Microsoft RM-60 Dual Band Cellular Phone User Manual Axis 6235 i MTVSN 923598v1 030305x1

Microsoft Mobile Oy Dual Band Cellular Phone Axis 6235 i MTVSN 923598v1 030305x1

Manual

Nokia 6235, Nokia 6235i, Nokia

6236, and Nokia 6236i User Guide

LEGAL INFORMATION

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the products Nokia

6235, Nokia 6235i, Nokia 6236, and Nokia 6236i are in conformity with the provisions of the

following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be

found at http://www.nokiausa.com/phones/declaration_of_conformity/.

PART NO. 9235986, ISSUE NO. 1

Nokia, Nokia Connecting People, Nokia 6235, Nokia 6235i, Nokia 6236, Nokia 6236i, Pop-

Port™, and the Nokia Original Enhancements logos are trademarks or registered trademarks

of Nokia Corporation. Other company and product names mentioned herein may be

trademarks or trade names of their respective owners.

US Patent No. 5818437 and other pending patents. T9 text input software

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java™ is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6235, Nokia 6235i,

Nokia 6236, and Nokia 6236i products. Nokia operates a policy of ongoing development.

Nokia reserves the right to make changes to any of the products described in this document

without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT

AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO

THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE

RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS This device may contain commodities, technology, or software subject to

export laws and regulations from the U.S. and other countries. Diversion contrary to law is

prohibited.

FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for

example, when using a telephone in close proximity to receiving equipment). The FCC or

Industry Canada can require you to stop using your telephone if such interference cannot be

eliminated. If you require assistance, contact your local service facility. This device complies

with part 15 of the FCC rules. Operation is subject to the condition that this device does not

cause harmful interference.

Contents

For your safety 5

1. Phone at a glance.................................................................... 10

2. Set up your phone................................................................... 15

3. Text entry................................................................................. 22

4. Messages .................................................................................. 25

5. Call log ..................................................................................... 40

6. Contacts ................................................................................... 44

7. Camera ..................................................................................... 52

8. Gallery ...................................................................................... 55

9. Media........................................................................................ 57

10.Settings................................................................................... 61

11.Organizer ................................................................................ 80

12.Mobile Web ............................................................................ 90

13.Extras ...................................................................................... 93

14.PC Connectivity...................................................................... 94

15.Enhancements ........................................................................ 97

16.Reference information........................................................... 98

Care and maintenance .............................................................. 100

Additional safety information.................................................. 101

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the

vehicle while driving. Your first consideration while driving should be

road safety.

INTERFERENCE

Do not switch the device on when wireless phone use is prohibited or

when it may cause interference or danger.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical

equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELING

Don't use the device at a refueling point. Don't use near fuel or

chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the device where blasting is in

progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all

important information.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the device is switched on and in service. Press the end key as

many times as needed to clear the display and return to the main

screen. Enter the emergency number, then press the call key. Give

your location. Do not end the call until given permission to do so.

■About your device

The wireless devices described in this guide are approved for use on the CDMA

800, 1900 and AMPS networks. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and respect privacy and the

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless phone use may cause interference or danger.

■Network Services

To use the device you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to

function. These Network Services may not be available on all networks or you

may have to make specific arrangements with your service provider before you

can utilize them. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks

may have limitations that affect how you can use Network Services. For instance,

some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Contact

your service provider for more information.

For your safety

■Shared memory

The following device features may share memory: contacts; text messages;

photos, images, and tones in Gallery; calendar notes; games; and applications.

Use of one or more of these features may reduce the memory available for the

remaining features sharing memory. If your phone displays a message that the

memory is full when you try to use a shared memory feature, delete some of the

information or entries stored in the shared memory features before continuing.

Some of the features, such as photos, images, and tones in Gallery; text

messages; and applications may have a certain amount of memory specially

allotted to them in addition to the memory shared with other features.

Welcome

Congratulations on your purchase of the Nokia 6235, Nokia 6235i, Nokia 6236,

or Nokia 6236i mobile phone. Your device provides many functions that are

practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator,

calendar, camera, FM radio, and more. Your device can also connect to a PC,

laptop, or other device using a data cable or infrared. To personalize your device

you can set your favorite ringing tones.

■Register your device

Make sure to register your device at www.nokiausa.com/support/warranty/ or

call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better

if you should need to call a customer center or to have your device repaired.

■Getting help

If you need help, Nokia Customer Care is available for assistance. Before calling,

we recommend that you write down the Electronic serial number (ESN) and your

zip code (only in the US) and have it available.

Find your device label

The ESN is found on the type label (1),

which is located beneath the battery

on the back of the device. See

’Remove the back cover,’ p. 16.

Contact Nokia

Please have your product with you when contacting any of these numbers:

Nokia Customer Care Center, USA

Nokia Inc.

Tel: 1-888-NOKIA-2U (1-888-665-4228)

Fax: 1-813-249-9619

TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Customer Care Center, Canada

Nokia Products Ltd.

601 Westney Road South

Welcome

Ajax, Ontario L1S 4N7

Tel: 1-888-22-NOKIA (1-888-226-6542)

Fax: 1-905-619-4360

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version

and an interactive tutorial for this product may be available at the Web site

www.nokiausa.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals,

including those with disabilities. For more information visit the Web site at

www.nokiaaccessibility.com.

Phone at a glance

1. Phone at a glance

1. Power key

2. Earpiece

3. Headset connector

4. Five-way joystick

5. Right selection key

6. End key

7. Pop-Port™ connector

8. Microphone

9. Charger port

10. Keypad

11. Call key

12. Left selection key

13. Display screen

14. Volume key

■The start screen

Depending on your wireless

service provider and the model number of your device, some or all of the

following selection keys may appear on the start screen.

The start screen is home base and indicates your device is in standby mode.

Battery level (1)—A higher bar indicates

more battery power.

Menu (2)—Press the joystick to select this

option.

Phone at a glance

Names or network operator menu item (3)—Press the Right selection key to

select this option.

Go to(4)—Press the Left selection key to select this option.

Signal strength (5)—A higher bar indicates a stronger network signal.

■Quick keys

Depending on your wireless service provider and the model number of your

device, some or all of the following joystick shortcuts may be available from the

start screen.

Scroll up—Activate camera from standby mode.

Scroll right—View calendar.

Scroll down—Go to contacts list.

Scroll left—Create a text message.

Press joystick—Select highlighted menus and submenus.

■Indicators and icons

Depending on your wireless service provider and the model number of your

device, some or all of the following indicators and icons may appear on the start

screen.

You have new text or picture messages. See ’Text messages,’ p. 26.

You have new multimedia messages. See ’Multimedia messages,’ p. 31.

You have a picture message in your inbox. See ’Receive and save a picture

message,’ p. 30.

You have new voice messages. See ’Voice messages,’ p. 36.

Device keypad is locked. See ’Keyguard,’ p. 21.

Device is set to the silent profile. See ’Profiles,’ p. 62.

Alarm clock is set to on. See ’Alarm clock,’ p. 81.

Countdown timer is running. See ’Countdown timer,’ p. 88.

Stopwatch timer is running in the background. See ’Stopwatch,’ p. 88.

Integrated hands-free is active. See ’Use the loudspeaker,’ p. 19.

Timed profile is selected. See ’Profiles,’ p. 62.

or An enhancement is connected to the device.

See ’Enhancements,’ p. 98.

Phone at a glance

Voice privacy encryption is active in the network.

or Location info sharing is set to Emergency or ON. See Location info

sharing, 65.

You are in a digital network. See ’Network Services,’ p. 6.

You are in an analog network. See ’Network Services,’ p. 6.

You are in a 1XRTT network. See ’Network Services,’ p. 6.

You are roaming outside your home network. See ’Roaming options,’ p. 77.

■Get the most out of this guide

The following sections illustrate the various components of your phone.

Familiarize yourself with these sections to help you understand the instructions

that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly. For example, press 7 means

press the key on the keypad that is labeled with the number 7 and letters

"pqrs."

• Press and hold means to press and hold a key for 2–3 seconds; then release

the key.

• Selection keys and the joystick are used to select a menu option. To select an

option, press the selection key below the menu item on the device screen.

• The joystick is used to move up, down, left, or right in the menus.

• Call and end keys: Press the call key to place a call or to answer an incoming

call. Press the end key to end a call or press and hold to return to the start

screen.

■Device menus

Device features are grouped according to function and are accessed through the

main menus. Each main menu contains submenus and lists from which you can

select or view items and customize your device features. You can access these

menus and submenus by using the scroll method or by using shortcuts.

You can change your menu view from list to grid. See ’Display settings,’ p. 63.

Note: Some features may not be available, depending on your network.

For more information, contact your wireless provider.

Phone at a glance

Scroll method

You can use the joystick to move up, down, left and right through the options.

Press the joystick to select an item.

1. At the start screen, select Menu, and scroll through the

main menus using the joystick.

As you scroll through the menus, the menu number

appears in the upper right corner of the display. On the

right side of the display screen is a scroll bar with a tab

that moves up or down as you scroll through the menus. This tab provides a

visual representation of your current position in the menu structure.

2. When you arrive at a menu, press the joystick, Select, to enter submenus.

Select Back (the Right selection key) to return to the previous menu. Press

the end key to return to the start screen from any menu or submenu.

■Go to function

The Go to menu allows you to change what you can access from the Left

selection key on your device. With this function, your most frequently used

functions can be quickly accessed from the Go to menu on the start screen.

Choose Go to functions

1. Go to can be accessed by pressing the Left selection key; or, at the start

screen, select Go to > Options > Select options.

2. Use the joystick to highlight the desired function.

3. Select Mark to add a function. Select Unmark to remove a function.

4. Select Done when you have added all desired functions.

5. Select Yes to save the changes.

6. At the start screen, select Go to to display a list of the functions that you

selected in step 3.

Organize functions

1. At the start screen, select Go to > Options > Organize.

Phone at a glance

2. Use the joystick to scroll up or down and highlight the function you wish to

rearrange, and select Move > Move up, Move down, Move to top, or Move to

bottom.

3. Select Done > Yes to save the changes.

In-phone help

Many features have brief descriptions (help text) that can be viewed on the

display.

To activate help text, at the start screen, select Menu >Settings > Phone settings

> Help text activation > On or Off.

To view these descriptions, scroll to a feature and wait for about 14 seconds. Use

the joystick to view all the description or press Back to exit.

Set up your phone

2. Set up your phone

■Antenna

In the Nokia 6235, Nokia 6235i, Nokia 6236, and

Nokia 6236i phones, the antenna is internal and

located towards the top of the device. A GPS antenna

is activated when you place an emergency call or

when you select On from the Location info sharing

menu. See ’Location info sharing,’ p. 65.

Hold the device as you would any other telephone

with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting

device, do not touch the antenna

unnecessarily when the device is switched

on. Contact with the antenna affects call

quality and may cause the device to

operate at a higher power level than

otherwise needed. Not touching the

antenna area during a phone call optimizes

the antenna performance and battery life.

■Change battery

Note: Before removing the cover, always switch off the power and

disconnect the charger and any other device. Avoid touching electronic

components while changing the covers. Always store and use the device

with the covers attached.

Set up your phone

Remove the back cover

With the back of the device facing

you, slide the back cover toward the

bottom of the device and remove.

Remove the battery

After you have removed the back

cover, insert your finger into the

finger grip, and lift the battery from

its compartment.

UIM (CDMA SIM) card

slot

Your device has a UIM card slot built into the mechanics, located under the

battery. The UIM is not functional in this model. Do not place any objects in this

slot.

Replace the battery

1. Insert the gold-colored contact

end of the battery, into the

battery slot.

2. Push down on the other end of

the battery to snap the battery

into place.

Replace the back cover

1. Set the back cover on the device

so that the cover tabs align with

the slots in the device.

2. Slide the back cover towards the

top of the device until the back

cover is securely in place.

Set up your phone

Important: Do not remove the front cover of this device. Attempts to

remove the front cover may damage the device. If your device requires

service, contact Customer Care. See ’Contact Nokia,’ p. 8.

Charge the battery

1. Plug the charger transformer into a standard ac outlet.

2. Insert the charger output plug into

the round jack at the bottom end of

the device.

After a few seconds, the battery

indicator in the display starts to

scroll from bottom to top. If the

battery is completely discharged, it

may take a few minutes before the charging indicator appears on the display

or before any calls can be made.

■Turn your device on or off

To turn your device on or off, press and hold the

Power key on top of the device for at least 3

seconds.

■Connect the headset

You can connect a compatible headset, such as HS-

5, to your device. See ’Enhancements,’ p. 98.

1. Plug the headset connector into the

Pop-Port™ connector at the bottom end

of your device. The icon appears on

the start screen.

2. Position the headset on your ear.

With the headset connected, you can

make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the call key to place a call.

See ’Phone at a glance,’ p. 10.

Set up your phone

• Press the end key to end a call.

You can also plug a compatible headset, such as the HS-9 Universal Headset, into

the 2.5 mm headset jack on your device to allow hands-free operation. See

’Enhancements,’ p. 98.

■Change front cover

Note: Before removing the cover, always switch off the power and

disconnect the charger and any other device. Avoid touching electronic

components while changing the covers. Always store and use the device

with the covers attached.

Remove the back cover and battery

For instructions to remove back cover and battery, see ’Remove the back cover,’ p.

16.

Remove the front cover

Gently pull the bottom of the front cover away from the rest of the device, and

remove the front cover.

Install the keymat and front cover

1. Remove the keymat from the old front cover.

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the phone, and snap the front cover

into place.

Warning: Always replace the front cover before replacing the battery

and the back cover. Replacing the back cover first may cause damage to

your phone.

Replace the battery and back cover

For instructions to replace back cover and battery, see ’Replace the battery,’ p. 16,

and ’Replace the back cover,’ p.16.

Set up your phone

■Answer calls

Answer or silence an incoming call

• Press the call key or select Answer to answer the call.

• Press the end key to reject the call.

• Select Silence to mute the ringing tone then select Dismiss, or do nothing and

the call is eventually diverted to voicemail.

If your device is set to Silent in the Settings >Profiles menu, select Dismiss,

and the call is rejected and diverted to voicemail.

Adjust the earpiece volume

Whether in or out of a call, you can scroll the volume key located on the left side

of your device up or down to adjust the volume of the earpiece. When you adjust

the volume, a bar chart indicates the volume level.

Answer a call with the keypad locked

To answer a call with the keypad locked, press the call key or select Answer.

During the call, all features function normally. When you end or reject the call,

the keypad automatically relocks. See ’Keyguard,’ p. 21.

When the keypad lock is on, calls still may be possible to the official emergency

number programmed into your device. Enter the emergency number and press

the call key.

Use the loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is

in use, because the volume may be extremely loud.

You can use your device as a loudspeaker:

• To activate the loudspeaker while in a call select Loudsp.

• To deactivate the loudspeaker during a call, select Normal.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends

or when certain enhancements are connected.

Set up your phone

Options during a call

Many of the options that you can use during a call are network services. Check

with your wireless service provider for more information.

1. Select Options during a call to display the following:

Loudspeaker/Normal—Activate or deactivate the loudspeaker while in a call.

New call—Initiate a conference call. See ’Conference calling,’ p. 21.

Save—Add a number while in a call to your contact list. This option is

available only when entering numbers during a call.

Add to contact—Add a contact while in a call to contact list. This option is

available only when entering numbers during a call.

End all calls—Disconnect from all active calls.

Touch tones—Enter the number(s), and select Tones to send the number(s) as

tones.

Contacts—View the contacts list.

Menu—View the phone menu.

2. Scroll to an option, and Select to activate the option or enter its submenu.

■Make a call

To make a call, at the start screen, enter the number you want to call and press

the call key.

Use the contacts list

To begin entering names in your contacts list:

1. Key in the number at the start screen.

2. Select Options > Save.

3. Enter a contact name and select OK.

To use the contacts list, from the start screen, select Names and scroll to the

contact you want to use.

Set up your phone

Use the keypad

1. Enter the phone number (including the area code), and press the call key. To

delete a character to the left of the cursor, select Clear.

2. Press the end key to end the call or select End call to cancel the call attempt.

Use the last dialed number

1. At the start screen, press the call key to display the last 30 numbers dialed.

2. Select the number (or name) you wish to redial, and press the call key.

Conference calling

Conference calling is a network service that allows you to take part in a

conference call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or select Search to

retrieve a number from the contacts list.

4. Select OK and the first participant is put on hold and a data query appears.

5. When the second participant picks up, press the call key to connect the calls.

6. To end the conference call, select Options > End all calls or press the end key.

■Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed

accidentally. If the keypad is locked, it unlocks when you answer a call. After the

call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency

number programmed into your device. Enter the emergency number and press

the call key.

Lock the keypad

Press the joystick; then press * within two seconds.

Set up your phone

Unlock the keypad

Select Unlock; then press * within two seconds.

