| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1185622 |
| Application ID | VeYlxsW+Z/PN6y65GkGZCw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.16kB (1439444 bits) |
| Date Submitted | 2009-10-19 00:00:00 |
| Date Available | 2009-11-12 00:00:00 |
| Creation Date | 2009-07-16 16:07:36 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2009-09-18 09:30:38 |
| Document Title | RM595_EN_RUIM_FCC.fm |
| Document Creator | FrameMaker 6.0 |
| Document Author: | j33wu |
ra
ft
RM-595 User Guide
© 2009 Nokia. All rights reserved.
Nokia, Nokia Connecting People, and Navi are trademarks or registered
trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia
Corporation. Other product and company names mentioned herein may be
trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the
contents in this document in any form without the prior written
permission of Nokia is prohibited.
Includes RSA BSAFE cryptographic or security protocol software
from RSA Security.
ra
ft
Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes and improvements to any of the products described in
this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE
RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER
CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS" EXCEPT AS
REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE
THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
Reverse engineering of any software in the Nokia device is prohibited to
the extent permitted by applicable law. Insofar as this user guide contains
any limitations on Nokia’s representations warranties, damages and
liabilities, such limitations shall likewise limit any representations,
warranties, damages and liabilities of Nokia’s licensors.
The availability of particular products and applications for these products
may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Export controls
This device may contain commodities, technology, or software subject to
export laws and regulations from the US and other countries. Diversion
contrary to law is prohibited.
ra
ft
The third-party applications provided with your device may have been
created and may be owned by persons or entities not affiliated with or
related to Nokia. Nokia does not own the copyright or intellectual property
rights to the third-party applications. As such, Nokia does not take any
responsibility for end-user support, functionality of the applications, or the
information in the applications or these materials. Nokia does not provide
any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE
APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA
NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR
THAT THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS,
COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
FCC NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC can require
you to stop using your telephone if such interference cannot be eliminated.
If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by Nokia could void the user’s
authority to operate this equipment.
ra
ft
xxxxxxx/Issue 1
Contents
SAFETY........................................................................................ 7
1. Get started......................................................................... 11
Install the UIM card and battery ........................................................................
Insert and remove the microSD card.................................................................
Charge the battery..................................................................................................
Switch your device on or off ...............................................................................
Normal operating position ...................................................................................
Access codes.............................................................................................................
Nokia support on the web ....................................................................................
11
13
15
16
16
17
18
ft
2. Your device ........................................................................ 19
ra
Keys and parts (front) ............................................................................................
Keys and parts (back).............................................................................................
Standby mode and shortcuts...............................................................................
Active Standby.........................................................................................................
Keyguard....................................................................................................................
19
20
21
22
23
3. Call functions ..................................................................... 24
Make a call................................................................................................................
Answer or reject a call...........................................................................................
Conference call ........................................................................................................
Loudspeaker ..............................................................................................................
Voice dialling............................................................................................................
24
24
25
25
26
4. Write text .......................................................................... 28
Switch between input methods..........................................................................
Pinyin input method...............................................................................................
Stroke input method ..............................................................................................
Phrase input..............................................................................................................
Set predictive English input on and off............................................................
28
29
29
31
33
Traditional English input....................................................................................... 33
Predictive English input ........................................................................................ 33
Tips for writing text................................................................................................ 34
5. Voice commands................................................................. 36
Activate and use voice commands..................................................................... 36
Voice commands settings ..................................................................................... 37
6. Menu functions ................................................................. 38
ra
ft
Messaging .................................................................................................................
Contacts.....................................................................................................................
Log...............................................................................................................................
esurfing ......................................................................................................................
Web .............................................................................................................................
Best Tone ...................................................................................................................
Customer Service ....................................................................................................
Settings......................................................................................................................
Gallery ........................................................................................................................
Media..........................................................................................................................
Organiser ...................................................................................................................
Extras..........................................................................................................................
