Microsoft RM-357 GSM/WCDMA cellular phone w/BT andWLAN User Manual

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT andWLAN

Manual

Download: Microsoft RM-357 GSM/WCDMA cellular phone w/BT andWLAN User Manual
Mirror Download [FCC.gov]Microsoft RM-357 GSM/WCDMA cellular phone w/BT andWLAN User Manual
Document ID925102
Application IDHhL1kBdMAhgiWLch6+zHGw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize81.51kB (1018824 bits)
Date Submitted2008-04-08 00:00:00
Date Available2008-06-16 00:00:00
Creation Date2008-03-25 13:44:41
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2008-03-25 13:46:46
Document Titleuntitled
Document Author: mode

E71 User Guide
6666666
Issue 1
Cyan Magenta Yellow Black
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-357 product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at
www.nokia.com/phones/declaration_of_conformity/.
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia Original Enhancements logos, Eseries, E71, and Visual Radio are trademarks or registered trademarks of Nokia
Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames
of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved.
This product includes software licensed from Symbian Software Ltd © 1998-2008. Symbian and Symbian OS are trademarks of Symbian
Ltd.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
Portions of the Nokia Maps software are © 1996-2008 The FreeType Project. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
Cyan Magenta Yellow Black
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains
any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,
damages and liabilities of Nokia's licensors.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
6666666/Issue 1
Cyan Magenta Yellow Black
Contents
Safety...........................................................7
New from Eseries.......................................23
About your device...........................................................7
Network services.............................................................8
Battery removing............................................................8
Access tasks quickly......................................................23
Home screen..................................................................23
One-touch keys..............................................................24
Nokia Calendar for Eseries............................................25
Nokia Contacts for Eseries............................................26
Multitasking...................................................................28
E71 in brief...................................................9
Key features.....................................................................9
Keys and parts...............................................................10
Phone.........................................................29
Set up your device......................................12
Insert the SIM card and battery...................................12
Charge the battery........................................................13
Insert the memory card................................................13
Eject the memory card..................................................14
Connect the headset.....................................................14
Attach the wrist strap...................................................14
Antennas........................................................................14
Voice calls.......................................................................29
Video calls......................................................................30
Net calls..........................................................................31
1-touch dialing..............................................................33
Voice mail......................................................................33
Voice aid.........................................................................33
Voice commands...........................................................34
Push to talk....................................................................35
Log..................................................................................35
Get started.................................................15
First start-up..................................................................15
Home screen..................................................................15
Menu...............................................................................16
Transfer..........................................................................16
Display indicators..........................................................17
Common actions in several applications....................19
Lock the keys.................................................................19
Volume control..............................................................20
Memory..........................................................................20
Write text.......................................................................21
Further information......................................................22
Messaging..................................................36
Messaging folders.........................................................36
E-mail messages............................................................37
Write and send text messages....................................40
Multimedia messages...................................................40
Instant messaging........................................................41
Messaging settings.......................................................41
Internet......................................................45
Web................................................................................45
Browse the intranet .....................................................46
Cyan Magenta Yellow Black
Download!......................................................................47
Internet access points..................................................47
Connect PC to web.........................................................49
Travelling...................................................50
About GPS and satellite signals...................................50
Positioning settings......................................................51
Maps...............................................................................51
GPS data.........................................................................53
Landmarks.....................................................................54
Nokia Office Tools......................................55
Active notes...................................................................55
Calculator.......................................................................55
File manager..................................................................56
Quickoffice.....................................................................56
Converter........................................................................56
Zip manager...................................................................57
PDF reader......................................................................57
Printing .........................................................................57
Clock...............................................................................58
Notes..............................................................................59
Media..........................................................60
Camera...........................................................................60
Nokia Podcasting..........................................................61
Music player...................................................................62
Share online...................................................................63
Recorder.........................................................................63
Gallery............................................................................64
RealPlayer......................................................................64
Flash player....................................................................65
Radio..............................................................................65
Personalisation..........................................67
Profiles...........................................................................67
Select ringing tones......................................................67
Personalise the home screen.......................................68
Change the display theme............................................68
Connectivity...............................................69
Fast downloading.........................................................69
Data cable......................................................................69
Bluetooth.......................................................................70
Wireless LAN..................................................................72
Modem...........................................................................74
Connection manager....................................................74
Security and data management................76
Lock the device..............................................................76
Memory card security...................................................76
Encryption......................................................................77
Fixed dialling.................................................................77
Certificate manager......................................................78
Back up data..................................................................79
Application manager....................................................79
Data synchronisation....................................................80
Mobile VPN.....................................................................81
Barcode reader..............................................................82
Settings......................................................83
General settings............................................................83
Telephone settings.......................................................86
Connection settings......................................................87
Application settings......................................................89
Shortcuts....................................................90
General shortcuts..........................................................90
Cyan Magenta Yellow Black
Enhancements............................................91
Battery and charger information...............92
Battery and charger information................................92
Nokia battery authentication guidelines...................93
Care and maintenance...............................95
Disposal..........................................................................96
Additional safety information...................97
Small children................................................................97
Operating environment................................................97
Medical devices..............................................................97
Vehicles..........................................................................98
Potentially explosive environments............................98
Emergency calls.............................................................99
CERTIFICATION INFORMATION (SAR).............................99
Index........................................................101
Cyan Magenta Yellow Black
Safety
Read these simple guidelines. Not following them may
be dangerous or illegal. Read the complete user guide
for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off
in aircraft, near medical equipment, fuel,
chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or
repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800, and 1900
networks, and UMTS 850/1900 HSDPA networks.
Contact your service provider for more information
about networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Copyright protection may prevent some images, music,
and other content from being copied, modified, or
transferred.
Your device supports several methods of connectivity.
Like computers, your device may be exposed to viruses
and other harmful content. Exercise caution with
messages, connectivity requests, browsing, and
downloads. Only install and use services and other
software from trustworthy sources that offer adequate
security and protection against harmful software, such
as applications that are Symbian Signed or have passed
the Java Verified™ testing. Consider installing antivirus
Cyan Magenta Yellow Black
and other security software on your device and any
connected computer.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
Remember to make back-up copies or keep a written
record of all important information stored in your
device.
When connecting to any other device, read its user
guide for detailed safety instructions. Do not connect
incompatible products.
before you can use the network services. Your service
provider can give you instructions and explain what
charges will apply. Some networks may have
limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as e-mail, browsing, and multimedia
messaging (MMS), require network support for these
technologies.
Battery removing
Always switch the device off and disconnect the
charger before removing the battery.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
all networks; other networks may require that you
make specific arrangements with your service provider
Cyan Magenta Yellow Black
E71 in brief
Model number: Nokia E71-2 (RM-357).
Hereinafter referred to as Nokia E71.
Work with documents, spreadsheets, and
presentations with Quickoffice.
Key features
Add new business applications to your
Eseries device with Download!.
Your new Eseries device helps you manage your
business and personal information. Some of the key
features are highlighted here:
Find points of interest with Maps.
Read and reply to your e-mail while on the
move.
Stay up-to-date and plan your meetings with
Calendar.
Manage your business partners and free time
friends with the new Contacts application.
Make calls using voice over IP services with
Internet tel..
Connect to WLAN with WLAN wiz..
Switch from business to personal mode to
balance your business and personal life.
Edit the appearance and setup of your home
screen with Modes.
Browse your company intranet with
Intranet.
Move your contact and calendar information
from a previous device to your E71 with
Switch.
When you see this icon in the home screen,
Contacts, or Calendar, scroll right to access a
list of available actions.
Cyan Magenta Yellow Black
Keys and parts
11 — End key. Press the end key to reject a call, end
active calls and held calls, and with a long keypress, end
data connections.
12 — Backspace key
13 — Enter key
1 — Home key
2 — Contacts key
3 — Calendar key
4 — E-mail key
10
1 — Earpiece
2 — Light sensor
3 — Navi™ scroll key. Press the scroll key to enter a
selection, to scroll left, right, up, and down on the
display. A long press of the scroll key left, right, up, or
down accelerates the scrolling.
4 — Selection key. Press the selection key to perform
the function shown above it on the display.
5 — Call key
6 — Microphone
7 — Charger connector
8 — Power key
9 — Camera (video calls only)
10 — Selection key
1 — Function key. To insert digits or characters printed
at the top of keys, press and hold the function key and
press the corresponding key, or press and hold the
corresponding key only. To enter only the characters
printed at the top of keys, press the function key twice
quickly.
2 — Shift key. To switch between the different
character cases, press the shift key.
3 — Chr key. When writing text, press the chr key to
insert characters not shown on the keypad. To access
the shortcuts behind the ctrl key, such as ctrl + c, press
Cyan Magenta Yellow Black
the function key and the chr key to enter ctrl, and then
press the desired key, for example c.
11
Cyan Magenta Yellow Black
Set up your device
Set up your E71 following these instructions.
Insert the SIM card and
battery
1. Press the release buttons and lift the back cover off.
3. Insert the SIM card. Make sure that the contact area
on the card is facing the connectors on the device
and that the bevelled corner is facing the top of the
device.
2. If the battery is inserted, lift the battery in the
direction of the arrow to remove it.
4. Insert the battery. Align the contacts of the battery
with the corresponding connectors on the battery
compartment and insert in the direction of the
arrow.
12
Cyan Magenta Yellow Black
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
Your battery has been precharged at the factory, but
the charging levels may vary. To reach the full
operation time, charge the battery until it has been
fully charged according to the battery level indicator.
Tip: If you have old compatible Nokia chargers,
you can use them with the Nokia E71 by
attaching the CA-44 charger adapter to the old
charger. The adapter is available as a separate
enhancement.
5. Close the back cover.
Insert the memory
card
Charge the battery
1. Connect a compatible charger to a wall outlet.
2. Connect the power cord to the device. If the battery
is completely discharged, it may take a while before
the charging indicator starts scrolling.
The sales package of your device may not include a
memory card. Memory cards are available as separate
enhancements.
1. Open the cover of the memory card slot.
2. Insert the memory card in the slot with the contact
area first. Make sure that the contact area is facing
the connectors on the device.
3. Push the card in until it locks into place.
Cyan Magenta Yellow Black
13
4. Close the cover.
Attach the wrist strap
Eject the memory card
Thread the wrist strap as shown, and
tighten it.
Important: Do not remove the memory card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
1. Press the power key briefly, and select Remove
memory card.
2. Open the cover of the memory card slot.
3. Press the end of the memory card to release it from
the memory card slot.
4. Close the cover.
Antennas
Your device may have internal and external antennas.
As with any radio transmitting device, avoid touching
the antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an
antenna affects the communication quality and may
cause the device to operate at a higher power level
than otherwise needed and may reduce the battery
life.
Connect the headset
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset
connector of your device.
14
Cyan Magenta Yellow Black
Get started
After you have set up your device, switch it on and start
to explore what is new in Eseries.
First start-up
1. Press and hold the power key until
you feel the device vibrate.
2. If prompted, enter the PIN code or
lock code, and select OK.
3. When prompted, enter the country in
which you are located and the current
date and time. To find your country,
enter the first letters of the country
name. It is important to select the
correct country, because scheduled
calendar entries may change if you
change the country later and the new
country is located on a different time zone.
4. The Welcome application opens. Select from the
various options, or select Exit to close the
application.
configure some settings automatically. You can also
contact your service provider for the correct settings.
You can switch the device on without inserting a SIM
card. The device starts up in the offline mode, and you
cannot use the network-dependent phone functions.
To switch the device off, press and hold the power key.
Home screen
From the home screen you can quickly access features
that you use the most, and see at a glance any missed
calls or new messages.
To configure the various settings in your device, use
the wizards available on the home screen and the
Settings wizard application. When you switch the
device on, it may recognise the SIM card provider and
Cyan Magenta Yellow Black
15
You can define two separate home screens for different
purposes, such as one screen to show your business email and notifications, and another to show your
personal e-mail. This way, you do not have to see
business-related messages outside office hours.
card and to check the amount of free memory, select
OptionsMemory details.
To create a new folder, select OptionsNew
folder.
To rename a new folder, select OptionsRename.
To rearrange the folder, scroll to the application you
want to move, and select OptionsMove. A check
mark is placed beside the application. Scroll to a new
location, and select OK.
Menu
Select Menu.
The menu is a starting point
from which you can open all
applications in the device or
on a memory card.
The menu contains
applications and folders,
which are groups of similar
applications. All
applications you install in
the device yourself are by
default saved in the
Installations folder.
To move an application to a different folder, scroll to
the application you want to move, and select
OptionsMove to folder, the new folder, and OK.
To download applications from the web, select
OptionsDownload applications.
Transfer
To open an application,
scroll to it, and press the
scroll key.
To view the applications in a list, select Options
Change viewList view. To return to the grid view,
select OptionsChange viewGrid view.
To make the application icons and folders animated,
select OptionsIcon animationOn.
16
To view the memory consumption of different
applications and data stored on the device or memory
Select MenuToolsSwitch.
You can transfer content, such as contacts, from a
compatible Nokia device to your new Eseries device
using Bluetooth connectivity or infrared. The type of
content that can be transferred depends on the device
model. If the other device supports synchronisation,
you can also synchronise data between the two devices
or send data from this device to the other device.
When you transfer data from your previous device, it
may require you to insert the SIM card. Your new Eseries
device does not need a SIM card when transferring
data.
Content is copied from the memory of the other device
to the corresponding location in your device. Copying
Cyan Magenta Yellow Black
time depends on the amount of data to be transferred.
You can also cancel and continue later.
The necessary steps for data transfer may vary
depending on your device, and whether you have
interrupted data transfer earlier. The items that you
can transfer vary depending on the other device.
Transfer content between
devices
To connect the two devices, follow the instructions on
the display. For some device models, the Transfer
application is sent to the other device as a message. To
install Transfer on the other device, open the message,
and follow the instructions on the display. On your new
Eseries device, select the content you want to copy
from the other device.
After the data transfer, you can save the shortcut with
the transfer settings to the main view to repeat the
same transfer later. To edit the shortcut, select
OptionsShortcut settings.
Display indicators
The device is being used in a UMTS network
(network service).
The battery charge level. The higher the bar,
the stronger the charge in the battery.
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder in Messaging.
You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
You have selected the Silent profile, and the
device does not ring for an incoming call or
message.
Bluetooth is active.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking,
your device is trying to connect with another
device.
An infrared connection is active. If the indicator
blinks, your device is trying to connect to the
other device, or the connection has been lost.
17
Cyan Magenta Yellow Black
A GPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
A UMTS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
, the connection is active. If the icon is , the
connection is on hold.
You have set the device to scan for WLANs, and
a WLAN is available.
A WLAN connection is active in a network that
does not have encryption.
A WLAN connection is active in a network that
has encryption.
18
Your device is connected to a computer with a
USB data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If
you have two phone lines, a number indicates
the active line.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not
disturb mode, because the ringing type setting
of your device is set to Beep once or Silent, or
you have an incoming or ongoing phone call.
In this mode, you cannot make PTT calls.
Cyan Magenta Yellow Black
Common actions in
several applications
You can find the following actions in several
applications:
To change the profile, or switch off or lock the device,
press the power key briefly.
To select different items, such as messages, files, or
contacts, scroll to the item you want to select. Select
OptionsMark/UnmarkMark to select one item
or OptionsMark/UnmarkMark all to select all
items.
Tip: To select almost all items, first select
OptionsMark/UnmarkMark all, then
select the items you do not want, and Options
Mark/UnmarkUnmark.
If an application consists of
several tabs (see figure),
open a tab by scrolling right
or left.
To select an object (for example, an attachment in a
document) scroll to the object so that square markers
appear on each side of the object.
To save the settings that you
have configured in an
application, select Back.
Lock the keys
The keypad of your device locks automatically to
prevent the keys from being accidentally pressed. To
change the period after which the keypad is locked,
select MenuToolsSettingsGeneral
SecurityPhone and SIM cardKeypad autolock
period.
To save a file, select
OptionsSave. There are
different saving options
depending on the
application you use.
To send a file, select
OptionsSend. You can send a file in an e-mail or
multimedia message, or using Bluetooth connectivity
or infrared.
To copy, press and hold the shift key, and select the text
with the scroll key. Press and hold the shift key, and
select Copy. To paste, scroll to where you want to paste
the text, press and hold the shift key, and select
Paste. This method may not work in applications that
have their own copy and paste commands.
Cyan Magenta Yellow Black
19
To lock the keys manually
in the home screen, press
the left selection key and
the function key.
consumed by each data type, select Menu
OptionsMemory detailsPhone memory or
Memory card.
Tip: To ensure that you have adequate memory,
transfer data regularly to a memory card or
computer, or use File manager to delete files you
no longer need.
After you install applications to a compatible memory
card, installation files (.sis, .sisx) remain in the device
memory. The files may use large amounts of memory
and prevent you from storing other files. To maintain
sufficient memory, use Nokia PC Suite to back up
installation files to a compatible PC, then use the file
manager to remove the installation files from the
device memory. If the .sis file is a message attachment,
delete the message from the Messaging inbox.
To lock the keys manually
in the menu or in an open
application, press the
power key briefly, and
select Lock keypad.
To unlock the keys, press
the left selection key and
the function key.
Volume control
To adjust the earpiece volume during a phone call or
the volume of the media applications, use the volume
keys.
Memory
There are two types of memory into which you can save
data or install applications: device memory and
memory card.
Free memory
20
To see how much memory is currently in use, how
much free memory remains, and how much memory is
Memory card
Select MenuToolsMemory.
If you cannot use a memory card in your device, you
may have the wrong type of memory card, the card may
not be formatted for your device, or the card has a
corrupted file system. Your Nokia device supports the
FAT16 and FAT32 file system for memory cards.
MicroSDHC
This device uses microSD and microSDHC
memory cards.
