Microsoft RM-455 GSM/WCDMA Cellular Telephone w/ BT User Manual RM455 FCC Draft 14Jan2009b
Microsoft Mobile Oy GSM/WCDMA Cellular Telephone w/ BT RM455 FCC Draft 14Jan2009b
Manual
1
Nokia XXXX User Guide
9210963
Issue 1
01/14/2009
FCC Draft
2
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-455
product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. A copy of the
Declaration of Conformity can be found at http://
www.nokia.com/phones/declaration_of_conformity/.
© 2009 Nokia. All rights reserved.
Nokia, Nokia Connecting People, and Navi are trademarks or registered trademarks of Nokia
Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company
names mentioned herein may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C)
1997-2009. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java is a trademark of Sun Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial
activity and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes
and improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
0434
01/14/2009
FCC Draft
3
The availability of particular products and applications and services for these products may
vary by region. Please check with your Nokia dealer for details, and availability of language
options.
The third-party applications provided with your device may have been created and may be
owned by persons or entities not affiliated with or related to Nokia. Nokia does not own the
copyrights or intellectual property rights to the third-party applications. As such, Nokia does
not take any responsibility for end-user support, functionality of the applications, or the
information in the applications or these materials. Nokia does not provide any warranty for
the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED
AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR
ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY
PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
Export controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia
could void the user's authority to operate this equipment.
9210963/Issue 1
01/14/2009
FCC Draft
Contents
4
Contents
SAFETY ................................................................................................................. 4
1. Get started .................................................................................................... 8
2. Your phone................................................................................................. 13
3. Call functions............................................................................................ 17
4. Navigate the menus ................................................................................. 20
5. Music ........................................................................................................... 20
6. Write text................................................................................................... 21
7. Messaging .................................................................................................. 22
8. YELLOWPAGES .......................................................................................... 34
11. My Stuff .................................................................................................... 41
12. Address Book............................................................................................ 56
13. Settings...................................................................................................... 60
14. PC connectivity ....................................................................................... 71
15. Battery and charger information ....................................................... 72
Index ...................................................................................................................80
01/14/2009
FCC Draft
SAFETY
5
SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could
affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
01/14/2009
FCC Draft
General information
6
General information
■About your device
The wireless device described in this guide is approved for use on the
UMTS 850, 1900, and 2100, and GSM 850, 900, 1800, and 1900 MHz
networks. Contact your service provider for more information about
networks.
When using the features in this device, obey all laws and respect local
customs, privacy and legitimate rights of others, including copyrights.
Copyright protection may prevent some images, music, and other
content from being copied, modified, or transferred.
Your device may have preinstalled bookmarks and links for third-party
internet sites. You may also access other third-party sites through your
device. Third-party sites are not affiliated with Nokia, and Nokia does
not endorse or assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
Warning: To use any features in this device, other than the
alarm clock, the device must be switched on. Do not switch the
device on when wireless device use may cause interference or
danger.
Remember to make back-up copies or keep a written record of
all important information stored in your device.
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
The images in this guide may differ from your device display.
■Network services
To use the device you must have service from a wireless service provider.
Many of the features require special network features. These features
are not available on all networks; other networks may require that you
make specific arrangements with your service provider before you can
01/14/2009
FCC Draft
General information
7
use the network services. Using network services involves transmission
of data. Check with your service provider for details about fees in your
home network and when roaming on other networks. Your service
provider can give you instructions and explain what charges will apply.
Some networks may have limitations that affect how you can use
network services. For instance, some networks may not support all
language-dependent characters and services.
Your service provider may have requested that certain features be
disabled or not activated in your device. If so, these features will not
appear on your device menu. Your device may also have a special
configuration such as changes in menu names, menu order, and icons.
Contact your service provider for more information.
■Access codes
To set how your phone uses the access codes and security settings,
select Menu > Settings > Security > Access codes.
• The PIN (UPIN) code, supplied with the SIM (USIM) card, helps to
protect the card against unauthorized use.
• The PIN2 (UPIN2) code, supplied with some SIM (USIM) cards, is
required to access certain services.
• PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with the SIM
(USIM) card. If you enter the PIN code incorrectly three times in
succession, you are asked for the PUK code. If the codes are not
supplied, contact your service provider.
• The security code helps to protect your phone against unauthorized
use. You can create and change the code, and set the phone to
request the code. Keep the code secret and in a safe place separate
from your phone. If you forget the code and your phone is locked,
your phone will require service and additional charges may apply. For
more information, contact a Nokia Care point or your phone dealer.
• The call restriction password is required when using the call barring
service to restrict calls to and from your phone (network service).
• To view or change the security module settings for the web browser,
select Menu > Settings > Security > Security module sett.
01/14/2009
FCC Draft
General information
8
■Configuration settings service
To use some of the network services, such as mobile internet services,
MMS, Nokia Xpress audio messaging, or remote internet server
synchronization, your phone needs the correct configuration settings.
For more information on availability, contact your network operator,
service provider, nearest authorized Nokia dealer, or visit the support
area on the Nokia website, www.nokia.com/support.
When you have received the settings as a configuration message, and
the settings are not automatically saved and activated, Configuration
settings received is displayed.
■Download content
You may be able to download new content (for example, themes) to the
phone (network service).
For the availability of different services and pricing, contact your service
provider.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■Assisted Global Positioning System
Your phone may have Assisted Global Positioning System (A-GPS), a
positioning system that uses an assistance server and reference network
to make measurements and determine location. A-GPS is dependent on
your network service. Contact your provider for additional information.
A-GPS may also utilize cellular radio networks for aiding in positioning
in some circumstances where standalone GPS positioning is unavailable.
This feature requires network support and coverage.
A-GPS should not be used for precise location measurement, and you
should never rely solely on location data from the A-GPS module.
■Nokia support
Check www.nokia.com/support or your local Nokia website for the latest
version of this guide, additional information, downloads, and services
related to your Nokia product.
01/14/2009
FCC Draft
Get started
9
On the website, you can get information on the use of Nokia products
and services. If you need to contact customer service, check the list of
local Nokia Care contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia service center at
www.nokia.com/repair.
1. Get started
■Install SmartChip card and battery
Always switch the device off and disconnect the charger before removing the
battery.
This device is intended for use with BP-6MT battery. Always use original
Nokia batteries. See ”Nokia battery authentication” on page 66.
The SmartChip card and its contacts can easily be damaged by scratches
or bending, so be careful when handling, inserting, or removing the card.
To remove the back
cover of the phone,
slide the release
button back (1) pull
the back cover up (2)
and push the cover
forward (3).
Remove the battery as
shown.
01/14/2009
FCC Draft
Get started
10
Insert the SmartChip card
properly into the holder.
Replace the battery. To
replace the back cover, align
the tabs on the cover to the
slots on the back of the
phone (1). Push the cover
into place as shown (2).
■Insert a microSD card
Use only compatible microSD cards with this device. Other memory cards, such as
reduced size MultiMedia cards, do not fit in the microSD card slot and are not
compatible with this device. Using an incompatible memory card may damage
the memory card as well as the device, and data stored on the incompatible card
may be corrupted.
Use only microSD cards approved by Nokia for use with this device. Nokia utilizes
the approved industry standards for memory cards but not all other brands may
function correctly or be fully compatible with this device.
01/14/2009
FCC Draft
Get started
11
1. Remove the back
cover and the
battery. Push the
memory card
holder forward
(1)and swing card
holder up (2),
2. Insert the card
into the memory
card holder with
the gold-colored
contact area
facing down (3).
3. Close the card
holder (3 and 4) and slide the card holder back in place (5).
Replace the battery and back cover.
Memory card
Keep all memory cards out of the reach of small children.
You can use the microSD memory card to store your multimedia files
such as video clips, music tracks, and sound files, images, and messaging
data, and to back up information from phone memory.
Some of the folders in Tones & Graphics with content that the phone
use, for example, Themes, may be stored on a memory card.
■Charge the battery
Your battery has been precharged, but the charging levels may vary.
01/14/2009
FCC Draft
Get started
12
1. Connect the charger to a
wall socket.
2. Connect the charger to
your phone.
3. When the battery is fully
charged, disconnect the
charger from the device,
then from the wall outlet.
You may also charge the
battery with a USB cable with
power from a computer.
1. Connect the USB cable to the USB port of a computer and to your
device.
2. When the battery is full, disconnect the USB cable.
If the battery is completely discharged, it may take a few minutes before
the charging indicator appears on the display or before any calls can be
made.
The charging time depends on the charger used. Charging the BP-6MT
battery with the AC-6 charger takes approximately XXX while the phone
is in standby mode.
Note: The phone shall only be connected to products that bear
the USB-IF logo or have completed the USB-IF compliance
program.
01/14/2009
FCC Draft
Get started
13
■Connect a headset
You can connect a
universal 2.5 mm
headset to your
device. Connect the
headset to the device
as shown.
■Antenna
Your device has an
internal antenna
located at the
bottom of the phone.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with
the antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact with
the antenna area when operating the device
optimizes the antenna performance and the
battery life.
01/14/2009
FCC Draft
Get started
14
■Phone strap
Remove the back cover of the
phone. Insert a thread through
the eyelet. Place the thread
around the post of the phone
as shown in the picture.
Tighten the thread. Put the
back cover back in place.
01/14/2009
FCC Draft
Your phone
15
2. Your phone
■Keys and parts
1 Earpiece 10
2 Display 11
3 NaviTM (scroll key) 12
4 13
5 14
6 15
7 16
8 17
9 18
01/14/2009
FCC Draft
Your phone
16
Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
To switch the phone on or off, press and hold the power key. See ”Keys
and parts” on page 15.
If the phone asks for a PIN or a UPIN code, enter the code (displayed as
****), and select OK.
Set the time, time zone, and date
Enter the local time, select the time zone of your location in terms of the
time difference with respect to Greenwich Mean Time (GMT), and enter
the date. See ”Set time and date” on page 53.
■Key functions
The Navi TM key and selections keys have the
following functions:
1. Navi TM key — scroll up, down, left, right,
and select with the center key
2. Right selection key — connect to Music
3. __________ — _____________________
4. Camera and video key — connect to the camera or video
5. Left selection key — Options connects to shortcuts.
6.
