Microsoft RM-57 GSM900/1800/1900 Cellular Telephone W/BT User Manual R1115 en

Download:
Mirror Download [FCC.gov]
Document ID	514699
Application ID	Y/9m/zds9Odo+5aUNFGTZQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	278.71kB (3483923 bits)
Date Submitted	2005-02-11 00:00:00
Date Available	2005-02-17 00:00:00
Creation Date	2005-02-10 10:04:43
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2005-02-10 10:06:29
Document Title	R1115_en.book
Document Creator	PScript5.dll Version 5.2.2
Document Author:	hollas

R1115_en.book Page 1 Thursday, February 10, 2005 9:20 AM
Nokia 6681 User Guide
9236843
ISSUE 1 EN
R1115_en.book Page 2 Thursday, February 10, 2005 9:20 AM
DECLARATION OF CONFORMITY We, NOKIA
CORPORATION declare under our sole responsibility
that the product RM-57 is in conformity with the
provisions of the following Council Directive: 1999/5/
EC. A copy of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, and Pop-Port are trademarks or registered
trademarks of Nokia Corporation. Other product and company names mentioned
herein may be trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c) 1998200(5). Symbian and Symbian OS are trademarks of Symbian Ltd.
USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4
VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A)
DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE
FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii)
FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY
LICENSED BY MPEG LA, L.L.C.
Nokia operates a policy of continuous development. Nokia reserves the right to
make changes and improvements to any of the products described in this document
without prior notice.
Under no circumstances shall Nokia be responsible for any loss of data or income
or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided ‘as is’. Except as required by applicable
law, no warranties of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose,
are made in relation to the accuracy, reliability or contents of this document. Nokia
reserves the right to revise this document or withdraw it at any time without prior
notice
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
Export Controls
This device may contain commodities, technology or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights
reserved.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1997-2004. Tegic Communications, Inc. All rights reserved.
FCC INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
R1115_en.book Page 3 Thursday, February 10, 2005 9:20 AM
ABOUT ADD-ON APPLICATIONS FOR YOUR NOKIA 6681
In the sales package you will find a Reduced-Size Dual Voltage
MultimediaMemoryCard (RS-MMC) that contains additional applications from
Nokia and third-party developers. The content of the RS-MMC and the availability
of applications and services may vary by country, retailer and/or network operator.
The applications and further information about the use of the applications at
www.nokia.com/support are available in selected languages only.
Some operations and features are SIM card and/or network dependent, MMS
dependent, or dependent on the compatibility of devices and the content formats
supported. The availability of services may vary by country and region. Some
services are subject to a separate charge.
NO WARRANTY
The third party applications provided on the Reduced-size MultimediaMemoryCard
(RS-MMC) have been created and are owned by persons or entities that are not
affiliated with or related to Nokia. Nokia does not own the copyrights and/or
intellectual property rights to these third party applications. As such, Nokia does
not take responsibility for any end user support or the functionality of these third
party applications, nor the information presented in the applications or these
materials. Nokia does not provide any warranty for these applications.
YOU ACKNOWLEDGE THE SOFTWARE AND/OR APPLICATIONS (COLLECTIVELY, THE
"SOFTWARE") ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND EXPRESS
OR IMPLIED AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR THAT THE SOFTWARE WILL NOT INFRINGE ANY THIRD PARTY
PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. THERE IS NO WARRANTY
BY NOKIA OR BY ITS AFFILIATES THAT ANY ASPECT OF THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR-FREE. YOU ASSUME ALL RESPONSIBILITY AND RISK
FOR THE SELECTION OF THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS AND
FOR THE INSTALLATION, USE AND RESULTS OBTAINED FROM IT. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL NOKIA, ITS
EMPLOYEES OR AFFILIATES BE LIABLE FOR ANY LOST PROFITS, REVENUE, SALES,
DATA, INFORMATION OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES, PROPERTY DAMAGE, PERSONAL INJURY, INTERRUPTION OF BUSINESS,
OR FOR ANY DIRECT, INDIRECT, INCIDENTAL, ECONOMIC, COVER, PUNITIVE,
SPECIAL OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER
ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY
ARISING OUT OF THE INSTALLATION OR USE OF OR INABILITY TO USE THE
SOFTWARE, EVEN IF NOKIA OR ITS AFFILIATES ARE ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. BECAUSE SOME COUNTRIES/STATES/JURISDICTIONS DO NOT
ALLOW THE ABOVE EXCLUSION OR LIMITATION OF LIABILITY, BUT MAY ALLOW
LIABILITY TO BE LIMITED, IN SUCH CASES, NOKIA, ITS EMPLOYEES' OR AFFILIATES'
LIABILITY SHALL BE LIMITED TO 50 EURO. NOTHING CONTAINED IN THIS
DISCLAIMER SHALL PREJUDICE THE STATUTORY RIGHTS OF ANY PARTY DEALING
AS A CONSUMER.
COPYRIGHT (c) 2005 NOKIA. ALL RIGHTS RESERVED. NOKIA AND NOKIA
CONNECTING PEOPLE ARE REGISTERED TRADEMARKS OF NOKIA CORPORATION.
NOKIA CORPORATION
NOKIA MULTIMEDIA MARKETING
P.O. BOX 100, FIN-00045 NOKIA GROUP, FINLAND
TEL. +358 7180 08000
TELEFAX +358 7180 34016
WWW.NOKIA.COM
ISSUE 1 EN, 9236843
Contents
For your safety...........................................9
Personalise your phone .......................... 12
Set tones ................................................................................12
Offline profile................................................................13
Transfer content from another phone...........................13
Change the look of your phone.......................................14
Active standby mode ..........................................................15
Your phone .............................................. 16
Put on the wrist strap ........................................................16
Clock........................................................................................16
Clock settings................................................................16
World clock....................................................................17
Volume and loudspeaker control ....................................17
File manager ........................................................................17
View memory consumption ......................................18
Memory low—free memory.......................................18
Memory card tool................................................................19
Format a memory card...............................................19
Make calls ............................................... 21
Call...........................................................................................21
Speed dial a phone number...................................... 21
Make a conference call.............................................. 21
Answer or reject a call....................................................... 22
Call waiting (network service) ................................. 22
Options during a call .................................................. 23
Log........................................................................................... 23
Recent calls .................................................................. 23
Call duration ................................................................. 23
Packet data ................................................................... 24
Monitor all communication events........................ 24
Contacts (Phonebook) .............................26
Save names and numbers ................................................. 26
Default numbers and addresses .............................. 26
Copy contacts....................................................................... 27
SIM directory and other SIM services ................... 27
Add ringing tones for contacts ....................................... 27
Voice dialling........................................................................ 28
Add a voice tag ............................................................ 28
Make a call with a voice tag.................................... 28
Create contact groups ....................................................... 29
Remove members from a group .............................. 29
Contents
R1115_en.book Page 4 Thursday, February 10, 2005 9:20 AM
Contents
R1115_en.book Page 5 Thursday, February 10, 2005 9:20 AM
Camera and Gallery .................................30
Messaging.................................................42
Camera................................................................................... 30
Take pictures................................................................. 30
Take pictures in a sequence ..................................... 32
You in the picture—self-timer ................................. 32
The flash......................................................................... 32
Adjust colour and lighting........................................ 32
Adjust camera settings .............................................. 33
Record videos ............................................................... 33
Adjust video recorder settings................................. 34
Gallery .................................................................................... 35
View images.................................................................. 35
Write text .............................................................................. 43
Traditional text input ................................................. 43
Predictive text input—Dictionary............................ 44
Copy text to clipboard ............................................... 45
Write and send messages ................................................. 46
Postcard (network service) ....................................... 47
Receive MMS and e-mail settings ......................... 48
Inbox—receive messages................................................... 48
Multimedia messages................................................. 49
Data and settings ........................................................ 49
Web service messages................................................ 50
My folders ............................................................................ 50
Mailbox .................................................................................. 50
Open the mailbox........................................................ 50
Retrieve e-mail messages ......................................... 51
Delete e-mail messages............................................. 52
Disconnect from the mailbox .................................. 52
Outbox—messages waiting to be sent .......................... 53
View messages on a SIM card ......................................... 53
Messaging settings............................................................. 53
Text messages............................................................... 53
Multimedia messages................................................. 54
E-mail ............................................................................. 55
Web service messages................................................ 57
Imaging .....................................................37
Video editor .......................................................................... 37
Edit video, sound, and transitions .......................... 37
Image manager.................................................................... 38
Image print ........................................................................... 38
Printer selection........................................................... 39
Print preview ................................................................ 39
Print settings ................................................................ 39
RealPlayer™........................................................................... 39
Play video or sound clips........................................... 40
Stream content over the air..................................... 40
Receive RealPlayer settings...................................... 40
Cell broadcast ...............................................................57
Other settings ...............................................................57
Calendar................................................... 59
Create calendar entries......................................................59
Calendar views .............................................................59
Set a calendar alarm...................................................60
Remove calendar entries ...........................................60
Calendar settings .........................................................60
Web.......................................................... 61
Access the Web....................................................................61
Receive browser settings...........................................61
Enter the settings manually .....................................61
Bookmarks view ...................................................................62
Add bookmarks manually ..........................................62
Send bookmarks ...........................................................62
Make a connection .............................................................62
Connection security ....................................................63
Browse ....................................................................................63
View saved pages.........................................................64
Download and purchase items ........................................64
End a connection.................................................................65
Empty the cache ..........................................................65
Web settings .........................................................................65
Office ........................................................67
Calculator .............................................................................. 67
Calculate percentages................................................ 67
Converter............................................................................... 67
Set base currency and exchange rates.................. 68
To-do....................................................................................... 68
Create a task list.......................................................... 68
Notes....................................................................................... 68
Recorder................................................................................. 69
My own.....................................................70
Go to—add shortcuts.......................................................... 70
Delete a shortcut ......................................................... 70
Wallet .................................................................................... 70
Create a wallet code................................................... 71
Store personal card details ....................................... 71
Create personal notes ................................................ 71
Create a wallet profile ............................................... 72
View ticket details....................................................... 72
Wallet settings ............................................................. 72
Reset the wallet and wallet code ........................... 73
IM—Instant messaging (chat).................74
Receive IM settings ............................................................ 74
Connect to an IM server.................................................... 74
Modify your IM settings.................................................... 74
Contents
R1115_en.book Page 6 Thursday, February 10, 2005 9:20 AM
Contents
R1115_en.book Page 7 Thursday, February 10, 2005 9:20 AM
Search for IM groups and users...................................... 75
Join and leave an IM group ............................................. 75
Chat ........................................................................................ 75
Record chats ................................................................. 76
View and start conversations .......................................... 76
IM contacts........................................................................... 77
Manage IM groups ............................................................. 78
Administrate an IM group ................................................ 78
Create a new IM group.............................................. 78
Add and remove group members............................ 79
Chat server settings............................................................ 79
Connectivity .............................................80
Bluetooth connection ........................................................ 80
Bluetooth connection settings ................................ 80
Send data using a Bluetooth connection............. 81
Pair devices ................................................................... 82
Receive data using a Bluetooth connection........ 82
Switch off Bluetooth connectivity ......................... 83
PC connections .................................................................... 83
CD-ROM......................................................................... 83
Your phone as a modem............................................ 83
Connection manager.......................................................... 83
View data connection details .................................. 84
Remote synchronisation ................................................... 84
Create a new synchronisation profile ................... 85
Synchronise data ......................................................... 85
Device manager ................................................................... 86
Server profile settings................................................ 86
Tools..........................................................87
Settings.................................................................................. 87
Phone settings.............................................................. 87
Call settings .................................................................. 88
Connection settings.................................................... 89
Date and time............................................................... 92
Security .......................................................................... 92
Call diverting ................................................................ 95
Call barring (network service).................................. 95
Network.......................................................................... 96
Enhancement settings ............................................... 96
Voice commands ................................................................. 96
Add a voice command to an application.............. 96
Application manager.......................................................... 97
Install applications and software ........................... 97
Remove applications and software ........................ 98
Application settings.................................................... 99
Activation keys—handle copyright-protected files ... 99
Troubleshooting .................................... 100
Q&A.......................................................................................100
Battery information.............................. 103
Additional safety information............. 105
Charging and discharging .............................................. 103
Index ..................................................... 109
Care and maintenance ......................... 104
Contents
R1115_en.book Page 8 Thursday, February 10, 2005 9:20 AM
R1115_en.book Page 9 Thursday, February 10, 2005 9:20 AM
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH OFF WHEN REFUELLING Don't use
the phone at a refuelling point. Don't use near
fuel or chemicals.
SWITCH ON SAFELY Do not switch the phone
on when wireless phone use is prohibited or
when it may cause interference or danger.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Don't use the phone where
blasting is in progress.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
USE SENSIBLY Use only in the normal
position as explained in the product
documentation. Don't touch the antenna
unnecessarily.
INTERFERENCE All wireless phones may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless phones can cause
interference in aircraft.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your phone is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make backup copies or keep a written record of all
important information.
R1115_en.book Page 10 Thursday, February 10, 2005 9:20 AM
CONNECTING TO OTHER PHONES When
connecting to any other phone, read its user
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the phone is switched on and in
service. Press as many times as needed to
clear the display and return to the start
screen. Enter the emergency number, then
press . Give your location. Do not end the
call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 900/1800/1900 network. Contact your
service provider for more information about networks.
When using the features in this device, obey all laws and
respect privacy and legitimate rights of others.
Warning: To use any features in this device, other
than the alarm clock, the phone must be switched on.
Do not switch the device on when wireless phone use
may cause interference or danger.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilise network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use Network Services. For
instance, some networks may not support all languagedependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Contact your
service provider for more information.
This wireless device is a 3GPP GSM Release 99 terminal
supporting GPRS service, and is designed to support also
Release 97 GPRS networks. However, there may be some
compatibility issues when used in some Release 97 GPRS
networks. For more information, contact your service
provider.
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, e-mail and content downloading using
10
R1115_en.book Page 11 Thursday, February 10, 2005 9:20 AM
the browser or over MMS, require network support for
these technologies.
Enhancements, batteries, and
chargers
Check the model number of any charger before use with
this phone. This phone is intended for use when supplied
with power from ACP-12 and LCH-12.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Your phone and its enhancements may contain small parts.
Keep them out of reach of small children.
11
Personalise your phone
R1115_en.book Page 12 Thursday, February 10, 2005 9:20 AM
12
Personalise your phone
Note: Your service provider or network operator
may have requested a different order for menu items
or the inclusion of different icons in the phone menu.
Contact your service provider, network operator, or
Nokia Customer Care for assistance with any features
that differ from those described in this guide.
• To change the standby mode background image or
what is shown in the screen saver, see ‘Change the
look of your phone’, p. 14.
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 15.
• To customise the ringing tones, see ‘Set tones’, p. 12.
• To change the shortcuts assigned for the different
presses of the scroll key and selection keys in the
standby mode, see ‘Standby mode’, p. 87.
• To change the clock shown in the standby mode, select
Clock > Options > Settings > Clock type > Analogue
or Digital.
• To change the clock alarm tone, select Clock >
Options > Settings > Clock Alarm tone and a tone.
• To change the calendar alarm tone, select Calendar >
Options > Settings.
• To change the welcome note to an image or text, select
Tools > Settings > Phone > General > Welcome note
or logo.
• To assign an individual ringing tone to a contact, select
Contacts. See ‘Add ringing tones for contacts’, p. 27.
• To assign a speed dial to a contact, press a numbered
key in the standby mode (
is reserved for the
voice mailbox), and press . Press Yes, then select a
contact.
• To rearrange the main menu, in the main menu, select
Options > Move, New folder or Move to folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
Set tones
To set and customise the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles. You
can see the currently selected profile at the top of the
display in the standby mode. If the General profile is in use,
only the current date is shown.
To change the profile, press
in the standby mode.
Scroll to the profile you want to activate, and select OK.
Tip! You can choose Tone downloads to open a list of
bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
To modify a profile, select Tools > Profiles. Scroll to the
profile, and select Options > Personalise. Scroll to the
setting you want to change, and press
to open the
choices. Tones stored on the memory card are indicated
with . Scroll through the tone list and listen to each one
before you make your selection. Press any key to stop the
sound.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the phone without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator. All wireless phone signals to and from the device
are prevented. If you try to send messages, they are placed
in the outbox to be sent later.
Tip! For information on how to change the alert tone
for the calendar or clock, see ‘Personalise your phone’,
p. 12.
Warning: In Offline profile you cannot make calls,
except calls to certain emergency numbers, or use
features that require network coverage. To make calls,
change the profile to activate the phone function. If
the device has been locked, you must enter the unlock
code before you can change the profile and make calls.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
wireless device use is prohibited or when it may cause
interference or danger.
To leave the Offline profile, select another profile, and
select Options > Activate > Yes. The phone re-enables
wireless transmissions (providing there is sufficient signal
strength). If a Bluetooth connection is activated before
entering the Offline profile, it will be deactivated. A
Bluetooth connection is automatically reactivated after
leaving the Offline profile. See ‘Bluetooth connection
settings’, p. 80.
Personalise your phone
R1115_en.book Page 13 Thursday, February 10, 2005 9:20 AM
Transfer content from
another phone
You can copy contacts, calendar, images, video, and sound
clips using a Bluetooth connection, from a compatible
Nokia Series 60 phone.
13
Personalise your phone
R1115_en.book Page 14 Thursday, February 10, 2005 9:20 AM
14
You can use your Nokia 6681 device without a SIM card.
The offline profile is automatically activated when the
phone is switched on without a SIM card. This allows you
to use the SIM card in another phone.
Before starting the transfer to your Nokia 6681 device,
you must activate Bluetooth connectivity on both phones.
On each phone press
, and select Connect. >
Bluetooth. Select Bluetooth > On. Give a name to each
phone.
To transfer content:
1 Press , and select Tools > Transfer on your Nokia
6681 device. Follow the instructions on the screen.
2 The phone searches for devices with Bluetooth
connectivity. When it has finished the search, select
your other phone from the list.
3 You are asked to enter a code on your Nokia 6681
device. Enter a code of your choice (1-16 digits), and
select OK. Enter the same code on the other phone,
and select OK.
4 The Transfer application is sent to the other phone as
a message.
5 Open the message to install Transfer on the other
phone, and follow the instructions on the screen. The
application is added to the main menu.
