Microsoft RM-42 GSM 900/1800/1900 Cellular Telephone W/BT User Manual

Download:
Mirror Download [FCC.gov]
Document ID	539937
Application ID	m/waLfw4rHN/O1Q/aAKc0g==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	160.62kB (2007701 bits)
Date Submitted	2005-05-05 00:00:00
Date Available	2005-05-05 00:00:00
Creation Date	2005-04-25 17:22:52
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-04-25 17:22:52
Document Title	untitled

DRAFT EN
923xxxx
Nokia XXXX User Guide
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights
reserved.
This product includes software licensed from Symbian Software Ltd (c) 19982005. Symbian and Symbian OS are trademarks of Symbian Ltd.
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole
responsibility that the product RM-42 is in conformity
with the provisions of the following Council Directive:
1999/5/EC. A copy of the Declaration of Conformity
can be found at http://www.nokia.com/phones/
declaration_of_conformity/
Part No. 923xxxx, Issue NO. 1
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, the Nokia Original Enhancements logos, Nokia
xxxx, and Pop-Port are trademarks or registered trademarks of Nokia Corporation.
Other product and company names mentioned herein may be trademarks or
tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
Export Controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC / INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
The information contained in this user guide was written for the Nokia xxxx. Nokia
operates a policy of ongoing development. Nokia reserves the right to make
changes to any of the products described in this document without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable
law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior
notice.
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
(C) 1997-2005. Tegic Communications, Inc. All rights reserved.
MPEG-4
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and non-commercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and non-commercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information including that relating to
promotional, internal and commercial uses may be obtained from MPEG LA, LLC.
See .
5378935
5396653
5400949
5408504
5410733
5416435
5420552
5428602
5430740
5432473
5437056
5444816
5446364
5450487
5471655
5473284
5479476
5479481
5485635
5487084
5490235
5491718
5493255
5493701
5524288
5534878
5537557
5564074
5565821
5566201
5568545
5570369
5574985
4868846
4945633
4969192
5012208
5016851
5045973
5059131
5127844
5128965
5168982
5173927
5200997
5218270
5229701
5230091
5241583
5267234
5270666
5271056
5289059
5292259
5293139
5307371
5311179
5313661
5317283
5319525
5331638
5350956
5351235
5357222
5361459
5365119
5722074
5715522
5712845
5706285
5706110
5701392
5699482
5697074
5692105
5692032
5678224
5678192
5669069
5664053
5664004
5652748
5640395
5638034
5634197
5633913
5625274
5621367
5613235
5606548
5603103
5598125
5597102
5596571
5594948
5590415
5590160
5581244
5577024
5821735
5819165
5812835
5809115
5809018
5806003
5805301
5805084
5802465
5797102
5796757
5793744
5787357
5787341
5786703
5779115
5761245
5760568
5758278
5754976
5754595
5752172
5752165
5748720
5740129
5737410
5737323
5734683
5732831
5729541
5729534
5726981
5726593
5907480
5905235
5901353
5898925
5898775
5896369
5895884
5893060
5892475
5890005
5889770
5887266
5884190
5884176
5884103
5870683
5862489
5862178
5859843
5857151
5850607
5845219
5842141
5841774
5839059
5838672
5835889
5835862
5835858
5832524
5832381
5827082
5826191
5966378
5966374
5963901
5963634
5960389
5960354
5956633
5956625
5956332
5956323
5953665
5946651
5946634
5946326
5945952
5944844
5941978
5940790
5936979
5930233
5926147
5926138
5924038
5924026
5920826
5920812
5920619
5918049
5917907
5915440
5914690
5912885
5907796
Manufactured or sold under one or more following US Patents.
6047181
6044264
6043760
6041235
6041234
6041120
6038695
6038238
6035201
6035194
6035189
6031827
6029128
6028567
6026161
6023740
6018277
6014573
6014113
6011971
6011853
6009328
6009127
6005857
5999523
5991716
5991627
5987639
5987406
5987406
5987137
5977887
5970059
6111944
6109972
6108323
6107986
6107743
6105784
6098194
6097964
6097961
6094661
6094587
6094426
6091955
6091440
6088746
6088342
6085605
6084920
6084868
6081732
6081534
6078570
6076181
6075789
6073001
6072787
6060193
6058317
6055439
6052385
6050415
6049796
6047196
6167038
6164547
6163708
6163546
6154457
6154455
6151507
6151485
6148209
6148103
6145095
6144709
6144676
6144660
6144243
6141410
6140966
6137836
6137789
6134439
6130650
6128509
6128322
6125267
6122498
6121846
6119180
6119003
6119002
6118775
6115617
6112099
6112078
6223059
6223037
6222924
6222730
6209173
6209050
6208961
6205172
6204830
6204727
6202163
6202109
6201974
6201876
6201818
6199035
6198928
6195338
6192238
6192055
6188909
6185302
6184592
6178535
6175623
6173302
6173301
6172673
6171127
6170073
6167273
6167256
6167248
6307512
6304652
6301338
6300887
6298035
6295286
6292669
6286122
6285889
6285888
6285884
6282436
6278688
6275708
6274825
6271794
6269331
6269126
6266516
6266330
6266321
6265928
6262735
6259676
6259323
6259312
6253089
6249584
6243582
6243455
6240079
6240076
6229996
6366659
6365854
6363259
6363252
6359904
6359865
6356766
6356759
6356468
6351842
6351647
6351470
6350133
6347945
6347218
6347138
6343131
6341221
6341220
6333716
6327256
6327153
6324389
6324281
6324074
6321257
6321083
6320330
6317588
6317083
6314683
6308084
6308066
6427078
6418326
6417817
6415410
6415163
6408063
6407532
6400958
6397081
6397074
6396878
6393518
6393260
6393121
6393008
6392605
6392503
6385451
6385446
6385054
6381468
6381453
6377817
6377803
6374118
6374083
6370591
6370391
6370390
6370389
6370367
6370362
6369635
6222924
6470313
6469673
6466585
6466033
6465896
6463502
6463278
6463262
6461193
6456826
6456237
6455188
6453179
6452914
6449480
6449473
6449264
6445932
6445928
6445924
6442386
6441689
6441591
6439905
6438370
6438229
6437711
6434133
6430721
6430189
6430163
6429746
4
6539236
6542170
6542606
6542931
6546251
6549773
6550927
6553065
6553107
6556550
6556824
6560458
6560460
6563801
6567389
6570596
6570860
6570909
6570933
6571095
6574336
6574473
6577204
6577619
6580920
6580932
6582147
6584089
6584161
6584164
6584314
6587680
6587695
6473016
6473594
6473611
6473622
6477151
6480485
6480715
6483051
6487288
6487397
6487424
6493564
6497364
6498785
6501957
6501967
6504595
6507590
6510148
6512756
6516193
6519241
6522670
6522877
6526290
6529561
6529717
6532226
6532227
6532257
6535979
6538449
6538613
6639950
6639905
6636491
6633768
6633618
6633536
6629130
6628731
6625458
6625452
6622011
6621910
6615169
6615044
6614905
6614860
6611693
6611507
6606593
6606508
6603773
6600663
6597917
6597914
6597319
6594486
6594472
6593914
6591116
6587817
6587695
6587680
6584314
6680913
6678531
6678527
6678368
6678361
6675012
6674860
6674733
6671511
6671495
6671287
6671286
6668162
6667963
6665692
6665309
6665289
6665284
6664844
6662986
6662155
6661780
6661404
6658256
6658064
6654589
6650905
6647249
6647248
6647006
6646998
6646841
6643513
6735249
6728555
6728548
6728241
6724944
6724892
6721871
6721867
6721700
6721374
6721304
6718179
6717928
6717925
6714784
6714091
6711689
6711211
6708028
6707428
6697624
6697604
6697347
6694141
6694135
6693892
6691085
6690307
6687499
6683860
6681253
6681099
6680955
6813503
6813280
6810272
6807421
6801796
6801786
6792278
6792277
6791966
6788959
6788952
6788798
6788702
6782269
6778839
6778521
6775259
6775228
6771964
6771631
6771619
6766159
6763035
6763019
6763011
6760317
6751472
6751227
6748219
6748076
6744742
6741860
6738370
RE38539
6834184
6834181
6822585
6819923
6816832
6816729
6816719
6813638
Modes .....................................................................................19
Essential indicators.............................................................21
Attach the wrist strap........................................................22
Configure settings...............................................................22
Nokia support on the Web................................................22
Help .........................................................................................22
Your phone .............................................. 19
Profiles—Set tones...............................................................15
Transfer content from another phone...........................16
Change the look of your phone.......................................16
Active standby mode ..........................................................17
Personalize your phone .......................... 14
Accessibility solutions........................................................12
Register your phone............................................................12
Copyright protection ..........................................................12
Updates ..................................................................................12
Find information about your device...............................13
Contact your service provider..........................................13
Welcome.................................................. 12
For your safety...........................................8
Contents
Imaging .....................................................57
Camera ................................................................................... 41
Gallery .................................................................................... 53
Camera and Gallery .................................41
Save names and numbers ................................................. 37
Copy contacts....................................................................... 38
Add ringing tones for contacts ....................................... 39
Create contact groups ....................................................... 39
Contacts (Phonebook) .............................37
Voice calls ............................................................................. 27
Video calls ............................................................................. 29
Video sharing ...................................................................... 30
Answer or reject a call....................................................... 33
Log........................................................................................... 35
Make calls ................................................27
Clock ....................................................................................... 23
Volume and loudspeaker control .................................... 24
File manager ......................................................................... 24
Memory card tool................................................................ 25
Access the Web ................................................................... 81
Bookmarks view................................................................... 82
Make a connection............................................................. 82
Browse.................................................................................... 83
Download and purchase items........................................ 85
Web...........................................................81
Create calendar entries ..................................................... 78
Calendar views..................................................................... 79
Remove calendar entries................................................... 79
Calendar settings ................................................................ 80
Calendar....................................................78
Write text.............................................................................. 64
Write and send messages ................................................. 66
Inbox—receive messages................................................... 69
My folders ............................................................................ 70
Mailbox .................................................................................. 70
Outbox—messages waiting to be sent .......................... 73
View messages on a SIM card ......................................... 73
Messaging settings............................................................. 73
Messaging.................................................63
Image print ........................................................................... 57
RealPlayer™........................................................................... 58
Movie Director director..................................................... 60
Settings................................................................................105
Cover display settings......................................................115
Voice commands ...............................................................115
Application manager........................................................115
Activation keys—handle copyright-protected files .118
Tools....................................................... 105
Bluetooth connection ........................................................ 97
PC connections ..................................................................100
Connection manager........................................................101
Remote synchronization .................................................102
Device manager.................................................................103
Connectivity .............................................97
Go to—add shortcuts.......................................................... 90
IM—Instant messaging (chat) ........................................ 90
My own.....................................................90
Calculator.............................................................................. 87
Converter............................................................................... 87
To-do ...................................................................................... 88
Notes ...................................................................................... 88
Recorder................................................................................. 89
Office........................................................87
End a connection ................................................................ 85
Web settings......................................................................... 85
Index ...................................................... 133
Additional safety information............. 128
Care and maintenance ......................... 127
Charging and discharging.............................................. 125
Nokia battery authentication guidelines................... 125
Battery information.............................. 125
Power ................................................................................... 123
Data...................................................................................... 123
Audio.................................................................................... 124
Accessibility ....................................................................... 124
Car......................................................................................... 124
Imaging and lifestyle....................................................... 124
Enhancements ....................................... 123
Q&A...................................................................................... 119
Troubleshooting .................................... 119
8
WATER-RESISTANCE Your phone is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make
back-up copies or keep a written record of all
important information.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Do not touch the antenna
unnecessarily.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the phone where
blasting is in progress.
SWITCH OFF WHEN REFUELING Do not use
the phone at a refuelling point. Do not use near
fuel or chemicals.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the phone off near
medical equipment.
INTERFERENCE All wireless phones may be
susceptible to interference, which could affect
performance.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
SWITCH ON SAFELY Do not switch the
phone on when wireless phone use is
prohibited or when it may cause interference
or danger.
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
For your safety
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
When taking and using images or video clips, obey all laws
and respect local customs as well as privacy and legitimate
rights of others.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
The wireless device described in this guide is approved for
use on the EGSM 900/1800/1900 and UMTS 2000
networks. Contact your service provider for more
information about networks.
About your device
EMERGENCY CALLS Ensure the phone
function of the phone is switched on and in
service. The keypad is active only in the Fold
open mode. Press
as many times as
needed to clear the display and return to the
start screen. Enter the emergency number,
then press
. Give your location. Do not end
the call until given permission to do so.
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this device,
such as MMS, browsing, e-mail and content downloading
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order and
icons. Contact your service provider for more information.
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use network services. For
instance, some networks may not support all languagedependent characters and services. Network features are
designated in this guide by .
Network Services
Do not switch the device on when wireless device use
may cause interference or danger.
10
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
The battery intended for use with this device is BL-5B.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from DC-4, AC-3 and AC-4 chargers, and from
ACP-12 and LCH-12 chargers when used with the
charging adapter CA-44.
Always switch the device off and disconnect the charger
before removing the battery.
Enhancements, batteries, and
chargers
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
using browser or over MMS, require network support for
these technologies.
11
12
Welcome
Nokia is committed to making mobile devices easy to use
for all individuals, including those with disabilities. For
more information, visit www.nokiaaccessibility.com.
Accessibility solutions
Other features on your device are:
• Multimedia messaging. See “Messaging” on page 43.
• Instant messages. See “IM—instant messaging (chat)”
on page 74.
• RealPlayer™. See “RealPlayer™” on page 40.
• Bluetooth technology. See “Connectivity” on page 80.
• J2ME™ (Java 2 Platform, Micro Edition). See
“Application manager” on page 98.
• Web browser. See “Web” on page 61.
You can personalize your device with ringing tones and
themes. See "Personalize your phone," page 23.
Congratulations on your purchase of the Nokia xxxx
mobile device. Your device provides many functions that
are practical for daily use, such as a calendar, a clock, an
alarm clock, and messaging.
Welcome
From time to time, Nokia may update this guide to reflect
changes. The latest version may be available at
www.nokiausa.com. Also, an interactive tutorial may be
available at www.nokiausa.com.
Updates
Copyright protections may prevent some images, music
(including ringing tones) and other content from being
copied, modified, transferred, or forwarded.
Copyright protection
Make sure to register your phone at
www.warranty.nokiausa.com or 1-888-NOKIA-2U
(1-888-665-4228) so that we can serve your needs better
if you should need to call the center or have your device
repaired.
Register your phone
Service providers may differ in their support of features.
Before you sign up with a service provider, make sure that
the service provider supports the features that you need.
In many cases, the service provider will make available
descriptions of its services and instructions for using
features, such as the following:
• Voice mail and voice privacy
• Call waiting, call forwarding, and caller ID
• Messaging
• News and information services
• Selected Internet services
Contact your service provider
Information about your device is provided on the device
label, which is on the back of the device under the battery.
The label contains the model and serial numbers, as well as
the following:
• Device type (such as RM-58)
• Device model (such as Nokia 6682 device)
• International mobile equipment identity (IMEI)
• FCC ID number
Find information about your
device
13
Welcome
14
Personalize your phone
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device
may also have been specially configured for your network
provider. This configuration may include changes in menu
names, menu order and icons. Contact your service
provider for more information.
• To use the standby main display for fast access to your
most frequently used applications, see ‘Active standby
mode’, p. 17.
• To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your phone’,
p. 16, and ‘Cover display
settings’, p. 115.
• To customize the ringing
tones, see ‘Profiles—Set
tones’, p. 15.
• To change the shortcuts
assigned for the different
presses of the scroll key and left and right selection
keys in the standby mode, see ‘Standby mode’, p. 105.
Personalize your phone
•
•
•
•
•
•
•
The scroll key shortcuts are not available if the active
standby is on.
To change the clock shown in the standby mode, press
, and select Clock > Options > Settings > Clock
type > Analog or Digital.
To change the clock alarm tone, press , and select
Clock > Options > Settings > Clock Alarm tone and a
tone.
To change the calendar alarm tone, press , and select
Calendar > Options > Settings.
To change the welcome note to an image or animation,
press , and select Tools > Settings > Phone >
General > Welcome note or logo.
To assign an individual ringing tone to a contact, press
, and select Contacts. See ‘Add ringing tones for
contacts’, p. 39.
To assign a 1-touch dial to a contact, press a numbered
key in the standby mode (
is reserved for the voice
mailbox), and press
. Select Yes, then select a
contact.
To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
To create a new profile, select Options > Create new.
Tip! For information on how to change the alert tone
for the calendar or clock, see ‘Personalize your phone’,
p. 14.
Tip! When you choose a tone, Tone downloads opens
a list of bookmarks. You can select a bookmark and
start connection to a Web page to download tones.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Customize.
Scroll to the setting you want to change, and press
to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list and
listen to each one before you make your selection. Press
any key to stop the sound.
To change the profile, press
in the standby mode.
Scroll to the profile you want to activate, and select OK.
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles. If the
currently selected profile is other than Normal, the profile
name is shown at the top of the display in the standby
mode.
Profiles—Set tones
To leave the Offline profile, press , and select Tools >
Profiles, select another profile, and select Options >
Activate > Yes. The phone re-enables wireless
transmissions (providing there is sufficient signal
strength). If a Bluetooth connection is activated before
entering the Offline profile, it will be deactivated. A
Bluetooth connection is automatically reactivated after
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
Warning: In the offline profile you cannot make (or
receive) any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first
activate the phone function by changing profiles. If the
device has been locked, enter the lock code.
The Offline profile lets you use the phone without
connecting to the wireless network. When you activate
the Offline profile, the connection to the wireless network
is turned off, as indicated by in the signal strength
indicator. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Offline profile
15
Personalize your phone
16
Personalize your phone
To transfer content:
1 Press , and select Tools > Transfer on your Nokia
XXXX device. Follow the instructions on the screen.
Before starting the transfer, you must activate Bluetooth
connectivity on both phones. On each phone press
and select Connect. > Bluetooth. Select Bluetooth > On.
Give a name to each phone.
To avoid duplicate entries, you can transfer the same type
of information, for example, contacts, from the other
phone to your Nokia XXXX only once.
You can use your Nokia XXXX device without a SIM card.
The offline profile is automatically activated when the
phone is switched on without a SIM card. This allows you
to use the SIM card in another phone.
You can copy contacts, calendar, images, video, and sound
clips using a Bluetooth connection, from a compatible
Nokia Series 60 phone.
Transfer content from
another phone
leaving the Offline profile. See ‘Bluetooth connection
settings’, p. 97.
To change the look of your phone displays, such as the
wallpaper and icons, press , and select Tools > Themes.
The active theme is indicated by
. In Themes you can
group together elements from other themes or select
images from the Gallery to personalize themes further. The
Change the look of your
phone
Content is copied from the memory and memory card of
the other phone to your Nokia XXXX device and memory
card. Copying time depends on the amount of data to be
transferred. You can cancel copying and continue later. The
Transfer application is added to the main menu of the
other phone.
connectivity. When it has finished the search, select
your other phone from the list.
You are asked to enter a code on your Nokia XXXX
device. Enter a code (1-16 digits), and select OK. Enter
the same code on the other phone, and select OK.
The Transfer application is sent to the other phone as
a message.
Open the message to install Transfer on the other
phone, and follow the instructions on the screen.
From your Nokia XXXX device, select the content you
want to copy from the other phone.
2 The phone searches for devices with Bluetooth
To restore the selected theme back to its original settings,
select Options > Restore orig. theme when you edit a
theme.
To edit themes, scroll to a theme, and select Options > Edit
to change the following options:
• Wallpaper—The image to be shown as a background
image in the standby mode.
• Screen saver—The screen saver type on the main
display: date and time, or a text you have written
yourself. See also Screen saver timeout, p. 106.
• Image in ’Go to’—The background image for the Go to
application.
To preview a theme, scroll to it, and select Options >
Preview.
To activate a theme, scroll to it, and select Options >
Apply.
To open a browser connection and download more themes,
select Theme downloads.
