthorised access to

your data.

Use the wizard on the home screen

On the home screen, the WLAN wizard shows the status

of your WLAN connections and network searches. To

view the available options, scroll to the row showing

the status, and press the scroll key. Depending on the

status, you can start the Web browser using a WLAN

connection, connect to your net call service, disconnect

from a WLAN, search for WLANs, or set the network

scanning on or off.

If WLAN scanning is off and you are not connected to

any WLAN, WLAN scanning off is displayed on the

home screen. To set scanning on and search for

available WLANs, scroll to the row showing the status,

and press the scroll key.

To start a search for available WLANs, scroll to the row

showing the status, press

the scroll key, and select

Search for WLAN. To set

WLAN scanning off, scroll to

the row showing the status,

press the scroll key, and

select Switch WLAN scan

off.

When Start Web

browsing or Use for is

selected, the WLAN wizard

automatically creates an

access point for the selected

WLAN. The access point can also be used with other

applications requiring WLAN connection.

If you select a secured WLAN, you are asked to enter

the relevant passcodes. To connect to a hidden 73

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

network, you must enter the correct service set

identifier (SSID).

To use the found WLAN for a net call connection, scroll

to the row showing the status, and press the scroll key.

Select Use for, the desired net call service, and the

WLAN to be used.

Modem

Select Menu > Connectivity > Modem.

Together with a compatible computer, you can use

your device as a modem to connect to the web, for

example.

Before you can use your device as a modem

•You need an appropriate data communications

software on your computer, such as Nokia PC Suite.

For more information, see the Nokia PC Suite guide.

•You must subscribe to the appropriate network

services from your service provider or internet

service provider.

•You must have the appropriate drivers installed on

your computer. You must install drivers for the cable

connection, and you may need to install or update

Bluetooth or infrared drivers.

To connect the device to a compatible computer using

infrared, press the scroll key. Make sure the infrared

ports of the device and computer are directly facing

each other with no obstacles between them.

To connect your device to a computer using Bluetooth

wireless technology, initiate the connection from the

computer. To activate Bluetooth in your device, select

Menu > Connectivity > Bluetooth and select

Bluetooth > On.

If you use a cable to connect your device to a computer,

initiate the connection from the computer.

You may not be able to use some of the other

communication features when the device is used as a

modem.

Connection manager

Select Menu > Connectivity > Conn. mgr..

View and end active

connections

To see the open data connections, select Active data

connections.

To view detailed information about network

connections, select a connection from the list and

Options > Details. The type of information shown

depends on the connection type.

To end the selected network connection, select

Options > Disconnect.

To end all active network connections simultaneously,

select Options > Disconnect all.

Search for WLAN

To search for WLANs available within range, select

Available WLAN networks. The available WLANs are

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

listed with their network mode (infrastructure or ad-

hoc), signal strength, and network encryption

indicators, and whether your device has an active

connection with the network.

To view the details of a network, scroll to it, and press

the scroll key.

To create an internet access point for a network, select

Options > Define access point.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Security and data management

Manage the data and software on your device, and take

care of the security of the device and its contents.

Important: Your device can only support one

antivirus application. Having more than one

application with antivirus functionality could affect

performance and operation or cause the device to stop

functioning.

Lock the device

Important: If the device has been locked, enter the

lock code to activate the phone function. When the

device is locked, calls may be possible to the official

emergency number. Making an emergency call in the

offline profile or when the device is locked requires

that the device recognise the number to be an official

emergency number. It is advisable to change the

profile or unlock the device by entering the lock code

before you make the emergency call.

To prevent access to the contents of your device, lock

the device when in home screen. Press the power key,

select Lock phone, and enter your lock code. The

default lock code is 12345. To unlock, press the left

selection key, enter your lock code, and press the scroll

key.

To change the lock code, select Menu > Tools >

Settings > General > Security > Phone and SIM

card > Lock code. Enter the old code and then the

new code twice. The new code can be 4-255 characters

long. Both alphabets and digits can be used, and both

uppercase and lowercase alphabets are possible.

You can also lock the device remotely by sending a text

message to the device. To enable remote locking and

to define the text for the message, select Menu >

Tools > Settings > General > Security > Phone

and SIM card > Allow remote lock > Yes. Enter the

remote lock message and confirm the message. The

message must be at least 5 characters long.

Memory card security

Select Menu > Tools > Memory.

You can protect a memory card with a password to

prevent unauthorised access. To set a password, select

Options > Set password. The password can be up to

8 characters long and is case-sensitive. The password

is stored in your device. You do not need to enter it

again while you use the memory card on the same

device. If you use the memory card on another device,

you are asked for the password. Not all memory cards

support password protection.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To remove the memory card password, select

Options > Remove password. When you remove the

password, the data on the memory card is not

protected against unauthorised use.

To open a locked memory card, select Options >

Unlock memory card. Enter the password.

If you cannot recall the password to unlock a locked

memory card, you may reformat the card, in which case

the card is unlocked and password removed.

Formatting a memory card destroys all data stored on

the card.

Encryption

Select Menu > Tools > Encryption.

Encrypt your device or memory card to prevent

outsiders from accessing your important information.

Encrypt device memory or

memory card

To encrypt the device memory, select Phone

memory.

To encrypt the memory card, select Memory card and

from the following:

•Encrypt without saving key — Encrypt the

memory card without saving the encryption key. If

you select this option, you cannot use the memory

card in other devices, and if you restore factory

settings, you cannot decrypt the memory card.

•Encrypt and save key — Encrypt the memory card

and save the key manually in the default folder. For

security, store the key to a safe place outside the

device. For example, you can send the key to your

computer. Enter a pass phrase for the key and a

name for the key file. The pass phrase should be long

and complex.

•Encrypt with restored key — Encrypt the memory

card with a key you have received. Select the key file,

and enter the pass phrase.

Decrypt device memory or

memory card

To decrypt the device memory, select Phone

memory.

To decrypt the memory card without destroying the

encryption key, select Memory card > Decrypt.

