Microsoft RM-420 GSM/WCDMA cellular phone w/BT and WLAN User Manual Exhibit08 User Guide

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT and WLAN Exhibit08 User Guide

Manual

Download:
Mirror Download [FCC.gov]
Document ID	944125
Application ID	MULh91Okufhr9W+PV0PETw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	131.21kB (1640166 bits)
Date Submitted	2008-05-20 00:00:00
Date Available	2008-06-16 00:00:00
Creation Date	2008-05-07 11:48:30
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-05-07 11:50:22
Document Title	Exhibit08_User_Guide.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	mode

E66 User Guide
2222222
Issue 1
Cyan Magenta Yellow Black
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-420 product is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at
www.nokia.com/phones/declaration_of_conformity/.
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia Care, Eseries, E66, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Nokia tune
is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective
owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia
is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2008. Tegic Communications, Inc. All rights reserved.
This product includes software licensed from Symbian Software Ltd ©1998-2008. Symbian and Symbian OS are trademarks of Symbian
Ltd.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
Portions of the Nokia Maps software are ©1996-2008 The FreeType Project. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which
has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in
connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY
LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION
TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME
WITHOUT PRIOR NOTICE.
Cyan Magenta Yellow Black
Reverse engineering of any software in the Nokia device is prohibited to the extent permitted by applicable law. Insofar as this user guide contains
any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall likewise limit any representations, warranties,
damages and liabilities of Nokia's licensors.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for
details, and availability of language options.
The availability of some features may vary by region. Please contact your operator for more details.
This product runs on Series 60 – 3rd edition operational system. Before purchasing or installing an application, please check with the application
developer or provider for application compatibility with this specific edition.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user's authority to operate this equipment.
ANATEL
Modelo E66-3 (RM-420)
Este produto está homologado pela Anatel de acordo com os procedimentos regulamentados
pela Resolução número 242/2000 e atende aos requisitos técnicos aplicados, incluindo os
limites de exposição da taxa de Absorção Específica referente a campos elétricos, magnéticos
e eletromagnéticos de radiofreqüência, de acordo com a Resolução número 303/2002.
www.anatel.gov.br
“Este equipamento opera em carater
secundario, isto e, nao tem direito a
protecao contra interferencia prejudicial,
mesmo de estacoes do mesmo tipo, e nao
pode causar interferencia a sistemas
operando em carater primario.”
2222222/Issue 1
Cyan Magenta Yellow Black
Contents
Safety...........................................................7
About your device...........................................................7
Network services.............................................................8
Battery removing............................................................8
E66 in brief...................................................9
Key features.....................................................................9
Keys and parts...............................................................10
Key moves......................................................................11
Set up your device......................................13
Insert the SIM card and battery...................................13
Charge the battery........................................................14
Insert the memory card................................................14
Eject the memory card..................................................15
Connect the headset.....................................................15
Attach the wrist strap...................................................15
Antennas........................................................................15
Get started.................................................17
First start-up..................................................................17
Welcome........................................................................17
Settings wizard.............................................................18
Home screen..................................................................18
Menu...............................................................................18
Switch.............................................................................19
Common actions in several applications....................20
Display indicators..........................................................21
Volume control..............................................................23
Memory..........................................................................23
Write text.......................................................................24
Further information......................................................25
New from Eseries.......................................27
Access tasks quickly......................................................27
Home screen..................................................................27
One-touch keys..............................................................28
Nokia Calendar for Eseries............................................29
Nokia Contacts for Eseries............................................30
Multitasking...................................................................32
Personalisation..........................................33
Profiles...........................................................................33
Select ringing tones......................................................33
Customise profiles.........................................................34
Personalise the home screen.......................................34
Change the display theme............................................35
Download a theme........................................................35
3-D ringing tones..........................................................35
Media..........................................................36
Camera...........................................................................36
Nokia Podcasting..........................................................38
Music player...................................................................40
Share online...................................................................42
Recorder.........................................................................43
Gallery............................................................................43
RealPlayer......................................................................44
Flash player....................................................................46
Radio..............................................................................46
Cyan Magenta Yellow Black
Internet......................................................48
Travelling...................................................84
Web................................................................................48
Browse the intranet .....................................................50
Download!......................................................................50
Internet access points..................................................51
Connect PC to web.........................................................53
About GPS and satellite signals...................................84
Positioning settings......................................................85
Maps...............................................................................85
GPS data.........................................................................89
Landmarks.....................................................................90
Messaging..................................................55
Nokia Office Tools......................................92
Messaging folders.........................................................55
Organise messages.......................................................56
Message reader.............................................................56
Speech............................................................................56
E-mail messages............................................................57
Text messages...............................................................59
Multimedia messages...................................................61
Instant messaging........................................................64
Special message types..................................................66
Cell broadcast................................................................67
Messaging settings.......................................................67
Active notes...................................................................92
Calculator.......................................................................93
File manager..................................................................93
Quickoffice.....................................................................93
Converter........................................................................94
Zip manager...................................................................95
PDF reader......................................................................95
Printing..........................................................................95
Clock...............................................................................96
Notes..............................................................................97
Nokia Wireless Keyboard..............................................97
Phone.........................................................72
Connectivity...............................................99
Voice calls.......................................................................72
Video calls......................................................................73
Net calls..........................................................................75
Speed dialling................................................................77
Call divert.......................................................................77
Call barring.....................................................................77
Bar net calls...................................................................78
Send DTMF tones...........................................................78
Voice mail......................................................................78
Voice aid.........................................................................79
Voice commands...........................................................79
Push to talk....................................................................81
Log..................................................................................82
Fast downloading.........................................................99
Nokia PC Suite................................................................99
Data cable......................................................................99
Infrared........................................................................100
Bluetooth.....................................................................100
SIM access profile........................................................103
Wireless LAN................................................................103
Modem.........................................................................105
Connection manager..................................................106
Security and data management..............107
Lock the device............................................................107
Memory card security.................................................107
Cyan Magenta Yellow Black
Encryption....................................................................108
Fixed dialling...............................................................108
Certificate manager....................................................109
Security modules.........................................................110
Back up data................................................................111
Remote configuration................................................111
Application manager..................................................112
Activation keys............................................................114
Data synchronisation..................................................115
Mobile VPN...................................................................116
Barcode reader............................................................118
Additional safety information.................145
Small children..............................................................145
Operating environment..............................................145
Medical devices...........................................................145
Vehicles........................................................................146
Potentially explosive environments.........................146
Emergency calls...........................................................147
CERTIFICATION INFORMATION (SAR)...........................147
Index........................................................149
Settings....................................................119
General settings..........................................................119
Telephone settings.....................................................123
Connection settings....................................................124
Application settings....................................................129
Shortcuts..................................................130
General shortcuts........................................................130
Glossary....................................................132
Troubleshooting......................................136
Enhancements..........................................139
Battery and charger information.............140
Battery and charger information..............................140
Nokia battery authentication guidelines.................141
Care and maintenance.............................143
Disposal........................................................................144
Cyan Magenta Yellow Black
Safety
Read these simple guidelines. Not following them may
be dangerous or illegal. Read the complete user guide
for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may
cause interference or danger.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect
performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off
in aircraft, near medical equipment, fuel,
chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or
repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it
dry.
About your device
The wireless device described in this guide is approved
for use on the (E)GSM 850, 900, 1800, and 1900
networks and UMTS 850/2100 HSDPA networks.
Contact your service provider for more information
about networks.
When using the features in this device, obey all laws
and respect local customs, privacy and legitimate
rights of others, including copyrights.
Copyright protection may prevent some images, music,
and other content from being copied, modified, or
transferred.
Your device supports several methods of connectivity.
Like computers, your device may be exposed to viruses
and other harmful content. Exercise caution with
messages, connectivity requests, browsing, and
downloads. Only install and use services and other
software from trustworthy sources that offer adequate
security and protection against harmful software, such
as applications that are Symbian Signed or have passed
the Java Verified™ testing. Consider installing antivirus
Cyan Magenta Yellow Black
and other security software on your device and any
connected computer.
Your device may have preinstalled bookmarks and links
for third-party internet sites. You may also access other
third-party sites through your device. Third-party sites
are not affiliated with Nokia, and Nokia does not
endorse or assume liability for them. If you choose to
access such sites, you should take precautions for
security or content.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed
or modified.
Remember to make back-up copies or keep a written
record of all important information stored in your
device.
When connecting to any other device, read its user
guide for detailed safety instructions. Do not connect
incompatible products.
The images in this guide may differ from your device
display.
all networks; other networks may require that you
make specific arrangements with your service provider
before you can use the network services. Your service
provider can give you instructions and explain what
charges will apply. Some networks may have
limitations that affect how you can use network
services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If
so, these features will not appear on your device menu.
Your device may also have a special configuration such
as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this
device, such as e-mail, browsing, and multimedia
messaging (MMS), require network support for these
technologies.
Battery removing
Always switch the device off and disconnect the
charger before removing the battery.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on
Cyan Magenta Yellow Black
E66 in brief
Model number: Nokia E66-3 (RM-420).
Hereinafter referred to as Nokia E66.
Access your e-mail while on the move.
Key features
Stay up-to-date and plan your meetings with
Calendar.
Your new Eseries device helps you manage your
business and personal information in and out of office.
Some of the key features are highlighted here:
Manage your business partners and free time
friends with the new Contacts application.
Switch from business to personal mode.
Make calls using voice over IP services with
Internet tel..
Browse the internet, find blogs and receive
news feeds with Web.
Connect to WLAN with WLAN wiz..
Listen to music with Music player.
View documents, spreadsheets, and
presentations with Quickoffice.
Get podcasts to your device with Podcasting.
Add new applications to your device with
Download!
Find points of interest with Maps.
Cyan Magenta Yellow Black
Keys and parts
10
1 — Power key
2 — Earpiece
3 — Light sensor
4 — Selection key. Press the selection key to perform
the function shown above it on the display.
5 — Call key
6 — Press the key for a few seconds to switch on
Bluetooth connectivity. When writing text, press the
key and select More symbols to access special
characters.
7 — Microphone
8 — Camera (video calls only)
9 — Navi™ scroll key, hereafter referred to as the scroll
key. Press the scroll key to enter a selection, to scroll
left, right, up, and down on the display. A long press
left, right, up, or down accelerates the scrolling.
10 — End key. Press the end key to reject a call, end
active calls and held calls, and with a long keypress, end
data connections.
11 — Backspace key. Press the key to delete items.
12 — Shift key. When writing text, press and hold the
key and select the text with the scroll key. Press this
key for a few seconds to toggle between the Silent and
General profiles. The availability of this option depends
on the network operator. Please check with network
operator for this option availability.
13 — Charger connector
1 — Volume up key
Cyan Magenta Yellow Black
2 — Voice key. Press the voice key to mute and unmute
the active call. This key is also used in the Voice
commands and Push to talk applications.
3 — Volume down key
4 — Capture key
5 — Release button
6 — Headset connector
7 — Micro-USB port
8 — Infrared port
1 — Home key
2 — Contacts key
3 — E-mail key
4 — Calendar key
Automatic display rotation
In all applications, the screen rotates automatically
from portrait to landscape when you turn the device to
the left. For example, if you are browsing the web and
turn the device to the left, the image rotates
accordingly and changes to full screen. To display the
control and status panes, press either selection key.
The image changes to full screen in RealPlayer,
browser, and image viewer.
To turn off the automatic display rotation or changing
to full screen, select MenuToolsSettings
GeneralPersonalisationDisplayDisplay
rotation or Turn to full view.
Silence the device
Key moves
Your device rotates the display automatically when you
move it and responds to tapping and turning. Scroll key
lights notify you of events, and the slide enables
answering and ending calls and locking the keypad.
To set calendar and clock alarms to snooze and to
silence incoming calls, turn the device face down.
You can also silence the device by tapping it twice. To
turn on silencing by tapping, select MenuTools
SettingsGeneralPersonalisationTones
Tap to silenceOn.
11
Cyan Magenta Yellow Black
To turn off silencing by tapping or
turning, select MenuTools
SettingsGeneral
PersonalisationTonesTap
to silence or Turn to silence.
Scroll key lights
When you receive a message or miss a call, the scroll
key starts blinking to indicate the event. When the
display light turns off, the scroll key starts blinking
slowly.
To set the length of time for blinking for missed events
or to select of which events you want to be notified,
select MenuToolsSettingsGeneral
PersonalisationNotification light.
To turn off slow blinking, select MenuTools
Profiles and a profile. Select Personalise
Breathing light.
To open or close the full-size keypad, push the slide up
or down.
To lock the keypad, close the slide. To unlock
the keypad, open the slide.
Tip: To unlock the keypad without
opening the slide, press the left and
then the right selection key.
To answer a call, open the slide. To end the
call, close the slide, unless you have a headset
connected to the device, or you select
Options before closing the keypad.
To change the slide settings, select MenuTools
SettingsGeneralSlide handling.
The keypad of your device locks automatically to
prevent the keys from being accidentally pressed. To
change the period after which the keypad is locked,
select MenuToolsSettingsGeneral
SecurityPhone and SIM cardKeypad autolock
period.
Slide function
When the device or keypad is locked, calls may be
possible to the official emergency number
programmed into your device.
12
Cyan Magenta Yellow Black
Set up your device
Set up your E66 following these instructions.
Insert the SIM card and
battery
1. With the back of the device facing you, press the
release buttons (1) and slide the back cover off (2).
3. Insert the SIM card. Make sure that the contact area
on the card is facing the connectors on the device
and that the bevelled corner is facing the top of the
device.
2. If the battery is inserted, lift the battery in the
direction of the arrow to remove it.
4. Insert the battery. Align the contacts of the battery
with the corresponding connectors on the battery
compartment and insert in the direction of the
arrow.
13
Cyan Magenta Yellow Black
5. Slide the back cover back to place.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
Your battery has been precharged at the factory, but
the charging levels may vary. To reach the full
operation time, charge the battery until it has been
fully charged according to the battery level indicator.
Tip: If you have old compatible Nokia chargers,
you can use them with the Nokia E66 by
attaching the CA-44 charger adapter to the old
charger. The adapter is available as a separate
enhancement.
Insert the memory
card
Charge the battery
1. Connect a compatible charger to a wall outlet.
2. Connect the power
cord to the device. If
the battery is
completely
discharged, it may
take a while before
the charging indicator
starts scrolling.
Use a memory card to save the memory on your device.
You can also back up information from your device to
the memory card.
Memory card may already be inserted in your device.
Memory cards are also available as separate
enhancements.
1. With the back of the device facing you, press the
release buttons (1) and slide the back cover off (2).
14
Cyan Magenta Yellow Black
2. Insert the memory card in the slot with the contact
area first. Make sure that the contact area is facing
the connectors on the device.
Connect the headset
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not use the
headset where it can endanger your safety.
Connect the compatible headset to the headset
connector of your device.
3. Push the card in until it locks into place.
4. Close the back cover.
Eject the memory card
Important: Do not remove the memory card in the
middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
1. Press the power key briefly, and select Remove
memory card.
2. Press the release buttons and slide off the back
cover.
3. Press the end of the memory card to release it from
the memory card slot.
4. Close the back cover.
Attach the wrist strap
Thread the wrist strap as shown, and tighten it.
Antennas
Your device may have internal and external antennas.
As with any radio transmitting device, avoid touching
Cyan Magenta Yellow Black
15
the antenna area unnecessarily while the antenna is
transmitting or receiving. Contact with such an
antenna affects the communication quality and may
cause the device to operate at a higher power level
than otherwise needed and may reduce the battery
life.
16
Cyan Magenta Yellow Black
Get started
After you have set up your device, switch it on and start
to explore what is new in Eseries.
First start-up
configure some settings automatically. You can also
contact your service provider for the correct settings.
You can switch the device on without inserting the SIM
card. The device starts up in the offline mode, and you
cannot use the network-dependent phone functions.
1. Press and hold the power key.
2. If the device asks for a PIN code or
lock code, enter the code, and
select OK.
3. When prompted, enter the country
in which you are located and the
current date and time. To find your
country, enter the first letters of the
country name. It is important to
select the correct country, because
scheduled calendar entries may
change if you change the country
later and the new country is located
on a different time zone. The
Welcome application opens.
4. Select from the various options, or
Exit to close the application.
To switch the device off, press and hold the power key.
To configure the various settings in your device, use
the wizards available on the home screen and in the
Settings wizard application. When you switch the
device on, it may recognise the SIM card provider and
To open the Welcome application later, select Menu
HelpWelcome.
The available items may vary between regions.
Welcome
When you switch on your device for the first time, the
Welcome application opens. Select from the following:
ವ Tutorial provides information about your device
and shows you how to use it.
ವ Switch enables you to transfer content, such as
contacts and calendar entries, from a compatible
Nokia device. See "Transfer content between
devices", p. 20.
ವ Settings wizard helps you configure various
settings. See "Settings wizard", p. 18.
ವ Operator contains a link to your operator's home
portal.
Cyan Magenta Yellow Black
17
Settings wizard
Select MenuToolsSett. wizard.
Settings wizard configures your device for settings
based on your network operator information. To use
these services, you may have to contact your service
provider to activate a data connection or other
services.
The availability of the different settings items in
Settings wizard depends on the features of the device,
SIM card, wireless service provider, and the availability
of the data in the Settings wizard database.
If Settings wizard is not available from your service
provider, it may not appear in the menu of your device.
To start the wizard, select Start. When you use the
wizard for the first time, you are guided through the
settings configuration. If there is no SIM card inserted,
you need to select the home country of your service
provider, and your service provider. If the country or
service provider suggested by the wizard is not correct,
select the correct one from the list. If the settings
configuration is interrupted, the settings are not
defined.
18
To access the main view of the Settings wizard after
the wizard has finished the settings configuration,
select OK.
In the main view, select Options and from the
following:
ವ Operator — Configure operator-specific settings
such as MMS, internet, WAP, and streaming settings.
ವ E-mail settings — Configure e-mail settings.
ವ Push to talk — Configure push-to-talk settings.
ವ Video sharing — Configure video sharing settings.
If you are not able to use Settings wizard, visit the
Nokia phone settings web site.
Home screen
From the home screen you can quickly access features
that you use the most, and see at a glance any missed
calls or new messages.
You can define two separate home screens for different
purposes, such as one screen to show your business email and notifications, and another to show your
personal e-mail. This way, you do not have to see
business-related messages outside office hours.
Menu
Select Menu.
Cyan Magenta Yellow Black
The menu is a starting point
from which you can open all
applications in the device or
on a memory card.
The menu contains
applications and folders,
which are groups of similar
applications. All
applications you install in
the device yourself are by
default saved in the
Installations folder.
To move an application to a different folder, scroll to
the application you want to move, and select
OptionsMove to folder, the new folder, and OK.
To download applications from the web, select
OptionsDownload applications.
Switch
To open an application,
scroll to it, and press the
scroll key.
To view the applications in a list, select Options
Change viewList view. To return to the grid view,
select OptionsChange viewGrid view.
To make the application icons and folders animated,
select OptionsIcon animationOn.
To view the memory consumption of different
applications and data stored on the device or memory
card and to check the amount of free memory, select
OptionsMemory details.
To create a new folder, select OptionsNew
folder.
To rename a new folder, select OptionsRename.
To rearrange the folder, scroll to the application you
want to move, and select OptionsMove. A check
mark is placed beside the application. Scroll to a new
location, and select OK.
Select MenuToolsSwitch.
You can transfer content, such as contacts, from a
compatible Nokia device to your new Eseries device
using Bluetooth connectivity or infrared. The type of
content that can be transferred depends on the device
model. If the other device supports synchronisation,
you can also synchronise data between the two devices
or send data from this device to the other device.
When you transfer data from your previous device, it
may require you to insert the SIM card. Your new Eseries
device does not need a SIM card when transferring
data.
Content is copied from the memory of the other device
to the corresponding location in your device. Copying
time depends on the amount of data to be transferred.
You can also cancel and continue later.
The necessary steps for data transfer may vary
depending on your device, and whether you have
interrupted data transfer earlier. The items that you
can transfer vary depending on the other device.
Cyan Magenta Yellow Black
19
Transfer content between
devices
Synchronise, retrieve, and
send data
To connect the two devices, follow the instructions on
the display. For some device models, the Switch
application is sent to the other device as a message. To
install Switch on the other device, open the message,
and follow the instructions on the display. On your new
Eseries device, select the content you want to copy
from the other device.
After the data transfer, you can save the shortcut with
the transfer settings to the main view to repeat the
same transfer later. To edit the shortcut, select
OptionsShortcut settings.
If you have previously transferred data to your device
with the Switch application, select from the following
icons in the Switch main view:
View transfer log
A transfer log is shown after every transfer.
To view the transfer details, scroll to the transferred
item in the log, and select OptionsDetails.
To view the log of a previous transfer, scroll to a
transfer shortcut, if available, in the main view, and
select OptionsView log.
Any unresolved transfer conflicts are also displayed in
the log view. To start solving conflicts, select
OptionsSolve conflicts.
Synchronise data with a compatible device if the
other device supports synchronisation. With
synchronisation, you can keep the data up-to-date in
both devices.
Retrieve data from the other device to your new
Eseries device.
Send data from your new Eseries device to your
other device.
Common actions in
several applications
You can find the following actions in several
applications:
To change the profile, or switch off or lock the device,
press the power key briefly.
20
Cyan Magenta Yellow Black
If an application consists of
several tabs (see figure),
open a tab by scrolling right
or left.
To select an object (for example, an attachment in a
document) scroll to the object so that square markers
appear on each side of the object.
To save the settings that you
have configured in an
application, select Back.
Display indicators
The device is being used in a UMTS network
(network service).
To save a file, select
OptionsSave. There are
different saving options
depending on the
application you use.
The battery charge level. The higher the bar,
the stronger the charge in the battery.
To send a file, select
OptionsSend. You can send a file in an e-mail or
multimedia message, or using Bluetooth connectivity
or infrared.
To copy, press and hold the shift key, and select the text
with the scroll key. Press and hold the shift key, and
select Copy. To paste, scroll to where you want to paste
the text, press and hold the shift key, and select
Paste. This method may not work in applications that
have their own copy and paste commands.
To select different items, such as messages, files, or
contacts, scroll to the item you want to select. Select
OptionsMark/UnmarkMark to select one item
or OptionsMark/UnmarkMark all to select all
items.
Tip: To select almost all items, first select
OptionsMark/UnmarkMark all, then
select the items you do not want, and Options
Mark/UnmarkUnmark.
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
There are messages waiting to be sent in the
Outbox folder in Messaging.
You have one or more missed phone calls.
The keys of the device are locked.
An alarm is active.
You have selected the Silent profile, and the
device does not ring for an incoming call or
message.
Cyan Magenta Yellow Black
21
Bluetooth is active.
You have set the device to scan for WLANs, and
a WLAN is available.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking,
your device is trying to connect with another
device.
An infrared connection is active. If the indicator
blinks, your device is trying to connect to the
other device, or the connection has been lost.
A GPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
22
A WLAN connection is active in a network that
does not have encryption.
A WLAN connection is active in a network that
has encryption.
Your device is connected to a computer with a
USB data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If
you have two phone lines, a number indicates
the active line.
A headset is connected to the device.
A UMTS packet data connection is available
(network service). If the icon is , the
connection is active. If the icon is , the
connection is on hold.
The connection to a headset with Bluetooth
connectivity has been lost.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The
icon may vary between regions. If the icon is
, the connection is active. If the icon is , the
connection is on hold.
A loopset is connected to the device.
A hands-free car kit is connected to the device.
A text phone is connected to the device.
Cyan Magenta Yellow Black
Your device is synchronising.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not
disturb mode, because the ringing type setting
of your device is set to Beep once or Silent, or
you have an incoming or ongoing phone call.
In this mode, you cannot make PTT calls.
Volume control
To adjust the earpiece volume during a phone call or
the volume of the media applications, use the volume
keys.
Memory
There are two types of memory into which you can save
data or install applications: device memory and
memory card.
Free memory
To see how much memory is currently in use, how
much free memory remains, and how much memory is
consumed by each data type, select Menu
OptionsMemory detailsPhone memory or
Memory card.
Tip: To ensure that you have adequate memory,
transfer data regularly to a memory card or
computer, or use File manager to delete files you
no longer need.
After you install applications to a compatible memory
card, installation files (.sis, .sisx) remain in the device
memory. The files may use large amounts of memory
and prevent you from storing other files. To maintain
sufficient memory, use Nokia PC Suite to back up
installation files to a compatible PC, then use the file
manager to remove the installation files from the
device memory. If the .sis file is a message attachment,
delete the message from the Messaging inbox.
Memory card
Select MenuToolsMemory.
If you cannot use a memory card in your device, you
may have the wrong type of memory card, the card may
not be formatted for your device, or the card has a
corrupted file system. Your Nokia device supports the
FAT16 and FAT32 file system for memory cards.
MicroSDHC
This device uses microSD and microSDHC
memory cards.
To ensure interoperability, use only
compatible memory cards with this device.
Check the compatibility of a memory card with
its manufacturer or provider. Other memory
cards than microSD and microSDHC cards are not
compatible with this device. Using an incompatible
memory card may damage the memory card as well as
Cyan Magenta Yellow Black
23
the device, and data stored on the incompatible card
may be corrupted.
Traditional text input
Use a memory card
is shown on the top right of the display when
you are writing text using traditional text input.
To format a memory card for your device, select
OptionsFormat memory card. When a memory
card is formatted, all data on the card is lost
permanently. Consult your retailer to find out if you
must format the memory card before you can use it.
To change the name of the memory card, select
OptionsMemory card name.
You can protect a memory card with a password to
prevent unauthorised access. To set a password, select
OptionsSet password. The password can be up to
eight characters long and is case-sensitive. The
password is stored in your device. You do not need to
enter it again while you use the memory card in the
same device. If you use the memory card in another
device, you are asked for the password. Not all memory
cards support password protection.
To remove the memory card password, select
OptionsRemove password. When you remove the
password, the data on the memory card is not
protected against unauthorised use.
To open a locked memory card, select Options
Unlock memory card. Enter the password.
Write text
24
and
indicate the selected case.
indicates that the first letter of the sentence is written
in uppercase and all the other letters are automatically
indicates the number
written in lowercase.
mode.
To write text with the keypad, press a number key
2-9 repeatedly until the desired character appears.
There are more characters available for a number key
than are printed on the key. If the next letter is located
on the same key as the present one, wait until the
cursor appears, and enter the letter.
To insert a number, press and hold the number key.
To switch between the upper and lower case mode and
the number mode, press #.
To erase a character, press the backspace key. Press and
hold the backspace key to erase more than one
character.
To access the most common punctuation marks, press
the 1 key. Press 1 repeatedly to reach the desired
punctuation mark.
To add special characters, press *. Scroll to the desired
character and press the scroll key.
To insert a space, press 0. To move the cursor to the
next line, press 0 three times.
The input methods provided in the device may vary
according to different sales markets.
To switch between the different character cases, press
#.
Cyan Magenta Yellow Black
Predictive text input
1. To activate predictive text input, press # twice
quickly. This activates predictive text input for all
is shown
editors in the device. The indicator
on the display.
2. To write the desired word, press 2-9. Press each key
only once for one letter.
3. When you have finished writing the word and it is
correct, scroll right to confirm it, or press 0 to add
a space.
If the word is not correct, press * repeatedly to view
the matching words the dictionary has found.
If the ? character is shown after the word, the word
you intended to write is not in the dictionary. To
add a word to the dictionary, select Spell, enter the
word (up to 32 letters) using traditional text input,
and select OK. The word is added to the dictionary.
When the dictionary is full, the new word replaces
the oldest added word.
Write the first half of a compound word; to confirm it,
scroll right. Write the last part of the compound word.
To complete the compound word, press 0 to add a
space.
To switch predictive text input off for all editors in the
device, press # twice quickly.
Change the writing
language
When you are writing text, you can change the writing
language. For example, if you press the 6 key
repeatedly to reach a specific character, changing the
writing language gives you access to characters in a
different order.
If you are writing text using a non-Latin alphabet and
want to write Latin characters, for example e-mail or
web addresses, you may need to change the writing
language. To change the writing language, select
OptionsWriting language, and a writing
language that uses Latin characters.