Text entry

3. Text entry

You can use two methods for entering text and numbers: Standard mode and

Predictive text mode.

• Select Clear to backspace the cursor and delete a character.

• Select and hold Clear to backspace continuously and delete characters.

■Standard mode

Standard mode is the only way to enter text into the contacts list and to rename

caller groups.

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second

letter, etc. If you pause briefly, the last letter in the display is accepted and

your device awaits the next entry.

•Press 0 to enter a space, thereby accepting a completed word.

•Press 1 to insert a period into your message.

•Press and hold * to display a complete list of special characters.

•Press and hold # to bring up the Editor settings (Number mode, Dictionary on/

Dictionary off, Writing language).

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry

screen to bring up the Editor settings menu list of Number mode, Dictionary on/

Dictionary off, and Writing language. Select Number mode, and the device will

return to the message entry screen and switch the ABC icon in the upper left

corner of the display to the 123 icon (or back).

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and

hold * if predictive text is on). Press * again to cycle through all available

characters. You can navigate through the list of special characters by using the

Text entry

joystick. Once a character is highlighted, select Insert to insert the character into

your message.

■Predictive text mode

Predictive text mode allows you to write messages quickly using your keypad and

the built-in dictionary. Predictive mode is much faster than the standard mode

method because you only press the corresponding key on your keypad once for

each letter.

Activate or deactivate

1. At any text entry screen, select Options > Dictionary on/Dictionary off.

2. If you are turning predictive text on, select the language of your choice.

Text entry

The illustration below simulates your display each time a key is pressed. For

example, to write Nokia with predictive text on and with the English dictionary

selected, press each of the following keys once:

the 6 key the 6 key the 5 key the 4 key the 2 key

• Press 0 to enter a space, and begin writing the next word.

• If a displayed word is not correct, press * to see other matches. To return to

the previous word in the list of matches, select Prev.

•If ? appears after a word, select Spell to add the word to the dictionary.

• Press 1 to insert a period into your message.

• Press and hold * to display special characters. Press * again to cycle through

all available characters.

■Change case and mode

Press # to switch between uppercase, lowercase, and sentence case text, and

between Standard and Predictive text mode. Case and mode are indicated by the

following icons that appear in the upper left of the display screen.

Uppercase text: standard mode is on.

Text entry

Lowercase text: standard mode is on.

Sentence case text: standard mode is on. This option is available only

at the beginning of a sentence.

Uppercase text: predictive text is on.

Lowercase text: predictive text is on.

Sentence case text: predictive text is on. This option is available only

at the beginning of a sentence.

Messages

4. Messages

If you have subscribed to a message network service, you can send

and receive messages to compatible phones that also subscribe to a message

service. If supported by your service provider, you can also send and receive

multimedia messages, and e-mail. See ’Text entry,’ p. 24.

When composing text messages, picture messages, or multimedia messages, the

number of characters allowed appears in the top right corner of the message. The

use of special (Unicode) characters takes up more space. If there are special

characters in your message, the indicator may not show the message length

correctly. Before the message is sent, the device tells you if the message exceeds

the maximum length allowed for one message.

Important: Exercise caution opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

Note: When sending messages, your device may display Message sent.

This is an indication that the message has been sent by your device to the

message center number programmed into your device. This is not an

indication that the message has been received at the intended

destination. For more details about messaging services, check with your

service provider.

■Text messages

Write and send

1. At the start screen, select Menu > Messages > Text messages > Create

message. To go quickly to the Create message display, scroll left from the

start screen.

2. Compose and send a message using the keypad. Some or all of the following

Options are available while composing your message:

Preview—Preview the message when sending a picture message.

Sending options—Mark or Unmark the sending options of a single message as

Urgent, Delivery note, Callback no., or Signature. See ’Change sending

options,’ p. 29.

Clear text—Erase all text from the message editor.

Messages

Insert picture—Insert a picture from Templates folder into your message.

Change picture—Change the picture in a picture message.

Delete picture—Delete the picture in a picture message.

Insert contact—Insert a name from your contacts list into your message.

Insert number—Insert a phone number or find a phone number in the

contacts list.

Save message—Select Drafts to save the message in the Drafts folder; select

Templates to save the message as one of your predefined templates in the

Templates folder.

Exit editor—Exit the message editor.

Use template—Insert a predefined template into your message. See

’Templates’ 28.

Insert smiley—Insert a smiley into your message.

Insert word —Enter a word and insert it into your message. This option is

available if predictive text is turned on.

Insert symbol—Insert a special character into your message. This option is

available if predictive text is turned on.

Writing language—Choose the language you want to use.

Dictionary on—Turn the predictive text on or off.

Matches—View matches in the dictionary for the word you want to use.

3. To send the message, select Send > Send to number, Send to e-mail, Send to

distrib. list (if a distribution list has been created), or Send to many. Enter the

recipient’s phone number or select Search to retrieve a number from

Contacts, and select OK.

4. To resend, edit or view recipients for the message, select Resend > Send, Edit

message or View recipients.

Distribution list

The distribution list allows you to send messages to a group of contacts. At the

start screen, select Menu > Messages > Distribution lists.

To create a distribution list select New list if lists have not been created or

Options > Create new list > name your list > OK to create additional lists. To

populate your list, select Add new and select a contact from your contacts list.

Messages

To use, rename, or modify a distribution list highlight the distribution list and

select Options > Create new list, Send text msg., Send multimedia, Rename list,

Clear list, or Delete list.

Templates

Templates are short, prewritten messages that can be recalled and inserted into

new text messages.

1. At the start screen, select Menu > Messages > Text messages > Create

message > Options > Use template.

2. Select one of the available templates.

3. Select Send > Send to number, Send to e-mail, Send to many, or Send to

distrib. list (if a distribution list has been created) > Select.

A distribution list only contains phone numbers of recipients and is selected

from a list of predefined groups you create.

4. Enter the recipient’s phone number or select Search and select a number from

your contacts list. Select Send.

Read message

When you receive a message, a notification message displays.

1. Select Show to read the message or Exit to dismiss the notification and read

the message later.

2. Scroll up or down to view the whole message, if necessary.

Options

When you read a text message, some or all of the following options are available:

Delete—Discard the message.

Use number—Use or save the number. Select Options > Add to contact, Send

message, or Call.

Use web link—Displays if a URL is included in the message.

Save address—Lists the e-mail addresses included in the message. Select Save to

save the e-mail address as a new phone book entry or select Options > Add to

contact or Send e-mail. The Save address option displays only if the message

contains an e-mail address.

Save picture—Saves a picture to the Templates folder, if you receive a picture in

the message. Must be supported by service provider.

Messages

Save—Save the message to Sent items, Archive, Templates, or a folder you have

created.

Forward—Forward the message to another phone number or e-mail address.

Rename—Edit the title of the message.

Reply to message

1. Select Reply > Empty screen, Original text, Template, or one of the predefined

answers, then compose your reply using the keypad.

2. Create the reply, and select Send. The sender’s phone number or e-mail is

used as the default.

Change sending options

1. To change sending options for all future text messages, at the start screen,

select Menu > Messages > Text messages > Message settings > Sending

options.

2. Select the setting you wish to change:

Priority—Set the priority of the note as Normal or Urgent.

Delivery note—A note is sent to you confirming delivery of the message.

Select On or Off.

Send callback number—A callback number is sent to the recipient. Select Off

or your phone number.

Signature—Select On to create a signature to send with text messages, or

select Off to turn this feature off.

Change message settings

1. At the start screen, select Menu > Messages > Text messages > Message

settings > Other settings.

2. Select the setting you wish to change:

Message font size—Select Small font or Large font.

Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or

Off. When the message memory is full, your device cannot send or receive any

Messages

new messages. However, you can set your device to automatically replace old

messages in the Inbox and Outbox folders when new ones arrive.

Save sent messages—Select Always save, Always prompt, or Off.

Queue msgs. when digital unavailable—Select On, On prompt, or Off.

Messages are stored in the Outbox until they can be sent with digital service.

■Picture messages

Your device comes with five preloaded pictures. You can save more pictures. If

necessary, you can overwrite any of the preloaded pictures. Pictures can be

attached to a message and sent using a text message to compatible phones.

Picture messages behave the same as text messages, but pictures take up more

memory than text message. You cannot send a picture message using e-mail.

Pictures are stored in the Images folder in Gallery. See ’Gallery,’ p. 56.

Receive and save a picture message

Note: Only compatible devices that offer picture message features can

receive and display picture messages.

When you receive a picture message, your device beeps, displays 1 message

received (or multiple messages received), and displays the messaging icon in

the upper left corner of the start screen as a reminder. When you have unopened

picture messages in your inbox displays.

Select Show to view the picture message, or Exit to view the picture message in

your inbox later. If you have more than one picture message, scroll and select the

message you want to view. Use the joystick to view the whole picture if

necessary.

You can save a received picture in your Templates folder by selecting Options >

Save picture. Enter a title and select OK. If your Templates folder is full of

pictures, you can scroll to the picture you want to replace and choose Select.

Compose and send a picture message

When you insert a standard picture into a message, the number of characters

that can be added changes. The number of characters is shown in the upper right

corner of the display screen.

1. From the start screen, select Menu > Messages > Multimedia msgs. > Create

message.

2. Write the message, and select Options > Insert > Image.

Messages

3. Open the folder that contains the picture you want to insert and select

Options > Insert.

To view another picture, select Back or Options > Insert, scroll to another

picture, and select Options > Insert.

4. Select Search to retrieve a phone number from your contacts list, Send to

enter the phone number, or Options > Send to e-mail, Send to many, or Send

to distrib. list (if a distribution list has been created) > Select.

To view or change the picture, select or Options > Preview or Delete picture.

■Multimedia messages

A multimedia message can contain text, sound, a picture, and a video clip. Your

device supports multimedia messages that are up to 300 KB. If the maximum size

is exceeded, the device may not be able to receive the message. Depending upon

your network, you may receive a message that includes an Internet address

where you can go to view the multimedia message. Pictures are scaled to fit the

display area of the device. Your device has a multimedia message viewer for

playing messages and a multimedia inbox for storing saved messages. Once you

save the multimedia message, you can use the image as a screen saver or the

sound as a ringing tone unless protected by copyright.

The default setting of the multimedia message service is generally on. The

appearance of a multimedia message may vary depending on the receiving

device.

Important: Exercise caution opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

content from being copied, modified, transferred, or forwarded. This function can

be used only if it is supported by your service provider or network operator. For

availability and a subscription to the multimedia messaging service, contact your

service provider or network operator.

Note: Only devices that offer compatible multimedia message features

can receive and display multimedia messages. Multimedia message

objects may contain viruses or otherwise be harmful to your device or PC.

Do not open any attachment if you are not sure of the trustworthiness of

the sender.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG

Messages

• Sound: SP-MIDI, AMR audio, QCELP, EVRC, and monophonic ringing tones

• Video: clips in H.264 (Profile 0, level 10) format with MPEG-4 (SVPO), 3GPP,

3GPP2, with AMR audio

If a received message contains unsupported elements, these elements may be

replaced with the text Object format not supported.

You cannot receive multimedia messages if you have a call in progress, games or

other applications running, or an active browsing session. Because delivery of

multimedia messages can fail for a variety of reasons, do not rely solely upon

them for essential communications.

MMS settings

Before you can use the multimedia message feature, you must specify whether

you want to receive messages at all times or only if you are in the service

provider’s home system. This feature is a network service. check with your service

provider for more information.

The default setting of the multimedia message service is generally on. The default

setting to receive a multimedia message is generally on the receiving device.

Allow or block multimedia reception

You can choose to receive all messages, to block all messages, or to receive

messages only when you are in the service provider’s home network.

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Allow multimedia reception and one of the following:

Yes—Allow all incoming messages. When new messages arrive, you are notified

with Multimedia message received or %N multimedia messages received.

In home network—Allow incoming messages only if you are in the service

provider’s home system. This is a network service. Check with your service

provider for more information.

No—Block all incoming messages.

Retrieve or reject multimedia messages

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Incoming multi- media messages > Retrieve to automatically retrieve

all messages to your inbox, Retrieve manually to choose which messages you

want to retrieve to your inbox, or Reject to reject all incoming multimedia

messages.

Messages

When messages are available, you are notified 1 multimedia message available or

%N multimedia messages available.

Allow or block advertisements

This setting is not available if multimedia reception is blocked.

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings > Allow advertisements > Yes or No.

Other MMS settings

Other multimedia settings include saving your messages to the Sent items folder.

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings and one of the following:

Save sent messages—Select Yes to save sent multimedia messages to the Sent

items folder or No to discard

Delivery reports—Select On to be informed if the message was delivered or Off to

not be informed.

Default slide timing—Set the default time in mm:ss format for each slide in an

MMS to remain on the screen.

Folders

Your device has the following folders under Messages > Multimedia msgs..

Inbox—Contains received multimedia messages.

Outbox—Contains multimedia messages that you have sent and are still waiting

to be transmitted.

Sent items—Contains sent multimedia messages.

Saved items—Contains saved multimedia messages that you can send later.

Write and send multimedia messages

1. From the start screen, select Menu > Messages > Multimedia msgs. > Create

message.

2. Enter your message text, and select Options > Insert > Image, Sound clip, or

Video clip. The list of available folders in the Gallery displays.

3. Open the desired folder, scroll to the image, sound clip, or video clip and

select Options > Insert.

The indicator in the message header means that a picture, sound clip, or video

clip has been attached.

Messages

content from being copied, modified, transferred, or forwarded.

4. To add a new page or slide to the message, select Options > Insert > Slide.

This applies only if there is no video clip in the message

Each slide can contain text, one image, and one sound clip. If the message

contains several slides, you can open the desired slide by selecting Previous

slide, Next slide, or Slide list.

5. To set the time interval between the slides, select Options >Slide timing.

Enter the time interval in mm:ss, and select OK.

6. To move the text to the top or bottom of the message, select Options > Place

text first or Place text last (default).

7. To insert a name from contacts, select Options > More options > Insert

contact, scroll to the desired name, and choose Select.

8. To insert a number, select Options > More options > Insert number. Enter the

number or search for it in contacts, and select OK.

9. To insert a calendar note that has been created, select Options > Insert >

Calendar note.

10. To insert a business card, select Options > Insert > Business card.

11. To delete an image, slide, video clip, or sound clip from the message, select

Options > Delete > Image, Sound clip, Video clip, or Slide.

12. To add a subject to the message, select Options > More options > Edit subject,

enter a subject, and select OK.

13. To view the message or slide presentation before sending it, select Options >

Preview.

14. To save the message to Saved items, select Options > Save message.

15. To send the message, select Send or select Options > Send to e-mail, Send to

album, or Send to many. Send to album is an online network service. Check

with your service provider for more information.

16. Enter the recipient’s number or e-mail address, or search for it in contacts,

and select OK. The message is moved to the Outbox folder for sending.

It takes more time to send a multimedia message than to send a text message.

While the multimedia message is being sent, the animated indicator

Messages

displays and you can use other functions on the device. If there is an interruption

while the message is being sent, the device automatically tries to resend it a few

times. If this fails, the message remains in the Outbox folder and you can try to

manually resend it later. Check your Outbox folder for unsent messages.

Note: When sending messages, your device may display the words

Multimedia message sent. This is an indication that the message has

been sent by your device to the message center number programmed

into your device. This is not an indication that the message has been

received at the intended destination. For more details about messaging

services, check with your service provider.

Messages that you have sent are saved in the Sent items folder if the setting Save

sent messages is set to Yes. See ’Other MMS settings,’ p. 33. This is not an

indication that the message has been received at the intended destination.

Read multimedia messages

When a multimedia message is being received, appears (blinking) in the

display along with the percentage display indicating the sending progress. Once

the message has been fully downloaded, displays and 1 multimedia

message available or %N multimedia messages available displays. %N represents

the number of messages.

• To view the message immediately, select Show; to save the message to the

inbox for later viewing, select Exit; to discard the message, select Discard.

• To view a saved message, select Menu > Messages > Multimedia msgs. >

Inbox and scroll to view the message.

While viewing the message, select Play to view the entire MMS, or select Options

and one of the following:

View text—View only the text included in the message.

Open image, Open sound clip, or Open video clip—View or listen to the

corresponding file.

Delete message—Delete the message you are viewing.

Forward to no., Forward to e-mail, Forward to album (if supported by operator) or

Forward to many—Forward the message to a phone number, to an e-mail address,

or to multiple recipients.

Message details—View the sender’s name and phone number, the message center

used, reception date and time, message size and type.

Messages

While viewing the message, select Play to view the entire MMS, or select Options

> Save image, Save sound clip, or Save video clip to save the file to the Gallery.

Images, sound clips, and video clips must be opened before you can save them.

If blinks and Multimedia me-mory full. View waiting msg.displays, memory

for multimedia messages is full. To view the waiting message, select Show.

Before you can save the message, delete some of your old messages. See ’Delete

messages,’ p. 39.