See also ‘Cover display settings’, p. 115.
themes on the memory card are indicated by . The
themes on the memory card are not available if the
memory card is not inserted in the phone. If you want to
use the themes saved in the memory card without the
memory card, save the themes in the phone memory first.
The standard scroll key
shortcuts available in the
standby mode cannot be
used when the active standby mode is on.
To change the default applications shortcuts:
1 Press , select Tools > Settings > Phone > Standby
mode > Active standby apps., and press
2 Highlight a shortcut to an application, and select
Options > Change.
3 Select a new application from the list, and press .
Scroll to an application or
event, and press
The active standby display is
shown with default
applications across the top of
the screen, and calendar,
to-do, and player events
listed below.
Press , select Tools > Settings > Phone > Standby
mode > Active standby, and press
to switch the active
standby on or off.
Use your standby main display for fast access to your most
frequently used applications. By default, the active
standby mode is on.
Active standby mode
17
Personalize your phone
18
Personalize your phone
Some shortcuts may be fixed, and you are not able to
change them.
The Fold open mode is activated
even if the fold is not fully opened.
The fold opens close to 150
degrees, as shown in the picture.
Do not force the fold to open more.
When you open the fold, the Fold
open mode is activated
automatically: the main display
lights up, the keypad is available,
and you can access the menu. You
can scroll in the menu with the
scroll key or the joystick.
Calendar and clock alarms and notes for missed calls and
new received messages are also displayed. You can view
If the keypad is not locked, you can use the power key, the
joystick, and the capture key (for enhanced voice
commands). To select commands on the display, such as
Show and Back, move the joystick to highlight the desired
text, and press the joystick.
In the Fold closed mode, the cover display
provides limited functions. On the
standby mode display, the signal strength
and battery indicators, operator logo,
time information, status indicators, and the name of the
currently active profile (if other than Normal) may be
shown. If you are listening to a sound clip, volume bars
and track information are displayed.
When the fold of the phone is closed, the
main display is deactivated and the cover
display lights up. Ongoing calls are
ended, unless the loudspeaker is in use or
a headset is connected. If you are using
the player to listen to a sound clip, it
continues to play.
Your phone has four mechanical modes that support
different use situations: Fold closed, Fold open for using
the phone, Imaging for recording video and taking
pictures, and Camera for taking pictures. To switch
between the modes, turn the fold and the swing axis
camera. There is a short time-out before a mode is
activated.
Fold open mode
Fold closed mode
Modes
Your phone
19
Your phone
20
Your phone
To activate the Camera
mode, turn the swing axis
camera when the fold of
the phone is closed. The viewfinder appears on the cover
display. The camera unit turns 180 degrees
counterclockwise and close to 135 degrees clockwise. Do
not force the camera unit to turn more.
In the Camera mode, you
can take pictures quickly.
You can use the camera
during an active call. See
‘Camera and Gallery’, p.
41.
In the Imaging mode, you can record videos, take pictures,
edit video clips and images, and send live video during a
video call
. See ‘Camera and Gallery’, p. 41 and ‘Video
calls’, p. 29.
To activate the Imaging
mode, open the fold up to
90 degrees, hold the
phone sideways, and turn
the fold up so that the
main display faces you.
The camera starts, and you
can see the view to be
captured. You can also
turn the swing axis
Camera mode
Warning: You cannot make emergency calls in the
Imaging mode, because the keypad is not active. To make
an emergency call, activate the Fold open mode.
In the Imaging mode, the keypad is not active. You can use
the capture key, joystick, power key, the upper and lower
selection keys next to the main display, and
to end an
active call.
camera. In the Imaging mode, the camera unit turns 180
degrees counterclockwise and close to 135 degrees
clockwise. Do not force the camera unit to turn more.
Imaging mode
To make calls or use the menu, open the fold.
Incoming calls are indicated by their normal tone and a
note. To answer a call and use the handset, open the fold.
To answer a call and use the loudspeaker, select
Answer. If a headset is connected to the phone, press the
answer key on the headset.
received text messages and the text and image objects of
received multimedia messages on the cover display. To
view other types of messages, open the fold, and view the
message on the main display.
—All calls to the phone are forwarded to another
number. If you have two phone lines, the forwarding
—The second phone line is being used. See ‘Call
settings’, p. 106.
—You have an active clock alarm. See ‘Clock’, p. 23.
—The phone keypad is locked. See ‘Keypad lock
(Keyguard)’ in the Quick start guide.
—Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off. See ‘Profiles—Set tones’, p. 15.
—You have missed calls. See ‘Recent calls’, p. 35.
—There are messages waiting to be sent in the Outbox
folder. See ‘Outbox—messages waiting to be sent’, p. 73.
—You have received one or several messages to the
Inbox folder in Messaging.
(network service)—The phone is being used in a UMTS
network. See ‘Network’, p. 114.
—The phone is being used in a GSM network.
Essential indicators
You can use the capture key, joystick, and power key in the
Camera mode.
and for the second
—A USB connection is active.
—Data is being transmitted using a Bluetooth
connection. See ‘Bluetooth connection’, p. 97.
—Bluetooth connectivity is On.
—A UMTS packet data connection is on hold.
—A UMTS packet data connection is active.
—A UMTS packet data connection is available.
—A GPRS or EDGE packet data connection is on hold.
These icons are shown instead of the signal strength
indicator (shown in the top left corner in the standby
mode). See ‘Packet data connections in GSM and UMTS
networks’, p. 108.
—A GPRS or EDGE packet data connection is active.
—A GPRS or EDGE packet data connection is available.
—A data call is active.
—The connection to a headset with Bluetooth has been
lost.
—A car kit with Bluetooth is connected to the phone.
—A loopset is connected to the phone.
—A headset is connected to the phone.
indicator for the first line is
21
Your phone
22
Your phone
You may have settings from your service providers already
installed in your phone, or you may receive the settings
from the service providers as a special text message. See
‘Data and settings’, p. 69. For more information on the
availability of the settings, contact your network operator,
service provider, nearest authorized Nokia dealer, or visit
the support area on the Nokia website, www.nokia.com/
support.
To use multimedia messaging, GPRS, Internet, and other
wireless services, you must have the proper configuration
settings on your phone.
Configure settings
Thread the strap as shown in the
picture, and tighten it.
Attach the wrist strap
—You have an e-mail that has not been read, waiting
for you to retrieve to your phone.
—You have an e-mail that has been read, waiting for
you to retrieve to your phone.
To open help from the main menu, select Tools > Help.
Select the desired application to view a list of help topics.
To search for help topics using keywords, select Options >
Search by keyword.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
Example: To view instructions on how to create a
contact card, start to create a contact card, and select
Options > Help.
When an application is open, to access help for the current
view, select Options > Help.
Your phone has context-sensitive help. You can access the
help from an application or from the main menu.
Help
Check www.nokia.com/support or your local Nokia Web
site for the latest version of this guide, additional
information, downloads, and services related to your Nokia
product.
Nokia support on the Web
, and select Clock.
To cancel an alarm, select Clock > Options > Remove
alarm.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To turn off the alarm, select Stop. When the alarm tone
sounds, press any key, or select Snooze to stop the alarm
for five minutes, after which it resumes. You can do this a
maximum of five times.
To set a new alarm, select Options > Set alarm. Enter the
alarm time, and select OK. When the alarm is active, the
indicator is shown.
Press
Clock
When you are reading a help topic, to view other related
topics, press
or
To add cities to the list, select Options > Add city. Enter
the first letters of the city name. The search field appears
automatically, and the matching cities are displayed.
Open Clock, and press
to open the world clock view.
In the world clock view, you can view the time in different
cities.
World clock
To change the daylight-saving time status, scroll down,
and select Daylight-saving. Select On to add one hour to
the My current city time. See ‘World clock’, p. 23. When
the daylight-saving is active, the
indicator is shown in
the clock main view.
To change the alarm tone, scroll down, and select Clock
alarm tone.
To allow the mobile phone network to update the time,
date, and time zone information to your phone
, scroll
down, and select Auto time update. For the Auto time
update setting to take effect, the phone restarts.
To change the clock shown in the standby mode, scroll
down, and select Clock type > Analog or Digital.
To change the clock settings, select Options > Settings in
the clock.
Clock settings
23
Your phone
24
Your phone
To use the loudspeaker during a call, start a call, and select
Options > Activate loudsp..
Icons in File mgr.:
Folder
Folder that has a subfolder
To move or copy files to a folder, press
and
at the
same time to mark a file, and select Options > Move to
folder or Copy to folder.
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
To locate the loudspeaker, see ‘Keys and parts’ in the
Quick start guide.
To browse files and folders in the phone memory or on a
memory card (if inserted), press , and select Tools > File
mgr.. The phone memory view (
) opens. Press
to
open the memory card view (
).
Many features of the phone use memory to store data.
These features include contacts, messages, images, ringing
tones, calendar and to-do notes, documents, and
downloaded applications. The free memory available
depends on how much data is already saved in the phone
memory. You can use a memory card as extra storage
space. Memory cards are rewritable, so you can delete and
save data on a memory card.
File manager
To turn off the loudspeaker when you have an active call
or are listening to a sound, select Options > Activate
handset.
The built-in loudspeaker allows you to speak and listen to
the phone from a short distance without having to hold
the phone to your ear, for example, having it on a table
nearby. Sound applications use the loudspeaker by
default.
To increase or decrease the volume
level, when you have an active call or
are listening to a sound, press
or
, respectively, or move the joystick right or left.
Volume and loudspeaker control
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your phone is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Select a city. You can add a maximum of 15 cities to the
list.
The phone notifies you if the phone memory or memory
card memory is getting low.
Memory low—free memory
To view the amount of free
memory on the memory card,
if you have a card inserted in
the phone, press
to open the memory card view, and
select Options > Memory details.
To view what types of data
you have in the phone and
how much memory the
different data types consume,
select Options > Memory
details. Scroll down to Free
memory to view the amount
of free memory in the phone.
Memory card tool
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the phone memory
• Saved Web pages
• Saved images, videos, or sound files
• Contact information
• Calendar notes
• Downloaded applications. See also ‘Application
manager’, p. 115.
• Any other data that you no longer need
Tip! To free memory from the phone or from the
memory card, use Image Store available in Nokia PC
Suite to transfer images and video clips to a
compatible PC. See the CD-ROM supplied in the sales
package.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the different memories in your
phone. See the CD-ROM supplied in the sales package.
View memory consumption
To free phone memory, transfer data to a memory card in
the file manager. Mark files to be moved, select Move to
folder > Memory card, and a folder.
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
25
Your phone
26
Your phone
Important: Do not remove the MMC card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
You cannot use the memory card if the door of the
memory card slot is open.
Press , and select Tools > Memory. You can use a
memory card as extra storage space. It is also good to
regularly back up the information in the phone memory to
the memory card. The information can be restored to the
phone later. See ‘Inserting the memory card’ in the Quick
start guide.
Keep all memory cards out of the reach of small children.
Use only compatible Multimedia cards (MMC) with this
device. Other memory cards, such as Secure Digital (SD)
cards, do not fit in the MMC card slot and are not
compatible with this device. Using an incompatible
memory card may damage the memory card as well as the
device, and data stored on the incompatible card may be
corrupted.
Note: This device uses a Reduced Size Dual Voltage
(1.8/3V) MultiMediaCard (MMC). To ensure
interoperability, use only dual voltage MMCs. Check the
compatibility of an MMC with its manufacturer or
provider.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm. When formatting is complete,
enter a name for the memory card, and select OK.
Some memory cards are supplied pre-formatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
When a memory card is formatted, all data on the card is
permanently lost.
Format a memory card
Tip! To rename a memory card, select Options >
Memory card name.
To restore information from the memory card to the phone
memory, select Options > Restore from card.
To back up information from phone memory to a memory
card, select Options > Backup phone mem.
To call your voice mailbox ( ), press and hold
standby mode. See also ‘Call forwarding’, p. 113.
in the
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name; or enter the first
letters of the name to the search field. Matching contacts
are listed. Press
to call. Select the call type Voice call.
Pressing
always ends a call, even if another
application is active.
including the area code. Press
to remove a number.
For international calls, press
twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2 Press
to call the number.
3 Press
to end the call (or to cancel the call attempt).
1 In the standby mode, enter the phone number,
Tip! To increase or decrease the volume during a call,
press
or
. If you have set the volume to Mute,
you cannot adjust the volume with the scroll key. To
adjust the volume, select Unmute, and then press
or
Voice calls
Make calls
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
The phone supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The conference
call is put on hold on your phone. The other
3 When the new call is answered, to join the first
New call. The first call is automatically put on hold.
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
Make a conference call
To call a recently dialed number in the standby mode,
press
to access a list of the 20 last numbers you called
or attempted to call. Scroll to the number you want, and
press
to call the number.
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voice mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
27
Make calls
28
Make calls
Your phone supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the phone creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
Voice dialing
To call in the standby mode, press the 1-touch dial key
and
To assign a phone number to one of the 1-touch dialing
keys (
—
), press , and select Tools > 1-touch.
Scroll to the key to which you want to assign the phone
number, and select Options > Assign.
is reserved for
the voice mailbox.
To activate 1-touch dialing, press , and select Tools>
Settings > Call > 1-touch dialing > On.
1-touch dial a phone number
participants can still continue the conference call.
Once you have finished the private conversation,
select Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference>
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press
When you use voice dialing, the loudspeaker is in use. Hold
the phone at a short distance away when you say the voice
tag.
1 To start voice dialdialing, press and hold the capture
key. If you are using a compatible headset with the
headset key, press and hold the headset key to start
voice dialing.
2 A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3 The phone plays a synthesised voice tag for the
recognised contact in the selected phone language, and
displays the name and number. After a time-out of 1.5
seconds, the phone dials the number.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
Make a call with a voice tag
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesised
voice tag, open a contact card, and select Options > Play
voice tag.
it. The voice recognition in the phone adapts to the main
user’s voice to recognise the voice commands better.
Warning! You cannot make emergency calls in the
Imaging mode because the keypad is not active. To make
an emergency call, activate the Fold open mode.
To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
network operator or service provider. A video call can only
be made between two parties. The video call can be made
to a compatible mobile phone or an ISDN client. Video calls
cannot be made while there is another voice, video, or data
call active.
When you make a video call, you can see a real-time,
two-way video between you and the recipient of the call.
The live video image, or video image captured by the
camera in your phone is shown to the video call recipient.
Video calls
If several numbers are saved under the name, the phone
selects the default number, if it has been set. Otherwise
the phone selects the first available number of the
following: Mobile, Mobile (home), Mobile (work),
Telephone, Tel. (home), and Tel. (work).
If the recognised contact was not correct, select
#Other to view a list of other matches, or Quit to
cancel voice dialing.
The video call is active when you see two video images,
and hear the sound through the loudspeaker. The call
recipient may deny video sending (
), in which case you
hear the sound and may see a still image or a grey
background graphic.
Starting a video call may take a while. Waiting for image
is shown. If the call is not successful (for example, video
calls are not supported by the network, or the receiving
device is not compatible) you are asked if you want to try
a normal call or send a message instead.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your phone. To
send a still image instead, see ‘Call settings’, p. 106.
1 To start a video call, in the
Fold open mode, enter the
phone number in the
standby mode, or select
Contacts, and select a
contact.
2 Select Options > Call >
Video call.
3 Activate the Imaging mode
after the call recipient has
answered the call.
29
Make calls
30
Make calls
To end the video call, press
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video call.
Check the pricing with your network operator or
service provider.
If you activate the Fold open mode during a video call,
sending your own video image stops because the camera
is not active. You can, however, still see the video of the
recipient.
To switch the places of the sent video images on the
display, select Change image order.
To zoom your own image, select Zoom in or Zoom out.
The zoom indicator is shown on the top of the display.
To send live video image of yourself, turn the camera unit
so that the lens is facing you.
To change between showing video or hearing only sound,
select Enable/Disable > Sending video (Imaging mode
only), Sending audio or Sending audio & video (Imaging
mode only).
Tip! To increase or decrease the volume during a call,
in the Fold open mode, press
or
, or in the
Imaging mode, move the joystick left or right.
Because Video sharing requires a 3G Universal Mobile
Telecommunications System (UMTS) connection, your
ability to use Video sharing depends on 3G network
availability. Contact your service provider for questions
about network availability and fees associated with using
this application. To use Video sharing you must:
• Ensure that Video sharing is installed on your Nokia
phone.
Video sharing requirements
To stop Video sharing, return to the Fold open mode. Your
voice call continues normally.
The loudspeaker is active when you activate the Imaging
mode. You can also use a headset to continue your voice
call while you share video. When a voice call is active,
select Options > Video sharing > Live or Clip. Send an
invitation to the recipient, and activate the Imaging mode
to begin sharing.
Use Video sharing to send live video or a video clip from
your mobile device to another compatible mobile device
during a voice call. Simply invite a recipient to view the live
video, or a video clip you want to share, and activate the
Imaging mode. See ‘Imaging mode’, p. 20. Sharing begins
automatically when the recipient accepts the invitation.
Video sharing
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your phone before you can use
Person-to-person connection settings
Settings
• Ensure that your phone is set up for person-to-person
connections. See ‘Settings’, p.31.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 31. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. If you try to start Video sharing
when you are not within UMTS network coverage (for
example, in a GSM network), a message is displayed
that there is no 3G network coverage (the registration
cannot be made).
• Ensure that both the sender and recipient are
registered to the UTMS network. If you invite someone
to a sharing session and that person has his phone
turned off, is not within UMTS network coverage, or
their registration mode is When needed and they have
not started Video sharing, they do not know that you
are sending an invitation. However, you receive an error
message that the recipient cannot accept the
invitation.
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your phone UMTS access point connection
settings are configured properly. For help, see
‘Connection settings’, p. 107.
UTMS connection settings
If you know a recipient’s SIP address, you can enter it on
your contact card for that person. Open Contacts from
your phone main menu, and open the contact card (or
start a new card for that person). Select Options >Add
detail > Web address. Enter the SIP address in a format
sip:username@domainname (you can use an IP address
instead of a domain name).
Ask your network operator or service provider for the SIP
profile settings, and save them in your phone. Your
network operator or service provider may send you the
settings over the air or give you a list of the needed
parameters.
Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible phone. The SIP profile must also be established
to receive a sharing session.
31
Make calls
32
Make calls
To receive share invitations even when Video sharing is
closed, set the registration mode for the SIP settings to
Always on. If the registration mode is When needed, you
must start Video sharing before you can receive an
invitation.
1 Select Options > Video sharing > Live or Clip. Wait
until Registered to service is displayed.
The Invitation window opens.
If you selected Clip, a list of video clips opens. Select a
video clip you want to share, and select Options >
Send invitation.
2 Select the SIP address of the recipient to which you
want to send the invitation from the contacts list.
If the SIP address of the recipient is not available,
enter a SIP address.
3 Select OK to send the invitation. Sharing begins
automatically when the recipient accepts the
invitation, and you activate the Imaging mode.
4 Select Pause to pause the sharing session. Select
Continue to resume sharing.
To receive a sharing session, the recipient must install
Video sharing and configure the required settings on
their mobile device. You and the recipient must both be
registered to the service before you can start sharing. You
can see the registration status in the Video sharing main
view.
Share live video
To disconnect the session, return to the Fold open mode.
Sharing ended is displayed.
When you receive an invitation, you can select:
• Mute to stop any audible alerts triggered by the
invitation message.
• Accept, and activate the Imaging mode to begin the
sharing session.
• Mute and then Reject to decline the invitation. The
sender receives a message that you rejected the
invitation. You can also press the End key to decline the
sharing session and disconnect the voice call.
If someone sends you a share invitation and your phone is
turned off, you are not within UMTS network coverage, or
your registration mode is When needed and you have not
started Video sharing, you will not know that you received
an invitation.
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your phone is not set to Silent, it rings when you
receive an invitation.
Accept an invitation
mode. To end the voice call, press the End key.
5 To end the sharing session, return to the Fold open
When a video call arrives,
is displayed.
Answer or reject a video call
If you answer a voice call during a video call, the video call
is dropped. Call waiting is not available during a video call.
When you reject an incoming call, you can also send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can edit
the text before sending it. See also Reject call with SMS,
p. 106.