■Standby mode
When the phone is ready for use, and you have not entered any
characters, the phone is in the standby mode.
01/14/2009
FCC Draft
Your phone
17
Main display
1Network mode indicator
2Signal strength of the cellular network
3Battery charge status
4Indicators
5Network name or the operator logo
6Clock
7Main display
8The left selection key
9The middle selection key
10 The right selection key
Indicators
You have unread messages.
You have new voice mail.
You have unsent, canceled or failed messages.
The phone registered a missed call.
, Your phone is connected to an instant messaging service,
and the availability status is online or offline. Icons vary with
services.
You received one or several instant messages.
The keypad is locked.
The phone does not ring for an incoming call or text message.
The alarm clock is activated.
The countdown timer is running.
The stopwatch is running.
The phone is registered to the GPRS or EGPRS network.
01/14/2009
FCC Draft
Your phone
18
A GPRS or EGPRS connection is established.
The GPRS or EGPRS connection is suspended (on hold).
A Bluetooth connection is active.
, Push-to-talk connection is active or suspended.
If you have two phone lines, the second phone line is selected.
All incoming calls are forwarded to another number.
The loudspeaker is activated, or the music stand is connected to
the phone.
Calls are limited to a closed user group.
The timed profile is selected.
, , , or A headset, handsfree, loopset, or music stand
enhancement is connected to the phone.
■Keypad lock (keyguard)
Select Menu or Unlock, and press * within
1.5 seconds to lock or unlock the keypad.
To set the automatic keyguard on with a time
delay, select Menu > Settings > Phone
settings > Automatic keyguard.
To answer a call when the keyguard is on,
press the call key or open the phone. When
you end or reject the call, the keypad
automatically locks.
Security keyguard
The security keyguard requires a 5 to 10 digit code to protect against
unauthorized use. To change the code and activate the security
keyguard, select Menu > Settings > Phone settings > Security keyguard.
When the security keyguard is activated, enter the security code if
requested.
01/14/2009
FCC Draft
Call functions
19
For more information, see Security keyguard, in ”Phone settings” on
page 60.
When the automatic or security keyguard is on, calls still may be possible to the
official emergency number programmed into your device.
Offline profile
Important: In the offline profile you cannot make or receive any calls, or
use other features that require cellular network coverage. Calls may still
be possible to the official emergency number programed into your
device. To make calls, you must first activate the phone function by
changing profiles. If the device has been locked, enter the lock code.
To activate the Offline profile, press the power key, and select Offline.
When the Offline profile is active, the connection to the cellular network
is turned off. You can listen to music using the music player when the
Offline profile is active. Remember to switch off your device when
wireless phone use is prohibited.
To leave the Offline profile, press the power key, and select another profile.
■Functions without a SmartChip card
Several functions of your phone may be used without installing a
SmartChip card (for example, the data transfer with a compatible PC or
another compatible device). Without a SmartChip card, some functions
appear dimmed in the menus and cannot be used.
For an emergency call, some networks may require that a valid SmartChip card is
properly inserted in the device.
3. Call functions
■Make a voice call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the
+ character replaces the international access code), enter the
country code, the area code without the leading 0, if necessary, and
the phone number.
01/14/2009
FCC Draft
Call functions
20
2. To call the number, press the call key.
To increase the volume in a call, press the volume up key and to
decrease press the volume down key.
3. To end the call or to cancel the call attempt, press the end key.
To search for a name or phone number that you have saved in Address
book, see ”Find a contact” on page 48. Press the call key to call the
number.
To access the list of dialed numbers, press the call key once in the
standby mode. To call the number, select a number or name, and press
the call key.
Speed dialing
Assign a phone number to one of the speed-dialing keys, 2 to 9. See
”Speed dial list” on page 51. Call the number in either of the following
ways:
• Press a speed-dialing key, then the call key.
•If Speed dialing is set to On, press and hold a speed-dialing key until
the call begins. See Speed dialing in ”Call settings” on page 59.
Enhanced voice dialing
You can say the name saved in the contact list of the phone to make a
phone call. Voice commands are not language-dependent. To set the
language, see Voice playback lang. in ”Phone settings” on page 60.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
1. In the standby mode, press and hold the right selection key or press
and hold the volume down key. A short tone is played, and Speak now
is displayed.
2. Say the voice command clearly. If the voice recognition was
successful, a list with matches is shown. The phone plays the voice
command of the match on the top of the list. If the result is not the
correct one, scroll to another entry.
01/14/2009
FCC Draft
Call functions
21
Using voice commands to carry out a selected phone function is
similar to voice dialing. See Voice commands in ”My shortcuts” on
page 54.
■Answer or end a call
To answer an incoming call, press the call key, or open the phone. To end
the call, press the end key or close the phone.
To reject an incoming call, press the end key or close the phone. To reject
an incoming call when the phone is closed, press and hold a volume key.
To mute the ringing tone, press a volume key when the phone is closed,
or select Silence when the phone is open.
Call waiting
To answer the waiting call during an active call, select Answer. The first
call is put on hold. To end the active call, press the end key. To switch
back to the first call without ending the second call, select Options >
Swap.
To activate the call waiting function, see ”Call settings” on page 59.
■Options during a voice call
Many of the options that you can use during a call are network services.
For availability, contact your service provider.
During a call, select Options and from the following:
Call options are Mute or Unmute, Address book, Menu, Lock keypad,
Record, Loudspeaker or Handset.
Network services options are Answer or Reject, Hold or Unhold, PTT
Contacts, New call, Add to conference, End call, End all calls, and the
following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer — to connect a call on hold to an active call and disconnect
yourself
Conference — to make a conference call of up to five persons
Private call —to discuss privately in a conference call
01/14/2009
FCC Draft
Navigate the menus
22
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
4. Navigate the menus
The phone offers you an extensive range of functions, which are
grouped into menus.
1. To access the menu, select Menu.
To change the menu view, select Options > Main menu view > List,
Grid, Grid with labels, or Tab.
To rearrange the menu, scroll to the menu you want to move, and
select Options > Organize > Move. Scroll to where you want to
move the menu, and select OK. To save the change, select Done >
Yes.
2. Scroll through the menu, and select an option (for example,
Settings).
3. If the selected menu contains further submenus, select the one you
want (for example, Call).
4. If the selected menu contains further submenus, repeat step 3.
5. Select the setting of your choice.
6. To return to the previous menu level, select Back. To exit the menu,
select Exit.
5. Music
This menu provides access to the music player, various music-related
tools, applications, and services.
To open the music player from the standby mode, select Menu > Music
> Music player, or press the right selection key.
See ”Media player” on page 37 for more information on using the music
player.
01/14/2009
FCC Draft
Write text
23
6. Write text
You can enter text (for example, when writing messages) using
traditional or predictive text input. When you write text, text input
indicators appear at the top of the display. indicates traditional text
input. indicates predictive text input. Predictive text input allows
you to write text quickly using the phone keypad and a built-in
dictionary. You can enter a letter with a single keypress. indicates
predictive text input with Word suggestions. The phone predicts and
completes the word before you enter all the characters.
, , or appears next to the text input indicator, indicating the
character case. To change the character case, press #.
indicates number mode. To change from the letter to number mode,
press and hold #, and select Number mode.
To set the writing language while writing text, select Options > Writing
language.
■Predictive text input
To set predictive text input on while writing a message, select Options >
Prediction options > Status > On.
Tip: To quickly set predictive text input on or off or switch to
number mode when writing text, press # twice, or select and
hold Options.
To select the prediction input type, select Options > Prediction
options > Prediction type > Normal or Word suggestions.
1. Start writing a word using the 2 to 9 keys. Press each key only once
for one letter. The entered letters are displayed underlined.
If you selected Word suggestions as prediction type, the phone starts
to predict the word you are writing. After you enter a few letters, and
if these entered letters are not a word, the phone tries to predict
longer words. Only the entered letters are displayed underlined.
To insert a special character, press and hold *, or select Options >
Insert symbol. Scroll to a character, and select Use.
01/14/2009
FCC Draft
Messaging
24
To write compound words, enter the first part of the word; to confirm
it, press the scroll key right. Write the next part of the word and
confirm the word.
To enter a full stop, press 1.
2. When you finish writing the word and it is correct, to confirm it,
press 0 to add space.
If the word is not correct, press * repeatedly, or select Options >
Matches. When the word that you want appears, select the word.
If the ? character is displayed after the word, the word you intended
to write is not in the dictionary. To add the word to the dictionary,
select Spell. Complete the word (traditional text input is used), and
select Save.
■Traditional text input
To set traditional text input on, select Options > Prediction options >
Prediction > Off.
Press a number key, 1 to 9, repeatedly until the desired character
appears. Not all characters available under a number key are printed on
the key. The characters available depend on the selected writing
language.
If the next letter you want is located on the same key as the present one,
wait until the cursor appears.
The most common punctuation marks and special characters are
available under the 1 key. For more characters, press *.
7. Messaging
You can read, write, send and save text and multimedia messages,audio,
and flash messages. The messaging services can only be used if they are
supported by your network or service provider.
When sending messages, your phone may display the words Message
sent. This is an indication that the message has been sent by your device
to the message center number programmed into your device. This is not
an indication that the message has been received at the intended
01/14/2009
FCC Draft
Messaging
25
destination. For more details about messaging services, check with your
service provider.
■Text and multimedia messages
You can create a message and optionally attach, for example, a picture.
Your phone automatically changes a text message to a multimedia
message when a file is attached.
■Text messages
Your device supports the sending of text messages beyond the character limit for
a single message. Longer messages are sent as a series of two or more messages.
Your service provider may charge accordingly. Characters that use accents or
other marks and characters from some language options, such as Spanish, take
up more space, which limits the number of characters that can be sent in a single
message.
An indicator at the top of the display shows the total number of
characters left and the number of messages needed for sending.
Before you can send any text messages, you need to save your message
center number. Select Menu > Messaging > Messaging settings > Text
> Message centers > Add center, enter a name, and the number from the
service provider.
■Multimedia messages
A multimedia message can contain text, pictures, and sound or video
clips.
