Microsoft RM-59 CDMA 800 & 1900 MHz/AMPS 800 MHz phone User Manual 6155and6155i v1 EN FCC DRAFT

Microsoft Mobile Oy CDMA 800 & 1900 MHz/AMPS 800 MHz phone 6155and6155i v1 EN FCC DRAFT

UserManual.wiki >

Microsoft >

RM 59 User Manual

Manual

3FCC DRAFTNokia 6155/Nokia 6155i User Guide

4FCC DRAFTLEGAL INFORMATIONPART NO. 9242636, ISSUE NO. 1 Copyright ©2005 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 6155, Pop-Port™, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.US Patent No. 5818437 and other pending patents. T9 text input software Copyright ©1999-2005. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java™ is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 6155 products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANYTIME WITHOUT PRIOR NOTICE.EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents5FCC DRAFTContents1. Phone at a glance ............. 112. Set up your phone............. 163. Text entry .......................... 244. Messages ........................... 275. Call log .............................. 416. Contacts ............................ 457. Camera............................... 528. Gallery ............................... 569. Media................................. 5810. Settings............................ 6211. Organizer.......................... 8112. Mobile web ..................... 9113. Extras ............................... 9414. PC connectivity................ 9515. Enhancements ................. 9816. Battery information ...... 100

For your safety6FCC DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.

For your safety7FCC DRAFTWATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACK-UP COPIESRemember to make back-up copies or keep a written record of all important information.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless devices described in this guide are approved for use on the CDMA 800 and 1900, and AMPS. Contact your network operator for more information about networks. When using the features in this device, obey all laws and respect privacy and the legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.■Network servicesTo use the device you must have service from a network operator. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your network operator before you can utilize them. Your network operator may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your network operator may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your network operator for more information.

For your safety8FCC DRAFT■Shared memoryThe following device features may share memory: contacts; text messages; photos, images, and tones in gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, and tones in gallery; text messages; and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome9FCC DRAFTWelcomeCongratulations on your purchase of the Nokia 6155 mobile phone. Your phone provides many functions practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also connect to a PC, laptop, or other device using a data cable. To personalize your phone, you can set your favorite ring tones. ■Register your phoneMake sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your phone repaired.■Getting helpFind your phone labelIf you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the following information and have it available:• Electronic serial number (ESN)• Your zip code (only in the US)The ESN is found on the type label, which is located beneath the battery on the back of the phone. See "Remove the back cover," p. 17 and "Remove the battery," p. 17.Contact NokiaPlease have your product with you when contacting any of these numbers:Nokia Customer Care Center, USANokia Inc.Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Welcome10FCC DRAFTCustomer Care Center, CanadaNokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-619-4360UpdatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. An interactive tutorial for this product may be available at www.nokiahowto.com.Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit www.nokiaaccessibility.com.

Phone at a glance11FCC DRAFT1. Phone at a glance• Earpiece port (1)• Display screen (2)• Left selection key (3)• Call key (4)• Keypad (5)• Four-way scroll and center selection key (6)• Right selection key (7)• Power key and end key (8)• Charger port (9)• Pop-Port™ connector (10)• Microphone (11)■Keys and parts• Loudspeaker (1)• Voice command key (2)• Volume key (3)• Mini display (4)

Phone at a glance12FCC DRAFT• Camera lens (5)• Camera flash (6)• Headset connector (7)• Camera and Video key (8)• Infrared (9)The voice key functions are as follows:• Short press—Answer an incoming call.• Long press—Answer or make a voice call.■Standby modeDepending on your network operator and the model number of your phone, some or all of the following selection keys may appear in the standby mode.The standby mode is home base and indicates your phone is in the idle state.Signal strength (1)—A higher bar indicates a stronger network signal.Menu (2)—Press the center selection key to select this option.Go to (3)—Press the left selection key to select this option.XXXXXXXXX(4)—Press the right selection key to select this option.Battery level (5)—A higher bar indicates more power in the battery.

Phone at a glance14FCC DRAFT Infrared connectivity is activated. See"Infrared," p. 72.■Phone menusPhone features are grouped according to function and are accessed through the main menus. Each main menu contains submenus and lists from which you can select or view items and customize your phone features. To access these menus and submenus, use the scroll method or a shortcut.You can change your menu view from list to grid. Select Menu > Options > Main menu view > List or Grid.Note: Some features may not be available, depending on your network. For more information, contact your network operator.Scroll methodYou can use the four-way scroll key to scroll up, down, left, and right through the options.1. In the standby mode, select Menu, and scroll through the main menus.As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the battery level indicator is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus, providing a visual representation of your current position in the menu structure.2. When you arrive at a menu, press the center selection key to select submenus.• Select Back (the right selection key) to return to the previous menu.• Press the end key to return to the standby mode from any menu or submenu.In-phone helpMany features have brief descriptions (help text) you can view on the display. To view these descriptions, you must first activate help text as follows.In the standby mode, select Menu > Settings > Phone > Help text activation > On or Off. Scroll to a feature and wait about 14 seconds. Scroll down to view all of the description, or select Back to exit.

Phone at a glance15FCC DRAFT■Lock code security settingsYour device has a security option allowing you to lock your phone with a code. When the code is set and turned on, no outgoing calls are allowed and the menu cannot be accessed without entering the correct code first. This prevents unauthorized outgoing calls or access to any information stored on your device.The Security option is in the Settings menu. The first time you access the Security option, you must enter a lock code. The default lock code may vary depending on your wireless service provider. The preset lock code may be the last four digits of your phone number, 1234 or 0000. If none of these work, contact your wireless service provider for help.You must enter the lock code to access the following Security option:1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See "Change lock code," p. 76.■Go to functionsThe Go to menu enables you to change the function of the left selection key on your phone. With this function, you can quickly access your most frequently used functions from the Go to menu in the standby mode. Choose Go to functions1. In the standby mode, select Go to > Options > Select options.2. Scroll up or down to highlight the desired function.3. Select Mark to add a function or Unmark to remove a function.4. Select Done when you have added all desired functions.5. Select Yes to save the changes.6. In the standby mode, select Go to to display a list of the functions you selected in step 2.Organize functions1. In the standby mode, select Go to > Options > Organize.2. Scroll up or down to highlight the function you want to rearrange, and select Move > Move up, Move down, Move to top, or Move to bottom.3. Select Done > Yes to save the changes.

Set up your phone16FCC DRAFT2. Set up your phone■Antenna Your device has two antennas—the fixed antenna is active unless the extendable antenna is fully extended.In the Nokia 6155i phone, the GPS antenna is also internal and is activated when placing emergency calls or when On is selected from the Location info sharing menu (a carrier-dependent feature). See "Location info sharing," p. 66.Your device has a fixed and extendable antenna located at the top of the phone with the fold closed. Hold the phone with the antenna area pointed up and over your shoulder. Note: Do not touch the antenna unnecessarily with the device switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and battery life.

Set up your phone17FCC DRAFT■BatteryNote: Always switch off the power, and disconnect the charger and any other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached.Remove the back cover1. With the back of the phone facing you, push down on the back cover.2. Slide the back cover toward the bottom of the phone and remove.Remove the batteryAfter you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.Note: Always switch off the device, and disconnect the charger before removing the battery.UIM card slotYour phone has a UIM (CDMA SIM) card slot built into the mechanics. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot.

Set up your phone18FCC DRAFTReplace the battery1. Insert the battery, gold-colored contact end first, into the battery slot.2. Push down on the other end of the battery to snap the battery into place.Replace the back cover1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone.2. Slide the back cover toward the top of the phone until the back cover is securely in place.Charge the batteryNote: Before you use a charger with this device, check its model number. This device is intended for use when supplied with power from the AC-3 or AC-4 charger. 1. Plug the charger transformer into a standard ac outlet.2. Insert the charger output plug into the round jack at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Set up your phone19FCC DRAFTThe ACP-12, 9, 8, 7, and the LCH-12 can also be used to charge the phone, but must be used with the CA-44 adaptor included in the box. 1. Plug the charger transformer into a standard ac outlet.2. Insert the charger output plug into the CA-44 adapter jack. Insert the CA-44 plug into the jack on the bottom of the phone.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.■Turn your phone on or off1. To turn your phone on or off, press and hold the end key on the keypad for at least 4 seconds.2. Enter the lock code, if necessary, and select OK. See "Change lock code," p. 76.Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

Set up your phone20FCC DRAFT■Connect the headsetA compatible headset, such as HS-3, may be purchased with your phone or separately as an enhancement. See "Enhancement settings," p. 74.1. Plug the headset connector into the Pop-Port connector at the bottom end of your phone. appears in the standby mode.2. Position the headset on your ear.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press the call key to place a call. See "Phone at a glance," p. 11.• Press the end key to end a call.You can also plug a compatible headset into the 2.5-mm headset jack on the right side of your phone to allow hands-free operation. See "Enhancement settings," p. 74.■Make a callNote: Before making or receiving a call, fully extend the whip antenna.Keypad1. Enter the phone number (including the area code), and press the call key. (To delete a character to the left of the cursor, select Clear.)2. Press the end key to end the call, or select End call to cancel the call attempt.Contacts list1. In the standby mode, scroll down to display your contacts list and highlight your desired entry.