To ensure interoperability, use only
compatible memory cards with this device. Check the
compatibility of a memory card with its manufacturer
or provider. Other memory cards than microSD and
Cyan Magenta Yellow Black
microSDHC cards are not compatible with this device.
Using an incompatible memory card may damage the
memory card as well as the device, and data stored on
the incompatible card may be corrupted.
Write text
The input methods provided in the device may vary
according to different sales markets.
Use a memory card
To format a memory card for your device, select
OptionsFormat memory card. When a memory
card is formatted, all data on the card is lost
permanently. Consult your retailer to find out if you
must format the memory card before you can use it.
To change the name of the memory card, select
OptionsMemory card name.
You can protect a memory card with a password to
prevent unauthorised access. To set a password, select
OptionsSet password. The password can be up to
eight characters long and is case-sensitive. The
password is stored in your device. You do not need to
enter it again while you use the memory card in the
same device. If you use the memory card in another
device, you are asked for the password. Not all memory
cards support password protection.
To remove the memory card password, select
OptionsRemove password. When you remove the
password, the data on the memory card is not
protected against unauthorised use.
To open a locked memory card, select Options
Unlock memory card. Enter the password.
Traditional text input
Your device has a full keyboard. You can enter
punctuation marks by pressing the corresponding key
or a combination of keys.
To switch between the different character cases, press
, and
the shift key. On the display,
indicate the selected character case.
To insert digits or characters printed at the top of keys,
press and hold the corresponding key, or press and
hold the function key and press the corresponding key.
To enter only the characters printed at the top of keys,
press the function key twice quickly.
To erase a character, press the backspace key. To erase
several characters, press and hold the backspace key.
To insert characters that are not shown on the keypad,
press the chr key.
To copy text, press and hold the shift key, and scroll to
highlight the word, phrase, or line of text you want to
copy. Press the function key + chr + c. To insert the text
into a document, move to the correct place and press
the function key + chr + v.
To change the writing language, or to switch off the
predictive text input, press the function key + spacebar,
and select from the available options.
Cyan Magenta Yellow Black
21
Predictive text input
To activate predictive text input, press the function key
+ spacebar and select Predictive inputOn. The
is shown on the display. When you
indicator
start writing a word, your device suggests possible
words. When the correct word is found, scroll right to
confirm it. While writing, you can also scroll down to
access a list of suggested words. If the desired word is
on the list, scroll to it and press the scroll key. If the
word you are writing is not in the dictionary of the
device, the device suggests a possible word, while the
word you were writing is shown above the suggested
word. Scroll up to select your word. The word is added
to the dictionary when you start writing the next word.
To browse the help topics and conduct searches, select
MenuHelpHelp. You can select categories for
which you want to see instructions. Select a category,
such as Messaging, to see what instructions (help
topics) are available. While you are reading the topic,
scroll left or right to see the other topics in that
category.
To switch between the application and help, press and
hold the home key.
Tutorial
The tutorial provides you information about your
device and shows you how to use it. Select Menu
HelpTutorial.
To switch predictive text input off, press the function
key + spacebar and select Predictive inputOff.
To define the settings for text input, select Options
Input optionsSettings.
To change the writing language, select Options
Input optionsInput language.
Further information
Extended user guide
An extended version of this user guide is available on
the Nokia web site. Some applications or functions are
explained only in the extended user guide.
Instructions in your device
22
To read instructions for the current view of the open
application, select OptionsHelp.
Cyan Magenta Yellow Black
New from Eseries
Your new Eseries device contains new versions of the
Calendar and Contacts applications, as well as a new
home screen.
Access tasks quickly
Whenever you see
the icon on the
home screen, or
in the Contacts or
Calendar
applications,
scroll right to
access a list of
available actions.
To close the list,
scroll left.
When you navigate in these applications, to go back to
the previous level, scroll left.
Home screen
From the home screen you can quickly access features
that you use the most, and see at a glance any missed
calls or new messages.
Navigate in the home screen
To access the home screen, press the home key briefly.
The home screen consists of:
ವ application shortcuts (1)
To access an application
quickly, scroll to its
shortcut and press the
scroll key.
ವ information area (2) To
check an item displayed
in the information area,
scroll to the item and
press the scroll key.
ವ notifications (3) To view
the notifications, scroll to
a box. Each box is only visible if there are items in it.
To hide the boxes, press the backspace key.
To define what kind of items and shortcuts you want
to see on the home screen, and to set the appearance
of the home screen, select MenuToolsModes.
Work on the home screen
To search for contacts in the home screen, start
entering the contact's name. The device suggests
Cyan Magenta Yellow Black
23
matching contacts. Scroll to the desired contact. This
feature may not be available in all languages.
One-touch keys
To call the contact, press the call key.
With the One-touch keys you can access applications
and tasks quickly. Each key has been assigned an
application and a task. To change these, select Menu
ToolsSettingsGeneralPersonalisation
One-touch keys. Your network operator may have
assigned applications to the keys, in which case you
cannot change them.
To set off the contact search, select OptionsContact
search off.
To check your received messages, scroll to the message
box in the notification area. To read a message, scroll
to it and press the scroll key. To access other tasks,
scroll right.
To view your missed calls, scroll to the calls box in the
notification area. To return a call, scroll to a call and
press the call key. To send a text message to a caller,
scroll to a call, scroll right and select Send text msg.
from the list of available actions.
To listen to your voice mail, scroll to the voice mail box
in the notification area. Scroll to the desired voice
mailbox and press the call key to call it.
Switch home screens
You can define two home screen modes for different
purposes, such as one mode to show your business email and notifications, and another to show your
personal e-mail. This way, you do not have to see
business-related messages outside office hours.
Your operator may have set you a third home screen
with operator-specific items.
To change from one home screen mode to another,
and press the scroll key.
scroll to
Home key
To access the home screen, press the home key briefly.
Press the home key briefly again to access the menu.
To view the list of active applications, press the home
key for a few seconds. When the list is open, press the
home key briefly to scroll the list. To open the selected
application, press the home key for a few seconds, or
press the scroll key. To close the selected application,
press the backspace key.
Leaving applications running in the background
increases the demand on battery power and reduces
the battery life.
Contacts key
To open the Contacts application, press the contacts
key briefly.
To create a new contact, press the contacts key for a
few seconds.
24
Cyan Magenta Yellow Black
Calendar key
To open the Calendar application, press the calendar
key briefly.
To create a new meeting entry, press the calendar key
for a few seconds.
ವ Day view shows the events for the selected day
grouped into time slots according to their starting
time.
ವ To-do view shows all to-do items.
ವ Agenda view shows the events for the selected day
in a list.
To open your default mailbox, press the e-mail key
briefly.
To change the view, select OptionsChange view
and the desired view.
Tip: To open the week view, scroll to a week
number and press the scroll key.
To create a new e-mail message, press the e-mail key
for a few seconds.
To move to the next or the previous day in month,
week, day, and agenda views, scroll right or left.
E-mail key
Nokia Calendar for
Eseries
Select MenuOfficeCalendar.
Create and view scheduled events and appointments,
and switch between different calendar views.
Calendar views
You can switch between the following views:
ವ Month view shows the current month and the
calendar entries of the selected day in a list.
ವ Week view shows the events for the selected week
in seven day boxes.
To change the default view, select Options
SettingsDefault view.
View calendar information
In the month view, calendar
entries are marked with a
triangle. Anniversary entries
are also marked with an
exclamation mark. The
entries of the selected day
are shown in a list.
To open calendar entries,
open a calendar view, scroll
to an entry, and press the
scroll key.
25
Cyan Magenta Yellow Black
Create calendar entries
You can create the following types of calendar entries:
ವ Meeting entries remind you of events that have a
specific date and time.
ವ Memo entries are related to the whole day but not
to a specific time of the day.
ವ Anniversary entries remind you of birthdays and
special dates. They refer to a certain day but not a
specific time of the day. Anniversary entries are
repeated every year.
ವ To-do entries remind you of a task that has a due
date but not a specific time of the day.
To create a calendar entry, scroll to a date, select
OptionsNew entry and the entry type.
Tip: To create a meeting entry, start entering the
subject.
Create meeting, memo, anniversary, or to-do
entries
26
1. Enter the subject.
2. For meeting entries, enter the start and end times,
or select All-day event.
3. For meeting and memo entries, enter the start and
end dates. For anniversary entries, enter the date
and for to-do entries, enter the due date.
4. For meeting entries, enter the location.
5. For meeting, anniversary, and to-do entries, you
can set an alarm.
6. For recurring meeting entries, set the recurrence
time.
7. For to-do entries, set the priority. To set the priority
for meeting entries, select OptionsPriority.
8. For memo, anniversary, and to-do entries, define
how the entry is handled during synchronisation.
Select Private to hide the entry from viewers if the
calendar is available online, Public to make the
entry visible to viewers, or None to not copy the
entry to your computer.
9. Enter a description.
To send the entry, select OptionsSend.
Calendar settings
Select OptionsSettings.
To change the alarm tone, select Calendar alarm
tone.
To change the view displayed when you open the
calendar, select Default view.
To change the first day of the week, select Week starts
on.
To change the week view title, select Week view
title and Week number or Week dates.
Nokia Contacts for
Eseries
Select MenuCommunic.Contacts.
Save and update contact information, such as phone
numbers, home addresses, or e-mail addresses of your
Cyan Magenta Yellow Black
contacts. You can add a personal ringing tone or a
thumbnail image to a contact. You can also create
contact groups, which allow you to communicate with
several contacts at the same time, and send contact
information (business cards) to or receive it from
compatible devices.
To make a conference call to the group, select the
group, scroll right, and select Call conf. service from
the list of available actions.
icon, scroll right to access a
Whenever you see the
list of available actions. To close the list, scroll left.
To search for contacts, start entering the contact's
name in the search field.
Add contacts
Manage contacts directories
Select OptionsNew contact, and enter the
contact's information.
You can install contacts directories from the Download!
application.
To copy a contact's information from the memory card,
select OptionsCopyFrom memory card.
To change the contacts directory, scroll to the top of
the names list, press the scroll key, and select from the
list of available directories.
Contact groups
To organise contacts directories, select Options
Organise contact lists and a directory. Scroll up to
move it to the desired place.
Select each contact you want to add to the contact
group, select OptionsMark/UnmarkMark to
mark it, select OptionsGroupAdd to group
Create new groupGroup name, and enter a name
for the group.
If you want to make conference calls to the group,
define also the following:
ವ Conf. service number — Enter the conference call
service number.
ವ Conf. service ID — Enter the conference call ID
number.
ವ Conf. service PIN — Enter the conference call PIN
code number.
Search for contacts
Add ringing tones for
contacts
You can set a ringing tone for a contact or contact
group. The ringing tone sounds when the contact calls
you.
To add a ringing tone for contacts, open a contact,
select OptionsRinging tone and a ringing tone.
To add a ringing tone for contact groups, select a
contact group, OptionsGroupRinging tone and
a ringing tone.
Cyan Magenta Yellow Black
27
To remove the assigned ringing tone, select Default
tone from the list of ringing tones.
Change contacts settings
Select OptionsSettings.
To change the way the contacts' names are displayed,
select Name display.
To select which contacts directory opens when you
open the Calendar application, select Default contact
list.
Multitasking
28
You can have several applications open at the same
time. To switch between active applications, press and
hold the home key, scroll to an application, and press
the scroll key. To close the selected application, press
the backspace key.
Example: When you have an active phone call
and want to check your calendar, press the home
key to access the menu, and open the Calendar
application. The phone call remains active in the
background.
Example: When you are writing a message and
want to check a web site, press the home key to
access the menu, and open the Web application.
Select a bookmark or enter the web address
manually, and select Go to. To return to your
message, press and hold the home key, scroll to
the message and press the scroll key.
Cyan Magenta Yellow Black
Phone
To make and receive calls, the device must be switched
on, the device must have a valid SIM card installed, and
you must be located in the service area of a cellular
network.
To make or receive a net call, your device must be
connected to a net call service. To connect to a net call
service, your device must be in the coverage of a
connection network, such as a WLAN access point.
Voice calls
Note: The actual invoice for calls and services from
your service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
key to answer a new incoming call. The first call is put
on hold. To end the active call, press the end key.
Make a call
Important: If the device has been locked, enter the
lock code to activate the phone function. When the
device is locked, calls may be possible to the official
emergency number. Making an emergency call in the
offline profile or when the device is locked requires
that the device recognise the number to be an official
emergency number. It is advisable to change the
profile or unlock the device by entering the lock code
before you make the emergency call.
To reject a call, press the end key.
To make a call, enter the phone number, including the
area code, and press the call key.
Tip: For international calls, add the + character
that replaces the international access code, and
enter the country code, area code (omit the
leading 0, if necessary), and phone number.
To mute the ringing tone instead of answering a call,
select Silence.
To end the call or cancel the call attempt, press the end
key.
When you have an active call and the call waiting
function (network service) is activated, press the call
To make a call using the saved contacts, press the
contacts key. Enter the first letters of the name, scroll
Answer a call
To answer a call, press the call key.
Cyan Magenta Yellow Black
29
to the name, and press the call key. See "Nokia Contacts
for Eseries", p. 26.
Video calls
To make a call using the log, press the call key to view
up to 20 numbers that you last called or attempted to
call. Scroll to the desired number or name, and press
the call key. See "Log", p. 35.
To switch from a voice call to a video call, select
OptionsSwitch to video call. The device ends the
voice call and makes a video call to the recipient.
To be able to make a video call, you need to be in the
coverage of a UMTS network. For availability of and
subscription to video call services, contact your
network operator or service provider. While talking,
you can see a real-time, two-way video between you
and the recipient of the call, if the recipient has a
compatible mobile phone. The video image captured
by the camera in your device is shown to the video call
recipient. A video call can only be made between two
parties.
Make a conference call
Make a video call
To adjust the volume of an active call, use the volume
keys.
1. To make a conference call, enter a participant's
phone number, and press the call key.
2. When the participant answers, select Options
New call.
3. When you have made a phone call to all the
participants, select OptionsConference to
merge the calls into a conference call.
To drop a participant from the conference call, scroll to
the participant, and select OptionsConference
Drop participant.
To make a video call, enter the phone number or select
the recipient of the call from Contacts, and select
OptionsCallVideo call. When the video call
starts, the camera of the device is activated. If the
camera is already in use, video sending is disabled. If
the recipient of the call does not want to send a video
back to you, a still image is shown instead. You can
define the still image in MenuToolsSettings
PhoneCallImage in video call.
To discuss privately with a conference call participant,
scroll to the participant, and select Options
ConferencePrivate.
To disable the sending of audio, video, or video and
audio, select OptionsDisableSending audio,
Sending video, or Sending aud. & video.
To mute the microphone of your device during the call,
select OptionsMute.
30
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker for receiving audio, select
OptionsActivate loudspeaker. To mute the
Cyan Magenta Yellow Black
loudspeaker and use the earpiece, select Options
Activate handset.
To swap the places of images, select Options
Change image order.
To zoom the image on the display, select Options
Zoom in or Zoom out.
To end the video call and make a new voice call to the
same recipient, select OptionsSwitch to voice
call.
Share a video
Use Video sharing (network service) to send live video
or a video clip from your mobile device to another
compatible mobile device during a voice call. To use
this feature, the device must be within the coverage of
a UMTS network.
1. Make a phone call to the selected recipient. You can
start sharing a video once the phone call is
established and your device has been registered to
the SIP server.
2. To send live video or a video clip from your device,
select OptionsShare videoLive or Clip. To
preview the clip, select OptionsPlay.
3. Select the recipient from Contacts, or enter the
recipient's SIP address manually to send an
invitation to the recipient. Sharing begins
automatically when the recipient accepts the video
sharing.
4. To end sharing the video, select Stop. The voice call
continues normally.
Receive a video sharing
invitation
When you receive a video sharing invitation, a message
is displayed showing the caller's name or SIP address.
To accept the invitation and begin the sharing session,
select Accept.
To reject the invitation, select Reject. The voice call
continues normally.
Net calls
Select MenuCommunic.Internet tel..
Your device supports voice calls over the internet (net
calls). Your device attempts emergency calls primarily
over cellular networks. If an emergency call using
cellular networks is not successful, your device
attempts an emergency call through your net call
provider. Due to the established nature of cellular
telephony, you should use cellular networks for
emergency calls, if possible. If you have cellular
network coverage available, make sure that your
cellular phone is switched on and ready to make calls
before you attempt an emergency call. The capability
for an emergency call using internet telephony
depends on the availability of a WLAN and your net call
provider's implementation of emergency call
capabilities. Contact your net call provider to check the
internet telephony emergency call capability.
With the net call service (network service), you can
make and receive calls over the internet using the VoIP
(voice over internet protocol) technology. Net calls can
Cyan Magenta Yellow Black
31
be established between computers, between mobile
phones, and between a VoIP device and a traditional
telephone. To make or receive a net call, your device
must be within WLAN coverage, for example. The
availability of the net call service may vary according
to your country or area.
Create a net call profile
Before you can make net calls, you need to create a net
call profile.
1. Select MenuToolsSettings
ConnectionSIP settingsOptionsNew
SIP profile, and enter the required information. To
make the login to the net call service automatic,
select RegistrationAlways on. Contact your net
call provider for the correct settings.
2. Select Back until you return to the Connection
settings main view.
3. Select Internet tel.OptionsNew profile.
Enter a name for the profile, and select the SIP
profile you just created.
To set the created profile to be used automatically
when connecting to the net call service, select Menu
Communic.Internet tel.Preferred profile.
To login to the net call service manually, select
RegistrationWhen needed in the SIP settings
when creating a net call profile.
32
Connect to the net call
service
Select MenuCommunic.Internet tel..
To make or receive a net call, your device must be
connected to a net call service. If you have selected
automatic login, your device automatically connects to
the net call service. If you login to the service manually,
select an available network from the list and Select.