Reply to multimedia message

Select Reply or Reply to all to enter a reply and send it to the original sender and

any other message recipients.

■Voice messages

If you subscribe to voice mail, your wireless provider will furnish you with a voice

mailbox number. You need to save this number to your device to use voice mail.

When you receive a voice message, your device lets you know by beeping,

displaying a message, or both. If you receive more than one message, your device

shows the number of messages received.

Save voice mailbox number

Your wireless provider may have already saved your voice mailbox number to

your device. Select OK to leave the number unchanged.

1. At the start screen, select Menu > Messages > Voice messages > Voice

mailbox number. The Voice mailbox number displays.

2. If the box is empty, enter the voice mailbox area code and number and select

OK.

Call and setup voice mail

1. Once you have saved the voice mailbox number, press and hold 1.

2. When you connect to voice mail and the prerecorded greeting begins, follow

the automated instructions to setup voice mail.

Messages

Listen to voice messages

Once you have set up voice mail, press and hold 1 or use the Messages menu to

dial the voice mailbox number. Once you connect and the prerecorded greeting

begins, follow the automated instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called dialing codes into phone numbers such

as voice mail, and save the number to a 1-touch dialing location. Dialing codes

instruct the receiving system to pause, wait, bypass, or accept the numbers that

follow them in the dialing string. See ’Setup phone numbers with dialing codes,’

p. 45.

Voice mail services vary by service provider. The following instructions are

examples of common operations. Please check with your service provider for

specific instructions on using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step. Keep in

mind that each voice mail service may vary. However, it should look

something like this:

Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,

press #.

Be precise; you will need this information to Setup phone numbers with dialing

codes, 45.

Clear voice mail icon

To clear the voice mail icon from the display, at the start screen, select Menu >

Messages > Voice messages > Clear voice mail icon.

■Web messaging

Web messaging is a network service. See ’Network Services,’ p. 6.

If your wireless service provider supports this feature, you can use the

Minibrowser to check for e-mail messages. At the start screen, select Menu >

Messages > Minibrowser messages > Connect.

Messages

See ’Mobile internet access,’ p. 91, for more information on using the

Minibrowser in your device to access Web pages.

■Text message folders

Save messages

You can save drafts of messages or received messages to an existing folder or to a

folder that you have created.

1. Open the received message or create a new message, and select Options.

2. To save a received message, select Save > Sent items, Archive, Templates, or a

folder you have created.

3. To save the draft of a message you have created, select Save message > Drafts

or Templates.

View saved messages

1. At the start screen, select Menu > Messages > Text messages.

2. Select the folder containing the message you wish to view:

Inbox—Automatically stores received messages.

Outbox—Stores messages that have not been sent

Sent items—Stores messages that have been sent.

Drafts—Stores messages created as drafts.

Archive—Store messages that you choose to Archive from other folders.

Templates—Stores pictures and prewritten templates. Preloaded templates

can be edited and customized.

My folders—Allows you to organize your messages by creating custom folders

and saving some of your messages here. Select Add folder to add a custom

folder, or Options > Add folder, Rename folder, Delete folder if a folder has

already been created.

3. When the folder opens, scroll to the message you wish to view, and Select.

Messages

■Delete messages

If your message memory is full and you have more messages waiting at the

network, No space for new text messages appears on the start screen. You can do

the following:

• Read some of the unread messages, and delete them individually.

• Delete messages from some of your folders.

Delete a single message

1. At the start screen, select Menu > Messages > Text messages.

2. Select the folder containing the message you wish to delete.

3. Select the message you wish to delete.

4. Select Options > Delete

5. Select OK to delete the message or Back to exit.

Delete all messages in a folder

1. At the start screen, select Menu > Messages > Text messages > Delete

messages.

2. Select the messages you wish to delete:

All—Deletes all messages in all of the folders.

All read—Deletes any messages that have been read in all of the folders.

All unread—Deletes any messages that have not been read in all of the

folders.

3. Select and Mark the folders that have messages you want to delete:

Inbox—Deletes all messages from the Inbox folder.

Sent items—Deletes all messages from the Sent items folder.

Outbox—Deletes all messages from the Outbox folder.

Drafts—Deletes all messages from the Drafts folder.

Archive—Deletes all messages from the Archive folder.

User defined folders—Deletes all messages from the user defined folder.

4. Select Done > Yes to empty the marked folder.

Messages

■Delete folders

Only folders created in My folders can be deleted. The Inbox, Sent items, Archive

and Templates folders are protected. When you delete a folder, all messages in

the folder are also deleted.

Call log

5. Call log

Call log stores information about the last 30 missed, 30 received,

and 30 dialed calls. It also adds the total duration of all calls. When the number

of calls exceeds the maximum, the most recent call replaces the oldest.

Whether viewing missed, received, or dialed calls, the menu options are the

same:

Time of call—Displays the date and time of the call.

Send message—Sends a message to the number.

Use number—Edits the number and associates a name with the number.

Save—Enters a name for the number and saves it to your contacts list.

Add to contact—Adds a number to a contact and saves it in your contacts list.

Delete—Clears the number from memory.

Call—Calls the number.

■View missed calls

The missed calls feature does not function when your device is switched off.

Missed calls are calls that were never answered. To view missed calls:

1. If the message notification displays, select List.

2. When the phone number appears in the display, select Options.

3. Select an option to activate.

1. At the start screen, select Menu > Call log > Missed calls.

2. Scroll to a name or number, and select Options.

3. Select an option to view or activate.

■View received calls

Received calls are calls that have been answered.

1. At the start screen, select Menu > Call log > Received calls.

2. Scroll to a name or number, and select Options.

Call log

3. Select an option to view or activate.

■View dialed numbers

Dialed calls are previous numbers you have dialed from your device:

1. At the start screen, press the call key.

At the start screen, select Menu > Call log > Dialed numbers.

2. Scroll to a name or number, and select Options.

3. Select an option to view or activate.

View call times

You can make or receive calls to or from the same number and view up to five

calls with the time each call occurred. Your device clock must be set for this

feature to work accurately.

1. From the start screen, select Menu > Call log > Missed calls, Received calls, or

Dialed numbers > Options.

2. While viewing a missed or received call, select Options > Time of call.

3. Press the joystick down to view the most recent call times from this number;

select Back to return to the options list.

■Delete call logs

You can delete any missed, dialed, or received calls from device memory.

1. At the start screen, select Menu > Call log > Clear recent call lists.

2. Select the call type you would like to clear: All, Missed, Received or Dialed.

■View duration of calls

Contact your service provider for the actual calls and services invoice, which may

depend on network features, rounding off for billing, taxes and so forth.

Select Menu > Call log > Call timers > Last call duration, Dialed calls' duration,

Received calls' duration, All calls' duration, Life timer, or Clear timers. After

selecting Clear timers, enter your lock code, and select OK. See ’Security settings,’

p. 74.

Call log

Note: All call timers, except the life timer, are reset to zero when Clear

timers is selected.

Note: Some timers, including the life timer, may be reset during service

or software upgrades.

To activate the call timer on the start screen while in a call, select Details > Show

call time on display > On or Off.

■View duration of data and fax calls

Data and fax calls are a network service. See ’Network Services,’ p. 6. If your

wireless service provider supports this feature, you can view the size or duration

of sent or received data and fax calls.

Note: The actual time invoiced for calls and services by your service

provider may vary, depending on network features, rounding off for

billing, taxes, and so forth.

1. At the start screen, select Menu > Call log > Data/fax calls.

2. Scroll to one of the following options:

Last sent data/fax— View the size (KB) of the last sent data/fax call.

Last received data/fax—View the size (KB) of the last received data/fax call.

All sent data/fax—View the size (KB) of all sent data and fax calls.

All received data/fax—View the size (KB) of all received data and fax calls.

Duration of last data/fax call—View the duration time of the last data or

fax call.

Duration of all data/fax calls—View the duration time of all calls.

Clear all data/fax logs—Select OK > Yes to clear all data/fax logs.

■View duration of minibrowser

Minibrowser is a network service. See ’Network Services,’ p. 6. If your wireless

service provider supports this feature, you can view the size or duration of sent or

received data from the Minibrowser.

Note: The actual time invoiced for calls and services by your service

provider may vary, depending on network features, rounding off for

billing, taxes, and so forth.

1. At the start screen, select Menu > Call log > Minibrowser calls.

Call log

2. Scroll to one of the following options:

Last sent browser data—View the size (KB) of the last sent browser data.

Last received browser data—View the size (KB) of the last received data.

All sent browser data—View the size (KB) of all sent browser data.

All received browser data—View the size (KB) of all received browser data.

Last browser session—View the duration time of the last browser session.

All browser sessions—View the duration time of all browser sessions.

Clear all browser logs—Select OK > Yes to clear all browser logs.

Contacts

6. Contacts

The contacts list can hold up to 500 contacts with multiple

numbers and text notes for each contact. The amount of numbers and text

entries that you can save may vary, depending on length and the total number of

entries in the contacts list.

■Add new contacts

You can access the contacts list at the start screen. Press the Right selection key

or, if the Right selection key on your device has a network operator menu, select

Menu > Contacts.

Save contact name and number

1. At the start screen, use the keypad to enter the phone number you wish to

save.

2. Select Options > Save.

3. Enter the name, and select OK.

Save contact number only

1. At the start screen, use the keypad to enter the phone number you wish to

save.

2. Press and hold Options.

Save an entry

1. At the start screen, select Menu >Contacts > Add new.

2. Enter the name, and select OK.

3. Enter the phone number, and select OK > Done.

Setup phone numbers with dialing codes

Dialing codes instruct the receiving system to pause, wait, bypass, or accept the

numbers that follow them in the dialing string.

1. At the start screen, select Menu > Contacts > 1-touch dialing.

Contacts

2. Scroll to an (empty) 1-touch dialing slot and select Assign.

3. Enter your mailbox number, including the area code.

4. Refer to dialing codes and enter any codes as necessary.

For example, if you pause for 5 seconds after connecting to voice mail, enter p

twice (two times 2.5 seconds) after the voice mailbox number:

2145551212pp.

5. Enter any remaining pauses or other information that allows you to listen to

your messages, and select OK.

6. Enter a name (such as Voice Mail), and select OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing

key at the start screen.

Insert dialing codes

Press * repeatedly to cycle through dialing codes. Once the desired code appears

in the display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

* —Bypasses a set of instructions.

p —Pauses for 2.5 seconds before sending any numbers that follow.

+ —Replaces the international access code.

w —Waits for you to press the call key before sending the numbers or codes that

follow.

Save multiple numbers and text items

You can save different types of phone numbers and short text items per name to

the contacts list. The first number you save for any entry is automatically set as

the default, or primary number, but the primary number can always be changed.

1. At the start screen, scroll to the entry to which you wish to add a phone

number or text item.

2. Select Options > Add number or Add detail.

If you selected Add number, select General, Mobile, Home, Work, or Fax.

If you selected Add detail, select E-mail address, Web address, Street address,

or Note.

Contacts

3. Enter the number or text for the type you have selected, and select OK.

4. To change a number type (General, Mobile, Home, Work, or Fax), select

Change type in the options list.

You can also change which phone number is the default (primary) number for the

contact entry.

1. At the start screen, use the joystick to scroll down and select the number you

wish to change, and select Details.

2. Scroll to the number you wish to set as default, and select Options > Set as

default.

Set up voice tags

For information on setting up voice tags and other voice features, see Voice

commands, 71.

Caller groups

You can add contacts list entries to any of five caller groups, and then assign a

unique ringing tone or graphic to that group. This enables you to identify callers

from the group by their unique ringing tone or graphic.

1. Scroll to a name in your contacts list you would like to add to a caller group,

and select Details.

2. Select Options > Caller groups > Family, VIP, Friends, Business, or Other.

3. Select Options to display the following caller group options:

Rename group—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.

Group logo—Turn the graphic for the caller group On or Off, or View the

graphic.

Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9; then dial

those entries by pressing and holding the assigned key. See ’1-touch dialing,’ p.

66, to activate or deactivate 1-touch dialing.

Contacts

Assign a key to 1-touch dialing

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot, and select Assign.

3. Enter the number (including the area code), and select OK; or select Search to

retrieve a number from the contacts list.

4. Enter a name for the number, and select OK.

If 1-touch dialing is off, the device displays a prompt asking if you would like

to turn 1-touch dialing on.

5. Select Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you wish to change, and select Options >

Change.

3. Enter the new number; or select Search to retrieve a number from the

contacts list, and select OK.

4. Enter a name for the entry, and select OK.

Delete 1-touch dialing numbers

1. At the start screen, select Menu > Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing location you wish to delete, and select Options >

Delete > Yes.

■Voice tags

You can dial up to 25 stored numbers using voice dialing.

Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the speaker’s

voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them

in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names

for different numbers.

Contacts

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely upon voice dialing in all

circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. At the start screen, press the joystick down to view the contacts list.

2. Highlight the contact you want to assign a voice tag to. Select Details >

Options > Add voice tag > Start.

3. Speak clearly into the microphone. Do not select Quit unless you want to

cancel the recording. The device automatically stops recording and saves and

replays the voice tag.

. The icon appears next to commands that have voice tags assigned.

If recording is not successful, your device displays Voice system error. Select

Options > Add voice tag, and repeat step 3.

Dial a number

1. Press and hold the Right selection key.

2. When you hear several beeps and Speak now appears, release the key.

3. Pronounce the voice tag clearly into the microphone.

When the device finds the voice tag, Found: appears, and the device

automatically dials the number. If the device does not locate a number or

recognize the voice tag, No match found appears.

Voice tags

After you have associated a voice tag to a contact, you can select Names > Voice

tags Options > Playback, Change, or Delete.

■Edit contacts list entries

1. Scroll through the contacts list to highlight the entry you would like to edit,

and select Details > Options. The list of options varies depending on whether

you are editing a contact listed by phone number or contact name.

2. Some of the following options may be available:

Contacts

Add voice tag—Add a voice tag to the contact.

Edit number/Edit detail—Edit an existing phone number or the details

attached from the contact.

Delete number/Delete detail—Delete a phone number or the details attached

from the contact.

Use number—Edit the number and associate a name with the number.

Available when a contact is selected that is listed with a contact name. Select

Options to use the number.

Change type—Change the number type to General, Mobile, Home, Work, or

Fax or the detail type to E-mail address, Web address, Street address, or Note.

Set as default—Change the default number of the contact.

Add number—Add a number to the contact.

Add detail—Add an address or note to the contact.

Add image—Add a photo to the contact.

Caller groups—Add the contact to an existing caller group.

Custom tone—Set a ringing tone to the contact different than the default.

Send bus. card—Send the contact as a business card to another device.

Send message—Create and send the contact a text message or multimedia

message.

1-touch dialing—Add the contact to your 1-touch dialing list.

Edit name—Edit the name of the contact.

View name—View the name of the contact. Available when a contact is

selected that is listed with a contact name.

Delete—Delete the entire contact entry from your contacts list.

3. Edit the option to your preference, and select OK.

■Delete contacts entries

1. At the start screen, select Menu > Contacts > Delete.

2. To delete individual entries, select One by one.

3. Scroll to the entry you wish to delete, and select Delete > Yes to confirm.

Contacts

4. To delete the entire contents of your contacts list, select Delete all > Yes.

5. Enter the lock code, and select OK. See ’Security settings,’ p. 74.

■View the contacts menu

1. At the start screen, select Menu > Contacts and view the following options:

Search—Find a name or select from a list.

Add new—Add a contact to your contacts list.

Edit name—Edit an existing name.

Delete—Delete a name and its associated numbers.

Add number—Add a number to an existing contact.

Settings—Change the contacts list view or check the memory status of your

device.

1-touch dialing—View or modify the list of 1-touch dialing numbers.

Voice tags—Attach, listen to, or modify a voice tag to a contact in the

contacts list.

My number—View your own phone number.

Caller groups—View and edit the properties of any of the caller groups,

including Family, VIP, Friends, Business, or Other.

2. Select an item to activate the feature or enter its submenu.

Search for a name

1. At the start screen, press the joystick down to display the contents of your

contacts list.

2. Press the key that corresponds to the first letter of the name for which you

are searching.

3. Scroll to select a contact, and select Details to view the details.

Configure settings

You can select how the contacts appear in your contacts list and view the

amount of memory used or available in your device.

Contacts

At the start screen, select Menu > Contacts > Settings >Scrolling view to change

view of name list, or Memory status to view the device memory used and

remaining.

■Send and receive contacts (business cards)

You can send and receive an entry in your contacts list using text messaging, if

supported by your wireless provider.

Send a business card

You can send a business card as a text message to a compatible phone or other

handheld device.

1. Highlight the entry from the contacts list that you wish to send, and select

Details > Options > Send bus. card > Via infrared, Via text message, or Via

multimedia. Primary number or All details options appear only if you have

more than one number or detail saved to the contact entry.

2. Enter the number for your recipient, or select Search to retrieve a number

from your contacts list.

