Microsoft RM-376 CDMA Cellphone User Manual N2608 EN RUIM silver 06132008 FCC
Microsoft Mobile Oy CDMA Cellphone N2608 EN RUIM silver 06132008 FCC
Manual
1
RM-376 User Guide
Draft
2
Copyright ©2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Navi, and the Nokia Original
Enhancements logos are trademarks or registered trademarks of Nokia
Corporation. Nokia tune is a sound mark of Nokia Corporation. Other
product and company names mentioned herein may be trademarks or
tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the
contents in this document in any form without the prior written
permission of Nokia is prohibited.
Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes and improvements to any of the products described in
this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE
RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER
CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS”. EXCEPT AS
REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE
THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
Export controls
This device may contain commodities, technology or software subject to
export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
Draft
3
FCC NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC can require
you to stop using your telephone if such interference cannot be eliminated.
If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's
authority to operate this equipment.
The third-party applications provided with your device may have been
created and may be owned by persons or entities not affiliated with or
related to Nokia. Nokia does not own the copyrights or intellectual
property rights to the third-party applications. As such, Nokia does not
take any responsibility for end-user support, functionality of the
applications, or the information in the applications or these materials.
Nokia does not provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE
APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA
NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR
THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS,
COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
xxxxxxx/Issue 1
Draft
4
Contents
1. Device at a glance ............................................................. 11
2. Set up your device............................................................. 20
3. Write text........................................................................... 29
4. Messaging .......................................................................... 32
5. Contacts ............................................................................. 40
6. Log...................................................................................... 46
7. Settings .............................................................................. 47
8. Gallery ................................................................................ 54
9. Media ................................................................................. 55
10.Organiser........................................................................... 58
11.Extras ................................................................................ 64
12.Enhancements................................................................... 66
13.Battery and charger information .................................... 67
Draft
5
Safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for further
information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use
is prohibited or when it may cause interference or
danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to
operate the vehicle while driving. Your first
consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in
aircraft, near medical equipment, fuel, chemicals, or
blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this
product.
Draft
6
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do
not connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
Draft
7
Welcome
Congratulations on your purchase of the RM-376 mobile
device. It provides many functions for practical daily use,
such as a hands-free loudspeaker, an alarm clock, a
calculator, a calendar, and more. Your device can connect
to a PC, laptop, or other device using a data cable. To
personalise it, you can set your favourite ringing tones,
wallpaper, screensaver, and other features.
■About your device
The wireless device described in this guide is approved for
use on the CDMA 800 MHz and CDMA 2000 1xRTT network.
Contact your service provider for more information about
networks.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
When connecting to any other device, read its user guide
for detailed safety instructions. Do not connect
incompatible products.
Draft
8
■Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on all
networks; other networks may require that you make
specific arrangements with your service provider before
you can use the network services. Your service provider
can give you instructions and explain what charges will
apply. Some networks may have limitations that affect
how you can use network services. For instance, some
networks may not support all language-dependent
characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this device,
such as media and browser messages require network
support for these technologies.
Draft
9
■Getting help
If you need help, contact the Nokia Care contact centre.
Before calling, write down the mobile equipment
identifier (MEID) and your zip code (only in the US), and
have them available.
Find your device label
The MEID is found on the type
label, which is located under
the battery on the back of the
device. See "Remove the back
cover and battery", page 21.
Accessibility solutions
Nokia is committed to making mobile devices easy to use
for all individuals, including those with disabilities. For
more information, see www.nokiaaccessibility.com.
Draft
10
Nokia support on the web
Check www.nokia.com/support or your local Nokia
website for the latest guides, additional information,
downloads, and services related to your Nokia product.
Draft
11
1. Device at a glance
1. Earpiece
2. Display screen
3. Centre selection key
4. Right selection key
5. End/Power key
6. Keypad
7. Silent key
8. Wireless internet key
9. Radio key
10.Call key
11.Left selection key
12.Navi™ key (hereafter
referred to as scroll
key)
Draft
12
13.Flashlight
14.Flashlight key
15.Loudspeaker
16.Headphone jack
17.Charging port
18.Wrist strap eyelet
19.Microphone
Draft
13
■Standby mode
Depending on your wireless service provider and the
model number of your device, some or all of the following
indicators, icons, and shortcut keys may be available in
the standby mode.
Standby screen
The start screen indicates that your
device is in the standby mode.
1. Signal strength — The strength of
the signal received by the device is
indicated by the number of bars
displayed.
2. Battery strength — Four bars
indicate a fully charged battery.
3. Time — The time of day is
displayed.
4. Names — Press the right selection
key to select this option.
5. Menu — Press the centre selection
key to select this option.
Draft
14
6. Go to — Press the left selection key to select this
option.
Go to provides a list of your favourite applications and
functions for quick and easy access. The first time you
select Go to, no applications or functions are displayed. To
add items to the list, select Add and from the available
options.
Active standby
The active standby mode displays a list of selected device
features and information that you can directly access,
such as application shortcuts, information from the radio,
calendar events, and a customisable note. To turn active
standby mode on or off and to configure settings, select
Menu > Settings > Display > Active standby and from the
available options.
When active standby is idle, you can only view content. To
activate the navigation mode and access content, scroll
down. To exit the navigation mode, select Exit. If no keys
are pressed in a certain time, the phone automatically
returns to the idle mode.