Set up your phone21FCC DRAFT2. Select Details to highlight your desired number; then select Call.Last dialed number1. In the standby mode, press the call key to display the last 30 numbers dialed.2. Scroll to the number (or name) you want to redial, and press the call key.Conference callingConference calling is a network service that allows you to take part in a conference call with two other participants.1. Make a call to the first participant.2. With the first participant on the line, select Options > New call.3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. Select Call. The first participant is put on hold.4. When the second participant picks up, press the call key to connect the calls.5. To end the conference call, select Options > End all calls, or press the end key.■Answer callsAn incoming call1. With the fold open, press the call key, or select Answer to answer the call.2. Press the end key to reject the call.Select Silence to mute the ringing tone, then Dismiss, or do nothing. The call is eventually diverted to voicemail.With your phone set to silent in the profiles menu, select Dismiss to divert the call to voicemail.3. With the fold closed, press the volume key to mute the ringing tone.A short press of the voice key answers an incoming call with the loudspeaker.By default, your phone answers an incoming call when you open the fold. You can change the setting to not answer the call when the fold opens.In the standby mode, select Menu > Settings > Call > Answer when fold is opened > On or Off.

Set up your phone22FCC DRAFTAdjust the earpiece volumeWhether in or out of a call, you can scroll the volume key located on the left side of your device up or down to adjust the volume of the earpiece. When you adjust the volume, a bar chart indicates the volume level.Answer a call with the keypad lockedTo answer a call with the keypad locked, press the call key with the fold open. To answer a call with the fold closed and the keypad locked, press and hold the voice key to answer with the loudspeaker. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. See "Keyguard," p. 23.When the keypad lock is on, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number, and press the call key.LoudspeakerWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can use your phone as a loudspeaker during a call.• To activate the loudspeaker while in a call with the fold open, select Loudsp..• To activate the loudspeaker when answering a call with the fold closed, press the voice key.• To deactivate the loudspeaker during a call, with the fold open, select Normal.The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected.Call optionsMany of the options you can use during a call are network services. Check with your network operator for more information.1. Select Options during a call to display the following options:Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.New call—Initiate a conference call. See "Conference calling," p. 21.

Set up your phone23FCC DRAFTSave—Save a number while in a call to your contacts list. This option is available only when entering numbers during a call.Add to contact—Add a phone number to an existing contact in your contacts list while in a call. This option is available only when entering numbers during a call.End all calls—Disconnect from all active calls.Touch tones—Enter the numbers, and select Tones to send the numbers as tones.Contacts—View the contacts menu.Menu—View the phone menu.2. Select an option to activate the option or enter its submenu.■KeyguardWith keyguard, you can lock the keypad to prevent keys from being pressed accidentally. The locked keypad unlocks when you receive a call. After the call, the lock automatically reactivates.With the keyguard on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number, and press the call key.Lock the keypadSelect Menu with the center selection key; then press * within 2 seconds.Unlock the keypadSelect Unlock with the center selection key; then press * within 2 seconds.

Text entry24FCC DRAFT3. Text entryYou can use two methods for entering text and numbers: standard mode and predictive text mode. Select Clear to backspace the cursor and delete a character. Select and hold Clear to backspace continuously and delete characters.■Standard modeStandard mode is the only way to enter text into the contacts list and to rename caller groups.Text (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.• Press 0 to enter a space, thereby accepting a completed word.• Press 1 to insert a period into your message.• Press * to display a complete list of special characters.• Press and hold # to bring up the Editor settings (Number mode, Dictionary on or Dictionary off, Writing language).Numbers (123)To switch to 123 mode from Abc mode, press and hold # at any message entry screen to bring up the Editor settings. Select Number mode, and the device returns to the message entry screen and switches the Abc icon in the upper left corner of the display to the 123 icon (or back).Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. With a character highlighted, select Insert to insert the character into your message.

Text entry25FCC DRAFT■Predictive text modeMuch faster than the standard mode method, predictive text input enables you to write messages quickly using your keypad and the built-in dictionary. In predictive text mode, your phone predicts the words as you enter them.Activate or deactivate1. At any text entry screen, select Options > Dictionary on to activate or Dictionary off to deactivate.2. If you are turning predictive text on, select the language of your choice.Text entryThe following illustration shows your text entry of the word Nokia in predictive text mode. With the English dictionary selected, press each of the following number keys once, and the screen will display Nokia by predicting the appropriate letter to use based on your keypad entry: 6 6 5 4 2 •Press 0 to enter a space, and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Prev.• If ? appears after a word, select Spell to add the word to the dictionary.•Press 1 to insert a period into your message.•Press and hold * to display special characters. Press * again to cycle through all available characters.■Change case and modePress # to switch between uppercase, lowercase, and sentence case text. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen:. Uppercase text: standard mode is on. Lowercase text: standard mode is on.

Text entry26FCC DRAFT Sentence case text: standard mode is on. This option is available only at the beginning of a sentence.Note: You can press # within 2 seconds to switch between standard mode and predictive text mode. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence.

Messages27FCC DRAFT4. MessagesIf you have subscribed to a message network service, you can send and receive messages to compatible phones also subscribed to a message service. You can also send and receive multimedia and e-mail messages if supported by your network operator. Also, you can make distribution lists that contain phone numbers and names from your contacts list. See "Text entry," p. 24.When composing text or multimedia messages, check the number of characters allowed in the top right corner of the message. Using Unicode characters takes up more space. With Unicode characters in your message, the indicator may not show the message length correctly. Before sending the message, the phone tells you if the message exceeds the maximum length allowed for one message. Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.Note: When you send a message, your device may display Message sent, indicating your device has sent the message to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your network operator.■Text messagesCompose and send1. In the standby mode, select Menu > Messages > Text messages > Create message.To quickly access Create message, scroll left in the standby mode.2. Compose and send a message using the keypad.Depending on the messaging service enabled, some or all of the following options are available while composing your message:Sending options > Mark or Unmark > Urgent, Delivery note, Callback no., or Signature. Select Sending options for a single message. See "Change sending options," p. 32.Clear text—Erase all the text from the message editor.Insert contact—Insert a name from your contacts list into your message.

Messages28FCC DRAFTInsert number—Insert a phone number or find a phone number in the contacts list.Save—Select Drafts to save the message in the drafts folder or Templates to save the message as one of your predefined templates in the templates folder.Exit editor—Exits the message editor.Use template—Insert a predefined template into your message.Insert smiley—Insert a smiley into your message.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary (only available with predictive text on).Insert symbol—Insert a special character into your message (only available with predictive text on).Writing language—Choose the language you want to use.Dictionary on or Dictionary off—Turn the predictive text on or off.Matches—View matches in the dictionary for the word you want to use (only available with predictive text on and when the same set of key strokes can produce multiple words).3. To send the message, select Send to > Send to number, Send to e-mail, Send to distrib. list (if a distribution list has been created), or Send to many. 4. Enter the recipient’s phone number or e-mail address or select Search to retrieve a number or e-mail address from your contacts list; select OK.Read messageWhen you receive a message, a notification message and are displayed.1. Select Show to read the message or Exit to dismiss the notification and read the message later from your inbox. See "View saved messages," p. 30. 2. Scroll up or down to view the whole message, if necessary.OptionsWhen reading a text message, select Options to access some or all of the following options:Delete—Discard the message.Use detail—Access the following three options:

Messages29FCC DRAFT•Number—Uses or saves the number. Select Options > Add to contact, Send message, or Call.•E-mail address—Lists the e-mail addresses included in the message (available only if the message contains an e-mail address). Select Save to save the e-mail address as a new phone book entry or Options > Add to contact or Send message. •Web address—Displays if a URL is included in the message.Save—Save the message to Archive, Templates, or a folder you have created.Forward—Forward the message to another phone number or e-mail address.Lock or Unlock—Lock or unlock the message.Save picture—Save the picture to your Templates folder for later use. You can enter a title for the picture, and select OK.Rename—Edit the title of the message.Reply to message1. In the standby mode, select Menu > Messages > Text messages > Inbox and your desired message, or when you receive a message, select Show.2. Select Reply > Empty screen, Original text, Template, or one of the predefined answers; then compose your reply using the keypad.3. After creating the reply, select Send. The sender’s phone number or e-mail is used as the default.TemplatesTemplates are short, prewritten messages you can recall and insert into new text messages when you are short on time.1. In the standby mode, select Menu > Messages > Text messages > Create message > Options > Use template.2. Select your desired template.3. Select Send to > Send to number , Send to e-mail , Send to many , or Send to distrib. list (with a distribution list created).4. Enter the recipient’s phone number or e-mail address, or select Search to retrieve a number or e-mail address from your contacts list; select Send.

