Microsoft RM-42 GSM 900/1800/1900 Cellular Telephone W/BT User Manual

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone W/BT

UserManual.wiki >

Microsoft >

RM-42 User Manual >

Manaul HTML Version

1. Manual
2. Manaul

Manaul

Nokia XXXX User Guide

923xxxx

DRAFT EN

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole

responsibility that the product RM-42 is in conformity

with the provisions of the following Council Directive:

1999/5/EC. A copy of the Declaration of Conformity

can be found at http://www.nokia.com/phones/

declaration_of_conformity/

Part No. 923xxxx, Issue NO. 1

Reproduction, transfer, distribution or storage of part or all of the contents in this

document in any form without the prior written permission of Nokia is prohibited.

Nokia, Nokia Connecting People, the Nokia Original Enhancements logos, Nokia

xxxx, and Pop-Port are trademarks or registered trademarks of Nokia Corporation.

Other product and company names mentioned herein may be trademarks or

tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

2005. Symbian and Symbian OS are trademarks of Symbian Ltd.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun

Microsystems, Inc.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.

Other patents pending.

5016009, 5126739, 5146221, and 5414425. Other patents pending.

Part of the software in this product is © Copyright ANT Ltd. 1998. All rights

reserved.

US Patent No 5818437 and other pending patents. T9 text input software Copyright

MPEG-4

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for

personal and non-commercial use in connection with information which has been

encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged

in a personal and non-commercial activity and (ii) for use in connection with

MPEG-4 video provided by a licensed video provider. No license is granted or shall

be implied for any other use. Additional information including that relating to

promotional, internal and commercial uses may be obtained from MPEG LA, LLC.

See <http://www.mpegla.com>.

The information contained in this user guide was written for the Nokia xxxx. Nokia

operates a policy of ongoing development. Nokia reserves the right to make

changes to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income

or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided ‘as is’. Except as required by applicable

law, no warranties of any kind, either express or implied, including, but not limited

to, the implied warranties of merchantability and fitness for a particular purpose,

are made in relation to the accuracy, reliability or contents of this document. Nokia

reserves the right to revise this document or withdraw it at any time without prior

notice.

The availability of particular products may vary by region. Please check with the

Nokia dealer nearest to you.

Export Controls

This device may contain commodities, technology or software subject to export

laws and regulations from the US and other countries. Diversion contrary to law is

prohibited.

FCC / INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a

telephone in close proximity to receiving equipment). The FCC or Industry Canada

can require you to stop using your telephone if such interference cannot be

eliminated. If you require assistance, contact your local service facility. This device

complies with part 15 of the FCC rules. Operation is subject to the condition that

this device does not cause harmful interference.

Manufactured or sold under one or more following US Patents.

4868846 5378935 5577024 5726593 5826191 5907796 5970059

4945633 5396653 5581244 5726981 5827082 5912885 5977887

4969192 5400949 5590160 5729534 5832381 5914690 5987137

5012208 5408504 5590415 5729541 5832524 5915440 5987406

5016851 5410733 5594948 5732831 5835858 5917907 5987406

5045973 5416435 5596571 5734683 5835862 5918049 5987639

5059131 5420552 5597102 5737323 5835889 5920619 5991627

5127844 5428602 5598125 5737410 5838672 5920812 5991716

5128965 5430740 5603103 5740129 5839059 5920826 5999523

5168982 5432473 5606548 5748720 5841774 5924026 6005857

5173927 5437056 5613235 5752165 5842141 5924038 6009127

5200997 5444816 5621367 5752172 5845219 5926138 6009328

5218270 5446364 5625274 5754595 5850607 5926147 6011853

5229701 5450487 5633913 5754976 5857151 5930233 6011971

5230091 5471655 5634197 5758278 5859843 5936979 6014113

5241583 5473284 5638034 5760568 5862178 5940790 6014573

5267234 5479476 5640395 5761245 5862489 5941978 6018277

5270666 5479481 5652748 5779115 5870683 5944844 6023740

5271056 5485635 5664004 5786703 5884103 5945952 6026161

5289059 5487084 5664053 5787341 5884176 5946326 6028567

5292259 5490235 5669069 5787357 5884190 5946634 6029128

5293139 5491718 5678192 5793744 5887266 5946651 6031827

5307371 5493255 5678224 5796757 5889770 5953665 6035189

5311179 5493701 5692032 5797102 5890005 5956323 6035194

5313661 5524288 5692105 5802465 5892475 5956332 6035201

5317283 5534878 5697074 5805084 5893060 5956625 6038238

5319525 5537557 5699482 5805301 5895884 5956633 6038695

5331638 5564074 5701392 5806003 5896369 5960354 6041120

5350956 5565821 5706110 5809018 5898775 5960389 6041234

5351235 5566201 5706285 5809115 5898925 5963634 6041235

5357222 5568545 5712845 5812835 5901353 5963901 6043760

5361459 5570369 5715522 5819165 5905235 5966374 6044264

5365119 5574985 5722074 5821735 5907480 5966378 6047181

6047196 6112078 6167248 6229996 6308066 6369635 6429746

6049796 6112099 6167256 6240076 6308084 6370362 6430163

6050415 6115617 6167273 6240079 6314683 6370367 6430189

6052385 6118775 6170073 6243455 6317083 6370389 6430721

6055439 6119002 6171127 6243582 6317588 6370390 6434133

6058317 6119003 6172673 6249584 6320330 6370391 6437711

6060193 6119180 6173301 6253089 6321083 6370591 6438229

6072787 6121846 6173302 6259312 6321257 6374083 6438370

6073001 6122498 6175623 6259323 6324074 6374118 6439905

6075789 6125267 6178535 6259676 6324281 6377803 6441591

6076181 6128322 6184592 6262735 6324389 6377817 6441689

6078570 6128509 6185302 6265928 6327153 6381453 6442386

6081534 6130650 6188909 6266321 6327256 6381468 6445924

6081732 6134439 6192055 6266330 6333716 6385054 6445928

6084868 6137789 6192238 6266516 6341220 6385446 6445932

6084920 6137836 6195338 6269126 6341221 6385451 6449264

6085605 6140966 6198928 6269331 6343131 6392503 6449473

6088342 6141410 6199035 6271794 6347138 6392605 6449480

6088746 6144243 6201818 6274825 6347218 6393008 6452914

6091440 6144660 6201876 6275708 6347945 6393121 6453179

6091955 6144676 6201974 6278688 6350133 6393260 6455188

6094426 6144709 6202109 6282436 6351470 6393518 6456237

6094587 6145095 6202163 6285884 6351647 6396878 6456826

6094661 6148103 6204727 6285888 6351842 6397074 6461193

6097961 6148209 6204830 6285889 6356468 6397081 6463262

6097964 6151485 6205172 6286122 6356759 6400958 6463278

6098194 6151507 6208961 6292669 6356766 6407532 6463502

6105784 6154455 6209050 6295286 6359865 6408063 6465896

6107743 6154457 6209173 6298035 6359904 6415163 6466033

6107986 6163546 6222730 6300887 6363252 6415410 6466585

6108323 6163708 6222924 6301338 6363259 6417817 6469673

6109972 6164547 6223037 6304652 6365854 6418326 6470313

6111944 6167038 6223059 6307512 6366659 6427078 6222924

6473016 6539236 6584314 6643513 6680955 6738370 681363

6473594 6542170 6587680 6646841 6681099 6741860 681671

6473611 6542606 6587695 6646998 6681253 6744742 681672

6473622 6542931 6587817 6647006 6683860 6748076 681683

6477151 6546251 6591116 6647248 6687499 6748219 681992

6480485 6549773 6593914 6647249 6690307 6751227 682258

6480715 6550927 6594472 6650905 6691085 6751472 683418

6483051 6553065 6594486 6654589 6693892 6760317 683418

6487288 6553107 6597319 6658064 6694135 6763011 RE385

6487397 6556550 6597914 6658256 6694141 6763019

6487424 6556824 6597917 6661404 6697347 6763035

6493564 6560458 6600663 6661780 6697604 6766159

6497364 6560460 6603773 6662155 6697624 6771619

6498785 6563801 6606508 6662986 6707428 6771631

6501957 6567389 6606593 6664844 6708028 6771964

6501967 6570596 6611507 6665284 6711211 6775228

6504595 6570860 6611693 6665289 6711689 6775259

6507590 6570909 6614860 6665309 6714091 6778521

6510148 6570933 6614905 6665692 6714784 6778839

6512756 6571095 6615044 6667963 6717925 6782269

6516193 6574336 6615169 6668162 6717928 6788702

6519241 6574473 6621910 6671286 6718179 6788798

6522670 6577204 6622011 6671287 6721304 6788952

6522877 6577619 6625452 6671495 6721374 6788959

6526290 6580920 6625458 6671511 6721700 6791966

6529561 6580932 6628731 6674733 6721867 6792277

6529717 6582147 6629130 6674860 6721871 6792278

6532226 6584089 6633536 6675012 6724892 6801786

6532227 6584161 6633618 6678361 6724944 6801796

6532257 6584164 6633768 6678368 6728241 6807421

6535979 6584314 6636491 6678527 6728548 6810272

6538449 6587680 6639905 6678531 6728555 6813280

6538613 6587695 6639950 6680913 6735249 6813503

Contents

For your safety...........................................8

Welcome.................................................. 12

Accessibility solutions........................................................12

Updates ..................................................................................12

Find information about your device...............................13

Contact your service provider..........................................13

Personalize your phone .......................... 14

Profiles—Set tones...............................................................15

Transfer content from another phone...........................16

Change the look of your phone.......................................16

Active standby mode..........................................................17

Your phone .............................................. 19

Modes .....................................................................................19

Essential indicators.............................................................21

Attach the wrist strap........................................................22

Configure settings...............................................................22

Nokia support on the Web................................................22

Help .........................................................................................22

Clock ....................................................................................... 23

Volume and loudspeaker control.................................... 24

File manager .........................................................................24

Memory card tool................................................................ 25

Make calls ................................................27

Voice calls ............................................................................. 27

Video calls ............................................................................. 29

Video sharing ......................................................................30

Answer or reject a call.......................................................33

Log...........................................................................................35

Contacts (Phonebook).............................37

Save names and numbers................................................. 37

Copy contacts.......................................................................38

Add ringing tones for contacts ....................................... 39

Create contact groups .......................................................39

Camera and Gallery .................................41

Camera ................................................................................... 41

Gallery ....................................................................................53

Imaging.....................................................57

Image print ........................................................................... 57

RealPlayer™........................................................................... 58

Movie Director director..................................................... 60

Messaging.................................................63

Write text.............................................................................. 64

Write and send messages ................................................. 66

Inbox—receive messages................................................... 69

My folders ............................................................................ 70

Mailbox.................................................................................. 70

Outbox—messages waiting to be sent .......................... 73

View messages on a SIM card......................................... 73

Messaging settings............................................................. 73

Calendar....................................................78

Create calendar entries ..................................................... 78

Calendar views..................................................................... 79

Remove calendar entries................................................... 79

Calendar settings ................................................................ 80

Web...........................................................81

Access the Web ................................................................... 81

Bookmarks view................................................................... 82

Make a connection............................................................. 82

Browse.................................................................................... 83

Download and purchase items........................................ 85

End a connection ................................................................ 85

Web settings......................................................................... 85

Office........................................................87

Calculator .............................................................................. 87

Converter ............................................................................... 87

To-do ...................................................................................... 88

Notes ...................................................................................... 88

Recorder................................................................................. 89

My own.....................................................90

Go to—add shortcuts.......................................................... 90

IM—Instant messaging (chat) ........................................ 90

Connectivity .............................................97

Bluetooth connection ........................................................ 97

PC connections ..................................................................100

Connection manager........................................................101

Remote synchronization .................................................102

Device manager.................................................................103

Tools....................................................... 105

Settings................................................................................105

Cover display settings......................................................115

Voice commands ...............................................................115

Application manager........................................................115

Activation keys—handle copyright-protected files .118

Troubleshooting .................................... 119

Q&A...................................................................................... 119

Enhancements ....................................... 123

Power ................................................................................... 123

Data...................................................................................... 123

Audio.................................................................................... 124

Accessibility ....................................................................... 124

Car......................................................................................... 124

Imaging and lifestyle....................................................... 124

Battery information.............................. 125

Charging and discharging.............................................. 125

Nokia battery authentication guidelines................... 125

Care and maintenance ......................... 127

Additional safety information............. 128

Index ...................................................... 133

For your safety

Read these simple guidelines. Not following them may be

dangerous or illegal. Read the complete user guide for

further information.

SWITCH ON SAFELY Do not switch the

phone on when wireless phone use is

prohibited or when it may cause interference

or danger.

ROAD SAFETY COMES FIRST Obey all local

laws. Always keep your hands free to operate

the vehicle while driving. Your first

consideration while driving should be road

safety.

INTERFERENCE All wireless phones may be

susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS Follow any

restrictions. Switch the phone off near

medical equipment.

SWITCH OFF IN AIRCRAFT Follow any

restrictions. Wireless devices can cause

interference in aircraft.

SWITCH OFF WHEN REFUELING Do not use

the phone at a refuelling point. Do not use near

fuel or chemicals.

SWITCH OFF NEAR BLASTING Follow any

restrictions. Do not use the phone where

blasting is in progress.

USE SENSIBLY Use only in the normal

position as explained in the product

documentation. Do not touch the antenna

unnecessarily.

QUALIFIED SERVICE Only qualified personnel

may install or repair this product.

ENHANCEMENTS AND BATTERIES Use only

approved enhancements and batteries. Do not

connect incompatible products.

WATER-RESISTANCE Your phone is not

water-resistant. Keep it dry.

BACK-UP COPIES Remember to make

back-up copies or keep a written record of all

important information.

CONNECTING TO OTHER DEVICES When

connecting to any other device, read its user

guide for detailed safety instructions. Do not

connect incompatible products.

EMERGENCY CALLS Ensure the phone

function of the phone is switched on and in

service. The keypad is active only in the Fold

open mode. Press as many times as

needed to clear the display and return to the

start screen. Enter the emergency number,

then press . Give your location. Do not end

the call until given permission to do so.

About your device

The wireless device described in this guide is approved for

use on the EGSM 900/1800/1900 and UMTS 2000

networks. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and

respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws

and respect local customs as well as privacy and legitimate

rights of others.

Warning: To use any features in this device, other

than the alarm clock, the device must be switched on.

Do not switch the device on when wireless device use

may cause interference or danger.

Network Services

To use the phone you must have service from a wireless

service provider. Many of the features in this device

depend on features in the wireless network to function.

These network services may not be available on all

networks or you may have to make specific arrangements

with your service provider before you can utilize network

services. Your service provider may need to give you

additional instructions for their use and explain what

charges will apply. Some networks may have limitations

that affect how you can use network services. For

instance, some networks may not support all language-

dependent characters and services. Network features are

designated in this guide by .

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Your device may

also have been specially configured. This configuration

may include changes in menu names, menu order and

icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL)

that run on TCP/IP protocols. Some features of this device,

such as MMS, browsing, e-mail and content downloading

using browser or over MMS, require network support for

these technologies.

For availability and information on using SIM card

services, contact your SIM card vendor. This may be the

service provider, network operator, or other vendor.

Enhancements, batteries, and

chargers

Always switch the device off and disconnect the charger

before removing the battery.

Check the model number of any charger before use with

this device. This device is intended for use when supplied

with power from DC-4, AC-3 and AC-4 chargers, and from

ACP-12 and LCH-12 chargers when used with the

charging adapter CA-44.

The battery intended for use with this device is BL-5B.

Warning: Use only batteries, chargers, and

enhancements approved by Nokia for use with this

particular model. The use of any other types may

invalidate any approval or warranty, and may be

dangerous.

For availability of approved enhancements, please check

with your dealer. When you disconnect the power cord of

any enhancement, grasp and pull the plug, not the cord.

Welcome

Congratulations on your purchase of the Nokia xxxx

mobile device. Your device provides many functions that

are practical for daily use, such as a calendar, a clock, an

alarm clock, and messaging.

You can personalize your device with ringing tones and

themes. See "Personalize your phone," page 23.

Other features on your device are:

• Multimedia messaging. See “Messaging” on page 43.

• Instant messages. See “IM—instant messaging (chat)”

on page 74.

• RealPlayer™. See “RealPlayer™” on page 40.

• Bluetooth technology. See “Connectivity” on page 80.

• J2ME™ (Java 2 Platform, Micro Edition). See

“Application manager” on page 98.

• Web browser. See “Web” on page 61.

Accessibility solutions

Nokia is committed to making mobile devices easy to use

for all individuals, including those with disabilities. For

more information, visit www.nokiaaccessibility.com.

Make sure to register your phone at

www.warranty.nokiausa.com or 1-888-NOKIA-2U

(1-888-665-4228) so that we can serve your needs better

if you should need to call the center or have your device

repaired.

(including ringing tones) and other content from being

copied, modified, transferred, or forwarded.

Updates

From time to time, Nokia may update this guide to reflect

changes. The latest version may be available at

www.nokiausa.com. Also, an interactive tutorial may be

available at www.nokiausa.com.

Welcome

Find information about your

device

Information about your device is provided on the device

label, which is on the back of the device under the battery.

The label contains the model and serial numbers, as well as

the following:

• Device type (such as RM-58)

• Device model (such as Nokia 6682 device)

• International mobile equipment identity (IMEI)

• FCC ID number

Contact your service provider

In many cases, the service provider will make available

descriptions of its services and instructions for using

features, such as the following:

• Voice mail and voice privacy

• Call waiting, call forwarding, and caller ID

• Messaging

• News and information services

• Selected Internet services

Service providers may differ in their support of features.

Before you sign up with a service provider, make sure that

the service provider supports the features that you need.

Personalize your phone

Your service provider may have requested that certain

features be disabled or not activated in your device. If so,

they will not appear on your device menu. Your device

may also have been specially configured for your network

provider. This configuration may include changes in menu

names, menu order and icons. Contact your service

provider for more information.

• To use the standby main display for fast access to your

most frequently used applications, see ‘Active standby

mode’, p. 17.

• To change the standby

mode background image

or what is shown in the

screen saver, see ‘Change

the look of your phone’,

p. 16, and ‘Cover display

settings’, p. 115.

• To customize the ringing

tones, see ‘Profiles—Set

tones’, p. 15.

• To change the shortcuts

assigned for the different

presses of the scroll key and left and right selection

keys in the standby mode, see ‘Standby mode’, p. 105.

The scroll key shortcuts are not available if the active

standby is on.

• To change the clock shown in the standby mode, press

, and select Clock > Options > Settings > Clock

type > Analog or Digital.

• To change the clock alarm tone, press , and select

Clock > Options > Settings > Clock Alarm tone and a

tone.

• To change the calendar alarm tone, press , and select

Calendar > Options > Settings.

• To change the welcome note to an image or animation,

press , and select Tools > Settings > Phone >

General > Welcome note or logo.

• To assign an individual ringing tone to a contact, press

, and select Contacts. See ‘Add ringing tones for

contacts’, p. 39.

• To assign a 1-touch dial to a contact, press a numbered

key in the standby mode ( is reserved for the voice

mailbox), and press . Select Yes, then select a

contact.

• To rearrange the main menu, in the main menu, select

Options > Move, Move to folder, or New folder. You

can move less used applications into folders, and place

applications that you use more often into the main

menu.

Personalize your phone

Profiles—Set tones

To set and customize the ringing tones, message alert

tones, and other tones for different events, environments,

or caller groups, press , and select Tools > Profiles. If the

currently selected profile is other than Normal, the profile

name is shown at the top of the display in the standby

mode.

To change the profile, press in the standby mode.

Scroll to the profile you want to activate, and select OK.

To modify a profile, press , and select Tools > Profiles.

Scroll to the profile, and select Options > Customize.

Scroll to the setting you want to change, and press to

open the choices. Tones stored on the memory card are

indicated with . You can scroll through the tone list and

listen to each one before you make your selection. Press

any key to stop the sound.

Tip! When you choose a tone, Tone downloads opens

a list of bookmarks. You can select a bookmark and

start connection to a Web page to download tones.

Tip! For information on how to change the alert tone

for the calendar or clock, see ‘Personalize your phone’,

p. 14.

To create a new profile, select Options > Create new.

Offline profile

The Offline profile lets you use the phone without

connecting to the wireless network. When you activate

the Offline profile, the connection to the wireless network

is turned off, as indicated by in the signal strength

indicator. All wireless phone signals to and from the

device are prevented. If you try to send messages, they are

placed in the outbox to be sent later.

Warning: In the offline profile you cannot make (or

receive) any calls, except make calls to certain

emergency numbers, or use other features that require

network coverage. To make calls, you must first

activate the phone function by changing profiles. If the

device has been locked, enter the lock code.

Warning: Your device must be switched on to use

Offline profile. Do not switch the device on when

wireless device use is prohibited or when it may cause

interference or danger.

To leave the Offline profile, press , and select Tools >

Profiles, select another profile, and select Options >

Activate > Yes. The phone re-enables wireless

transmissions (providing there is sufficient signal

strength). If a Bluetooth connection is activated before

entering the Offline profile, it will be deactivated. A

Bluetooth connection is automatically reactivated after

Personalize your phone

leaving the Offline profile. See ‘Bluetooth connection

settings’, p. 97.

Transfer content from

another phone

You can copy contacts, calendar, images, video, and sound

clips using a Bluetooth connection, from a compatible

Nokia Series 60 phone.

You can use your Nokia XXXX device without a SIM card.

The offline profile is automatically activated when the

phone is switched on without a SIM card. This allows you

to use the SIM card in another phone.

To avoid duplicate entries, you can transfer the same type

of information, for example, contacts, from the other

phone to your Nokia XXXX only once.

Before starting the transfer, you must activate Bluetooth

connectivity on both phones. On each phone press ,

and select Connect. > Bluetooth. Select Bluetooth > On.

Give a name to each phone.

To transfer content:

1Press , and select Tools > Transfer on your Nokia

XXXX device. Follow the instructions on the screen.

2The phone searches for devices with Bluetooth

connectivity. When it has finished the search, select

your other phone from the list.

3You are asked to enter a code on your Nokia XXXX

device. Enter a code (1-16 digits), and select OK. Enter

the same code on the other phone, and select OK.

4The Transfer application is sent to the other phone as

a message.

5Open the message to install Transfer on the other

phone, and follow the instructions on the screen.

6From your Nokia XXXX device, select the content you

want to copy from the other phone.

Content is copied from the memory and memory card of

the other phone to your Nokia XXXX device and memory

card. Copying time depends on the amount of data to be

transferred. You can cancel copying and continue later. The

Transfer application is added to the main menu of the

other phone.

Change the look of your

phone

To change the look of your phone displays, such as the

wallpaper and icons, press , and select Tools > Themes.

The active theme is indicated by . In Themes you can

group together elements from other themes or select

images from the Gallery to personalize themes further. The

Personalize your phone

themes on the memory card are indicated by . The

themes on the memory card are not available if the

memory card is not inserted in the phone. If you want to

use the themes saved in the memory card without the

memory card, save the themes in the phone memory first.

See also ‘Cover display settings’, p. 115.

To open a browser connection and download more themes,

select Theme downloads.

To activate a theme, scroll to it, and select Options >

Apply.

To preview a theme, scroll to it, and select Options >

Preview.

To edit themes, scroll to a theme, and select Options > Edit

to change the following options:

•Wallpaper—The image to be shown as a background

image in the standby mode.

•Screen saver—The screen saver type on the main

display: date and time, or a text you have written

yourself. See also Screen saver timeout, p. 106.

•Image in ’Go to’—The background image for the Go to

application.

To restore the selected theme back to its original settings,

select Options > Restore orig. theme when you edit a

theme.

Active standby mode

Use your standby main display for fast access to your most

frequently used applications. By default, the active

standby mode is on.

Press , select Tools > Settings > Phone > Standby

mode > Active standby, and press to switch the active

standby on or off.

The active standby display is

shown with default

applications across the top of

the screen, and calendar,

to-do, and player events

listed below.

Scroll to an application or

event, and press .

The standard scroll key

shortcuts available in the

standby mode cannot be

used when the active standby mode is on.