If you do not want to answer a call, press
to reject it.
The caller hears a line busy tone. If you have activated the
Call forward settings > If busy function to forward calls,
rejecting an incoming call also forwards the call. See ‘Call
forwarding’, p. 113.
Tip! If a compatible headset is connected to the
phone, to answer and end a call, press the headset key.
To mute the ringing tone when a call comes in, select
Silence.
To answer the call in the Fold open mode, press
. In the
Fold closed mode, open the fold, and the call starts
automatically. To answer a call, and use the loudspeaker in
the Fold closed mode, select Answer (
).
Answer or reject a call
to answer the video call.
To end the video call, in the Imaging mode or in the Fold
open mode, press
Note: Even if you have denied video sending during
a video call, the call will still be charged as a video call.
Check the pricing with your network operator or
service provider.
If you activate the Fold open mode during a video call,
sending your own video image stops because the camera
is not active. You can, however, still see the video of the
recipient.
Tip! To send video of yourself, in the Imaging mode
turn the camera unit so that the lens is facing you.
To start sending video, activate the Imaging mode, and a
live video image, recorded video clip, or the image being
captured by the camera in your phone is shown to the
caller. If you want to send a live video image, turn the
camera unit to the direction from which you want to send
the video image. If you do not activate the Imaging mode,
video sending is not activated, and you hear a sound. A
grey screen is shown in place of the video. To replace the
grey screen with a still image, see ‘Call settings’, Image in
video call, p. 106.
In the Fold open mode, press
Tip! You can assign a ringing tone for video calls.
Press
and select Profiles.
33
Make calls
34
Make calls
. The first call is put
Many of the options that you can use during a voice call
are network services. Select Options during a call for
some of the following options: Mute or Unmute, Answer,
Decline, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls, New call, Conference, and
Transfer. Select from the following:
Options during a voice call
To switch between the two calls, select Swap. Select
Options > Transfer to connect an incoming call or a call
on hold with an active call and to disconnect yourself
from the calls. To end the active call, press
. To end
both calls, select Options > End all calls.
To answer the waiting call, press
on hold.
Tip! To change the phone tones for different
environments and events, for example, when you want
your phone to be silent, see ‘Profiles—Set tones’, p. 15.
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
Call waiting
Select Options during a video call for the following
options: Hold or Disable (audio in the Fold open mode;
video, audio, or both in the Imaging mode), Activate
handset (if a headset with Bluetooth connectivity is
attached), Activate loudsp., or Activate handsfree (Fold
open mode only, and if a headset with Bluetooth
connectivity is attached), End active call, Change image
order, Zoom in/Zoom out (Imaging mode only), and Help.
Options during a video call
Tip! You can add DTMF tones to the Phone number
or Touch tones fields in a contact card.
Send touch tones—To send DTMF tone strings, for
example, a password. Enter the DTMF string or search for
it in Contacts. To enter a wait character (w) or a pause
character (p), press
repeatedly. Select OK to send the
tone.
Send MMS (in UMTS networks only)—To send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press
to send the file to a
compatible device ( ).
Replace—To end an active call and replace it by answering
the waiting call.
To monitor the approximate duration of your incoming and
outgoing calls, press , and select My own > Log > Call
timers.
Call timers
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and press
To monitor the phone numbers of missed, received, and
dialed calls, press , and select My own > Log > Recent
calls. The phone registers missed and received calls only if
the network supports these functions, the phone is
switched on, and within the network service area.
Recent calls
Log
Icons in Log:
Incoming
Outgoing
Missed communication events
Monitor all communication events
To check the amount of data sent and received during
packet data connections, press , and select My own >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Packet data
To clear call duration timers, select Options > Clear
timers. For this you need the lock code, see ‘Security’,
‘Phone and SIM’, p. 110.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
35
Make calls
36
Make calls
, and
To filter the log, select Options > Filter and a filter.
Sub events, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
Tip! To view a list of sent messages, press
select Messaging > Sent.
Tip! If you want to see the duration of a voice call on
the main display during an active call, select Options
> Settings > Show call duration > Yes.
To monitor all voice and video
calls, text messages, or data
connections registered by the
phone, press , select My
own > Log, and press the scroll
key to the right to open the
general log. For each
communication event, you can
see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the general log to view just one type
of event and create new contact cards based on the log
information.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
Tip! In the details view you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select Options > Copy Number.
To view the details of a communication event, in the
general log view scroll to an event, and press the scroll key.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the phone memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options>
Clear log. Select Yes to confirm.
Options in Contacts are Open, Call, Create
message, New contact, Open conversation, Edit,
Delete, Duplicate, Add to group, Belongs to groups,
Mark/Unmark, Copy/Copy to SIM direct., SIM
contacts, Go to web address, Send, Memory details,
Settings, Help, and Exit.
Tip! Regularly back up the phone information to the
memory card. You can restore the information, such as
contacts, to the phone later. See ‘Memory card tool’, p.
25. You can also use Nokia PC Suite to back up your
contacts to a compatible PC. See the CD-ROM supplied
with your phone.
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, which allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See ‘Data and settings’, p. 69.
Contact information can only be sent to or received from
compatible devices.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
Tip! To add and edit contact cards, use Nokia
Contacts Editor available in Nokia PC Suite. See the
CD-ROM supplied with your phone.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press
and
to mark the contacts, and press to
delete.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
Tip! If you use video sharing
with a contact,
save the contact’s session initiation protocol (SIP)
address to the Web address field of the contact
card. Enter the SIP address in the format
sip:username@domainname (you can use an IP
address instead of a domain name).
1 Select Options > New contact.
2 Fill in the fields that you want, and select Done.
Save names and numbers
Contacts (Phonebook)
37
Contacts (Phonebook)
38
Contacts (Phonebook)
The default number or address is underlined in the contact
card.
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The default
number is also used in voice dialing.
1 In contacts, select a contact, and press .
2 Select Options > Defaults.
3 Select a default to which you want to add a number or
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
Default numbers and addresses
Tip! To send contact information, select the card you
want to send. Select Options > Send > Via text
message, Via multimedia, or Via Bluetooth. See
‘Messaging’, p. 63 and ‘Send data using a Bluetooth
connection’, p. 98.
Tip! 1-touch dialing is a quick way to call frequently
used numbers. You can assign 1-touch dialing keys to
eight phone numbers. See ‘1-touch dial a phone
number’, p. 28.
Press
, and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
For availability and information on using SIM card services,
contact your SIM card vendor. This may be the service
provider, network operator, or other vendor.
SIM directory and other SIM services
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite. See the CD-ROM
supplied with your phone.
To copy contacts to your SIM card, press
, and select
Contacts. Select the names you want to copy and
Options > Copy to SIM direct., or Options > Copy > To
SIM directory. Only the contact card fields supported by
your SIM card are copied.
phone, press
, and select Contacts > Options > SIM
contacts > SIM directory. Select the names you want to
copy and Options > Copy to Contacts.
To copy names and numbers from a SIM card to your
Copy contacts
Add ringing tones for contacts
from group.
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select Options > Remove
Remove members from a group
To rename a group, select Options > Rename, enter the
new name, and select OK.
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
When a contact or group member calls you, the phone
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your phone recognizes it).
1 Press
to open a contact card, or go to the groups
list, and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
4 Open the group, and select Options > Add members.
5 Scroll to a contact, and press
to mark it. To add
Group %N, and select OK.
1 In Contacts, press
to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name
Options in the groups list view are Open, New group,
Delete, Rename, Ringing tone, Memory details,
Settings, Help, and Exit.
Create contact groups
To remove the ringing tone, select Default tone from the
list of ringing tones.
individual contact or the selected group.
3 Select the ringing tone you wish to use for the
When fixed dialing is activated, calls still may be possible
to the official emergency number programmed into your
device.
When you use Fixed dialing, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient’s phone number must be
included on the fixed dialing list.
To restrict calls from your phone to selected phone
numbers, select Options > Activ. fixed dialing. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialing contacts. This setting is
only shown if supported by your SIM card.
39
Contacts (Phonebook)
40
Contacts (Phonebook)
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs to
groups.
3 Select Yes to remove the contact from the group.
The images are automatically saved in the gallery in .jpeg
format. You can send images in a multimedia message as
an e-mail attachment or using a Bluetooth connection.
If the camera is in Video mode, open the image mode by
selecting Options > Image mode.
Warning! You
cannot make emergency
calls in the Imaging mode
because the keypad is not
active. To make an
emergency call, activate the Fold open mode.
To take a picture, press the capture key. Do not move the
phone before the image is saved. The image is saved
To lock the focus on an object, press the capture key
halfway down. The green locked focus indicator appears
on the display. If the focus was not locked, the red locked
focus indicator appears. Release the capture key, and press
it again halfway down. You can, however, take the picture
without locking the focus.
Options before taking a picture are Video mode, Go
to Gallery, Image setup, Sequence mode/Normal
mode, Self-timer, Settings, and Help.
Your phone also has a swing axis camera, which makes
capturing views in different situations easier. You can turn
the camera unit clockwise and counterclockwise. See
‘Camera mode’, p. 20.
To select a scene, select Options> Image setup > Scene.
See ‘Scenes’, p. 45.
To make lighting and color adjustments before taking a
picture, select Options > Image setup > Scene, Flash,
White balance, Exposure value, or Color tone. See ‘Setup
settings—Adjust color and lighting’, p. 44.
The Nokia XXXX device supports an image capture
resolution of 1600 x 1200 pixels. The image resolution in
these materials may appear different.
To activate the camera,
activate the Imaging mode.
See ‘Imaging mode’, p.20.
The camera starts, and you
can see the view to be
captured.
Take pictures in the Imaging mode
Camera
Camera and Gallery
41
Camera and Gallery
42
Camera and Gallery
Imaging mode camera indicators show the following:
• The phone memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, can fit in the
remaining memory of your phone or the memory card.
• The scene indicator (3) shows the active scene. See
‘Scenes’,p. 45.
• The flash indicator (4)
shows if the flash is set to
Automatic (
), Red
eye redu. (
), On
( ), or Off ( ).
• The green focus indicator
(5) is displayed when the
focus point is locked by
the viewfinder.
• The self-timer indicator
(6) shows that the
self-timer is activated.
See ‘You in the picture—self-timer’, p. 43.
Tip! You can also take pictures conveniently in the
Camera mode. See ‘Take pictures in the Camera mode’,
p. 46.
automatically in the Images & videofolder of Gallery. See
‘Gallery’, p. 53.
When taking a picture, note the following:
• It is recommended to use both hands to keep the
camera still.
• To take images or record video in different
environments, use the proper scene for each
environment. See ‘Scenes’, p. 45.
• To make lighting and color adjustments before taking a
picture, select Options > Image setup > Scene, Flash,
White balance, Exposure value, or Color tone. See
‘Setup settings—Adjust color and lighting’, p. 44.
• The quality of a zoomed picture is lower than that of a
non zoomed picture.
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
Shortcuts are as follows:
• Press the joystick up and down to zoom in and zoom
out. The zoom indicator, which appears on the side
pane, shows the zoom level.
• Press the joystick to enter the Image setup settings.
See ‘Setup settings—Adjust color and lighting’, p. 44.
• Press the joystick left or right to change the flash mode.
• The sequence mode indicator (7) shows that the
sequence mode is active. See ‘Take pictures in a
sequence’, p. 43.
After the image is taken, note the following:
• If you do not want to keep the image, select Options >
Delete.
• To return to the viewfinder to take a new picture, press
the capture key halfway down.
• To send the image Via multimedia, Via e-mail, or Via
Bluetooth, select Options > Send. For more
information, see ‘Messaging’, p. 63 and ‘Bluetooth
connection’, p. 97. This option is not available during an
active call.
• To send an image to the other party during an active
call, select Options > Send to caller.
• To edit the picture, select Options > Edit. See ‘Edit
images’, p. 48.
• To print the picture, select Options > Print. See ‘Image
print’, p. 57.
• The camera goes into battery saving mode if there are
no key presses in a while. To continue taking pictures,
press the capture key.
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select Options > Self-timer > 2 seconds
or 10 seconds. To activate the self-timer, select Activate.
The self-timer indicator ( ) blinks and the phone beeps
when the timer is running. The camera takes the picture
after the selected delay has elapsed. You can also use the
Self-timer in the sequence mode. See ‘Take pictures in a
sequence’, p. 43.
You in the picture—self-timer
To return to the sequence mode viewfinder, press the
capture key halfway down.
After taking the pictures,
they are shown in a grid on the main display. To view a
picture, press the joystick to open it.
Select Options > Sequence
mode to set the camera to
take six pictures in a
sequence. You can also use
the sequence mode with the
Self-timer. See ‘You in the
picture—self-timer’, p. 43.
The pictures are
automatically saved in
Gallery.
Take pictures in a sequence
43
Camera and Gallery
44
Camera and Gallery
If the flashlight is set to Red eye redu., it decreases the
redness of the eyes in the picture.
If the flashlight is set to Off or Automatic during bright
conditions, the flashlight still emits a low light when an
image is captured. This allows the subject of the picture
to see when the picture is taken. There is no flashlight
effect on the resultant picture.
Select Options > Image setup > Flash > On to use the
flashlight.
The camera has an LED flashlight for low light conditions.
The following flashlight modes are available: Automatic
), Red eye redu. (
), On ( ), and Off ( ).
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
Flashlight
Tip! Select Options > Self-timer > 2 seconds to
keep your hand steady when taking a picture.
The screen display changes to match any settings made,
showing you how the change affects the pictures or videos.
Color tone—Select a color effect from the list.
Exposure value (images only)—Adjust the exposure time of
the camera.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Flash (images only)—Set the flash to Automatic, Red eye
redu., On, or Off. See ‘Flashlight’, p. 44.
Scene—Select a proper scene
for the environment in which
you are taking pictures. See
‘Scenes’, p. 45. Every scene uses its own lighting settings
that have been adjusted according to a certain kind of
environment.
To enable the camera to
reproduce colors and lighting
more accurately, or to add
effects to your pictures or
videos, select Options >
Image setup or Video setup,
and select from the following
options:
Setup settings—Adjust color and lighting
Close-up mode—Use this scene for close up photography.
User defined—Use this scene to create a personalized
scene with your own flash, white balance, exposure value,
and color tone settings.
Automatic (default)—Use this scene in all conditions.
Image scenes
Night—Use this scene in low light conditions. The night
mode is indicated with
Normal (default)—Use this scene in all conditions.
Video scenes
A scene helps you to find the right color and lighting
settings for the current environment. Select a proper scene
for taking pictures or recording video clips from a scenes
list. The settings of each scene have been set according to
a certain style, or environment in which the pictures are
taken. Select Options > Image setup/Video setup >
Scene:
Scenes
The settings return to the default settings when you close
the camera. If you select a new scene, the settings are
replaced by the settings of the selected scene. See ‘Scenes’,
p. 45. If you, however, need to change the setup settings,
you can change them after selecting a scene.
To make your own scene suitable for a certain
environment, select User defined scene. In the user scene
you can adjust Based on scene, Flash, White balance,
Exposure value, Color tone, and Reset user scene
options. To copy the settings of another scene, select
Based on scene and the desired scene.
When taking pictures, the default scene is Automatic. If
you, however, select the User defined scene, it is set as
the default scene.
Sports—Use this scene to
take pictures of fast moving
objects. Note that when you use this scene, the resolution
of the images is reduced from 1600x1200 to 800x600. See
Image quality, 46.
Night—Use this scene in low
light conditions. The night
mode is indicated with
Landscape—Use this scene
when you take pictures of
objects that are further
away.
Portrait—Use this scene to take portrait pictures, such as
head shots and sitting poses.
45
Camera and Gallery
46
Camera and Gallery
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Show focus point (image only)—Select Yes if you want
the focus point to be visible on the main display when
taking a picture.
Add to album—Select whether you want to save the
image to a certain album in the gallery. If you select Yes,
a list of available albums opens.
Image quality—High-Print (resolution 1600x1200),
Med.-Email (resolution 800x600), or Low-Multimedia
(resolution 640x480). The better the image quality, the
more memory the image consumes. The quality of a
zoomed picture is lower than that of a non zoomed
picture. If you want to print the image, select High-Print.
If you want to send it through e-mail, select Med.-Email.
To send the image through MMS, select Low-Multimedia.
There are two kinds of settings for the still image camera
in the Imaging mode: Image setup settings and main
settings. To adjust Image setup settings, see ‘Setup
settings—Adjust color and lighting’, p. 44. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Adjust still image camera settings
The camera in the Camera mode can be activated and used
also during an active call.
1 To activate the
Camera mode, turn
the camera unit in the
Fold closed mode. See
‘Fold closed mode’, p.
19. The active keypad
lock is deactivated,
and the viewfinder
appears on the cover
display.
To zoom in or zoom out, move the joystick to the right
or to the left.
2 To lock the focus on an object, press the capture key
halfway down. The green locked focus indicator
appears on the display. If the focus was not locked, the
red locked focus indicator appears. Release the capture
key, and press it again halfway down. You can,
however, take the picture without locking the focus.
3 To take the picture, press the capture key all the way
down. The picture is automatically saved in the gallery.
See ‘Gallery’, p. 53.
Take pictures in the Camera mode
Memory in use—Select where to store your images.
Camera mode indicators show the following:
• The mode indicator (1)
shows the active scene.
See ‘Scenes’, p. 45.
• The phone memory ( )
and memory card ( )
indicators (2) show where
images are saved.
• The images indicator (3)
estimates how many
images, depending on the
selected image quality,
can fit in the remaining
memory of your phone or the memory card.
• The green focus indicator (4) is displayed when the
focus point is locked by the viewfinder.
• The self-timer indicator (5) shows that the self-timer is
activated. See ‘You in the picture—self-timer’, p. 43.
• The flash indicator (6) shows if the flash is set to
Automatic (
), Red eye redu. (
), On ( ), or Off
( ). Select between the flash modes by moving the
joystick up or down. You can see the flash mode in the
pop-up window on the display.
To keep the image on the display after taking it, hold the
capture key down. To return to the viewfinder, release the
capture key.
Settings—To adjust the Image quality, Memory in use,
and Show captured img. settings. See ‘Adjust still image
camera settings’, p. 46.
Exposure value—To adjust the brightness of the picture.
Self-timer—To activate the self-timer. Select 2 seconds
or 10 seconds.
Flip view—To flip the picture 180 degrees. You need this
option when you take a picture, for example, of yourself;
when you turn the camera unit so that it is facing you, the
viewfinder is upside down.
Set scene—To select a proper scene for the image
capturing environment. See ‘Scenes’, p. 45.
To adjust the image settings, press the joystick, and select
from the following options:
Camera mode options
To close the camera in the Camera mode, return to the
Fold closed mode by turning the camera unit. See ‘Fold
closed mode’, p. 19.
• The zoom indicator (7) shows the zoom level. Move the
joystick left and right to zoom in and zoom out.
• The joystick indicator ( ) (8) indicates that the
Options menu is available. Press the joystick to open
the Options menu.
47
Camera and Gallery
48
Camera and Gallery
To add clip art to an image, select Options > Apply
effect > Clip art. Select the item you want to add from
To reduce redness of the eyes in an image, select
Options > Apply effect > Red eye reduction. Move the
cross onto the eye, and press the joystick. A loop appears
on the display. To resize the loop to fit the size of the eye,
move the joystick. Press the joystick to reduce the redness.
To crop an image, select Options > Apply effect > Crop.
A cross appears on the upper left corner of the image. To
move the cross, and select the area to be cropped, move
the joystick. Select Set. Another cross appears on the
lower right corner. Select again the area to be cropped,
and select Crop. The selected areas form cropped image.
Select Apply effect to, for example, crop and rotate the
image; adjust the brightness, color, contrast, compression,
and resolution; and add effects, text, clip art, or a frame
to the picture.
Options in the edit main view are Apply effect,
Undo,Send, Full screen/Normal screen, Zoom in/
Zoom out, Save, Print,Help, and Close edit.
To edit the pictures after taking them, or the ones already
saved in Gallery, select Options > Edit. You can open the
Gallery application in the Imaging mode or in the Fold
open mode.