Messages30FCC DRAFTA distribution list only contains phone numbers of recipients and is selected from a list of predefined groups you create.Text message foldersSave messagesYou can save drafts of messages or received messages to an existing folder or to a folder that you have created.1. Open the received message or create a new message, and select Options.2. To save a received message, select Save > Archive, Templates, or a folder you have created.3. To save the draft of a message you have created, select Save > Drafts or Templates.View saved messages1. In the standby mode, select Menu > Messages > Text messages.2. Select the folder containing the message you want to view:Inbox—Automatically stores any incoming messages.Outbox—Stores messages that have not been sentSent items—Stores messages that have been sent.Drafts—Stores messages created as drafts.Archive—Stores messages that you choose to archive, including unread ones.Templates—Stores pictures and prewritten templates. Preloaded templates can be edited and customized.My folders—Allows you to organize your messages by creating custom folders and saving some of your messages here. Select Options > Add folder, Rename folder, or Delete folder to add a custom folder or rename or delete a folder you have created.You can only delete folders created in my folders; the inbox, sent items, archive, and templates folders are protected. When deleting a folder, you are also deleting all messages in the folder.Distribution lists—Stores created distribution lists.3. When the folder opens, select the message you want to view.

Messages31FCC DRAFTDistribution listThe distribution list enables you to send messages to a group of contacts. In the standby mode, select Menu > Messages > Text messages > Distribution lists.To create a distribution list, select New list with no list created or Options > Create new list to create additional lists. To populate your list, select Add new and a contact from your contacts list.To use, rename, or modify a distribution list, highlight the distribution list; and select Options > Send message, Rename list, Clear list, or Delete list.Delete messagesIf your message memory is full and you have more messages waiting at the network, No space for new text messages appears in the standby mode. You can do the following:• Read some of the unread messages, and delete them individually.• Delete messages from some of your folders.Delete a single message1. In the standby mode, select Menu > Messages > Text messages.2. Select the folder containing the message you want to delete.3. Highlight the message you want to delete. 4. Select Options > Delete.5. Select Yes to delete the message or No to exit.Delete all messages in a folder1. In the standby mode, select Menu > Messages > Text messages > Delete messages.2. Select the messages you want to delete: All—Deletes all messages in all of the folders.All read—Deletes any messages that have been read in all of the folders.All unread—Deletes any messages that have not been read in all of the folders.3. Select and Mark the folders that have messages you want to delete:Inbox—Deletes all messages from the inbox folder.

Messages32FCC DRAFTSent items—Deletes all messages from the Sent items folder.Outbox—Deletes all messages from the outbox folder.Drafts—Deletes all messages from the drafts folder.Archive—Deletes all messages from the archive folder.User defined folders—Deletes all messages from the user defined folder.4. Select Done > Yes to empty the marked folder.Change sending optionsTo change sending options for all future text messages, in the standby mode, select Menu > Messages > Text messages > Message settings > Sending options and the setting you want to change:Priority > Normal or Urgent —Set the priority of a note.Delivery note > On or Off—Send a note to yourself confirming delivery of the message.Send callback number—Send a callback number to the recipient. Select Off or enter your desired phone number to send to the recipient as a callback number, and select OK.Signature—Select On to create a signature to send with text messages or Off to turn this feature off.To change sending options for one message, in the standby mode, select Menu > Messages > Text messages > Create message > Options > Sending options, Mark or Unmark the setting you want to change:Urgent—Set the priority of the note as urgent.Delivery note—Send a note to yourself confirming delivery of the message.Callback no.—Enter your desired phone number to send to the recipient as a callback number, and select OK.Signature—Create a signature to send with text messages.Change other settingsIn the standby mode, select Menu > Messages > Text messages > Message settings > Other settings and the setting you want to change:Message font size > Small font or Large font.Message overwriting > Sent items only, Inbox only, S. items & Inbox, or Off.

Messages33FCC DRAFTNote: When the message memory is full, your phone cannot send or receive any new messages. To free up the memory, you can select Message overwriting to make your phone automatically replace old messages in the inbox and outbox folders when new ones arrive.Save sent messages > Always save, Always prompt, or Off.Queue msgs. when digital unavailable > On, On prompt, or Off. Messages are stored in the outbox until they can be sent with digital service.■Multimedia messagesA multimedia message (MMS) can contain text, sound, a picture, and a video clip. Your device supports multimedia messages up to 300 KB. With the maximum size exceeded, the device may not be able to receive the message. Depending on your network, you may receive a message that includes an Internet address where you can go to view the multimedia message. Pictures are scaled to fit the display area of the device. Your device has a multimedia message viewer for playing messages and a multimedia folder for storing saved messages. When you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone unless protected by copyright.The appearance of a multimedia message may vary depending on the receiving device.Important: Exercise caution when opening messages. Messages may contain viruses or otherwise be harmful to your device or PC.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded. This function is only available if supported by your service provider or network operator. For availability and a subscription to the multimedia messaging service, contact your service provider or network operator.Note: Only devices that offer compatible multimedia message features can receive and display multimedia messages. Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if unsure of the sender’s trustworthiness.Multimedia messaging supports the following formats:• Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG• Sound: SP-MIDI, AAC, AMR audio, QCELP, and monophonic ringing tones• Video: clips in H.263 format with SubQCIF image size and AMR audio

Messages34FCC DRAFTIf a received message contains unsupported elements, these elements may be replaced with Object format not supported.You can receive MMS notifications at anytime; whether you can retrieve MMS depends, as shown in the following:• While in a call or an active browsing session, you cannot retrieve multimedia messages.• While in a stand-alone application such as a game or calendar instead of a browser or voice call, you can retrieve multimedia messages.MMS settingsBefore you can use the multimedia message feature, you must specify whether you want to receive message at all times or only if you are in your wireless service provider’s home system. This is a network service. Check with your service provider for more information.The default setting of the multimedia message service is on. The appearance of a multimedia message may vary depending on the receiving device.Allow or block multimedia receptionYou can choose to receive all messages, block all messages, or receive messages only when you are in the network operator’s home network. In the standby mode, select Menu > Messages > Multimedia messages > Message settings > Allow multimedia reception and one of the following:Yes—Allow all incoming messages.In home network—Allow incoming messages only if you are in the network operator’s home system. This is a network service. Check with your network operator for more information.No—Block all incoming messages.Retrieve or reject multimedia messagesThis setting is unavailable with multimedia reception blocked. In the standby mode, select Menu > Messages > Multimedia messages > Message settings > Incoming multi- media messages and one of the following options:Retrieve—Automatically retrieve all messages to your inbox.Retrieve manually—Enable choosing from a notification whether to retrieve a message waiting on the network.Reject—Reject incoming multimedia messages.

Messages35FCC DRAFTWhen you receive messages, Multimedia message received is displayed.Allow or block advertisementsThis setting is unavailable with multimedia reception blocked. In the standby mode, select Menu > Messages > Multimedia messages > Message settings > Allow advertisements > Yes or No.Other MMS settingsOther multimedia settings include saving your messages to Sent items. In the standby mode, select Menu > Messages > Multimedia messages > Message settings and one of the following:Save sent messages—Select Yes to save sent multimedia messages to the Sent items folder or No to discard.Delivery reports—Select On to be informed if the message was delivered or Off to not be informed.Scale image down—Select Yes or No to define whether to scale image down.Default slide timing—Set the default time in mm:ss format for each slide in an MMS to remain on the screen.MMS foldersTo use and arrange messages, select Messages > Multimedia messages and one of the following:Inbox—Contains received multimedia messages.Outbox—Contains multimedia messages which you have sent and are still waiting to be transmitted, or failed to be sent out.Sent items—Contains sent multimedia messages.Saved items—Contains saved multimedia messages that you can send later.Delete messages—Deletes messages in the Inbox, Outbox, Sent items, or Saved items folder.Write and send multimedia messages1. In the standby mode, select Menu > Messages > Multimedia messages > Create message. 2. Enter your message text, and select Options > Insert > Image, Sound clip, New sound clip, Video clip, Slide, Business card, or Calendar note. The list of available folders in the Gallery is displayed.

Messages36FCC DRAFTSelect Business card to display your contact lists; select Calendar note to show the calendar.3. Open the desired folder; scroll to the image, sound clip, or video clip; and select Options > Insert.The indicator in the message header shows the available memory size left for the message.Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.4. To add a new page or slide to the message, select Options > Insert > Slide. This applies only if there is no video clip in the messageEach slide can contain text, one image, and one sound clip. If the message contains several slides, to open the desired slide, select Previous slide, Next slide, or Slide list.You can also add business cards and calendar notes.5. To set the time interval between the slides, select Options >Slide timing. Enter the time interval in mm:ss format, and select OK.6. To move the text to the top or bottom of the message, select Options > Place text first or Place text last (default).7. To insert a name from contacts, select Options > More options > Insert contact and the desired name.8. To insert a number, select Options > More options > Insert number.9. Enter the number or search for it in contacts, and select OK.10. To insert a calendar note, select Options > Insert > Calendar note.11. To insert a business card, select Options > Insert > Business card.12. To delete an image, slide, video clip, or sound clip from the message, select Options > Delete > Image, Sound clip, Video clip, or Slide.13. To add a subject to the message, select Options > More options > Edit subject, enter a subject, and select OK.14. To view the message or slide presentation before sending it, select Options > Preview.15. To save the message to Saved items, select Options > Move.