The list of networks is refreshed automatically every 15
seconds. To refresh the list manually, select Options
Refresh. Use this option if your WLAN is not shown on
the list.
To select a net call service for outgoing calls if the
device is connected to more than one service, select
OptionsChange service.
To configure new services, select Options
Configure service. This option is shown only if there
are services that have not been configured.
To save the network to which you are currently
connected, select OptionsSave network. The
saved networks are marked with a star on the list of
networks.
To connect to a net call service using a hidden WLAN,
select OptionsUse hidden network.
To end the connection to a net call service, select
OptionsDisconnect from service.
To make secure net calls, ask your service provider for
secure net call settings. The proxy server selected for
the net call profile must support secure net calls. A
secure net call is indicated with .
Cyan Magenta Yellow Black
Make net calls
You can make a net call from all applications where you
can make a regular voice call. For example in Contacts,
scroll to the desired contact, and select CallInternet
call.
To make a net call in the home screen, enter the SIP
address, and press the call key.
To set net call as the preferred call type for outgoing
calls, select MenuCommunic.Internet tel.
OptionsSettingsDefault call typeInternet
call. When your device is connected to a net call service,
all calls are made as net calls.
1-touch dialing
Select MenuToolsSettingsPhoneCall
Speed diallingOn.
1-touch dialing allows you to make a call by pressing
and holding a number key when in the home screen.
To assign a number key to a phone number, select
MenuCommunic.Speed dial. Scroll to the
number key (2 - 9) on the display, and select Options
Assign. Select the desired number from Contacts.
To delete the phone number assigned to a number key,
scroll to the 1-touch dialing key, and select Options
Remove.
To modify a phone number assigned to a number key,
scroll to the 1-touch dialing key, and select Options
Change.
Voice mail
Select MenuCommunic.Call mailbox.
When you open the Voice mail application for the first
time, you are asked to enter the number of your voice
mailbox.
To call your voice mail, select OptionsCall voice
mailbox.
If you have configured net call settings to your device
and have an internet call mailbox, select Internet call
mailboxOptions{No display_text mapping
for 'qtn_voip_call_mailbox.vm', locale='en'} to call
it.
To call your voice mail when in the home screen, press
and hold 1; or press 1 and then the call key. If you have
defined an internet call mailbox, select whether you
want to call your voice mail or internet call mailbox.
To change the voice mailbox number, select the
mailbox and OptionsChange number.
To change the internet call mailbox address, select the
mailbox and OptionsChange address.
Voice aid
Select MenuToolsVoice aid.
The Voice aid application reads text on the display,
allowing you to use the basic functions of your device
without looking at the display.
Cyan Magenta Yellow Black
33
To hear the entries in your contacts list, select
Contacts. Do not use this option if you have more than
500 contacts.
dependent on a speaker’s voice; however, the voice
recognition in the device adapts to the main user’s
voice to recognise voice commands better.
To hear information on your missed and received calls,
dialled numbers, and frequent calls, select Recent
calls.
Make a call
To listen to your voice messages, select Voice
mailbox.
A voice tag for a contact is the name or nickname that
is saved on the contact in Contacts.
To dial a telephone number, select Dialler.
To use voice commands to make a phone call, select
Voice commands.
To have your received messages read aloud, select
Message reader.
To hear the current time, select ClockTime. To hear
the current date, select ClockDate.
If the Voice aid application is open when a calendar
alarm is due, the application reads the calendar alarm
content aloud.
To hear more options, select Options.
Voice commands
34
Select MenuToolsVoice comm..
Use voice commands to make phone calls and launch
applications, profiles, or other functions on the device.
The device creates a voice tag for the entries in Contacts
and for the functions designated in the Voice
commands application. When a voice command is
spoken, the device compares the spoken words to the
voice tag in the device. Voice commands are not
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
To listen to a voice tag, open a contact, and select
OptionsPlay voice tag.
1. To make a call using a voice command, press and
hold the voice key.
2. When you hear the tone or see the visual display,
clearly speak the name saved on the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout
of 1.5 seconds, the device dials the number. If the
recognised contact was not correct, select Next to
view a list of other matches or Quit to cancel
dialling.
If several numbers are saved under the contact, the
device selects the default number, if it has been set.
Otherwise, the device selects the first available
number of the following fields: Mobile, Mobile
(home), Mobile (business), Telephone, Tel.
(home), and Tel. (business).
Cyan Magenta Yellow Black
Push to talk
To view the approximate duration of calls to and from
your device, select Call duration.
Select MenuCommunic.PTT.
Push to talk (PTT) (network service) provides direct
voice communication connected with the push of a key.
With PTT, you can use your device as a walkie-talkie:
one person talks while the others listen through the
built-in loudspeaker. Users take turns responding to
each other. Because only one user can talk at a time,
the maximum duration of a speech turn is limited. For
details of the speech turn duration, contact your
service provider.
To view the amount of data transferred during packet
data connections, select Packet data.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Log
Select MenuLog.
Log stores information about the communication
history of the device. The device registers missed and
received calls only if the network supports these
functions, the device is switched on and within the
network service area.
Call and data registers
To view recently missed, received, and dialled calls,
select Recent calls.
Tip: To open Dialled numbers when in the
home screen, press the call key.
Monitor all communications
To monitor all voice calls, text messages, or data
connections registered by the device, open the general
log tab.
To view detailed information about a communication
event, scroll to it, and press the scroll key.
Tip: Subevents, such as a text message sent in
more than one part and packet data
connections, are logged as one communication
event. Connections to your mailbox, multimedia
messaging centre, or web pages are shown as
packet data connections.
To add the phone number from a communication event
to Contacts, select OptionsSave to Contacts, and
select to create a new contact or to add the phone
number to an existing contact.
To copy the number, for example to paste it to a text
message, select OptionsCopy number.
To view a single type of communication event or
communication events with one other party, select
OptionsFilter, and select the desired filter.
To erase the contents of the log, recent calls register,
and messaging delivery reports permanently, select
OptionsClear log.
Cyan Magenta Yellow Black
35
Messaging
36
Select MenuCommunic.Messaging.
In Messaging (network service), you can send and
receive text messages, multimedia messages, audio
messages, and e-mail messages. You can also receive
web service messages, cell broadcast messages, and
special messages containing data, and send service
commands.
Before sending or receiving messages, you may need
to do the following:
ವ Insert a valid SIM card in the device and be located
in the service area of a cellular network.
ವ Verify that the network supports the messaging
features you want to use and that they are activated
on your SIM card.
ವ Define the internet access point settings on the
device. See "Internet access points", p. 47.
ವ Define the e-mail account settings on the device. See
"E-mail account settings", p. 43.
ವ Define the text message settings on the device. See
"Text message settings", p. 41.
ವ Define the multimedia message settings on the
device. See "Multimedia message
settings", p. 42.
The device may recognise the SIM card provider and
automatically configure some of the message settings.
If not, you may need to define the settings manually;
or contact your service provider to configure the
settings.
Messaging folders
Messages and data received using Bluetooth
connectivity or infrared are stored in the Inbox folder.
E-mail messages are stored in Mailbox. Messages that
you have been writing can be stored in the Drafts
folder. Messages that are waiting to be sent are stored
in the Outbox folder, and messages that have been
sent, excluding Bluetooth and infrared messages, are
stored in the Sent folder.
Tip: Messages are placed in Outbox, for example,
when your device is outside network coverage.
You can also schedule e-mail messages to be
sent the next time you connect to your remote
mailbox.
Note: The message sent icon or text on your device
screen does not indicate that the message is received
at the intended destination.
To request the network to send you a delivery report
of the text messages and multimedia messages you
have sent (network service), select Options
Cyan Magenta Yellow Black
SettingsText message or Multimedia
messageReceive report. The reports are saved in
the Reports folder.
E-mail messages
Select MenuMessagingMailbox.
To receive and send e-mail, you must have a remote
mailbox service. This service may be offered by an
internet service provider, a network service provider,
or your company. Your device is compliant with
internet standards SMTP, IMAP4 (revision 1), and POP3,
and with different vendor-specific e-mail solutions.
Other e-mail providers may offer services with different
settings or features than those described in this user
guide. Contact your e-mail provider or service provider
for more details.
Before you can send, receive, retrieve, reply to, and
forward e-mail on your device, you must also do the
following:
ವ Configure an internet access point. See "Internet
access points", p. 47.
ವ Set up an e-mail account, and define the e-mail
settings correctly. To do this, use the mailbox guide,
or define the account manually. See "E-mail account
settings", p. 43.
Contact your service provider for the correct settings.
Set up your e-mail with the
mailbox guide
If you select MenuMessagingMailbox, and have
not set up your e-mail account, you are prompted to
do so. To start setting up the e-mail account with the
mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4 or POP3, and select
Next.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve email or internet mail messages from a server.
IMAP4 is a version of the internet message
access protocol that lets you access and
manage e-mail messages while the
messages are still on the e-mail server. You
can then choose which messages to
download to your device.
3. In My e-mail address, enter your e-mail address.
Select Next.
4. In Incoming mail server, enter the name of the
remote server that receives your e-mail, and select
Next.
5. In Outgoing mail server, enter the name of the
remote server that sends your e-mail, and select
Next. Depending on your mobile operator, you
might have to use your mobile operator's outgoing
mail server instead of your e-mail provider's.
6. In Access point, select the internet access point
your device should use when it retrieves the e-mail.
If you select Always ask, each time the device starts
Cyan Magenta Yellow Black
37
to retrieve e-mail, it asks which internet access
point it should use. Select Next.
7. Enter a name for your new mailbox, and select
Finish.
When you create a new mailbox, the name you give to
the mailbox replaces Mailbox in the Messaging main
view. You can have up to six mailboxes.
4. To manage your e-mail offline to save in connection
costs and work in conditions that do not allow a
data connection, select OptionsDisconnect to
disconnect from the remote mailbox. Any changes
you make in the remote mailbox folders while
offline, take effect in your remote mailbox the next
time you go online and synchronise.
If you have defined several mailboxes, select one of
them as your default mailbox. That mailbox is used
every time you start composing a new e-mail message.
To define the default mailbox, select Options
SettingsE-mailDefault mailbox and the
mailbox.
Read and reply to e-mail
Important: Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
To read a received e-mail, open it from the mailbox.
Connect to a remote mailbox
38
E-mail addressed to you is not automatically received
by your device, but by your remote mailbox. To read
your e-mail, you must first connect to the remote
mailbox; then select the e-mail messages you wish to
retrieve into your device.
1. To retrieve received e-mail messages to your device
and view them, select your mailbox in the
Messaging main view. When the device asks
Connect to mailbox?, select Yes.
2. Enter your user name and password, if prompted.
3. Select OptionsRetrieve e-mailNew to
retrieve new messages that you have neither read
nor retrieved, Selected to retrieve only messages
you select from the remote mailbox, or All to
retrieve all messages not previously retrieved.
To open an attachment, select Options
Attachments. Scroll to the attachment, and press the
scroll key.
To reply only to the sender of an e-mail, select
OptionsReplyTo sender.
To reply to all recipients of an e-mail, select Options
ReplyTo all.
Tip: If you reply to an e-mail that contains
attached files, the attachments are not included
in the reply. If you forward the received e-mail,
the attachments are included.
To forward an e-mail, select OptionsForward.
To attach a file to an e-mail message, select Options
Insert and the attachment you want to add.
Cyan Magenta Yellow Black
To delete an attachment from an e-mail that you are
sending, select the attachment and Options
Remove.
To set the message priority, select OptionsSending
optionsPriority.
To set the sending time for the e-mail message, select
OptionsSending optionsSend message.
Select Immediately, or select When conn. avail. if
you are working offline.
To call the sender of the e-mail message, if the sender
can be found in Contacts, select OptionsCall.
To reply to the sender of the e-mail with an audio
message or multimedia message, select Options
Create message.
Write and send e-mail
1. To write an e-mail, select New messageEmail.
2. Select OptionsAdd recipient to select the
recipients' e-mail addresses from Contacts, or enter
the e-mail addresses in the To field. Use a semicolon
to separate entries. Use the Cc field to send a copy
to other recipients, or the Bcc field to send a blind
copy to recipients.
3. In the Subject field, enter the subject of the e-mail.
4. Enter your e-mail message in the text area, and
select OptionsSend.
Delete messages
To free up memory space on your device, regularly
delete messages from the Inbox and Sent folders, and
delete retrieved e-mail messages.
To delete e-mail from the device only, and keep the
original on the server, select OptionsDelete
Phone (header remains).
To delete e-mail both from the device and the remote
server, select OptionsDeletePhone and
server.
To cancel the deleting, select OptionsRestore.
Subfolders in your remote email
If you create subfolders in your IMAP4 mailboxes on a
remote server, you can view and manage these folders
with your device when you subscribe to them. You can
only subscribe to folders in your IMAP4 mailboxes.
To view folders in your IMAP4 mailbox, establish a
connection, and select OptionsE-mail settings
Retrieval settingsFolder subscriptions.
To view a remote folder, select a folder and Options
Subscribe. Every time you go online, the subscribed
folders are updated. This may take some time if the
folders are large.
To update the list of folders, select a folder and
OptionsUpdate folder list.
39
Cyan Magenta Yellow Black
Write and send text
messages
Select MenuCommunic.Messaging.
Your device supports text messages beyond the limit
for a single message. Longer messages are sent as two
or more messages. Your service provider may charge
accordingly. Characters with accents or other marks,
and characters from some language options, take up
more space, and limit the number of characters that
can be sent in a single message.
1. To write a text message, select New message
Text message.
2. In the To field, enter a recipient's number, or press
the scroll key to add a recipient from Contacts. If you
enter more than one number, separate the
numbers with a semicolon.
3. Enter the text of the message. To use a template,
select OptionsInsertTemplate.
4. Select OptionsSend.
Multimedia messages
40
Select MenuCommunic.Messaging.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of
a message may vary depending on the receiving device.
A multimedia message (MMS) can contain text and
objects such as images, sound clips, or video clips.
Before you can send or receive multimedia messages
on your device, you must define the multimedia
message settings. Your device may have recognised
the SIM card provider and automatically configured the
multimedia message settings. If not, use Settings
wizard, or contact your service provider for the correct
settings. See "Multimedia message settings", p. 42.
Create and send multimedia
messages
Important: Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
1. To create a new message, select New message
Multimedia message.
2. In the To field, enter a recipient's number or e-mail
address, or press the scroll key to add a recipient
from Contacts. If you enter more than one number
or e-mail address, separate them with a semicolon.
3. In the Subject field, enter a subject for the
message. To change the fields that are visible,
select OptionsAddress fields.
4. Enter the text of the message, and select Options
Insert object to add media objects. You can add
objects such as Image, Sound clip, or Video clip.
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit
the device may make it smaller so that it can be sent
by MMS.
5. Each slide of your message can contain only one
video or sound clip. To add more slides to your
Cyan Magenta Yellow Black
message, select OptionsInsert newSlide.
To change the order of slides in your message,
select OptionsMove.
6. To preview a multimedia message before sending
it, select OptionsPreview.
7. Select OptionsSend.
To delete an object from a multimedia message, select
OptionsRemove.
To set the sending options for the current multimedia
message, select OptionsSending options.
Instant messaging
Select MenuCommunic.IM.
Instant messaging (IM) (network service) allows you to
converse with other people using instant messages
and join discussion forums (IM groups) with specific
topics. Various service providers maintain IM servers
that you can log in to after you register to an IM service.
Service providers may differ in their support of
features.
If IM is not available from your service provider, it may
not appear in the menu of your device. Contact your
service provider for more information about signing up
for IM services, costs of services, and IM settings. You
may receive the settings in a special text message from
the service provider.
Messaging settings
Select MenuCommunic.Messaging
OptionsSettings.
Fill in all fields marked with Must be defined or with
a red asterisk.
Your device may recognise the SIM card provider and
configure the correct text message, multimedia
message, and GPRS settings automatically. If not,
contact your service provider for the correct settings,
order the settings from your service provider in a
configuration message, or use the Settings wizard
application.
Text message settings
Select MenuCommunic.Messaging
OptionsSettingsText message.
Select from the following:
ವ Message centres — View the available message
centres for your device, or create a new one.
ವ Message centre in use — Select a message centre
to send the message.
ವ Character encoding — Select Reduced support to
use automatic character conversion to another
encoding system when available.
ವ Receive report — Select Yes if you want the
network to send you delivery reports on your
messages (network service).
ವ Message validity — Select how long the message
centre resends your message if the first attempt fails
(network service). If the recipient cannot be reached
Cyan Magenta Yellow Black
41
within the validity period, the message is deleted
from the message centre.
ವ Message sent as — Convert the message to another
format, such as Text, Fax, Paging, or E-mail.
Change this option only if you are sure that your
message centre is able to convert text messages into
these other formats. Contact your service provider.
ವ Preferred connection — Select the preferred
method of connection when sending text messages
from your device.
ವ Reply via same centre — Select whether you want
the reply message to be sent using the same text
message centre number (network service).
Multimedia message
settings
42
Select MenuCommunic.Messaging
OptionsSettingsMultimedia message.
Select from the following:
ವ Image size — Select Small or Large to scale images
in multimedia messages. Select Original to
maintain the original image size.
ವ MMS creation mode — Select Restricted to have
your device prevent you from including content in
multimedia messages that may not be supported by
the network or the receiving device. To receive
warnings about including such content, select
Guided. To create a multimedia message with no
restrictions on attachment type, select Free. If you
select Restricted, creating multimedia
presentations is not possible.
ವ Access point in use — Select the default access
point to connect to the multimedia message centre.
You may not be able to change the default access
point if it is preset in your device by your service
provider.
ವ Multimedia retrieval — Select Always
automatic to receive multimedia messages always
automatically, Auto in home netw. to receive
notification of a new multimedia message that you
can retrieve from the message centre (for example,
when you are travelling abroad and are outside your
home network), Manual to retrieve multimedia
messages from the message centre manually, or
Off to prevent receipt of any multimedia messages.