To change the default applications shortcuts:

1Press , select Tools > Settings > Phone > Standby

mode > Active standby apps., and press .

2Highlight a shortcut to an application, and select

Options > Change.

3Select a new application from the list, and press .

Personalize your phone

Some shortcuts may be fixed, and you are not able to

change them.

Your phone

Modes

Your phone has four mechanical modes that support

different use situations: Fold closed, Fold open for using

the phone, Imaging for recording video and taking

pictures, and Camera for taking pictures. To switch

between the modes, turn the fold and the swing axis

camera. There is a short time-out before a mode is

activated.

Fold open mode

When you open the fold, the Fold

open mode is activated

automatically: the main display

lights up, the keypad is available,

and you can access the menu. You

can scroll in the menu with the

scroll key or the joystick.

The Fold open mode is activated

even if the fold is not fully opened.

The fold opens close to 150

degrees, as shown in the picture.

Do not force the fold to open more.

Fold closed mode

When the fold of the phone is closed, the

main display is deactivated and the cover

display lights up. Ongoing calls are

ended, unless the loudspeaker is in use or

a headset is connected. If you are using

the player to listen to a sound clip, it

continues to play.

In the Fold closed mode, the cover display

provides limited functions. On the

standby mode display, the signal strength

and battery indicators, operator logo,

time information, status indicators, and the name of the

currently active profile (if other than Normal) may be

shown. If you are listening to a sound clip, volume bars

and track information are displayed.

If the keypad is not locked, you can use the power key, the

joystick, and the capture key (for enhanced voice

commands). To select commands on the display, such as

Show and Back, move the joystick to highlight the desired

text, and press the joystick.

Calendar and clock alarms and notes for missed calls and

new received messages are also displayed. You can view

Your phone

received text messages and the text and image objects of

received multimedia messages on the cover display. To

view other types of messages, open the fold, and view the

message on the main display.

Incoming calls are indicated by their normal tone and a

note. To answer a call and use the handset, open the fold.

To answer a call and use the loudspeaker, select

Answer. If a headset is connected to the phone, press the

answer key on the headset.

To make calls or use the menu, open the fold.

Imaging mode

In the Imaging mode, you can record videos, take pictures,

edit video clips and images, and send live video during a

video call . See ‘Camera and Gallery’, p. 41 and ‘Video

calls’, p. 29.

To activate the Imaging

mode, open the fold up to

90 degrees, hold the

phone sideways, and turn

the fold up so that the

main display faces you.

The camera starts, and you

can see the view to be

captured. You can also

turn the swing axis

camera. In the Imaging mode, the camera unit turns 180

degrees counterclockwise and close to 135 degrees

clockwise. Do not force the camera unit to turn more.

In the Imaging mode, the keypad is not active. You can use

the capture key, joystick, power key, the upper and lower

selection keys next to the main display, and to end an

active call.

Warning: You cannot make emergency calls in the

Imaging mode, because the keypad is not active. To make

an emergency call, activate the Fold open mode.

Camera mode

In the Camera mode, you

can take pictures quickly.

You can use the camera

during an active call. See

‘Camera and Gallery’, p.

41.

To activate the Camera

mode, turn the swing axis

camera when the fold of

the phone is closed. The viewfinder appears on the cover

display. The camera unit turns 180 degrees

counterclockwise and close to 135 degrees clockwise. Do

not force the camera unit to turn more.

Your phone

You can use the capture key, joystick, and power key in the

Camera mode.

Essential indicators

—The phone is being used in a GSM network.

(network service)—The phone is being used in a UMTS

network. See ‘Network’, p. 114.

—You have received one or several messages to the

Inbox folder in Messaging.

—There are messages waiting to be sent in the Outbox

folder. See ‘Outbox—messages waiting to be sent’, p. 73.

—You have missed calls. See ‘Recent calls’, p. 35.

—Shown if Ringing type is set to Silent and Message

alert tone, IM alert tone, and E-mail alert tone are set

to Off. See ‘Profiles—Set tones’, p. 15.

—The phone keypad is locked. See ‘Keypad lock

(Keyguard)’ in the Quick start guide.

—You have an active clock alarm. See ‘Clock’, p. 23.

—The second phone line is being used. See ‘Call

settings’, p. 106.

—All calls to the phone are forwarded to another

number. If you have two phone lines, the forwarding

indicator for the first line is and for the second

—A headset is connected to the phone.

—A loopset is connected to the phone.

—A car kit with Bluetooth is connected to the phone.

—The connection to a headset with Bluetooth has been

lost.

—A data call is active.

—A GPRS or EDGE packet data connection is available.

—A GPRS or EDGE packet data connection is active.

—A GPRS or EDGE packet data connection is on hold.

These icons are shown instead of the signal strength

indicator (shown in the top left corner in the standby

mode). See ‘Packet data connections in GSM and UMTS

networks’, p. 108.

—A UMTS packet data connection is available.

—A UMTS packet data connection is active.

—A UMTS packet data connection is on hold.

—Bluetooth connectivity is On.

—Data is being transmitted using a Bluetooth

connection. See ‘Bluetooth connection’, p. 97.

—A USB connection is active.

Your phone

—You have an e-mail that has been read, waiting for

you to retrieve to your phone.

—You have an e-mail that has not been read, waiting

for you to retrieve to your phone.

Attach the wrist strap

Thread the strap as shown in the

picture, and tighten it.

Configure settings

To use multimedia messaging, GPRS, Internet, and other

wireless services, you must have the proper configuration

settings on your phone.

You may have settings from your service providers already

installed in your phone, or you may receive the settings

from the service providers as a special text message. See

‘Data and settings’, p. 69. For more information on the

availability of the settings, contact your network operator,

service provider, nearest authorized Nokia dealer, or visit

the support area on the Nokia website, www.nokia.com/

support.

Nokia support on the Web

Check www.nokia.com/support or your local Nokia Web

site for the latest version of this guide, additional

information, downloads, and services related to your Nokia

product.

Help

Your phone has context-sensitive help. You can access the

help from an application or from the main menu.

When an application is open, to access help for the current

view, select Options > Help.

Example: To view instructions on how to create a

contact card, start to create a contact card, and select

Options > Help.

When you are reading the instructions, to switch between

help and the application that is open in the background,

press and hold .

To open help from the main menu, select Tools > Help.

Select the desired application to view a list of help topics.

To search for help topics using keywords, select Options >

Search by keyword.

Your phone

When you are reading a help topic, to view other related

topics, press or .

Clock

Press , and select Clock.

To set a new alarm, select Options > Set alarm. Enter the

alarm time, and select OK. When the alarm is active, the

indicator is shown.

To turn off the alarm, select Stop. When the alarm tone

sounds, press any key, or select Snooze to stop the alarm

for five minutes, after which it resumes. You can do this a

maximum of five times.

If the alarm time is reached while the device is switched

off, the device switches itself on and starts sounding the

alarm tone. If you select Stop, the device asks whether you

want to activate the device for calls. Select No to switch

off the device or Yes to make and receive calls. Do not

select Yes when wireless phone use may cause

interference or danger.

To cancel an alarm, select Clock > Options > Remove

alarm.

Clock settings

To change the clock settings, select Options > Settings in

the clock.

To change the clock shown in the standby mode, scroll

down, and select Clock type > Analog or Digital.

To allow the mobile phone network to update the time,

date, and time zone information to your phone , scroll

down, and select Auto time update. For the Auto time

update setting to take effect, the phone restarts.

To change the alarm tone, scroll down, and select Clock

alarm tone.

To change the daylight-saving time status, scroll down,

and select Daylight-saving. Select On to add one hour to

the My current city time. See ‘World clock’, p. 23. When

the daylight-saving is active, the indicator is shown in

the clock main view.

World clock

Open Clock, and press to open the world clock view.

In the world clock view, you can view the time in different

cities.

To add cities to the list, select Options > Add city. Enter

the first letters of the city name. The search field appears

automatically, and the matching cities are displayed.

Your phone

Select a city. You can add a maximum of 15 cities to the

list.

To set your current city, scroll to a city, and select

Options > My current city. The city is displayed in the

clock main view, and the time in your phone is changed

according to the city selected. Check that the time is

correct and matches your time zone.

Volume and loudspeaker control

To increase or decrease the volume

level, when you have an active call or

are listening to a sound, press or

, respectively, or move the joystick right or left.

The built-in loudspeaker allows you to speak and listen to

the phone from a short distance without having to hold

the phone to your ear, for example, having it on a table

nearby. Sound applications use the loudspeaker by

default.

Warning: Do not hold the device near your ear when

the loudspeaker is in use, because the volume may be

extremely loud.

To locate the loudspeaker, see ‘Keys and parts’ in the

Quick start guide.

To use the loudspeaker during a call, start a call, and select

Options > Activate loudsp..

To turn off the loudspeaker when you have an active call

or are listening to a sound, select Options > Activate

handset.

File manager

Many features of the phone use memory to store data.

These features include contacts, messages, images, ringing

tones, calendar and to-do notes, documents, and

downloaded applications. The free memory available

depends on how much data is already saved in the phone

memory. You can use a memory card as extra storage

space. Memory cards are rewritable, so you can delete and

save data on a memory card.

To browse files and folders in the phone memory or on a

memory card (if inserted), press , and select Tools > File

mgr.. The phone memory view ( ) opens. Press to

open the memory card view ( ).

To move or copy files to a folder, press and at the

same time to mark a file, and select Options > Move to

folder or Copy to folder.

Icons in File mgr.:

Folder

Folder that has a subfolder

Your phone

To find a file, select Options > Find and the memory from

which to search, and enter a search text that matches the

file name.

Tip! You can use Nokia Phone Browser available in

Nokia PC Suite to view the different memories in your

phone. See the CD-ROM supplied in the sales package.

View memory consumption

To view what types of data

you have in the phone and

how much memory the

different data types consume,

select Options > Memory

details. Scroll down to Free

memory to view the amount

of free memory in the phone.

To view the amount of free

memory on the memory card,

if you have a card inserted in

the phone, press to open the memory card view, and

select Options > Memory details.

Memory low—free memory

The phone notifies you if the phone memory or memory

card memory is getting low.

To free phone memory, transfer data to a memory card in

the file manager. Mark files to be moved, select Move to

folder > Memory card, and a folder.

Tip! To free memory from the phone or from the

memory card, use Image Store available in Nokia PC

Suite to transfer images and video clips to a

compatible PC. See the CD-ROM supplied in the sales

package.

To remove data to free memory, use File mgr., or go to the

respective application. For example, you can remove the

following:

• Messages from Inbox, Drafts, and Sent folders in

Messaging

• Retrieved e-mail messages from the phone memory

• Saved Web pages

• Saved images, videos, or sound files

• Contact information

• Calendar notes

• Downloaded applications. See also ‘Application

manager’, p. 115.

• Any other data that you no longer need

Memory card tool

Your phone

Note: This device uses a Reduced Size Dual Voltage

(1.8/3V) MultiMediaCard (MMC). To ensure

interoperability, use only dual voltage MMCs. Check the

compatibility of an MMC with its manufacturer or

provider.

Use only compatible Multimedia cards (MMC) with this

device. Other memory cards, such as Secure Digital (SD)

cards, do not fit in the MMC card slot and are not

compatible with this device. Using an incompatible

memory card may damage the memory card as well as the

device, and data stored on the incompatible card may be

corrupted.

Keep all memory cards out of the reach of small children.

Press , and select Tools > Memory. You can use a

memory card as extra storage space. It is also good to

regularly back up the information in the phone memory to

the memory card. The information can be restored to the

phone later. See ‘Inserting the memory card’ in the Quick

start guide.

You cannot use the memory card if the door of the

memory card slot is open.

Important: Do not remove the MMC card in the

middle of an operation when the card is being accessed.

Removing the card in the middle of an operation may

damage the memory card as well as the device, and data

stored on the card may be corrupted.

To back up information from phone memory to a memory

card, select Options > Backup phone mem.

To restore information from the memory card to the phone

memory, select Options > Restore from card.

Tip! To rename a memory card, select Options >

Memory card name.

Format a memory card

When a memory card is formatted, all data on the card is

permanently lost.

Some memory cards are supplied pre-formatted and others

require formatting. Consult your retailer to find out if you

must format the memory card before you can use it.

To format a memory card, select Options > Format mem.

card. Select Yes to confirm. When formatting is complete,

enter a name for the memory card, and select OK.

Make calls

Voice calls

Tip! To increase or decrease the volume during a call,

press or . If you have set the volume to Mute,

you cannot adjust the volume with the scroll key. To

adjust the volume, select Unmute, and then press

or .

1In the standby mode, enter the phone number,

including the area code. Press to remove a number.

For international calls, press twice for the +

character (replaces the international access code), and

enter the country code, area code (omit the leading

zero if necessary), and phone number.

2Press to call the number.

3Press to end the call (or to cancel the call attempt).

Pressing always ends a call, even if another

application is active.

To make a call from Contacts, press , and select

Contacts. Scroll to the desired name; or enter the first

letters of the name to the search field. Matching contacts

are listed. Press to call. Select the call type Voice call.

To call your voice mailbox ( ), press and hold in the

standby mode. See also ‘Call forwarding’, p. 113.

Tip! To change the phone number of your voice

mailbox, press , and select Tools > Voice mail >

Options > Change number. Enter the number

(obtained from your service provider), and select OK.

To call a recently dialed number in the standby mode,

press to access a list of the 20 last numbers you called

or attempted to call. Scroll to the number you want, and

press to call the number.

Make a conference call

1Make a call to the first participant.

2To make a call to another participant, select Options >

New call. The first call is automatically put on hold.

3When the new call is answered, to join the first

participant in the conference call, select Options >

Conference.

To add a new person to the call, repeat step 2, and

select Options > Conference > Add to conference.

The phone supports conference calls between a

maximum of six participants, including yourself.

To have a private conversation with one of the

participants, select Options > Conference > Private.

Select a participant, and select Private. The conference

call is put on hold on your phone. The other

Make calls

participants can still continue the conference call.

Once you have finished the private conversation,

select Options > Add to conference to return to the

conference call.

To drop a participant, select Options > Conference>

Drop participant, scroll to the participant, and select

Drop.

4To end the active conference call, press .

1-touch dial a phone number

To activate 1-touch dialing, press , and select Tools>

Settings > Call > 1-touch dialing > On.

To assign a phone number to one of the 1-touch dialing

keys ( — ), press , and select Tools > 1-touch.

Scroll to the key to which you want to assign the phone

number, and select Options > Assign. is reserved for

the voice mailbox.

To call in the standby mode, press the 1-touch dial key

and .

Voice dialing

Your phone supports enhanced voice commands.

Enhanced voice commands are not dependent on the

speaker’s voice, so the user does not record voice tags in

advance. Instead, the phone creates a voice tag for the

entries in contacts, and compares the spoken voice tag to

it. The voice recognition in the phone adapts to the main

user’s voice to recognise the voice commands better.

The voice tag for a contact is the name or nickname that is

saved on the contact card. To listen to the synthesised

voice tag, open a contact card, and select Options > Play

voice tag.

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy

environment or during an emergency, so you should not

rely solely upon voice dialing in all circumstances.

When you use voice dialing, the loudspeaker is in use. Hold

the phone at a short distance away when you say the voice

tag.

1To start voice dialdialing, press and hold the capture

key. If you are using a compatible headset with the

headset key, press and hold the headset key to start

voice dialing.

2A short tone is played, and Speak now is displayed. Say

clearly the name or nickname that is saved on the

contact card.

3The phone plays a synthesised voice tag for the

recognised contact in the selected phone language, and

displays the name and number. After a time-out of 1.5

seconds, the phone dials the number.

Make calls

If the recognised contact was not correct, select

#Other to view a list of other matches, or Quit to

cancel voice dialing.

If several numbers are saved under the name, the phone

selects the default number, if it has been set. Otherwise

the phone selects the first available number of the

following: Mobile, Mobile (home), Mobile (work),

Telephone, Tel. (home), and Tel. (work).

Video calls

When you make a video call, you can see a real-time,

two-way video between you and the recipient of the call.

The live video image, or video image captured by the

camera in your phone is shown to the video call recipient.

To be able to make a video call, you must have a USIM card

and be in the coverage of a UMTS network. For availability

of and subscription to video call services, contact your

network operator or service provider. A video call can only

be made between two parties. The video call can be made

to a compatible mobile phone or an ISDN client. Video calls

cannot be made while there is another voice, video, or data

call active.

Warning! You cannot make emergency calls in the

Imaging mode because the keypad is not active. To make

an emergency call, activate the Fold open mode.

Icons:

You are not receiving video (the recipient is not

sending video or the network is not transmitting it).

You have denied video sending from your phone. To

send a still image instead, see ‘Call settings’, p. 106.

1To start a video call, in the

Fold open mode, enter the

phone number in the

standby mode, or select

Contacts, and select a

contact.

2Select Options > Call >

Video call.

3Activate the Imaging mode

after the call recipient has

answered the call.

Starting a video call may take a while. Waiting for image

is shown. If the call is not successful (for example, video

calls are not supported by the network, or the receiving

device is not compatible) you are asked if you want to try

a normal call or send a message instead.

The video call is active when you see two video images,

and hear the sound through the loudspeaker. The call

recipient may deny video sending ( ), in which case you

hear the sound and may see a still image or a grey

background graphic.

Make calls

Tip! To increase or decrease the volume during a call,

in the Fold open mode, press or , or in the

Imaging mode, move the joystick left or right.

To change between showing video or hearing only sound,

select Enable/Disable > Sending video (Imaging mode

only), Sending audio or Sending audio & video (Imaging

mode only).

To send live video image of yourself, turn the camera unit

so that the lens is facing you.

To zoom your own image, select Zoom in or Zoom out.

The zoom indicator is shown on the top of the display.

To switch the places of the sent video images on the

display, select Change image order.

If you activate the Fold open mode during a video call,

sending your own video image stops because the camera

is not active. You can, however, still see the video of the

recipient.

Note: Even if you have denied video sending during

a video call, the call will still be charged as a video call.

Check the pricing with your network operator or

service provider.

To end the video call, press .

Video sharing

Use Video sharing to send live video or a video clip from

your mobile device to another compatible mobile device

during a voice call. Simply invite a recipient to view the live

video, or a video clip you want to share, and activate the

Imaging mode. See ‘Imaging mode’, p. 20. Sharing begins

automatically when the recipient accepts the invitation.

The loudspeaker is active when you activate the Imaging

mode. You can also use a headset to continue your voice

call while you share video. When a voice call is active,

select Options > Video sharing > Live or Clip. Send an

invitation to the recipient, and activate the Imaging mode

to begin sharing.

To stop Video sharing, return to the Fold open mode. Your

voice call continues normally.

Video sharing requirements

Because Video sharing requires a 3G Universal Mobile

Telecommunications System (UMTS) connection, your

ability to use Video sharing depends on 3G network

availability. Contact your service provider for questions

about network availability and fees associated with using

this application. To use Video sharing you must:

• Ensure that Video sharing is installed on your Nokia

phone.

Make calls

• Ensure that your phone is set up for person-to-person

connections. See ‘Settings’, p.31.

• Ensure you have an active UMTS connection and are

within UMTS network coverage. See ‘Settings’, p. 31. If

you start the sharing session while you are within

UMTS network coverage and a handover to GSM

occurs, the sharing session is discontinued, but your

voice call continues. If you try to start Video sharing

when you are not within UMTS network coverage (for

example, in a GSM network), a message is displayed

that there is no 3G network coverage (the registration

cannot be made).

• Ensure that both the sender and recipient are

registered to the UTMS network. If you invite someone

to a sharing session and that person has his phone

turned off, is not within UMTS network coverage, or

their registration mode is When needed and they have

not started Video sharing, they do not know that you

are sending an invitation. However, you receive an error

message that the recipient cannot accept the

invitation.

Settings

Person-to-person connection settings

A person-to-person connection is also known as a Session

Initiation Protocol (SIP) connection. The SIP profile settings

must be configured in your phone before you can use

Video sharing. Setting up a SIP profile allows you to

establish a live person-to-person connection to another

compatible phone. The SIP profile must also be established

to receive a sharing session.

Ask your network operator or service provider for the SIP

profile settings, and save them in your phone. Your

network operator or service provider may send you the

settings over the air or give you a list of the needed

parameters.

If you know a recipient’s SIP address, you can enter it on

your contact card for that person. Open Contacts from

your phone main menu, and open the contact card (or

start a new card for that person). Select Options >Add

detail > Web address. Enter the SIP address in a format

sip:username@domainname (you can use an IP address

instead of a domain name).

UTMS connection settings

To set up your UMTS connection, do the following:

• Contact your service provider to establish an

agreement for you to use the UMTS network.

• Ensure that your phone UMTS access point connection

settings are configured properly. For help, see

‘Connection settings’, p. 107.

Make calls

Share live video

To receive a sharing session, the recipient must install

Video sharing and configure the required settings on

their mobile device. You and the recipient must both be

registered to the service before you can start sharing. You

can see the registration status in the Video sharing main

view.

To receive share invitations even when Video sharing is

closed, set the registration mode for the SIP settings to

Always on. If the registration mode is When needed, you

must start Video sharing before you can receive an

invitation.

1Select Options > Video sharing > Live or Clip. Wait

until Registered to service is displayed.

The Invitation window opens.

If you selected Clip, a list of video clips opens. Select a

video clip you want to share, and select Options >

Send invitation.

2Select the SIP address of the recipient to which you

want to send the invitation from the contacts list.

If the SIP address of the recipient is not available,

enter a SIP address.

3Select OK to send the invitation. Sharing begins

automatically when the recipient accepts the

invitation, and you activate the Imaging mode.

4Select Pause to pause the sharing session. Select

Continue to resume sharing.

5To end the sharing session, return to the Fold open

mode. To end the voice call, press the End key.

Accept an invitation

When someone sends you a share invitation, an invitation

message is displayed showing the sender’s name or SIP

address. If your phone is not set to Silent, it rings when you

receive an invitation.

If someone sends you a share invitation and your phone is

turned off, you are not within UMTS network coverage, or

your registration mode is When needed and you have not

started Video sharing, you will not know that you received

an invitation.

When you receive an invitation, you can select:

•Mute to stop any audible alerts triggered by the

invitation message.

•Accept, and activate the Imaging mode to begin the

sharing session.

•Mute and then Reject to decline the invitation. The

sender receives a message that you rejected the

invitation. You can also press the End key to decline the

sharing session and disconnect the voice call.

To disconnect the session, return to the Fold open mode.

Sharing ended is displayed.

Make calls

Answer or reject a call

To answer the call in the Fold open mode, press . In the

Fold closed mode, open the fold, and the call starts

automatically. To answer a call, and use the loudspeaker in

the Fold closed mode, select Answer ().

To mute the ringing tone when a call comes in, select

Silence.

Tip! If a compatible headset is connected to the

phone, to answer and end a call, press the headset key.

If you do not want to answer a call, press to reject it.

The caller hears a line busy tone. If you have activated the

Call forward settings > If busy function to forward calls,

rejecting an incoming call also forwards the call. See ‘Call

forwarding’, p. 113.

When you reject an incoming call, you can also send a text

message to the caller informing why you cannot answer

the call. Select Options > Send text message. You can edit

the text before sending it. See also Reject call with SMS,

p. 106.

If you answer a voice call during a video call, the video call

is dropped. Call waiting is not available during a video call.

Answer or reject a video call

When a video call arrives, is displayed.

Tip! You can assign a ringing tone for video calls.

Press and select Profiles.

In the Fold open mode, press to answer the video call.

To start sending video, activate the Imaging mode, and a

live video image, recorded video clip, or the image being

captured by the camera in your phone is shown to the

caller. If you want to send a live video image, turn the

camera unit to the direction from which you want to send

the video image. If you do not activate the Imaging mode,

video sending is not activated, and you hear a sound. A

grey screen is shown in place of the video. To replace the

grey screen with a still image, see ‘Call settings’, Image in

video call, p. 106.

Tip! To send video of yourself, in the Imaging mode

turn the camera unit so that the lens is facing you.

If you activate the Fold open mode during a video call,

sending your own video image stops because the camera

is not active. You can, however, still see the video of the

recipient.