3. Select OK and the business card is sent.

Camera

7. Camera

You can take photos and record video clips with the built-in

camera. The camera lens is on the back of the device. The camera produces

photos in JPEG format and video clips in H.263 (SubQCIF) format.

After you take a picture or video, you can attach it to a multimedia message, send

it with MMS, save it as a wallpaper, save it on a compatible PC using Nokia PC

Suite software, and upload it to a Web address with the content image uploader.

When you attach a picture to an entry in your list of contacts, the picture is

displayed when the contact calls you.

The Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i devices support an

image capture resolution of 640 x 480 pixels. The image resolution in these

materials may appear different.

If there is not enough memory to take a new photo, delete old photos or other

files in the Gallery.

■Take a photo

1. At the start screen, press the joystick up to activate the camera or select

Menu > Camera.

2. Select Capture to take the photo. When taking a photo, a shutter sound is

heard, the photo displays on the screen, and either a blinking icon or scrolling

indicator displays as the photo is saved to the Images folder of Gallery.

To change the camera mode to standard, portrait, night or video, see Change

mode, 54.

3. Select Back to take another photo or Options and choose from one of the

following:

Zoom—Zoom in closer before capturing a photo or get a closer look at the

captured photo; use the joystick to navigate around the photo.

Send—Select Via multimedia or Via infrared to send a photo to a compatible

device or PC.

Attach to contact—Attach photo to contact from contact list.

Rename—Enter or edit the name of the captured photo and select OK.

Open Gallery —Open the Gallery to view saved images, videos, and recordings.

Camera

Set contrast—Use the joystick to adjust the contrast of the captured photo.

Set as wallpaper—Use a captured photo for wallpaper.

Details—View the Name, Size, Created, Format, Resolution, or Copyright of a

captured photo.

Change mode

At the start screen, select Menu > Camera >Options > Change mode or, from the

viewfinder mode, hold and press the right or left joystick position to switch

between the following modes:

Standard photo—Take normal landscape photos.

Portrait photo—Take a smaller icon-sized, vertical photo, which can be added to

an entry in your contacts list.

Night mode—Take a photo when the lighting is dim and the camera needs a

longer exposure time for the photo to be of good quality.

Video—Record a video. See ’Record a video clip,’ p. 55.

Self-timer

At the start screen, select Menu > Camera >Options > Self-timer to set a timer

and delay capturing a photo for 10 seconds. Select Start a beep sounds while the

self-timer runs and beeps faster when the camera is about to capture the photo.

After the timeout, the camera takes the photo and saves the photo in the Images

folder of the Gallery menu.

Settings

At the start screen, select Menu > Camera > Options >Settings to change the

settings in the camera mode. Select one of the following options:

Default mode—Select Standard photo, Portrait photo, Night mode or Video as the

default.

Image quality—Define file compression when saving the image. Select High,

Normal, or Basic. High uses the least file compression and provides the best

image quality but takes more memory.

Video clip length—Select Default or Maximum. The maximum is approximately 15

seconds depending on conditions. Only video clips that are default length or

shorter can be sent in a multimedia message.

Camera

Camera sounds—Select On or Off.

Default title—Select Automatic to use a predefined title or My title to key in or

edit a new title.

Image and video storage—Select the folder for image storage.

Other options

Zoom—Zoom in closer to your image before capturing a photo or get a closer look

at the captured photo. Use the joystick to navigate around the photo.

Flash on or Flash off—Select to capture a photo with or without the flash.

View previous—View the previously captured photo.

Open Gallery—Open the Images folder of the Gallery menu.

Record a video clip

1. From the start screen, select Menu > Camera > Options > Change mode >

Video > Record. While you are recording, the recording indicator and the

remaining recording time display.

2. Select Pause to pause the recording, Continue to resume the recording, or

Stop to stop the recording. The device saves the recording in the Video clip

folder of the Gallery menu.

3. Select Back to record another video or select Options and one of the

following:

Delete—Delete the video clip.

Send—Send the video clip to another device as a multimedia message or by

using IR connectivity.

Rename—Rename the video clip.

Open Gallery—Go to the Video clip folder of the Gallery menu.

Mute audio or Unmute audio—Turn the sound on or off.

Set contrast—Increase or decrease contrast of the selected video using the

joystick.

Details—View details of the selected video, such as name, size, time and date

created, length, file format, and copyright information.

Gallery

8. Gallery

You can save pictures, video clips, recordings, and ringing tones to

folders in the gallery and add new folders to the ones already there. Images and

tones can be downloaded using MMS, SMS, mobile Internet sites, or Nokia PC

Suite.

Note: Only compatible devices that offer compatible multimedia

message features can receive and display multimedia messages.

Your device supports a digital rights management system to protect content that

you have acquired. Content such as a ringing tone, can be protected and

associated with certain usage rules, for example, the number of usage times or a

certain usage period. Usage rules are defined in the content activation key that

can be delivered with the content or delivered separately, depending on the

service provider. You may be able to update the activation key. Always check the

delivery terms of any content and activation key before acquiring them, as they

may be subject to a fee.

from being copied, modified, transferred, or forwarded.

Your device has about 10 MB of memory for storing files in the gallery. This

memory is not shared with other functions, such as contacts. If the device

displays a message that the memory is full, delete some existing files before

proceeding.

■Folders

1. At the start screen, select Menu > Gallery > Images, Video clips, Music files,

Graphics, Tones, or Recordings folder.

2. Select Open to view a list of the files in the folder or select Options to access

the following:

Delete folder —Delete a folder you have created. You cannot delete a preset

folder.

Move—Move the selected folder into another folder. After selecting Move,

scroll to another folder, and select Options > Move. You cannot move a preset

folder.

Gallery

Rename folder—Rename a folder you have created. You cannot rename a

preset folder.

Details—Show the name, size, and date of creation of the selected folder.

Type of view—Select List or Grid to determine how the folders and the files

within folders are displayed.

Sort—Sort the contents of the selected folder by name, date, format, or size.

Add folder—Create a new folder.

Memory status—Check the available memory for the device handset.

Activation key list—View the list of available activation keys. You can delete

activation keys if desired.

Media

9. Media

■Media player

With the media player you can download, view, and play compatible images,

audio and video files, and animated images from a variety of sources.

The media player allows you to play streaming videos and streaming audio from a

network server. Streaming functionality is a network service and requires

network support. Check the availability of these services, pricing, and tariffs with

your network operator or the service provider whose service you wish to use.

Service providers will also give you instructions on how to use their services.

From the start screen, select Menu > Media > Media player and one of the

following:

Online media—Connect to the operator’s network. This is a network service.

Check with your service provider for pricing and information.

Open Gallery—Open the Gallery. From Gallery, you can play stored audio and

video files. See ’Gallery,’ p. 56.

Go to address—Enter the address of a mobile Internet service, and select OK.

■Radio

Your phone has an FM radio that also functions as an alarm clock radio. To listen

to the FM radio on your phone, connect a compatible music stand or stereo

headset to the connector on the bottom of the phone. The FM radio uses the wire

of the headset as an antenna. A compatible headset needs to be attached to the

device for the FM radio to function properly.The quality of a radio broadcast

depends on coverage of the radio station in that particular area.

Warning: Listen to music at a moderate level. Continuous exposure to

high volume may damage your hearing.

Turn the radio on and off

1. Connect the phone to a compatible headset or music stand.

2. From the start screen, select Menu > Media > Radio.

3. To turn off the radio, press and hold the end key.

Media

Use the radio

With the radio on, select Options and one of the following:

Turn off—Turn off the radio.

Save channel—Save the current station to one of 20 locations.

Automatic tuning—Press the joystick up or down to start the channel search.

Select OK when a channel is found.

Manual tuning—Press the joystick up or down to search in increments of 0.05

MHz.

Set frequency—Manually enter the frequency of a known radio station.

Delete channel—Delete a saved channel.

Rename—Rename a saved channel and select OK.

Loudspeaker/Headset—Listen to the radio through the speakerphone or through

the headset.

Mono output/Stereo output—Listen to the radio in monaural mode (default) or in

stereo. Stereo output is available through a stereo enhancement.

To set the radio frequency, press * and use the keypad to enter the frequency of a

known radio station. To tune the radio manually, press #; then press the joystick

up or down to search in increments of 0.05 MHz.

To adjust the radio volume, press the Volume up and Volume down keys.

When an application using a browser connection is sending or receiving data, it

may interfere with the radio.

When you place or receive a call, the radio automatically mutes. Once the call is

ended, the radio switches back on.

Save a radio channel

You can save a preset station to any one of 20 locations in memory, and then

tune to that station by using the joystick with the radio on.

1. With the radio on, press and hold the joystick up or down to start the channel

search. Searching stops when a channel is found.

2. To save the channel, select Options > Save channel.

3. Enter a name for the channel, and select OK.

4. Select an (empty) location to save the channel.

Media

To save an FM station quickly to 1–9 memory locations, press and hold the

corresponding number key while the radio is playing. Then, enter the name of the

channel, and select OK.

■Voice recorder

This feature allows you to record pieces of speech or sound with your device and

listen to them later. The total available time is 3 minutes if no memos have been

stored. The maximum length of a recording depends on how much memory

remains available.

From the start screen, select Menu > Media >Voice recorder > Record to start the

recording, Select memory to define a storage folder, or Recordings list to manage

the folder you have defined for recording storage. Save recordings to the

Recordings folder or to another folder in the Gallery.

Record speech or sound

1. At the start screen, select Menu > Media > Voice recorder > Record.

2. After the recorder start tone is heard, begin recording speech or sound.

3. When you are finished recording, select Stop and your recording is saved to

the Recordings folder in the Gallery.

4. Select Recordings list, open the Recordings folder in the Gallery and scroll to

the recording you created. Select Options to OK.

Options

After you have saved the recording to the Recordings folder, highlight the

recording, and select Play to listen to the recording using the earpiece, or Options

to:

Delete—Erase the recording.

Rename—Change the name of the recording.

Set as ring tone—Use your recording as a ringtone.

■Media equalizer

The equalizer enhances the sound quality when using the music player by

amplifying or attenuating frequency bands. There are five preset equalizer

settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.

Media

Activate an equalizer set

From the start screen, select Menu > Media > Media equalizer, scroll to the

desired setting, and select Activate.

Create a custom equalizer set

1. From the start screen, select Menu > Media > Media equalizer.

2. Scroll to Set 1 or Set 2, and select Options > Edit.

The selected set appears in the display with the bar

on the far left highlighted.The bars adjust

frequencies, from the lowest (the leftmost bar) to the

highest (the rightmost bar). The higher the indicator

on a particular bar, the more that frequency is

amplified.

3. To adjust the lowest frequency, use the joystick to move the indicator up and

down on the bar.

4. To adjust other frequencies, use the joystick to move left or right to the other

bars.

5. Repeat steps 3 and 4 to adjust the setting for each frequency.

6. When you are finished, select Save.

7. To rename the setting, select Options > Rename, enter a new name, and

select OK.

8. To activate the setting, select Activate.

Settings

10. Settings

Use this menu to change profiles, tone settings, time and date

settings, call settings, phone settings, voice commands, enhancement settings,

security settings, application settings, network settings, network services, and

restore factory settings.

■Profiles

Profiles define how your device reacts when you receive a call or message, how

your keypad sounds when you press a key, and more. Ringing options, keypad

tones, and other settings for each of the available profiles can be left at their

default setting, or customized to suit your needs. The following profiles are

available: Normal, Silent, Meeting, Outdoor, and Pager.

Profiles are also available for enhancements such as headset and car kit. See

’Enhancements,’ p. 98.

1. At the start screen, select Menu >Settings > Profiles.

2. Select the profile of your choice and Activate.

Customize a profile

You can customize any of the profiles a variety of ways.

1. At the start screen, select Menu >Settings > Profiles.

2. Select the profile you wish to customize.

3. Select Customize.

4. Select the option you want to customize: Incoming call alert, Ringing tone,

Ringing volume, Vibrating alert, Message alert tone, Keypad tones, Warning

tones, Alert for, or Profile name. You cannot rename the Normal profile

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you

attend an event that requires your device be set to Silent before the event starts,

but you forget to return it to Normal until long after the event. A timed profile

can prevent missed calls by returning your device to the default profile at a time

you specify. Timed profiles can be set up to 24 hours in advance.

Settings

1. At the start screen, select Menu >Settings > Profiles.

2. Select the profile you wish to activate and select Timed for timed expiration.

3. Enter the time in mm:ss for the profile to expire, and select OK.

■Display settings

Wallpaper

You can set your device to display a background picture (wallpaper) on the start

screen.

1. At the start screen, select Menu >Settings > Display settings > Wallpaper >

Select wallpaper > Graphics > Open.

2. Browse the Graphics folder.

3. When you arrive at the image of your choice, select Options > Set as

wallpaper.

4. To activate/deactivate wallpaper, at the start screen, select Menu >Settings >

Display settings > Wallpaper > On or Off.

Color schemes

You can change the color of some display components in your device, such as

indicators and signal bars.

1. At the start screen, select Menu >Settings > Display settings > Color schemes.

2. Select the color scheme of your choice.

Menu view

You can change the view of the main menu. The grid view shows menu icons only

in grid format, and the list view shows the icon and menu name in menu order.

At the start screen, select Menu >Settings > Display settings > Menu view > List

or Grid.

Backlight

You can choose whether the backlights will be always on, off, or on for a selected

time.

Settings

At the start screen, select Menu >Settings > Display settings > Backlight time-

out > 15 seconds or Customize.

■Screen saver

From the start screen, select Menu >Settings > Display settings >Screen saver >

On, Off, Select s. saver, or Time-out (10 seconds, 30 seconds, or Other).

■Tone settings

You can adjust the ringing volume, keypad tones, and more for the active profile.

See ’Customize a profile,’ p. 62, for more information on profile settings.

Select Menu > Settings > Tone settings and one of the following:

Incoming call alert—Select how the device notifies you of an incoming call.

Ringing tone—Select the ringing tone for incoming calls.

Ringing volume—Set the volume of your ringing tone.

Vibrating alert—Turn the vibrating alert On or Off.

Message alert tone—Select the tone for received messages.

Keypad tones—Set the volume of your keypad tones (or turn them off).

Warning tones—Turn warning and confirmation tones On or Off.

Alert for—Define which caller groups the selected profile will accept or decline.

See ’Caller groups,’ p. 47.

■Time and date settings

Clock

At the start screen, select Menu >Settings > Time and date settings > Clock >

Show clock or Hide clock, Set the time, Time zone or Time format.

Date

At the start screen, select Menu >Settings > Time and date settings > Date >

Show date or Hide date, Set the date, Date format, or Date separator.

Settings

Set the auto-update of date and time

Auto-update is a network service. See ’Network Services,’ p. 6. If your wireless

service provider supports this feature, you can allow the digital network to set

the clock, which is useful when you are out of your home area, for instance when

you have traveled to another network or time zone.

At the start screen, select Menu >Settings > Time and date settings > Auto-

update of date & time > On, Confirm first, or Off.

If you use the Auto-update of date & time option while outside your digital

network, you may be prompted to enter the time manually. Network time will

replace the time and date when you re-enter your digital network.

If your battery has been removed or has discharged outside the digital network,

you may be prompted to enter the time manually (once the battery is replaced or

recharged, and you are still outside of the digital network).

■Call settings

Location info sharing

Location info sharing is only available for the Nokia 6235i device. Location info

sharing is a network service. See ’Network Services,’ p. 6.

If your wireless service provider supports this feature, then location info sharing

allows the device to share position information over the network. For calls to

emergency numbers, this position information may be used by the emergency

operator to determine the position of the device. The functionality and accuracy

of this feature are dependent on the network, satellite systems, and the agency

receiving the information. This feature may not function in all areas or at all

times.

At the start screen, select Menu >Settings > Call settings > Location info sharing

> Emergency or On > OK or No.

Emergency—This is the default profile. The device location information is shared

only during an emergency call to the official emergency number programmed

into your device. The screen displays in the upper left hand corner of the

start screen.

On—The device location information is shared with the network whenever the

device is powered on and activated. The screen displays in the upper left

hand corner of the start screen.

Settings

Note: Location information will always be shared with the network

during emergency calls to the official emergency number programmed

into the device, regardless of which setting is selected. After placing an

emergency call the device remains in emergency mode for five minutes.

During this time, the location information will be shared with the

network. See ’Emergency calls,’ p. 104.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key

except the Power key, Right selection key, or end key.

At the start screen, select Menu >Settings > Call settings > Anykey answer >On

or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy

signal when you dial. With automatic redial activated, your device redials the

number (number of times is specified by the network), and notifies you once the

network is available.

At the start screen, select Menu >Settings > Call settings > Automatic redial >

On or Off.

1-touch dialing

You can activate or deactivate 1-touch dialing. At the start screen, select Menu

>Settings > Call settings > 1-touch dialing > On or Off. See ’Set up 1-touch

dialing,’ p. 47.