Messages37FCC DRAFT16. To send the message, select Send to > Phone number, E-mail address, or Many.17. Enter the recipient’s number or e-mail address, or search for it in contacts; select OK. The message is moved to the outbox folder to be sent.It takes more time to send a multimedia message than a text message. While sending the multimedia message, your device displays the animated indicator , and you can use other functions on the device. If there is an interruption while sending the message, the device automatically tries to resend it a few times. If this fails, the message remains in the outbox folder, and you can try to manually resend it later. Check your outbox folder for unsent messages.Note: When sending messages, your device may display Multimedia message sent, indicating that the message has been sent to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your network operator.Sent messages are saved in the sent items folder if you set Save sent messages to Yes. See "Other MMS settings," p. 35. This is not an indication that the message has been received at the intended destination.Read multimedia messagesWhen a multimedia message is being received, appears animated in the display along with the percentage display indicating the receiving progress. With the message fully downloaded, appears in the display, showing the number of messages received (with the light indicator blinking near the bottom of your antenna).• To view the message immediately, select Show; to save the message to the inbox for later viewing, select Save; to discard the message, select Discard.• To view a saved message, select Menu > Messages > Multimedia messages > Saved items, and scroll to view the message.While viewing the message, select Play to view the entire MMS or Options and one of the following: View text—View only the text included in the message.Open image, Open sound clip, or Open video clip—View or listen to the corresponding file.Delete message—Delete the message you are viewing.

Messages39FCC DRAFT2. When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to setup voice mail.Listen to voice messagesAfter you set up voice mail, in the standby mode, press and hold 1; or select Menu > Messages > Voice messages > Listen to voice messages to dial the voice mailbox number. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. See "Phone numbers with dialing codes," p. 39.Voice mail services vary by network operator. The following instructions are examples of common operations. Please check with your network operator for specific instructions on using your voice mail service.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should look similar to the following:Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press #.Phone numbers with dialing codesDialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. To set up dialing codes, do the following:1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) 1-touch dialing slot, and select Assign.3. Enter your mailbox phone number, including the area code.4. Enter any dialing codes as necessary after the entered phone number.

Messages40FCC DRAFTFor example, if you pause for 5 seconds after connecting to voice mail, enter p twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.5. Enter any remaining pauses or other information that enables you to listen to your messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key in the standby mode.Insert dialing codesPress * repeatedly to cycle through dialing codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialing string.The following dialing codes are available: *—Bypasses a set of instructions.p—Pauses for 2.5 seconds before sending any numbers that follow.+—Replaced by the international access code.w—Waits for you to press the call key before sending the numbers or codes that follow.Clear voice mail iconTo clear the voice mail icon from the display, in the standby mode, select Menu > Messages > Voice messages > Clear voice message icon.■Web messagingWeb messaging is a network service. See "Network services," p. 7.If your network operator supports this feature, you can use the minibrowser to check for e-mail messages. In the standby mode, select Menu > Messages > Minibrowser messages > Connect.

Call log41FCC DRAFT5. Call logCall log stores information about your last 30 missed, received, and dialed calls respectively and adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest.Whether viewing missed, received, or dialed calls, select Options to access these menu options:Time of call—Displays the date and time of the call.Send message—Sends a message to the number.Use number—Edits the number and associates a name with the number.Save—Enters a name for the number and saves it to your contacts list.Add to contact—Adds a number to a contact and saves it to your contacts list (available only with the number not yet stored in your contacts list).Delete—Clears the number from memory.Call—Calls the number.■View missed callsThe missed calls feature does not function with your device switched off. Missed calls are calls you have never answered. To view missed calls, do the following:1. In the standby mode, select Menu > Call log > Missed calls, or with missed call notification displayed, select List.2. Scroll to a name or number, and select Options and an option to view or activate.■View received callsReceived calls are calls that have been answered.1. In the standby mode, select Menu > Call log > Received calls.2. Scroll to a name or number, and select Options and an option to view or activate.■View dialed numbersDialed calls are previous numbers you have dialed from your device.

Call log42FCC DRAFT1. In the standby mode, press the call key, or select Menu > Call log > Dialed numbers.2. Scroll to a name or number, and select Options.3. Select an option to view or activate.View call timesYou can make or receive calls to or from the same number and view up to five calls displayed with the time each call occurred. Your device clock must be set for this feature to work accurately.1. In the standby mode, select Menu > Call log > Missed calls, Received calls, or Dialed numbers.2. Highlight your desired name or number, and select Options > Time of call.3. Scroll down to view the call times from this number; select Back to return to the options list. ■Delete call logsYou can delete any missed, dialed, or received calls from your device memory.1. In the standby mode, select Menu > Call log > Delete recent calls.2. Select the call type you want to clear: All, Missed, Received, or Dialed.■Call durationContact your network operator for the actual calls and services invoice, which may vary depending on network features, rounding off for billing, taxes, and so forth. Select Menu to view the duration of your last call, all your dialed calls, all your received calls, all your calls, your life timer, or to clear your timers. After you select Clear timers, enter your lock code, and select OK. See "Change lock code," p. 76.Note: All call timers, except the life timer, are reset to zero with Clear timers selected.Note: Some timers, including the life timer, may be reset during service or software upgrades.

Call log43FCC DRAFTTo activate the call timer on the display screen, in the standby mode, select Menu > Call log > Call timers > Show call time on display >On.To activate the call timer in the standby mode while in a call, select Details > Show call time on display > On or Off.To view the duration of dialed or received calls placed while in the home network or while roaming, select Details > Home or Roaming.■Data and fax call durationData and fax calls are a network service. See "Network services," p. 7. If your network operator supports this feature, you can view the size or duration of sent or received data and fax calls.Note: The actual time invoiced for calls and services by your network operator may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call log > Data/fax calls and one of the following options:Last sent data/fax— View the size (KB) of the last sent data or fax call.Last received data/fax—View the size (KB) of the last received data or fax call.All sent data/fax—View the size (KB) of all sent data and fax calls.All received data/fax—View the size (KB) of all received data and fax calls.Duration of last data/fax call—View the duration time of the last data or fax call.Duration of all data/fax calls—View the duration time of all calls.Clear all data/fax logs > OK > Yes—Clear all data or fax logs.■Minibrowser durationMinibrowser is a network service. See "Network services," p. 7. If your network operator supports this feature, you can view the size or duration of sent or received data from the minibrowser.Note: The actual time invoiced for calls and services by your network operator may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call log > Minibrowser calls and one of the following options:Last sent browser data—View the size (KB) of the last sent browser data.

Call log44FCC DRAFTLast received browser data—View the size (KB) of the last received data.All sent browser data—View the size (KB) of all sent browser data.All received browser data—View the size (KB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser logs > OK > Yes —Clear all browser logs.

Contacts45FCC DRAFT6. ContactsThe contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries you can save may vary, depending on the length and total number of entries in the contacts list.■Add new contactsTo access the contacts list in the standby mode, press the right selection key, or select Menu > Contacts > Names if the right selection key on your device has a network operator menu. Save contact name and number1. In the standby mode, enter the phone number you want to save.2. Select Save.3. Enter the name, and select OK. Save contact number only1. In the standby mode, enter the phone number you want to save.2. Select and hold Options. Save an entry1. In the standby mode, select Menu > Contacts > Names > Options > Add new.2. Enter the name, and select OK.3. Enter the phone number, and select OK > Back.Save numbers and text itemsYou can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, or primary number, which you can always change.1. In the standby mode, scroll down to display your contacts list, and highlight the entry to which you want to add a phone number or text item.

Contacts47FCC DRAFTSet up 1-touch dialingYou can associate any entry in the contacts list with a key from 2–9. To dial those entries, press and hold the assigned key. See "1-touch dialing," p. 68 to activate or deactivate 1-touch dialing.Assign a key to 1-touch dialing1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to an (empty) 1-touch dialing slot, and select Assign.3. Enter the number (including the area code) and a name for the number, or select Search to retrieve a number from the contacts list; select OK.If 1-touch dialing is off, the device displays a prompt and asks if you want to turn 1-touch dialing on.4. Select Yes to activate 1-touch dialing.Change 1-touch dialing numbers1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing entry you want to change, and select Options > Change.3. Enter the new number and a name for the entry, or select Search to retrieve a number from the contacts list; select OK.Delete 1-touch dialing numbers1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing entry you want to delete, and select Options > Delete > Yes.■Voice tagsYou can dial up to 25 stored numbers using voice dialing.Before using voice tags, note the following:• Voice tags are not language-dependent. They depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.