6 From your Nokia 6681 device, select the content you
want to copy from the other phone.
Content is copied from the memory and memory card of
the other phone to your Nokia 6681 device and memory
card. The copying time depends on the amount of data to
be transferred. Data is not removed from the other phone.
Change the look of your
phone
To change the look of your phone display, such as the
wallpaper, colour palette, and icons, press , and select
Tools > Themes. The active theme is indicated by
. In
Themes you can group together elements from other
themes or select images from the Gallery to personalise
themes further. The themes on the memory card are
indicated by .
Options in the Themes main view are Preview/
Theme downloads, Apply, Edit, Help, and Exit.
To activate a theme, scroll to it, and select Options >
Apply.
To preview a theme, scroll to it, and select Options >
Preview.
To edit themes, scroll to a theme, and select Options > Edit
to change the following options:
• Wallpaper—The image to be shown as a background
image in the standby mode.
• Colour palette—The colours used on the screen.
• Screen saver—The screen saver type: date and time, or
a text you have written yourself. See also Screen saver
timeout settings, p. 88.
• Image in 'Go to'—The background image for the Go to
application.
The active standby display
is shown with default
applications across the top
of the screen, and calendar,
to-do, and player events
listed below.
To restore the selected theme back to its original settings,
select Options > Restore orig. theme when you edit a
theme.
Scroll to an application or
event, and press
Active standby mode
Use your standby display for fast access to your most
frequently used applications.
Some shortcuts may be fixed, and you are not able to
change them.
To set the active standby mode on, press , select
Tools > Settings > Phone > Standby mode > Active
standby, and press
to switch active standby on or off.
The standard scroll key
shortcuts available in the
standby mode cannot be
used when the active standby mode is on.
Personalise your phone
R1115_en.book Page 15 Thursday, February 10, 2005 9:20 AM
To change the default application shortcuts:
, select Tools > Settings > Phone > Standby
mode > Active standby apps., and press
2 Highlight a shortcut to an application, and select
Options > Change.
3 Select a new application from the list, and press .
1 Press
15
Your phone
R1115_en.book Page 16 Thursday, February 10, 2005 9:20 AM
Your phone
Put on the wrist strap
Thread the strap, and tighten it.
Note: Use only Nokia
approved enhancements.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock
Options in Clock are Set alarm, Reset alarm,
Remove alarm, Settings, Help, and Exit.
Press
, and select Clock.
To set a new alarm, select Options > Set alarm. Enter the
alarm time, and select OK. When the alarm is active, the
indicator is shown.
To turn off the alarm, select Stop. When the alarm tone
sounds, press any key, or select Snooze to stop the alarm
for five minutes, after which it will resume. You can do
this a maximum of five times.
16
Clock settings
To change the clock settings, select Options > Settings in
the clock.
To change the clock shown in the standby mode, scroll
down, and select Clock type > Analogue or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your phone (network
service), scroll down, and select Auto time update. For the
Auto time update setting to take effect, the phone
restarts.
To change the alarm tone, scroll down, and select Clock
alarm tone.
To change the daylight-saving time status, scroll down,
and select Daylight-saving. Select On to add one hour to
the My home city time. See ‘World clock’ on p. 17. When
the daylight-saving is active, the
indicator is shown in
the clock main view.
World clock
Open Clock, and press
to open the world clock view. In
the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. Enter the
first letters of the city name. The search field appears
automatically, and the matching cities are displayed.
Select a city. You can add a maximum of 15 cities to the
list.
To set your current city, scroll to a city, and select
Options > My home city. The city is displayed in the clock
main view, and the time in your phone is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Volume and loudspeaker control
To increase or decrease the volume
level when you have an active call or
are listening to a sound, press
or
, respectively.
The built-in loudspeaker allows you to speak and listen to
the phone from a short distance without having to hold
the phone to your ear, for example, having it on a table
nearby. Sound applications use the loudspeaker by
default.
• To locate the loudspeaker, see the Quick Start Guide,
‘Keys and parts’.
• To use the loudspeaker during a call, start a call, and
press
Important: Do not hold the phone near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
• To turn off the loudspeaker when you have an active
call or are listening to a sound, press
Your phone
R1115_en.book Page 17 Thursday, February 10, 2005 9:20 AM
File manager
Many features of the phone use memory to store data.
These features include contacts, messages, images, ringing
tones, calendar and to-do notes, documents, and
downloaded applications. The free memory available
depends on how much data is already saved in the phone
memory. You can use a memory card as extra storage
17
Your phone
R1115_en.book Page 18 Thursday, February 10, 2005 9:20 AM
space. Memory cards are rewritable, so you can delete and
save data on a memory card.
To browse files and folders in the phone memory or on a
memory card (if inserted), press , and select Tools > File
mgr.. The phone memory view (
) opens. Press
to
open the memory card view (
).
To move or copy files to a folder, press
and
at the
same time to mark a file, and select Options > Move to
folder or Copy to folder.
Icons in File mgr.:
Folder
Folder that has a subfolder
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the different memories in your
phone. See the CD-ROM supplied in the sales package.
View memory consumption
To view what types of data you have in the phone and how
much memory the different data types consume, select
Options > Memory details. Scroll down to Free memory
to view the amount of free memory in the phone.
18
To view the amount of free memory on the memory card,
if you have a card inserted in the phone, press
to open
the memory card view, and select Options > Memory
details.
Memory low—free memory
The phone notifies you if the phone memory or memory
card memory is getting low.
To free phone memory, transfer data to a memory card in
the file manager. Mark files to be moved, select Move to
folder > Memory card, and a folder.
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox,
Drafts, and Sent folders
in Messaging
• Retrieved e-mail
messages from the phone
memory
• Saved Web pages
• Saved images, videos, or
sound files
• Contact information
• Calendar notes
• Downloaded applications. See also ‘Application
manager’, p. 97.
• Any other data that you no longer need
Memory card tool
Note: This device uses a Reduced Size Dual Voltage
(1.8/3V) MultiMediaCard (MMC). To ensure
interoperability, use only dual voltage MMCs. Check the
compatibility of an MMC with its manufacturer or
provider.
Press , and select Tools > Memory. You can use a
memory card as extra storage space. See the Quick Start
Guide, ‘Inserting the memory card’. You can also back up
information from phone memory, and restore the
information to the phone later.
You cannot use the memory card if the door of the memory
card slot is open.
Keep all memory cards out of the reach of small children.
Do not open the memory card slot door in the middle of an
operation. Opening the slot door may damage the memory
card as well as the device, and data stored on the card may
be corrupted.
Options in the memory card tool are Backup phone
mem., Restore from card, Format mem. card,
Memory card name, Memory details, Help, and Exit.
Use only compatible MultiMediaCards (MMC) with this
device. Other memory cards, such as Secure Digital (SD)
cards, do not fit in the MMC card slot and are not
compatible with this device. Using an incompatible
memory card may damage the memory card as well as the
device, and data stored on the incompatible card may be
corrupted.
• To back up information from phone memory to a
memory card, select Options > Backup phone mem.
• To restore information from the memory card to the
phone memory, select Options > Restore from card.
Your phone
R1115_en.book Page 19 Thursday, February 10, 2005 9:20 AM
Format a memory card
When a memory card is formatted, all data on the card is
permanently lost.
Tip! To rename a memory card, select Options >
Memory card name.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
19
Your phone
R1115_en.book Page 20 Thursday, February 10, 2005 9:20 AM
20
To format a memory card, select Options > Format mem.
card. Select Yes to confirm. When formatting is complete,
enter a name for the memory card, and select OK.
Make calls
Call
Tip! To increase or decrease the volume during a call,
press
or
1 In the standby mode, enter the phone number,
including the area code. Press
to remove a number.
For international calls, press
twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2 Press to call the number.
3 Press to end the call (or to cancel the call attempt).
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voice
mailbox > Options > Change number. Enter the
number (obtained from your service provider), and
select OK.
Pressing
is active.
always ends a call, even if another application
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name; or enter the first
letters of the name to the search field. Matching contacts
are listed. Press to call.
To call your voice mailbox (network service), press and
hold
in the standby mode. See also ‘Call diverting’,
p. 95.
Make calls
R1115_en.book Page 21 Thursday, February 10, 2005 9:20 AM
To call a recently dialled number in the standby mode,
press to access a list of the 20 last numbers you called
or attempted to call. Scroll to the number you want, and
press to call the number.
Speed dial a phone number
To assign a phone number to one of the speed dialling keys
—
), press , and select Tools > Speed
dial.
is reserved for the voice mailbox.
To call in the standby mode, press the speed dial key and
Tip! To speed dial a number by pressing and holding
the key, press , and select Tools > Settings > Call >
Speed dialling > On.
Make a conference call
1 Make a call to the first participant.
2 To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
21
Make calls
R1115_en.book Page 22 Thursday, February 10, 2005 9:20 AM
3 When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
The phone supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and press Private. The conference
call is put on hold on your phone. The other
participants can still continue the conference call.
Once you have finished the private conversation,
select Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4 To end the active conference call, press .
Answer or reject a call
To answer the call, press
To mute the ringing tone when a call comes in, select
Silence.
Tip! If a compatible headset is connected to the
phone, answer and end a call by pressing the headset
key.
If you do not want to answer a call, press to reject it.
The caller hears a line busy tone. If you have activated the
Call divert > If busy function to divert calls, rejecting an
incoming call also diverts the call. See ‘Call diverting’, p.
95.
When you reject an incoming call, you can also send a text
message to the caller informing why you cannot answer
the call. Select Options > Send text message. You can edit
the text before sending it. See also Reject call with SMS, p.
88.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting (network
service) in Tools > Settings > Call > Call waiting.
Tip! To change the phone tones for different
environments and events, for example, when you want
your phone to be silent, see ‘Set tones’, p. 12.
To answer the waiting call, press
hold.
. The first call is put on
To switch between the two calls, press Swap. Select
Options > Transfer to connect an incoming call or a call
22
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press . To end both calls,
select Options > End all calls.
Log
Options during a call
Recent calls
Many of the options that you can use during a call are
network services. Select Options during a call for some of
the following options: Mute or Unmute, Answer, Reject,
Swap, Hold or Unhold, Activate handset, Activate loudsp.,
or Activate handsfree (if a compatible headset with
Bluetooth connectivity is attached), End active call or End
all calls, New call, Conference, and Transfer. Select from
the following:
To monitor the phone numbers of missed, received, and
dialled calls, press , and select Connect. > Log >
Recent calls. The phone registers missed and received
calls only if the network supports these functions, the
phone is switched on, and within the network’s service
area.
Replace—To end an active call and replace it by answering
the waiting call.
Send DTMF—To send Dual Tone Multi-frequency (DTMF)
tone strings, for example, a password. Enter the DTMF
string or search for it in Contacts. To enter a wait character
(w) or a pause character (p), press
repeatedly.
Select OK to send the tone.
Tip! You can add DTMF tones to the Phone number
or DTMF fields in a contact card.
Make calls
R1115_en.book Page 23 Thursday, February 10, 2005 9:20 AM
Tip! When you see a note in the standby mode about
missed calls, select Show to access the list of missed
calls. To call back, scroll to a name or number, and
press .
Erasing recent call lists—To clear all recent call lists,
select Options > Clear recent calls in the recent calls
main view. To clear one of the call registers, open the
register you want to erase, and select Options > Clear list.
To clear an individual event, open a register, scroll to the
event, and press
Call duration
To monitor the approximate duration of your incoming
and outgoing calls, press , and select Connect. > Log >
Call duration.
23
Make calls
R1115_en.book Page 24 Thursday, February 10, 2005 9:20 AM
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code, see ‘Security’,
‘Phone and SIM’, p. 92.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select Connect. >
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all calls, text
messages, or data connections
registered by the phone, press
, select Connect. > Log, and
press
to open the general
log. For each communication
event, you can see the sender or
recipient name, phone number,
name of the service provider, or
access point. You can filter the
general log to view just one
type of event and create new contact cards based on the
log information.
Tip! To view a list of sent messages, press
select Messaging > Sent.
, and
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
packet data connections.
Note: When sending messages, your phone may
display Sent. This is an indication that the message has
been sent by your phone to the message centre number
programmed into your phone. This is not an indication
that the message has been received at the intended
destination. For more details about messaging services,
check with your service provider.
24
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm.
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the phone memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
Make calls
R1115_en.book Page 25 Thursday, February 10, 2005 9:20 AM
Packet data counter and connection timer: To view how
much data, measured in kilobytes, has been transferred
and how long a certain packet data connection has lasted,
scroll to an incoming or outgoing event indicated by Pack.,
and select Options > View details.
25
Contacts (Phonebook)
R1115_en.book Page 26 Thursday, February 10, 2005 9:20 AM
Contacts (Phonebook)
Press , and select Contacts. In Contacts you can add a
personal ringing tone, voice tag, or a thumbnail image to
a contact card. You can also create contact groups, which
allow you to send text messages or e-mail to many
recipients at the same time. You can add received contact
information (business cards) to contacts. See ‘Data and
settings’, p. 49. Contact information can only be sent to or
received from compatible devices.
Options in Contacts are Open, Call, Create
message, New contact, Open conversation, Edit,
Delete, Duplicate, Add to group, Belongs to groups,
Mark/Unmark, Copy, SIM contacts, Go to web address,
Send, Contacts info, Settings, Help, and Exit.
Save names and numbers
1 Select Options > New contact.
2 Fill in the fields that you want, and press Done.
Options when editing a contact card are: Add
thumbnail, Remove thumbnail, Add detail, Delete
detail, Edit label, Help, and Exit.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
26
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same
time, press
and
to mark the contacts, and press
to delete.
Tip! To add and edit contact cards, use Nokia
Contacts Editor available in Nokia PC Suite. See the
CD-ROM supplied with your phone.
To attach a small thumbnail image to a contact card,
open the contact card, and select Options > Edit >
Options > Add thumbnail. The thumbnail image is
shown when the contact calls.
Default numbers and addresses
You can assign default numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address.
1 In contacts, select a contact, and press .
2 Select Options > Defaults.
3 Select a default to which you want to add a number or
an address, and select Assign.
4 Select a number or an address you want to set as a
default.
The default number or address is underlined in the contact
card.
Copy contacts
Tip! To send contact information, select the card you
want to send. Select Options > Send > Via text
message, Via multimedia, or Via Bluetooth. See
‘Messaging’, p. 42 and ‘Send data using a Bluetooth
connection’, p. 81.
• To copy names and numbers from a SIM card to your
phone, press
, and select Contacts > Options > SIM
contacts > SIM directory. Select the names you want to
copy and Options > Copy to Contacts.
• To copy a telephone, fax, or pager number from
contacts to your SIM card, select Contacts, and open a
contact card. Scroll to the number, and select
Options > Copy > To SIM directory.
Tip! You can synchronise your contacts to a
compatible PC with Nokia PC Suite. See the CD-ROM
supplied with your phone.
SIM directory and other SIM services
Press
, and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
Add ringing tones for contacts
When a contact or group member calls you, the phone
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your phone recognises it).
Tip! Speed dialling is a quick way to call frequently
used numbers. You can assign speed dialling keys to
eight phone numbers. See ‘Speed dial a phone number’,
p.21.
Contacts (Phonebook)
R1115_en.book Page 27 Thursday, February 10, 2005 9:20 AM
1 Press
to open a contact card, or go to the groups
list, and select a contact group.
2 Select Options > Ringing tone. A list of ringing tones
opens.
3 Select the ringing tone you wish to use for the
individual contact or the selected group.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Note: For availability, rates, and information on
using SIM services, contact your SIM card vendor
(network operator, service provider or other vendor).
27
Contacts (Phonebook)
R1115_en.book Page 28 Thursday, February 10, 2005 9:20 AM
Voice dialling
You can make a phone call by saying a voice tag that has
been added to a contact card. Any spoken words can be a
voice tag.
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are
dependent on the speaker's voice.
• You must say the name exactly as you said it when you
recorded it.
• Voice tags are sensitive to background noise. Record
voice tags and use them in a quiet environment.
• Very short names are not accepted. Use long names
and avoid similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialling in all circumstances.
voice tag, and select Options > Add voice tag.
Tip! To view a list of voice tags you have defined,
select Contacts > Options > Contacts info > Voice
tags.
3 Select Start to record a voice tag. After the starting
tone, say clearly the words you want to record as a
voice tag. Wait until the phone plays the recorded tag
and saves it.
is displayed next to the number in the
contact card, indicating that a voice tag has been
added to it.
Make a call with a voice tag
You must say the voice tag exactly as you said it when you
recorded it. When you are making a call by saying a voice
tag, the loudspeaker is in use. Hold the phone at a short
distance away, and say the voice tag clearly.
Example: You can use a person’s name as a voice tag
(for example, ’John’s mobile’).
Press and hold
. A short tone is played, and the note
Speak now is displayed. The phone plays the original voice
tag, displays the name and number, and dials the number
of the recognised voice tag.
You can have only one voice tag per contact card. You can
add a voice tag to up to 50 phone numbers.
1 In Contacts, open the contact card to which you want
to add a voice tag.
Tip! To listen to, change, or delete a voice tag, open a
contact card, and scroll to the number that has a voice
tag (indicated by
). Select Options > Voice tags >
Playback, Change, or Delete.
Add a voice tag
28
2 Scroll to the number to which you want to add the
Create contact groups
1 In Contacts, press
to open the groups list.
2 Select Options > New group.
3 Write a name for the group or use the default name
Group %N, and select OK.
4 Open the group, and select Options > Add members.
5 Scroll to a contact, and press
to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6 Select OK to add the contacts to the group.
Contacts (Phonebook)
R1115_en.book Page 29 Thursday, February 10, 2005 9:20 AM
To rename a group, select Options > Rename, enter the
new name, and select OK.
Options in the groups list view are Open, New group,
Delete, Rename, Ringing tone, Contacts info, Settings,
Help, and Exit.
Remove members from a group
1 In the groups list, open the group you want to modify.
2 Scroll to the contact, and select Options > Remove
from group.
3 Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs
to groups.
29
Camera and Gallery
R1115_en.book Page 30 Thursday, February 10, 2005 9:20 AM
Camera and Gallery
Camera
Respect the personal rights of others and obey the local
laws, regulations, and customs when taking and using
images or video clips.