Automatic update of service

Your device is capable of receiving updates to wireless services sent to your

device by your service provider. At the start screen, select Menu >Settings > Call

settings > Automatic update of service > On or Off.

Calling card

If you use a calling card for long distance calls, you can save the calling card

numbers in your device. Your device can store up to four calling cards. Contact

your calling card company for more information.

Settings

Save information

1. At the start screen, select Menu >Settings > Call settings > Calling card.

2. Enter your lock code, and select OK. See ’Change lock code

,’ p. 75.

3. Scroll to one of the four card memory locations, and select Options > Edit >

OK > Dialing sequence.

4. Select one of the following sequence types:

Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number,

then card number (+ PIN, if required).

Access no.+ card no.+ phone no.—Dial 1-800 access number, card number (+

PIN, if required), then phone number.

Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the

phone number) and phone number you want to dial, then card number

(+ PIN, if required).

5. Enter the required information (access number or prefix and card number),

and select OK to confirm your entries.

6. Select Card name, enter the card name, and select OK.

Make calls

After you have saved your calling card information in your device, you can make a

call using your calling card.

1. At the start screen, select Menu >Settings > Call settings > Calling card.

2. Enter your lock code, and select OK. See ’Change lock code

,’ p. 75.

3. Scroll to the calling card of your choice, select Options > Select > OK.

4. Press the end key to return to the start screen; then enter the phone number,

including any prefix (such as 0 or 1) that your calling card may require when

you make a calling card call. See your calling card for instructions

5. Press and hold the call key for a few seconds until Card call is displayed.

6. When you hear the tone or system message, select OK.

Settings

International prefix

You can store an international dialing prefix into your device. When you enter +

at the beginning of a phone number, your device automatically inserts the

international dialing prefix that you have stored after you press the call key. See

’Insert dialing codes,’ p. 46.

Data or fax calls

Data or fax calling is a network service. See ’Network Services,’ p. 6. If your

wireless service provider supports this feature, you can set up the device to send

or receive data or fax calls when a terminal, such as a PDA or PC, is connected.

For better performance during data calls, place the device on a stationary surface

with the keypad facing downward. Do not move the device by holding it in your

hand during a data call.

For more information on connectivity, refer to the PC/PDA Connectivity Guide

which can be downloaded from the Nokia website at http://www.nokiausa.com.

1. At the start screen, select Menu >Settings > Call settings > Data/fax calls >

Incoming data/fax call.

2. Select one of the following options:

Normal—The device receives incoming calls as usual.

Data calls only—The device receives only data calls.

Fax calls only—The device receives only fax calls.

3. When you are finished receiving the fax or data call, repeat steps 1 and 2 and

select Normal.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.

At the start screen, select Menu >Settings > Call settings > Data/fax calls > Data

rate display > Graphic or Off.

Call summary

Your device can display the time spent on a call when you hang up. At the start

screen, select Menu >Settings > Call settings > Call summary > On or Off.

Settings

Ringing tone for no caller ID

You can select a different ringing tone for calls received with no caller ID.

From the start screen, select Menu >Settings > Call settings > Ringing tone for no

caller ID > On or Off. See ’Customize a profile,’ p. 62, for more information on

selecting a ringing tone.

■Phone settings

Phone language

1. At the start screen, select Menu >Settings > Phone settings > Phone

language.

2. Scroll to the language of your choice and press Select.

The phone language affects the time and date formats of the clock, alarm clock,

and calendar.

Touch tones

Touch tones, or DTMF tones, are the tones that sound when you press the keys on

your device keypad. You can use touch tones for many automated dial-up

services such as banking and airlines, or for entering your voice mailbox number

and password.

Touch tones are sent during an active call. You can send them manually from

your device keypad, or send them automatically by saving them in your device.

Set type

1. At the start screen, select Menu >Settings > Phone settings > Touch tones >

Manual touch tones.

2. Select one of the following options:

Continuous—The tone sounds for as long as you press and hold a key.

Fixed—Used to send tones of the duration you specify in the Touch tone

length option.

Off—Used to turn off tones. No tones are sent when you press a key.

Settings

Set length

You can specify touch-tone length for the Fixed option. At the start screen, select

Menu >Settings > Phone settings > Touch tones > Touch tone length > Short (0.1

seconds) or Long (0.5 seconds).

Memory status

You can view the size of memory available on your device. At the start screen,

select Menu > Settings > Phone settings > Memory status > Size, Free memory,

Used memory, Contacts, Gallery, Organizer, or Multimedia msgs..

You can view the size of memory available for application installations. At the

start screen, select Menu > Extras > Memory.

Start-up tone

You can select to have a start-up tone when you first turn on your device. At the

start screen, select Menu >Settings > Phone settings > Start-up tone > On or Off.

Create a welcome note

You can write a welcome note which briefly appears on the display screen

whenever you switch your device on. Dictionary mode is not available for

entering welcome note text.

1. At the start screen, select Menu > Settings > Phone settings > Welcome note.

2. Enter a note (up to 44 characters). Select Delete if you want to delete the

previous text.

3. When you are finished, select Options > Save.

Create a banner

If your wireless service provider supports this feature, you can choose whether

the display shows the operator logo or customized text when the device is in the

idle state. At the start screen, select Menu >Settings > Phone settings >Banner>

Default or Customize.

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 10 seconds and wait for the help text to display.

If necessary, use the joystick to page through the full help text.

Settings

The default setting for help text is On. However, you can turn help text on or off.

At the start screen, select Menu >Settings > Phone settings > Help text

activation > On or Off.

■Infrared activation

If supported by your wireless provider, you can send and receive contacts

(business card) as a text message to a compatible phone or other handheld device

using the infrared port. See ’Infrared,’ p. 79.

Send a business card

1. At the start screen, select Menu >Settings > Infrared.

2. Highlight the entry from the contacts list that you wish to send.

3. Select Details > Options > Send bus. card > Via infrared > Primary number to

send primary number only or All details to send all contact information for

the contact.

4. Align the IR port to the other activated device IR port. Select OK and your

device will start sending the business card with IR.

Receive a business card

1. At the start screen, select Menu >Settings > Infrared > Select. Infrared

reception activated displays.

2. Align the IR port with the activated device port that is sending the business

card.

3. Select Show > Save to save the business card in phone book memory, or

select Exit > OK to discard the business card.

■Voice commands

You can dial up to 25 stored numbers using voice command dialing. See ’Voice

tags,’ p. 48.

Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the speaker’s

voice.

• You must say the name exactly as you said it when you recorded it.

Settings

• Voice tags are sensitive to background noise. Record voice tags and use them

in a quiet environment.

• Very short names are not accepted. Use long names and avoid similar names

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely upon voice dialing in all

circumstances.

Handsfree operation with voice commands

You can set as many as five voice commands, which allow handsfree operation of

certain features in your device.

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device

function.

1. At the start screen, select Menu > Settings > Voice commands.

2. Select the device function you wish to tag: Profiles, Voice mailbox, Radio,

Infrared, Voice recorder or Call log > Add.

3. Select Start, and speak the voice tag clearly into the microphone. Do not

select Quit unless you want to cancel the recording

The device replays and saves the recorded tag. The icon appears next to

commands that have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a function in your device, you can

issue a command by speaking the voice tag.

1. From the start screen, press and hold the Right selection key.

2. When Speak now displays, pronounce the voice tag clearly into the

microphone.

Select Playback to listen to the voice command tag.

When the device finds the voice tag, Found: displays, and the device plays the

recognized voice tag through the earpiece. The function you requested is

activated.

Settings

Options

After you have associated a voice tag to a command, you can select one of the

following options:

Change—Change the voice command.

Delete—Erase the voice command tag.

■Enhancement settings

The enhancement settings menu is shown only if the device has been connected

to a compatible enhancement. At the start screen, select Menu > Settings >

Enhancement settings > Headset, Handsfree, Loopset, TTY/TDD, or Charger.

Headset

Important: The headset may affect your ability to hear sounds around

you. Do not use the headset in situations that may endanger your safety.

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

a headset is connected.

Automatic answer—Calls are answered automatically after one ring when a

headset is connected. Select On or Off.

Handsfree

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

your device is connected to a car kit.

Automatic answer—Answer calls automatically after one ring when a car kit is

connected. Select On or Off.

Lights—Choose to keep the device lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

Loopset

The LPS-4 Loopset is recommended for use with your device. Select the option of

your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

your device is connected to a loopset.

Settings

Automatic answer—Answer calls automatically after one ring when a loopset is

connected. Select On or Off.

TTY/TDD

Check with the manufacturer of the TTY/TDD device for a connecting cable that is

compatible with the Nokia device. TTY/TDD communications depend on network

availability. Check with your service provider for availability and description of

services.

Charger

Select the option of your choice to enter the submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when

your device is connected to the charger.

Lights—Choose to keep the device lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

■Security settings

Activate or deactivate phone lock

The phone lock feature protects your device from unauthorized outgoing calls or

unauthorized access to information stored in the device. To activate or

deactivate the phone lock setting on your device:

1. At the start screen, select Menu > Settings > Security settings.

2. Enter the lock code, and select OK. See ’Change lock code,’ p. 75.

3. Select Phone lock and one of the following options:

Off—Immediately turns off the device lock feature.

Lock now—Immediately turns on the device lock feature.

On power-up—Turns on the device lock feature the next time you turn the

device on.

If you selected Lock now, you will be prompted to enter your lock code when you

press Menu, the right softkey, or the left softkey. When the lock code has been

entered, phone lock deactivates and your device functions normally.

When phone lock is activated, Phone locked is displayed each time you turn your

device on or off.

Settings

When the device is locked, calls still may be possible to the official emergency

number programmed into your device.

Call not allowed is displayed if you attempt to place a call while your device is

locked. To answer a call with phone lock on, select Answer or press the call key

Allow numbers when phone locked

When phone lock is on, the only outgoing calls that can be made are to the

emergency number programmed into your device (for example, 911) or the

number stored in the Allowed no. when phone locked location:

1. At the start screen, select Menu > Settings > Security settings.

2. Enter the lock code, and select OK. See ’Change lock code,’ p. 75.

3. Select Allowed no. when phone locked. Highlight an empty folder and select

Assign and enter the phone number; or select Assign > Search to recall the

number from Contacts. Select OK.

Call the allowed phone number

1. At the start screen, press the joystick down and highlight the contact you

wish to call.

2. Press the call key to place the call.

Change lock code

Avoid using codes similar to emergency numbers such as 911 to prevent

accidental dialing of the emergency number.

The preset lock code is 1234 or the last four digits of your phone number. If you

enter an incorrect lock code five times in a row, your device will prompt you for

the lock code.

If you enter the wrong lock code 5 times in succession, you will not be able to

enter a code for 5 minutes, even if you power off the device between incorrect

entries.

1. At the start screen, select Menu > Settings > Security settings > Change lock

code.

2. Enter the new lock code (must be 4 characters in length), re-enter the new

lock code for verification, and select OK.

3. Reenter the new lock code for verification, and select OK.

Settings

When you change your lock code, make sure you store it in a safe place, away

from your device. Avoid entering access codes similar to emergency numbers to

prevent accidental emergency calls.

Call restrictions

Call restrictions is a network service. See ’Network Services,’ p. 6.

If your wireless service provider supports this feature, you can restrict the calls

your device makes and receives. When calls are restricted, calls still may be

possible to the official emergency number programmed into your device. Contact

your service provider for the restriction password.

1. At the start screen, select Menu > Settings > Security settings > Call

restrictions.

2. Enter the lock code, and select OK. See ’Change lock code,’ p. 75.

3. Select the types of calls you wish to restrict:

Restrict outgoing calls - Calls cannot be made.

Restrict incoming calls - Calls cannot be received.

4. Select an option: Select, Add restriction.

Note: When calls are restricted, calls still may be possible to the official

emergency number programmed into your device.

Voice privacy

Voice privacy is a network service. See ’Network Services,’ p. 6. If your wireless

service provider supports this feature, the voice privacy feature protects the

privacy of your current phone conversation from other callers placing phone calls

on your same network. At the start screen, select Menu > Settings > Security

settings > Voice privacy > On or Off.

■Network

The menu options you see in your device are based on your service provider’s

network. The network determines which options actually appear in the device

menu. Check with your service provider for more information.

The Network menu allows you to customize the way your device chooses a

network in which to operate while you are within or outside of your primary or

home system. Your device is set to search for the most cost-effective network. If

Settings

your device cannot find a preferred network, it selects a network automatically

based on the option you choose in the Network menu.

Roaming options

You can set your device to roam or search for another network when you are not

in your home area.

1. At the start screen, select Menu > Settings > Network > Roaming options.

2. Select one of the following options:

Home only—You can make and receive calls in your home area only.

Automatic—The device automatically searches for service in another digital

network. If one is not found, the device uses analog service. The roaming rate

applies when not in the home service area.

3. Select OK, if necessary, to confirm the activation.

Mode

You can choose whether your device uses digital or analog service.

1. At the start screen, select Menu > Settings > Network > Mode.

2. Select one of the following service options:

Digital preferred—The device works in digital mode but will also work in

analog mode when digital mode is unavailable.

Digital only—The device only works in digital mode.

Analog only—The device only works in analog mode.

■Network services

The following features are network services. See ’Network Services,’ p. 6.

Store a feature code

1. At the start screen, select Menu > Settings > Network services > Network

feature setting.

2. Enter the feature code from your service provider (for example, *633), and

select OK.

Settings

3. Select the type of service that matches the feature code you entered (for

example, Call forwarding).

The activated feature code is now stored in your device, and you are returned

to the Feature code: field. Continue entering other feature codes (for

example, *633), or press the end key to return to the start screen. Once you

enter a network feature code successfully the feature becomes visible in the

Network services menu.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number.

Call forwarding is a network service and may not work the same in all networks,

so contact your wireless provider for availability.

Activate

All options listed may not appear in the display. Contact your wireless provider

for more information.

1. At the start screen, select Menu > Settings > Network services > Call

forwarding.

2. Select one of the following options:

Forward all calls—Forward all calls to the number you specify.

Forward if busy—Forward incoming calls when you are in a call.

Forward if not answered—Forward incoming calls to another number if you

are unable to answer. You can set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your device is off.

Cancel all call forwarding—Cancel any call forwarding options you have set.

3. Select Activate.

4. Select the destination to which your calls will be forwarded.

5. Enter the number to which your calls, data, or other information will be

forwarded, and select OK.

Cancel

At the start screen, select Menu > Settings > Network services > Call forwarding

> Cancel all call forwarding. Cancel all call forwarding may affect your ability to

receive voice mail messages. Contact your wireless provider for specific details.

Settings

Call waiting

If your wireless provider supports this feature, call waiting notifies you of an

incoming call even while you are in a call. You can then accept, reject, or ignore

the incoming call.

1. At the start screen, select Menu > Settings > Network services > Call waiting

> Activate or Cancel.

2. During a call, select Answer or press the call key to answer the waiting call.

The first call is put on hold.

3. Press the end key to end the active call.

Send own caller ID when calling

If your wireless service provider supports this feature, then you can allow or

prevent your number from appearing on the receiving caller ID.

At the start screen, select Menu > Settings > Network services > Send my caller

ID >Yes or No.

View your own phone number

At the start screen, select Menu > Settings > Network services > My number

selection.

■Restore factory settings

You can reset some of the menu settings to their original values. Data that you

have entered or downloaded is not deleted, for example, entries in your contacts

list are not affected.

1. At the start screen, select Menu > Settings > Restore factory settings.

2. Enter the lock code, and select OK. See ’Security settings,’ p. 74.

■Infrared

You can set up the device to receive data through its IR port. To use an IR

connection, transmission and reception must be to or from an IR compatible

phone or device. You can send or receive data such as business cards, graphics,

images, sound clips, music files, videos, and calendar notes to or from a

compatible phone or data device (such as a computer) using the IR port of your

device.

Settings

Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with

other IR devices. This device is a Class 1 laser product.

Send and receive data

1. Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices.

The preferable distance between the two devices in an IR connection is from

3 inches to 3 feet.

2. Activate IR in your device by selecting Menu > Settings > Infrared.

3. The user of the other device should activate IR as well.

If data transfer is not started within two minutes after the activation of the IR

port, the connection is cancelled and must be restarted.

Connection indicator

• When shows continuously, the IR connection is activated and your

device is ready to send or receive data using its IR port.

• When blinks, your device is either trying to connect to the other device

or a connection has been lost.

Organizer

11. Orga n i z e r

Your device contains features to help organize your everyday life,

including an alarm clock, calendar, calculator, countdown timer, and stopwatch.

■Alarm clock

If the alarm time is reached while the device is switched off, the device switches

itself on and starts sounding the alarm tone. If you select Stop, the device asks

whether you want to activate the device for calls. Select No to switch off the

device or Yes to make and receive calls. Do not select Yes when wireless phone

use may cause interference or danger.