Only devices that have compatible features can receive and display multimedia
messages. The appearance of a message may vary depending on the receiving
device.
The wireless network may limit the size of MMS messages. If the inserted picture
exceeds this limit the device may make it smaller so that it can be sent by MMS.
Important: Exercise caution when opening messages. E-mail
messages may contain malicious software or otherwise be
harmful to your device or PC.
For availability and subscription to the multimedia service (MMS),
contact your service provider.
01/14/2009
FCC Draft
Messaging
26
Create a text or multimedia message
1. Select Menu > Messaging > Create message > Message.
2. To add recipients, scroll to the To: field, and enter the recipient’s
number or e-mail address, or select Add to select recipients from the
available options. Select Options to add recipients and subjects and
to set sending options.
3. Scroll to the Text: field, and enter the message text.
4. To attach content to the message, scroll to the attachment bar at the
bottom of the display and select the desired type of content.
5. To send the message, press Send.
The message type is indicated at the top of the display and changes
automatically depending on the content of the message.
Service providers may charge differently depending on the message
type. Check with your service provider for details.
Read a message and reply
Important: Exercise caution when opening messages. Messages may
contain malicious software or otherwise be harmful to your device or
PC.
Your phone issues a notification when you receive a message. Select
View to display the message. If more than one message was received, to
display a message, select the message from the Inbox and Open.
To create an answer message, select Reply.
Send messages
To send the message, select Send. The phone saves the message in the
Outbox folder and sending starts.
Note: The message sent icon or text on your device screen does
not indicate that the message is received at the intended
destination.
If the message sending is interrupted, the phone tries to resend the
message a few times. If these attempts failm the message remains in the
Outbox folder. To cancel the sending of the messages in the Outbox
folder, select Options > Cancel sending.
01/14/2009
FCC Draft
Messaging
27
To save the sent messages in the Sent items folder, select Menu >
Messaging > Message settings > General settings > Save sent messages.
Organize your messages
The phone saves received messages in the Inbox folder. Organize your
messages in the saved items folder.
To add, rename, or delete a folder select Menu > Messaging > Saved
items > Options.
■SmartChip messages
SmartChip messages are text messages that are saved to your
SmartChip card. You can copy or move those messages to the phone
memory, but not vice versa. Received messages are saved to the phone
memory.
To read SmartChip messages, select Menu > Messaging > Options >
SmartChip messages.
■Instant messaging
Instant messaging (IM) is a way to send short, simple text messages to
friends and family, regardless of the mobile system or platform they use
(like the internet), as long as they all use the same IM service. Check
with your service provider for availability.
Before you can use IM, you must subscribe to the service. To check the
availability and costs and to subscribe to the service, contact your
wireless service provider and the IM service provider from whom you
receive your unique ID, password, and settings.
Note: Depending on both your IM service provider and your
wireless service provider, you may not have access to all of the
features described in this guide.
Depending on the network, the active IM conversation may consume the
phone battery faster, and you may need to connect the phone to a
charger.
Register with an IM service
Before you can use IM, you must register with an IM service to obtain a
user name and password. You can obtain a user name and password by
01/14/2009
FCC Draft
Messaging
28
registering over the internet (using your computer) with the IM service
provider you have selected. During the registration process, you will
have the opportunity to create the user name and password of your
choice. For more information about signing up for IM services, contact
your wireless service provider.
Log in
1. Select Menu > Messaging > Instant messaging > and the service you
want to log into.
You must select the IM service every time you log in.
2. Enter your screen name and password if they are not already
displayed.
3. Select Options > Sign In.
Depending on your IM service, you may not need to enter your user
name and password manually every time you log in.
You can choose to save your password so you do not have to enter it
each time you sign in, or you can choose to log in automatically and skip
the log in window when you select the IM application. Scroll to Save
password or Automatic sign-in and select Mark.
Icons and menu items
Each IM service provider has its own unique interface, so the IM menu
items, display text, and icons on your phone may appear differently for
each IM service. If you have questions about the differences in the
various IM service providers’ text and icons, contact your wireless
service provider for more information.
IM menus
When you select IM from your phone menu, a list of available IM
services is displayed. Select the desired IM service to access the offline
menu options: Sign On, Saved Conversations, and Network settings.
Depending on the IM service provider you are using, these may not be
the exact menu items displayed.
After you log into IM, the following IM online options appear:
Conversations, Online contacts, and Offline contacts. Depending on the
01/14/2009
FCC Draft
Messaging
29
IM service provider you are using, these may not be the exact menu
items displayed.
Begin an IM session
You can send instant messages to anyone if you have the person’s user
name and you use the same IM service. As the conversation progresses,
the most recent message appears at the bottom of the window, causing
the previous messages to move up one level (some IM services may do
this in the opposite direction).
If you want to chat with a person, you must first add that person to
online contacts. See ”Contacts” on page 30.
To begin an IM session, do the following:
1. From the IM online menu, select a contact who is online.
2. A conversation window is opened, and the contact’s name is
displayed at the top.
3. Enter a message. When you finish the message, select Send.
Receive and reply to messages
If you have an active chat open and receive an instant message from the
contact or group member with whom you are chatting, the new
message is displayed on the conversation window in the sequence in
which they are received. Select Write to reply.
If you receive an instant message when you have the IM application
open, but do not have an active chat open, a message appears showing
you have a new instant message with the name of the sender. Select
Open to change the conversation window with that contact’s new
message displayed. To reply, select Write, enter a message, and select
Send.
If you receive an instant message when you are logged in to the IM
service, but do not have the IM application open on your phone, a
message is displayed telling you that a new IM message has been
received. Select Start to open the IM application, and view the new
message.
01/14/2009
FCC Draft
Messaging
30
Return to chat session
From the IM online menu, select Conversations. This list displays all IM
conversations and group chats in which you are currently participating.
To view a conversation or continue chatting, select a group name or
contact name.
Chat session options
You can save, view, rename, or delete a chat session.
To save a chat session, while you have the conversation open, select
Options> Save, edit the name if desired, and select Save.
To view a saved chat session, from the IM online menu, select Options >
Saved conversations. Scroll to the desired conversation name, and select
Open.
To rename a saved chat session, from the IM online menu, select
Options > Saved conversations. Scroll to the desired conversation name,
and select Options > Rename. Rename the conversation, and select OK.
To delete a saved chat session, from the IM online menu, select
Options > Saved conversations. Scroll to the desired conversation name,
and select Options > Delete > OK.
Set your availability
You can determine if other users can tell whether you are available or
not. From the IM online menu, highlight your name at the top of the
window, and select Options > My Status > Available, Invisible, or Busy.
Contacts
You can add the names of contacts with whom you interact frequently
by IM to the contacts list.
To add a new contact from the IM online menu, select Options > Add
Contact. Enter the contact’s user name for the IM service, and select OK.
Enter a nickname for the contact, and select OK.
To remove a contact from the IM online menu, select Online contacts or
Offline contacts. Scroll to the contact you wish to remove, and select
Options> Delete contact > OK.
01/14/2009
FCC Draft
Messaging
31
Log off service
From the IM online window, you can exit the IM application, but still be
connected to the IM service. Select Back until the IM online window
appears; then select Exit. If you open IM again, you do not need to log in
again.
You can receive instant messages and chat invitations from your
contacts when using your phone for other purposes, such as playing a
game. If you are connected to your IM service, but you have not used
your IM application for some time, you may be automatically
disconnected from the IM service. The next time you open the IM
application, you must log in again.
To disconnect from the IM service, you must log out from the online
window.
You are taken to the IM service provider list, where you can exit the IM
application or select an IM service and log in again.
From the IM online screen, select Sign Out > OK.
■Voice mail
If you subscribe to voice mail (network service), your service provider
furnishes you with a voice mailbox number. The number may be
populated in your phone during the activation process. If not, you need
to save this number to your phone to use voice mail. When you receive a
voice message, your phone lets you know by beeping, displaying a
message, or both. If you receive more than one message, your phone
shows the number of messages received.
To call your voice mailbox, in the standby mode, press and hold 1, or
select Menu > Messaging > Voice mail > Listen to voice mails. To enter,
find, or edit your voice mailbox number, select Voice mailbox number.
If supported by the network, indicates new voice messages. Select
Listen to call your voice mailbox number.
■Service commands
Use the service commands editor to enter and send service requests
(also known as USSD commands) to your service provider. Contact your
01/14/2009
FCC Draft
Messaging
32
service provider for information about specific service commands.
Select Menu > Messaging > Serv. commands.
■Delete messages
To delete messages one by one, select Menu > Messaging > Delete
messages > By message and the folder from which you want to delete
messages. Scroll to the message you want to delete, and select Delete.
To delete more than one message at the same time, scroll to one of the
messages you want to delete, and select Options > Mark. Scroll to each
additional message you want to delete, and select Mark; or to delete all
the messages, select Options > Mark all. When you have finished
marking the messages you want to delete, select Options > Delete
marked.
To delete all messages from a folder, select Menu > Messaging > Delete
messages > By folder and the folder from which you want to delete the
messages. Depending on the folder, the phone asks if you want to delete
the messages. To delete, select Yes. Otherwise, if the folder contains
unread messages or messages that are waiting to be sent, the phone
asks whether you want to keep them. To keep these messages, select
Yes.
To delete all messages from all folders, select Menu > Messaging >
Delete messages > All messages > Yes.
■Message settings
Select Select Menu > Messaging > Message settings and from the
following:
General settings — to save copies of sent messages in your phone, to
overwrite old messages if the message memory becomes fullm and to
set up other preferences related to messages.
Text messages — to allow delivery reports, to set up message centers for
SMS, to select the type of character support, and to set up other
preferences related to text messages.
Multimedia messages — to allow delivery reports, to set up the
appearance of multimedia messages, to allow the reception of
01/14/2009
FCC Draft
Cellular Video
33
multimedia messages and advertisements, and to set up other
preferences related to multimedia.
Service messages — to activate service messages and to set up
preferences related to service messages
8. Cellular Video
Placeholder for this feature.
9. YELLOWPAGES
In the standby mode, to access to the YELLOWPAGES website, select
Menu > YELLOWPAGES. YELLOWPAGES provides a directory of local
and national businesses, search options, maps, and directions.