ವ Allow anon. msgs. — Select whether you want to
receive messages from unknown senders.
ವ Receive adverts — Select whether you want to
receive messages defined as advertisements.
ವ Receive report — Select Yes to have the status of
the sent message to be shown in the log (network
service). Receiving a delivery report of a multimedia
message that has been sent to an e-mail address
may not be possible.
ವ Deny report sending — Select Yes to not send
delivery reports from your device for received
multimedia messages.
ವ Message validity — Select how long the messaging
centre tries to send the message (network service).
If the recipient of a message cannot be reached
within the validity period, the message is removed
from the multimedia messaging centre. Maximum
time is the maximum amount of time allowed by
the network.
Cyan Magenta Yellow Black
E-mail account settings
Select MenuMessagingOptionsSettings
E-mail.
If you try to edit mailbox settings but have not set up
an e-mail account, the mailbox guide opens and helps
you set up your e-mail account.
If you have defined a mailbox, scroll to it, and press the
scroll key to edit the settings.
The settings available for editing may vary. Some
settings may be preset by your service provider.
Connection settings
To define the connection settings, select an e-mail
account and OptionsEditConnection
settings. To edit the settings for the e-mail you receive,
select Incoming e-mail. To edit the settings for the email you send, select Outgoing e-mail.
User settings
To define the user settings for an e-mail account, select
the account, select OptionsEditUser settings,
and define the following settings:
ವ My name — Enter a name to appear before your email address when you send e-mail.
ವ Reply-to — Select whether you want replies to be
redirected to a different address. Select On, and
enter the e-mail address to which you want to direct
the replies. You can only enter one address to which
replies are directed.
ವ Delete e-mails from — Select whether you want to
delete the e-mail messages only from the device or
from both the device and the server. Select Always
ವ
ವ
ವ
ವ
ask if you want to confirm from where the e-mail
should be deleted every time you delete an e-mail.
Send message — Select to send the e-mail
immediately or when a connection is available.
Send copy to self — Select whether you want to
save a copy of the e-mail to your remote mailbox
and to the address defined in My e-mail address in
the Outgoing e-mail settings.
Include signature — Select whether you want to
attach a signature to your e-mail messages.
New e-mail alerts — Select whether you want to
be notified of a new received e-mail message with
a tone and a note.
Retrieval settings
To define the retrieval settings, select the e-mail
account, select OptionsEditRetrieval
settings, and define the following settings:
ವ E-mail to retrieve — Select whether you want to
retrieve only the e-mail header information such as
sender, subject and date, e-mail, or e-mail with
attachments. This setting is for POP3 mailboxes
only.
ವ Retrieval amount — Select the number of e-mail
messages you want to retrieve from the remote
server to your mailbox.
ವ IMAP4 folder path — Define the folder path for
folders to be subscribed. This setting is for IMAP4
mailboxes only.
ವ Folder subscriptions — Subscribe to other folders
in the remote mailbox and retrieve content from
those folders. This setting is for IMAP4 mailboxes
only.
Cyan Magenta Yellow Black
43
Automatic retrieval settings
To define the automatic retrieval settings for an e-mail
account, select the account, select OptionsEdit
Automatic retrieval, and define the following
settings:
ವ E-mail retrieval — Select Enabled to retrieve new
e-mail messages automatically from your remote
mailbox, or Only in home netw. to retrieve new email messages automatically from your remote
mailbox only when you are in your home network
and not, for example, travelling.
ವ Retrieval days — Select the days on which e-mail
is retrieved to your device.
ವ Retrieval hours — Define the hours between which
the e-mail is retrieved.
ವ Retrieval interval — Select the interval between
retrieving new e-mail messages.
ವ E-mail notifications — Select whether you want to
receive notifications on received e-mail.
ವ Folder view — Define how you want the messages
in Inbox to be shown.
Other settings
44
Select MenuCommunic.Messaging
OptionsSettingsOther.
Select from the following:
ವ Save sent messages — Select whether to store
sent messages in the Sent folder.
ವ Number of saved msgs. — Enter the number of
sent messages to save. When the limit is reached,
the oldest message is deleted.
ವ Memory in use — Select where to save your
messages. You can save messages to the memory
card only if a memory card is inserted.
Cyan Magenta Yellow Black
Internet
With your new Eseries device you can browse both the
internet and your company's intranet, and download
and install new applications to your device. You can
also use your device as a modem and connect your PC
to the internet.
Web
Select MenuWeb.
To browse the web (network service), you need to
configure the internet access point settings. If you are
using a GPRS connection, your wireless network must
support GPRS, and the service must be activated for
your SIM card.
Tip: You may receive the internet access point
settings from your service provider as a special
text message or from the service provider's web
pages. You can also enter the internet access
point settings manually. See "Internet access
points", p. 47.
Check the availability of services, pricing, and fees with
your service provider. Service providers also give you
instructions on how to use their services.
Connection security
If the security indicator ( ) is displayed during a
connection, the data transmission between the device
and the internet gateway or server is encrypted. The
security icon does not indicate that the data
transmission between the gateway and the content
server (or place where the requested resource is
stored) is secure. The service provider secures the data
transmission between the gateway and the content
server.
Security certificates may be required for some services,
such as banking services. You are notified if the identity
of the server is not authentic or if you do not have the
correct security certificate in your device. For more
information, contact your service provider.
Browse the web
To browse the web, select a bookmark or enter the web
address manually, and select Go to. Use only services
that you trust and that offer adequate security and
protection against harmful software.
Tip: When you start to enter the address, the
addresses of the pages you have previously
visited that match your input are displayed. To
Cyan Magenta Yellow Black
45
open a page, scroll to its address, and press the
scroll key.
To move on a web page, use the scroll key, which is
shown as a pointer on the page. When you move the
pointer over a link, the pointer changes into a hand.
Press the scroll key to open the link. On a web page,
new links usually appear underlined in blue and
previously visited links in purple. Images that act as
links have a blue border around them.
The addresses of the pages you visit are saved in the
Auto. bookmarks folder.
information or services you have accessed are stored
in the cache.
Bookmarks
Web settings
To view a bookmarked web page, scroll to the
bookmark, and press the scroll key.
Select MenuWebOptionsSettings.
The Web settings are divided into four groups:
ವ General contains access point and home page
related settings.
ವ Page contains imaging, audio, and pop-up settings.
ವ Privacy contains settings related your privacy.
ವ Web feeds contains settings related to web feeds
and blogs.
To browse to another web page, select Options
Navigation optionsGo to web address, enter the
page address, and select Go to.
To add a bookmark, select OptionsBookmark
managerAdd bookmark.
To organise your bookmarks, select Options
Bookmark manager in the Web main view. You can
move and edit bookmarks, and create new folders.
End a connection
To end the connection and view the browser page
offline, select OptionsToolsDisconnect. To end
the connection and close the browser, select
OptionsExit.
Browse the intranet
Clear the cache
46
To empty the cache, select OptionsClear privacy
dataClear cache.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have
accessed confidential information requiring
passwords, empty the cache after each use. The
Select MenuOfficeIntranet.
Cyan Magenta Yellow Black
To browse your company's intranet, you must create a
company-specific VPN policy. Select MenuTools
SettingsConnectionVPN.
To connect to the intranet, open the Intranet
application, select the connection method and
OptionsConnect.
To define which VPN profile to use in the connection,
select OptionsUse other VPN policy.
To define the settings for the intranet connection,
select OptionsSettings.
Manage items
To open an item or view the content of a folder or
catalogue, scroll to it, and press the scroll key.
To buy the selected item, select OptionsBuy.
To download an item that is free of charge, select
OptionsGet.
To search for an item, select OptionsSearch.
To adjust the settings, select OptionsSettings.
To view the list of downloaded items, select Options
My items.
Download!
Select MenuDownload!.
With Download! (network service), you can browse,
download, and install items, such as latest applications
and related documents, to your device from the web.
The items are categorised under catalogs and folders
provided by Nokia or independent service providers.
Some items may be chargeable, but you can usually
preview them free of charge.
Download! uses your network services to access the
most updated content. For information on additional
items available through Download!, contact your
service provider, or the supplier or manufacturer of the
item.
Only install and use applications and other software
from sources that offer adequate security and
protection against harmful software.
Internet access points
An internet access point is a collection of settings,
which define how the device creates a data connection
to the network. To use e-mail and multimedia services
or to browse web pages, you must first define access
points for these services.
Some or all access points may be preset for your device
by your service provider, and you may not be able to
create, edit, or remove them.
Set up an internet access
point for packet data (GPRS)
1. Select MenuToolsSettings
ConnectionAccess points.
2. Select OptionsNew access point to create a
new access point, or select an existing access point
Cyan Magenta Yellow Black
47
from the list and then OptionsDuplicate access
point to use the access point as a basis for the new
one.
3. Define the following settings.
ವ Connection name — Enter a descriptive name
for the connection.
ವ Data bearer — Select Packet data.
ವ Access point name — Enter the name for the
access point. The name is usually provided by
your service provider.
ವ User name — Enter your user name if required
by the service provider. User names are often
case-sensitive and provided by your service
provider.
ವ Prompt password — Select Yes to enter your
password each time you log into a server or No
to save the password in your device memory and
automate the login.
ವ Password — Enter your password if required by
the service provider. The password is often casesensitive and provided by the service provider.
ವ Authentication — Select Secure to send your
password always encrypted, or Normal to send
your password encrypted when possible.
ವ Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point.
4. After defining the settings, select Options
Advanced settings to define the advanced
settings or Back to save the settings and exit.
48
Set up an access point for
WLAN manually
1. Select MenuToolsSettings
ConnectionAccess points.
2. Select OptionsNew access point to create a
new access point, or select an existing access point
from the list and then OptionsDuplicate access
point to use the access point as a basis for the new
one.
3. Define the following settings.
ವ Connection name — Enter a descriptive name
for the connection.
ವ Data bearer — Select Wireless LAN.
ವ WLAN network name — To enter the service
set identifier (SSID), that is, the name that
identifies the specific WLAN, select Enter
manually. To select the network from the
WLANs in range, select Search for networks.
ವ Network status — Select Hidden if the network
you are connecting to is hidden or Public if it is
not hidden.
ವ WLAN network mode — If you select
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
devices can send and receive data directly with
each other, and no WLAN access point is needed.
ವ WLAN security mode — You must select the
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
Cyan Magenta Yellow Black
additional settings. See the device help for more
information.
ವ WLAN security settings — Edit the security
settings for the selected security mode.
ವ Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point.
To set up a WLAN access point automatically, use the
WLAN wizard. Select MenuConnectivityWLAN
wiz..
Connect PC to web
You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of
your device and your PC.
2. Select Connect PC to Net. The necessary Windows
software is installed to your PC.
3. Accept the installation in your PC. If asked, accept
also the connection. When the connection between
your device and PC is established, the internet
browser of your PC opens.
You must have administrator rights to your PC, and the
autorun option enabled in the PC. If not, run the
setup.exe file from the CD-ROM drive of your PC.
49
Cyan Magenta Yellow Black
Travelling
Need directions? Looking for a restaurant? Your Eseries
device has the tools to get you where you want to be.
About GPS and
satellite signals
50
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites and
their ground stations that monitor the operation of the
satellites. Your device has an internal GPS receiver.
A GPS terminal receives low-power radio signals from
the satellites and measures the travel time of the
signals. From the travel time, the GPS receiver can
calculate its location to the accuracy of metres.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by
adjustments to GPS satellites made by the United States
government and is subject to change with the United
States Department of Defense civil GPS policy and the
Federal Radionavigation Plan. Accuracy can also be
affected by poor satellite geometry. Availability and
quality of GPS signals may be affected by your location,
buildings, natural obstacles, and weather conditions.
The GPS receiver should only be used outdoors to allow
reception of GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular radio
networks for positioning or navigation.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
To enable or disable different positioning methods,
such as Bluetooth GPS, select MenuTools
SettingsGeneralPositioningPositioning
methods.
About satellite signals
If your device cannot find the satellite signal, consider
the following:
ವ If you are indoors, go outdoors to receive a better
signal.
ವ If you are outdoors, move to a more open space.
ವ Ensure that your hand does not cover the GPS
antenna of your device.
Cyan Magenta Yellow Black
ವ If the weather conditions are bad, the signal
strength may be affected.
ವ Establishing a GPS connection may take from a
couple of seconds to several minutes.
Satellite status
To check how many satellites your device has found,
and whether your device is receiving satellite signals,
select MenuGPSGPS dataPosition
OptionsSatellite status. If your device has found
satellites, a bar for each satellite is shown in the
satellite info view. The longer the bar, the stronger the
satellite signal. When your device has received enough
data from the satellite signal to calculate the
coordinates of your location, the bar turns black.
Initially your device must receive signals from at least
four satellites to be able to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when more
satellites are found.
Positioning settings
Select MenuToolsSettingsGeneral
Positioning.
To use a specific positioning method to detect the
location of your device, select Positioning methods.
Maps
Select MenuGPSMaps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, and save
locations and send them to compatible devices. You
can also purchase licences for extra services, such as
travel guides, traffic information, and navigation
service with voice guidance. These services are not
available for all countries or regions.
If you browse to an area which is not covered by maps
already downloaded in your device, a map for the area
is automatically downloaded through the internet.
Some maps may be available in your device or memory
card. You can also use the Nokia Map Loader PC
software to download maps. To install Nokia Map
Loader to a compatible PC, go to
www.maps.nokia.com.
Downloading maps may involve the transmission of
large amounts of data through your service provider's
network. Contact your service provider for information
about data transmission charges.
When you use Maps for the first time, you may need to
select a cellular or a WLAN access point for
downloading maps. To change the access point later,
select OptionsSettingsInternetDefault
access point.
To select a positioning server, select Positioning
server.
Cyan Magenta Yellow Black
51
About Maps
is shown. The map of the location is also downloaded,
if needed.
To connect to the internet automatically when you
start Maps, select OptionsToolsSettings
InternetGo online at start-upAlways on.
To zoom in to your GPS position or your last known
location, press 0.
To prevent automatic downloading of maps, select
OptionsToolsSettingsInternetGo
online at start-upNever.
To set the device to ask your permission before
connecting to the internet, select OptionsTools
SettingsInternetGo online at start-up
Always ask.
To be informed when your device registers to a
network other than your home network, select
OptionsToolsSettingsInternet
Roaming warningOn (shown only when you are
online). For details and roaming costs, contact your
service provider.
Tip: To avoid data transfer costs, you can also
use Maps without an internet connection, and
browse the maps that are saved in your device
or memory card.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography that you download for use in this device.
Move on a map
52
The map coverage varies by country and region.
When you open Maps, the capital of the country you are
in or the location that was saved from your last session
When the GPS connection is active,
current location on the map.
shows your
To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
To zoom in and out on the map, press * and #.
When you browse the map on the display, a new map
is automatically downloaded if you scroll to an area
which is not covered by maps already downloaded.
These maps are free of charge, but downloading may
involve the transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider. The maps are automatically
saved in the device memory or on a compatible
memory card (if inserted).
Display indicators
The GPS indicator
on the bottom right
corner of the display shows the availability and
strength of the satellite signal. One bar is one satellite.
When the device tries to find a satellite, the bar is
yellow. When the device receives enough data from the
satellite to establish a GPS connection, the bar turns
green. The more green bars, the stronger the GPS
connection.
Cyan Magenta Yellow Black
Initially, your device must receive signals from at least
four satellites to calculate the coordinates of your
location. After the initial calculation, signals from three
satellites may be enough.
shows the
The data transfer indicator
internet connection used and the amount of data
transferred since the application started.
Plan a route
To plan a route, select your start point on the map or
search for a location, press the scroll key, and select
AddTo route.
To define the destination and add more locations for
your route, search for the location, and select
OptionsAdd stopover.
Find locations
To show the route on the map, select OptionsShow
route.
To find a location in the city or area displayed on the
map, enter the full or partial address of the location in
the search field, and press the scroll key. To find a
location in another city, enter the city and the full or
partial address, such as London Oxford Street, and
press the scroll key.
To navigate to the destination by car or on foot, if you
have purchased a licence for these extra services, select
OptionsStart driving or Start walking.
To find a specific address, or an address in another
country, press the scroll key, and select Browse
Addresses. Country/Region * and City or post code
are mandatory.
Tip: To search for locations in another country
using the search field, enter also the name of the
country in the search field: Rome Italy.
GPS data
To import a location address from the Contacts
application, press the scroll key and select Browse
AddressesOptionsContact.
The search results are grouped by categories. To limit
the search to one category, select OptionsSearch.
If you search for locations without an internet
connection, the search results are limited to a radius of
50 km (31 miles).
To save the route, select OptionsSave route.
Select MenuGPSGPS data.
With GPS data, you can view your current location, find
your way to a desired location, and track distance.
Select Navigation to view navigating information to
your trip destination, Position to view positioning
information about your current location, or Trip dist.
to view your travelling information such as the
distance and duration you have travelled, and your
average and maximum speeds.
The application must receive positioning information
from at least four satellites to be used as a travelling
aid.
Cyan Magenta Yellow Black
53
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Use GPS data
To check the signal strength of the satellites that
provide the positioning information necessary for
navigation, open any of the three views and select
OptionsSatellite status.
To set a landmark or location as the destination of your
trip, select NavigationOptionsSet
destination. You can also enter the destination
latitude and longitude coordinates.
To remove the destination set for your trip, select
NavigationOptionsStop navigation.
To save your current position as a landmark, select
Navigation or Position, and OptionsSave
position.
To activate the trip meter, select Trip dist.
OptionsStart. To stop the trip meter, select
OptionsStop.
Landmarks
Select MenuGPSLandmarks.
Landmarks are coordinates to geographic locations
that you can save to your device for later use in
different location-based services. You can create
landmarks using the internal GPS receiver of your
device or network (network service).