Draft
15
Content items in the navigation mode
The following default items may be available in the
navigation mode:
Audio Applications — Switch on the radio. To change the
station, scroll left or right. To search for radio stations,
scroll and hold left or right.
Calendar — View today’s notes. To view notes for other
days, scroll left or right.
Countdown Timer — Set the normal or interval timer.
Indicators — View the date and day of the week.
My Note — To enter a personalised note, select Edit.
Shortcut Bar — To select a shortcut, scroll left or right. To
select and organise shortcuts when in the navigation
mode, select Options.
Draft
16
Indicators and icons
An alarm is set. See "Alarm clock", page 58.
A headset is connected to the device. See
"Enhancement settings", page 51.
Your device keypad is locked. See "Keyguard", page
27.
The loudspeaker is on.
Your phone is set to the silent profile. See
"Profiles", page 47.
The stopwatch timer is running in the background.
You have new text messages. See "Text messages",
page 32.
You have new voice messages. See "Voice
messages", page 37. This icon shows only when the
network supports this function.
You have missed a call. See "Log", page 46.
The countdown timer is running.
The current profile is timed. See "Profiles", page 47.
Draft
17
Shortcut keys
The following shortcut keys may be available in the
standby mode.
Scroll up — Go to Names.
Scroll right — Go to Calendar.
Scroll down — You can define this shortcut. See "My
shortcuts", page 50.
Scroll left — Go to the text messages inbox.
■Scroll key
You can use the four-way scroll key to scroll up, down,
left, and right through menus.
1. In the standby mode, select Menu to scroll through the
main menus. As you scroll through the menus, the
menu number is displayed. There is a scroll bar with a
tab that moves up or down as you scroll through the
menus, to represent your current position in the menu
structure.
2. When you arrive at a menu, press the centre selection
key to access the submenus.
Draft
18
•Select Back (the right selection key) to return to the
previous menu.
• Press the end key to return to the standby mode
from any menu or submenu.
■Security code settings
You can use security codes to protect your device and UIM
card from unauthorised access. You can activate the lock
code, PIN code, and PIN2 code. When a security code is set
and turned on, no outgoing calls are allowed and the
menu cannot be accessed without entering the correct
code first.
Lock code — Protects your device from unauthorised
access. The default lock code is 1234.
PIN code — Protects your UIM card from unauthorised
access. The PIN code can be 4 to 8 digits in length. The
default PIN code may vary depending on your wireless
service provider.
PIN2 code — Supplied with some UIM cards, and is
required to access some functions in your device. The PIN2
code can be 4 to 8 digits in length.
Draft
19
After three successive incorrect entries, the PIN code or
PIN2 code is blocked. To unblock it, you must enter your
personal unblocking key (PUK) code or PUK2 code. If you
do not have this, contact your service provider.
You can change the lock code, PIN code, and PIN2 code.
These codes can only include the numbers from 0 to 9. If
you forget any of these codes, contact your service
provider.
To configure security code settings, select Menu >
Settings > Security, enter your default lock code and
select OK, and from the available options.
Draft
20
2. Set up your device
■Antenna
Your device may have internal
and external antennas. As with
any radio transmitting device,
avoid touching the antenna area
unnecessarily while the antenna
is transmitting or receiving.
Contact with such an antenna
affects the communication quality and may cause the
device to operate at a higher power level than otherwise
needed and may reduce the battery life.
■Insert battery and UIM card
Note: Always switch off the power and disconnect
the charger and any other device before removing
the cover. Avoid touching electronic components
while changing the cover. Always store and use the
device with the cover attached.
Draft
21
Remove the back cover and battery
Always switch the device off and disconnect the charger
before removing the battery.
1. With the back of the device
facing you, push down on the
back cover. Slide the cover
towards the hinge, and
remove.
2. Lift the battery up from its
compartment.
Install the UIM (CDMA SIM) card
The User Identity Module (UIM) card, also called the
CDMA Subscriber Identity Module (SIM) card, can be
easily damaged by scratching or bending, so be careful
when handling, inserting, or removing it. The UIM card
Draft
22
slot is located under the battery. Keep all UIM cards out of
the reach of small children.
1. Hold the bevelled corner
of the UIM card facing up
and aligned with the
bevelled corner of the card
holder.
2. Insert the UIM card into
the holder with the gold-
coloured contacts facing
down, matching up with
the gold-coloured
contacts on the device.
Draft
23
Replace the battery and back cover
1. Insert the battery, gold-
coloured contact end first,
into the battery slot.
2. Push down on the other
end of the battery to snap
it into place.
3. Replace the back cover so
that the cover tabs align
with the slots in the
device. Slide the back
cover toward the bottom
of the device until the
cover is securely in place.
Draft
24
Charge the battery
1. Plug the charger transformer into a standard AC outlet.
2. Insert the charger output
plug into the charger slot.
If the battery is completely
discharged, it may take a
few minutes before the
charging indicator appears on the display or before any
calls can be made.
Note: The phone shall only be connected to
products that bear the USB-IF logo or have
completed the USB-IF compliance program.
■Wrist strap
Note: The wrist strap does NOT come in the box.
1. Remove the back cover.
2. Thread the wrist strap, and
tighten it.
