Microsoft RM-37 GSM 900/1800/1900 Cellular Telephone User Manual Manual

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone Manual

Manual

Download:
Mirror Download [FCC.gov]
Document ID	410594
Application ID	sAui1WBzGap2ZgqPKePRvw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	150.85kB (1885569 bits)
Date Submitted	2004-03-31 00:00:00
Date Available	2004-03-31 00:00:00
Creation Date	2004-03-26 10:21:45
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-03-26 11:33:59
Document Title	Manual
Document Creator	FrameMaker+SGML 5.5.6p145

User’s Guide for Nokia 6610i
phone
9230846
Issue 1
LEGAL INFORMATION
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product
RM-37 is in conformity with the provisions of the following Council
Directive:1999/5/EC. A copy of the Declaration of Conformity can be found at
http://www.nokia.com/phones/declaration_of_conformity/.
Part No. 9230846 Issue No. 1
Copyright ©2004 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or
registered trademarks of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or tradenames of their respective owners.
Printed in Canada 03/2004
US Patent No 5818437 and other pending patents. T9 text input software
Copyright ©1999-2004. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA
Security.
Java is a trademark of Sun Microsystems, Inc.
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4
VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A)
DATA OR INFORMATION ENCODED BY A CONSUMER FOR PERSONAL AND NONCOMMERCIAL USE WITHOUT REMUNERATION; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.
The information contained in this user guide was written for the Nokia 6610i
product. Nokia operates a policy of ongoing development. Nokia reserves the
right to make changes to any of the products described in this document without
prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT
ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO
REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR
NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software that may only be
exported in accordance with the U. S. Export Administration regulations. Diversion contrary to U.S. or Canadian law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This
device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.
Manufactured or sold under one or more following US Patents.
Asterisk (*) indicates design patents pending.
4868846
5519885
5827082
5966378
6112099
6266330
4969192
5526366
5835889
5970059
6115617
6282436
5001372
5553125
5839101
5987137
6118775
6285888
5045973
5557639
584884
5991716
6121846
6292668
5101175
5565821
5845219
5991857
6122498
6295286
5212834
5570369
5857151
5999523
6128322
6308084
5230091
5581244
5862178
6005857
6128509
6310609
5233634
5597102
5870683
6011853
6138091
6311054
5241284
5625274
5887266
6014573
6140966
6314166
5241583
5640395
5889770
6018277
6144243
6324412
5266782
5664004
5892475
6026161
6144676
6347218
5311151
5664053
5898925
6028567
6148209
6356759
5311179
5669069
5907823
6029128
6151485
6359904
5317283
5677620
5914690
6038238
6151507
6363259
5331638
5678224
5914796
6043760
6163609
6370362
5335362
5692032
5915440
6047196
6164547
6370390
5353328
5699406
5917868
6049796
6167248
6377803
5378935
5699482
5920826
6050415
6170073
6393121
5384782
5701392
5926138
6055439
6178535
6430721
5390223
5729534
5926769
6060193
6185295
6434133
5396657
5729541
5930233
6069923
6188909
*29/170210
5400949
5734683
5946651
6072787
6195338
*29/170229
5416435
5754976
5956332
6081534
6199035
*29/170245
5442521
5760568
5956625
6084962
6201876
*29/170246
5444816
5782646
5956633
6088746
6219560
5446364
5794142
5960354
6094587
6240076
5479476
5802465
5960389
6097964
6240079
5487084
5805084
5963901
6105784
6249584
5493255
5805301
5966374
6108553
6259312
Contents
For your safety......................... 5
General information ................ 8
Access codes ........................................... 8
Security code (5 to 10 digits) ......... 8
PIN and PIN2 codes (4 to 8 digits),
Module PIN and Signing PIN .......... 8
PUK and PUK2 codes (8 digits) ...... 8
Barring password (4 digits) ............. 9
Wallet code (4 to 10 digits) ............ 9
Overview of the functions
of the phone........................... 10
Camera ...................................................
Multimedia messaging service
(MMS) .....................................................
Polyphonic sound (MIDI) ...................
JavaTM applications ...........................
General Packet Radio Service
(GPRS).....................................................
Over the Air (OTA) settings service.
10
10
10
11
11
11
1. Your phone ......................... 12
Keys and connectors...........................
Standby mode.......................................
Screen saver.......................................
Wallpaper ...........................................
Essential indicators in standby
mode....................................................
Headset...................................................
Putting on the wrist strap.................
12
13
14
14
14
15
16
2. Getting started................... 17
Installing the SIM card and the
battery ....................................................
Charging the battery ..........................
Switching the phone on and off .....
Keypad lock (Keyguard) .....................
Changing the covers...........................
17
19
20
20
22
3. Call functions ..................... 23
Making a call ........................................ 23
Speed dialling a phone number ... 23
Answering or rejecting an incoming
call ........................................................... 24
Call waiting ....................................... 24
Options during a call .......................... 24
4. Writing text ........................ 26
Setting predictive text input
on or off .................................................
Using predictive text input...............
Writing compound words ..............
Using traditional text input..............
Tips for writing text............................
26
26
27
27
27
5. Using the menu .................. 29
Accessing a menu function .............. 29
List of menu functions....................... 30
6. Menu functions .................. 32
Messages (Menu 1)............................. 32
Text messages (SMS) ...................... 32
Multimedia messages ..................... 37
Multimedia messages memory
full ........................................................ 40
Deleting messages ........................... 41
Chat ..................................................... 41
Voice messages................................. 42
Info messages ................................... 42
Message settings.............................. 42
Service commands ........................... 45
Call register (Menu 2) ........................ 45
Recent calls lists............................... 46
Call counters and call timers........ 46
Contacts (Menu 3) .............................. 47
Selecting settings for contacts .... 48
Saving names and phone numbers
(Add name) ........................................ 48
Searching for a name in contacts 49
Editing a name, number or
text item or changing an image .. 50
Deleting names, numbers and
images ................................................. 50
Copying contacts ............................. 51
Sending and receiving a business
card......................................................
Speed dials ........................................
Info numbers and service
numbers..............................................
My numbers ......................................
Caller groups.....................................
Profiles (Menu 4).................................
Settings (Menu 5)..............................
Personal shortcuts...........................
Time and date settings...................
Call settings ......................................
Phone settings..................................
Display settings................................
Tone settings.....................................
Enhancement settings....................
Security settings ..............................
Restore factory settings.................
Radio (Menu 6)....................................
Tuning a radio channel ..................
Using the radio.................................
Camera (Menu 7) ................................
To take a photo ................................
Camera settings ...............................
Gallery (Menu 8) .................................
Organiser (Menu 9) ............................
Alarm clock........................................
Calendar .............................................
To-do list............................................
Games (Menu 10) ...............................
Launching a game ...........................
Memory status for games .............
Game settings...................................
Applications (Menu 11).....................
Launching an application..............
Other options available for
an application or application set
Downloading an application ........
Memory status for applications ..
Extras (Menu 12).................................
Calculator ..........................................
Countdown timer ............................
Stopwatch .........................................
51
52
52
52
53
53
54
54
55
56
57
59
60
61
62
63
63
64
64
65
65
66
66
68
68
69
71
72
72
73
73
73
73
74
74
75
75
75
76
77
Wallet ................................................. 78
Synchronisation ............................... 80
Connectivity (Menu 13) .................... 82
Infrared............................................... 82
GPRS.................................................... 83
Services (Menu 14)............................. 84
Basic steps for accessing and using
services ............................................... 84
Setting up the phone for a
service................................................. 84
Making a connection to a service 86
Browsing the pages of a service . 86
Disconnect from a service............. 87
Appearance settings of the
multi-mode browser....................... 88
Cookies ............................................... 88
Bookmarks ......................................... 88
Downloading..................................... 89
Service inbox .................................... 89
The cache memory .......................... 90
Browser security .............................. 90
Go to (Menu 15).................................. 93
SIM services (Menu 16)..................... 93
7. PC Connectivity.................. 94
PC Suite ................................................. 94
GPRS, HSCSD and CSD................... 95
Using data communication
applications .......................................... 95
8. Battery information ........... 96
Charging and Discharging 969.
9. Technical Information......... 97
CARE AND MAINTENANCE ... 98
IMPORTANT SAFETY
INFORMATION........................ 99
APPENDIX ..............................105
A message from the CTIA ................ 105
A message from the U.S. Food and
Drug Administration for all users of
mobile phones..................................... 108
FOR YOUR SAFETY
FOR YOUR SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in
aircraft.
SWITCH OFF WHEN REFUELLING
Don’t use the phone at a refuelling point. Don’t use near fuel or
chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don’t use the phone where blasting is in
progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don’t touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
FOR YOUR SAFETY
BACK-UP COPIES
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press
as many
times as needed to clear the display and return to the start screen. Key
in the emergency number, then press
. Give your location. Do
not end the call until given permission to do so.
■ ABOUT YOUR DEVICE
The wireless device described in this guide is approved for use on the EGSM 900,
GSM 1800 and GSM1900 network. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■ Network Services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These Network Services may not be available on all networks or you
may have to make specific arrangements with your service provider before you
can utilize Network Services. Your service provider may need to give you
additional instructions for their use and explain what charges will apply. Some
networks may have limitations that affect how you can use Network Services. For
instance, some networks may not support all language-dependent characters
and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Contact
your service provider for more information.
FOR YOUR SAFETY
■ Shared Memory
The following features in this device may share memory: phone book, text and
multimedia messages, images and ringing tones in gallery, calendar, to-do notes,
and Java games and applications. Use of one or more of these features may
reduce the memory available for the remaining features sharing memory. For
example, saving many images, bookmarks, Java applications, etc. may use all of
the available memory. Your device may display a message that the memory is full
when you try to use a shared memory feature. In this case, delete some of the
information or entries stored in the shared memory features before continuing.
Some of the features , such as cache, booksmarks, and security certificates may
have a certain amount of memory specially allotted to them in addition to the
memory shared with other features.
■ Enchancements and batteries
Always switch the device off and disconnect the charger before removing the
battery.
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from ACP-12, ACP-8, ACP-7, LCH-9,
and LCH-12.
Warning: Use only batteries, chargers, and enhancements approved by
Nokia for use with this particular model. The use of any other types may
invalidate any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
Your device and its enhancements may contain small parts. Keep them out of
reach of small children.
A few practical rules about accessories and enhancements.
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
General information
General information
■ Access codes
Security code (5 to 10 digits)
The security code helps to protect your phone against unauthorised use.
The pre-set code is 12345. Change the code, and keep the new code
secret and in a safe place separate from your phone. To change the code,
and to set the phone to request the code, see Security settings on page
62.
PIN and PIN2 codes (4 to 8 digits), Module PIN and
Signing PIN
• The PIN (Personal Identification Number) code protects your SIM
card against unauthorised use. The PIN code is usually supplied with
the SIM card. Set the phone to request the PIN code each time the
phone is switched on, see Security settings on page 62.
• The PIN2 code may be supplied with the SIM card and is required to
access some functions, such as charging unit counters.
• The module PIN is required to access the information in the security
module. See Security module on page 90. The module PIN is supplied
with the SIM card if the SIM card has a security module in it.
• The signing PIN is required for the digital signature. See Digital
signature on page 92. The signing PIN is supplied with the SIM card if
the SIM card has a security module in it.
If you key in an incorrect PIN code three times in succession, the phone
may display SIM blocked or PIN code blocked, for example, and ask you
to enter the PUK code.
PUK and PUK2 codes (8 digits)
The PUK (Personal Unblocking Key) code is required to change a blocked
PIN code. The PUK2 code is required to change a blocked PIN2 code.
General information
If the codes are not supplied with the SIM card, contact your network
operator or service provider for the codes.
Barring password (4 digits)
The barring password is required when using the Call barring service, see
Security settings on page 62. You can obtain the password from your
service provider.
Wallet code (4 to 10 digits)
The wallet code is required to access the wallet services. If you key in an
incorrect wallet code several times, the wallet application is blocked for
five minutes. For further information, see Wallet on page 78.
Overview of the functions of the phone
Overview of the functions of the
phone
Your phone provides many functions, which are practical for daily use,
such as a calendar, a clock, an alarm clock, a camera, a radio, and many
more.
■ Camera
Your phone has a built-in camera that can be used for taking pictures.
For sending a picture via the Multimedia Messaging Service (MMS), see
Multimedia messages on page 37, see Camera (Menu 7) on page 65. The
pictures can also be used as wallpapers in standby mode or as thumbnail
pictures in Contacts.
You can save your pictures in a compatible PC using the PC Suite
software.
■ Multimedia messaging service (MMS)
The phone is able to send and receive multimedia messages composed of
text, sound and a picture. You can save the pictures and ringing tones
for personalising your phone. See Multimedia messages on page 37.
■ Polyphonic sound (MIDI)
Polyphonic sound consists of several sound components played at the
same time. Your phone has sound components from over 40
instruments, but the phone can only play a few instruments at the same
time. Polyphonic sounds are used, for example, in ringing tones and
message alert tones. The phone supports Scalable Polyphonic MIDI (SPMIDI) format.
You can receive polyphonic ringing tones via a multimedia service, see
Reading and replying to a multimedia message on page 39, or you can
download them via the gallery menu, see Gallery (Menu 8) on page 66 or
via PC suite, see PC Suite on page 94.
10
Overview of the functions of the phone
■ JavaTM applications
Your phone supports Java 2 Micro Edition, J2METM, and includes some
JavaTM applications and games that have been specially designed for
mobile phones. You can download new applications and games to your
phone, see Applications (Menu 11) on page 73.
■ General Packet Radio Service (GPRS)
GPRS technology is a network service that allows mobile phones to be
used for sending and receiving data over an Internet Protocol (IP) -based
network. GPRS is a data bearer that enables wireless access to data
networks such as the Internet. The applications that may use GPRS are
MMS and SMS messaging (SMS, Short Message Service), browsing
sessions, Java application downloading and the PC dial-up (for example,
Internet and e-mail).
Note that your phone supports three simultaneous GPRS connections.
For example, you can receive multimedia messages and, at the same
time, have an ongoing PC dial-up connection or browsing session.
Before you can use GPRS technology
• Contact your network operator or service provider for availability
and subscription to the GPRS service.
• Save the GPRS settings for each of the applications used over GPRS.
See Setting up the phone for a service on page 84, Message settings
on page 42 and GPRS on page 83.
Pricing for GPRS and applications
For more detailed information on pricing, contact your network operator
or service provider.
■ Over the Air (OTA) settings service
In order to use MMS, GPRS and other wireless services, you need to have
proper settings on your phone. You may be able to receive the settings
directly as an OTA message and you need to save the settings on your
phone. For more information on the availability of the settings, contact
your network operator, service provider or nearest authorised Nokia
dealer.
11
Your phone
1. Your phone
■ Keys and connectors
1. Power key
Switches the phone on
and off.
When the keypad is
locked, pressing the power
key briefly turns the
phone’s display lights on
for approximately 15
seconds.
2. Volume keys
Adjust the volume of the
earpiece or the
loudspeaker, or the
headset when it is
connected to the phone.
3. 4-way scroll keys
and
Enables, for example,
scrolling through
contacts, menus or settings and in calendar, or moving the cursor
when writing text.
4. Selection keys
and
The function of these keys depends on the guiding text shown on the
display above the keys. See Standby mode on page 13.
5.
dials a phone number, and answers a call. In standby mode it
shows the list of the most recently called numbers.
6.
ends an active call. Exits from any function.
7.
and
12
enter numbers and characters.
are used for various purposes in different functions.
Your phone
1. Charger connector
2. Pop-PortTM connector
used, for example, for
headsets and the data
cable.
3. Infrared (IR) port
4. Camera lens on the back
cover of the phone.
■ Standby mode
When the phone is ready for use, and you have not keyed in any
characters, the phone is in standby mode.
1. Shows the name of the network or the operator logo to indicate in
which cellular network the phone is currently being used.
2. Shows the signal strength of the cellular network at your current
location. The higher the bar, the stronger the signal.
3. Shows the battery charge level. The higher the bar, the more power
in the battery.
4. The left selection key in standby mode is Menu.
5. The right selection key in standby mode is Contacts or Go to or it has
an operator specific name. If you press the right selection key when it
is
• Contacts, you can access the Contacts menu.
• the operator specific key, you can access an operator’s homepage.
• Go to, you can then scroll to the specific function and select it. To
set the functions for your personal shortcut, see Personal
shortcuts on page 54. Same functions can also be activated if you
select the menu Go to, see Go to (Menu 15) on page 93.
13
Your phone
Screen saver
The phone automatically activates a screen saver in standby mode after
a certain length of time if no phone function is used. See Screen saver
on page 60. Press any key to deactivate the screen saver.
Wallpaper
You can set your phone to display a background picture, wallpaper,
when the phone is in standby mode. See Wallpaper on page 59.