Further information
Instructions in your device
To read instructions for the current view of the open
application, select OptionsHelp.
To browse the help topics and conduct searches, select
MenuHelpHelp. You can select categories for
which you want to see instructions. Select a category,
such as Messaging, to see what instructions (help
topics) are available. While you are reading the topic,
scroll left or right to see the other topics in that
category.
To switch between the application and help, press and
hold the home key.
25
Cyan Magenta Yellow Black
Tutorial
The tutorial provides you information about your
device and shows you how to use it. Select Menu
HelpTutorial.
26
Cyan Magenta Yellow Black
New from Eseries
Your new Eseries device contains new versions of the
Calendar and Contacts applications, as well as a new
home screen.
Access tasks quickly
Whenever you see the
icon on the home screen, or
in the Contacts or Calendar
applications, scroll right to
access a list of available
actions. To close the list,
scroll left.
When you navigate in these
applications, to go back to
the previous level, scroll left.
Navigate in the home screen
To access the home screen, press the home key briefly.
The home screen consists of:
ವ application shortcuts (1)
To access an application
quickly, scroll to its
shortcut and press the
scroll key.
ವ information area (2) To
check an item displayed
in the information area,
scroll to the item and
press the scroll key.
ವ notifications (3) To view
the notifications, scroll to
a box. Each box is only visible if there are items in it.
To hide the boxes, press the backspace key.
Work on the home screen
Home screen
To call the contact, press the call key.
From the home screen you can quickly access features
that you use the most, and see at a glance any missed
calls or new messages.
To set off the contact search, select OptionsContact
search off.
To check your received messages, scroll to the message
box in the notification area. To read a message, scroll
Cyan Magenta Yellow Black
27
to it and press the scroll key. To access other tasks,
scroll right.
To view your missed calls, scroll to the calls box in the
notification area. To return a call, scroll to a call and
press the call key. To send a text message to a caller,
scroll to a call, scroll right and select Send text msg.
from the list of available actions.
To listen to your voice mail, scroll to the voice mail box
in the notification area. Scroll to the desired voice
mailbox and press the call key to call it.
Switch home screens
You can define two home screen modes for different
purposes, such as one mode to show your business email and notifications, and another to show your
personal e-mail. This way, you do not have to see
business-related messages outside office hours.
Your operator may have set you a third home screen
with operator-specific items.
To change from one home screen mode to another,
and press the scroll key.
scroll to
One-touch keys
28
With the One-touch keys you can access applications
and tasks quickly. Each key has been assigned an
application and a task. To change these, select Menu
ToolsSettingsGeneralPersonalisation
One-touch keys. Your network operator may have
assigned applications to the keys, in which case you
cannot change them.
1 — Home key
2 — Contacts key
3 — E-mail key
4 — Calendar key
Home key
To access the home screen, press the home key briefly.
Press the home key briefly again to access the menu.
To view the list of active applications, press the home
key for a few seconds. When the list is open, press the
home key briefly to scroll the list. To open the selected
application, press the home key for a few seconds, or
press the scroll key. To close the selected application,
press the backspace key.
Leaving applications running in the background
increases the demand on battery power and reduces
the battery life.
Contacts key
To open the Contacts application, press the contacts
key briefly.
To create a new contact, press the contacts key for a
few seconds.
Cyan Magenta Yellow Black
Calendar key
To open the Calendar application, press the calendar
key briefly.
To create a new meeting entry, press the calendar key
for a few seconds.
ವ Day view shows the events for the selected day
grouped into time slots according to their starting
time.
ವ To-do view shows all to-do items.
ವ Agenda view shows the events for the selected day
in a list.
To open your default mailbox, press the e-mail key
briefly.
To change the view, select OptionsChange view
and the desired view.
Tip: To open the week view, scroll to a week
number and press the scroll key.
To create a new e-mail message, press the e-mail key
for a few seconds.
To move to the next or the previous day in month,
week, day, and agenda views, scroll right or left.
E-mail key
Nokia Calendar for
Eseries
Select MenuOfficeCalendar.
Create and view scheduled events and appointments,
and switch between different calendar views.
Calendar views
You can switch between the following views:
ವ Month view shows the current month and the
calendar entries of the selected day in a list.
ವ Week view shows the events for the selected week
in seven day boxes.
To change the default view, select Options
SettingsDefault view.
View calendar information
In the month view, calendar
entries are marked with a
triangle. Anniversary entries
are also marked with an
exclamation mark. The
entries of the selected day
are shown in a list.
To open calendar entries,
open a calendar view, scroll
to an entry, and press the
scroll key.
29
Cyan Magenta Yellow Black
Create calendar entries
You can create the following types of calendar entries:
ವ Meeting entries remind you of events that have a
specific date and time.
ವ Memo entries are related to the whole day but not
to a specific time of the day.
ವ Anniversary entries remind you of birthdays and
special dates. They refer to a certain day but not a
specific time of the day. Anniversary entries are
repeated every year.
ವ To-do entries remind you of a task that has a due
date but not a specific time of the day.
To create a calendar entry, scroll to a date, select
OptionsNew entry and the entry type.
Tip: To create a meeting entry, start entering
the subject.
Create meeting, memo, anniversary, or to-do
entries
30
1. Enter the subject.
2. For meeting entries, enter the start and end times,
or select All-day event.
3. For meeting and memo entries, enter the start and
end dates. For anniversary entries, enter the date
and for to-do entries, enter the due date.
4. For meeting entries, enter the location.
5. For meeting, anniversary, and to-do entries, you
can set an alarm.
6. For recurring meeting entries, set the recurrence
time.
7. For to-do entries, set the priority. To set the priority
for meeting entries, select OptionsPriority.
8. For memo, anniversary, and to-do entries, define
how the entry is handled during synchronisation.
Select Private to hide the entry from viewers if the
calendar is available online, Public to make the
entry visible to viewers, or None to not copy the
entry to your computer.
9. Enter a description.
To send the entry, select OptionsSend.
Calendar settings
Select OptionsSettings.
To change the alarm tone, select Calendar alarm
tone.
To change the view displayed when you open the
calendar, select Default view.
To change the first day of the week, select Week starts
on.
To change the week view title, select Week view
title and Week number or Week dates.
Nokia Contacts for
Eseries
Select MenuCommunic.Contacts.
Save and update contact information, such as phone
numbers, home addresses, or e-mail addresses of your
Cyan Magenta Yellow Black
contacts. You can add a personal ringing tone or a
thumbnail image to a contact. You can also create
contact groups, which allow you to communicate with
several contacts at the same time, and send contact
information (business cards) to or receive it from
compatible devices.
icon, scroll right to access a
Whenever you see the
list of available actions. To close the list, scroll left.
Add contacts
Select OptionsNew contact, and enter the
contact's information.
To copy a contact's information from the memory card,
select OptionsCopyFrom memory card.
Contact groups
If you want to make conference calls to the group,
define also the following:
ವ Conf. service number — Enter the conference call
service number.
ವ Conf. service ID — Enter the conference call ID
number.
ವ Conf. service PIN — Enter the conference call PIN
code number.
To make a conference call to the group, select the
group, scroll right, and select Call conf. service from
the list of available actions.
Search for contacts
To search for contacts, start entering the contact's
name in the search field.
Manage contacts directories
You can install contacts directories from the Download!
application.
To change the contacts directory, scroll to the top of
the names list, press the scroll key, and select from the
list of available directories.
To organise contacts directories, select Options
Organise contact lists and a directory. Scroll up to
move it to the desired place.
Add ringing tones for
contacts
You can set a ringing tone for a contact or contact
group. The ringing tone sounds when the contact calls
you.
To add a ringing tone for contacts, open a contact,
select OptionsRinging tone and a ringing tone.
To add a ringing tone for contact groups, select a
contact group, OptionsGroupRinging tone and
a ringing tone.
To remove the assigned ringing tone, select Default
tone from the list of ringing tones.
31
Cyan Magenta Yellow Black
Change contacts settings
Select OptionsSettings.
To change the way the contacts' names are displayed,
select Name display.
To select which contacts directory opens when you
open the Calendar application, select Default contact
list.
Multitasking
You can have several applications open at the same
time. To switch between active applications, press and
hold the home key, scroll to an application, and press
the scroll key. To close the selected application, press
the backspace key.
Example: When you have an active phone call
and want to check your calendar, press the home
key to access the menu, and open the Calendar
application. The phone call remains active in the
background.
Example: When you are writing a message and
want to check a web site, press the home key to
access the menu, and open the Web application.
Select a bookmark or enter the web address
manually, and select Go to. To return to your
message, press and hold the home key, scroll to
the message and press the scroll key.
32
Cyan Magenta Yellow Black
Personalisation
You can personalise your device by adjusting the
various tones, background images, and screen savers,
for example.
or from restarting the GPS or FM radio, so comply with
any applicable safety requirements when establishing
and using these features.
Profiles
To delete a profile that you created, select Options
Delete profile. You cannot delete the predefined
profiles.
Select MenuToolsProfiles.
You can adjust and customise the ringing tones, alert
tones, and other device tones for different events,
environments, or caller groups. The profile currently in
use is shown at the top of the display on the home
screen. However, if the active profile is General, only
today's date is shown.
To create a new profile, select OptionsCreate
new, and define the settings.
To customise a profile, select a profile and Options
Personalise.
To change a profile, select a profile and Options
Activate. The Offline profile prevents your device from
accidentally switching on, sending or receiving
messages, or using wireless LAN, Bluetooth, GPS, or FM
radio; it also closes any internet connection that may
be in operation when the profile is selected. The Offline
profile does not prevent you from establishing a
wireless LAN or Bluetooth connection at a later time,
Select ringing tones
To set a ringing tone for a profile, select Options
PersonaliseRinging tone. Select a ringing tone
from the list, or select Download sounds to open a
bookmark folder containing a list of bookmarks for
downloading tones using the browser. Any
downloaded tones are saved to Gallery.
To play the ringing tone for a selected contact group
only, select OptionsPersonaliseAlert for, and
select the desired group. Phone calls coming from
outside that group have a silent alert.
To change the message tone, select Options
PersonaliseMessage alert tone.
Cyan Magenta Yellow Black
33
Customise profiles
Select OptionsPersonalise, and define the
following:
ವ Ringing tone — Select a ringing tone from the list,
or select Download sounds to open a bookmark
folder containing a list of bookmarks for
downloading tones using the browser. If you have
two alternate phone lines in use, you can specify a
ringing tone for each line.
ವ Video call tone — Select a ringing tone for video
calls.
ವ Say caller's name — When you select this option
and someone from your contacts list calls you, the
device sounds a ringing tone that is a combination
of the spoken name of the contact and the selected
ringing tone.
ವ Ringing type — Select how you want the ringing
tone to alert.
ವ Ringing volume — Select the volume level of the
ringing tone.
ವ Message alert tone — Select a tone for received
text messages.
ವ E-mail alert tone — Select a tone for received email messages.
ವ Vibrating alert — Select whether you want the
device to vibrate when you receive a call.
ವ Breathing light — Select whether you want the
scroll key to start blinking slowly when the display
light turns off.
ವ Keypad tones — Set the volume level of the device
keypad tones.
ವ Warning tones — Set the warning tones on or off.
This setting also affects the tones of some games
and Java applications.
ವ Alert for — You can set the device to ring only upon
calls from phone numbers that belong to a selected
contact group. Phone calls coming from outside that
group have a silent alert.
ವ Profile name — You can give a name to a new
profile or rename an existing profile. The General
and Offline profiles cannot be renamed.
Personalise the home
screen
Select MenuToolsModes.
To change the name of the current home screen, select
Mode name.
To select which applications and notifications you
want to see on the home screen, select Home screen
applications.
To change the theme of the home screen currently in
use, select Theme.
To change the background image of the home screen
currently in use, select Wallpaper.
To change from one home screen to another, select
Switch mode.
34
Cyan Magenta Yellow Black
Change the display
theme
Select MenuToolsThemes.
To change the theme used in all applications, select the
General folder.
To change the theme used in the main menu, select the
Menu view folder.
To change the theme for a particular application, select
the application-specific folder.
To change the background image of the home screen,
select the Wallpaper folder.
To select an image or write a text for the screen saver,
select the Power saver folder.
Download a theme
To enable three-dimensional sound effects for ringing
tones, select 3-D ringing tone effectsOn. Not all
ringing tones support 3–D effects.
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the 3–D effect, select from the following:
ವ Trajectory speed — Select the speed at which
sound moves from one direction to another. This
setting is not available for all effects.
ವ Reverberation — To adjust the amount of echo,
select the desired effect.
ವ Doppler effect — Select On to have the ringing tone
sound higher when you are closer to your device,
and lower when you are farther away. This setting
is not available for all effects.
To listen to the ringing tone with the 3–D effect, select
OptionsPlay tone.
To adjust the volume of the ringing tone, select
MenuToolsProfilesOptions
PersonaliseRinging volume.
To download a theme, select General or Menu view
Download themes. Enter the link from which you
want to download your theme. Once the theme is
downloaded, you can preview, activate, or edit it.
To preview a theme, select OptionsPreview.
To start using the selected theme, select Options
Set.
3-D ringing tones
Select MenuMedia3-D ringing tones.
Cyan Magenta Yellow Black
35
Media
Your device contains a variety of media applications for
both business and leisure time use.
Select the scene.
Camera
Activate the self-timer (images only).
Select MenuMediaCamera.
Select a colour effect.
Activate the sequence mode (images only).
Capture an image
Your device supports an image capture resolution of
up to 2048 x 1536 pixels. The image resolution in this
guide may appear different.
To capture an image, use the display as a viewfinder
and press the scroll key. The device saves the image in
Gallery.
To zoom in or out before capturing an image, scroll up
or down. This function is available only when the
toolbar is not shown.
The toolbar provides you with shortcuts to different
items and settings before and after capturing an image
or recording a video. Scroll to a toolbar item and press
the scroll key.
36
Select the flash mode (images only).
Switch between the video mode and the image
mode.
Show or hide the viewfinder grid (images only).
Adjust the white balance.
Adjust the exposure compensation (images only).
The available options vary depending on the capture
mode and view you are in. The settings return to the
default after you close the camera.
Scenes
A scene helps you to find the right colour and lighting
settings for the current environment. The settings of
each scene have been set according to a certain style
or environment.
To change the scene, select Scene modes in the
toolbar.
To make your own scene, scroll to User defined, and
select OptionsChange.
Cyan Magenta Yellow Black
To copy the settings of another scene, select Based on
scene mode and the desired scene.
To activate your own scene, scroll to User defined,
press the scroll key, and select Select.
Capture images in a
sequence
To capture several images in a sequence, if enough
memory is available, select Sequence mode in the
toolbar and press the scroll key.
The captured images are shown in a grid on the display.
To view an image, scroll to it and press the scroll key.
If you used a time interval, only the last image is shown
on the display, and the other images are available in
Gallery.
To send the image, select OptionsSend.
To send the image to a caller during an active call, select
OptionsSend to caller.
To switch off the sequence mode, select Sequence
modeSingle shot in the toolbar.
View captured image
The image you captured is automatically saved in
Gallery. If you do not want to keep the image, select
Delete from the toolbar.
Select from the following toolbar items:
ವ Send — Send the image to compatible devices.
ವ Send to caller — Send the image to the caller
during an active call.
ವ Post to — Send the image to your compatible
online album (network service).
To use the image as the background image, select
OptionsSet as wallpaper.
To add the image to a contact, select OptionsSet
as contact call img.Assign to contact.
Record videos
1. If the camera is in the image mode, select the video
mode from the toolbar.
2. To start recording, press the scroll key.
3. To pause recording at any time, select Pause. Select
Continue to resume recording.
4. To stop recording, select Stop. The video clip is
automatically saved in Gallery. The maximum
length of the video clip depends on the available
memory.
Play a video clip
To play a recorded video clip, select Play from the
toolbar.
Select from the following toolbar items:
ವ Send — Send the video clip to other compatible
devices.
ವ Send to caller — Send the video clip to the caller
during an active call.
Cyan Magenta Yellow Black
37
ವ Post to — Send the video to an online album
(network service).
ವ Delete — Delete the clip.
To enter a new name for the clip, select Options
Rename video.
Image settings
To change the still image settings, select Options
Settings and from the following:
ವ Image quality — Set the image quality. The better
the image quality, the more memory the image
consumes.
ವ Show captured image — To see the image after
the capture, select On. To continue taking pictures
immediately, select Off.
ವ Default image name — Define the default name
for the captured images.
ವ Extended digital zoom — On (continuous)
allows the zoom increments to be smooth and
continuous between the digital and extended
digital zoom, and Off allows a limited amount of
zoom while retaining the image resolution.
ವ Capture tone — Set the tone that sounds when you
capture an image.
ವ Memory in use — Choose where to store your
images.
ವ Rotate image — Rotate the images.
ವ Restore camera settings — To return the default
values to the camera settings, select Yes.
Video settings
To change the video mode settings, select Options
Settings and from the following:
ವ Video quality — Set the quality of the video clip.
Select Sharing, if you want to send the video clip
using a multimedia message. The clip is recorded
with OCIF resolution, in 3GPP format, and the size is
limited to 300 kB (approximately 20 seconds). You
may not be able to send video clips saved in the
MPEG-4 file format in a multimedia message.
ವ Audio recording — Select Mute if you do not want
to record sound.
ವ Show captured video — View the first frame of
the recorded video clip after the recording stops. To
view the entire video clip , select Play from the
toolbar.
ವ Default video name — Define the default name for
recorded video clips.
ವ Memory in use — Select where you want to store
your video clips.
ವ Restore camera settings — Restore the camera
settings to the default values.
Nokia Podcasting
Select MenuMediaPodcasting.
Download podcasts to your device and listen them.
Play and manage podcasts
38
Podcasting delivers audio or video content over the
internet for playback on mobile devices and PCs.
Cyan Magenta Yellow Black
With the Nokia Podcasting application, you can search,
discover, subscribe, and download podcasts over the
air; and play, manage, and share podcasts with your
device.
Contents of the directories change. Select the desired
directory folder to update it (network service). The
colour of the folder changes, when the update is
complete.
Define the connection and downloading settings
before using the application. Select Options
SettingsConnection and Download.
To subscribe to a podcast, scroll to the podcast title and
select Update. After you have subscribed to episodes
of a podcast, you can download, manage, and play
them in the podcasts menu.
To search for new podcast episodes to subscribe to,
select Directories.
To search for podcasts using keywords and podcast
show titles, select Search.
To display the available episodes from the selected
podcast, open the Podcasts folder and select Open.
To download the selected episode, select Download.
To add a new directory or folder, select Options
NewWeb directory or Folder. Select a title, URL of
the .opml (outline processor markup language) file,
and Done.
To import an .opml file stored on your device, select
OptionsImport OPML file.
To update the selected podcast or marked podcasts, for
a new episode, select OptionsUpdate.
To save a received .opml file, open the file to save the
file into the Received folder in Directories. Open the
folder to subscribe to any of the links to add to your
podcasts.
To open the web site of the podcast (network service),
select OptionsOpen web page.
Search podcasts
To play the downloaded episode, select Play.
Some podcasts provide the opportunity to interact
with the creators by commenting and voting. To
connect to the internet to do this, select Options
View comments.
Directories
Select Directories.
Directories help you find new podcast episodes to
which to subscribe.
Search helps you find podcasts by keyword or title.
The search engine uses the podcast search service you
set up in PodcastingOptionsSettings
ConnectionSearch service URL.
To search for podcasts, select Search, and enter the
desired keywords.
Tip: Search looks for podcast titles and keywords
in descriptions, not specific episodes. General
topics, such as football or hip-hop, usually give
better results than a specific team or artist.
Cyan Magenta Yellow Black
39
To subscribe to selected channels and add them to your
podcasts, select Subscribe.
To start a new search, select OptionsNew search.
To see the details of a podcast, select Options
Description.
Podcasting settings
Play a song or a podcast
episode
To edit the connection settings, select Options
SettingsConnection.
To add all available songs and podcasts to the music
library, select OptionsRefresh.
To edit the download settings, select Options
SettingsDownload.
To play a song or a podcast episode, select Music or
Podcasts and the desired category, then scroll to the
song or podcast episode and press the scroll key.
To restore the default settings, open the corresponding
settings and select OptionsRestore default.
Music player
40
Atom technologies for playback on mobile devices and
PCs.
You can transfer music from other compatible devices
to your device. See "Transfer music from PC", p. 41.
To pause playback, press the scroll key; to resume,
press the scroll key again. To stop playback, scroll
down.
To fast forward or rewind, press and hold the scroll key
to the right or left.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Select MenuMediaMusic player.
Music player supports files formats such as AAC, AAC+,
eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is a method for delivering audio
or video content over the internet using either RSS or
To go to the next item, scroll right. To return to the
beginning of the item, scroll left. To skip to the previous
item, scroll left again within 2 seconds after a song or
podcast has started.
To modify the tone of the music playback, select
OptionsEqualiser.
To modify the balance and stereo image or to enhance
bass, select OptionsAudio settings.
To return to the home screen and leave the player
playing in the background, press the end key.
Cyan Magenta Yellow Black
Playlists
To view and manage playlists, select Music
Playlists.
To create a new playlist, select OptionsCreate
playlist.
To add songs to the playlist, select the song and
OptionsAdd to a playlistSaved playlist or New
playlist.
To reorder songs in a playlist, scroll to the song you
want to move, and select OptionsReorder list.
Nokia Music Store
Select MenuMediaMusic store.
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you need to register
for the service.
To check the Nokia Music Store availability in your
country, visit www.nokia.com/music.
To find more music in the different categories, select
OptionsFind in Music store.
To select the access point to use with the Music Store,
select Default acc. pt..
Transfer music from PC
To transfer music from your PC, connect your device to
the PC with a compatible USB data cable or Bluetooth
connectivity. If you are using the USB cable, select Mass
storage as the connection mode. Make sure that a
compatible memory card is inserted in the device.
You can also use Windows Media Player to synchronise
music between your device and PC.
Transfer with Windows
Media Player
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the
corresponding Windows Media Player guides and help.
The following instructions are for Windows Media
Player 11.
Manual synchronisation
With manual synchronisation, you can select the songs
and playlists that you want to move, copy, or remove.
1. After your device is connected with Windows Media
Player, select your device in the navigation pane on
the right, if more than one device is connected.
2. In the left navigation pane, browse the music files
on your PC which you want to synchronise.
3. Drag and drop songs to the Sync List on the right.
You can see the amount of available memory in
your device above the Sync List.
4. To remove songs or albums, select an item in the
Sync List, right-click, and select Remove from
list.
5. To start the synchronisation, click Start Sync.
Cyan Magenta Yellow Black
41
Automatic synchronisation
1. To activate the automatic synchronisation function
in Windows Media Player, click the Sync tab, select
Nokia Handset > Set Up Sync..., and check the
Sync this device automatically check box.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane, and
click Add.
The selected items are transferred to the Playlists
to sync pane.
3. To finalise the setup for automatic synchronisation,
click Finish.
When the Sync this device automatically check box
is checked and you connect your device to the PC, the
music library in your device is automatically updated
based on the playlists you select for synchronisation in
Windows Media Player. If no playlists have been
selected, the whole PC music library is selected for
synchronisation. If there is not enough free memory in
your device, Windows Media Player selects manual
synchronisation automatically.
To stop automatic synchronisation, click the Sync tab,
and select Stop Sync to 'Nokia Handset'.
Preset frequency settings
Select MenuMediaMusic playerOptions
Go to Now playingOptionsEqualiser.
42
To use a preset frequency setting when playing music,
select the frequency setting you want to use, and select
OptionsActivate.
To modify the frequency of a preset setting, select
OptionsEdit, select a frequency band, and scroll up
or down to increase or decrease its value. You hear your
frequency adjustment immediately in the playback.
To reset the frequency bands to their original values,
select OptionsReset to defaults.
To create your own frequency setting, select Options
New preset. Enter a name for the frequency setting.
Scroll up or down to move between the frequency
bands and set the frequency on each band.
Share online
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuMediaShare online.
You can share images and video clips in compatible
online albums, blogs, or in other compatible online
sharing services on the web. You can upload content,
save unfinished posts as drafts and continue later, and
view the content of the albums. The supported content
types may vary depending on the service provider.
To share files online, you must have an account with
an online image sharing service. You can usually
subscribe to such a service on the web page of your
service provider. Contact your service provider for more
information.
Cyan Magenta Yellow Black
Share images online
Play a recording
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
To listen to the sound clip that you just recorded, select
Play. The progress bar displays the playing time,
position, and length of the clip. Select Stop to cancel
the playback.
To upload a file from Gallery to the online service, select
MenuGallery, select the desired file and Options
SendPost to web.
To pause the playback of a recorded clip, select
Pause. Playback resumes when you select Play.
Recorder settings
Recorder
Select MenuMediaRecorder.
With Recorder, you can record up to 60 minutes of a
voice memo, save the voice recording as a sound clip,
and play the sound clip. Recorder supports the AMR file
format.
You can also press the voice key to open the Recorder
application. If you have logged in to push to talk, the
voice key works as a push-to-talk key and does not
open Recorder.
Record a sound clip
To record a sound clip, select OptionsRecord
sound clip. Select Pause to pause the recording, and
Record to resume recording. When you finish
recording, select Stop. The sound clip is automatically
saved to the Sound clips folder in Gallery.
Recordings are automatically saved to the device
memory unless you change the default location.
Recordings that you create or receive after you change
the settings are affected.
To change the default location of saved recordings,
select OptionsSettingsMemory in use.
To define the recording quality, select Options
SettingsRecording quality. If you select High, the
sound clip you record is in waveform file format (.wav)
and the maximum length for the clip is 60 minutes. If
you select MMS compatible, the sound clip you record
is in adaptive multirate file format (.amr), and the
maximum length for the clip is one minute.
Gallery
Select MenuMediaGallery.
Use Gallery to access and use different types of media,
including images, videos, music, and sounds. All
viewed images and videos, and all received music and
sounds are automatically saved to Gallery. Sound clips
Cyan Magenta Yellow Black
43
are opened in the Music player, and video clips and
streaming links in the RealPlayer application. Images
are opened in the image viewer.
Work with media files and
folders
To open a file or a folder, scroll to it, and press the scroll
key.
To create a new folder, select a file and then select
OptionsOrganiseNew folder. You cannot
create folders within folders.
To copy or move files, select a file and Options
OrganiseMove to folder, New folder, Move to
memory card, Copy to memory card, Copy to phone
mem., or Move to phone mem..
To download files into Gallery using the browser, select
Downl. graphics, Downld. videos, Downld. tracks,
or Downld. sounds. The browser opens, and you can
choose a bookmark or enter the address for the
download site.
To search for a file, select OptionsFind. Write the
item you are searching for. Files that match the search
are shown.
To view the image in full screen size, select Options
Full screen. To return to normal view, select Options
Normal screen.
To rotate the image, select OptionsRotate. Select
Right to rotate the image clockwise by 90 degrees, or
select Left to rotate the image counterclockwise by 90
degrees.
Manage image files
To view detailed information about the image, select
OptionsView details.
To send the image, select OptionsSend, and the
method for sending.
To rename the image, select OptionsRename.
To set the image as the display background, select
OptionsUse imageSet as wallpaper.
To add the image to a contact, select OptionsUse
imageAssign to contact. The Contacts application
opens, and you can select the contact for the image.
RealPlayer
View images
To open an image for viewing, select Options
Open.
44
To enlarge the image on the display, select Options
Zoom in. To reduce the image on the display, select
Zoom out.
To open the next or previous image for viewing, scroll
right or left.
Select MenuMediaRealPlayer.
RealPlayer plays video clips and audio files that are
stored in the device memory or on a memory card,
transferred to your device from an e-mail message or
Cyan Magenta Yellow Black
a compatible computer, or streamed to your device
over the web. Supported formats include MPEG-4, MP4
(not streaming), 3GP, RV, RA, AMR, and Midi. RealPlayer
does not necessarily support all variations of a media
file format.
Play video clips and stream
links
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To play a video clip or audio file, select Options
OpenMost recent clips to play one of the six clips
you most recently played, or Saved clip to play a clip
or open a web link. Select Play.