With the Cameras application you can take pictures and
record videos while on the move. The images and video
clips are automatically saved in the Gallery application.
The camera produces JPEG images, and video clips are
recorded in the 3GPP file format with the .3gp file
extension. You can also send images or video clips in a
multimedia message, as an e-mail attachment, or using a
Bluetooth connection.
Open the camera lens cover on the back of the phone to
open the camera, or press Cameras.
The Cameras application starts when the camera lens
cover is open, and you can see the view to be captured.
Press
to move between Image and Video views.
Tip! You can insert an image into a contact card. See
‘Save names and numbers’, p. 26.
30
The Nokia 6681 device supports an image capture
resolution of up to 1280 x 960 pixels. The image resolution
in these materials may appear different.
Take pictures
Press
or
to move between Image and Video views.
Open the Image view.
Options before taking a picture are Capture, New,
Flash, Activate night mode/Deact. night mode, Sequence
mode/Normal mode, Self-timer, Go to Gallery, Adjust,
Settings, Help, and Exit.
Camera indicators show the following:
• The phone memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, can fit in the
remaining memory of your phone or the memory card.
• The zoom indicator (3) shows the zoom level. Press
to zoom in, press
to zoom out.
• The flash indicator (4) shows if the flash is On ( ), Off
( ), or Automatic (no icon).
• The night mode indicator
(5) shows that the night
mode is active.
• The sequence mode
indicator (6) shows that
sequence mode is active.
See ‘Take pictures in a
sequence’, p. 32.
• The self-timer indicator
(7) shows how much time
is left before a picture is
taken. See ‘You in the
picture—self-timer’, p. 32.
Shortcuts are as follows:
• Press
to activate or deactivate night mode.
• Press
to activate or deactivate sequence mode.
• Press
to adjust brightness.
• Press
o to adjust contrast.
To take a picture, press
. Do not move the phone before
the image is saved. The image is saved automatically in the
Images folder of Gallery. See ‘Gallery’, p. 35.
Saving the captured image may take longer if you have
changed the zoom, lighting, or colour settings.
• To take images or record video in a dark environment,
use the night mode. If you are using the night mode,
the exposure time is longer and the camera needs to be
kept still longer.
• To make lighting and colour adjustments before taking
a picture, select Options > Adjust > Brightness,
Contrast, White balance , or Colour tone. See ‘Adjust
colour and lighting’, p. 32.
• The quality of a zoomed picture is lower than that of a
nonzoomed picture, but the image remains the same
size. You may notice the difference in image quality if
viewed on a PC.
• Camera goes into battery saving mode if there are no
key presses within a minute. To continue taking
pictures, press
Camera and Gallery
R1115_en.book Page 31 Thursday, February 10, 2005 9:20 AM
After the image has been taken, note the following:
• If you do not want to keep the image, press .
• To return to the viewfinder to take a new picture, press
• To send the image via Bluetooth, via e-mail, or Via
multimedia, press
. For more information see
‘Messaging’, p. 42 and ‘Bluetooth connection’, p. 80.
• To set the picture as wallpaper in the standby mode,
select Options > Set as wallpaper.
When taking a picture, note the following:
• It is recommended to use both hands to keep the
camera still.
31
Camera and Gallery
R1115_en.book Page 32 Thursday, February 10, 2005 9:20 AM
Take pictures in a sequence
Select Options > Flash > On to use the flash.
Select Options > Sequence
mode to set the camera to
take six pictures in a
sequence. After the pictures
are taken, they are
automatically saved in
Gallery, and are shown in a
grid.
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This allows the subject of the picture to see
when the picture is taken. There is no flash effect on the
resultant picture.
You in the picture—self-timer
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select Options > Self-timer > 10
seconds, 20 seconds, or 30 seconds. Select Activate. The
self-timer indicator ( ) blinks and the phone beeps
when the timer is running. The camera takes the picture
after the selected delay has elapsed.
The flash
The camera has an LED flash for low light conditions. The
following flash modes are available: On, Off, and
Automatic.
32
Adjust colour and lighting
To enable the camera to reproduce colours and lighting
more accurately, or to add effects to your pictures or
videos, select Options > Adjust, and select from the
following:
Brightness—Scroll left and right to select the appropriate
brightness setting.
Contrast—Scroll left and right to select the appropriate
contrast setting.
White balance—Select the current lighting condition from
the list. This allows the camera to reproduce colours more
accurately.
Colour tone—Select a colour effect from the list.
The screen display changes to match any settings made,
showing you how the final pictures or videos will look.
Adjust camera settings
Record videos
1 Select Options > Settings > Image.
2 Scroll to the setting you want to change:
Press
or
to move between Image and Video views.
Open the Video view.
Show captured image—Select Yes if you want to see the
captured image after it has been taken or No if you
want to continue taking pictures immediately.
Image quality—High, Normal, and Basic. The better the
image quality, the more memory the image consumes.
The quality of a zoomed picture is lower than that of a
nonzoomed picture, but the image remains the same
size. You may notice the difference in image quality if
viewed on a PC, for example. If you are going to print
the image, select High or Normal image quality.
Image resolution—Select the resolution you want to use
for the images you are going to take.
Glossary: Resolution is a measure of sharpness and
clarity of an image. Resolution refers to the number
of pixels in an image. The more pixels, the more
detailed the picture is, and the more memory it
consumes.
Default image name—Set a default name for the images
you are going to take. You can replace the date with
your own text (for example, ‘Holiday_2005’).
Memory in use—Select where to store your images.
Options before recording a video are Record, New,
Activate night mode/Deact. night mode, Mute/Unmute,
Go to Gallery, Adjust, Settings, Help, and Exit.
Video recorder indicators
show the following:
• The phone memory ( )
and memory card ( )
indicators (1) show
where the video is saved.
• The current video length
indicator (2) shows
elapsed time and time
remaining.
• The zoom indicator (3)
shows the zoom level. Press
to zoom in on your
subject before or during recording. Press
to zoom
out.
• The microphone indicator (4) shows that the
microphone is muted.
• The night mode indicator (5) shows that the night
mode is active.
Camera and Gallery
R1115_en.book Page 33 Thursday, February 10, 2005 9:20 AM
Shortcuts are as follows:
33
Camera and Gallery
R1115_en.book Page 34 Thursday, February 10, 2005 9:20 AM
• Press
• Press
• Press
to activate or deactivate the night mode.
to adjust brightness.
to adjust contrast.
To make lighting and colour adjustments before taking a
picture, select Options > Adjust > Brightness, Contrast,
White balance, or Colour tone. See ‘Adjust colour and
lighting’, p. 32.
Adjust video recorder settings
Press
to start recording. The record icon
is shown.
If you use the camera to record a video clip, the LED flash
is constantly on in low power mode, indicating that a
video clip is being recorded.
Length—If you select Maximum, the length of the video
recording is restricted by the available space on your
memory card, and up to one hour per clip. You cannot send
a video clip recorded like this by MMS, due to the recording
properties. Select Short to record video clips up to 300 kB
(approximately 30 seconds in duration) so that they can be
conveniently sent as a multimedia message to a
compatible device. Some networks, however, may only
support sending of multimedia messages with a maximum
size of 100 kB.
To pause recording at any time, press
. The pause icon
starts to blink on the display. Press
again to
resume recording.
Video recording automatically stops if recording is set to
pause and there are no key presses within a minute.
Select Stop to stop recording. The video clip is
automatically saved to the Video clips folder of Gallery.
See ‘Gallery’, p. 35.
After a video clip has been recorded:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, press
• To return to the viewfinder to record a new video,
press
34
• To send the video via Bluetooth, via e-mail, or Via
multimedia, press
. For more information, see
‘Messaging’, p. 42 and ‘Bluetooth connection’, p. 80.
Select Options > Settings > Video and the setting you
want to change:
Video resolution—Select 128x196 or 176x144.
Default video name—Define a default name, or select the
date.
Memory in use—Define the default memory store: phone
memory or memory card.
Gallery
To store and organise your images, sound clips, playlists,
video clips, streaming links, and .ram files, press
, and
select Gallery.
Select Images
, Video clips , Tracks
, Links
, or All files
, and press
, Sound clips
to open it.
You can browse, open, and create folders; and mark, copy,
and move items to folders. Sound clips, video clips, .ram
files, and streaming links are opened and played in the
RealPlayer application. See ‘RealPlayer™’, p. 39.
Tip! You can transfer images from your phone to a
compatible PC with Nokia Phone Browser available in
Nokia PC Suite. See the CD-ROM supplied with your
phone.
Tip! You can transfer music files from your phone to
your memory card with Nokia Audio Manager available
in Nokia PC Suite. See the CD-ROM supplied with your
phone.
Tip! You can also transfer files from your phone to
your memory card using the MMC card reader supplied
in the sales package.
Press
to open a file or a folder. Images are opened in
the image viewer. See ‘View images’, p. 35.
To copy or move files to the memory card or to phone
memory, select a file and Options > Organise > Copy to
memory card/Move to memory card or Copy to phone
mem./Move to phone mem.. Files stored on the memory
card are indicated with .
To download files into Gallery in one of the main folders
using the browser, select
Graphic downls., Video
downlds., Track downlds., or Sound downlds.. The browser
opens, and you can select a bookmark from which site to
download.
Camera and Gallery
R1115_en.book Page 35 Thursday, February 10, 2005 9:20 AM
To search for a file, select Options > Find. Start to enter a
search string (for example, the name or date of the file you
are searching). Files that match your search are shown.
View images
Pictures taken with Camera are stored in Gallery. Images
can also be sent to you in a multimedia message, as an
e-mail attachment, or through a Bluetooth connection. To
be able to view a received image in the gallery, you need
to save it in the phone memory or on a memory card.
Open the Images folder
in Gallery to start the image
viewer, select an image, and press
to view it.
Options when viewing an image are Send, Set as
wallpaper, Rotate, Zoom in/Zoom out, Full screen,
Delete, Rename, View details, Add to 'Go to', Help, and
Exit.
35
Camera and Gallery
R1115_en.book Page 36 Thursday, February 10, 2005 9:20 AM
36
To zoom an image, select Options > Zoom in or Zoom
out. You can see the zooming ratio at the top of the
display. The zooming ratio is not stored permanently.
To see more of the image, select Options > Full screen.
The panes around the image are removed. To move the
focus when you are zooming an image or viewing an
image in full screen mode, use the scroll key.
To rotate the image, select Options > Rotate. Press and
hold
to return to the normal view.
Imaging
Video editor
To create custom video clips, press
, and select
Imaging > Vid. editor. You can combine and trim video
clips, and add sound clips, transitions, and effects.
Transitions are visual effects that you can add in the
beginning and end of the video or between the video clips.
Edit video, sound, and transitions
1 Mark and select one or more video clips.
2 Select Options > Edit. In the edit video view, you can
insert video clips to make a custom video clip, and edit
the clips by trimming and adding effects. You can add
sound clips and change their duration.
Tip! To take a snapshot of a video clip, select
Options > Take snapshot in the play view, edit
preview view, or in the cut view.
To modify the video, select one of the following
options:
Preview—Previews the custom video clip.
Insert:
• Video clip—Inserts the selected video clip. A
Imaging
R1115_en.book Page 37 Thursday, February 10, 2005 9:20 AM
thumbnail of the video clip is shown in the main
view. A thumbnail consists of the first non-black
view of the video clip. The name and length of the
selected video clip is also shown.
• Sound clip—Inserts the selected sound clip. The
name and length of the selected sound clip is shown
in the main view.
• New sound clip—Records a new sound clip to the
selected location.
Cut—Trims the video clip or a sound clip in the cut
video clip or in the cut sound clip view.
Edit video clip:
• Move—Moves the video clip to the selected location.
• Add colour effect—Inserts a colour effect on the
video clip.
• Use slow motion—Slows the speed of the video clip.
• Mute sound/Unmute sound — Mutes or unmutes the
original video clip sound.
• Remove—Removes the video clip from the video.
Edit sound clip:
• Move—Moves the sound clip to the selected
location.
• Set duration—Edits the sound clip length.
• Remove—Removes the sound clip from the video.
37
Imaging
R1115_en.book Page 38 Thursday, February 10, 2005 9:20 AM
• Duplicate—Makes a copy of the selected video clip
or sound clip.
Edit transition—There are three types of transitions: at
the start of a video, at the end of a video, and
transitions between video clips. A start transition can
be selected when the first transition of the video is
active.
3 Select Save to save your video. Define the Memory in
use in Settings. The default is the phone memory.
Tip! In the settings view you can define the
Default video name, Default sc. shot name, and
Memory in use.
Select Send > Via multimedia, Via Bluetooth, or Via e-mail
if you want to send the video. Contact your service
provider for details of the maximum multimedia message
size that you can send. If your video is too large to be sent
in a multimedia message,
appears.
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using a Bluetooth
connection. ‘Send data using a Bluetooth connection’, p.
81. You can also transfer your videos using a Bluetooth
connection into your Bluetooth-enabled personal
computer, or by using a memory card reader (internal/
external).
Image manager
To browse your images visually, press
, and select
Imaging > Image mgr.
1 Press
to select Phone
mem. or Memory card
memory. Image mgr. also
shows how many folders
or images are in the
selected folder.
2 Open a folder to browse
your images visually. Press
and
to move
between images and
folders. Press
to view
an image.
Press
and
simultaneously to mark images for
an image show. A check mark is shown next to a
selected image. Select Options > Image show. Press
and
to view the next or previous image in the show.
Image print
Use Image print to print your images using USB
(PictBridge-compliant), a Bluetooth connection, or your
38
MMC. You can select from a list of available printers
displayed in the printer selection view.
Note: To print to a PictBridge-compliant printer,
select Image print before you connect the USB cable.
Press
, and select Imaging > Image print. Select the
images you want to print.
Options in the image selection view are Print, Mark/
Unmark, Open (displayed when you select an album),
Help, and Exit.
Printer selection
Once you have selected images you want to print, a list of
available printing devices is displayed. If you have
connected a PictBridge-compliant USB printer using the
DKU-2 cable supplied with the phone, the printer is
automatically displayed.
Select the device you want to use. The print preview screen
is displayed.
Print preview
After you select a printing device, the images that you
selected are displayed using predefined layouts. To change
the layout, use the left and right scroll key to scroll through
the available layouts for the selected printer. If you
selected more images than will fit on a single page, scroll
up or down to display the additional pages.
Options in print preview are Print, Settings, Help,
and Exit.
Imaging
R1115_en.book Page 39 Thursday, February 10, 2005 9:20 AM
Print settings
The available options vary depending on the capabilities of
the printing device you selected.
To select the paper size, select Paper size, select the size of
paper from the list, and select OK. Select Cancel to return
to the previous view.
RealPlayer™
Press
, and select Imaging > RealPlayer. With
RealPlayer, you can play video clips, sound clips, and
playlists, or stream media files over the air. A streaming
link can be activated when you are browsing Web pages,
or it can be stored in the phone memory or memory card.
RealPlayer supports files with extensions such as .aac,
.awb, .m4a, .mid, .mp3, and .wav. However, RealPlayer
does not necessarily support all file formats or all the
variations of file formats. For example, RealPlayer
attempts to open all .mp4 files, but some .mp4 files may
39
Imaging
R1115_en.book Page 40 Thursday, February 10, 2005 9:20 AM
include content that is not compliant with 3GPP
standards and, therefore, is not supported by this phone.
Options in RealPlayer when a clip is selected are
Play, Play in full screen/Continue, Continue in full scr.;
Stop, Mute/Unmute, Clip details, Send, Settings, Help,
and Exit.
Play video or sound clips
1 To play a media file stored in phone memory or on the
memory card, select Options > Open and select:
Most recent clips—To play one of the last six files
played in RealPlayer.
Saved clip—To play a file saved in Gallery. See ‘Gallery’,
p. 35.
2 Scroll to a file, and press
to play the file.
Tip! To view a video clip in full screen mode, press
. Press again to change back to normal screen
mode.
Icons in RealPlayer:
Repeat
Random
Repeat and random
Loudspeaker muted
40
To mute the sound, press and hold
until the
indicator is displayed. To turn on the sound, press and hold
until you see the
indicator.
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your phone.
Contact your service provider for more information.
Note: In RealPlayer, you can only open an rtsp:// URL
address. However, RealPlayer will recognise an http link
to a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your phone connects to the site and
start loading the content.
Receive RealPlayer settings
Shortcuts during play:
To fast forward, press and hold
To rewind through the media file, press and hold
You may receive RealPlayer settings in a special text
message from the network operator or service provider.
See ‘Data and settings’, p. 49. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video—To have RealPlayer automatically repeat video clips
after they finish playing.
Audio settings—To select if you want to repeat playing of
track lists and play sound clips on a track list in random
order.
Connection settings—To select whether to use a proxy
server, change the default access point, and set the timeouts and port range used when connecting. Contact your
service provider for the correct settings.
Proxy settings:
• Use proxy—To use a proxy server, select Yes.
• Proxy serv. address—Enter the IP address of the proxy
server.
• Proxy port number—Enter the port number of the
proxy server.
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
use them to provide additional security or speed up
access to browser pages that contain sound or video
clips.
Network settings:
• Default access point—Scroll to the access point you
want to use to connect to the Internet, and press
• Online time—Set the time for RealPlayer to disconnect
from the network when you have paused a media clip
playing through a network link, select User defined,
and press
. Enter the time, and select OK.
• Connection time-out—Press
or
to set the
maximum time to elapse between selecting a network
link and connecting to the media server, and select OK.
• Server time-out—Press
or
to set the maximum
time to wait for a response from the media server
before disconnecting, and select OK.
• Lowest UDP port—Enter the lowest port number of the
server port range. The minimum value is 6970.
• Highest UDP port—Enter the highest port number of
the server port range. The maximum value is 32000.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
Imaging
R1115_en.book Page 41 Thursday, February 10, 2005 9:20 AM
41
Messaging
R1115_en.book Page 42 Thursday, February 10, 2005 9:20 AM
Messaging
Press
, and select Messaging. In Messaging, you can
create, send, receive, view, edit, and organise text
messages, multimedia messages, e-mail messages, and
special text messages containing data. You can also
receive messages and data through a Bluetooth
connection, receive Web service messages, cell broadcast
messages, and send service commands.