If you have questions about billing or accessing this website, contact your
service provider.
10. My Stuff
In this menu, you can manage graphics, images, recordings, and tones,
which are files arranged in folders. This menu also includes multimedia
and entertainment features available in the phone, and features that
assist you in organizing daily tasks.
Your phone supports an activation key system to protect acquired
content. Always check the delivery terms of any content and activation
key before acquiring them, as they may be subject to a fee.
■Tones & Graphics
In the standby mode, select Menu > My Stuff > Tones & Graphics to
manage images, video clips, music files, themes, graphics, tones, audio,
and received files. You can store these files in the phone memory or an
attached microSD memory card. You can use folders to organize the
files.
01/14/2009
FCC Draft
My Stuff
34
The files stored in tones and graphics use the memory capacity of the
phone. You can use a compatible memory card to extend the memory
capacity to store images, themes, graphics, ringing tones, video clips,
and audio clips in tones and graphics.
To manage the files and folders, do the following:
1. Select Menu > My Stuff > Tones & Graphics. A list of folders is
shown. If a memory card is inserted in the phone, Memory card,
(unformat.) or the name of the memory card is shown.
2. Scroll to the folder you want. To view a list of files in the folder,
select Open. For the available options, select Options.
3. Scroll to the file you want to view, and select Open. For the available
options, select Options.
Format memory card
To format a new memory card, select Menu > My Stuff > Tones &
Graphics. Scroll to the memory card folder and select Options > Format
mem. card. See ”Memory card” on page 11.
■Games & Apps.
In the standby mode, select Menu > My Stuff > Games and Apps > to
manage applications and games. These files are stored in the phone
memory or an attached microSD memory card and may be arranged in
folders.
For options to format or lock and unlock the memory card, see ”Memory
card” on page 11.
Launch a game
Your phone software includes some games.
Select Menu > My Stuff > Games & apps > Games. Scroll to the desired
game, and select Open.
To set sounds, lights, and shakes for the game, select Menu > My Stuff >
Games and Apps . Scroll to Games and select Options > Application
settings. For more options, see ”Application options” on page 35.
01/14/2009
FCC Draft
My Stuff
35
Launch an application
Your phone software includes some Java applications.
Select Menu > My Stuff > Games and Apps > Application. Scroll to an
application, and select Open.
Application options
Update version — to check if a new version of the application is available
for download from web (network service)
MEdia net page— to provide further information or additional data for
the application from an internet page (network service), if available
App. access — to restrict the application from accessing the network
Download an application
Your phone supports J2ME Java applications. Make sure that the
application is compatible with your phone before downloading it.
Important: Only install and use applications and other software
from sources that offer adequate security and protection against
harmful software.
You can download new Java applications and games in different ways.
Use the Nokia Application Installer from PC Suite to download the
applications to your phone, or select Menu > My Stuff > Games & apps
> Options > Downloads > App. downloads; the list of available
bookmarks is shown. See”Bookmarks” on page 35.
For the availability of different services and pricing, contact your service
provider.
Your device may have preinstalled bookmarks and links for third-party
internet sites. You may also access other third-party sites through your
device. Third-party sites are not affiliated with Nokia, and Nokia does
not endorse or assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
■Multimedia
From the standby mode, select Menu > My Stuff > Multimedia to
access multimedia and entertainment features available in the phone.
01/14/2009
FCC Draft
My Stuff
36
Camera
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others, including copyrights.
You can take photos or record live video clips with the built-in 2 megapixel with
4x zoom camera.
The camera produces pictures in jpeg format and video clips in 3gpp
format. The camera lens is on the front of the phone. The color display
works as a viewfinder.
Take a photo
1. Select Menu > My Stuff > Multimedia > Camera > Capture; or
press the camera key, and select Capture.
The phone saves the photo in Menu > My Stuff > Tones & Graphics >
Images unless you set the phone to use the memory card to save
photos.
2. To take another photo, select Back.
3. To zoom in or out, scroll up or down.
4. To take several photos in quick succession, select Options > Img.
sequence on > Sequen. To take another photo, select Options >
New image. To take a single image, select Options > Img. sequence
off.
The higher the resolution, the fewer photos you can take
sequentially.
5. To send the photo as a multimedia message, select Send.
6. To set a timer to delay capturing a photo for 10 seconds, select
Options > Self-timer on > Start.
A beep sounds while the self-timer is running. It beeps faster when
the camera is about to capture the photo. After the time-out, the
camera takes the photo and saves the photo in Menu > My Stuff >
Tones & Graphics > Images.
To take a photo when the lighting is dim, the camera automatically
adjusts a longer exposure time so the photo quality is better.
01/14/2009
FCC Draft
My Stuff
37
This Nokia device supports an image capture resolution up to 1024 x
1280 pixels. The image resolution in these materials may appear
different.
Self-portrait
To take a self-portrait photo, select Menu > My Stuff > Multimedia >
Camera and close the fold. To take a picture, press the PTT key. To view
the photo, open the fold.
Record a video clip
Select Menu > My Stuff > Multimedia > Video recorder > Record. To
pause recording, select Pause; to resume recording, select Continue. To
stop recording, select Stop. The phone saves the recording in Menu >
My Stuff > Open Tones & Graphics > Video clips or a folder in the
memory card. To view the options, select Options.
Camera and video settings
Select Menu > My Stuff > Multimedia > Camera or Video recorder >
Options > Settings and edit the available settings.
Camera and video effects
Select Menu >My Stuff > Multimedia > Camera or Video recorder>
Options > Effects and one of the available options.
Media player
Your phone includes a music player for listening to music tracks,
recordings, or MP3, MP4, WMA (Windows Media Audio), aac, aac+, or
eaac+ sound files that you have transferred to the phone with the Nokia
Music Manager application. Music files are automatically detected and
added to the default track list.
Play music tracks
1. Select Menu > My Stuff > Multimedia > Media player > Go to Media
player. The details of the first track on the default track list are
shown.
2. To play a track, scroll to the track, and select .
3. To skip to the beginning of the next track, select . To skip to the
beginning of the previous track, select once.
01/14/2009
FCC Draft
My Stuff
38
4. To rewind the current track, select and hold . To fast forward the
current track, select and hold . Release the key at the position you
want.
5. To pause the playing, select .
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Options in Media player
In the music player menu, music tracks can be saved in the following
categories:
All songs — to view all music tracks
Playlists — to create new playlists, check the currently playing music,
view recently added playlists or tracks, find the tracks played most
often, and view all playlists
Artists — to view all music tracks by the artist’s name
Albums — to view music tracks by albums
Genres — to view music tracks by genres
Videos — to view a list of music videos
Settings
To change settings, select Menu > My Stuff > Multimedia > Media
player > Go to Media player > Options > Settings and choose from the
following:
Shuffle — to play music tracks in random order
Repeat — to repeat the current song, all songs, or to turn off repeat
Equalizer — to open the list of media equalizer sets. See ”Equalizer” on
page 40.
Music player theme — to select the theme or skin of the music player
Other options
Go to Music menu — to go to the main music menu
Now playing — to view the track currently playing
01/14/2009
FCC Draft
My Stuff
39
Add to playlist— to add the current song to the favorites track list.
Downloads — to download music through web.
MEdia Net page — to go to MEdia Net
Mute audio — to mute the audio
Play via Bluetooth — to connect and play music through a Bluetooth
enabled audio accessory using Bluetooth connection
Voice recorder
You can record pieces of speech, sound, or an active call. This is useful
when recording a name and phone number for writing them down later.
Record sound
1. Select Menu > My Stuff > Multimedia > Voice recorder.
2. To start recording, select . To start recording during a call, select
Options > Record. While recording a call, all parties to the call hear a
faint beeping sound. When recording a call, hold the phone in the
normal position near to your ear.
3. To stop recording, select .
The recording is saved in Menu > My Stuff > Tones & Graphics >
Audio.
4. To listen to the latest recording, select Options > Play last recorded.
5. To send a recording using Bluetooth or as a multimedia message,
scroll to the recording and select Options > Send.
List of recordings
1. Select Menu > My Stuff > Multimedia > Voice recorder > Options >
Audio list.
The list of folders in tones and graphics is shown.
2. Open Audio to see the list with recordings.
3. Select Options to view a list of options for files.
01/14/2009
FCC Draft
My Stuff
40
Define a storage folder
To use a folder (other than audio) as the default folder in tones and
graphics., select Menu > My Stuff > Multimedia > Voice recorder >
Options > Select memory and a folder from the list.
Equalizer
To control the sound quality when using the music player by amplify or
diminish frequency bands.
Select Menu > My Stuff > Multimedia > Equalizer.
To activate a set, scroll to one of the equalizer sets, and select Activate.
To view, edit, rename, and select your own settings, select Set 1 or Set 2
> Options > Edit, or Rename. Only Set 1 and Set 2 can be edited or
renamed.
■Tools
Your Nokia mobile phone has many useful features for organizing your
everyday life. The following features are found in tools: alarm clock,
calendar, to-do list, notes, calculator, countdown timer, and stopwatch.
Push to Talk
Select > Games&Apps > PTT.
Push to Talk (PTT) is a two-way radio service available over a GSM cellular
network (network service).
You can use PTT to have a conversation with one person or with a group of people
having compatible devices and service. While you are connected to the PTT
service, you can use the other functions of the phone.
To check availability and costs, and to subscribe to the service, contact
your network operator. Service availability may differ from that for
normal calls. Visit wireless.att.com/ptt for additional information.
Before you can use the PTT service, you must define the required PTT
service settings. Select > Games&Apps > PTT and from the following:
Set your name — to set how your PTT name appears to your contacts and groups
Auto accept — to set the phone to automatically accept invitations from other
PTT users
PTT Is: On — to switch the PTT service on
01/14/2009
FCC Draft
My Stuff
41
Always switch PTT off before switching the phone off or removing the battery.
PTT options
Select >PTT > Games&Apps > PTT Contacts > Options and from the
following:
My availability — to set your PTT status to Available or Do Not Disturb
Voice message — to send a voice message to a contact
Call me alert — to send a notification to a contact
Quick group — to mark contacts to create a quick group
New message — to send a text message to a contact
Switch PTT on and off
To disconnect from the PTT service, select > Games&Apps > PTT > PTT
Is: On and select Offline
To connect to the PTT service, select > Games&Apps > PTT. If you have
added groups to the phone, you are automatically joined to the active
groups. There may be a brief delay while PTT connects.