Create a landmark
To create a landmark, select OptionsNew
landmark. Select Current position to make a network
request for the latitude and longitude coordinates of
your current location, Use map to select the location
from a map, or Enter manually to fill in necessary
location information such as a name, category,
address, latitude, longitude, and altitude.
To show the landmark on the map, select Options
Show on map.
To reset all fields and start calculating the trip again,
select Trip dist.OptionsRestart.
To change the measuring system in use, select
OptionsSettingsMeasurement system
Metric or Imperial.
54
To enter the altitude calibration to correct the altitude
received from the positioning satellites, select
OptionsSettingsAltitude calibration.
Cyan Magenta Yellow Black
Nokia Office Tools
Nokia Office Tools support mobile business and enable
effective communication with work teams.
To send the note using a text message, multimedia
message, e-mail, Bluetooth, or infrared, select
OptionsSend.
Active notes
To link a note to a contact, select OptionsLink note
to callAdd contacts. You can see the note on the
display of your device when making a call to or
receiving a call from the contact.
Select MenuOfficeActive notes.
Active notes allows you to create, edit, and view
different kinds of notes, for example, meeting memos,
hobby notes, or shopping lists. You can insert images,
videos, and sound in the notes. You can link notes to
other applications, such as Contacts, and send notes to
others.
To create a note, start writing.
To edit a note, scroll to it, and press the scroll key.
To insert images, sound clips, video, business cards,
web bookmarks, and files, select OptionsInsert
object.
To add new items to the note, select OptionsInsert
new. You can record sound and video clips, and capture
images.
To add boldface, italics, or underlining to your text or
change the font colour, press and hold the shift key and
use the scroll key to select the text. Then select
OptionsText.
Calculator
Select MenuOfficeCalculator.
This calculator has limited accuracy and is designed for
simple calculations.
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract
from the function map. Enter the second number of the
calculation, and select =. The calculator performs
operations in the order they are entered. The result of
the calculation remains in the editor field and can be
used as the first number of a new calculation.
The device saves the result of the last calculation in its
memory. Exiting the Calculator application or
switching off the device does not clear the memory. To
recall the last saved result the next time you open the
Calculator application, select OptionsLast result.
Cyan Magenta Yellow Black
55
To save the numbers or results of a calculation, select
OptionsMemorySave.
Quickoffice
To retrieve the results of a calculation from the memory
and use them in a calculation, select Options
MemoryRecall.
Select MenuOfficeQuickoffice.
Quickoffice consists of Quickword for Microsoft Word,
Quicksheet for Microsoft Excel, Quickpoint for Microsoft
PowerPoint, and Quickmanager for purchasing
software. You can view Microsoft Office 2000, XP, and
2003 documents (*.doc, *.xls, and *.ppt) with
Quickoffice. If you have the editor version of
Quickoffice, you can also edit files.
All file formats or features are not supported.
File manager
Select MenuOfficeFile mgr..
With File manager, you can manage the contents and
properties of files and folders on your device memory
and memory card. You can open, create, move, copy,
rename, send, and search for files and folders.
Copyright protection may prevent sending some files.
Open the device tab or the memory card tab.
To select multiple files, scroll to each file, and select
OptionsMark/UnmarkMark.
To send the selected files, select OptionsSend.
To move or copy files or folders to another folder, select
OptionsMove to folder or Copy to folder. Default
folders such as Sound clips in Gallery cannot be moved.
To search for files, select OptionsFind. Enter the
search text, and press the scroll key. The folders and
files whose names contain the search text are
displayed.
56
To view information about the selected file, select
OptionsDetails. To view additional information
about the file online, select OptionsAdditional
details.
Work with files
To open a file, scroll to it, and press the scroll key.
To sort files according to the type, select Options
Sort by.
To view the details of a file, select Options
Details. The details include the name, size and location
of the file, and the time and date when the file was last
modified.
To send files to a compatible device, select Options
Send and the sending method.
Converter
Select MenuOfficeConverter.
The converter has limited accuracy, and rounding
errors may occur.
Cyan Magenta Yellow Black
Convert measurements
1. Scroll to the Type field, and select Options
Conversion type to open a list of measures. Select
the measure to use, and select OK.
2. Scroll to the first Unit field, and select Options
Select unit. Select the unit from which to convert,
and select OK. Scroll to the next Unit field, and
select the unit to which to convert.
3. Scroll to the first Amount field, and enter the value
to convert. The other Amount field changes
automatically to show the converted value.
Set base currency and
exchange rate
When you change base currency, you must enter new
exchange rates because all previously set exchange
rates are cleared.
Before you can make currency conversions, you must
choose a base currency and add exchange rates. The
rate of the base currency is always 1. The base currency
determines the conversion rates of the other
currencies.
1. To set the rate of exchange for the unit of currency,
scroll to the Type field, and select Options
Currency rates.
2. Scroll to the currency type and enter the exchange
rate you would like to set per single unit of
currency.
3. To change the base currency, scroll to the currency,
and select OptionsSet as base currency.
4. Select DoneYes to save the changes.
After you have inserted all the necessary exchange
rates, you can make currency conversions.
Zip manager
Select MenuOfficeZip.
With Zip manager, you can create new archive files to
store compressed ZIP formatted files; add single or
multiple compressed files or directories to an archive;
set, clear, or change the archive password for protected
archives; and change settings, such as compression
level, and file name encoding.
You can store the archive files on the device memory
or on a memory card.
PDF reader
Select MenuOfficeAdobe Reader.
With PDF reader you can read PDF documents on the
display of your device; search for text in the
documents; modify settings, such as zoom level and
page views; and send PDF files using e-mail.
Printing
You can print documents, such as files, messages, or
web pages, from the device, preview a print job, define
page layout options, select a printer, or print to a file.
You may not be able to print all types of documents.
Cyan Magenta Yellow Black
57
To configure a printer for your device, select Menu
OfficePrintersOptionsAdd. To set the
printer as the default printer, select Options
Printing optionsPrinters, scroll to the printer and
select OptionsSet as default.
Before you print, make sure your device is properly
connected to the printer.
To print a document, select OptionsPrinting
optionsPrint.
To print to a file, select OptionsPrinting
optionsPrintPrint to file, and determine the
location for the file.
To change the printing options, select Options
Printing options. You can select the printer you want
to use, the number of copies and the range of pages
you want to print.
To change the page layout before printing, select
OptionsPrinting optionsPage setup. You can
change the paper size and orientation, define the
margins, and insert a header or a footer. The maximum
length of the header and footer is 128 characters.
To preview a file or message before you print, select
OptionsPrinting optionsPreview.
Open the alarm clock tab.
To set an alarm, select OptionsSet alarm. When an
alarm is active,
is displayed.
To switch off the alarm, select Stop, or to stop the
alarm for 5 minutes, select Snooze. If the alarm time
is reached while the device is switched off, the device
switches itself on and starts sounding the alarm tone.
If you select Stop, the device asks whether you want
to activate the device for calls. Select No to switch off
the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To change the alarm time, select OptionsReset
alarm.
To remove the alarm, select OptionsRemove
alarm.
Clock settings
Select OptionsSettings.
To change the time or date, select Time or Date.
To change the clock shown on the home screen, select
Clock typeAnalogue or Digital.
Clock
58
Alarm clock
Select MenuOfficeClock.
In Clock, you can view your local time and time zone
information, set and edit alarms, or modify date and
time settings.
To allow the mobile phone network to update the time,
date, and time zone information to your device
(network service), select Network operator time
Auto-update.
To change the alarm tone, select Clock alarm tone.
Cyan Magenta Yellow Black
Notes
Select MenuOfficeNotes.
You can create and send notes to other compatible
devices, and save received plain text files (.txt format)
to Notes.
To write a note, start entering the text. The note editor
opens automatically.
To open a note, scroll to it, and press the scroll key.
To send a note to other compatible devices, select
OptionsSend.
To synchronise or to define synchronisation settings
for a note, select OptionsSynchronisation. Select
Start to initialise synchronisation or Settings to define
the synchronisation settings for the note.
59
Cyan Magenta Yellow Black
Media
Your device contains a variety of media applications for
both business and leisure time use.
Camera
Select MenuMediaCamera.
The toolbar provides you with shortcuts to different
items and settings before and after capturing an image
or recording a video. Scroll to a toolbar item and press
the scroll key.
Switch between the video mode and the image
mode.
Select the scene.
Capture an image
Select the flash mode (images only).
Your device supports an image capture resolution of
up to 2048 x 1536 pixels. The image resolution in this
guide may appear different.
Activate the self-timer (images only).
To capture an image, use the display as a viewfinder
and press the scroll key. The device saves the image in
Gallery.
To capture an image, use the display as a viewfinder
and press the capture key. The device saves the image
in Gallery.
To zoom in or out before capturing an image, scroll up
or down. This function is available only when the
toolbar is not shown.
To focus on the subject before capturing the image,
press the T key.
60
Activate the sequence mode (images only).
Select a colour effect.
Show or hide the viewfinder grid (images only).
Adjust the white balance.
Adjust the exposure compensation (images only).
The available options vary depending on the capture
mode and view you are in. The settings return to the
default after you close the camera.
To view the toolbar before and after capturing an
image or recording a video, select OptionsShow
icons.
To view the toolbar only when you need it, select
OptionsHide icons.
Cyan Magenta Yellow Black
To activate the toolbar when it is hidden, scroll left. The
toolbar is visible for 5 seconds.
Define the connection and downloading settings
before using the application. Select Options
SettingsConnection and Download.
Record videos
To search for new podcast episodes to subscribe to,
select Directories.
1. If the camera is in the image mode, select the video
mode from the toolbar.
2. To start recording, press the capture key.To start
recording, press the scroll key.
3. To pause recording at any time, select Pause. Select
Continue to resume recording.
4. To stop recording, select Stop. The video clip is
automatically saved in Gallery. The maximum
length of the video clip depends on the available
memory.
Nokia Podcasting
To search for podcasts using keywords and podcast
show titles, select Search.
To display the available episodes from the selected
podcast, open the Podcasts folder and select Open.
To download the selected episode, select Download.
To play the downloaded episode, select Play.
To update the selected podcast or marked podcasts, for
a new episode, select OptionsUpdate.
To open the web site of the podcast (network service),
select OptionsOpen web page.
Select MenuMediaPodcasting.
Download podcasts to your device and listen them.
Some podcasts provide the opportunity to interact
with the creators by commenting and voting. To
connect to the internet to do this, select Options
View comments.
Play and manage podcasts
Search podcasts
Podcasting delivers audio or video content over the
internet for playback on mobile devices and PCs.
With the Nokia Podcasting application, you can search,
discover, subscribe, and download podcasts over the
air; and play, manage, and share podcasts with your
device.
Search helps you find podcasts by keyword or title.
The search engine uses the podcast search service you
set up in PodcastingOptionsSettings
ConnectionSearch service URL.
To search for podcasts, select Search, and enter the
desired keywords.
61
Cyan Magenta Yellow Black
Tip: Search looks for podcast titles and keywords
in descriptions, not specific episodes. General
topics, such as football or hip-hop, usually give
better results than a specific team or artist.
To subscribe to selected channels and add them to your
podcasts, select Subscribe.
To start a new search, select OptionsNew search.
To see the details of a podcast, select Options
Description.
Music player
62
Play a song or a podcast
episode
To add all available songs and podcasts to the music
library, select OptionsRefresh.
To play a song or a podcast episode, select Music or
Podcasts and the desired category, then scroll to the
song or podcast episode and press the scroll key.
To pause playback, press the scroll key; to resume,
press the scroll key again. To stop playback, scroll
down.
To fast forward or rewind, press and hold the scroll key
to the right or left.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Select MenuMediaMusic player.
Music player supports files formats such as AAC, AAC+,
eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is a method for delivering audio
or video content over the internet using either RSS or
Atom technologies for playback on mobile devices and
PCs.
You can transfer music from other compatible devices
to your device. See "Transfer music from PC", p. 63.
To go to the next item, scroll right. To return to the
beginning of the item, scroll left. To skip to the previous
item, scroll left again within 2 seconds after a song or
podcast has started.
To modify the tone of the music playback, select
OptionsEqualiser.
To modify the balance and stereo image or to enhance
bass, select OptionsAudio settings.
To view a visualisation during playback, select
OptionsShow visualisation.
To return to the home screen and leave the player
playing in the background, press the end key.
Playlists
To view and manage playlists, select Music
Playlists.
Cyan Magenta Yellow Black
To create a new playlist, select OptionsCreate
playlist.
Share online
To add songs to the playlist, select the song and
OptionsAdd to a playlistSaved playlist or New
playlist.
Select MenuMediaShare online.
You can share images and video clips in compatible
online albums, blogs, or in other compatible online
sharing services on the web. You can upload content,
save unfinished posts as drafts and continue later, and
view the content of the albums. The supported content
types may vary depending on the service provider.
To share files online, you must have an account with
an online image sharing service. You can usually
subscribe to such a service on the web page of your
service provider. Contact your service provider for more
information.
To reorder songs in a playlist, scroll to the song you
want to move, and select OptionsReorder list.
Nokia Music Store
Select MenuMediaMusic store.
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you need to register
for the service.
To check the Nokia Music Store availability in your
country, visit www.nokia.com/music.
To find more music in the different categories, select
OptionsFind in Music store.
To select the access point to use with the Music Store,
select Default acc. pt..
Transfer music from PC
To transfer music from your PC, connect your device to
the PC with a compatible USB data cable or Bluetooth
connectivity. If you are using the USB cable, select Mass
storage as the connection mode. Make sure that a
compatible memory card is inserted in the device.
You can also use Windows Media Player to synchronise
music between your device and PC.
Share images online
To upload a file from Gallery to the online service, select
MenuGallery, select the desired file and Options
SendPost to web.
Recorder
Select MenuMediaRecorder.
With Recorder, you can record up to 60 minutes of a
voice memo, save the voice recording as a sound clip,
and play the sound clip. Recorder supports the AMR file
format.
Cyan Magenta Yellow Black
63
View images
Gallery
Select MenuMediaGallery.
Use Gallery to access and use different types of media,
including images, videos, music, and sounds. All
viewed images and videos, and all received music and
sounds are automatically saved to Gallery. Sound clips
are opened in the Music player, and video clips and
streaming links in the RealPlayer application. Images
are opened in the image viewer.
Work with media files and
folders
To open the next or previous image for viewing, scroll
right or left.
To enlarge the image on the display, select Options
Zoom in. To reduce the image on the display, select
Zoom out.
To view the image in full screen size, select Options
Full screen. To return to normal view, select Options
Normal screen.
To open a file or a folder, scroll to it, and press the scroll
key.
To rotate the image, select OptionsRotate. Select
Right to rotate the image clockwise by 90 degrees, or
select Left to rotate the image counterclockwise by 90
degrees.
To create a new folder, select a file and then select
OptionsOrganiseNew folder. You cannot
create folders within folders.
RealPlayer
To copy or move files, select a file and Options
OrganiseMove to folder, New folder, Move to
memory card, Copy to memory card, Copy to phone
mem., or Move to phone mem..
To download files into Gallery using the browser, select
Downl. graphics, Downld. videos, Downld. tracks,
or Downld. sounds. The browser opens, and you can
choose a bookmark or enter the address for the
download site.
64
To open an image for viewing, select Options
Open.
Select MenuMediaRealPlayer.
RealPlayer plays video clips and audio files that are
stored in the device memory or on a memory card,
transferred to your device from an e-mail message or
a compatible computer, or streamed to your device
over the web. Supported formats include MPEG-4, MP4
(not streaming), 3GP, RV, RA, AMR, and Midi. RealPlayer
does not necessarily support all variations of a media
file format.
To search for a file, select OptionsFind. Write the
item you are searching for. Files that match the search
are shown.
Cyan Magenta Yellow Black
Play video clips and stream
links
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To play a video clip or audio file, select Options
OpenMost recent clips to play one of the six clips
you most recently played, or Saved clip to play a clip
or open a web link. Select Play.
To play streaming media, select a web link that points
to a clip, and select Play; or connect to the web, browse
to a video clip or audio file, and select Play. RealPlayer
recognises two kinds of links: an rtsp:// URL and an
http:// URL that points to a RAM file. Before the content
begins streaming, your device must connect to a web
site and buffer the content. If a network connection
problem causes a playback error, RealPlayer attempts
automatically to reconnect to the internet access point.
To adjust the volume during playback, use the volume
keys.
To fast-forward during playback, scroll up and hold. To
rewind during play, scroll down and hold.
To stop the playback or streaming, select Stop.
Buffering or connecting to the streaming site stops, the
playback of the clip stops, and the clip rewinds to the
beginning.
To download video clips from the web, select
OptionsDownload videos.
To view the video clip in full-screen size, select
OptionsPlay in full screen. Full screen increases
the size of the video to cover the maximum video area
possible while the aspect ratio is maintained.
Tip: To switch between the normal screen and
full screen quickly, press 2 on the keypad.
Flash player
Select MenuMediaFlash Player.
With Flash player, you can view, play, and interact with
flash files made for mobile devices.
Radio
Select MenuMediaRadio.
The quality of the radio broadcast depends on the
coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. Attach a compatible headset
or enhancement to the device for the FM radio to
function properly.
Listen to the radio
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Cyan Magenta Yellow Black
65
2. Select the location nearest to you from the station
directory. If your device finds a station that matches
the tuned frequency, its visual service ID is
displayed. To view the visual content, select OK.
To search for a station, select
or
. To set the
frequency manually, select OptionsManual
tuning.
To view available stations based on location, select
OptionsStation directory (network service).
To save the current station to your station list, select
OptionsSave station.
To select a previously saved radio station, select
or
To adjust the volume, use the volume keys.
To switch from headset use to listening to the radio
through the loudspeaker, select OptionsActivate
loudspeaker.
To return to the home screen and leave the FM radio
playing in the background, select OptionsPlay in
background.