Options in the Messaging main view are Open,
Create message, Connect (shown if you have defined
mailbox settings)/Disconnect (shown if a connection
to the mailbox is active), SIM messages, Cell
broadcast, Service command, Settings, Help, and
Exit.
Note: These functions can only be used if they are
supported by your network operator or service
provider. Only devices that offer compatible
multimedia message, or e-mail features can receive
and display these messages. Some networks might
provide the recipient device with a Web page link to
view multimedia messages.
When you open Messaging, you can see the New message
function and a list of folders:
42
Inbox—Contains received messages except e-mail
and cell broadcast messages. E-mail messages are stored in
the Mailbox.
My folders—For organising your messages into
folders.
Mailbox—In Mailbox you can connect to your
remote mailbox to retrieve your new e-mail messages or
view your previously retrieved e-mail messages offline. See
‘E-mail’, p. 55.
Drafts—Stores draft messages that have not been
sent.
Sent—Stores the last 15 messages that have been
sent excluding messages sent using a Bluetooth
connection. To change the number of messages to be
saved, see ‘Other settings’, p. 57.
Outbox—A temporary storage place for messages
waiting to be sent.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service). Receiving a
delivery report of a multimedia message that has been sent
to an e-mail address might not be possible.
Tip! When you have opened any of the default folders,
you can switch between the folders by pressing
or
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options > Service
command in the main view of Messaging.
Cell broadcast is a network service that allows you to
receive messages on various topics, such as weather or
traffic conditions from your service provider. For available
topics and relevant topic numbers, contact your service
provider. In the main view of Messaging, select Options >
Cell broadcast. In the main view you can see the status of
a topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Options in Cell broadcast are Open, Subscribe/
Unsubscribe, Hotmark/Remove hotmark, Topic,
Settings, Help, and Exit.
A packet data connection may prevent cell broadcast
reception.
Write text
Traditional text input
and
indicate the selected case.
means
that the first letter of the word is written in upper case,
and all other letters are automatically written in lower
case.
indicates number mode.
Messaging
R1115_en.book Page 43 Thursday, February 10, 2005 9:20 AM
is shown on the top right of the display when you
are writing text using traditional text input.
• Press a number key (
—
) repeatedly
until the desired character appears. There are more
characters available for a number key than are printed
on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and
hold
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To erase a character, press
. Press and hold
to
clear more than one character.
• The most common punctuation marks are available
under
. Press
repeatedly to reach the
desired punctuation mark.
43
Messaging
R1115_en.book Page 44 Thursday, February 10, 2005 9:20 AM
Press
to open a list of special characters. Use
to move through the list, and press Select to select
a character.
• To insert a space, press
. To move the cursor to
the next line, press
three times.
• To switch between the different character cases Abc,
abc, and ABC, press
Predictive text input—Dictionary
You can enter any letter with a single key press. Predictive
text input is based on a built-in dictionary to which you
can also add new words. When the dictionary becomes
full, the latest added word replaces the oldest.
1 To activate predictive
text input, press
, and
select Dictionary on. This
activates predictive text
input for all editors in the
phone.
is shown
on the top right of the
display when you write
text using predictive text
input.
2 To write the desired word, press the keys
—
. Press each key only once for one letter. For
example, to write ‘Nokia’ when the English dictionary
44
is selected, press
for N,
for o,
for k,
for i, and
for a.
The word suggestion changes after each key press.
3 When you finish writing the word and it is correct, to
confirm it, press
, or press
to add a space.
If the word is not correct, press
repeatedly to
view the matching words the dictionary has found one
by one, or press
, and select Dictionary > Matches.
If the ? character is shown after the word, the word you
intended to write is not in the dictionary. To add a word
to the dictionary, select Spell, enter the word (up to 32
letters) using traditional text input, and select OK. The
word is added to the dictionary. When the dictionary
becomes full, a new word replaces the oldest added
word.
4 Start writing the next word.
Tip! To set predictive text input on or off, press
twice quickly.
Tips on predictive text input
To erase a character, press
more than one character.
. Press and hold
to clear
To change between the different character cases Abc, abc,
and ABC, press
. If you press
quickly
twice, predictive text input is turned off.
Tip! Predictive text input tries to guess which
commonly used punctuation mark (.,?!‘) is needed. The
order and availability of the punctuation marks depend
on the language of the dictionary.
To insert a number in letter mode, press and hold the
desired number key.
To switch between letter and number mode, press and hold
The most common punctuation marks are available under
. Press
and then
repeatedly to
search for the desired punctuation mark.
Press and hold
to open a list of special characters.
Press
repeatedly to view the matching words the
dictionary has found one by one.
Press
, select Dictionary, and press
the following options:
to select one of
Matches—To view a list of words that correspond to your
key presses.
Insert word—To add a word (up to 32 letters) to the
dictionary by using traditional text input. When the
dictionary becomes full, a new word replaces the oldest
added word.
Edit word—To edit the word using traditional text input.
This is available if the word is active (underlined).
Tip! When you press
, the following options
appear (depending on the editing mode): Dictionary
(predictive text input), Alpha mode (traditional text
input), Number mode, Cut (if text has been selected),
Copy (if text has been selected), Paste (when text has
been cut or copied first), Insert number, Insert symbol,
and Writing language: (changes the input language
for all editors in the phone).
Messaging
R1115_en.book Page 45 Thursday, February 10, 2005 9:20 AM
Write compound words
Write the first half of a compound word; to confirm it,
press
. Write the last part of the compound word. To
complete the compound word, press
to add a
space.
Turn predictive text input off
Press
, and select Dictionary > Off to turn predictive
text input off for all editors in the phone.
Copy text to clipboard
1 To select letters and words, press and hold
. At the
same time, press
or
. As the selection moves,
text is highlighted.
2 To copy the text to the clipboard, while still holding
, press Copy.
3 To insert the text into a document, press and hold
and press Paste, or press
once, and select Paste.
To select lines of text, press and hold
. At the same
time press
or
45
Messaging
R1115_en.book Page 46 Thursday, February 10, 2005 9:20 AM
To remove the selected text from the document, press
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Tip! You can start to create a message from any
application that has the option Send. Select a file
(image or text) to be added to the message, and select
Options > Send.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
place. See ‘Receive MMS and e-mail settings’, p. 48 and
‘E-mail’, p. 55.
Options in the message editor are Send, Add
recipient, Insert, Attachments (e-mail), Preview
(MMS), Objects (MMS), Remove (MMS), Delete, Check
contacts, Message details, Sending options, Help, and
Exit.
1 Select New message. A list of message options opens.
Text message—to send a text message.
46
Multimedia message—to send a multimedia message
(MMS).
E-mail—to send an e-mail. If you have not set up your
e-mail account, you are prompted to do so.
Postcard—to send a postcard.
Tip! Scroll to a contact, and press
to mark it.
You can mark several recipients at a time.
Press
to select recipients or groups from contacts,
or enter the recipient’s phone number or e-mail
address. Press
to add a semicolon (;) that
separates the recipients. You can also copy and paste
the number or address from the clipboard.
Press
to move to the message field.
Write the message.
To add a media object to a
multimedia message,
select Options > Insert
object > Image, Sound
clip, or Video clip. When
sound is added,
is
shown in the navigation
bar.
If you select Insert new >
Sound clip, Recorder
opens, and you can record
a new sound. Press Select,
the new sound is automatically saved, and a copy is
inserted in the message. Select Options > Preview to
see what the multimedia message looks like.
7 To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note. E-mail
attachments are indicated by , in the navigation bar.
8 To send the message, select Options > Send, or press
Note: Your device supports the sending of text
messages beyond the normal 160-character limit. If
your message exceeds 160 characters, it will be sent as
a series of two or more messages and sending may cost
you more. In the navigation bar, you can see the
message length indicator counting backwards from
160. For example, 10 (2) means that you can still add
10 characters for the text to be sent as two messages.
Some characters may take more space than others.
Note: E-mail messages are automatically placed in
Outbox before sending. If sending does not succeed,
the e-mail is left in the Outbox with the Failed status.
Tip! When you send a multimedia message to an email address or a device that supports the receiving of
large images, use the larger image size. If you are not
sure of the receiving device, or the network does not
support sending large files, it is recommended that you
use a smaller image size or a sound clip that is no
longer than 15 seconds. To change the setting, select
Options > Settings > Multimedia message > Image
size in the Messaging main view.
Tip! In Messaging you can also create presentations
and send them in a multimedia message. In the
multimedia message editor view, select Options >
Create presentation (shown only if MMS creation mode
is set to Guided or Free). See ‘Multimedia messages’, p.
54.
Messaging
R1115_en.book Page 47 Thursday, February 10, 2005 9:20 AM
Postcard (network service)
To create and send a postcard, press
, and select
Messaging > Postcard. A postcard must contain the
recipient's name and address, an image, and text.
Postcards are sent using the Outbox. New, edited,
unfinished, or changed postcards are automatically saved
in the Drafts folder. For more information, see the
‘Messaging’ chapter, p.42.
Select Options and from the following:
Send—to send a completed postcard to the recipient.
Add recipient—to add the recipient's name and address.
You can also copy the name of a recipient from Contacts.
To access Contacts, scroll to the empty field for the
recipient's name, and press
47
Messaging
R1115_en.book Page 48 Thursday, February 10, 2005 9:20 AM
Insert—New image to take a photo with the camera to
insert in the postcard or Image to insert an image stored
in your phone.
Preview—to view a completed postcard. To view the front
and back of the postcard, press the left or right scroll key.
Delete—to delete the postcard.
Postcard details—to view the subject, date and time, type,
and recipient of the postcard.
You can create a postcard in the following ways.
• Press
, and select Messaging. Select New message
> Postcard from the main view or Options > Create
message > Postcard.
• After an image has been taken with the Cameras
application, select Options > Send > Postcard.
• After selecting an image in the Gallery, select Options
> Send > Postcard.
Receive MMS and e-mail settings
You may receive the settings in a text message from your
network operator or service provider. See ‘Data and
settings’, p. 49.
For availability of and subscription to data services,
contact your network operator or service provider. Follow
the instructions given by your service provider.
48
Enter the MMS settings manually
1 Select Tools > Settings > Connection > Access points,
and define the settings for a multimedia messaging
access point. See ‘Connection settings’, p. 89.
2 Select Messaging > Options > Settings > Multimedia
message > Access point in use and the access point
you created to be used as the preferred connection. See
also ‘Multimedia messages’, p. 54.
Tip! To send files other than sounds and notes as
attachments, open the appropriate application, and
select Send > Via e-mail, if available.
Before you can send, receive, retrieve, reply to, and forward
e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
‘Connection settings’, p. 89.
• Define your e-mail settings correctly. See ‘E-mail’, p.
55. You need to have a separate e-mail account. Follow
the instructions given by your remote mailbox and
Internet service provider (ISP).
Inbox—receive messages
Inbox icons:
Unread messages in Inbox
Unread text message
Unread multimedia message
Data received through a Bluetooth connection
When you receive a message,
and 1 new message are
shown in the standby mode. Press Show to open the
message. To open a message in Inbox, scroll to it, and press
Multimedia messages
Important: Multimedia message objects may
contain viruses or otherwise be harmful to your device
or PC. Do not open any attachment if you are not sure
of the trustworthiness of the sender.
When you open a multimedia message ( ), you may see
an image and a message, and simultaneously listen to a
sound through the loudspeaker (
is shown if sound is
included). Click the arrow in the icon to listen to the sound.
To see what kinds of media objects have been included in
the multimedia message, open the message, and select
Options > Objects. You can choose to save a multimedia
object file in your phone or send it, for example, through a
Bluetooth connection to another compatible device.
You may also receive multimedia presentations. You can
view these presentations by selecting Options > Play
presentation.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
Data and settings
Messaging
R1115_en.book Page 49 Thursday, February 10, 2005 9:20 AM
Your phone can receive many kinds of text messages that
contain data ( ), also called over-the-air (OTA)
messages:
Configuration message—You may receive a text message
service number, voice mailbox number, Internet access
point settings, access point login script settings, or e-mail
settings from your network operator, service provider, or
company information management department in a
configuration message. To save the settings, select
Options > Save all.
Business card—To save the information to Contacts, select
Options > Save business card. Certificates or sound files
attached to the business card are not saved.
Ringing tone—To save the ringing tone, select Options >
Save.
Operator logo—For the logo to be shown in the standby
mode instead of the network operator’s own
identification, select Options > Save.
Tip! To change the default access point settings for
multimedia messaging, select Messaging > Options >
49
Messaging
R1115_en.book Page 50 Thursday, February 10, 2005 9:20 AM
Settings > Multimedia message > Access point in
use.
Calendar entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Web, select Options > Add to bookmarks. If the
message contains both access point settings and
bookmarks, to save the data, select Options > Save all.
E-mail notification—Tells you how many new e-mails
you have in your remote mailbox. An extended
notification may list more detailed information.
Tip! If you receive a vCard file that has a picture
attached, the picture is saved to contacts.
Web service messages
Web service messages ( ) are notifications (for example,
news headlines) and may contain a text message or a link.
For availability and subscription, contact your service
provider.
My folders
In My folders, you can organise your messages into
folders, create new folders, and rename and delete folders.
50
Tip! You can use texts in the templates folder to avoid
rewriting messages that you send often.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. See ‘E-mail’, p. 55.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox,
you can choose whether you
want to view the previously
retrieved e-mail messages
and e-mail headings offline
or connect to the e-mail
server.
When you scroll to your
mailbox, and press
, the
phone asks you if you want to
Connect to mailbox?
Select Yes to connect to your mailbox, and retrieve new email headings or messages. When you view messages
online, you are continuously connected to a remote
mailbox using a packet data connection. See also
‘Connection settings’, p. 89.
Select No to view previously retrieved e-mail messages
offline. When you view e-mail messages offline, your
phone is not connected to the remote mailbox.
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to a remote mailbox.
Important: E-mail messages may contain viruses or
otherwise be harmful to your device or PC. Do not open
any attachment if you are not sure of the
trustworthiness of the sender.
1 When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail.
New—to retrieve all new e-mail messages to your
phone.
Selected—to retrieve only the e-mail messages that
have been marked.
All—to retrieve all messages from the mailbox.
To stop retrieving messages, select Cancel.
2 After you have retrieved the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status icons:
New e-mail (offline or online mode): the content
has not been retrieved to your phone (arrow outwards).
New e-mail: the content has been retrieved to your
phone (arrow inwards).
The e-mail message has been read.
The e-mail heading that has been read and the
message content has been deleted from the phone.
3 To open an e-mail message, press . If the e-mail
message has not been retrieved (arrow in the icon is
pointing outwards) and you are offline, you are asked
if you want to retrieve this message from the mailbox.
Messaging
R1115_en.book Page 51 Thursday, February 10, 2005 9:20 AM
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the phone; select Options >
Retrieve. In the Attachments view, you can retrieve,
open, or save attachments. You can also send attachments
using a Bluetooth connection.
Tip! If your mailbox uses the IMAP4 protocol, you can
define how many messages to retrieve, and whether to
retrieve the attachments. With the POP3 protocol, the
options are Headers only, Partially (kB), or Msgs. &
attachs..
51
Messaging
R1115_en.book Page 52 Thursday, February 10, 2005 9:20 AM
Delete e-mail messages
during the next connection (
Undelete.
To delete the contents of an e-mail message from the
phone while still retaining it in the remote mailbox, select
Options > Delete msg. from: > Phone only.
Disconnect from the mailbox
The phone mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your phone. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your phone to the remote mailbox again
to update the status.
Tip! To copy an e-mail from the remote mailbox to a
folder under My folders, select Options > Copy to
folder, a folder from the list, and OK.
To delete an e-mail from the phone and the remote
mailbox, select Options > Delete msg. from: > Phone
and server.
If you are offline, the e-mail is deleted first from your
phone. During the next connection to the remote mailbox,
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
To cancel deleting an e-mail from the phone and server,
scroll to an e-mail that has been marked to be deleted
52
), and select Options >
When you are online, select Options > Disconnect to end
the packet data connection to the remote mailbox.
Tip! You can also leave your mailbox connection open
and the new e-mails (Headers only as default) will be
retrieved from the remote mailbox to your phone
automatically (only if the IMAP IDLE function is
supported by your server). To leave the messaging
application open in the background, press
twice.
Leaving the connection open may increase your call
costs due to the data traffic.
View e-mail messages when offline
When you open Mailbox the next time and you want to
view and read the e-mail messages offline, answer No to
the Connect to mailbox? query. You can read the
previously retrieved e-mail headings, the retrieved e-mail
messages, or both. You can also write new, reply to, or
forward e-mail to be sent the next time you connect to the
mailbox.
Outbox—messages waiting View messages on a SIM card
to be sent
Before you can view SIM messages, you need to copy them
Outbox is a temporary storage place for messages waiting
to be sent.
Status of the messages in Outbox are:
Sending—A connection is being made and the message is
being sent.
Waiting/Queued—The message will be sent when previous
messages of a similar type have been sent.
Resend at %U (time)—The phone will try to send the
message again after a time-out period. Select Send to
restart the sending immediately.
Deferred—You can set documents to be on hold while they
are in Outbox. Scroll to a message that is being sent, and
select Options > Defer sending.
Failed—The maximum number of sending attempts has
been reached. Sending has failed. If you were trying to
send a text message, open the message, and check that the
sending options are correct.
Example: Messages are placed in the outbox, for
example, when your phone is outside network coverage.
You can also schedule e-mail messages to be sent the next
time you connect to your remote mailbox.
to a folder in your phone.
1 In the Messaging main view, select Options > SIM
messages.
2 Select Options > Mark/Unmark > Mark or Mark all
to mark messages.
3 Select Options > Copy. A list of folders opens.
4 Select a folder and OK to start copying. Open the
folder to view the messages.
Messaging
R1115_en.book Page 53 Thursday, February 10, 2005 9:20 AM
Messaging settings
Text messages
Select Messaging > Options > Settings > Text message.
Message centres—Lists all the text message centres that
have been defined.
Msg. centre in use—Select which message centre is used
for delivering text messages.
Receive report (network service)—To request the network
to send delivery reports on your messages. When set to
No, only the Sent status is shown in Log. See ‘Log’, p. 23.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is removed
53
Messaging
R1115_en.book Page 54 Thursday, February 10, 2005 9:20 AM
from the text message centre. The network must support
this feature. Maximum time is the maximum amount of
time allowed by the network.