Set or change an alarm setting

The alarm clock is based on the device clock. It sounds an alert any time you

specify and even works if the device is turned off.

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm time >

On.

2. Enter the time for the alarm in hh:mm format, and select OK.

3. Select am or pm (if 12-hour format is selected). Alarm on appears briefly in

the display and appears on the start screen.

Repeat alarm

You can set the alarm to repeat. At the start screen, select Menu > Organizer >

Alarm clock > Repeat alarm.

Set the alarm tone

You can set which tone is played when the alarm sounds.

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm tone.

2. Select Standard, Radio, Ringing tone, Open Gallery or Tone downloads to

choose the tone you want to use.

If you set your alarm to Radio, use an accessory that supports FM Stereo.

Organizer

Alarm conditions

When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for

currently active profile), and the display lights up.

With the device on, select OK to shut the alarm off, or select Snooze. The alarm

stops for 10 minutes and Snooze on appears in the display.

If you do not press a key, the alarms stops (snoozes) for 10 minutes, then sounds

again.

If the alarm time is reached while the device is switched off, the device switches

itself on and starts sounding the alarm tone. If you select Stop, the device asks

whether you want to activate the device for calls. Select No to switch off the

device or Yes to make and receive calls. Do not select Yes when wireless device

use may cause interference or danger.

Turn an alarm off

At the start screen, select Menu > Organizer > Alarm clock > Alarm time > Off.

■Calendar

The calendar keeps track of reminders, calls you need to make, meetings, and

birthdays. It can even sound an alarm for any of these events.

Monthly view provides an overview of the selected month and weeks. It also

allows you to jump to a specific date. Any days or dates that appear in bold font

contain calendar notes such as a meeting or reminder.

Open

At the start screen, select Menu > Organizer > Calendar. You can move the cursor

in some calendar views by using the joystick.

Go to a date

1. At the start screen, select Menu > Organizer > Calendar > Options > Go to

date.

2. Enter the date (for example, mm/dd/yyyy), and select OK.

Organizer

Note a specific date

You can apply five types of notes to your calendar. Your device asks for further

information depending on which note you choose. You also have the option to

set an alarm for any note that you select.

1. Go to the date for which you want to set a reminder. See ’Go to a date,’ p. 82.

2. From the monthly view (with the go-to date highlighted), select Options >

Make a note.

3. Select one of the following note types and proceed accordingly:

Meeting—Enter a subject, location, and a start/end time.

Call—Enter a phone number, a name and the time.

Birthday—Enter the person’s name and year of birth.

Memo—Enter a subject and an end date.

Reminder—Enter the subject you wish to be reminded about. You are given

the option to set an alarm.

4. Enter your note and select Options > Save.

View notes (day view)

After you have created calendar notes, you can view them.

1. At the start screen, select Menu > Organizer > Calendar.

2. Scroll to the date containing the note, that appears in bold type and select

View.

Options while viewing a list of notes

1. Select Options while viewing a day’s note to display the following:

The options listed below are available either while viewing the body of a note

or viewing the header of a note.

Make a note—Create a new note for the selected date.

Delete—Delete the note.

Edit—Edit the note.

Move—Move the note to another date on your calendar.

Organizer

Repeat—Set the note to recur on a regular basis (daily, weekly, biweekly,

monthly, and yearly).

Go to date—Jump to another date on your calendar.

Send note—Send the note to another device as a text message or in calendar-

to-calendar (vCal) format by way of multimedia messages, SMS, or IR.

Copy—Copy the note, which you can then paste to another date.

Settings—Set the date and time, date and time format, the day each week

starts and whether you want your notes to auto-delete after a specified time.

Go to to-do list—Jump to the to-do list on your calendar.

2. Select an option to activate it or enter its submenu.

Send a note

1. At the start screen, select Menu > Organizer > Calendar.

2. Scroll to the date containing the note you wish to send, which appears in bold

type, and select View.

3. Scroll to the note you wish to send, and select Options > Send note > Via

calendar, Via multimedia (see Multimedia messages, 31), Via text message, or

Via infrared (see Infrared activation, 71).

4. If you selected Via calendar, enter the number for the recipient, or select

Search to retrieve a number from the contacts list, and select OK.

5. If you selected Via text message, the note appears as a text message in the

display.

• Select Send > Send to number, Send to e-mail, Send to many or Send to

distrib. list. Highlight the contact you wish to send your note to and select

Send.

• Enter the number for the recipient, or select Search to retrieve a number

from the contacts list, and select Send.

Receive notes

When you receive a calendar note in calendar-to-calendar (vCal) format, your

device displays Calendar note received.

• To view calendar notes, select Show and, if necessary, scroll to view the entire

message.

Organizer

• To save calendar notes after viewing, select Options > Save.

• To discard calendar notes after viewing, select Options > Discard or select

Exit.

When you receive a calendar note or text message, a message notification

appears on the start screen. You can save the note in your calendar and set an

alarm for any date and time.

■Notes

You can write and save information in Notes, and send notes via multimedia, text

message, or infrared. From the start screen, select Menu > Organizer > Notes. If

there are no notes created, select Add note, create your note and select Save

when done. If notes have already been created, highlight the note you wish to use

and select View to read, or select Options to perform one of the following:

Make a note—Create additional notes.

Delete—Discard a note.

Edit—Change or add information to a note.

Send note—Send a note Via multimedia, Via text message, or Via infrared.

Delete all notes—Delete all notes created.

■To-do list

Use the to-do list feature to keep track of your tasks. You can save a note for a

task, select a priority level for the note and mark it as done when you have

completed it. You can sort the notes by priority or by date.

Add a To-do note

1. From the start screen, select Menu > Organizer > To-do list.

2. If there are no notes, select Add note.

3. Enter the subject of the to-do note, and select Save.

4. Select either High, Medium, or Low priority. The to-do note is saved. The

device automatically sets the deadline.

View a To-do note

1. From the start screen, select Menu > Organizer > To-do list.

Organizer

2. Highlight a to-do note, and select Options to select from the following:

Add—Add another note (available only in header view).

Delete—Delete the note.

Mark note as done—Mark a note or task as complete; no more reminders will

follow.

Sort by deadline—Sort the notes according to their deadline.

Send—Send the note to another device using IR, as a text or multimedia

message, or as a calendar note to another compatible device.

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do note to a date on your calendar.

Delete all notes—Delete all the to-do notes in the list (available only in header

view).

3. View the to-do note and select Edit to edit the note or Options to select from

the following:

Deadline—Set a deadline for the note (available only in body view).

Mark note as done—Mark a note or task as complete; no more reminders will

follow.

Delete—Delete the note.

Edit priority—Change the priority to high, medium, or low (available only in

body view).

Send—Send the note to another device using IR, as a text or multimedia

message, or as a calendar note to another compatible device.

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do note to a date on your calendar.

■Calculator

The calculator in your device adds, subtracts, multiplies, divides, calculates the

square and the square root, changes the sign of the number entered, and

converts currency values.

Note: This calculator has a limited accuracy and is designed for simple

calculations.

Organizer

1. At the start screen, select Menu > Organizer > Calculator.

2. Enter the first number in the calculation. Press # for a decimal point if

necessary.

To perform a square or square root calculation, select Options > Square or

Square root.

To cycle through the add (+), subtract (-), multiply (*), and divide (/)

characters, press *. Pause briefly to select the displayed character.

To change the sign, select Options > Change sign, or scroll up or down.

3. Enter the second number in your calculation.

4. Select Equals if calculation is complete or Options if more functions are

required.

Currency converter

You can convert foreign currency to domestic, or vice versa, directly from the

start screen or from the Calculator menu.

Note: When you change base currency, you must key in the new rates

because all previously set exchange rates are set to zero.

1. At the start screen, select Menu > Organizer > Calculator > Options >

Exchange rate > Foreign units in home units or Home units in foreign units.

Foreign units in home units—The number of home units it takes to make one

unit of foreign currency.

Home units in foreign units—The number of foreign units it takes to make one

unit of your home currency.

2. Enter the exchange rate (press # to insert a decimal), and select OK.

3. At the start screen, select Back to return to Calculator screen and enter

currency amount to convert.

4. Select Options > To home or To foreign.

To home—converts foreign currency to domestic currency.

To foreign—converts domestic currency to foreign currency.

5. If you haven’t already entered an exchange rate, the device will prompt you

to enter it now. Select OK. You can edit the exchange rate at any time.

Organizer

■Countdown timer

You can enter a specified time (up to 99 hours and 59 minutes). When the time

runs out, your device sounds an alarm.

Note: The countdown timer only works when the device is on. Once you

turn off your device, the timer is no longer active.

Set the countdown timer

1. At the start screen, select Menu > Organizer > Countdown timer.

2. Enter the time (in hh:mm format), and select OK.

3. Enter a note for the timer, and select OK.

The icon appears on the start screen when the countdown timer is set. When

the time runs out, your device sounds an alarm, displays the timer note, and

flashes its lights.

Press any key during the alarm to stop the alarm. After 3 minutes the timer alert

expires automatically.

Change the time

After you have set the timer, you can change the time.

1. At the start screen, select Menu > Organizer > Countdown timer > Change

time.

2. Enter the new time, and select OK.

3. Leave the note as it was, or enter a new note, and select OK.

Stop the timer before the alarm sounds

After you have set the timer, you can stop the timer. At the start screen, select

Menu > Organizer > Countdown timer > Stop timer.

■Stopwatch

Your device has a stopwatch that can be used to track time. The stopwatch

displays time in hours, minutes, seconds and fractions of a second in hh:mm:ss:s

format.

Using the stopwatch or allowing it to run in the background when using other

features increases the demand on battery power and reduces the battery life.

Organizer

Measure time

1. At the start screen, select Menu > Organizer > Stopwatch > Split timing or

Lap timing > Start. The running time displays.

Split timing—You can use the split time function for such things as a long

distance race when you need to pace yourself. Select Split to note the lapsed

time. The timer continues to run and the split time appears below the running

time. Each time you select Split, the new measured time appears at the

beginning of the list.

Lap timing—You can use the lap time function when you want to track how

long it takes to complete each cycle or lap. Select Lap to note the lap time.

The clock stops, then starts immediately from zero. The lap time appears

below the running time. Each time you select Lap, the new measured time

appears at the beginning of the list.

2. Select Stop to end the timing and display the total time or select Stop >

Options > Start or Reset to continue or reset timing.

Save, view or delete lap and split times

• To save a time while the clock is running select Stop > Save, enter a name for

the measurement, and select OK. If you do not enter a name, the total time is

used as the default title for the lap or split time.

• To view a saved time, from the start screen, select Menu > Organizer >

Stopwatch > Show last time or View times.

• To delete a saved time, from Stopwatch, select View times > enter the time to

delete > Delete > Yes or select Delete times > One by one or Delete all.

Operation note

If you press the end key and return to the start screen, the clock continues to run

in the background and the icon appears in the upper left corner of the

screen.

To return to the stopwatch screens, at the start screen, select Menu > Organizer

> Stopwatch >Continue. To stop the clock, select Stop.

Options

You can choose the following options when using the stopwatch:

Organizer

Continue—Appears when the stopwatch is working in the background.

Show last time— Appears when you have saved a split or lap time. Displays the

last time saved.

Split timing—Asks if you want to discontinue previous timing.

Lap timing—Asks if you want to discontinue previous timing.

View times—Allows you to browse the saved times.

Delete times—Allows you to delete any saved times. You can delete the saved

times one by one or all at once.

Mobile Web

12. Mobile Web

Minibrowser is a network service. See ’Network Services,’ p. 6.

Your device has a built-in browser you can use to connect to selected services on

the mobile internet. If your wireless service provider supports this feature, then

you can view weather reports, check news or flight times, view financial

information, and much more. The Web browser on your device can display WAP-

based content.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

internet site.

The security icon does not indicate that the data transmission between the

gateway and the content server (or place where the requested resource is stored)

is secure. The service provider secures the data transmission between the

gateway and the content server.

■Mobile internet access

Because mobile Internet content is designed to be viewed from your device, your

wireless provider is now your mobile Internet service provider as well.

It is likely that your wireless provider has created a home page and set up your

browser to go to this page when you log on to the mobile Internet. Once at your

service provider’s home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your device.

Normally this is done by your wireless provider once you have subscribed to the

feature. Contact your wireless provider if you have problems using the browser.

■Sign on to the mobile internet

At the start screen, select Menu > Mobile web > Minibrowser > Connect or the

operator provided menu item.

After a brief pause, your device attempts to connect to your wireless provider’s

home page. If you receive an error message, your device may not be set up for

browsing. Contact your wireless provider to make sure that your device is

configured properly.

Mobile Web

■Navigate the mobile Internet

Since your device screen is much smaller than a computer screen, mobile Internet

content is displayed differently than you may be accustomed to seeing. This

section contains guidelines for using the keys to navigate a WAP site.

Phone keys

• Press the Power key to display the Minibrowser home screen.

• Scroll up or down to browse the WAP site.

• Select an item.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press *.

Receive a call while online

Depending on your wireless service provider, you may still be able to receive a

voice call while using the WAP browser.

• To answer the incoming call, press the call key.

• To reject the incoming call, press the end key.

After you end your voice call, the mobile Internet connection automatically

resumes.

Note: If your wireless service provider does not support incoming calls

while browsing, then the incoming calls are automatically diverted to

voice mail.

Make an emergency call while online

You can end your data connection then make an emergency call.

1. To close your mobile Internet connection, press the end key.

2. Press the end key as many times as needed to clear the display and ready the

device for calls.

3. Enter the emergency number for your present location (for example, 911).

Emergency numbers vary by location.

4. Press the call key.

Mobile Web

Clear the cache and disconnect

A cache is a memory location that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed

are stored in the cache. To empty the cache while in the browser menu, select

Navigate > Advanced > Clear > Cache from the home page. You can also clear

the cache by pressing and holding the Power key to power off your device.

To close your mobile internet connection while browsing, press the end key.

Extras

13. Extras

Challenge yourself or a friend to one of the fun games in your

device. Some menus listed are network services. Contact your wireless provider

for more information. When you download games or applications, they may be

saved in either the Games or the Collection folders.

■Games

At the start screen, select Menu > Extras >Games to display the games on your

device: 3D Snow Boarding, Nokia Puzzle, Club Pinball, and Bounce.

■Collections

Collections is a network service. See ’Network Services,’ p. 6. If your wireless

service provider supports this feature, you will find useful applications pre-

installed on your device. Also, you can manage and download new Java

applications that may be offered by your wireless provider.

An application may require a few seconds to load. When you open an application,

wait for the launch screen to disappear. At that point, the application is ready.

1. At the start screen, select Menu > Extras > Collection.

2. Select an application: World Clock, Translator, Lunar Calendar, or Converter.

Note: Only install applications from sources that offer adequate

protection against harmful software.

■Memory

You can view the size of memory available for games or application installations.

At the start screen, select Menu > Extras > Memory.

Note: Only install applications from sources that offer adequate

protection against harmful software.

PC Connectivity

14. PC Connectivity

■USB data transfer

You can transfer data such as music, photos, and videos from your device to a

compatible PC, or from a compatible PC to your device using a DKU-2 USB data

cable. The cable is connected to your device correctly when the arrowhead points

toward the display screen. Disconnect the USB data cable from the device to

make a call.

Use the Nokia Audio Manager software to handle your music files and transfer

them from the PC to the memory card in your device. See ’Nokia PC Suite,’ p. 96.

Transfer files using Windows Explorer

After you have installed the Nokia Audio Manager, it is possible to use Windows

Explorer to transfer music, photo, and video files to your device and from your

device to your PC.

1. Connect your PC and your device with a DKU-2 USB cable. Data enhancement

connected displays on your device.

2. Open Windows Explorer. Your device will appear as a local drive (named by

Nokia 6235, Nokia 6235i, Nokia 6236, and Nokia 6236i), and with a drive

letter assigned to it.

3. Click on the folders to display a window that shows the contents of the folder

on the device memory card.

4. Open a second instance of Windows Explorer and display the contents of the

folder on your PC where you have MP3 files, photo files, or video files stored.

5. Select the files on your PC that you wish to transfer to the device.

6. Drag and drop the files from the second window into the first window and

place them in a folder.

7. The files are transferred to the device and can be played by the Music player,

or accessed by the Media player.

If you selected files that require more memory than the device memory has,

an error note displays. Deselect some of your files until the selections fit the

memory.

PC Connectivity

8. Disconnect the USB cable by double-clicking the green arrow on the taskbar

at the bottom of your PC screen. A window pops up that shows Unplug or

Eject Hardware.

9. Click on USB device in the hardware devices window. A popup window shows

Stop a Hardware device.

10. Highlight USB device and click OK. The popup window Safe to Remove

Hardware is shown with the message The ‘USB Device’ device can now be

safely removed from the system. Select OK.