To play streaming media, select a web link that points
to a clip, and select Play; or connect to the web, browse
to a video clip or audio file, and select Play. RealPlayer
recognises two kinds of links: an rtsp:// URL and an
http:// URL that points to a RAM file. Before the content
begins streaming, your device must connect to a web
site and buffer the content. If a network connection
problem causes a playback error, RealPlayer attempts
automatically to reconnect to the internet access point.
To adjust the volume during playback, use the volume
keys.
To fast-forward during playback, scroll up and hold. To
rewind during play, scroll down and hold.
To stop the playback or streaming, select Stop.
Buffering or connecting to the streaming site stops, the
playback of the clip stops, and the clip rewinds to the
beginning.
To download video clips from the web, select
OptionsDownload videos.
To view the video clip in full-screen size, select
OptionsPlay in full screen. Full screen increases
the size of the video to cover the maximum video area
possible while the aspect ratio is maintained.
Tip: To switch between the normal screen and
full screen quickly, press 2 on the keypad.
Send audio files and video
clips
To transfer a media clip to a compatible device, select
OptionsSend. Select the sending method.
To send a media clip inside a message, create a
multimedia message, select a clip to attach and Insert
objectVideo clip or Sound clip.
View information about a
media clip
To view the properties of a video clip, audio file, or web
link, select OptionsClip details. Information may
include for example the bit rate or the internet link of
a streaming file.
To set on file protection for a media clip, select
OptionsClip detailsStatusOptions
Cyan Magenta Yellow Black
45
Change. File protection prevents others from changing
a file.
uneven and slow due to their original settings. Change
the quality setting of such files to Normal or Low for
improved playback.
RealPlayer settings
To organise your flash files, select Options
Organise.
You may receive RealPlayer settings in a message from
your service provider.
To define the settings manually, select Options
SettingsVideo or Streaming.
Select MenuMediaFlash Player.
With Flash player, you can view, play, and interact with
flash files made for mobile devices.
Select MenuMediaRadio.
The quality of the radio broadcast depends on the
coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. Attach a compatible headset
or enhancement to the device for the FM radio to
function properly.
Manage flash files
Listen to the radio
Flash player
To optimise the use of Flash Player, insert a memory
card in your device.
To play a flash file, scroll to it, and press the scroll key.
To send a flash file to compatible devices, select
OptionsSend. Copyright protection may prevent
the sending of some flash files.
To switch between flash files saved on your device
memory or memory card, scroll to the corresponding
tabs.
46
Radio
To change the flash file quality, select Options
Quality when you are playing the flash file. If you select
High, the playback of some flash files may appear
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
or
. To set the
To search for a station, select
frequency manually, select OptionsManual
tuning.
To view available stations based on location, select
OptionsStation directory (network service).
To save the current station to your station list, select
OptionsSave station.
Cyan Magenta Yellow Black
To select a previously saved radio station, select
or
Saved stations
To adjust the volume, use the volume keys.
To open the list of your saved stations, select
OptionsStations.
To switch from headset use to listening to the radio
through the loudspeaker, select OptionsActivate
loudspeaker.
To listen to a saved station, select Options
StationListen.
To return to the home screen and leave the FM radio
playing in the background, select OptionsPlay in
background.
To view available visual content for a station with the
Visual Radio service, select OptionsStationStart
visual service.
To change the station details, select Options
StationEdit.
View visual content
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
To check availability and costs, and to subscribe to the
service, contact your service provider.
Before you can view visual content, you must have an
internet access point defined at MenuTools
SettingsConnectionAccess points.
1. To view available visual content for a tuned station,
select OptionsStart visual service. If the visual
radio service ID has not been saved for the station,
enter it, or select Retrieve to search for it in the
station directory (network service).
2. Select the location nearest to you from the station
directory. If your device finds a station that matches
the tuned frequency, its visual service ID is
displayed. To view the visual content, select OK.
Radio settings
Select OptionsSettings and from the following:
ವ Start-up tone — Select whether a tone is played
when the application is started.
ವ Auto-start service — Select Yes to have the Visual
Radio service start automatically when you select a
saved station that offers the Visual Radio service.
ವ Access point — Select the access point used for the
data connection. You do not need an access point to
use the application as an ordinary FM radio.
ವ Current region — Select the region you are
currently located in. This setting is displayed only if
there was no network coverage when the
application was started.
Cyan Magenta Yellow Black
47
Internet
With your new Eseries device you can browse both the
internet and your company's intranet, and download
and install new applications to your device. You can
also use your device as a modem and connect your PC
to the internet.
Web
Select MenuWeb.
To browse the web (network service), you need to
configure the internet access point settings. If you are
using a GPRS connection, your wireless network must
support GPRS, and the service must be activated for
your SIM card.
Tip: You may receive the internet access point
settings from your service provider as a special
text message or from the service provider's web
pages. You can also enter the internet access
point settings manually. See "Internet access
points", p. 51.
Check the availability of services, pricing, and fees with
your service provider. Service providers also give you
instructions on how to use their services.
48
Connection security
If the security indicator ( ) is displayed during a
connection, the data transmission between the device
and the internet gateway or server is encrypted. The
security icon does not indicate that the data
transmission between the gateway and the content
server (or place where the requested resource is
stored) is secure. The service provider secures the data
transmission between the gateway and the content
server.
Security certificates may be required for some services,
such as banking services. You are notified if the identity
of the server is not authentic or if you do not have the
correct security certificate in your device. For more
information, contact your service provider.
Browse the web
To browse the web, select a bookmark or enter the web
address manually, and select Go to. Use only services
that you trust and that offer adequate security and
protection against harmful software.
Tip: When you start to enter the address, the
addresses of the pages you have previously
visited that match your input are displayed. To
Cyan Magenta Yellow Black
open a page, scroll to its address, and press the
scroll key.
To move on a web page, use the scroll key, which is
shown as a pointer on the page. When you move the
pointer over a link, the pointer changes into a hand.
Press the scroll key to open the link. On a web page,
new links usually appear underlined in blue and
previously visited links in purple. Images that act as
links have a blue border around them.
The addresses of the pages you visit are saved in the
Auto. bookmarks folder.
information or services you have accessed are stored
in the cache.
To empty the cache, select OptionsClear privacy
dataClear cache.
Feeds and blogs
Select MenuWebWeb feeds.
Feeds usually contain headlines and articles, often
about recent news or other topics. Blog is a shortening
of weblog, which is a continuously updated web diary.
Bookmarks
To download a feed or blog, scroll to it, and press the
scroll key.
To view a bookmarked web page, scroll to the
bookmark, and press the scroll key.
To add or edit a feed or blog, select OptionsManage
feedNew feed or Edit.
To browse to another web page, select Options
Navigation optionsGo to web address, enter the
page address, and select Go to.
End a connection
To add a bookmark, select OptionsBookmark
managerAdd bookmark.
To organise your bookmarks, select Options
Bookmark manager in the Web main view. You can
move and edit bookmarks, and create new folders.
Clear the cache
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have
accessed confidential information requiring
passwords, empty the cache after each use. The
To end the connection and view the browser page
offline, select OptionsToolsDisconnect. To end
the connection and close the browser, select
OptionsExit.
Web settings
Select MenuWebOptionsSettings.
The Web settings are divided into four groups:
ವ General contains access point and home page
related settings.
ವ Page contains imaging, audio, and pop-up settings.
ವ Privacy contains settings related your privacy.
Cyan Magenta Yellow Black
49
ವ Web feeds contains settings related to web feeds
and blogs.
To browse your company's intranet, you must create a
company-specific VPN policy. Select MenuTools
SettingsConnectionVPN.
The items are categorised under catalogs and folders
provided by Nokia or independent service providers.
Some items may be chargeable, but you can usually
preview them free of charge.
Download! uses your network services to access the
most updated content. For information on additional
items available through Download!, contact your
service provider, or the supplier or manufacturer of the
item.
Only install and use applications and other software
from sources that offer adequate security and
protection against harmful software.
To connect to the intranet, open the Intranet
application, select the connection method and
OptionsConnect.
Manage items
Browse the intranet
Select MenuOfficeIntranet.
To define which VPN profile to use in the connection,
select OptionsUse other VPN policy.
To define the settings for the intranet connection,
select OptionsSettings.
To buy the selected item, select OptionsBuy.
To download an item that is free of charge, select
OptionsGet.
To search for an item, select OptionsSearch.
Download!
50
To open an item or view the content of a folder or
catalogue, scroll to it, and press the scroll key.
To adjust the settings, select OptionsSettings.
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuDownload!.
With Download! (network service), you can browse,
download, and install items, such as latest applications
and related documents, to your device from the web.
To view the list of downloaded items, select Options
My items.
Subscriptions
To view file details of the selected item, select
OptionsOpen.
To renew or cancel a subscription, select Options and
the corresponding option.
Cyan Magenta Yellow Black
Download! search
Scroll to the catalogues from which you want to search
for items, select Mark to select them, and enter the
search keywords.
To start the search, select OptionsSearch.
Purchase history
To open the selected item with the corresponding
application, select OptionsOpen.
To view file details of the selected item, select
OptionsView details.
To start, pause, resume, or cancel the download of the
selected item, select Options and the corresponding
option.
Download! settings
To change the Download! settings, select Options
Settings and from the following:
ವ Access point — Select an access point to use to
connect to the service provider's server.
ವ Automatic open — Select whether you want the
downloaded item or application to open
automatically after the download is completed.
ವ Preview confirmation — Select whether you want
a confirmation query to be shown before
previewing an item.
ವ Buy confirmation — Select whether you want a
confirmation query to be shown before buying an
item.
ವ Subscrip. confirmation — Define whether you
want the subscription confirmation query to be
shown before subscribing to an item.
Internet access points
An internet access point is a collection of settings,
which define how the device creates a data connection
to the network. To use e-mail and multimedia services
or to browse web pages, you must first define access
points for these services.
Some or all access points may be preset for your device
by your service provider, and you may not be able to
create, edit, or remove them.
Set up an internet access
point for packet data (GPRS)
1. Select MenuToolsSettings
ConnectionAccess points.
2. Select OptionsNew access point to create a
new access point, or select an existing access point
from the list and then OptionsDuplicate access
point to use the access point as a basis for the new
one.
3. Define the following settings.
ವ Connection name — Enter a descriptive name
for the connection.
ವ Data bearer — Select Packet data.
Cyan Magenta Yellow Black
51
ವ Access point name — Enter the name for the
access point. The name is usually provided by
your service provider.
ವ User name — Enter your user name if required
by the service provider. User names are often
case-sensitive and provided by your service
provider.
ವ Prompt password — Select Yes to enter your
password each time you log into a server or No
to save the password in your device memory and
automate the login.
ವ Password — Enter your password if required by
the service provider. The password is often casesensitive and provided by the service provider.
ವ Authentication — Select Secure to send your
password always encrypted, or Normal to send
your password encrypted when possible.
ವ Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point.
4. After defining the settings, select Options
Advanced settings to define the advanced
settings or Back to save the settings and exit.
Advanced internet access
point settings for packet
data (GPRS)
Select MenuToolsSettingsConnection
Access points.
52
After setting up a basic internet access point for packet
data (GPRS), select OptionsAdvanced settings,
and define the following advanced settings:
ವ Network type — Select IPv4 or IPv6 as the internet
protocol type. The internet protocol defines how
data is transferred to and from your device.
ವ Phone IP address — Enter the IP address of your
device. Select Automatic to have the network
provide the device IP address. This setting is shown
only if you select Network typeIPv4.
ವ DNS address — Select Primary DNS address and
Secondary DNS address and enter their IP
addresses, if required by your service provider.
Otherwise, the name server addresses are provided
automatically.
ವ Proxy server address — Enter the address of the
proxy server. Proxy servers are intermediate servers
used by some service providers between a browsing
service and its users. These servers may provide
additional security and speed up access to the
service.
Set up an access point for
WLAN manually
1. Select MenuToolsSettings
ConnectionAccess points.
2. Select OptionsNew access point to create a
new access point, or select an existing access point
from the list and then OptionsDuplicate access
point to use the access point as a basis for the new
one.
3. Define the following settings.
Cyan Magenta Yellow Black
ವ Connection name — Enter a descriptive name
for the connection.
ವ Data bearer — Select Wireless LAN.
ವ WLAN network name — To enter the service
set identifier (SSID), that is, the name that
identifies the specific WLAN, select Enter
manually. To select the network from the
WLANs in range, select Search for networks.
ವ Network status — Select Hidden if the network
you are connecting to is hidden or Public if it is
not hidden.
ವ WLAN network mode — If you select
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
devices can send and receive data directly with
each other, and no WLAN access point is needed.
ವ WLAN security mode — You must select the
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
additional settings. See the device help for more
information.
ವ WLAN security settings — Edit the security
settings for the selected security mode.
ವ Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point.
To set up a WLAN access point automatically, use the
WLAN wizard. Select MenuConnectivityWLAN
wiz..
Advanced access point
settings for WLAN
Select MenuToolsSettingsConnection
Access points.
After setting up a basic access point for WLAN, select
OptionsAdvanced settings, and define the
following advanced settings:
ವ IPv4 settings — Enter the device IP and name
server addresses for the IPv4 internet protocol.
ವ IPv6 settings — Select or enter the name server
addresses for the IPv6 internet protocol.
ವ Ad-hoc channel — The channel is usually chosen
automatically. To enter the channel number (1-11)
manually, select User defined.
ವ Proxy server address — Enter the proxy server
address.
ವ Proxy port number — Enter the proxy server port
number.
Connect PC to web
You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of
your device and your PC.
2. Select Connect PC to Net. The necessary Windows
software is installed to your PC.
3. Accept the installation in your PC. If asked, accept
also the connection. When the connection between
your device and PC is established, the internet
browser of your PC opens.
Cyan Magenta Yellow Black
53
You must have administrator rights to your PC, and the
autorun option enabled in the PC. If not, run the
setup.exe file from the CD-ROM drive of your PC.
54
Cyan Magenta Yellow Black
Messaging
Select MenuCommunic.Messaging.
In Messaging (network service), you can send and
receive text messages, multimedia messages, audio
messages, and e-mail messages. You can also receive
web service messages, cell broadcast messages, and
special messages containing data, and send service
commands.
Before sending or receiving messages, you may need
to do the following:
ವ Insert a valid SIM card in the device and be located
in the service area of a cellular network.
ವ Verify that the network supports the messaging
features you want to use and that they are activated
on your SIM card.
ವ Define the internet access point settings on the
device. See "Internet access points", p. 51.
ವ Define the e-mail account settings on the device. See
"E-mail account settings", p. 69.
ವ Define the text message settings on the device. See
"Text message settings", p. 68.
ವ Define the multimedia message settings on the
device. See "Multimedia message
settings", p. 68.
The device may recognise the SIM card provider and
automatically configure some of the message settings.
If not, you may need to define the settings manually;
or contact your service provider to configure the
settings.
Messaging folders
Messages and data received using Bluetooth
connectivity or infrared are stored in the Inbox folder.
E-mail messages are stored in Mailbox. Messages that
you have been writing can be stored in the Drafts
folder. Messages that are waiting to be sent are stored
in the Outbox folder, and messages that have been
sent, excluding Bluetooth and infrared messages, are
stored in the Sent folder.
Tip: Messages are placed in Outbox, for example,
when your device is outside network coverage.
You can also schedule e-mail messages to be
sent the next time you connect to your remote
mailbox.
Note: The message sent icon or text on your device
screen does not indicate that the message is received
at the intended destination.
To request the network to send you a delivery report
of the text messages and multimedia messages you
have sent (network service), select Options
Cyan Magenta Yellow Black
55
SettingsText message or Multimedia
messageReceive report. The reports are saved in
the Reports folder.
Organise messages
To create a new folder to organise your messages,
select My foldersOptionsNew folder.
To rename a folder, select OptionsRename
folder. You can only rename folders that you have
created.
To move a message to another folder, select Options
Move to folder, the folder, and OK.
To sort messages in a specific order, select Options
Sort by. You can sort the messages by Date, Sender,
Subject, or Message type.
To pause the reading, press the left selection key
briefly. To continue, press the left selection key briefly
again.
To end the reading, press the end key.
Speech
Select MenuToolsSpeech.
With Speech, you can set the language, voice, and voice
properties for the message reader.
Edit the voice properties
To view the properties of a message, select the
message and OptionsMessage details.
To set the language for the message reader, select
Language. To download additional languages to your
device, visit the Nokia web site or use the Download!
application.
Message reader
To set the speaking voice, select Voice. The voice is
language-dependent.
The application is available in your device in English.
To download additional languages, visit
www.nokia.com (in English).
The message reader reads received text and
multimedia messages aloud.
To set the speaking rate, select Voice settings
Speed.
To play a message, press and hold the left selection key
when you receive a message.
56
the beginning of the message, scroll up to hear the
previous message.
To set the speaking volume, select Voice settings
Volume.
To listen to a voice, open the voice tab, select the voice,
and select OptionsPlay voice.
To start reading the next message in Inbox, scroll
down. To start reading the message again, scroll up. In
Cyan Magenta Yellow Black
E-mail messages
Select MenuMessagingMailbox.
To receive and send e-mail, you must have a remote
mailbox service. This service may be offered by an
internet service provider, a network service provider,
or your company. Your device is compliant with
internet standards SMTP, IMAP4 (revision 1), and POP3,
and with different vendor-specific e-mail solutions.
Other e-mail providers may offer services with different
settings or features than those described in this user
guide. Contact your e-mail provider or service provider
for more details.
Before you can send, receive, retrieve, reply to, and
forward e-mail on your device, you must also do the
following:
ವ Configure an internet access point. See "Internet
access points", p. 51.
ವ Set up an e-mail account, and define the e-mail
settings correctly. To do this, use the mailbox guide,
or define the account manually. See "E-mail account
settings", p. 69.
Contact your service provider for the correct settings.
Set up your e-mail
With the e-mail wizard, you can set up your business
e-mail account, such as Microsoft Outlook, or Microsoft
Exchange; and internet e-mail account, such as Google
e-mail services.
1. To start the e-mail wizard, go to the home screen,
scroll to the e-mail wizard, and press the scroll key.
2. Enter your e-mail address and password. If the
wizard is not able to configure your e-mail settings
automatically, select your e-mail account type and
enter the related settings.
If your device contains any additional e-mail clients,
those are offered to you when you start the e-mail
wizard.
When setting up your e-mail, you may be prompted for
the following information:
ವ User name
ವ E-mail type
ವ Incoming mail server
ವ Incoming mail server port
ವ Outgoing mail server
ವ Outgoing mail server port
ವ Password
ವ Access point
If you are setting up your business e-mail, ask your
company IT department for details. If you are setting
up your internet e-mail, see your e-mail service
provider’s website for details.
Connect to a remote mailbox
E-mail addressed to you is not automatically received
by your device, but by your remote mailbox. To read
your e-mail, you must first connect to the remote
mailbox; then select the e-mail messages you wish to
retrieve into your device.
Cyan Magenta Yellow Black
57
1. To retrieve received e-mail messages to your device
and view them, select your mailbox in the
Messaging main view. When the device asks
Connect to mailbox?, select Yes.
2. Enter your user name and password, if prompted.
3. Select OptionsRetrieve e-mailNew to
retrieve new messages that you have neither read
nor retrieved, Selected to retrieve only messages
you select from the remote mailbox, or All to
retrieve all messages not previously retrieved.
4. To manage your e-mail offline to save in connection
costs and work in conditions that do not allow a
data connection, select OptionsDisconnect to
disconnect from the remote mailbox. Any changes
you make in the remote mailbox folders while
offline, take effect in your remote mailbox the next
time you go online and synchronise.
To set the sending time for the e-mail message, select
OptionsSending optionsSend message.
Select Immediately, or select When conn. avail. if
you are working offline.
Read and reply to e-mail
To call the sender of the e-mail message, if the sender
can be found in Contacts, select OptionsCall.
Important: Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
To forward an e-mail, select OptionsForward.
To attach a file to an e-mail message, select Options
Insert and the attachment you want to add.
To delete an attachment from an e-mail that you are
sending, select the attachment and Options
Remove.
To set the message priority, select OptionsSending
optionsPriority.
To reply to the sender of the e-mail with an audio
message or multimedia message, select Options
Create message.
To read a received e-mail, open it from the mailbox.
Write and send e-mail
To open an attachment, select Options
Attachments. Scroll to the attachment, and press the
scroll key.
1. To write an e-mail, select New messageEmail.
2. Select OptionsAdd recipient to select the
recipients' e-mail addresses from Contacts, or enter
the e-mail addresses in the To field. Use a semicolon
to separate entries. Use the Cc field to send a copy
To reply only to the sender of an e-mail, select
OptionsReplyTo sender.
58
Tip: If you reply to an e-mail that contains
attached files, the attachments are not included
in the reply. If you forward the received e-mail,
the attachments are included.
To reply to all recipients of an e-mail, select Options
ReplyTo all.
Cyan Magenta Yellow Black
to other recipients, or the Bcc field to send a blind
copy to recipients.
3. In the Subject field, enter the subject of the e-mail.
4. Enter your e-mail message in the text area, and
select OptionsSend.
Delete messages
To free up memory space on your device, regularly
delete messages from the Inbox and Sent folders, and
delete retrieved e-mail messages.
To delete e-mail from the device only, and keep the
original on the server, select OptionsDelete
Phone (header remains).
To delete e-mail both from the device and the remote
server, select OptionsDeletePhone and
server.
To cancel the deleting, select OptionsRestore.
Subfolders in your remote email
If you create subfolders in your IMAP4 mailboxes on a
remote server, you can view and manage these folders
with your device when you subscribe to them. You can
only subscribe to folders in your IMAP4 mailboxes.
To view folders in your IMAP4 mailbox, establish a
connection, and select OptionsE-mail settings
Retrieval settingsFolder subscriptions.
To view a remote folder, select a folder and Options
Subscribe. Every time you go online, the subscribed
folders are updated. This may take some time if the
folders are large.
To update the list of folders, select a folder and
OptionsUpdate folder list.
Text messages
Select MenuCommunic.Messaging.
Write and send text
messages
Your device supports text messages beyond the limit
for a single message. Longer messages are sent as two
or more messages. Your service provider may charge
accordingly. Characters with accents or other marks,
and characters from some language options, take up
more space, and limit the number of characters that
can be sent in a single message.
1. To write a text message, select New message
Text message.
2. In the To field, enter a recipient's number, or press
the scroll key to add a recipient from Contacts. If you
enter more than one number, separate the
numbers with a semicolon.
3. Enter the text of the message. To use a template,
select OptionsInsertTemplate.
4. Select OptionsSend.
Cyan Magenta Yellow Black
59
Sending options for text
messages
To select a message centre to send the message, select
OptionsSending optionsMessage centre in
use.
To have the network send you delivery reports on your
messages (network service), select Options
Sending optionsReceive reportYes.
To view SIM card messages, open the folder where you
copied the messages, and open a message.
To define how long the message centre resends your
message (network service) if the first attempt fails,
select OptionsSending optionsMessage
validity. If the recipient cannot be reached within the
validity period, the message is deleted from the
message centre.
View picture messages
To convert the message to another format, select
OptionsSending optionsMessage sent as
Text, Fax, Paging, or E-mail. Change this option only
if you are sure that your message centre is able to
convert text messages into these other formats.
Contact your service provider.
Text messages on the SIM
card
60
messages to a folder, you can view them in the folder
or delete them from the SIM card.
1. Select OptionsMark/UnmarkMark or Mark
all to mark every message.
2. Select OptionsCopy.
3. Select a folder and OK to begin copying.
Select MenuCommunic.Messaging
OptionsSIM messages.
Text messages may be stored on your SIM card. Before
you can view SIM messages, you must copy the
messages to a folder in the device. After copying the
The appearance of a picture message may vary
depending on the receiving device.
To view a picture message, open the message from the
Inbox folder.
To view information about the picture message, select
OptionsMessage details.
To save a message in a different folder, select
OptionsMove to folder.
To add the sender of the message to Contacts, select
OptionsSave to Contacts.
Forward picture messages
1. To forward the message, open the message from
the Inbox folder and select OptionsForward.
2. In the To field, enter a recipient's number, or press
the scroll key to add a recipient from Contacts. If you
enter more than one number, separate the
numbers with a semicolon.
Cyan Magenta Yellow Black
3. Enter the text of your message. To use a template,
select OptionsInsertTemplate.
4. Select OptionsSend.
Tip: To remove the picture from the message,
select OptionsRemove picture.
Multimedia messages
Select MenuCommunic.Messaging.
Only devices that have compatible features can receive
and display multimedia messages. The appearance of
a message may vary depending on the receiving device.
A multimedia message (MMS) can contain text and
objects such as images, sound clips, or video clips.
Before you can send or receive multimedia messages
on your device, you must define the multimedia
message settings. Your device may have recognised
the SIM card provider and automatically configured the
multimedia message settings. If not, use Settings
wizard, or contact your service provider for the correct
settings. See "Multimedia message settings", p. 68.
Create and send multimedia
messages
2. In the To field, enter a recipient's number or e-mail
address, or press the scroll key to add a recipient
from Contacts. If you enter more than one number
or e-mail address, separate them with a semicolon.
3. In the Subject field, enter a subject for the
message. To change the fields that are visible,
select OptionsAddress fields.
4. Enter the text of the message, and select Options
Insert object to add media objects. You can add
objects such as Image, Sound clip, or Video clip.
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit
the device may make it smaller so that it can be sent
by MMS.
5. Each slide of your message can contain only one
video or sound clip. To add more slides to your
message, select OptionsInsert newSlide.
To change the order of slides in your message,
select OptionsMove.
6. To preview a multimedia message before sending
it, select OptionsPreview.
7. Select OptionsSend.
To delete an object from a multimedia message, select
OptionsRemove.
To set the sending options for the current multimedia
message, select OptionsSending options.
Important: Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
1. To create a new message, select New message
Multimedia message.
Cyan Magenta Yellow Black
61
Receive and reply to
multimedia messages
Important: Exercise caution when opening
messages. Messages may contain malicious software
or otherwise be harmful to your device or PC.
Tip: If you receive multimedia messages that
contain objects unsupported by your device, you
cannot open them. Try to send these objects to
another device such as a computer, and open
them there.
1. To reply to a multimedia message, open the
message, and select OptionsReply.
2. Select Options and To sender to reply to the sender
with a multimedia message, Via text message to
reply with a text message, Via audio message to
reply with an audio message, or Via e-mail to reply
with an e-mail message.
3. Enter the text of the message, and select Options
Send.
Create presentations
62
Creating multimedia presentations is not possible if
the MMS creation mode setting is set to Restricted.
To change the setting, select MessagingOptions
SettingsMultimedia messageMMS creation
modeFree.
1. To create a presentation, select New message
Multimedia message.
2. In the To field, enter a recipient's number or e-mail
address, or press the scroll key to add a recipient
from Contacts. If you enter more than one number
or e-mail address, separate them with a semicolon.
3. Select OptionsCreate presentation and a
presentation template. A template may define
which media objects you can include in the
presentation, where they appear, and which effects
are displayed between images and slides.
4. Scroll to the text area and enter the text.
5. To insert images, sound, video, or notes in your
presentation, scroll to the corresponding object
area, and select OptionsInsert.
6. To add slides, select InsertNew slide.
To select the background colour for the presentation
and background images for different slides, select
OptionsBackground settings.
To set effects between images or slides, select
OptionsEffect settings.
To preview the presentation, select Options
Preview. Multimedia presentations may only be
viewed in compatible devices that support
presentations. They may appear different in different
devices.
View presentations
To view a presentation, open the multimedia message
from the Inbox folder. Scroll to the presentation, and
press the scroll key.
To pause the presentation, press either selection key.
Cyan Magenta Yellow Black
To resume playing the presentation, select Options
Continue.
If the text or images are too large to fit on the display,
select OptionsActivate scrolling, and scroll to see
the entire presentation.
To find phone numbers and e-mail or web addresses in
the presentation, select OptionsFind. You may use
these numbers and addresses to make calls, send
messages, or create bookmarks, for example.
View and save multimedia
attachments
To view multimedia messages as complete
presentations, open the message, and select
OptionsPlay presentation.
Tip: To view or play a multimedia object in a
multimedia message, select View image, Play
sound clip, or Play video clip.
select OptionsForward. If the server does not
support multimedia message forwarding, this option
is not available.