Message sent as—Change this option only if you are sure
that your message centre is able to convert text messages
into these other formats. Contact your network operator.
Preferred connection—You can send text messages
through the normal GSM network or through packet data,
if supported by the network. See ‘Connection settings’, p.
89.
Reply via same ctr. (network service)—Choose Yes, if you
want the reply message to be sent using the same text
message centre number.
Options when editing text message centre settings
are Edit, New msg. centre, Delete, Help, and Exit.
Add a new text message centre
1 Select Message centres > Options > New msg.
centre.
2 Press , write a name for the message centre, and
select OK.
3 Press
and
, and write the number of the text
message centre. You receive the number from your
service provider.
4 Select OK.
54
5 To use the new settings, go back to the settings view.
Scroll to Msg. centre in use, and select the new
message centre.
Multimedia messages
Select Messaging > Options > Settings > Multimedia
message.
Image size—Define the size of the image in a multimedia
message. The options are Original (shown only when the
MMS creation mode is set to Guided or Free), Small, and
Large. Select Original to increase the size of the
multimedia message.
MMS creation mode—If you select Guided, the phone
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the phone
prevents you from sending messages that are not
supported.
Access point in use (Must be defined)—Select which
access point is used as the preferred connection for the
multimedia message centre.
Recept. in home net.—Select whether you want the
reception of the MMS messages in the home network to be
Automatic, Defer retrieval, or Off. If you select Defer
retrieval, the multimedia messaging centre saves the
message. To retrieve the message later, set to Automatic.
Reception if roaming—Select how you want the MMS
messages to be retrieved outside the home network. When
you are outside your home network, sending and receiving
multimedia messages may cost you more. If Reception if
roaming > Automatic is selected, your phone automatically
makes an active packet data connection to retrieve the
message. Select Reception if roaming > Off if you do not
want to receive multimedia messages when you are
outside your home network.
Allow anon. messages—Select No if you want to reject
messages coming from an anonymous sender.
Receive adverts—Define whether you want to receive
multimedia message advertisements or not.
Receive report (network service)—Select Yes if you want
the status of the sent message to be shown in the Log.
Note: Receiving a delivery report of a multimedia
message that has been sent to an e-mail address might
not be possible.
Tip! You may also obtain the multimedia and e-mail
settings from your service provider through an OTA
message. Contact your service provider for more
information. See ‘Data and settings’ on p. 49.
E-mail
Messaging
R1115_en.book Page 55 Thursday, February 10, 2005 9:20 AM
Select Messaging > Options > Settings > E-mail, or in
the mailbox main view, select Options > E-mail settings,
and from the following:
Mailbox in use—Select which mailbox you want to use for
sending e-mail.
Mailboxes—Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to do so. Select a mailbox to change the
settings:
Mailbox settings:
Mailbox name—Enter a descriptive name for the mailbox.
Deny report sending—Select Yes if you do not want your
phone to send delivery reports of received multimedia
messages.
Access point in use (Must be defined)—Choose an
Internet access point (IAP) for the mailbox. See
‘Connection settings’, p. 89.
Message validity—If the recipient of a message cannot be
reached within the validity period, the message is removed
from the multimedia messaging centre. The network must
support this feature. Maximum time is the maximum
amount of time allowed by the network.
My e-mail address (Must be defined)—Enter the e-mail
address given to you by your service provider. Replies to
your messages are sent to this address.
55
Messaging
R1115_en.book Page 56 Thursday, February 10, 2005 9:20 AM
Outgoing mail server (Must be defined)—Enter the IP
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server
of your network operator. Contact your service provider
for more information.
Send message—Define how e-mail is sent from your
phone. Select Immediately for the device to connect to
the mailbox when you select Send message. Select When
conn. avail.—E-mail is sent when the connection to the
remote mailbox is available.
User name—Enter your user name, given to you by your
service provider.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail server (Must be defined)—Enter the IP
address or host name of the mail server that receives your
e-mail.
Mailbox type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you are using the POP3
protocol, e-mail messages are not updated automatically
in online mode. To see the latest e-mail messages, you
56
must disconnect and make a new connection to your
mailbox.
Security (ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
APOP secure login (not shown if IMAP4 is selected for
Mailbox type)—Used with the POP3 protocol to encrypt
the sending of passwords to the remote e-mail server while
connecting to the mailbox.
User settings:
E-mails to retrieve (not shown if the e-mail protocol is set
to POP3)—Define how many new e-mails are retrieved to
the mailbox.
Retrieve—Define which parts of the e-mails are retrieved:
Headers only, Partially (kB), or Msgs. & attachs. (not shown
if the e-mail protocol is set to IMAP4).
Retrieve attachments (not shown if the e-mail protocol is
set to POP3)—Choose whether you want to retrieve e-mail
with or without attachments.
Subscribed folders (not shown if the e-mail protocol is set
to POP3)—You can subscribe to other folders in the remote
mailbox as well and retrieve content from those folders.
Send copy to self—Select Yes to save a copy of the e-mail
to your remote mailbox and to the address defined in My
e-mail address.
Include signature—Select Yes if you want to attach a
signature to your e-mail messages.
My name—Enter your own name here. Your name replaces
your e-mail address in the recipient’s phone when the
recipient’s phone supports this function.
Language—All allows you to receive cell broadcast
messages in all supported languages. Selected allows you
to choose in which languages you wish to receive cell
broadcast messages. If you cannot find the desired
language, select Other.
Header retrieval—When this function is on, messages are
retrieved automatically. You can define when, and how
often, the messages are retrieved.
Topic detection—If you select On, the phone
automatically searches for new topic numbers, and saves
the new numbers without a name to the topic list. Select
Off if you do not want to save new topic numbers
automatically.
Activating Header retrieval may increase your call costs
due to the data traffic.
Other settings
Automatic retrieval:
Web service messages
Select Messaging > Options > Settings > Service
message. Choose whether you want to receive service
messages. If you want to set the phone to automatically
activate the browser and start a network connection to
retrieve content when the phone receives a service
message, select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider, and select Messaging > Options >
Settings > Cell broadcast to change the settings.
Messaging
R1115_en.book Page 57 Thursday, February 10, 2005 9:20 AM
Select Messaging > Options > Settings > Other.
Save sent messages—Choose if you want to save a copy
of every text message, multimedia message, or e-mail that
you have sent to the Sent folder.
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message
is deleted.
Memory in use—Choose the memory to where you want to
save your messages: Phone memory or Memory card.
Tip! If Memory card is selected, activate the offline
profile before opening the memory card slot door or
removing the memory card. When the memory card is
57
Messaging
R1115_en.book Page 58 Thursday, February 10, 2005 9:20 AM
58
not available, messages are saved in the phone
memory.
E-mail notification—Choose whether you want to see
the new e-mail indications, a tone, or a note when new
mail is received to the mailbox.
Calendar
Shortcut: Press any key (
—
) in any
calendar view. A meeting entry opens, and the
characters you enter are added to the Subject field.
Create calendar entries
1 Press
, and select
Calendar > Options > New
entry and from the
following:
Meeting—To remind you
of an appointment that
has a specific date and
time.
Memo—To write a general
entry for a day.
Anniversary—To remind
you of birthdays or special
dates. Anniversary entries are repeated every year.
2 Fill in the fields. Use
to move between fields.
Alarm (meetings only)—Select On, and press
to fill
in the Alarm time and Alarm date fields.
in the day
view indicates an alarm. To stop a calendar alarm,
select Silence to turn off the calendar alarm tone. The
reminder text stays on the screen. Select Stop to end
the calendar alarm. Select Snooze to set the alarm to
snooze.
Repeat—Press
to change the entry to be repeating
( is shown in the day view).
Repeat until—You can set an end date for the repeated
entry.
Synchronisation:
Private—After synchronisation the calendar entry can
be seen only by you and it will not be shown to others
with online access to view the calendar.
Public—The calendar entry is shown to others who
have access to view your calendar online.
None—The calendar entry will not be copied to your PC
when you synchronise.
3 To save the entry, select Done.
Tip! To send a calendar note to a compatible phone,
select Options > Send > Via text message, Via
multimedia, or Via Bluetooth.
Calendar
R1115_en.book Page 59 Thursday, February 10, 2005 9:20 AM
Calendar views
Tip! Select Options > Settings to change the view
that is shown when you open the calendar or the
starting day of the week.
59
Calendar
R1115_en.book Page 60 Thursday, February 10, 2005 9:20 AM
In the month view, dates that have calendar entries are
marked with a small triangle at the right bottom corner.
In the week view, memos and anniversaries are placed
before 8 o’clock.
To delete a calendar alarm, open the entry in which you
want to delete an alarm, and select Alarm > Off.
Icons in the day and week views:
Remove calendar entries
Memo
Anniversary
There is no icon for Meeting.
Removing past entries in Calendar saves space in your
phone memory.m
To go to a certain date, select Options > Go to date, write
the date, and select OK.
To remove more than one event at a time, go to the Month
view and select Options > Delete entry and one of the
following:
Press
to jump to today.
Tip! You can move calendar and to-do data from
many different Nokia phones to your phone or
synchronise your calendar and to-do to a compatible
PC using Nokia PC Suite. See the CD-ROM supplied
with the phone.
Set a calendar alarm
You can set an alarm to remind you of a meeting. This
option is not available for notes.
1 Open an entry in which you want to set an alarm, and
select Alarm > On.
2 Set the Alarm time and Alarm date.
3 Scroll down to Repeat, and press
to select how
often you want the alarm to be repeated.
60
4 Select Done.
Before date—Deletes all calendar entries that take place
before a certain date you define.
All entries—Deletes all calendar entries.
Calendar settings
To modify the Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options > Settings.
R1115_en.book Page 61 Thursday, February 10, 2005 9:20 AM
Various service providers maintain pages specifically
designed for mobile devices. To access these pages, press
, and select Web. These pages use the wireless markup
language (WML), extensible hypertext markup language
(XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and tariffs with
your network operator or service provider. Service
providers will also give you instructions on how to use their
services.
Shortcut: To start a connection, press and hold
in the standby mode.
Access the Web
• Save the settings that are needed to access the Web
page that you want to use. See the sections ‘Receive
browser settings’, p. 61 or ‘Enter the settings manually’,
p. 61.
• Make a connection to the Web. See ‘Make a
connection’, p. 62.
• Start browsing the pages. See ‘Browse’, p. 63.
• End the connection to the Web. See ‘End a connection’,
p. 65.
Web
Web
Receive browser settings
Tip! Settings may be available on the Web site of a
network operator or service provider.
You may receive Web service settings in a special text
message from the network operator or service provider
that offers the Web page. See ‘Data and settings’, p. 49.
For more information, contact your network operator or
service provider.
Enter the settings manually
Follow the instructions given to you by your service
provider.
1 Select Tools > Settings > Connection > Access
points, and define the settings for an access point. See
‘Connection settings’, p. 89.
2 Select Web > Options > Bookmark manager > Add
bookmark. Write a name for the bookmark and the
address of the page defined for the current access
point.
61
Web
R1115_en.book Page 62 Thursday, February 10, 2005 9:20 AM
Bookmarks view
Glossary: A bookmark consists of an Internet address
(mandatory), bookmark title, access point, and if the
Web page requires, a user name and password.
Options in the bookmarks view are Open,
Download, Back to page, Bookmark manager,
Mark/Unmark, Navigation options, Advanced
options, Send, Find bookmark, Details, Settings,
Help, and Exit.
Note: Your device may have some bookmarks
loaded for sites not affiliated with Nokia. Nokia does
not warrant or endorse these sites. If you choose to
access them, you should take the same precautions, for
security or content, as you would with any Internet
site.
1 In the bookmarks view, select Options > Bookmark
manager > Add bookmark.
2 Start to fill in the fields. Only the URL address must be
defined. The default access point is assigned to the
bookmark if no other one is selected. Press
to
enter special characters such as /, ., :, and @. Press
to clear characters.
3 Select Options > Save to save the bookmark.
Send bookmarks
Scroll to a bookmark, and select Options > Send > Via text
message.Press
to send. It is possible to send more than
one bookmark at the same time.
Icons in the bookmark view:
Make a connection
The starting page defined for the default access point.
If you use another default access point for browsing, the
starting page is changed accordingly.
Once you have stored all the required connection settings,
you can access the pages.
1 Select a bookmark or enter the address in the field
( ). When you enter the address, matching
bookmarks are shown above the field. Press
to
select a matching bookmark.
Options when browsing (depending on the page
you are viewing) are Open, Accept, Remove file,
Open in viewer, Open Wallet, Service options,
The automatic bookmarks folder contains bookmarks
( ) that are collected automatically when you browse
pages. The bookmarks in this folder are automatically
organised according to domain.
Any bookmark showing the title or Internet address of
the bookmark.
62
Add bookmarks manually
Bookmarks, Save as bookmark, View images,
Navigation options, Advanced options, Show
images, Send bookmark, Find, Details, Settings,
Help, and Exit.
2 Press
to start to download the page.
Connection security
If the security indicator
is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Browse
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
Web
R1115_en.book Page 63 Thursday, February 10, 2005 9:20 AM
To open a link, to check boxes, and make selections, press
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you have visited during a browsing session. The history list
is cleared each time a session is closed.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Select Options > Details > Security to view details about
the connection, encryptions status, and information about
server and user authentication.
Tip! To access the bookmarks view while browsing,
press and hold down . To return to the browser view,
select Options > Back to page.
Security features may be required for some services, such
as banking services. For such connections you need
security certificates. For more information, contact your
service provider. See also ‘Certificate management’, p. 94.
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages to
the phone memory or on a memory card, and browse them
when offline. To access the pages later, press
in the
bookmarks view to open the Saved pages view.
To enter a new URL address, select Options > Navigation
options > Go to web address.
63
Web
R1115_en.book Page 64 Thursday, February 10, 2005 9:20 AM
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
You can download items such as ringing tones, images,
operator logos, themes, and video clips. Downloaded
items are handled by the respective applications in your
phone, for example, a downloaded image is saved in
Gallery.
Shortcut: Use
to jump to the end of a page
and
to the beginning of a page.
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
If you regularly browse pages containing information
which does not change very often, you can save and
browse them when offline. In the saved pages view you can
also create folders to store your saved browser pages.
Options in the saved pages view are Open, Back to
page, Reload, Saved pages, Mark/Unmark, Navigation
options, Advanced options, Details, Settings, Help,
and Exit.
To open the saved pages view, press
view. In the saved pages view, press
page ( ).
in the bookmarks
to open a saved
Important: Only install software from sources that
offer adequate protection against harmful software.
To save a page while browsing, select Options > Advanced
options > Save page.
To download and view new Web service messages while
browsing, select Options > Advanced options > Read
service msgs. (shown only if there are new messages). See
also ‘Web service messages’, p. 50.
To start a connection to the browser service and to
download the latest version of the page, select Options >
Reload. The phone stays online after you reload the page.
Tip! Your browser collects bookmarks automatically
while you are browsing Web pages. The bookmarks are
stored to the automatic bookmarks folder (
) and
automatically organised according to domain. See also
‘Web settings’, p. 65.
64
View saved pages
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can be
provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
phone, for example, a downloaded photo can be saved in
Gallery.
Important: Only install applications from sources
that offer adequate protection against harmful
software.
1 To download the item, scroll to the link, and press
If the item is provided free, select Accept. Once
downloaded, the content is automatically opened in a
suitable application.
To cancel the download, select Cancel.
Select the appropriate option to purchase the item, for
example, ’Buy’.
Carefully read all the information provided.
If the online content is compatible, you can use your
wallet information to make the purchase.
Select Open Wallet. You are prompted for your wallet
code. See ‘Create a wallet code’, p. 71.
Select the appropriate card category from your wallet.
Select Fill in. This uploads the selected wallet
information.
If the wallet does not contain all information necessary
for the purchase, you are requested to enter the
remaining details manually.
Note: Copyright protections may prevent some
images, ringtones and other content from being copied,
modified, transferred, or forwarded.
End a connection
Select Options > Advanced options > Disconnect, or
press and hold
to quit browsing and to return to the
standby mode.
Web
R1115_en.book Page 65 Thursday, February 10, 2005 9:20 AM
Empty the cache
The information or services you have accessed are stored
in the cache memory of the phone.
Note: A cache is a memory location that is used to
store data temporarily. If you have tried to access or
have accessed confidential information requiring
passwords, empty the cache after each use. The
information or services you have accessed is stored in
the cache memory of the phone. To empty the cache,
select Options > Navigation options > Clear cache.
Web settings
Select Options > Settings and from the following:
Default access point—To change the default access point,
press
to open a list of available access points. See
‘Connection settings’, p. 89.
Show images—To select if you want to load images while
browsing or not. If you select No, to load images later
during browsing, select Options > Show images.
65
Web
R1115_en.book Page 66 Thursday, February 10, 2005 9:20 AM
Font size—To choose the text size.
Java/ECMA script—To enable or disable the use of scripts.
Default encoding—If text characters are not shown
correctly, you may choose another encoding according to
language.
Security warnings—To hide or show security notifications.
Automatic bookmarks—To disable automatic bookmark
collecting, select Off. If you want to continue collecting
automatic bookmarks but hide the folder from the
bookmarks view, select Hide folder.
Screen size—To select what is shown when you are
browsing. Select Select. keys only or Full screen.
Search page—To define a Web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—To enable or disable the receiving and sending
of cookies.
Glossary: Cookies are a means of content providers
to identify users and their preferences for frequently
used content.
66
Conf. DTMF sending—Choose whether you want to
confirm before the phone sends DTMF tones during a call.
See also ‘Options during a call’, p. 23.
Wallet > On—To open the wallet automatically when a
compatible browser page is opened. See ‘Wallet’, p. 70.
R1115_en.book Page 67 Thursday, February 10, 2005 9:20 AM
Office
Office
Calculator
Converter
To add, substract, multiply, divide, calculate square roots
and percentages, press
, and select Office > Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
To save a number in the memory (indicated by M), select
Options > Memory > Save. To retrieve a number in memory,
select Options > Memory > Recall. To clear a number in
memory, select Options > Memory > Clear.
Calculate percentages
1 Enter a number for which you want to calculate a
percentage.
2 Select
, or
3 Enter the percentage.
4 Select
To convert measures such as Length from one unit (Yards)
to another (Metres), press
, and select Office >
Converter.