To decrypt the memory card and destroy the

encryption key, select Memory card > Decrypt and

turn off encryption.

Fixed dialling

Select Menu > Communic. > Contacts > Options >

SIM contacts > Fixed dial contacts.

With the fixed dialling service, you can restrict calls

from your device to certain phone numbers. Not all SIM

cards support the fixed dialling service. Contact your

service provider for more information. 77

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

When fixed dialling is activated, calls may be possible

to the official emergency number programmed into

your device.

1. To restrict calls from your device, select Options >

New SIM contact and enter the contact name and

phone number to the list of numbers to which calls

are allowed, or select Add from Contacts to copy

the contact from Contacts. To restrict calls by a

country prefix, enter the country prefix in the list of

numbers. All phone numbers to which calls are

allowed must start with this country prefix.

2. Select Options > Activate fixed dialling. You

need your PIN2 code to activate and deactivate

fixed dialling or edit your fixed dialling contacts.

Contact your service provider if you do not have the

code. To cancel the service, select Options >

Deactivate fixed dialling.

Tip: To send text messages to the SIM contacts

while the fixed dialling service is active, you

need to add the text message centre number to

the fixed dialling list.

Certificate manager

Select Menu > Tools > Settings > General >

Security > Certificate management.

Digital certificates are used to verify the origins of

software but do not guarantee safety. There are four

different types of certificates: authority certificates,

personal certificates, trusted site certificates, and

device certificates. During a secure connection, a server

may send a server certificate to your device. Upon

receipt, it is checked through an authority certificate

stored in your device. You receive notification if the

identity of the server is not authentic or if you do not

have the correct certificate in your device.

Download a certificate from a web site, or receive a

certificate as an e-mail attachment, or as a message

sent through a Bluetooth or infrared connection.

Certificates should be used when you connect to an

online bank or a remote server to transfer confidential

information. They should also be used if you want to

reduce the risk of viruses or other malicious software,

and to check the authenticity of software when you

download and install software to your device.

Tip: When you add a new certificate, check its

authenticity.

View certificate details

You can only be sure of the correct identity of a server

when the signature and the validity period of a server

certificate have been checked.

To view certificate details, select View details.

One of the following notes may appear:

•Certificate not trusted — You have not set any

application to use the certificate. You may want to

change the trust settings.

•Expired certificate — The period of validity has

ended for the selected certificate.

•Certificate not valid yet — The period of validity

has not yet begun for the selected certificate.

•Certificate corrupted — The certificate cannot be

used. Contact the certificate issuer.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Certificate trust settings

Trusting a certificate means that you authorise it to

verify web pages, e-mail servers, software packages,

and other data. Only trusted certificates can be used to

verify services and software.

Important: Even if the use of certificates makes

the risks involved in remote connections and software

installation considerably smaller, they must be used

correctly in order to benefit from increased security.

The existence of a certificate does not offer any

protection by itself; the certificate manager must

contain correct, authentic, or trusted certificates for

increased security to be available. Certificates have a

restricted lifetime. If "Expired certificate" or "Certificate

not valid yet" is shown, even if the certificate should

be valid, check that the current date and time in your

device are correct.

Before changing any certificate settings, you must

make sure that you really trust the owner of the

certificate and that the certificate really belongs to the

listed owner.

To change the trust settings, select a certificate and

Options > Trust settings. Select an application field

and press the scroll key to select Yes or No. You cannot

change the trust settings of a personal certificate.

Depending on the certificate, a list of applications that

can use the certificate is displayed:

•Symbian installation — New Symbian operating

system application.

•Internet — E-mail and graphics.

•App. installation — New Java™ application.

•Online certif. check — Online certificate status

protocol.

Back up data

It is recommended to back up device memory regularly

to the memory card or a compatible computer.

To back up information from the device memory to a

memory card, select Menu > Tools > Memory >

Options > Back up phone memory.

To restore information from the memory card to the

device memory, select Menu > Tools > Memory >

Options > Restore from card.

You can also connect your device to a compatible

computer and use Nokia PC Suite to back up data.

Application manager

Select Menu > Installations > App. mgr..

You can install two types of applications and software

on your device:

•Applications and software specifically intended for

your device or compatible with the Symbian

operating system. These software installation files

have the extension .sis or .sisx.

•Java ME™ applications compatible with the Symbian

operating system. The Java application installation

file extensions are .jad or .jar. 79

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Installation files may be transferred to your device

from a compatible computer, downloaded during

browsing, or sent to you in a multimedia message, as

an e-mail attachment, or with Bluetooth.

During the installation, the device checks the integrity

of the package to be installed. The device shows

information about the checks being carried out, and

you are given options to continue or cancel the

installation.

If you install applications that require a network

connection, note that the power consumption of your

device may increase when you use these applications.

Tip: When browsing web pages, you can

download an installation file and install it

immediately. Note, however, that the

connection runs in the background during the

installation.

Install applications

Important: Only install and use applications and

other software from trusted sources, such as

applications that are Symbian Signed or have passed

the Java VerifiedTM testing.

To download and install software from the web, select

Download applications. Select the application and

Options > Install.

To view the details of an installed software package,

select the application and Options > View details.

To view the installation log, select Options > View

log. A list shows what software has been installed and

removed, and the date of the installation or removal.

If you encounter problems with the device after

installing a software package, use this list to find out

which software package may be the cause of the

problem. The information in this list may also help you

pinpoint problems that are caused by software

packages that are incompatible with each other.

To remove software, select Options > Remove. If you

remove software, you can only reinstall it by using the

original software package file, or by restoring a full

backup that contains the removed software package.

If you remove a software package, you may no longer

be able to open files created with that software. If

another software package depends on the software

package that you removed, the other software package

may stop working. Refer to the documentation of the

installed software package for details.

Data synchronisation

Select Menu > Tools > Sync.