1. In the To field, enter a recipient's number or e-mail
address, or press the scroll key to add a recipient
from Contacts. If you enter more than one number
or e-mail address, separate them with a semicolon.
2. Edit the message, if desired, and select Options
Send.
Tip: To edit the delivery settings of the message,
select OptionsSending options.
Send a sound clip
To save a multimedia object, select Options
Objects, the object, and OptionsSave.
1. To compose an audio message, select New
messageAudio message.
2. In the To field, enter a recipient's number or e-mail
address, or press the scroll key to add a recipient
from Contacts. If you enter more than one number
or e-mail address, separate them with a semicolon.
3. Select OptionsInsert sound clip, and select
whether to record a sound clip or select one from
Gallery.
4. Select OptionsSend.
Forward a multimedia
message
Sending options for
multimedia messages
Open Inbox, scroll to a multimedia notification, and
press the scroll key. To send the message to a
compatible device without retrieving it to your device,
Select New messageMultimedia message
OptionsSending options and from the following
options:
To view the name and size of an attachment, open the
message, and select OptionsObjects.
Cyan Magenta Yellow Black
63
ವ Receive report — Select Yes if you want to receive
a notification when the message has been
successfully delivered to the recipient. Receiving a
delivery report of a multimedia message that has
been sent to an e-mail address may not be possible.
ವ Message validity — Select how long the
messaging centre tries to send the message. If the
recipient of a message cannot be reached within the
validity period, the message is removed from the
multimedia messaging centre. The network must
support this feature. Maximum time is the
maximum amount of time allowed by the network.
ವ Priority — Set the sending priority to High,
Normal, or Low.
Instant messaging
64
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuCommunic.IM.
Instant messaging (IM) (network service) allows you to
converse with other people using instant messages
and join discussion forums (IM groups) with specific
topics. Various service providers maintain IM servers
that you can log in to after you register to an IM service.
Service providers may differ in their support of
features.
If IM is not available from your service provider, it may
not appear in the menu of your device. Contact your
service provider for more information about signing up
for IM services and costs of services. For more
information on IM settings, contact your service
provider.
You may receive the settings in a special text message
from the service provider that offers the IM service. If
not, enter the settings manually.
Define IM settings
To define the IM application settings, select Options
SettingsIM settings. You can, for example, set your
screen name and IM alert tones.
To converse with an IM user or users, and to view and
edit your IM contacts, you must log into an instant
messaging server. To add an IM server, select
OptionsSettingsServers. Ask your service
provider for the correct settings. To set the server as
the one to which your device automatically logs in,
select OptionsSettingsDefault server.
To define how your device connects to the IM server,
select OptionsSettingsIM login type. To
establish a connection between your device and the
default server automatically, select Automatic. To
automate the connection only when in your home
network, select Auto in home netw. To connect to the
server when you open the IM application, select On
app. start-up. To connect to the server manually,
select Manual and log into the server in the IM main
view by selecting OptionsLog in. Enter your user
ID and password at the prompt. You can obtain the user
name, password, and other settings to log in from your
service provider when you register for the service.
Cyan Magenta Yellow Black
Start a conversation
IM groups
Open Conversations.
Open IM groups. IM groups is available only if you are
logged into an IM server, and the server supports IM
groups.
To search for IM users and user IDs, select IM
contactsOptionsNew IM contactSearch.
You can search by User's name, User ID, Phone
number, and E-mail address.
To view a conversation, select a participant.
To continue the conversation, enter your message, and
select OptionsSend.
To return to the conversations list without closing the
conversation, select Back. To close the conversation,
select OptionsEnd conversation.
To start a new conversation, select OptionsNew
conversation. You can start a new conversation with
a contact while you are inside an active conversation.
However, you cannot have two active conversations
with the same contact.
To create an IM group, select OptionsCreate new
group.
To join an IM group or to continue a group
conversation, scroll to the group, and press the scroll
key. Enter a message, and select OptionsSend.
To join an IM group that is not on the list, but for which
you know the group ID, select OptionsJoin new
group.
To leave the IM group, select OptionsLeave IM
group.
To search for IM groups and group IDs, select IM
groupsOptionsSearch. You can search by
Group name, Topic, and Members (user ID).
To insert an image to an instant message, select
OptionsSend image, and select the image you
want to send.
To add an IM user to the group, select OptionsAdd
member. Select a user from your IM contacts or enter
the contact ID.
To save a conversation participant to your IM contacts,
select OptionsAdd to IM contacts.
To remove a member from the IM group, select
OptionsRemove.
To save a conversation, while in the conversation view,
select OptionsRecord chat. The conversation is
saved as a text file that can be opened and viewed in
the Notes application.
To provide members with editing rights to the group,
select OptionsAdd editor. Select a user from your
IM contacts or enter the ID of the user. IM users with
editing rights can edit group settings and invite other
users to join the group or ban them from the group.
To remove editing rights from a group member, select
OptionsRemove.
Cyan Magenta Yellow Black
65
To prevent IM users from joining the group, select
OptionsAdd to banned list. Select a user from your
IM contacts or enter the ID of the user.
To allow a banned user to join the group, select
OptionsRemove.
Block users
Select IM contactsOptionsBlocking options
View blocked list.
To find a blocked IM user, enter the first letters of the
user's name. Matching names appear in a list.
To allow receiving messages from a blocked IM user,
select OptionsUnblock.
To prevent receiving messages from other IM users,
select OptionsBlock new contacts. Select the IM
user from your IM contacts, or enter the user ID.
IM application settings
66
Select OptionsSettingsIM settings and define
the following settings:
ವ Use screen name — To change the name that
identifies you in IM groups, select Yes.
ವ Show my availability — Select whether you allow
all other IM users or only your IM contacts to see
when you are online. Select To no-one to hide your
online status.
ವ Allow messages from — Select to receive instant
messages from all other IM users, your IM contacts
only, or not to receive messages at all.
ವ Allow invitations from — Select to receive
invitations to IM groups from all IM users, your IM
contacts only, or not to receive invitations at all.
ವ Msg. scrolling speed — To decrease or increase the
speed at which new messages are displayed, scroll
left or right.
ವ Sort IM contacts — Select to list your IM contacts
alphabetically or by their online status.
ವ Availability reloading — To update the online
status of your IM contacts automatically, select
Automatic.
ವ Offline contacts — Select if IM contacts with an
offline status are shown in the IM contacts list.
ವ Own message colour — Select the colour of the
instant messages you send.
ವ Received msg colour — Select the colour of the
instant messages you receive.
ವ Show date/ time info — Select Yes to view the
receiving or sending time of each message in an IM
conversation.
ವ IM alert tone — Select the tone that is played when
you receive a new instant message.
Special message types
Select MenuCommunic.Messaging.
You can receive special messages that contain data,
such as operator logos, ringing tones, bookmarks, or
internet access or e-mail account settings.
To save the contents of these messages, select
OptionsSave.
Cyan Magenta Yellow Black
Service messages
Service messages are sent to your device by service
providers. Service messages may contain notifications
such as news headlines, services, or links through
which the message content can be downloaded.
To define the service message settings, select
OptionsSettingsService message.
To download the service or message content, select
OptionsDownload message.
To view information about the sender, web address,
expiration date, and other details of the message
before downloading it, select OptionsMessage
details.
Send service commands
You can send a service request message (also known
as a USSD command) to your service provider and
request activation for certain network services. Contact
your service provider for the service request text.
To send a service request message, select Options
Service command. Enter the service request text and
select OptionsSend.
Cell broadcast
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuCommunic.Messaging
OptionsCell broadcast.
With the cell broadcast network service, you can
receive messages on various topics from your service
provider, such as weather or traffic conditions in a
particular region. For available topics and relevant
topic numbers, contact your service provider. Cell
broadcast messages cannot be received when the
device is in the remote SIM mode. A packet data (GPRS)
connection may prevent cell broadcast reception.
Cell broadcast messages cannot be received in UMTS
(3G) networks.
To receive cell broadcast messages, you may need to
set the cell broadcast reception on. Select Options
SettingsReceptionOn.
To view messages related to a topic, select the topic.
To receive messages related to a topic, select
OptionsSubscribe.
Tip: You can set important topics as hot topics.
While the device is in the standby mode, you are
notified when you receive a message related to
a hot topic. Select a topic, and select Options
Hotmark.
To add, edit, or delete topics, select Options
Topic.
Messaging settings
Select MenuCommunic.Messaging
OptionsSettings.
Cyan Magenta Yellow Black
67
Fill in all fields marked with Must be defined or with
a red asterisk.
Your device may recognise the SIM card provider and
configure the correct text message, multimedia
message, and GPRS settings automatically. If not,
contact your service provider for the correct settings,
order the settings from your service provider in a
configuration message, or use the Settings wizard
application.
Text message settings
68
Select MenuCommunic.Messaging
OptionsSettingsText message.
Select from the following:
ವ Message centres — View the available message
centres for your device, or create a new one.
ವ Message centre in use — Select a message centre
to send the message.
ವ Character encoding — Select Reduced support to
use automatic character conversion to another
encoding system when available.
ವ Receive report — Select Yes if you want the
network to send you delivery reports on your
messages (network service).
ವ Message validity — Select how long the message
centre resends your message if the first attempt fails
(network service). If the recipient cannot be reached
within the validity period, the message is deleted
from the message centre.
ವ Message sent as — Convert the message to another
format, such as Text, Fax, Paging, or E-mail.
Change this option only if you are sure that your
message centre is able to convert text messages into
these other formats. Contact your service provider.
ವ Preferred connection — Select the preferred
method of connection when sending text messages
from your device.
ವ Reply via same centre — Select whether you want
the reply message to be sent using the same text
message centre number (network service).
Multimedia message
settings
Select MenuCommunic.Messaging
OptionsSettingsMultimedia message.
Select from the following:
ವ Image size — Select Small or Large to scale images
in multimedia messages. Select Original to
maintain the original image size.
ವ MMS creation mode — Select Restricted to have
your device prevent you from including content in
multimedia messages that may not be supported by
the network or the receiving device. To receive
warnings about including such content, select
Guided. To create a multimedia message with no
restrictions on attachment type, select Free. If you
select Restricted, creating multimedia
presentations is not possible.
ವ Access point in use — Select the default access
point to connect to the multimedia message centre.
You may not be able to change the default access
point if it is preset in your device by your service
provider.
Cyan Magenta Yellow Black
ವ Multimedia retrieval — Select Always
automatic to receive multimedia messages always
automatically, Auto in home netw. to receive
notification of a new multimedia message that you
can retrieve from the message centre (for example,
when you are travelling abroad and are outside your
home network), Manual to retrieve multimedia
messages from the message centre manually, or
Off to prevent receipt of any multimedia messages.
ವ Allow anon. msgs. — Select whether you want to
receive messages from unknown senders.
ವ Receive adverts — Select whether you want to
receive messages defined as advertisements.
ವ Receive report — Select Yes to have the status of
the sent message to be shown in the log (network
service). Receiving a delivery report of a multimedia
message that has been sent to an e-mail address
may not be possible.
ವ Deny report sending — Select Yes to not send
delivery reports from your device for received
multimedia messages.
ವ Message validity — Select how long the messaging
centre tries to send the message (network service).
If the recipient of a message cannot be reached
within the validity period, the message is removed
from the multimedia messaging centre. Maximum
time is the maximum amount of time allowed by
the network.
E-mail account settings
Select MenuMessagingOptionsSettings
E-mail.
If you try to edit mailbox settings but have not set up
an e-mail account, the mailbox guide opens and helps
you set up your e-mail account.
If you have defined a mailbox, scroll to it, and press the
scroll key to edit the settings.
The settings available for editing may vary. Some
settings may be preset by your service provider.
Connection settings
To define the connection settings, select an e-mail
account and OptionsEditConnection
settings. To edit the settings for the e-mail you receive,
select Incoming e-mail. To edit the settings for the email you send, select Outgoing e-mail.
User settings
To define the user settings for an e-mail account, select
the account, select OptionsEditUser settings,
and define the following settings:
ವ My name — Enter a name to appear before your email address when you send e-mail.
ವ Reply-to — Select whether you want replies to be
redirected to a different address. Select On, and
enter the e-mail address to which you want to direct
the replies. You can only enter one address to which
replies are directed.
ವ Delete e-mails from — Select whether you want to
delete the e-mail messages only from the device or
from both the device and the server. Select Always
ask if you want to confirm from where the e-mail
should be deleted every time you delete an e-mail.
ವ Send message — Select to send the e-mail
immediately or when a connection is available.
Cyan Magenta Yellow Black
69
ವ Send copy to self — Select whether you want to
save a copy of the e-mail to your remote mailbox
and to the address defined in My e-mail address in
the Outgoing e-mail settings.
ವ Include signature — Select whether you want to
attach a signature to your e-mail messages.
ವ New e-mail alerts — Select whether you want to
be notified of a new received e-mail message with
a tone and a note.
Retrieval settings
To define the retrieval settings, select the e-mail
account, select OptionsEditRetrieval
settings, and define the following settings:
ವ E-mail to retrieve — Select whether you want to
retrieve only the e-mail header information such as
sender, subject and date, e-mail, or e-mail with
attachments. This setting is for POP3 mailboxes
only.
ವ Retrieval amount — Select the number of e-mail
messages you want to retrieve from the remote
server to your mailbox.
ವ IMAP4 folder path — Define the folder path for
folders to be subscribed. This setting is for IMAP4
mailboxes only.
ವ Folder subscriptions — Subscribe to other folders
in the remote mailbox and retrieve content from
those folders. This setting is for IMAP4 mailboxes
only.
Automatic retrieval settings
70
Automatic retrieval, and define the following
settings:
ವ E-mail retrieval — Select Enabled to retrieve new
e-mail messages automatically from your remote
mailbox, or Only in home netw. to retrieve new email messages automatically from your remote
mailbox only when you are in your home network
and not, for example, travelling.
ವ Retrieval days — Select the days on which e-mail
is retrieved to your device.
ವ Retrieval hours — Define the hours between which
the e-mail is retrieved.
ವ Retrieval interval — Select the interval between
retrieving new e-mail messages.
ವ E-mail notifications — Select whether you want to
receive notifications on received e-mail.
Service message settings
Select MenuCommunic.Messaging
OptionsSettingsService message.
To receive service messages from service providers,
select Service messagesOn.
To select how to download services and service
message content, select OptionsSettings
Service messageDownload messages
Automatically or Manually. If you select
Automatically, you may still need to confirm some
downloads since not all services can be downloaded
automatically.
To define the automatic retrieval settings for an e-mail
account, select the account, select OptionsEdit
Cyan Magenta Yellow Black
Cell broadcast settings
Select MenuCommunic.Messaging
OptionsSettingsCell broadcast.
To receive cell broadcast messages, select
ReceptionOn.
To select the languages in which you want to receive
cell broadcast messages, select Language.
To display new topics in the cell broadcast topics list,
select Topic detectionOn.
Other settings
Select MenuCommunic.Messaging
OptionsSettingsOther.
Select from the following:
ವ Save sent messages — Select whether to store
sent messages in the Sent folder.
ವ Number of saved msgs. — Enter the number of
sent messages to save. When the limit is reached,
the oldest message is deleted.
ವ Memory in use — Select where to save your
messages. You can save messages to the memory
card only if a memory card is inserted.
ವ Folder view — Define how you want the messages
in Inbox to be shown.
71
Cyan Magenta Yellow Black
Phone
To make and receive calls, the device must be switched
on, the device must have a valid SIM card installed, and
you must be located in the service area of a cellular
network.
To make or receive a net call, your device must be
connected to a net call service. To connect to a net call
service, your device must be in the coverage of a
connection network, such as a WLAN access point.
Voice calls
Note: The actual invoice for calls and services from
your service provider may vary, depending on network
features, rounding off for billing, taxes, and so forth.
Answer a call
To answer a call, press the call key.
To reject a call, press the end key.
To mute the ringing tone instead of answering a call,
select Silence.
72
When you have an active call and the call waiting
function (network service) is activated, press the call
key to answer a new incoming call. The first call is put
on hold. To end the active call, press the end key.
Make a call
Important: If the device has been locked, enter the
lock code to activate the phone function. When the
device is locked, calls may be possible to the official
emergency number. Making an emergency call in the
offline profile or when the device is locked requires
that the device recognise the number to be an official
emergency number. It is advisable to change the
profile or unlock the device by entering the lock code
before you make the emergency call.
Dial 0 for DDD calls or 00 for DDI calls, your choice of
operator code, country or city area code, the phone
number, and press the call key.
Tip: Note that the symbol + only works from
abroad.
To end the call or cancel the call attempt, press the end
key.
To make a call using the saved contacts, press the
contacts key. Enter the first letters of the name, scroll
to the name, and press the call key. See "Nokia Contacts
for Eseries", p. 30.
Cyan Magenta Yellow Black
To make a call using the log, press the call key to view
up to 20 numbers that you last called or attempted to
call. Scroll to the desired number or name, and press
the call key. See "Log", p. 82.
To adjust the volume of an active call, use the volume
keys.
To switch from a voice call to a video call, select
OptionsSwitch to video call. The device ends the
voice call and makes a video call to the recipient.
Make a conference call
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
1. To make a conference call, enter a participant's
phone number, and press the call key.
2. When the participant answers, select Options
New call.
3. When you have made a phone call to all the
participants, select OptionsConference to
merge the calls into a conference call.
To mute the microphone of your device during the call,
select OptionsMute.
To drop a participant from the conference call, scroll to
the participant, and select OptionsConference
Drop participant.
Fax calls
To make and receive fax calls, connect your device to a
compatible computer or fax machine. To activate the
fax modem, select OptionsActivate modem. You
can answer incoming fax calls only from the computer
or fax machine connected to your device.
To reject an incoming fax call, select Options
Reject.
To reject a call while a fax call is in progress, select
Reject.
A fax call cannot be put on hold.
Video calls
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
To be able to make a video call, you need to be in the
coverage of a UMTS network. For availability of and
subscription to video call services, contact your
network operator or service provider. While talking,
you can see a real-time, two-way video between you
and the recipient of the call, if the recipient has a
compatible mobile phone. The video image captured
by the camera in your device is shown to the video call
recipient. A video call can only be made between two
parties.
To discuss privately with a conference call participant,
scroll to the participant, and select Options
ConferencePrivate.
Cyan Magenta Yellow Black
73
Make a video call
Share a video
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Use Video sharing (network service) to send live video
or a video clip from your mobile device to another
compatible mobile device during a voice call. To use
this feature, the device must be within the coverage of
a UMTS network.
1. Make a phone call to the selected recipient. You can
start sharing a video once the phone call is
established and your device has been registered to
the SIP server.
2. To send live video or a video clip from your device,
select OptionsShare videoLive or Clip. To
preview the clip, select OptionsPlay.
3. Select the recipient from Contacts, or enter the
recipient's SIP address manually to send an
invitation to the recipient. Sharing begins
automatically when the recipient accepts the video
sharing.
4. To end sharing the video, select Stop. The voice call
continues normally.
To make a video call, enter the phone number or select
the recipient of the call from Contacts, and select
OptionsCallVideo call. When the video call
starts, the camera of the device is activated. If the
camera is already in use, video sending is disabled. If
the recipient of the call does not want to send a video
back to you, a still image is shown instead. You can
define the still image in MenuToolsSettings
PhoneCallImage in video call.
To disable the sending of audio, video, or video and
audio, select OptionsDisableSending audio,
Sending video, or Sending aud. & video.
To use the loudspeaker for receiving audio, select
OptionsActivate loudspeaker. To mute the
loudspeaker and use the earpiece, select Options
Activate handset.
To swap the places of images, select Options
Change image order.
To zoom the image on the display, select Options
Zoom in or Zoom out.
To end the video call and make a new voice call to the
same recipient, select OptionsSwitch to voice
call.
74
Receive a video sharing
invitation
When you receive a video sharing invitation, a message
is displayed showing the caller's name or SIP address.
Cyan Magenta Yellow Black
To accept the invitation and begin the sharing session,
select Accept.
To reject the invitation, select Reject. The voice call
continues normally.
telephone. To make or receive a net call, your device
must be within WLAN coverage, for example. The
availability of the net call service may vary according
to your country or area.
Create a net call profile
Net calls
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuCommunic.Internet tel..
Your device supports voice calls over the internet (net
calls). Your device attempts emergency calls primarily
over cellular networks. If an emergency call using
cellular networks is not successful, your device
attempts an emergency call through your net call
provider. Due to the established nature of cellular
telephony, you should use cellular networks for
emergency calls, if possible. If you have cellular
network coverage available, make sure that your
cellular phone is switched on and ready to make calls
before you attempt an emergency call. The capability
for an emergency call using internet telephony
depends on the availability of a WLAN and your net call
provider's implementation of emergency call
capabilities. Contact your net call provider to check the
internet telephony emergency call capability.
With the net call service (network service), you can
make and receive calls over the internet using the VoIP
(voice over internet protocol) technology. Net calls can
be established between computers, between mobile
phones, and between a VoIP device and a traditional
Before you can make net calls, you need to create a net
call profile.
1. Select MenuToolsSettings
ConnectionSIP settingsOptionsNew
SIP profile, and enter the required information. To
make the login to the net call service automatic,
select RegistrationAlways on. Contact your net
call provider for the correct settings.
2. Select Back until you return to the Connection
settings main view.
3. Select Internet tel.OptionsNew profile.
Enter a name for the profile, and select the SIP
profile you just created.
To set the created profile to be used automatically
when connecting to the net call service, select Menu
Communic.Internet tel.Preferred profile.
To login to the net call service manually, select
RegistrationWhen needed in the SIP settings
when creating a net call profile.
To make secure net calls, ask your service provider for
secure net call settings. The proxy server selected for
the net call profile must support secure net calls. A
secure net call is indicated with .
Cyan Magenta Yellow Black
75
Connect to the net call
service
Select MenuCommunic.Internet tel..
To make or receive a net call, your device must be
connected to a net call service. If you have selected
automatic login, your device automatically connects to
the net call service. If you login to the service manually,
select an available network from the list and Select.
The list of networks is refreshed automatically every 15
seconds. To refresh the list manually, select Options
Refresh. Use this option if your WLAN is not shown on
the list.
To select a net call service for outgoing calls if the
device is connected to more than one service, select
OptionsChange service.
To configure new services, select Options
Configure service. This option is shown only if there
are services that have not been configured.
To save the network to which you are currently
connected, select OptionsSave network. The
saved networks are marked with a star on the list of
networks.
To connect to a net call service using a hidden WLAN,
select OptionsUse hidden network.
To end the connection to a net call service, select
OptionsDisconnect from service.
76
Make net calls
You can make a net call from all applications where you
can make a regular voice call. For example in Contacts,
scroll to the desired contact, and select CallInternet
call.
To make a net call in the home screen, enter the SIP
address, and press the call key.
To set net call as the preferred call type for outgoing
calls, select MenuCommunic.Internet tel.
OptionsSettingsDefault call typeInternet
call. When your device is connected to a net call service,
all calls are made as net calls.
Net call service settings
Select OptionsSettings, scroll to the settings of the
desired service, and press the scroll key.
To login automatically to the net call service, select
Login typeAutomatic. If you use the automatic
login type for WLANs, the device periodically scans for
WLANs, which increases the demand on battery power
and reduces the battery life.
To login manually to the net call service, select Login
typeManual.
To view the networks you have saved for the net call
service and the networks detected by the net call
service, select Saved conn. networks.
To define the service-specific settings, select Edit
service settings. This option is only available if a
service-specific software plug-in has been installed in
the device.
Cyan Magenta Yellow Black
Speed dialling
Select MenuToolsSettingsPhoneCall
Speed diallingOn.
Speed dialling allows you to make a call by pressing
and holding a number key when in the home screen.
To assign a number key to a phone number, select
MenuCommunic.Speed dial. Scroll to the
number key (2 - 9) on the display, and select Options
Assign. Select the desired number from Contacts.
To delete the phone number assigned to a number key,
scroll to the speed dialling key, and select Options
Remove.
To modify a phone number assigned to a number key,
scroll to the speed dialling key, and select Options
Change.
ವ If not answered — Divert incoming calls after your
device rings for a specified period of time. Select the
time you let the device ring before diverting the call
in the Delay time: list.
ವ If out of reach — Divert calls when the device is
switched off or out of network coverage.
ವ If not available — Activate the last three settings
at the same time. This option diverts calls if your
device is busy, not answered, or out of reach.
To divert calls to your voice mailbox, select a call type
and a diverting option, then select Options
ActivateTo voice mailbox.
To divert calls to another phone number, select a call
type and a diverting option, then select Options
ActivateTo other number. Enter a number in the
Number: field, or select Find to retrieve a number
saved in Contacts.
To check the current diverting status, scroll to the
diverting option, and select OptionsCheck status.
Call divert
Select MenuToolsSettingsPhoneCall
divert.
Divert incoming calls to your voice mailbox or to
another phone number. For details, contact your
service provider.
Select to divert voice or fax calls, and select from the
following options:
ವ All voice calls or All fax calls — Divert all incoming
voice or fax calls.
ವ If busy — Divert incoming calls when you have an
active call.
To stop diverting calls, scroll to the diverting option,
and select OptionsCancel.
Call barring
Select MenuToolsSettingsPhoneCall
barring.
You can bar the calls that can be made or received with
the device (network service). To change the settings,
you need the barring password from your service
provider. Call barring affects all call types.
Cyan Magenta Yellow Black
77
Call barring and call diverting cannot be active at the
same time.
When calls are barred, calls may be possible to certain
official emergency numbers.
To bar calls, select Voice call barring and from the
following options:
ವ Outgoing calls — Prevent making voice calls with
your device.
ವ Incoming calls — Prevent incoming calls.
ವ International calls — Prevent calling to foreign
countries or regions.
ವ Incoming calls when abroad — Prevent incoming
calls when outside your home country.
ವ International calls except to home country
— Prevent calls to foreign countries or regions, but
allow calls to your home country.
To check the status of voice call barrings, select the
barring option and OptionsCheck status.
Send DTMF tones
You can send dual tone multi-frequency (DTMF) tones
during an active call to control your voice mailbox or
other automated phone services.
Send a DTMF tone sequence
1. Make a call, and wait until the other end answers.
2. Select OptionsSend DTMF.
3. Enter the DTMF tone sequence, or select a
predefined sequence.
Attach a DTMF tone sequence to a contact
card
To change the password used for barring voice and fax
calls, select Voice call barringOptionsEdit
barring password. Enter the current code, then the
new code twice. The barring password must be four
digits long. For details, contact your service provider.
1. Select MenuCommunic.Contacts. Open a
contact, and select OptionsEditOptions
Add detailDTMF.
2. Enter the tone sequence. To insert a pause of about
2 seconds before or between DTMF tones, enter p.
To set the device to send the DTMF tones only after
you select Send DTMF during a call, enter w.
3. Select Done.
Bar net calls
Voice mail
Select MenuToolsSettingsPhoneCall
barringInternet call barring.
Select MenuCommunic.Call mailbox.
To stop all voice call barrings, select a barring option
and OptionsCancel all barrings.
78
To reject net calls from anonymous callers, select
Anonymous call barringOn.
Cyan Magenta Yellow Black
When you open the Voice mail application for the first
time, you are asked to enter the number of your voice
mailbox.
To call your voice mail, select OptionsCall voice
mailbox.
If you have configured net call settings to your device
and have an internet call mailbox, select Internet call
mailboxOptionsCall internet call mbx. to call
it.
To call your voice mail when in the home screen, press
and hold 1; or press 1 and then the call key. If you have
defined an internet call mailbox, select whether you
want to call your voice mail or internet call mailbox.
To listen to your voice messages, select Voice
mailbox.
To dial a telephone number, select Dialler.
To use voice commands to make a phone call, select
Voice commands.
To have your received messages read aloud, select
Message reader.
To hear the current time, select ClockTime. To hear
the current date, select ClockDate.
If the Voice aid application is open when a calendar
alarm is due, the application reads the calendar alarm
content aloud.
To change the voice mailbox number, select the
mailbox and OptionsChange number.
To hear more options, select Options.
To change the internet call mailbox address, select the
mailbox and OptionsChange address.
Voice commands
Voice aid
Select MenuToolsVoice aid.