Connection indicators
These indicators appear on the standby screen below the battery indicator if
active idle is turned off. When active idle is turned on, the PTT indicator is below
or to the right of the active idle navigation bar.
PTT is connected: your status is Available
Service is disconnected
Information is waiting
Your status is Do Not Disturb
Add contacts
You can add individual contacts or create contact groups to call several
people at once.
Add a one-to-one contact
To add a contact to the PTT contacts list, select > Games&Apps >
PTT > Add contact. Enter the name and telephone number of the new
contact. An invitation is sent to the person.
01/14/2009
FCC Draft
My Stuff
42
Add a contact group
You can save a group of contacts so you can call them collectively.
To add a PTT contact group, select > Games&Apps > PTT > Add group
and name the group.
To add an existing contact to the group, select From PTT contacts and
mark the contacts you want added to the new group.
To add a new contact to the group manually, enter the name and telephone
number of the new contact. An invitation is sent to the person.
Make and receive a PTT call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
To make a group call, a one-to-one call, or a call to multiple recipients, you must
hold the PTT key as long as you talk. To listen to the response, release the PTT key.
You can check the login status of your contacts in > Games&Apps >
PTT > PTT Contacts. To add a contact, select > PTT > Add contact. See
”Add a one-to-one contact” on page 41 for more information.
Contact status indicators
These indicators appear next to your contacts and provide information about
their connection status.
Contact is available
Contact is available with phone set to vibrate or silent
Do not disturb; you cannot contact this person
Invitation is in progress; you cannot contact this person
Contact has PTT switched off; you cannot contact this person
Make a one-to-one call
To start a one-to-one call from the list of contacts to which you have
added the PTT telephone number, select > PTT > Games&Apps > PTT
Contacts. Scroll to a contact, and press and hold the PTT key while
talking. Remember that you must release the PTT key to receive their
reply.
01/14/2009
FCC Draft
My Stuff
43
To start a one-to-one call from the list of PTT groups, select PTT
Contacts, scroll to the desired group, and select View. Scroll to the
desired contact, and press and hold the PTT key while talking.
Make a group call
To make a call to a group, select PTT Contacts in the PTT menu, scroll to
the desired group, and press and hold the PTT key while talking.
Make a PTT call to multiple recipients
To select multiple PTT contacts from the contact list, create a Quick Group. The
recipients receive an incoming call. If a recipients phone is set to silent or vibrate,
they must accept the call in order to participate.
1. Select > Games&Apps > PTT > PTT Contacts and mark the desired
contacts. The Quick Group is automatically created.
2. Press and hold the PTT key to start the call. The group name is shown on the
display, as soon as members join the call.
3. Press and hold the PTT key to talk to them. Release the PTT key to hear
the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call. Information, such as the group,
the phone number, or the nickname of the caller are displayed.
You can either accept or reject an incoming one-to-one call if you have set the
phone to silent or vibrate.
When you press and hold the PTT key while the caller is talking, you hear a queuing
tone. Release the PTT key, and wait for the other person to finish; then you can
press and hold the PTT key and begin talking.
Change from PTT to mobile call
You can convert a one-to-one or group PTT call to a standard mobile call
if you initiated the PTT call. Anytime during the PTT call select Options >
Convert to Cellular. The call recipient(s) can then join your mobile call by
pressing the PTT key.
Call Me Alerts
If you make a one-to-one call and do not get a response, you can send a
request for the person to call you back.
01/14/2009
FCC Draft
My Stuff
44
Send a Call Me Alert
You can send a Call Me Alert in the following ways:
To send a Call Me Alert from the contacts list in the PTT menu, select PTT
Contacts. Scroll to a contact, and select Options > Call me alert.
To send a Call Me Alert from the group list in the PTT menu, select PTT
Contacts, and scroll to the desired group. Select Options > Call me alert.
The alert is sent only to members logged in to PTT.
Respond to a Call Me Alert
When someone sends you a Call Me Alert, Please call is displayed with
the caller’s name in the standby mode.
To call the sender, press and hold the PTT key.
To send a Call Me Alert to the sender, select Options > Call me alert.
Voice messages
You can send a voice message to one of your PTT contacts or groups.
From the PTT Contacts menu, select the individual or group to receive
the voice message. Select Options > Voice message. Push and hold the
PTT key while speaking. Release the PTT key to deliver the message.
Log
Access the PTT log from the PTT Main Menu or by pressing and holding
the PTT key while in idle view. The log displays records of your PTT calls.
While in this view, you can filter and delete log information or make PTT
calls.
Alarm clock
The alarm clock uses the time format set for the clock. The alarm clock
works even when the phone is turned off if there is enough power in the
battery.
To set the alarm, select Menu > My Stuff > Tools > Alarm clock > Alarm
time and enter the alarm time. To change the alarm time when the
alarm time is set, select On. To set the phone to alert you on selected
days of the week, select Repeat alarm.
To set a snooze time-out, select Snooze time-out and the time you
want.
01/14/2009
FCC Draft
My Stuff
45
After making changes to the alarm settings, scroll to the bottom of the
menu and select Save.
Alert tone and message
The phone sounds an alert tone and flashes Alarm! and the current time
on the display, even if the phone is switched off. To stop the alarm,
select Stop. If you let the phone continue to sound the alarm for a
minute or select Snooze, the alarm stops for the selected snooze
time-out and then resumes.
If the alarm time is reached while the device is switched off, the device switches
itself on and starts sounding the alarm tone. If you select Snooze, the device
switches off, then switches on again after the snooze time is reached. If you
select Stop, the device asks whether you want to activate the device for calls.
Select No to switch off the device or Yes to make and receive calls. Do not select
Yes when wireless phone use may cause interference or danger.
Recent Calls
The phone logs the phone numbers of identified missed, received, and
dialed calls, and the approximate length of your calls. The phone
registers missed and received calls only if the network supports these
functions and the phone is turned on and within the network’s service
area.
To view the information on your calls, select Menu > My Stuff > Tools >
Recent Calls > All calls > Missed calls, Calls received, or Calls made. To
view your recent missed and received calls and the calls made
chronologically, select All calls. To view the contacts to whom you most
recently sent messages, select Msg. recipients.
To view the approximate information on your recent communications,
select Menu > My Stuff > Tools > Recent Calls > Call time, Data
counter, Pack. data timer, or Data transfer.
To view how many text and multimedia messages you have sent and
received, select Menu > My Stuff > Tools > Recent Calls > Message log.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes,
and so on.
01/14/2009
FCC Draft
My Stuff
46
Note: Some timers may be reset during service or software upgrades.
Calendar
The calendar helps you keep track of reminders, calls that you need to
make, meetings, and birthdays.
Select Menu > My Stuff > Tools > Calendar.
The current day is indicated by a frame in the month view. If there are
any notes set for the day, the day is in bold type. To view the day notes,
select View. To view a week, select Options > Week view. To delete all
notes in the calendar, select the month or week view and Options >
Delete all notes.
Other options for the calendar day view are make a note; delete, edit, or
move a note; copy a note to another day; send a note with Bluetooth
wireless technology; or send a note as a text message or multimedia
message to the calendar of another compatible phone. Select Settings,
to set the date and time. Select Auto-delete notes, to set the phone to
delete old notes automatically after a specified time.
Make a note
Select Menu > My Stuff > Tools > Calendar, the date you want, and
Options > Make a note, and one of the following note types:
Meeting, Call, Birthday, Memo or Reminder.
Note alarm
The phone beeps and displays the note. If a call note appears, to call the
displayed number, press the call key. To stop the alarm and to view the
note, select View. To stop the alarm for 10 minutes, select Snooze. To
stop the alarm without viewing the note, select Exit.
To-do list
To save a note for a task that you have to do, select a priority level for
the note, and mark it as done when you have completed it. Notes can be
sorted by priority or by date.
To-do notes
1. Select Menu > My Stuff > Tools > To-do list.
01/14/2009
FCC Draft
My Stuff
47
2. If no note is added, select Add note; otherwise, select Options >
Add.
3. Write the note, select the priority, set the deadline and the alarm
type for the note, and select Save.
4. To view a note, scroll to it, and select View.
Notes
Select Notes to write and send notes to compatible devices by using text
messaging or MMS.
1. Select Menu > My Stuff > Tools > Notes.
2. To make a note if one is not added, select Add note; otherwise, select
Options > Make a note.
3. Write the note, and select Save.
4. To view a note, scroll to it, and select View.
Calculator
The calculator in your phone provides basic arithmetic and
trigonometric functions; calculates the square, the square root, and the
inverse of a number; and converts currency values.
Note: This calculator has limited accuracy and is designed for simple
calculations.
Select Menu > My Stuff > Tools > Calculator. Press # for a decimal
point. Scroll to the desired operation or function, or select it from
Options.
To save the exchange rate, select Options > Exchange rate. To perform
the currency conversion, enter the amount to be converted and select
Options > Foreign unit in domestic units or Domestic unit in foreign
units.
Timer
1. Select Menu > My Stuff > Tools > Timer > Normal timer; enter the
alarm time in hours, minutes, and seconds; and select OK.
You can write your own note text, which is displayed when the time
expires.
01/14/2009
FCC Draft
Address Book
48
2. To start the timer, select Start.
3. To change the countdown time, select Change time.
4. To stop the timer, select Stop timer.
If the alarm time is reached when the phone is in the standby mode, the
phone sounds a tone and flashes the note text (if it is set) or Countdown
completed. To stop the alarm press any key. If no key is pressed, the
alarm automatically stops within 60 seconds. To stop the alarm and to
delete the note text, select Exit. To restart the countdown timer, select
Restart.
Stopwatch
Select Menu > My Stuff > Tools > Stopwatch to measure time, take
intermediate times, or take lap times using the stopwatch. During
timing, the other functions of the phone can be used. To set the
stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using
other features increases the demand on battery power and reduces the
battery life.