38
47
49
50
50
51
51
51
64
65
71
75
7. Accessories.......................................................................... 76
8. Battery and charger information ..................................... 77
Battery information................................................................................................ 80
Nokia battery authentication guidelines.......................................................... 81
Care and maintenance............................................................ 84
Additional safety information ............................................... 87
Index ........................................................................................ 95
SAFETY
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for further
information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use
is prohibited or when it may cause interference or
danger.
ft
ROAD SAFETY COMES FIRST
ra
Obey all local laws. Always keep your hands free to
operate the vehicle while driving. Your first
consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in
aircraft, near medical equipment, fuel, chemicals, or
blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this
product.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not
connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
■ About your device
ft
The wireless device (RM-595) described in this guide is approved
for use on the CDMA 800 MHz network. Contact your service
provider for more information about networks.
ra
When using the features in this device, obey all laws and respect
local customs, privacy and legitimate rights of others, including
copyrights.
Copyright protection may prevent some images, music, and other
content from being copied, modified or transferred.
Your device may have preinstalled bookmarks and links for thirdparty internet sites. You may also access other third-party sites
through your device. Third-party sites are not affiliated with
Nokia, and Nokia does not endorse or assume liability for them. If
you choose to access such sites, you should take precautions for
security or content.
Warning: To use any features in this device, other than
the alarm clock, the device must be switched on. Do not
switch the device on when wireless device use may
cause interference or danger.
Remember to make back-up copies or keep a written record of all
important information stored in your device.
ft
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
■ Network services
ra
To use the device you must have service from a wireless service
provider. Many of the features require special network features.
These features are not available on all networks; other networks
may require that you make specific arrangements with your
service provider before you can use the network services. Using
network services involves transmission of data. Check with your
service provider for details about fees in your home network and
when roaming in other networks. Your service provider can give
you instructions and explain what charges will apply. Some
networks may have limitations that affect how you can use
network services. For instance, some networks may not support
all language-dependent characters and services.
Your service provider may have requested that certain features be
disabled or not activated in your device. If so, these features will
not appear on your device menu. Your device may also have a
special configuration such as changes in menu names, menu
order, and icons. Contact your service provider for more
information.
ra
ft
This device supports WAP 2.0 protocols (HTTP and SSL) that run
on TCP/IP protocols. Some features of this device, such as sending
e-mail, browsing websites, or downloading files require network
support for these technologies.
10
1. Get started
■ Install the UIM card and battery
ft
Note: Always switch the phone off and
disconnect the charger and any other device
before removing the cover. Avoid touching
electronic components while changing the cover.
Always store and use the device with the cover
attached.
ra
Note: Always switch the device off and
disconnect the charger before removing the
battery.
Remove the back cover and battery
1. To remove the back cover,
with the back of the device
facing you, press the
release button, and lift up
the back cover.
11
B L-
4C
2. To remove the battery,
insert your finger into the
finger grip, and lift the
battery from its
compartment.
ra
ft
Insert the UIM card
Ensure that the contact area on
the UIM card is facing
downwards and the bevelled
corner on the card is facing
outwards from the top of the
device, and insert the UIM card
into the card slot.
L -4
12
Replace the battery and back cover
1. To insert the battery,
position the battery by
aligning the contacts with
those on the device, and
press down on the other end
of the battery to snap the
battery into place.
2. To replace the back cover,
insert the tabs at the top of
the cover into the slots in
the device, and press down
on the other end of the back
cover.
■ Insert and remove the microSD card
ra
ft
Use only compatible microSD cards approved by Nokia for
use with this device. Nokia uses approved industry
standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may
damage the card and the device and corrupt data stored
on the card.
13
Insert the microSD card
1. Remove the back cover. See step 1 in "Remove the back
cover and battery", p. 11.
2. Ensure that the contact area
on the microSD card is facing
downwards, and insert the
microSD card into the card
slot until it clicks into place.
ra
ft
3. Replace the cover. See step 2
in "Replace the battery and
back cover", p. 12.