Edit images
Use the appropriate picture quality. The camera has
three picture quality modes (High-Print, Med.-Email, and
Low-MMS). Use the High-Print setting to make sure that
the camera produces the best picture quality available.
Note however, that better picture quality requires more
storage space. For MMS and e-mail attachments it may be
Picture quality
By turning the swing axis camera, capturing the views in
demanding situations is easier. You can turn the camera
unit clockwise or counterclockwise. See ‘Camera mode’, p.
20.
Tips on taking good photographs
Shortcuts in the image editor:
• To view an image in full screen, press
. To return to
the normal view, press
again.
• To rotate an image clockwise or counterclockwise,
press
and
• To zoom in or zoom out, press
and
To add text to an image, select Options > Apply effect >
Text. Enter the text, and select OK. To edit the text, select
Options > Move, Resize, Rotate, or Colour.
the list, and press the joystick. To move, rotate, and change
the size of the item, select Options > Move, Resize, or
Rotate.
Changing the source, amount, and direction of light can
change photographs dramatically. Here are some typical
lighting conditions:
• Light source behind the subject. Avoid placing your
subject in front of a strong light source. If the light
source is behind the subject or visible in the display, the
resulting picture may have weak contrast, may be too
dark, and may contain unwanted light effects. You can
Lighting conditions
When shooting landscapes and sceneries, add depth to
your pictures by placing objects into the foreground. Note
however, that if the foreground object is too close to
camera, it may be blurred.
Depth
Use a simple background. For portraits and other pictures
with people, avoid having your subject in front of a
cluttered, complex background that may distract attention
from the subject. Move the camera, or the subject, when
these conditions cannot be met. Move the camera closer to
the object to take clearer portraits.
Background
necessary to use the Med.-Email or Low-MMS setting. To
define the quality in the image mode in the camera, select
Options > Settings.
To select a scene, select Options > Video setup > Scene.
See ‘Scenes’, p. 45.
To make lighting and colour adjustments before recording
a video, select Options > Video setup > Scene, White
balance, or Colour tone. See ‘Setup settings—Adjust color
and lighting’, p. 44.
If the camera is in Image mode, open the video recorder
view by selecting Options > Video mode.
To activate the camera and the viewfinder on the main
display, activate the Imaging mode. See ‘Take pictures in
the Imaging mode’, p. 41. The camera starts, and you can
see the view to be captured.
Record videos
also use the flashlight to add more lighting to
shadows. See ‘Flashlight’, p. 44.
• Sidelit subject. Strong side light gives a dramatic
effect but may be too harsh, resulting in too much
contrast.
• Light source in front of the subject. Harsh sunlight
may cause the subjects to squint their eyes. The
contrast may also be too high.
• Optimal lighting is found in situations where there is
plenty of diffused, soft light available, for example, on
a bright, partially cloudy day or on a sunny day in the
shadow of trees.
49
Camera and Gallery
50
Camera and Gallery
Video recorder indicators
show the following:
• The phone memory ( )
and memory card ( )
indicators (1) show
where the video is saved.
• The current video length
indicator (2) shows
elapsed time and time
remaining.
• The mode indicator (3)
shows the active mode. See ‘Scenes’, p. 45.
icon
is shown. The LED flash is lit, and a tone
sounds, indicating to the subject that video is being
recorded. There is no flash effect on the resultant
video.
2 To pause recording at any time, select Pause. The
pause icon
blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no key presses within a minute.
3 Select Continue to resume recording.
4 Select Stop, or press the capture key to stop recording.
The video clip is automatically saved to the Images &
videofolder of Gallery. See ‘Gallery’, p. 53.
1 Press the capture key to start recording. The record
Options before recording video are Image mode, Go
to Gallery, Video setup, Settings, and Help.
After a video clip is recorded:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, select Options >
Delete.
• To return to the viewfinder to record a new video, press
the capture key.
• To send the video Via multimedia, Via e-mail, or Via
Bluetooth, select Options > Send. For more
information, see ‘Messaging’, p. 63 and ‘Bluetooth
connection’, p. 97. This option is not available during an
active call.
• To send a video clip to the other party during an active
call, select Options > Send to caller.
• To edit the video, select Options > Edit. See ‘Edit video
clips’, p. 51.
Shortcuts are as follows:
• Press the joystick up or down to zoom in or zoom out.
The zoom indicator, which appears on the side pane,
shows the zoom level.
• Press the joystick to enter the Video setup settings. See
‘Setup settings—Adjust color and lighting’, p. 44.
• The microphone indicator (4) shows that the
microphone is muted.
• The file format indicator (5) indicates the format of the
video clip.
Video quality—Set the quality of the video clip to High,
Normal, or Sharing. The quality is indicated with one of
the following icons:
(High), (Normal), or
(Sharing). If you select High or Normal, the length of the
video recording is restricted by the available space on your
memory card, and up to 1 hour per clip. If you want to view
the video on a TV or PC, select High video quality, which
has CIF resolution (352x288) and file format .mp4. You
cannot send video clips saved in the .mp4 format in a
multimedia message. If you want to view the clip in mobile
phones, select Normal, which has QCIF resolution
(176x144) and file format .3gp. To send the video clip
through MMS, or send it through video sharing, select
Sharing (QCIF resolution, file format .3gp). See ‘Video
sharing’, p. 30. The video clip is limited to 300 kB
(approximately 20 seconds in duration) so that it can be
Audio recording—Select On if you want to record both
image and sound.
There are two kinds of settings for the video recorder in the
Imaging mode: Video setup settings and main settings. To
adjust Video setup settings, see ‘Setup settings—Adjust
color and lighting’, p. 44. The setup settings return to the
default settings after you close the camera, but the main
settings remain the same until you change them again. To
change the main settings, select Options > Settings and
from the following:
Video settings
To edit video clips and create custom video clips, scroll to
a video clip, and select Options >Edit. You can create
custom video clips by combining and trimming video clips,
and adding images, sound clips, transitions, and effects.
Transitions are visual effects that you can add in the
beginning and end of the video or between the video clips.
You can edit video clips in Gallery in the Fold open mode
or in the Imaging mode. See ‘Take pictures in the Imaging
mode’, p. 41, and ‘Gallery’, p. 53.
Edit video clips
Memory in use—Define the default memory store: phone
memory or memory card.
Show captured video—Select whether you want the
recorded video clip to play automatically after the
recording stops.
Add to album—Select whether you want to save the
recorded video clip to a certain album in Gallery. Selecting
Yes opens a list of available albums.
conveniently sent as a multimedia message to a
compatible device. Some networks, however, may only
support sending of multimedia messages with a maximum
size of 100 kB. Contact your service provider for more
information.
51
Camera and Gallery
52
Camera and Gallery
Remove—Removes the video clip from the video.
Move—Moves the video clip to the selected location.
Mute sound/Unmute sound—Mutes or unmutes the
original video clip sound.
Use slow motion—Slows the speed of the video clip.
Add color effect—Inserts a colour effect on the video clip.
Cut—Trims the video clip in the Cut video clip view.
Edit video clip:
To modify the video, select from the following options:
In the Edit video view, you can insert video clips to make
a custom video clip, and edit the clips by trimming and
adding effects. You can add images and sound clips and
change their duration, and also add text and transitions to
the clip.
To create custom video clips, mark and select one or more
video clips, and select Options > Edit.
Edit video, sound, image, text, and transitions
In the video editor you can see two time-lines: video clip
timeline and sound clip timeline. If you add images, text,
or transitions to a video clip, they are shown on the video
clip timeline. To move on the timelines, scroll left or right.
To switch between the timelines, scroll up or down.
Edit transition—There are
three types of transitions: at
the start of a video, at the
end of a video, and
transitions between video
Change duration—Changes
the length of the sound clip.
Duplicate—Makes a copy of
the selected video clip or
sound clip.
Remove—Removes the sound clip from the video.
Move—Moves the sound clip to the selected location.
Cut—Trims the sound clip in the Cut sound clip view.
Edit sound clip:
Edit image (shown only if you have added an image)—To
move, remove or duplicate an image; define how long it
stays on the screen; and set a background or a colour
effect to the image.
Edit text (shown only if you have added text)—To move,
remove or duplicate text; change the colour and style of
the text; define how long it stays on the screen; and add
effects to the text.
Duplicate—Makes a copy of the selected video clip or
sound clip.
Tip! To take a snapshot of a video clip, select
Options > Take snapshot in the thumbnail Preview
view or in the Cut video view.
Movie—To preview the movie in full screen or as a
thumbnail, save or send the movie, or cut the movie to a
proper size for sending it in a multimedia message.
New sound clip—Records a new sound clip to the selected
location.
Sound clip—Inserts the selected sound clip. The name and
length of the selected sound clip is shown in the main
view.
Text—Inserts text to the video clip. You can insert a title,
subtitle, or credits.
Image—Inserts the selected image. A thumbnail of the
image is shown in the main view.
Video clip—Inserts the selected video clip. A thumbnail of
the video clip is shown in the main view. A thumbnail
consists of the first non-black view of the video clip. The
name and length of the selected video clip is also shown.
Insert:
clips. A start transition can be selected when the first
transition of the video is active.
To store and organize your images, video clips, sound clips,
playlists, and streaming links, in the Fold open mode, press
, and select Gallery. To open the gallery in the Imaging
Gallery
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using Bluetooth.
See ‘Send data using a Bluetooth connection’, p. 98. You
can also transfer your videos using Bluetooth into your
Bluetooth-enabled personal computer, or by using a
memory card reader (enhancement).
Select Send > Via multimedia, Via e-mail, or Via
Bluetooth if you want to send the video. Contact your
service provider for details of the maximum multimedia
message size that you can send. If your video is too large
to be sent in a multimedia message, the symbol
appears.
Tip! In the Settings view, you can define Default
video name, Default sc. shot name, Save quality, and
Memory in use.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the phone memory.
53
Camera and Gallery
54
Camera and Gallery
Press
to open a file. Videos, music, and sound clips
open in RealPlayer. See ‘View images and video clips’, p.
54.
Tip! You can transfer images from your phone to a
compatible PC with Nokia Phone Browser available in
Nokia PC Suite. See the CD-ROM supplied with your
phone.
You can browse and open
folders; and mark, copy, and
move items to folders. Sound clips, video clips, .ram files,
and streaming links are opened and played in the
RealPlayer application. See ‘RealPlayer™’, p. 58. You can
also create albums; and mark, copy, and add items to
albums. See ‘Albums’, p. 55.
Select Images & video
Tracks
, Sound clips
, Links
, or All files
, and press
to open
it.
Tip! To switch from
Gallery to the camera in
the Imaging mode, select
Camera.
mode, select Options > Go to Gallery. In the Imaging
mode, only the Images & video folder is available.
Open the Images & video folder in Gallery. The images and
video clip files are in a loop, and ordered by date. The
number of files can be seen on the display. To browse the
Pictures taken and video clips recorded with the camera
are stored in the Images & video folder in Gallery. The
quality of a video clip is indicated with one of the
following icons:
(High), (Normal), and (Sharing).
Images and video clips can also be sent to you in a
multimedia message, as an e-mail attachment, or through
a Bluetooth connection. To be able to view a received
image or video clip in the gallery or in the media player,
you must save it in the phone memory or on a memory
card.
View images and video clips
To download files into Gallery in one of the main folders
using the browser, select ( ) Graphic downls. or Video
downlds., Track downlds., or Sound downlds.. The
browser opens, and you can select a bookmark from which
the site can download.
To copy or move files to the memory card or to phone
memory, select a file and Options > Organize> Copy to
memory card/Move to memory card or Copy to phone
mem./Move to phone mem.. Files stored on the memory
card are indicated with
Options when viewing an image are Zoom in/Zoom
out, Send, Add to album, Set as wallpaper, Assign to
contact, Print, Edit, Delete, Rename, View details,
Add to ’Go to’, Help, and Exit.
To create custom video clips, select a video clip, or several
clips, in the gallery, and select Options > Edit. See ‘Edit
video clips’, p. 51.
Options when playing a video clip are Play, Send,
Add to album, Edit, Delete, Rename, View details,
Add to ’Go to’, Help, and Exit.
To add an image or a video clip to an album in the gallery,
select Options > Add to Album. See ‘Albums’, p. 55.
To edit a photo or a video clip, select Options > Edit. An
image editor or a video editor opens.
To change all the files that are displayed, scroll left or right.
Options in the Images & video main view are
Open(images only), Play(videos only), Send, Go to
Camera, Add to Album, Albums, Print (images only),
Edit, Delete, Organize, Mark/Unmark, Help, and Exit.
Tip! To navigate and open files in the Imaging mode,
use the joystick.
files, scroll up or down. Press and hold the scroll key up or
down to browse the files in a continuous loop.
To remove a file from an album, press
. The file is not
deleted from the Images & video folder in Gallery.
To add a picture or a video clip to an album in the gallery,
scroll to a picture or video clip, and select Options > Add
to album. A list of albums opens. Select the album to
which you want to add the picture or video clip, and press
the scroll key.
To create a new album, select Options > New album.
Enter a name for the album, and select OK.
With albums you can conveniently manage your images
and video clips. To view the albums list, in the Images &
video folder, select Options > Albums. The albums are
ordered alphabetically. To view the content of an album,
press the scroll key.
Albums
To delete an image or a video clip, press
To zoom an image, select Options > Zoom in or Zoom out.
The zooming ratio is at the top of the display. The zooming
ratio is not stored permanently.
To print your images on a printer connected to your phone,
or to store them on your MMC for printing, select
Options > Print. See ‘Image print’, p. 57.
55
Camera and Gallery
56
Camera and Gallery
When you use Image print for the first time, a list of
available printers is displayed after you select the image.
Select a printer you want to use. The printer is set as the
default printer.
Printer selection
Select the image you want to print and Options > Print.
Note: To print to a PictBridge-compliant printer,
select the print option before you connect the USB
cable.
You can only print images which are in .jpg format. The
pictures taken with the camera are automatically saved in
.jpg format.
Use Image print to print your images using a data cable, a
Bluetooth connection, or your memory card.
You can print images with Image print by selecting the
print option in the gallery, camera, image editor, image
viewer, or the active standby mode.
Image print
Imaging
The available settings options vary, depending on the
capabilities of the printing device you selected.
Print settings
Options in print preview are Print, Print settings,
Help, and Exit.
The images that you selected are displayed using
predefined layouts. To change the layout, scroll left and
right through the available layouts for the selected
printer. If the images do not fit on a single page, scroll up
or down to display the additional pages.
The print preview view opens only when you start printing
an image in the gallery or the active standby mode.
Print preview
To change the default printer, select Options > Print
settings > Default printer.
If the default printer is not available, a list of available
printing devices is displayed again.
If you have connected a PictBridge-compliant USB printer
using the CA-53 cable supplied with the phone, the printer
is automatically displayed.
57
Imaging
58
Imaging
Tip! You can transfer music files from your phone to
your memory card with Nokia Audio Manager available
in Nokia PC Suite. See the CD-ROM supplied with your
phone.
RealPlayer supports files with extensions such as .aac,
.awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer
does not necessarily support all file formats or all the
variations of file formats. For example, RealPlayer will
attempt to open all .mp4 files, but some .mp4 files may
include content that is not compliant with 3GPP
standards and, therefore, is not supported by this phone.
Press
, and select RealPlayer. With RealPlayer, you
can play video clips, sound clips, and playlists, or stream
media files over the air. You can activate a streaming link
when you browse Web pages, or store it in the phone
memory or memory card. You can use RealPlayer also in
the Imaging mode with limited key functions. See ‘Take
pictures in the Imaging mode’, p. 41.
RealPlayer™
To select the paper size, select Paper size, the size of
paper from the list, and OK. Select Cancel to return to the
previous view.
To set a default printer, select Options > Default printer.
To create a track list of the music tracks on your phone
memory, or on the memory card:
1 Select Options > New track list.
2 Select the memory from which you want to select the
music tracks.
3 Enter a name for the track list.
Create a track list
Icons in RealPlayer:
—Repeat;
—Random;
— Repeat and random; and —Loudspeaker muted.
Tip! To view a video clip in full screen mode, press
. Press again to change back to normal screen mode.
memory card, select Options > Open and select:
Most recent clips—To play one of the last six files
played in RealPlayer.
Saved clip—To play a file saved in Gallery. See ‘Gallery’,
p. 53.
2 Scroll to a file, and press
to play the file.
1 To play a media file stored in phone memory, or on the
Options in RealPlayer when a clip is selected are
Play, Play in full screen/Continue, Continue in full
scr.; Stop, Mute/Unmute, Clip details, Send, Settings,
Help, and Exit.
Play video or sound clips
Note: In RealPlayer, you can only open an rtsp:// URL
address. However, RealPlayer will recognize an http link
to a .ram file.
Contact your service provider for more information.
The access points may be configured when you first start
your phone.
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
Stream content over the air
Shortcuts during play:
• To fast forward, press and hold
• To rewind through the media file, press and hold
• To mute the sound, press and hold
until the
indicator is displayed. To turn on the sound, press and
hold
until you see the
indicator.
list.
5 Select Back. The track list automatically starts to play.
Tip! To leave the application open and music playing
in the background, press
twice to return to the
standby mode. To return to the application, press
and select RealPlayer.
4 Select the music tracks you want to include in the track
Proxy settings:
• Use proxy—To use a proxy server, select Yes.
Connection—To select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Audio—To select if you want to repeat playing of track
lists and play sound clips on a track list in random order.
Video—To adjust the contrast of the video, and to have
RealPlayer automatically repeat video clips after they
finish playing.
Select Options > Settings and from the following:
Change the RealPlayer settings
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See ‘Data and settings’, p. 69. For more information,
contact your network operator or service provider.
Receive RealPlayer settings
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your phone connects to the site and
starts loading the content. The content is not saved in the
phone.
59
Imaging
60
Imaging
Network settings:
• Default access point—Scroll to the access point you
want to use to connect to the Internet, and press
• Online time—Set the time for RealPlayer to
disconnect from the network when you have paused a
media clip playing through a network link, select User
defined, and press
. Enter the time, and select OK.
• Lowest UDP port—Enter the lowest port number of
the servers port range. The minimum value is 6970.
• Highest UDP port—Enter the highest port number of
the servers port range. The maximum value is 32000.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
• Proxy serv. address—Enter the IP address of the
proxy server.
• Proxy port number—Enter the port number of the
proxy server.
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
use them to provide additional security or speed up
access to browser pages that contain sound or video
clips.
created muvee is saved in Movie director muvee list.
The muvee is played automatically after saving.
1 In the Movie main view, select Quick muvee.
2 Select a style for the muvee from the style list. The
Create a quick muvee
The
view contains a list of video clips that you can
Play, Send, Rename, andDelete.
Open Movie, and press
or
to move between the
and
views. You can also return to the main
view from the
view by selecting Done.
To create muvees, press
, and select Imaging > Movie.
muvees are short, edited video clips that can contain video,
images, music, and text. Quick muvee is created
automatically by Movie director after you select the style
for the muvee. Movie director uses the default music and
text associated with the chosen style. Every style has its
own font style, color, music, and pace. In a Custom
muveeyou can select your own video and music clips,
images and style, and add opening and closing message.
You can send muvees with MMS.
Movie Director director
Video, Image, Style, or Music.
After you have selected video clips and images, to
define the order in which the files are played in the
muvee, select Options > Advance. Select the file you
want to move by pressing the scroll key. Then scroll to
the file below which you want to place the marked file,
and press the scroll key.
To cut the video clips, select Options> Select contents.
See ‘Select content’, p. 61.
In Message you can add an opening and closing text to
a muvee.
3 Select Create muvee. and from the following:
Multimedia message—to optimize the length of the
muvee for MMS sending.
Auto-select—to include all the selected pictures and
video clips in the muvee.
Same as music—to set the muvee duration to be the
same as the chosen music clip.
User defined—to define the length of the muvee.
4 Select Options > Save.
1 In the Movie main view, select Custom muvee.
2 Select the clips you want to include in your muvee in
Create a custom muvee
Tip! To download new styles to your phone, select
Style downlds. ( ) from the Movie director main
view.
To let Movie director randomly include or exclude parts
of the video clip, select Options > Neutralize all.