Note: Even if you have denied video sending during

a video call, the call will still be charged as a video call.

Check the pricing with your network operator or

service provider.

To end the video call, in the Imaging mode or in the Fold

open mode, press .

Make calls

Call waiting

You can answer a call while you have another call in

progress if you have activated Call waiting in Tools >

Settings > Call > Call waiting.

Tip! To change the phone tones for different

environments and events, for example, when you want

your phone to be silent, see ‘Profiles—Set tones’, p. 15.

To answer the waiting call, press . The first call is put

on hold.

To switch between the two calls, select Swap. Select

Options > Transfer to connect an incoming call or a call

on hold with an active call and to disconnect yourself

from the calls. To end the active call, press . To end

both calls, select Options > End all calls.

Options during a voice call

Many of the options that you can use during a voice call

are network services. Select Options during a call for

some of the following options: Mute or Unmute, Answer,

Decline, Swap, Hold or Unhold, Activate handset,

Activate loudsp., or Activate handsfree (if a compatible

headset with Bluetooth connectivity is attached), End

active call or End all calls, New call, Conference, and

Transfer. Select from the following:

Replace—To end an active call and replace it by answering

the waiting call.

Send MMS (in UMTS networks only)—To send an image or

a video in a multimedia message to the other participant

of the call. You can edit the message and change the

recipient before sending. Press to send the file to a

compatible device ( ).

Send touch tones—To send DTMF tone strings, for

example, a password. Enter the DTMF string or search for

it in Contacts. To enter a wait character (w) or a pause

character (p), press repeatedly. Select OK to send the

tone.

Tip! You can add DTMF tones to the Phone number

or Touch tones fields in a contact card.

Options during a video call

Select Options during a video call for the following

options: Hold or Disable (audio in the Fold open mode;

video, audio, or both in the Imaging mode), Activate

handset (if a headset with Bluetooth connectivity is

attached), Activate loudsp., or Activate handsfree (Fold

open mode only, and if a headset with Bluetooth

connectivity is attached), End active call, Change image

order, Zoom in/Zoom out (Imaging mode only), and Help.

Make calls

Log

Recent calls

To monitor the phone numbers of missed, received, and

dialed calls, press , and select My own > Log > Recent

calls. The phone registers missed and received calls only if

the network supports these functions, the phone is

switched on, and within the network service area.

Tip! When you see a note in the standby mode about

missed calls, select Show to access the list of missed

calls. To call back, scroll to a name or number, and press

To clear all recent call lists, select Options > Clear recent

calls in the recent calls main view. To clear one of the call

registers, open the register you want to erase, and select

Options > Clear list. To clear an individual event, open a

Call timers

To monitor the approximate duration of your incoming and

outgoing calls, press , and select My own > Log > Call

timers.

Note: The actual time invoiced for calls by your

service provider may vary, depending on network

features, rounding off for billing, and so forth.

To clear call duration timers, select Options > Clear

timers. For this you need the lock code, see ‘Security’,

‘Phone and SIM’, p. 110.

Packet data

To check the amount of data sent and received during

packet data connections, press , and select My own >

Log > Packet data. For example, you may be charged for

your packet data connections by the amount of data sent

and received.

Monitor all communication events

Icons in Log:

Incoming

Outgoing

Missed communication events

Make calls

To monitor all voice and video

calls, text messages, or data

connections registered by the

phone, press , select My

own > Log, and press the scroll

key to the right to open the

general log. For each

communication event, you can

see the sender or recipient

name, phone number, name of

the service provider, or access

point. You can filter the general log to view just one type

of event and create new contact cards based on the log

information.

Tip! If you want to see the duration of a voice call on

the main display during an active call, select Options

> Settings > Show call duration > Yes.

Tip! To view a list of sent messages, press , and

select Messaging > Sent.

Sub events, such as a text message sent in more than one

part and packet data connections, are logged as one

communication event. Connections to your mailbox,

multimedia messaging centre, or Web pages are shown as

packet data connections.

To filter the log, select Options > Filter and a filter.

To erase the contents of the log, recent calls register, and

messaging delivery reports permanently, select Options>

Clear log. Select Yes to confirm.

To set the Log duration, select Options > Settings > Log

duration. The log events remain in the phone memory for

a set number of days after which they are automatically

erased to free memory. If you select No log, all the log

contents, recent calls register, and messaging delivery

reports are permanently deleted.

To view the details of a communication event, in the

general log view scroll to an event, and press the scroll key.

Tip! In the details view you can copy a phone number

to the clipboard, and paste it to a text message, for

example. Select Options > Copy Number.

Packet data counter and connection timer: To view how

much data, measured in kilobytes, is transferred and how

long a certain packet data connection lasts, scroll to an

incoming or outgoing event indicated by Pack., and select

Options > View details.

Contacts (Phonebook)

Press , and select Contacts. In Contacts you can add a

personal ringing tone or a thumbnail image to a contact

card. You can also create contact groups, which allow you

to send text messages or e-mail to many recipients at the

same time. You can add received contact information

(business cards) to contacts. See ‘Data and settings’, p. 69.

Contact information can only be sent to or received from

compatible devices.

Tip! Regularly back up the phone information to the

memory card. You can restore the information, such as

contacts, to the phone later. See ‘Memory card tool’, p.

25. You can also use Nokia PC Suite to back up your

contacts to a compatible PC. See the CD-ROM supplied

with your phone.

Options in Contacts are Open, Call, Create

message, New contact, Open conversation, Edit,

Delete, Duplicate, Add to group, Belongs to groups,

Mark/Unmark, Copy/Copy to SIM direct., SIM

contacts, Go to web address, Send, Memory details,

Settings, Help, and Exit.

Save names and numbers

1Select Options > New contact.

2Fill in the fields that you want, and select Done.

Tip! If you use video sharing with a contact,

save the contact’s session initiation protocol (SIP)

address to the Web address field of the contact

card. Enter the SIP address in the format

sip:username@domainname (you can use an IP

address instead of a domain name).

To edit contact cards in Contacts, scroll to the contact

card you want to edit, and select Options > Edit.

To delete a contact card in Contacts, select a card, and

press . To delete several contact cards at the same time,

press and to mark the contacts, and press to

delete.

Tip! To add and edit contact cards, use Nokia

Contacts Editor available in Nokia PC Suite. See the

CD-ROM supplied with your phone.

To attach a small thumbnail image to a contact card, open

the contact card, and select Options > Edit > Options >

Add thumbnail. The thumbnail image is shown when the

contact calls.

Contacts (Phonebook)

Tip! 1-touch dialing is a quick way to call frequently

used numbers. You can assign 1-touch dialing keys to

eight phone numbers. See ‘1-touch dial a phone

number’, p. 28.

Tip! To send contact information, select the card you

want to send. Select Options > Send > Via text

message, Via multimedia, or Via Bluetooth. See

‘Messaging’, p. 63 and ‘Send data using a Bluetooth

connection’, p. 98.

Default numbers and addresses

You can assign default numbers or addresses to a contact

card. In this way if a contact has several numbers or

addresses, you can easily call or send a message to the

contact to a certain number or address. The default

number is also used in voice dialing.

1In contacts, select a contact, and press .

2Select Options > Defaults.

3Select a default to which you want to add a number or

an address, and select Assign.

4Select a number or an address you want to set as a

default.

The default number or address is underlined in the contact

card.

Copy contacts

To copy names and numbers from a SIM card to your

phone, press , and select Contacts > Options > SIM

contacts > SIM directory. Select the names you want to

copy and Options > Copy to Contacts.

To copy contacts to your SIM card, press , and select

Contacts. Select the names you want to copy and

Options > Copy to SIM direct., or Options > Copy > To

SIM directory. Only the contact card fields supported by

your SIM card are copied.

Tip! You can synchronize your contacts to a

compatible PC with Nokia PC Suite. See the CD-ROM

supplied with your phone.

SIM directory and other SIM services

For availability and information on using SIM card services,

contact your SIM card vendor. This may be the service

provider, network operator, or other vendor.

Press , and select Contacts > Options > SIM

contacts > SIM directory to see the names and numbers

stored on the SIM card. In the SIM directory you can add,

edit, or copy numbers to contacts, and you can make calls.

Contacts (Phonebook)

To view the list of fixed dialing numbers, select Options >

SIM contacts > Fixed dialing contacts. This setting is

only shown if supported by your SIM card.

To restrict calls from your phone to selected phone

numbers, select Options > Activ. fixed dialing. To add

new numbers to the fixed dialing list, select Options >

New SIM contact. You need the PIN2 code for these

functions.

When you use Fixed dialing, packet data connections are

not possible, except when sending text messages over a

packet data connection. In this case, the message centre

number and the recipient’s phone number must be

included on the fixed dialing list.

When fixed dialing is activated, calls still may be possible

to the official emergency number programmed into your

device.

Add ringing tones for contacts

When a contact or group member calls you, the phone

plays the chosen ringing tone (if the caller’s telephone

number is sent with the call and your phone recognizes it).

1Press to open a contact card, or go to the groups

list, and select a contact group.

2Select Options > Ringing tone. A list of ringing tones

opens.

3Select the ringing tone you wish to use for the

individual contact or the selected group.

To remove the ringing tone, select Default tone from the

list of ringing tones.

Create contact groups

Options in the groups list view are Open, New group,

Delete, Rename, Ringing tone, Memory details,

Settings, Help, and Exit.

1In Contacts, press to open the groups list.

2Select Options > New group.

3Write a name for the group or use the default name

Group %N, and select OK.

4Open the group, and select Options > Add members.

5Scroll to a contact, and press to mark it. To add

multiple members at a time, repeat this action on all

the contacts you want to add.

6Select OK to add the contacts to the group.

To rename a group, select Options > Rename, enter the

new name, and select OK.

Remove members from a group

1In the groups list, open the group you want to modify.

2Scroll to the contact, and select Options > Remove

from group.

Contacts (Phonebook)

3Select Yes to remove the contact from the group.

Tip! To check to which groups a contact belongs,

scroll to the contact, and select Options > Belongs to

groups.

Camera and Gallery

Camera

The Nokia XXXX device supports an image capture

resolution of 1600 x 1200 pixels. The image resolution in

these materials may appear different.

To activate the camera,

activate the Imaging mode.

See ‘Imaging mode’, p.20.

The camera starts, and you

can see the view to be

captured.

Warning! You

cannot make emergency

calls in the Imaging mode

because the keypad is not

active. To make an

emergency call, activate the Fold open mode.

If the camera is in Video mode, open the image mode by

selecting Options > Image mode.

The images are automatically saved in the gallery in .jpeg

format. You can send images in a multimedia message as

an e-mail attachment or using a Bluetooth connection.

Take pictures in the Imaging mode

To make lighting and color adjustments before taking a

picture, select Options > Image setup > Scene, Flash,

White balance, Exposure value, or Color tone. See ‘Setup

settings—Adjust color and lighting’, p. 44.

To select a scene, select Options> Image setup > Scene.

See ‘Scenes’, p. 45.

Your phone also has a swing axis camera, which makes

capturing views in different situations easier. You can turn

the camera unit clockwise and counterclockwise. See

‘Camera mode’, p. 20.

Options before taking a picture are Video mode, Go

to Gallery, Image setup, Sequence mode/Normal

mode, Self-timer, Settings, and Help.

To lock the focus on an object, press the capture key

halfway down. The green locked focus indicator appears

on the display. If the focus was not locked, the red locked

focus indicator appears. Release the capture key, and press

it again halfway down. You can, however, take the picture

without locking the focus.

To take a picture, press the capture key. Do not move the

phone before the image is saved. The image is saved

Camera and Gallery

automatically in the Images & videofolder of Gallery. See

‘Gallery’, p. 53.

Tip! You can also take pictures conveniently in the

Camera mode. See ‘Take pictures in the Camera mode’,

p. 46.

Imaging mode camera indicators show the following:

• The phone memory ( ) and memory card ( )

indicators (1) show where images are saved.

• The images indicator (2) estimates how many images,

depending on the selected image quality, can fit in the

remaining memory of your phone or the memory card.

• The scene indicator (3) shows the active scene. See

‘Scenes’,p. 45.

• The flash indicator (4)

shows if the flash is set to

Automatic (), Red

eye redu. (), On

(), or Off ().

• The green focus indicator

(5) is displayed when the

focus point is locked by

the viewfinder.

• The self-timer indicator

(6) shows that the

self-timer is activated.

See ‘You in the picture—self-timer’, p. 43.

• The sequence mode indicator (7) shows that the

sequence mode is active. See ‘Take pictures in a

sequence’, p. 43.

Shortcuts are as follows:

• Press the joystick up and down to zoom in and zoom

out. The zoom indicator, which appears on the side

pane, shows the zoom level.

• Press the joystick to enter the Image setup settings.

See ‘Setup settings—Adjust color and lighting’, p. 44.

• Press the joystick left or right to change the flash mode.

Saving the captured image may take longer if you change

the zoom, lighting, or color settings.

When taking a picture, note the following:

• It is recommended to use both hands to keep the

camera still.

• To take images or record video in different

environments, use the proper scene for each

environment. See ‘Scenes’, p. 45.

• To make lighting and color adjustments before taking a

picture, select Options > Image setup > Scene, Flash,

White balance, Exposure value, or Color tone. See

‘Setup settings—Adjust color and lighting’, p. 44.

• The quality of a zoomed picture is lower than that of a

non zoomed picture.

Camera and Gallery

• The camera goes into battery saving mode if there are

no key presses in a while. To continue taking pictures,

press the capture key.

After the image is taken, note the following:

• If you do not want to keep the image, select Options >

Delete.

• To return to the viewfinder to take a new picture, press

the capture key halfway down.

•To send the image Via multimedia, Via e-mail, or Via

Bluetooth, select Options > Send. For more

information, see ‘Messaging’, p. 63 and ‘Bluetooth

connection’, p. 97. This option is not available during an

active call.

• To send an image to the other party during an active

call, select Options > Send to caller.

• To edit the picture, select Options > Edit. See ‘Edit

images’, p. 48.

• To print the picture, select Options > Print. See ‘Image

print’, p. 57.

Take pictures in a sequence

Select Options > Sequence

mode to set the camera to

take six pictures in a

sequence. You can also use

the sequence mode with the

Self-timer. See ‘You in the

picture—self-timer’, p. 43.

The pictures are

automatically saved in

Gallery.

After taking the pictures,

they are shown in a grid on the main display. To view a

picture, press the joystick to open it.

To return to the sequence mode viewfinder, press the

capture key halfway down.

You in the picture—self-timer

Use the self-timer to delay the taking of a picture so that

you can include yourself in the picture. To set the

self-timer delay, select Options > Self-timer > 2 seconds

or 10 seconds. To activate the self-timer, select Activate.

The self-timer indicator ( ) blinks and the phone beeps

when the timer is running. The camera takes the picture

after the selected delay has elapsed. You can also use the

Self-timer in the sequence mode. See ‘Take pictures in a

sequence’, p. 43.

Camera and Gallery

Tip! Select Options > Self-timer > 2 seconds to

keep your hand steady when taking a picture.

Flashlight

Keep a safe distance when using the flash. Do not use the

flash on people or animals at close range. Do not cover the

flash while taking a picture.

The camera has an LED flashlight for low light conditions.

The following flashlight modes are available: Automatic

()

, Red eye redu. (), On (), and Off ().

Select Options > Image setup > Flash > On to use the

flashlight.

If the flashlight is set to Off or Automatic during bright

conditions, the flashlight still emits a low light when an

image is captured. This allows the subject of the picture

to see when the picture is taken. There is no flashlight

effect on the resultant picture.

If the flashlight is set to Red eye redu., it decreases the

redness of the eyes in the picture.

Setup settings—Adjust color and lighting

To enable the camera to

reproduce colors and lighting

more accurately, or to add

effects to your pictures or

videos, select Options >

Image setup or Video setup,

and select from the following

options:

Scene—Select a proper scene

for the environment in which

you are taking pictures. See

‘Scenes’, p. 45. Every scene uses its own lighting settings

that have been adjusted according to a certain kind of

environment.

Flash (images only)—Set the flash to Automatic, Red eye

redu., On, or Off. See ‘Flashlight’, p. 44.

White balance—Select the current lighting condition from

the list. This allows the camera to reproduce colors more

accurately.

Exposure value (images only)—Adjust the exposure time of

the camera.

Color tone—Select a color effect from the list.

The screen display changes to match any settings made,

showing you how the change affects the pictures or videos.

Camera and Gallery

The settings return to the default settings when you close

the camera. If you select a new scene, the settings are

replaced by the settings of the selected scene. See ‘Scenes’,

p. 45. If you, however, need to change the setup settings,

you can change them after selecting a scene.

Scenes

A scene helps you to find the right color and lighting

settings for the current environment. Select a proper scene

for taking pictures or recording video clips from a scenes

list. The settings of each scene have been set according to

a certain style, or environment in which the pictures are

taken. Select Options > Image setup/Video setup >

Scene:

Video scenes

Normal (default)—Use this scene in all conditions.

Night—Use this scene in low light conditions. The night

mode is indicated with .

Image scenes

Automatic (default)—Use this scene in all conditions.

User defined—Use this scene to create a personalized

scene with your own flash, white balance, exposure value,

and color tone settings.

Close-up mode—Use this scene for close up photography.

Portrait—Use this scene to take portrait pictures, such as

head shots and sitting poses.

Landscape—Use this scene

when you take pictures of

objects that are further

away.

Night—Use this scene in low

light conditions. The night

mode is indicated with .

Sports—Use this scene to

take pictures of fast moving

objects. Note that when you use this scene, the resolution

of the images is reduced from 1600x1200 to 800x600. See

Image quality, 46.

When taking pictures, the default scene is Automatic. If

you, however, select the User defined scene, it is set as

the default scene.

To make your own scene suitable for a certain

environment, select User defined scene. In the user scene

you can adjust Based on scene, Flash, White balance,

Exposure value, Color tone, and Reset user scene

options. To copy the settings of another scene, select

Based on scene and the desired scene.

Camera and Gallery

Adjust still image camera settings

There are two kinds of settings for the still image camera

in the Imaging mode: Image setup settings and main

settings. To adjust Image setup settings, see ‘Setup

settings—Adjust color and lighting’, p. 44. The setup

settings return to the default settings after you close the

camera, but the main settings remain the same until you

change them again. To change the main settings, select

Options > Settings and from the following:

Image quality—High-Print (resolution 1600x1200),

Med.-Email (resolution 800x600), or Low-Multimedia

(resolution 640x480). The better the image quality, the

more memory the image consumes. The quality of a

zoomed picture is lower than that of a non zoomed

picture. If you want to print the image, select High-Print.

If you want to send it through e-mail, select Med.-Email.

To send the image through MMS, select Low-Multimedia.

Add to album—Select whether you want to save the

image to a certain album in the gallery. If you select Yes,

a list of available albums opens.

Show focus point (image only)—Select Yes if you want

the focus point to be visible on the main display when

taking a picture.

Show captured image—Select Yes if you want to see the

captured image after it is taken, or No if you want to

continue taking pictures immediately.

Memory in use—Select where to store your images.

Take pictures in the Camera mode

The camera in the Camera mode can be activated and used

also during an active call.

1To activate the

Camera mode, turn

the camera unit in the

Fold closed mode. See

‘Fold closed mode’, p.

19. The active keypad

lock is deactivated,

and the viewfinder

appears on the cover

display.

To zoom in or zoom out, move the joystick to the right

or to the left.

2To lock the focus on an object, press the capture key

halfway down. The green locked focus indicator

appears on the display. If the focus was not locked, the

red locked focus indicator appears. Release the capture

key, and press it again halfway down. You can,

however, take the picture without locking the focus.

3To take the picture, press the capture key all the way

down. The picture is automatically saved in the gallery.

See ‘Gallery’, p. 53.

Camera and Gallery

To keep the image on the display after taking it, hold the

capture key down. To return to the viewfinder, release the

capture key.

Camera mode indicators show the following:

• The mode indicator (1)

shows the active scene.

See ‘Scenes’, p. 45.

• The phone memory ( )

and memory card ( )

indicators (2) show where

images are saved.

• The images indicator (3)

estimates how many

images, depending on the

selected image quality,

can fit in the remaining

memory of your phone or the memory card.

• The green focus indicator (4) is displayed when the

focus point is locked by the viewfinder.

• The self-timer indicator (5) shows that the self-timer is

activated. See ‘You in the picture—self-timer’, p. 43.

• The flash indicator (6) shows if the flash is set to

Automatic ()

, Red eye redu. (), On (), or Off

( ). Select between the flash modes by moving the

joystick up or down. You can see the flash mode in the

pop-up window on the display.

• The zoom indicator (7) shows the zoom level. Move the

joystick left and right to zoom in and zoom out.

• The joystick indicator ( ) (8) indicates that the

Options menu is available. Press the joystick to open

the Options menu.

To close the camera in the Camera mode, return to the

Fold closed mode by turning the camera unit. See ‘Fold

closed mode’, p. 19.

Camera mode options

To adjust the image settings, press the joystick, and select

from the following options:

Set scene—To select a proper scene for the image

capturing environment. See ‘Scenes’, p. 45.

Flip view—To flip the picture 180 degrees. You need this

option when you take a picture, for example, of yourself;

when you turn the camera unit so that it is facing you, the

viewfinder is upside down.

Self-timer—To activate the self-timer. Select 2 seconds

or 10 seconds.

Exposure value—To adjust the brightness of the picture.

Settings—To adjust the Image quality, Memory in use,

and Show captured img. settings. See ‘Adjust still image

camera settings’, p. 46.

Camera and Gallery

Edit images

To edit the pictures after taking them, or the ones already

saved in Gallery, select Options > Edit. You can open the

Gallery application in the Imaging mode or in the Fold

open mode.

Options in the edit main view are Apply effect,

Undo,Send, Full screen/Normal screen, Zoom in/

Zoom out, Save, Print,Help, and Close edit.

Select Apply effect to, for example, crop and rotate the

image; adjust the brightness, color, contrast, compression,

and resolution; and add effects, text, clip art, or a frame

to the picture.

To crop an image, select Options > Apply effect > Crop.

A cross appears on the upper left corner of the image. To

move the cross, and select the area to be cropped, move

the joystick. Select Set. Another cross appears on the

lower right corner. Select again the area to be cropped,

and select Crop. The selected areas form cropped image.

To reduce redness of the eyes in an image, select

Options > Apply effect > Red eye reduction. Move the

cross onto the eye, and press the joystick. A loop appears

on the display. To resize the loop to fit the size of the eye,

move the joystick. Press the joystick to reduce the redness.

To add clip art to an image, select Options > Apply

effect > Clip art. Select the item you want to add from

the list, and press the joystick. To move, rotate, and change

the size of the item, select Options > Move, Resize, or

Rotate.

To add text to an image, select Options > Apply effect >

Text. Enter the text, and select OK. To edit the text, select

Options > Move, Resize, Rotate, or Colour.

Shortcuts in the image editor:

• To view an image in full screen, press . To return to

the normal view, press again.

• To rotate an image clockwise or counterclockwise,

press and .

• To zoom in or zoom out, press and .

Tips on taking good photographs

By turning the swing axis camera, capturing the views in

demanding situations is easier. You can turn the camera

unit clockwise or counterclockwise. See ‘Camera mode’, p.

20.

Picture quality

Use the appropriate picture quality. The camera has

three picture quality modes (High-Print, Med.-Email, and

Low-MMS). Use the High-Print setting to make sure that

the camera produces the best picture quality available.

Note however, that better picture quality requires more

storage space. For MMS and e-mail attachments it may be

Camera and Gallery

necessary to use the Med.-Email or Low-MMS setting. To

define the quality in the image mode in the camera, select

Options > Settings.

Background

Use a simple background. For portraits and other pictures

with people, avoid having your subject in front of a

cluttered, complex background that may distract attention

from the subject. Move the camera, or the subject, when

these conditions cannot be met. Move the camera closer to

the object to take clearer portraits.

Depth

When shooting landscapes and sceneries, add depth to

your pictures by placing objects into the foreground. Note

however, that if the foreground object is too close to

camera, it may be blurred.