Options in Converter are Select unit/Change
currency, Conversion type, Currency rates, Help, and
Exit.
Note that Converter has limited accuracy, and rounding
errors may occur.
1 Scroll to the Type field, and press
to open a list of
measures. Scroll to the measure you want to use, and
select OK.
2 Scroll to the first Unit field, and press . Select the
unit from which you want to convert and OK. Scroll to
the next Unit field, and select the unit to which you
want to convert.
3 Scroll to the first Amount field, and enter the value you
want to convert. The other Amount field changes
automatically to show the converted value.
Press
to add a decimal and
for the +,
- (for temperature), and E (exponent) symbols.
67
Office
R1115_en.book Page 68 Thursday, February 10, 2005 9:20 AM
Set base currency and exchange rates
Tip! To change the conversion order, enter the value
in the second Amount field. The result is shown in the
first Amount field.
Before you can make currency conversions, you need to
choose a base currency and add exchange rates. The rate
of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
1 Select Converter > Options > Currency rates. A list of
currencies opens, and you can see the current base
currency at the top.
2 To change the base currency, scroll to the currency,
and select Options > Set as base curr.
Tip! To rename a currency, go to the currency
rates view, scroll to the currency, and select
Options > Rename currency.
3 Add exchange rates. Scroll to the currency, and enter
a new rate, that is, how many units of the currency
equal one unit of the base currency you have selected.
After you have inserted all the necessary exchange rates,
you can make currency conversions.
Note: When you change base currency, you must
enter the new rates because all previously set
exchange rates are set to zero.
68
To-do
Create a task list
Press
, and select Office > To-do to write notes and
maintain a task list.
To add a note, press any key to start to write the task in the
Subject field.
To set the due date for the task, scroll to the Due date field,
and enter a date.
To set the priority for the To-do note, scroll to the Priority
field, and press
to select the priority. The priority icons
are (High) and (Low). There is no icon for Normal.
To mark a task as completed, scroll to it in the To-do list,
and select Options > Mark as done.
To restore a task, scroll to it in the To-do list, and select
Options > Mark as not done.
Notes
Press
, and select Office > Notes to write notes. You can
send notes to other compatible devices and save plain text
files (TXT format) that you receive to Notes.
Recorder
Office
R1115_en.book Page 69 Thursday, February 10, 2005 9:20 AM
Press
, and select Office > Recorder to record telephone
conversations and voice memos. If you are recording a
telephone conversation, both parties hear a tone every 5
seconds during recording.
69
My own
R1115_en.book Page 70 Thursday, February 10, 2005 9:20 AM
My own
Go to—add shortcuts
Default shortcuts:
Opens Calendar
Opens Inbox
Opens Notes
To store shortcuts (links to your favourite images, notes,
bookmarks, and so on), press
, and select My own > Go
to. Shortcuts are added only from the individual
applications, for example, Gallery. Not all applications
have this function.
1 Select an item from an application to which you want
to add a shortcut.
2 Select Add to 'Go to'. A shortcut in Go to is
automatically updated if you move the item to which
it is pointing (for example, from one folder to another).
To change the identifier in the lower left corner of the
shortcut icon, select Options > Shortcut icon.
Delete a shortcut
Select the shortcut, and press . The default shortcuts
Notes, Calendar, and Inbox cannot be deleted.
70
When you remove an application or a document which has
a shortcut in Go to, the shortcut icon of the removed item
is dimmed in the Go to view. The shortcut can be deleted
next time you start Go to.
Wallet
Press
, and select My own > Wallet. Wallet provides
you with a storage area for your personal information,
such as credit and debit card numbers, addresses, and
other useful data (for example, user names and passwords).
The information stored in Wallet can be retrieved while
browsing to automatically fill in online forms on browser
pages (for example, when the service asks for credit card
details). Data in Wallet is encrypted and protected with a
wallet code that you define.
Wallet automatically closes after 5 minutes. Enter the
wallet code to regain access to the contents. You can
change this automatic time-out period if required. See
‘Wallet settings’, p. 72.
Options in the Wallet main view are Open, Settings,
Help, and Exit.
Create a wallet code
Each time you open Wallet, you are prompted for a wallet
code. Enter the code that you have created, and select OK.
When you open Wallet for the first time, you must create
your own wallet code:
1 Enter a code of your choice (4—10 alphanumeric
characters), and select OK.
2 You are prompted to verify the code. Enter the same
code, and select OK. Do not give your wallet code to
anyone else.
If you enter the wallet code incorrectly on three
consecutive occasions, Wallet is blocked for 5 minutes.
The block time increases if further incorrect wallet codes
are entered.
If you forget your wallet code, you must reset the code, and
you will lose all information stored in Wallet. ‘Reset the
wallet and wallet code’, p. 73.
Store personal card details
1 Select the Cards category from the main Wallet menu,
and press
2 Select a type of card from the list, and press
Payment cards—Credit and debit cards.
Loyalty cards—Membership and store cards.
Online acc. cards—Personal user names and passwords
to online services.
Address cards—Basic contact details for home or the
office.
User info cards—Customised personal preferences for
online services.
3 Select Options > New card. An empty form opens.
4 Fill in the fields, and select Done.
My own
R1115_en.book Page 71 Thursday, February 10, 2005 9:20 AM
You can also receive card information directly to the
phone from a card issuer or service provider (if they offer
this service). You will be notified which category the card
belongs to. Save or discard the card. You can view and
rename a saved card, but you cannot edit it.
You can open, edit, or delete the fields in the card. Any
changes will be saved upon exiting.
Create personal notes
Personal notes are a means of storing sensitive
information, for example, a bank account number. You can
access the data in a personal note from the browser. You
can also send the note as a message.
1 Select the Personal notes category from the main
Wallet menu, and press
2 Select Options > New note. An empty note opens.
3 Press
—
to start writing. Press
to
clear characters.
71
My own
R1115_en.book Page 72 Thursday, February 10, 2005 9:20 AM
72
4 Select Done to save.
Create a wallet profile
Once you have stored your personal details, you can
combine them into a wallet profile. You can use a wallet
profile to retrieve wallet data from different cards and
categories to the browser, for example, when you are
filling in a form.
1 Select the Wallet profiles category from the main
wallet menu, and press
2 Select Options > New profile. A new wallet profile
form opens.
3 Fill in the fields or select an option from the listed
items:
Profile name—Choose and enter a name for the profile.
Payment card—Select a card from the list.
Loyalty card—Select a card from the list.
Online access card—Select a card from the list.
Shipping address—Select an address from the list.
Billing address—By default, this is the same as the
shipping address. If you require a different address,
select one from the address card category.
User info card—Select a card from the list.
Receive e-receipt—Select a destination from the list.
Deliver e-receipt—Select To phone, To e-mail, or To
pho. & e-mail.
RFID sending—Set to On or Off. Defines whether or not
your unique phone identification is sent with the wallet
profile.
4 Select Done.
Example: By uploading your payment card details you
do not need to enter the card number and expiry date
each time you need them (depending on the content
being browsed). Also, you can retrieve your user name
and password stored as an access card when
connecting to a mobile service that requires
authentication.
View ticket details
You can receive notifications of tickets purchased online
through the browser. Received notifications are stored in
the wallet. To view the notifications:
1 Select the Tickets category from the main Wallet
menu, and press
2 Select Options > View. None of the fields within the
notification can be modified.
Wallet settings
From the main Wallet menu, select Options > Settings and
the following:
Wallet code—Change your wallet code. You are prompted
to enter the current code, create a new code, and verify the
new code.
RFID—Set the phone ID code, type, and sending options.
My own
R1115_en.book Page 73 Thursday, February 10, 2005 9:20 AM
Automatic close—Change the automatic time-out period
(1—60 minutes). After the time-out period has elapsed, the
wallet code must be re-entered to gain access to the
contents.
Reset the wallet and wallet code
This operation erases all contents of Wallet.
To reset both the contents of Wallet and the wallet code:
1 Enter *#7370925538# in the standby mode.
2 Enter the phone lock code, and select OK. See
‘Security’, p. 92.
When opening Wallet again, you must enter a new wallet
code. See ‘Create a wallet code’, p. 71.
73
IM—Instant messaging (chat)
R1115_en.book Page 74 Thursday, February 10, 2005 9:20 AM
IM—Instant messaging (chat)
Press
, and select Connect. > IM.
Instant messaging is a network service which allows you
to converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain IM servers that you can
log in to once you have registered to an IM service.
Options in the IM main view are Open, Login/
Logout, Settings, Help, and Exit.
Note: Check the availability of chat services,
pricing, and tariffs with your network operator and/or
service provider. Service providers will also give you
instructions on how to use their services.
Receive IM settings
Tip: To log in automatically when you start IM,
without having to enter your user ID and password
each time, select Options > Settings > Server
settings > IM login type > Automatic.
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message, a so-called smart message, from the network
operator or service provider that offers the IM service. See
74
‘Data and settings’, p. 49. You can also enter the settings
manually. See ‘Chat server settings’, p. 79.
Connect to an IM server
1 Open IM to have your phone connect to the IM server
in use. To change the IM server in use and save new IM
servers, see ‘Chat server settings’, 79.
2 Enter your user ID and password, and press
to log
in. You obtain the user ID and password for the IM
server from your service provider.
You can select Cancel to stay offline; to log in to the
IM server later, select Options > Login. You cannot
send or receive messages while you are offline.
3 To log out, select Options > Logout.
Modify your IM settings
Select Options > Settings > IM settings:
Use screen name (shown only if IM groups are supported
by the server)—To enter a nickname (up to10 characters),
select Yes.
IM presence—To allow others to see if you are online,
select Active for all.
Allow messages from—To allow messages from all, select
All.
Allow invitations from—To allow invitations only from your
IM contacts, select IM contacts only. IM invitations are
sent by IM contacts who want you to join their groups.
Msg. scrolling speed—To select the speed at which new
messages are displayed.
Sort IM contacts—To sort your IM contacts Alphabetically
or By online status.
Availability reloading—To choose how to update
information about whether your IM contacts are online or
offline, select Automatic or Manual.
Search for IM groups and users
To search for groups, in the IM groups view, select
Options > Search. You can search by Group name, Topic,
and Members (user ID).
To search for users, in the IM contacts view, select
Options > New IM contact > Search. You can search by
User's name, User ID, Phone number, and E-mail address.
Join and leave an IM group
To join an IM group that you have saved, scroll to the
group, and press
To join an IM group not on the list, but for which you know
the group ID, select Options > Join new group. Enter the
group ID, and press
To leave the IM group, select Options > Leave IM group.
Chat
Once you have joined an IM group, you can view the
messages that are exchanged there, and send your own
messages.
IM—Instant messaging (chat)
R1115_en.book Page 75 Thursday, February 10, 2005 9:20 AM
Options while chatting are Send, Send private
msg., Reply, Forward, Insert smiley, Send invitation,
Leave IM group, Add to banned list, Group, Record
convers./Stop recording, Help, and Exit.
To send a message, write the message in the message
editor field, and press
To send a private message to a participant, select Options
> Send private msg., select the recipient, write the
message, and press
To reply to a private message sent to you, select the
message, and select Options > Reply.
75
IM—Instant messaging (chat)
R1115_en.book Page 76 Thursday, February 10, 2005 9:20 AM
To invite IM contacts who are online to join the IM group,
select Options > Send invitation, select the contacts you
want to invite, write the invitation message, and press
Record chats
Options in the recorded chats view are Open,
Delete, Send, Mark/Unmark, Login/Logout, Settings,
Help, and Exit.
To record to a file the messages that are exchanged during
a conversation or while you are joined in a IM group,
select Options > Record convers., enter a name for the
conversation file, and press
. To stop recording, select
Options > Stop recording.
The recorded conversation files are automatically saved in
the Recorded chats.
To view the recorded chats, in the main view, select
Recorded chats, select the conversation, and press
View and start conversations
Go to the Conversations view to see a list of the
individual conversation participants that you have an
ongoing conversation with.
76
To view a conversation, scroll to a participant, and press
Options when viewing a conversation are Send, Add
to IM contacts, Insert smiley, Forward, Record
convers./Stop recording, Blocking options, End
conversation, Help, and Exit
To continue the conversation, write your message, and
press
To return to the conversations list without closing the
conversation, press Back.
To close the conversation, select Options > End
conversation. Ongoing conversations are automatically
closed when you exit IM.
To start a new conversation, select Options > New
conversation:
Select recipient—To see a list of your chat contacts that
are currently online. Scroll to the contact that you want to
start a conversation with, and press
Glossary: The user ID is provided by the service
provider to those who register to this service.
Enter user ID—To enter the user ID of the user you want to
start a conversation with, and press
To save a conversation participant to your IM contacts,
scroll to the participant, and select Options > Add to IM
contacts.
To send automatic replies to incoming messages, select
Options > Set auto reply on. Enter the text, and press
Done. You can still receive messages.
To prevent receiving messages from certain participants,
select Options > Blocking options, and select from the
following:
Options in the IM contacts view are Open
conversation, Open, Change contact list, Reload user
availab., Belongs to groups, New IM contact, Move to
other list, Edit, Delete, Switch tracking on, Blocking
options, Login/Logout, Settings, Help, and Exit.
To create a new contact, select Options > New IM
contact > Enter manually. Fill in the Nickname and User
ID fields, and select Done.
Add to blocked list—To block messages from the currently
selected participant.
To move a contact from a list on the server to the retrieved
list, select Options > New IM contact > Move from other
list.
Add ID to list manually—To enter the user ID of the
participant. Enter the ID, and press
To change the chat contact list, select Options > Change
contact list.
View blocked list—To see the participants whose
messages are being blocked.
Select from the following options:
Unblock—To select the user that you want to remove from
the blocked list. Press
IM contacts
Go to the IM contacts to retrieve chat contact lists from
the server, or to add a new chat contact to a contact list.
When you log in to the server, the previously used chat
contact list is retrieved from the server automatically.
IM—Instant messaging (chat)
R1115_en.book Page 77 Thursday, February 10, 2005 9:20 AM
Open conversation—To start a new conversation or
continue an ongoing conversation with the contact.
Switch tracking on—To have the phone notify you every
time the chat contact goes online or offline.
Belongs to groups—To see which groups the chat contact
has joined.
Reload user availab.—To update information about
whether the contact is online or offline. The online status
is shown by an indicator next to the contact name. This
option is not available if you have set the Availability
reloading to Automatic in IM settings.
77
IM—Instant messaging (chat)
R1115_en.book Page 78 Thursday, February 10, 2005 9:20 AM
Manage IM groups
Options in the IM groups view are Open, Join new
group, Create new group, Leave IM group, Group,
Search, Login/Logout, Settings, Help, and Exit.
Go to the IM groups view to see a list of the IM groups
that you have either saved or are currently joined to.
Administrate an IM group
Create a new IM group
Select IM groups > Options > Create new group. Enter the
settings for the group.
Scroll to a group, select Options > Group and one of the
following:
You can edit the settings for an IM group if you have
administrator rights to the group. The user who creates a
group is automatically given administrator rights to it.
Save—To save an unsaved group that you are currently
joined to.
Group name, Group topic, and Welcome note—To add
details that the participants see when they join the group.
View participants—To see who are currently joined to the
group.
Group size—To define the maximum number of members
allowed to join the group.
Details—To see the group ID, topic, participants,
administrators of the group (shown only if you have the
editing rights), the list of blocked participants (shown only
if you have the editing rights), and whether private
conversations are allowed in the group.
Allow search—To define if others can find the chat group
by searching.
Settings—To view and edit the chat group settings. See
‘Create a new IM group’, p 78.
Group members—See ‘Add and remove group members’, p.
79.
Editing rights—To define the chat group participants to
whom you want to give rights to invite contacts to join the
IM group and edit the group settings.
Banned list—Enter the participants that are not allowed to
join the IM group.
Allow private msgs.—To allow messaging between
selected participants only.
78
Group ID—The group ID is created automatically and
cannot be changed.
Add and remove group members
To add members to a group, select IM groups, scroll to an
IM group, and select Options > Group > Settings > Group
members > Selected only or All.
To remove a member from the IM group, scroll to the
member, and select Options > Remove. To remove all
members, select Options > Remove all.
Chat server settings
Server name—Enter the name for the chat server.
Access point in use—Select the access point you want to
use for the server.
Web address—Enter the URL address of the IM server.
User ID—Enter your user ID.
Password—Enter your login password.
IM—Instant messaging (chat)
R1115_en.book Page 79 Thursday, February 10, 2005 9:20 AM
Select Options > Settings > Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the chat
service. You obtain the user ID and password from your
service provider when you register to the service. If you do
not know your user ID or password, contact your service
provider.
To change the IM server to which you wish to connect,
select Default server.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
settings:
79
Connectivity
R1115_en.book Page 80 Thursday, February 10, 2005 9:20 AM
Connectivity
Bluetooth connection
Bluetooth technology enables wireless connections to
send images, video clips, music and sound clips, and notes,
or to connect wirelessly to compatible devices with
Bluetooth technology such as computers. Since devices
with Bluetooth technology communicate using radio
waves, your phone and the other device do not need to be
in direct line-of-sight. The two devices only need to be
within a maximum of 10 metres of each other, although
the connection can be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 1.2
supporting the following profiles: Generic Access Profile,
Serial Port Profile, Bluetooth Printing Profile, Dial-up
Networking Profile, Headset Profile, Handsfree Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, and Basic Imaging Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
80
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features that use Bluetooth technology, or allow such
features to run in the background while using other
features, increase the demand on battery power and
reduces the battery life.
Bluetooth connection settings
Press
, and select Connect. > Bluetooth.
Enter the following:
Bluetooth—Set to On or Off.
My phone's visibility > Shown to all—Your phone can be
found by other devices with Bluetooth technology or
Hidden—Your phone cannot be found by other devices.
My phone's name—Define a name for your phone. After
you have set a Bluetooth connection and changed My
phone's visibility to Shown to all, your phone and this
name can be seen by other users with devices using
Bluetooth technology.
Send data using a Bluetooth
connection
There can be only one active Bluetooth connection at a
time.
1 Open an application where the item you wish to send is
stored. For example, to send an image to another
compatible device, open Gallery.
2 Select the item, for example, an image, and select
Options > Send > Via Bluetooth.