Essential indicators in standby mode
You have received one or several text or picture messages. See
Reading and replying to an SMS message or an e-mail on page
34.
You have received one or several multimedia messages. See
Reading and replying to a multimedia message on page 39.
The phone’s keypad is locked. See Keypad lock (Keyguard) on
page 20.
The phone does not ring for an incoming call or text message
when Incoming call alert is set to Off and Message alert tone is
set to Off. See Tone settings on page 60.
The alarm clock is set to On. See Alarm clock on page 68.
The countdown timer is running. See Countdown timer on page
76.
The stopwatch is running in the background. See Stopwatch on
page 77.
When the GPRS connection mode Always online is selected and
the GPRS service is available, the indicator is shown on the top
left of the display. Refer to GPRS connection on page 83.
When a GPRS connection is established, the indicator is shown
on the top left of the display. Refer to GPRS connection on page
83 and Browsing the pages of a service on page 86.
14
Your phone
The GPRS connection is suspended (on hold), for example if
there is an incoming or outgoing call during a GPRS dial-up
connection. The indicator is shown on the top right of the
display.
Infrared connection indicator, see Infrared on page 82.
All your calls are diverted to another number, Divert all voice
calls. If you have two phone lines, the divert indicator for the
first line is
and for the second line
. See Call divert on
page 56.
or
If you have two phone lines, the indicator displays the selected
phone line. See Line for outgoing calls on page 57.
The loudspeaker has been activated, see Options during a call on
page 24.
Calls are limited to a closed user group. See Security settings on
page 62.
The timed profile is selected. See Profiles (Menu 4) on page 53.
or
A headset, handsfree, loopset or music stand enhancement is
connected to the phone.
To enable the phone to show the time and date in standby mode, see
Clock on page 55 and Date on page 55.
■ Headset
Warning: When using the stereo headset your ability to hear outside
sounds may be affected. Do not use the stereo headset where it can
endanger your safety.
Connect your headset to the Pop-Port connector
as shown in the picture.
15
Your phone
You can carry the stereo headset
HDS-3 as shown in the picture.
■ Putting on the wrist
strap
Thread the strap as shown in the picture and
then tighten it.
16
Getting started
2. Getting started
■ Installing the SIM card and the battery
Keep all SIM cards out of the reach of small children. For availability and
information on using SIM card services, contact your SIM card vendor. This may
be the service provider, network operator, or other vendor.
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting or removing the card.
Before installing the SIM card, always make sure that the phone is
switched off and disconnected from any enhancement and then remove
the battery.
1. To remove the back cover from the phone:
With the back of the phone facing you, push the back cover release
button (1) and remove the cover from the phone (2).
2. Remove the battery by lifting it from
the end from the finger grip (3).
17
Getting started
3. To release the SIM card holder, slide the card holder backwards (4)
and open it by lifting (5).
4. Insert the SIM card into the SIM card
holder (6). Make sure that the SIM card
is properly inserted and that the golden
contact area on the card is facing
downwards.
5. Close the SIM card holder (7) and slide
it forwards to lock it (8).
6. Replace the battery (9).
7. To replace the back cover:
First place the top of the back cover
over the locking catch on the top of
the phone (10). Direct the back
18
Getting started
cover towards the locking catches on both sides of the phone and
press to lock the cover into place (11).
■ Charging the battery
1. Connect the lead from the
charger to the socket on the
bottom of your phone.
2. Connect the charger to an AC
wall socket.
The text Charging is displayed
briefly if the phone is switched
on. If the battery is completely
flat, it may take a few minutes before the charging indicator appears
on the display or before any calls can be made.
You can use the phone while the charger is connected.
The charging time depends on the charger and the battery used. For
example, charging a BLD-3 battery with the ACP-12 charger takes up to
one hour and 30 minutes while the phone is in standby mode.
19
Getting started
■ Switching the phone on and off
Press and hold the power key
Note that if the phone displays Insert SIM card even
though the SIM card is properly inserted, or SIM card
not supported, contact your network operator or
service provider. Your phone does not support 5-Volt
SIM cards and the card may need to be changed.
• If the phone asks for a PIN code, key in the PIN
code (displayed as ****), and press OK.
See also PIN code request in Security settings on page 62 and Access
codes on page 8.
• If the phone asks for a security code, key in the security code
(displayed as *****), and press OK.
See also Access codes on page 8.
Your device has an internal antenna.
Note: As with any other radio
transmitting device, do not touch
the antenna unnecessarily when
the device is switched on. Contact with the
antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact
with the antenna area when operating the
device optimises the antenna performance
and the battery life.
■ Keypad lock (Keyguard)
You can lock the keypad to prevent the keys being accidentally pressed,
for example, when your phone is in your handbag.
20
Getting started
• Locking the keypad
In standby mode, press Menu and then
within 1.5 seconds.
• Unlocking the keypad
Press Unlock and then
seconds.
within 1.5
To answer a call when the keyguard is on,
press
. During a call, the phone can
be operated normally. When you end or
reject the call, the keypad will
automatically be locked.
For automatic keypad locking, see Automatic keyguard on page 58.
For locking the keypad during a call, see Options during a call on page
24.
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device. Key in the emergency number and press
21
Getting started
■ Changing the covers
Note: Before removing the cover, always switch off the power and
disconnect the charger and any other device. Avoid touching electronic
components while changing the covers. Always store and use the
device with the covers attached.
1. Remove the back cover from the phone. See step 1 in Installing the
SIM card and the battery on page 17.
2. To remove the front cover, gently pull the
locking catch on the top of the front cover from
the locking hole in the phone (1) and remove the
cover starting from the top.
3. Place the key mat on the new front
cover (2).
4. To replace the front cover, first place
the catches on the lower part of the
cover into the corresponding holes on
the phone (3) and then gently push
the catch on the top of the cover
through the locking hole on the top of
the phone (4). Press the cover into
place.
5. Replace the back cover of the phone. See step 7 in Installing the SIM
card and the battery on page 17.
22
Call functions
3. Call functions
■ Making a call
1. Key in the phone number, including the area code. If you key in an
incorrect character, press Clear to delete it.
For international calls, press
twice for the international prefix
(the + character replaces the international access code) and then key
in the country code, the area code without the leading 0, if
necessary, and the phone number.
2. Press
to call the number.
3. Press
to end the call or to cancel the call attempt.
See also Options during a call on page 24.
Making a call using contacts
• To search for a name/phone number that you have saved in Contacts,
see Searching for a name in contacts on page 49. Press
to call
the number.
Last number redialling
• In standby mode, press
once to access the list of the most
recent 20 numbers that you called or attempted to call. Scroll to the
number or name that you want, and press
to call the number.
Calling your voice mailbox
• In standby mode, press and hold
, or press
and
If the phone asks for the voice mailbox number, key it in and press
OK. See also Voice messages on page 42.
Speed dialling a phone number
Before you can use speed dialling, assign a phone number to one of the
speed-dialling keys, from
to
, see Speed dials on page 52.
Call the number in either of the following ways:
• Press the speed-dialling key that you want and then press
• If Speed dialling is set to on, press and hold a speed-dialling key until
the call is started. See Speed dialling on page 56.
23
Call functions
■ Answering or rejecting an incoming call
Press
to answer an incoming call and press
Press
to reject an incoming call.
to end the call.
If you press Silence, only the ringing tone is muted. Then either answer
or reject the call.
If a compatible headset supplied with the headset key is connected to
the phone, you can answer and end a call by pressing the headset key.
Tip: If the Divert if busy function is activated to divert the calls,
for example to your voice mailbox, rejecting an incoming call will
also divert the call. See Call divert on page 56.
Note that when somebody is calling you, the phone shows the caller’s
name, phone number or the text Private number or Call. If more than
one name is found in Contacts with the same seven last digits of the
phone number as the caller’s number, only the phone number will be
displayed, if this is available. The phone may display an incorrect name,
if the caller’s number is not saved in Contacts but there is another name
saved with the same seven last digits in the phone number as in the
phone number of the caller.
Call waiting
During a call, press
to answer the waiting call (network service).
The first call is put on hold. Press
to end the active call.
To activate the Call waiting function, see Call waiting on page 57.
■ Options during a call
Many of the options that you can use during a call are network services.
For availability, contact your network operator or service provider.
Press Options during a call for some of the following options:
• Mute or Unmute, End call, End all calls, Contacts, Menu and Hold or
Unhold, New call, Private, Answer and Reject.
• Conference to make a conference call that allows up to six persons to
take part in a conference call. During a call, make a call to a new
24
Call functions
participant (New call). The first call is put on hold. When the new call
has been answered, select Conference to include the first participant
in the conference call. To have a private conversation with one of the
participants, select Private and select the desired participant. To
rejoin the conference call after a private conversation, select
Conference.
• Lock keypad to activate the keypad lock.
• Send DTMF to send DTMF (Dual Tone Multi-Frequency) tone strings,
for example passwords or bank account numbers. The DTMF system
is used by all touch-tone telephones. Key in the DTMF string or
search for it in Contacts and press OK. Note that you can key in the
wait character w and the pause character p by repeatedly pressing
• Swap to switch between the active call and the call on hold, Transfer
to connect a call on hold to an active call, and disconnect yourself
from the calls.
• Loudspeaker to use your phone as a loudspeaker during a call. Do not
hold the phone to your ear during loudspeaker operation. To
activate/deactivate the loudspeaker, select Loudspeaker/Handset or
press Loudsp./Handset, respectively. The loudspeaker is
automatically deactivated when you end the call or call attempt, or
connect the handsfree unit or headset to the phone.
If you have connected a compatible handsfree unit or the headset to
the phone, Handset in the options list is replaced with Handsfree or
Headset and the selection key Handset with Handsfr. or Headset,
respectively.
Warning: Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely
loud.
Using the loudspeaker with the radio, see Using the radio on page 64.
25
Writing text
4. Writing text
You can key in text, for example, when writing messages, using
traditional or predictive text input.
When you are writing text, the predictive text input is indicated by
and the traditional text input by
at the top left of the display. The
character case is indicated by
, or
next to the text input
indicator. You can change the character case by pressing
. The
number mode is indicated by
, and you can change between the
letter and number mode by pressing and holding
■ Setting predictive text input on or off
When writing text, press Options and select Dictionary.
• To set the predictive text input on, select a language in the dictionary
options list. Predictive text input is only available for the languages
on the list.
• To revert to traditional text input, select Dictionary off.
Tip: To quickly set the predictive text input on or off when
writing text, press
twice, or press and hold Options.
■ Using predictive text input
You can key in any letter with a single keypress. The predictive text input
is based on a built-in dictionary to which you can also add new words.
1. Start writing a word using the keys
to
. Press each key
only once for one letter. The word changes after each keystroke.
Example: To write Nokia when the English dictionary is
selected, press
and
To insert a number while in letter mode, press and hold the desired
number key.
For more instructions for writing text, see Tips for writing text on
page 27.
26
Writing text
2. When you have finished writing the word and it is correct, confirm it
by adding a space with
or by pressing any of the scroll keys.
Pressing a scroll key also moves the cursor.
If the word is not correct,
press
repeatedly or press Options and select Matches. When
the word that you want appears, confirm it.
If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
press Spell, key in the word (traditional text input is used) and press
Save. When the dictionary becomes full, the new word replaces the
oldest one that was added.
3. Start writing the next word.
Writing compound words
Key in the first part of the word and confirm it by pressing
last part of the word and confirm the word.
. Write the
■ Using traditional text input
Press a number key,
to
, repeatedly until the desired
character appears. Not all characters available under a number key are
printed on the key. The characters available depend on the language
selected in the Language menu, see Language on page 57.
To insert a number while in letter mode, press and hold the desired
number key.
• If the next letter you want is located on the same key as the present
one, wait until the cursor appears, or press any of the scroll keys and
then key in the letter.
• The most common punctuation marks and special characters are
available under the number key
More instructions for writing text, see Tips for writing text on page 27.
■ Tips for writing text
The following functions may also be available for writing text:
27
Writing text
• To insert a space, press
• To move the cursor to the left, right, down or up, press the scroll keys
, ,
or
, respectively.
• To delete a character to the left of the cursor, press Clear. Press and
hold Clear to delete the characters more quickly.
To delete all the characters at once when writing a message, press
Options and select Clear text.
• To insert a word when using the predictive text input, press Options
and select Insert word. Write the word using the traditional text
input and press Save. The word is also added to the dictionary.
• To insert a special character when using the traditional text input,
press
, or when using the predictive text input, press and hold
, or press Options and select Insert symbol.
Press any of the scroll keys to scroll to a character and press Use to
select the character.
You can also scroll to a character by pressing
, and select the character by pressing
The following options are available when writing text messages:
• To insert a phone number while in letter mode, press Options and
select Insert number. Key in the phone number or search for it in
Contacts and press OK.
• To insert a name from Contacts, press Options and select Insert
contact. To insert a phone number or a text item attached to the
name, press Options and select View details.
28
or
Using the menu
5. Using the menu
The phone offers you an extensive range of functions, which are
grouped into menus. Most of the menu functions are provided with a
brief help text. To view the help text, scroll to the menu function you
want and wait for 15 seconds. To exit the help text, press Back. See Help
text activation on page 59.
■ Accessing a menu function
By scrolling
1. To access the menu, press Menu.
2. Scroll with
or
through the menu (or with any of the
scroll keys if the grid menu view is selected), and select, for example,
Settings by pressing Select. To change the menu view, see Menu
view on page 60.
3. If the menu contains submenus, select the one that you want, for
example Call settings.
4. If the selected submenu contains further submenus, repeat step 3.
Select the next submenu, for example Anykey answer.
5. Select the setting of your choice.
6. Press Back to return to the previous menu level, and Exit to exit the
menu.
By using a shortcut
The menus, submenus and setting options are numbered and you can
access some of them by using their shortcut number.
To access the menu, press Menu. Key in quickly, within two seconds, the
index number of the menu function you want to access. Note that to
access the menu functions in menu 1, press Menu and key in
and
and then key in the rest of the desired shortcut number.
Press Back to return to the previous menu level, and Exit to exit the
menu.
29
Using the menu
■ List of menu functions
1. Messages
1. Text messages
2. Multimedia msgs.
3. Chat
4. Voice messages
5. Info messages
6. Message settings
7. Service commands
2. Call register
1. Missed calls
2. Received calls
3. Dialled numbers
4. Delete recent call lists
5. Call duration
6. Call costs
7. GPRS data counter
8. GPRS connection timer
3. Contacts
1. Search
2. Add contact
3. Delete
4. Copy
5. Settings
6. Speed dials
7. Info numbers1
8. Service numbers 1
9. My numbers2
10.Caller groups2
4. Profiles
1. General
2. Silent
3. Meeting
4. Outdoor
5. Pager
5. Settings
1. Personal shortcuts
2. Time and date settings
3. Call settings
4. Phone settings
5. Display settings
6. Tone settings
7. Enhancement settings3
8. Security settings
9. Restore factory settings
6. Radio
7. Camera
1. Standard photo
2. Portrait photo
3. Night mode
4. Self-timer
5. Settings
8. Gallery
1. View folders
2. Add folder
3. Delete folder
1. Shown if supported by your SIM card. For availability, contact your network operator or service provider.
2. If Info numbers, Service numbers or both are not supported, the number of this
menu item changes accordingly.
3. This menu is shown only if the phone is or has been connected to a compatible
enhancement available for the phone.
30
Using the menu
4. Rename folder
5. Gallery downloads
9. Organiser
1. Alarm clock
2. Calendar
3. To-do list
10.Games
1. Select game
2. Game downloads
3. Memory
4. Settings
11.Applications
1. Select application
2. App. downloads
3. Memory
12.Extras
1. Calculator
2. Countdown timer
3. Stopwatch
4. Wallet
5. Synchronisation
13.Connectivity
1. Infrared
2. GPRS
14.Services
1. Home
2. Bookmarks
3. Download links
4. Service inbox
5. Settings
6. Go to address
7. Clear the cache
15.Go to
16.SIM services1
1. Only shown if supported by your SIM card. The name and contents may vary depending on the SIM card
31
Menu functions
6. Menu functions
■ Messages (Menu 1)
You can read, write, send and save text, multimedia and
e-mail messages. All messages are organised into
folders.
Before you can send any text, picture, or e-mail message, you need to
save your message centre number, see Message settings on page 42.
Important: E-mail messages or multimedia message objects may
contain viruses or otherwise be harmful to your device or PC. Do not
open any attachment if you are not sure of the trustworthiness of the
sender.
Note: When sending messages, your device may display the words
"Message Sent". This is an indication that the message has been sent by
your device to the message centre number programmed into your
device. This is not an indication that the message has been received at the
intended destination. For more details about messaging services, check with your
service provider.