Remove the microSD card
Important: Do not remove the memory card in
the middle of an operation when the card is being
accessed. Removing the card in the middle of an
operation may damage the memory card as well
as the device, and data stored on the card may be
corrupted.
1. Remove the back cover. See step 1 in "Remove the back
cover and battery", p. 11.
14
2. Press the microSD card slightly into the card slot,
release to eject the card, and remove it from the slot.
3. Replace the cover. See step 2 in "Replace the battery
and back cover", p. 12.
■ Charge the battery
Your battery has been partially charged at the factory. If
the device indicates a low charge, do the following:
ft
1. Connect the charger to a wall
socket.
ra
2. Connect the charger to the
device.
3. When the device indicates a
full charge, disconnect the
charger from the device, then
from the wall outlet.
You do not need to charge the battery for a specific length
of time, and you can use the device while it is charging. If
the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
15
■ Switch your device on or off
Press and hold the power key on
the keypad for at least three
seconds.
ra
ft
Warning: Do not switch the device on when
wireless phone use is prohibited or when it may
cause interference or danger.
■ Normal operating position
Your device has an internal antenna. Use
the device only in its normal operating
position.
16
ra
ft
Note: Your device may have
internal and external antennas. As
with any radio transmitting
device, avoid touching the
antenna area unnecessarily while
the antenna is transmitting or
receiving. Contact with such an
antenna affects the
communication quality and may
cause the device to operate at a higher power
level than otherwise needed and may reduce the
battery life.
■ Access codes
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device. Making an emergency call in the offline profile or
when the device is locked requires that the device
recognise the number to be an official emergency number.
It is advisable to change the profile or unlock the device by
entering the lock code before you make the emergency
call.
17
To activate the device when it is locked, enter the lock
code. The default lock code is 1234.
To define the security settings for your device, select
Menu > Settings > Security.
■ Nokia support on the web
ra
ft
Check www.nokia.com/support or your local Nokia
website for the latest guide, additional information,
downloads, and services related to your Nokia product.
18
2. Your device
■ Keys and parts (front)
1. Earpiece
2. Media keys
ft
3. Left selection key
4. Call key
5. Navi™ key; hereafter
referred to as scroll key
6. Keypad
ra
7. Power/End key
8. Middle selection key
9. Right selection key
19
■ Keys and parts (back)
1. Headset connector
2. Wrist strap eyelet
3. Flash
4. Volume keys
10
5. Camera key
6. Speaker
ra
9. Charger/USB port
10.Camera lens
ft
7. Release button
8. Microphone
20
■ Standby mode and shortcuts
Generally, instructions in this guide start from the standby
mode except when specifically indicated. To go to the
standby mode, press the power/end key.
Depending on your wireless service provider, some or all of
the following selection keys may appear in the standby
mode.
ra
ft
1. Signal strength — The signal
strength of the wireless
network at your current
location.
2. Battery level — The battery
charge level.
Go to
Menu
Names
3. Menu — Press the left
selection key to access the main menu.
4. Go to — Press the right selection key to quickly access
a certain feature.
5. Web — Press the middle selection key to access mobile
internet service.
Shortcuts in the standby mode:
21
• To access the list of dialled numbers, press the call key
once.
• To switch between General profile and Silent profile,
press and hold # for at least three seconds.
• To activate the radio function, press and hold * for at
least three seconds.
• For shortcuts of scroll key, see "My shortcuts", p. 56.
ft
■ Active standby
ra
To activate the active standby mode, scroll up in the
standby mode. To access a feature, scroll left or right to
select the feature and select Select. To end the active
standby navigation mode, select Exit.
To switch on the mode, select Menu > Settings > Display
> Active standby > Active standby mode.
To change the default application shortcuts, select
Menu > Settings > Display > Active standby > Personalise
view.
22
■ Keyguard
Keyguard locks the keypad to prevent accidental key
presses.
When the keypad is locked, calls still may be possible to
the official emergency number programmed into your
device. Enter the emergency number, and press the call
key. The number is displayed only after you have entered
its last digit.
ra
ft
To lock the keypad automatically when no keys are
pressed for a certain time, in the standby mode, select
Menu > Settings > Phone > Automatic keyguard > On.