Tip! When searching for devices, some devices
may show only the unique addresses (device
addresses). To find the unique address of your
phone, enter the code *#2820# in the standby
mode.
The phone starts to search for devices within range.
Devices with Bluetooth technology that are within
range start to appear on the display one by one. You
can see a device icon, the name of the device, the
device type, or a short name.
Tip! If you have searched for devices earlier, a list
of the devices that were found previously is shown
first. To start a new search, select More devices. If
you switch off the phone, the list is cleared.
To interrupt the search, press Stop. The device list
freezes, and you can start to form a connection to one
of the devices already found.
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter
a passcode.
Create your own passcode (1—16 digits), and agree
with the owner of the other device to use the same
code. The passcode is used only once.
Tip! To send text using a Bluetooth connection
(instead of text messages), go to Notes, write the
text, and select Options > Send > Via Bluetooth.
After pairing, the device is saved to the paired devices
view.
Glossary: Pairing means authentication. The users of the
devices with Bluetooth technology should agree what
the passcode is and use the same passcode for both
devices in order to pair them. Devices that do not have
a user interface have a factory-set passcode.
Connectivity
R1115_en.book Page 81 Thursday, February 10, 2005 9:20 AM
When the connection has been established, the note
Sending data is shown.
The Drafts folder in Messaging does not store messages
sent using a Bluetooth connection.
Icons for different devices:
Computer
Phone
Audio or video
81
Connectivity
R1115_en.book Page 82 Thursday, February 10, 2005 9:20 AM
Headset
Other
Check the status of the Bluetooth connection
• When is shown in the standby mode, a Bluetooth
connection is active.
• When
is blinking, your phone is trying to connect
to the other device.
• When
is shown continuously, the Bluetooth
connection is active.
Pair devices
Tip! To define a short name (nickname or alias), scroll
to the device, and select Options > Assign short name
in the paired devices view. This name helps you to
recognise a certain device during device search or
when a device requests a connection.
Paired devices are easier to recognise; they are indicated
by
in the device search. In the Bluetooth main view,
press
to open the paired devices view (
).
To pair with a device, select Options > New paired
device. The phone starts a device search. Select the
device. Exchange passcodes. See step 4 in ‘Send data
using a Bluetooth connection’, p. 81.
82
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, but the connection remains active.
To set a device to be authorised or unauthorised, scroll to
a device, and select from the following options:
Set as authorised—Connections between your phone and
this device can be made without your knowledge. No
separate acceptance or authorisation is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorised devices in the paired devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
Receive data using a Bluetooth
connection
When you receive data using a Bluetooth connection, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is shown, and the item is
placed in the Inbox folder in Messaging. Messages received
using a Bluetooth connection are indicated by . See
‘Inbox—receive messages’, p. 48.
Switch off Bluetooth connectivity
Your phone as a modem
To switch off Bluetooth connectivity, select Bluetooth >
Off.
You can use your phone as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using a Bluetooth connection or a data cable. Detailed
installation instructions can be found in the User Guide for
Nokia PC Suite in Modem options on the CD-ROM.
PC connections
You can use your phone with a variety of PC connectivity
and data communications applications, for example, the
MMC card reader supplied in the sales package. With
Nokia PC Suite you can, for example, synchronise contacts,
calendar, and to-do notes between your phone and a
compatible PC. For further information on how to install
Nokia PC Suite (compatible with Windows 2000 and
Windows XP), see the User Guide for Nokia PC Suite and
the Nokia PC Suite help in the ‘Install’ section on the CDROM.
CD-ROM
The CD-ROM should launch after you have inserted it into
the CD-ROM drive of a compatible PC. If not, proceed as
follows: Open Windows Explorer, right-click the CD-ROM
drive where you inserted the CD-ROM, and select
Autoplay.
Connectivity
R1115_en.book Page 83 Thursday, February 10, 2005 9:20 AM
Connection manager
You may have multiple data connections active at the
same time when you are using your phone in GSM
networks. Press
, and select Connect. > Conn. mgr. to
view the status of multiple data connections, view details
on the amount of data sent and received, and end
connections. When you open Conn. mgr., you can see the
following:
• Open data connections: data calls ( ) and packet
data connections ( )
• The status of each connection
• The amount of data uploaded and downloaded for
each connection (shown for packet data connections
only)
• The duration of each connection (shown for data calls
only)
83
Connectivity
R1115_en.book Page 84 Thursday, February 10, 2005 9:20 AM
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
Sent—The amount of data, in bytes, sent from the phone.
Duration—The length of time that the connection has been
open.
To end a connection, scroll to a connection, and select
Options > Disconnect.
Speed—The current speed of both sending and receiving
data in kilobytes per second.
To close all currently open connections, select Options >
Disconnect all.
Name—Access point name used.
Dial-up—The dial-up number used.
View data connection details
Options in Conn. mgr. main view when there are
one or more connections are Details, Disconnect,
Disconnect all, Help, and Exit.
To view the details of a connection, scroll to a connection,
and select Options > Details.
Name—The name of the Internet access point (IAP) in use,
or the modem connection name if the connection is a
dial-up connection.
Bearer—The type of data connection: Data call, High sp.
GSM, or Packet data.
84
Shared (not shown if the connection is not shared)—The
number of applications using the same connection.
Remote synchronisation
Press
, and select Connect. > Sync. Sync enables you to
synchronise your calendar and contacts with various
calendar and address book applications on a compatible
computer or on the Internet.
Status—The current status of the connection: Connecting,
Conn.(inact.), Conn.(active), On hold, Disconnctng., or
Disconnected.
The synchronisation application uses SyncML technology
for synchronisation. For information on SyncML
compatibility, contact the supplier of the calendar or
address book application you want to synchronise your
phone data with.
Received—The amount of data, in bytes, received to the
phone.
You may receive syncronisation settings in a special text
message. See ‘Data and settings’, p. 49.
Create a new synchronisation profile
Options in the Sync main view are Synchronise, New
sync profile, Edit sync profile, Delete, View log, Set as
default, Help, and Exit.
1 If no profiles have been defined, the phone asks if you
want to create a new profile. Select Yes.
To create a new profile in addition to existing ones,
select Options > New sync profile. Choose whether you
want to use the default setting values or copy the
values from an existing profile to be used as the basis
for the new profile.
2 Define the following:
Sync profile name—Write a descriptive name for the
profile.
Data bearer—Select the connection type: Web,
Bluetooth, or Data cable.
Access point—Select an access point to use for the data
connection.
Host address—Contact your service provider or system
administrator for the correct values.
Port—Contact your service provider or system
administrator for the correct values.
User name—Your user ID for the synchronisation server.
Contact your service provider or system administrator
for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow configuration—Select Yes if you want to allow
the server to start a synchronisation.
Auto-accept all reqs.—Select No if you want the phone
to ask you before a synchronisation initialised by the
server is started.
Network authentic. (shown only if Data bearer is set to
Web)—Select Yes to enter a network user name and
password. Press
to view the user name and
password fields.
3 Press
to select: Calendar, Contacts, or Notes.
• Select Yes if you want to synchronise the selected
database.
• In Remote database, select the synchronisation type:
Normal (two-way synchronisation), To server only,
or To phone only.
• Enter a correct path to the remote calendar, address
book, or notes database on the server.
4 Press Back to save the settings and return to the main
view.
Connectivity
R1115_en.book Page 85 Thursday, February 10, 2005 9:20 AM
Synchronise data
In the Sync main view, you can see the different
synchronisation profiles and the kind of data to be
synchronised.
1 Select a synchronisation profile and Options >
Synchronise. The status of the synchronisation is
shown at the bottom of the screen.
85
Connectivity
R1115_en.book Page 86 Thursday, February 10, 2005 9:20 AM
To cancel synchronisation before it finishes, press
Cancel.
2 You are notified when the synchronisation is
complete. After synchronisation is complete, select
Options > View log to open a log file showing the
synchronisation status (Complete or Incomplete) and
how many calendar or contact entries have been
added, updated, deleted, or discarded (not
synchronised) in the phone or on the server.
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the configuration
server.
Server password—Enter a password to identify your phone
to the server.
Session mode— Select Bluetooth or Web.
Device manager
Host address—Enter the URL address of the server.
Press
, and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your phone.
User name and Password—Enter your user name and
password.
To connect to a server and receive configuration settings
for your phone, select Start configuration.
Auto-accept all reqs.—If you want the phone to ask for
confirmation before accepting a configuration from the
server, select No.
To allow or deny receiving of configuration settings from
a service provider, select Enable config. or Disable config..
86
Access point—Select an access point to be used when
connecting to the server.
Port—Enter the port number of the server.
Allow configuration—To receive configuration settings
from the server, select Yes.
R1115_en.book Page 87 Thursday, February 10, 2005 9:20 AM
Settings
To change settings, press
, and select
Tools > Settings. Scroll to a setting group, and press
to open it. Scroll to a setting you want to change, and press
Phone settings
General
Phone language—Changing the language of the display
texts in your phone also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the phone restarts.
Changing the settings for Phone language or Writing
language affects every application in your phone, and the
change remains effective until you change these settings
again.
Tools
Tools
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
Dictionary—You can set the predictive text input On or Off
for all editors in the phone. The predictive text dictionary
is not available for all languages.
Welcome note or logo—The welcome note or logo is
displayed briefly each time you switch on the phone.
Select Off to disable the Welcome note or logo, Text to
write a welcome note (up to 50 letters), or Image to select
a photo or picture from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 93. After resetting, the
phone may take a longer time to power on. Documents
and files are unaffected.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 15
Left selection key—To assign a shortcut to the left
selection key (
) in the standby mode, select an
application from the list.
87
Tools
R1115_en.book Page 88 Thursday, February 10, 2005 9:20 AM
Right selection key—To assign a shortcut to the right
selection key (
) in the standby mode, select an
application from the list.
You can also assign keypad shortcuts for the different
presses of the scroll key, by selecting an application from
the list. The scroll key shortcuts are not available if the
active standby is on.
Operator logo—This setting is visible only if you have
received and saved an operator logo. You can choose if
you want the operator logo to show or not.
Display
Brightness—You can change
the brightness of the display
to lighter or darker. The
brighness of the display is
automatically adjusted
according to the
environment.
Screen saver timeout—The
screen saver is activated
when the timeout period is
over.
Light time-out—Select a timeout after which the
backlight is switched off.
88
Call settings
Send my caller ID (network service)—You can set your
phone number to be displayed to (Yes) or hidden from (No)
the person to whom you are calling, or the value may be
set by your network operator or service provider when you
make a subscription (Set by network).
Call waiting (network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select Activate to
request the network to activate call waiting, Cancel to
request the network to deactivate call waiting, or Check
status to check if the function is active or not.
Reject call with SMS—Select Yes to send a text message to
a caller informing why you could not answer the call. See
‘Answer or reject a call’, p. 22.
Message text—Write a text to be sent in a text message
when you reject a call.
Tip! To change the settings for call diverting, press
, and select Tools > Settings > Call divert. See ‘Call
diverting’, p. 95.
Automatic redial—Select On, and your phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling
press .
Summary after call—Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
Speed dialling—Select On, and the numbers assigned to
the speed dialling keys (
) can be
dialled by pressing and holding the key. See also ‘Speed dial
a phone number’, p. 21.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any key, except
, and .
Line in use (network service)—This setting is shown only if
the SIM card supports two subscriber numbers, that is, two
phone lines. Select which phone line you want to use for
making calls and sending text messages. Calls on both lines
can be answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line change (network service)—To prevent line selection,
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection settings
Tools
R1115_en.book Page 89 Thursday, February 10, 2005 9:20 AM
Data connections and access points
Your phone supports packet data connections ( ), such as
GPRS in the GSM network.
Glossary: General packet radio service (GPRS) uses
packet data technology where information is sent in
short packets of data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the kind of access point you need with your service
provider for the service you wish to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Packet data connections in GSM networks
When you use your phone in GSM networks, multiple data
connections can be active at the same time, access points
can share a data connection, and data connections remain
89
Tools
R1115_en.book Page 90 Thursday, February 10, 2005 9:20 AM
active during voice calls. To check the active data
connections, see ‘Connection manager’, p. 83.
Follow the instructions given to you by your service
provider.
The following indicators may be displayed below the
signal indicator, depending on which network you use:
Connection name—Give a descriptive name for the
connection.
GSM network, packet data is available in the network.
GSM network, packet data connection is active, data is
being transferred.
GSM network, multiple packet data connections are
active.
GSM network, packet data connection is on hold. (This
can happen during a voice call, for example.)
Receive access point settings
You may receive access point settings in a text message
from a service provider, or you may have preset access
point settings in your phone. See ‘Data and settings’, p. 49.
To create a new access point, select Tools > Settings >
Connection > Access points.
An access point may be protected ( ) by your network
operator or service provider. Protected access points
cannot be edited or deleted.
Access points
Options in the Access points list are Edit, New
access point, Delete, Help, and Exit.
90
Data bearer—Depending on what data connection you
select, only certain setting fields are available. Fill in all
fields marked with Must be defined or with a red asterisk.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
Options when editing access point settings are
Change, Advanced settings, Help, and Exit.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access point name (for packet data only)—The access
point name is needed to establish a connection to the
packet data network. You obtain the access point name
from your network operator or service provider.
Tip! See also ‘Receive MMS and e-mail settings’, p. 48,
‘E-mail’, p. 55, and ‘Access the Web’, p. 61.
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
The user name is often case-sensitive.
Prompt password—If you must enter a new password
every time you log in to a server, or if you do not want to
save your password in the phone, choose Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
The password is often case-sensitive.
Authentication—Select Normal or Secure.
Homepage—Depending on what you are setting up, write
the Web address or the address of the multimedia
messaging centre.
Select Options > Advanced settings to change the
following settings:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings.
Phone IP address—Enter the IP address of your phone.
Name servers—In Primary name server:, enter the IP address
of the primary DNS server. In Second. name server:, enter
the IP address of the secondary DNS server. Contact your
Internet service provider to obtain these addresses.
Glossary: The domain name service (DNS) is an
Internet service that translates domain names such as
www.nokia.com into IP addresses like 192.100.124.195.
Proxy port number—Enter the proxy port number.
Packet data
Tools
R1115_en.book Page 91 Thursday, February 10, 2005 9:20 AM
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the phone
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select When needed, the
phone uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select When available, the phone
periodically tries to establish a packet data connection.
Access point—The access point name is needed to use
your phone as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view, or delete
them in Configurations.
Proxy serv. address—Define the address for the proxy
server.
91
Tools
R1115_en.book Page 92 Thursday, February 10, 2005 9:20 AM
Date and time
See ‘Clock settings’, p. 16.
See also the language settings in ‘General’, p. 87.
Autolock period—You can set an autolock period, a timeout after which the phone automatically locks and can be
used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select None to turn
off the autolock period.
To unlock the phone, enter the lock code.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See ‘Glossary of PIN
and lock codes’, p. 93.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See ‘Glossary of PIN and
lock codes’, p. 93.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.
92
Note: When the phone is locked, calls in offline
profile to certain emergency numbers programmed into
your phone are still possible.
Tip! To lock the phone manually, press
commands opens. Select Lock phone.
. A list of
Lock if SIM changed—You can set the phone to ask for the
lock code when an unknown SIM card is inserted into your
phone. The phone maintains a list of SIM cards that are
recognised as the owner’s cards.
Fixed dialling—You can restrict calls and text messages
from your phone to selected phone numbers, if supported
by your SIM card. You need the PIN2 code for this function.
To view the list of fixed dialling numbers, press , and
select Tools > Settings > Security > Phone and SIM > Fixed
dialling. To add new numbers to the fixed dialling list,
select Options > New contact or Add from Contacts.
When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message centre
number and the recipient’s phone number must be
included on the fixed dialling list.
Options in the Fixed dialling view are Open, Call,
Activ. fixed dialling/Deact. fixed dialling, New contact,
Edit, Delete, Add to Contacts, Add from Contacts,
Find, Mark/Unmark, Help, and Exit.
Note: When security features that restrict calls are
in use (such as Call barring, Closed user group, and
Fixed dialling) calls still may be possible to the official
emergency numbers programmed into your phone.
Closed user group (network service)—You can specify a
group of people to whom you can call and who can call
you.
Confirm SIM services (network service)—You can set the
phone to display confirmation messages when you are
using a SIM card service.
Glossary of PIN and lock codes
Personal identification number (PIN) code—This code
protects your SIM card against unauthorised use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN
code is blocked, and you need to unblock it before you can
use the SIM card again. See the information about the PUK
code in this section.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones. The UPIN code
protects the USIM card against unauthorised use.
Tools
R1115_en.book Page 93 Thursday, February 10, 2005 9:20 AM
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in
your phone.
Lock code—This code (5 digits) can be used to lock the
phone to avoid unauthorised use. The factory setting for
the lock code is 12345. To avoid unauthorised use of your
phone, change the lock code. Keep the new code secret
and in a safe place separate from your phone.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card
is in your phone.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your phone.
Wallet code—This code is required to use the wallet
services. See ‘Wallet’, p. 70.
93
Tools
R1115_en.book Page 94 Thursday, February 10, 2005 9:20 AM
Certificate management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your phone.
Press
to see a list of personal certificates, if available.
View certificate details—check authenticity
Options in the certificate management main view
are Certificate details, Delete, Trust settings,
Mark/Unmark, Help, and Exit.
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
Glossary: Digital certificates are used to verify the
origin of the XHTML or WML pages and installed
software. However, they can only be trusted if the
origin of the certificate is known to be authentic.
You are notified on the phone display if the identity of the
server is not authentic or if you do not have the correct
security certificate in your phone.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
94
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your phone are correct.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
• Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the trust
settings’, p. 95.
• Expired certificate—The period of validity has ended
for the selected certificate.
• Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
• Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
applications that can use the selected certificate is shown.
For example:
• Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
• Internet: Yes—The certificate is able to certify servers.
• App. installation: Yes—The certificate is able to certify
the origin of a new Java application.
Select Options > Edit trust setting to change the value.
Call diverting
Call divert allows you to divert your incoming calls to your
voice mailbox or another phone number. For details,
contact your service provider.
1 Press
, and select Tools > Settings > Call divert.
2 Select the desired divert option. To divert voice calls
when your number is busy or when you reject
inncoming calls, select If busy.
3 Set the divert option on (Activate) or off (Cancel), or
check whether the option is activated (Check status).