Lighting conditions

Changing the source, amount, and direction of light can

change photographs dramatically. Here are some typical

lighting conditions:

•Light source behind the subject. Avoid placing your

subject in front of a strong light source. If the light

source is behind the subject or visible in the display, the

resulting picture may have weak contrast, may be too

dark, and may contain unwanted light effects. You can

also use the flashlight to add more lighting to

shadows. See ‘Flashlight’, p. 44.

•Sidelit subject. Strong side light gives a dramatic

effect but may be too harsh, resulting in too much

contrast.

•Light source in front of the subject. Harsh sunlight

may cause the subjects to squint their eyes. The

contrast may also be too high.

•Optimal lighting is found in situations where there is

plenty of diffused, soft light available, for example, on

a bright, partially cloudy day or on a sunny day in the

shadow of trees.

Record videos

To activate the camera and the viewfinder on the main

display, activate the Imaging mode. See ‘Take pictures in

the Imaging mode’, p. 41. The camera starts, and you can

see the view to be captured.

If the camera is in Image mode, open the video recorder

view by selecting Options > Video mode.

To make lighting and colour adjustments before recording

a video, select Options > Video setup > Scene, White

balance, or Colour tone. See ‘Setup settings—Adjust color

and lighting’, p. 44.

To select a scene, select Options > Video setup > Scene.

See ‘Scenes’, p. 45.

Camera and Gallery

Options before recording video are Image mode, Go

to Gallery, Video setup, Settings, and Help.

1Press the capture key to start recording. The record

icon is shown. The LED flash is lit, and a tone

sounds, indicating to the subject that video is being

recorded. There is no flash effect on the resultant

video.

2To pause recording at any time, select Pause. The

pause icon blinks on the display. Video recording

automatically stops if recording is set to pause and

there are no key presses within a minute.

3Select Continue to resume recording.

4Select Stop, or press the capture key to stop recording.

The video clip is automatically saved to the Images &

videofolder of Gallery. See ‘Gallery’, p. 53.

Video recorder indicators

show the following:

• The phone memory ( )

and memory card ( )

indicators (1) show

where the video is saved.

• The current video length

indicator (2) shows

elapsed time and time

remaining.

• The mode indicator (3)

shows the active mode. See ‘Scenes’, p. 45.

• The microphone indicator (4) shows that the

microphone is muted.

• The file format indicator (5) indicates the format of the

video clip.

Shortcuts are as follows:

• Press the joystick up or down to zoom in or zoom out.

The zoom indicator, which appears on the side pane,

shows the zoom level.

• Press the joystick to enter the Video setup settings. See

‘Setup settings—Adjust color and lighting’, p. 44.

After a video clip is recorded:

• To immediately play the video clip you just recorded,

select Options > Play.

• If you do not want to keep the video, select Options >

Delete.

• To return to the viewfinder to record a new video, press

the capture key.

• To send the video Via multimedia, Via e-mail, or Via

Bluetooth, select Options > Send. For more

information, see ‘Messaging’, p. 63 and ‘Bluetooth

connection’, p. 97. This option is not available during an

active call.

• To send a video clip to the other party during an active

call, select Options > Send to caller.

• To edit the video, select Options > Edit. See ‘Edit video

clips’, p. 51.

Camera and Gallery

Video settings

There are two kinds of settings for the video recorder in the

Imaging mode: Video setup settings and main settings. To

adjust Video setup settings, see ‘Setup settings—Adjust

color and lighting’, p. 44. The setup settings return to the

default settings after you close the camera, but the main

settings remain the same until you change them again. To

change the main settings, select Options > Settings and

from the following:

Audio recording—Select On if you want to record both

image and sound.

Video quality—Set the quality of the video clip to High,

Normal, or Sharing. The quality is indicated with one of

the following icons: (High), (Normal), or

(Sharing). If you select High or Normal, the length of the

video recording is restricted by the available space on your

memory card, and up to 1 hour per clip. If you want to view

the video on a TV or PC, select High video quality, which

has CIF resolution (352x288) and file format .mp4. You

cannot send video clips saved in the .mp4 format in a

multimedia message. If you want to view the clip in mobile

phones, select Normal, which has QCIF resolution

(176x144) and file format .3gp. To send the video clip

through MMS, or send it through video sharing, select

Sharing (QCIF resolution, file format .3gp). See ‘Video

sharing’, p. 30. The video clip is limited to 300 kB

(approximately 20 seconds in duration) so that it can be

conveniently sent as a multimedia message to a

compatible device. Some networks, however, may only

support sending of multimedia messages with a maximum

size of 100 kB. Contact your service provider for more

information.

Add to album—Select whether you want to save the

recorded video clip to a certain album in Gallery. Selecting

Yes opens a list of available albums.

Show captured video—Select whether you want the

recorded video clip to play automatically after the

recording stops.

Memory in use—Define the default memory store: phone

memory or memory card.

Edit video clips

You can edit video clips in Gallery in the Fold open mode

or in the Imaging mode. See ‘Take pictures in the Imaging

mode’, p. 41, and ‘Gallery’, p. 53.

To edit video clips and create custom video clips, scroll to

a video clip, and select Options >Edit. You can create

custom video clips by combining and trimming video clips,

and adding images, sound clips, transitions, and effects.

Transitions are visual effects that you can add in the

beginning and end of the video or between the video clips.

Camera and Gallery

In the video editor you can see two time-lines: video clip

timeline and sound clip timeline. If you add images, text,

or transitions to a video clip, they are shown on the video

clip timeline. To move on the timelines, scroll left or right.

To switch between the timelines, scroll up or down.

Edit video, sound, image, text, and transitions

To create custom video clips, mark and select one or more

video clips, and select Options > Edit.

In the Edit video view, you can insert video clips to make

a custom video clip, and edit the clips by trimming and

adding effects. You can add images and sound clips and

change their duration, and also add text and transitions to

the clip.

To modify the video, select from the following options:

Edit video clip:

Cut—Trims the video clip in the Cut video clip view.

Add color effect—Inserts a colour effect on the video clip.

Use slow motion—Slows the speed of the video clip.

Mute sound/Unmute sound—Mutes or unmutes the

original video clip sound.

Move—Moves the video clip to the selected location.

Remove—Removes the video clip from the video.

Duplicate—Makes a copy of the selected video clip or

sound clip.

Edit text (shown only if you have added text)—To move,

remove or duplicate text; change the colour and style of

the text; define how long it stays on the screen; and add

effects to the text.

Edit image (shown only if you have added an image)—To

move, remove or duplicate an image; define how long it

stays on the screen; and set a background or a colour

effect to the image.

Edit sound clip:

Cut—Trims the sound clip in the Cut sound clip view.

Move—Moves the sound clip to the selected location.

Remove—Removes the sound clip from the video.

Duplicate—Makes a copy of

the selected video clip or

sound clip.

Change duration—Changes

the length of the sound clip.

Edit transition—There are

three types of transitions: at

the start of a video, at the

end of a video, and

transitions between video

Camera and Gallery

clips. A start transition can be selected when the first

transition of the video is active.

Insert:

Video clip—Inserts the selected video clip. A thumbnail of

the video clip is shown in the main view. A thumbnail

consists of the first non-black view of the video clip. The

name and length of the selected video clip is also shown.

Image—Inserts the selected image. A thumbnail of the

image is shown in the main view.

Text—Inserts text to the video clip. You can insert a title,

subtitle, or credits.

Sound clip—Inserts the selected sound clip. The name and

length of the selected sound clip is shown in the main

view.

New sound clip—Records a new sound clip to the selected

location.

Movie—To preview the movie in full screen or as a

thumbnail, save or send the movie, or cut the movie to a

proper size for sending it in a multimedia message.

Tip! To take a snapshot of a video clip, select

Options > Take snapshot in the thumbnail Preview

view or in the Cut video view.

To save your video, select Options > Movie > Save. To

define the Memory in use, select Options > Settings. The

default is the phone memory.

Tip! In the Settings view, you can define Default

video name, Default sc. shot name, Save quality, and

Memory in use.

Select Send > Via multimedia, Via e-mail, or Via

Bluetooth if you want to send the video. Contact your

service provider for details of the maximum multimedia

message size that you can send. If your video is too large

to be sent in a multimedia message, the symbol

appears.

Tip! If you want to send a video clip that is over the

maximum multimedia message size allowed by your

service provider, you can send the clip using Bluetooth.

See ‘Send data using a Bluetooth connection’, p. 98. You

can also transfer your videos using Bluetooth into your

Bluetooth-enabled personal computer, or by using a

memory card reader (enhancement).

Gallery

To store and organize your images, video clips, sound clips,

playlists, and streaming links, in the Fold open mode, press

, and select Gallery. To open the gallery in the Imaging

Camera and Gallery

mode, select Options > Go to Gallery. In the Imaging

mode, only the Images & video folder is available.

Tip! To switch from

Gallery to the camera in

the Imaging mode, select

Camera.

Select Images & video ,

Tracks , Sound clips

, Links , or All files

, and press to open

it.

You can browse and open

folders; and mark, copy, and

move items to folders. Sound clips, video clips, .ram files,

and streaming links are opened and played in the

RealPlayer application. See ‘RealPlayer™’, p. 58. You can

also create albums; and mark, copy, and add items to

albums. See ‘Albums’, p. 55.

Tip! You can transfer images from your phone to a

compatible PC with Nokia Phone Browser available in

Nokia PC Suite. See the CD-ROM supplied with your

phone.

Press to open a file. Videos, music, and sound clips

open in RealPlayer. See ‘View images and video clips’, p.

54.

To copy or move files to the memory card or to phone

memory, select a file and Options > Organize> Copy to

memory card/Move to memory card or Copy to phone

mem./Move to phone mem.. Files stored on the memory

card are indicated with .

To download files into Gallery in one of the main folders

using the browser, select ( ) Graphic downls. or Video

downlds., Track downlds., or Sound downlds.. The

browser opens, and you can select a bookmark from which

the site can download.

View images and video clips

Pictures taken and video clips recorded with the camera

are stored in the Images & video folder in Gallery. The

quality of a video clip is indicated with one of the

following icons: (High), (Normal), and (Sharing).

Images and video clips can also be sent to you in a

multimedia message, as an e-mail attachment, or through

a Bluetooth connection. To be able to view a received

image or video clip in the gallery or in the media player,

you must save it in the phone memory or on a memory

card.

Open the Images & video folder in Gallery. The images and

video clip files are in a loop, and ordered by date. The

number of files can be seen on the display. To browse the

Camera and Gallery

files, scroll up or down. Press and hold the scroll key up or

down to browse the files in a continuous loop.

Tip! To navigate and open files in the Imaging mode,

use the joystick.

Options in the Images & video main view are

Open(images only), Play(videos only), Send, Go to

Camera, Add to Album, Albums, Print (images only),

Edit, Delete, Organize, Mark/Unmark, Help, and Exit.

To change all the files that are displayed, scroll left or right.

To edit a photo or a video clip, select Options > Edit. An

image editor or a video editor opens.

To add an image or a video clip to an album in the gallery,

select Options > Add to Album. See ‘Albums’, p. 55.

Options when playing a video clip are Play, Send,

Add to album, Edit, Delete, Rename, View details,

Add to ’Go to’, Help, and Exit.

To create custom video clips, select a video clip, or several

clips, in the gallery, and select Options > Edit. See ‘Edit

video clips’, p. 51.

Options when viewing an image are Zoom in/Zoom

out, Send, Add to album, Set as wallpaper, Assign to

contact, Print, Edit, Delete, Rename, View details,

Add to ’Go to’, Help, and Exit.

To print your images on a printer connected to your phone,

or to store them on your MMC for printing, select

Options > Print. See ‘Image print’, p. 57.

To zoom an image, select Options > Zoom in or Zoom out.

The zooming ratio is at the top of the display. The zooming

ratio is not stored permanently.

To delete an image or a video clip, press .

Albums

With albums you can conveniently manage your images

and video clips. To view the albums list, in the Images &

video folder, select Options > Albums. The albums are

ordered alphabetically. To view the content of an album,

press the scroll key.

To create a new album, select Options > New album.

Enter a name for the album, and select OK.

To add a picture or a video clip to an album in the gallery,

scroll to a picture or video clip, and select Options > Add

to album. A list of albums opens. Select the album to

which you want to add the picture or video clip, and press

the scroll key.

To remove a file from an album, press . The file is not

deleted from the Images & video folder in Gallery.

Camera and Gallery

Imaging

Image print

You can print images with Image print by selecting the

print option in the gallery, camera, image editor, image

viewer, or the active standby mode.

Use Image print to print your images using a data cable, a

Bluetooth connection, or your memory card.

You can only print images which are in .jpg format. The

pictures taken with the camera are automatically saved in

.jpg format.

Note: To print to a PictBridge-compliant printer,

select the print option before you connect the USB

cable.

Select the image you want to print and Options > Print.

Printer selection

When you use Image print for the first time, a list of

available printers is displayed after you select the image.

Select a printer you want to use. The printer is set as the

default printer.

If you have connected a PictBridge-compliant USB printer

using the CA-53 cable supplied with the phone, the printer

is automatically displayed.

If the default printer is not available, a list of available

printing devices is displayed again.

To change the default printer, select Options > Print

settings > Default printer.

Print preview

The print preview view opens only when you start printing

an image in the gallery or the active standby mode.

The images that you selected are displayed using

predefined layouts. To change the layout, scroll left and

right through the available layouts for the selected

printer. If the images do not fit on a single page, scroll up

or down to display the additional pages.

Options in print preview are Print, Print settings,

Help, and Exit.

Print settings

The available settings options vary, depending on the

capabilities of the printing device you selected.

Imaging

To set a default printer, select Options > Default printer.

To select the paper size, select Paper size, the size of

paper from the list, and OK. Select Cancel to return to the

previous view.

RealPlayer™

Press , and select RealPlayer. With RealPlayer, you

can play video clips, sound clips, and playlists, or stream

media files over the air. You can activate a streaming link

when you browse Web pages, or store it in the phone

memory or memory card. You can use RealPlayer also in

the Imaging mode with limited key functions. See ‘Take

pictures in the Imaging mode’, p. 41.

RealPlayer supports files with extensions such as .aac,

.awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer

does not necessarily support all file formats or all the

variations of file formats. For example, RealPlayer will

attempt to open all .mp4 files, but some .mp4 files may

include content that is not compliant with 3GPP

standards and, therefore, is not supported by this phone.

Tip! You can transfer music files from your phone to

your memory card with Nokia Audio Manager available

in Nokia PC Suite. See the CD-ROM supplied with your

phone.

Play video or sound clips

Options in RealPlayer when a clip is selected are

Play, Play in full screen/Continue, Continue in full

scr.; Stop, Mute/Unmute, Clip details, Send, Settings,

Help, and Exit.

1To play a media file stored in phone memory, or on the

memory card, select Options > Open and select:

Most recent clips—To play one of the last six files

played in RealPlayer.

Saved clip—To play a file saved in Gallery. See ‘Gallery’,

p. 53.

2Scroll to a file, and press to play the file.

Tip! To view a video clip in full screen mode, press

. Press again to change back to normal screen mode.

Icons in RealPlayer: —Repeat; —Random;

— Repeat and random; and —Loudspeaker muted.

Create a track list

To create a track list of the music tracks on your phone

memory, or on the memory card:

1Select Options > New track list.

2Select the memory from which you want to select the

music tracks.

3Enter a name for the track list.

Imaging

4Select the music tracks you want to include in the track

list.

5Select Back. The track list automatically starts to play.

Tip! To leave the application open and music playing

in the background, press twice to return to the

standby mode. To return to the application, press ,

and select RealPlayer.

Shortcuts during play:

• To fast forward, press and hold .

• To rewind through the media file, press and hold .

• To mute the sound, press and hold until the

indicator is displayed. To turn on the sound, press and

hold until you see the indicator.

Stream content over the air

Many service providers require you to use an Internet

access point (IAP) for your default access point. Other

service providers allow you to use a WAP access point.

The access points may be configured when you first start

your phone.

Contact your service provider for more information.

Note: In RealPlayer, you can only open an rtsp:// URL

address. However, RealPlayer will recognize an http link

to a .ram file.

To stream content over the air, select a streaming link

saved in Gallery, on a Web page, or received in a text

message or multimedia message. Before live content

begins streaming, your phone connects to the site and

starts loading the content. The content is not saved in the

phone.

Receive RealPlayer settings

You may receive RealPlayer settings in a special text

message from the network operator or service provider.

See ‘Data and settings’, p. 69. For more information,

contact your network operator or service provider.

Change the RealPlayer settings

Select Options > Settings and from the following:

Video—To adjust the contrast of the video, and to have

RealPlayer automatically repeat video clips after they

finish playing.

Audio—To select if you want to repeat playing of track

lists and play sound clips on a track list in random order.

Connection—To select whether to use a proxy server,

change the default access point, and set the port range

used when connecting. Contact your service provider for

the correct settings.

Proxy settings:

•Use proxy—To use a proxy server, select Yes.

Imaging

•Proxy serv. address—Enter the IP address of the

proxy server.

•Proxy port number—Enter the port number of the

proxy server.

Glossary: Proxy servers are intermediate servers between

media servers and their users. Some service providers

use them to provide additional security or speed up

access to browser pages that contain sound or video

clips.

Network settings:

•Default access point—Scroll to the access point you

want to use to connect to the Internet, and press .

•Online time—Set the time for RealPlayer to

disconnect from the network when you have paused a

media clip playing through a network link, select User

defined, and press . Enter the time, and select OK.

•Lowest UDP port—Enter the lowest port number of

the servers port range. The minimum value is 6970.

•Highest UDP port—Enter the highest port number of

the servers port range. The maximum value is 32000.

Select Options > Advanced settings to edit the

bandwidth values for different networks.

Movie Director director

To create muvees, press , and select Imaging > Movie.

muvees are short, edited video clips that can contain video,

images, music, and text. Quick muvee is created

automatically by Movie director after you select the style

for the muvee. Movie director uses the default music and

text associated with the chosen style. Every style has its

own font style, color, music, and pace. In a Custom

muveeyou can select your own video and music clips,

images and style, and add opening and closing message.

You can send muvees with MMS.

Open Movie, and press or to move between the

and views. You can also return to the main

view from the view by selecting Done.

The view contains a list of video clips that you can

Play, Send, Rename, andDelete.

Create a quick muvee

1In the Movie main view, select Quick muvee.

2Select a style for the muvee from the style list. The

created muvee is saved in Movie director muvee list.

The muvee is played automatically after saving.

Imaging

Tip! To download new styles to your phone, select

Style downlds. ( ) from the Movie director main

view.

Create a custom muvee

1In the Movie main view, select Custom muvee.

2Select the clips you want to include in your muvee in

Video, Image, Style, or Music.

After you have selected video clips and images, to

define the order in which the files are played in the

muvee, select Options > Advance. Select the file you

want to move by pressing the scroll key. Then scroll to

the file below which you want to place the marked file,

and press the scroll key.

To cut the video clips, select Options> Select contents.

See ‘Select content’, p. 61.

In Message you can add an opening and closing text to

a muvee.

3Select Create muvee. and from the following:

Multimedia message—to optimize the length of the

muvee for MMS sending.

Auto-select—to include all the selected pictures and

video clips in the muvee.

Same as music—to set the muvee duration to be the

same as the chosen music clip.

User defined—to define the length of the muvee.

4Select Options > Save.

To preview the custom muvee before saving it, in the

Preview muvee view, select Options > Play.

To create a new custom muvee by using the same style

settings, select Options > Recreate.

Select content

After you select images and video clips for your muvee,

you can edit the selected video clips. Select Options >

Advance > Options > Select contents. You can select

which parts of the video clip you want to include or

exclude in the muvee. A slider below the video screen

indicates the included, excluded, and neutralized parts

with colors: green is for included, red is for excluded, and

grey is for neutral parts.

To include a part of the video clip in the muvee, scroll to

the part, and select Options > Highlight.

To exclude a part from the video clip, scroll to the part, and

select Options > Exclude.

To let Movie director randomly include or exclude a part

of the video clip, scroll to the part, and select Options >

Neutralize.

To exclude a shot from the video clip, select Options >

Exclude shot.

To let Movie director randomly include or exclude parts

of the video clip, select Options > Neutralize all.

Imaging

Settings

Select Settings to edit the following options:

Memory in use—Select where to store your muvees.

Resolution—Select the resolution of your muvees.

Default muvee name—Set a default name for the

muvees.

Messaging

Press , and select Messaging. In Messaging, you can

create, send, receive, view, edit, and organize text

messages, multimedia messages, e-mail messages, and

special text messages containing data. You can also

receive messages and data through a Bluetooth

connection, receive Web service messages, cell broadcast

messages, and send service commands.

Note: Only devices that have compatible features

can receive and display multimedia messages. The

appearance of a message may vary depending on the

receiving device.

When you open Messaging, you can see the New message

function and a list of folders:

Inbox—Contains received messages except e-mail and

cell broadcast messages. E-mail messages are stored in the

Mailbox.

My folders—For organizing your messages into

folders.

Mailbox—In Mailbox you can connect to your remote

mailbox to retrieve your new e-mail messages or view your

previously retrieved e-mail messages offline. See ‘E-mail’,

p. 75.

Drafts—Stores draft messages that have not been

sent.

Sent—Stores the last 20 messages that have been

sent excluding messages sent using a Bluetooth

connection. To change the number of messages to be

saved, see ‘Other settings’, p. 77.

Outbox—A temporary storage place for messages

waiting to be sent.

Reports ( )—You can request the network to send

you a delivery report of the text messages and multimedia

messages you have sent. Receiving a delivery report of a

multimedia message that has been sent to an e-mail

address might not be possible.

Tip! When you have opened any of the default

folders, you can switch between the folders by pressing

or .

To enter and send service requests (also known as USSD

commands), such as activation commands for network

services, to your service provider, select Options > Service

command in the main view of Messaging.

Cell broadcast allows you to receive messages on

various topics, such as weather or traffic conditions from

Messaging

your service provider. For available topics and relevant

topic numbers, contact your service provider. In the main

view of Messaging, select Options > Cell broadcast. In

the main view you can see the status of a topic, a topic

number, name, and whether it has been flagged ( ) for

follow-up.

Options in Cell broadcast are Open, Subscribe/

Unsubscribe, Hotmark/Remove hotmark, Topic,

Settings, Help, and Exit.

Cell broadcast messages cannot be received in UMTS

networks. A packet data connection may prevent cell

broadcast reception.

Write text

Traditional text input

and indicate the selected case.

means that the first letter of the word is written in

uppercase, and all other letters are automatically written

in lowercase. indicates number mode.

The indicator is shown on the top right of the

display when you are writing text using traditional text

input.

• Press a number key ( — ) repeatedly until the

desired character appears. There are more characters

available for a number key than are printed on the key.

• To insert a number, press and hold the number key.

• To switch between letter and number mode, press and

hold .

• If the next letter is located on the same key as the

present one, wait until the cursor appears (or press

to end the time-out period), and enter the letter.

• To erase a character, press . Press and hold to

clear more than one character.

• The most common punctuation marks are available

under . Press repeatedly to reach the desired

punctuation mark.

Press to open a list of special characters. Use

to move through the list, and press Select to select a

character.

• To insert a space, press . To move the cursor to the

next line, press three times.

• To switch between the different character modes, press

Predictive text input—Predictive text

You can enter any letter with a single key press. Predictive

text input is based on a built-in dictionary to which you

can also add new words. When the dictionary becomes full,

the latest added word replaces the oldest.

Messaging

1To activate predictive text

input, press , and

select Predictive text on.

This activates predictive

text input for all editors in

the phone. is

shown on the top right of

the display when you

write text using predictive

text input.

2To write the desired word, press the keys — .

Press each key only once for one letter. For example, to

write ‘Nokia’ when the English dictionary is selected,

press for N, for o, for k, for i, and

for a.

The word suggestion changes after each key press.

3When you finish writing the word and it is correct, to

confirm it, press , or press to add a space.

If the word is not correct, press repeatedly to view

the matching words the dictionary has found one by

one, or press , and select Predictive text >

Matches.

If the ? character is shown after the word, the word you

intended to write is not in the dictionary. To add a word

to the dictionary, select Spell, enter the word using

traditional text input, and select OK. The word is added

to the dictionary. When the dictionary becomes full, a

new word replaces the oldest added word.