Important: To ensure that all memory card operations are completed in

a controlled way, do not unplug the connectivity cable until Windows

notifies you that it is safe to do so. Uncontrolled completion of the

memory card operations may cause the memory card and the

information stored on it to become corrupted. A corrupted memory card

may have to be formatted before it can be used again. When a memory

card is formatted, all information on the card is permanently lost.

■Nokia PC Suite

Nokia PC Suite software is available for the Nokia 6235, Nokia 6235i, Nokia

6236, and 6236i phones. Nokia PC Suite is a collection of powerful tools that you

can use to manage your device features and data. Each component is a separate

program that includes online helps. Nokia PC Suite software, installation

instructions, and other documentation, which are provided free of charge and

can be downloaded from the software downloads of the Nokia Web site:

www.nokiausa.com/pcsuite.

Some of the features in your device require network support. Contact your

service provider for availability and configuration instructions.

• Nokia Image Converter makes images usable for multimedia messages or

wallpapers and transfers them to your device.

• Nokia Sound Converter edits polyphonic ringing tones to be compatible with

your device and transfers them to your device.

• Nokia Content Copier copies information or backs up information from your

device to the PC or to another compatible Nokia device.

• Nokia Phone Editor sends text messages and edits the contact directory and

message settings of your device.

PC Connectivity

• Nokia PC Sync synchronizes the contacts directory and calendar between

your device and a compatible PC.

• Nokia Connection Manager selects the connection type between the PC and

the device.

• Nokia Phone Browser copies images and tones from your device to your PC

and vice versa.

from being copied, modified, transferred or forwarded.

Enhancements

15. Enhancements

Check the model number of any charger before use

with this device. This device is intended for use when

supplied with power from ACP-7 or ACP-12.

Warning: Use only batteries, chargers and

enhancements approved by Nokia for use with this particular model. The

use of any other types may invalidate any approval or warranty, and may

be dangerous. For availability of approved enhancements, please check

with your dealer.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and

are operating properly.

• Installation of any complex car enhancements must be made by qualified

personnel only.

Power

• Standard 1070 mAh Li-Ion Battery (BL-6C, BL-5C)

• Standard Travel Charger (ACP-7)

• Travel Charger (ACP-12)

• Retractable Charger (AC-1)

Go to www.nokiausa.com/phones for more information about enhancements.

Reference information

16. Reference information

■Battery information

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times but it will

eventually wear out. When the talk and standby times are noticeably shorter

than normal, buy a new battery. Use only Nokia approved batteries, and recharge

your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do

not leave the battery connected to a charger. Overcharging may shorten its

lifetime. If left unused, a fully charged battery will lose its charge over time.

Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery

that is damaged.

Do not short-circuit the battery. Accidental short-circuitring can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the

positive (+) and negative (-) terminals of the battery. (These look like metal strips

on the battery.) This might happen, for example, when you carry a spare battery

in your pocket or purse. Short-circuitring the terminals may damage the battery

or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot

or cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local

regulations. Please recycle when possible. Do not dispose as household waste.

■Nokia battery authentication guidelines

Always use original Nokia batteries for your safety. To check that you are getting

an original Nokia battery, purchase it from an authorized Nokia dealer, look for

the Nokia Original Enhancements logo on the packaging, and inspect the

hologram label using the following steps:

Reference information

100

Successful completion of the four steps is not a total assurance of the

authenticity of the battery. If you have any reason to believe that your battery is

not an authentic original Nokia battery, you should refrain from using it and take

it to the nearest authorized Nokia service point or dealer for assistance. Your

authorized Nokia service point or dealer will inspect the battery for authenticity.

If authenticity cannot be verified, return the battery to the place of purchase.

Authenticate hologram

1.When looking at the hologram label, you should see

the Nokia connecting hands symbol from one angle

and the Nokia Original Enhancements logo when

looking from another angle.

2.When you angle the hologram. to the left, right,

down, and up sides of the logo, you should see 1, 2, 3,

and 4 dots on each side respectively.

3.Scratch the side of the label to reveal a 20-digit

code, for example, 12345678919876543210. Turn the

battery so that the numbers are facing upwards. The

20-digit code reads starting from the number at the

top row followed by the bottom row.

4.Confirm that the 20-digit code is valid by following

the instructions at www.nokiausa.com/batterycheck.

What if your battery is not authentic?

If you cannot confirm that your Nokia battery with the hologram label is an

authentic Nokia battery, please do not use the battery. Take it to the nearest

authorized Nokia service point or dealer for assistance. The use of a battery that

is not approved by the manufacturer may be dangerous and may result in poor

performance and damage to your device and its enhancements. It may also

invalidate any approval or warranty applying to the device.

To find out more about original Nokia batteries visit www.nokiausa.com/battery.

Care and maintenance

101

Care and maintenance

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage and enjoy your device for many years.

• Keep the device and all of its parts and accessories out of the reach of small

children.

• Keep the device dry. Precipitation, humidity and all types of liquids or

moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, remove the battery and allow the device to dry

completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity

sensor, and light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

• Use chargers indoors.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

Additional safety information

102

Additional safety information

■Operating environment

Your device and its enhancements may contain small parts. Keep them out of the

reach of small children.

Remember to follow any special regulations in force in any area and always

switch off your device when its use is prohibited or when it may cause

interference or danger. Use the device only in its normal operating positions. This

device meets RF exposure guidelines when used either in the normal use position

against the ear of when positioned at least 7/8 inch (2.2 cm) away from the body.

When a carry case, belt clip, or holder is used for body-worn operation, it should

not contain metal and should position the device at least 7/8 inch (2.2 cm) away

from your body.

In order to transmit data files or messages, this device requires a quality

connection to the network. In some cases, transmission of data files or messages

may be delayed until such a connection is available. Ensure the above separation

distance instructions are followed until the transmission is completed.

■Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices.

Consult a physician or the manufacturer of the medical device to determine if

they are adequately shielded from external RF energy or if you have any

questions. Switch off your device in health care facilities when any regulations

posted in these areas instruct you to do so. Hospitals or health care facilities may

be using equipment that could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 in

(15.3 cm) be maintained between a wireless device or phone and a pacemaker to

avoid potential interference with the pacemaker. These recommendations are

consistent with the independent research by and recommendations of Wireless

Technology Research. To minimize the potential for interference, persons with

pacemakers should

• Always keep the device more than 6 inches (15.3 cm) from their pacemaker

when the device is switched on

• Not carry the device in a breast pocket

Additional safety information

103

• Hold the device to the ear opposite the pacemaker to minimize the potential

for interference.

If you have any reason to suspect that interference is taking place, switch off

your device immediately.

HEARING AIDS

Some digital wireless devices may interfere with some hearing aids. If

interference occurs, consult your service provider.

■Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, air bag

systems. For more information, check with the manufacturer or its representative

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a

vehicle. Faulty installation or service may be dangerous and may invalidate any

warranty that may apply to the device. Check regularly that all wireless device

equipment in your vehicle is mounted and operating properly. Do not store or

carry flammable liquids, gases, or explosive materials in the same compartment

as the device, its parts, or enhancements. For vehicles equipped with an air bag,

remember that an air bags inflate with great force. Do not place objects,

including installed or portable wireless equipment in the area over the air bag or

in the air bag deployment area. If in-vehicle wireless equipment is improperly

installed and the air bag inflates, serious injury could result.

FCC regulations prohibit using your wireless device while in the air. The use of

wireless telephones in an aircraft may be dangerous to the operation of the

aircraft, disrupt the wireless telephone network, and may be illegal.

■Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include

areas where you would normally be advised to turn off your vehicle engine.

Sparks in such areas could cause an explosion or fire resulting in bodily injury or

even death. Switch off the device at refuelling points such as near gas pumps at

service stations. Observe restrictions on the use of radio equipment in fuel

depots, storage, and distribution areas, chemical plants or where blasting

operations are in progress. Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include below deck on boats, chemical

Additional safety information

104

transfer or storage facilities, vehicles using liquefied petroleum gas (such as

propane or butane), and areas where the air contains chemicals or particles such

as grain, dust or metal powders.

Failure to observe these instructions may lead to suspension or denial of

telephone services to the offender, legal action, or both.

■Emergency calls

Important: Wireless phones, including this device, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless device for

essential communications like medical emergencies.

To make an emergency call, make sure your device is properly charged before

attempting any emergency calls. If your battery becomes empty, you cannot

receive or make calls, including emergency calls and must wait a few minutes

after the charging begins to place your call.

1. If the device is not on, switch it on. Check for adequate signal strength. Some

networks may require that a valid UIM (CDMA SIM) card is properly inserted

in the device.

2. Press the end key as many times as needed to clear the display and ready the

device for calls.

3. Key in the official emergency number for your present location and press the

call key. Emergency numbers vary by location

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. If the device is in an offline or flight mode you

must change the profile to activate the device function before you can make an

emergency call. Consult this guide or your service provider. When making an

emergency call, give all the necessary information as accurately as possible. Your

wireless device may be the only means of communication at the scene of an

accident. Do not end the call until given permission to do so.

■Certification Information (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR

EXPOSURE TO RADIO WAVES.

Your mobile device is a radio transmitter and receiver. It is designed and

manufactured not to exceed the limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission (FCC) of the U.S.

Government. These limits are part of comprehensive guidelines and establish

Additional safety information

105

permitted levels of RF energy for the general population. The guidelines are based

on standards that were developed by independent scientific organizations

through periodic and thorough evaluation of scientific studies. The standards

include a substantial safety margin designed to assure the safety of all persons,

regardless of age and health.

The exposure standards for wireless mobile devices employ a unit of

measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by

the FCC is 1.6 watts/kilogram (W/kg).* Tests for SAR are conducted using

standard operating positions accepted by the RCC with the phone transmitting at

its highest certified power level in all tested frequency bands. Although the SAR

is determined at the highest certified power level, the actual SAR level of an

operating device can be well below the maximum value. This is because the

device is designed to operate at multiple power levels so as to use only the power

required to reach the network. In general, the closer you are to a wireless base

station antenna, the lower the power output.

Before a device model is available for sale to the public, it must be tested and

certified to the FCC that it does not exceed the limit established by the

government-adopted requirement for safe exposure. The tests are performed in

positions and locations (e.g., at the ear and worn on the body) as required by the

FCC for each model.

The highest SAR value reported to the FCC when tested for use at the ear is

1.24 W/kg, and when worn on the body, as described in this user guide, is 1.26 W/

kg. (Body-worn measurements differ among phone models, depending upon

available enhancements and FCC requirements.)

While there may be differences between the SAR levels of various phones and at

various positions, they all meet the government requirement. The FCC has

granted an Equipment Authorization for this model phone with all reported SAR

levels evaluated as in compliance with the FCC RF exposure guidelines. SAR

information on this model device is on file with the FCC and can be found under

the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC

ID QMNRM-60.

For body-worn operations, this phone has been tested and meets the FCC RF

exposure guidelines for use with a carry case, belt clip or holder that contains no

metal and that positions the handset a minimum of 7/8 inch (2.2 cm) away from

the body. Use of other carry cases, belt clips or holders may not ensure

compliance with the FCC RF exposure guidelines. If you do not use a body-worn

enhancement and are not holding the phone at the ear, positions the handset a

minimum of 7/8 inch (2.2 cm) away from your body when the phone is switched

on.

Additional safety information

106

*In the United States and Canada, the SAR limit for mobile phone used by the

public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The

standard incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in measurements. SAR

values may vary depending on national reporting requirements and the network

band. For SAR information in other regions, please look under product

information at www.nokiausa.com.

■Technical information

Type designation—RM-60

Dimensions—Width 42.3 mm; length 105.5 mm; depth 18 mm

Weight—98 g with BL-6C Li-Ion Battery

Volume—69 cu cm

Wireless networks—CDMA 800 MHz, CDMA 1900 MHz, and AMPS 800

Frequency range (Tx)—AMPS: 824.04-848.97 MHz, PCS: 1851.25-1908.75 MHz,

Cellular: 824.70-848.37 MHz

Frequency range (Rx)—AMPS: 869.04-893.97 MHz, PCS: 1931.25-1988.75 MHz,

Cellular: 869.70-893.37 MHz

GPS frequency—1575.42 MHz

■Battery information

This section provides information about battery charging times with the Travel

Charger (ACP-12) and the Standard Travel Charger (ACP-7), talk-times, and

standby times. Be aware that the information in this section is subject to change.

For more information, contact your service provider.

Charging times

The following charging times are approximate with the BL-6C 1070 mAh Li-Ion

battery:

Travel Charger (ACP-12): Up to 1 hour 35 minutes

Standard Travel Charger (ACP-7): Up to 3 hours 45 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use,

network conditions, features used, battery age and condition (including charging

habits), temperatures to which the battery is exposed, and many other factors.

Additional safety information

107

Talk time: 3 to 3.5 hours (digital)

Standby time: 8 to 12 days

■Patent information

Manufactured or sold under one or more of the following US patents:

5889770

6148209

6072787

5802465

5596571

6128322

5991627

5699482

4969192

5754976

5701392

5859843

6078570

5924026

6510148

6009328

5930233

5793744

6556824

6775548

Additional safety information

108

■Nokia one-year limited warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from

defects in material and workmanship that result in Product failure during normal

usage, according to the following terms and conditions:

1. The limited warranty for the Product extends for ONE (1) year beginning on

the date of the purchase of the Product. This one year period is extended by

each whole day that the Product is out of your possession for repair under

this warranty.

2. The limited warranty extends only to the original purchaser (“Consumer”) of

the Product and is not assignable or transferable to any subsequent

purchaser/end-user.

3. The limited warranty extends only to Consumers who purchase the Product in

the United States of America.

4. During the limited warranty period, Nokia will repair, or replace, at Nokia’s

sole option, any defective parts, or any parts that will not properly operate for

their intended use with new or refurbished replacement items if such repair

or replacement is needed because of product malfunction or failure during

normal usage. No charge will be made to the Consumer for any such parts.

Nokia will also

pay for the labor charges incurred by Nokia in repairing or replacing the

defective parts. The limited warranty does not cover defects in appearance,

cosmetic, decorative or structural items, including framing, and any non-

operative parts. Nokia’s limit of liability under the limited warranty shall be

the actual cash value of the Product at the time the Consumer returns the

Product for repair, determined by the price paid by the Consumer for the

Product less a reasonable amount for usage. Nokia shall not be liable for any

other losses or damages. These remedies are the Consumer’s exclusive

remedies for breach of warranty.

5. Upon request from Nokia, the Consumer must prove the date of the original

purchase of the Product by a dated bill of sale or dated itemized receipt.

6. The Consumer shall bear the cost of shipping the Product to Nokia in

Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to

the Consumer after the completion of service under this limited warranty.

Additional safety information

109

7. The Consumer shall have no coverage or benefits under this limited warranty

if any of the following conditions are applicable:

a) The Product has been subjected to abnormal use, abnormal conditions,

improper storage, exposure to moisture or dampness, unauthorized

modifications, unauthorized connections, unauthorized repair, misuse,

neglect, abuse, accident, alteration, improper installation, or other acts

which are not the fault of Nokia, including damage caused by shipping.

b) The Product has been damaged from external causes such as collision

with an object, or from fire, flooding, sand, dirt, windstorm, lightning,

earthquake or damage from exposure to weather conditions, an Act of

God, or battery leakage, theft, blown fuse, or improper use of any

electrical source, damage caused by computer or internet viruses, bugs,

worms, Trojan Horses, cancelbots or damage caused by the connection to

other products not recommended for interconnection by Nokia.

c) Nokia was not advised in writing by the Consumer of the alleged defect or

malfunction of the Product within fourteen (14) days after the expiration

of the applicable limited warranty period.

d) The Product serial number plate or the enhancement data code has been

removed, defaced or altered.

e) The defect or damage was caused by the defective function of the cellular

system or by inadequate signal reception by the external antenna, or

viruses or other software problems introduced into the Product.

8. Nokia does not warrant uninterrupted or error-free operation of the Product.

If a problem develops during the limited warranty period, the Consumer shall

take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair

or replacement processing.

b) If “a” is not convenient because of distance (more than 50 miles) or for

other good cause, the Consumer shall ship the Product prepaid and

insured to:

Nokia Inc., Attn: Repair Department

795 West Nasa Blvd.

Melbourne, FL 32901

Additional safety information

110

c) The Consumer shall include a return address, daytime phone number and/

or fax number, complete description of the problem, proof of purchase

and service agreement (if applicable). Expenses related to removing the

Product from an installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by

this limited warranty. The Consumer will be responsible for any expenses

related to reinstallation of the Product.

e) Nokia will repair the Product under the limited warranty within 30 days

after receipt of the Product. If Nokia cannot perform repairs covered

under this limited warranty within 30 days, or after a reasonable number

of attempts to repair the same defect, Nokia at its option, will provide a

replacement Product or refund the purchase price of the Product less a

reasonable amount for usage. In some states the Consumer may have the

right to a loaner if the repair of the Product takes more than ten (10) days.