Contacts48FCC DRAFT• Very short names are not accepted. Use long names and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialing in all circumstances.Assign a voice tag to an entryBefore you can use voice dialing, you must first assign a voice tag to the number.1. In the standby mode, scroll to the entry in your contacts list to which you want to assign a voice tag.2. Select Details > Options > Add voice tag > Start.3. Speak clearly into the microphone. Do not select Quit unless you want to cancel the recording. The device automatically stops recording, and saves and replays the voice tag. appears next to commands that have voice tags assigned.Dial a number1. In the standby mode, press and hold the right selection key with the fold open, or press and hold the voice key regardless of the fold being open or closed.2. When you hear several beeps and Speak now appears, release the key.3. Pronounce the voice tag clearly into the microphone.When the device finds the voice tag, Found: appears, and the device automatically dials the number. If the device does not locate a number or recognize the voice tag, No match found appears.Voice tags1. After you have associated a voice tag to a contact, select Menu > Contacts > Voice tags and your desired voice tag entry.2. Select Playback, Change, or Delete.

Contacts49FCC DRAFT■Edit contacts list entries1. In the standby mode, select Menu > Contacts > Names, and scroll to the entry you want to edit in your contacts list.2. Select Details > Options and one of the following options, which may vary depending on whether you are editing a contact listed by phone number or contact name:View—View the phone number of the contact.Add detail—Add more details to the contact: Name (only available with no name added), Number (General, Mobile, Home, Work, or Fax), E-mail address, Web address, Street address, Note, Image (only available with no image added), or Tone.Edit name, Edit number, Edit detail, or Change image—Edit an existing contact name, phone number, details, or image attached to the contact.Delete—Delete more details (Delete number, Delete detail, or Delete image) or the entire contact entry (Delete contact) of the contact.Send message—Create and send the contact a text message or multimedia message.Use number—Use or save the number (available when you select a contact listed with a contact name). Select Options to use the number.Set as default—Change the default number of the contact.Change type > General, Mobile, Home, Work, or Fax—Change the number type.Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag assigned, or select Playback, Change, or Delete with a voice tag assigned.Send bus. card—Send the contact as a business card to another device.Caller groups—Add the contact to an existing caller group.1-touch dialing—Add the contact to your 1-touch dialing list.3. Edit the option to your preference, and select OK.■Delete contacts entriesTo delete all entries in your contacts list, in the standby mode, select Menu > Contacts > Delete all contacts.

Contacts50FCC DRAFT■Access the contacts menu1. In the standby mode, select Menu > Contacts and one of the following options:Names—View the entries in your contacts list, and select Details or Options > Search, Add new, or Delete contact for your selected entry.Settings—Change the contacts list view or check the memory status of your device.Caller groups—View and edit the properties of any of the caller groups on the device.Voice tags—Listen to, modify, or delete a voice tag to a contact in the contacts list.1-touch dialing—View or modify the list of 1-touch dialing numbers.My number—View your own phone number.Delete all contacts—Delete all entries in your contacts list.2. Select an option to activate the feature or access its submenu.Search for a name1. In the standby mode, scroll down to display the contents of your contacts list.2. Press the key corresponding to the first letter of the name for which you are searching.3. Scroll to select a contact, and select Details to view the details.Configure settingsYou can select how the contacts appear in your contacts list and view the amount of memory used or available in your device. In the standby mode, select Menu > Contacts > Settings > Scrolling view to change view of name list or Memory status to view the device memory used and remaining.■Send and receive contactsYou can send and receive an entry in your contacts list using text messaging, if supported by your network operator.

Contacts51FCC DRAFTSend a business cardYou can send a business card as a text message to a compatible phone or other handheld device.1. Highlight your desired entry from your contacts list, and select Details > Options > Send bus. card > Via multimedia , Via text message or Via infrared. Primary number and All details options appear only if you have more than one number or detail saved to the contact entry.2. Enter the number for your recipient, or select Search to retrieve a number from your contacts list.3. Select OK and the business card is sent.

Camera52FCC DRAFT7. CameraYou can take photos and record video clips with the built-in 1.0 megapixel camera. The camera lens is on the front of the device. The camera produces photos in JPEG format and video clips in H.263 (SubQCIF) format. When using the features in this device, please follow local laws and respect privacy rights and additional rights of other people.After you take a picture or video, you can attach it to a multimedia message, send it with MMS, save it as a wallpaper, save it on a compatible PC using Nokia PC Suite software, and upload it to a Web address with the content image uploader. When you attach a picture to an entry in your list of contacts, the picture is displayed when the contact calls you.If there is not enough memory to take a new photo, delete old photos or other files in the Gallery.■Take a photo1. In the standby mode, press the camera key to activate the camera, or select Menu > Camera.2. Select Capture to take the photo. When taking a photo, a shutter sound is heard, the photo displays on the screen, and either a blinking icon or scrolling indicator displays as the photo is saved to the Images folder of Gallery.To change the camera mode from still image to video, or video to still image, select Options and the mode you want.3. Select Back to take another photo or Options and choose from one of the following:Video—Change from still image to video.Zoom—Zoom in closer before capturing a photo or get a closer look at the captured photo; use the scroll key to navigate around the photo.Night mode on or Night mode off—Turn night mode on or off.New image—Select to capture a new photo.Flash switched on or Flash switched off—Turn the flash on or off.

Camera53FCC DRAFTSelf-timer on—Use the self-timer to delay capturing a photo for 10 seconds, or set to Self-timer off.Img. sequence on—Take a series of six pictures in sequence, or set to -Img. sequence off.Open Gallery —Open gallery to view saved images, videos, and recordings.Settings—Select options in Image quality, Video clip quality, Video clip length ,Camera sounds, Self-timer lights, Default title, Image and video storage, or Default mode.View previous—View the previous photo.Send > Via multimedia or Via infrared—Send a photo to a compatible device or PC.Attach to contact—Attach an image to a contact in Names.Rename—Enter or edit the name of the captured photo, and select OK.Set contrast—Scroll to adjust the contrast of the captured photo.Set as wallpaper—Use a captured photo for wallpaper.Set as s. saver—Use a captured photo as a screen saver.Details—View the Name, Size, Created, Format, Resolution, or Copyright of a captured photo.Record a video clip1. In the standby mode, select Menu > Camera > Options > Video > Record. While you are recording, the recording indicator and the remaining recording time display.2. Select Pause to pause the recording, Continue to resume the recording, or Stop to stop the recording. The device saves the recording in the video clip folder in gallery.3. Select Back to record another video or select Options and one of the following:Still image—Go back to standard photo mode.Zoom—Zoom in closer before recording a video or get a closer look at the recorded video; Scroll to navigate around the photo.Mute or Unmute—Turn the sound on or off.

Camera54FCC DRAFTFlash on/Flash off—Turn the flash on or off.Open Gallery—Go to the video clip folder of the gallery menu.Settings—Select options in Image quality, Video clip quality, Video clip lengthCamera sounds, Self-timer lights, Default title, Image and video storage, or Default mode.Delete—Delete the video clip.Send—Send the video clip to another device as a multimedia message or use IR connectivity.Rename—Rename the video clip.Set contrast—Scroll to increase or decrease contrast of the selected video.Details—View details of the selected video, such as name, size, time and date created, length, file format, and copyright information.Self-timerIn the standby mode, select Menu > Camera >Options >Self-timer on to set a timer and delay capturing a photo for 10 seconds. Select Start when a beep sounds. The self-timer runs and beeps faster when the camera is about to capture the photo. After the timeout, the camera takes the photo and saves it in the images folder of the gallery menu.SettingsIn the standby mode, select Menu > Camera > Options >Settings to change the settings in the camera mode. Select one of the following options:Image quality—Define file compression when saving the image. Select High, Normal, or Basic. High uses the least file compression and provides the best image quality but takes more memory.Video clip quality—Define the quality of a video clip. Select High, Medium, or Low.Video clip length—Select Default (15 seconds) or Maximum (2.5 minutes depending on conditions). Only video clips that are default length or shorter can be sent in a multimedia message.Default title—Select Automatic to use a predefined title orMy title to key in or edit a new title.Image and video storage—Select the folder for image storage.

Camera55FCC DRAFTCamera sounds >On or Off—Set camera sounds.Self-timer lights > On or Off—Set self-timer lights.

Gallery56FCC DRAFT8. GalleryYou can save pictures, video clips, recordings, and ringing tones to folders in the Gallery and add new folders as well. You can download images and tones using MMS, SMS, via infrared, mobile Internet sites, or Nokia PC Suite.Note: Only compatible devices offering compatible multimedia message features can receive and display multimedia messages.Your device supports a digital rights management system to protect content you have acquired. Content such as a ringing tone, can be protected and associated with certain usage rules, for example, the number of usage times or a certain usage period. Usage rules are defined in the content activation key that can be delivered with the content or delivered separately, depending on your network operator. You may be able to update the activation key. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protection may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.Your device has about 14 MB of memory for storing files in the Gallery. This memory is not shared with other functions, such as contacts. If the device displays a message that the memory is full, delete some existing files before proceeding. ■Folders1. In the standby mode, select Menu > Gallery > Images, Video clips, Graphics, Tones, Recordings, Themes, or a user-created folder.2. Select Open to view a list of the files in the folder or Options to access the following:Delete folder —Delete a folder you have created. You cannot delete a preset folder.Move—Move the selected folder into another folder. After selecting Move, scroll to another folder, and select Move to. You cannot move a preset folder.Rename folder—Rename a folder you have created. You cannot rename a preset folder.Details—Show the name, size, and date of creation of the selected folder.