Text messages (SMS)
Using SMS (Short Message Service), your phone can send and receive
multi-part messages, which consist of several ordinary text messages
(network service). Sending multipart messages may affect invoicing.
Consult your service provider for more details.
You can also send and receive text messages that contain pictures.
Your device supports the sending of text messages beyond the normal 160character limit. If your message exceeds 160 characters, it will be sent as a series
of two or more messages.
The number of available characters / the current part number of a multi-part
message are shown on the top right of the display, for example 120/2.
Note that using special (Unicode) characters such as ë, â, á, ì take up more space.
Note: Picture message function can be used only if it is supported by
your network operator or service provider. Only devices that offer
picture message features can receive and display picture messages.
32
Menu functions
Writing and sending messages
1. Press Menu, and select Messages, Text messages and Create
message.
Tip: To start writing messages quickly, press
mode.
in standby
2. Key in a message. See Writing text on page 26. To insert text
templates or a picture into the message, see Templates on page 36.
Each picture message is made up of several text messages. Therefore,
sending one picture message may cost more than sending one text
message.
3. To send the message, press Options and select Send.
4. Enter the recipient’s phone number or search for the phone number
in Contacts.
Press OK to send the message.
Options for sending a message
After you have written a message, press Options and select Sending
options.
• To send a message to several recipients, select Send to many. When
you have sent the message to everyone you want to send it to, press
Done.
• To send a message using a distribution list, select Send to list.
To create a distribution list, see Distribution lists on page 35.
• To send a message using a message profile, select Sending profile and
then the desired message profile.
To define a message profile, see Message settings on page 42.
Writing and sending e-mail
Before you can send an e-mail via SMS, you need to save the settings for
sending e-mail, see Message settings on page 42. To check e-mail
service availability and to subscribe to the service, contact your network
operator or service provider. To save an e-mail address in Contacts, see
Saving multiple numbers and text items per name on page 48.
33
Menu functions
1. Press Menu, and select Messages, Text messages and Create SMS email.
2. Key in the recipient’s e-mail address or search for it in Contacts and
press OK.
3. If you wish, you can key in a subject for the e-mail and press OK.
4. Key in the e-mail message. See Writing text on page 26. The total
number of characters that you can key in is shown on the top right of
the display. The e-mail address and subject are included in the total
number of characters.
See also Inserting a text template into a message or into an e-mail
on page 36. Pictures cannot be inserted.
5. To send the e-mail, press Options and select Send e-mail. If you have
not saved the settings for sending e-mails, the phone asks for the
number of the e-mail server.
Press OK to send the e-mail.
Reading and replying to an SMS message or an e-mail
When you have received a message or an e-mail, the indicator
and
the number of new messages followed by messages received are shown.
The blinking
indicates that the message memory is full. Before you
can receive new messages, delete some of your old messages in the
Inbox folder.
The text messages function uses shared memory, see Shared Memory on
page 7.
1. Press Show to view the new message, or press Exit to view it later.
Reading the message later:
Press Menu, and select Messages, Text messages and Inbox.
2. If more than one message has been received, select the one that you
want to read. An unread message is indicated by
in front of it.
3. While reading or viewing the message, press Options.
You can select an option, for example, to delete, forward or edit the
message as a text message or an e-mail, rename the message you are
reading or to move it to another folder.
34
Menu functions
Select Copy to calendar to copy text at the beginning of the message
to your phone’s calendar as a reminder note for the current day.
Select Message details to view, if available, the sender’s name and
phone number, the message centre used, and the date and time of
receipt.
Select Use detail to extract numbers, e-mail addresses and website
addresses from the current message.
When reading a picture message, select Save picture to save the
picture in the Templates folder.
4. Select Reply to reply to a message. Select Original text to include the
original message in the reply, or select a standard answer to be
included in the reply, or select Empty screen.
When replying to an e-mail, confirm or edit the e-mail address and
subject first. Then write your reply message.
5. Press Options, select Send, and press OK to send the message to the
displayed number.
Inbox and sent items folders
The phone saves incoming text messages in the Inbox folder and sent
messages in the Sent items folder of the Text messages submenu.
Text messages that you wish to send later can be saved in the Archive,
My folders or Templates folder.
Distribution lists
If you need to send messages frequently to a fixed group of recipients,
you can define a distribution list for that purpose. You can save these
distribution lists in the phone’s memory. Note that the phone sends the
message separately to each recipient on the list. Therefore, sending a
message using a distribution list may cost more than to send a message
to one recipient.
Make sure that the contacts you want to add to the distribution lists, are
saved in the phone’s internal contact memory.
Press Menu, and select Messages, Text messages and Distribution lists.
The names of the available distribution lists are shown.
• If you have not saved any lists, press Add to create one.
35
Menu functions
• Key in the name for the list and press OK. Press Options, and
select View list . Press Add and select a contact from the phone’s
contact memory. To add more contacts to the created list, press
Options, select Add contact and select a new contact.
• Otherwise, scroll to a list, press Options and you can select
• View list to view the contacts on the selected list. Press Options
and you can also delete or view details of a selected contact or
add a new contact.
• Add list to create a distribution list.
• Rename list to change the name of the selected list.
• Clear list to delete all names and phone numbers from the
selected list.
• Delete list to delete the selected distribution list.
If the message cannot be sent to certain recipients on the
distribution list, select Undelivered. Press Options and select
• Resend to list to resend the message to the recipients on the
Undelivered list.
• View list to view the list of the recipients to whom the latest
message sending failed.
• Delete list to delete the Undelivered list.
• View message to view the failed message.
Templates
Your phone includes text templates, indicated by
templates, indicated by .
, and picture
To access the template list, press Menu, and select Messages, Text
messages and Templates.
Inserting a text template into a message or into an e-mail
• When you are writing or replying to a message or an e-mail, press
Options. Select Use template and select the template that you want
to insert.
36
Menu functions
Inserting a picture into a text message
• When you are writing or replying to a message, press Options. Select
Insert picture and select a picture to view it. Press Insert to insert the
picture into your message. The
indicator in the header of the
message indicates that a picture has been attached. The number of
characters that you can enter in a message, depends on the size of
the picture.
To view the text and the picture together before sending the
message, press Options and select Preview.
Archive folder and My folders
To organise your messages, you can move some of them to the Archive
folder, or add new folders for your messages.
While reading a message, press Options. Select Move, scroll to the
folder that you want to move the message to and press Select.
To add or delete a folder, press Menu, and select Messages, Text
messages and My folders.
• To add a folder, press Options and select Add folder.
• To delete a folder, scroll to the folder that you want to delete, press
Options and select Delete folder.
Multimedia messages
Note: Only devices that offer compatible multimedia message or email features can receive and display multimedia messages.
A multimedia message can contain text, sound and a picture. The phone
supports multimedia messages that are up to 45 kB in size. If the
maximum size is exceeded, the phone may not be able to receive the
message. Depending on the network, you may receive a text message
that includes an Internet address where you can view the multimedia
message.
If the message contains a picture, the phone scales it down to fit the
display area.
The default setting of the multimedia message service is generally on.
The appearance of a multimedia message may vary depending on the receiving
device.
37
Menu functions
Multimedia messaging supports the following formats:
• Picture: JPEG, GIF, PNG, and BMP.
• Sound: Scalable Polyphonic MIDI (SP-MIDI) and monophonic ringing
tones.
The phone does not necessarily support all variations of the
aforementioned file formats. If a received message contains any
unsupported elements, they may be replaced with the file name and the
text Object format not supported.
Note that you are not able to receive any multimedia messages if you
have a call in progress, a game or another Java application running, or
an active browsing session over GSM data (see Keying in the service
settings manually on page 85). Because delivery of multimedia
messages can fail for a variety of reasons, do not rely solely upon them
for essential communications.
Writing and sending a multimedia message
To set the settings for multimedia messaging, see Settings for
multimedia messages on page 44. To check availability and to subscribe
to the multimedia messaging service, contact your network operator or
service provider.
1. Press Menu, and select Messages, Multimedia msgs. and Create
message.
2. Key in a message. See Writing text on page 26.
To insert a picture or a sound clip, press Options, and select Insert
image or Insert sound clip, respectively. The list of available folders in
the Gallery is shown. Open a specific folder, scroll to the desired
picture or sound, press Options and select Insert. The
or
indicator in the header of the message indicates that a picture or
sound has been attached.
To insert a name from Contacts, press Options, select More options
and Insert contact. Scroll to the desired name, press Options and
select Insert contact.
To insert a number, press Options, select More options and Insert
number. Key in the number or search for it in Contacts, and press OK.
38
Menu functions
3. To view the message before sending it, press Options and select
Preview.
4. To send the message, press Options and select Send to number (or
Send to e-mail or Send to many).
5. Enter the recipient’s phone number (or e-mail address) or search for
it in Contacts. Press OK and the message is moved to the Outbox
folder for sending.
It takes more time to send a multimedia message than to send a text
message. While the multimedia message is being sent, the animated
indicator
is displayed and you can use other functions on the
phone. If there is an interruption while the message is being sent, the
phone tries to resend it a few times. If this fails, the message will
remain in the Outbox folder and you can try to resend it later.
The messages that you have sent will be saved in the Sent items
folder if the setting Save sent messages is set to Yes. See Settings for
multimedia messages on page 44. This is not an indication that the
message has been received at the intended destination.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred or forwarded.
Reading and replying to a multimedia message
When your phone is receiving a multimedia message, the animated
indicator
is displayed. When the message has been received, the
indicator
and the text Multimedia message received are shown.
The blinking
indicates that the memory for multimedia messages is
full, see Multimedia messages memory full on page 40.
The multimedia message function uses shared memory, see Shared
Memory on page 7.
1. Press Show to view the message, or press Exit to view it later.
Reading the message later: Press Menu, and select Messages,
Multimedia msgs. and Inbox.
2. Scroll to view the message. Press Options and some of the following
options may be available:
• Delete message to delete a saved message.
39
Menu functions
• Reply or Reply to all to reply to the message. To send the reply,
refer to Writing and sending a multimedia message on page 38
• Forward to no., Forward to e-mail or Send to many to forward the
message.
• Edit to edit a message. You can only edit messages you have
created. See Writing and sending a multimedia message on page
38.
• Message details to view the subject, size and the type of message.
• Details to view the details of the attached image or sound.
• Save sound clip to save the ringing tone in the Gallery.
• Save image to save the picture in the Gallery.
Refer also to the file options in Gallery, see Gallery (Menu 8) on page
66.
Inbox, Outbox, Saved and Sent items folders
The phone saves the multimedia messages that have been received in
the Inbox folder of the Multimedia msgs. submenu.
Multimedia messages that have not yet been sent are moved to the
Outbox folder of the Multimedia msgs. submenu.
The multimedia messages that you wish to send later, can be saved in
the Saved items folder of the Multimedia msgs. submenu.
The multimedia messages that have been sent are saved in the Sent
items folder of the Multimedia msgs. submenu if the setting Save sent
messages is set to Yes. See Settings for multimedia messages on page
44.
Multimedia messages memory full
When you have a new multimedia message waiting and the memory for
the messages is full, the indicator
blinks and Multimedia memory
full, view waiting msg. is shown. To view the waiting message, press
Show. To save the message, press Options, select Save message and
delete old messages by first selecting the folder and then the oId
message to be deleted.
40
Menu functions
To discard the waiting message, press Exit and Yes. If you press No, you
can view the message.
Deleting messages
1. To delete text messages, press Menu, and select Messages, Text
messages and Delete messages.
To delete all messages from all folders, select All messages and when
Delete all messages from all folders? is displayed, press OK. If the
folders contain unread messages, the phone will ask whether you
want to delete them also.
To delete multimedia messages, press Menu, and select Messages,
Multimedia msgs. and Delete messages.
2. To delete all messages from a folder, select the folder from which you
want to delete the messages and press OK. If the folder contains
unread messages, the phone will ask whether you want to delete
them also.
Chat
You can have a conversation with another person using this faster text
messaging application (network service). You cannot save received or
sent messages, but you can view them while chatting. Each chat
message is sent and priced as a separate text message.
1. To start a chat session, press Menu, select Messages and Chat. Key in
or search the Contacts for the phone number of the person with
whom you want to start a chat session and press OK.
Another way to start a chat session: When you have received a
message, press Show to read it. To start a chat session, press Options
and select Chat.
2. Key in your nickname for the chat session and press OK.
3. Write your chat message, see Writing text on page 26.
4. To send the message, press Options and select Send.
5. The reply message from the other person is shown above your
original message.
To reply to the message, press OK and repeat steps 3 and 4.
41
Menu functions
6. To end the chat session, press OK and press Options and select Quit.
To view the most recent messages of the current chat session, press
Options and select Chat history. The messages that you sent are
indicated by "<" and your nickname and the messages that you received
are indicated by ">", and the sender’s nickname. Press Back to return to
the message you are currently writing. To edit your nickname, select the
option Chat name.
Voice messages
The voice mailbox is a network service and you may need to subscribe to
it. For more information and for the voice mailbox number, contact your
service provider.
Press Menu, and select Messages and Voice messages. Select
• Listen to voice messages to call your voice mailbox at the phone
number that you have saved in the Voice mailbox number menu.
If you have two phone lines available (network service), each phone
line may have its own voice mailbox number. Refer to Line for
outgoing calls on page 57.
• Voice mailbox number to key in, search for or edit your voice mailbox
number and press OK to save it.
If supported by the network, the indicator
will show new voice
messages. Press Listen to call your voice mailbox number.
Info messages
With the info message network service you can receive messages on
various topics from your service provider. These messages may include,
for example, weather or traffic conditions. For availability, topics and
the relevant topic numbers, contact your service provider.
Message settings
The message settings affect the sending, receiving and viewing of
messages.
42
Menu functions
Settings for text and e-mail messages
1. Press Menu, and select Messages, Message settings, Text messages
and Sending profile.
2. If more than one message profile set is supported by your SIM card,
select the set you want to change.
• Select Message centre number to save the phone number of the
message centre that is required for sending text messages. You
will receive this number from your service provider.
• Select Messages sent via to select the message type Text, E-mail,
Paging or Fax.
• Select Message validity to select the length of time for which the
network should attempt to deliver your message.
• For message type Text, select Default recipient number to save a
default number for sending messages for this profile.
For message type E-mail, select E-mail server to save the e-mail
server number.
• Select Delivery reports to ask the network to send delivery reports
about your messages (network service).
• Select Use GPRS and select Yes to set GPRS as the preferred SMS
bearer. Also, set the GPRS connection to Always online, see GPRS
connection on page 83.
• Select Reply via same centre to allow the recipient of your
message to send you a reply via your message centre (network
service).
• Select Rename sending profile to change the name of the selected
message profile. The message profile sets are only displayed if
your SIM card supports more than one set.
Overwrite settings
When the text message memory is full, the phone cannot receive or send
any new messages. However, you can set the phone to automatically
replace old text messages in the Inbox and Sent items folders with the
new ones.
43
Menu functions
Press Menu, and select Messages, Message settings, Text messages and
Overwriting in inbox or Overwriting in sent items. Select Allowed to set
the phone to replace the old text messages with new ones in the Inbox
or the Sent items folder, respectively.
Settings for multimedia messages
Press Menu, and select Messages, Message settings and Multimedia
msgs.. Select
• Save sent messages. Select Yes to set the phone to save sent
multimedia messages in the Sent items folder. If you select No, the
sent messages are not saved.
• Delivery reports to ask the network to send delivery reports about
your messages (network service)
• Scale image down to define the image size for the multimedia
messages you are writing.
• Allow multimedia reception. Choose No, Yes or In home network to
use the multimedia service. If you choose In home network, you
cannot receive multimedia messages when outside your home
network. The default setting is In home network.
• Incoming multimedia messages. Select Retrieve to set the phone to
automatically fetch newly received multimedia messages, or select
Reject if you do not wish to receive multimedia messages. This
setting is not shown if the Allow multimedia reception is set to No.
• Connection settings. Define connection settings for retrieving
multimedia messages. Activate the set in which you want to save the
connection settings and then edit the active settings.
Select each of the settings one by one and key in all the required
settings. Contact your network operator or service provider for the
the settings.
• Settings’ name. Key in the new name for the connection set and
press OK.
• Homepage. Key in the homepage address of the service provider
that you want to use, press
for a dot, and press OK.
• Session mode. Select Permanent or Temporary.
• Data bearer. Select GPRS.
44
Menu functions
• Bearer settings to set the settings for the selected bearer.
• GPRS access point. Key in the access point name to establish a
connection to a GPRS network and press OK.
• IP address. Key in the address, press
OK.
for a dot, and press
• Authentication type. Select Secure or Normal.
• User name. Key in the user name and press OK.
• Password. Key in the password and press OK.
• Allow adverts. You can receive or reject advertisements. This setting
is not shown if the Allow multimedia reception is set to No.