4Start writing the next word.

Tip! To set predictive text input on or off, press

twice quickly.

Tips on predictive text input

To erase a character, press . Press and hold to clear

more than one character.

To change between the different character modes, press

. If you press quickly twice, predictive text input

is turned off.

Tip! Predictive text input tries to guess which

commonly used punctuation mark (.,?!‘) is needed. The

order and availability of the punctuation marks depend

on the language of the dictionary.

To insert a number in letter mode, press and hold the

desired number key.

To switch between letter and number mode, press and

hold .

The most common punctuation marks are available under

. Press and then repeatedly to search for the

desired punctuation mark.

Press and hold to open a list of special characters.

Press repeatedly to view the matching words the

dictionary has found one by one.

Messaging

Press , select Predictive text, and press to select

one of the following options:

Matches—To view a list of words that correspond to your

key presses.

Insert word—To add a word to the dictionary by using

traditional text input. When the dictionary becomes full,

a new word replaces the oldest added word.

Edit word—To edit the word using traditional text input.

This is available if the word is active (underlined).

Tip! When you press , the following options

appear (depending on the editing mode): Predictive

text (predictive text input), Alpha mode (traditional

text input), Number mode, Cut (if text has been

selected), Copy (if text has been selected), Paste (when

text has been cut or copied first), Insert number,

Insert symbol, and Writing language: (changes the

input language for all editors in the phone).

Write compound words

Write the first half of a compound word; to confirm it,

press . Write the last part of the compound word. To

complete the compound word, press to add a space.

Turn predictive text input off

Press , and select Predictive text > Off to turn

predictive text input off for all editors in the phone.

Copy text to clipboard

1To select letters and words, press and hold . At the

same time, press or . As the selection moves,

text is highlighted.

2To copy the text to the clipboard, while still holding

, select Copy.

3To insert the text into a document, press and hold ,

and select Paste, or press once, and select Paste.

To select lines of text, press and hold . At the same

time press or .

To remove the selected text from the document, press

Write and send messages

The appearance of a multimedia message may vary,

depending on the receiving device.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

Tip! You can start to create a message from any

application that has the option Send. Select a file

(image or text) to be added to the message, and select

Options > Send.

Before you can create a multimedia message or write an e-

mail, you must have the correct connection settings in

Messaging

place. See ‘Receive MMS and e-mail settings’, p. 68 and ‘E-

mail’, p. 75.

The wireless network may limit the size of MMS messages.

If the inserted picture exceeds this limit, the device may

make it smaller so that it can be sent by MMS.

1Select New message. A list of message options opens.

Text message—to send a text message.

Multimedia message—to send a multimedia message

(MMS).

E-mail—to send an e-mail. If you have not set up your

e-mail account, you are prompted to do so.

2Press to select recipients or groups from contacts,

or enter the recipient’s phone number or e-mail

address. Press to add a semicolon (;) that separates

the recipients. You can also copy and paste the number

or address from the clipboard.

Tip! Scroll to a contact, and press to mark it.

You can mark several recipients at a time.

3Press to move to the message field.

4Write the message.

5To add a media object to a multimedia message, select

Options > Insert object > Image, Sound clip, or Video

clip. When sound is added, the icon is shown in the

navigation bar.

You cannot send video clips that are saved in the .mp4

format in a multimedia message. To change the format

in which recorded videos are saved, see ‘Video

settings’, p. 51.

6To take a new picture or

record sound or video for

a multimedia message,

select Insert new >

Image, Sound clip, or

Video clip. To insert a

new slide to the message,

select Slide.

Select Options > Preview

to see what the

multimedia message

looks like.

7To add an attachment to an e-mail, select Options >

Insert > Image, Sound clip, Video clip or Note. E-mail

attachments are indicated by in the navigation bar.

Tip! To send files other than sounds and notes as

attachments, open the appropriate application, and

select Send > Via e-mail, if available.

8To send the message, select Options > Send, or press

Your device supports the sending of text messages beyond

the character limit for a single message. Longer messages

will be sent as a series of two or more messages. Your

service provider may charge accordingly. Characters that

use accents or other marks, and characters from some

Messaging

language options like Chinese, take up more space

limiting the number of characters that can be sent in a

single message. In the navigation bar, you can see the

message length indicator counting backwards. For

example, 10 (2) means that you can still add 10 characters

for the text to be sent as two messages.

Note: E-mail messages are automatically placed in

Outbox before sending. If sending does not succeed,

the e-mail is left in the Outbox with the Failed status.

Tip! In Messaging you can also create presentations

and send them in a multimedia message. In the

multimedia message editor view, select Options >

Create presentation (shown only if MMS creation

mode is set to Guided or Free). See ‘Multimedia

messages’, p. 74.

Tip! When you send a multimedia message to an

e-mail address or a device that supports the receiving

of large images, use the larger image size. If you are

not sure of the receiving device, or the network does

not support sending large files, it is recommended that

you use a smaller image size or a sound clip that is no

longer than 15 seconds. To change the setting, select

Options > Settings > Multimedia message > Image

size in the Messaging main view.

Receive MMS and e-mail settings

You may receive the settings in a text message from your

network operator or service provider. See ‘Data and

settings’, p. 69.

For availability of and subscription to data services,

contact your network operator or service provider. Follow

the instructions given by your service provider.

Enter the MMS settings manually:

1Select Tools > Settings > Connection > Access points,

and define the settings for a multimedia messaging

access point. See ‘Connection settings’, p. 107.

2Select Messaging > Options > Settings > Multimedia

message > Access point in use and the access point

you created to be used as the preferred connection. See

also ‘Multimedia messages’, p. 74.

Before you can send, receive, retrieve, reply to, and forward

e-mail, you must do the following:

• Configure an Internet access point (IAP) correctly. See

‘Connection settings’, p. 107.

• Define your e-mail settings correctly. See ‘E-mail’, p.

75. You need to have a separate e-mail account. Follow

the instructions given by your remote mailbox and

Internet service provider (ISP).

Messaging

Inbox—receive messages

Inbox icons: —unread messages in Inbox; —

unread text message; —unread multimedia message;

—data received through a Bluetooth connection.

When you receive a message, and the text 1 new

message are shown in the standby mode. Select Show to

open the message. To open a message in Inbox, scroll to it,

and press .

Multimedia messages

Important: Exercise caution when opening

messages. Multimedia message objects may contain

malicious software or otherwise be harmful to your device

or PC.

You may receive a notification that you have received a

multimedia message that is saved in the multimedia

message centre. To start a packet data connection to

retrieve the message to your phone, select Options >

Retrieve.

When you open a multimedia message ( ), you may see

an image and a message, and simultaneously listen to a

sound through the loudspeaker ( is shown if sound is

included). Click the arrow in the icon to listen to the sound.

To see what kinds of media objects have been included in

the multimedia message, open the message, and select

Options > Objects. You can choose to save a multimedia

object file in your phone or send it, for example, through

a Bluetooth connection to another compatible device.

To view received multimedia presentations, select

Options > Play presentation.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

Data and settings

Your phone can receive many kinds of text messages that

contain data ( ), also called over-the-air (OTA)

messages:

Configuration message—You may receive a text message

service number, voice mailbox number, Internet access

point settings, access point login script settings, or e-mail

settings from your network operator, service provider, or

company information management department in a

configuration message. To save the settings, select

Options > Save all.

Business card—To save the information to Contacts,

select Options > Save business card. Certificates or sound

files attached to the business card are not saved.

Messaging

Ringing tone—To save the ringing tone, select Options >

Save.

Operator logo—For the logo to be shown in the standby

mode instead of the network operator’s own

identification, select Options > Save.

Calendar entry—To save the invitation, select Options >

Save to Calendar.

Web message—To save the bookmark to the bookmarks

list in Web, select Options > Add to bookmarks. If the

message contains both access point settings and

bookmarks, to save the data, select Options > Save all.

E-mail notification—Tells you how many new e-mails

you have in your remote mailbox. An extended

notification may list more detailed information.

Tip! If you receive a vCard file that has a picture

attached, the picture is saved to contacts.

Web service messages

Web service messages ( ) are notifications (for

example, news headlines) and may contain a text message

or a link. For availability and subscription, contact your

service provider.

My folders

In My folders, you can organize your messages into

folders, create new folders, and rename and delete folders.

Tip! You can use texts in the templates folder to avoid

rewriting messages that you send often.

Mailbox

If you select Mailbox and have not set up your e-mail

account, you are prompted to do so. See ‘E-mail’, p. 75.

When you create a new mailbox, the name you give to the

mailbox replaces Mailbox in the Messaging main view.

You can have up to six mailboxes.

Open the mailbox

When you open the mailbox, you can choose whether you

want to view the previously retrieved e-mail messages and

e-mail headings offline or connect to the e-mail server.

When you scroll to your mailbox, and press , the phone

asks you if you want to Connect to mailbox?.

Messaging

Select Yes to connect to your

mailbox, and retrieve new e-

mail headings or messages.

When you view messages

online, you are continuously

connected to a remote

mailbox using a packet data

connection. See also

‘Connection settings’, p. 107.

Select No to view previously

retrieved e-mail messages

offline. When you view e-mail messages offline, your

phone is not connected to the remote mailbox.

Retrieve e-mail messages

If you are offline, select Options > Connect to start a

connection to a remote mailbox.

Important: Exercise caution when opening

messages. E-mail messages may contain malicious

software or otherwise be harmful to your device or PC.

1When you have an open connection to a remote

mailbox, select Options > Retrieve e-mail.

New—to retrieve all new e-mail messages to your

phone.

Selected—to retrieve only the e-mail messages that

have been marked.

All—to retrieve all messages from the mailbox.

To stop retrieving messages, select Cancel.

2After you have retrieved the e-mail messages, you can

continue viewing them online, or select Options >

Disconnect to close the connection and view the

e-mail messages offline.

E-mail status icons:

New e-mail (offline or online mode): the content

has not been retrieved to your phone.

New e-mail: the content has been retrieved to

your phone.

The e-mail message has been read.

The e-mail heading that has been read and the

message content has been deleted from the phone.

3To open an e-mail message, press . If the e-mail

message has not been retrieved (arrow in the icon is

pointing outwards) and you are offline, you are asked

if you want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the

attachment indicator , and select Options >

Attachments. If the attachment has a dimmed indicator,

it has not been retrieved to the phone; select Options >

Retrieve. In the Attachments view, you can retrieve,

open, save, or remove attachments. You can also send

attachments using a Bluetooth connection.

Tip! If your mailbox uses the IMAP4 protocol, you can

define how many messages to retrieve, and whether to

Messaging

retrieve the attachments. With the POP3 protocol, the

options are Headers only, Partially (kB), or Msgs. &

attachs..

Delete e-mail messages

To delete the contents of an e-mail message from the

phone while still retaining it in the remote mailbox, select

Options > Delete. In Delete msg. from:, select Phone

only.

The phone mirrors the e-mail headings in the remote

mailbox. Although you delete the message content, the

e-mail heading stays in your phone. If you want to remove

the heading as well, you must first delete the e-mail

message from your remote mailbox, and then make a

connection from your phone to the remote mailbox again

to update the status.

Tip! To copy an e-mail from the remote mailbox to a

folder under My folders, select Options > Copy to

folder, a folder from the list, and OK.

To delete an e-mail from the phone and the remote

mailbox, select Options > Delete. In Delete msg. from:,

select Phone and server.

If you are offline, the e-mail is deleted first from your

phone. During the next connection to the remote mailbox,

it is automatically deleted from the remote mailbox. If you

are using the POP3 protocol, messages marked to be

deleted are removed only after you have closed the

connection to the remote mailbox.

To cancel deleting an e-mail from the phone and server,

scroll to an e-mail that has been marked to be deleted

during the next connection ( ), and select Options >

Undelete.

Disconnect from the mailbox

When you are online, select Options > Disconnect to end

the packet data connection to the remote mailbox.

Tip! You can also leave your mailbox connection open

and the new e-mails (Headers only as default) will be

retrieved from the remote mailbox to your phone

automatically (only if the IMAP IDLE function is

supported by your server). To leave the messaging

application open in the background, press twice.

Leaving the connection open may increase your call

costs due to the data traffic.

View e-mail messages when offline

When you open Mailbox the next time and you want to

view and read the e-mail messages offline, answer No to

the Connect to mailbox? query. You can read the

previously retrieved e-mail headings, the retrieved e-mail

messages, or both. You can also write new, reply to, or

forward e-mail to be sent the next time you connect to the

mailbox.

Messaging

Outbox—messages waiting

to be sent

Outbox is a temporary storage place for messages waiting

to be sent.

Status of the messages in Outbox are:

Sending—A connection is being made and the message is

being sent.

Waiting/Queued—The message will be sent when previous

messages of a similar type have been sent.

Resend at %U (time)—The phone will try to send the

message again after a time-out period. Select Send to

restart the sending immediately.

Deferred—You can set documents to be on hold while they

are in Outbox. Scroll to a message that is being sent, and

select Options > Defer sending.

Failed—The maximum number of sending attempts has

been reached. Sending has failed. If you were trying to

send a text message, open the message, and check that the

Sending options are correct.

Example: Messages are placed in the outbox, for

example, when your phone is outside network coverage.

You can also schedule e-mail messages to be sent the next

time you connect to your remote mailbox.

View messages on a SIM card

Before you can view SIM messages, you need to copy them

to a folder in your phone.

1In the Messaging main view, select Options > SIM

messages.

2Select Options > Mark/Unmark > Mark or Mark all to

mark messages.

3Select Options > Copy. A list of folders opens.

4Select a folder and OK to start copying. Open the

folder to view the messages.

Messaging settings

Text messages

Select Messaging > Options > Settings > Text message.

Message centers—Lists all the text message centres that

have been defined.

Msg. center in use—Select which message centre is used

for delivering text messages.

Receive report ( )—To request the network to send

delivery reports on your messages. When set to No, only

the Sent status is shown in the log. See ‘Log’, p. 35.

Message validity—If the recipient of a message cannot be

reached within the validity period, the message is removed

Messaging

from the text message centre. The network must support

this feature. Maximum time is the maximum amount of

time allowed by the network.

Message sent as—Change this option only if you are sure

that your message centre is able to convert text messages

into these other formats. Contact your network operator.

Preferred connection—You can send text messages

through the normal GSM network or through packet data,

if supported by the network. See ‘Connection settings’,

p. 107.

Reply via same ctr. ( )—Choose Yes, if you want the

reply message to be sent using the same text message

centre number.

Add a new text message centre

1Select Message centers > Options > New msg.

center.

2Press , write a name for the message centre, and

select OK.

3Press and , and write the number of the text

message centre. You receive the number from your

service provider.

4Select OK.

5To use the new settings, go back to the settings view.

Scroll to Msg. center in use, and select the new

message centre.

Multimedia messages

Select Messaging > Options > Settings > Multimedia

message.

Image size—Define the size of the image in a multimedia

message. The options are Original (shown only when the

MMS creation mode is set to Guided or Free), Small, and

Large. Select Original to increase the size of the

multimedia message.

MMS creation mode —If you select Guided, the phone

informs you if you try to send a message that may not be

supported by the recipient. Select Restricted; the phone

prevents you from sending messages that are not

supported.

Access point in use (Must be defined)—Select which

access point is used as the preferred connection for the

multimedia message centre.

Multimedia retrieval—Select how you want to receive

multimedia messages. To receive multimedia messages

automatically in your home network, select Aut. in home

network. Outside your home network, you receive a

notification that you have received a multimedia message

that is saved in the multimedia message centre. You can

select if you want to retrieve the message to your phone.

When you are outside your home network, sending and

receiving multimedia messages may cost you more.

Messaging

If you select Multimedia retrieval > Always automatic,

your phone automatically makes an active packet data

connection to retrieve the message both in and outside

your home network.

Allow anon. messages—Select No if you want to reject

messages from an anonymous sender.

Receive ads—Define whether you want to receive

multimedia message advertisements.

Receive report ()—Select Yes if you want the status of

the sent message to be shown in the log. Receiving a

delivery report of a multimedia message that has been sent

to an e-mail address might not be possible.

Deny report sending—Select Yes if you do not want your

phone to send delivery reports of received multimedia

messages.

Message validity—If the recipient of a message cannot be

reached within the validity period, the message is removed

from the multimedia messaging centre. The network must

support this feature. Maximum time is the maximum

amount of time allowed by the network.

Tip! You may also obtain the multimedia and e-mail

settings from your service provider through a

configuration message. Contact your service provider

for more information. See ‘Data and settings’, p. 69.

E-mail

Select Messaging > Options > Settings > E-mail, or in

the mailbox main view, select Options > E-mail settings,

and select from the following:

Mailbox in use—Select which mailbox you want to use for

sending e-mail.

Mailboxes—Opens a list of mailboxes that have been

defined. If no mailboxes have been defined, you are

prompted to do so. Select a mailbox to change the

following settings: Mailbox settings, User settings, and

Automatic retrieval.

Mailbox settings:

Mailbox name—Enter a descriptive name for the mailbox.

Access point in use (Must be defined)—Choose an

Internet access point (IAP) for the mailbox. See

‘Connection settings’, p. 107.

My e-mail address (Must be defined)—Enter the e-mail

address given to you by your service provider. Replies to

your messages are sent to this address.

Outgoing mail server (Must be defined)—Enter the IP

address or host name of the mail server that sends your

e-mail. You may only be able to use the outgoing server of

your network operator. Contact your service provider for

more information.

Messaging

User name—Enter your user name, given to you by your

service provider.

Password:—Enter your password. If you leave this field

blank, you are prompted for the password when you try to

connect to your remote mailbox.

Incoming mail server (Must be defined)—Enter the IP

address or host name of the mail server that receives your

e-mail.

Mailbox type:—Defines the e-mail protocol that your

remote mailbox service provider recommends. The options

are POP3 and IMAP4. This setting can be selected only

once and cannot be changed if you have saved or exited

from the mailbox settings. If you are using the POP3

protocol, e-mail messages are not updated automatically

in online mode. To see the latest e-mail messages, you

must disconnect and make a new connection to your

mailbox.

Security (ports)—Used with the POP3, IMAP4, and SMTP

protocols to secure the connection to the remote mailbox.

APOP secure login (not shown if IMAP4 is selected for

Mailbox type)—Used with the POP3 protocol to encrypt

the sending of passwords to the remote e-mail server

while connecting to the mailbox.

User settings:

Send message—Define how e-mail is sent from your

phone. Select Immediately for the device to connect to the

mailbox when you select Send message. If you select

When conn. avail., e-mail is sent when the connection to

the remote mailbox is available.

E-mails to retrieve (not shown if the e-mail protocol is set

to POP3)—Define how many new e-mails are retrieved to

the mailbox.

Retrieve (not shown if the e-mail protocol is set to

IMAP4)—Define which parts of the e-mails are retrieved:

Headers only, Partially (kB), or Msgs. & attachs.

Retrieve attachments (not shown if the e-mail protocol is

set to POP3)—Choose whether you want to retrieve e-mail

with or without attachments.

Subscribed folders (not shown if the e-mail protocol is set

to POP3)—You can subscribe to other folders in the remote

mailbox and retrieve content from those folders.

Send copy to self—Select Yes to save a copy of the e-mail

to your remote mailbox and to the address defined in My

e-mail address.

Include signature—Select Yes if you want to attach a

signature to your e-mail messages.

My name—Enter your own name here. Your name replaces

your e-mail address in the recipient’s phone when the

recipient’s phone supports this function.

Automatic retrieval:

Messaging

Header retrieval—When this function is on, messages are

retrieved automatically. You can define when, and how

often, the messages are retrieved.

Activating Header retrieval may increase your call costs

due to the data traffic.

Web service messages

Select Messaging > Options > Settings > Service

message. Choose whether you want to receive service

messages. If you want to set the phone to automatically

activate the browser and start a network connection to

retrieve content when the phone receives a service

message, select Download messages > Automatically.

Cell broadcast

Check the available topics and related topic numbers with

your service provider, and select Messaging > Options >

Settings > Cell broadcast to change the settings.

Reception—Choose whether you want to receive cell

broadcast messages.

Language—All allows you to receive cell broadcast

messages in all supported languages. Selected allows you

to choose in which languages you wish to receive cell

broadcast messages. If you cannot find the desired

language, select Other.

Topic detection—If you have set Topic detection > On,

the phone automatically searches for new topic numbers,

and saves the new numbers without a name to the topic

list. Select Off if you do not want to save new topic

numbers automatically.

Other settings

Select Messaging > Options > Settings > Other.

Save sent messages—Choose if you want to save a copy

of every text message, multimedia message, or e-mail that

you have sent to the Sent folder.

No. of saved msgs.—Define how many sent messages are

saved to the Sent folder at a time. The default limit is 20

messages. When the limit is reached, the oldest message

is deleted.

Memory in use—Choose the memory where you want to

save your messages: Phone memory or Memory card.

Tip! If Memory card is selected, activate the offline

profile before opening the memory card slot door or

removing the memory card. When the memory card is

not available, messages are saved in the phone

memory.

New e-mail alerts—Choose whether you want to receive

the new e-mail indications, a tone or a note, when new

mail is received to the mailbox.

Calendar

Shortcut: Press any key ( — ) in any calendar

view. A meeting entry opens, and the characters you

enter are added to the Subject field.

Tip! Regularly back up the phone information to the

memory card. You can restore the information, such as

calendar entries, to the phone later. See ‘Memory card

tool’, p. 25.

Create calendar entries

1 Press , and select

Calendar > Options >

New entry and from the

following:

Meeting—To remind you

of an appointment that

has a specific date and

time.

Memo—To write a

general entry for a day.

Anniversary—To remind

you of birthdays or

special dates. Anniversary entries are repeated every

year.

2Fill in the fields. Use to move between fields.

Alarm (meetings and anniversaries)—Select On, and

press to fill in the Alarm time and Alarm date

fields. in the day view indicates an alarm.

Repeat—Press to change the entry to be repeating

( is shown in the day view).

Repeat until—You can set an end date for the repeated

entry.

Synchronization:

Private—after synchronization the calendar entry can

be seen only by you and it will not be shown to others

with online access to view the calendar.

Public—The calendar entry is shown to others who have

access to view your calendar online.

None—The calendar entry will not be copied to your PC

when you synchronize.

3To save the entry, select Done.

To stop a calendar alarm, select Silence to turn off the

calendar alarm tone. The reminder text stays on the screen.

Select Stop to end the calendar alarm. Select Snooze to

set the alarm to snooze.

Calendar

Tip! To send a calendar note to a compatible phone,

select Options > Send > Via text message, Via

multimedia, or Via Bluetooth.

Tip! You can move calendar and to-do data from

many different Nokia phones to your phone or

synchronize your calendar and to-do to a compatible

PC using Nokia PC Suite. See the CD-ROM supplied with

the phone.

Set a calendar alarm

You can set an alarm to remind you of meetings and

anniversaries.

1Open an entry in which you want to set an alarm, and

select Alarm > On.

2Set the Alarm time and Alarm date.

3Scroll down to Repeat, and press to select how

often you want the alarm to be repeated.

4Select Done.

To delete a calendar alarm, open the entry in which you

want to delete an alarm, and select Alarm > Off.

Calendar views

Tip! Select Options > Settings to change the starting

day of the week or the view that is shown when you

open the calendar.

In the month view, dates that have calendar entries are

marked with a small triangle at the right bottom corner.

In the week view, memos and anniversaries are placed

before 8 o’clock. Press to switch between the month

view, the week view, and the day view.

Icons in the day and week views:

Memo

Anniversary

There is no icon for Meeting.

To go to a certain date, select Options > Go to date, write

the date, and select OK.

Press to jump to today.

Remove calendar entries

Removing past entries in Calendar saves space in your

phone memory.

To remove more than one event at a time, go to the month

view, and select Options > Delete entry and one of the

following:

Before date—Deletes all calendar entries that take place

before a certain date you define.

All entries—Deletes all calendar entries.

Calendar

Calendar settings

To modify the Calendar alarm tone, Default view, Week

starts on, and Week view title, select Options >

Settings.