11. Address Book
In the address book, you can store and manage contact information,
such as names, phone numbers, and addresses. You can save names and
numbers in the internal memory of the phone, the SmartChip card
memory, or in a combination of the two. Names and numbers saved in
the SmartChip card memory, are indicated by .
■Find a contact
Select Menu > Address Book > Names, and scroll through the list of
contacts, or enter the first letter of the name you are trying to find.
■Save names and phone numbers
Names and numbers are saved in the used memory. Select Menu >
Address Book > Names > Options > Add new contact. Enter the last
name, first name, and phone number, and select Save.
01/14/2009
FCC Draft
Address Book
49
■Save numbers, items, or an image
In the phone memory for contacts, you can save different types of phone
numbers and short text items per name. You can also assign a ringing
tone to a contact.
The first number you save is automatically set as the default number
and it is indicated with a frame around the number type indicator (for
example, ). When you select a name, the default number is used
unless you select another number.
1. Make sure that the memory in use is either Phone or Phone and
SmartChip. See ”Settings” on page 50.
2. Scroll to the name to which you want to add a new number or text
item and select Details > Options > Add detail.
3. To add a number, select Number and one of the number types.
4. To add another detail, select a text type, an image from tones and
graphics, or a new image.
5. To change the number type, scroll to the number you want, and
select Options > Change type. To set the selected number as the
default number, select Set as default.
6. Enter the number or text item. To save it, select Save.
7. To return to standby mode, select Back > Exit.
■Copy contacts
To copy a name and phone number from the phone memory to the
SmartChip card memory, or vice versa, select Menu > Address book >
Names > Options > Copy contact. To move all contacts from the
SmartChip card to phone memory, or vice versa, select Menu > Address
book > Move contacts or Copy contacts > From phone to SmartChip or
From SmartChip to phone. To copy more than one contact, but not all
contacts, select Menu > Address book > Names > Options > Mark.
Scroll and mark the contacts you want to move, and select Move marked
or Copy marked.
01/14/2009
FCC Draft
Address Book
50
■Edit contact details
1. Find the contact you want to edit, select Details; and scroll to the
name, number, text item, or image you want.
2. To edit a name, number, or text item, or to change image, select
Options > Edit.
You cannot edit an ID when it is on the IM contacts or subscribed
names list.
■Delete contacts or details
To delete all the contacts and the details attached to them from the
phone or SmartChip card memory, select Menu > Address Book > Delete
all contacts > From phone memory or From SmartChip. Confirm with the
security code.
To delete a contact, find the contact you want, and select Options >
Delete contact.
To delete a number, text item, or an image attached to the contact, find
the contact, and select Details. Scroll to the desired detail, and select
Options > Delete > Delete number, Delete detail, or Delete image.
Deleting an image from contacts does not delete it from My Stuff.
■Business cards
You can send and receive a person’s contact information from a
compatible device that supports the vCard standard as a business card.
To send a business card, find the contact whose information you want to
send and, select Details > Options > Send business card >Via
multimedia, Via text message, or Via Bluetooth.
When you have received a business card, select Show > Save to save the
business card in the phone memory. To discard the business card, select
Exit > Yes.
■Settings
Select Menu > Address Book > Settings and one of the following
options:
01/14/2009
FCC Draft
Address Book
51
Memory in use — to select the SmartChip card or phone memory for your
contacts. Select Phone and SmartChip to recall names and number from
both memories. In that case, when you save names and numbers, they
are saved in the phone memory.
Address book view — to select how the names and numbers in Address
Book are displayed
Name display — to select whether the contact’s first or last name is
displayed first
Font size — to set the font size for the list of contacts
Check memory — to view the free and used memory capacity
■Groups
To arrange the names and phone numbers saved in the memory into
caller groups with a different ringing tone and a group image, select
Menu > Address Book > Groups > Add. Choose a name, image, ringing
tone, and select Save. To add contacts to the group, select View > Add.
Scroll to the first contact you want to add and press Select. Select Add
and scroll to the next contact and press Select until all members are
selected. To delete a member, select Options > Remove member.
■Speed dial list
To assign a number to a speed dialing key, select Menu > Address
Book > Speed dial list, and scroll to the speed-dialing number that you
want.
Select Assign or, if a number has already been assigned to the key,
select Options > Change. Select Find and the contact you want to
assign. If the speed dialing function is off, the phone asks whether you
want to activate it.
To make a call using speed dialing, see ”Speed dialing” on page 20.
■Service and my numbers
Select Menu > Address Book and one of the following options:
Service numbers — to call the service numbers of your service provider, if
the numbers are included on your SmartChip card (network service)
01/14/2009
FCC Draft
Settings
52
My numbers — to view the phone numbers assigned to your SmartChip
card. This is only shown if the numbers are included on your SmartChip
card.
12. Settings
■Set profiles
Your phone has various settings groups called profiles, for which you
can customize the phone tones for different events and environments.
Select Menu > Settings > Set profile, and the desired profile and from
the following options:
Activate — to activate the selected profile
Customize — to customize the profile. Select the setting you want to
change, and make the changes.
Timed — to set the profile to be active until a certain time up to
24 hours, and set the end time. When the time set for the profile expires,
the previous profile that was not timed becomes active.
■Set theme
A theme contains elements for personalizing your phone.
Select Menu > Settings > Set theme and from the following options:
Select theme — to set a theme. A list of folders in tones and graphics
opens. Open the Themes folder, and select a theme.
Themes — to open a list of links to download more themes
■Tones
You can change the tone settings of the selected active profile.
Select Menu > Settings > Tones, or select Set profile to find the same
settings.
To set the phone to ring only for calls from phone numbers that belong
to a selected caller group, select Alert for. Scroll to the caller group you
want or All calls, and select Mark.
01/14/2009
FCC Draft
Settings
53
Select Options > Save to save the settings or Cancel to leave the
settings unchanged.
If you select the highest ringing tone level, the ringing tone reaches its highest
level after a few seconds.
■Lights
To activate or deactivate light effects associated with different phone
settings, select Menu > Settings > Lights.
■Display
Select Menu > Settings > Display and from the available options:
Wallpaper — to add the background image in the standby mode
Home screen — to switch the active home screen mode on or off and to
organize and personalize the active home screen mode.
Home screen font col. — to select the color for the texts in the home
screen mode
Navigation key icons — to display the icons of the current navigation key
shortcuts in the home screen mode when active home screen is off
Notification details— to display contact information in missed calls and
messages received.
Fold animation — to set your phone to display an animation when you
open and close the phone
Screen saver — to select a screen saver or turn off the screen saver
Font size — to set the font size for messaging, contacts and web pages
Operator logo — to set your phone to display or hide the operator logo
■Set time and date
To change the time, time zone, and date settings, select Menu >
Settings > Set time/date > Date & time settings, Date and time format,
or Auto-update of time (network service).
When traveling to a different time zone, select Menu > Settings > Set
time/date > Date & time settings > Time zone and the time zone of your
location in terms of the time difference with respect to Greenwich Mean
Time (GMT) or Universal Time Coordinated (UTC). The time and date are
01/14/2009
FCC Draft
Settings
54
set according to the time zone and enable your phone to display the
correct sending time of received text or multimedia messages. For
example, GMT -5 denotes the time zone for New York (USA), 5 hours
west of Greenwich/London (UK).
■My shortcuts
With personal shortcuts you get quick access to often used functions of
the phone.
Left selection key
To select a function from the list, select Menu > Settings > My
shortcuts > Left selection key.
In the home screen mode, select Options > Options and from the
following options:
Select options — to add a function to the shortcut list or to remove one
Organize — to rearrange the functions on your personal shortcut list
Right selection key
To select a function from the list, select Menu > Settings > My
shortcuts > Right selection key.
Navigation key
To assign other phone functions from a predefined list to the navigation
key (scroll key), select Menu > Settings > My shortcuts > Navigation
key.
Home screen key
To select a navigation key to activate the active home screen mode,
select Menu > Settings > My shortcuts > Home screen key.
■Sync and backup
Select Menu > Settings > Sync and backup and from the following:
Phone switch— to copy files to another phone
Data transfer— to move files from your phone to PC
01/14/2009
FCC Draft
Settings
55
■Connectivity
You can connect the phone to a compatible device using a Bluetooth
wireless technology or a USB data cable connection. You can also define
the settings for EGPRS or 3G dial-up connections.
Bluetooth wireless technology
This device is compliant with Bluetooth Specification 2.1 + EDR supporting the
following profiles: Advanced Audio Distribution Profile (A2DP), Audio/Visual
Remote Control Profile (AVRCP), Basic Imaging Profile (BIP), Dial-Up Network
Profile (DUN), File Transfer Profile (FTP), Generic Audio/Video Distribution Profile
(GAVDP), Generic Object Exchange Profile (GOEP), Hands-free Profile (HFP),
Headset Profile (HSP), Object Push Profile (OPP), SIM Access Profile (SAP), and
Service Discovery Application Profile (SDAP). To ensure interoperability between
other devices supporting Bluetooth technology, use Nokia approved
enhancements for this model. Check with the manufacturers of other devices to
determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduce the battery life.
Bluetooth technology allows you to connect the phone to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using
Bluetooth technology communicate using radio waves, your phone and
the other devices do not need to be in direct line-of-sight, although the
connection can be subject to interference from obstructions such as
walls or from other electronic devices.
Set up a Bluetooth connection
Select Menu > Settings > Connectivity > Bluetooth and from the
following options:
Bluetooth > On or Off — to activate or deactivate the Bluetooth
function. indicates that Bluetooth is activated. When activating
Bluetooth technology for the first time, you are asked to give a name for
the phone. Use a unique name that is easy for others to identify.
01/14/2009
FCC Draft
Settings
56
My phone's visibility — to select how your phone’s visibility to other
devices.
Search audio enhanc. — to search for compatible Bluetooth audio
devices. Select the device that you want to connect to the phone.
Active devices — to view a list of active devices to which you have an
active connection
Paired devices — to search for any Bluetooth device in range. Select New
to list any Bluetooth device in range. Select a device, and Pair. Enter an
agreed Bluetooth passcode of the device (up to 16 characters) to
associate (pair) the device to your phone. You must only give this
passcode when you connect to the device for the first time. Your phone
connects to the device, and you can start data transfer.