To lock the keypad, close the slide, and select Lock.
To unlock the keypad, open the slide or press Unlock then
press * within 2 seconds.
If you receive a call when the keypad is locked, it is
automatically unlocked, and then locked again when you
end the call.
23
3. Call functions
■ Make a call
1. In the standby mode, enter the phone number,
including the country code and area code if necessary.
2. Press the call key.
ft
3. To end the call or to cancel the call attempt, press the
end key.
ra
■ Answer or reject a call
To answer a call, press the call key or open the slide. To
reject an incoming call, press the end key.
24
■ Conference call
Conference call (network service) allows you to take part
in a call with another two participants.
1. To call a third party during a call, select Options > New
call.
2. Enter the number you want, and press the call key.
3. When the new call is answered, press the call key.
ra
ft
4. To end the conference call, select Options > End all
calls, or press the end key.
■ Loudspeaker
Warning: Do not hold the device near your ear
when the loudspeaker is in use because the
volume may be extremely loud.
To activate the loudspeaker during a call, select Loudsp.
To deactivate the loudspeaker, select Normal. When a
headset is connected, select Heads.
The loudspeaker is deactivated automatically when a call
(or a call attempt) ends or when certain accessories are
connected.
25
■ Voice dialling
ra
ft
You can make a phone call by saying the name or the
number that is saved in the contact list of the device.
Voice tags are automatically created when a new contact
is added.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
should not rely solely upon voice dialling in all
circumstances.
As voice commands are language-dependent, before voice
dialling, select Menu > Settings > Phone > Language
settings > Recogn. language and your language.
To activate voice dialling, press and hold the right
selection key or the volume key down. A short tone
sounds, and Say a command is displayed.
To deactivate voice dialling, press the end key.
To make a call by voice dialling, clearly say Call then the
name or the number of the contact you want to dial. If the
device recognises the name you spoke, it shows a list of
matches.
26
D
ra
ft
To listen to a voice tag, select Menu > Contacts > Names
> a contact > Details > contact name > Options > Play
voice tag.
27
4. Write text
The input methods available in the phone are preset
according to the market where it will be sold.
This phone supports simplified Chinese input methods.
To switch writing language, when writing text, press and
hold #, and select Writing language and the desired
language.
ft
■ Switch between input methods
Pinyin
ra
Input method indicators are shown at the top of the
display:
Stroke
Uppercase
Lower case
Number
input
Not all the methods may be available in all circumstances.
Always check the indicator to see which input method is
in use.
28
To switch between available input methods, press #
repeatedly until the indicator of the desired input method
is displayed.
■ Pinyin input method
ft
The pinyin symbols are printed on the number keys. You
only need to press a key once, regardless of the position of
the symbol on the number key. The phone makes logical
combinations of the pinyin symbols.
To input a character using the pinyin input method:
ra
1. Press the number key once for each pinyin symbol you
want to input (use "v" for "u").
2. Press 1 repeatedly until you get the desired tone mark.
3. If necessary, press * repeatedly to highlight the desired
pinyin combination.
4. Scroll to the desired Chinese character, and select OK.
■ Stroke input method
The strokes constituting Chinese characters have been
divided into five categories: horizontal, vertical, left29
falling, dot, and turning. Each category corresponds to a
number key from 1 to 5, respectively.
ra
ft
The strokes are classified according to the following table:
30
To use the stroke input method:
1. In the standard stroke order, press the number keys to
input the strokes.
Tip: if you are not sure which stroke to use or
which category it belongs to, press 6 to
substitute that stroke, then continue with the
subsequent strokes. A question mark appears in
the input area to represent that stroke.
ra
■ Phrase input
ft
2. Scroll to the desired Chinese character, and select OK.
You may input a phrase of no more than seven Chinese
characters at a time.
1. Press the relevant number keys to enter the syllable or
pinyin initial, or first strokes for the first character of
the phrase.