To receive the multimedia connection settings as an OTA message
You may receive the multimedia connection settings as an OTA message
from the network operator or service provider. For more information,
contact your network operator or service provider.
Font size setting
To select the font size for reading and writing messages, press Menu,
and select Messages, Message settings, Other settings and Font size.
Service commands
Press Menu, and select Messages and Service commands. Key in and
send service requests (also known as USSD commands), such as
activation commands for network services, to your service provider.
■ Call register (Menu 2)
The phone registers the phone numbers of missed,
received and dialled calls, and the approximate length
and cost of your calls.
The phone registers missed and received calls only if the network
supports these functions, the phone is switched on and within the
network’s service area.
When you press Options in the Missed calls, Received calls and Dialled
numbers menu, you can, for example, view the date and the time of the
45
Menu functions
call, edit or delete the phone number from the list, save the number in
Contacts or send a message to the number.
Recent calls lists
Press Menu, and select Call register and then select
• Missed calls to view the list of the last ten phone numbers from
which somebody has tried to call you (network service). The number
in front of the (name or) phone number indicates the amount of call
attempts from that caller.
Tip: When a note about missed calls is displayed, press List to
access the list of phone numbers. Scroll to the number you
would like to call back and press
• Received calls to view the list of the last ten phone numbers from
which you have most recently accepted calls (network service).
• Dialled numbers to view the list of the 20 phone numbers that you
have most recently called or attempted to call. See also Last number
redialling on page 23.
• Delete recent call lists to delete the recent calls lists. Select whether
you want to delete all the phone numbers in the recent calls lists, or
only those numbers in the missed calls, received calls or dialled
numbers lists. You cannot undo the operation.
Call counters and call timers
Note: The actual invoice for calls and services from your service
provider may vary, depending on network features, rounding off for
billing, taxes and so forth.
Press Menu, and select Call register and then select
• Call duration, scroll to view the approximate duration of your
incoming and outgoing calls in hours, minutes and seconds. The
security code is required to clear the timers.
If you have two phone lines available (network service), each phone
line has its own call duration timers. The timers of the currently
selected line are displayed. Refer to Line for outgoing calls on page
57.
46
Menu functions
• Call costs (network service). Select Last call units or All calls’ units to
check the cost of your most recent call or all calls in terms of units
specified within the Show costs in function.
Select Call cost settings and select Clear counters to clear the
counters, or select Show costs in to set the phone to show the
remaining talk time in terms of charging units, Units, or units of
currency, Currency. Contact your service provider for charging unit
prices.
Select Call cost limit to limit the cost of your calls to a certain
amount of charging units or units of currency. The PIN2 code is
required for the call cost settings.
Note: When no more charging units or currency units are left, calls may
only be possible to the official emergency number programmed into the
device.
• GPRS data counter. Scroll to check the amounts of data that were
sent or received in the last session, data sent and received in total,
and to clear the counters. The counter unit is a byte. The security
code is required to clear the counters.
• GPRS connection timer. Scroll to check the duration of the last GPRS
connection or the total GPRS connection time. You can also clear the
timers. The security code is required to clear the timers.
■ Contacts (Menu 3)
You can save names and phone numbers (contacts) in
the phone’s memory and in the SIM card’s memory.
• The phone’s memory may save up to 500 names with numbers and
text notes about each name. You can also save an image for a certain
number of names. The number of names that can be saved depends
on the length of the names, and the number and length of the phone
numbers and text items.
Contacts use shared memory, see Shared Memory on page 7.
• The phone supports SIM cards that can save up to 250 names and
phone numbers. Names and numbers saved in the SIM card’s
memory, are indicated by
47
Menu functions
Selecting settings for contacts
Press Menu and select Contacts and Settings. Select
• Memory in use to select the memory you want to use for your
contacts. To recall names and numbers from both memories for
contacts, select Phone and SIM. In that case, the names and numbers
will be saved in the phone’s memory.
• Contacts view to select how the names, numbers and images in
contacts are displayed.
• Memory status to see how many names and phone numbers are
currently saved and how many can still be saved in the selected
memory for contacts.
Saving names and phone numbers (Add name)
Names and numbers will be saved in the used memory, see Selecting
settings for contacts above.
1. Press Menu and select Contacts and Add contact.
2. Key in the name and press OK. See Using traditional text input on
page 27.
3. Key in the phone number, and press OK. To key in the numbers, see
Making a call on page 23.
4. When the name and number are saved, press Done.
Tip: Quick save In standby mode, key in the phone number. Press
Options, and select Save. Key in the name, press OK and Done.
Saving multiple numbers and text items per name
You can save different types of phone numbers and short text items per
name in the phone’s internal memory for contacts.
The first number saved is automatically set as the default number and it
is indicated with a frame around the number type indicator, for example
. When you select a name from contacts, for example to make a call,
the default number is used unless you select another number.
1. Make sure that the memory in use is either Phone or Phone and SIM.
See Selecting settings for contacts on page 48.
48
Menu functions
2. To access the list of names and phone numbers, press
standby mode.
in
3. Scroll to the name saved in the phone’s internal memory for the
contact to which you want to add a new number or text item, and
press Details.
4. Press Options and select Add number or Add detail.
5. Select one of the following number types
Home,
Office and
Fax,
or text types
address and
E-mail address,
Note.
General,
Web address,
Mobile,
Postal
To change the number or text type, select Change type in the options
list.
6. Key in the number or text item and press OK to save it.
7. Press Back and then Exit to return to standby mode.
Changing the default number
Press
in standby mode, scroll to the name you want and press
Details. Scroll to the number you want to set as the default number.
Press Options and select Set as default.
Adding an image to a name or number in contacts
You can add an image in supported format to a name or number saved in
the phone’s internal memory.
Press
in standby mode, scroll to the name (and number) you want
to add an image to and press Details. Press Options and select Add
image. The phone opens the list of folders in the Gallery. Scroll to the
desired image, press Options and select Save to contacts. A copy of the
image is added to the contact.
Searching for a name in contacts
1. Press Menu and select Contacts and Search.
2. You can key in the first characters of the name you are searching for
in the pop-up window.
Press
and
and
to scroll through the names in the list, and
to move the cursor in the pop-up window.
49
Menu functions
3. Scroll to the name you want, and press Details. Scroll to view the
details of the selected name.
Tip: To quickly find a name and phone number, press
in
standby mode. Key in the first letter(s) of the name, and/or scroll
to the name you want.
Tip: To quickly view a specific name with the default phone
number, press and hold
at the name while scrolling
through the names.
Editing a name, number or text item or changing an
image
Search for the name (and number) you want to edit and press Details.
Scroll to the name, number, text item or image, and press Options.
Select Edit name, Edit number, Edit detail or Change image and edit the
name, number or text or change the image and press OK.
Deleting names, numbers and images
Press Menu and select Contacts and Delete. Deleting a name and
number will also delete an image attached to it.
• To delete names and numbers one by one, select One by one and
scroll to the name (and number) you want to delete. Press Delete and
press OK to confirm.
• To delete names and numbers in contacts all at once, select Delete all
and then scroll to either of the memories Phone or SIM card and
press Delete. Press OK and confirm with the security code.
Deleting numbers, text items or images
Press
in standby mode, scroll to the desired name (and number)
and press Details. Scroll to the number or text item you want to delete,
press Options and select Delete number or Delete detail, respectively. If
you have an image attached to the name or number and you want to
delete it, press Options and select Delete image. Deleting an image from
contacts does not delete it from Gallery.
50
Menu functions
Copying contacts
You can copy names and phone numbers from the phone’s memory to
your SIM card’s memory and vice versa. Note that any text items saved
in the phone’s internal memory, such as e-mail addresses, will not be
copied to the SIM card.
1. Press Menu and select Contacts and Copy.
2. Select the copying direction, From phone to SIM card or From SIM
card to phone.
3. Select One by one, All or Default numbers.
• If you select One by one, scroll to the name you want to copy and
press Copy.
Default numbers is shown if you copy from the phone to the SIM
card. Only the default numbers will be copied.
4. To choose whether you want to keep or delete the original names
and numbers, select Keep original or Move original.
• If you select All or Default numbers, press OK when Start
copying? or Start moving? is displayed.
Sending and receiving a business card
You can send and receive a person’s contact information from a
compatible device as a business card either via IR or as an Over The Air
(OTA) message if supported by the network.
Receiving a business card
To receive a business card via IR, make sure that your phone is ready to
receive data through its IR port, see Infrared on page 82. The user of the
other phone can now send the name and phone number via Infrared.
When you have received a business card via IR or as an OTA message,
press Show. Press Save to save the business card in the phone’s memory.
To discard the business card, press Exit and then OK.
Sending a business card
You can send a business card via IR or as an OTA message to a
compatible phone or other compatible device which supports the vCard
51
Menu functions
standard. You can also send an image attached to the business card via
IR, if you have saved images in the phone’s memory.
1. To send a business card, search for the name and phone number you
want to send from contacts, press Details and Options and select
Send bus. card.
2. To send the business card via IR, make sure that the other phone or
the PC is set up to receive data via its IR port and select Via infrared.
To send the business card as an Over The Air (OTA) message, select
Via text message.
Speed dials
To assign a number to a speed-dialling key, press Menu and select
Contacts and Speed dials and scroll to the speed-dialling key number
that you want.
Press Assign, press Search, and select first the name and then the
number you want to assign. If a number has already been assigned to
the key, press Options, and you can view, change or delete the assigned
number. If the Speed dialling function is off, the phone asks whether you
want to activate it. Press Yes to activate the function. Refer to Speed
dialling on page 56.
To make a call using the speed-dialling keys, see Speed dialling a phone
number on page 23.
Info numbers and service numbers
Your service provider may have included information numbers or service
numbers in your SIM card.
Press Menu and select Contacts and Info numbers or Service numbers.
Scroll through a category to an information number, or to a service
number, and press
to call the number.
My numbers
The phone numbers assigned to your SIM card are saved in My numbers
if this is allowed by the card. To view the numbers press Menu and select
52
Menu functions
Contacts and My numbers. Scroll to the desired name or number, and
press View.
Caller groups
You can arrange the names and phone numbers saved in Contacts into
caller groups. For each caller group, you can set the phone to sound a
specific ringing tone and show a selected graphic on the display when
you receive a call from a phone number in the group, see below. To set
the phone to ring only upon calls from identified phone numbers
belonging to a selected caller group, see Alert for in Tone settings on
page 60.
Press Menu and select Contacts and Caller groups and select the desired
caller group. Select
• Group name, key in a new name for the caller group and press OK.
• Group ringing tone and select the ringing tone for the group. Default
is the ringing tone selected for the currently active profile.
• Group logo and select On to set the phone to display the group logo,
Off not to display it, or View to view the logo.
• Group members to add a name to the caller group. If there are no
names in the group, press Add, or otherwise, press Options and
select Add contact. Scroll to the name you want to add to the group
and press Add.
To remove a name from a caller group, scroll to the name you want to
remove, and press Options and select Remove contact.
■ Profiles (Menu 4)
Your phone has various setting groups, profiles, for
which you can customise the phone tones for different
events and environments. Initially, personalise the profiles to your own
liking and then you only need to activate a profile to use it. Available
profiles are General, Silent, Meeting, Outdoor, and Pager.
Press Menu, and select Profiles. Scroll to a profile and press Select.
53
Menu functions
• To activate the selected profile, select Activate.
• To set the profile to be active for a certain amount of time up to 24
hours, select Timed and set the end time. When the time set for the
profile expires, the previous profile that was not timed, becomes
active.
• To personalise the profile, select Personalise. Select the setting you
want to change and make the changes. The same settings can also be
changed in the Tone settings menu, see Tone settings on page 60.
To rename a profile, Profile name. The General profile cannot be
renamed.
Tip: To change the profile quickly in standby mode, press the
power key , scroll to the profile you want to activate and press
Select.
■ Settings (Menu 5)
Personal shortcuts
You can add some specific functions to your personal shortcut list and
activate them either by pressing Go to or accessing the Go to menu.
Refer to Go to (Menu 15) on page 93 and Standby mode on page 13.
To select the name for the right selection key and the functions for your
personal shortcut list, press Menu, and select Settings and Personal
shortcuts.
• To select the name for the right selection key displayed in standby
mode, select Right selection key. Select an operator specific name,
Go to or Contacts.
• To select the desired functions for your personal shortcut list, select
Select Go to options and the list of available functions is shown.
Scroll to the desired function and press Mark to add it to the
shortcut list.
To remove a function from the list, press Unmark.
54
Menu functions
• To rearrange the functions on the list, select Organise and the
desired function. Press Move and select where you want to move the
function.
Time and date settings
Clock
Press Menu, and select Settings, Time and date settings and Clock.
Select Show clock (or Hide clock) to show (or hide) the time on the top
right of the display in standby mode. Select Set the time to adjust the
clock to the correct time, and Time format to select the 12-hour or 24hour time format.
The clock serves the functions Messages, Call register, Alarm clock,
timed Profiles, Calendar and screen saver, for example.
If the battery is removed from the phone or if it is flat for a long time,
you may need to set the time again.
Date
Press Menu, and select Settings, Time and date settings and Date.
Select Show date (or Hide date) and the date is shown (or hidden) on the
display when the phone is in standby mode. Select Set the date to adjust
the date. You can also select the date format and date separator.
Auto update of date and time
Press Menu, and select Settings, Time and date settings and Autoupdate of date & time (network service). To set the phone to
automatically update the time and date according to the current time
zone, select On. To set the phone to ask for a confirmation before the
update, select Confirm first.
The automatic update of the date and time does not change the time
that you have set for the alarm clock, calendar or the alarm notes. They
are in local time. Updating may cause some alarms that you have set to
expire.
For information on availability, contact your network operator or service
provider.
55
Menu functions
Call settings
Call divert
Press Menu, and select Settings, Call settings and Call divert (network
service). With call divert, you can direct your incoming calls to another
number, for example to your voice mailbox number. For details, contact
your service provider. Divert options not supported by your SIM card or
your network operator may not be shown.
Select the divert option you want, for example, select Divert if busy to
divert voice calls when your number is busy or when you reject an
incoming call.
To set the divert setting to on, select Activate and then select the
timeout after which the call is diverted, if this is available for the divert
option. To set the divert setting to off, select Cancel, or select Check
status, if this is available for the divert option, to check whether call
divert is activated or not. Several divert options may be active at the
same time.
To see the divert indicators in standby mode, see Standby mode on page
13.
Anykey answer
Press Menu, and select Settings, Call settings and then Anykey answer.
Select On and you can answer an incoming call by briefly pressing any
key, except , selection keys
and
, and
Automatic redial
Press Menu, and select Settings, Call settings and Automatic redial.
Select On and your phone will make a maximum of ten attempts to
connect the call after an unsuccessful call attempt.
Speed dialling
Press Menu, and select Settings, Call settings and Speed dialling. Select
On and the names and phone numbers assigned to the speed-dialling
keys, from
to
, can be dialled by pressing and holding the
corresponding number key.
56
Menu functions
Call waiting
Press Menu, and select Settings, Call settings and Call waiting. Select
Activate and the network will notify you of an incoming call while you
have a call in progress (network service). See Call waiting on page 24.
Summary after call
Press Menu, and select Settings, Call settings and Summary after call.
Select On and the phone will briefly display the approximate duration
and cost (network service) of the call after each call.
Send my caller identity
Press Menu, and select Settings, Call settings and Send my caller
identity. Select Yes and your phone number will be displayed to the
person you are calling (network service). Select Set by network and the
setting agreed upon with your service provider is used.
Line for outgoing calls
Line for outgoing calls is a network service to select the phone line 1 or
2, that is, the subscriber number, for making calls. For example, you can
have a private and a business line. For more information on availability,
contact your network operator or service provider.
Press Menu, and select Settings, Call settings and Line for outgoing calls.
If you select Line 2 and have not subscribed to this network service, you
will not be able to make calls. However, calls on both lines can be
answered regardless of the selected line.
If supported by your SIM card, you can prevent the line selection by
selecting the option Lock.
Tip: In standby mode, you can switch from one line to the other
by pressing and holding
Phone settings
Language
Press Menu, and select Settings, Phone settings and Language. Select
the language for the display texts. If Automatic is selected, the phone
selects the language according to the information on the SIM card.
57
Menu functions
Memory status
Press Menu, and select Settings, Phone settings and Memory status.
Scroll to view the free memory, the total used memory and the memory
used for each function in the list.
You may also find the memory information in the menu of some of those
functions, for example in Gallery.
Automatic keyguard
When the keyguard is on, calls still may be possible to the official emergency
number programmed into your device. Key in the emergency number and press
You can set the keypad of your phone to lock automatically after a preset time delay when the phone is in standby mode and none of the
phone’s functions have been used.