3. Replace the cover.
Draft
25
■Turn your device on or off
1. Press and hold the end key for at least 4 seconds.
2. Enter the security code, if necessary, and select OK.
See "Security settings", page 51.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched
on. Do not switch the device on when wireless
phone use may cause interference or danger.
■Connect the headset
A compatible headset may be purchased with your device
or separately as an enhancement. See "Enhancement
settings", page 51.
1. Plug the headset connector into
the connector at the top of your
device. appears in the standby
mode.
2. Position the headset on your ear.
With the headset connected, you
can make, answer, and end calls as
usual.
Draft
26
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not
use the headset where it can endanger your
safety.
■Make and answer calls
Make a call
To make a call, enter the phone number, including the
country code and area code, if necessary. To delete a
character, select Clear. Press the call key to call the
number. Use the scroll key to adjust the volume of the
earpiece or headset during the phone call. To end the call,
press the end key.
Make a conference call
Conference calling (network service) allows you to take
part in a conference call with two other participants.
During a call, to make a call to a new participant, select
Options > New call. Enter the number you want, and
press the call key. When the new call is answered, press
Draft
27
the call key to connect the calls. To end the conference
call, select Options > End all calls, or press the end key.
Answer a call
To answer an incoming call, press the call key. To reject
the call without answering, press the end key. To reject
the call and send the caller a text message, select Send
msg and Send to send the default message (see "Call
settings", page 50), or Options and from the available
options to send a different message.
■Keyguard
With the keyguard, you can lock the keypad to prevent
accidental keypresses. Remember to lock your device
keypad to prevent accidental calls. If the keypad is locked,
it unlocks when you receive a call. After the call, it is
automatically locked again.
To set the keypad to lock automatically after a certain
time delay when the device is in the standby mode and no
function of the device has been used, select Menu >
Settings > Phone > Automatic keyguard > On.
Draft
28
To lock the keypad manually, select Menu, and press *
within 4 seconds.
When the keyguard is on, calls may be possible to the
official emergency number programmed into your device.
To unlock the keypad, select Unlock, and then press *
within 4 seconds.
■Loudspeaker
You can use your device as a loudspeaker during a call.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
To activate the loudspeaker during a call, select Loudsp.,
and close the fold.
To deactivate the loudspeaker during a call, open the fold,
and select Normal.
The loudspeaker is deactivated automatically when a call
(or a call attempt) ends or when certain enhancements are
connected.
Draft
29
3. Write text
■English input
To enter English, you can either use standard or predictive
English input. Predictive English input reduces the number
of keypresses you need to make and increases the writing
speed.
To enter a number when the input language is English,
press and hold the number key until the number appears
on the display. Alternatively, press and hold # to enter
number mode.
Change the case and input mode
To switch between standard English and predictive
English input mode, select Options > Prediction options >
On or Off.
In standard English input mode, press # to switch between
uppercase , lowercase , and sentence case
.
Draft
30
In predictive English input mode, press # to switch
between lowercase and sentence case
.
To switch quickly between input modes, press #
repeatedly.
Standard English input
1. Press a number key (2–9) to enter the first letter on the
key, twice to enter the second letter, and so on.
If the next letter is located on the same key as the
current one, scroll down or up to confirm the previous
letter, or wait until the cursor appears.
2. Press Clear to delete one letter to the left of the cursor.
Press and hold Clear to delete letters quickly.
3. To insert a space, press 0.
Predictive English input
With predictive English input, you can use the built-in
dictionary when writing, and add new words to it. You can
use predictive English input only when the writing
language is English.
Draft
31
1. Start writing a word using the keys 2 to 9. Press each
key once for each letter.
The following example shows what is displayed when
you write "Nokia" using predictive English input. Press
6-6-5-4-2.
2. Press 0 to confirm a word and insert a space after it.
If the word is not correct, press * repeatedly until the
desired word appears, and then confirm.
If the ? character is displayed after the word, the word
you intend to write is not in the dictionary. To add the
word to the dictionary, select Spell. Enter the word
using standard English input, and select Save.
66542
No Onl Noki Nokia
Draft
32
4. Messaging
If you have subscribed to a messaging network service,
you can send and receive messages between compatible
mobile devices that also subscribe to a messaging service.
You can also exchange e-mail. Messaging features are
network services.
When composing text messages, check the number of
characters allowed in the top right corner of the message.
Using Unicode characters takes up more space. With
Unicode characters in your message, the indicator may
not show the message length correctly.
Note: The message sent icon or text on your device
screen does not indicate that the message is
received at the intended destination.
■Text messages
Your device supports text messages beyond the limit for a
single message. Longer messages are sent as two or more
messages. Your service provider may charge accordingly.
Characters with accents or other marks and characters
Draft
33
from some language options take up more space, and limit
the number of characters that can be sent in a single
message.
Compose and send a message
1. In the standby mode, select Menu > Messaging > Text
messages > Create message.
2. In the To: field, enter the recipient’s phone number. To
retrieve a contact number, select Add > Recently used,
Contacts, or Distribution list, and the desired contact.
3. Write a message.
When writing in the Message: field, select from the
following options:
Send — Send the message.
Writing language — Select the writing language.
Prediction options — Select standard or predictive
input mode.
Use template — Insert a predefined template into your
message.
Save as draft — Save the message in the drafts folder.
Draft
34
Save as template — Save the message as one of the
predefined templates in the templates folder.