With Sync, you can synchronise your contacts, calendar

entries, or notes with corresponding applications on a

compatible computer or remote internet server. Your

synchronisation settings are saved in a

synchronisation profile. The Sync application uses

SyncML technology for remote synchronisation. For

information on SyncML compatibility, contact the

supplier of the applications with which you want to

synchronise your device.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

You may receive the synchronisation settings as a

message from your service provider. The available

applications you can synchronise may vary. Contact

your service provider for more information.

Create a synchronisation

profile

There is a Nokia PC Suite synchronisation profile

available in your device. You do not need to edit it if

you synchronise your device with a computer using

Nokia PC Suite.

To create a new profile, select Options > New sync

profile and assign a name for the profile, select the

applications to synchronise with the profile, and

specify the needed connection settings. Contact your

service provider for details.

Mobile VPN

Select Menu > Tools > Settings > Connection >

VPN.

The Nokia mobile virtual private network (VPN) client

creates a secure connection to compatible corporate

intranet and services, such as e-mail. Your device

connects from a mobile network, through the internet,

to a corporate VPN gateway that acts as a front door to

the compatible corporate network. VPN client uses IP

Security (IPSec) technology. IPSec is a framework of

open standards for supporting secure exchange of data

over IP networks.

VPN policies define the method used by the VPN client

and a VPN gateway to authenticate each other, and the

encryption algorithms that they use to help protect the

confidentiality of data. Contact your company's IT

department for a VPN policy.

To install and configure the VPN client, certificates, and

policies, contact the IT administrator of your

organisation.

Manage VPN

Select VPN, and from the following:

•VPN policies — Install, view, and update VPN

policies.

•VPN policy servers — Edit the connection settings

of VPN policy servers from which you can install and

update VPN policies. A policy server refers to a Nokia

Security Service Manager (NSSM), which is not

necessarily required.

•VPN log — View the log for your VPN policy

installations, updates and synchronisations, and

other VPN connections.

Create VPN access points

Select Settings > Connection > Destinations.

An access point is where your phone connects to the

network by way of WLAN or packet data connection. To

use e-mail and multimedia services or to browse web

pages you must first define internet access points for

these services. VPN access points pair VPN policies with

regular internet access points to create secure

connections. 81

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Your service provider may preset some or all access

points for your device, and you may not be able to

create, edit, or remove them.

Contact your company's IT department for the correct

settings.

Open a destination, select a VPN access point, select

Edit, and define the following:

•Connection name — Enter a name for the VPN

access point.

•VPN policy — Select the VPN policy to combine with

the internet access point.

•Internet access point — Select the internet access

point with which to combine the VPN policy to

create secure connections for data transfer.

•Proxy server address — Enter the proxy server

address of the private network.

•Proxy port number — Enter the proxy port

number.

Use a VPN connection in an

application

You may have to prove your identity when you log on

to the enterprise network. Contact your company's IT

department for the credentials.

To use a VPN connection in an application, the

application must be associated with a VPN access point.

Tip: You can configure the application's

connection setting to Always ask, in which case

you select the VPN access point from a list of

connections when a connection is established.

1. In the application in which you want to create a VPN

connection, select a VPN access point as the access

point.

2. If you are using legacy authentication, enter your

VPN user name and passcode or password. If the

SecurID token has become out of synchronisation

with the clock of the ACE/Server, enter the next

passcode. If you are using certificate-based

authentication, you may have to enter the key store

password.

Barcode reader

Select Menu > Tools > Barcode.

Use the Barcode reader application to decode different

types of barcodes. The codes may contain information

such as URL links, e-mail addresses, and phone

numbers. The Barcode reader uses the camera in your

device to scan codes.

To scan a code, select Scan code, and set the code

between the red lines on the display. The decoded

information appears on the display.

To save the scanned data, select Options > Save. The

data is saved in .bcr format.

To view previously saved, decoded information in the

main view, select Saved data.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Settings

Select Menu > Tools > Settings.

You can define and modify various settings of your

device. Modifying these settings affects the operation

of your device across several applications.

Some settings may be preset for the device or sent to

you in a special message by your service provider. You

may not be able to change such settings.

Select the setting you want to edit to do the following:

•Switch between two values, such as on or off.

•Select a value from a list.

•Open a text editor to enter a value.

•Open a slider to decrease or increase the value by

scrolling left or right.

General settings

Select Menu > Tools > Settings > General.

Personalisation settings

Select Menu > Tools > Settings > General >

Personalisation.

Display settings

To define the level of light that the device needs before

switching on the backlight, select Display > Light

sensor.

To change the text size, select Display > Font size.

To adjust the length of time the display can be left idle

before the screen saver is activated, select Display >

Power saver time-out.

To select a welcome note or logo for the display, select

Display > Welcome note / logo. You can either

choose the default welcome note, enter your own text,

or select an image.

To set how quickly the display dims after the last

keypress, select Display > Light time-out.

Standby mode settings

To select whether to use the home screen, select

Standby mode > Home screen.

To change the home screen mode settings, select

Standby mode > Mode settings.

To assign shortcuts for the device keys, select Standby

mode > Shortcuts. These shortcuts are not available

in the home screen. 83

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To select whether to show or hide the operator logo,

select Standby mode > Operator logo > On or Off.

To select the mailbox that is shown in the home screen,

select Standby mode > Home screen mailbox.

Tone settings

To select a ringing tone for voice calls, select Tones >

Ringing tone.

To select a ringing tone for video calls, select Tones >

Video call tone.

To set the ringing type, select Tones > Ringing

type. You can also set the device to sound a ringing

tone that is a combination of the spoken name of the

caller and the selected ringing tone, when someone

from your contacts list calls you. Select Tones > Say

caller's name.

To set the volume level of the ringing tone, select

Tones > Ringing volume.

To set the various alert tones, select Tones > Message

alert tone, E-mail alert tone, Calendar alarm tone,

or Clock alarm tone.

To set the device to vibrate when you receive a call,

select Tones > Vibrating alert.

To set the volume level of the device keypad tones,

select Tones > Keypad tones.