The Voice aid application reads text on the display,
allowing you to use the basic functions of your device
without looking at the display.
To hear the entries in your contacts list, select
Contacts. Do not use this option if you have more than
500 contacts.
Select MenuToolsVoice comm..
Use voice commands to make phone calls and launch
applications, profiles, or other functions on the device.
The device creates a voice tag for the entries in Contacts
and for the functions designated in the Voice
commands application. When a voice command is
spoken, the device compares the spoken words to the
voice tag in the device. Voice commands are not
dependent on a speaker’s voice; however, the voice
recognition in the device adapts to the main user’s
voice to recognise voice commands better.
To hear information on your missed and received calls,
dialled numbers, and frequent calls, select Recent
calls.
Cyan Magenta Yellow Black
79
Make a call
A voice tag for a contact is the name or nickname that
is saved on the contact in Contacts.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
To listen to a voice tag, open a contact, and select
OptionsPlay voice tag.
1. To make a call using a voice command, press and
hold the voice key.
2. When you hear the tone or see the visual display,
clearly speak the name saved on the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout
of 1.5 seconds, the device dials the number. If the
recognised contact was not correct, select Next to
view a list of other matches or Quit to cancel
dialling.
If several numbers are saved under the contact, the
device selects the default number, if it has been set.
Otherwise, the device selects the first available
number of the following fields: Mobile, Mobile
(home), Mobile (business), Telephone, Tel.
(home), and Tel. (business).
To launch an application using a voice command, press
and hold the voice key, and clearly speak the name of
the application. If the recognised application was not
correct, select Next to view a list of other matches or
Quit to cancel.
To add more applications to the list, select Options
New application.
To change the voice command of an application, select
OptionsChange command, and enter the new
command.
Change profiles
The device creates a voice tag for each profile. To set
on a profile using a voice command, press and hold the
voice key, and say the name of the profile.
To change the voice command, select Profiles
OptionsChange command.
Voice command settings
To switch off the synthesiser that plays recognised
voice commands in the selected device language,
select SettingsSynthesiserOff.
To reset voice recognition learning when the main user
of the device has changed, select Remove voice
adapts..
Launch an application
80
The device creates voice tags for the applications listed
in the Voice commands application.
Cyan Magenta Yellow Black
Log in to PTT service
Push to talk
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuCommunic.PTT.
Push to talk (PTT) (network service) provides direct
voice communication connected with the push of a key.
With PTT, you can use your device as a walkie-talkie.
You can use PTT to have a conversation with one person
or with a group of people, or join a channel. A channel
is like a chat room: you can call the channel to see if
anyone is online. The channel call does not alert the
other users; the users just join the channel and start
speaking with each other.
In PTT communication, one person talks while the
other users listen through the built-in loudspeaker.
Users take turns responding to each other. Because
only one user can talk at a time, the maximum duration
of a speech turn is limited. For details of the speech turn
duration for your network, contact your service
provider.
PTT settings
Select OptionsSettings and select User settings to
define your preferences for PTT, or Connection
settings to change the connection details. Contact
your service provider for the correct settings.
Tip: You may also receive the settings in a
message from the provider of the PTT service.
If you have set Application start-up on in User
settings, PTT automatically logs in to the service when
started. If not, you must log in manually.
To log in to the PTT service manually, select Options
Log in to PTT.
When the Ringing type setting of your device is set to
Beep once or Silent, or there is an ongoing phone call,
you cannot make or receive PTT calls.
Make a PTT call
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To make a PTT call, select OptionsContacts, select
one or several contacts from the list, and press the
voice key. Remember to hold the device in front of you
during the call so you can see the display. The display
informs you when it is your turn to speak. Speak
towards the microphone, and do not cover the
loudspeaker with your hands. Press and hold the voice
key the entire time you are talking. When you have
finished talking, release the key.
To end the PTT call, press the end key.
When you receive a PTT call, press the call key to answer
the call or the end key to dismiss the call.
Cyan Magenta Yellow Black
81
To join a channel, select the channel you want to talk
to, and press the voice key.
Created PTT calls
Select OptionsPTT logCreated PTT, and a call.
To make a PTT call to a contact, select OptionsTalk
1 to 1.
To invite a user to a channel, select OptionsSend
invitation.
To create a contact, select OptionsSave to
Contacts.
To view the currently active users of a channel, select
OptionsActive members.
When you log in to PTT, you are automatically
connected to the channels that were active when the
application was last closed.
Manage PTT contacts
Exit PTT
To view, add, modify, delete, or call contacts, select
OptionsContacts. A list of names from the Contacts
application is displayed with information about their
login status.
To exit PTT, select OptionsExit. Select Yes to log
out and close the service. Select No if you want to keep
the application active in the background.
To call a selected contact, select OptionsTalk 1 to
1.
Log
To make a group call, select several contacts and
OptionsTalk to many.
Select MenuLog.
Log stores information about the communication
history of the device. The device registers missed and
received calls only if the network supports these
functions, the device is switched on and within the
network service area.
To send a request to a contact to call you, select
OptionsSend callback request.
To send the contact a request to call you, select
OptionsSend callback request.
To answer a callback request, select Show to open the
callback request. To make a PTT call to the sender, press
the voice key.
Call and data registers
Create a PTT channel
82
To create a channel, select OptionsNew
channelCreate new.
To view recently missed, received, and dialled calls,
select Recent calls.
Tip: To open Dialled numbers when in the
home screen, press the call key.
Cyan Magenta Yellow Black
To view the approximate duration of calls to and from
your device, select Call duration.
To view the amount of data transferred during packet
data connections, select Packet data.
Monitor all communications
To monitor all voice calls, text messages, or data
connections registered by the device, open the general
log tab.
To view detailed information about a communication
event, scroll to it, and press the scroll key.
Tip: Subevents, such as a text message sent in
more than one part and packet data
connections, are logged as one communication
event. Connections to your mailbox, multimedia
messaging centre, or web pages are shown as
packet data connections.
Call and send messages from
Log
To call back a caller, select Recent calls and open
Missed calls, Received calls, or Dialled numbers.
Select the caller, and OptionsCall.
To reply to a caller with a message, select Recent
calls and open Missed calls, Received calls, or Dialled
numbers. Select the caller, and select Options
Create message. You can send text messages and
multimedia messages.
Log settings
To set the time for keeping all communication events
in the log, select OptionsSettingsLog
duration, and the time. If you select No log, all log
contents are permanently deleted.
To add the phone number from a communication event
to Contacts, select OptionsSave to Contacts, and
select to create a new contact or to add the phone
number to an existing contact.
To copy the number, for example to paste it to a text
message, select OptionsCopy number.
To view a single type of communication event or
communication events with one other party, select
OptionsFilter, and select the desired filter.
To erase the contents of the log, recent calls register,
and messaging delivery reports permanently, select
OptionsClear log.
Cyan Magenta Yellow Black
83
Travelling
Need directions? Looking for a restaurant? Your Eseries
device has the tools to get you where you want to be.
About GPS and
satellite signals
84
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites and
their ground stations that monitor the operation of the
satellites. Your device has an internal GPS receiver.
A GPS terminal receives low-power radio signals from
the satellites and measures the travel time of the
signals. From the travel time, the GPS receiver can
calculate its location to the accuracy of metres.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by
adjustments to GPS satellites made by the United States
government and is subject to change with the United
States Department of Defense civil GPS policy and the
Federal Radionavigation Plan. Accuracy can also be
affected by poor satellite geometry. Availability and
quality of GPS signals may be affected by your location,
buildings, natural obstacles, and weather conditions.
The GPS receiver should only be used outdoors to allow
reception of GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular radio
networks for positioning or navigation.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
To enable or disable different positioning methods,
such as Bluetooth GPS, select MenuTools
SettingsGeneralPositioningPositioning
methods.
About satellite signals
If your device cannot find the satellite signal, consider
the following:
ವ If you are indoors, go outdoors to receive a better
signal.
ವ If the numeric keypad slide is closed, open it.
Cyan Magenta Yellow Black
ವ If you are outdoors, move to a more open space.
ವ Ensure that your hand does not cover the GPS
antenna of your device.
ವ If the weather conditions are bad, the signal
strength may be affected.
ವ Establishing a GPS connection may take from a
couple of seconds to several minutes.
Satellite status
To check how many satellites your device has found,
and whether your device is receiving satellite signals,
select MenuGPSGPS dataPosition
OptionsSatellite status. If your device has found
satellites, a bar for each satellite is shown in the
satellite info view. The longer the bar, the stronger the
satellite signal. When your device has received enough
data from the satellite signal to calculate the
coordinates of your location, the bar turns black.
Initially your device must receive signals from at least
four satellites to be able to calculate the coordinates of
your location. When the initial calculation has been
made, it may be possible to continue calculating the
coordinates of your location with three satellites.
However, the accuracy is generally better when more
satellites are found.
Positioning settings
Select MenuToolsSettingsGeneral
Positioning.
To use a specific positioning method to detect the
location of your device, select Positioning methods.
To select a positioning server, select Positioning
server.
Maps
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuGPSMaps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, and save
locations and send them to compatible devices. You
can also purchase licences for extra services, such as
travel guides, traffic information, and navigation
service with voice guidance. These services are not
available for all countries or regions.
If you browse to an area which is not covered by maps
already downloaded in your device, a map for the area
is automatically downloaded through the internet.
Some maps may be available in your device or memory
card. You can also use the Nokia Map Loader PC
software to download maps. To install Nokia Map
Loader to a compatible PC, go to
www.maps.nokia.com.
Downloading maps may involve the transmission of
large amounts of data through your service provider's
network. Contact your service provider for information
about data transmission charges.
Cyan Magenta Yellow Black
85
When you use Maps for the first time, you may need to
select a cellular or a WLAN access point for
downloading maps. To change the access point later,
select OptionsSettingsInternetDefault
access point.
About Maps
To connect to the internet automatically when you
start Maps, select OptionsToolsSettings
InternetGo online at start-upAlways on.
To prevent automatic downloading of maps, select
OptionsToolsSettingsInternetGo
online at start-upNever.
To set the device to ask your permission before
connecting to the internet, select OptionsTools
SettingsInternetGo online at start-up
Always ask.
86
To be informed when your device registers to a
network other than your home network, select
OptionsToolsSettingsInternet
Roaming warningOn (shown only when you are
online). For details and roaming costs, contact your
service provider.
Tip: To avoid data transfer costs, you can also
use Maps without an internet connection, and
browse the maps that are saved in your device
or memory card.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography that you download for use in this device.
Move on a map
The map coverage varies by country and region.
When you open Maps, the capital of the country you are
in or the location that was saved from your last session
is shown. The map of the location is also downloaded,
if needed.
To zoom in to your GPS position or your last known
location, press 0.
When the GPS connection is active,
current location on the map.
shows your
To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
To zoom in and out on the map, press * and #.
When you browse the map on the display, a new map
is automatically downloaded if you scroll to an area
which is not covered by maps already downloaded.
These maps are free of charge, but downloading may
involve the transmission of large amounts of data
through your service provider's network. For more
information on data transmission charges, contact
your service provider. The maps are automatically
saved in the device memory or on a compatible
memory card (if inserted).
Display indicators
The GPS indicator
on the bottom right
corner of the display shows the availability and
strength of the satellite signal. One bar is one satellite.
When the device tries to find a satellite, the bar is
Cyan Magenta Yellow Black
yellow. When the device receives enough data from the
satellite to establish a GPS connection, the bar turns
green. The more green bars, the stronger the GPS
connection.
Initially, your device must receive signals from at least
four satellites to calculate the coordinates of your
location. After the initial calculation, signals from three
satellites may be enough.
shows the
The data transfer indicator
internet connection used and the amount of data
transferred since the application started.
Find locations
If you search for locations without an internet
connection, the search results are limited to a radius of
50 km (31 miles).
Plan a route
To plan a route, select your start point on the map or
search for a location, press the scroll key, and select
AddTo route.
To define the destination and add more locations for
your route, search for the location, and select
OptionsAdd route point.
To show the route on the map, select OptionsShow
route.
To find a location in the city or area displayed on the
map, enter the full or partial address of the location in
the search field, and press the scroll key. To find a
location in another city, enter the city and the full or
partial address, such as London Oxford Street, and
press the scroll key.
To find a specific address, or an address in another
country, press the scroll key, and select Search
Addresses. Country/Region * and City or post code
are mandatory.
Tip: To search for locations in another country
using the search field, enter also the name of the
country in the search field: Rome Italy.
To import a location address from the Contacts
application, press the scroll key and select Search
AddressesOptionsContact.
The search results are grouped by categories. To limit
the search to one category, select OptionsSearch.
To navigate to the destination by car or on foot, if you
have purchased a licence for these extra services, select
OptionsStart driving or Start walking.
To save the route, select OptionsSave route.
Walk to your destination
The walking route ignores any possible limitations to
car navigation, such as one-way streets and turn
restrictions, and includes areas such as pedestrian
zones and parks. It also prioritises walkways and
smaller roads, and omits highways and motorways.
The route is drawn to the map, and the arrow indicates
the direction. The small dots show in which direction
you are walking.
The length of a walking route is limited to a maximum
of 50 kilometres (31 miles) and the travelling speed to
a maximum of 30 km/h (18 miles/h). If the speed limit
Cyan Magenta Yellow Black
87
is exceeded, navigation stops and is resumed once the
speed is back within limits.
There is no voice guidance available for pedestrian
navigation.
To purchase a licence for pedestrian navigation, select
OptionsExtrasWalk. The licence is regionspecific and can be used only in the selected area. You
can pay for the licence through a credit card or in your
phone bill, if supported by your service provider.
Tip: To try out navigation for three days with a
free licence, press the scroll key and select Walk
to. Maps checks if a free licence is available for
your device. To activate the licence, select OK.
You can only use the licence once.
To start navigating, select a location and Options
Walk to.
To find an alternative route, select Options
Different route.
To stop navigating, select OptionsStop
navigation.
Drive to your destination
88
To purchase a licence for pedestrian and car navigation
with voice guidance, select OptionsExtrasDrive
& Walk. The licence is region-specific and can be used
only in the selected area.
Tip: To try out navigation for three days with a
free licence, press the scroll key and select Drive
to. Maps checks if a free licence is available for
your device. To activate the licence, select OK.
You can only use the licence once.
To start navigating by car, select a location, press the
scroll key, and select Drive to. When you use car
navigation for the first time, you are asked to select the
language of the voice guidance and download the
related voice guidance files. To change the language
later, in the main view, select OptionsTools
SettingsNavigationVoice guidance. Voice
guidance is not available for pedestrian navigation.
To switch between different views during the
navigation, press the scroll key, and select Manoeuvre
view, Bird's-eye view, or Arrow view.
To find an alternative route, select OptionsDiff.
route.
To repeat the voice guidance, select Options
Repeat.
To stop navigating, select OptionsStop
navigation.
Traffic information
The real-time traffic information service provides
information about traffic events that may affect your
travel. The traffic information service is an extra service
that you can purchase and download into your device,
if available in your country or region.
To purchase a licence for the traffic information service,
select OptionsExtrasTraffic info.
To view information about traffic events, select
OptionsTraffic info. The events are shown on the
map as triangles and lines.
Cyan Magenta Yellow Black
To view the details of an event, including possible
rerouting options, select the event and Options
Open.
GPS data
To update the traffic information, select Update traffic
info.
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuGPSGPS data.
With GPS data, you can view your current location, find
your way to a desired location, and track distance.
Select Navigation to view navigating information to
your trip destination, Position to view positioning
information about your current location, or Trip dist.
to view your travelling information such as the
distance and duration you have travelled, and your
average and maximum speeds.
The application must receive positioning information
from at least four satellites to be used as a travelling
aid.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Travel guides
Travel guides provide information about attractions,
restaurants, hotels, and other points of interest. Some
guides contain videos and audio clips. The guides must
be purchased and downloaded before use.
Downloading travel guides may involve the
transmission of large amounts of data through your
service provider’s network. Contact your service
provider for information about data transmission
charges.
To purchase and download travel guides, or to view
downloaded ones, select OptionsExtras
Guides.
To browse travel guide categories, select a category,
and press the scroll key. If there are subcategories,
select a subcategory, and press the scroll key again.
To download a new guide to your device, scroll to the
desired guide, and select Yes. You can pay for the
guides through a credit card or in your phone bill, if
supported by your service provider.
Use GPS data
To check the signal strength of the satellites that
provide the positioning information necessary for
navigation, open any of the three views and select
OptionsSatellite status.
To set a landmark or location as the destination of your
trip, select NavigationOptionsSet
destination. You can also enter the destination
latitude and longitude coordinates.
Cyan Magenta Yellow Black
89
To remove the destination set for your trip, select
NavigationOptionsStop navigation.
Create a landmark
To activate the trip meter, select Trip distance
OptionsStart. To stop the trip meter, select
OptionsStop.
To create a landmark, select OptionsNew
landmark. Select Current position to make a network
request for the latitude and longitude coordinates of
your current location, Use map to select the location
from a map, or Enter manually to fill in necessary
location information such as a name, category,
address, latitude, longitude, and altitude.
To reset all fields and start calculating the trip again,
select Trip distanceOptionsRestart.
To show the landmark on the map, select Options
Show on map.
To change the measuring system in use, select
OptionsSettingsMeasurement system
Metric or Imperial.
Edit landmarks
To save your current position as a landmark, select
Navigation or Position, and OptionsSave
position.
To enter the altitude calibration to correct the altitude
received from the positioning satellites, select
OptionsSettingsAltitude calibration.
Landmarks
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuGPSLandmarks.
Landmarks are coordinates to geographic locations
that you can save to your device for later use in
different location-based services. You can create
landmarks using the internal GPS receiver of your
device or network (network service).
To edit a landmark, select OptionsEdit
Options and from the following:
ವ Select categories — Organise the landmark to a
group of similar landmarks. Select a category to
modify landmark information such as a name,
category, address, latitude, longitude, and altitude.
ವ Retrieve current position — Request and
automatically fill in the geographical latitude and
longitude coordinates to make a landmark of your
current location.
ವ Delete — Remove the landmark.
ವ Landmark icon — Change the icon of the landmark.
ವ Show on map — Show the landmark on the map.
ವ Send — Send the landmark to compatible devices.
ವ Editing options — Edit the phone numbers and URL
addresses assigned to the landmark.
ವ Writing language — Change the writing language.
90
Cyan Magenta Yellow Black
Landmark categories
You can see the landmark categories in two views: one
lists categories that already contain landmarks, and
the other lists all the categories your device has.
To view the landmarks that a category contains, scroll
to the category, and press the scroll key.
To create a new category, select OptionsEdit
categoriesOptionsNew category.
To move a landmark from one category to another,
open the landmarks tab, select the landmark, and
OptionsAdd to category. Select the old category
to remove the mark next to it. Select the category or
categories to which you want to add the landmark.
Select Accept.
Receive landmarks
Select MenuCommunic.Messaging.
Open a message that contains a landmark you have
received from another device. Scroll to the landmark,
and press the scroll key.
To save the landmark in your device, select Options
Save.
To forward the landmark to compatible devices, select
OptionsSend.
To show the received landmark on the map, select
OptionsShow on map.
To find out how to navigate to the received landmark,
select OptionsShow route.
Cyan Magenta Yellow Black
91
Nokia Office Tools
Nokia Office Tools support mobile business and enable
effective communication with work teams.
Active notes
Select MenuOfficeActive notes.
Active notes allows you to create, edit, and view
different kinds of notes, for example, meeting memos,
hobby notes, or shopping lists. You can insert images,
videos, and sound in the notes. You can link notes to
other applications, such as Contacts, and send notes to
others.
To add boldface, italics, or underlining to your text or
change the font colour, press and hold the shift key and
use the scroll key to select the text. Then select
OptionsText.
To send the note using a text message, multimedia
message, e-mail, Bluetooth, or infrared, select
OptionsSend.
To link a note to a contact, select OptionsLink note
to callAdd contacts. You can see the note on the
display of your device when making a call to or
receiving a call from the contact.
Settings for Active notes
Create and edit notes
Select Settings.
To create a note, start writing.
To save notes to your device memory, select Memory
in usePhone memory. To save them to a memory
card, select Memory in useMemory card.
To edit a note, scroll to it, and press the scroll key.
To insert images, sound clips, video, business cards,
web bookmarks, and files, select OptionsInsert
object.
To add new items to the note, select OptionsInsert
new. You can record sound and video clips, and capture
images.
92
To change the layout of active notes, select Change
viewGrid. To view the notes as a list, select Change
viewList.
To see a note in the background when making or
receiving phone calls, select Show note during call
Yes.
Cyan Magenta Yellow Black
Tip: If you temporarily do not want to see the
notes during phone calls, select Show note
during callNo. This way you do not have to
remove the links between notes and contact
cards.
Calculator
File manager
With File manager, you can manage the contents and
properties of files and folders on your device memory
and memory card. You can open, create, move, copy,
rename, send, and search for files and folders.
Copyright protection may prevent sending some files.
Open the device tab or the memory card tab.
Select MenuOfficeCalculator.
This calculator has limited accuracy and is designed for
simple calculations.
To select multiple files, scroll to each file, and select
OptionsMark/UnmarkMark.
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract
from the function map. Enter the second number of the
calculation, and select =. The calculator performs
operations in the order they are entered. The result of
the calculation remains in the editor field and can be
used as the first number of a new calculation.
To move or copy files or folders to another folder, select
OptionsMove to folder or Copy to folder. Default
folders such as Sound clips in Gallery cannot be moved.
The device saves the result of the last calculation in its
memory. Exiting the Calculator application or
switching off the device does not clear the memory. To
recall the last saved result the next time you open the
Calculator application, select OptionsLast result.
To save the numbers or results of a calculation, select
OptionsMemorySave.
To retrieve the results of a calculation from the memory
and use them in a calculation, select Options
MemoryRecall.
To send the selected files, select OptionsSend.
To search for files, select OptionsFind. Enter the
search text, and press the scroll key. The folders and
files whose names contain the search text are
displayed.
To view information about the selected file, select
OptionsDetails. To view additional information
about the file online, select OptionsAdditional
details.
Quickoffice
Select MenuOfficeQuickoffice.
Quickoffice consists of Quickword for Microsoft Word,
Quicksheet for Microsoft Excel, Quickpoint for Microsoft
PowerPoint, and Quickmanager for purchasing
software. You can view Microsoft Office 2000, XP, and
Cyan Magenta Yellow Black
93
2003 documents (*.doc, *.xls, and *.ppt) with
Quickoffice. If you have the editor version of
Quickoffice, you can also edit files.
All file formats or features are not supported.
Work with files
To open a file, scroll to it, and press the scroll key.
To sort files according to the type, select Options
Sort by.
To view the details of a file, select Options
Details. The details include the name, size and location
of the file, and the time and date when the file was last
modified.
To send files to a compatible device, select Options
Send and the sending method.
Converter
Select MenuOfficeConverter.
The converter has limited accuracy, and rounding
errors may occur.
Convert measurements
94
1. Scroll to the Type field, and select Options
Conversion type to open a list of measures. Select
the measure to use, and select OK.
2. Scroll to the first Unit field, and select Options
Select unit. Select the unit from which to convert,
and select OK. Scroll to the next Unit field, and
select the unit to which to convert.
3. Scroll to the first Amount field, and enter the value
to convert. The other Amount field changes
automatically to show the converted value.
Set base currency and
exchange rate
When you change base currency, you must enter new
exchange rates because all previously set exchange
rates are cleared.
Before you can make currency conversions, you must
choose a base currency and add exchange rates. The
rate of the base currency is always 1. The base currency
determines the conversion rates of the other
currencies.
1. To set the rate of exchange for the unit of currency,
scroll to the Type field, and select Options
Currency rates.
2. Scroll to the currency type and enter the exchange
rate you would like to set per single unit of
currency.
3. To change the base currency, scroll to the currency,
and select OptionsSet as base currency.
4. Select DoneYes to save the changes.
After you have inserted all the necessary exchange
rates, you can make currency conversions.
Cyan Magenta Yellow Black
Zip manager
Select MenuOfficeZip.
With Zip manager, you can create new archive files to
store compressed ZIP formatted files; add single or
multiple compressed files or directories to an archive;
set, clear, or change the archive password for protected
archives; and change settings, such as compression
level, and file name encoding.
You can store the archive files on the device memory
or on a memory card.
PDF reader
Select MenuOfficeAdobe Reader.
With PDF reader you can read PDF documents on the
display of your device; search for text in the
documents; modify settings, such as zoom level and
page views; and send PDF files using e-mail.
printer as the default printer, select Options
Printing optionsPrinters, scroll to the printer and
select OptionsSet as default.
Before you print, make sure your device is properly
connected to the printer.
To print a document, select OptionsPrinting
optionsPrint.
To print to a file, select OptionsPrinting
optionsPrintPrint to file, and determine the
location for the file.
To change the printing options, select Options
Printing options. You can select the printer you want
to use, the number of copies and the range of pages
you want to print.
To change the page layout before printing, select
OptionsPrinting optionsPage setup. You can
change the paper size and orientation, define the
margins, and insert a header or a footer. The maximum
length of the header and footer is 128 characters.
To preview a file or message before you print, select
OptionsPrinting optionsPreview.
Printing
You can print documents, such as files, messages, or
web pages, from the device, preview a print job, define
page layout options, select a printer, or print to a file.
You may not be able to print all types of documents.
Print files
To configure a printer for your device, select Menu
OfficePrintersOptionsAdd. To set the
Printing options
Open a document, such as a file or message, and select
OptionsPrinting optionsPrint.
Define the following options:
ವ Printer — Select an available printer from the list.
ವ Print — Select All pages, Even pages, or Odd
pages as the print range.
Cyan Magenta Yellow Black
95
ವ Print range — Select All pages in range, Current
page, or Defined pages as the page range.
ವ Number of copies — Select the number of copies
to print.
ವ Print to file — Select to print to a file and determine
the location for the file.
The available options may vary.
Select MenuOfficePrinters.
To add a new printer, select OptionsAdd.
Define the following:
ವ Printer — Enter a name for the printer.
ವ Driver — Select a driver for the printer.
ವ Bearer — Select a bearer for the printer.
ವ Access point — Select the access point.
ವ Port — Select the port.
ವ Host — Define the host.
ವ User — Enter the user.
ವ Queue — Enter the print queue.
ವ Orientation — Select the orientation.
ವ Paper size — Select the paper size.
ವ Media type — Select the media type.
ವ Colour mode — Select the colour mode.
ವ Printer model — Select the printer model.
96
Clock
Select MenuOfficeClock.
Alarm clock
Open the alarm clock tab.
To set an alarm, select OptionsNew alarm. When
an alarm is active,
is displayed.
Printer settings
The available options may vary.
In Clock, you can view your local time and time zone
information, set and edit alarms, or modify date and
time settings.
To switch off the alarm, select Stop, or to stop the
alarm for 5 minutes, select Snooze. If the alarm time
is reached while the device is switched off, the device
switches itself on and starts sounding the alarm tone.
If you select Stop, the device asks whether you want
to activate the device for calls. Select No to switch off
the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To change the alarm time, select OptionsReset
alarm.
To remove the alarm, select OptionsRemove
alarm.
World clock
Open the world clock tab to check the time in different
cities.
To add a city to the world clock view, select Options
Add city.
To change the city that determines the time and date
in your device, select OptionsSet as current city.
Cyan Magenta Yellow Black
The city is displayed in the Clock main view, and the
time in your device is changed according to the city
selected. Check that the time is correct and matches
your time zone.
Clock settings
Select OptionsSettings.
To change the time or date, select Time or Date.
To change the clock shown on the home screen, select
Clock typeAnalogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device
(network service), select Network operator time
Auto-update.
To change the alarm tone, select Clock alarm tone.
Notes
Select MenuOfficeNotes.
You can create and send notes to other compatible
devices, and save received plain text files (.txt format)
to Notes.
Write and send notes
To write a note, start entering the text. The note editor
opens automatically.
To open a note, scroll to it, and press the scroll key.
To send a note to other compatible devices, select
OptionsSend.
To synchronise or to define synchronisation settings
for a note, select OptionsSynchronisation. Select
Start to initialise synchronisation or Settings to define
the synchronisation settings for the note.