Web

Various service providers maintain pages specifically

designed for mobile devices. To access these pages, press

, and select Web. These pages use the wireless markup

language (WML), extensible hypertext markup language

(XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and tariffs with

your network operator or service provider. Service

providers will also give you instructions on how to use their

services.

Shortcut: To start a connection, press and hold

in the standby mode.

Access the Web

• Save the settings that are needed to access the Web

page that you want to use. See the sections ‘Receive

browser settings’, p. 81 or ‘Enter the settings manually’,

p. 81.

• Make a connection to the Web. See ‘Make a

connection’, p. 82.

• Start browsing the pages. See ‘Browse’, p. 83.

• End the connection to the Web. See ‘End a connection’,

p. 85.

Receive browser settings

Tip! Settings may be available on the Web site of a

network operator or service provider.

You may receive Web service settings in a special text

message from the network operator or service provider

that offers the Web page. See ‘Data and settings’, p. 69.

For more information, contact your network operator or

service provider.

Enter the settings manually

Follow the instructions given to you by your service

provider.

1Select Tools > Settings > Connection > Access

points, and define the settings for an access point. See

‘Connection settings’, p. 107.

2Select Web > Options > Bookmark manager > Add

bookmark. Write a name for the bookmark and the

address of the page defined for the current access

point.

3To set the created access point as the default access

point in Web, select Web > Options > Settings >

Default access point.

Web

Bookmarks view

Glossary: A bookmark consists of an Internet address

(mandatory), bookmark title, access point, and if the

Web page requires, a user name and password.

Options in the bookmarks view are Open/

Download, Bookmark manager, Mark/Unmark,

Navigation options, Tools, Advanced options, Send,

Find bookmark, Details, Settings, Help, and Exit.

Your device may have some bookmarks loaded for sites

not affiliated with Nokia. Nokia does not warrant or

endorse these sites. If you choose to access them, you

should take the same precautions, for security or content,

as you would with any Internet site.

Icons in the bookmark view:

The starting page defined for the default access

point. If you use another default access point for

browsing, the starting page is changed accordingly.

The automatic bookmarks folder contains bookmarks

( ) that are collected automatically when you browse

pages. The bookmarks in this folder are automatically

organized according to domain.

Any bookmark showing the title or Internet address of

the bookmark.

Add bookmarks manually

1In the bookmarks view, select Options > Bookmark

manager > Add bookmark.

2Start to fill in the fields. Only the URL address must be

defined. The default access point is assigned to the

bookmark if no other one is selected. Press to enter

special characters such as /, ., :, and @. Press to

clear characters.

3Select Options > Save to save the bookmark.

Send bookmarks

Scroll to a bookmark, and select Options > Send > Via text

message. Press to send. It is possible to send more

than one bookmark at the same time.

Make a connection

Once you have stored all the required connection settings,

you can access the pages.

1Select a bookmark or enter the address in the field

( ). When you enter the address, matching

bookmarks are shown above the field. Press to

select a matching bookmark.

2Press to start to download the page.

Web

Connection security

If the security indicator is displayed during a

connection, the data transmission between the device and

the Internet gateway or server is encrypted.

The security icon does not indicate that the data

transmission between the gateway and the content server

(or place where the requested resource is stored) is secure.

The service provider secures the data transmission

between the gateway and the content server.

Select Options > Details > Security to view details about

the connection, encryptions status, and information about

server and user authentication.

Security features may be required for some services, such

as banking services. For such connections you need

security certificates. For more information, contact your

service provider. See also ‘Certificate management’, p. 112.

Browse

Important: Use only services that you trust and that

offer adequate security and protection against harmful

software.

Options when browsing (depending on the page you

are viewing) are Open, Accept, Remove file, Open in

viewer, Service options, Bookmarks, Save as

bookmark, Navigation options, Tools, Advanced

options, Show images, Send bookmark, Find, Details,

Settings, Help, and Exit.

On a browser page, new links appear underlined in blue

and previously visited links in purple. Images that act as

links have a blue border around them.

To open a link, to check boxes, and make selections, press

Shortcut: Use to jump to the end of a page and

to the beginning of a page.

To go to the previous page while browsing, select Back. If

Back is not available, select Options > Navigation

options > History to view a chronological list of the pages

you have visited during a browsing session. The history list

is cleared each time a session is closed.

To retrieve the latest content from the server, select

Options > Navigation options > Reload.

To save a bookmark, select Options > Save as bookmark.

Tip! To access the bookmarks view while browsing,

press and hold down . To return to the browser view

again, select Options > Back to page.

To save a page while browsing, select Options >

Advanced options > Save page. You can save pages

either to the phone memory or on a memory card, and

Web

browse them when offline. To access the pages later, press

in the bookmarks view to open the Saved pages view.

To enter a new URL address, select Options > Navigation

options > Go to web address.

To open a sublist of commands or actions for the currently

open page, select Options > Service options.

You can download files that cannot be shown on the

browser page, such as ringing tones, images, operator

logos, themes, and video clips. To download an item, scroll

to the link, and press .

When you start a download, a list of ongoing, paused, and

completed downloads from the current browsing session

is displayed. You can also view the list by selecting

Options > Tools > Downloads. In the list, scroll to an

item, and select Options to pause, resume, or cancel

ongoing downloads, or open, save, or delete completed

downloads.

Downloaded items are handled by the respective

applications in your phone, for example, a downloaded

image is saved in Gallery.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

Important: Only install and use applications and

other software from sources that offer adequate security

and protection against harmful software.

Tip! Your browser collects bookmarks automatically

while you are browsing Web pages. The bookmarks are

stored to the automatic bookmarks folder ( ) and

automatically organized according to domain. See also

‘Web settings’, p. 85.

View saved pages

If you regularly browse pages containing information that

does not change very often, you can save and browse them

when offline. In the saved pages view you can also create

folders to store your saved browser pages.

Options in the saved pages view are Open, Back to

page, Reload, Saved pages, Mark/Unmark, Navigation

options, Advanced options, Details, Settings, Help,

and Exit.

To open the saved pages view, press in the bookmarks

view. In the saved pages view, press to open a saved

page ( ).

To save a page while browsing, select Options > Advanced

options > Save page.

Web

To start a connection to the browser service and to

download the latest version of the page, select Options >

Reload. The phone stays online after you reload the page.

Download and purchase items

You can download items such as ringing tones, images,

operator logos, themes, and video clips. These items can be

provided free, or you can purchase them. Downloaded

items are handled by the respective applications in your

phone, for example, a downloaded photo can be saved in

Gallery.

Important: Only install and use applications and

other software from sources that offer adequate security

and protection against harmful software.

1To download the item, scroll to the link, and press .

2Select the appropriate option to purchase the item, for

example, ’Buy’.

3Carefully read all the information provided.

To continue the download, select Accept. To cancel the

download, select Cancel.

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

End a connection

Select Options > Advanced options > Disconnect to end

the connection and view the browser page offline, or

Options > Exit to end the connection and close the

browser.

Empty the cache

The information or services you have accessed are stored

in the cache memory of the phone.

A cache is a memory location that is used to store data

temporarily. If you have tried to access or have accessed

confidential information requiring passwords, empty the

cache after each use. The information or services you have

accessed is stored in the cache. To empty the cache, select

Options > Advanced options > Clear cache.

Web settings

Select Options > Settings and from the following:

Default access point—To change the default access point,

press to open a list of available access points. See

‘Connection settings’, p. 107.

Show images—To select if you want to load images while

browsing or not. If you select No, to load images later

during browsing, select Options > Show images.

Web

Font size—To choose the text size.

Default encoding—If text characters are not shown

correctly, you may choose another encoding according to

language.

Automatic bookmarks—To disable automatic bookmark

collecting, select Off. If you want to continue collecting

automatic bookmarks but hide the folder from the

bookmarks view, select Hide folder.

Screen size—To select what is shown when you are

browsing. Select Select. keys only or Full screen.

Homepage—To define the home page.

Search page—To define a Web page that is downloaded

when you select Navigation options > Open search page

in the bookmarks view, or when browsing.

Volume—If you want the browser to play sounds

embedded on Web pages, select a volume level.

Rendering—If you want the page layout shown as

accurately as possible when in Small screen mode, select

By quality. If you do not want external cascading style

sheets to be downloaded, select By speed.

Cookies—To enable or disable the receiving and sending

of cookies.

Glossary: Cookies are a means of content providers to

identify users and their preferences for frequently used

content.

Java/ECMA script—To enable or disable the use of scripts.

Security warnings—To hide or show security notifications.

Confirm touch tones—Choose whether you want to

confirm before the phone sends DTMF tones during a voice

call. See also ‘Options during a voice call’, p. 34.

Office

Calculator

To add, substract, multiply, divide, calculate square roots

and percentages, press , and select Office >

Calculator.

Note: This calculator has limited accuracy and is

designed for simple calculations.

To save a number in the memory (indicated by M), select

Options > Memory > Save. To retrieve a number in

memory, select Options > Memory > Recall. To clear a

number in memory, select Options > Memory > Clear.

Calculate percentages

1Enter a number for which you want to calculate a

percentage.

2Select , , , or .

3Enter the percentage.

4Select .

Converter

To convert measures such as Length from one unit (Yards)

to another (Meters), press , and select Office >

Converter.

Options in Converter are Select unit/Change

currency, Conversion type, Currency rates, Help, and

Exit.

Note that Converter has limited accuracy, and rounding

errors may occur.

1Scroll to the Type field, and press to open a list of

measures. Scroll to the measure you want to use, and

select OK.

2Scroll to the first Unit field, and press . Select the

unit from which you want to convert and OK. Scroll to

the next Unit field, and select the unit to which you

want to convert.

3Scroll to the first Amount field, and enter the value

you want to convert. The other Amount field changes

automatically to show the converted value.

Press to add a decimal and for the +, - (for

temperature), and E (exponent) symbols.

Office

Tip! To change the conversion order, enter the

value in the second Amount field. The result is

shown in the first Amount field.

Set base currency and exchange rates

Before you can make currency conversions, you need to

choose a base currency and add exchange rates. The rate

of the base currency is always 1. The base currency

determines the conversion rates of the other currencies.

1Select Converter > Options > Currency rates. A list of

currencies opens, and you can see the current base

currency at the top.

Tip! To rename a currency, go to the currency

rates view, scroll to the currency, and select

Options > Rename currency.

2To change the base currency, scroll to the currency,

and select Options > Set as base curr..

3Add exchange rates. Scroll to the currency, and enter

a new rate, that is, how many units of the currency

equal one unit of the base currency you have selected.

After you have inserted all the necessary exchange rates,

you can make currency conversions.

Note: When you change base currency, you must

enter the new rates because all previously set

exchange rates are set to zero.

To-do

Create a task list

Press , and select Office > To-do to write notes and

maintain a task list.

To add a note, press any key to start to write the task in the

Subject field.

To set the due date for the task, scroll to the Due date field,

and enter a date.

To set the priority for the To-do note, scroll to the Priority

field, and press to select the priority. The priority icons

are (High) and (Low). There is no icon for Normal.

To mark a task as completed, scroll to it in the To-do list,

and select Options > Mark as done.

To restore a task, scroll to it in the To-do list, and select

Options > Mark as not done.

Notes

Press , and select Office > Notes to write notes. You

can send notes to other compatible devices and save plain

text files (.txt format) that you receive to Notes.

Office

Recorder

Press , and select Office > Recorder to record

telephone conversations and voice memos. If you are

recording a telephone conversation, both parties hear a

tone every 5 seconds during recording.

My own

Go to—add shortcuts

Default shortcuts:

Opens Calendar

Opens Inbox

Opens Notes

To store shortcuts (links to your favorite images, notes,

bookmarks, and so on), press , and select My own > Go

to. Shortcuts are added only from the individual

applications, for example, Gallery. Not all applications

have this function.

1Select an item from an application to which you want

to add a shortcut.

2Select Add to ’Go to’. A shortcut in Go to is

automatically updated if you move the item to which

it is pointing (for example, from one folder to another).

To change the identifier in the lower left corner of the

shortcut icon, select Options > Shortcut icon.

Delete a shortcut

Select the shortcut, and press . The default shortcuts

Notes, Calendar, and Inbox cannot be deleted.

When you remove an application or a document which has

a shortcut in Go to, the shortcut icon of the removed item

is dimmed in the Go to view. The shortcut can be deleted

next time you start Go to.

IM—Instant messaging

(chat)

Press , and select My own > IM.

Instant messaging allows you to converse with other

people using instant messages and join discussion forums

(IM groups) with specific topics. Various service providers

maintain IM servers that you can log in to once you have

registered to an IM service.

Options in the IM main view are Open, Login/

Logout, Settings, Help, and Exit.

Select Conversations to start or continue a conversation

with an IM user; IM contacts to create, edit, or view the

online status of your IM contacts; IM groups to start or

continue a group conversation with multiple IM users; or

Recorded chats to view a previous instant messaging

session that you have saved.

My own

Note: Check the availability of chat services, pricing,

and tariffs with your network operator and/or service

provider. Service providers will also give you

instructions on how to use their services.

Receive IM settings

You must save the settings to access the service that you

want to use. You may receive the settings in a special text

message from the network operator or service provider

that offers the IM service. See ‘Data and settings’, p. 69.

You can also enter the settings manually. See ‘Chat server

settings’, p. 95.

Connect to an IM server

Tip: To log in automatically when you start IM, select

Options > Settings > Server settings > IM login

type > On app. start-up.

1Open IM to have your phone connect to the IM server

in use. To change the IM server in use and save new IM

servers, see ‘Chat server settings’, p. 95.

2Enter your user ID and password, and press to log

in. You obtain the user ID and password for the IM

server from your service provider.

You can select Cancel to stay offline; to log in to the

IM server later, select Options > Login. You cannot

send or receive messages while you are offline.

3To log out, select Options > Logout.

Modify your IM settings

Select Options > Settings > IM settings:

Use screen name (shown only if IM groups are supported

by the server)—To enter a nickname, select Yes.

IM presence—To allow others to see if you are online,

select Active for all.

Allow messages from—To allow messages from all, select

All.

Allow invitations from—To allow invitations only from

your IM contacts, select IM contacts only. IM invitations

are sent by IM contacts who want you to join their groups.

Msg. scrolling speed—To select the speed at which new

messages are displayed.

Sort IM contacts—To sort your IM contacts

Alphabetically or By online status.

Availability reloading—To choose how to update

information about whether your IM contacts are online or

offline, select Automatic or Manual.

My own

Search for IM groups and users

To search for groups, in the IM groups view, select

Options > Search. You can search by Group name, Topic,

and Members (user ID).

To search for users, in the IM contacts view, select

Options > New IM contact > Search from server. You

can search by User’s name, User ID, Phone number, and

E-mail address.

Join and leave an IM group

To join an IM group that you have saved, scroll to the

group, and press .

To join an IM group not on the list, but for which you

know the group ID, select Options > Join new group.

Enter the group ID, and press .

To leave the IM group, select Options > Leave IM group.

Chat

Once you have joined an IM group, you can view the

messages that are exchanged there, and send your own

messages.

Options while chatting are Send, Send private

msg., Reply, Forward, Insert smiley, Send invitation,

Leave IM group, Group, Record convers./Stop

recording, Help, and Exit.

To send a message, write the message in the message

editor field, and press .

To send a private message to a participant, select

Options > Send private msg., select the recipient, write

the message, and press .

To reply to a private message sent to you, select the

message, and select Options > Reply.

To invite IM contacts who are online to join the IM group,

select Options > Send invitation, select the contacts you

want to invite, write the invitation message, and press .

To prevent receiving messages from certain participants,

select Options > Blocking options, and select from the

following:

Add to blocked list—To block messages from the currently

selected participant.

Add ID to list manually—To enter the user ID of the

participant. Enter the ID, and press .

View blocked list—To see the participants whose

messages are being blocked.

Unblock—To select the user that you want to remove from

the blocked list. Press .

My own

Record chats

Options in the recorded chats view are Open,

Delete, Send, Mark/Unmark, Login/Logout, Settings,

Help, and Exit.

To record to a file the messages that are exchanged during

a conversation or while you are joined in a IM group, select

Options > Record convers., enter a name for the

conversation file, and press . To stop recording, select

Options > Stop recording.

The recorded conversation files are automatically saved in

Recorded chats.

To view the recorded chats, in the main view, select

Recorded chats, select the conversation, and press .

View and start conversations

Go to the Conversations view to see a list of the individual

conversation participants that you have an ongoing

conversation with.

To view a conversation, scroll to a participant, and press

Options when viewing a conversation are Send, Add

to IM contacts, Insert smiley, Forward, Record

convers./Stop recording, Blocking options, End

conversation, Help, and Exit.

To continue the conversation, write your message, and

press .

To return to the conversations list without closing the

conversation, select Back.

To close the conversation, select Options > End

conversation. Ongoing conversations are automatically

closed when you exit IM.

To start a new conversation, select Options > New

conversation:

Select recipient—To see a list of your chat contacts that

are currently online. Scroll to the contact that you want to

start a conversation with, and press .

Glossary: The user ID is provided by the service

provider to those who register to this service.

Enter user ID—To enter the user ID of the user you want

to start a conversation with, and press .

To save a conversation participant to your IM contacts,

scroll to the participant, and select Options > Add to IM

contacts.

To send automatic replies to incoming messages, select

Options > Set auto reply on. Enter the text, and select

Done. You can still receive messages.

My own

IM contacts

Go to the IM contacts to retrieve chat contact lists from

the server, or to add a new chat contact to a contact list.

When you log in to the server, the previously used chat

contact list is retrieved from the server automatically.

Options in the IM contacts view are Open

conversation, Contact details, Change contact list,

Reload user availab., Belongs to groups, New IM

contact, Move to other list, Edit, Delete, Switch

tracking on, Blocking options, Login/Logout,

Settings, Help, and Exit.

To create a new contact, select Options > New IM

contact > Enter manually. Fill in the Nickname and User

ID fields, and select Done.

To move a contact from a list on the server to the retrieved

list, select Options > New IM contact > Move from

other list.

To change the chat contact list, select Options > Change

contact list.

Select from the following options:

Open conversation—To start a new conversation or

continue an ongoing conversation with the contact.

Switch tracking on—To have the phone notify you every

time the chat contact goes online or offline.

Belongs to groups—To see which groups the chat contact

has joined.

Reload user availab.—To update information about

whether the contact is online or offline. The online status

is shown by an indicator next to the contact name. This

option is not available if you have set the Availability

reloading to Automatic in IM settings.

Manage IM groups

Options in the IM groups view are Open, Join new

group, Create new group, Leave IM group, Group,

Search, Login/ Logout, Settings, Help, and Exit.

Go to the IM groups view to see a list of the IM groups that

you have either saved or are currently joined to.

Scroll to a group, select Options > Group and one of the

following:

Save—To save an unsaved group that you are currently

joined to.

Delete—To delete a saved or created group that you are

currently not joined to.

View participants—To see who are currently joined to the

group.

Details—To see the group ID, topic, participants,

administrators of the group (shown only if you have the

My own

editing rights), the list of blocked participants (shown only

if you have the editing rights), and whether private

conversations are allowed in the group.

Settings—To view and edit the chat group settings. See

‘Create a new IM group’, p. 95.

Administrate an IM group

Create a new IM group

Select IM groups > Options > Create new group. Enter

the settings for the group.

You can edit the settings for an IM group if you have

administrator rights to the group. The user who creates a

group is automatically given administrator rights to it.

Group name, Group topic, and Welcome note—To add

details that the participants see when they join the group.

Group size—To define the maximum number of members

allowed to join the group.

Allow search—To define if others can find the chat group

by searching.

Editing rights—To define the chat group participants to

whom you want to give rights to invite contacts to join the

IM group and edit the group settings.

Group members—See ‘Add and remove group members’, p.

95.

Banned list—Enter the participants that are not allowed

to join the IM group.

Allow private msgs.—To allow messaging between

selected participants only.

Group ID—The group ID is created automatically and

cannot be changed.

Add and remove group members

To add members to a group, select IM groups, scroll to an

IM group, and select Options > Group > Settings > Group

members > Selected only or All.

To remove a member from the IM group, scroll to the

member, and select Options > Remove. To remove all

members, select Options > Remove all.

Chat server settings

Select Options > Settings > Server settings. You may

receive the settings in a special text message from the

network operator or service provider that offers the chat

service. You obtain the user ID and password from your

service provider when you register to the service. If you do

not know your user ID or password, contact your service

provider.

To change the IM server to which you wish to connect,

select Default server.

My own

To add a new server to your list of IM servers, select

Servers > Options > New server. Enter the following

settings:

Server name—Enter the name for the chat server.

Access point in use—Select the access point you want to

use for the server.

Web address—Enter the URL address of the IM server.

User ID—Enter your user ID.

Password—Enter your login password.

Connectivity

Bluetooth connection

You can connect wirelessly to other compatible devices

with Bluetooth technology. Compatible devices may

include mobile phones, computers, and enhancements

such as headsets and car kits. You can use Bluetooth

technology to send images, video clips, music and sound

clips, and notes; to connect wirelessly to your compatible

PC to, for example, transfer files; or to connect to a

compatible printer to print images with Image print. See

‘Image print’, p. 57.

Since devices with Bluetooth technology communicate

using radio waves, your phone and the other device do not

need to be in direct line-of-sight. The two devices only

need to be within 10 metres of each other, although the

connection may be subject to interference from

obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 1.2

supporting the following profiles: Basic Printing Profile,

Generic Access Profile, Serial Port Profile, Dial-up

Networking Profile, Headset Profile, Handsfree Profile,

Generic Object Exchange Profile, Object Push Profile, File

Transfer Profile, and Basic Imaging Profile. To ensure

interoperability between other devices supporting

Bluetooth technology, use Nokia approved enhancements

for this model. Check with the manufacturers of other

devices to determine their compatibility with this device.

Glossary: A profile corresponds to a service or a

function, and defines how different devices connect.

For example the Handsfree Profile is used between the

handsfree device and the phone. For devices to be

compatible, they must support the same profiles.

There may be restrictions on using Bluetooth technology

in some locations. Check with your local authorities or

service provider.

Features using Bluetooth technology, or allowing such

features to run in the background while using other

features, increase the demand on battery power and

reduces the battery life.

When the device is locked, you cannot use the Bluetooth

connection. See ‘Security’, p. 110 for more information on

locking the device.

Bluetooth connection settings

Press , and select Connect. > Bluetooth.

Connectivity

Select from the following:

Bluetooth—Set to On or Off. To connect wirelessly to

another compatible device, first set Bluetooth On, and

then establish a connection.

My phone’s visibility—To allow your phone to be found by

other devices with Bluetooth technology, select Shown to

all. To hide it from other devices, select Hidden.

My phone’s name—Define a name for your phone. After

you have set a Bluetooth connection and changed My

phone’s visibility to Shown to all, your phone and this

name can be seen by other users with devices using

Bluetooth technology.

Security tips

When you are not using Bluetooth, set Bluetooth Off, or

select My phone’s visibility > Hidden.

Do not pair with an unknown device.

Send data using a Bluetooth

connection

There can be several active Bluetooth connections at a

time. For example, if you are connected to a headset, you

can also transfer files to another compatible device at the

same time.

Bluetooth connection indicators

• When is shown in the standby mode, a Bluetooth

connection is active.

• When is blinking, your phone is trying to connect

to the other device.

• When is shown continuously, the Bluetooth

connection is active.

Tip! To send text using a Bluetooth connection

(instead of text messages), open Notes, write the text,

and select Options > Send > Via Bluetooth.

1Open an application where the item you want to send

is stored. For example, to send an image to another

compatible device, open Gallery.

2Select the item, for example an image, and select

Options > Send > Via Bluetooth. The phone searches

for devices within range. Devices with Bluetooth

technology that are within range start to appear on the

display one by one. You can see a device icon, the name

of the device, the device type, or a short name.

Tip! If you have searched for devices earlier, a list

of the devices that were found previously is shown

first. To start a new search, select More devices. If

you switch off the phone, the list is cleared.

Device icons:

—Computer; —Phone; —Audio or video; —

Headset; —Other.

Connectivity

To interrupt the search, press Stop. The device list

freezes.

3Select the device with which you want to connect.

4If the other device requires pairing before data can be

transmitted, a tone sounds, and you are asked to enter

a passcode. See ‘Pair devices’, p. 99.