2. Press 0 to enter a separator; or, if in the pinyin mode,
press 1 repeatedly to enter the tone mark of the
character you want.
3. Enter the syllable or pinyin initial, or first strokes of the
next Chinese character.
31
4. Repeat step 2 and 3, if necessary, to enter the syllables
or pinyin initials, or first strokes of all the characters in
the phrase.
5. If in the pinyin mode, press * repeatedly, if necessary,
to highlight the pinyin combination you want.
6. Scroll through the candidate list to the desired phrase,
and select OK.
ra
ft
Not all phrases are stored in your phone. To create a
phrase of no more than seven characters, when no input
symbol or prediction list is displayed, select Options >
User phrases > Add. When the database becomes full, the
new phrase replaces the phrase that has not been
accessed for the longest time.
Use a separator to separate pinyin strings for syllables of
different characters or the strokes of different characters.
When you enter a separator, the phone predicts
characters or character strings that can form a phrase
with the possible candidates of the combination of pinyin
or stroke strings and separators, if any, that you have
entered.
32
■ Set predictive English input on and off
When writing text in English, to switch predictive text
input on or off, press and hold #, and select Prediction on
or Prediction off.
■ Traditional English input
Press a number key, 2 to 9, repeatedly until the desired
character appears.
ra
ft
If the next letter you want is located on the same key as
the present one, wait until the cursor appears, or scroll
right, and enter the letter.
Not all characters available under a number key are
printed on the key. The available characters depend on the
selected Writing language.
The most common punctuation marks and special
characters are available under the number key 1. To
access the list of special characters, press *.
■ Predictive English input
33
Predictive English input is based on a built-in dictionary to
which you can also add new words.
1. Start writing a word using the keys 2 to 9. Press each
key only once for one letter.
2. To confirm a word, scroll right or add a space.
• If the word is not correct, press * repeatedly until
the desired word appears, and confirm it.
ra
ft
• If the ? character is displayed after the word, the
word you intended to write is not in the dictionary.
To add the word to the dictionary, select Spell.
Enter the word using traditional text input, and
select Save.
• To write compound words, enter the first part of the
word, and scroll right to confirm it. Write the last
part of the word, and confirm the word.
3. Start writing the next word.
■ Tips for writing text
The following functions may also be available for writing
text:
34
• To insert a number when no input symbol is displayed,
press and hold the desired number key.
• To insert a space when there is no candidate or
prediction list displayed, press 0.
• To enter a special character after you have finished
entering a word or character, press *.
• To repeat a character to the left of the cursor in the
editing window, press and hold *.
ra
ft
• To end the Chinese character prediction, select Back,
or press the relevant keys to start entering new text.
35
5. Voice commands
■ Activate and use voice commands
To activate voice command, in the standby mode, press
and hold the volume key down or the right selection key.
The following options are listed:
ft
• Call — to make a call, say "Call" and
followed by a name or a phone number from Contacts
ra
• Send Text — to send a text message, say
"Send text" and followed by a name or a phone number
from Contacts
• Send MMS — to send an MMS, say "Send
MMS" and followed by a name or a phone number
from Contacts
• Lookup — to retrieve and display information
of a contact, say "Lookup" and followed by the name
from Contacts
• Go To
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Page Mode : UseOutlines
XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool : FrameMaker 6.0
Modify Date : 2009:09:18 09:30:38+08:00
Create Date : 2009:07:16 16:07:36Z
Metadata Date : 2009:09:18 09:30:38+08:00
Format : application/pdf
Title : RM595_EN_RUIM_FCC.fm
Creator : j33wu
Producer : Acrobat Distiller 8.1.0 (Windows)
Document ID : uuid:e8eff9bf-b1a7-41a4-91e4-3bc65a6772bf
Instance ID : uuid:404da2df-dd85-4312-b2ab-971fc85a200a
Has XFA : No
Page Count : 97
Author : j33wu
EXIF Metadata provided by EXIF.tools