Press Menu, and select Settings, Phone settings and Automatic
keyguard. Select On and set the time delay from 10 seconds to 60
minutes. To deactivate the automatic keyguard, select Off.
Refer also to Keypad lock (Keyguard) on page 20.
Cell info display
Press Menu, and select Settings, Phone settings and Cell info display.
Select On to set the phone to indicate when it is used in a cellular
network based on Micro Cellular Network (MCN) technology.
Welcome note
Press Menu, and select Settings, Phone settings and Welcome note. Key
in the note you would like to be shown briefly when the phone is
switched on. To save the note, press Options, and select Save.
Network selection
Press Menu, and select Settings, Phone settings and Network selection.
Select Automatic and the phone automatically selects one of the
cellular networks available in your area.
If you select Manual, you can select a network that has a roaming
agreement with your home network operator. If No access is displayed,
you must select another network. The phone stays in manual mode until
the automatic mode is selected or another SIM card is inserted into the
phone.
58
Menu functions
Confirm SIM service actions
See SIM services (Menu 16) on page 93.
Help text activation
To set the phone to show or not to show the help texts, press Menu, and
select Settings, Phone settings and Help text activation.
See also Using the menu on page 29.
Start-up tone
To set the phone to play or not to play a start-up tone when the phone is
switched on, press Menu, and select Settings, Phone settings and Startup tone.
Display settings
Wallpaper
You can set your phone to display a background image, known as
wallpaper, when the phone is in standby mode. Some images are presaved in the Gallery menu. You can also receive images, for example, via
multimedia messages, or transfer them with PC Suite from a compatible
PC and then save them in Gallery. Your phone supports JPEG, GIF, BMP
and PNG formats but not necessarily all variations of these file formats.
Press Menu, and select Settings, Display settings and Wallpaper.
• Select Change image and open an image folder. Scroll to the image
you want to set as wallpaper, press Options and select Set as
wallpaper.
• To activate/deactivate the wallpaper, select On/Off, respectively.
Note that the wallpaper is not displayed when the phone activates the
screen saver.
Colour schemes
You can change the colour in some display components, for example,
indicators and signal and battery bars.
Press Menu, and select Settings, Display settings and Colour schemes.
Select the desired colour scheme.
59
Menu functions
Menu view
To select the way the phone displays the main menu, press Menu, and
select Settings, Display settings and Menu view. Select List for the menu
list view and Grid for the menu grid view.
Operator logo
To set your phone to display or hide the operator logo, press Menu, and
select Settings, Display settings and Operator logo. If you have not saved
the operator logo, the Operator logo menu is dimmed.
Note that the operator logo is not displayed when the phone activates
the screen saver.
For more information on availability of an operator logo, contact your
network operator or service provider. See also PC Suite on page 94.
Screen saver
The digital clock screen saver is used for power saving in standby mode.
It is activated when none of the phone’s functions have been used for a
certain time. Press any key to deactivate the screen saver. The screen
saver is also deactivated when the phone is out of the network coverage
area.
Press Menu, and select Settings, Display settings and Screen saver
timeout. Select the timeout after which the digital clock display will be
activated from 5 seconds to 60 minutes.
Note that the screen saver overrides all the graphics and texts on the
display in standby mode.
Display brightness
You can change the display brightness level used on the phone display.
Press Menu, and select Settings, Display settings and Display brightness.
Scroll with
and
to decrease and increase the brightness level,
and press OK to accept it.
Tone settings
Press Menu, and select Settings and then Tone settings. You can find the
same settings in the Profiles menu, see Profiles (Menu 4) on page 53.
60
Menu functions
Note that the settings you make, will change the settings in the active
profile.
Select Incoming call alert to choose how the phone notifies you of an
incoming voice call. The options are Ringing, Ascending, Ring once, Beep
once and Off.
Select Ringing tone for incoming voice calls. To select ringing tones that
have been saved in the Gallery, select Open gallery from the ringing tone
list.
Select Ringing volume and Vibrating alert for incoming voice calls and
messages. The vibrating alert does not work when the phone is
connected to a charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone via infrared connection or by
downloading, you can save the ringing tone in the Gallery.
Select Message alert tone to set the alert tone for the incoming
messages, Keypad tones, or Warning tones to set the phone to sound
tones, for example, when the battery is running out of power.
Select Alert for to set the phone to ring only upon calls from phone
numbers that belong to a selected caller group. Scroll to the caller group
you want or All calls and press Mark.
Enhancement settings
The enhancement settings menu is shown only if the phone is or has
been connected to some mobile enhancements, chargers and handsfree
units, for example.
Press Menu, and select Settings and Enhancement settings. You can
select Headset, Handsfree, Loopset, Text phone, Music stand or Charger,
if the corresponding enhancement is or has been connected to the
phone. Depending on the enhancement, you can select some of the
following options:
• Default profile to select the profile that you want to be automatically
activated when you connect to the selected enhancement. You can
select another profile while the enhancement is connected.
61
Menu functions
• Automatic answer to set the phone to answer an incoming call
automatically after five seconds. If the Incoming call alert is set to
Beep once or Off, automatic answer will not be used.
• Lights to set the lights permanently On. Select Automatic to set the
lights on for 15 seconds after a keypress.
• When the phone is connected to the full car kit, select Ignition
detector and On to automatically switch off the phone
approximately 20 seconds after you have switched off the car’s
ignition.
• For Text phone, select Use text phone and select Yes to use the text
phone settings instead of headset or loopset settings.
Security settings
When security features that restrict calls are in use (such as call barring, closed
user group and fixed dialing) calls still may be possible to the official emergency
number programmed into your device.
Press Menu, and select Settings and Security settings. Select
• PIN code request to set the phone to ask for your PIN code every time
the phone is switched on. Some SIM cards do not allow the PIN code
request to be turned off.
• Call barring service (network service) to restrict incoming calls to and
outgoing calls from your phone. A barring password is required.
• Fixed dialling to restrict your outgoing calls and text messages to
selected phone numbers if this function is supported by your SIM
card. The PIN2 code is required.
When the fixed dialling is on, GPRS connections are not possible
except while sending text messages over a GPRS connection. In this
case, the recipient’s phone number and the message centre number
have to be included on the fixed dialling list.
• Closed user group. Closed user group is a network service that
specifies the group of people whom you can call and who can call
you. For more information contact your network operator or service
provider.
62
Menu functions
• Security level. Select Phone and the phone will ask for the security
code whenever a new SIM card is inserted into the phone.
Select Memory and the phone will ask for the security code when the
SIM card’s memory is selected and you want to change the memory
in use, (see Selecting settings for contacts on page 48) or copy from
one memory to another (Copying contacts on page 51).
• Access codes to change the security code, PIN code, PIN2 code or
barring password. Codes can only include numbers from 0 to 9.
Restore factory settings
To reset some of the menu settings to their original values, press Menu,
and select Settings and Restore factory settings. Key in the security code
and press OK. Note that the data you have keyed in or downloaded, for
example, the names and phone numbers saved in Contacts are not
deleted.
■ Radio (Menu 6)
The FM radio uses the wire of the headset as an antenna. A
compatible headset needs to be attached to the device for the
FM radio to function properly.
Note that the quality of the radio broadcast depends on the radio
station’s coverage in that particular area.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
1. To turn on the radio, press Menu and select Radio. The display shows
the
• Channel location number and the name of the radio channel if
you have saved the channel.
• Frequency of the radio channel.
2. If you have already saved radio channels, you can scroll to the
channel you would like to listen to, or select a radio channel location
1 to 9 by pressing the corresponding number key.
When using the compatible headset supplied with the headset key,
press the key to scroll to the desired saved radio channel.
63
Menu functions
3. When the radio is on, press Options and select Switch off to turn off
the radio.
Tip: To quickly turn off the radio, press and hold
Tuning a radio channel
When the radio is on, press and hold
or
to start the channel
search. Searching stops when a channel is found. To save the channel,
press Options, and select Save channel. Key in the name of the channel
and press OK. Select the location where you want to save the channel.
Tip: To quickly save the channel in a location 1 to 9, press and
hold the corresponding number key, then key in the name of the
channel and press OK.
Using the radio
When the radio is on, press Options and select
• Switch off to turn off the radio.
• Save channel to save the radio channel you have found, refer to
Tuning a radio channel above. Up to 20 radio channels can be saved.
• Automatic tuning. Briefly press
or
to start the channel
search upwards or downwards. The search stops when a channel has
been found, press OK. To save the channel, see Save channel above.
• Manual tuning. Briefly press
or
to move the channel
search 0.1 MHz upwards or downwards or press and hold down the
keys to quickly search upwards or downwards for a channel. To save
the channel, press OK and see Save channel above.
Tip: To quickly select Manual tuning, press
Radio menu.
when in the
• Set frequency. If you know the frequency of the radio channel you
would like to listen to (between 87.5 MHz and 108.0 MHz), key it in
and press OK. To save the channel, see Save channel above.
Tip: To quickly select Set frequency, press
Radio menu.
when in the
• Delete channel. To delete a saved channel, scroll to it, press Delete,
and OK.
64
Menu functions
• Rename. Key in a new name for the saved channel and press OK.
• Loudspeaker (or Headset) to listen to the radio using the loudspeaker
(or headset). Keep the headset connected to the phone. The lead of
the headset functions as the radio antenna.
• Mono output (or Stereo output) to listen to the radio in mono (or in
stereo).
You can normally make a call or answer an incoming call while listening
to the radio. The volume of the radio is muted. When you end the call,
the radio will automatically be turned on.
When an application using a GPRS or HSCSD connection is sending or
receiving data, it may interfere with the radio.
■ Camera (Menu 7)
In this menu you can take photos with the phone’s
built-in camera and adjust its settings. The camera
lens is on the back of the phone, and the display of the phone works as a
viewfinder. The camera produces JPEG pictures.
If there is not enough memory to take a new photo, you need to free
some by deleting old photos or other files in the gallery. Note that the
camera uses shared memory, see Shared Memory on page 7.
The Nokia 6610i phone supports an image capture resolution of 352 x 288 pixels.
The image resolution in these materials may appear different.
To take a photo
1. Press Menu, and select Camera and Standard photo, Portrait photo
or if the lighting is dim for taking photos, select Night mode. If you
want to add the photo to a name/phone number saved in contacts,
select Portrait photo.
Tip: To quickly open the camera viewfinder with standard
photo view, press
in standby mode.
2. The live image appears on the display, and you can use the display as
a viewfinder.
65
Menu functions
3. To take a photo, press Capture. The phone saves the photo in the
Photos folder of the Gallery menu. The saved photo will be shown on
the display.
To define the default title for the photo, see Default title in Camera
settings on page 66.
4. Select Back to take another photo, or press Options and select, for
example, an option to delete or rename the saved photo, send it as a
multimedia message, or attach the photo to a name or phone
number in contacts, or access the gallery.
Tip: You can activate the self-timer of the camera for one picture
at a time. Press Menu, and select Camera, Self-timer and
Standard photo, Portrait photo or Night mode. Press Start, and
after the timeout, the camera takes the photo and saves it in the
Gallery menu. While the self-timer is running, a beeping sound is
heard.
Camera settings
Press Menu, and select Camera and Settings. Select
• Image quality to define how much the photo file will be compressed
when saving the image. Select High, Normal or Basic. High provides
the best image quality but takes more memory.
• Camera sounds to set the shutter sound and the self-timer tone to
On or Off.
• Default title to define the title that will be used when saving a photo.
If you select Automatic, the default title will be used, or if you select
My title, you can key in or edit a new title.
■ Gallery (Menu 8)
In Gallery you can manage images, photos and tones
saved in your phone.
The gallery uses shared memory, see Shared Memory on page 7.
1. Press Menu and select Gallery. The list of options is shown.
2. Select View folders to open the list of folders.
66
Menu functions
Other available options are:
• Add folder to add a new folder. Key in a name for the folder and
press OK.
• Delete folder to select the folder you want to delete. You cannot
delete the original folders on the phone.
• Rename folder to select the folder you want to rename. You
cannot rename the original folders on the phone.
• Gallery downloads to download more images and tones. Select
Image downloads or Tone downloads, respectively. The list of
available browser bookmarks is shown. Select More bookmarks to
access the list of bookmarks in the Services menu, see Bookmarks
on page 88.
Select the appropriate bookmark to connect to the desired page.
If the connection fails, you may not be able to access the page
from the service whose connection settings are currently active.
In this case, enter the Services menu and activate another set of
service settings, see Making a connection to a service on page 86.
Try again to connect to the page.
For the availability of different services, pricing and tariffs,
contact your network operator and/or the service provider.
Download content only from the sources you trust.
3. Open the folder you want and the list of files in the folder is shown.
Photos, Graphics and Tones are the original folders in the phone.
Press Options and some of the following options are available:
• Open to open the selected file.
• Delete to delete the selected file.
• Send to send the selected file via MMS.
• Move to move a file to another folder.
• Rename to give a new name to the file.
• Set as wallpaper to set the selected image file as wallpaper.
• Set as ring tone to set the selected sound file as the ringing tone.
• Details to see the details of the file, for example the size of the
file.
67
Menu functions
• Sort to sort the files and folders by date, type, name or size.
• Delete all to delete all the files in the selected folder.
• Edit image to insert text, a frame or clip-art into the selected
picture.
4. Open the file you want. Press Options and some of the following
options are available:
• Play (Pause) to listen to or to view a sound or image file that is
contained in the message.
• Zoom to increase the size of the image that is contained in the
message.
• Mute audio (Unmute audio) to mute (unmute) the sound file.
• Set contrast to adjust the contrast level of the image.
• Set as wallpaper to set the selected image file as wallpaper.
• Set as ring tone to set the selected sound file as the ringing tone.
• Edit image to insert text, a frame or clip-art to the selected
picture.
• Details to see the details of the file, for example the size of the
file.
• Delete to delete the selected file.
• Send to send the selected file via MMS.
• Rename to give a new name to the file.
• View in sequence to view the files in the folder sequentially.
Note that copyright protections may prevent some images, ringing
tones and other content from being copied, modified, transferred or
forwarded.
■ Organiser (Menu 9)
Alarm clock
The alarm clock uses the time format set for the clock. The alarm clock
works even when the phone is switched off if there is enough power in
the battery.
68
Menu functions
Press Menu, and select Organiser and Alarm clock.
• Select Alarm time, key in the alarm time and press OK.
To change the alarm time, select On.
• Select Alarm tone and select the default alarm tone, personalise the
alarm tone by selecting one from the ringing tone list or from the
gallery, or set a radio channel as the alarm tone.
If you select the radio as an alarm tone, connect the headset to the
phone. The phone uses the most recent channel you listened to as an
alarm tone via the loudspeaker. If the headset is removed, the default
alarm tone will be used instead of the radio.
When the alarm time expires
The phone will sound an alert tone, and flash Alarm! and the current
time on the display.
Press Stop to stop the alarm. If you let the phone continue to sound the
alarm for a minute or press Snooze, the alarm stops for about ten
minutes and then resumes.
If you have selected the radio as an alarm tone, instead of Snooze the
phone asks whether you want to switch off the radio or not.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you press Stop, the device asks
whether you want to activate the device for calls. Press No to switch off the
device or Yes to make and receive calls. Do not press Yes when wireless phone use
may cause interference or danger.
Calendar
The calendar helps you to keep track of reminders, calls that you need to
make, meetings, and birthdays.
The calendar uses shared memory, see Shared Memory on page 7.
Press Menu, and select Organiser and Calendar.
Tip: To quickly open the Calendar menu, press
mode.
in standby
Scroll to the day you want. The current day is indicated by a frame
around the day. If there are any notes set for the day, the day is in bold
type. To view the day notes, press Options and select Day notes.
69
Menu functions
• To view a single note, scroll to the note you want to view, press
Options and select View. The note view allows you to view the
details of the selected note. You can scroll through the note.
• For example, there are also options for making a note, or for sending
a note via IR, or as a note directly to another compatible phone’s
calendar or as a text message.
There are also options for deleting, editing, moving and repeating a
note and for copying a note to another day.
Settings to set the date, time, date or time format, or the first day of
the week. In the Auto-delete option you can set the phone to delete
old notes automatically after a specified time. However, the repeat
notes, for example, birthday notes, will not be deleted.
Making a calendar note
For keying in letters and numbers, see Writing text on page 26.
Press Menu, and select Organiser and Calendar. Scroll to the date you
want, press Options and select Make a note. Select one of the following
note types:
•
Meeting - Key in the note (or press Options and search for the
name in contacts). Press Options and select Save. Key in the location
for the meeting and press Options and select Save. Key in the start
time for the meeting and press OK, and then the end time and press
OK. To set the alarm for the note, select With tone or Silent (no alarm
tone) and then set the alarm time.
•
Call - Key in the phone number, press Options and select Save.