To exclude a shot from the video clip, select Options >
Exclude shot.
To let Movie director randomly include or exclude a part
of the video clip, scroll to the part, and select Options >
Neutralize.
To exclude a part from the video clip, scroll to the part, and
select Options > Exclude.
To include a part of the video clip in the muvee, scroll to
the part, and select Options > Highlight.
After you select images and video clips for your muvee,
you can edit the selected video clips. Select Options >
Advance > Options > Select contents. You can select
which parts of the video clip you want to include or
exclude in the muvee. A slider below the video screen
indicates the included, excluded, and neutralized parts
with colors: green is for included, red is for excluded, and
grey is for neutral parts.
Select content
To create a new custom muvee by using the same style
settings, select Options > Recreate.
To preview the custom muvee before saving it, in the
Preview muvee view, select Options > Play.
61
Imaging
62
Imaging
Default muvee name—Set a default name for the
muvees.
Resolution—Select the resolution of your muvees.
Memory in use—Select where to store your muvees.
Select Settings to edit the following options:
Settings
Mailbox—In Mailbox you can connect to your remote
mailbox to retrieve your new e-mail messages or view your
previously retrieved e-mail messages offline. See ‘E-mail’,
p. 75.
My folders—For organizing your messages into
folders.
Inbox—Contains received messages except e-mail and
cell broadcast messages. E-mail messages are stored in the
Mailbox.
When you open Messaging, you can see the New message
function and a list of folders:
Note: Only devices that have compatible features
can receive and display multimedia messages. The
appearance of a message may vary depending on the
receiving device.
Press
, and select Messaging. In Messaging, you can
create, send, receive, view, edit, and organize text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data through a Bluetooth
connection, receive Web service messages, cell broadcast
messages, and send service commands.
Messaging
Drafts—Stores draft messages that have not been
Cell broadcast
allows you to receive messages on
various topics, such as weather or traffic conditions from
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messaging.
Tip! When you have opened any of the default
folders, you can switch between the folders by pressing
or
Reports ( )—You can request the network to send
you a delivery report of the text messages and multimedia
messages you have sent. Receiving a delivery report of a
multimedia message that has been sent to an e-mail
address might not be possible.
Outbox—A temporary storage place for messages
waiting to be sent.
Sent—Stores the last 20 messages that have been
sent excluding messages sent using a Bluetooth
connection. To change the number of messages to be
saved, see ‘Other settings’, p. 77.
sent.
63
Messaging
64
Messaging
The indicator
is shown on the top right of the
display when you are writing text using traditional text
input.
and
indicate the selected case.
means that the first letter of the word is written in
uppercase, and all other letters are automatically written
in lowercase.
indicates number mode.
Traditional text input
Write text
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
Options in Cell broadcast are Open, Subscribe/
Unsubscribe, Hotmark/Remove hotmark, Topic,
Settings, Help, and Exit.
your service provider. For available topics and relevant
topic numbers, contact your service provider. In the main
view of Messaging, select Options > Cell broadcast. In
the main view you can see the status of a topic, a topic
number, name, and whether it has been flagged ( ) for
follow-up.
You can enter any letter with a single key press. Predictive
text input is based on a built-in dictionary to which you
can also add new words. When the dictionary becomes full,
the latest added word replaces the oldest.
Predictive text input—Predictive text
• Press a number key (
—
) repeatedly until the
desired character appears. There are more characters
available for a number key than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To erase a character, press
. Press and hold
to
clear more than one character.
• The most common punctuation marks are available
under
. Press
repeatedly to reach the desired
punctuation mark.
Press
to open a list of special characters. Use
to move through the list, and press Select to select a
character.
• To insert a space, press
. To move the cursor to the
next line, press
three times.
• To switch between the different character modes, press
input, press
, and
select Predictive text on.
This activates predictive
text input for all editors in
the phone.
is
shown on the top right of
the display when you
write text using predictive
text input.
2 To write the desired word, press the keys
—
Press each key only once for one letter. For example, to
write ‘Nokia’ when the English dictionary is selected,
press
for N,
for o,
for k,
for i, and
for a.
The word suggestion changes after each key press.
3 When you finish writing the word and it is correct, to
confirm it, press
, or press
to add a space.
If the word is not correct, press
repeatedly to view
the matching words the dictionary has found one by
one, or press
, and select Predictive text >
Matches.
If the ? character is shown after the word, the word you
intended to write is not in the dictionary. To add a word
to the dictionary, select Spell, enter the word using
traditional text input, and select OK. The word is added
to the dictionary. When the dictionary becomes full, a
new word replaces the oldest added word.
1 To activate predictive text
. Press and hold
to clear
to open a list of special characters.
Press
repeatedly to view the matching words the
dictionary has found one by one.
Press and hold
The most common punctuation marks are available under
. Press
and then
repeatedly to search for the
desired punctuation mark.
To switch between letter and number mode, press and
hold
To insert a number in letter mode, press and hold the
desired number key.
Tip! Predictive text input tries to guess which
commonly used punctuation mark (.,?!‘) is needed. The
order and availability of the punctuation marks depend
on the language of the dictionary.
To change between the different character modes, press
. If you press
quickly twice, predictive text input
is turned off.
To erase a character, press
more than one character.
Tips on predictive text input
Tip! To set predictive text input on or off, press
twice quickly.
4 Start writing the next word.
65
Messaging
66
Messaging
to select
Press
, and select Predictive text > Off to turn
predictive text input off for all editors in the phone.
Turn predictive text input off
Write the first half of a compound word; to confirm it,
press
. Write the last part of the compound word. To
complete the compound word, press
to add a space.
Write compound words
Tip! When you press
, the following options
appear (depending on the editing mode): Predictive
text (predictive text input), Alpha mode (traditional
text input), Number mode, Cut (if text has been
selected), Copy (if text has been selected), Paste (when
text has been cut or copied first), Insert number,
Insert symbol, and Writing language: (changes the
input language for all editors in the phone).
Edit word—To edit the word using traditional text input.
This is available if the word is active (underlined).
Insert word—To add a word to the dictionary by using
traditional text input. When the dictionary becomes full,
a new word replaces the oldest added word.
Matches—To view a list of words that correspond to your
key presses.
Press
, select Predictive text, and press
one of the following options:
Before you can create a multimedia message or write an email, you must have the correct connection settings in
Tip! You can start to create a message from any
application that has the option Send. Select a file
(image or text) to be added to the message, and select
Options > Send.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
The appearance of a multimedia message may vary,
depending on the receiving device.
Write and send messages
. At the
same time, press
or
. As the selection moves,
text is highlighted.
2 To copy the text to the clipboard, while still holding
, select Copy.
3 To insert the text into a document, press and hold
and select Paste, or press
once, and select Paste.
To select lines of text, press and hold
. At the same
time press
or
To remove the selected text from the document, press
1 To select letters and words, press and hold
Copy text to clipboard
3
Text message—to send a text message.
Multimedia message—to send a multimedia message
(MMS).
E-mail—to send an e-mail. If you have not set up your
e-mail account, you are prompted to do so.
Press
to select recipients or groups from contacts,
or enter the recipient’s phone number or e-mail
address. Press
to add a semicolon (;) that separates
the recipients. You can also copy and paste the number
or address from the clipboard.
Tip! Scroll to a contact, and press
to mark it.
You can mark several recipients at a time.
Press
to move to the message field.
Write the message.
To add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or Video
clip. When sound is added, the
icon is shown in the
navigation bar.
You cannot send video clips that are saved in the .mp4
format in a multimedia message. To change the format
1 Select New message. A list of message options opens.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
place. See ‘Receive MMS and e-mail settings’, p. 68 and ‘Email’, p. 75.
in which recorded videos are saved, see ‘Video
settings’, p. 51.
6 To take a new picture or
record sound or video for
a multimedia message,
select Insert new >
Image, Sound clip, or
Video clip. To insert a
new slide to the message,
select Slide.
Select Options > Preview
to see what the
multimedia message
looks like.
7 To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip or Note. E-mail
attachments are indicated by
in the navigation bar.
Tip! To send files other than sounds and notes as
attachments, open the appropriate application, and
select Send > Via e-mail, if available.
8 To send the message, select Options > Send, or press
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
will be sent as a series of two or more messages. Your
service provider may charge accordingly. Characters that
use accents or other marks, and characters from some
67
Messaging
68
Messaging
Tip! When you send a multimedia message to an
e-mail address or a device that supports the receiving
of large images, use the larger image size. If you are
not sure of the receiving device, or the network does
not support sending large files, it is recommended that
you use a smaller image size or a sound clip that is no
longer than 15 seconds. To change the setting, select
Options > Settings > Multimedia message > Image
size in the Messaging main view.
Tip! In Messaging you can also create presentations
and send them in a multimedia message. In the
multimedia message editor view, select Options >
Create presentation (shown only if MMS creation
mode is set to Guided or Free). See ‘Multimedia
messages’, p. 74.
Note: E-mail messages are automatically placed in
Outbox before sending. If sending does not succeed,
the e-mail is left in the Outbox with the Failed status.
language options like Chinese, take up more space
limiting the number of characters that can be sent in a
single message. In the navigation bar, you can see the
message length indicator counting backwards. For
example, 10 (2) means that you can still add 10 characters
for the text to be sent as two messages.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
‘Connection settings’, p. 107.
• Define your e-mail settings correctly. See ‘E-mail’, p.
75. You need to have a separate e-mail account. Follow
the instructions given by your remote mailbox and
Internet service provider (ISP).
For availability of and subscription to data services,
contact your network operator or service provider. Follow
the instructions given by your service provider.
Enter the MMS settings manually:
1 Select Tools > Settings > Connection > Access points,
and define the settings for a multimedia messaging
access point. See ‘Connection settings’, p. 107.
2 Select Messaging > Options > Settings > Multimedia
message > Access point in use and the access point
you created to be used as the preferred connection. See
also ‘Multimedia messages’, p. 74.
You may receive the settings in a text message from your
network operator or service provider. See ‘Data and
settings’, p. 69.
Receive MMS and e-mail settings
Your phone can receive many kinds of text messages that
contain data (
), also called over-the-air (OTA)
messages:
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
When you open a multimedia message ( ), you may see
an image and a message, and simultaneously listen to a
sound through the loudspeaker (
is shown if sound is
included). Click the arrow in the icon to listen to the sound.
Business card—To save the information to Contacts,
select Options > Save business card. Certificates or sound
files attached to the business card are not saved.
Configuration message—You may receive a text message
service number, voice mailbox number, Internet access
point settings, access point login script settings, or e-mail
settings from your network operator, service provider, or
company information management department in a
configuration message. To save the settings, select
Options > Save all.
Data and settings
Multimedia messages
You may receive a notification that you have received a
multimedia message that is saved in the multimedia
message centre. To start a packet data connection to
retrieve the message to your phone, select Options >
Retrieve.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
To view received multimedia presentations, select
Options > Play presentation.
To see what kinds of media objects have been included in
the multimedia message, open the message, and select
Options > Objects. You can choose to save a multimedia
object file in your phone or send it, for example, through
a Bluetooth connection to another compatible device.
When you receive a message,
and the text 1 new
message are shown in the standby mode. Select Show to
open the message. To open a message in Inbox, scroll to it,
and press
Inbox icons:
—unread messages in Inbox;
—
unread text message;
—unread multimedia message;
—data received through a Bluetooth connection.
Inbox—receive messages
69
Messaging
70
Messaging
Web service messages ( ) are notifications (for
example, news headlines) and may contain a text message
or a link. For availability and subscription, contact your
service provider.
Web service messages
Tip! If you receive a vCard file that has a picture
attached, the picture is saved to contacts.
E-mail notification—Tells you how many new e-mails
you have in your remote mailbox. An extended
notification may list more detailed information.
When you scroll to your mailbox, and press
, the phone
asks you if you want to Connect to mailbox?.
When you open the mailbox, you can choose whether you
want to view the previously retrieved e-mail messages and
e-mail headings offline or connect to the e-mail server.
Open the mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. See ‘E-mail’, p. 75.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Mailbox
Tip! You can use texts in the templates folder to avoid
rewriting messages that you send often.
Calendar entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Web, select Options > Add to bookmarks. If the
message contains both access point settings and
bookmarks, to save the data, select Options > Save all.
In My folders, you can organize your messages into
folders, create new folders, and rename and delete folders.
My folders
Operator logo—For the logo to be shown in the standby
mode instead of the network operator’s own
identification, select Options > Save.
Ringing tone—To save the ringing tone, select Options >
Save.
mailbox, select Options > Retrieve e-mail.
New—to retrieve all new e-mail messages to your
phone.
Selected—to retrieve only the e-mail messages that
have been marked.
1 When you have an open connection to a remote
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
If you are offline, select Options > Connect to start a
connection to a remote mailbox.
Retrieve e-mail messages
Select No to view previously
retrieved e-mail messages
offline. When you view e-mail messages offline, your
phone is not connected to the remote mailbox.
Select Yes to connect to your
mailbox, and retrieve new email headings or messages.
When you view messages
online, you are continuously
connected to a remote
mailbox using a packet data
connection. See also
‘Connection settings’, p. 107.
Tip! If your mailbox uses the IMAP4 protocol, you can
define how many messages to retrieve, and whether to
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the phone; select Options >
Retrieve. In the Attachments view, you can retrieve,
open, save, or remove attachments. You can also send
attachments using a Bluetooth connection.
All—to retrieve all messages from the mailbox.
To stop retrieving messages, select Cancel.
2 After you have retrieved the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status icons:
New e-mail (offline or online mode): the content
has not been retrieved to your phone.
New e-mail: the content has been retrieved to
your phone.
The e-mail message has been read.
The e-mail heading that has been read and the
message content has been deleted from the phone.
3 To open an e-mail message, press . If the e-mail
message has not been retrieved (arrow in the icon is
pointing outwards) and you are offline, you are asked
if you want to retrieve this message from the mailbox.
71
Messaging
72
Messaging
If you are offline, the e-mail is deleted first from your
phone. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
To delete an e-mail from the phone and the remote
mailbox, select Options > Delete. In Delete msg. from:,
select Phone and server.
Tip! To copy an e-mail from the remote mailbox to a
folder under My folders, select Options > Copy to
folder, a folder from the list, and OK.
The phone mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your phone. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your phone to the remote mailbox again
to update the status.
To delete the contents of an e-mail message from the
phone while still retaining it in the remote mailbox, select
Options > Delete. In Delete msg. from:, select Phone
only.
Delete e-mail messages
retrieve the attachments. With the POP3 protocol, the
options are Headers only, Partially (kB), or Msgs. &
attachs..
When you open Mailbox the next time and you want to
view and read the e-mail messages offline, answer No to
the Connect to mailbox? query. You can read the
previously retrieved e-mail headings, the retrieved e-mail
messages, or both. You can also write new, reply to, or
forward e-mail to be sent the next time you connect to the
mailbox.
View e-mail messages when offline
Tip! You can also leave your mailbox connection open
and the new e-mails (Headers only as default) will be
retrieved from the remote mailbox to your phone
automatically (only if the IMAP IDLE function is
supported by your server). To leave the messaging
application open in the background, press
twice.
Leaving the connection open may increase your call
costs due to the data traffic.
When you are online, select Options > Disconnect to end
the packet data connection to the remote mailbox.
Disconnect from the mailbox
To cancel deleting an e-mail from the phone and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Undelete.
deleted are removed only after you have closed the
connection to the remote mailbox.
Example: Messages are placed in the outbox, for
example, when your phone is outside network coverage.
You can also schedule e-mail messages to be sent the next
time you connect to your remote mailbox.
Failed—The maximum number of sending attempts has
been reached. Sending has failed. If you were trying to
send a text message, open the message, and check that the
Sending options are correct.
Deferred—You can set documents to be on hold while they
are in Outbox. Scroll to a message that is being sent, and
select Options > Defer sending.
Resend at %U (time)—The phone will try to send the
message again after a time-out period. Select Send to
restart the sending immediately.
Waiting/Queued—The message will be sent when previous
messages of a similar type have been sent.
Sending—A connection is being made and the message is
being sent.
Status of the messages in Outbox are:
Outbox is a temporary storage place for messages waiting
to be sent.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is removed
Receive report ( )—To request the network to send
delivery reports on your messages. When set to No, only
the Sent status is shown in the log. See ‘Log’, p. 35.
Msg. center in use—Select which message centre is used
for delivering text messages.
Message centers—Lists all the text message centres that
have been defined.
Select Messaging > Options > Settings > Text message.
Text messages
Messaging settings
to a folder in your phone.
1 In the Messaging main view, select Options > SIM
messages.
2 Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3 Select Options > Copy. A list of folders opens.
4 Select a folder and OK to start copying. Open the
folder to view the messages.
Outbox—messages waiting View messages on a SIM card
to be sent
Before you can view SIM messages, you need to copy them
73
Messaging
74
Messaging
, write a name for the message centre, and
select OK.
3 Press
and
, and write the number of the text
message centre. You receive the number from your
service provider.
4 Select OK.
5 To use the new settings, go back to the settings view.
Scroll to Msg. center in use, and select the new
message centre.
2 Press
center.
1 Select Message centers > Options > New msg.
Add a new text message centre
Reply via same ctr. ( )—Choose Yes, if you want the
reply message to be sent using the same text message
centre number.
Preferred connection—You can send text messages
through the normal GSM network or through packet data,
if supported by the network. See ‘Connection settings’,
p. 107.
Message sent as—Change this option only if you are sure
that your message centre is able to convert text messages
into these other formats. Contact your network operator.
from the text message centre. The network must support
this feature. Maximum time is the maximum amount of
time allowed by the network.
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Aut. in home
network. Outside your home network, you receive a
notification that you have received a multimedia message
that is saved in the multimedia message centre. You can
select if you want to retrieve the message to your phone.
Access point in use (Must be defined)—Select which
access point is used as the preferred connection for the
multimedia message centre.
MMS creation mode —If you select Guided, the phone
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the phone
prevents you from sending messages that are not
supported.
Image size—Define the size of the image in a multimedia
message. The options are Original (shown only when the
MMS creation mode is set to Guided or Free), Small, and
Large. Select Original to increase the size of the
multimedia message.
Select Messaging > Options > Settings > Multimedia
message.
Multimedia messages
Tip! You may also obtain the multimedia and e-mail
settings from your service provider through a
configuration message. Contact your service provider
for more information. See ‘Data and settings’, p. 69.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is removed
from the multimedia messaging centre. The network must
support this feature. Maximum time is the maximum
amount of time allowed by the network.
Deny report sending—Select Yes if you do not want your
phone to send delivery reports of received multimedia
messages.
Receive report ( )—Select Yes if you want the status of
the sent message to be shown in the log. Receiving a
delivery report of a multimedia message that has been sent
to an e-mail address might not be possible.
Receive ads—Define whether you want to receive
multimedia message advertisements.
Allow anon. messages—Select No if you want to reject
messages from an anonymous sender.
If you select Multimedia retrieval > Always automatic,
your phone automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Outgoing mail server (Must be defined)—Enter the IP
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
My e-mail address (Must be defined)—Enter the e-mail
address given to you by your service provider. Replies to
your messages are sent to this address.
Access point in use (Must be defined)—Choose an
Internet access point (IAP) for the mailbox. See
‘Connection settings’, p. 107.
Mailbox name—Enter a descriptive name for the mailbox.
Mailbox settings:
Mailboxes—Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to do so. Select a mailbox to change the
following settings: Mailbox settings, User settings, and
Automatic retrieval.
Mailbox in use—Select which mailbox you want to use for
sending e-mail.
Select Messaging > Options > Settings > E-mail, or in
the mailbox main view, select Options > E-mail settings,
and select from the following:
E-mail
75
Messaging
76
Messaging
Send message—Define how e-mail is sent from your
User settings:
APOP secure login (not shown if IMAP4 is selected for
Mailbox type)—Used with the POP3 protocol to encrypt
the sending of passwords to the remote e-mail server
while connecting to the mailbox.
Security (ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
Mailbox type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you are using the POP3
protocol, e-mail messages are not updated automatically
in online mode. To see the latest e-mail messages, you
must disconnect and make a new connection to your
mailbox.