Sending options — Select the priority of the message,
ask for a delivery report for the message, send a
callback number, or append a signature to the
message.
Exit editor — Return to the text messages menu.
Go to top field or Go to bottom field — Move the cursor
to the top or bottom field.
4. Scroll down, and select Send.
Read a message
When you receive a message, a notification and are
displayed. Select Show to read the message, or Exit to
dismiss the notification and read the message later from
your inbox. If necessary, scroll up or down to view the
whole message.
When reading a text message, select Options to access
some or all of the following options:
Delete — Discard the message.
Draft
35
Use detail — Add the sender to your contacts list, call the
sender, send a message to the sender’s number or e-mail
address, or access a web address in the message.
Save — Move the message to another folder.
Forward — Forward the original message directly or edit
the message and then forward it to another recipient.
Rename — Edit the title of the message.
Lock or Unlock — Protect the message from being erased.
Reply to a message
1. In the standby mode, select Menu > Messaging > Text
messages > Inbox and the desired message, or select
Show when you receive a message.
2. Select Reply and compose your reply using the keypad.
3. Select Send.
Delete messages
If your message memory is full, No space for new text
messages appears in the standby mode. You must delete
old messages to free space for new ones.
Draft
36
Delete a single message
1. In the standby mode, select Menu > Messaging > Text
messages.
2. Select the folder containing the message you want to
delete.
3. Scroll to the message you want to delete, and select
Options > Delete > Yes.
Delete all messages in a folder
1. In the standby mode, select Menu > Messaging > Text
messages > Delete messages.
2. Select All, All read, or All unread to indicate which
messages to delete in a folder.
3. Scroll to each folder that has messages you want to
delete, and select Mark > Done > Yes.
Change message settings
In the standby mode, select Menu > Messaging > Text
messages > Message settings > Other settings and the
setting you want to change.
Draft
37
Save incoming text messages — Select where to save
incoming messages.
Message font size — Select a font size.
Message overwriting — Automatically replace old
messages in the inbox and sent items folders when new
ones arrive.
Save sent messages — Select whether to save sent
messages.
Queue msgs. when digital unavailable — Select whether to
store messages in the outbox until they can be sent with
digital service.
■Voice messages
The voice mailbox is a network service and you may need
to subscribe to it. For more information and for your voice
mailbox number, contact your service provider.
When you receive a voice message, your device beeps,
displays a notification, or both. If you receive more than
one voice message, your device shows the number of voice
messages received.
Draft
38
Save voice mailbox number
1. In the standby mode, select Menu > Messaging >
Voice messages > Voice mailbox number. If a number
has already been saved, it is displayed.
2. If no number has been saved, or if you want to edit the
existing number, enter the number you want, and
select OK.
Listen to voice messages
To dial the voice mailbox number, in the standby mode,
press and hold 1, or select Menu > Messaging > Voice
messages > Listen to voice messages. When you are
connected and the prerecorded greeting begins, follow
the instructions to listen to your voice messages.
View the details of the last voice message
To view the caller number, time, and other information,
select Menu > Messaging > Voice messages > View details
of last voice msg.
Draft
39
Clear voice message icon
To clear the voice message icon from the display, in the
standby mode, select Menu > Messaging > Voice
messages > Clear voice message icon.
■Web messaging
Web messaging is a network service. You can use the
minibrowser to check e-mail messages.
To connect to the minibrowser, in the standby mode,
select Menu > Messaging > Minibrowser Messages >
Connect.
Draft
40
5. Contacts
The contacts list can store up to 300 contacts, with
multiple numbers and text notes for each contact. How
many numbers and text entries you can save may vary,
depending on the length and total number of entries in
the contacts list.
■Names
You can access and add to the list of contacts and caller
groups saved on your device, UIM card, or both.
Search for a contact
Select Menu > Contacts > Names > Options > Search,
enter pinyin or the first letters of the name you are
searching for, scroll to the desired contact, and select
Details.
Draft
41
Add new contacts
To add the first contact, select Menu > Contacts > Names
> Add, enter the name and phone number, and select
Save.
To add subsequent contacts, in the names menu, select
Options > Add new contact, enter the name and phone
number, and select Save.
Edit contacts entries
Select Menu > Contacts > Names, scroll to the entry you
want to edit, and select Details > Options and from the
available options.
Business cards
You can send and receive contacts as business cards via
text messaging. Select Menu > Contacts > Names, scroll
to the desired contact, and select Details > Options >
Send bus. card.
Draft
42
■Contacts settings
To define which memory is used for contact information
and how much memory is available, and how your
contacts are shown, select Menu > Contacts > Settings.
■Groups
To identify callers, you can add contacts to caller groups,
and assign a unique ringing tone or graphic to each group.
Create and edit caller groups
To create the first caller group, select Menu > Contacts >
Groups > Add, enter details for the group, and select Save.
To create subsequent groups, in the groups menu, select
Options > Add new group, enter details for the group, and
select Save.
To edit group details, scroll to a group, select Options >
Group details, enter the new details, and select Save.
To delete a group, scroll to the group, and select Options >
Delete group.
Draft
43
Add a contact to a group
Select Menu > Contacts > Names, the contact you want
to add to a group, Details > Options > Add to group, and a
group.
Remove a contact from a group
Select Menu > Contacts > Groups, a group, View, scroll to
the contact you want to remove, and select Options >
Remove member > Yes.