Key in the name, press Options and select Save. (Instead of keying in
the phone number, press Options to search for the name and number
in contacts.) Then key in the time for the call and press OK. To set the
alarm for the note, select With tone or Silent (no alarm tone) and
then set the alarm time.
•
Birthday - Key in the person’s name (or press Options and search
for it in contacts), press Options and select Save. Then key in the year
of birth, and press OK. To set the alarm for the note, select With tone
or Silent (no alarm tone) and then set the alarm time.
70
Menu functions
•
Memo - Key in the note, press Options and select Save. Key in the
end day for the note and press OK. To set the alarm for the note,
select With tone or Silent (no alarm tone) and then set the alarm
time.
•
Reminder - Key in the subject for the reminder, press Options and
select Save. To set the alarm for the note, select Alarm on and then
set the alarm time.
When you have set the alarm, the indicator
view the notes.
is displayed when you
When the phone sounds an alarm for a note
The phone beeps, and displays the note. With a call note
on the
display, you can call the displayed number by pressing
. To stop
the alarm and view the note, press View. To stop the alarm without
viewing the note, press Exit.
To-do list
You can save a note for a task that you have to do, select a priority level
for the note and mark it as done when you have completed it. You can
sort the notes by priority or by date.
The to-do list uses shared memory, see Shared Memory on page 7.
Press Menu, and select Organiser and To-do list and the list of notes is
shown. Press Options, or scroll to the desired note and press Options.
• To add a new note, select Add. Key in the subject for the note. When
you have keyed in the maximum number of characters for a note, no
further characters are accepted. Press Options and select Save.
Select the priority for the note, High, Medium, or Low. The phone
automatically sets the deadline without an alarm for the note. To
change the deadline, view the note and select the option for the
deadline.
Dictionary, refer to Setting predictive text input on or off on page 26.
• For example, you can also view and delete the selected note and
delete all the notes that you have marked as done. You can sort the
notes by priority or by deadline, send a note to another phone, save a
note as a calendar note, or access the calendar.
71
Menu functions
While viewing a note, you can also, for example, select an option to
edit the selected note, edit the deadline or priority for the note, or
mark the note as done.
■ Games (Menu 10)
Launching a game
1. Press Menu, and select Games and Select game.
2. Scroll to a game or a game set (the name depends on the game).
3. Press Options and select Open or press
single game it will be launched.
. If the selection is a
Otherwise, a list of games in the selected game set is displayed. To
launch a single game, scroll to the desired game and press Options
and select Open, or press
Note that running some games may consume the phone’s battery faster
(and you may need to connect the phone to the charger).
Other options available for a game or game set
Options for games, see Other options available for an application or
application set on page 74 .
Game downloads
Press Menu, and select Games and Game downloads. The list of
available bookmarks is shown. Select More bookmarks to access the list
of bookmarks in the Services menu, see Bookmarks on page 88.
Select the appropriate bookmark to connect to the desired page. If the
connection fails, you may not be able to access the page from the
service whose connection settings are currently active. In this case,
enter the Services menu and activate another set of service settings, see
Making a connection to a service on page 86. Try again to connect to the
page.
For the availability of different services, pricing and tariffs, contact your
network operator and/or the service provider.
72
Menu functions
To download more games, refer also to Downloading an application on
page 74.
Note that when downloading a game, it may be saved in the
Applications menu instead of the Games menu.
Important: Only install applications from sources that offer adequate
protection against harmful software.
Memory status for games
To view the amount of memory available for game and application
installations, press Menu, and select Games and Memory. See also
Memory status for applications on page 75.
The games use shared memory, see Shared Memory on page 7.
Game settings
Press Menu, and select Games and Settings to set sounds, lights and
shakes for the game.
■ Applications (Menu 11)
Launching an application
1. Press Menu, and select Applications and Select application.
2. Scroll to an application or an application set (the name depends on
the application).
3. Press Options and select Open or press
single application it will be launched.
. If the selection is a
Otherwise, a list of applications in the selected application set is
displayed. To launch a single application, scroll to the desired
application and press Options and select Open, or press
Note that running some applications may consume the phone’s battery
faster (and you may need to connect the phone to the charger).
73
Menu functions
Other options available for an application or application
set
• Delete to delete the application or application set from the phone.
Note that if you delete a pre-installed application or an application
set from your phone, you may download it again to your phone from
the Nokia Software Market, http://www.softwaremarket.nokia.com/
wap.
• Web access to restrict the application from accessing the network.
Select Ask first to set the application to ask for your permission to
connect to the network, or Allowed / Not allowed to allow or not
allow the connection.
• Update version to check if a new version of the application is
available for download from the services (network service).
• Web page to provide further information or additional data for the
application from an Internet page. This feature needs to be
supported by the network. It is only shown if an Internet address has
been provided with the application.
• Service settings for some applications that need specific service
settings. Your phone is set to use as default the service settings for
the browser.
• Details to give additional information about the application.
Downloading an application
Your phone supports Java technology (J2ME) applications. Make sure
that the application is compatible with your phone before downloading
it. You can download new Java applications in different ways:
• Press Menu, and select Applications and App. downloads and the list
of available bookmarks is shown. Select More bookmarks to access
the list of bookmarks in the Services menu, see Bookmarks on page
88.
Select the appropriate bookmark to connect to the desired page. If
the connection fails, you may not be able to access the page from the
service whose connection settings are currently active. In this case,
enter the Services menu and activate another set of service settings,
74
Menu functions
see Making a connection to a service on page 86. Try again to
connect to the page.
For the availability of different services, pricing and tariffs, contact
your network operator and/or service provider.
• Press Menu, and select Services and Download links. Select to
download an appropriate application or game. See Downloading on
page 89.
• Use the game download functionality, see Game downloads on page
72.
• Use the Nokia Application installer from PC Suite to download the
applications in your phone.
Important: Only install applications from sources that offer adequate
protection against harmful software.
Note that when downloading an application, it may be saved in the
Games menu instead of the Applications menu.
Memory status for applications
To view the amount of memory available for game and application
installations, press Menu, and select Applications and Memory.
The applications use shared memory, see Shared Memory on page 7.
■ Extras (Menu 12)
Calculator
The calculator in your phone adds, subtracts, multiplies, divides,
calculates the square and the square root and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
1. Press Menu, and select Extras and Calculator.
2. When ’0’ is displayed on the screen, key in the first number in the
calculation, press
for a decimal point.
3. Press Options and select Add, Subtract, Multiply, Divide, Square,
Square root or Change sign.
75
Menu functions
Tip: Alternatively, press
once to add, twice to subtract,
three times to multiply or four times to divide.
4. Key in the second number.
5. For a total, press Options and select Equals. Repeat steps 3 to 5 as
many times as is necessary.
6. To start a new calculation, first press and hold Clear.
Performing a currency conversion
1. Press Menu, and select Extras and Calculator.
2. To save the exchange rate, press Options and select Exchange rate.
Select either of the displayed options. Key in the exchange rate, press
for a decimal point, and press OK. The exchange rate remains
in the memory until you replace it with another one.
3. To perform the currency conversion, key in the amount to be
converted, press Options and select In domestic or In foreign.
Tip: You can also perform the currency conversion in standby
mode. Key in the amount to be converted, press Options and
select In domestic or In foreign.
Countdown timer
Press Menu, and select Extras and Countdown timer. Key in the alarm
time in hours and minutes and press OK. If you wish, write your own
note text which is displayed when the time expires, and press OK to
start the countdown timer.
• To change the countdown time, select Change time, or to stop the
timer, select Stop timer.
If the alarm time is reached when the phone is in standby mode, the
phone sounds a tone and flashes the note text if it is set or else
Countdown time up. Stop the alarm by pressing any key. If no key is
pressed, the alarm automatically stops within 30 seconds. To stop the
alarm and to delete the note text, press OK.
76
Menu functions
Stopwatch
You can measure time, take intermediate times or lap times using the
stopwatch. During timing, the other functions of the phone can be used.
To set the stopwatch timing in the background, press
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Time observation and time splitting
1. Press Menu, and select Extras, Stopwatch and Split timing. You can
select Continue if you have set the timing in the background.
2. Press Start to start the time observation. Press Split every time you
want to take an intermediate time. The intermediate times are listed
below the running time on the display. Scroll to view the times.
3. Press Stop to stop the time observation.
4. Press Options and select
Start to start the time observation again. The new time is added to
the previous time.
Save to save the time. Key in a name for the measured time and press
OK. If no name is keyed in, the total time is used as the title.
Reset to reset the time without saving it.
Lap times
Press Menu, and select Extras, Stopwatch and Lap timing. Press Start to
start the time observation and Lap to take a lap time. Press Stop to stop
the lap timing. Press Options and you can save or reset the lap times.
Refer to Time observation and time splitting above.
Viewing and deleting times
Press Menu, and select Extras, and Stopwatch.
If the stopwatch is not reset, you can select Show last to view the most
recent measured time. Select View times and a list of names or final
times of the time sets is shown, select the time set you want to view.
To delete the saved times, select Delete times. Select Delete all and press
OK, or select One by one, scroll to the times you want to delete, press
Delete and press OK.
77
Menu functions
Wallet
In Wallet you can save personal information, for example, credit card
numbers and make purchases with your phone where supported by the
service provider.
You can access wallet via the Wallet menu or via the browser, see
Options while browsing on page 87.
When you access wallet for the first time, you need to create your own
wallet code. At Create wallet code: key in the code and press OK to
confirm it and at Verify wallet code: key in the code again and press OK.
If you want to delete all the content of the wallet and the wallet code,
key in *#7370925538# (*#res0wallet# in letters) in standby mode. You
also need the phone’s security code.
See also General information on page 8.
Saving and changing personal card information
To access the wallet, press Menu, select Extras and Wallet. If required,
key in your wallet code and press OK, see Wallet settings on page 79.
Select Cards to view the list of cards. The maximum number of cards is
five. Scroll to the desired card.
• To save information on a card, press Options and select View. Select
• Card info to key in, for example, card holder’s name, card type,
number and expiry information.
• User info to save user name and password for accessing sites.
• Shipping info to save your contact information.
• Billing info to save the contact information in case the invoicing
address differs from your own, for example, with company credit
cards.
• Receipt info to save phone numbers and e-mail addresses where
you want the service provider to send a receipt of your purchase.
• To make a copy of the card, press Options and select Copy card.
• To delete all the information on the card, press Options and select
Clear card.
• To rename the card, press Options and select Rename card.
78
Menu functions
Personal notes
You can save up to 30 confidential personal notes, for example,
passwords, codes or notations.
Press Menu, select Extras, Wallet and Personal notes. Press Options and
you can view, add, edit a selected note and sort notes either by name or
date or delete notes. When viewing a note, the option Edit is for editing
a note, and Send via text msg. copies the note as a text message. Copy to
calendar copies the note to the calendar as a memo. Use detail extracts
numbers, e-mail addresses and web addresses from a note.
Wallet settings
Press Menu, select Extras, Wallet and Settings. Select
• Code request to set the wallet code request to on or off. You need to
key in the correct wallet code before you can set the code request to
on or off. Note that if you set the code request Off, the wallet can be
accessed without a wallet code.
• Change code to change the wallet code.
Guidelines for paying for your purchases with wallet
1. Access the desired site that supports wallet, to do your shopping, see
Making a connection to a service on page 86, and choose the product
you want to buy.
Read carefully all information provided before your purchase.
Note: The text may not fit within a single screen. Therefore,
make sure to scroll through and read all of the text before
signing.
2. To pay for the items you wish to purchase, press Options and select
Use wallet info. See Options while browsing on page 87.
3. Select the card you want to pay with. Fill in the data form you receive
from the service provider by transferring the credit card details from
the wallet. If you want to fill in all the fields automatically, select Fill
in all fields. The option is shown only when the service supports the
Electronic Commerce Modelling Language standard. You can also fill
the form by selecting information fields from the card one by one.
The phone displays the filled form.
4. Approve the purchase, and the information is sent forward.
79
Menu functions
5. You may receive a sign-in document from the service that you need
to sign to make the purchase binding, see Digital signature on page
92.
6. To close the wallet, select Close wallet. See Options while browsing
on page 87.
Synchronisation
Synchronisation allows you to save your calendar and contacts data in a
remote Internet server or in a compatible PC. If you have saved data in
the remote Internet server, you can synchronise your phone by starting
the synchronisation from your phone. Synchronising to the remote
server is a network service. You can also synchronise the data in your
phone’s contacts and calendar to correspond with the data of your
compatible PC by starting the synchronisation from the PC. The contact
data in your SIM card will not be synchronised.
Note that answering an incoming call during synchronisation will end
the synchronisation and you need to start it again.
Synchronising from your phone to a remote server
Before synchronising from your compatible phone, you may need to do
the following:
• Subscribe to a synchronisation service. For more information on
availability and the synchronisation service settings, contact your
network operator or service provider.
• Retrieve the synchronisation settings from your network operator or
service provider.
You may receive the synchronisation settings as an OTA message, see
Saving the synchronisation settings received as an OTA message on
page 81 or you may have to key in the settings manually, see Keying
in the synchronisation settings manually on page 81.
To start the synchronisation from your phone:
1. Press Menu, and select Services, Active service settings and select
the connection settings you need for synchronisation.
80
Menu functions
The synchronisation settings may differ from the service settings
required for browsing. After synchronising, change your Active
service settings back to the previous ones if you want to use other
services later.
2. Mark the data to be synchronised. See Data to be synchronised in
Keying in the synchronisation settings manually on page 81.
3. Press Menu, and select Extras, Synchronisation and Synchronise.
4. The marked data of the active set will be synchronised after
confirmation.
Note that synchronising for the first time or after an interrupted
synchronisation may take time up to 30 minutes, if contacts or
calendar are full.
Saving the synchronisation settings received as an OTA
message
When you receive the synchronisation settings as an OTA message,
Synchronisation settings received is displayed.
Press Options and select Details to view the received settings first, Save
to save the synchronisation settings, or Discard to discard them.
Keying in the synchronisation settings manually
Press Menu, select Extras, Synchronisation and Settings.
Select Active Internet sync. settings.
You need to activate the set where you want to save the
synchronisation settings. A set is a collection of settings required to
make a connection to a service.
Scroll to the set you wish to activate and press Activate.
Select Edit active Internet sync. settings. Select each setting one by one
and key in all the required settings.
• Settings’ name. Key in the name for the set and press OK.
• Data to be synchronised. Mark the data you want to synchronise,
Contacts and/or Calendar, and press Done.
• Database addresses. Select Contacts database and/or Calendar
database to be edited. Key in the name of the database and press
OK.
81
Menu functions
• User name. Key in the user name and press OK.
• Password. Key in the password and press OK.
• Synchronisation server. Key in the name of the server and press OK.
Synchronising from a compatible PC
To synchronise contacts and calendar from a compatible PC, use either
an IR connection or a data cable. You also need the PC Suite software of
your phone installed on the PC. Start the synchronisation from the PC
using PC suite.
■ Connectivity (Menu 13)
Infrared
You can set up the phone to receive data through its infrared (IR) port.
To use an IR connection, the device with which you want to establish a
connection must be IrDA compliant. You can send or receive data such
as business cards and calendar notes to or from a compatible phone or
data device (for example, a computer) via the IR port of your phone.
Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
Sending and receiving data via IR
• Ensure that the IR ports of the sending and receiving devices are
pointing at each other and that there are no obstructions between
the devices. The preferable distance between the two devices in an
infrared connection is 1 metre at most.
• To activate the IR port of your phone to receive data via IR, press
Menu, and select Connectivity and Infrared.
• The user of the sending phone selects the desired IR function to start
data transfer.
If data transfer is not started within 2 minutes after the activation of
the IR port, the connection is cancelled and has to be started again.
IR connection indicator
• When
is shown continuously, the IR connection is activated and
your phone is ready to send or receive data via its IR port.
82
Menu functions
• When
blinks, your phone is trying to connect to the other device
or a connection has been lost.
GPRS
GPRS connection
GPRS is a network service. You can set the phone to automatically
register to a GPRS network when you switch the phone on. Press Menu,
and select Connectivity, GPRS, GPRS connection and Always online.
When you start an application using GPRS, the connection between
phone and network is established, and data transfer is possible. When
you end the application, the GPRS connection is ended but the
registration to the GPRS network remains.
If you select When needed, the GPRS registration and connection are
established when an application using GPRS needs it and closed when
you end the application.
When Always online is selected and the GPRS service is available, the
indicator is shown on the top left of the display. When the GPRS
connection is established, the indicator
is shown. If you receive a call
or a text message, or make a call during a GPRS connection, the
indicator will be shown on the top right of the display to indicate
that the GPRS connection is suspended (on hold).
Note that your phone supports three simultaneous GPRS connections.
For example, you can browse pages, receive multimedia messages and
have an ongoing PC dial-up connection at the same time.