Gallery57FCC DRAFTType of view > List with details, List, or Grid—Determine how to display the folders and files within them.Sort—Sort the contents of the selected folder by name, date, format, or size.Add folder—Create a new folder.Memory status—Check the available memory for the device handset.Activation key list—View the list of available activation keys. You can delete activation keys if desired.

Media58FCC DRAFT9. Media■Media playerWith the media player you can download, view, and play compatible images, audio and video files, and animated images from a variety of sources. The media player enables you to play streaming videos and streaming audio from a network server. Streaming functionality is a network service and requires network support. Check the availability of these services, pricing, and tariffs with your network operator or the service provider whose service you want to use. network operators will also give you instructions on how to use their services.In the standby mode, select Menu > Media > Media player > Online media or Open Gallery.Online media—Connect to the operator’s network. This is a network service. Check with your network operator for pricing and information.Open Gallery—Open the Gallery. From Gallery, you can play stored audio and video files. See "Gallery," p. 56.■RadioYour phone has an FM radio that also functions as an alarm clock radio. To listen to the FM radio on your phone, connect a compatible music stand, a 2.5 mm headset, or stereo headset to the connector on the bottom of the phone. The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly.The quality of a radio broadcast depends on coverage of the radio station in that particular area.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Turn the radio on and off1. Connect the phone to a compatible headset or music stand.2. In the standby mode, select Menu > Media > Radio. The channel location number, the name of the radio channel (if you have saved the channel), and the frequency of the radio channel are displayed.

Media59FCC DRAFTTo use the graphical keys , , , or on the display, scroll left or right to the desired key, and select it.3. If you have already saved radio channels, select or to scroll to the channel you would like to listen to.To select a radio channel location, briefly press the corresponding number keys.4. To turn off the radio, select Options > Turn off. A long press on of the end key also turns the radio off.OptionsWith the radio on, select Options and one of the following:Turn off—Turn off the radio.Save channel—Save the current station to one of 20 locations (only available with a new station entered).Channels—Scroll up or down to select a channel from 20 locations. WIth an existing channel highlighted, select Options > Delete channel or Rename to delete or rename the saved channel.Mono output or Stereo output—Listen to the radio in monaural mode (default) or in stereo. Stereo output is available through a stereo enhancement.Loudspeaker or Headset—Listen to the radio through the speakerphone or through the headset.Set frequency—Manually enter the frequency of a known radio station.To set the radio frequency, press * and use the keypad to enter the frequency of a known radio station.To adjust the radio volume, press the volume up and down keys.When an application using a browser connection is sending or receiving data, it may interfere with the radio.When you place or receive a call, the radio automatically mutes. When the call ends, the radio switches back on.Tune and save a radio channelYou can save a preset station to any one of 20 locations in memory.1. When the radio is on, select or to change the radio frequency in 0.1 MHz steps, or select and hold or to start the channel search. Searching stops when a channel is found.

Media60FCC DRAFT2. To save the channel, select Options > Save channel.To save the channel to a memory location 1 to 9, press and hold the corresponding number key while the radio is playing. To save the channel in the memory location from 10 to 20, press briefly 1 or 2 and the desired number key 0 to 9.3. Enter a name for the channel, and select OK. 4. Select an (empty) location to save the channel.■RecorderThis feature enables you to record pieces of speech or sound with your device and listen to them later. The total available time is 3 minutes with no memos stored. The maximum length of a recording depends on how much memory remains available. In the standby mode, select Menu > Media > Recorder > Record to start the recording or Recordings list to manage the folder you have defined for recording storage.Record speech or sound1. In the standby mode, select Menu > Media > Recorder > Record.2. After you hear the recorder start tone, begin recording speech or sound.3. When you finish recording, select Stop, and your recording is saved to the Recordings folder in the Gallery.OptionsAfter you have saved the recording to the Recordings folder, highlight the recording, and select Open to listen to the recording using the earpiece; or select Options and one of the following.Delete—Erase the recording.Rename—Change the name of the recording.Set as ring tone—Use your recording as a ringtone (a carrier-dependent feature).Details—Show the name, size, and date of creation of the recording.Type of view > List with details, List, or Grid—Determine how to display the recording.Sort—Sort the contents of the recording by name, date, format, or size.

Media61FCC DRAFT■Media equalizerThe equalizer enhances the sound quality when using the music player by amplifying or attenuating frequency bands. You can access five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.Activate an equalizer setIn the standby mode, select Menu > Media > Equalizer, scroll to the desired setting, and select Activate.Create a custom equalizer set1. In the standby mode, select Menu > Media > Equalizer.2. Scroll to Set 1 or Set 2, and select Options > Edit.The selected set appears in the display with the bar on the far left highlighted. The bars adjust frequencies, from the lowest (the leftmost bar) to the highest (the rightmost bar). The higher the indicator on a particular bar, the more that frequency is amplified.3. To adjust the lowest frequency, scroll up and down on the bar.4. To adjust other frequencies, scroll left or right to the other bars.5. Repeat steps 3 and 4 to adjust the setting for each frequency; then select Save.6. To rename the setting, select Options > Rename, enter a new name, and select OK.7. To activate the setting, select Activate.

Settings63FCC DRAFT■ThemesA theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone. Themes automatically loads wallpapers, screen savers, ringing tones and background colors. Selecting a theme changes your previous settings. Individual settings for a theme can be changed in the settings menu. For example, the color scheme can be modified in the main display menu in settings, without changing the wallpaper, screen saver or ringing tone loaded by a theme.1. To choose the theme of your display, in the standby mode, select Menu > Settings > Themes > Select theme > Themes.2. Scroll to a theme, and select Open > Options > Apply theme.■Main display settingsWallpaperYou can set your device to display a background picture (wallpaper). 1. In the standby mode, select Menu > Settings > Main display > Wallpaper > Select wallpaper > Images, Video clips, Graphics, Tones, Recordings, Themes, or a user-created folder > Open.2. Browse your selected folder containing the graphics or image of your desired wallpaper.3. When you arrive at the image of your choice, select Options > Set as wallpaper.4. To select a set of images to rotate as wallpaper slides, select Select slide set > Images.5. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Main display > Wallpaper > On or Off.Screen saverIn the standby mode, select Menu > Settings > Main display > Screen saver > Screen saver activated, Screen saver deactivated, Screen savers (Image, Slide set, or Video clip), or Time-out.

Settings66FCC DRAFT■Time and date settingsClockIn the standby mode, select Menu > Settings > Time and date > Clock > Show clock or Hide clock, Set the time, Time zone or Time format.DateIn the standby mode, select Menu > Settings > Time and date > Date > Show date or Hide date, Set the date, Date format, or Date separator.Date and time auto-updateAuto-update is a network service. See "Network services," p. 7. If your network operator supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, for instance when you have traveled to another network or time zone.In the standby mode, select Menu > Settings > Time and date > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you reenter your digital network.If your battery has been removed or has discharged outside the digital network, you may be prompted to enter the time manually (when the battery is replaced or recharged, and you are still outside of the digital network).■Call settingsLocation info sharingLocation info sharing is only available for the Nokia 6155i device. Location info sharing is a network service. See "Network services," p. 7.If your wireless service provider supports this feature, then location info sharing allows the device to share position information over the network. For calls to emergency numbers, this position information may be used by the emergency operator to determine the position of the device. The functionality and accuracy of this feature are dependent on the network, satellite systems, and the agency

Settings68FCC DRAFT1-touch dialingYou can activate or deactivate 1-touch dialing. In the standby mode, select Menu > Settings > Call > 1-touch dialing > On or Off. See "Set up 1-touch dialing," p. 47.Open fold to answerBy default, your phone answers an incoming call when you open the fold. You can change the default setting to have your phone not answer calls with the fold open. In the standby mode, select Menu > Settings > Call > Answer when fold is opened > On or Off.Calling cardIf you use a calling card for long distance calls, you can save the calling card numbers in your device. Your device can store up to four calling cards. Contact your calling card company for more information.Save information1. In the standby mode, select Menu > Settings > Call > Calling card.2. Enter your lock code, and select OK. See "Change lock code," p. 76.3. Scroll to one of the four card memory locations, and select Options > Edit > Dialing sequence and one of the following sequence types:Access no.+ phone no.+ card no.—Dial the access number, the phone number, then the card number (and the PIN, if required).Access no.+ card no.+ phone no.—Dial the access number, the card number (and the PIN, if required), then the phone number.Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then the card number (and the PIN, if required).4. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.5. Select Card name, enter the card name, and select OK. Make callsAfter you have saved your calling card information in your device, you can make a call using your calling card.