5When the connection has been established, Sending

data is shown.

The Sent folder in Messaging does not store messages sent

using a Bluetooth connection.

Tip! When searching for devices, some devices may

show only the unique addresses (device addresses). To

find the unique address of your phone, enter the code

*#2820# in the standby mode.

Pair devices

Glossary: Pairing means authentication. The users of the

two devices with Bluetooth technology should agree on

a common passcode, and use the same passcode for

both devices in order to pair them. Devices that do not

have a user interface have a factory-set passcode.

In the Bluetooth main view, press to open the paired

devices view ( ).

Before pairing, create your own passcode (1—16 digits),

and agree with the owner of the other device to use the

same code. The passcode is used only once.

To pair with a device, select Options > New paired device.

The phone starts a device search. Select the device. Enter

the passcode. The same passcode must be entered on the

other device as well. After pairing, the device is saved to

the paired devices view.

Paired devices are indicated by in the device search.

Tip! To define a short name (nickname or alias) for a

paired device, scroll to the device, and select Options >

Assign short name in the paired devices view. This

name helps you to recognize a certain device during

device search or when a device requests a connection.

To set a device to be authorized or unauthorized, scroll to

a device, and select from the following options:

Set as authorized—Connections between your phone and

this device can be made without your knowledge. No

separate acceptance or authorization is needed. Use this

status for your own devices, such as your compatible

headset or PC, or devices that belong to someone you

trust. indicates authorized devices in the paired

devices view.

Set as unauthorized—Connection requests from this

device must be accepted separately every time.

To cancel a pairing, scroll to the device, and select

Options > Delete. If you want to cancel all pairings, select

Options > Delete all.

Connectivity

100

Tip! If you are currently connected to a device and

delete the pairing with that device, pairing is removed

immediately and the connection will be switched off.

Receive data using a Bluetooth

connection

When you receive data using a Bluetooth connection, a

tone sounds, and you are asked if you want to accept the

message. If you accept, is shown, and the item is

placed in the Inbox folder in Messaging. Messages

received using a Bluetooth connection are indicated by

. See ‘Inbox—receive messages’, p. 69.

Switch off Bluetooth connectivity

To switch off Bluetooth connectivity, select Bluetooth >

Off.

PC connections

You can use your phone with a variety of PC connectivity

and data communications applications. With Nokia PC

Suite you can, for example, synchronize contacts,

calendar and To-do notes, and transfer images between

your phone and a compatible PC. For further information

on how to install Nokia PC Suite (compatible with

Windows 2000 and Windows XP), see the User Guide for

Nokia PC Suite and the Nokia PC Suite help in the ‘Install’

section on the CD-ROM.

CD-ROM

The CD-ROM should launch after you have inserted it into

the CD-ROM drive of a compatible PC. If not, proceed as

follows: Open Windows Explorer, right-click the CD-ROM

drive where you inserted the CD-ROM, and select

Autoplay.

Your phone as a modem

You can use your phone as a modem to send and receive

e-mail, or to connect to the Internet with a compatible PC

by using a Bluetooth connection or a data cable. Detailed

installation instructions can be found in the User Guide for

Nokia PC Suite in Modem options on the CD-ROM.

Tip! When using Nokia PC Suite for the first time, to

connect your phone to a compatible PC and to use

Nokia PC Suite, use the Get Connected wizard available

in Nokia PC Suite. See the CD-ROM supplied in the sales

package.

Connectivity

101

Connection manager

You may have multiple data connections active at the

same time when you are using your phone in GSM and

UMTS networks. Press , and select Connect. > Conn.

mgr. to view the status of multiple data connections, view

details on the amount of data sent and received, and end

connections. When you open Conn. mgr., you can see the

following:

• Open data connections: data calls ( ) and packet

data connections ( )

• The status of each connection

• The amount of data uploaded and downloaded for each

connection (shown for packet data connections only)

• The duration of each connection (shown for data calls

only)

Note: The actual time invoiced for calls by your

service provider may vary, depending on network

features, rounding off for billing, and so forth.

To end a connection, scroll to a connection, and select

Options > Disconnect.

To close all currently open connections, select Options >

Disconnect all.

View data connection details

Options in the Conn. mgr. main view when there

are one or more connections are Details, Disconnect,

Disconnect all, Help, and Exit.

To view the details of a connection, scroll to a connection,

and select Options > Details.

Name—The name of the Internet access point (IAP) in use,

or the modem connection name if the connection is a

dial-up connection.

Bearer—The type of data connection: Data call, High sp.

GSM, or Packet data.

Status—The current status of the connection:

Connecting, Conn.(inact.), Conn.(active), On hold,

Disconnctng., or Disconnected.

Received—The amount of data, in bytes, received to the

phone.

Sent—The amount of data, in bytes, sent from the phone.

Duration—The length of time that the connection has

been open.

Speed—The current speed of both sending and receiving

data in kilobytes per second.

Dial-up—The dial-up number used.

Name—Access point name used.

Connectivity

102

Shared (not shown if the connection is not shared)—The

number of applications using the same connection.

Remote synchronization

Press , and select Connect. > Sync. Sync enables you

to synchronize your notes, calendar, and contacts with

various calendar and address book applications on a

compatible computer or on the Internet.

The syncronisation application uses SyncML technology

for synchronisation. For information on SyncML

compatibility, contact the supplier of the calendar or

address book application you want to synchronize your

phone data with.

You may receive syncronisation settings in a special text

message. See ‘Data and settings’, p. 69.

Create a new syncronisation profile

Options in the Sync main view are Synchronize,

New sync profile, Edit sync profile, Delete, View log,

Set as default, Help, and Exit.

1If no profiles have been defined, the phone asks if you

want to create a new profile. Select Yes.

To create a new profile in addition to existing ones,

select Options > New sync profile. Choose whether

you want to use the default setting values or copy the

values from an existing profile to be used as the basis

for the new profile.

2Define the following:

Sync profile name—Write a descriptive name for the

profile.

Data bearer—Select the connection type: Web, or

Bluetooth.

Access point (shown only if Data bearer is set to

Web)—Select an access point to use for the data

connection.

Host address—The IP address of the host server.

Contact your service provider or system administrator

for the correct values.

Port (shown only if Data bearer is set to Web)—

Contact your service provider or system administrator

for the correct values.

User name—Your user ID for the syncronisation server.

Contact your service provider or system administrator

for your correct ID.

Password—Write your password. Contact your service

provider or system administrator for the correct value.

Allow sync requests—Select Yes if you want to allow

the server to start a syncronisation.

Connectivity

103

Accept all sync reqs.—Select No if you want the phone

to ask you before a syncronisation initialized by the

server is started.

Network authentic. (shown only if Data bearer is set

to Web)—Select Yes to enter a network user name and

password. Press to view the user name and

password fields.

Press to select Calendar, Contacts, or Notes.

•Select Yes if you want to synchronize the selected

database.

•In Remote database, select the synchronisation

type: Normal (two-way synchronisation), To server

only, or To phone only.

•Select Synchronization type: Normal (two-way

syncronisation), To server only, or To phone only.

Enter a correct path to the remote calendar, address

book, or notes database on the server.

3Select Back to save the settings and return to the main

view.

Synchronize data

In the Sync main view, you can see the different

syncronisation profiles and the kind of data to be

synchronized.

1Select a syncronisation profile and Options>

Synchronize. The status of the syncronisation is shown

at the bottom of the screen.

To cancel syncronisation before it finishes, select

Cancel.

2You are notified when the syncronisation is complete.

After syncronisation is complete, select Options >

View log to open a log file showing the syncronisation

status (Complete or Incomplete) and how many

calendar or contact entries, or notes have been added,

updated, deleted, or discarded (not synchronized) in

the phone or on the server.

Device manager

Press , and select Connect. > Dev. mgr.. You may

receive server profiles and different configuration settings

from your network operator, service provider, or company

information management department. These

configuration settings may include access point settings

for data connections and other settings used by different

applications in your phone.

To connect to a server and receive configuration settings

for your phone, select Start configuration.

To allow or deny receiving of configuration settings from

a service provider, select Enable config. or Disable

config..

Connectivity

104

Server profile settings

Contact your service provider for the correct settings.

Server name—Enter a name for the configuration server.

Server ID—Enter the unique ID to identify the

configuration server.

Server password—Enter a password to identify your

phone to the server.

Session mode— Select Bluetooth or Web.

Access point—Select an access point to be used when

connecting to the server.

Host address—Enter the URL address of the server.

Port—Enter the port number of the server.

User name and Password—Enter your user name and

password.

Allow configuration—To receive configuration settings

from the server, select Yes.

Auto-accept all reqs.—If you want the phone to ask for

confirmation before accepting a configuration from the

server, select No.

Tools

105

Tools

Settings

To change settings, press , and select Tools > Settings.

Scroll to a setting group, and press to open it. Scroll to

a setting you want to change, and press .

Phone settings

General

Phone language—Changing the language of the display

texts in your phone also affects the format used for date

and time and the separators used, for example, in

calculations. Automatic selects the language according to

the information on your SIM card. After you change the

display text language, the phone restarts.

Changing the settings for Phone language or Writing

language affects every application in your phone, and the

change remains effective until you change these settings

again.

Writing language—Changing the language affects the

characters and special characters available when writing

text and the predictive text dictionary used.

Predictive text—You can set the predictive text input On

or Off for all editors in the phone. The predictive text

dictionary is not available for all languages.

Welcome note or logo—The welcome note or logo is

displayed briefly each time you switch on the phone.

Select Default to use the default image, Text to write a

welcome note (up to 50 letters), or Image to select a photo

or picture from Gallery.

Orig. phone settings—You can reset some of the settings

to their original values. To do this, you need the lock code.

See ‘Security’, ‘Phone and SIM’, p. 111. After resetting, the

phone may take a longer time to power on. Documents

and files are unaffected.

Standby mode

Active standby—Use shortcuts to applications in the

standby mode on the main display. See ‘Active standby

mode’, p. 17.

Tools

106

Left selection key—To assign a shortcut to the left

selection key ( ) in the standby mode, select an

application from the list.

Right selection key—To assign a shortcut to the right

selection key ( ) in the standby mode, select an

application from the list.

Active standby apps.—To select the application shortcuts

you want to appear in the active standby. This setting is

only available if Active standby is on.

You can also assign keypad shortcuts for the different

presses of the scroll key, by selecting an application from

the list. The scroll key shortcuts are not available if the

active standby is on.

Operator logo—This setting is visible only if you have

received and saved an operator logo. You can choose if

you want the operator logo to show or not.

Display

Brightness—You can change

the brightness of the main

display to lighter or darker.

The brightness of the display

is automatically adjusted

according to the

environment.

Screen saver timeout—The

screen saver on the main

display is activated when the

timeout period is over.

Light time-out—Select a time-out after which the

backlight of the main display is switched off.

Call settings

Send my caller ID ( )—You can set your phone number

to be displayed to (Yes) or hidden from (No) the person to

whom you are calling, or the value may be set by your

network operator or service provider when you make a

subscription (Set by network).

Call waiting ( )—If you have activated call waiting, the

network notifies you of a new incoming call while you

have a call in progress. Select Activate to request the

Tools

107

network to activate call waiting, Cancel to request the

network to deactivate call waiting, or Check status to

check if the function is active or not.

Reject call with SMS—Select Yes to send a text message

to a caller informing why you could not answer the call.

See ‘Answer or reject a call’, p. 33.

Message text—Write a text to be sent in a text message

when you reject a call.

Image in video call—You can deny video sending when

you receive a video call. Select a still image to be displayed

instead of video.

Automatic redial—Select On, and your phone makes a

maximum of ten attempts to connect the call after an

unsuccessful call attempt. To stop automatic redialing,

press .

Summary after call—Activate this setting if you want the

phone to briefly display the approximate duration of the

last call.

1-touch dialing—Select On, and the numbers assigned to

the 1-touch dialing keys ( - ) can be dialed by

pressing and holding the key. See also ‘1-touch dial a

phone number’, p. 28.

Anykey answer—Select On, and you can answer an

incoming call by briefly pressing any keypad key, except

, , , and .

Line in use ( )—This setting is shown only if the SIM

card supports two subscriber numbers, that is, two phone

lines. Select which phone line you want to use for making

calls and sending text messages. Calls on both lines can be

answered irrespective of the selected line. If you select

Line 2 and have not subscribed to this network service,

you will not be able to make calls. When line 2 is selected,

is shown in the standby mode.

Tip! To switch between the phone lines, press and

hold in the standby mode.

Line change ( )—To prevent line selection, select Line

change > Disable if supported by your SIM card. To

change this setting, you need the PIN2 code.

Connection settings

Data connections and access points

Your phone supports packet data connections ( ), such as

GPRS in the GSM network.

Glossary: General packet radio service (GPRS) uses

packet data technology where information is sent in

short packets of data over the mobile network.

To establish a data connection, an access point is required.

You can define different kinds of access points, such as:

Tools

108

• MMS access point to send and receive multimedia

messages

• Access point for the Web application to view WML or

XHTML pages

• Internet access point (IAP) to send and receive e-mail

Check the type of access point you need with your service

provider for the service you wish to access. For availability

and subscription to packet data connection services,

contact your network operator or service provider.

Packet data connections in GSM and UMTS

networks

When you use your phone in GSM and UMTS networks,

multiple data connections can be active at the same time

and access points can share a data connection. In the

UMTS network, data connections remain active during

voice calls. To check the active data connections, see

‘Connection manager’, p. 101.

The following indicators may be displayed below the

signal indicator, depending on which network you use:

GSM network, packet data is available in the network.

GSM network, packet data connection is active, data is

being transferred.

GSM network, multiple packet data connections are

active.

GSM network, packet data connection is on hold. (This

can happen during a voice call, for example.)

UMTS network, packet data is available in the network.

UMTS network, packet data connection is active, data is

being transferred.

UMTS network, multiple packet data connections are

active.

UMTS network, packet data connection is on hold.

Receive access point settings

You may receive access point settings in a text message

from a service provider, or you may have preset access

point settings in your phone. See ‘Data and settings’, p. 69.

To create a new access point, press , and select Tools >

Settings > Connection > Access points.

An access point may be protected ( ) by your network

operator or service provider. Protected access points

cannot be edited or deleted.

Access points

Tip! See also ‘Receive MMS and e-mail settings’, p. 68,

‘E-mail’, p. 75, and ‘Access the Web’, p. 81.

Follow the instructions given to you by your service

provider.

Tools

109

Connection name—Give a descriptive name for the

connection.

Data bearer—Depending on what data connection you

select, only certain setting fields are available. Fill in all

fields marked with Must be defined or with a red asterisk.

Other fields can be left empty, unless you have been

instructed otherwise by your service provider.

To be able to use a data connection, the network service

provider must support this feature, and if necessary,

activate it for your SIM card.

Access point name (for packet data only)—The access

point name is needed to establish a connection to the

packet data and UMTS networks. You obtain the access

point name from your network operator or service provider.

User name—The user name may be needed to make a data

connection, and is usually provided by the service provider.

The user name is often case-sensitive.

Prompt password—If you must enter a new password

every time you log in to a server, or if you do not want to

save your password in the phone, select Yes.

Password—A password may be needed to make a data

connection, and is usually provided by the service provider.

The password is often case-sensitive.

Authentication—Select Normal or Secure.

Homepage—Depending on what you are setting up, write

the Web address or the address of the multimedia

messaging centre.

Select Options > Advanced settings to change the

following settings:

Network type—Select the Internet protocol type to use:

IPv4 settings or IPv6 settings. The other settings depend

on the selected network type.

Phone IP address (for IPv4)—Enter the IP address of your

phone.

Name servers—In Primary name server:, enter the IP

address of the primary DNS server. In Second. name

server:, enter the IP address of the secondary DNS server.

Contact your Internet service provider to obtain these

addresses.

Glossary: The domain name service (DNS) is an

Internet service that translates domain names such as

www.nokia.com into IP addresses like

192.100.124.195.

Proxy serv. address—Define the address for the proxy

server.

Proxy port number—Enter the proxy port number.

Tools

110

Packet data

The packet data settings affect all access points using a

packet data connection.

Packet data conn.—If you select When available and you

are in a network that supports packet data, the phone

registers to the packet data network. Also, starting an

active packet data connection is quicker (for example, to

send and receive e-mail). If you select When needed, the

phone uses a packet data connection only if you start an

application or action that needs it. If there is no packet

data coverage and you select When available, the phone

periodically tries to establish a packet data connection.

Access point—The access point name is needed to use

your phone as a packet data modem to your computer.

Configurations

You may receive trusted server settings from your network

operator or service provider in a configuration message, or

the settings may be stored on your SIM or USIM card. You

can save these settings to your phone, view or delete them

in Configurations.

Date and time

See ‘Clock settings’, p. 23.

See also the language settings in ‘General’, p. 105.

Security

Phone and SIM

PIN code request—When active, the code is requested

each time the phone is switched on. Deactivating the

personal identification number (PIN) code request may not

be allowed by some SIM cards. See ‘Glossary of PIN and

lock codes’, p. 111.

PIN code, PIN2 code, and Lock code—You can change the

lock code, PIN code, and PIN2 code. These codes can only

include the numbers from 0 to 9. See ‘Glossary of PIN and

lock codes’, p. 111.

Avoid using access codes similar to the emergency

numbers to prevent accidental dialing of the emergency

number.

If you forget any of these codes, contact your service

provider.

Autolock period—You can set an autolock period, a

time-out after which the phone automatically locks and

can be used only if the correct lock code is entered. Enter

a number for the time-out in minutes, or select None to

turn off the autolock period.

Tools

111

To unlock the phone, enter the lock code.

When the device is locked, calls still may be possible to the

official emergency number programmed into your device.

Tip! To lock the phone manually, press . A list of

commands opens. Select Lock phone.

Lock if SIM changed—You can set the phone to ask for the

lock code when an unknown SIM card is inserted into your

phone. The phone maintains a list of SIM cards that are

recognized as the owner’s cards.

Closed user group ( )—You can specify a group of

people to whom you can call and who can call you.

When calls are limited to closed user groups, calls still may

be possible to the official emergency number programmed

into your device.

Confirm SIM services ( )—You can set the phone to

display confirmation messages when you are using a SIM

card service.

Glossary of PIN and lock codes

If you forget any of these codes, contact your service

provider.

Personal identification number (PIN) code—This code

protects your SIM card against unauthorized use. The PIN

code (4 to 8 digits) is usually supplied with the SIM card.

After three consecutive incorrect PIN code entries, the PIN

code is blocked, and you need to unblock it before you can

use the SIM card again. See the information about the

PUK code in this section.

UPIN code—This code may be supplied with the USIM card.

The USIM card is an enhanced version of the SIM card and

is supported by UMTS mobile phones. The UPIN code

protects the USIM card against unauthorized use.

PIN2 code—This code (4 to 8 digits) is supplied with some

SIM cards, and is required to access some functions in

your phone.

Lock code (also known as security code)—This code (5

digits) can be used to lock the phone to avoid

unauthorized use. The factory setting for the lock code is

12345. To avoid unauthorized use of your phone, change

the lock code. Keep the new code secret and in a safe place

separate from your phone.

Personal unblocking key (PUK) code and PUK2 code—These

codes (8 digits) are required to change a blocked PIN code

or PIN2 code, respectively. If the codes are not supplied

with the SIM card, contact the operator whose SIM card

is in your phone.

UPUK code—This code (8 digits) is required to change a

blocked UPIN code. If the code is not supplied with the

USIM card, contact the operator whose USIM card is in

your phone.

Tools

112

Certificate management

Digital certificates do not guarantee safety; they are used

to verify the origin of software.

Glossary: Digital certificates are used to verify the

origin of the XHTML or WML pages and installed

software. However, they can only be trusted if the

origin of the certificate is known to be authentic.

In the certificate management main view, you can see a

list of authority certificates that are stored in your phone.

Press to see a list of personal certificates, if available.

Options in the certificate management main view

are Certificate details, Delete, Trust settings,

Mark/Unmark, Help, and Exit.

Digital certificates should be used if you want to connect

to an online bank or another site or remote server for

actions that involve transferring confidential information.

They should also be used if you want to reduce the risk of

viruses or other malicious software and be sure of the

authenticity of software when downloading and installing

software.

Important: Even if the use of certificates makes the

risks involved in remote connections and software

installation considerably smaller, they must be used

correctly in order to benefit from increased security. The

existence of a certificate does not offer any protection by

itself; the certificate manager must contain correct,

authentic, or trusted certificates for increased security to

be available. Certificates have a restricted lifetime. If

Expired certificate or Certificate not valid yet is shown

even if the certificate should be valid, check that the

current date and time in your device are correct.

View certificate details—check authenticity

You can only be sure of the correct identity of a server

when the signature and the period of validity of a server

certificate have been checked.

You are notified on the phone display if the identity of the

server is not authentic or if you do not have the correct

security certificate in your phone.

To check certificate details, scroll to a certificate, and

select Options > Certificate details. When you open

certificate details, the validity of the certificate is checked,

and one of the following notes may be displayed:

•Certificate not trusted—You have not set any

application to use the certificate. See ‘Change the trust

settings’, p. 113.

•Expired certificate—The period of validity has ended

for the selected certificate.

•Certificate not valid yet—The period of validity has

not yet begun for the selected certificate.

•Certificate corrupted—The certificate cannot be used.

Contact the certificate issuer.

Tools

113

Change the trust settings

Before changing any certificate settings, you must make

sure that you really trust the owner of the certificate and

that the certificate really belongs to the listed owner.

Scroll to an authority certificate, and select Options >

Trust settings. Depending on the certificate, a list of the

applications that can use the selected certificate is shown.

For example:

•Symbian installation: Yes—The certificate is able to

certify the origin of a new Symbian operating system

application.

•Internet: Yes—The certificate is able to certify servers.

•App. installation: Yes—The certificate is able to certify

the origin of a new Java application.

Select Options > Edit trust setting to change the value.

Call forwarding

Call forwarding allows you to forward your incoming calls

to your voice mailbox or another phone number. For

details, contact your service provider.

1Press , and select Tools > Settings > Call

forwarding.

2Select which calls you want to forward: Voice calls,

Data and video calls, or Fax calls.

3Select the desired forwarding option. To forward voice

calls when your number is busy or when you reject

incoming calls, select If busy.

4Set the forwarding option on (Activate) or off

(Cancel), or check whether the option is activated

(Check status). Several forwarding options can be

active at the same time.

When all calls are forwarded, is shown in the

standby mode.

Call restrictions and call forwarding cannot be active at

the same time.

Call restriction

Call restriction allows you to restrict the calls that you

make or receive with the phone. To change the settings,

you need the restriction password from your service

provider. Select the desired restriction option, and set it on

(Activate) or off (Cancel), or check whether the option is

active (Check status). Call restriction affects all calls,

including data calls.

Call restrictions and call forwarding cannot be active at

the same time.

When calls are restricted, calls still may be possible to

certain official emergency numbers.

Tools

114

Network

Your phone can automatically switch between the GSM

and UMTS networks. The GSM network is indicated with

in the standby mode. The UMTS network is indicated

with .

Network mode (shown only if supported by the

operator)—Select which network to use. If you select Dual

mode, the phone uses the GSM or UMTS network

automatically, according to the network parameters and

the roaming agreements between the network operators.

Contact your network operator for more details.

Operator selection—Select Automatic to set the phone

to search for and select one of the available networks, or

Manual to manually select the network from a list of

networks. If the connection to the manually selected

network is lost, the phone sounds an error tone and asks

you to reselect a network. The selected network must have

a roaming agreement with your home network, that is, the

operator whose SIM card is in your phone.

Glossary: A roaming agreement is an agreement

between two or more network service providers to

enable the users of one service provider to use the

services of other service providers.

Cell info display—Select On to set the phone to indicate

when it is used in a cellular network based on microcellular

network (MCN) technology and to activate cell info

reception.

Enhancement settings

Indicators shown in the standby mode:

A headset is connected.

A loopset is connected.

A car kit with Bluetooth technology is connected.

The headset is unavailable, or a Bluetooth connection

to a headset is lost.