Incoming mail server (Must be defined)—Enter the IP
address or host name of the mail server that receives your
e-mail.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
User name—Enter your user name, given to you by your
service provider.
Automatic retrieval:
My name—Enter your own name here. Your name replaces
your e-mail address in the recipient’s phone when the
recipient’s phone supports this function.
Include signature—Select Yes if you want to attach a
signature to your e-mail messages.
Send copy to self—Select Yes to save a copy of the e-mail
to your remote mailbox and to the address defined in My
e-mail address.
Subscribed folders (not shown if the e-mail protocol is set
to POP3)—You can subscribe to other folders in the remote
mailbox and retrieve content from those folders.
Retrieve attachments (not shown if the e-mail protocol is
set to POP3)—Choose whether you want to retrieve e-mail
with or without attachments.
Retrieve (not shown if the e-mail protocol is set to
IMAP4)—Define which parts of the e-mails are retrieved:
Headers only, Partially (kB), or Msgs. & attachs.
E-mails to retrieve (not shown if the e-mail protocol is set
to POP3)—Define how many new e-mails are retrieved to
the mailbox.
phone. Select Immediately for the device to connect to the
mailbox when you select Send message. If you select
When conn. avail., e-mail is sent when the connection to
the remote mailbox is available.
Language—All allows you to receive cell broadcast
messages in all supported languages. Selected allows you
to choose in which languages you wish to receive cell
broadcast messages. If you cannot find the desired
language, select Other.
Reception—Choose whether you want to receive cell
broadcast messages.
Check the available topics and related topic numbers with
your service provider, and select Messaging > Options >
Settings > Cell broadcast to change the settings.
Cell broadcast
Select Messaging > Options > Settings > Service
message. Choose whether you want to receive service
messages. If you want to set the phone to automatically
activate the browser and start a network connection to
retrieve content when the phone receives a service
message, select Download messages > Automatically.
Web service messages
Activating Header retrieval may increase your call costs
due to the data traffic.
Header retrieval—When this function is on, messages are
retrieved automatically. You can define when, and how
often, the messages are retrieved.
New e-mail alerts—Choose whether you want to receive
the new e-mail indications, a tone or a note, when new
mail is received to the mailbox.
Tip! If Memory card is selected, activate the offline
profile before opening the memory card slot door or
removing the memory card. When the memory card is
not available, messages are saved in the phone
memory.
Memory in use—Choose the memory where you want to
save your messages: Phone memory or Memory card.
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message
is deleted.
Save sent messages—Choose if you want to save a copy
of every text message, multimedia message, or e-mail that
you have sent to the Sent folder.
Select Messaging > Options > Settings > Other.
Other settings
Topic detection—If you have set Topic detection > On,
the phone automatically searches for new topic numbers,
and saves the new numbers without a name to the topic
list. Select Off if you do not want to save new topic
numbers automatically.
77
Messaging
78
Calendar
, and select
Calendar > Options >
New entry and from the
following:
Meeting—To remind you
of an appointment that
has a specific date and
time.
Memo—To write a
general entry for a day.
Anniversary—To remind
you of birthdays or
1 Press
Create calendar entries
Tip! Regularly back up the phone information to the
memory card. You can restore the information, such as
calendar entries, to the phone later. See ‘Memory card
tool’, p. 25.
Shortcut: Press any key (
—
) in any calendar
view. A meeting entry opens, and the characters you
enter are added to the Subject field.
Calendar
To stop a calendar alarm, select Silence to turn off the
calendar alarm tone. The reminder text stays on the screen.
Select Stop to end the calendar alarm. Select Snooze to
set the alarm to snooze.
special dates. Anniversary entries are repeated every
year.
2 Fill in the fields. Use
to move between fields.
Alarm (meetings and anniversaries)—Select On, and
press
to fill in the Alarm time and Alarm date
fields.
in the day view indicates an alarm.
Repeat—Press
to change the entry to be repeating
( is shown in the day view).
Repeat until—You can set an end date for the repeated
entry.
Synchronization:
Private—after synchronization the calendar entry can
be seen only by you and it will not be shown to others
with online access to view the calendar.
Public—The calendar entry is shown to others who have
access to view your calendar online.
None—The calendar entry will not be copied to your PC
when you synchronize.
3 To save the entry, select Done.
to jump to today.
All entries—Deletes all calendar entries.
Before date—Deletes all calendar entries that take place
before a certain date you define.
Calendar views
Tip! Select Options > Settings to change the starting
day of the week or the view that is shown when you
open the calendar.
To remove more than one event at a time, go to the month
view, and select Options > Delete entry and one of the
following:
Removing past entries in Calendar saves space in your
phone memory.
Remove calendar entries
Press
To go to a certain date, select Options > Go to date, write
the date, and select OK.
Memo
Anniversary
There is no icon for Meeting.
Icons in the day and week views:
In the month view, dates that have calendar entries are
marked with a small triangle at the right bottom corner.
In the week view, memos and anniversaries are placed
before 8 o’clock. Press
to switch between the month
view, the week view, and the day view.
To delete a calendar alarm, open the entry in which you
want to delete an alarm, and select Alarm > Off.
You can set an alarm to remind you of meetings and
anniversaries.
1 Open an entry in which you want to set an alarm, and
select Alarm > On.
2 Set the Alarm time and Alarm date.
3 Scroll down to Repeat, and press
to select how
often you want the alarm to be repeated.
4 Select Done.
Set a calendar alarm
Tip! You can move calendar and to-do data from
many different Nokia phones to your phone or
synchronize your calendar and to-do to a compatible
PC using Nokia PC Suite. See the CD-ROM supplied with
the phone.
Tip! To send a calendar note to a compatible phone,
select Options > Send > Via text message, Via
multimedia, or Via Bluetooth.
79
Calendar
80
Calendar
To modify the Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options >
Settings.
Calendar settings
• Save the settings that are needed to access the Web
page that you want to use. See the sections ‘Receive
browser settings’, p. 81 or ‘Enter the settings manually’,
p. 81.
• Make a connection to the Web. See ‘Make a
connection’, p. 82.
• Start browsing the pages. See ‘Browse’, p. 83.
• End the connection to the Web. See ‘End a connection’,
p. 85.
Access the Web
Shortcut: To start a connection, press and hold
in the standby mode.
Check the availability of services, pricing, and tariffs with
your network operator or service provider. Service
providers will also give you instructions on how to use their
services.
Various service providers maintain pages specifically
designed for mobile devices. To access these pages, press
, and select Web. These pages use the wireless markup
language (WML), extensible hypertext markup language
(XHTML), or hypertext markup language (HTML).
Web
Follow the instructions given to you by your service
provider.
1 Select Tools > Settings > Connection > Access
points, and define the settings for an access point. See
‘Connection settings’, p. 107.
2 Select Web > Options > Bookmark manager > Add
bookmark. Write a name for the bookmark and the
address of the page defined for the current access
point.
3 To set the created access point as the default access
point in Web, select Web > Options > Settings >
Default access point.
Enter the settings manually
You may receive Web service settings in a special text
message from the network operator or service provider
that offers the Web page. See ‘Data and settings’, p. 69.
For more information, contact your network operator or
service provider.
Tip! Settings may be available on the Web site of a
network operator or service provider.
Receive browser settings
81
Web
82
Web
Any bookmark showing the title or Internet address of
the bookmark.
The automatic bookmarks folder contains bookmarks
( ) that are collected automatically when you browse
pages. The bookmarks in this folder are automatically
organized according to domain.
The starting page defined for the default access
point. If you use another default access point for
browsing, the starting page is changed accordingly.
Icons in the bookmark view:
Your device may have some bookmarks loaded for sites
not affiliated with Nokia. Nokia does not warrant or
endorse these sites. If you choose to access them, you
should take the same precautions, for security or content,
as you would with any Internet site.
Options in the bookmarks view are Open/
Download, Bookmark manager, Mark/Unmark,
Navigation options, Tools, Advanced options, Send,
Find bookmark, Details, Settings, Help, and Exit.
Glossary: A bookmark consists of an Internet address
(mandatory), bookmark title, access point, and if the
Web page requires, a user name and password.
Bookmarks view
Once you have stored all the required connection settings,
you can access the pages.
1 Select a bookmark or enter the address in the field
( ). When you enter the address, matching
bookmarks are shown above the field. Press
to
select a matching bookmark.
2 Press
to start to download the page.
Make a connection
Scroll to a bookmark, and select Options > Send > Via text
message. Press
to send. It is possible to send more
than one bookmark at the same time.
Send bookmarks
defined. The default access point is assigned to the
bookmark if no other one is selected. Press
to enter
special characters such as /, ., :, and @. Press
to
clear characters.
3 Select Options > Save to save the bookmark.
2 Start to fill in the fields. Only the URL address must be
manager > Add bookmark.
1 In the bookmarks view, select Options > Bookmark
Add bookmarks manually
Options when browsing (depending on the page you
are viewing) are Open, Accept, Remove file, Open in
viewer, Service options, Bookmarks, Save as
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
Browse
Security features may be required for some services, such
as banking services. For such connections you need
security certificates. For more information, contact your
service provider. See also ‘Certificate management’, p. 112.
Select Options > Details > Security to view details about
the connection, encryptions status, and information about
server and user authentication.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
If the security indicator
is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
Connection security
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages
either to the phone memory or on a memory card, and
Tip! To access the bookmarks view while browsing,
press and hold down
. To return to the browser view
again, select Options > Back to page.
To save a bookmark, select Options > Save as bookmark.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you have visited during a browsing session. The history list
is cleared each time a session is closed.
Shortcut: Use
to jump to the end of a page and
to the beginning of a page.
To open a link, to check boxes, and make selections, press
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
bookmark, Navigation options, Tools, Advanced
options, Show images, Send bookmark, Find, Details,
Settings, Help, and Exit.
83
Web
84
Web
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Downloaded items are handled by the respective
applications in your phone, for example, a downloaded
image is saved in Gallery.
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session
is displayed. You can also view the list by selecting
Options > Tools > Downloads. In the list, scroll to an
item, and select Options to pause, resume, or cancel
ongoing downloads, or open, save, or delete completed
downloads.
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
to the link, and press
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
To enter a new URL address, select Options > Navigation
options > Go to web address.
browse them when offline. To access the pages later, press
in the bookmarks view to open the Saved pages view.
in the bookmarks
to open a saved
To save a page while browsing, select Options > Advanced
options > Save page.
To open the saved pages view, press
view. In the saved pages view, press
page (
).
Options in the saved pages view are Open, Back to
page, Reload, Saved pages, Mark/Unmark, Navigation
options, Advanced options, Details, Settings, Help,
and Exit.
If you regularly browse pages containing information that
does not change very often, you can save and browse them
when offline. In the saved pages view you can also create
folders to store your saved browser pages.
View saved pages
Tip! Your browser collects bookmarks automatically
while you are browsing Web pages. The bookmarks are
stored to the automatic bookmarks folder (
) and
automatically organized according to domain. See also
‘Web settings’, p. 85.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
To continue the download, select Accept. To cancel the
download, select Cancel.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
3 Carefully read all the information provided.
example, ’Buy’.
1 To download the item, scroll to the link, and press .
2 Select the appropriate option to purchase the item, for
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
phone, for example, a downloaded photo can be saved in
Gallery.
Download and purchase items
To start a connection to the browser service and to
download the latest version of the page, select Options >
Reload. The phone stays online after you reload the page.
Show images—To select if you want to load images while
browsing or not. If you select No, to load images later
during browsing, select Options > Show images.
Default access point—To change the default access point,
press
to open a list of available access points. See
‘Connection settings’, p. 107.
Select Options > Settings and from the following:
Web settings
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed is stored in the cache. To empty the cache, select
Options > Advanced options > Clear cache.
The information or services you have accessed are stored
in the cache memory of the phone.
Empty the cache
Select Options > Advanced options > Disconnect to end
the connection and view the browser page offline, or
Options > Exit to end the connection and close the
browser.
End a connection
85
Web
86
Web
Cookies—To enable or disable the receiving and sending
of cookies.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Search page—To define a Web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
Homepage—To define the home page.
Screen size—To select what is shown when you are
browsing. Select Select. keys only or Full screen.
Automatic bookmarks—To disable automatic bookmark
collecting, select Off. If you want to continue collecting
automatic bookmarks but hide the folder from the
bookmarks view, select Hide folder.
Default encoding—If text characters are not shown
correctly, you may choose another encoding according to
language.
Font size—To choose the text size.
Confirm touch tones—Choose whether you want to
confirm before the phone sends DTMF tones during a voice
call. See also ‘Options during a voice call’, p. 34.
Security warnings—To hide or show security notifications.
Java/ECMA script—To enable or disable the use of scripts.
Glossary: Cookies are a means of content providers to
identify users and their preferences for frequently used
content.
2 Select
, or
3 Enter the percentage.
4 Select
percentage.
1 Enter a number for which you want to calculate a
Calculate percentages
To save a number in the memory (indicated by M), select
Options > Memory > Save. To retrieve a number in
memory, select Options > Memory > Recall. To clear a
number in memory, select Options > Memory > Clear.
Note: This calculator has limited accuracy and is
designed for simple calculations.
To add, substract, multiply, divide, calculate square roots
and percentages, press
, and select Office >
Calculator.
Calculator
Office
Note that Converter has limited accuracy, and rounding
errors may occur.
1 Scroll to the Type field, and press
to open a list of
measures. Scroll to the measure you want to use, and
select OK.
2 Scroll to the first Unit field, and press . Select the
unit from which you want to convert and OK. Scroll to
the next Unit field, and select the unit to which you
want to convert.
3 Scroll to the first Amount field, and enter the value
you want to convert. The other Amount field changes
automatically to show the converted value.
Press
to add a decimal and
for the +, - (for
temperature), and E (exponent) symbols.
Options in Converter are Select unit/Change
currency, Conversion type, Currency rates, Help, and
Exit.
To convert measures such as Length from one unit (Yards)
to another (Meters), press
, and select Office >
Converter.
Converter
87
Office
88
Office
Note: When you change base currency, you must
enter the new rates because all previously set
exchange rates are set to zero.
After you have inserted all the necessary exchange rates,
you can make currency conversions.
Press
, and select Office > To-do to write notes and
maintain a task list.
Before you can make currency conversions, you need to
choose a base currency and add exchange rates. The rate
of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
1 Select Converter > Options > Currency rates. A list of
currencies opens, and you can see the current base
currency at the top.
Tip! To rename a currency, go to the currency
rates view, scroll to the currency, and select
Options > Rename currency.
2 To change the base currency, scroll to the currency,
and select Options > Set as base curr..
3 Add exchange rates. Scroll to the currency, and enter
a new rate, that is, how many units of the currency
equal one unit of the base currency you have selected.
Press
, and select Office > Notes to write notes. You
can send notes to other compatible devices and save plain
text files (.txt format) that you receive to Notes.
Notes
To restore a task, scroll to it in the To-do list, and select
Options > Mark as not done.
To mark a task as completed, scroll to it in the To-do list,
and select Options > Mark as done.
To set the priority for the To-do note, scroll to the Priority
field, and press
to select the priority. The priority icons
are (High) and (Low). There is no icon for Normal.
To set the due date for the task, scroll to the Due date field,
and enter a date.
To add a note, press any key to start to write the task in the
Subject field.
Create a task list
To-do
Set base currency and exchange rates
Tip! To change the conversion order, enter the
value in the second Amount field. The result is
shown in the first Amount field.
Press
, and select Office > Recorder to record
telephone conversations and voice memos. If you are
recording a telephone conversation, both parties hear a
tone every 5 seconds during recording.
Recorder
89
Office
90
My own
Select the shortcut, and press . The default shortcuts
Notes, Calendar, and Inbox cannot be deleted.
Delete a shortcut
To store shortcuts (links to your favorite images, notes,
bookmarks, and so on), press
, and select My own > Go
to. Shortcuts are added only from the individual
applications, for example, Gallery. Not all applications
have this function.
1 Select an item from an application to which you want
to add a shortcut.
2 Select Add to ’Go to’. A shortcut in Go to is
automatically updated if you move the item to which
it is pointing (for example, from one folder to another).
To change the identifier in the lower left corner of the
shortcut icon, select Options > Shortcut icon.
Default shortcuts:
Opens Calendar
Opens Inbox
Opens Notes
Go to—add shortcuts
My own
, and select My own > IM.
Select Conversations to start or continue a conversation
with an IM user; IM contacts to create, edit, or view the
online status of your IM contacts; IM groups to start or
continue a group conversation with multiple IM users; or
Recorded chats to view a previous instant messaging
session that you have saved.
Options in the IM main view are Open, Login/
Logout, Settings, Help, and Exit.
Instant messaging allows you to converse with other
people using instant messages and join discussion forums
(IM groups) with specific topics. Various service providers
maintain IM servers that you can log in to once you have
registered to an IM service.
Press
IM—Instant messaging
(chat)
When you remove an application or a document which has
a shortcut in Go to, the shortcut icon of the removed item
is dimmed in the Go to view. The shortcut can be deleted
next time you start Go to.
in use. To change the IM server in use and save new IM
servers, see ‘Chat server settings’, p. 95.
2 Enter your user ID and password, and press
to log
in. You obtain the user ID and password for the IM
server from your service provider.
You can select Cancel to stay offline; to log in to the
IM server later, select Options > Login. You cannot
send or receive messages while you are offline.
1 Open IM to have your phone connect to the IM server
Tip: To log in automatically when you start IM, select
Options > Settings > Server settings > IM login
type > On app. start-up.
Connect to an IM server
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message from the network operator or service provider
that offers the IM service. See ‘Data and settings’, p. 69.
You can also enter the settings manually. See ‘Chat server
settings’, p. 95.
Receive IM settings
Note: Check the availability of chat services, pricing,
and tariffs with your network operator and/or service
provider. Service providers will also give you
instructions on how to use their services.
Availability reloading—To choose how to update
information about whether your IM contacts are online or
offline, select Automatic or Manual.
Sort IM contacts—To sort your IM contacts
Alphabetically or By online status.
Msg. scrolling speed—To select the speed at which new
messages are displayed.
Allow invitations from—To allow invitations only from
your IM contacts, select IM contacts only. IM invitations
are sent by IM contacts who want you to join their groups.
Allow messages from—To allow messages from all, select
All.
IM presence—To allow others to see if you are online,
select Active for all.
Use screen name (shown only if IM groups are supported
by the server)—To enter a nickname, select Yes.
Select Options > Settings > IM settings:
Modify your IM settings
3 To log out, select Options > Logout.
91
My own
92
My own
Options while chatting are Send, Send private
msg., Reply, Forward, Insert smiley, Send invitation,
Once you have joined an IM group, you can view the
messages that are exchanged there, and send your own
messages.
Chat
To leave the IM group, select Options > Leave IM group.
To join an IM group not on the list, but for which you
know the group ID, select Options > Join new group.
Enter the group ID, and press
To join an IM group that you have saved, scroll to the
group, and press
Join and leave an IM group
To search for users, in the IM contacts view, select
Options > New IM contact > Search from server. You
can search by User’s name, User ID, Phone number, and
E-mail address.
To search for groups, in the IM groups view, select
Options > Search. You can search by Group name, Topic,
and Members (user ID).
Search for IM groups and users
Unblock—To select the user that you want to remove from
the blocked list. Press
View blocked list—To see the participants whose
messages are being blocked.
Add ID to list manually—To enter the user ID of the
participant. Enter the ID, and press
Add to blocked list—To block messages from the currently
selected participant.
To prevent receiving messages from certain participants,
select Options > Blocking options, and select from the
following:
To invite IM contacts who are online to join the IM group,
select Options > Send invitation, select the contacts you
want to invite, write the invitation message, and press
To reply to a private message sent to you, select the
message, and select Options > Reply.
To send a private message to a participant, select
Options > Send private msg., select the recipient, write
the message, and press
To send a message, write the message in the message
editor field, and press
Leave IM group, Group, Record convers./Stop
recording, Help, and Exit.
.
Options when viewing a conversation are Send, Add
to IM contacts, Insert smiley, Forward, Record
convers./Stop recording, Blocking options, End
conversation, Help, and Exit.