Nokia Wireless
Keyboard
Wireless keyboards are available as separate
enhancements. To set up the Nokia Wireless Keyboard
or other compatible wireless keyboard supporting the
Bluetooth Human Interface Devices (HID) profile for use
with your device, use the Wireless keyboard
application.
1. Activate Bluetooth connectivity on your device:
select MenuConnectivityBluetooth
BluetoothOn. Make sure that you have set My
phone's visibilityShown to all.
2. Switch on the keyboard.
3. Select MenuOfficeWlss. keybd..
4. To start searching for devices with Bluetooth
connectivity, select OptionsFind keyboard.
5. Select the keyboard from the list, and press the
scroll key to start the connection.
6. To pair the keyboard with your device, enter a
passcode of your choice (1 to 9 digits) on the device
and the same passcode on your keyboard.
Cyan Magenta Yellow Black
97
7. If you are asked for a keyboard layout, select it from
a list on your device.
When the name of the keyboard appears, its status
changes to Keyboard connected, and the indicator of
your keyboard blinks slowly; the keyboard is ready for
use.
For details on the operation and maintenance of your
keyboard, see its user guide.
98
Cyan Magenta Yellow Black
Connectivity
Your device offers several options to connect to the
internet, a corporate intranet, or to another device or
computer.
Fast downloading
High-speed downlink packet access (HSDPA, also called
3.5G, indicated by
) is a network service in UMTS
networks and provides high-speed data downloads.
When HSDPA support in the device is activated and the
device is connected to a UMTS network that supports
HSDPA, downloading data such as messages, e-mail,
and browser pages through the cellular network may
be faster. An active HSDPA connection is indicated by
. The icon may vary between regions.
To activate or deactivate HSDPA, select Menu
ToolsSettingsConnectionPacket data
High speed packet access. Some cellular networks do
not allow incoming voice calls when HSDPA is active, in
which case you need to deactivate HSDPA to receive
calls. Contact your network operator for details.
For availability and subscription to data connection
services, contact your service provider.
HSDPA only affects the download speed; sending data
to the network, such as messages and e-mail, is not
affected.
Nokia PC Suite
You can install Nokia PC Suite from the CD-ROM or from
the web. Nokia PC Suite can be used with Windows
2000, Windows XP, and Windows Vista. With Nokia PC
Suite, you can make backups, synchronise your device
with a compatible computer, move files between your
device and a compatible computer, or use your device
as a modem.
For more information about Nokia PC Suite, see the
Nokia PC Suite guide.
Data cable
To avoid damaging the memory card, do not remove
the data cable in the middle of a data transfer.
Transfer data between your device and a PC
1. Insert a memory card to your device and connect
the device to a compatible PC with the USB data
cable.
2. When the device asks which mode is used, select
Mass storage. In this mode, you can see your
device as a removable hard drive in your computer.
Cyan Magenta Yellow Black
99
3. End the connection from the computer (for
example, from an Unplug or Eject Hardware wizard
in Windows) to avoid damaging the memory card.
To set the device to ask for the mode each time you
connect the USB data cable to the device, select
MenuConnectivityUSBUSB connection
modeAsk on connectionYes.
1. Ensure that the infrared ports of the devices face
each other. The positioning of the devices is more
important than the angle or distance.
2. Select MenuConnectivityInfrared to switch
on infrared on your device.
3. Switch on infrared on the other device and wait a
few seconds until the infrared connection is
established.
4. Locate the desired file in an application or File
manager, and select OptionsSendVia
infrared.
If the data transfer is not started within 1 minute after
the activation of the infrared port, the connection is
cancelled and must be started again.
All items received through infrared are placed in the
Inbox folder in Messaging.
Positioning the devices away from each other breaks
the connection, but the infrared light beam remains
active on your device until it deactivates.
Infrared
Bluetooth
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device
is a Class 1 laser product.
Use infrared to connect two devices and transfer data
between them. With infrared, you can transfer data
such as business cards, calendar notes, and media files
with a compatible device.
Select MenuConnectivityBluetooth.
To use Nokia PC Suite with your device, install Nokia PC
Suite on your PC, connect the data cable, and select PC
Suite.
To use your device to connect your PC to the web,
connect the data cable, and select Connect PC to Net.
To synchronise the music in your device with Nokia
Music Player, install the Nokia Music Player software on
your PC, connect the data cable, and select Media
transfer.
To change the USB mode you normally use with the
data cable, select MenuConnectivityUSB
USB connection mode and the desired option.
100
About Bluetooth
Bluetooth technology enables wireless connections
between electronic devices within a range of 10 metres
(33 feet). A Bluetooth connection can be used to send
images, videos, text, business cards, calendar notes, or
Cyan Magenta Yellow Black
to connect wirelessly to devices that use Bluetooth
technology.
Since devices using Bluetooth technology
communicate using radio waves, your device and the
other devices do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of
10 metres of each other, although the connection can
be subject to interference from obstructions such as
walls or other electronic devices.
Several Bluetooth connections can be active at a time.
For example, if your device is connected to a headset,
you can also transfer files to another compatible device
at the same time.
Features using Bluetooth technology increase the
demand on battery power and reduce the battery life.
Send and receive data with
Bluetooth
1. When you activate Bluetooth for the first time, you
are asked to give a name to your device. Give your
device a unique name to make it easy to recognise
if there are several Bluetooth devices in the vicinity.
2. Select BluetoothOn.
3. Select My phone's visibilityShown to all or
Define period. If you select Define period, you
need to define the time during which your device
is visible to others. Your device and the name you
entered can now be seen by other users with
devices using Bluetooth technology.
4. Open the application where the item you want to
send is stored.
5. Select the item, and select OptionsSendVia
Bluetooth. The device searches for other devices
using Bluetooth technology within range and lists
them.
Tip: If you have sent data using Bluetooth
before, a list of the previous search results is
displayed. To search for more Bluetooth
devices, select More devices.
6. Select the device with which you want to connect.
If the other device requires pairing before data can
be transmitted, you are asked to enter a passcode.
When the connection has been established, Sending
data is shown.
The Sent folder in the Messaging application does not
store messages sent using Bluetooth connectivity.
To receive data using Bluetooth, select Bluetooth
On and My phone's visibilityShown to all to
receive data from a non-paired device or Hidden to
receive data from a paired device only. When you
receive data through Bluetooth, a tone sounds, and you
are asked if you want to accept the message in which
the data is included. If you accept, the message is
placed in the Inbox folder in the Messaging application.
Tip: You can access the files in the device or on
the memory card using a compatible accessory
that supports the File Transfer Profile Client
service (for example, a laptop computer).
A Bluetooth connection is disconnected automatically
after sending or receiving data. Only Nokia PC Suite and
some enhancements such as headsets may maintain a
connection even if not actively used.
Cyan Magenta Yellow Black
101
Pair devices
Open the paired devices tab.
Before pairing, create your own passcode (1-16 digits),
and agree with the user of the other device to use the
same code. Devices that do not have a user interface
have a fixed passcode. You need the passcode only
when you connect the devices for the first time. After
pairing, it is possible to authorise the connection.
Pairing and authorising the connection makes
connecting quicker and easier, as you do not have to
accept the connection between paired devices every
time you establish a connection.
The passcode for remote SIM access must have 16
digits.
1. Select OptionsNew paired device. The device
starts to search for Bluetooth devices within range.
If you have sent data using Bluetooth before, a list
of the previous search results is displayed. To search
for more Bluetooth devices, select More devices.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes to make the connection between your
device and the other device automatic, or No to
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
OptionsAssign short name. The nickname is only
displayed in your device.
102
To delete a pairing, select the device whose pairing you
want to delete and OptionsDelete. To delete all
pairings, select OptionsDelete all. If you are
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select Set as authorised. Connections
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or computer,
or devices that belong to someone you trust. If you
want to accept connection requests from the other
device separately every time, select Set as
unauthorised.
To use a Bluetooth audio enhancement such as a
Bluetooth handsfree or headset, you need to pair your
device with the enhancement. See the enhancement
user guide for the passcode and further instructions.
To connect to the audio enhancement, switch on the
enhancement. Some audio enhancements connect
automatically to your device. Otherwise open the
paired devices tab, scroll to the enhancement, and
select OptionsConnect to audio device.
Security tips
When you are not using Bluetooth connectivity, select
BluetoothOff or My phone's visibility
Hidden.
Do not pair with an unknown device.
Cyan Magenta Yellow Black
SIM access profile
With the SIM access profile, you can access the SIM card
of your device from a compatible car kit device. This
way, you do not need a separate SIM card to access SIM
card data and connect to the GSM network.
To use the SIM access profile, you need the following:
ವ Compatible car kit device that supports Bluetooth
wireless technology
ವ Valid SIM card in your device
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
enhancement, such as a car kit, to make or receive calls.
Your wireless device will not make any calls, except to
the emergency numbers programmed into your device,
while in this mode. To make calls from your device, you
must first leave the remote SIM mode. If the device has
been locked, enter the lock code to unlock it first.
For more information about car kit devices and
compatibility with your device, see the Nokia web site
and your car kit user guide.
Use the SIM access profile
1. Select MenuConnectivityBluetooth
Remote SIM modeOn.
2. Activate Bluetooth in the car kit.
3. Use your car kit to start a search for compatible
devices. For instructions, see the user guide of your
car kit.
4. Select your device from the list of compatible
devices.
5. To pair the devices, enter the Bluetooth passcode
shown on the display of the car kit to your device.
Tip: If you have already accessed the SIM card
from the car kit with the active user profile, the
car kit searches automatically for a device with
the SIM card. If it finds your device, and
automatic authorisation is activated, the car kit
automatically connects to the GSM network
when you switch on the car ignition.
When you activate the remote SIM access profile, you
can use applications on your device that do not need
network or SIM services.
To make connections between your device and the car
kit without separate acceptance or authorisation,
select MenuConnectivityBluetooth, and open
the paired devices tab. Scroll to the car kit, press the
scroll key, and enter the Bluetooth passcode. When the
device asks to make the connection automatic, select
Yes. If you select No, connection requests from this car
kit must be accepted separately every time.
To end the remote SIM access connection from your
device, select MenuConnectivityBluetooth
Remote SIM modeOff.
Wireless LAN
Your device can detect and connect to a wireless local
area network (WLAN). To use WLAN, a network must be
available in the location and your device must be
connected to it.
Cyan Magenta Yellow Black
103
WLAN connections
104
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorised access to your data.
To use WLAN, you must create an internet access point
in a WLAN. Use the access point for applications that
need to connect to the internet. A WLAN connection is
established when you create a data connection using
a WLAN access point. The active WLAN connection is
ended when you end the data connection. You can also
end the connection manually. See "Connection
manager", p. 106.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one WLAN
access point device at a time, but several applications
can use the same internet access point.
When the device is in the Offline profile, you can still
use WLAN, if available. Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
If you move the device to another location within the
WLAN and out of range of a WLAN access point, the
roaming functionality can automatically connect your
device to another access point that belongs to the same
WLAN. As long as you remain within range of access
points that belong to the same network, your device
can stay connected to the network.
Tip: To check the unique media access control
(MAC) address that identifies your device, for
example to configure the MAC address of your
device to a WLAN router, enter *#62209526# on
the device keypad. The MAC address is shown on
the device display.
See WLAN availability
To have your device show WLAN availability, select
MenuToolsSettingsConnection
Wireless LANShow WLAN availability.
If WLAN is available,
is shown on the display.
Tip: You can also scan for networks in range.
WLAN wizard
Select MenuConnectivityWLAN wiz..
The WLAN wizard helps you find and connect to a
wireless LAN. When you open the application, your
device starts to scan for available WLANs and lists them.
To update the list of available WLANs, select Options
Refresh.
To start or continue browsing the web using the access
point of the WLAN, scroll to the desired network, and
select OptionsStart Web browsing or Cont. Web
browsing.
To disconnect the active connection to the WLAN, select
OptionsDisconnect WLAN.
To view the details of the WLAN, select Options
Details.
To save the access point of the WLAN, select Options
Define access point.
Cyan Magenta Yellow Black
Always enable one of the available encryption methods
to increase the security of your WLAN connection. Using
encryption reduces the risk of unauthorised access to
your data.
Use the wizard on the home screen
On the home screen, the WLAN wizard shows the status
of your WLAN connections and network searches. To
view the available options, scroll to the row showing
the status, and press the scroll key. Depending on the
status, you can start the Web browser using a WLAN
connection, connect to your net call service, disconnect
from a WLAN, search for WLANs, or set the network
scanning on or off.
If WLAN scanning is off and you are not connected to
any WLAN, WLAN scanning off is displayed on the
home screen. To set scanning on and search for
available WLANs, scroll to the row showing the status,
and press the scroll key.
To start a search for available WLANs, scroll to the row
showing the status, press
the scroll key, and select
Search for WLAN. To set
WLAN scanning off, scroll to
the row showing the status,
press the scroll key, and
select Switch WLAN scan
off.
When Start Web
browsing or Use for is
selected, the WLAN wizard
automatically creates an
access point for the selected
WLAN. The access point can also be used with other
applications requiring WLAN connection.
If you select a secured WLAN, you are asked to enter
the relevant passcodes. To connect to a hidden
network, you must enter the correct service set
identifier (SSID).
To use the found WLAN for a net call connection, scroll
to the row showing the status, and press the scroll key.
Select Use for, the desired net call service, and the
WLAN to be used.
Modem
Select MenuConnectivityModem.
Together with a compatible computer, you can use
your device as a modem to connect to the web, for
example.
Before you can use your device as a modem
ವ You need an appropriate data communications
software on your computer, such as Nokia PC Suite.
For more information, see the Nokia PC Suite guide.
ವ You must subscribe to the appropriate network
services from your service provider or internet
service provider.
ವ You must have the appropriate drivers installed on
your computer. You must install drivers for the cable
connection, and you may need to install or update
Bluetooth or infrared drivers.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared
Cyan Magenta Yellow Black
105
ports of the device and computer are directly facing
each other with no obstacles between them.
To connect your device to a computer using Bluetooth
wireless technology, initiate the connection from the
computer. To activate Bluetooth in your device, select
MenuConnectivityBluetooth and select
BluetoothOn.
If you use a cable to connect your device to a computer,
initiate the connection from the computer.
You may not be able to use some of the other
communication features when the device is used as a
modem.
Search for WLAN
To search for WLANs available within range, select
Available WLAN networks. The available WLANs are
listed with their network mode (infrastructure or adhoc), signal strength, and network encryption
indicators, and whether your device has an active
connection with the network.
To view the details of a network, scroll to it, and press
the scroll key.
To create an internet access point for a network, select
OptionsDefine access point.
Connection manager
Select MenuConnectivityConn. mgr..
View and end active
connections
To see the open data connections, select Active data
connections.
To view detailed information about network
connections, select a connection from the list and
OptionsDetails. The type of information shown
depends on the connection type.
To end the selected network connection, select
OptionsDisconnect.
106
To end all active network connections simultaneously,
select OptionsDisconnect all.
Cyan Magenta Yellow Black
Security and data management
Manage the data and software on your device, and take
care of the security of the device and its contents.
Important: Your device can only support one
antivirus application. Having more than one
application with antivirus functionality could affect
performance and operation or cause the device to stop
functioning.
Lock the device
Important: If the device has been locked, enter the
lock code to activate the phone function. When the
device is locked, calls may be possible to the official
emergency number. Making an emergency call in the
offline profile or when the device is locked requires
that the device recognise the number to be an official
emergency number. It is advisable to change the
profile or unlock the device by entering the lock code
before you make the emergency call.
To prevent access to the contents of your device, lock
the device when in home screen. Press the power key,
select Lock phone, and enter your lock code. The
default lock code is 12345. To unlock, press the left
selection key, enter your lock code, and press the scroll
key.
To change the lock code, select MenuTools
SettingsGeneralSecurityPhone and SIM
cardLock code. Enter the old code and then the
new code twice. The new code can be 4-255 characters
long. Both alphabets and digits can be used, and both
uppercase and lowercase alphabets are possible.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking and
to define the text for the message, select Menu
ToolsSettingsGeneralSecurityPhone
and SIM cardAllow remote lockYes. Enter the
remote lock message and confirm the message. The
message must be at least 5 characters long.
Memory card security
Select MenuToolsMemory.
You can protect a memory card with a password to
prevent unauthorised access. To set a password, select
OptionsSet password. The password can be up to
8 characters long and is case-sensitive. The password
is stored in your device. You do not need to enter it
again while you use the memory card on the same
device. If you use the memory card on another device,
you are asked for the password. Not all memory cards
support password protection.
Cyan Magenta Yellow Black
107
To remove the memory card password, select
OptionsRemove password. When you remove the
password, the data on the memory card is not
protected against unauthorised use.
To open a locked memory card, select Options
Unlock memory card. Enter the password.
If you cannot recall the password to unlock a locked
memory card, you may reformat the card, in which case
the card is unlocked and password removed.
Formatting a memory card destroys all data stored on
the card.
Encryption
Select MenuToolsEncryption.
Encrypt your device or memory card to prevent
outsiders from accessing your important information.
108
ವ Encrypt and save key — Encrypt the memory card
and save the key manually in the default folder. For
security, store the key to a safe place outside the
device. For example, you can send the key to your
computer. Enter a pass phrase for the key and a
name for the key file. The pass phrase should be long
and complex.
ವ Encrypt with restored key — Encrypt the memory
card with a key you have received. Select the key file,
and enter the pass phrase.
Decrypt device memory or
memory card
Always remember to decrypt the device memory and/
or the memory card before updating the device
software.
To decrypt the device memory, select Phone
memory.
Encrypt device memory or
memory card
To decrypt the memory card without destroying the
encryption key, select Memory cardDecrypt.
To encrypt the device memory, select Phone
memory.
To encrypt the memory card, select Memory card and
from the following:
ವ Encrypt without saving key — Encrypt the
memory card without saving the encryption key. If
you select this option, you cannot use the memory
card in other devices, and if you restore factory
settings, you cannot decrypt the memory card.
Fixed dialling
To decrypt the memory card and destroy the
encryption key, select Memory cardDecrypt and
turn off encryption.
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Cyan Magenta Yellow Black
Select MenuCommunic.ContactsOptions
SIM contactsFixed dial contacts.
With the fixed dialling service, you can restrict calls
from your device to certain phone numbers. Not all SIM
cards support the fixed dialling service. Contact your
service provider for more information.
When fixed dialling is activated, calls may be possible
to the official emergency number programmed into
your device.
1. To restrict calls from your device, select Options
New SIM contact and enter the contact name and
phone number to the list of numbers to which calls
are allowed, or select Add from Contacts to copy
the contact from Contacts. To restrict calls by a
country prefix, enter the country prefix in the list of
numbers. All phone numbers to which calls are
allowed must start with this country prefix.
2. Select OptionsActivate fixed dialling. You
need your PIN2 code to activate and deactivate
fixed dialling or edit your fixed dialling contacts.
Contact your service provider if you do not have the
code. To cancel the service, select Options
Deactivate fixed dialling.
Tip: To send text messages to the SIM contacts
while the fixed dialling service is active, you
need to add the text message centre number to
the fixed dialling list.
Certificate manager
Select MenuToolsSettingsGeneral
SecurityCertificate management.
Digital certificates are used to verify the origins of
software but do not guarantee safety. There are four
different types of certificates: authority certificates,
personal certificates, trusted site certificates, and
device certificates. During a secure connection, a server
may send a server certificate to your device. Upon
receipt, it is checked through an authority certificate
stored in your device. You receive notification if the
identity of the server is not authentic or if you do not
have the correct certificate in your device.
Download a certificate from a web site, or receive a
certificate as an e-mail attachment, or as a message
sent through a Bluetooth or infrared connection.
Certificates should be used when you connect to an
online bank or a remote server to transfer confidential
information. They should also be used if you want to
reduce the risk of viruses or other malicious software,
and to check the authenticity of software when you
download and install software to your device.
Tip: When you add a new certificate, check its
authenticity.
View certificate details
You can only be sure of the correct identity of a server
when the signature and the validity period of a server
certificate have been checked.
To view certificate details, select View details.
One of the following notes may appear:
ವ Certificate not trusted — You have not set any
application to use the certificate. You may want to
change the trust settings.
Cyan Magenta Yellow Black
109
ವ Expired certificate — The period of validity has
ended for the selected certificate.
ವ Certificate not valid yet — The period of validity
has not yet begun for the selected certificate.
ವ Certificate corrupted — The certificate cannot be
used. Contact the certificate issuer.
Certificate trust settings
Trusting a certificate means that you authorise it to
verify web pages, e-mail servers, software packages,
and other data. Only trusted certificates can be used to
verify services and software.
Important: Even if the use of certificates makes
the risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security.
The existence of a certificate does not offer any
protection by itself; the certificate manager must
contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a
restricted lifetime. If "Expired certificate" or "Certificate
not valid yet" is shown, even if the certificate should
be valid, check that the current date and time in your
device are correct.
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to the
listed owner.
110
To change the trust settings, select a certificate and
OptionsTrust settings. Select an application field
and press the scroll key to select Yes or No. You cannot
change the trust settings of a personal certificate.
Depending on the certificate, a list of applications that
can use the certificate is displayed:
ವ Symbian installation — New Symbian operating
system application.
ವ Internet — E-mail and graphics.
ವ App. installation — New Java™ application.
ವ Online certif. check — Online certificate status
protocol.
Security modules
This option depends on availability from the operator.
Consult your operator to verify the availability of this
option in your network.
Select MenuToolsSettingsGeneral
SecuritySecurity module.
View and edit security
modules
To view or edit a security module, scroll to it, and press
the scroll key.
To view detailed information about a security module,
select OptionsSecurity details.
To edit the PIN codes for the security module, select
Module PIN to edit the PIN code for the security
module or Signing PIN to edit the PIN code for digital
signatures. You may not be able to change these codes
for all security modules.
Cyan Magenta Yellow Black
The key store contains the contents of the security
module. To delete the key store, select Key store,
select the desired key store, and OptionsDelete.
You may not be able to delete the key store of all
security modules.
Back up data
It is recommended to back up device memory regularly
to the memory card or a compatible computer.
To back up information from the device memory to a
memory card, select MenuToolsMemory
OptionsBack up phone memory.
To restore information from the memory card to the
device memory, select MenuToolsMemory
OptionsRestore from card.
You can also connect your device to a compatible
computer and use Nokia PC Suite to back up data.
Remote configuration
Select MenuToolsDevice mgr..
With Device manager, you can manage settings, data,
and software on your device remotely.
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles
and different configuration settings from your service
providers or company information management
department. Configuration settings may include
connection and other settings used by different
applications in your device. The available options may
vary.
The remote configuration connection is usually started
by the server when the device settings need to be
updated.
To create a new server profile, select OptionsNew
server profile.
You may receive these settings from your service
provider in a configuration message. If not, define the
following:
ವ Server name — Enter a name for the configuration
server.
ವ Server ID — Enter the unique ID to identify the
configuration server.
ವ Server password — Enter a password to identify
your device to the server.
ವ Session mode — Select the preferred connection
type.
ವ Access point — Select the access point to use for
the connection, or create a new access point. You
can also choose to be asked for the access point
every time you start a connection.
ವ Host address — Enter the web address of the
configuration server.
ವ Port — Enter the port number of the server.
ವ User name — Enter your user ID for the
configuration server.
ವ Password — Enter your password for the
configuration server.
ವ Allow configuration — Select Yes to allow the
server to initiate a configuration session.
Cyan Magenta Yellow Black
111
ವ Auto-accept all requests — Select Yes if you do
not want the server to ask for your confirmation
when it initiates a configuration session.
ವ Network authentication — Select whether to use
http authentication. This setting is available only if
you have selected internet as the bearer type.
ವ Network user name — Enter your user ID for the
http authentication. This setting is available only if
you have selected internet as the bearer type.
ವ Network password — Enter your password for the
http authentication. This setting is available only if
you have selected internet as the bearer type.
To connect to the server and receive configuration
settings for your device, select OptionsStart
configuration.
To view the configuration log of the selected profile,
select OptionsView log.
Application manager
112
Select MenuInstallationsApp. mgr..
You can install two types of applications and software
on your device:
ವ Applications and software specifically intended for
your device or compatible with the Symbian
operating system. These software installation files
have the extension .sis or .sisx.
ವ Java ME™ applications compatible with the Symbian
operating system. The Java application installation
file extensions are .jad or .jar.
Installation files may be transferred to your device
from a compatible computer, downloaded during
browsing, or sent to you in a multimedia message, as
an e-mail attachment, or with Bluetooth.
During the installation, the device checks the integrity
of the package to be installed. The device shows
information about the checks being carried out, and
you are given options to continue or cancel the
installation.
If you install applications that require a network
connection, note that the power consumption of your
device may increase when you use these applications.
Tip: When browsing web pages, you can
download an installation file and install it
immediately. Note, however, that the
connection runs in the background during the
installation.
Install applications
Important: Only install and use applications and
other software from trusted sources, such as
applications that are Symbian Signed or have passed
the Java Verified™ testing.
To download and install software from the web, select
Download applications. Select the application and
OptionsInstall.
To view the details of an installed software package,
select the application and OptionsView details.
To view the installation log, select OptionsView
log. A list shows what software has been installed and
Cyan Magenta Yellow Black
removed, and the date of the installation or removal.
If you encounter problems with the device after
installing a software package, use this list to find out
which software package may be the cause of the
problem. The information in this list may also help you
pinpoint problems that are caused by software
packages that are incompatible with each other.
To remove software, select OptionsRemove. If you
remove software, you can only reinstall it by using the
original software package file, or by restoring a full
backup that contains the removed software package.
If you remove a software package, you may no longer
be able to open files created with that software. If
another software package depends on the software
package that you removed, the other software package
may stop working. Refer to the documentation of the
installed software package for details.
Installation settings
To modify the installation settings, select Options
Settings and from the following:
ವ Delete — The software package installation file is
deleted from the device after the installation. If you
download software packages using the Web
browser, this may help reduce the amount of
storage space required. If you want to store the
software package file for possible reinstallation, do
not select this option, or make sure that you have a
copy of the software package file stored on a
compatible computer or on a CD-ROM.
ವ Select language: — If the software package
contains several language versions of the software,
select the language version that you want to install.
ವ Type — Specify what kind of applications you want
installed. You may choose to install only
applications with validated certificates. This setting
applies only to Symbian operating system
applications (.sis or .sisx files).
Java security settings
To specify security settings for a Java application, select
OptionsSettings.
You can define which functions the Java application can
access. The value that you can set for each functionality
depends on the protection domain of the software
package.
ವ Access point — Select an access point that the
application may use when making network
connections.
ವ Network access — Allow the application to create
a data connection to the network.
ವ Messaging — Allow the application to send
messages.
ವ Application auto-start — Allow the application to
start automatically.
ವ Connectivity — Allow the application to activate a
data connection, such as a Bluetooth connection.
ವ Multimedia — Allow the application to use the
multimedia features of your device.
ವ Read user data — Allow the application to read
your calendar entries, contacts, or any other
personal data.
ವ Edit user data — Allow the application to add
personal data, such as entries to Contacts.
ವ Positioning — Allow the application to use the
location data in your device.
Cyan Magenta Yellow Black
113
ವ Landmarks — Allow the application to use the
landmarks in your device.
You can define how you are prompted to confirm the
Java application's access to the device functions. Select
one of the following values:
ವ Ask every time — Require the Java application to
ask for your confirmation each time it uses the
functionality.
ವ Ask first time — Require the Java application to ask
for initial confirmation to use the functionality.
ವ Always allowed — Allow the Java application to
use the functionality without your confirmation.
The security settings help protect your device
against harmful Java applications that may use the
functions of your device without your permission.
Only select Always allowed if you know the
supplier and trustworthiness of the application.
ವ Not allowed — Prevent the Java application from
using the functionality.
Activation keys
114
Select MenuToolsActv. keys.
Some media files, such as images, music, or video clips,
are protected by digital usage rights. The activation
keys for such files may allow or restrict their usage. For
example, with some activation keys you may listen to
a music track only a limited number of times. During
one playback session you may rewind, fast-forward, or
pause the track, but once you stop it, you have used
one of the instances allowed.
Use activation keys
Digital rights management (DRM) protected content
comes with an associated activation key that defines
your rights to use the content.