Select Headset, Loopset, or Bluetooth handsfree, and the

following options are available:

Default profile—To set the profile that you want activated

each time you connect a certain enhancement to your

phone. See ‘Profiles—Set tones’, p. 15.

Automatic answer—To set the phone to answer an

incoming call automatically after 5 seconds. If the Ringing

type is set to Beep once or Silent, automatic answer is

disabled.

Tools

115

Cover display settings

Brightness—To change the brightness of the cover display,

close the fold, and adjust the brightness on the cover

display with the joystick.

Wallpaper—Select the background image and how time is

displayed on the cover display in the standby mode.

Power saver—Select the cover display power saver type, its

time-out period, and if an image or an animation screen

saver is shown after the time-out period before the power

saver is activated.

Voice commands

You can use voice commands to control your phone. For

more information about the enhanced voice commands

supported by your phone, see ‘Voice dialing’, p. 28.

To activate enhanced voice commands for starting

applications or profiles, you must open the Voice com.

application and its Profiles folder. Press , and select

Tools > Voice com. > Profiles; the phone creates voice

tags for the applications and profiles. You can now use

enhanced voice commands by pressing and holding the

capture key and saying a voice command. The voice

command is the name of the application or profile

displayed in the list.

To add more applications to the list, select Options > New

application. To add a second voice command that can be

used to start the application, scroll to it, select Options >

Change command, and enter the new voice command as

text. Avoid very short names, abbreviations, and acronyms.

To change voice command settings, select Options >

Settings. To switch off the synthesizer that plays

recognized voice tags and commands in the selected

phone language, select Synthesizer > Off. To reset voice

recognition learning, for example, when the main user of

the phone has changed, select Remove my adapts..

Application manager

Press , and select Tools > Manager. You can install

two types of applications and software to your phone:

• J2ME™ applications based on Java™ technology with

the extension .jad or .jar ( ). Do not download

PersonalJava™ applications to your phone, as they

cannot be installed.

• Other applications and software suitable for the

Symbian operating system ( ). The installation files

Tools

116

have the .sis extension. Only install software

specifically designed for your Nokia XXXX device.

Installation files may be transferred to your phone from a

compatible computer, downloaded during browsing, or

sent to you in a multimedia message, as an e-mail

attachment, or using a Bluetooth connection. You can use

Nokia Application Installer in Nokia PC Suite to install an

application to your phone or a memory card. If you use

Microsoft Windows Explorer to transfer a file, save the file

to a memory card (local disk).

Example: If you have received the installation file as

an e-mail attachment, go to your mailbox, open the

e-mail, open the attachments view, scroll to the

installation file, and press to start installation.

Install applications and software

Tip! You can also use Nokia Application Installer

available in Nokia PC Suite to install applications. See

the CD-ROM supplied with the phone.

Application icons are as follows: .sis application;

Java application; application is not fully installed;

application is installed on the memory card.

Important: Only install and use applications and

other software from sources that offer adequate security

and protection against harmful software.

Before installation, note the following:

• To view the application type, version number, and the

supplier or manufacturer of the application, select

Options > View details.

• To display the security certificate details of the

application, select Options > View certificate. See

‘Certificate management’, p. 112.

• If you install a file that contains an update or repair to

an existing application, you can only restore the

original application if you have the original installation

file or a full back-up copy of the removed software

package. To restore the original application, remove the

application, and install the application again from the

original installation file or the back-up copy.

• The .jar file is required for installing Java applications.

If it is missing, the phone may ask you to download it.

If there is no access point defined for the application,

you are asked to select one. When you are downloading

the .jar file, you may need to enter a user name and

password to access the server. You obtain these from

the supplier or manufacturer of the application.

1Open Manager, and scroll to an installation file.

Alternatively, search the phone memory or the memory

card in File mgr., or open a message in Messaging >

Inbox that contains an installation file.

Select the application, and press to start the

installation.

Tools

117

Tip! While browsing, you can download an

installation file and install it without closing the

connection.

2Select Options > Install.

During installation, the phone shows information

about the progress of the installation. If you are

installing an application without a digital signature or

certification, the phone displays a warning. Continue

installation only if you are sure of the origin and

contents of the application.

To start an installed application, locate it in the menu, and

press .

To start a network connection and to view extra

information about the application, scroll to it, and select

Options > Go to web address, if available.

To see what software packages have been installed or

removed and when, select Options > View log.

To send your installation log to a help desk so that they can

see what has been installed or removed, select Options >

Send log > Via text message or Via e-mail (available only

if the correct e-mail settings are in place).

Remove applications and software

Scroll to a software package, and select Options >

Remove. Select Yes to confirm.

If you remove software, you can only reinstall it if you

have the original software package or a full backup of the

removed software package. If you remove a software

package, you may no longer be able to open documents

created with that software.

Note: If another software package depends on the

software package that you removed, the other

software package may stop working. Refer to the

documentation of the installed software package for

details.

Application settings

Select Options > Settings and from the following:

Software installation—Select if Symbian software can be

installed: On, Signed only, or Off.

Online certif. check—Select to check the online

certificates before installing an application.

Default web address—Set the default address used when

checking online certificates.

Some Java applications may require a phone call, a

message to be sent, or a network connection to a specific

access point for downloading extra data or components.

In the Manager main view, scroll to an application, and

select Options > Suite settings to change settings related

to that specific application.

Tools

118

Activation keys—handle

(including ringing tones), and other content from being

copied, modified, transferred or forwarded.

Press , and select Tools > Activation keys to view the

digital rights activation keys stored in your phone:

• Valid keys ( ) are connected to one or more media

files.

• With expired keys ( ), you have no time to use the

media file, or the time period for using the file is

exceeded. To view the Expired activation keys, press

To buy more usage time or extend the usage period for a

media file, select an activation key, and Options >

Activate content. Activation keys cannot be updated if

Web service message reception is disabled. See ‘Web

service messages’, p. 77.

To view which keys are not in use at the moment (Not

used), press twice. Unused activation keys have no

media files connected to them saved in the phone.

To view detailed information such as the validity status

and ability to send the file, select an activation key, and

press .

Troubleshooting

119

Troubleshooting

Q&A

Bluetooth connectivity

Q: Why can’t I find my friend’s device?

A: Check that both devices have activated Bluetooth

connectivity.

Check that the distance between the two devices is not

over 10 metres and that there are no walls or other

obstructions between the devices.

Check that the other device is not in hidden mode.

Check that both devices are compatible.

Q: Why can’t I end a Bluetooth connection?

A: If another device is connected to your phone, you can either

end the connection using the other device or by

deactivating Bluetooth connectivity. Select Connect. >

Bluetooth > Off.

Multimedia messaging

Q: What should I do when the phone cannot receive a

multimedia message because memory is full?

A: The amount of memory needed is indicated in the error

message: Not enough memory to retrieve message.

Delete some data first. To view what kind of data you

have and how much memory the different data groups

consume, select File manager > Options > Memory

details.

Q: The note Retrieving message is shown briefly. What is

happening?

A: The phone is trying to retrieve a multimedia message from

the multimedia messaging centre.

Check that the settings for multimedia messaging are

defined correctly and that there are no mistakes in phone

numbers or addresses. Select Messaging > Options >

Settings > Multimedia message.

Q: How can I end the data connection when the phone starts

a data connection again and again?

A: To stop the phone from making a data connection, select

Messaging and one of the following:

On receiving msg. > Defer retrieval—To have the

multimedia messaging centre save the message to be

retrieved later, for example, after you have checked the

settings. After this change, the phone still needs to send

information notes to the network. To retrieve the message

now, select Retr. immediately.

On receiving msg. > Reject message—To reject all

incoming multimedia messages. After this change, the

phone needs to send information notes to the network,

and the multimedia messaging centre deletes multimedia

messages that are waiting to be sent to you.

Multimedia reception > Off—To ignore all incoming

Troubleshooting

120

multimedia messages. After this change, the phone does

not make any network connections related to multimedia

messaging.

Messaging

Q: Why can’t I select a contact?

A: The contact card does not have a phone number or an

e-mail address. Add the missing information to the

contact card in Contacts.

Camera

Q: Why do images look smudgy?

A: Ensure that the camera lens protection window is clean.

Q: Why is the camera application not in the main menu?

A: The camera is started automatically when you activate the

Imaging mode or the Camera mode. See ‘Modes’, p. 19.

Calendar

Q: Why are the week numbers missing?

A: If you have changed the calendar settings so that the week

starts on a day other than Monday, the week numbers are

not shown.

Browser services

Q: What do I do if the following message is displayed: No

valid access point defined. Define one in Web settings.?

A: Insert the correct browser settings. Contact your service

provider for instructions.

Log

Q: Why does the log appear empty?

A: You may have activated a filter, and no communication

events fitting that filter have been logged. To see all events,

select Connect. > Log > Options > Filter > All

communication.

Q: How do I delete my log information?

A: Select Connect. > Log > Options > Clear log or go to

Settings > Log duration > No log. These will erase the log

contents, recent calls register, and message delivery

reports permanently.

PC connectivity

Q: Why do I have problems in connecting the phone to my PC?

A: Make sure that Nokia PC Suite is installed and running on

your PC. See the User Guide for Nokia PC Suite on the

CD-ROM. If Nokia PC Suite is installed and running, you

can use Nokia Get connected wizard available in Nokia PC

Suite to connect to your PC. For further information on

how to use Nokia PC Suite, see the help function on Nokia

PC Suite or visit the support pages at www.nokia.com.

Access codes

Q: What is my password for the lock, PIN, or PUK codes?

A: The default lock code is 12345. If you forget or lose the lock

code, contact your phone dealer.

If you forget or lose a PIN or PUK code, or if you have not

received such a code, contact your network service

provider.

Troubleshooting

121

For information about passwords, contact your access

point provider, for example, a commercial Internet service

provider (ISP), service provider, or network operator.

Application not responding

Q: How do I close an application that is not responding?

A: Open the application switching window by pressing and

holding . Then scroll to the application, and press to

close the application.

Phone display

Q: Why do missing, discolored, or bright dots appear on the

screen every time I turn on my phone?

A: This is a characteristic of this type of display. Some displays

may contain pixels or dots that remain on or off. This is

normal, not a fault.

Memory low

Q: What can I do if my phone memory is low?

A: You can delete the following items regularly to avoid

memory getting low:

• Messages from Inbox, Drafts, and Sent folders in

Messaging

• Retrieved e-mail messages from the phone memory

• Saved browser pages

• Images and photos in Gallery

To delete contact information, calendar notes, call timers, call

cost timers, game scores, or any other data, go to the

respective application to remove the data. If you are deleting

multiple items and any of the following notes are shown: Not

enough memory to perform operation. Delete some data

first. or Memory low. Delete some data., try deleting items

one by one (starting from the smallest item).

Q: How can I save my data before deleting it?

A: Save your data using one of the following methods:

• Use Nokia PC Suite to make a back up copy of all data to

a compatible computer.

• Send images to your e-mail address, and then save the

images to your computer.

• Send data using a Bluetooth connection to a compatible

device.

• Store data on a compatible memory card.

Troubleshooting

122

Enhancements

123

Enhancements

If you want to enhance phone

functionality, a range of

enhancements is available for

you. You can select any of these

items to help accommodate your

specific communication needs.

For availability of these and

other enhancements, contact

your dealer. Protective carrying cases and straps for your Nokia

XXXX mobile phone are available for purchase and can be

located at www.nokiausa.com.

Check the model number of any charger before use with this

device. This device is intended for use when supplied with

power from DC-4, AC-3 and AC-4 chargers, and from ACP-

12 and LCH-12 chargers when used with the charging

adapter CA-44.

Warning: Use only batteries, chargers and

enhancements approved by Nokia for use with

this particular model. The use of any other types

may invalidate any approval or warranty, and may

be dangerous. For availability of approved

enhancements, please check with your dealer.

Your device and its enhancements may contain small parts.

Keep them out of reach of small children.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of

small children.

• When you disconnect the power cord of any accessory or

enhancement, grasp and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle

are mounted and are operating properly.

• Installation of any complex car enhancements must be

made by qualified personnel only.

Power

• Battery, 900 mAh, Li-ion (BL-5B)

• Travel chargers (DC-4, AC-3, and AC-4)

• Mobile charger ()

Data

• Connectivity Cable (DKU-2, CA-53)

• Wireless Keyboard (SU-8W)

• MultiMediaCard

• MU-1 (64MB)

• MU-2 (128MB)

• MU-9 (256MB)

• MU-12 (512MB)

• Wireless GPS Module (LD-1W)

Enhancements

124

Audio

•Wireless Boom Headset (HS-4W)

• Wireless Headset (HDW-3)

• Wireless Clip-on Headset (HS-21W)

• Wireless Image Headset (HS-13W)

• Headset (HS-5)

• Boom Headset (HDB-4)

• Fashion Stereo Headset (HS-3)

• Stereo Headset (HDS-3)

• Music Stand (MD-1)

• Audio Adapter (AD-15)

• Inductive Lopset (LPS-4)

• TTY Adapter (HDA-10)

Accessibility

• Inductive Lopset (LPS-4)

• TTY Adapter (HDA-10)

Car

• Wireless Plug-in Car Handsfree (HF-6W)

• Mobile Charger (DC-4)

• Wireless Car Kit (CK-1W)

• Headrest Handsfree (BHF-3)

• Plug-in Car Handsfree (HF-3)

• Advanced Car Kit (CK-7W)

Imaging and lifestyle

• Nokia Remote Camera (PT-6)

Battery information

125

Battery information

Charging and discharging

Your device is powered by a rechargeable battery. The full

performance of a new battery is achieved only after two or

three complete charge and discharge cycles. The battery can

be charged and discharged hundreds of times but it will

eventually wear out. When the talk and standby times are

noticeably shorter than normal, buy a new battery. Use only

Nokia approved batteries, and recharge your battery only with

Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device

when not in use. Do not leave the battery connected to a

charger. Overcharging may shorten its lifetime. If left unused,

a fully charged battery will lose its charge over time.

Temperature extremes can affect the ability of your battery to

charge.

If the battery is completely discharged, it may take a few

minutes before the charging indicator appears on the display

or before any calls can be made.

Use the battery only for its intended purpose. Never use any

charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting

can occur when a metallic object such as a coin, clip, or pen

causes direct connection of the positive (+) and negative (-)

terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a

spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed

car in summer or winter conditions, will reduce the capacity

and lifetime of the battery. Always try to keep the battery

between 59°F and 77°F (15°C and 25°C). A device with a hot

or cold battery may not work temporarily, even when the

battery is fully charged. Battery performance is particularly

limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode.

Batteries may also explode if damaged. Dispose of batteries

according to local regulations. Please recycle when possible.

Do not dispose as household waste.

The BL-5B battery provides up to X hours of talk time and up

to X days of standby time. Operation times are estimates and

may vary depending on network conditions, charging, and

device use.

Nokia battery authentication

guidelines

Always use original Nokia batteries for your safety. To check

that you are getting an original Nokia battery, purchase it

from an authorized Nokia dealer, look for the Nokia Original

Battery information

126

Enhancements logo on the packaging and inspect the

hologram label using the following steps:

Successful completion of the four steps is not a total

assurance of the authenticity of the battery. If you have any

reason to believe that your battery is not an authentic original

Nokia battery, you should refrain from using it and take it to

the nearest authorized Nokia service point or dealer for

assistance. Your authorized Nokia service point or dealer will

inspect the battery for authenticity. If authenticity cannot be

verified, return the battery to the place of purchase.

Authenticate hologram

1 When looking at the hologram on

the label, you should see the

Nokia connecting hands symbol

from one angle and the Nokia

Original Enhancements logo

when looking from another angle.

2 When you angle the hologram

left, right, down, and up, you

should see 1, 2, 3, and 4 dots on

each side respectively.

3 Scratch the side of the label to

reveal a 20-digit code, for example

12345678919876543210. Turn

the battery so that the numbers

are facing upwards. The 20-digit

code reads starting from the

number at the top row followed by

the bottom row.

4 Confirm that the 20-digit code is

valid by following the instructions

at www.nokia.com/batterycheck.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the

hologram on the label is an authentic Nokia battery, please do

not use the battery. Take it to the nearest authorized Nokia

service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and

may result in poor performance and damage to your device

and its enhancements. It may also invalidate any approval or

warranty applying to the device.

To find out more about original Nokia batteries, visit

www.nokia.com/battery.

Care and maintenance

127

Care and maintenance

Your device is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will

help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity and all types of

liquids or moisture can contain minerals that will corrode

electronic circuits. If your device does get wet, remove the

battery and allow the device to dry completely before

replacing it.

• Do not use or store the device in dusty, dirty areas. Its

moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures

can shorten the life of electronic devices, damage

batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device

returns to its normal temperature, moisture can form

inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed

in this guide.

• Do not drop, knock, or shake the device. Rough handling

can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts

and prevent proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as

camera, proximity sensor, and light sensor lenses).

• Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications, or

attachments could damage the device and may violate

regulations governing radio devices.

• Use chargers indoors.

• Always create a backup of data you want to keep (such as

contacts and calendar notes) before sending your device

to a service facility.

All of the above suggestions apply equally to your device,

battery, charger, or any enhancement. If any device is not

working properly, take it to the nearest authorized service

facility for service.

Additional safety information

128

Additional safety information

Your device and its enhancements may contain small parts.

Keep them out of the reach of small children.

Operating environment

Remember to follow any special regulations in force in

any area and always switch off your device when its use

is prohibited or when it may cause interference or danger.

Use the device only in its normal operating positions. This

device meets RF exposure guidelines when used either in

the normal use position against the ear or when

positioned at least 1.5 cm (5/8 in) away from the body.

When a carry case, belt clip, or holder is used for body-

worn operation, it should not contain metal and should

position the device the above-stated distance from your

body.

In order to transmit data files or messages, this device

requires a quality connection to the network. In some cases,

transmission of data files or messages may be delayed until

such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is

completed.

Parts of the device are magnetic. Metallic materials may be

attracted to the device, and persons with a hearing aid should

not hold the device to the ear with the hearing aid. Do not

place credit cards or other magnetic storage media near the

device, because information stored on them may be erased

Medical devices

Operation of any radio transmitting equipment, including

wireless phones, may interfere with the functionality of

inadequately protected medical devices. Consult a physician or

the manufacturer of the medical device to determine if they

are adequately shielded from external RF energy or if you have

any questions. Switch off your device in health care facilities

when any regulations posted in these areas instruct you to do

so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Pacemakers Pacemaker manufacturers recommend that a

minimum separation of 15.3 cm (6 in) be maintained between

a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are

consistent with the independent research by and

recommendations of Wireless Technology Research. To

minimize the potential for interference, persons with

pacemakers should:

• Always keep the device more than 15.3 cm (6 in) from their

pacemaker when the device is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker.

Additional safety information

129

If you have any reason to suspect that interference is taking

place, switch off your device immediately.

Hearing aids Some digital wireless devices may interfere

with some hearing aids. If interference occurs, consult your

service provider.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles such as

electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag

systems. For more information, check with the manufacturer

or its representative of your vehicle or any equipment that has

been added.

Only qualified personnel should service the device, or install

the device in a vehicle. Faulty installation or service may be

dangerous and may invalidate any warranty that may apply to

the device. Check regularly that all wireless device equipment

in your vehicle is mounted and operating properly. Do not store

or carry flammable liquids, gases, or explosive materials in the

same compartment as the device, its parts, or enhancements.

For vehicles equipped with an air bag, remember that air bags

inflate with great force. Do not place objects, including

installed or portable wireless equipment in the area over the

air bag or in the air bag deployment area. If in-vehicle wireless

equipment is improperly installed and the air bag inflates,

serious injury could result.

Using your device while flying in aircraft is prohibited. Switch

off your device before boarding an aircraft. The use of wireless

teledevices in an aircraft may be dangerous to the operation

of the aircraft, disrupt the wireless telephone network, and

may be illegal.

Potentially explosive environments

Switch off your device when in any area with a potentially

explosive atmosphere and obey all signs and instructions.

Potentially explosive atmospheres include areas where you

would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting

in bodily injury or even death. Switch off the device at

refuelling points such as near gas pumps at service stations.

Observe restrictions on the use of radio equipment in fuel

depots, storage, and distribution areas, chemical plants or

where blasting operations are in progress. Areas with a

potentially explosive atmosphere are often but not always

clearly marked. They include below deck on boats, chemical

transfer or storage facilities, vehicles using liquefied

petroleum gas (such as propane or butane), and areas where

the air contains chemicals or particles such as grain, dust or

metal powders.

Emergency calls

Important: Wireless phones, including this device,

operate using radio signals, wireless networks, landline

networks, and user-programmed functions. Because of

Additional safety information

130

this, connections in all conditions cannot be guaranteed.

You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call:

1If the device is not on, switch it on. Check for adequate

signal strength.

Some networks may require that a valid SIM card is

properly inserted in the device.

2Press as many times as needed to clear the display

and ready the device for calls.

3Enter the official emergency number for your present

location. Emergency numbers vary by location.

4Press the key.

If certain features are in use, you may first need to turn those

features off before you can make an emergency call. Consult

this guide or your service provider for more information.

When making an emergency call, give all the necessary

information as accurately as possible. Your wireless device

may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

Warning: In the offline profile you cannot make (or

receive) any calls, except make calls to certain emergency

numbers, or use other features that require network

coverage.

Warning: You cannot make emergency calls in the

Imaging mode, because the keypad is not active. To make

an emergency call, activate the Fold open mode.

Certification information (SAR)

THE NOKIA N90-1 DEVICE MEETS THE GOVERNMENT'S

REQUIREMENTS FOR EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is

designed and manufactured not to exceed the limits for

exposure to radio frequency (RF) energy recommended by

international guidelines (ICNIRP). These limits establish

permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by

independent scientific organizations through periodic and

thorough evaluation of scientific studies. The standards and

guidelines include a substantial safety margin designed to

assure the safety of the public, regardless of age and health and

to account for any variations in measurements..

The exposure guidelines for mobile devices employ a unit of

measurement known as the Specific Absorption Rate or SAR.

The SAR limit stated in the international guidelines is 2.0

watts/kilogram (W/kg) averaged over ten grams of tissue. Tests

for SAR are conducted using standard operating positions with

the device transmitting at its highest certified power level in

all tested frequency bands. The actual SAR level of an

operating device can be well below the maximum value

because the device is designed to use only the power required

to reach the network. That amount changes depending on a

number of factors such as how close you are to a network base

station. The highest SAR value when tested according to

international testing procedures for use at the ear for device

type RM-42 is 0.29 W/kg. Your phone’s device type is listed on

the label located under the battery.

Additional safety information

131

SAR values may vary depending on national reporting and

testing requirements and the network band. Use of device

accessories and enhancements may result in different SAR

values. Additional SAR information may be provided under

product information at www.nokia.com.

USA and Canada: The SAR limit of USA (FCC) and Canada (IC)

is 1.6 W/kg averaged over one gram of tissue. Device type

RM-42 has also been tested against this SAR limit. The highest

SAR value reported under this standard during product

certification for use at the ear is 0.22 W/kg and when properly

worn on the body is 0.54 W/kg. Information about this device

can be found on the FCC's website at <http://www.fcc.gov/

oet/fccid> by searching the equipment authorization system

using FCC ID: QURRM-42.

Additional safety information

132

Technical Information

Feature Specification

Weight 6.1 oz (173 g) with BL-5B Li-Ion Battery

Size Size Volume: 7.69 in3 (126 cm3)

Length: 4.42 in (112.31 mm)

Width: 2.05 in (51.98 mm)

Thickness: 0.96 in (24.45 mm)

Frequency range GSM 900

880–915 MHz (TX)

925–960 MHz (RX)

GSM 1800

1710–1785 MHz (TX)

1805–1880 MHz (RX)

GSM 1900

1850–1910 MHz (TX)

1930–1990 MHz (RX)

WCDMA

1920-1980

2110-2170

Transmitter output power Up to 2 W

Battery voltage 3.7 V dc

Operating temperature 14°F to + 131°F (15°C to + 25°C)

Microsoft RM-42 GSM 900/1800/1900 Cellular Telephone W/BT User Manual

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone W/BT

Contents

Manaul

Navigation menu

Namespaces

Views

Navigation