Settings69FCC DRAFT1. In the standby mode, select Menu > Settings > Call > Calling card. 2. Enter your lock code, and select OK. See "Change lock code," p. 76.3. Select your desired calling card.4. Press the end key to return to the standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.Data or fax callsData and fax calling is a network service. See "Network services," p. 7. If your network operator supports this feature, you can set up the device to send or receive data and fax calls with a terminal, such as a PDA or PC, connected.For better performance during data calls, place the device on a stationary surface. Do not move the device or hold it in your hand during a data call.For more information on connectivity, refer to the PC/PDA Connectivity Guide which can be downloaded from the Nokia website at http://www.nokia.com/us.1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Incoming data/fax call and one of the following options:Normal—The device receives incoming calls as usual.Data calls only—The device receives only data calls.Fax calls only—The device receives only fax calls.2. When finished with receiving the fax or data call, repeat steps 1 and 2, and select Normal.Data transferYou can view the transmission speed when sending or receiving data and fax calls. In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate display > Graphic or Off.Call summaryYour device can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call > Call summary > On or Off.

Settings70FCC DRAFTRinging tone for no caller IDYou can select a different ringing tone for calls received with no caller ID. In the standby mode, select Menu > Settings > Call > Ringing tone for no caller ID > On or Off.Automatic service updateYour device is capable of receiving updates to wireless services sent to your device by your network operator. In the standby mode, select Menu > Settings > Call > Automatic update of service > On or Off.Abbreviated dialingAbbreviated dialing creates 4-5 digit numbers for your contacts. In the standby mode, select Menu > Settings > Call > Abbreviated dialing > On or Off.International prefixYou can store an international dialing prefix into your device. In the standby mode, select Menu > Settings > Call > International prefix. In the standby mode, when you enter + (press * twice) at the beginning of a phone number, your device automatically inserts the international dialing prefix that you have stored after you press the call key. See "Insert dialing codes," p. 40.Video ringing toneSelect video ringing tone to replace the default audio ringing tone with the selected video. To select video ringing tone, in the standby mode, select Menu > Settings > Call > Video ringing tone > On or Off. A video ringing tone can only be set as a default ringing tone. It is recommended to turn off the option Answer when fold is opened while using a video ringing tone.■Phone settingsPhone languageThe phone language affects the time and date formats of the clock, alarm clock, and calendar. In the standby mode, select Menu > Settings > Phone > Phone language and the language of your choice.

Settings71FCC DRAFTMemory statusYou can view the size of memory available on your device. In the standby mode, select Menu > Settings > Phone > Memory status.You can view the size of memory available for application installations. In the standby mode, select Menu > Extras > Memory.Automatic keyguardYou can set the keypad of your device to lock automatically after a preset time delay.1. In the standby mode, select Menu > Settings > Phone > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed.3. Enter the delay time (in mm:ss format), and select OK.When keyguard is on, it may be possible to dial the emergency number programmed into your device. Touch tonesTouch tones, or DTMF tones, are the tones that sound when you press the keys on your device keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. Touch tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device.Set typeIn the standby mode, select Menu > Settings > Phone > Touch tones > Manual touch tones and one of the following options:Continuous—Set the tone sound for as long as you press and hold a key.Fixed—Send tones of the duration you specify in the Touch tone length option.Off—Turn off tones. No tones are sent when you press a key.Set length You can specify touch-tone length for the Fixed option. In the standby mode, select Menu > Settings > Phone > Touch tones > Touch tone length > Short (0.1 seconds) or Long (0.5 seconds).

Settings72FCC DRAFTStart-up toneYou can select to have a start-up tone when you first turn on your device. In the standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.Help text activationYour device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 14 seconds, and wait for the help text to be displayed. If necessary, use the scroll key to page through the full help text.The default setting for help text is On. However, you can turn help text on or off. In the standby mode, select Menu > Settings > Phone > Help text activation > On or Off.■ConnectivityInfraredYou can set up the phone to receive data through its IR port. To use an IR connection, transmission and reception must be to or from an IR compatible phone or device. You can send or receive data such as business cards, graphics, images, sound clips, music files, videos, and calendar notes to or from a compatible phone or data device (such as a computer) using the IR port of your phone.Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.Send and receive data1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.The preferable distance between the two devices in an IR connection is from 3 inches to 3 feet.2. To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.3. The user of the other device must activate IR as well.If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be restarted.

Settings73FCC DRAFTConnection indicator• When is shown continuously, the IR connection is activated and your phone is ready to send or receive data using its IR port.• When blinks, your phone is trying to connect to the other device or a connection has been lost.■Voice commands and voice tagsBefore using voice tags, note the following:• Voice tags are not language-dependent, but depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.• Very short names are not accepted. Use long names, and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialing in all circumstances.Hands-free operationYou can set as many as 16 voice commands to enable hands-free operation of certain features in your device. Assign a voice tag to a commandBefore using voice commands, you must first add a voice tag to the device function. 1. In the standby mode, select Menu > Settings > Voice commands.2. Select the device function you want to tag: Profiles, Voice mailbox, Radio, Voice recorder or Call log.3. If necessary, select an option associated with that function.4. Select Add, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.The device replays and saves the recorded tag. appears next to commands with voice tags assigned.

Settings76FCC DRAFTWith Lock now selected, you must enter your lock code before the device can function normally. With the lock code accepted, your device functions normally.Call not allowed is displayed if you attempt to place a call with your device locked. To answer a call with phone lock on, select Answer, or press the call key.Allow numbersWith phone lock on, the only outgoing calls you can make are to the emergency number programmed into your device (for example, 911) or the number stored in the Allowed no. when phone locked location:1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See "Change lock code," p. 76.3. Select Allowed no. when phone locked. With an empty folder selected, select Assign, and enter the phone number; or select Assign > Search to recall the number from your contacts list. Select OK.To call the allowed phone number, in the standby mode, scroll down to highlight the number you want to call, or enter it on the keypad; press the call key to place the call.Change lock codeThe preset lock code, by default, is the last four digits of your phone number. Depending on your wireless service provider, the preset lock code can be a four digit number such as 1234 or 0000. If none of these work, contact your wireless service provider for help.To ensure the security of your device, you may want to change the preset lock code to your own selected four digit number. Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.If you enter an incorrect lock code five times in a row, your device may ask you for the security code. By default, the security code is 12345, a five digit number.Note: With the wrong lock code entered five times in succession, your phone will not accept your correct lock code for 5 minutes, even if you power off the device between incorrect entries.1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK.3. Select Change lock code.

Settings77FCC DRAFT4. Enter the new lock code (must be 4 characters in length).5. Reenter the new lock code for verification, and select OK.When changing your lock code, make sure you store it in a safe place, away from your device. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.Call restrictionsSelect call restrictions to block or allow numbers for incoming and outgoing calls. With any numbers entered as allowed numbers, all those entered as blocked numbers are ignored. With a number blocked, the phone blocks any call from it, and send the caller to the voice mail.1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See "Change lock code," p. 76.3. Select Call restrictions. 4. Select the types of calls you want to restrict:Restrict outgoing calls—Set restrictions on making calls.Restrict incoming calls—Set restrictions on receiving calls.5. Select whether to block or allow numbers:Blocked numbers—Set the numbers the phone can only block, allowing all the rest.Allowed numbers—Set the numbers the phone can only call or receive, blocking all the rest. 6. Select one of these options: Select, Add restriction (unavailable with memory full), Edit (unavailable with no number added), or Delete (unavailable with no number added).Note: With restricted calls, you may still call the official emergency number programmed into your device.Voice privacyVoice privacy is a network service. See "Network services," p. 7. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network.

Settings78FCC DRAFT1. In the standby mode, select Menu > Settings > Security.2. Enter the lock code, and select OK. See "Change lock code," p. 76.3. Select Voice privacy > On or Off.■Application settings1. In the standby mode, select Menu > Settings > Application settings.2. Scroll to one of the following submenus to activate options for preset or downloaded games or applications.Application sounds > On or OffApplication lights > App. defined or DefaultApplication vibration > On or Off■NetworkThe menu options you see in your device depend on your network operator’s network. The network determines which options actually appear in the device menu. Check with your network operator for more information.The Network menu enables you to customize the way your device chooses a network in which to operate while you are within or outside of your primary or home system. Your device is set to search for the most cost-effective network. If your device cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu.Roaming optionsYou can set your device to roam or search for another network when you are not in your home area.1. In the standby mode, select Menu > Settings > Network > Roaming options and one of the following options:Home only—You can make and receive calls in your home area only.Automatic—The device automatically searches for service in another digital network. With no service found, the device uses analog service. The roaming rate applies when not in the home service area.2. Select OK, if necessary, to confirm the activation.

Settings79FCC DRAFTModeYou can choose whether your device uses digital or analog service. In the standby mode, select Menu > Settings > Network > Mode and one of the following service options:Digital preferred—The device works in digital mode but will also work in analog mode with digital mode unavailable.Digital only—The device only works in digital mode.Analog only—The device only works in analog mode.■Network servicesThe following features are network services. See "Network services," p. 7.Store a feature code1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your network operator (for example, *633), and select OK. 3. Select the type of service that matches the feature code you entered (for example, Call forwarding).The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to the standby mode. When you enter a network feature code successfully, the feature becomes visible in the Network services menu. Call forwardingCall forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks, so contact your network operator for availability.ActivateThe following options may not all appear in the display. Contact your network operator for more information.