■Speed dials
You can associate a number key from 2-9 with an entry in
the contacts list. To dial one of these entries, press and
hold the assigned key. To activate or deactivate speed
dialling, see "Call settings", page 50.
Assign a key to speed dialling
Select Menu > Contacts > Speed dials, scroll to an empty
speed dialling slot, and select Assign > Search, and the
desired contact.
Draft
44
If speed dialling is off, the device prompts you to turn
speed dialling on.
Change speed dialling numbers
Select Menu > Contacts > Speed dials, scroll to the speed
dialling entry you want to change, and select Options >
Change > Yes > Search, and the desired contact.
Delete speed dialling numbers
Select Menu > Contacts > Speed dials, scroll to the speed
dialling entry you want to delete, and select Options >
Delete > Yes.
■Service numbers
Your UIM card may include preinstalled service numbers
of your service provider (network service). To call a service
number, select Menu > Contacts > Service numbers.
■My number
To display the phone number of the device, select Menu >
Contacts >My numbers > View.
Draft
45
■Delete contacts entries
To delete all entries in your contacts list, select Menu >
Contacts > Delete all contacts > From phone mem. or
From SIM card > Yes, enter your security code, and select
OK.
■Move contacts
To move contacts between the device memory and the
UIM card, select Menu > Contacts > Move contacts.
■Copy contacts
To copy contacts between the phone memory and the UIM
card, select Menu > Contacts > Copy contacts.
Draft
46
6. Log
Call register stores information about your recent missed,
received, and dialled calls. Select Menu > Log and from
the following options:
Call log — View a list of all calls.
Missed calls — View a list of calls that have not been
answered.
Received calls — View a list of calls that have been
answered.
Dialled numbers — View a list of numbers that have been
dialled.
Message recipients — View a list of recent message
recipients.
Clear log lists — Clear any or all of the log lists.
Call duration — View the duration of calls. To reset the
timers, select Clear timers, enter your security code, and
select OK.
Data/fax calls — View details of data or fax calls.
Minibrowser calls — View details of Minibrowser calls.
Draft
47
7. Settings
In this menu, you can adjust various device
settings.
■Profiles
A profile defines how your phone reacts when you receive
a call or message, how your keypad sounds when you
press a key, and more. You can use the default settings or
personalise each profile.
To activate, personalise, or time a profile, select Menu >
Settings > Profiles, and from the available options.
Draft
48
Warning: With the flight profile you cannot make
or receive any calls, including emergency calls, or
use other features that require network coverage.
To make calls, you must first activate the phone
function by changing profiles. If the device has
been locked, enter the lock code. If you need to
make an emergency call while the device is locked
and in the flight profile, you may be also able to
enter an official emergency number programmed
in your device in the lock code field and select
’Call’. The device will confirm that you are about
to exit flight profile to start an emergency call.
■Display settings
To set a wallpaper, standby mode font colour, banner, and
more for the active profile, and also adjust other settings
for the display, select Menu > Settings > Display and from
the available options.
Draft
49
■Themes
Selecting a theme automatically loads a wallpaper, screen
saver, default ringing tone and background image for that
theme. You can also change individual settings.
To select a theme in the Gallery, select Menu > Settings >
Themes > Select theme.
To download a theme, select Menu > Settings > Themes >
Theme downloads.
■Tones
To configure the ringing volume, ringing tones, the
vibrating alert, keypad tones, and more for the active
profile, select Menu > Settings > Tones and from the
available options.
If you select the highest ringing tone level, the ringing
tone reaches its highest level after a few seconds.
■Date and time settings
To set the time and date, to set the time zone, to configure
date and time formats, or to activate auto-update of date
Draft
50
and time (network service), select Menu > Settings > Date
and time and from the available options.
■My shortcuts
To modify and assign shortcuts to the scroll key and left
and right selection keys, select Menu > Settings > My
shortcuts.
■Call settings
You can configure call settings such as speed dialling,
automatic redial, the default call reject message (see
"Make and answer calls", page 26), how you answer your
phone, the international prefix, calling card numbers, and
the information displayed during and after a call.
In the standby mode, select Menu > Settings > Call and
from the available options.
■Phone settings
To view and change phone settings such as phone
language, automatic keyguard, start-up tone, welcome
Draft
51
note, and what happens when you close the fold, select
Menu > Settings > Phone and from the available options.
■Connectivity settings
To configure settings for the USB data cable, select Menu
> Settings > Connectivity > USB data cable, and from the
available options.
■Enhancement settings
To configure settings for a compatible enhancement your
device is connected to, select Menu > Settings >
Enhancement settings and from the available options.
■Security settings
To configure security settings for your device, UIM card,
memory, and calls, select Menu > Settings > Security and
from the available options.
Draft
52
■Application settings
To configure application tones, lights, and vibration, select
Menu > Settings > Application settings and from the
available options.
■Network settings
To select the network mode and roaming options for your
device, select Menu > Settings > Network and from the
available options.
■Network services
You can configure network services such as call diverting,
call waiting, and other services. For service availability,
contact your service provider.
In the standby mode, select Menu > Settings > Network
services and from the available options.
Call barring and call diverting cannot be active at the
same time.
Draft
53
■Restore factory settings
You can reset some of the menu settings to their original
values. You can select whether to delete entered or
downloaded data (for example, entries in your contacts
list).