View visual content
66
To check availability and costs, and to subscribe to the
service, contact your service provider.
Before you can view visual content, you must have an
internet access point defined at MenuTools
SettingsConnectionAccess points.
1. To view available visual content for a tuned station,
select OptionsStart visual service. If the visual
radio service ID has not been saved for the station,
enter it, or select Retrieve to search for it in the
station directory (network service).
Cyan Magenta Yellow Black
Personalisation
You can personalise your device by adjusting the
various tones, background images, and screen savers,
for example.
or from restarting the GPS or FM radio, so comply with
any applicable safety requirements when establishing
and using these features.
Profiles
To delete a profile that you created, select Options
Delete profile. You cannot delete the predefined
profiles.
Select MenuToolsProfiles.
You can adjust and customise the ringing tones, alert
tones, and other device tones for different events,
environments, or caller groups. The profile currently in
use is shown at the top of the display on the home
screen. However, if the active profile is General, only
today's date is shown.
To create a new profile, select OptionsCreate
new, and define the settings.
To customise a profile, select a profile and Options
Personalise.
To change a profile, select a profile and Options
Activate. The Offline profile prevents your device from
accidentally switching on, sending or receiving
messages, or using wireless LAN, Bluetooth, GPS, or FM
radio; it also closes any internet connection that may
be in operation when the profile is selected. The Offline
profile does not prevent you from establishing a
wireless LAN or Bluetooth connection at a later time,
Select ringing tones
To set a ringing tone for a profile, select Options
PersonaliseRinging tone. Select a ringing tone
from the list, or select Download sounds to open a
bookmark folder containing a list of bookmarks for
downloading tones using the browser. Any
downloaded tones are saved to Gallery.
To play the ringing tone for a selected contact group
only, select OptionsPersonaliseAlert for, and
select the desired group. Phone calls coming from
outside that group have a silent alert.
To change the message tone, select Options
PersonaliseMessage alert tone.
Cyan Magenta Yellow Black
67
Personalise the home
screen
To change the background image of the home screen,
select the Wallpaper folder.
To select an image or write a text for the screen saver,
select the Power saver folder.
Select MenuToolsModes.
To change the name of the current home screen, select
Mode name.
To select which applications and notifications you
want to see on the home screen, select Home screen
plug-ins.
To change the theme of the home screen currently in
use, select Theme.
To change the background image of the home screen
currently in use, select Wallpaper.
To change from one home screen to another, select
Switch mode.
Change the display
theme
Select MenuToolsThemes.
To change the theme used in all applications, select the
General folder.
To change the theme used in the main menu, select the
Menu view folder.
68
To change the theme for a particular application, select
the application-specific folder.
Cyan Magenta Yellow Black
Connectivity
Your device offers several options to connect to the
internet, a corporate intranet, or to another device or
computer.
Fast downloading
High-speed downlink packet access (HSDPA, also called
3.5G, indicated by
) is a network service in UMTS
networks and provides high-speed data downloads.
When HSDPA support in the device is activated and the
device is connected to a UMTS network that supports
HSDPA, downloading data such as messages, e-mail,
and browser pages through the cellular network may
be faster. An active HSDPA connection is indicated by
. The icon may vary between regions.
To activate or deactivate HSDPA, select Menu
ToolsSettingsConnectionPacket data
High speed packet access. Some cellular networks do
not allow incoming voice calls when HSDPA is active, in
which case you need to deactivate HSDPA to receive
calls. Contact your network operator for details.
For availability and subscription to data connection
services, contact your service provider.
HSDPA only affects the download speed; sending data
to the network, such as messages and e-mail, is not
affected.
Data cable
Transfer data between your device and a PC
1. Insert a memory card to your device and connect
the device to a compatible PC with the USB data
cable.
2. When the device asks which mode is used, select
Mass storage. In this mode, you can see your
device as a removable hard drive in your computer.
3. End the connection from the computer (for
example, from an Unplug or Eject Hardware wizard
in Windows) to avoid damaging the memory card.
To use Nokia PC Suite with your device, install Nokia PC
Suite on your PC, connect the data cable, and select PC
Suite.
To use your device to connect your PC to the web,
connect the data cable, and select Connect PC to Net.
To synchronise the music in your device with Nokia
Music Player, install the Nokia Music Player software on
your PC, connect the data cable, and select Media
transfer.
To change the USB mode you normally use with the
data cable, select MenuConnectivityUSB
USB connection mode and the desired option.
Cyan Magenta Yellow Black
69
To set the device to ask for the mode each time you
connect the USB data cable to the device, select
MenuConnectivityUSBUSB connection
modeAsk on connectionYes.
Bluetooth
Select MenuConnectivityBluetooth.
About Bluetooth
Bluetooth technology enables wireless connections
between electronic devices within a range of 10 metres
(33 feet). A Bluetooth connection can be used to send
images, videos, text, business cards, calendar notes, or
to connect wirelessly to devices that use Bluetooth
technology.
Since devices using Bluetooth technology
communicate using radio waves, your device and the
other devices do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of
10 metres of each other, although the connection can
be subject to interference from obstructions such as
walls or other electronic devices.
Several Bluetooth connections can be active at a time.
For example, if your device is connected to a headset,
you can also transfer files to another compatible device
at the same time.
Features using Bluetooth technology increase the
demand on battery power and reduce the battery life.
70
Send and receive data with
Bluetooth
1. When you activate Bluetooth for the first time, you
are asked to give a name to your device. Give your
device a unique name to make it easy to recognise
if there are several Bluetooth devices in the vicinity.
2. Select BluetoothOn.
3. Select My phone's visibilityShown to all or
Define period. If you select Define period, you
need to define the time during which your device
is visible to others. Your device and the name you
entered can now be seen by other users with
devices using Bluetooth technology.
4. Open the application where the item you want to
send is stored.
5. Select the item, and select OptionsSendVia
Bluetooth. The device searches for other devices
using Bluetooth technology within range and lists
them.
Tip: If you have sent data using Bluetooth
before, a list of the previous search results is
displayed. To search for more Bluetooth
devices, select More devices.
6. Select the device with which you want to connect.
If the other device requires pairing before data can
be transmitted, you are asked to enter a passcode.
When the connection has been established, Sending
data is shown.
The Sent folder in the Messaging application does not
store messages sent using Bluetooth connectivity.
Cyan Magenta Yellow Black
To receive data using Bluetooth, select Bluetooth
On and My phone's visibilityShown to all to
receive data from a non-paired device or Hidden to
receive data from a paired device only. When you
receive data through Bluetooth, a tone sounds, and you
are asked if you want to accept the message in which
the data is included. If you accept, the message is
placed in the Inbox folder in the Messaging application.
Tip: You can access the files in the device or on
the memory card using a compatible accessory
that supports the File Transfer Profile Client
service (for example, a laptop computer).
A Bluetooth connection is disconnected automatically
after sending or receiving data. Only Nokia PC Suite and
some enhancements such as headsets may maintain a
connection even if not actively used.
Pair devices
Open the paired devices tab.
Before pairing, create your own passcode (1-16 digits),
and agree with the user of the other device to use the
same code. Devices that do not have a user interface
have a fixed passcode. You need the passcode only
when you connect the devices for the first time. After
pairing, it is possible to authorise the connection.
Pairing and authorising the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote SIM access must have 16
digits.
1. Select OptionsNew paired device. The device
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth before, a list
of the previous search results is displayed. To search
for more Bluetooth devices, select More devices.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes to make the connection between your
device and the other device automatic, or No to
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
OptionsAssign short name. The nickname is only
displayed in your device.
To delete a pairing, select the device whose pairing you
want to delete and OptionsDelete. To delete all
pairings, select OptionsDelete all. If you are
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select Set as authorised. Connections
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or computer,
or devices that belong to someone you trust. If you
want to accept connection requests from the other
device separately every time, select Set as
unauthorised.
Cyan Magenta Yellow Black
71
To use a Bluetooth audio enhancement such as a
Bluetooth handsfree or headset, you need to pair your
device with the enhancement. See the enhancement
user guide for the passcode and further instructions.
To connect to the audio enhancement, switch on the
enhancement. Some audio enhancements connect
automatically to your device. Otherwise open the
paired devices tab, scroll to the enhancement, and
select OptionsConnect to audio device.
Security tips
When you are not using Bluetooth connectivity, select
BluetoothOff or My phone's visibility
Hidden.
Do not pair with an unknown device.
Wireless LAN
Your device can detect and connect to a wireless local
area network (WLAN). To use WLAN, a network must be
available in the location and your device must be
connected to it.
WLAN connections
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorised access to your data.
To use WLAN, you must create an internet access point
in a WLAN. Use the access point for applications that
need to connect to the internet. A WLAN connection is
established when you create a data connection using
a WLAN access point. The active WLAN connection is
ended when you end the data connection. You can also
end the connection manually. See "Connection
manager", p. 74.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one WLAN
access point device at a time, but several applications
can use the same internet access point.
When the device is in the Offline profile, you can still
use WLAN, if available. Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
If you move the device to another location within the
WLAN and out of range of a WLAN access point, the
roaming functionality can automatically connect your
device to another access point that belongs to the same
WLAN. As long as you remain within range of access
points that belong to the same network, your device
can stay connected to the network.
Tip: To check the unique media access control
(MAC) address that identifies your device, for
example to configure the MAC address of your
device to a WLAN router, enter *#62209526# on
the device keypad. The MAC address is shown on
the device display.
72
Cyan Magenta Yellow Black
See WLAN availability
Use the wizard on the home screen
To have your device show WLAN availability, select
MenuToolsSettingsConnection
Wireless LANShow WLAN availability.
On the home screen, the WLAN wizard shows the status
of your WLAN connections and network searches. To
view the available options, scroll to the row showing
the status, and press the scroll key. Depending on the
status, you can start the Web browser using a WLAN
connection, connect to your net call service, disconnect
from a WLAN, search for WLANs, or set the network
scanning on or off.
If WLAN is available,
is shown on the display.
Tip: You can also scan for networks in range.
WLAN wizard
Select MenuConnectivityWLAN wiz..
The WLAN wizard helps you find and connect to a
wireless LAN. When you open the application, your
device starts to scan for available WLANs and lists them.
To update the list of available WLANs, select Options
Refresh.
To start or continue browsing the web using the access
point of the WLAN, scroll to the desired network, and
select OptionsStart Web browsing or Cont. Web
browsing.
To disconnect the active connection to the WLAN, select
OptionsDisconnect WLAN.
To view the details of the WLAN, select Options
Details.
To save the access point of the WLAN, select Options
Define access point.
Always enable one of the available encryption methods
to increase the security of your WLAN connection. Using
encryption reduces the risk of unauthorised access to
your data.
If WLAN scanning is off and you are not connected to
any WLAN, WLAN scanning off is displayed on the
home screen. To set scanning on and search for
available WLANs, scroll to the row showing the status,
and press the scroll key.
To start a search for available WLANs, scroll to the row
showing the status, press
the scroll key, and select
Search for WLAN. To set
WLAN scanning off, scroll to
the row showing the status,
press the scroll key, and
select Switch WLAN scan
off.
When Start Web
browsing or Use for is
selected, the WLAN wizard
automatically creates an
access point for the selected
WLAN. The access point can also be used with other
applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter
the relevant passcodes. To connect to a hidden
Cyan Magenta Yellow Black
73
network, you must enter the correct service set
identifier (SSID).
To use the found WLAN for a net call connection, scroll
to the row showing the status, and press the scroll key.
Select Use for, the desired net call service, and the
WLAN to be used.
Modem
Select MenuConnectivityModem.
Together with a compatible computer, you can use
your device as a modem to connect to the web, for
example.
Before you can use your device as a modem
ವ You need an appropriate data communications
software on your computer, such as Nokia PC Suite.
For more information, see the Nokia PC Suite guide.
ವ You must subscribe to the appropriate network
services from your service provider or internet
service provider.
ವ You must have the appropriate drivers installed on
your computer. You must install drivers for the cable
connection, and you may need to install or update
Bluetooth or infrared drivers.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared
ports of the device and computer are directly facing
each other with no obstacles between them.
74
To connect your device to a computer using Bluetooth
wireless technology, initiate the connection from the
computer. To activate Bluetooth in your device, select
MenuConnectivityBluetooth and select
BluetoothOn.
If you use a cable to connect your device to a computer,
initiate the connection from the computer.
You may not be able to use some of the other
communication features when the device is used as a
modem.
Connection manager
Select MenuConnectivityConn. mgr..
View and end active
connections
To see the open data connections, select Active data
connections.
To view detailed information about network
connections, select a connection from the list and
OptionsDetails. The type of information shown
depends on the connection type.
To end the selected network connection, select
OptionsDisconnect.
To end all active network connections simultaneously,
select OptionsDisconnect all.
Search for WLAN
To search for WLANs available within range, select
Available WLAN networks. The available WLANs are
Cyan Magenta Yellow Black
listed with their network mode (infrastructure or adhoc), signal strength, and network encryption
indicators, and whether your device has an active
connection with the network.
To view the details of a network, scroll to it, and press
the scroll key.
To create an internet access point for a network, select
OptionsDefine access point.
75
Cyan Magenta Yellow Black
Security and data management
Manage the data and software on your device, and take
care of the security of the device and its contents.
Important: Your device can only support one
antivirus application. Having more than one
application with antivirus functionality could affect
performance and operation or cause the device to stop
functioning.
Lock the device
Important: If the device has been locked, enter the
lock code to activate the phone function. When the
device is locked, calls may be possible to the official
emergency number. Making an emergency call in the
offline profile or when the device is locked requires
that the device recognise the number to be an official
emergency number. It is advisable to change the
profile or unlock the device by entering the lock code
before you make the emergency call.
76
To prevent access to the contents of your device, lock
the device when in home screen. Press the power key,
select Lock phone, and enter your lock code. The
default lock code is 12345. To unlock, press the left
selection key, enter your lock code, and press the scroll
key.
To change the lock code, select MenuTools
SettingsGeneralSecurityPhone and SIM
cardLock code. Enter the old code and then the
new code twice. The new code can be 4-255 characters
long. Both alphabets and digits can be used, and both
uppercase and lowercase alphabets are possible.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking and
to define the text for the message, select Menu
ToolsSettingsGeneralSecurityPhone
and SIM cardAllow remote lockYes. Enter the
remote lock message and confirm the message. The
message must be at least 5 characters long.
Memory card security
Select MenuToolsMemory.
You can protect a memory card with a password to
prevent unauthorised access. To set a password, select
OptionsSet password. The password can be up to
8 characters long and is case-sensitive. The password
is stored in your device. You do not need to enter it
again while you use the memory card on the same
device. If you use the memory card on another device,
you are asked for the password. Not all memory cards
support password protection.
Cyan Magenta Yellow Black
To remove the memory card password, select
OptionsRemove password. When you remove the
password, the data on the memory card is not
protected against unauthorised use.
To open a locked memory card, select Options
Unlock memory card. Enter the password.
If you cannot recall the password to unlock a locked
memory card, you may reformat the card, in which case
the card is unlocked and password removed.
Formatting a memory card destroys all data stored on
the card.
Encryption
Select MenuToolsEncryption.
Encrypt your device or memory card to prevent
outsiders from accessing your important information.
Encrypt device memory or
memory card
To encrypt the device memory, select Phone
memory.
To encrypt the memory card, select Memory card and
from the following:
ವ Encrypt without saving key — Encrypt the
memory card without saving the encryption key. If
you select this option, you cannot use the memory
card in other devices, and if you restore factory
settings, you cannot decrypt the memory card.
ವ Encrypt and save key — Encrypt the memory card
and save the key manually in the default folder. For
security, store the key to a safe place outside the
device. For example, you can send the key to your
computer. Enter a pass phrase for the key and a
name for the key file. The pass phrase should be long
and complex.
ವ Encrypt with restored key — Encrypt the memory
card with a key you have received. Select the key file,
and enter the pass phrase.
Decrypt device memory or
memory card
To decrypt the device memory, select Phone
memory.
To decrypt the memory card without destroying the
encryption key, select Memory cardDecrypt.
To decrypt the memory card and destroy the
encryption key, select Memory cardDecrypt and
turn off encryption.
Fixed dialling
Select MenuCommunic.ContactsOptions
SIM contactsFixed dial contacts.
With the fixed dialling service, you can restrict calls
from your device to certain phone numbers. Not all SIM
cards support the fixed dialling service. Contact your
service provider for more information.
Cyan Magenta Yellow Black
77
When fixed dialling is activated, calls may be possible
to the official emergency number programmed into
your device.
1. To restrict calls from your device, select Options
New SIM contact and enter the contact name and
phone number to the list of numbers to which calls
are allowed, or select Add from Contacts to copy
the contact from Contacts. To restrict calls by a
country prefix, enter the country prefix in the list of
numbers. All phone numbers to which calls are
allowed must start with this country prefix.
2. Select OptionsActivate fixed dialling. You
need your PIN2 code to activate and deactivate
fixed dialling or edit your fixed dialling contacts.
Contact your service provider if you do not have the
code. To cancel the service, select Options
Deactivate fixed dialling.
Tip: To send text messages to the SIM contacts
while the fixed dialling service is active, you
need to add the text message centre number to
the fixed dialling list.
Certificate manager
78
Select MenuToolsSettingsGeneral
SecurityCertificate management.
Digital certificates are used to verify the origins of
software but do not guarantee safety. There are four
different types of certificates: authority certificates,
personal certificates, trusted site certificates, and
device certificates. During a secure connection, a server
may send a server certificate to your device. Upon
receipt, it is checked through an authority certificate
stored in your device. You receive notification if the
identity of the server is not authentic or if you do not
have the correct certificate in your device.
Download a certificate from a web site, or receive a
certificate as an e-mail attachment, or as a message
sent through a Bluetooth or infrared connection.