Settings80FCC DRAFT1. In the standby mode, select Menu > Settings > Network services > Call forwarding > Forward all calls, Forward if busy, Forward if not answered, or Forward if out of reach > Activate.2. Enter the number to which your calls, data, or other information will be forwarded, and select OK.CancelIn the standby mode, select Menu > Settings > Network services > Call forwarding > Cancel all call forwarding. Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your network operator for specific details.Call waitingIf your network operator supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.1. In the standby mode, select Menu > Settings > Network services > Call waiting > Activate or Cancel.2. During a call, select Answer, or press the call key or voice key to answer the waiting call. The first call is put on hold.3. Press the end key to end the active call.Send caller IDIf your network operator supports this feature, you can allow or prevent your number from appearing on the receiving caller ID. In the standby mode, select Menu > Settings > Network services > Send my caller ID > Yes or No.View your phone numberIn the standby mode, select Menu > Settings > Network services > My number selection.■Restore factory settingsYou can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected).

Settings81FCC DRAFT1. In the standby mode, select Menu > Settings > Restore settings.2. Enter the lock code, and select OK. See "Change lock code," p. 76.Note: Depending on your wireless service provider, your device may sometimes ask you for the security code (defaulted to 12345) instead of the lock code.

Organizer82FCC DRAFT11. OrganizerYour device contains features to help organize your everyday life, including an alarm clock, calendar, notes, to-do list, calculator, countdown timer, and stopwatch.■Alarm clockIf the alarm time arrives with the device switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.Set or change alarm settingThe alarm clock depends on the device clock, which sounds an alert anytime you specify and even works with the device turned off.1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > On.2. Enter the time for the alarm in hh:mm format. 3. Select am or pm (with 12-hour format selected), and select OK. Alarm on appears briefly in the display, and appears in the standby mode.Repeat alarmYou can set the alarm to repeat. In the standby mode, select Menu > Organizer > Alarm clock > Repeat alarm. Set the alarm toneYou can set which tone to play when the alarm sounds. In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone > Standard, Radio, or Open Gallery to choose the tone you want to use.If you set your alarm to Radio, use an accessory that supports FM stereo.

Organizer84FCC DRAFTNote a specific dateYou can apply five types of notes to your calendar. Your device asks for further information depending on which note you choose. You also have the option to set an alarm for any note you select.1. Enter the date for which you want to set a reminder. See "Go to a date," p. 83.2. From the monthly view (with the go-to date highlighted), select Options > Make a note and one of the following note types:Meeting—Enter a subject, location, and a start and end date and time.Call—Enter a phone number, a name, and the date and time.Birthday—Enter the person’s name, date and year of birth.Memo—Enter a subject and a start and end date.Reminder—Enter the subject and date of your reminder.You are given the option to set an alarm.3. Enter your note, and select Save.View notes (day view)After you have created calendar notes, you can view them.1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date containing the note that appears in bold type, and select View.Options while viewing a list of notes1. Select Options while viewing a day’s note to display the following:The options listed below are available while viewing the header of a note. Make a note—Create a new note for the selected date.Delete—Delete the note.Edit—Edit the note.Move—Move the note to another date on your calendar.Repeat—Set the note (except for birthday note) to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly).Go to date—Jump to another date on your calendar.

Organizer85FCC DRAFTGo to today—Jump to the current date on your calendar.Send note—Send the note to another device as a text message or in calendar-to-calendar format by way of multimedia messages or SMS.Copy—Copy the note for you to paste to another date.Settings—Set the date and time, date and time format, the day each week starts and whether you want your notes to autodelete after a specified time.Go to to-do list—Jump to the to-do list on your calendar.2. Select an option to activate it or enter its submenu.Send a note1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date that appears in bold type, containing the note you want to send, and select View.3. Scroll to the note you want to send, and select Options > Send note > Send as message (Text message or Multimedia msg.), Via calendar, or Via infrared.4. If you select Via calendar, enter the number for the recipient, or select Search to retrieve a number from the contacts list; select OK. 5. If you select Send as message (Text message or Multimedia msg.), the note appears as a text message in the display. • Select Send to > Send to number, Send to e-mail, Send to many, or Send to distrib. list.• Enter the number for the recipient, or select Search to retrieve a number from the contacts list; select Send.Receive calendar notesWhen you receive a calendar note in calendar-to-calendar format, your device displays Calendar note received.• To view calendar notes, select Show, and if necessary, scroll to view the entire message. • To save calendar notes after viewing, select Options > Save.• To discard calendar notes after viewing, select Exit or Options > Discard.

Organizer86FCC DRAFTWhen you receive a calendar note or text message, a message notification appears in the standby mode. You can save the note in your calendar and set an alarm for any date and time.■NotesYou can write and save information in Notes and send notes using multimedia or text message. In the standby mode, select Menu > Organizer > Notes. With no notes created, select Add note, create your note, and select Save when done. With notes already created, highlight the note you want to use, and select View to read or Options > Make a note, Delete, Edit, Send note (Send as message or Via multimedia), or Delete all notes.■To-do listUse the to-do list feature to keep track of your tasks. You can save a note for a task, select a priority level for the note and mark it as done when you have completed it. You can sort the notes by priority or by date. Add a to-do note1. In the standby mode, select Menu > Organizer > To-do list.2. If there are no notes, select Add note.3. Enter the subject of the to-do note, and select Save.4. Select High, Medium, or Low priority.5. Enter the due date and time to set the alarm.View a to-do note1. In the standby mode, select Menu > Organizer > To-do list.2. Highlight a to-do note, and select Options and one of the following:Add—Add another note.Delete—Delete the note.Mark note as done or Mark as not done—Mark a note or task as completed or not; if completed, no more reminders will follow.Sort by deadline—Sort the notes according to their deadline.

Organizer87FCC DRAFTSend—Send the note to another device, as a text or multimedia message, or as a calendar note to another compatible device.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do note to a date on your calendar.Delete done notes—Delete all the completed to-do notes.Delete all notes—Delete all the to-do notes in the list.3. View the to-do note, and select Edit to edit the note or Options to select from the following:Deadline—Set a deadline for the note, listing any uncompleted notes if existing.Mark note as done or Mark as not done—Mark a note or task as completed or not; if completed, no more reminders will follow.Delete—Delete the note.Edit priority—Change the priority to high, medium, or low.Send—Send the note to another device, as a text or multimedia message, or as a calendar note to another compatible device.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do note to a date on your calendar.■CalculatorThe calculator in your device adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.Note: This calculator, designed for simple calculations, has limited accuracy.1. In the standby mode, select Menu > Organizer > Calculator.2. Enter the first number in the calculation. Press # for a decimal point if necessary.To change the sign, select Options > Change sign, or scroll up or down.To perform a square or square root calculation, select Options > Square or Square root.

Organizer88FCC DRAFTTo cycle through the add (+), subtract (-), multiply (*), and divide (/) characters, press *.3. Enter the second number in your calculation.4. Select Equals to complete calculation or Options if more functions are required. Currency converterYou can convert foreign currency to domestic, or vice versa, directly in the standby mode or from the Calculator menu.Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero.1. In the standby mode, select Menu > Organizer > Calculator > Options > Exchange rate > Foreign units in home units or Home units in foreign units.Foreign units in home units—The number of home units cost to make one unit of foreign currency.Home units in foreign units—The number of foreign units cost to make one unit of your home currency.2. Enter the exchange rate (press # to insert a decimal), and select OK.3. In the standby mode, enter the currency amount to be converted.4. Select Options > To home or To foreign.To home—converts foreign currency to domestic currency.To foreign—converts domestic currency to foreign currency.5. If you do not enter an exchange rate, the device will prompt you to do so. Select OK. You can edit the exchange rate at anytime.■Countdown timerThe countdown timer in your device enables you to enter a specific time (up to 99 hours and 59 minutes). When the time runs out, your device sounds an alarm.Note: The countdown timer only works when the device is on. When you turn off your device, the timer is no longer active.

$Organizer89FCC DRAFTSet the timer1. In the standby mode, select Menu > Organizer > Countdown timer > Normal timer, Interval timer, or Settings.Normal timer measures the countdown time for tasks that have one period (timer name). Interval timer saves sets of countdown times with more than one period.2. Enter the time (in hh:mm:ss format), and select OK.3. Enter a note for the timer, and select Start. appears in the standby mode with the countdown timer set. When the time runs out, your device sounds an alarm, displays the timer note, vibrates (if set), and flashes its lights.Press any key during the alarm to stop the alarm. After 30 seconds the timer alert stops automatically.Change the timeAfter you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organizer > Countdown timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was, or enter a new note; select Start. Interrupt the timerAfter you have set the timer, you can stop the timer. In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.■StopwatchYou can use the stopwatch in your device to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.$

Microsoft RM-59 CDMA 800 & 1900 MHz/AMPS 800 MHz phone User Manual 6155and6155i v1 EN FCC DRAFT

Microsoft Mobile Oy CDMA 800 & 1900 MHz/AMPS 800 MHz phone 6155and6155i v1 EN FCC DRAFT

Manual

Navigation menu

Namespaces

Views

Navigation