To set the warning tones on or off, select Tones >

Warning tones.

Language settings

To set the language used on the device display, select

Language > Phone language.

To select the language in which you write notes and

messages, select Language > Writing language.

To select whether to use the predictive text input,

select Language > Predictive text.

To define the settings for the predictive text input,

select Input settings.

Notification light

When you receive a message or miss a call, the scroll

key starts blinking to indicate the event.

To set the length of time you want the scroll key to

blink, select Notification light > Blink light for.

To select of which events you want to be notified, select

Notification light > Notified events.

Settings for One-touch keys

Select Menu > Tools > Settings > General >

Personalisation > One-touch keys.

To select which application and task is opened when

you press a One-touch key, select the key and

Options > Open.

To restore the preset applications and tasks, select

Restore defaults.

Date and time settings

Select Menu > Tools > Settings > General > Date

and time.

To set the current date and time, select Date and

Time.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To define your time zone, select Time zone.

To update the time, date, and time zone information

automatically (network service), select Network

operator time > Auto-update.

To select whether to use the 12-hour or 24-hour clock

system and with which symbol to separate hours and

minutes, select Time format and Time separator.

To determine the date format and separator, select

Date format and Date separator.

To define the clock type, select Clock type >

Analogue or Digital.

To select the tone for the alarm clock, select Clock

alarm tone.

To determine the week days that are work days for you,

select Workdays.

Enhancement settings

Select Menu > Tools > Settings > General >

Enhancement.

Common enhancement settings

With most enhancements, you can do the following:

To determine which profile is activated when you

attach an enhancement to your device, select Default

profile.

To let the device answer phone calls automatically after

5 seconds when an enhancement is attached, select

Automatic answer > On. If the ringing type is set to

Beep once or Silent in the selected profile, the

automatic answer is disabled.

To illuminate the device while it is attached to an

enhancement, select Lights > On.

E-mail key settings

Select .

To select which mailbox to open with the e-mail key,

select E-mail key settings > E-mail key, and press

the scroll key.

Security settings

Select Menu > Tools > Settings > General >

Security.

Avoid using codes that are similar to emergency

numbers to prevent accidental dialling of the

emergency number. Codes are shown as asterisks.

When you change a code, enter the current code, then

the new code twice.

Device and SIM card security

To change the PIN code, select Phone and SIM card >

PIN code. The new code must be 4 to 8 digits long. The

PIN code protects your SIM card against unauthorised

use and is provided with the SIM card. After three

consecutive incorrect PIN code entries, the code is

blocked, and you need to use the PUK code to unblock

it before you can use the SIM card again.

To set the keypad to lock automatically after a defined

period, select Phone and SIM card > Keypad

autolock period.85

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To set a time-out after which the device is

automatically locked and can be used only if the correct

lock code is entered, select Phone and SIM card >

Phone autolock period. Enter a number for the time-

out in minutes, or select None to set off the autolock

period. When the device is locked, you can still answer

incoming calls, and calls may still be possible to the

official emergency number programmed into your

device.

To set a new lock code, select Phone and SIM card >

Lock code. The preset lock code is 12345. Enter the

current code and then the new code twice. The new

code can be 4-255 characters long. Both alphabets and

digits can be used, and both uppercase and lowercase

alphabets are possible. The device notifies you if the

lock code is not properly formatted.

To set the device to ask for the lock code when an

unknown, new SIM card is inserted into your device,

select Phone and SIM card > Lock if SIM card

changed. The device maintains a list of SIM cards that

are recognised as the owners cards.

Restore original settings

To restore the original device settings, select Factory

settings. To do this, you need your device lock code.

After resetting, the device may take a longer time to

power on. Documents, contact information, calendar

entries, and files are unaffected.

Telephone settings

Select Menu > Tools > Settings > Phone.

Call settings

To display your phone number to the person you are

calling, select Call > Send my caller ID > Yes. To let

the network determine whether your caller ID is sent,

select Set by network.

To display your net call address to the person you are

calling using a net call, select Call > Send my internet

call ID > Yes.

To be notified of a new incoming call while you have a

call in progress, select Call > Call waiting >

Options > Activate. To check if the function is active

on the network, select Options > Check status.

To select whether net calls alert or not, select Call >

Internet call alert. You are notified of missed net calls

with a notification.

To set the default call type, select Call > Default call

type and select Voice call if you make a GSM calls, or

Internet call if you make net calls.

To send a text message automatically to the person

who is calling you informing why you cannot answer

the incoming call, select Call > Reject call with

SMS > Yes. To set the text for the message, select

Call > Message text.

To set off the contact search on the home screen, select

Call > Contact search > Off.

Network settings

Select Menu > Tools > Settings > Phone >

Network.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To select the network mode, select Network mode

and Dual mode, UMTS, or GSM. In the dual mode, the

device switches automatically between networks.

Tip: UMTS enables faster data transfer, but may

increase the demand on battery power and

reduce the battery life. In regions close to both

GSM and UMTS networks, selecting Dual mode

may cause constant jumping between the two

networks, which also increases the demand on

battery power.

To select the operator, select Operator selection and

Manual to choose from available networks, or

Automatic to have the device select the network

automatically.

To set the device to indicate when it is used in Micro

Cellular Network (MCN), select Cell info display >

On.

Connection settings

Select Menu > Tools > Settings > Connection.

Access points

Select Menu > Tools > Settings > Connection >

Access points.

An internet access point is a collection of settings,

which define how the device creates a data connection

to the network. To use e-mail and multimedia services

or to browse web pages, you must first define access

points for these services.

Some or all access points may be preset for your device

by your service provider, and you may not be able to

create, edit, or remove them.

To create a new access point, select Options > New

access point or select an existing access point from the

list and then Options > Duplicate access point to use

the access point as a basis for the new one.

Packet data (GPRS) settings

Select Menu > Tools > Settings > Connection >

Packet data.