To view a conversation, scroll to a participant, and press
Go to the Conversations view to see a list of the individual
conversation participants that you have an ongoing
conversation with.
View and start conversations
To view the recorded chats, in the main view, select
Recorded chats, select the conversation, and press
The recorded conversation files are automatically saved in
Recorded chats.
To record to a file the messages that are exchanged during
a conversation or while you are joined in a IM group, select
Options > Record convers., enter a name for the
conversation file, and press
. To stop recording, select
Options > Stop recording.
Options in the recorded chats view are Open,
Delete, Send, Mark/Unmark, Login/Logout, Settings,
Help, and Exit.
Record chats
To send automatic replies to incoming messages, select
Options > Set auto reply on. Enter the text, and select
Done. You can still receive messages.
To save a conversation participant to your IM contacts,
scroll to the participant, and select Options > Add to IM
contacts.
Enter user ID—To enter the user ID of the user you want
to start a conversation with, and press
Glossary: The user ID is provided by the service
provider to those who register to this service.
Select recipient—To see a list of your chat contacts that
are currently online. Scroll to the contact that you want to
start a conversation with, and press
To start a new conversation, select Options > New
conversation:
To close the conversation, select Options > End
conversation. Ongoing conversations are automatically
closed when you exit IM.
To return to the conversations list without closing the
conversation, select Back.
To continue the conversation, write your message, and
press
93
My own
94
My own
View participants—To see who are currently joined to the
group.
Details—To see the group ID, topic, participants,
administrators of the group (shown only if you have the
Switch tracking on—To have the phone notify you every
time the chat contact goes online or offline.
Delete—To delete a saved or created group that you are
currently not joined to.
Save—To save an unsaved group that you are currently
joined to.
Scroll to a group, select Options > Group and one of the
following:
Go to the IM groups view to see a list of the IM groups that
you have either saved or are currently joined to.
Options in the IM groups view are Open, Join new
group, Create new group, Leave IM group, Group,
Search, Login/ Logout, Settings, Help, and Exit.
Manage IM groups
Reload user availab.—To update information about
whether the contact is online or offline. The online status
is shown by an indicator next to the contact name. This
option is not available if you have set the Availability
reloading to Automatic in IM settings.
Belongs to groups—To see which groups the chat contact
has joined.
Open conversation—To start a new conversation or
continue an ongoing conversation with the contact.
Select from the following options:
To change the chat contact list, select Options > Change
contact list.
To move a contact from a list on the server to the retrieved
list, select Options > New IM contact > Move from
other list.
To create a new contact, select Options > New IM
contact > Enter manually. Fill in the Nickname and User
ID fields, and select Done.
Options in the IM contacts view are Open
conversation, Contact details, Change contact list,
Reload user availab., Belongs to groups, New IM
contact, Move to other list, Edit, Delete, Switch
tracking on, Blocking options, Login/Logout,
Settings, Help, and Exit.
Go to the IM contacts to retrieve chat contact lists from
the server, or to add a new chat contact to a contact list.
When you log in to the server, the previously used chat
contact list is retrieved from the server automatically.
IM contacts
Chat server settings
Group name, Group topic, and Welcome note—To add
details that the participants see when they join the group.
Group members—See ‘Add and remove group members’, p.
95.
Editing rights—To define the chat group participants to
whom you want to give rights to invite contacts to join the
IM group and edit the group settings.
Allow search—To define if others can find the chat group
by searching.
To change the IM server to which you wish to connect,
select Default server.
Select Options > Settings > Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the chat
service. You obtain the user ID and password from your
service provider when you register to the service. If you do
not know your user ID or password, contact your service
provider.
To remove a member from the IM group, scroll to the
member, and select Options > Remove. To remove all
members, select Options > Remove all.
You can edit the settings for an IM group if you have
administrator rights to the group. The user who creates a
group is automatically given administrator rights to it.
Group size—To define the maximum number of members
allowed to join the group.
To add members to a group, select IM groups, scroll to an
IM group, and select Options > Group > Settings > Group
members > Selected only or All.
Add and remove group members
Group ID—The group ID is created automatically and
cannot be changed.
Allow private msgs.—To allow messaging between
selected participants only.
Banned list—Enter the participants that are not allowed
to join the IM group.
Select IM groups > Options > Create new group. Enter
the settings for the group.
Create a new IM group
Administrate an IM group
Settings—To view and edit the chat group settings. See
‘Create a new IM group’, p. 95.
editing rights), the list of blocked participants (shown only
if you have the editing rights), and whether private
conversations are allowed in the group.
95
My own
96
My own
Password—Enter your login password.
User ID—Enter your user ID.
Web address—Enter the URL address of the IM server.
Access point in use—Select the access point you want to
use for the server.
Server name—Enter the name for the chat server.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
settings:
This device is compliant with Bluetooth Specification 1.2
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Handsfree Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, and Basic Imaging Profile. To ensure
Since devices with Bluetooth technology communicate
using radio waves, your phone and the other device do not
need to be in direct line-of-sight. The two devices only
need to be within 10 metres of each other, although the
connection may be subject to interference from
obstructions such as walls or from other electronic devices.
You can connect wirelessly to other compatible devices
with Bluetooth technology. Compatible devices may
include mobile phones, computers, and enhancements
such as headsets and car kits. You can use Bluetooth
technology to send images, video clips, music and sound
clips, and notes; to connect wirelessly to your compatible
PC to, for example, transfer files; or to connect to a
compatible printer to print images with Image print. See
‘Image print’, p. 57.
Bluetooth connection
Connectivity
Press
, and select Connect. > Bluetooth.
Bluetooth connection settings
When the device is locked, you cannot use the Bluetooth
connection. See ‘Security’, p. 110 for more information on
locking the device.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduces the battery life.
There may be restrictions on using Bluetooth technology
in some locations. Check with your local authorities or
service provider.
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example the Handsfree Profile is used between the
handsfree device and the phone. For devices to be
compatible, they must support the same profiles.
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
97
Connectivity
98
Connectivity
There can be several active Bluetooth connections at a
time. For example, if you are connected to a headset, you
can also transfer files to another compatible device at the
same time.
Send data using a Bluetooth
connection
Do not pair with an unknown device.
When you are not using Bluetooth, set Bluetooth Off, or
select My phone’s visibility > Hidden.
Security tips
My phone’s name—Define a name for your phone. After
you have set a Bluetooth connection and changed My
phone’s visibility to Shown to all, your phone and this
name can be seen by other users with devices using
Bluetooth technology.
My phone’s visibility—To allow your phone to be found by
other devices with Bluetooth technology, select Shown to
all. To hide it from other devices, select Hidden.
Bluetooth—Set to On or Off. To connect wirelessly to
another compatible device, first set Bluetooth On, and
then establish a connection.
Select from the following:
is stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item, for example an image, and select
Options > Send > Via Bluetooth. The phone searches
for devices within range. Devices with Bluetooth
technology that are within range start to appear on the
display one by one. You can see a device icon, the name
of the device, the device type, or a short name.
Tip! If you have searched for devices earlier, a list
of the devices that were found previously is shown
first. To start a new search, select More devices. If
you switch off the phone, the list is cleared.
Device icons:
—Computer; —Phone;
—Audio or video;
—
Headset;
—Other.
1 Open an application where the item you want to send
Bluetooth connection indicators
• When is shown in the standby mode, a Bluetooth
connection is active.
• When
is blinking, your phone is trying to connect
to the other device.
• When
is shown continuously, the Bluetooth
connection is active.
Tip! To send text using a Bluetooth connection
(instead of text messages), open Notes, write the text,
and select Options > Send > Via Bluetooth.
to open the paired
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. The passcode is used only once.
In the Bluetooth main view, press
devices view (
).
Glossary: Pairing means authentication. The users of the
two devices with Bluetooth technology should agree on
a common passcode, and use the same passcode for
both devices in order to pair them. Devices that do not
have a user interface have a factory-set passcode.
Pair devices
Tip! When searching for devices, some devices may
show only the unique addresses (device addresses). To
find the unique address of your phone, enter the code
*#2820# in the standby mode.
The Sent folder in Messaging does not store messages sent
using a Bluetooth connection.
To interrupt the search, press Stop. The device list
freezes.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 99.
5 When the connection has been established, Sending
data is shown.
in the device search.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
Set as authorized—Connections between your phone and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust.
indicates authorized devices in the paired
devices view.
To set a device to be authorized or unauthorized, scroll to
a device, and select from the following options:
Tip! To define a short name (nickname or alias) for a
paired device, scroll to the device, and select Options >
Assign short name in the paired devices view. This
name helps you to recognize a certain device during
device search or when a device requests a connection.
Paired devices are indicated by
To pair with a device, select Options > New paired device.
The phone starts a device search. Select the device. Enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
99
Connectivity
100
Connectivity
You can use your phone with a variety of PC connectivity
and data communications applications. With Nokia PC
Suite you can, for example, synchronize contacts,
calendar and To-do notes, and transfer images between
your phone and a compatible PC. For further information
on how to install Nokia PC Suite (compatible with
Windows 2000 and Windows XP), see the User Guide for
PC connections
To switch off Bluetooth connectivity, select Bluetooth >
Off.
Switch off Bluetooth connectivity
When you receive data using a Bluetooth connection, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is shown, and the item is
placed in the Inbox folder in Messaging. Messages
received using a Bluetooth connection are indicated by
. See ‘Inbox—receive messages’, p. 69.
Receive data using a Bluetooth
connection
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately and the connection will be switched off.
Tip! When using Nokia PC Suite for the first time, to
connect your phone to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite. See the CD-ROM supplied in the sales
package.
You can use your phone as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using a Bluetooth connection or a data cable. Detailed
installation instructions can be found in the User Guide for
Nokia PC Suite in Modem options on the CD-ROM.
Your phone as a modem
The CD-ROM should launch after you have inserted it into
the CD-ROM drive of a compatible PC. If not, proceed as
follows: Open Windows Explorer, right-click the CD-ROM
drive where you inserted the CD-ROM, and select
Autoplay.
CD-ROM
Nokia PC Suite and the Nokia PC Suite help in the ‘Install’
section on the CD-ROM.
To close all currently open connections, select Options >
Disconnect all.
To end a connection, scroll to a connection, and select
Options > Disconnect.
You may have multiple data connections active at the
same time when you are using your phone in GSM and
UMTS networks. Press
, and select Connect. > Conn.
mgr. to view the status of multiple data connections, view
details on the amount of data sent and received, and end
connections. When you open Conn. mgr., you can see the
following:
• Open data connections: data calls ( ) and packet
data connections ( )
• The status of each connection
• The amount of data uploaded and downloaded for each
connection (shown for packet data connections only)
• The duration of each connection (shown for data calls
only)
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Connection manager
Name—Access point name used.
Dial-up—The dial-up number used.
Speed—The current speed of both sending and receiving
data in kilobytes per second.
Duration—The length of time that the connection has
been open.
Sent—The amount of data, in bytes, sent from the phone.
Received—The amount of data, in bytes, received to the
phone.
Status—The current status of the connection:
Connecting, Conn.(inact.), Conn.(active), On hold,
Disconnctng., or Disconnected.
Bearer—The type of data connection: Data call, High sp.
GSM, or Packet data.
Name—The name of the Internet access point (IAP) in use,
or the modem connection name if the connection is a
dial-up connection.
To view the details of a connection, scroll to a connection,
and select Options > Details.
Options in the Conn. mgr. main view when there
are one or more connections are Details, Disconnect,
Disconnect all, Help, and Exit.
View data connection details
101
Connectivity
102
Connectivity
want to create a new profile. Select Yes.
1 If no profiles have been defined, the phone asks if you
Options in the Sync main view are Synchronize,
New sync profile, Edit sync profile, Delete, View log,
Set as default, Help, and Exit.
Create a new syncronisation profile
You may receive syncronisation settings in a special text
message. See ‘Data and settings’, p. 69.
The syncronisation application uses SyncML technology
for synchronisation. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronize your
phone data with.
Press
, and select Connect. > Sync. Sync enables you
to synchronize your notes, calendar, and contacts with
various calendar and address book applications on a
compatible computer or on the Internet.
Remote synchronization
Shared (not shown if the connection is not shared)—The
number of applications using the same connection.
To create a new profile in addition to existing ones,
select Options > New sync profile. Choose whether
you want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2 Define the following:
Sync profile name—Write a descriptive name for the
profile.
Data bearer—Select the connection type: Web, or
Bluetooth.
Access point (shown only if Data bearer is set to
Web)—Select an access point to use for the data
connection.
Host address—The IP address of the host server.
Contact your service provider or system administrator
for the correct values.
Port (shown only if Data bearer is set to Web)—
Contact your service provider or system administrator
for the correct values.
User name—Your user ID for the syncronisation server.
Contact your service provider or system administrator
for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow sync requests—Select Yes if you want to allow
the server to start a syncronisation.
In the Sync main view, you can see the different
syncronisation profiles and the kind of data to be
synchronized.
1 Select a syncronisation profile and Options>
Synchronize. The status of the syncronisation is shown
at the bottom of the screen.
Synchronize data
Accept all sync reqs.—Select No if you want the phone
to ask you before a syncronisation initialized by the
server is started.
Network authentic. (shown only if Data bearer is set
to Web)—Select Yes to enter a network user name and
password. Press
to view the user name and
password fields.
Press
to select Calendar, Contacts, or Notes.
• Select Yes if you want to synchronize the selected
database.
• In Remote database, select the synchronisation
type: Normal (two-way synchronisation), To server
only, or To phone only.
• Select Synchronization type: Normal (two-way
syncronisation), To server only, or To phone only.
Enter a correct path to the remote calendar, address
book, or notes database on the server.
3 Select Back to save the settings and return to the main
view.
To allow or deny receiving of configuration settings from
a service provider, select Enable config. or Disable
config..
To connect to a server and receive configuration settings
for your phone, select Start configuration.
Press
, and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your phone.
Device manager
To cancel syncronisation before it finishes, select
Cancel.
2 You are notified when the syncronisation is complete.
After syncronisation is complete, select Options >
View log to open a log file showing the syncronisation
status (Complete or Incomplete) and how many
calendar or contact entries, or notes have been added,
updated, deleted, or discarded (not synchronized) in
the phone or on the server.
103
Connectivity
104
Connectivity
Auto-accept all reqs.—If you want the phone to ask for
confirmation before accepting a configuration from the
server, select No.
Allow configuration—To receive configuration settings
from the server, select Yes.
User name and Password—Enter your user name and
password.
Port—Enter the port number of the server.
Host address—Enter the URL address of the server.
Access point—Select an access point to be used when
connecting to the server.
Session mode— Select Bluetooth or Web.
Server password—Enter a password to identify your
phone to the server.
Server ID—Enter the unique ID to identify the
configuration server.
Server name—Enter a name for the configuration server.
Contact your service provider for the correct settings.
Server profile settings
Changing the settings for Phone language or Writing
language affects every application in your phone, and the
change remains effective until you change these settings
again.
Phone language—Changing the language of the display
texts in your phone also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the phone restarts.
General
Phone settings
To change settings, press
, and select Tools > Settings.
Scroll to a setting group, and press
to open it. Scroll to
a setting you want to change, and press
Settings
Tools
Active standby—Use shortcuts to applications in the
standby mode on the main display. See ‘Active standby
mode’, p. 17.
Standby mode
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 111. After resetting, the
phone may take a longer time to power on. Documents
and files are unaffected.
Welcome note or logo—The welcome note or logo is
displayed briefly each time you switch on the phone.
Select Default to use the default image, Text to write a
welcome note (up to 50 letters), or Image to select a photo
or picture from Gallery.
Predictive text—You can set the predictive text input On
or Off for all editors in the phone. The predictive text
dictionary is not available for all languages.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
105
Tools
106
Tools
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if
you want the operator logo to show or not.
You can also assign keypad shortcuts for the different
presses of the scroll key, by selecting an application from
the list. The scroll key shortcuts are not available if the
active standby is on.
Active standby apps.—To select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
Right selection key—To assign a shortcut to the right
selection key (
) in the standby mode, select an
application from the list.
Left selection key—To assign a shortcut to the left
selection key (
) in the standby mode, select an
application from the list.
Call waiting ( )—If you have activated call waiting, the
network notifies you of a new incoming call while you
have a call in progress. Select Activate to request the
Send my caller ID ( )—You can set your phone number
to be displayed to (Yes) or hidden from (No) the person to
whom you are calling, or the value may be set by your
network operator or service provider when you make a
subscription (Set by network).
Call settings
Light time-out—Select a time-out after which the
backlight of the main display is switched off.
Screen saver timeout—The
screen saver on the main
display is activated when the
timeout period is over.
Brightness—You can change
the brightness of the main
display to lighter or darker.
The brightness of the display
is automatically adjusted
according to the
environment.
Display
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, and
1-touch dialing—Select On, and the numbers assigned to
the 1-touch dialing keys (
) can be dialed by
pressing and holding the key. See also ‘1-touch dial a
phone number’, p. 28.
Summary after call—Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
Automatic redial—Select On, and your phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press
Image in video call—You can deny video sending when
you receive a video call. Select a still image to be displayed
instead of video.
Message text—Write a text to be sent in a text message
when you reject a call.
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or reject a call’, p. 33.
network to activate call waiting, Cancel to request the
network to deactivate call waiting, or Check status to
check if the function is active or not.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
Glossary: General packet radio service (GPRS) uses
packet data technology where information is sent in
short packets of data over the mobile network.
Your phone supports packet data connections ( ), such as
GPRS in the GSM network.
Data connections and access points
Connection settings
Line change ( )—To prevent line selection, select Line
change > Disable if supported by your SIM card. To
change this setting, you need the PIN2 code.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line in use ( )—This setting is shown only if the SIM
card supports two subscriber numbers, that is, two phone
lines. Select which phone line you want to use for making
calls and sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you select
Line 2 and have not subscribed to this network service,
you will not be able to make calls. When line 2 is selected,
is shown in the standby mode.
107
Tools
108
Tools
GSM network, multiple packet data connections are
active.
GSM network, packet data connection is active, data is
being transferred.
GSM network, packet data is available in the network.
The following indicators may be displayed below the
signal indicator, depending on which network you use:
When you use your phone in GSM and UMTS networks,
multiple data connections can be active at the same time
and access points can share a data connection. In the
UMTS network, data connections remain active during
voice calls. To check the active data connections, see
‘Connection manager’, p. 101.
Packet data connections in GSM and UMTS
networks
Check the type of access point you need with your service
provider for the service you wish to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Follow the instructions given to you by your service
provider.
Tip! See also ‘Receive MMS and e-mail settings’, p. 68,
‘E-mail’, p. 75, and ‘Access the Web’, p. 81.
Access points
An access point may be protected ( ) by your network
operator or service provider. Protected access points
cannot be edited or deleted.
To create a new access point, press
, and select Tools >
Settings > Connection > Access points.
You may receive access point settings in a text message
from a service provider, or you may have preset access
point settings in your phone. See ‘Data and settings’, p. 69.
Receive access point settings
UMTS network, packet data connection is on hold.
UMTS network, multiple packet data connections are
active.
UMTS network, packet data connection is active, data is
being transferred.
UMTS network, packet data is available in the network.
GSM network, packet data connection is on hold. (This
can happen during a voice call, for example.)
Authentication—Select Normal or Secure.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
The password is often case-sensitive.
Prompt password—If you must enter a new password
every time you log in to a server, or if you do not want to
save your password in the phone, select Yes.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
The user name is often case-sensitive.
Access point name (for packet data only)—The access
point name is needed to establish a connection to the
packet data and UMTS networks. You obtain the access
point name from your network operator or service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Data bearer—Depending on what data connection you
select, only certain setting fields are available. Fill in all
fields marked with Must be defined or with a red asterisk.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
Connection name—Give a descriptive name for the
connection.
Proxy port number—Enter the proxy port number.
Proxy serv. address—Define the address for the proxy
server.
Glossary: The domain name service (DNS) is an
Internet service that translates domain names such as
www.nokia.com into IP addresses like
192.100.124.195.
Name servers—In Primary name server:, enter the IP
address of the primary DNS server. In Second. name
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Phone IP address (for IPv4)—Enter the IP address of your
phone.