GPRS modem settings
You can connect the phone via an infrared or a data cable connection to
a compatible PC and use the phone as a modem to enable GPRS
connectivity (network service) from the PC.
Press Menu, and select Connectivity, GPRS and GPRS modem settings.
Select Active access point and activate the access point you want to use.
Select Edit active access point to change the access point settings.
• Select Alias for access point. Key in the name you would like for the
activated access point and press OK.
83
Menu functions
• Select GPRS access point. Key in the Access Point Name (APN) to
establish a connection to a GPRS network and press OK. Contact
your network operator or service provider for the access point name.
You can also set the GPRS dial-up service settings (Access Point Name)
on your PC using the Nokia Modem Options software, see PC Suite on
page 94. If you have set the settings both on your PC and on your phone,
note that the PC’s settings will be used.
■ Services (Menu 14)
You can access various services on the Internet. For
example, these services may include weather reports,
news or flight times and financial information.
Check the availability of these services, pricing and tariffs with your
network operator and/or the service provider whose service you wish to
use. The service provider will also give you instructions on how to use
their services.
With your phone’s multi-mode browser you can view the services that
use Wireless Mark-Up Language (WML) or extensible HyperText Markup
Language (xHTML) on their pages. Since the phone’s display and the
memory capacity are much smaller than in a computer, Internet content
is displayed differently on the phone’s display. Note that you may not be
able to view all details on the Internet pages.
Basic steps for accessing and using services
1. Save the service settings that are required to access the service that
you want to use. See page 84.
2. Make a connection to the given service. See page 86.
3. Start browsing the pages of the service. See page 86.
4. Once you are finished browsing, end the connection to the service.
See page 87.
Setting up the phone for a service
You may receive the service settings as an OTA message from the
network operator or service provider that offers the service that you
84
Menu functions
want to use. You can also key in the settings manually or add and edit
the settings with PC Suite.
For more information and for appropriate settings, contact your
network operator or service provider that offers the service that you
want to use. The settings may be available, for example, on their
website.
Saving the service settings received as an OTA message
When you receive the service settings as an OTA message, Service
settings received is displayed.
• To save the received settings, press Options and select Save.
If no settings are saved in Active service settings, the settings are
saved under the first free connection set and are also activated.
If there are settings saved in Active service settings, Activate saved
service settings? will be displayed. To activate the saved settings,
press Yes, or to save them only, press No.
• To view the received settings first, press Options and select View. To
save the settings, press Save.
• To discard the received settings, press Options and select Discard.
Keying in the service settings manually
1. Press Menu, and select Services, Settings and Connection settings.
2. Select Active service settings.
3. Scroll to the connection set you would like to activate and press
Activate.
You need to activate the connection set where you want to save the
service settings. A connection set is a collection of settings required
to make a connection to a service.
4. Select Edit active service settings.
Select each of the settings one by one and key in all the required
settings according to the information you have received from your
network operator or service provider. Note that all the bearer-related
settings are in the Bearer settings menu.
85
Menu functions
Making a connection to a service
1. Firstly, make sure that the service settings of the service you want to
use are activated. To activate the settings:
• Press Menu, and select Services, Settings and Connection
settings. Select Active service settings and scroll to the
connection set you want to activate and press Activate.
2. Secondly, make a connection to the service. There are three ways to
connect:
• Open the start page, for example, the homepage of the service
provider:
Press Menu, and select Services and Home, or in standby mode
press and hold
• Select a bookmark of the service:
Press Menu, and select Services, Bookmarks, and select a
bookmark.
If the bookmark does not work with the current active service
settings, activate another set of service settings and try again.
• Key in the address of the service:
Press Menu, and select Services and then Go to address. Key in
the address of the service and press OK.
Note that it is not necessary to add the prefix http:// in front of
the address since it will be added automatically.
Browsing the pages of a service
After you have made a connection to the service, you can start browsing
its pages. The function of the phone keys may vary in different services.
Follow the text guides on the phone display. For more information,
contact your service provider.
Note that if GPRS is selected as the data bearer, the indicator
is
shown on the top left of the display during browsing. If you receive a call
or a text message, or make a call during a GPRS connection, the
indicator
will be shown on the top right of the display to indicate
86
Menu functions
that the GPRS connection is suspended (on hold). After the call, for
example, the phone tries to reconnect the GPRS connection.
Using the phone keys while browsing
• Use any of the scroll keys to browse through the page.
• To select a highlighted item, press
• To enter letters and numbers, press the keys
enter special characters, press the key
and to
Options while browsing
Press Options and the following options may be available. The service
provider may also offer other options. Select
• Home to return to the homepage.
• Add bookmark to save the page as a bookmark.
• Bookmarks. See Bookmarks on page 88.
• Download links to show the list of bookmarks for downloading.
• Shortcuts to open a new list of options that are, for example, specific
to the page.
• Other options to show a list of other options, for example, options for
wallet and some security options.
• Reload to reload and update the current page.
• Quit. See Disconnect from a service on page 87.
Direct calling
The multi-mode browser supports functions that you can access while
browsing. You can make a voice call, send DTMF tones while a voice call
is in progress, and save in contacts a name and a phone number from a
page.
Disconnect from a service
To quit browsing and to end the connection, press Options and select
Quit. When Quit browsing? is shown, press Yes.
Alternatively, press
. If GSM data is the selected data bearer, press
twice. The phone ends the connection to the service.
87
Menu functions
Appearance settings of the multi-mode browser
1. While browsing, press Options and select Other options and Appear.
settings,
or in standby mode, press Menu, and select Services, Settings and
Appearance settings.
2. Select Text wrapping. Select On and the text continues on the next
line if it cannot be shown on one line. If you select Off, the text is
abbreviated if it is too long to be shown on one line.
Select Show images. Select No and any pictures appearing on the
page are not shown. This can speed up the browsing of pages that
contain a lot of pictures.
Cookies
A cookie is data that a site saves in your phone’s browser cache memory.
The data can be, for example, your user information or your browsing
preferences. Cookies will be saved until you clear the cache memory, see
The cache memory on page 90.
1. While browsing, press Options and select Other options, Security and
Cookies,
or in standby mode, press Menu, and select Services, Settings,
Security settings and Cookies.
2. Select Allow or Reject to allow or prevent the phone receiving
cookies.
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed is
stored in the cache. To empty the cache, see The cache memory on page 90.
Bookmarks
You can save page addresses as bookmarks in the phone’s memory.
1. While browsing, press Options and select Bookmarks,
or in standby mode, press Menu, and select Services and Bookmarks.
2. Scroll to the bookmark you want to use and press Options.
88
Menu functions
3. Select Go to to make a connection to the page associated with the
bookmark. You can also view the title and the address of the
selected bookmark, edit or delete the selected bookmark, or send it
directly to another phone as a bookmark, or as an OTA message, or
create a new bookmark.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
Receiving a bookmark
When you have received a bookmark (sent as a bookmark) 1 bookmark
received is displayed. Press View, then press Options and select View to
view the bookmark, Save to save the bookmark, or Discard to discard it.
Downloading
1. To download more tones, images, games or applications to your
phone, press Menu, and select Services and Download links.
2. Select Tone downloads, Image downloads, Game downloads or App.
downloads to download tones, images, games or applications,
respectively.
Important: Only install applications from sources that offer adequate
protection against harmful software.
Service inbox
The phone is able to receive service messages (pushed messages) sent by
your service provider. Service messages are notifications of, for example,
news headlines, and they may contain a text message or an address of a
service.
To access the Service inbox in standby mode, when you have received a
service message, press Show.
• If you press Exit the message is moved to the Service inbox. To
access the Service inbox later, press Menu, and select Services,
Settings and Service inbox.
To access the Service inbox while browsing, press Options and select
Other options andService inbox. Scroll to the message you want, press
89
Menu functions
Options. Select Retrieve to activate the multi-mode browser and
download the marked content, or Details to display detailed information
on the service notification, or select Delete to delete it.
Service inbox settings
Press Menu, and select Services, Settings and Service inbox settings.
• Select Service messages and On (or Off) to set the phone to receive
(or not to receive) service message.
• Select Automatic connection. If you have set the phone to receive
service messages and select Automatic connection on, the phone will
automatically activate the browser when the phone has received a
service message.
If you select Automatic connection off, the phone will activate the
browser only after you have selected Retrieve when the phone has
received a service message.
The cache memory
The information or services you have accessed are stored in the cache of
your phone. A cache is a buffer memory, which is used to store data
temporarily. To empty the cache:
• while browsing, press Options and select Other options and Clear the
cache, or
• in standby mode, press Menu, and select Services, and Clear the
cache.
Browser security
Security features may be required for some services, such as banking
services or shopping on a site. For such connections you need security
certificates and possibly a security module which may be available on
your SIM card. For more information, contact your service provider.
Security module
The security module can contain certificates as well as private and
public keys. The security module may improve the security services for
applications requiring browser connection, and allows you to use a
90
Menu functions
digital signature. The certificates are saved in the security module by the
service provider.
Press Menu and select Services, Settings, Security settings and Security
module settings. Select
• Security module details to show the security module title, its status,
manufacturer and serial number.
• Module PIN request to set the phone to ask for the module PIN when
using services provided by security module. Key in the code and
select On. To disable the module PIN request, select Off.
• Change module PIN to change the module PIN, if allowed by the
security module. Enter the current module PIN code, then enter the
new code twice.
• Change signing PIN. Select the signing PIN you want to change. Enter
the current PIN code, then enter the new code twice.
See also General information on page 8.
Certificates
There are three kinds of certificates: server certificates, authority
certificates and user certificates.
• The phone uses a server certificate to improve security in connection
between the phone and the gateway. The phone receives the server
certificate from the service provider before the connection is
established and its validity is checked using the authority certificates
saved in the phone. Server certificates are not saved.
The security indicator is displayed during a connection, if the data
transmission between the phone and the gateway (identified by the
IP address in the Edit active service settings - Bearer settings) is
encrypted.
• Authority certificates are used by some services, such as banking
services, for checking the validity of other certificates. Authority
certificates can either be saved in the security module by the service
provider, or they can be downloaded from the network, if the service
supports the use of authority certificates.
91
Menu functions
• User certificates are issued to users by a Certifying Authority. User
certificates are required, for example, to make a digital signature and
they associate the user with a specific private key in a security
module.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Important: Note that even if the use of certificates makes the risks
involved in remote connections and software installation considerably
smaller, they must be used correctly in order to benefit from increased
security. The existence of a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown even if the certificate
should be valid, check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you really trust
the owner of the certificate and that the certificate really belongs to the listed
owner.
Digital signature
You can make digital signatures with your phone. This feature requires
support from your SIM card. The signature can be traced back to you via
the private key on the security module and the user certificate that was
used to perform the signature. Using the digital signature can be the
same as signing your name to a paper bill, contract or other document.
To make a digital signature, select a link on a page, for example, the title
of the book you want to buy and its price. The text to sign (possibly
including amount, date, etc.) will be shown.
Check that the header text is Read and that the digital signature icon
is shown.
Note: If the digital signature icon does not appear, there is a
security breach, and you should not enter any personal data
such as your signing PIN.
To sign the text, read all of the text first and then you can select Sign.
92
Menu functions
Note: The text may not fit within a single screen. Therefore,
make sure to scroll through and read all of the text before
signing.
Select the user certificate you want to use. Key in the signing PIN (see
General information on page 8) and press OK. The digital signature icon
will disappear, and the service may display a confirmation of your
purchase.
■ Go to (Menu 15)
To access some specific functions quickly, press Menu
and selectGo to and select the desired function from
the list.
If there are no functions on the list, press Add, scroll to the function that
you want to add to the list and press Mark.
To remove or add more functions on the list, see Personal shortcuts on
page 54.
■ SIM services (Menu 16)
In addition to the functions available on the phone,
your SIM card may provide additional services that
you can access in Menu 16. Menu 16 is shown only if it is supported by
your SIM card. The name and contents of the menu depend entirely on
the service available.
You can set the phone to show you the confirmation messages sent
between your phone and the network when you are using the SIM
services by selecting the option Yes within the menu Confirm SIM
service actions in Phone settings.
Note that accessing these services may involve sending a text message
(SMS) or making a phone call for which you may be charged.
93
PC Connectivity
7. PC Connectivity
You can send and receive e-mails, and access the Internet when your
phone is connected to a compatible PC via an IR connection or a data
cable. You can use your phone with a variety of PC connectivity and data
communications applications. With PC Suite you can, for example, send
text messages, synchronise contacts, calendar and to-do notes between
your phone and the compatible PC
You may find more information and downloadable files on the Nokia
website, http://www.nokia.com/pcsuite.
■ PC Suite
The PC Suite contains the following applications:
• Nokia Application Installer to install Java applications from the
compatible PC to the phone.
• Nokia Image Converter to make images in supported formats usable
for multimedia messages or wallpaper and to transfer them to your
phone.
• Nokia Sound Converter to optimise MIDI sounds to be compatible
with your phone and to transfer them to your phone.
• Nokia Content Copier to back up and restore personal data between
your phone and PC. You can also transfer content between multiple
Nokia phones.
• Nokia Phone Editor to send text messages and to edit the contacts
and message settings of your phone.
• Nokia Phone Browser to view the contents of the Gallery folder of
your phone on a compatible PC. You can browse picture and audio
files and also modify files in the phone’s memory and transfer files
between the phone and the PC.
• Nokia PC Sync to synchronise contacts, calendar and to-do notes
between your phone and a compatible PC.
94
PC Connectivity
• Nokia Multimedia Player plays the multimedia messages you
receive via e-mail and audio, image, and video files. You can also
create playlists of your favourite multimedia files.
• Nokia 6610i data modem drivers enable you to use your phone as a
modem.
• Nokia Modem Options contains settings for HSCSD and GPRS
connections.
• Nokia Connection Manager to select the connection type between
the PC and the phone.
Copyright protections may prevent some images, ringing tones and
other content from being copied, modified, transferred or forwarded.
GPRS, HSCSD and CSD
With your phone you can use GPRS (General Packet Radio Service),
HSCSD (High Speed Circuit Switched Data) and CSD (Circuit Switched
Data, GSM data) data services.
For availability and subscription to data services, contact your network
operator or service provider.
Note that the use of the HSCSD service consumes the phone’s battery
faster than normal voice or data calls. You may need to connect the
phone to a charger for the duration of data transfer.
See GPRS modem settings on page 83.
■ Using data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Note that making or answering phone calls during a computer
connection is not recommended as it might disrupt the operation.
For better performance during data calls, place the phone on a
stationary surface with the keypad facing downward. Do not move the
phone or hold it in your hand during a data call.
95
Battery information
8. Battery information
■ Charging and Discharging
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, buy a new battery. Use only Nokia approved batteries, and recharge
your battery only with Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave the battery connected to a charger. Overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to charge.
To prolong battery life of NiMh batteries, discharge the battery from time to time
by leaving your device switched on until it turns itself off. Do not attempt to
discharge the battery by any other means.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire! Dispose of batteries according to local
regulations. Please recycle when possible. Do not dispose as household waste.
96
Technical Information
9. Technical Information
Weight....................................87 grams (3,07 ounces) with BLD-5 battery
Battery....................................850 mAh Li-Ion Battery
Networks................................Wireless networks GSM 900, 1800 and1900
Size (volume)........................4.39 cubic inches (72 cc)
Frequency range (Rx)
..................................................EGSM 900: 925 - 960 MHz
..................................................GSM 900: 935 - 960 MHz
..................................................GSM1800: 1805 - 1880 MHz
..................................................GSM1900: 1930 - 1990 MHz
Frequency range (Tx)
..................................................EGSM 900: 880 - 915 MHz
..................................................GSM 900: 890 - 915 MHz
..................................................GSM 1800: 1710 - 1785 MHz
..................................................GSM1900: 1850 - 1910 MHz
Tx output power..................2 W (max)
Battery voltage ....................3.7 V DC
Number of channels...........299
97
CARE AND MAINTENANCE
CARE AND MAINTENANCE
Your phone is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you to fulfil any warranty
obligations and to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small
children.
• Keep the phone dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits.
• Do not use or store the phone in dusty, dirty areas. Its moving parts can be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When it warms up (to its normal
temperature), moisture can form inside, which may damage electronic circuit
boards.
• Do not attempt to open the phone. Nonexpert handling may damage it.
• Do not drop, knock or shake the phone. Rough handling can break internal
circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the phone.
• Do not paint the phone. Paint can clog the moving parts and prevent proper
operation.
• Use only the supplied or an approved replacement antenna. Unauthorised
antennas, modifications or attachments could damage the phone and may
violate regulations governing radio devices.
All of the above suggestions apply equally to your phone, battery, charger or any
accessory. If any of them is not working properly, take it to your nearest qualified
service facility. The personnel there will assist you and, if necessary, arrange for
service.