If your device has OMA DRM-protected content, to back
up both the activation keys and the content, use the
backup feature of Nokia PC Suite. Other transfer
methods may not transfer the activation keys which
need to be restored with the content for you to be able
to continue the use of OMA DRM-protected content
after the device memory is formatted. You may also
need to restore the activation keys in case the files on
your device get corrupted.
If your device has WMDRM-protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation
keys and the content if the files on your device get
corrupted. Losing the activation keys or the content
may limit your ability to use the same content on your
device again. For more information, contact your
service provider.
Some activation keys may be connected to a specific
SIM card, and the protected content can be accessed
only if the SIM card is inserted in the device.
To view your activation keys by type, select Valid
keys, Invalid keys, or Not in use.
To view the key details, select OptionsKey
details.
The following details are displayed for each media file:
Cyan Magenta Yellow Black
ವ Status — The status is Activation key is valid,
Activation key expired, or Activation key not yet
valid.
ವ Content sending — Allowed means that you can
send the file to another device. Not allowed means
that you cannot send the file to another device.
ವ Content in phone — Yes means that the file is in
the device and the path of the file is displayed. No
means that the related file is not currently in the
device.
To activate a key, go to the Activation keys main view,
and select Invalid keysOptionsGet activation
key. Establish a network connection at the prompt, and
you are directed to a web site where you can purchase
rights to the media.
To remove file rights, open the valid keys tab or the
keys not in use tab, scroll to the desired file, and select
OptionsDelete. If there are several rights related
to the same media file, all the rights are deleted.
The group key view displays all of the files related to a
group right. If you have downloaded multiple media
files with the same rights, they are all displayed in this
view. You can open the group view from either the valid
keys or invalid keys tabs. To access these files, open the
group rights folder.
Data synchronisation
Note: This function is not available in all countries
or regions. Consult with your local network operator
for availability of this function.
Select MenuToolsSync.
With Sync, you can synchronise your contacts, calendar
entries, or notes with corresponding applications on a
compatible computer or remote internet server. Your
synchronisation settings are saved in a
synchronisation profile. The Sync application uses
SyncML technology for remote synchronisation. For
information on SyncML compatibility, contact the
supplier of the applications with which you want to
synchronise your device.
You may receive the synchronisation settings as a
message from your service provider. The available
applications you can synchronise may vary. Contact
your service provider for more information.
Create a synchronisation
profile
There is a Nokia PC Suite synchronisation profile
available in your device. You do not need to edit it if
you synchronise your device with a computer using
Nokia PC Suite.
To create a new profile, select OptionsNew sync
profile and assign a name for the profile, select the
Cyan Magenta Yellow Black
115
applications to synchronise with the profile, and
specify the needed connection settings. Contact your
service provider for details.
Select applications to
synchronise
1. To select the applications to synchronise with a
synchronisation profile, select OptionsEdit
sync profileApplications.
2. Select the desired application, and select Include
in syncYes.
3. Specify the Remote database and
Synchronisation type settings.
Synchronisation connection
settings
116
To define the connection settings of a new profile,
select New sync profileConnection settings and
define the following settings:
ವ Server version — Select the SyncML version you can
use with the remote server.
ವ Server ID — Enter the server ID of the remote server.
This setting is only available if you select 1.2 as the
SyncML version.
ವ Data bearer — Select the data bearer to connect to
the remote server during synchronisation.
ವ Access point — Select the access point to use for
the synchronisation connection, or create a new
ವ
ವ
ವ
ವ
ವ
ವ
ವ
access point. You can also choose to be asked for the
access point every time you start synchronising.
Host address — Enter the web address of the server
that contains the database with which you want to
synchronise your device.
Port — Enter the port number of the remote
database server.
User name — Enter your user name to identify your
device to the server.
Password — Enter your password to identify your
device to the server.
Allow sync requests — To allow synchronisation
to start from the remote database server, select
Yes.
Accept all sync requests — To have your device ask
for your confirmation before accepting
synchronisation from the server, select No.
Network authentication — To authenticate your
device to the network before synchronisation, select
Yes. Enter your network user name and network
password.
Mobile VPN
Select MenuToolsSettingsConnection
VPN.
The Nokia mobile virtual private network (VPN) client
creates a secure connection to compatible corporate
intranet and services, such as e-mail. Your device
connects from a mobile network, through the internet,
to a corporate VPN gateway that acts as a front door to
the compatible corporate network. VPN client uses IP
Security (IPSec) technology. IPSec is a framework of
Cyan Magenta Yellow Black
open standards for supporting secure exchange of data
over IP networks.
VPN policies define the method used by the VPN client
and a VPN gateway to authenticate each other, and the
encryption algorithms that they use to help protect the
confidentiality of data. Contact your company's IT
department for a VPN policy.
To install and configure the VPN client, certificates, and
policies, contact the IT administrator of your
organisation.
Manage VPN
Select VPN, and from the following:
ವ VPN policies — Install, view, and update VPN
policies.
ವ VPN policy servers — Edit the connection settings
of VPN policy servers from which you can install and
update VPN policies. A policy server refers to a Nokia
Security Service Manager (NSSM), which is not
necessarily required.
ವ VPN log — View the log for your VPN policy
installations, updates and synchronisations, and
other VPN connections.
Create VPN access points
Select SettingsConnectionDestinations.
An access point is where your phone connects to the
network by way of WLAN or packet data connection. To
use e-mail and multimedia services or to browse web
pages you must first define internet access points for
these services. VPN access points pair VPN policies with
regular internet access points to create secure
connections.
Your service provider may preset some or all access
points for your device, and you may not be able to
create, edit, or remove them.
Contact your company's IT department for the correct
settings.
Open a destination, select a VPN access point, select
Edit, and define the following:
ವ Connection name — Enter a name for the VPN
access point.
ವ VPN policy — Select the VPN policy to combine with
the internet access point.
ವ Internet access point — Select the internet access
point with which to combine the VPN policy to
create secure connections for data transfer.
ವ Proxy server address — Enter the proxy server
address of the private network.
ವ Proxy port number — Enter the proxy port
number.
Use a VPN connection in an
application
You may have to prove your identity when you log on
to the enterprise network. Contact your company's IT
department for the credentials.
To use a VPN connection in an application, the
application must be associated with a VPN access point.
Tip: You can configure the application's
connection setting to Always ask, in which case
Cyan Magenta Yellow Black
117
you select the VPN access point from a list of
connections when a connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your
VPN user name and passcode or password. If the
SecurID token has become out of synchronisation
with the clock of the ACE/Server, enter the next
passcode. If you are using certificate-based
authentication, you may have to enter the key store
password.
Barcode reader
Select MenuToolsBarcode.
Use the Barcode reader application to decode different
types of barcodes. The codes may contain information
such as URL links, e-mail addresses, and phone
numbers. The Barcode reader uses the camera in your
device to scan codes.
To scan a code, select Scan code, and set the code
between the red lines on the display. The decoded
information appears on the display.
To save the scanned data, select OptionsSave. The
data is saved in .bcr format.
To view previously saved, decoded information in the
main view, select Saved data.
118
Cyan Magenta Yellow Black
Settings
Select MenuToolsSettings.
You can define and modify various settings of your
device. Modifying these settings affects the operation
of your device across several applications.
Some settings may be preset for the device or sent to
you in a special message by your service provider. You
may not be able to change such settings.
Select the setting you want to edit to do the following:
ವ Switch between two values, such as on or off.
ವ Select a value from a list.
ವ Open a text editor to enter a value.
ವ Open a slider to decrease or increase the value by
scrolling left or right.
General settings
Select MenuToolsSettingsGeneral.
Select from the following:
ವ Personalisation — Change the display settings and
personalise the device.
ವ Date and time — Change the date and time.
ವ Slide handling — Change the slide settings.
ವ Enhancement — Define the settings for your
enhancements.
ವ Security — Define the security settings.
ವ Factory settings — Restore the original settings of
the device.
ವ Positioning — Define the positioning method and
server for GPS-based applications.
Personalisation settings
Select MenuToolsSettingsGeneral
Personalisation.
Display settings
To turn the automatic display rotation on or off, select
DisplayDisplay rotation.
To select whether you want the image to change to full
screen in the landscape mode, select DisplayTurn
to full view.
To define the level of light that the device needs before
switching on the backlight, select DisplayLight
sensor.
To change the text size, select DisplayFont size.
To adjust the length of time the display can be left idle
before the screen saver is activated, select Display
Power saver time-out.
Cyan Magenta Yellow Black
119
To select a welcome note or logo for the display, select
DisplayWelcome note / logo. You can either
choose the default welcome note, enter your own text,
or select an image.
To set how quickly the display dims after the last
keypress, select DisplayLight time-out.
Standby mode settings
To set the various alert tones, select TonesMessage
alert tone, E-mail alert tone, Calendar alarm tone,
or Clock alarm tone.
To set the device to vibrate when you receive a call,
select TonesVibrating alert.
To select whether to use the home screen, select Home
screenHome screen.
To set the volume level of the device keypad tones,
select TonesKeypad tones.
To change the home screen mode settings, select
Home screenMode settings.
To set the warning tones on or off, select Tones
Warning tones.
To assign shortcuts for the device keys, select Home
screenKey shortcuts. These shortcuts are not
available in the home screen.
To select whether you want the alarms and incoming
calls to be silenced when you turn the device face
down, select Turn to silence.
To select whether to show or hide the operator logo,
select Home screenOperator logoOn or Off.
To select whether you want the alarms and incoming
calls to be silenced when you tap the device twice,
select Tap to silence.
To select the mailbox that is shown in the home screen,
select Home screenHome screen mailbox.
Tone settings
To select a ringing tone for voice calls, select Tones
Ringing tone.
To select a ringing tone for video calls, select Tones
Video call tone.
120
To set the volume level of the ringing tone, select
TonesRinging volume.
To set the ringing type, select TonesRinging
type. You can also set the device to sound a ringing
tone that is a combination of the spoken name of the
caller and the selected ringing tone, when someone
from your contacts list calls you. Select TonesSay
caller's name.
Language settings
To set the language used on the device display, select
LanguagePhone language.
To select the language in which you write notes and
messages, select LanguageWriting language.
To select whether to use the predictive text input,
select LanguagePredictive text.
Notification light
When you receive a message or miss a call, the scroll
key starts blinking to indicate the event.
Cyan Magenta Yellow Black
To set the length of time you want the scroll key to
blink, select Notification lightBlink light for.
To define the clock type, select Clock type
Analogue or Digital.
To select of which events you want to be notified, select
Notification lightNotified events.
To select the tone for the alarm clock, select Clock
alarm tone.
Settings for One-touch keys
To determine the week days that are work days for you,
select Workdays.
Select MenuToolsSettingsGeneral
PersonalisationOne-touch keys.
To select which application and task is opened when
you press a One-touch key, select the key and
OptionsOpen.
To restore the preset applications and tasks, select
Restore defaults.
Date and time settings
Slide settings
Select MenuToolsSettingsGeneralSlide
handling.
To select whether you want to answer a call by opening
the slide, select Opening the slide.
To select whether you want to end a call by closing the
slide, select Closing the slide.
Select MenuToolsSettingsGeneralDate
and time.
To select whether you want to lock the keypad when
you close the slide, select Keyguard activation.
To set the current date and time, select Date and
Time.
Enhancement settings
To define your time zone, select Time zone.
To update the time, date, and time zone information
automatically (network service), select Network
operator timeAuto-update.
To select whether to use the 12-hour or 24-hour clock
system and with which symbol to separate hours and
minutes, select Time format and Time separator.
To determine the date format and separator, select
Date format and Date separator.
Select MenuToolsSettingsGeneral
Enhancement.
Common enhancement settings
With most enhancements, you can do the following:
To determine which profile is activated when you
attach an enhancement to your device, select Default
profile.
To let the device answer phone calls automatically after
5 seconds when an enhancement is attached, select
Automatic answerOn. If the ringing type is set to
Cyan Magenta Yellow Black
121
Beep once or Silent in the selected profile, the
automatic answer is disabled.
To illuminate the device while it is attached to an
enhancement, select LightsOn.
E-mail key settings
To select which mailbox to open with the e-mail key,
select E-mail key settingsE-mail key, and press
the scroll key.
Security settings
Select MenuToolsSettingsGeneral
Security.
Define the following security settings:
ವ Phone and SIM card — Adjust the security settings
for your device and SIM card.
ವ Certificate management — Manage your security
certificates.
ವ Security module — Manage your security module.
Avoid using codes that are similar to emergency
numbers to prevent accidental dialling of the
emergency number. Codes are shown as asterisks.
When you change a code, enter the current code, then
the new code twice.
Device and SIM card security
122
To change the PIN code, select Phone and SIM card
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised
use and is provided with the SIM card. After three
consecutive incorrect PIN code entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can use the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM cardKeypad
autolock period.
To set a time-out after which the device is
automatically locked and can be used only if the correct
lock code is entered, select Phone and SIM card
Phone autolock period. Enter a number for the timeout in minutes, or select None to set off the autolock
period. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the
official emergency number programmed into your
device.
To set a new lock code, select Phone and SIM card
Lock code. The preset lock code is 12345. Enter the
current code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and
digits can be used, and both uppercase and lowercase
alphabets are possible. The device notifies you if the
lock code is not properly formatted.
Restore original settings
To restore the original device settings, select Factory
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
power on. Documents, contact information, calendar
entries, and files are unaffected.
Cyan Magenta Yellow Black
Telephone settings
Select MenuToolsSettingsPhone.
Select from the following:
ವ Call — Define general call settings.
ವ Call divert — Define your call divert settings. See
"Call divert", p. 77.
ವ Call barring — Define your call barring settings. See
"Call barring", p. 77.
ವ Network — Adjust the network settings.
Call settings
To display your phone number to the person you are
calling, select CallSend my caller IDYes. To let
the network determine whether your caller ID is sent,
select Set by network.
To display your net call address to the person you are
calling using a net call, select CallSend my internet
call IDYes.
To be notified of a new incoming call while you have a
call in progress, select CallCall waiting
OptionsActivate. To check if the function is active
on the network, select OptionsCheck status.
To select whether net calls alert or not, select Call
Internet call alert. You are notified of missed net calls
with a notification.
To set the default call type, select CallDefault call
type and select Voice call if you make a GSM calls, or
Internet call if you make net calls.
To send a text message automatically to the person
who is calling you informing why you cannot answer
the incoming call, select CallReject call with
SMSYes. To set the text for the message, select
CallMessage text.
To set off the contact search on the home screen, select
CallContact searchOff.
Network settings
Select MenuToolsSettingsPhone
Network.
To select the network mode, select Network mode
and Dual mode, UMTS, or GSM. In the dual mode, the
device switches automatically between networks.
Tip: UMTS enables faster data transfer, but may
increase the demand on battery power and
reduce the battery life. In regions close to both
GSM and UMTS networks, selecting Dual mode
may cause constant jumping between the two
networks, which also increases the demand on
battery power.
To select the operator, select Operator selection and
Manual to choose from available networks, or
Automatic to have the device select the network
automatically.
To set the device to indicate when it is used in Micro
Cellular Network (MCN), select Cell info display
On.
Cyan Magenta Yellow Black
123
Connection settings
Select MenuToolsSettingsConnection.
Select from the following:
ವ Bluetooth — Edit the Bluetooth settings. See "Send
and receive data with Bluetooth", p. 101.
ವ USB — Edit the data cable settings. See "Data
cable", p. 99.
ವ Access points — Set up new or edit existing access
points. Some or all access points may be preset for
your device by your service provider, and you may
not be able to create, edit, or remove them.
ವ Packet data — Determine when packet data
connections are used, and enter the access point if
you use your device as a modem for a computer.
ವ Wireless LAN — Determine if the device displays an
indicator when a WLAN is available, and how often
the device searches for networks.
ವ SIP settings — View or create session initiation
protocol (SIP) profiles.
ವ Internet tel. — Define settings for net calls.
ವ Configurations — View and delete trusted servers
from which your device may receive configuration
settings.
ವ APN control — Restrict packet data connections.
See "Restrict packet data", p. 129.
Access points
124
Select MenuToolsSettingsConnection
Access points.
An internet access point is a collection of settings,
which define how the device creates a data connection
to the network. To use e-mail and multimedia services
or to browse web pages, you must first define access
points for these services.
Some or all access points may be preset for your device
by your service provider, and you may not be able to
create, edit, or remove them.
To create a new access point, select OptionsNew
access point or select an existing access point from the
list and then OptionsDuplicate access point to use
the access point as a basis for the new one.
Packet data (GPRS) settings
Select MenuToolsSettingsConnection
Packet data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your
device in GSM and UMTS networks, it is possible to have
multiple data connections active at the same time;
access points can share a data connection, and data
connections remain active, for example, during voice
calls. See "Connection manager", p. 106.
To define the packet data settings, select Packet data
connection and select When available to register the
device to the packet data network when you switch the
device on in a supported network, or When needed to
establish a packet data connection only when an
application or action requires it. Select Access point
and enter the access point name provided by your
service provider to use the device as a packet data
modem to your computer. To use a high-speed data
connection, select High speed packet access
Enabled.
Cyan Magenta Yellow Black
These settings affect all access points for packet data
connections.
WLAN settings
Select MenuToolsSettingsConnection
Wireless LAN.
To have an indicator displayed when there is a WLAN
available in your current location, select Show WLAN
availabilityYes.
To select the interval for your device to scan for
available WLANs and update the indicator, select Scan
for networks. This setting is not available unless you
select Show WLAN availabilityYes.
Advanced WLAN settings
Select OptionsAdvanced settings. The advanced
WLAN settings are normally defined automatically, and
changing them is not recommended.
To edit the settings manually, select Automatic
configurationDisabled, and define the following:
ವ Long retry limit — Enter the maximum number of
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
ವ Short retry limit — Enter the maximum number of
transmission attempts if the device does not receive
a clear-to-send signal from the network.
ವ RTS threshold — Select the data packet size at
which the WLAN access point device issues a request
to send before sending the packet.
ವ TX power level — Select the power level of your
device when sending data.
ವ Radio measurements — Enable or disable the
radio measurements.
ವ Power saving — Select whether to use the WLAN
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
OptionsRestore defaults.
WLAN security settings
Select MenuToolsSettingsConnection
Access pointsOptionsNew access point, or
select an access point and OptionsEdit.
In the access point settings, select WLAN security
mode and the desired mode.
WEP security settings
Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When the WEP security mode is in
use, and your device receives a data packet not
encrypted with the WEP keys, the data is discarded.
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settings and from the following:
Cyan Magenta Yellow Black
125
ವ WEP key in use — Select the desired WEP key.
ವ Authentication type — Select Open or Shared.
ವ WEP key settings — Edit the settings for the WEP
key.
ವ Pre-shared key — If you selected WPA/WPA2
Pre-shared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
WEP key settings
WPA security settings
In an ad-hoc network, all devices must use the same
WEP key.
Select WLAN security settingsWEP key settings
and from the following:
ವ WEP encryption — Select the desired WEP
encryption key length.
ವ WEP key format — Select whether you want to
enter the WEP key data in ASCII or Hexadecimal
format.
ವ WEP key — Enter the WEP key data.
Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings and from the following:
ವ WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared key (a
secret key used for device identification).
ವ EAP plug-in settings — If you select WPA/WPA2
EAP, select which EAP plug-ins defined in your
device to use with the access point.
ವ Pre-shared key — If you select WPA/WPA2Preshared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
ವ WPA2 only mode — To allow both TKIP and AES
(Advanced Encryption Standard) encryption, select
Off. To allow AES only, select On
802.1x security settings
126
Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access
a wireless network, and prevents access if the
authorisation process fails.
Select WLAN security settings and from the following:
ವ WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared key (a
secret key used for device identification).
ವ EAP plug-in settings — If you selected WPA/
WPA2EAP, select which EAP plug-ins defined in
your device to use with the access point.
Wireless LAN plugins
Select MenuToolsSettingsConnection
Access points.
The EAP (extensible authentication protocol) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
Cyan Magenta Yellow Black
You can view the EAP plug-ins currently installed in
your device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select Options
New access point and define an access point that
uses WLAN as a data bearer.
2. Select 802.1x or WPA/WPA2 as the security mode.
3. Select WLAN security settingsWPA/WPA2
EAPEAP plug-in settings.
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
OptionsEnable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select OptionsDisable.
To edit the EAP plug-in settings, select Options
Edit.
To change the priority of the EAP plug-in settings, select
OptionsRaise priority to attempt to use the plugin before other plug-ins when connecting to the
network with the access point, or OptionsLower
priority to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select MenuToolsSettingsConnection
SIP settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
To create a SIP profile, select OptionsNew SIP
profileUse default profile or Use existing
profile.
To select the SIP profile you want to use by default for
communication sessions, select OptionsDefault
profile.
Edit SIP profiles
Select OptionsEdit, and select from the following:
ವ Profile name — Enter a name for the SIP profile.
ವ Service profile — Select IETF or Nokia 3GPP.
ವ Default access point — Select the access point to
use for the internet connection.
ವ Public user name — Enter your user name received
from your service provider.
ವ Use compression — Select if compression is used.
ವ Registration — Select the registration mode.
ವ Use security — Select if security negotiation is
used.
Cyan Magenta Yellow Black
127
ವ Proxy server — Enter the proxy server settings for
this SIP profile.
ವ Registrar server — Enter the registration server
settings for this SIP profile.
Edit SIP proxy servers
Select OptionsNew SIP profile or EditProxy
server.
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional
security and speed up access to the service.
Select from the following:
ವ Proxy server address — Enter the host name or IP
address of the proxy server in use.
ವ Realm — Enter the proxy server realm.
ವ User name and Password — Enter your user name
and password for the proxy server.
ವ Allow loose routing — Select if loose routing is
allowed.
ವ Transport type — Select UDP, Auto, or TCP.
ವ Port — Enter the port number of the proxy server.
Edit registration servers
128
Select OptionsNew SIP profile or EditRegistrar
server.
Select from the following:
ವ Registrar server address — Enter the host name
or IP address of the registrar server in use.
ವ Realm — Enter the registrar server realm.
ವ User name and Password — Enter your user name
and password for the registrar server.
ವ Transport type — Select UDP, Auto, or TCP.
ವ Port — Enter the port number of the registrar
server.
Net call settings
Select MenuToolsSettingsConnection
Internet tel..
To create a new net call profile, select OptionsNew
profile.
To edit an existing profile, select OptionsEdit.
Configuration settings
Select MenuToolsSettingsConnection
Configurations.
You can receive messages from your service provider
or company information management containing
configuration settings for trusted servers. These
settings are automatically saved in Configurations.
You may receive configuration settings for access
points, multimedia, or e-mail services, and IM or
synchronisation settings from trusted servers.
To delete configurations for a trusted server, select
OptionsDelete. The configuration settings for
other applications provided by this server are also
deleted.
Cyan Magenta Yellow Black
Restrict packet data
Select MenuToolsSettingsConnection
APN control.
With the access point control service, you can restrict
packet data connections from your device to certain
access points only. Your SIM card may not support the
access point control service. Contact your service
provider for more information.
To restrict the packet data connections from your
device, select OptionsActivate restrictions. You
need your PIN2 code to activate and deactivate access
point control or to edit the packet data access points
on the control list.
To add access points that can be used for packet data
connections to the control list, select OptionsAdd
name manually. To enable connections to an
operator-provided access point, create an empty
access point.
To remove access points from the list, select Options
Remove.
Application settings
Select MenuToolsSettingsApplications.
Select an application from the list to adjust its settings.
129
Cyan Magenta Yellow Black
Shortcuts
Here are some of the available keyboard shortcuts in
your device. Shortcuts can make the use of the
applications more efficient.
General shortcuts
General shortcuts
Power key
Press and hold to switch your device
on and off.
Press once to switch between
profiles.
Home screen
130
Left selection
key + *
Lock and unlock the keypad.
Call key
Open the call log.
Press and hold to open your home
page in the Web browser.
Press and hold to switch between
the Silent and General profiles.
The availability of this option
depends on the network operator.
Please check with network operator
for this option availability.
Press and hold to call your voice
mailbox.
Number key (2– Call a phone number using speed
9)
dialling. You must first activate
speed dialling at MenuTools
SettingsPhoneCall
Speed diallingOn.
Web
Zoom in the page.
Zoom out the page.
Open the search dialog.
View the active pages.
View the page overview.
Open the dialog for entering a new
web address.
Open the bookmarks folder.
Image viewer
Call key
Send the image.
Cyan Magenta Yellow Black
0
Zoom out.
Zoom in.
Zoom in. Press twice for the full
screen size.
Scroll left in the zoomed image.
Scroll right in the zoomed image.
Scroll up in the zoomed image.
Scroll down in the zoomed image.
Rotate clockwise.
Rotate counterclockwise.
Switch between the full screen size
and normal view.
131
Cyan Magenta Yellow Black
Glossary
Glossary
3G
Ad-hoc
operating
mode
Cookies
DNS
132
3rd generation mobile
communications. A digital system for
mobile communications which aims at
global use and provides increased
bandwidth. 3G lets a mobile device
user access a wide variety of services,
such as multimedia.
A WLAN network mode where two or
more devices connect to each other
using WLAN directly without a WLAN
access point.
Cookies are little pieces of information,
given by the server to you, to store
information about your visits to a web
site. When you accept cookies, the
server is able to evaluate your use of
the web site, what you are interested
in, what you want to read, and so on.
Domain name service. An internet
service that translates domain names
such as www.nokia.com into IP
addresses such as 192.100.124.195.
Domain names are easier to remember
but this translation is needed because
the internet is based on IP addresses.
DTMF tones
Dual Tone Multi-Frequency tones. The
DTMF system is used by touch-tone
telephones. DTMF assigns a specific
frequency, or tone, to each key so that
it can easily be identified by a
microprocessor. DTMF tones allow you
to communicate with voice mailboxes,
computerised telephony systems, and
so on.
EAP
Extensible authentication protocol.
EAP plug-ins are used in wireless
networks to authenticate wireless
devices and authentication servers.
EGPRS
Enhanced GPRS. EGPRS is similar to
GPRS, but it enables faster connection.
For more information on the
availability of EGPRS and data transfer
speed, contact your service provider.
Cyan Magenta Yellow Black
GPRS
General packet radio service. GPRS
enables wireless access for mobile
phones to data networks (network
service). GPRS uses packet data
technology where information is sent
in short bursts of data over the mobile
network. The benefit of sending data
in packets is that the network is
occupied only when sending or
receiving data. As GPRS uses the
network efficiently, it allows for quick
data connection setup and fast data
transmission speeds.
You must subscribe to the GPRS service.
For availability and subscription to
GPRS, contact your service provider.
During a voice call, you cannot
establish a GPRS connection, and any
existing GPRS connection is put on hold
unless the network supports dual
transfer mode.
GPS
Global positioning system. GPS is a
worldwide radio navigation system.
HSDPA
High-speed downlink packet access.
HSDPA brings high-speed data delivery
to 3G terminals, ensuring that users
requiring effective multimedia
capabilities benefit from data rates
previously unavailable because of
limitations in the radio access network.
HTTP
Hypertext transfer protocol. A
document transfer protocol used in the
web.
HTTPS
HTTP over a secure connection.
IMAP4
Internet mail access protocol, version
4. A protocol used for accessing your
remote mailbox.
Internet
An access point is where your device
access point connects to a network. To use e-mail
and multimedia services or to connect
to the internet and browse web pages,
you must first define internet access
points for these services.
Infrastructur A WLAN network mode where devices
e operating are connected to WLAN using a WLAN
mode
access point.
PIN
Personal identity number. The PIN
code protects your device from
unauthorised use. The PIN code is
supplied with the SIM card. If the PIN
code request is selected, the code is
required each time the device is
switched on. The PIN code must be 4 to
8 digits long.
PIN2
The PIN2 code is supplied with some
SIM cards. The PIN2 code is required to
access certain functions supported by
the SIM card. The length of the PIN2
code is 4 to 8 digits.
133
Cyan Magenta Yellow Black
134
browse the web faster than previously
possible while simultaneously
speaking on the phone.
POP3
Post office protocol, version 3. A
common mail protocol that can be
used for accessing your remote
mailbox.
UPIN
PIN code used in UMTS network.