1. In the standby mode, select Menu > Settings > Restore
factory sett. and from the following options:
Restore settings only — Restore all preference settings
to default without deleting any personal data.
Restore all — Restore all default device settings and
delete all personal data.
2. Enter the security code, and select OK. See "Security
settings", page 51.
■Phone details
To view details such as user information, device software
and hardware version, system details, and icon
information, select Menu > Settings > Phone details and
from the available options.
Draft
54
8. Gallery
You can save pictures, recordings, and ringing tones to
folders in the Gallery and also add new folders.
To use the files to personalise your phone, in the standby
mode, select Menu > Gallery and from the available
options.
Draft
55
9. Media
■Radio
The radio depends on an antenna other than the wireless
device antenna. A compatible headset or enhancement
needs to be attached to the device for the radio to
function properly.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage
your hearing. Do not hold the device near your ear
when the loudspeaker is in use, because the
volume may be extremely loud.
Listen to the radio
1. Connect a compatible headset to the device.
2. In the standby mode, select Menu > Media > Radio.
The station location number, the name of the radio
station (if you have saved the station), and the
frequency of the radio station are displayed.
Draft
56
3. If you have saved radio stations, scroll up or down to
the station you want to listen to.
You can also select a radio station by pressing the
corresponding number keys.
Tune a radio station
1. When the radio is on, select or to change the
radio frequency in 0.05-MHz steps, or select and hold
or to search for a station. Searching stops
when a station is found.
2. To save the station to a memory location 1–9, press
and hold the corresponding number key.
To save the station in a memory location from 10 to 20,
press 1 or 2; and press and hold the desired number
key, 0–9.
3. Enter the name of the station, and select OK.
You can make or answer a call while listening to the radio.
During the call, the radio is muted.
Draft
57
■Recorder
You can record pieces of speech or sound with your device
and listen to them. You can record more than one voice
clip, depending on the available memory. The maximum
length of a recording is one minute.
Record speech or sound
1. In the standby mode, select Menu > Media > Recorder
> . The start tone indicates that recording has
begun.
2. To finish recording, select . Your recording is saved
to the Recordings folder in the Gallery.
Other options
To play or send the last recording, select Menu > Media >
Recorder > Options and from the available options.
Draft
58
10. Organiser
Your device contains time management applications,
including an alarm clock, a calendar, notes, a to-do list, a
calculator, a timer, and a stopwatch.
■Alarm clock
To set an alarm, select Menu > Organiser > Alarm clock.
You can set an alarm and select the repeat interval, alarm
tone, and snooze time. When an alarm is set, is
displayed in the standby mode.
The alarm sounds even when the device is switched off.
When the alarm sounds, your device beeps and lights up.
Select Stop to end the alarm, or Snooze to wait until the
alarm sounds again.
To turn off an alarm, select Menu > Organiser > Alarm
clock, scroll to the Alarm: field, and select Change > Off >
Options > Save.
Draft
59
■Calendar
You can store events in the calendar. You can also set an
alarm for these events.
The monthly view provides an overview of the selected
month and allows you to access a specific date. Dates in
bold contain calendar notes.
To open the calendar, select Menu > Organiser >
Calendar. To view a date, select Options > Go to date,
enter the date, and select OK.
To add a note, scroll to a date in the monthly view and
select Options > Make a note and from the available
options.
■Notes
You can write and save information in notes and send
notes as text messages. In the standby mode, select Menu
> Organiser > Notes.
To create a note when no notes have been saved, select
Add note, create your note, and select Save.
To use a note, select it, and select View or Options and
from the available options.
Draft
60
■To-do list
Use the to-do list to keep track of your tasks. You can save
a note for a task, and mark the note as done when you
have completed it. You can sort notes by priority or by
date. Select Menu > Organiser > To-do list and from the
available options.
■Calculator
The calculator can add, subtract, multiply, divide,
calculate squares and square roots, and convert currency
values.
Note: This calculator has limited accuracy and is
designed for simple calculations.
1. In the standby mode, select Menu > Organiser >
Calculator.
2. Enter the first number in the calculation. Press # for a
decimal point if necessary.
To add (+), subtract (-), multiply (*), or divide (/), press *
repeatedlly.
To perform a square or square root calculation, select
Options > Square or Square root.
Draft
61
3. Enter the second number in your calculation.
4. Select Equals to complete the calculation or Options
and from the available options.
Currency converter
You can convert between foreign and domestic
currencies.
Note: When you change base currency, you must
enter new exchange rates because all previously
set exchange rates are cleared.
In the standby mode, select Menu > Organiser >
Calculator > Options > Exchange rate and from the
available options.
■Countdown timer
With the countdown timer, you can set your device to
sound an alarm after a specified time has elapsed. Use the
normal timer to set a new time period for each task, or the
interval timer to store and reuse time periods.
The countdown timer only works when the device is on.
Draft
62
Normal timer
To set the normal timer, select Menu > Organiser >
Countdown timer > Normal timer. Enter the time in
HH:MM:SS format, and select OK. Enter a note for the
timer, and select Start.
When the countdown timer is set, is displayed in the
standby mode.
When the time runs out, your device sounds an alarm,
displays a timer note, and flashes.