Please contact the Customer Service Center at Nokia at the telephone

number listed at the end of this warranty if you need a loaner and the

repair of the Product has taken or is estimated to take more than ten (10)

days.

f) If the Product is returned during the limited warranty period, but the

problem with the Product is not covered under the terms and conditions

of this limited warranty, the Consumer will be notified and given an

estimate of the charges the Consumer must pay to have the Product

repaired, with all shipping charges billed to the Consumer. If the estimate

is refused, the Product will be returned freight collect. If the Product is

returned after the expiration of the limited warranty period, Nokia’s

normal service policies shall apply and the Consumer will be responsible

for all shipping charges.

9. You (the Consumer) understand that the product may consist of refurbished

equipment that contains used components, some of which have been

reprocessed. The used components comply with Product performance and

reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A

PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE

FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING

LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY

Additional safety information

111

AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA

SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR

CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF

ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF

DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY

ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE

EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,

INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING FROM THE

PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF THE

WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY

OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE

LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN

RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE

DURING THE PERIOD THAT THE PRODUCT IS BEING REPAIRED.

11. Some states do not allow limitation of how long an implied warranty lasts, so

the one year warranty limitation may not apply to you (the Consumer). Some

states do not allow the exclusion or limitation of incidental and

consequential damages, so certain of the above limitations or exclusions may

not apply to you (the Consumer). This limited warranty gives the Consumer

specific legal rights and the Consumer may also have other rights which vary

from state to state.

12. Nokia neither assumes nor authorizes any authorized service center or any

other person or entity to assume for it any other obligation or liability beyond

that which is expressly provided for in this limited warranty including the

provider or seller of any extended warranty or service agreement.

13. This is the entire warranty between Nokia and the Consumer, and supersedes

all prior and contemporaneous agreements or understandings, oral or

written, relating to the Product, and no representation, promise or condition

not contained herein shall modify these terms.

14. This limited warranty allocates the risk of failure of the Product between the

Consumer and Nokia. The allocation is recognized by

the Consumer and is reflected in the purchase price.

15. Any action or lawsuit for breach of warranty must be commenced within

eighteen (18) months following purchase of the Product.

Additional safety information

112

16. Questions concerning this limited warranty may be directed to:

Nokia Inc.

Attn: Customer Service

7725 Woodland Center Blvd., Ste. 150

Tampa, FL 33614

Telephone: 1-888-NOKIA-2U (1-888-665-4228)

Facsimile: (813) 249-9619

TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

17. The limited warranty period for Nokia supplied attachments and accessories

is specifically defined within their own warranty cards and packaging.

Additional safety information

113

Appendix A Message from the

CTIA

(Cellular

Telecommunications &

Internet Association)

to all users of mobile phones

Rights Reserved.1250 Connecticut Avenue, NW Suite 800,

Washington, DC 20036. Phone: (202) 785-0081

Additional safety information

114

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique

combination of convenience, safety and value delivered by the wireless

telephone. Quite simply, the wireless phone gives people the powerful ability to

communicate by voice—almost anywhere, anytime—with the boss, with a client,

with the kids, with emergency personnel or even with the police. Each year,

Americans make billions of calls from their wireless phones, and the numbers are

rapidly growing.But an important responsibility accompanies those benefits, one

that every wireless phone user must uphold. When driving a car, driving is your

first responsibility. A wireless phone can be an invaluable tool, but good

judgment must be exercised at all times while driving a motor vehicle—whether

on the device or not.The basic lessons are ones we all learned as teenagers.

Driving requires alertness, caution and courtesy. It requires a heavy dose of basic

common sense—keep your head up, keep your eyes on the road, check your

mirrors frequently and watch out for other drivers. It requires obeying all traffic

signs and signals and staying within the speed limit. It means using seatbelts and

requiring other passengers to do the same. But with wireless phone use, driving

safely means a little more. This brochure is a call to wireless phone users

everywhere to make safety their first priority when behind the wheel of a car.

Wireless telecommunications is keeping us in touch, simplifying our lives,

protecting us in emergencies and providing opportunities to help others in need.

When it comes to the use of wireless phones, safety is your most important call.

Wireless Phone Safety Tips

Below are safety tips to follow while driving and using a wireless phone which

should be easy to remember.

1. Get to know your wireless phone and its features such as speed dial and

redial. Carefully read your instruction manual and learn to take advantage of

valuable features most phones offer, including automatic redial and memory.

Also, work to memorize the device keypad so you can use the speed dial

function without taking your attention off the road.

2. When available, use a hands-free device. A number of hands-free wireless

phone accessories are readily available today. Whether you choose an

installed mounted device for your wireless phone or a speaker phone

accessory, take advantage of these devices if available to you.

Additional safety information

115

3. Position your wireless phone within easy reach. Make sure you place your

wireless phone within easy reach and where you can grab it without

removing your eyes from the road. If you get an incoming call at an

inconvenient time, if possible, let your voice mail answer it for you.

4. Suspend conversations during hazardous driving conditions or situations. Let

the person you are speaking with know you are driving; if necessary, suspend

the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow

and ice can be hazardous, but so is heavy traffic. As a driver, your first

responsibility is to pay attention to the road.

5. Do not take notes or look up phone numbers while driving. If you are reading

an address book or business card, or writing a "to do" list while driving a car,

you are not watching where you are going. It’s common sense. Don’t get

caught in a dangerous situation because you are reading or writing and not

paying attention to the road or nearby vehicles.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not

moving or before pulling into traffic. Try to plan your calls before you begin

your trip or attempt to coincide your calls with times you may be stopped at a

stop sign, red light or otherwise stationary. But if you need to dial while

driving, follow this simple tip—dial only a few numbers, check the road and

your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be

distracting. Stressful or emotional conversations and driving do not mix—

they are distracting and even dangerous when you are behind the wheel of a

car. Make people you are talking with aware you are driving and if necessary,

suspend conversations which have the potential to divert your attention from

the road.

8. Use your wireless phone to call for help. Your wireless phone is one of the

greatest tools you can own to protect yourself and your family in dangerous

situations—with your phone at your side, help is only three numbers away.

Dial 9-1-1 or other local emergency number in the case of fire, traffic

accident, road hazard or medical emergency. Remember, it is a free call on

your wireless phone!

9. Use your wireless phone to help others in emergencies. Your wireless phone

provides you a perfect opportunity to be a "Good Samaritan" in your

community. If you see an auto accident, crime in progress or other serious

Additional safety information

116

emergency where lives are in danger, call 9-1-1 or other local emergency

number, as you would want others to do for you.

10. Call roadside assistance or a special wireless nonemergency assistance

number when necessary. Certain situations you encounter while driving may

require attention, but are not urgent enough to merit a call for emergency

services. But you still can use your wireless phone to lend a hand. If you see a

broken-down vehicle posing no serious hazard, a broken traffic signal, a

minor traffic accident where no one appears injured or a vehicle you know to

be stolen, call roadside assistance or other special non-emergency wireless

number.

Careless, distracted individuals and people driving irresponsibly represent a

hazard to everyone on the road. Since 1984, the Cellular Telecommunications

Industry Association and the wireless industry have conducted educational

outreach to inform wireless phone users of their responsibilities as safe drivers

and good citizens. As we approach a new century, more and more of us will take

advantage of the benefits of wireless telephones. And, as we take to the roads,

we all have a responsibility to drive safely.The wireless industry reminds you to

use your phone safely when driving.For more information, please call 1-888-

901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/

articles.cfm?ID=85

Additional safety information

117

Appendix B

Message from the FDA

(U.S. Food and Drug

Administration)

to all users of mobile

phones.

Additional safety information

118

Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that

wireless phones are absolutely safe. Wireless phones emit low levels of

radiofrequency energy (RF) in the microwave range while being used. They

also emit very low levels of RF when in the stand-by mode. Whereas high

levels of RF can produce health effects (by heating tissue), exposure to low

level RF that does not produce heating effects causes no known adverse

health effects. Many studies of low level RF exposures have not found any

biological effects. Some studies have suggested that some biological effects

may occur, but such findings have not been confirmed by additional research.

In some cases, other researchers have had difficulty in reproducing those

studies, or in determining the reasons for inconsistent results.

2. What is FDA's role concerning the safety of wireless

phones?

Under the law, FDA does not review the safety of radiation-emitting

consumer products such as wireless phones before they can be sold, as it does

with new drugs or medical devices. However, the agency has authority to take

action if wireless phones are shown to emit radio frequency energy (RF) at a

level that is hazardous to the user. In such a case, FDA could require the

manufacturers of wireless phones to notify users of the health hazard and to

repair, replace or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions,

FDA has urged the wireless phone industry to take a number of steps,

including the following:

• Support needed research into possible biological effects of RF of the type

emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the

user that is not necessary for device function; and

Additional safety information

119

• Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that

have responsibility for different aspects of RF safety to ensure coordinated

efforts at the federal level. The following agencies belong to this working

group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working

group activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United

States must comply with FCC safety guidelines that limit RF exposure. FCC

relies on FDA and other health agencies for safety questions about wireless

phones. FCC also regulates the base stations that the wireless phone

networks rely upon. While these base stations operate at higher power than

do the wireless phones themselves, the RF exposures that people get from

these base stations are typically thousands of times lower than those they

can get from wireless phones. Base stations are thus not the subject of the

safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-

in antennas, often called cell mobile or PCS phones. These types of wireless

phones can expose the user to measurable radio frequency energy (RF)

because of the short distance between the device and the user’s head. These

RF exposures are limited by Federal Communications Commission safety

guidelines that were developed with the advice of FDA and other federal

health and safety agencies. When the device is located at greater distances

from the user, the exposure to RF is drastically lower because a person's RF

exposure decreases rapidly with increasing distance from the source. The so-

Additional safety information

120

called cordless phones; which have a base unit connected to the telephone

wiring in a house, typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies

have suffered from flaws in their research methods. Animal experiments

investigating the effects of radio frequency energy (RF) exposures

characteristic of wireless phones have yielded conflicting results that often

cannot be repeated in other laboratories. A few animal studies, however, have

suggested that low levels of RF could accelerate the development of cancer in

laboratory animals. However, many of the studies that showed increased

tumor development used animals that had been genetically engineered or

treated with cancer-causing chemicals so as to be pre-disposed to develop

cancer in the absence of RF exposure. Other studies exposed the animals to

RF for up to 22 hours per day. These conditions are not similar to the

conditions under which people use wireless phones, so we don’t know with

certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the

use of wireless phones and primary brain cancer, glioma, meningioma, or

acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other

cancers. None of the studies demonstrated the existence of any harmful

health effects from wireless phone RF exposures. However, none of the

studies can answer questions about long-term exposures, since the average

period of phone use in these studies was around three years.

5. What research is needed to decide whether RF exposure

from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people

actually using wireless phones would provide some of the data that are

needed. Lifetime animal exposure studies could be completed in a few years.

However, very large numbers of animals would be needed to provide reliable

proof of a cancer promoting effect if one exists. Epidemiological studies can

provide data that is directly applicable to human populations, but 10 or more

Additional safety information

121

years follow-up may be needed to provide answers about some health

effects, such as cancer. This is because the interval between the time of

exposure to a cancer-causing agent and the time tumors develop - if they do

- may be many, many years. The interpretation of epidemiological studies is

hampered by difficulties in measuring actual RF exposure during day-to-day

use of wireless phones. Many factors affect this measurement, such as the

angle at which the device is held, or which model of phone is used.

6. What is FDA doing to find out more about the possible

health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization

International Electromagnetic Fields (EMF) Project since its inception in

1996. An influential result of this work has been the development of a

detailed agenda of research needs that has driven the establishment of new

research programs around the world. The Project has also helped develop a

series of public information documents on EMF issues.

FDA and the Cellular Telecommunications & Internet Association (CTIA) have

a formal Cooperative Research and Development Agreement (CRADA) to do

research on wireless phone safety. FDA provides the scientific oversight,

obtaining input from experts in government, industry, and academic

organizations. CTIA-funded research is conducted through contracts to

independent investigators. The initial research will include both laboratory

studies and studies of wireless phone users. The CRADA will also include a

broad assessment of additional research needs in the context of the latest

research developments around the world.

7. How can I find out how much radiofrequency energy

exposure I can get by using my wireless phone?

All phones sold in the United States must comply with Federal

Communications Commission (FCC) guidelines that limit radiofrequency

Additional safety information

122

energy (RF) exposures. FCC established these guidelines in consultation with

FDA and the other federal health and safety agencies. The FCC limit for RF

exposure from wireless telephones is set at a Specific Absorption Rate (SAR)

of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the

safety standards developed by the Institute of Electrical and Electronic

Engineering (IEEE) and the National Council on Radiation Protection and

Measurement. The exposure limit takes into consideration the body’s ability

to remove heat from the tissues that absorb energy from the wireless phone

and is set well below levels known to have effects.

Manufacturers of wireless phones must report the RF exposure level for each

model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/

rfsafety) gives directions for locating the FCC identification number on your

phone so you can find your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy

coming from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a

technical standard for measuring the radiofrequency energy (RF) exposure

from wireless phones and other wireless handsets with the participation and

leadership of FDA scientists and engineers. The standard, Recommended

Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in

the Human Body Due to Wireless Communications Devices: Experimental

Techniques, sets forth the first consistent test methodology for measuring

the rate at which RF is deposited in the heads of wireless phone users. The

test method uses a tissue-simulating model of the human head. Standardized

SAR test methodology is expected to greatly improve the consistency of

measurements made at different laboratories on the same phone. SAR is the

measurement of the amount of energy absorbed in tissue, either by the whole

body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of

matter. This measurement is used to determine whether a wireless phone

complies with safety guidelines.

Additional safety information

123

9. What steps can I take to reduce my exposure to

radiofrequency energy from my wireless phone?

If there is a risk from these products—and at this point we do not know that

there is—it is probably very small. But if you are concerned about avoiding

even potential risks, you can take a few simple steps to minimize your

exposure to radiofrequency energy (RF). Since time is a key factor in how

much exposure a person receives, reducing the amount of time spent using a

wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you

could place more distance between your body and the source of the RF, since

the exposure level drops off dramatically with distance. For example, you

could use a headset and carry the wireless phone away from your body or use

a wireless phone connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are

harmful. But if you are concerned about the RF exposure from these products,

you can use measures like those described above to reduce your RF exposure

from wireless phone use.

10.What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones,

including children and teenagers. If you want to take steps to lower exposure

to radiofrequency energy (RF), the measures described above would apply to

children and teenagers using wireless phones. Reducing the time of wireless

phone use and increasing the distance between the user and the RF source

will reduce RF exposure.Some groups sponsored by other national

governments have advised that children be discouraged from using wireless

phones at all. For example, the government in the United Kingdom distributed

leaflets containing such a recommendation in December 2000. They noted

that no evidence exists that using a wireless phone causes brain tumors or

other ill effects. Their recommendation to limit wireless phone use by children

was strictly precautionary; it was not based on scientific evidence that any

health hazard exists.

Additional safety information

124

11.What about wireless phone interference with medical

equipment?

Radiofrequency energy (RF) from wireless phones can interact with some

electronic devices. For this reason, FDA helped develop a detailed test method

to measure electromagnetic interference (EMI) of implanted cardiac

pacemakers and defibrillators from wireless telephones. This test method is

now part of a standard sponsored by the Association for the Advancement of

Medical instrumentation (AAMI). The final draft, a joint effort by FDA,

medical device manufacturers, and many other groups, was completed in late

2000. This standard will allow manufacturers to ensure that cardiac

pacemakers and defibrillators are safe from wireless phone EMI. FDA has

tested hearing aids for interference from handheld wireless phones and

helped develop a voluntary standard sponsored by the Institute of Electrical

and Electronic Engineers (IEEE). This standard specifies test methods and

performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and a

accompanied hearing aid at the same time. This standard was approved by

the IEEE in 2000.FDA continues to monitor the use of wireless phones for

possible interactions with other medical devices. Should harmful interference

be found to occur, FDA will conduct testing to assess the interference and

work to resolve the problem.

12.Where can I find additional information?

For additional information, please refer to the following resources:

• FDA Web page on wireless phones

http://www.fda.gov/cdrh/phones/index.html

• Federal Communications Commission (FCC) RF Safety Program

http://www.fcc.gov/oet/rfsafety

• International Commission on Non-Ionizing Radiation Protection

http://www.icnirp.de

• World Health Organization (WHO) International EMF Project

http://www.who.int/emf

• National Radiological Protection Board (UK)

http://www.nrpb.org.uk/

Additional safety information

125

July 18, 2001For updates: http://www.fda.gov/cdrh/phones

Microsoft RM-60 Dual Band Cellular Phone User Manual Axis 6235 i MTVSN 923598v1 030305x1

Microsoft Mobile Oy Dual Band Cellular Phone Axis 6235 i MTVSN 923598v1 030305x1

Contents

Manual

Navigation menu

Namespaces

Views

Navigation