PUK and
PUK2
PIN Unblocking Key. PUK and PUK2
codes are required to change a blocked
PIN code or PIN2 code, respectively.
The length of the code is 8 digits.
UPUK
UPIN Unblocking Key. UPUK code is
required to change a blocked UPIN
code or PIN2 code. The length of the
code is 8 digits.
SIP
Session initiation protocol. SIP is used
for creating, modifying, and
terminating certain types of
communication sessions with one or
more participants.
USIM
SIM card used in UMTS network.
USSD
command
A service request, such as request to
activate an application or configure
various settings remotely, that you can
send to your operator or service
provider with your device.
VoIP
Voice over internet protocol
technology. VoIP is a set of protocols
that facilitate phone calls over an IP
network, such as the internet.
VPN
Virtual private network. VPN creates a
secure connection to compatible
corporate intranet and services, such
as e-mail.
WAP
Wireless application protocol. WAP is
an international standard for wireless
communication.
WEP
Wired equivalent privacy. WEP is an
encryption method that encrypts data
before it is transmitted in WLAN.
WLAN
Wireless local area network.
SSID
Service set identifier. SSID is the name
that identifies the specific WLAN.
Streaming
Streaming audio and video files means
playing them directly from the web
without downloading them first to
your device.
UMTS
Universal mobile telecommunications
system. UMTS is a 3G mobile
communication system. Besides voice
and data, UMTS enables audio and
video delivery to wireless devices.
When you use your device in GSM and
UMTS networks, multiple data
connections can be active at the same
time, and access points can share a
data connection. In the UMTS network,
data connections remain active during
voice calls. You can, for example,
Cyan Magenta Yellow Black
WPA
Wi-Fi Protected Access. Security
method for WLAN.
WPA2
Wi-Fi Protected Access 2. Security
method for WLAN.
135
Cyan Magenta Yellow Black
Troubleshooting
To see frequently asked questions about your device,
visit the product support pages at the Nokia web site.
Q: Why can’t I find my friend’s device while
using Bluetooth connectivity?
Q: What is my lock, PIN, or PUK code?
A: Check that both devices are compatible, have
activated Bluetooth connectivity, and are not in the
hidden mode. Check also that the distance between the
two devices is not over 10 metres (33 feet) and that
there are no walls or other obstructions between the
devices.
A: The default lock code is 12345. If you forget or lose
the lock code, contact your device dealer. If you forget
or lose a PIN or PUK code, or if you have not received
such a code, contact your network service provider.
Q: How do I close an application that is not
responding?
A: Press and hold the home key. Scroll to the
application, and press the backspace key to close the
application.
Q: Why do images look smudgy?
A: Ensure that the camera lens protection windows are
clean.
Q: Why do missing, discoloured, or bright
dots appear on the screen every time I switch
on my device?
A: This is a characteristic of this type of display. Some
displays may contain pixels or dots that remain on or
off. This is normal, not a fault.
136
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you
can end the connection using the other device or by
deactivating Bluetooth connectivity. Select Menu
ConnectivityBluetoothBluetoothOff.
Q: Why can't I see a WLAN access point even
though I know I'm within its range?
A: Check that the Offline profile is not in use in your
device.
The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use
a hidden SSID if you know the correct SSID, and have
created a WLAN access point for the network on your
Nokia device
Check that the WLAN access point is not on channels
12-13, as they cannot be associated with.
Cyan Magenta Yellow Black
Q: How do I switch WLAN off on my Nokia
device?
Q: Why do I have problems with the security
mode?
A: The WLAN on your Nokia device switches off when
you are not trying to connect, not connected to another
access point, or not scanning for available networks.
To further reduce battery consumption, you can specify
that your Nokia device does not scan, or scans less
often, for available networks in the background. WLAN
switches off in between background scans.
A: Check that you have configured the security mode
correctly, and that it is the same that the network uses.
To check the security mode the network uses, select
MenuConnectivityConn. mgr.Active data
connectionsOptionsDetails.
Check also the following: you have the correct WPA
mode (preshared key or EAP), you have disabled all EAP
types that are not needed, and all the EAP type settings
are correct (passwords, user names, certificates).
To stop the background scans, select MenuTools
SettingsConnectionWireless LANShow
WLAN availabilityNever. You can still manually
scan for available WLAN networks and connect to WLAN
networks as usual.
Q: Why can’t I select a contact for my
message?
To increase the background scan interval, select Show
WLAN availabilityYes, and define the interval in
Scan for networks.
A: The contact card does not have a phone number, an
address, or an e-mail address. Select Menu
Communic.Contacts, and edit the contact card.
Q: Why can't I browse the web even though
the WLAN connection is working and the IP
settings are correct?
Q: The note Retrieving message is shown
briefly. What is happening?
A: Check that you have defined the HTTP/ HTTPS proxy
settings correctly in the advanced settings of your
WLAN access point.
Q: How do I check the signal quality of my
WLAN connection?
Select MenuConnectivityConn. mgr.Active
data connectionsOptionsDetails. If the signal
quality is weak or moderate, you may encounter
connection problems. Try again closer to the access
point.
A: The device is trying to retrieve a multimedia
message from the multimedia messaging centre. This
note is shown if you have selected Menu
Communic.MessagingOptionsSettings
Multimedia messageMultimedia retrieval
Always automatic. Check that the settings for
multimedia messaging are defined correctly and that
there are no mistakes in phone numbers or addresses.
See "Multimedia message settings", p. 68.
Cyan Magenta Yellow Black
137
Q: How can I end the data connection when
the device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message centre. To stop
the device from making a data connection, select
MenuCommunic.MessagingOptions
SettingsMultimedia messageMultimedia
retrievalManual to have the multimedia
messaging centre save messages to be retrieved later,
or Off to ignore all incoming multimedia messages. If
you select Manual, you receive a notification when
there is a new multimedia message that you can
retrieve in the multimedia message centre. If you select
Off, the device does not make any network connections
related to multimedia messaging.
ವ Set the device to use a packet data connection only
if you start an application or action that needs it.
Select MenuToolsSettingsConnection
Packet dataPacket data connectionWhen
needed.
ವ Prevent the device from automatically downloading
new maps in the Maps application. Select Menu
GPSMapsOptionsSettingsInternet
Use networkOff.
ವ Change the time-out after which the backlight is
switched off. Select MenuToolsSettings
GeneralPersonalisationDisplayLight
time-out.
ವ Close the applications you do not use. Press and hold
the home key. Scroll to the application, and press
the backspace key to close the application.
To set the device to use a packet data connection only
if you start an application or action that needs it, select
MenuToolsSettingsConnectionPacket
dataPacket data connectionWhen needed.
If this does not help, switch the device off, and switch
it on again.
Q: How do I save battery power?
138
A: Many features in your device increase the demand
on battery power and reduce the battery life time. To
save battery power, do the following:
ವ Switch off Bluetooth when you do not need it.
ವ Stop the background scans for WLAN. Select Menu
ToolsSettingsConnectionWireless
LANShow WLAN availabilityNever. You can
still manually scan for available WLAN networks and
connect to WLAN networks as usual.
Cyan Magenta Yellow Black
Enhancements
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please
check with your dealer. When you disconnect the
power cord of any enhancement, grasp and pull the
plug, not the cord.
139
Cyan Magenta Yellow Black
Battery and charger information
Battery and charger
information
140
Your device is powered by a rechargeable battery. The
battery intended for use with this device is BL-4F. This
device is intended for use when supplied with power
from the following chargers: AC-5. The battery can be
charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times
are noticeably shorter than normal, replace the
battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved
chargers designated for this device. Use of an
unapproved battery or charger may present a risk of
fire, explosion, leakage, or other hazard.
The exact charger model number may vary depending
on the type of plug. The plug variant is identified by
one of the following: E, EB, X, AR, U, A, C, or UB. For
example, the model numbers for the charger can be,
among others, AC-5 etc.
If a battery is being used for the first time or if the
battery has not been used for a prolonged period, it
may be necessary to connect the charger, then
disconnect and reconnect it to begin charging the
battery. If the battery is completely discharged, it may
take several minutes before the charging indicator
appears on the display or before any calls can be made.
Always switch the device off and disconnect the
charger before removing the battery.
Unplug the charger from the electrical plug and the
device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully charged
battery will lose its charge over time.
Always try to keep the battery between 15°C and 25°C
(59°F and 77°F). Extreme temperatures reduce the
capacity and lifetime of the battery. A device with a hot
or cold battery may not work temporarily. Battery
performance is particularly limited in temperatures
well below freezing.
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object such as a
coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery.
(These look like metal strips on the battery.) This might
happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals
may damage the battery or the connecting object.
Do not dispose of batteries in a fire as they may
explode. Batteries may also explode if damaged.
Dispose of batteries according to local regulations.
Cyan Magenta Yellow Black
Please recycle when possible. Do not dispose as
household waste.
Do not dismantle, cut, open, crush, bend, deform,
puncture, or shred cells or batteries. In the event of a
battery leak, do not allow the liquid to come in contact
with the skin or eyes. In the event of such a leak, flush
your skin or eyes immediately with water, or seek
medical help.
Do not modify, remanufacture, attempt to insert
foreign objects into the battery, or immerse or expose
it to water or other liquids.
Improper battery use may result in a fire, explosion, or
other hazard. If the device or battery is dropped,
especially on a hard surface, and you believe the
battery has been damaged, take it to a service centre
for inspection before continuing to use it.
Use the battery only for its intended purpose. Never use
any charger or battery that is damaged. Keep your
battery out of the reach of small children.
Nokia battery
authentication
guidelines
Always use original Nokia batteries for your safety. To
check that you are getting an original Nokia battery,
purchase it from an authorised Nokia dealer, and
inspect the hologram label using the following steps:
Successful completion of the steps is not a total
assurance of the authenticity of the battery. If you have
any reason to believe that your battery is not an
authentic, original Nokia battery, you should refrain
from using it, and take it to the nearest authorised
Nokia service point or dealer for assistance. Your
authorised Nokia service point or dealer will inspect
the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1. When you look at the hologram
on the label, you should see the
Nokia connecting hands
symbol from one angle and the
Nokia Original Enhancements
logo when looking from
another angle.
2. When you angle the hologram
left, right, down and up, you
should see 1, 2, 3 and 4 dots on
each side respectively.
What if your battery is not
authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorised Nokia service point or dealer for assistance.
Cyan Magenta Yellow Black
141
The use of a battery that is not approved by the
manufacturer may be dangerous and may result in
poor performance and damage to your device and its
enhancements. It may also invalidate any approval or
warranty applying to the device.
142
Cyan Magenta Yellow Black
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your
warranty coverage.
ವ Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals
that will corrode electronic circuits. If your device
does get wet, remove the battery, and allow the
device to dry completely before replacing it.
ವ Do not use or store the device in dusty, dirty areas.
Its moving parts and electronic components can be
damaged.
ವ Do not store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
ವ Do not store the device in cold areas. When the
device returns to its normal temperature, moisture
can form inside the device and damage electronic
circuit boards.
ವ Do not attempt to open the device other than as
instructed in this guide.
ವ Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
ವ Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the device.
ವ Do not paint the device. Paint can clog the moving
parts and prevent proper operation.
ವ Use a soft, clean, dry cloth to clean any lenses, such
as camera, proximity sensor, and light sensor lenses.
ವ Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may
violate regulations governing radio devices.
ವ Use chargers indoors.
ವ Always create a backup of data you want to keep,
such as contacts and calendar notes.
ವ To reset the device from time to time for optimum
performance, power off the device and remove the
battery.
These suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is
not working properly, take it to the nearest authorised
service facility for service.
Cyan Magenta Yellow Black
143
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that all electrical and electronic products,
batteries, and accumulators must be taken to
separate collection at the end of their working life. This
requirement applies to the European Union and other
locations where separate collection systems are
available. Do not dispose of these products as unsorted
municipal waste.
By returning the products to collection you help
prevent uncontrolled waste disposal and promote the
reuse of material resources. More detailed information
is available from the product retailer, local waste
authorities, national producer responsibility
organizations, or your local Nokia representative. For
the product Eco-Declaration or instructions for
returning your obsolete product, go to country-specific
information at www.nokia.com.
144
Cyan Magenta Yellow Black
Additional safety information
Small children
Medical devices
Your device and its enhancements may contain small
parts. Keep them out of the reach of small children.
Operation of any radio transmitting equipment,
including wireless phones, may interfere with the
functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the
medical device to determine if they are adequately
shielded from external RF energy or if you have any
questions. Switch off your device in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Operating
environment
This device meets RF exposure guidelines when used
either in the normal use position against the ear or
when positioned at least 2.2 centimetres (7/8 inch)
away from the body. When a carry case, belt clip, or
holder is used for body-worn operation, it should not
contain metal and should position the device the
above-stated distance from your body.
To transmit data files or messages, this device requires
a quality connection to the network. In some cases,
transmission of data files or messages may be delayed
until such a connection is available. Ensure the above
separation distance instructions are followed until the
transmission is completed.
Parts of the device are magnetic. Metallic materials
may be attracted to the device. Do not place credit
cards or other magnetic storage media near the device,
because information stored on them may be erased.
Implanted medical devices
Manufacturers of medical devices recommend that a
minimum separation of 15.3 centimetres (6 inch)
should be maintained between a wireless device and
an implanted medical device, such as a pacemaker or
implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who
have such devices should:
ವ Always keep the wireless device more than 15.3
centimetres (6 inch) from the medical device when
the wireless device is turned on.
Cyan Magenta Yellow Black
145
ವ Not carry the wireless device in a breast pocket.
ವ Hold the wireless device to the ear opposite the
medical device to minimise the potential for
interference.
ವ Turn the wireless device off immediately if there is
any reason to suspect that interference is taking
place.
ವ Read and follow the directions from the
manufacturer of their implanted medical device.
If you have any questions about using your wireless
device with an implanted medical device, consult your
health care provider.
Hearing aids
Some digital wireless devices may interfere with some
hearing aids. If interference occurs, consult your
service provider.
Vehicles
146
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles such as electronic fuel injection systems,
electronic antiskid (antilock) braking systems,
electronic speed control systems, and air bag systems.
For more information, check with the manufacturer, or
its representative, of your vehicle or any equipment
that has been added.
Only qualified personnel should service the device or
install the device in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly
that all wireless device equipment in your vehicle is
mounted and operating properly. Do not store or carry
flammable liquids, gases, or explosive materials in the
same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not
place objects, including installed or portable wireless
equipment in the area over the air bag or in the air bag
deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
Using your device while flying in aircraft is prohibited.
Switch off your device before boarding an aircraft. The
use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the
wireless telephone network, and may be illegal.
Potentially explosive
environments
Switch off your device when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Potentially explosive atmospheres
include areas where you would normally be advised to
turn off your vehicle engine. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refuelling points
such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical
plants; or where blasting operations are in progress.
Cyan Magenta Yellow Black
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They include
below deck on boats, chemical transfer or storage
facilities and areas where the air contains chemicals or
particles such as grain, dust, or metal powders. You
should check with the manufacturers of vehicles using
liquefied petroleum gas (such as propane or butane) to
determine if this device can be safely used in their
vicinity.
Emergency calls
Important: This device operates using radio
signals, wireless networks, landline networks, and
user-programmed functions. If your device supports
voice calls over the internet (internet calls), activate
both the internet calls and the cellular phone. The
device will attempt to make emergency calls over both
the cellular networks and through your internet call
provider if both are activated. Connections in all
conditions cannot be guaranteed. You should never
rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for
adequate signal strength. Depending on your
device, you may also need to complete the
following:
ವ Insert a SIM card if your device uses one
ವ Remove certain call restrictions you have
activated in your device.
ವ Change your profile from offline or flight profile
mode to an active profile.
2. Press the end key as many times as needed to clear
the display and ready the device for calls.
3. Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4. Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless
device may be the only means of communication at the
scene of an accident. Do not end the call until given
permission to do so.
CERTIFICATION
INFORMATION (SAR)
This mobile device meets guidelines for exposure
to radio waves.
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international
guidelines. These guidelines were developed by the
independent scientific organisation ICNIRP and include
safety margins designed to assure the protection of all
persons, regardless of age and health.
The exposure guidelines for mobile devices employ a
unit of measurement known as the Specific Absorption
Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over
10 grams of tissue. Tests for SAR are conducted using
Cyan Magenta Yellow Black
147
standard operating positions with the device
transmitting at its highest certified power level in all
tested frequency bands. The actual SAR level of an
operating device can be below the maximum value
because the device is designed to use only the power
required to reach the network. That amount changes
depending on a number of factors such as how close
you are to a network base station. The highest SAR
value under the ICNIRP guidelines for use of the device
at the ear is 1.37 W/kg.
Use of device accessories and enhancements may
result in different SAR values. SAR values may vary
depending on national reporting and testing
requirements and the network band. Additional SAR
information may be provided under product
information at www.nokia.com.
Your mobile device is also designed to meet the
requirements for exposure to radio waves established
by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of
1.6 W/kg averaged over one gram of tissue. The highest
SAR value reported under this standard during product
certification for use at the ear is 1.33 W/kg and when
properly worn on the body is 0.45 W/kg.
148
Cyan Magenta Yellow Black
Index
Symbols/Numerics
3-D ringing tones 35
802.1x
security settings 126
background image 35
backing up data 111
barcodes 118
battery
charge level 21
charging 14
inserting 13
blogs 49
Bluetooth
authorising devices 102
pairing 102
passcode 102
receiving data 101
security 102
sending data 101
bookmarks 49
browsing
intranet 50
offline 49
web 48
access points
creating 124
VPN 117
activation keys 114
Active notes 92
settings 92
alarm clock 96
alert tones 120
altitude calibration 89
animated screen saver 35
antennas 15
application settings 129
applications
common actions 20
installing 112
modifying installations 113
attachments
e-mail 58
multimedia messages 63
sound clips 63
audio files
details 45
sending 45
autolock period 122
cable 99
cache
emptying 49
Calculator 93
Calendar
settings 30
calendar entries
creating 30
viewing 29
calendar key 29
calendar views
changing 29
call barring 77
net calls 78
call divert 77
caller ID 123
calls
answering 72
barring net calls 78
call waiting 123
caller ID 123
conference call 73
fax calls 73
fixed dialling 108
making 72
making a call from Log 83
making a net call 76
muting the ringing tone 72
net call alert 123
PTT 81
rejecting 72
rejecting with text
message 123
selecting type 123
settings 123
speed dialling 77
voice commands 80
Cyan Magenta Yellow Black
149
150
voice dialling 80
voice mail 78
camera
capturing images 36
image settings 38
playing videos 37
scenes 36
sequence mode 37
toolbar 36
video clips 37
video settings 38
viewing images 37
car kit
remote SIM access 103
cell broadcast 67
settings 71
certificates
details 109
settings 110
charging the battery 14
Clock
alarms 96
settings 97
world clock 96
conference calls 73
configuration messages 128
connection methods
Bluetooth 101
data cable 99
infrared 100
modem 105
connections
ending 106
GPRS settings 51, 52
PC connection 53
WLAN settings 52
connectors 10
contact groups
adding ringing tones 31
creating 31
making conference calls 31
contacts
adding 31
adding ringing tones 31
searching 31
settings 32
contacts directories
managing 31
contacts key 28
converting
currencies 94
measurements 94
currency conversions 94
date
settings 121
decrypting
device memory and memory
card 108
destination
removing 89
setting 89
Device manager 111
display
changing the look 35
indicators 21
settings 119
display rotation 11
settings 119
Download!
managing items 50
purchase history 51
search settings 51
settings 51
subscriptions 50
DTMF tones 78
e-mail
automatic retrieval
settings 70
connecting to mailbox 57
connection settings 69
creating folders 59
deleting 59
replying 58
retrieval settings 70
sending 58
user settings 69
writing 58
e-mail key 29
e-mail key settings 122
e-mail setup 57
e-mail wizard 57
EAP
plug-in settings 127
using an EAP plug-in 127
encrypting
device memory and memory
card 108
ending
internet connections 49
network connections 106
Cyan Magenta Yellow Black
enhancements
remote SIM access
settings 121
equaliser 42
103
fax calls 73
feeds 49
File manager 93
files
downloading 44
flash files 46
sending 93
fixed dialling 108
free memory 23
Gallery 44
GPRS
access point settings 51
advanced access point
settings 52
settings 124
headset
connecting 15
home key 28
home screen 27
settings 34, 120
switching 28
HSDPA (high-speed downlink
packet access) 99
IM
key store 110
keyguard 12
keypad
lock settings 122
locking 12
tones 120
keys 10
activation keys 114
shortcuts 120
WEP keys 126
application settings 66
blocking users 66
groups 65
settings 64
starting a conversation 65
images
adding to contacts 44
display background 44
rotating 44
sending 44
sharing online 43
zooming 44
indicators 21
infrared 100
inserting
battery 13
memory card 14
SIM card 13
installation log 112
installing
applications 112
internet 48
ending connections 49
internet calls 76
intranet
browsing 50
jad files 112
jar files 112
Java applications
112, 113
landmarks
categories 91
creating 90
editing 90
receiving 91
sending 91
language
changing 25
settings 120
lock code 107, 122
locking
device 107
device autolock 122
keypad 12, 122
Log 82
adding numbers to
Contacts 83
deleting 83
making a call 83
sending messages 83
settings 83
Cyan Magenta Yellow Black
151
transfer log 20
logos
operator logo 120
welcome logo 119
152
mailboxes
connecting 57
making a call 72
Maps 85, 86
browsing 86
driving 88
finding locations 87
indicators 86
routes 87
traffic information 88
travel guides 89
walking 87
measurements
converting 94
measuring system
changing 89
memory 23
memory card
backing up data 111
formatting 24
inserting 14
locking 107
microSD 23
passwords 107
setting password 24, 93
unlocking 24
menu 18
message reader 56
selecting voice 56
messages 55
call rejection messages 123
cell broadcast settings 71
configuration messages 128
other settings 71
sending sound clips 63
service messages 67
text message settings 68
Messaging
folders 55, 56
microSDHC 23
modem 53, 105
multimedia messages
attachments 63
creating 61
creating presentations 62
forwarding 63
receiving 62
replying to 62
sending 61
sending options 63
settings 68
multitasking 32
Music player
Music Store 41
playing 40
playlists 41
transferring music 41
Music Store 41
net calls 76
alert settings 123
barring 78
connecting 76
making a call 76
profiles 75, 128
settings 128
network
settings 123
Nokia PC Suite 99
Notes 97
notification light 120
One-touch keys 121
operator
logo 120
selecting 123
original settings 122
packet data
access point settings 51
advanced access point
settings 52
restricting 129
settings 124
pairing
devices 102
passcode 102
passwords
memory card password 24,
93
PC Suite 99
PDF reader 95
personalisation 35
changing language 120
display 119
Cyan Magenta Yellow Black
home screen 120
tones 120
picture messages
forwarding 60
viewing 60
PIN code
changing 122
playing
messages 56
recordings 43
video and audio 45
podcasting 38
directories 39
searching 39
settings 40
positioning
settings 85
predictive text input 25, 120
presentations 62
printer settings 96
printing 95
profiles
creating 33
customising 33, 34
net call profile 75, 128
selecting ringing tones 33
PTT
contacts 82
created calls 82
creating a channel 82
exiting 82
logging in 81
making a call 81
settings 81
Quickoffice 94
radio
listening to 46
saved stations 47
settings 47
viewing visual content 47
RealPlayer
playing media clips 45
sending files 45
settings 46
viewing clip details 45
recorder
playing recordings 43
recording a sound clip 43
settings 43
recording
sound clips 43
remote configuration 111
remote lock 107
remote synchronisation 115
restoring original settings 122
ringing tones 120
3-D 35
contacts and contact
groups 31
in profiles 33
vibrating alert 120
satellite signal strength
89
saving
current position 89
files 20
settings 20
screen saver 35, 119
scroll key lights 12
search modes
switching 31
searching
available WLANs 106
security
Bluetooth 102
device and SIM card 122
Java application 113
memory card 107
security module 110
sending
files 20, 93
using Bluetooth 101
videos 74
service commands 67
service messages 67
settings 70
session initiation protocol
See SIP
settings
Active notes 92
advanced WLAN 125
application installations 113
applications 129
Calendar 30
calls 123
camera 38
cell broadcast 71
certificate 110
Cyan Magenta Yellow Black
153
154
clock 97
contacts 32
date 121
display 119
Download! application 51
e-mail connection 69
e-mail key 122
e-mail retrieval 70
e-mail user 69
EAP plug-ins 127
enhancements 121
GPRS 51, 52, 124
home screen 120
IM 64
Java application security 113
keypad lock 122
language 120
Log 83
multimedia messages 68
net call 128
network 123
packet data 124
podcasting 40
positioning 85
printer 96
PTT 81
radio 47
RealPlayer 46
recorder 43
restoring 122
service messages 70
SIP 127
slide 121
text messages 68
time 121
tones 120
voice commands 80
Web 49
WEP security 125
WLAN 125
WLAN access point 52, 53
WLAN security 125
Settings wizard 18
shortcuts 130
keys 120
signal strength 21
silencing
alarms and incoming calls 11,
120
SIM access profile 103
SIM card
inserting 13
text messages 60
SIP
creating profiles 127
editing profiles 127
editing proxy servers 128
editing registration
servers 128
settings 127
sis files 112
sisx files 112
slide
opening and closing 12
settings 121
software packages
installation settings 113
installing 112
sound clips
recording 43
sending 63
Speech 56
speed dialling 77
standby mode
settings 120
switching device on and off 17
Symbian applications 112
synchronisation 20
settings 116
synchronisation profiles 115
synchronising
applications 116
tabs 20
text
changing size 119
letter mode 24
number mode 24
predictive input 25
traditional input 24
text messages
messages on SIM card 60
sending 59
sending options 60
settings 68
writing 59
themes
changing 35
downloading 35
time
settings 121
tones 120
settings 120
Cyan Magenta Yellow Black
toolbar
camera 36
traditional text input 24
Transfer
log 20
transferring data 20
trip destination 89
trip meter 89
troubleshooting 136
UPIN code
changing 122
USB data cable 99
vibrating alert 120
video
playing 37
video calls
making a call 74
switching to voice call 74
video clips
details 45
playing 45
sending 45
video sharing 74
receiving invitations 74
virtual private network
access points 117
use in applications 117
Voice aid 79
voice commands
changing profiles 80
launching an application 80
settings 80
voice mail
calling 78
changing number 78
voice over IP 76
VoIP 76
volume 23
VPN
access points 117
use in applications 117
security settings 125
settings 125
WEP keys 126
WPA security settings 126
WLAN wizard 104
world clock 96
WPA security settings 126
writing language 25
Zip manager 95
wallpaper 44
warning tones 120
Web
connection security 48
settings 49
weblogs 49
Welcome application 17
welcome note 119
WEP
keys 126
security settings 125
wireless keyboard 97
WLAN
802.1x security settings 126
access point settings 52
access points 104
advanced access point
settings 53
advanced settings 125
availability 104
MAC address 104, 125
searching for networks 106
Cyan Magenta Yellow Black
155

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:05:07 11:48:30+03:00
Modify Date                     : 2008:05:07 11:50:22+03:00
Metadata Date                   : 2008:05:07 11:50:22+03:00
Creator Tool                    : PScript5.dll Version 5.2.2
Document ID                     : uuid:9E52B655121CDD11AD27C6EE0338647A
Instance ID                     : uuid:3fb064fe-ebad-467e-99d5-af5b8b0b389a
Derived From Document Name      : uuid:2159b750-4a97-4d51-818c-e6d4e7134ec9
Derived From Instance ID        : uuid:15825e31-9f0c-4015-9c08-ecfbd5969731
Derived From Document ID        : uuid:0c21e891-2de1-4527-b104-cfbed847232b
Format                          : application/pdf
Creator                         : mode
Title                           : Exhibit08_User_Guide.pdf
Page Count                      : 155
Author                          : mode

EXIF Metadata provided by EXIF.tools

Microsoft RM-420 GSM/WCDMA cellular phone w/BT and WLAN User Manual Exhibit08 User Guide

Microsoft Mobile Oy GSM/WCDMA cellular phone w/BT and WLAN Exhibit08 User Guide

Manual

FCC ID Filing: PYARM-420

Navigation menu

Namespaces

Views

Navigation