To change the time, select Menu > Organiser >
Countdown timer > Change time. To stop the timer before
the alarm sounds, select Stop timer.
Interval timer
To save, edit, and use timers, select Menu > Organiser >
Countdown timer > Interval timer and from the available
options.
■Stopwatch
The stopwatch displays time in hours, minutes, seconds,
and fractions of a second in HH:MM:SS.SS format.
Draft
63
Using the stopwatch or allowing it to run in the
background when using other features increases the
demand on battery power and reduces the battery life.
To use the split time or lap time functions, select Menu >
Organiser > Stopwatch > Split timing or Lap timing >
Start.
If you press the end key and return to the standby mode,
the clock continues to run in the background, and is
displayed.
To return to the stopwatch, select Menu > Organiser >
Stopwatch > Continue. To stop the clock, select Stop.
Draft
64
11. Extras
Extras includes a group of extra features, including games,
a converter to convert measures from one unit to another,
and a world clock to see the current time in four locations.
■Games
In the standby mode, select Menu > Extras > Games to
access the games on your device.
■World clock
World clock allows you to see the current time in four
locations. To configure the locations, to set the time zone
and time format, or to view instructions, select Menu >
Extras > World clock > Options and from the available
options.
■Converter
To convert measures from one unit to another, select
Menu > Extras > Converter II.
Draft
65
Converter II has limited accuracy, and rounding errors
may occur.
To change the settings, select Options and from the
following options:
Set conversion — Select the unit to convert.
Clear All — Clear the display.
Reverse Conversion — Reverse the units being converted.
For example, pound to kilogram becomes kilogram to
pound.
Configure — Select the default units to convert.
Instructions — View further instructions.
Change Sign — Add or remove the minus sign after a unit
has been converted.
Draft
66
12. Enhancements
Check the model number of any charger
before use with this device. This device is
intended for use when supplied with
power from AC-6.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with
this particular model. The use of any other types
may invalidate any approval or warranty, and may
be dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Draft
67
13. Battery and charger
information
Your device is powered by a rechargeable battery. The
battery intended for use with this device is BL-5BT. This
device is intended for use when supplied with power from
the following charger: AC-6. The battery can be charged
and discharged hundreds of times, but it will eventually
wear out. When the talk and standby times are noticeably
shorter than normal, replace the battery. Use only Nokia
approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device. Use of
an unapproved battery or charger may present a risk of
fire, explosion, leakage, or other hazard.
If a battery is being used for the first time or if the battery
has not been used for a prolonged period, it may be
necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery. If the battery is
completely discharged, it may take several minutes before
the charging indicator appears on the display or before
any calls can be made.
Draft
68
Always switch the device off and disconnect the charger
before removing the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten
its lifetime. If left unused, a fully charged battery will lose
its charge over time.
Always try to keep the battery between 15°C and 25°C
(59°F and 77°F). Extreme temperatures reduce the
capacity and lifetime of the battery. A device with a hot or
cold battery may not work temporarily. Battery
performance is particularly limited in temperatures well
below freezing.
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object such as a coin,
clip, or pen causes direct connection of the positive (+)
and negative (-) terminals of the battery. (These look like
metal strips on the battery.) This might happen, for
example, when you carry a spare battery in your pocket or
purse. Short-circuiting the terminals may damage the
battery or the connecting object.
Draft
69
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of
batteries according to local regulations. Please recycle
when possible. Do not dispose as household waste.
Do not dismantle, cut, open, crush, bend, deform,
puncture, or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact
with the skin or eyes. In the event of such a leak, flush
your skin or eyes immediately with water, or seek medical
help.
Do not modify, remanufacture, attempt to insert foreign
objects into the battery, or immerse or expose it to water
or other liquids.
Improper battery use may result in a fire, explosion, or
other hazard. If the device or battery is dropped, especially
on a hard surface, and you believe the battery has been
damaged, take it to a service centre for inspection before
continuing to use it.
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged. Keep your battery
out of the reach of small children.
Draft
70
■Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from an authorised Nokia dealer, and inspect
the hologram label using the following steps:
Successful completion of the steps is not a total assurance
of the authenticity of the battery. If you have any reason
to believe that your battery is not an authentic, original
Nokia battery, you should refrain from using it, and take it
to the nearest authorised Nokia service point or dealer for
assistance. Your authorised Nokia service point or dealer
will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of
purchase.
Authenticate hologram
1. When you look at the hologram on
the label, you should see the Nokia
connecting hands symbol from one
angle and the Nokia Original
Enhancements logo when looking
from another angle.
Draft
71
2. When you angle the hologram left,
right, down and up, you should see 1,
2, 3 and 4 dots on each side
respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorised Nokia service point or dealer for assistance.
The use of a battery that is not approved by the
manufacturer may be dangerous and may result in poor
performance and damage to your device and its
enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
Draft
72
Care and maintenance
Your device is a product of superior design and craftsmanship and
should be treated with care. The following suggestions will help
you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of
liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, remove the
battery, and allow the device to dry completely before
replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving
parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns
to its normal temperature, moisture can form inside the
device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in
this guide.
• Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
Draft
73
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
• Use only the supplied or an approved replacement antenna.
Unauthorised antennas, modifications, or attachments could
damage the device and may violate regulations governing
radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes.
• To reset the device from time to time for optimum
performance, power off the device and remove the battery.