My phone's name — to change the name of your phone, which is visible
to other bluetooth devices.
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth. To check which
Bluetooth connection is currently active, select Active devices. To view a
list of Bluetooth devices that are currently paired with the phone, select
Paired devices.
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select
Menu > Settings > Connectivity > Bluetooth > My phone's visibility or
My phone's name.
If you are concerned about security, turn off the Bluetooth function, or select
My phone's visibility > Hidden. Always accept only Bluetooth communication
from others with whom you agree.
Packet data
General packet radio service (GPRS) or 3G are network services that
allow mobile phones to send and receive data over an internet protocol
(IP)-based network.
01/14/2009
FCC Draft
Settings
57
To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data conn. and from the following
options:
When needed — to set the packet data connection to established when
an application needs it. The connection is closed when the application is
terminated.
Always online — to set the phone to automatically connect to a packet
data network when you switch the phone on
Modem settings
You can connect the phone using Bluetooth wireless technology or USB
data cable connection to a compatible PC and use the phone as a
modem to enable GPRS 0r 3G connectivity from the PC.
To define the settings for connections from your PC, select Menu >
Settings > Connectivity > Packet data > Packet data settings > Active
access point, and activate the access point you want to use. Select Edit
active access pt. > Packet data acc. pt., enter a name to change the
access point settings, and select OK. Select Packet data acc. pt., enter
the access point name (APN) to establish a connection to an network,
and select OK.
You can also set the EGPRS dial-up service settings (access point name)
on your PC using the Nokia Modem Options software. See ”Nokia PC
Suite” on page 64. If you have set the settings both on your PC and on
your phone, the PC settings are used.
Data transfer
Synchronize your calendar, contacts data, and notes with another
compatible device (for example, a mobile phone), a compatible PC, or a
remote Internet server (network service).
Your phone allows data transfer with a compatible PC or another
compatible device when using the phone without a SmartChip card.
Transfer contact list
To copy or synchronize data from your phone, the name of the device
and the settings must be in the list of transfer contacts. If you receive
data from another device (for example, a compatible mobile phone), the
01/14/2009
FCC Draft
Settings
58
corresponding transfer contact is automatically added to the list, using
the contact data from the other device. Server sync and PC
synchronization are the original items in the list.
To add a new transfer contact to the list (for example a mobile phone),
select Menu > Settings > Connectivity > Data transfer > Options > Add
transfer contact > Phone synchronization or Phone copy, and enter the
settings according to the transfer type.
To edit the copy and synchronize settings, select a contact from the
transfer contact list and Options > Edit.
To delete a transfer contact, select it from the transfer contact list,
select Options > Delete.
Data transfer with a compatible device
For synchronization use Bluetooth wireless technology or a cable
connection. The other device must be activated for receiving data.
To start data transfer, select Menu > Settings > Connectivity > Data
transfer and the transfer contact from the list, other than Server sync or
PC synchronisation. According to the settings, the selected data is
copied or synchronized.
Synchronize from a compatible PC
To synchronize data from calendar, notes, and contacts, install the
Nokia PC Suite software for your phone on the PC. Use Bluetooth
wireless technology or a USB data cable for the synchronization, and
start the synchronization from the PC.
Synchronize from a server
To use a remote internet server, subscribe to a synchronization service.
For more information and the settings required for this service, contact
your service provider. You may receive the settings as a configuration
message. See ”Configuration settings service” on page 8 and
”Configuration” on page 61.
To start the synchronization from your phone, select Menu > Settings >
Connectivity > Data transfer > Server sync. Depending on the settings,
select Initializing syn-chronisation or Initialising copy.
01/14/2009
FCC Draft
Settings
59
Synchronizing for the first time or after an interrupted synchronization
may take up to 30 minutes to complete.
USB data cable
You can use the CA-101 USB data cable to transfer data between the
phone and a compatible PC. You can also use the USB data cable with
Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the
data cable. Confirm USB data cable connected. Select mode. and select
from the following options:
Nokia mode — to use the phone to interact with applications on a PC
that has Nokia PC Suite
Music sync — to connect the phone to a PC to synchronize it with
Windows Media Player (music, video)
Data storage — to connect to a PC that does not have Nokia software
and use the phone as a data storage
To change the USB mode, select Menu > Settings > Connectivity > USB
data cable > Nokia mode, Music sync , or Data storage.
■Call settings
Select Menu > Settings > Call settings and from the following options:
Call forwarding — to forward your incoming calls (network service). You
may not be able to forward your calls if some call restriction functions
are active. See Call restrictions in ”Security” on page 62.
Anykey answer > On — to answer an incoming call by briefly pressing
any key, except the power key, the camera key, the left and right
selection keys
Automatic redial > On — to make a maximum of 10 attempts to connect
the call after an unsuccessful call attempt
Speed dialing > On — to dial the names and phone numbers assigned to
the speed-dialing keys 2 to 9 by pressing and holding the corresponding
number key
01/14/2009
FCC Draft
Settings
60
Call waiting > Activate — to have the network notify you of an incoming
call while you have a call in progress (network service). See ”Call
waiting” on page 21.
Summary after call > On — to briefly display the approximate duration
and cost (network service) of the call after each call
Send my caller ID > Yes — to show your phone number to the person you
are calling (network service). To use the setting agreed upon with your
service provider, select Set by network.
Answ. if fold opened > On — to answer an incoming call by opening the
fold
■Phone settings
Select Menu > Settings > Phone settings and from the following
options:
Language settings — to set the display language of your phone, select
Phone language. Automatic selects the language according to the
information on the SmartChip card. To set a language for the voice
playback, select Recognition lang. See ”Enhanced voice dialing” on page
20 and Voice commands in ”My shortcuts” on page 54.
Check memory — to view the amount of used and available phone
memory
Automatic keyguard — to set the keypad of your phone to lock
automatically after a preset time delay when the phone is in the standby
mode and no function of the phone has been used. Select On, and set
the time.
Security keyguard — to set the phone to ask for the security code when
you unlock the keyguard. Enter the security code, and select On.
Software updates — to update phone software or check the current
software
Help text activation — to select whether the phone shows help texts
Start-up tone > On — the phone plays a tone when switched on
Switch off tone > On — the phone plays a tone when switched off
01/14/2009
FCC Draft
Settings
61
Fold close handling — to select whether to return to standby mode or
keep all applications open when the fold is closed
Voice recognition — to set up voice commands or to start voice
recogntion training.
Offline mode query > On — the phone asks whether to use the offline
profile every time when switched on. With the offline profile all radio
connections are switched off. The offline profile should be used in areas
sensitive to radio emissions.
■Accessories
This menu or the following options are shown only if the phone is or has
been connected to a compatible mobile enhancement.
Select Menu > Settings > Accessories. Select an accessory, and from
corresponding options:
TTY/TDD — to set the phone on or off for TTY/TDD communication
Charger > Default profile — to select the profile that you want to be
automatically activated when you connect to the selected enhancement
Charger > Lights—to set the lights permanently on. Select Automatic to
set the lights on for 15 seconds after a keypress.
Hearing aid > T-coil hrng. aid mode > On to optimize the sound quality
when using a t-coil hearing aid. is shown when the T-coil hearing aid
mode is active.
Headphones — to select the activated profile when a headset in
connected.
■Configuration
You can configure your phone with settings required for certain services
to function correctly. Your service provider may also send you these
settings. See ”Configuration settings service” on page 8.
Select Menu > Settings > Configuration and from the following
options:
Default config. sett. — to view the service providers saved in the phone.
To set the configuration settings of the service provider as default
settings, select Options > Set as default.
01/14/2009
FCC Draft
Settings
62
Act. def. in all apps. — to activate the default configuration settings for
supported applications
Preferred access pt. — to view the saved access points. Scroll to an
access point, and select Options > Details to view the name of the
service provider, data bearer, and packet data access point or GSM
dial-up number.
Connect to support — to download the configuration settings from your
service provider
Device manager sett. — to select when to allow service software updates
Personal config. sett. — to add new personal accounts for various
services manually, and to activate or delete them. To add a new personal
account if you have not added any, select Add; otherwise, select
Options > Add new. Select the service type, and select and enter each of
the required parameters. The parameters differ according to the selected
service type. To delete or activate a personal account, scroll to it, and
select Options > Delete or Activate.
■Security
When security features that restrict calls are in use (such as call restriction and
fixed dialing) calls still may be possible to the official emergency number
programmed into your device.
Select Menu > Settings > Security and from the following options:
PIN code request — to set the phone to ask for your PIN code every time
the phone is switched on. Some SmartChip cards do not allow the code
request to be turned off.
Call restrictions — to restrict incoming calls to and outgoing calls from
your phone (network service). A restriction password is required.
Fixed dialing — to restrict your outgoing calls to selected phone
numbers if this function is supported by your SmartChip card. When the
fixed dialing is on, GPRS connections are not possible except while
sending text messages over a GPRS connection. In this case, the
recipient’s phone number and the message center number must be
included in the fixed dialing list.
01/14/2009
FCC Draft
PC connectivity
63
Security level > Phone — to set the phone to ask for the security code
whenever a new SmartChip card is inserted into the phone. If you select
Memory, the phone asks for the security code when the SmartChip card
memory is selected, and you want to change the memory in use.
Access codes — to change the security code, PIN code, UPIN code, PIN2
code, or restriction password
Code in use — to select whether the PIN code or UPIN code should be
active
PIN2 code request — to select whether the PIN2 code is required when
using a specific phone feature which is protected by the PIN2 code.
Some SmartChip cards do not allow the code request to be turned off.
Authority certificates — to view the list of the authority certificates
downloaded into your phone. See ”Certificates” on page 38.
User certificates — to view the list of the user certificates downloaded
into your phone. See ”Certificates” on page 38.
Security module sett.— to view Secur. module details, select Module PIN
request, or change the module PIN and signing PIN. See also ”Access
codes” on page 7.
■Reset device
To reset some of the menu settings to their original values, select
Menu > Settings > Reset device. Enter 1234, 12345, or create a security
code if the phone prompts you to create one. The names and phone
numbers saved in the address book, are not deleted.