98
IMPORTANT SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
■ Traffic safety
Do not use a handheld telephone while driving a vehicle. Always secure
the phone in its holder; do not place the phone on the passenger seat or
where it can break loose in a collision or sudden stop.
Remember road safety always comes first!
■ Operating environment
Remember to follow any special regulations and always switch off your
phone wherever forbidden, or when it may cause interference or danger.
Use the phone only in its normal operating positions.
When connecting the phone or accessory to another device, read its
user’s guide for safety instructions. Don’t connect incompatible
products. As with other mobile radio transmitting equipment, users are
advised to operate this equipment only in the normal operating position
(held to your ear with the antenna pointing over your shoulder).
■ Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend a distance of 6 inches (20 cm) be
maintained between a handheld wireless phone and a pacemaker to
avoid interference with the pacemaker. These recommendations are
consistent with independent research and recommendations of Wireless
Technology Research.
PERSONS WITH A PACEMAKER:
• Should always keep the phone more than 20 cm (6 inches) from their
pacemaker when the phone is switched on.
• Should not carry the phone in a breast pocket.
99
IMPORTANT SAFETY INFORMATION
• Should use the ear opposite the pacemaker to minimize the potential
for interference.
• If you have any reason to suspect that interference is taking place,
switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with hearing aids. In the
event of such interference, consult your wireless provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular
phones, may interfere with the functionality of inadequately protected
medical devices. Consult a physician or the manufacturer of the medical
device to determine if they are adequately shielded from external RF
energy or if you have any questions.
Switch off your phone in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external RF
energy.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (for example, electronic fuel
injection systems, electronic antiskid/antilock braking systems,
electronic speed control systems, air bag systems). Check with the
manufacturer or its representative regarding your vehicle. You should
also consult the manufacturer of any equipment that has been added to
your vehicle.
■ Posted facilities
Switch your phone off in any facility where posted notices so require.
■ Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone when at a refueling point
100
IMPORTANT SAFETY INFORMATION
(service station). Users are reminded of the need to observe restrictions
on the use of radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants, or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats; chemical transfer or
storage facilities; vehicles using liquefied petroleum gas (such as
propane or butane); areas where the air contains chemicals or particles,
such as grain, dust, or metal powders; and any other area where you
would normally be advised to turn off your vehicle engine.
■ Vehicles
Only qualified personnel should service the phone or install the phone in
a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials in
the same compartment as the phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or
portable wireless equipment in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
■ Aircraft
FCC regulations prohibit using your phone while in the air.Switch off
your phone before boarding an aircraft. The use of wireless telephones
in an aircraft may be dangerous to the operation of the aircraft, disrupt
the wireless telephone network, and may be illegal.
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, legal action, or both.
101
IMPORTANT SAFETY INFORMATION
■ Emergency calls
Important: This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed
functions. Because of this, connections in all conditions cannot be
guaranteed. Therefore you should never rely solely upon any wireless
phone for essential communications (for example, medical
emergencies).
Emergency calls may not be possible on all wireless phone networks or
when certain network services and/or phone features are in use. Check
with local service providers.
MAKING AN EMERGENCY CALL
Note: Some networks may require that a valid SIM card be properly
inserted in the phone. Official emergency numbers vary by location (for
example, 911 or other official emergency number).
•1. If the phone is not on, switch it on. Check for adequate signal
strength.
2. Press
as many times as needed (for example, to exit a call, to
exit a menu, etc.) to clear the display and ready the phone for calls.
3. Enter the emergency number for your present location (for example,
911 or other official emergency number). Emergency numbers vary
by location.
4. Press the
key.
If certain features are in use, you may first need to turn those features
off before you can make an emergency call. Consult this user guide and
your local cellular service provider.
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless
phone may be the only means of communication at the scene of an
accident - do not end the call until given permission to do so.
102
IMPORTANT SAFETY INFORMATION
■ CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to
reach the network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model.
The highest SAR value for this model phone as reported to the FCC when
tested for use at the ear is 0.97W/kg and when worn on the body, as
described in this user guide, is 1.05W/kg. (Body-worn measurements
differ among phone models, depending upon available accessories and
FCC requirements).
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
103
IMPORTANT SAFETY INFORMATION
requirement. The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid after searching on FCC ID
LJPRM-37
For body-worn operation, this phone has been tested and meets the FCC
RF exposure guidelines for use with a carry case, belt clip or holder that
contains no metal and that positions the handset a minimum of
7/8 inch (2.2 cm) from the body. Use of other carry cases, belt clips or
holders may not ensure compliance with the FCC RF exposure
guidelines. If you do not use a body-worn enhancement and are not
holding the phone at the ear, position the handset a minimum of
7/8 inch (2.2 cm) from your body when the phone is switched on.
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other
regions please look under product information at www.nokia.com.
104
APPENDIX
APPENDIX
■ A message from the CTIA
© 2001 Cellular Telecommunications & Internet Association. All Rights
Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC
20036. Phone: (202) 785-0081
Safety is the most important call you will ever make.
A Guide to Safe and Responsible Wireless Phone Use
Tens of millions of people in the U.S. today take advantage of the unique
combination of convenience, safety and value delivered by the wireless
telephone. Quite simply, the wireless phone gives people the powerful
ability to communicate by voice--almost anywhere, anytime--with the
boss, with a client, with the kids, with emergency personnel or even with
the police. Each year, Americans make billions of calls from their
wireless phones, and the numbers are rapidly growing.
But an important responsibility accompanies those benefits, one that
every wireless phone user must uphold. When driving a car, driving is
your first responsibility. A wireless phone can be an invaluable tool, but
good judgment must be exercised at all times while driving a motor
vehicle--whether on the phone or not.
The basic lessons are ones we all learned as teenagers. Driving requires
alertness, caution and courtesy. It requires a heavy dose of basic
common sense---keep your head up, keep your eyes on the road, check
your mirrors frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the speed limit. It
means using seatbelts and requiring other passengers to do the same.
But with wireless phone use, driving safely means a little more. This
brochure is a call to wireless phone users everywhere to make safety
their first priority when behind the wheel of a car. Wireless
telecommunications is keeping us in touch, simplifying our lives,
protecting us in emergencies and providing opportunities to help others
in need.
When it comes to the use of wireless phones, safety is your most
important call.
105
APPENDIX
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a wireless phone
which should be easy to remember.
1. Get to know your wireless phone and its features such as speed dial
and redial. Carefully read your instruction manual and learn to take
advantage of valuable features most phones offer, including
automatic redial and memory. Also, work to memorize the phone
keypad so you can use the speed dial function without taking your
attention off the road.
2. When available, use a hands free device. A number of hands free
wireless phone accessories are readily available today. Whether you
choose an installed mounted device for your wireless phone or a
speaker phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make sure you place
your wireless phone within easy reach and where you can grab it
without removing your eyes from the road. If you get an incoming
call at an inconvenient time, if possible, let your voice mail answer it
for you.
4. Suspend conversations during hazardous driving conditions or
situations. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow and ice can be hazardous, but
so is heavy traffic. As a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are
reading an address book or business card, or writing a “to do” list
while driving a car, you are not watching where you are going. It’s
common sense. Don’t get caught in a dangerous situation because
you are reading or writing and not paying attention to the road or
nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you
are not moving or before pulling into traffic. Try to plan your calls
before you begin your trip or attempt to coincide your calls with
times you may be stopped at a stop sign, red light or otherwise
106
APPENDIX
stationary. But if you need to dial while driving, follow this simple
tip--dial only a few numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Stressful or emotional conversations and driving do not
mix--they are distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with aware you are
driving and if necessary, suspend conversations which have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless phone is one
of the greatest tools you can own to protect yourself and your
family in dangerous situations--with your phone at your side, help
is only three numbers away. Dial 9-1-1 or other local emergency
number in the case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your
wireless phone provides you a perfect opportunity to be a “Good
Samaritan” in your community. If you see an auto accident, crime in
progress or other serious emergency where lives are in danger, call
9-1-1 or other local emergency number, as you would want others
to do for you.
10. Call roadside assistance or a special wireless non-emergency
assistance number when necessary. Certain situations you
encounter while driving may require attention, but are not urgent
enough to merit a call for emergency services. But you still can use
your wireless phone to lend a hand. If you see a broken-down
vehicle posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a vehicle you know
to be stolen, call roadside assistance or other special nonemergency wireless number.
Careless, distracted individuals and people driving irresponsibly
represent a hazard to everyone on the road. Since 1984, the Cellular
Telecommunications Industry Association and the wireless industry
have conducted educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As we approach a
new century, more and more of us will take advantage of the benefits of
107
APPENDIX
wireless telephones. And, as we take to the roads, we all have a
responsibility to drive safely.
The wireless industry reminds you to use your phone safely when driving.
For more information, please call 1-888-901-SAFE.
For updates: http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85
■ A message from the U.S. Food and Drug
Administration to all users of mobile phones
© July 18, 2001 For updates: http://www.fda.gov/cdrh/phones.
Consumer Update on Wireless Phones
U.S. Food and Drug Administration
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no proof,
however, that wireless phones are absolutely safe. Wireless phones emit
low levels of radiofrequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in the stand-by
mode. Whereas high levels of RF can produce health effects (by heating
tissue), exposure to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have
suggested that some biological effects may occur, but such findings
have not been confirmed by additional research. In some cases, other
researchers have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is FDA’s role concerning the safety of wireless phones?
Under the law, FDA does not review the safety of radiation-emitting
consumer products such as wireless phones before they can be sold, as it
does with new drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to emit
radiofrequency energy (RF) at a level that is hazardous to the user. In
such a case, FDA could require the manufacturers of wireless phones to
108
APPENDIX
notify users of the health hazard and to repair, replace or recall the
phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a number of
steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies
that have responsibility for different aspects of RF safety to ensure
coordinated efforts at the federal level. The following agencies belong
to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with the
Federal Communications Commission (FCC). All phones that are sold in
the United States must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks
rely upon. While these base stations operate at higher power than do
the wireless phones themselves, the RF exposures that people get from
these base stations are typically thousands of times lower than those
they can get from wireless phones. Base stations are thus not the
subject of the safety questions discussed in this document.
109
APPENDIX
3. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with
built-in antennas, often called cell mobile or PCS phones. These types of
wireless phones can expose the user to measurable radiofrequency
energy (RF) because of the short distance between the phone and the
user’s head. These RF exposures are limited by Federal Communications
Commission safety guidelines that were developed with the advice of
FDA and other federal health and safety agencies. When the phone is
located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called cordless phones;
which have a base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus produce RF
exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many
studies have suffered from flaws in their research methods. Animal
experiments investigating the effects of radiofrequency energy (RF)
exposures characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories. A few animal
studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the
studies that showed increased tumor development used animals that
had been genetically engineered or treated with cancer-causing
chemicals so as to be pre-disposed to develop cancer in the absence of
RF exposure. Other studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the conditions under which
people use wireless phones, so we don’t know with certainty what the
results of such studies mean for human health.
Three large epidemiology studies have been published since December
2000. Between them, the studies investigated any possible association
between the use of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain or salivary gland,
leukemia, or other cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless phone RF
exposures. However, none of the studies can answer questions about
110
APPENDIX
long-term exposures, since the average period of phone use in these
studies was around three years.
5. What research is needed to decide whether RF exposure from
wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of
people actually using wireless phones would provide some of the data
that are needed. Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals would be needed to
provide reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly applicable to
human populations, but 10 or more years follow-up may be needed to
provide answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is hampered by
difficulties in measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement, such as the
angle at which the phone is held, or which model of phone is used.
6. What is FDA doing to find out more about the possible health
effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with
groups of investigators around the world to ensure that high priority
animal studies are conducted to address important questions about the
effects of exposure to radiofrequency energy (RF).
FDA has been a leading participant in the World Health Organization
International Electromagnetic Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a
detailed agenda of research needs that has driven the establishment of
new research programs around the world. The Project has also helped
develop a series of public information documents on EMF issues.
FDA and the Cellular Telecommunications & Internet Association (CTIA)
have a formal Cooperative Research and Development Agreement
(CRADA) to do research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in government,
industry, and academic organizations. CTIAfunded research is
conducted through contracts to independent investigators. The initial
111
APPENDIX
research will include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad assessment of
additional research needs in the context of the latest research
developments around the world.
7. How can I find out how much radiofrequency energy exposure I
can get by using my wireless phone?
All phones sold in the United States must comply with Federal
Communications Commission (FCC) guidelines that limit radiofrequency
energy (RF) exposures. FCC established these guidelines in consultation
with FDA and the other federal health and safety agencies. The FCC limit
for RF exposure from wireless telephones is set at a Specific Absorption
Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is
consistent with the safety standards developed by the Institute of
Electrical and Electronic Engineering (IEEE) and the National Council on
Radiation Protection and Measurement. The exposure limit takes into
consideration the body’s ability to remove heat from the tissues that
absorb energy from the wireless phone and is set well below levels
known to have effects. Manufacturers of wireless phones must report
the RF exposure level for each model of phone to the FCC. The FCC
website (http://www.fcc.gov/oet/rfsafety) gives directions for locating
the FCC identification number on your phone so you can find your
phone’s RF exposure level in the online listing.
8. What has FDA done to measure the radiofrequency energy coming
from wireless phones?
The Institute of Electrical and Electronic Engineers (IEEE) is developing a
technical standard for measuring the radiofrequency energy (RF)
exposure from wireless phones and other wireless handsets with the
participation and leadership of FDA scientists and engineers. The
standard, Recommended Practice for Determining the Spatial-Peak
Specific Absorption Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental Techniques, sets forth the first
consistent test methodology for measuring the rate at which RF is
deposited in the heads of wireless phone users. The test method uses a
tissue-simulating model of the human
head. Standardized SAR test methodology is expected to greatly
improve the consistency of measurements made at different
112
APPENDIX
laboratories on the same phone. SAR is the measurement of the amount
of energy absorbed in tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g) of matter. This
measurement is used to determine whether a wireless phone complies
with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency
energy from my wireless phone?
If there is a risk from these products--and at this point we do not know
that there is--it is probably very small. But if you are concerned about
avoiding even potential risks, you can take a few simple steps to
minimize your exposure to radiofrequency energy (RF). Since time is a
key factor in how much exposure a person receives, reducing the
amount of time spent using a wireless phone will reduce RF exposure.
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source of
the RF, since the exposure level drops off dramatically with distance. For
example, you could use a headset and carry the wireless phone away
from your body or use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are
harmful. But if you are concerned about the RF exposure from these
products, you can use measures like those described above to reduce
your RF exposure from wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless
phones, including children and teenagers. If you want to take steps to
lower exposure to radiofrequency energy (RF), the measures described
above would apply to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF exposure.Some
groups sponsored by other national governments have advised that
children be discouraged from using wireless phones at all. For example,
the government in the United Kingdom distributed leaflets containing
such a recommendation in December 2000. They noted that no evidence
exists that using a wireless phone causes brain tumors or other ill
effects. Their recommendation to limit wireless phone use by children
113
APPENDIX
was strictly precautionary; it was not based on scientific evidence that
any health hazard exists.
11. What about wireless phone interference with medical
equipment?
Radiofrequency energy (RF) from wireless phones can interact with
some electronic devices. For this reason, FDA helped develop a detailed
test method to measure electromagnetic interference (EMI) of
implanted cardiac pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard sponsored by the
Association for the Advancement of Medical instrumentation (AAMI).
The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are
safe from wireless phone EMI. FDA has tested hearing aids for
interference from handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless phones so that
no interference occurs when a person uses a compatible phone and a
accompanied hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful interference be
found to occur, FDA will conduct testing to assess the interference and
work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
•
FDA web page on wireless phones
http://www.fda.gov/cdrh/phones/index.html
•
Federal Communications Commission (FCC) RF Safety Program
http://www.fcc.gov/oet/rfsafety
•
International Commission on Non-Ionizing Radiation Protection
http://www.icnirp.de
114
APPENDIX
•
World Health Organization (WHO) International EMF Project
http://www.who.int/emf
•
National Radiological Protection Board (UK)
http://www.nrpb.org.uk/
July 18, 2001
For updates: http://www.fda.gov/cdrh/phones
115

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:03:26 10:21:45Z
Modify Date                     : 2004:03:26 11:33:59+01:00
Creator                         : FrameMaker+SGML 5.5.6p145
Page Count                      : 117
Creation Date                   : 2004:03:26 10:21:45Z
Mod Date                        : 2004:03:26 11:33:59+01:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2004:03:26 11:33:59+01:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools

Microsoft RM-37 GSM 900/1800/1900 Cellular Telephone User Manual Manual

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone Manual

Manual

FCC ID Filing: LJPRM-37

Navigation menu

Namespaces

Views

Navigation