Your device supports packet data connections, such as

GPRS in the GSM network. When you are using your

device in GSM and UMTS networks, it is possible to have

multiple data connections active at the same time;

access points can share a data connection, and data

connections remain active, for example, during voice

calls. See "Connection manager", p. 74.

To define the packet data settings, select Packet data

connection and select When available to register the

device to the packet data network when you switch the

device on in a supported network, or When needed to

establish a packet data connection only when an

application or action requires it. Select Access point

and enter the access point name provided by your

service provider to use the device as a packet data

modem to your computer. To use a high-speed data

connection, select High speed packet access >

Enabled.

These settings affect all access points for packet data

connections. 87

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

WLAN settings

Select Menu > Tools > Settings > Connection >

Wireless LAN.

To have an indicator displayed when there is a WLAN

available in your current location, select Show WLAN

availability > Yes.

To select the interval for your device to scan for

available WLANs and update the indicator, select Scan

for networks. This setting is not available unless you

select Show WLAN availability > Yes.

WLAN security settings

Select Menu > Tools > Settings > Connection >

Access points > Options > New access point, or

select an access point and Options > Edit.

In the access point settings, select WLAN security

mode and the desired mode.

Session initiation protocol

(SIP) settings

Select Menu > Tools > Settings > Connection >

SIP settings.

Session initiation protocols (SIP) are used for creating,

modifying, and terminating certain types of

communication sessions with one or more participants

(network service). Typical communication sessions are

video sharing and net calls. SIP profiles include settings

for these sessions. The SIP profile used by default for a

communication session is underlined.

To create a SIP profile, select Options > New SIP

profile > Use default profile or Use existing

profile.

To select the SIP profile you want to use by default for

communication sessions, select Options > Default

profile.

Edit SIP profiles

Select Options > Edit, and select from the following:

•Profile name — Enter a name for the SIP profile.

•Service profile — Select IETF or Nokia 3GPP.

•Default access point — Select the access point to

use for the internet connection.

•Public user name — Enter your user name received

from your service provider.

•Use compression — Select if compression is used.

•Registration — Select the registration mode.

•Use security — Select if security negotiation is

used.

•Proxy server — Enter the proxy server settings for

this SIP profile.

•Registrar server — Enter the registration server

settings for this SIP profile.

Net call settings

Select Menu > Tools > Settings > Connection >

Internet tel..

To create a new net call profile, select Options > New

profile.

To edit an existing profile, select Options > Edit.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Configuration settings

Select Menu > Tools > Settings > Connection >

Configurations.

You can receive messages from your service provider

or company information management containing

configuration settings for trusted servers. These

settings are automatically saved in Configurations.

You may receive configuration settings for access

points, multimedia, or e-mail services, and IM or

synchronisation settings from trusted servers.

To delete configurations for a trusted server, select

Options > Delete. The configuration settings for

other applications provided by this server are also

deleted.

Restrict packet data

Select Menu > Tools > Settings > Connection >

APN control.

With the access point control service, you can restrict

packet data connections from your device to certain

access points only. Your SIM card may not support the

access point control service. Contact your service

provider for more information.

To restrict the packet data connections from your

device, select Options > Activate restrictions. You

need your PIN2 code to activate and deactivate access

point control or to edit the packet data access points

on the control list.

To add access points that can be used for packet data

connections to the control list, select Options > Add

name manually. To enable connections to an

operator-provided access point, create an empty

access point.

To remove access points from the list, select Options >

Remove.

Application settings

Select Menu > Tools > Settings > Applications.

Select an application from the list to adjust its settings.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Shortcuts

Here are some of the available keyboard shortcuts in

your device. Shortcuts can make the use of the

applications more efficient.

General shortcuts

Power key Press and hold to switch your device

on and off.

Press once to switch between

profiles.

Home screen

Left selection

key + function

key

Lock and unlock the keypad.

Call key Open the call log.

0Press and hold to open your home

page in the Web browser.

1Press and hold to call your voice

mailbox.

Number key (2–

Call a phone number using speed

dialling. You must first activate

speed dialling at Menu > Tools >

Settings > Phone > Call >

Speed dialling > On.

Web

*Zoom in the page.

#Zoom out the page.

2Open the search dialog.

5View the active pages.

8View the page overview.

9Open the dialog for entering a new

web address.

0Open the bookmarks folder.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Enhancements

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this

particular model. The use of any other types may

invalidate any approval or warranty, and may be

dangerous.

For availability of approved enhancements, please

check with your dealer. When you disconnect the

power cord of any enhancement, grasp and pull the

plug, not the cord.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Battery and charger information

Battery and charger

information

Your device is powered by a rechargeable battery. The

battery intended for use with this device is BP-4L. This

device is intended for use when supplied with power

from the following chargers: AC-5 . The battery can be

charged and discharged hundreds of times, but it will

eventually wear out. When the talk and standby times

are noticeably shorter than normal, replace the

battery. Use only Nokia approved batteries, and

recharge your battery only with Nokia approved

chargers designated for this device. Use of an

unapproved battery or charger may present a risk of

fire, explosion, leakage, or other hazard.

If a battery is being used for the first time or if the

battery has not been used for a prolonged period, it

may be necessary to connect the charger, then

disconnect and reconnect it to begin charging the

battery. If the battery is completely discharged, it may

take several minutes before the charging indicator

appears on the display or before any calls can be made.

Always switch the device off and disconnect the

charger before removing the battery.

Unplug the charger from the electrical plug and the

device when not in use. Do not leave a fully charged

battery connected to a charger, since overcharging

may shorten its lifetime. If left unused, a fully charged

battery will lose its charge over time.

Always try to keep the battery between 15°C and 25°C

(59°F and 77°F). Extreme temperatures reduce the

capacity and lifetime of the battery. A device with a hot

or cold battery may not work temporarily. Battery

performance is particularly limited in temperatures

well below freezing.

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object such as a

coin, clip, or pen causes direct connection of the

positive (+) and negative (-) terminals of the battery.