Certificates should be used when you connect to an
online bank or a remote server to transfer confidential
information. They should also be used if you want to
reduce the risk of viruses or other malicious software,
and to check the authenticity of software when you
download and install software to your device.
Tip: When you add a new certificate, check its
authenticity.
View certificate details
You can only be sure of the correct identity of a server
when the signature and the validity period of a server
certificate have been checked.
To view certificate details, select View details.
One of the following notes may appear:
ವ Certificate not trusted — You have not set any
application to use the certificate. You may want to
change the trust settings.
ವ Expired certificate — The period of validity has
ended for the selected certificate.
ವ Certificate not valid yet — The period of validity
has not yet begun for the selected certificate.
ವ Certificate corrupted — The certificate cannot be
used. Contact the certificate issuer.
Cyan Magenta Yellow Black
Certificate trust settings
ವ Online certif. check — Online certificate status
protocol.
Trusting a certificate means that you authorise it to
verify web pages, e-mail servers, software packages,
and other data. Only trusted certificates can be used to
verify services and software.
Back up data
Important: Even if the use of certificates makes
the risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security.
The existence of a certificate does not offer any
protection by itself; the certificate manager must
contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or "Certificate
not valid yet" is shown, even if the certificate should
be valid, check that the current date and time in your
device are correct.
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to the
listed owner.
To change the trust settings, select a certificate and
OptionsTrust settings. Select an application field
and press the scroll key to select Yes or No. You cannot
change the trust settings of a personal certificate.
Depending on the certificate, a list of applications that
can use the certificate is displayed:
ವ Symbian installation — New Symbian operating
system application.
ವ Internet — E-mail and graphics.
ವ App. installation — New Java™ application.
It is recommended to back up device memory regularly
to the memory card or a compatible computer.
To back up information from the device memory to a
memory card, select MenuToolsMemory
OptionsBack up phone memory.
To restore information from the memory card to the
device memory, select MenuToolsMemory
OptionsRestore from card.
You can also connect your device to a compatible
computer and use Nokia PC Suite to back up data.
Application manager
Select MenuInstallationsApp. mgr..
You can install two types of applications and software
on your device:
ವ Applications and software specifically intended for
your device or compatible with the Symbian
operating system. These software installation files
have the extension .sis or .sisx.
ವ Java ME™ applications compatible with the Symbian
operating system. The Java application installation
file extensions are .jad or .jar.
Cyan Magenta Yellow Black
79
Installation files may be transferred to your device
from a compatible computer, downloaded during
browsing, or sent to you in a multimedia message, as
an e-mail attachment, or with Bluetooth.
During the installation, the device checks the integrity
of the package to be installed. The device shows
information about the checks being carried out, and
you are given options to continue or cancel the
installation.
If you install applications that require a network
connection, note that the power consumption of your
device may increase when you use these applications.
Tip: When browsing web pages, you can
download an installation file and install it
immediately. Note, however, that the
connection runs in the background during the
installation.
Install applications
Important: Only install and use applications and
other software from trusted sources, such as
applications that are Symbian Signed or have passed
the Java VerifiedTM testing.
To download and install software from the web, select
Download applications. Select the application and
OptionsInstall.
To view the details of an installed software package,
select the application and OptionsView details.
80
To view the installation log, select OptionsView
log. A list shows what software has been installed and
removed, and the date of the installation or removal.
If you encounter problems with the device after
installing a software package, use this list to find out
which software package may be the cause of the
problem. The information in this list may also help you
pinpoint problems that are caused by software
packages that are incompatible with each other.
To remove software, select OptionsRemove. If you
remove software, you can only reinstall it by using the
original software package file, or by restoring a full
backup that contains the removed software package.
If you remove a software package, you may no longer
be able to open files created with that software. If
another software package depends on the software
package that you removed, the other software package
may stop working. Refer to the documentation of the
installed software package for details.
Data synchronisation
Select MenuToolsSync.
With Sync, you can synchronise your contacts, calendar
entries, or notes with corresponding applications on a
compatible computer or remote internet server. Your
synchronisation settings are saved in a
synchronisation profile. The Sync application uses
SyncML technology for remote synchronisation. For
information on SyncML compatibility, contact the
supplier of the applications with which you want to
synchronise your device.
Cyan Magenta Yellow Black
You may receive the synchronisation settings as a
message from your service provider. The available
applications you can synchronise may vary. Contact
your service provider for more information.
Create a synchronisation
profile
There is a Nokia PC Suite synchronisation profile
available in your device. You do not need to edit it if
you synchronise your device with a computer using
Nokia PC Suite.
To create a new profile, select OptionsNew sync
profile and assign a name for the profile, select the
applications to synchronise with the profile, and
specify the needed connection settings. Contact your
service provider for details.
Mobile VPN
Select MenuToolsSettingsConnection
VPN.
The Nokia mobile virtual private network (VPN) client
creates a secure connection to compatible corporate
intranet and services, such as e-mail. Your device
connects from a mobile network, through the internet,
to a corporate VPN gateway that acts as a front door to
the compatible corporate network. VPN client uses IP
Security (IPSec) technology. IPSec is a framework of
open standards for supporting secure exchange of data
over IP networks.
VPN policies define the method used by the VPN client
and a VPN gateway to authenticate each other, and the
encryption algorithms that they use to help protect the
confidentiality of data. Contact your company's IT
department for a VPN policy.
To install and configure the VPN client, certificates, and
policies, contact the IT administrator of your
organisation.
Manage VPN
Select VPN, and from the following:
ವ VPN policies — Install, view, and update VPN
policies.
ವ VPN policy servers — Edit the connection settings
of VPN policy servers from which you can install and
update VPN policies. A policy server refers to a Nokia
Security Service Manager (NSSM), which is not
necessarily required.
ವ VPN log — View the log for your VPN policy
installations, updates and synchronisations, and
other VPN connections.
Create VPN access points
Select SettingsConnectionDestinations.
An access point is where your phone connects to the
network by way of WLAN or packet data connection. To
use e-mail and multimedia services or to browse web
pages you must first define internet access points for
these services. VPN access points pair VPN policies with
regular internet access points to create secure
connections.
Cyan Magenta Yellow Black
81
Your service provider may preset some or all access
points for your device, and you may not be able to
create, edit, or remove them.
Contact your company's IT department for the correct
settings.
Open a destination, select a VPN access point, select
Edit, and define the following:
ವ Connection name — Enter a name for the VPN
access point.
ವ VPN policy — Select the VPN policy to combine with
the internet access point.
ವ Internet access point — Select the internet access
point with which to combine the VPN policy to
create secure connections for data transfer.
ವ Proxy server address — Enter the proxy server
address of the private network.
ವ Proxy port number — Enter the proxy port
number.
Use a VPN connection in an
application
82
You may have to prove your identity when you log on
to the enterprise network. Contact your company's IT
department for the credentials.
To use a VPN connection in an application, the
application must be associated with a VPN access point.
Tip: You can configure the application's
connection setting to Always ask, in which case
you select the VPN access point from a list of
connections when a connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your
VPN user name and passcode or password. If the
SecurID token has become out of synchronisation
with the clock of the ACE/Server, enter the next
passcode. If you are using certificate-based
authentication, you may have to enter the key store
password.
Barcode reader
Select MenuToolsBarcode.
Use the Barcode reader application to decode different
types of barcodes. The codes may contain information
such as URL links, e-mail addresses, and phone
numbers. The Barcode reader uses the camera in your
device to scan codes.
To scan a code, select Scan code, and set the code
between the red lines on the display. The decoded
information appears on the display.
To save the scanned data, select OptionsSave. The
data is saved in .bcr format.
To view previously saved, decoded information in the
main view, select Saved data.
Cyan Magenta Yellow Black
Settings
Select MenuToolsSettings.
You can define and modify various settings of your
device. Modifying these settings affects the operation
of your device across several applications.
Some settings may be preset for the device or sent to
you in a special message by your service provider. You
may not be able to change such settings.
Select the setting you want to edit to do the following:
ವ Switch between two values, such as on or off.
ವ Select a value from a list.
ವ Open a text editor to enter a value.
ವ Open a slider to decrease or increase the value by
scrolling left or right.
To adjust the length of time the display can be left idle
before the screen saver is activated, select Display
Power saver time-out.
General settings
Standby mode settings
Display settings
To define the level of light that the device needs before
switching on the backlight, select DisplayLight
sensor.
To change the text size, select DisplayFont size.
To select a welcome note or logo for the display, select
DisplayWelcome note / logo. You can either
choose the default welcome note, enter your own text,
or select an image.
To set how quickly the display dims after the last
keypress, select DisplayLight time-out.
Select MenuToolsSettingsGeneral.
To select whether to use the home screen, select
Standby modeHome screen.
Personalisation settings
To change the home screen mode settings, select
Standby modeMode settings.
Select MenuToolsSettingsGeneral
Personalisation.
To assign shortcuts for the device keys, select Standby
modeShortcuts. These shortcuts are not available
in the home screen.
Cyan Magenta Yellow Black
83
To select whether to show or hide the operator logo,
select Standby modeOperator logoOn or Off.
To select the language in which you write notes and
messages, select LanguageWriting language.
To select the mailbox that is shown in the home screen,
select Standby modeHome screen mailbox.
To select whether to use the predictive text input,
select LanguagePredictive text.
Tone settings
To define the settings for the predictive text input,
select Input settings.
To select a ringing tone for voice calls, select Tones
Ringing tone.
When you receive a message or miss a call, the scroll
key starts blinking to indicate the event.
To set the ringing type, select TonesRinging
type. You can also set the device to sound a ringing
tone that is a combination of the spoken name of the
caller and the selected ringing tone, when someone
from your contacts list calls you. Select TonesSay
caller's name.
To set the length of time you want the scroll key to
blink, select Notification lightBlink light for.
To set the volume level of the ringing tone, select
TonesRinging volume.
Select MenuToolsSettingsGeneral
PersonalisationOne-touch keys.
To set the various alert tones, select TonesMessage
alert tone, E-mail alert tone, Calendar alarm tone,
or Clock alarm tone.
To select which application and task is opened when
you press a One-touch key, select the key and
OptionsOpen.
To set the device to vibrate when you receive a call,
select TonesVibrating alert.
To restore the preset applications and tasks, select
Restore defaults.
To set the volume level of the device keypad tones,
select TonesKeypad tones.
To set the warning tones on or off, select Tones
Warning tones.
Language settings
84
Notification light
To select a ringing tone for video calls, select Tones
Video call tone.
To set the language used on the device display, select
LanguagePhone language.
To select of which events you want to be notified, select
Notification lightNotified events.
Settings for One-touch keys
Date and time settings
Select MenuToolsSettingsGeneralDate
and time.
To set the current date and time, select Date and
Time.
Cyan Magenta Yellow Black
To define your time zone, select Time zone.
To update the time, date, and time zone information
automatically (network service), select Network
operator timeAuto-update.
To select whether to use the 12-hour or 24-hour clock
system and with which symbol to separate hours and
minutes, select Time format and Time separator.
To determine the date format and separator, select
Date format and Date separator.
To define the clock type, select Clock type
Analogue or Digital.
To select the tone for the alarm clock, select Clock
alarm tone.
To determine the week days that are work days for you,
select Workdays.
Enhancement settings
Select MenuToolsSettingsGeneral
Enhancement.
Common enhancement settings
With most enhancements, you can do the following:
To determine which profile is activated when you
attach an enhancement to your device, select Default
profile.
To let the device answer phone calls automatically after
5 seconds when an enhancement is attached, select
Automatic answerOn. If the ringing type is set to
Beep once or Silent in the selected profile, the
automatic answer is disabled.
To illuminate the device while it is attached to an
enhancement, select LightsOn.
E-mail key settings
Select .
To select which mailbox to open with the e-mail key,
select E-mail key settingsE-mail key, and press
the scroll key.
Security settings
Select MenuToolsSettingsGeneral
Security.
Avoid using codes that are similar to emergency
numbers to prevent accidental dialling of the
emergency number. Codes are shown as asterisks.
When you change a code, enter the current code, then
the new code twice.
Device and SIM card security
To change the PIN code, select Phone and SIM card
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised
use and is provided with the SIM card. After three
consecutive incorrect PIN code entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can use the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM cardKeypad
autolock period.
Cyan Magenta Yellow Black
85
To set a time-out after which the device is
automatically locked and can be used only if the correct
lock code is entered, select Phone and SIM card
Phone autolock period. Enter a number for the timeout in minutes, or select None to set off the autolock
period. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the
official emergency number programmed into your
device.
To set a new lock code, select Phone and SIM card
Lock code. The preset lock code is 12345. Enter the
current code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and
digits can be used, and both uppercase and lowercase
alphabets are possible. The device notifies you if the
lock code is not properly formatted.
To set the device to ask for the lock code when an
unknown, new SIM card is inserted into your device,
select Phone and SIM cardLock if SIM card
changed. The device maintains a list of SIM cards that
are recognised as the owners cards.
Restore original settings
To restore the original device settings, select Factory
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
power on. Documents, contact information, calendar
entries, and files are unaffected.
86
Telephone settings
Call settings
To display your phone number to the person you are
calling, select CallSend my caller IDYes. To let
the network determine whether your caller ID is sent,
select Set by network.
To display your net call address to the person you are
calling using a net call, select CallSend my internet
call IDYes.
To be notified of a new incoming call while you have a
call in progress, select CallCall waiting
OptionsActivate. To check if the function is active
on the network, select OptionsCheck status.
To select whether net calls alert or not, select Call
Internet call alert. You are notified of missed net calls
with a notification.
To set the default call type, select CallDefault call
type and select Voice call if you make a GSM calls, or
Internet call if you make net calls.
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select CallReject call with
SMSYes. To set the text for the message, select
CallMessage text.
To set off the contact search on the home screen, select
CallContact searchOff.
Network settings
Select MenuToolsSettingsPhone
Network.
Select MenuToolsSettingsPhone.
Cyan Magenta Yellow Black
To select the network mode, select Network mode
and Dual mode, UMTS, or GSM. In the dual mode, the
device switches automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and
reduce the battery life. In regions close to both
GSM and UMTS networks, selecting Dual mode
may cause constant jumping between the two
networks, which also increases the demand on
battery power.
Some or all access points may be preset for your device
by your service provider, and you may not be able to
create, edit, or remove them.
To select the operator, select Operator selection and
Manual to choose from available networks, or
Automatic to have the device select the network
automatically.
Select MenuToolsSettingsConnection
Packet data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your
device in GSM and UMTS networks, it is possible to have
multiple data connections active at the same time;
access points can share a data connection, and data
connections remain active, for example, during voice
calls. See "Connection manager", p. 74.
To set the device to indicate when it is used in Micro
Cellular Network (MCN), select Cell info display
On.
Connection settings
Select MenuToolsSettingsConnection.
Access points
Select MenuToolsSettingsConnection
Access points.
An internet access point is a collection of settings,
which define how the device creates a data connection
to the network. To use e-mail and multimedia services
or to browse web pages, you must first define access
points for these services.
To create a new access point, select OptionsNew
access point or select an existing access point from the
list and then OptionsDuplicate access point to use
the access point as a basis for the new one.
Packet data (GPRS) settings
To define the packet data settings, select Packet data
connection and select When available to register the
device to the packet data network when you switch the
device on in a supported network, or When needed to
establish a packet data connection only when an
application or action requires it. Select Access point
and enter the access point name provided by your
service provider to use the device as a packet data
modem to your computer. To use a high-speed data
connection, select High speed packet access
Enabled.
These settings affect all access points for packet data
connections.
Cyan Magenta Yellow Black
87
WLAN settings
Select MenuToolsSettingsConnection
Wireless LAN.
To have an indicator displayed when there is a WLAN
available in your current location, select Show WLAN
availabilityYes.
To select the interval for your device to scan for
available WLANs and update the indicator, select Scan
for networks. This setting is not available unless you
select Show WLAN availabilityYes.
WLAN security settings
Select MenuToolsSettingsConnection
Access pointsOptionsNew access point, or
select an access point and OptionsEdit.
In the access point settings, select WLAN security
mode and the desired mode.
Session initiation protocol
(SIP) settings
88
Select MenuToolsSettingsConnection
SIP settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
To create a SIP profile, select OptionsNew SIP
profileUse default profile or Use existing
profile.
To select the SIP profile you want to use by default for
communication sessions, select OptionsDefault
profile.
Edit SIP profiles
Select OptionsEdit, and select from the following:
ವ Profile name — Enter a name for the SIP profile.
ವ Service profile — Select IETF or Nokia 3GPP.
ವ Default access point — Select the access point to
use for the internet connection.
ವ Public user name — Enter your user name received
from your service provider.
ವ Use compression — Select if compression is used.
ವ Registration — Select the registration mode.
ವ Use security — Select if security negotiation is
used.
ವ Proxy server — Enter the proxy server settings for
this SIP profile.
ವ Registrar server — Enter the registration server
settings for this SIP profile.
Net call settings
Select MenuToolsSettingsConnection
Internet tel..
To create a new net call profile, select OptionsNew
profile.
To edit an existing profile, select OptionsEdit.
Cyan Magenta Yellow Black
Configuration settings
Select MenuToolsSettingsConnection
Configurations.
You can receive messages from your service provider
or company information management containing
configuration settings for trusted servers. These
settings are automatically saved in Configurations.
You may receive configuration settings for access
points, multimedia, or e-mail services, and IM or
synchronisation settings from trusted servers.
name manually. To enable connections to an
operator-provided access point, create an empty
access point.
To remove access points from the list, select Options
Remove.
Application settings
Select MenuToolsSettingsApplications.
Select an application from the list to adjust its settings.
To delete configurations for a trusted server, select
OptionsDelete. The configuration settings for
other applications provided by this server are also
deleted.
Restrict packet data
Select MenuToolsSettingsConnection
APN control.
With the access point control service, you can restrict
packet data connections from your device to certain
access points only. Your SIM card may not support the
access point control service. Contact your service
provider for more information.