13. PC connectivity
You can access the Internet when your phone is connected to a
compatible PC through a Bluetooth or a data cable connection. You can
use your phone with a variety of PC connectivity and data
communications applications.
01/14/2009
FCC Draft
Battery and charger information
64
■Nokia PC Suite
With Nokia PC Suite you can synchronize contacts, calendar, notes, and
to-do notes between your phone and the compatible PC or a remote
internet server (network service). You may find more information and PC
Suite on the Nokia website at www.nokia.com/support or your local
Nokia website.
■Packet data
With your phone you can use packet data services. For availability and
subscription to data services, contact your network operator or service
provider. See ”Modem settings” on page 57.
■Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering phone calls during a computer connection is not
recommended, as it might disrupt the operation.
For better performance during data calls, place the phone on a
stationary surface with the keypad facing downward. Do not move the
phone by holding it in your hand during a data call.
14. Battery and charger information
■Charging and discharging
Your device is powered by a rechargeable battery. The battery intended for use
with this device is the BP-6MT. Nokia may make additional battery models
available for this device. This device is intended for use when supplied with power
from the following charger: AC-6. The exact charger model number may vary
depending on the type of plug. The plug variant is identified by one of the
following: E, EB, X, AR, U, A, C, or UB.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device. Use only replacement batteries qualified with the device per the IEEE-
01/14/2009
FCC Draft
Battery and charger information
65
1725-2006 standard. Use of other batteries or chargers may present a risk of fire,
explosion, leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a
prolonged period, it may be necessary to connect the charger, then disconnect
and reconnect it to begin charging the battery. If the battery is completely
discharged, it may take several minutes before the charging indicator appears on
the display or before any calls can be made.
Always switch the device off and disconnect the charger before removing the
battery.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
Always try to keep the battery between 15ºC and 25ºC (59ºF and 77ºF). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot
or cold battery may not work temporarily. Battery performance is particularly
limited in temperatures well below freezing.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
Do not dismantle, cut, open, crush, bend, deform, puncture, or shred cells or
batteries. In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. In the event of such a leak, flush your skin or eyes
immediately with water, or seek medical help.
Do not modify or remanufacture, attempt to insert foreign objects into the
battery or immerse or expose it to water or other liquids.
Improper battery use may result in a fire, explosion, or other hazard. If the device
or battery is dropped, especially on a hard surface, and you believe the battery
has been damaged, take it to a service center for inspection before continuing to
use it.
01/14/2009
FCC Draft
Battery and charger information
66
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged. Keep your battery out of the reach of small children.
■Nokia battery authentication
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, and
inspect the hologram label using the following steps:
Successful completion of the steps is not a total assurance of the authenticity of
the battery. If you have any reason to believe that your battery is not an
authentic, original Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements
logo when looking from another angle.
2. When you angle the hologram left, right, down,
and up, you should see 1, 2, 3, and 4 dots on
each side respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery,
please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
01/14/2009
FCC Draft
Care and maintenance
67
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
• Do not touch the main display with hard or angular materials. Objects like
earrings or jewelry may scratch the display.
• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity
sensor, and light sensor lenses).
• Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep (such as contacts and
calendar notes) before sending your device to a service facility.
• To reset the device from time to time for optimum performance, power off
the device and remove the battery.
01/14/2009
FCC Draft
Additional safety information
68
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■Operating environment
Remember to follow any special regulations in force in any area, and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 1.5 centimeters (5/8 inch) away from
the body. When a carry case, belt clip or holder is used for body-worn operation,
it should not contain metal and should position the device the above-stated
distance from your body.
To transmit data files or messages, this device requires a quality connection to
the network. In some cases, transmission of data files or messages may be
delayed until such a connection is available. Ensure that the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Implanted medical devices
Manufacturers of medical devices recommend that a minimum separation of
15.3 centimeters (6 inches) should be maintained between a wireless device and
an implanted medical device, such as a pacemaker or implanted cardioverter
01/14/2009
FCC Draft
Additional safety information
69
defibrillator to avoid potential interference with the medical device. Persons who
have such devices should:
• Always keep the wireless device more than 15.3 centimeters (6 inches) from
the medical device when the wireless device is turned on
• Do not carry the wireless device in a breast pocket
• Hold the wireless device to the ear opposite the medical device to minimize
the potential for interference.
• Turn the wireless device off immediately if there is any reason to suspect that
interference is taking place.
• Read and follow the directions from the manufacturer of their implanted
medical device.
If you have any questions about using your wireless device with an implanted
medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
01/14/2009
FCC Draft
Additional safety information
70
■Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refueling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
■Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless device for
essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SmartChip card is properly inserted
in the device.
2. Press the end key as many times as needed to clear the display and ready the
device for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. If the device is in the offline or flight mode, you
must change the profile to activate the phone function before you can make an
emergency call. Consult this guide or your service provider for more information.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
01/14/2009
FCC Draft
Additional safety information
71
■Hearing aid compatibility (HAC)
Warning: For hearing aid compatibility, you must turn off the
Bluetooth connectivity.
Your mobile device model complies with FCC rules governing hearing aid
compatibility. These rules require an Mx microphone or higher value. The M-
value, shown on the device box, refers to lower radio frequency (RF) emissions. A
higher M-value generally indicates that a device model has a lower RF emissions
level, which may improve the likelihood that the device will operate with certain
hearing aids. Some hearing aids are more immune than others are to
interference. Please consult your hearing health professional to determine the
M-rating of your hearing aid and whether your hearing aid will work with this
device. More information on accessibility can be found at
www.nokiaaccessibility.com.
■Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed not to
exceed the limits for exposure to radio waves recommended by international
guidelines. These guidelines were developed by the independent scientific
organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.84 W/kg.
Use of device accessories and enhancements may result in different SAR values.
SAR values may vary depending on national reporting and testing requirements
and the network band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements for exposure to
radio waves established by the Federal Communications Commission (USA) and
Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported under this standard during
01/14/2009
FCC Draft
72
product certification for use at the ear is
1.03 W/kg and when properly worn on the
body is 0.85 W/kg.
01/14/2009
FCC Draft
73
Index
A
Address Book 56
alarm clock 52
alert tone and message 53
alerts 32
antenna 11
applications 42
B
battery
authentication 74
charging 10
charging, discharging 72
installation 8
battery charge status 15
Bluetooth connectivity 63
bookmarks 36
browser 34, 36, 37
business cards 58
C
cache memory 39
calculator 55
calendar 54
call
counters 53
functions 17
options 19
settings 67
timers 53
voice mail 32
waiting 19
caller groups 59
calls 17, 18, 19
calls made 53
calls received 53
camera 43
effects 45
record a video clip 44
settings 45
take a photo 43
certificates 39
character case 21
charge the battery 10
charger lights 69
clock 15
clock settings 61
configuration 69
setting service 7
contact information 7
contacts 56
cookies 37
countdown timer 55
customer service 7
D
data
communication 72
transfer 65
data cable 67
date settings 61
define a storage folder 47
delete
contact details 58
contacts 58
messages 32
dialing 59
digital signature 40
downloads 7, 38
E
edit contact details 58
EGPRS 64
e-mail 29–32
emergency calls 78
end call 17
enhancements 69
equalizer 47
explosive environments 77
F
factory settings 71
fold animation 61
folders
define for storage 47
outbox 24
font size 61
G
games 42
Games & Applications 42
GPRS 64
groups 59
01/14/2009
FCC Draft
74
H
handsfree. See loudspeaker.
hearing aid 77
hearing aid compatibility 78
help 5
I
IM 25
indicators 15
installation
battery 8
SmartChip card 8
instant messaging 25
internet 34
K
key functions 14
keyguard 16
keypad lock 16
keys 16
L
language options 23
language settings 68
list of recordings 47
loudspeaker 19
M
main display 15, 61
maintenance 74
memory
capacity 41
SmartChip 56
status 59
memory card 10, 42
memory in use 59
menu 20
message center number 22
message length indicator 23
message settings 33
messages
multimedia 23
read and reply 24
sending 24
SmartChip 25
text 23
missed calls 53
multimedia messages 23
music player 45, 46
Music sync 67
my numbers 60
My Stuff 41
N
names 56
navigation 20
navigation key 62
network
name on display 15
15
Nokia contact information 7
note alarm 54
note creation 54
notes 55
O
offline mode 17
P
pacemakers 76
packet data 64, 72
parts 13
PC connectivity 71
PC Suite 71
phone
configuration 69
keys 13
parts 13
settings 68
phone lock. See keypad lock.
phonebook 56
PIN codes 14
play music 45
predictive text input 21
pushed messages 38
R
received calls 53
record a call 47
recordings list 47
ringing tones 41, 60
S
safety information 76
save names 56
save numbers 57
scrolling 20
security
module 39
settings 70
01/14/2009
FCC Draft
75
send multimedia message 24
service
commands 32
inbox 38
messages 38
numbers 59
service numbers 59
services 34
set profiles 60
settings
active standby 61
call 67
camera 45
clock 61
configuration 69
connectivity 63
contacts 58
data transfer 65
date 61
downloads 38
enhancements 69
fold animation 61
GPRS, EGPRS 64
main display 61
messages 33
my shortcuts 62
phone 68
profiles 60
restore factory settings 71
security 70
service inbox 38
themes 60
time 61
tones 60
cable 67
wallpaper 61
shortcuts 62
signal strength 15
SmartChip
card 17
card installation 8
speed dial list 59
speed dialing 18
standby mode 14, 62
status indicators 15
stopwatch 56
strap 12
subscribed names list 58
switch on and off 14
synchronization 65
T
take a photo 43
text 21, 22
themes 60
time settings 61
timer 55
to-do list 54
tones 60
Tones & Graphics 41
tools 48
traditional text input 22
U
unlock keypad 16
UPIN 14
V
vehicles 77
video clip 44
voice
dialing 18
voice mail 32
voice recorder 46
W
wallpaper 61
wireless markup language 34
wrist strap 12
write multimedia message 24
write text 21
X
XHTML 34
01/14/2009
FCC Draft
76
01/14/2009
FCC Draft
77
01/14/2009
FCC Draft
78
01/14/2009
FCC Draft