(These look like metal strips on the battery.) This might

happen, for example, when you carry a spare battery

in your pocket or purse. Short-circuiting the terminals

may damage the battery or the connecting object. .

Do not dispose of batteries in a fire as they may

explode. Batteries may also explode if damaged.

Dispose of batteries according to local regulations.

Please recycle when possible. Do not dispose as

household waste.

Do not dismantle, cut, open, crush, bend, deform,

puncture, or shred cells or batteries. In the event of a

battery leak, do not allow the liquid to come in contact

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

with the skin or eyes. In the event of such a leak, flush

your skin or eyes immediately with water, or seek

medical help.

Do not modify, remanufacture, attempt to insert

foreign objects into the battery, or immerse or expose

it to water or other liquids.

Improper battery use may result in a fire, explosion, or

other hazard. If the device or battery is dropped,

especially on a hard surface, and you believe the

battery has been damaged, take it to a service centre

for inspection before continuing to use it.

Use the battery only for its intended purpose. Never use

any charger or battery that is damaged. Keep your

battery out of the reach of small children.

Nokia battery

authentication

guidelines

Always use original Nokia batteries for your safety. To

check that you are getting an original Nokia battery,

purchase it from an authorised Nokia dealer, and

inspect the hologram label using the following steps:

Successful completion of the steps is not a total

assurance of the authenticity of the battery. If you have

any reason to believe that your battery is not an

authentic, original Nokia battery, you should refrain

from using it, and take it to the nearest authorised

Nokia service point or dealer for assistance. Your

authorised Nokia service point or dealer will inspect

the battery for authenticity. If authenticity cannot be

verified, return the battery to the place of purchase.

Authenticate hologram

1. When you look at the

hologram on the label, you

should see the Nokia

connecting hands symbol

from one angle and the Nokia

Original Enhancements logo

when looking from another

angle.

2. When you angle the hologram

left, right, down and up, you

should see 1, 2, 3 and 4 dots on

each side respectively.

What if your battery is not

authentic?

If you cannot confirm that your Nokia battery with the

hologram on the label is an authentic Nokia battery,

please do not use the battery. Take it to the nearest

authorised Nokia service point or dealer for assistance.

The use of a battery that is not approved by the

manufacturer may be dangerous and may result in

poor performance and damage to your device and its

enhancements. It may also invalidate any approval or

warranty applying to the device.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

To find out more about original Nokia batteries, visit

www.nokia.com/battery.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Care and maintenance

Your device is a product of superior design and

craftsmanship and should be treated with care. The

following suggestions will help you protect your

warranty coverage.

•Keep the device dry. Precipitation, humidity, and all

types of liquids or moisture can contain minerals

that will corrode electronic circuits. If your device

does get wet, remove the battery, and allow the

device to dry completely before replacing it.

•Do not use or store the device in dusty, dirty areas.

Its moving parts and electronic components can be

damaged.

•Do not store the device in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•Do not store the device in cold areas. When the

device returns to its normal temperature, moisture

can form inside the device and damage electronic

circuit boards.

•Do not attempt to open the device other than as

instructed in this guide.

•Do not drop, knock, or shake the device. Rough

handling can break internal circuit boards and fine

mechanics.

•Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the device.

•Do not paint the device. Paint can clog the moving

parts and prevent proper operation.

•Use a soft, clean, dry cloth to clean any lenses, such

as camera, proximity sensor, and light sensor lenses.

•Use only the supplied or an approved replacement

antenna. Unauthorised antennas, modifications, or

attachments could damage the device and may

violate regulations governing radio devices.

•Use chargers indoors.

•Always create a backup of data you want to keep,

such as contacts and calendar notes.

•To reset the device from time to time for optimum

performance, power off the device and remove the

battery.

These suggestions apply equally to your device,

battery, charger, or any enhancement. If any device is

not working properly, take it to the nearest authorised

service facility for service.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Disposal

The crossed-out wheeled-bin symbol on your

product, literature, or packaging reminds you

that all electrical and electronic products,

batteries, and accumulators must be taken to

separate collection at the end of their working life. This

requirement applies to the European Union and other

locations where separate collection systems are

available. Do not dispose of these products as unsorted

municipal waste.

By returning the products to collection you help

prevent uncontrolled waste disposal and promote the

reuse of material resources. More detailed information

is available from the product retailer, local waste

authorities, national producer responsibility

organizations, or your local Nokia representative. For

the product Eco-Declaration or instructions for

returning your obsolete product, go to country-specific

information at www.nokia.com.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Additional safety information

Small children

Your device and its enhancements may contain small

parts. Keep them out of the reach of small children.

Operating

environment

This device meets RF exposure guidelines when used

either in the normal use position against the ear or

when positioned at least 2.2 centimetres (7/8 inch)

away from the body. When a carry case, belt clip, or

holder is used for body-worn operation, it should not

contain metal and should position the device the

above-stated distance from your body.

To transmit data files or messages, this device requires

a quality connection to the network. In some cases,

transmission of data files or messages may be delayed

until such a connection is available. Ensure the above

separation distance instructions are followed until the

transmission is completed.

Parts of the device are magnetic. Metallic materials

may be attracted to the device. Do not place credit

cards or other magnetic storage media near the device,

because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment,

including wireless phones, may interfere with the

functionality of inadequately protected medical

devices. Consult a physician or the manufacturer of the

medical device to determine if they are adequately

shielded from external RF energy or if you have any

questions. Switch off your device in health care

facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities

may be using equipment that could be sensitive to

external RF energy.

Implanted medical devices

Manufacturers of medical devices recommend that a

minimum separation of 15.3 centimetres (6 inch)

should be maintained between a wireless device and

an implanted medical device, such as a pacemaker or

implanted cardioverter defibrillator, to avoid potential

interference with the medical device. Persons who

have such devices should:

•Always keep the wireless device more than 15.3

centimetres (6 inch) from the medical device when

the wireless device is turned on. 97

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

•Not carry the wireless device in a breast pocket.