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend
on the selected network type.
Select Options > Advanced settings to change the
following settings:
Homepage—Depending on what you are setting up, write
the Web address or the address of the multimedia
messaging centre.
109
Tools
110
Tools
See ‘Clock settings’, p. 23.
Date and time
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in Configurations.
Configurations
Access point—The access point name is needed to use
your phone as a packet data modem to your computer.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the phone
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select When needed, the
phone uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select When available, the phone
periodically tries to establish a packet data connection.
The packet data settings affect all access points using a
packet data connection.
Packet data
Autolock period—You can set an autolock period, a
time-out after which the phone automatically locks and
can be used only if the correct lock code is entered. Enter
a number for the time-out in minutes, or select None to
turn off the autolock period.
If you forget any of these codes, contact your service
provider.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See ‘Glossary of PIN and
lock codes’, p. 111.
PIN code request—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See ‘Glossary of PIN and
lock codes’, p. 111.
Phone and SIM
Security
See also the language settings in ‘General’, p. 105.
. A list of
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN
If you forget any of these codes, contact your service
provider.
Glossary of PIN and lock codes
Confirm SIM services ( )—You can set the phone to
display confirmation messages when you are using a SIM
card service.
When calls are limited to closed user groups, calls still may
be possible to the official emergency number programmed
into your device.
Closed user group ( )—You can specify a group of
people to whom you can call and who can call you.
Lock if SIM changed—You can set the phone to ask for the
lock code when an unknown SIM card is inserted into your
phone. The phone maintains a list of SIM cards that are
recognized as the owner’s cards.
Tip! To lock the phone manually, press
commands opens. Select Lock phone.
When the device is locked, calls still may be possible to the
official emergency number programmed into your device.
To unlock the phone, enter the lock code.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your phone.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card
is in your phone.
Lock code (also known as security code)—This code (5
digits) can be used to lock the phone to avoid
unauthorized use. The factory setting for the lock code is
12345. To avoid unauthorized use of your phone, change
the lock code. Keep the new code secret and in a safe place
separate from your phone.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your phone.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones. The UPIN code
protects the USIM card against unauthorized use.
code is blocked, and you need to unblock it before you can
use the SIM card again. See the information about the
PUK code in this section.
111
Tools
112
Tools
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Options in the certificate management main view
are Certificate details, Delete, Trust settings,
Mark/Unmark, Help, and Exit.
In the certificate management main view, you can see a
list of authority certificates that are stored in your phone.
Press
to see a list of personal certificates, if available.
Glossary: Digital certificates are used to verify the
origin of the XHTML or WML pages and installed
software. However, they can only be trusted if the
origin of the certificate is known to be authentic.
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
Certificate management
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
• Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the trust
settings’, p. 113.
• Expired certificate—The period of validity has ended
for the selected certificate.
• Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
• Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
You are notified on the phone display if the identity of the
server is not authentic or if you do not have the correct
security certificate in your phone.
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
View certificate details—check authenticity
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
Call forwarding allows you to forward your incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
1 Press
, and select Tools > Settings > Call
forwarding.
2 Select which calls you want to forward: Voice calls,
Data and video calls, or Fax calls.
Call forwarding
Select Options > Edit trust setting to change the value.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
• Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
• Internet: Yes—The certificate is able to certify servers.
• App. installation: Yes—The certificate is able to certify
the origin of a new Java application.
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Change the trust settings
is shown in the
When calls are restricted, calls still may be possible to
certain official emergency numbers.
Call restrictions and call forwarding cannot be active at
the same time.
Call restriction allows you to restrict the calls that you
make or receive with the phone. To change the settings,
you need the restriction password from your service
provider. Select the desired restriction option, and set it on
(Activate) or off (Cancel), or check whether the option is
active (Check status). Call restriction affects all calls,
including data calls.
Call restriction
Call restrictions and call forwarding cannot be active at
the same time.
When all calls are forwarded,
standby mode.
calls when your number is busy or when you reject
incoming calls, select If busy.
4 Set the forwarding option on (Activate) or off
(Cancel), or check whether the option is activated
(Check status). Several forwarding options can be
active at the same time.
3 Select the desired forwarding option. To forward voice
113
Tools
114
Tools
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Operator selection—Select Automatic to set the phone
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
Network mode (shown only if supported by the
operator)—Select which network to use. If you select Dual
mode, the phone uses the GSM or UMTS network
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Your phone can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with
Network
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See ‘Profiles—Set tones’, p. 15.
Select Headset, Loopset, or Bluetooth handsfree, and the
following options are available:
Indicators shown in the standby mode:
A headset is connected.
A loopset is connected.
A car kit with Bluetooth technology is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Enhancement settings
Cell info display—Select On to set the phone to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
To activate enhanced voice commands for starting
applications or profiles, you must open the Voice com.
application and its Profiles folder. Press
, and select
Tools > Voice com. > Profiles; the phone creates voice
tags for the applications and profiles. You can now use
enhanced voice commands by pressing and holding the
capture key and saying a voice command. The voice
You can use voice commands to control your phone. For
more information about the enhanced voice commands
supported by your phone, see ‘Voice dialing’, p. 28.
Voice commands
Power saver—Select the cover display power saver type, its
time-out period, and if an image or an animation screen
saver is shown after the time-out period before the power
saver is activated.
Wallpaper—Select the background image and how time is
displayed on the cover display in the standby mode.
Brightness—To change the brightness of the cover display,
close the fold, and adjust the brightness on the cover
display with the joystick.
Cover display settings
Press
, and select Tools > Manager. You can install
two types of applications and software to your phone:
• J2ME™ applications based on Java™ technology with
the extension .jad or .jar ( ). Do not download
PersonalJava™ applications to your phone, as they
cannot be installed.
• Other applications and software suitable for the
Symbian operating system (
). The installation files
Application manager
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
phone language, select Synthesizer > Off. To reset voice
recognition learning, for example, when the main user of
the phone has changed, select Remove my adapts..
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, scroll to it, select Options >
Change command, and enter the new voice command as
text. Avoid very short names, abbreviations, and acronyms.
command is the name of the application or profile
displayed in the list.
115
Tools
116
Tools
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Application icons are as follows:
.sis application;
Java application;
application is not fully installed;
application is installed on the memory card.
Tip! You can also use Nokia Application Installer
available in Nokia PC Suite to install applications. See
the CD-ROM supplied with the phone.
Install applications and software
Example: If you have received the installation file as
an e-mail attachment, go to your mailbox, open the
e-mail, open the attachments view, scroll to the
installation file, and press
to start installation.
Installation files may be transferred to your phone from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using a Bluetooth connection. You can use
Nokia Application Installer in Nokia PC Suite to install an
application to your phone or a memory card. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
have the .sis extension. Only install software
specifically designed for your Nokia XXXX device.
Before installation, note the following:
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
• To display the security certificate details of the
application, select Options > View certificate. See
‘Certificate management’, p. 112.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
• The .jar file is required for installing Java applications.
If it is missing, the phone may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1 Open Manager, and scroll to an installation file.
Alternatively, search the phone memory or the memory
card in File mgr., or open a message in Messaging >
Inbox that contains an installation file.
Select the application, and press
to start the
installation.
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
Remove applications and software
To send your installation log to a help desk so that they can
see what has been installed or removed, select Options >
Send log > Via text message or Via e-mail (available only
if the correct e-mail settings are in place).
To see what software packages have been installed or
removed and when, select Options > View log.
To start a network connection and to view extra
information about the application, scroll to it, and select
Options > Go to web address, if available.
To start an installed application, locate it in the menu, and
press
Tip! While browsing, you can download an
installation file and install it without closing the
connection.
2 Select Options > Install.
During installation, the phone shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the phone displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components.
In the Manager main view, scroll to an application, and
select Options > Suite settings to change settings related
to that specific application.
Default web address—Set the default address used when
checking online certificates.
Online certif. check—Select to check the online
certificates before installing an application.
Software installation—Select if Symbian software can be
installed: On, Signed only, or Off.
Select Options > Settings and from the following:
Application settings
Note: If another software package depends on the
software package that you removed, the other
software package may stop working. Refer to the
documentation of the installed software package for
details.
If you remove software, you can only reinstall it if you
have the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
117
Tools
118
Tools
To view detailed information such as the validity status
and ability to send the file, select an activation key, and
press
To view which keys are not in use at the moment (Not
used), press
twice. Unused activation keys have no
media files connected to them saved in the phone.
To buy more usage time or extend the usage period for a
media file, select an activation key, and Options >
Activate content. Activation keys cannot be updated if
Web service message reception is disabled. See ‘Web
service messages’, p. 77.
Press
, and select Tools > Activation keys to view the
digital rights activation keys stored in your phone:
• Valid keys ( ) are connected to one or more media
files.
• With expired keys ( ), you have no time to use the
media file, or the time period for using the file is
exceeded. To view the Expired activation keys, press
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Activation keys—handle
copyright-protected files
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
Q: What should I do when the phone cannot receive a
multimedia message because memory is full?
Multimedia messaging
A: If another device is connected to your phone, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
Q: Why can’t I end a Bluetooth connection?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 metres and that there are no walls or other
obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
Q: Why can’t I find my friend’s device?
Bluetooth connectivity
Q&A
Troubleshooting
A: To stop the phone from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging centre save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the phone still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—To reject all
incoming multimedia messages. After this change, the
phone needs to send information notes to the network,
and the multimedia messaging centre deletes multimedia
messages that are waiting to be sent to you.
Multimedia reception > Off—To ignore all incoming
Q: How can I end the data connection when the phone starts
a data connection again and again?
A: The phone is trying to retrieve a multimedia message from
the multimedia messaging centre.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multimedia message.
Q: The note Retrieving message is shown briefly. What is
happening?
consume, select File manager > Options > Memory
details.
119
Troubleshooting
120
Troubleshooting
A: Insert the correct browser settings. Contact your service
provider for instructions.
Q: What do I do if the following message is displayed: No
valid access point defined. Define one in Web settings.?
Browser services
A: If you have changed the calendar settings so that the week
starts on a day other than Monday, the week numbers are
not shown.
Q: Why are the week numbers missing?
Calendar
A: The camera is started automatically when you activate the
Imaging mode or the Camera mode. See ‘Modes’, p. 19.
Q: Why is the camera application not in the main menu?
A: Ensure that the camera lens protection window is clean.
Q: Why do images look smudgy?
Camera
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.
Q: Why can’t I select a contact?
Messaging
multimedia messages. After this change, the phone does
not make any network connections related to multimedia
messaging.
A: The default lock code is 12345. If you forget or lose the lock
code, contact your phone dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
Q: What is my password for the lock, PIN, or PUK codes?
Access codes
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the User Guide for Nokia PC Suite on the
CD-ROM. If Nokia PC Suite is installed and running, you
can use Nokia Get connected wizard available in Nokia PC
Suite to connect to your PC. For further information on
how to use Nokia PC Suite, see the help function on Nokia
PC Suite or visit the support pages at www.nokia.com.
Q: Why do I have problems in connecting the phone to my PC?
PC connectivity
A: Select Connect. > Log > Options > Clear log or go to
Settings > Log duration > No log. These will erase the log
contents, recent calls register, and message delivery
reports permanently.
Q: How do I delete my log information?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all events,
select Connect. > Log > Options > Filter > All
communication.
Q: Why does the log appear empty?
Log
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
• Messages from Inbox, Drafts, and Sent folders in
Messaging
• Retrieved e-mail messages from the phone memory
• Saved browser pages
• Images and photos in Gallery
A: You can delete the following items regularly to avoid
memory getting low:
Q: What can I do if my phone memory is low?
Memory low
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my phone?
Phone display
A: Open the application switching window by pressing and
holding
. Then scroll to the application, and press to
close the application.
Q: How do I close an application that is not responding?
Application not responding
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), service provider, or network operator.
• Use Nokia PC Suite to make a back up copy of all data to
a compatible computer.
• Send images to your e-mail address, and then save the
images to your computer.
• Send data using a Bluetooth connection to a compatible
device.
• Store data on a compatible memory card.
A: Save your data using one of the following methods:
Q: How can I save my data before deleting it?
multiple items and any of the following notes are shown: Not
enough memory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
121
Troubleshooting
122
Troubleshooting
A few practical rules about accessories and enhancements:
Your device and its enhancements may contain small parts.
Keep them out of reach of small children.
Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with
this particular model. The use of any other types
may invalidate any approval or warranty, and may
be dangerous. For availability of approved
enhancements, please check with your dealer.
12 and LCH-12 chargers when used with the charging
adapter CA-44.
Check the model number of any charger before use with this
device. This device is intended for use when supplied with
power from DC-4, AC-3 and AC-4 chargers, and from ACP-
If you want to enhance phone
functionality, a range of
enhancements is available for
you. You can select any of these
items to help accommodate your
specific communication needs.
For availability of these and
other enhancements, contact
your dealer. Protective carrying cases and straps for your Nokia
XXXX mobile phone are available for purchase and can be
located at www.nokiausa.com.
Enhancements
• Connectivity Cable (DKU-2, CA-53)
• Wireless Keyboard (SU-8W)
• MultiMediaCard
• MU-1 (64MB)
• MU-2 (128MB)
• MU-9 (256MB)
• MU-12 (512MB)
• Wireless GPS Module (LD-1W)
Data
• Battery, 900 mAh, Li-ion (BL-5B)
• Travel chargers (DC-4, AC-3, and AC-4)
• Mobile charger ()
Power
• Keep all accessories and enhancements out of the reach of
small children.
• When you disconnect the power cord of any accessory or
enhancement, grasp and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle
are mounted and are operating properly.
• Installation of any complex car enhancements must be
made by qualified personnel only.
123
Enhancements
124
Enhancements
• Nokia Remote Camera (PT-6)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Wireless Plug-in Car Handsfree (HF-6W)
Mobile Charger (DC-4)
Wireless Car Kit (CK-1W)
Headrest Handsfree (BHF-3)
Plug-in Car Handsfree (HF-3)
Advanced Car Kit (CK-7W)
Car
• Inductive Lopset (LPS-4)
• TTY Adapter (HDA-10)
Accessibility
Wireless Boom Headset (HS-4W)
Wireless Headset (HDW-3)
Wireless Clip-on Headset (HS-21W)
Wireless Image Headset (HS-13W)
Headset (HS-5)
Boom Headset (HDB-4)
Fashion Stereo Headset (HS-3)
Stereo Headset (HDS-3)
Music Stand (MD-1)
Audio Adapter (AD-15)
Inductive Lopset (LPS-4)
TTY Adapter (HDA-10)
Imaging and lifestyle
Audio
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it
from an authorized Nokia dealer, look for the Nokia Original
Nokia battery authentication
guidelines
The BL-5B battery provides up to X hours of talk time and up
to X days of standby time. Operation times are estimates and
may vary depending on network conditions, charging, and
device use.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 59°F and 77°F (15°C and 25°C). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, buy a new battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave the battery connected to a
charger. Overcharging may shorten its lifetime. If left unused,
a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to
charge.
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Charging and discharging
Battery information
125
Battery information
126
Battery information
left, right, down, and up, you
should see 1, 2, 3, and 4 dots on
each side respectively.
2 When you angle the hologram
the label, you should see the
Nokia connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another angle.
1 When looking at the hologram on
Authenticate hologram
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic original
Nokia battery, you should refrain from using it and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Enhancements logo on the packaging and inspect the
hologram label using the following steps:
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
What if your battery is not authentic?
valid by following the instructions
at www.nokia.com/batterycheck.
4 Confirm that the 20-digit code is
reveal a 20-digit code, for example
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed by
the bottom row.
3 Scratch the side of the label to
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types of
liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, remove the
battery and allow the device to dry completely before
replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as instructed
in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
Care and maintenance
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as
contacts and calendar notes) before sending your device
to a service facility.
127
Care and maintenance
128
Additional safety information
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Remember to follow any special regulations in force in
any area and always switch off your device when its use
is prohibited or when it may cause interference or danger.
Parts of the device are magnetic. Metallic materials may be
attracted to the device, and persons with a hearing aid should
not hold the device to the ear with the hearing aid. Do not
In order to transmit data files or messages, this device
requires a quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is
completed.
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 15.3 cm (6 in) be maintained between
a wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. To
minimize the potential for interference, persons with
pacemakers should:
• Always keep the device more than 15.3 cm (6 in) from their
pacemaker when the device is switched on
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker.
Medical devices
Operating environment
Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in
the normal use position against the ear or when
positioned at least 1.5 cm (5/8 in) away from the body.
When a carry case, belt clip, or holder is used for bodyworn operation, it should not contain metal and should
position the device the above-stated distance from your
body.
place credit cards or other magnetic storage media near the
device, because information stored on them may be erased
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Additional safety information
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not store
or carry flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or enhancements.
For vehicles equipped with an air bag, remember that air bags
inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer
or its representative of your vehicle or any equipment that has
been added.
Vehicles
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
If you have any reason to suspect that interference is taking
place, switch off your device immediately.
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of
Emergency calls
Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Potentially explosive environments
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
129
Additional safety information
130
Additional safety information
Warning: You cannot make emergency calls in the
Imaging mode, because the keypad is not active. To make
an emergency call, activate the Fold open mode.
Warning: In the offline profile you cannot make (or
receive) any calls, except make calls to certain emergency
numbers, or use other features that require network
coverage.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2 Press
as many times as needed to clear the display
and ready the device for calls.
3 Enter the official emergency number for your present
location. Emergency numbers vary by location.
4 Press the
key.
1 If the device is not on, switch it on. Check for adequate
To make an emergency call:
this, connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device for
essential communications like medical emergencies.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the international guidelines is 2.0
watts/kilogram (W/kg) averaged over ten grams of tissue. Tests
for SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be well below the maximum value
because the device is designed to use only the power required
to reach the network. That amount changes depending on a
number of factors such as how close you are to a network base
station. The highest SAR value when tested according to
international testing procedures for use at the ear for device
type RM-42 is 0.29 W/kg. Your phone’s device type is listed on
the label located under the battery.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy recommended by
international guidelines (ICNIRP). These limits establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards and
guidelines include a substantial safety margin designed to
assure the safety of the public, regardless of age and health and
to account for any variations in measurements..
THE NOKIA N90-1 DEVICE MEETS THE GOVERNMENT'S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES
Certification information (SAR)
USA and Canada: The SAR limit of USA (FCC) and Canada (IC)
is 1.6 W/kg averaged over one gram of tissue. Device type
RM-42 has also been tested against this SAR limit. The highest
SAR value reported under this standard during product
certification for use at the ear is 0.22 W/kg and when properly
worn on the body is 0.54 W/kg. Information about this device
can be found on the FCC's website at  by searching the equipment authorization system
using FCC ID: QURRM-42.
SAR values may vary depending on national reporting and
testing requirements and the network band. Use of device
accessories and enhancements may result in different SAR
values. Additional SAR information may be provided under
product information at www.nokia.com.
131
Additional safety information
132
Additional safety information
Up to 2 W
Transmitter output power
Battery voltage
Operating temperature
14°F to + 131°F (15°C to + 25°C)
3.7 V dc
GSM 900
880–915 MHz (TX)
925–960 MHz (RX)
GSM 1800
1710–1785 MHz (TX)
1805–1880 MHz (RX)
GSM 1900
1850–1910 MHz (TX)
1930–1990 MHz (RX)
WCDMA
1920-1980
2110-2170
Size Volume: 7.69 in3 (126 cm3)
Length: 4.42 in (112.31 mm)
Width: 2.05 in (51.98 mm)
Thickness: 0.96 in (24.45 mm)
6.1 oz (173 g) with BL-5B Li-Ion Battery
Specification
Frequency range
Feature
Weight
Size
Technical Information

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 132
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5cd5477a-38a3-4325-9c98-bbef992b4e7f
Producer                        : Acrobat Distiller 6.0 (Windows)
Modify Date                     : 2005:04:25 17:22:52-05:00
Create Date                     : 2005:04:25 17:22:52-05:00
Document ID                     : uuid:69d24b93-834c-4cf7-9354-da1f6550898c
Format                          : application/pdf
Title                           : untitled

EXIF Metadata provided by EXIF.tools