To restrict the packet data connections from your
device, select OptionsActivate restrictions. You
need your PIN2 code to activate and deactivate access
point control or to edit the packet data access points
on the control list.
To add access points that can be used for packet data
connections to the control list, select OptionsAdd
Cyan Magenta Yellow Black
89
Shortcuts
Here are some of the available keyboard shortcuts in
your device. Shortcuts can make the use of the
applications more efficient.
General shortcuts
General shortcuts
Power key
Press and hold to switch your device
on and off.
Press once to switch between
profiles.
Home screen
90
Left selection
key + function
key
Lock and unlock the keypad.
Call key
Open the call log.
Press and hold to open your home
page in the Web browser.
Press and hold to call your voice
mailbox.
touch dialing at MenuTools
SettingsPhoneCall
Speed diallingOn.
Web
Zoom in the page.
Zoom out the page.
Open the search dialog.
View the active pages.
View the page overview.
Open the dialog for entering a new
web address.
Open the bookmarks folder.
Number key (2– Call a phone number using 1-touch
9)
dialing. You must first activate 1-
Cyan Magenta Yellow Black
Enhancements
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer. When you disconnect the
power cord of any enhancement, grasp and pull the
plug, not the cord.
91
Cyan Magenta Yellow Black
Battery and charger information
Battery and charger
information
92
Your device is powered by a rechargeable battery. The
battery intended for use with this device is BP-4L. This
device is intended for use when supplied with power
from the following chargers: AC-5 . The battery can be
charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times
are noticeably shorter than normal, replace the
battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved
chargers designated for this device. Use of an
unapproved battery or charger may present a risk of
fire, explosion, leakage, or other hazard.
If a battery is being used for the first time or if the
battery has not been used for a prolonged period, it
may be necessary to connect the charger, then
disconnect and reconnect it to begin charging the
battery. If the battery is completely discharged, it may
take several minutes before the charging indicator
appears on the display or before any calls can be made.
Always switch the device off and disconnect the
charger before removing the battery.
Unplug the charger from the electrical plug and the
device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
Always try to keep the battery between 15°C and 25°C
(59°F and 77°F). Extreme temperatures reduce the
capacity and lifetime of the battery. A device with a hot
or cold battery may not work temporarily. Battery
performance is particularly limited in temperatures
well below freezing.
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object such as a
coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery.
(These look like metal strips on the battery.) This might
happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals
may damage the battery or the connecting object. .
Do not dispose of batteries in a fire as they may
explode. Batteries may also explode if damaged.
Dispose of batteries according to local regulations.
Please recycle when possible. Do not dispose as
household waste.
Do not dismantle, cut, open, crush, bend, deform,
puncture, or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact
Cyan Magenta Yellow Black
with the skin or eyes. In the event of such a leak, flush
your skin or eyes immediately with water, or seek
medical help.
Do not modify, remanufacture, attempt to insert
foreign objects into the battery, or immerse or expose
it to water or other liquids.
Improper battery use may result in a fire, explosion, or
other hazard. If the device or battery is dropped,
especially on a hard surface, and you believe the
battery has been damaged, take it to a service centre
for inspection before continuing to use it.
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged. Keep your
battery out of the reach of small children.
Nokia battery
authentication
guidelines
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from an authorised Nokia dealer, and
inspect the hologram label using the following steps:
Successful completion of the steps is not a total
assurance of the authenticity of the battery. If you have
any reason to believe that your battery is not an
authentic, original Nokia battery, you should refrain
from using it, and take it to the nearest authorised
Nokia service point or dealer for assistance. Your
authorised Nokia service point or dealer will inspect
the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1. When you look at the
hologram on the label, you
should see the Nokia
connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another
angle.
2. When you angle the hologram
left, right, down and up, you
should see 1, 2, 3 and 4 dots on
each side respectively.
What if your battery is not
authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorised Nokia service point or dealer for assistance.
The use of a battery that is not approved by the
manufacturer may be dangerous and may result in
poor performance and damage to your device and its
enhancements. It may also invalidate any approval or
warranty applying to the device.
Cyan Magenta Yellow Black
93
For additional information, refer to the warranty and
reference leaflet included with your Nokia device.
94
Cyan Magenta Yellow Black
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
ವ Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals
that will corrode electronic circuits. If your device
does get wet, remove the battery, and allow the
device to dry completely before replacing it.
ವ Do not use or store the device in dusty, dirty areas.
Its moving parts and electronic components can be
damaged.
ವ Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
ವ Do not store the device in cold areas. When the
device returns to its normal temperature, moisture
can form inside the device and damage electronic
circuit boards.
ವ Do not attempt to open the device other than as
instructed in this guide.
ವ Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
ವ Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
ವ Do not paint the device. Paint can clog the moving
parts and prevent proper operation.
ವ Use a soft, clean, dry cloth to clean any lenses, such
as camera, proximity sensor, and light sensor lenses.
ವ Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may
violate regulations governing radio devices.
ವ Use chargers indoors.
ವ Always create a backup of data you want to keep,
such as contacts and calendar notes.
ವ To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is
not working properly, take it to the nearest authorised
service facility for service.
Cyan Magenta Yellow Black
95
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that all electrical and electronic products,
batteries, and accumulators must be taken to
separate collection at the end of their working life. This
requirement applies to the European Union and other
locations where separate collection systems are
available. Do not dispose of these products as unsorted
municipal waste.
By returning the products to collection you help
prevent uncontrolled waste disposal and promote the
reuse of material resources. More detailed information
is available from the product retailer, local waste
authorities, national producer responsibility
organizations, or your local Nokia representative. For
the product Eco-Declaration or instructions for
returning your obsolete product, go to country-specific
information at www.nokia.com.
96
Cyan Magenta Yellow Black
Additional safety information
Small children
Medical devices
Your device and its enhancements may contain small
parts. Keep them out of the reach of small children.
Operation of any radio transmitting equipment,
including wireless phones, may interfere with the
functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the
medical device to determine if they are adequately
shielded from external RF energy or if you have any
questions. Switch off your device in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Operating
environment
This device meets RF exposure guidelines when used
either in the normal use position against the ear or
when positioned at least 2.2 centimetres (7/8 inch)
away from the body. When a carry case, belt clip, or
holder is used for body-worn operation, it should not
contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires
a quality connection to the network. In some cases,
transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials
may be attracted to the device. Do not place credit
cards or other magnetic storage media near the device,
because information stored on them may be erased.
Implanted medical devices
Manufacturers of medical devices recommend that a
minimum separation of 15.3 centimetres (6 inch)
should be maintained between a wireless device and
an implanted medical device, such as a pacemaker or
implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who
have such devices should:
ವ Always keep the wireless device more than 15.3
centimetres (6 inch) from the medical device when
the wireless device is turned on.
Cyan Magenta Yellow Black
97
ವ Not carry the wireless device in a breast pocket.
ವ Hold the wireless device to the ear opposite the
medical device to minimise the potential for
interference.
ವ Turn the wireless device off immediately if there is
any reason to suspect that interference is taking
place.
ವ Read and follow the directions from the
manufacturer of their implanted medical device.
If you have any questions about using your wireless
device with an implanted medical device, consult your
health care provider.
Hearing aids
Some digital wireless devices may interfere with some
hearing aids. If interference occurs, consult your
service provider.
Vehicles
98
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems,
electronic speed control systems, and air bag systems.
For more information, check with the manufacturer, or
its representative, of your vehicle or any equipment
that has been added.
Only qualified personnel should service the device or
install the device in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly
that all wireless device equipment in your vehicle is
mounted and operating properly. Do not store or carry
flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not
place objects, including installed or portable wireless
equipment in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Using your device while flying in aircraft is prohibited.
Switch off your device before boarding an aircraft. The
use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the
wireless telephone network, and may be illegal.
Potentially explosive
environments
Switch off your device when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Potentially explosive atmospheres
include areas where you would normally be advised to
turn off your vehicle engine. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refuelling points
such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical
plants; or where blasting operations are in progress.
Cyan Magenta Yellow Black
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include
below deck on boats, chemical transfer or storage
facilities and areas where the air contains chemicals or
particles such as grain, dust, or metal powders. You
should check with the manufacturers of vehicles using
liquefied petroleum gas (such as propane or butane) to
determine if this device can be safely used in their
vicinity.
Emergency calls
Important: This device operates using radio
signals, wireless networks, landline networks, and
user-programmed functions. If your device supports
voice calls over the internet (internet calls), activate
both the internet calls and the cellular phone. The
device will attempt to make emergency calls over both
the cellular networks and through your internet call
provider if both are activated. Connections in all
conditions cannot be guaranteed. You should never
rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for
adequate signal strength. Depending on your
device, you may also need to complete the
following:
ವ Insert a SIM card if your device uses one
ವ Remove certain call restrictions you have
activated in your device.
ವ Change your profile from offline or flight profile
mode to an active profile.
2. Press the end key as many times as needed to clear
the display and ready the device for calls.
3. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4. Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless
device may be the only means of communication at the
scene of an accident. Do not end the call until given
permission to do so.
CERTIFICATION
INFORMATION (SAR)
This mobile device meets guidelines for exposure
to radio waves.
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international
guidelines. These guidelines were developed by the
independent scientific organisation ICNIRP and include
safety margins designed to assure the protection of all
persons, regardless of age and health.
The exposure guidelines for mobile devices employ a
unit of measurement known as the Specific Absorption
Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over
10 grams of tissue. Tests for SAR are conducted using
Cyan Magenta Yellow Black
99
standard operating positions with the device
transmitting at its highest certified power level in all
tested frequency bands. The actual SAR level of an
operating device can be below the maximum value
because the device is designed to use only the power
required to reach the network. That amount changes
depending on a number of factors such as how close
you are to a network base station. The highest SAR
value under the ICNIRP guidelines for use of the device
at the ear is 1.53 W/kg.
Use of device accessories and enhancements may
result in different SAR values. SAR values may vary
depending on national reporting and testing
requirements and the network band. Additional SAR
information may be provided under product
information at www.nokia.com.
Your mobile device is also designed to meet the
requirements for exposure to radio waves established
by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of
1.6 W/kg averaged over one gram of tissue. The highest
SAR value reported under this standard during product
certification for use at the ear is 1.40 W/kg and when
properly worn on the body is 0.76 W/kg.
100
Cyan Magenta Yellow Black
Index
Symbols/Numerics
1-touch dialing 33
access points
creating 87
VPN 81
Active notes 55
alarm clock 58
alert tones 84
altitude calibration 54
animated screen saver 68
antennas 14
application settings 89
applications
common actions 19
installing 80
attachments
e-mail 38
autolock period 85
background image 68
backing up data 79
barcodes 82
battery
charge level 17
charging 13
inserting 12
Bluetooth
authorising devices
pairing 71
passcode 71
receiving data 70
security 72
sending data 70
bookmarks 46
browsing
intranet 46
offline 46
web 45
cable 69
cache
emptying 46
Calculator 55
Calendar
settings 26
calendar entries
creating 26
viewing 25
calendar key 25
calendar views
changing 25
caller ID 86
calls
1-touch dialing 33
answering 29
71
call waiting 86
caller ID 86
conference call 30
fixed dialling 77
making 29
making a net call 33
muting the ringing tone 29
net call alert 86
rejecting 29
rejecting with text
message 86
selecting type 86
settings 86
voice commands 34
voice dialling 34
voice mail 33
camera
capturing images 60
toolbar 60
video clips 61
certificates
details 78
settings 79
charging the battery 13
Clock
alarms 58
settings 58
conference calls 30
configuration messages 89
connection methods
Bluetooth 70
Cyan Magenta Yellow Black
101
data cable 69
modem 74
connections
ending 74
GPRS settings 47
PC connection 49
WLAN settings 48
connectors 10
contact groups
adding ringing tones 27
creating 27
making conference calls 27
contacts
adding 27
adding ringing tones 27
searching 27
settings 28
contacts directories
managing 27
contacts key 24
converting
currencies 57
measurements 57
currency conversions 57
102
date
settings 84
decrypting
device memory and memory
card 77
destination
removing 54
setting 54
display
changing the look 68
indicators 17
settings 83
Download!
managing items 47
e-mail
automatic retrieval
settings 44
connecting to mailbox 38
connection settings 43
creating folders 39
deleting 39
replying 38
retrieval settings 43
sending 39
setting up 37
user settings 43
writing 39
e-mail key 25
e-mail key settings 85
encrypting
device memory and memory
card 77
ending
internet connections 46
network connections 74
enhancements
settings 85
File manager 56
files
downloading 64
flash files 65
sending 56
fixed dialling 77
Flash player 65
free memory 20
Gallery 64
GPRS
access point settings 47
settings 87
headset
connecting 14
home key 24
home screen 23
settings 68, 83
switching 24
HSDPA (high-speed downlink
packet access) 69
IM 41
images
rotating 64
sharing online 63
zooming 64
indicators 17
inserting
battery 12
memory card 13
Cyan Magenta Yellow Black
SIM card 12
installation log 80
installing
applications 80
Instant messaging 41
internet 45
ending connections 46
internet calls 33
intranet
browsing 46
jad files 80
jar files 80
Java applications
80
keyguard 19
keypad
lock settings 85
locking 19
tones 84
keys 10
shortcuts 83
landmarks
creating 54
language
settings 84
lock code 76, 85
locking
device 76
device autolock 85
keypad 19, 85
Log 35
adding numbers to
Contacts 35
deleting 35
logos
operator logo 83
welcome logo 83
mailboxes
connecting 38
creating 37
making a call 29
Maps 51, 52
browsing 52
finding locations 53
indicators 52
routes 53
measurements
converting 57
measuring system
changing 54
memory 20
memory card
backing up data 79
ejecting 14
formatting 21
inserting 13
locking 76
microSD 20
passwords 76
setting password 21, 56
unlocking 21
menu 16
messages 36
call rejection messages 86
configuration messages 89
other settings 44
text message settings 41
Messaging
folders 36
microSDHC 20
modem 49, 74
multimedia messages
creating 40
sending 40
settings 42
multitasking 28
Music player
Music Store 63
playing 62
playlists 62
transferring music 63
Music Store 63
net calls
alert settings 86
connecting 32
making a call 33
profiles 32, 88
settings 88
network
settings 86
Notes 59
notification light 84
Cyan Magenta Yellow Black
103
One-touch keys 84
operator
logo 83
selecting 86
original settings 86
profiles
creating 67
customising 67
net call profile 32, 88
selecting ringing tones
PTT 35
push to talk 35
104
packet data
access point settings 47
restricting 89
settings 87
pairing
devices 71
passcode 71
passwords
memory card password 21,
56
PDF reader 57
personalisation 68
changing language 84
display 83
home screen 83
tones 84
PIN code
changing 85
playing
video and audio 65
podcasting 61
searching 61
positioning
settings 51
predictive text input 22, 84
printing 57
Quickoffice
67
56
radio
listening to 65
viewing visual content 66
RealPlayer
playing media clips 65
recorder 63
remote lock 76
remote synchronisation 81
restoring original settings 86
ringing tones 84
contacts and contact
groups 27
in profiles 67
vibrating alert 84
satellite signal strength
saving
current position 54
files 19
settings 19
screen saver 68, 83
54
search modes
switching 27
searching
available WLANs 74
security
Bluetooth 72
device and SIM card 85
memory card 76
sending
files 19, 56
using Bluetooth 70
videos 31
session initiation protocol
See SIP
settings
applications 89
Calendar 26
calls 86
certificate 79
clock 58
contacts 28
date 84
display 83
e-mail connection 43
e-mail key 85
e-mail retrieval 44
e-mail user 43
enhancements 85
GPRS 47, 87
home screen 83
keypad lock 85
language 84
multimedia messages 42
net call 88
network 86
Cyan Magenta Yellow Black
packet data 87
positioning 51
restoring 86
SIP 88
text messages 41
time 84
tones 84
Web 46
WLAN 88
WLAN access point 48
WLAN security 88
shortcuts 90
keys 83
signal strength 17
SIM card
inserting 12
SIM change lock 85
SIP
creating profiles 88
editing profiles 88
settings 88
sis files 80
sisx files 80
software packages
installing 80
sound clips 63
standby mode
settings 83
switching device on and off 15
Symbian applications 80
synchronisation
synchronisation profiles 81
tabs
19
text
changing size 83
predictive input 22
writing 21
text messages
sending 40
settings 41
writing 40
themes
changing 68
time
settings 84
tones 84
settings 84
toolbar
camera 60
transferring data 17
trip destination 54
trip meter 54
UPIN code
changing 85
USB data cable 69
vibrating alert 84
video calls
making a call 30
switching to voice call 30
video clips
playing 65
video sharing 31
receiving invitations 31
virtual private network
access points 81
use in applications 82
Voice aid 33
voice mail
calling 33
changing number 33
volume 20
VPN
access points 81
use in applications 82
warning tones 84
Web
connection security 45
settings 46
welcome note 83
WLAN
access point settings 48
access points 73
availability 73
MAC address 72, 88
searching for networks 74
security settings 88
settings 88
WLAN wizard 73
writing 21
Zip manager 57
Cyan Magenta Yellow Black
105

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:03:25 13:44:41+02:00
Modify Date                     : 2008:03:25 13:46:46+02:00
Metadata Date                   : 2008:03:25 13:46:46+02:00
Document ID                     : uuid:0447D0CC60FADC11864F96F90853EBA2
Instance ID                     : uuid:7594f2fe-ffc0-4b47-893a-a152233dd005
Derived From Document Name      : uuid:84dac61d-4842-44f4-b808-3dff135bda46
Derived From Document ID        : uuid:9f5248bf-879c-4f9e-ab59-42ae8e011c76
Format                          : application/pdf
Creator                         : mode
Title                           : untitled
Page Count                      : 105
Author                          : mode
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PYARM-357

Navigation menu