Several divert options can be active at the same time.
When all calls are diverted,
mode.
Tools
R1115_en.book Page 95 Thursday, February 10, 2005 9:20 AM
is shown in the standby
Call barring and call diverting cannot be active at the
same time.
Call barring (network service)
Call barring allows you to restrict the calls that you make
or receive with the phone. To change the settings, you
need the barring password from your service provider.
Select the desired barring option, and set it on (Activate)
or off (Cancel), or check whether the option is active
(Check status). Call barring affects all calls, including
data calls.
Call barring and Call divert cannot be active at the same
time.
When calls are barred, calls still may be possible to certain
official emergency numbers.
95
Tools
R1115_en.book Page 96 Thursday, February 10, 2005 9:20 AM
Network
Operator selection—Select Automatic to set the phone
to search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the phone sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your phone.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the phone to indicate
when it is used in a cellular network based on
microcellular network (MCN) technology and to activate
cell info reception.
Enhancement settings
Indicators shown in the standby mode:
A headset, music stand, or Bluetooth wireless
technology device is connected.
A loopset is connected.
96
A car kit is connected.
The headset is unavailable, or a Bluetooth connection
to a headset is lost.
Select Headset, Carkit, Bluetooth handsfree, or Loopset
and the following options are available:
Default profile—To set the profile that you want activated
each time you connect a certain enhancement to your
phone. See ‘Set tones’, p. 12.
Automatic answer—To set the phone to answer an
incoming call automatically after 5 seconds. If the Ringing
type is set to Beep once or Silent, automatic answer is
disabled.
Voice commands
You can use voice commands to control your phone. You
record voice commands in the same way as voice tags. See
‘Add a voice tag’, p. 28.
Press
, and select Tools > Voice com.
Add a voice command to an application
You can have only one voice command per application.
1 Select the application to which you want to add a voice
command.
To add a new application to the list, select Options >
New application.
2 Select Options > Add voice command. See ‘Add a
voice tag’, p. 28.
Application manager
Press
, and select Tools > Manager. You can install two
types of applications and software to your phone:
• J2ME™ applications based on Java™ technology with
the extension JAD or JAR ( ). Do not download
PersonalJava™ applications to your phone, as they
cannot be installed.
Example: If you have received the installation file
as an e-mail attachment, go to your mailbox, open
the e-mail, open the attachments view, scroll to the
installation file, and press
to start installation.
• Other applications and software suitable for the
Symbian operating system (
). The installation files
have the SIS extension. Only install software
specifically designed for your Nokia 6681 device.
Installation files may be transferred to your phone from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using a Bluetooth connection. You can use
Nokia Application Installer in Nokia PC Suite to install an
application to your phone or a memory card. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a memory card (local disk).
Tools
R1115_en.book Page 97 Thursday, February 10, 2005 9:20 AM
Install applications and software
Application icons are as follows:
SIS application
Java application
Application is not fully installed.
Application is installed on the memory card.
Important: Only install applications from sources
that offer adequate protection against harmful
software.
Before installation, do the following:
To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To display the security certificate details of the
application, select Options > View certificate. See
‘Certificate management’, p. 94.
If you install a file that contains an update or repair to an
existing application, you can only restore the original
application if you have the original installation file or a
full back-up copy of the removed software package. To
97
Tools
R1115_en.book Page 98 Thursday, February 10, 2005 9:20 AM
restore the original application, remove the application,
and install the application again from the original
installation file or the backup copy.
Tip! You can also use Nokia Application Installer
available in Nokia PC Suite to install applications. See
the CD-ROM supplied with the phone.
The JAR file is required for installing Java applications. If
it is missing, the phone may ask you to download it. If
there is no access point defined for the application, you
are asked to select one. When you are downloading the
JAR file, you may need to enter a user name and password
to access the server. You obtain these from the supplier or
manufacturer of the application.
1 Open Manager, and scroll to an installation file.
Alternatively, search the phone memory or the
memory card, select the application, and press
to
start the installation.
2 Select Options > Install.
Tip! While browsing, you can download an
installation file and install it without closing the
connection.
During installation, the phone shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the phone displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
98
Options in the Manager main view are Install, App.
downloads, View details, Go to web address, View
certificate, Send, Remove, View log, Send log, Update,
Settings, Help, and Exit.
To start an installed application, scroll to it, and press
To start a network connection and to view extra
information about the application, scroll to it, and select
Options > Go to web address, if available.
To see what software packages have been installed or
removed and when, select Options > View log.
To send your installation log to a help desk so that they can
see what has been installed or removed, select Options >
Send log > Via text message, Via multimedia, Via
Bluetooth, or Via e-mail (available only if the correct
e-mail settings are in place).
Remove applications and software
Scroll to a software package, and select Options >
Remove. Press Yes to confirm.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
Note: If another software package depends on the
software package that you removed, the other software
package may stop working. Refer to the documentation
of the installed software package for details.
Application settings
Software installation—Select the kind of software you
want installed: On, Signed only, or Off.
Online certif. check—Select to check the online certificates
before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components. In
the Manager main view, scroll to an application, and select
Options > Suite settings to change settings related to
that specific application.
Press
, and select Tools > Activation keys to view the
digital rights activation keys stored in your phone.
• Valid keys ( ) are connected to one or more media
files.
• With expired keys ( ), you have no time to use the
media file, or the time period for using the file is
exceeded. To view the Expired activation keys, press
• To buy more usage time or extend the usage period for
a media file, select an activation key, and Options >
Activate content. Activation keys cannot be updated
if Web service message reception is disabled. See ‘Web
service messages’, p. 57.
• To view which keys are not in use at the moment (Not
used), press
twice. Unused activation keys have no
media files connected to them saved in the phone.
• To view detailed information such as the validity status
and ability to send the file, select an activation key,
and press
Tools
R1115_en.book Page 99 Thursday, February 10, 2005 9:20 AM
Activation keys—handle
copyright-protected files
Copyright protections may prevent some images, ringing
tones, and other content from being copied, modified,
transferred, or forwarded.
99
Troubleshooting
R1115_en.book Page 100 Thursday, February 10, 2005 9:20 AM
Troubleshooting
Q&A
Q: The note Retrieving message is shown briefly. What is
happening?
Bluetooth connectivity
A: The phone is trying to retrieve a multimedia message from
the multimedia messaging centre.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multimedia message.
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 metres and that there are no walls or other
obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your phone, you can
either end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
Multimedia messaging
Q: What should I do when the phone cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message. Delete
some data first. To view what kind of data you have and
how much memory the different data groups consume,
select File manager > Options > Memory details.
100
Q: How can I end the data connection when the phone starts
a data connection again and again?
A: To stop the phone from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging centre save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the phone still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—To reject all incoming
multimedia messages. After this change, the phone needs
to send information notes to the network, and the
multimedia messaging centre deletes multimedia
messages that are waiting to be sent to you.
Multimedia reception > Off—To ignore all incoming
multimedia messages. After this change, the phone does
not make any network connections related to multimedia
messaging.
select Connect. > Log > Options > Filter > All
communication.
Messaging
Q: How do I delete my log information?
Q: Why can’t I select a contact?
A: Select Connect. > Log > Options > Clear log or go to
Settings > Log duration > No log. These will erase the log
contents, recent calls register, and message delivery
reports permanently.
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the contact
card in Contacts.
Camera
Q: Why do images look smudgy?
A: Check to see if the camera lens protection window is clean.
Calendar
Q: Why are the week numbers missing?
A: If you have changed the calendar settings so that the week
starts on a day other than Monday, the week numbers will
not be shown.
Browser services
Q: What do I do if the following message is displayed: No valid
access point defined. Define one in Web settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all events,
PC connectivity
Troubleshooting
R1115_en.book Page 101 Thursday, February 10, 2005 9:20 AM
Q: Why do I have problems in connecting the phone to my PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the User Guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your phone dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), service provider, or network operator.
Application not responding
Q: How do I close an application that is not responding?
101
Troubleshooting
R1115_en.book Page 102 Thursday, February 10, 2005 9:20 AM
A: Open the application switching window by pressing and
holding
. Then scroll to the application, and press
to close the application.
Phone display
Q: Why do missing, discoloured, or bright dots appear on the
screen every time I turn on my phone?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Memory low
Q: What can I do if my phone memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
Messages from Inbox, Drafts, and Sent folders in
Messaging
Retrieved e-mail messages from the phone memory
Saved browser pages
Images and photos in Gallery
To delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are
deleting multiple items and one of the following notes are
shown: Not enough memory to perform operation. Delete
some data first. or Memory low. Delete some data., try
deleting items one by one (starting from the smallest
item).
Q: How can I save my data before deleting it?
102
A: Save your data using one of the following methods:
Use Nokia PC Suite to make a back up copy of all data to a
compatible computer.
Send images to your e-mail address, and then save the
images to your computer.
Send data using a Bluetooth connection to a compatible
device.
Store data on a compatible memory card.
Battery information
Charging and discharging
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, buy a new battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Always switch the device off and disconnect the charger
before removing the battery.
Battery information
R1115_en.book Page 103 Thursday, February 10, 2005 9:20 AM
Do not dispose of batteries in a fire! Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave the battery connected to a
charger. Overcharging may shorten its lifetime. If left unused,
a fully charged battery will lose its charge over time.
Temperature extremes can affect the ability of your battery to
charge.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
103
Care and maintenance
R1115_en.book Page 104 Thursday, February 10, 2005 9:20 AM
104
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery and allow the device to dry completely
before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses (such as
camera, proximity sensor, and light sensor lenses).
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
Additional safety information
Operating environment
Remember to follow any special regulations in force in any
area and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least 5/8
inch (1.5 cm) away from the body. When a carry case, belt clip,
or holder is used for body-worn operation, it should not
contain metal and should be positioned at least 5/8 inch (1.5
cm) away from your body.
In order to transmit data files or messages, this device requires
a quality connection to the network. In some cases,
transmission of data files or messages may be delayed until
such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is
completed.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician or
the manufacturer of the medical device to determine if they
are adequately shielded from external RF energy or if you have
any questions. Switch off your device in health care facilities
when any regulations posted in these areas instruct you to do
so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum
separation of 6 in. (15.3 cm) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations are
consistent with the independent research by and
recommendations of Wireless Technology Research. Persons
with pacemakers should:
• always keep the device more than 6 in. (15.3 cm) from
their pacemaker when the device is switched on;
• not carry the device in a breast pocket; and
• hold the device to the ear opposite the pacemaker to
minimise the potential for interference.
Additional safety information
R1115_en.book Page 105 Thursday, February 10, 2005 9:20 AM
If you have any reason to suspect that interference is taking
place, switch off your device immediately.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
105
Additional safety information
R1115_en.book Page 106 Thursday, February 10, 2005 9:20 AM
Vehicles
Potentially explosive environments
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer
or its representative of your vehicle or any equipment that has
been added.
Switch off your device when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place
objects, including installed or portable wireless equipment in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed and the
air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
106
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1 If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM or USIM card
is properly inserted in the device.
2 Press as many times as needed to clear the display and
ready the device for calls.
3 Enter the official emergency number for your present
location. Emergency numbers vary by location.
4 Press the key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
WARNING! In offline profile you cannot make calls,
except calls to certain emergency numbers, or use features
that require network coverage.
international guidelines (ICNIRP). These limits establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards and
guidelines include a substantial safety margin designed to
assure the safety of the public, regardless of age and health
and to account for any variations in measurements.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the international guidelines is
2.0 watts/kilogram (W/kg) averaged over ten grams of tissue.
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certified
power level in all tested frequency bands. The actual SAR level
of an operating device can be well below the maximum value
because the device is designed to only use the power required
to reach the network. That amount changes depending on a
number of factors such as how close you are to a network
base station. The highest SAR value when tested according to
international testing procedures for use at the ear is
0.79 W/kg.
THE NOKIA 6681 DEVICE MEETS GUIDELINES FOR EXPOSURE
TO RADIO WAVES
SAR values may vary depending on national reporting and
testing requirements and the network band. Use of device
accessories and enhancements may result in different SAR
values. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is a radio transmitter and receiver. It is
designed and manufactured not to exceed the limits for
exposure to radio frequency (RF) energy recommended by
USA and Canada: The SAR limit of USA (FCC) and Canada (IC)
is 1.6 W/kg averaged over one gram of tissue. This device
model has also been tested against this SAR limit. The highest
Certification information (SAR)
Additional safety information
R1115_en.book Page 107 Thursday, February 10, 2005 9:20 AM
107
Additional safety information
R1115_en.book Page 108 Thursday, February 10, 2005 9:20 AM
108
SAR value reported under this standard during product
certification for use at the ear is 0.78 W/kg and when properly
worn on the body is 0.47 W/kg. Information about this device
can be found on the FCC’s website at http://www.fcc.gov/oet/
fccid by searching the equipment authorization system using
FCC ID:LJPRM-57.
Index
R1115_en.book Page 109 Thursday, February 10, 2005 9:20 AM
Index
access points 89
settings 90
activation keys 99
alarms
alarm clock 16
calendar alarms 59
applications, Java 97
Bluetooth
connecting two devices, pairing 81
connection requests 81
connection status indicators 82
device address 81
device icons 81
factory set passcode 81
headset 96
pairing requests 81
pairing, glossary explanation 81
passcode, glossary explanation 81
109
switching off 83
bookmark, glossary explanation 62
brightness
display 88
setting in camera 31, 34
cache
clearing 65
calendar
alarm 59
stopping a calendar alarm 59
synchronising PC Suite 60
call register
See log
calls
dialled numbers 23
duration 23
international 21
received 23
settings 88
settings for call divert 95
transferring 22
camera
adjusting brightness 31, 34
adjusting contrast 31, 34
night mode 31
saving video clips 34
self-timer 32
sending images 31
sequence mode 32
video recorder settings 34
cameras 30
CD-ROM 83
certificates 94
chat
See instant messaging
clear screen
See standby mode
Clearing memory
Log information 101
clock
alarm 16
settings 16
snooze 16
codes 92
lock code
PIN code 93
PIN2 code 93
computer connections 83
conference call 21
connection settings 89
contact cards
inserting pictures 26
storing DTMF tones 23
contrast
setting in camera 31, 34
copying
contacts between the SIM card and
device memory 27
text 45
copyright protection
see activation keys
cutting text 45
data connections
details 84
ending 84
date
settings 92
digital rights management, DRM
see activation keys
DNS, domain name service, glossary
explanation 91
editing videos 37
adding effects 37
adding sound clips 37
adding transitions 37
custom video clips 37
e-mail 46
offline 52
opening 51
remote mailbox 50
retrieving from mailbox 51
settings 55
viewing attachments 51
groups 78
individual conversations 76
recording the messages 76
sending a private message 75
sending instant messages 75
user ID, glossary explanation 76
Internet access points (IAP)
See access points
IP address, glossary explanation 91
file formats
JAD file 97
JAR file 97, 98
RealPlayer 39
SIS file 97
file manager 17
fixed dialling 92
Java
See applications, Java
handsfree
see loudspeaker
headset settings 96
list 90
lock code 93
log
erasing contents 25
filtering 25
log duration 25
loopset settings 96
loudspeaker 17
activating 17
turning off 17
gallery 35
instant messaging 74
blocking 77
connecting to a server 74
Index
R1115_en.book Page 110 Thursday, February 10, 2005 9:20 AM
mailbox 50
media files
fast forward 40
110
Index
R1115_en.book Page 111 Thursday, February 10, 2005 9:20 AM
file formats 39
mute sound 40
rewind 40
memory
clearing memory 23, 24
viewing memory consumption 18
memory card 19
menu
rearranging 12
messaging
e-mail 46
multimedia message 46
text message 46
multimedia messages 46
mute sound 40
my home city 17
recording video 34
recording voice tags 28, 96
reminder
See calendar, alarm
remote mailbox 50
resolution, glossary explanation 33
ringing tones
adding a personal ringing tone 27
receiving in a text message 49
removing a personal ringing tone
27
packet data connections 83
GPRS, glossary explanation 89
settings 91
pasting text 45
PC connections
via Bluetooth or USB cable 83
PC Suite
calendar data 60
synchronisation 83
transferring images to a PC 35
transferring music files to your
111
memory card 35
viewing phone memory data 18
personalisation 14
PIN code 93
security code
See lock code
sending
contact cards, business cards 27
images 31
video clips 38
service commands 43
settings
access codes 92
access points 90
Bluetooth connection 80
calendar 59
call barring 95
call diverting 95
certificates 94
data connections 89
date and time 92
display 88
headset 96
IM settings 74, 79
language 87
lock code 93
loopset 96
original settings 87
personalising the phone 12
PIN code 93
screen saver 88
UPIN code 93
UPUK code 93
wallet 72
wallet code 93
shortcuts
camera 31
web connection 61
SIM card
copying names and numbers to
phone 27
messages 53
names and numbers 27
SIS file 97
SMS centre, short message service
centre 54
snooze
alarm clock 16
calendar alarm 59
software
transferring a file to your device 97
sound clips 35
sounds
muting a ringing tone 22
recording sounds 69
speed dialling 21
standby mode 12
synchronisation 84
text message 46
text message service centre
adding new 54
thumbnail images
in a contact card 26
time
settings 92
transferring content from another
phone 13
UPIN code 93
UPUK code 93
USB cable 83
USSD commands 43
storing card details 71
viewing ticket details 72
wallet code 71, 93
web
access points, see access points
access points, see access points
Index
R1115_en.book Page 112 Thursday, February 10, 2005 9:20 AM
video clips 35
video player
See RealPlayer
video recorder
See camera
voice dialling 28, 96
voice mailbox 21
changing the phone number 21
diverting calls to voice mailbox 95
voice messages 21
voice tags 28, 96
adding 28, 96
making calls 28
volume control 17
during a call 21
loudspeaker 17
wallet 70
entering the wallet code 71
resetting wallet code 73
settings 72
112

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2005:02:10 10:04:43Z
Modify Date                     : 2005:02:10 10:06:29Z
Page Count                      : 112
Creation Date                   : 2005:02:10 10:04:43Z
Mod Date                        : 2005:02:10 10:06:29Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : hollas
Metadata Date                   : 2005:02:10 10:06:29Z
Creator                         : hollas
Title                           : R1115_en.book

EXIF Metadata provided by EXIF.tools