•Hold the wireless device to the ear opposite the

medical device to minimise the potential for

interference.

•Turn the wireless device off immediately if there is

any reason to suspect that interference is taking

place.

•Read and follow the directions from the

manufacturer of their implanted medical device.

If you have any questions about using your wireless

device with an implanted medical device, consult your

health care provider.

Hearing aids

Some digital wireless devices may interfere with some

hearing aids. If interference occurs, consult your

service provider.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles such as electronic fuel injection systems,

electronic antiskid (antilock) braking systems,

electronic speed control systems, and air bag systems.

For more information, check with the manufacturer, or

its representative, of your vehicle or any equipment

that has been added.

Only qualified personnel should service the device or

install the device in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty that may apply to the device. Check regularly

that all wireless device equipment in your vehicle is

mounted and operating properly. Do not store or carry

flammable liquids, gases, or explosive materials in the

same compartment as the device, its parts, or

enhancements. For vehicles equipped with an air bag,

remember that air bags inflate with great force. Do not

place objects, including installed or portable wireless

equipment in the area over the air bag or in the air bag

deployment area. If in-vehicle wireless equipment is

improperly installed and the air bag inflates, serious

injury could result.

Using your device while flying in aircraft is prohibited.

Switch off your device before boarding an aircraft. The

use of wireless teledevices in an aircraft may be

dangerous to the operation of the aircraft, disrupt the

wireless telephone network, and may be illegal.

Potentially explosive

environments

Switch off your device when in any area with a

potentially explosive atmosphere, and obey all signs

and instructions. Potentially explosive atmospheres

include areas where you would normally be advised to

turn off your vehicle engine. Sparks in such areas could

cause an explosion or fire resulting in bodily injury or

even death. Switch off the device at refuelling points

such as near gas pumps at service stations. Observe

restrictions on the use of radio equipment in fuel

depots, storage, and distribution areas; chemical

plants; or where blasting operations are in progress.

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Areas with a potentially explosive atmosphere are

often, but not always, clearly marked. They include

below deck on boats, chemical transfer or storage

facilities and areas where the air contains chemicals or

particles such as grain, dust, or metal powders. You

should check with the manufacturers of vehicles using

liquefied petroleum gas (such as propane or butane) to

determine if this device can be safely used in their

vicinity.

Emergency calls

Important: This device operates using radio

signals, wireless networks, landline networks, and

user-programmed functions. If your device supports

voice calls over the internet (internet calls), activate

both the internet calls and the cellular phone. The

device will attempt to make emergency calls over both

the cellular networks and through your internet call

provider if both are activated. Connections in all

conditions cannot be guaranteed. You should never

rely solely on any wireless device for essential

communications like medical emergencies.

To make an emergency call:

1. If the device is not on, switch it on. Check for

adequate signal strength. Depending on your

device, you may also need to complete the

following:

•Insert a SIM card if your device uses one

•Remove certain call restrictions you have

activated in your device.

•Change your profile from offline or flight profile

mode to an active profile.

2. Press the end key as many times as needed to clear

the display and ready the device for calls.

3. Enter the official emergency number for your

present location. Emergency numbers vary by

location.

4. Press the call key.

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless

device may be the only means of communication at the

scene of an accident. Do not end the call until given

permission to do so.

CERTIFICATION

INFORMATION (SAR)

This mobile device meets guidelines for exposure

to radio waves.

Your mobile device is a radio transmitter and receiver.

It is designed not to exceed the limits for exposure to

radio waves recommended by international

guidelines. These guidelines were developed by the

independent scientific organisation ICNIRP and include

safety margins designed to assure the protection of all

persons, regardless of age and health.

The exposure guidelines for mobile devices employ a

unit of measurement known as the Specific Absorption

Rate or SAR. The SAR limit stated in the ICNIRP

guidelines is 2.0 watts/kilogram (W/kg) averaged over

10 grams of tissue. Tests for SAR are conducted using

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

standard operating positions with the device

transmitting at its highest certified power level in all

tested frequency bands. The actual SAR level of an

operating device can be below the maximum value

because the device is designed to use only the power

required to reach the network. That amount changes

depending on a number of factors such as how close

you are to a network base station. The highest SAR

value under the ICNIRP guidelines for use of the device

at the ear is 1.33 W/kg.

Use of device accessories and enhancements may

result in different SAR values. SAR values may vary

depending on national reporting and testing

requirements and the network band. Additional SAR

information may be provided under product

information at www.nokia.com.

Your mobile device is also designed to meet the

requirements for exposure to radio waves established

by the Federal Communications Commission (USA) and

Industry Canada. These requirements set a SAR limit of

1.6 W/kg averaged over one gram of tissue. The highest

SAR value reported under this standard during product

certification for use at the ear is 1.23 W/kg and when

properly worn on the body is 0.53 W/kg.

100

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Index

access points

creating 87

VPN 81

Active notes 55

alarm clock 58

alert tones 84

altitude calibration 54

animated screen saver 68

antennas 14

application settings 89

applications

common actions 19

installing 80

attachments

e-mail 38

autolock period 85

background image 68

backing up data 79

barcodes 82

battery

charge level 17

charging 13

inserting 12

Bluetooth

authorising devices 71

pairing 71

passcode 71

receiving data 70

security 72

sending data 70

bookmarks 46

browsing

intranet 46

offline 46

web 45

cable 69

cache

emptying 46

Calculator 55

Calendar

settings 26

calendar entries

creating 26

viewing 25

calendar key 25

calendar views

changing 25

caller ID 86

calls

answering 29

call waiting 86

caller ID 86

conference call 30

fixed dialling 77

making 29

making a net call 33

muting the ringing tone 29

net call alert 86

rejecting 29

rejecting with text

message 86

selecting type 86

settings 86

speed dialling 33

voice commands 34

voice dialling 34

voice mail 33

camera

capturing images 60

toolbar 60

video clips 61

certificates

details 78

settings 79

charging the battery 13

Clock

alarms 58

settings 58

conference calls 30

configuration messages 89

connection methods

Bluetooth 70

data cable 69

modem 74

connections

ending 74

101

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

GPRS settings 47

PC connection 49

WLAN settings 48

connectors 10

contact groups

adding ringing tones 27

creating 27

making conference calls 27

contacts

adding 27

adding ringing tones 27

searching 27

settings 28

contacts directories

managing 27

contacts key 24

converting

currencies 57

measurements 57

currency conversions 57

date

settings 84

decrypting

device memory and memory

card 77

destination

removing 54

setting 54

display

changing the look 68

indicators 17

settings 83

Download!