These suggestions apply equally to your device, battery, charger,
or any enhancement. If any device is not working properly, take it
to the nearest authorised service facility for service.
Draft
74
Additional safety information
■Small children
Your device and its enhancements may contain small parts. Keep
them out of the reach of small children.
■Operating environment
This device meets RF exposure guidelines when used either in the
normal use position against the ear or when positioned at least
2.2 centimetres (7/8 inch) away from the body. When a carry
case, belt clip or holder is used for body-worn operation, it should
not contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires a quality
connection to the network. In some cases, transmission of data
files or messages may be delayed until such a connection is
available. Ensure the above separation distance instructions are
followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
Draft
75
■Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they are
adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when
any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum
separation of 15.3 centimeters (6 inches) should be maintained
between a wireless device and an implanted medical device, such
as a pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who have
such devices should:
• Always keep the wireless device more than 15.3 centimeters
(6 inches) from the medical device when the wireless device is
turned on.
• Not carry the wireless device in a breast pocket.
• Hold the wireless device to the ear opposite the medical
device to minimise the potential for interference.
• Turn the wireless device off immediately if there is any reason
to suspect that interference is taking place.
Draft
76
• Read and follow the directions from the manufacturer of their
implanted medical device.
If you have any questions about using your wireless device with
an implanted medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as electronic
fuel injection systems, electronic antiskid (antilock) braking
systems, electronic speed control systems, and air bag systems.
For more information, check with the manufacturer, or its
representative, of your vehicle or any equipment that has been
added.
Only qualified personnel should service the device or install the
device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment in
your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same
compartment as the device, its parts, or enhancements. For
vehicles equipped with an air bag, remember that air bags inflate
Draft
77
with great force. Do not place objects, including installed or
portable wireless equipment in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could
result.
Using your device while flying in aircraft is prohibited. Switch off
your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation of
the aircraft, disrupt the wireless telephone network, and may be
illegal.
■Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you would
normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily
injury or even death. Switch off the device at refuelling points
such as near gas pumps at service stations. Observe restrictions
on the use of radio equipment in fuel depots, storage, and
distribution areas; chemical plants; or where blasting operations
are in progress. Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include below deck on
boats, chemical transfer or storage facilities and areas where the
air contains chemicals or particles such as grain, dust, or metal
Draft
78
powders. You should check with the manufacturers of vehicles
using liquefied petroleum gas (such as propane or butane) to
determine if this device can be safely used in their vicinity.
■Emergency calls
Important: This device operates using radio signals,
wireless networks, landline networks, and user-
programmed functions. If your device supports voice
calls over the internet (internet calls), activate both the
internet calls and the cellular phone. The device will
attempt to make emergency calls over both the cellular
networks and through your internet call provider if both
are activated. Connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless
device for essential communications like medical
emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal
strength. Depending on your device, you may also need to
complete the following:
• Insert a UIM card if your device uses one.
• Remove certain call restrictions you have activated in
your device.
Draft
79
• Change your profile from offline or flight profile mode to
an active profile.
2. Press the end key as many times as needed to clear the display
and ready the device for calls.
3. Enter the official emergency number for your present
location. Emergency numbers vary by location.
4. Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device may
be the only means of communication at the scene of an accident.
Do not end the call until given permission to do so.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio
waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR. The
SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram
Draft
80
(W/kg) averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested
frequency bands. The actual SAR level of an operating device can
be below the maximum value because the device is designed to
use only the power required to reach the network. That amount
changes depending on a number of factors such as how close you
are to a network base station. The highest SAR value under the
ICNIRP guidelines for use of the device at the ear is 0.86 W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on national
reporting and testing requirements and the network band.
Additional SAR information may be provided under product
information at www.nokia.com.
Your mobile device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA). These requirements set a
SAR limit of 1.6 W/kg averaged over one gram of tissue. The
highest SAR value reported under this standard during product
certification for use at the ear is 1.28 W/kg and when properly
worn on the body is 0.73 W/kg.
Information about this device model can be found at
http://ww.fcc.gov/oet/ea by searching the equipment
authorization system using FCC ID QMNRM-376.
Draft
81
■Technical information
Type designation — RM-376
Dimensions — Width 42 mm; length 82 mm; depth 14 mm
Weight — 67 g with 870 mAh Li-Ion Battery (BL-5BT)
Display — 1.8" 128x160 pixels, 262K colours
Wireless networks — CDMA 800 MHz, CDMA 2000 1xRTT, CSD
14.4
Frequency range (Tx) — Cellular 824-849 MHz
Frequency range (Rx) — Cellular 869-894 MHz
■Battery Information
This section provides information about battery charging times
with the AC-6 charger, and talk and standby times. Be aware that
the information in this section is subject to change. For more
information, contact your service provider.
Important: Battery talk and standby times are estimates
only and depend on signal strength, network conditions,
features used, battery age and condition, temperatures
to which battery is exposed, use in digital mode, and
many other factors. The amount of time a device is used
for calls will affect its standby time. Likewise, the
amount of time that the device is turned on and in the
standby mode will affect its talk time.
Draft
82
Charging times
Talk and standby times
Charger options AC-6
BL-5BT 870 mAh Li-lon battery Up to 3 hours
Function Digital
Talk time Minimum 3.5 hours
Standby time Minimum 240 hours
Draft