managing items 47

e-mail

automatic retrieval

settings 44

connecting to mailbox 38

connection settings 43

creating folders 39

deleting 39

replying 38

retrieval settings 43

sending 39

setting up 37

user settings 43

writing 39

e-mail key 25

e-mail key settings 85

encrypting

device memory and memory

card 77

ending

internet connections 46

network connections 74

enhancements

settings 85

File manager 56

files

downloading 64

flash files 65

sending 56

fixed dialling 77

Flash player 65

free memory 20

Gallery 64

GPRS

access point settings 47

settings 87

headset

connecting 14

home key 24

home screen 23

settings 68, 83

switching 24

HSDPA (high-speed downlink

packet access) 69

IM 41

images

rotating 64

sharing online 63

zooming 64

indicators 17

inserting

battery 12

memory card 13

SIM card 12

installation log 80

installing

applications 80

102

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Instant messaging 41

internet 45

ending connections 46

internet calls 33

intranet

browsing 46

jad files 80

jar files 80

Java applications 80

keyguard 19

keypad

lock settings 85

locking 19

tones 84

keys 10

shortcuts 83

landmarks

creating 54

language

settings 84

lock code 76, 85

locking

device 76

device autolock 85

keypad 19, 85

Log 35

adding numbers to

Contacts 35

deleting 35

logos

operator logo 83

welcome logo 83

mailboxes

connecting 38

creating 37

making a call 29

Maps 51, 52

browsing 52

finding locations 53

indicators 52

routes 53

measurements

converting 57

measuring system

changing 54

memory 20

memory card

backing up data 79

ejecting 14

formatting 21

inserting 13

locking 76

microSD 20

passwords 76

setting password 21, 56

unlocking 21

menu 16

messages 36

call rejection messages 86

configuration messages 89

other settings 44

text message settings 41

Messaging

folders 36

microSDHC 20

modem 49, 74

multimedia messages

creating 40

sending 40

settings 42

multitasking 28

Music player

Music Store 63

playing 62

playlists 62

transferring music 63

Music Store 63

net calls

alert settings 86

connecting 32

making a call 33

profiles 32, 88

settings 88

network

settings 86

Notes 59

notification light 84

One-touch keys 84

operator

logo 83

selecting 86 103

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

original settings 86

packet data

access point settings 47

restricting 89

settings 87

pairing

devices 71

passcode 71

passwords

memory card password 21,

PDF reader 57

personalisation 68

changing language 84

display 83

home screen 83

tones 84

PIN code

changing 85

playing

video and audio 65

podcasting 61

searching 61

positioning

settings 51

predictive text input 22, 84

printing 57

profiles

creating 67

customising 67

net call profile 32, 88

selecting ringing tones 67

PTT 35

push to talk 35

Quickoffice 56

radio

listening to 65

viewing visual content 66

RealPlayer

playing media clips 65

recorder 63

remote lock 76

remote synchronisation 81

restoring original settings 86

ringing tones 84

contacts and contact

groups 27

in profiles 67

vibrating alert 84

satellite signal strength 54

saving

current position 54

files 19

settings 19

screen saver 68, 83

search modes

switching 27

searching

available WLANs 74

security

Bluetooth 72

device and SIM card 85

memory card 76

sending

files 19, 56

using Bluetooth 70

videos 31

session initiation protocol

See

SIP

settings

applications 89

Calendar 26

calls 86

certificate 79

clock 58

contacts 28

date 84

display 83

e-mail connection 43

e-mail key 85

e-mail retrieval 44

e-mail user 43

enhancements 85

GPRS 47, 87

home screen 83

keypad lock 85

language 84

multimedia messages 42

net call 88

network 86

packet data 87

positioning 51

restoring 86

SIP 88

text messages 41

time 84

104

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

tones 84

Web 46

WLAN 88

WLAN access point 48

WLAN security 88

shortcuts 90

keys 83

signal strength 17

SIM card

inserting 12

SIM change lock 85

SIP

creating profiles 88

editing profiles 88

settings 88

sis files 80

sisx files 80

software packages

installing 80

sound clips 63

speed dialling 33

standby mode

settings 83

switching device on and off 15

Symbian applications 80

synchronisation

synchronisation profiles 81

tabs 19

text

changing size 83

predictive input 22

writing 21

text messages

sending 40

settings 41

writing 40

themes

changing 68

time

settings 84

tones 84

settings 84

toolbar

camera 60

transferring data 17

trip destination 54

trip meter 54

UPIN code

changing 85

USB data cable 69

vibrating alert 84

video calls

making a call 30

switching to voice call 30

video clips

playing 65

video sharing 31

receiving invitations 31

virtual private network

access points 81

use in applications 82

Voice aid 33

voice mail

calling 33

changing number 33

volume 20

VPN

access points 81

use in applications 82

warning tones 84

Web

connection security 45

settings 46

welcome note 83

WLAN

access point settings 48

access points 73

availability 73

MAC address 72, 88

searching for networks 74

security settings 88

settings 88

WLAN wizard 73

writing 21

Zip manager 57

105

Cyan

Magenta

Yellow

Black

Cyan

Magenta

Yellow

Black

Microsoft RM-346 GSM/WCDMA cellular phone w/BT andWLAN User Manual Manual

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT andWLAN Manual

Manual

Navigation menu

Namespaces

Views

Navigation