Microsoft RM-66 CDMA 800/1900 Cellular Phone w/BT User Manual 6265x ENv1 FCC Draft noHAC

Download:
Mirror Download [FCC.gov]
Document ID	580780
Application ID	0+rVZyKxlQM5WXZjpH8GVw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.62kB (945251 bits)
Date Submitted	2005-09-12 00:00:00
Date Available	2005-09-12 00:00:00
Creation Date	2005-08-18 11:15:46
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-08-18 11:15:46
Document Title	6265x.ENv1_FCC_Draft_noHAC.fm
Document Creator	PScript5.dll Version 5.2.2
Document Author:	daniyoun

Nokia 6265 or Nokia 6265i
FCC DRAFT
FCC DRAFT ONLY
Part No. 9243340 , Issue No. 1
Copyright ©2005 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 6265 or Nokia 6265i, Pop-Port, and the Nokia
Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation.
Other company and product names mentioned herein may be trademarks or trade names of
their respective owners.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
©1999-2004. Tegic Communications, Inc. All rights reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information contained in this user guide was written for the Nokia 6265 or Nokia 6265i
product. Nokia operates a policy of ongoing development. Nokia reserves the right to make
changes to any of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR
INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT
ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO
REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR
NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using
your telephone if such interference cannot be eliminated. If you require assistance, contact
your local service facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful interference.
FCC DRAFT ONLY
Contents
Contents
For your safety............................................................................................... 6
Welcome.......................................................................................................... 9
1. Phone at a glance .................................................................................. 11
2. Set up your phone.................................................................................. 17
3. Text entry ................................................................................................. 25
4. Messaging ................................................................................................ 28
5. Log.............................................................................................................. 46
6. Contacts.................................................................................................... 50
7. Camera ...................................................................................................... 59
8. Gallery ....................................................................................................... 65
9. Media......................................................................................................... 68
10.Settings.................................................................................................... 74
11.Organizer.............................................................................................. 102
12.Mobile web.......................................................................................... 116
13.Extras..................................................................................................... 119
14.PC connectivity................................................................................... 120
15.Enhancements .................................................................................... 121
16.Reference information ..................................................................... 123
Care and maintenance ........................................................................... 126
Additional safety information.............................................................. 127
Index............................................................................................................ 132
FCC DRAFT ONLY
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
Switch on safely
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Road safety comes first
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
Interference
All wireless phones may be susceptible to interference, which could
affect performance.
Switch off in hospitals
Follow any restrictions. Switch the phone off near medical
equipment.
Switch off in aircraft
Follow any restrictions. Wireless devices can cause interference in
aircraft.
Switch off when refueling
Do not use the phone at a refueling point. Do not use near fuel or
chemicals.
Switch off near blasting
Follow any restrictions. Do not use the phone where blasting is in
progress.
Use sensibly
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
Qualified service
Only qualified personnel may install or repair this product.
FCC DRAFT ONLY
For your safety
Enhancements and batteries
Use only approved enhancements and batteries. Do not connect
incompatible products.
Water-resistance
Your phone is not water-resistant. Keep it dry.
Backup copies
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
Connecting to other devices
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
Emergency calls
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for use on the CDMA 800
and 1900, AMPS 800, and GPS networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local
customs as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These network services may not be available on all networks or you may
have to make specific arrangements with your service provider before you can
utilize network services. Your service provider may need to give you additional
instructions for their use and explain what charges will apply. Some networks
FCC DRAFT ONLY
For your safety
may have limitations that affect how you can use network services. For instance,
some networks may not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as Mobile web require network
support for these technologies.
Shared memory
The following features in this device may share memory: Messaging, Contacts,
Gallery, Organizer, and Extras. Use of one or more of these features may reduce
the memory available for the remaining features sharing memory. For example,
saving many photos to the Gallery may use all of the available memory. Your
device may display a message that the memory is full when you try to use a
shared memory feature. In this case, delete some of the information or entries
stored in the shared memory features before continuing. Some of the features,
such as Messaging and Contacts, may have a certain amount of memory specially
allotted to them in addition to the memory shared with other features.
FCC DRAFT ONLY
Welcome
Welcome
Congratulations on your purchase of the Nokia 6265 or Nokia 6265i mobile
phone. Your phone provides many functions which are practical for daily use,
such as a handsfree loudspeaker, alarm clock, calculator, calendar, and more.
Your phone can also connect to a PC, laptop, or other device using a USB data
cable, Bluetooth, or infrared.
■ Register your phone
Make sure to register your phone at www.warranty.nokiausa.com or call
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
you should call a customer center or to have your phone repaired.
■ Getting help
Find your phone label
If you need help, Nokia Care is
available for assistance. Before
calling, we recommend that you
write down the following
information and have it available:
• Electronic serial number (ESN)
• Your zip code (only in the US)
The ESN is found on the type label, which is located beneath the battery on the
back of the phone. See "Remove the back cover," p. 18 and "Remove the battery,"
p. 18 for more information.
FCC DRAFT ONLY
Welcome
Nokia support and contact information
Check www.nokia.com/support or your local Nokia Web site for the latest version
of this guide, additional information, downloads, and services related to your
Nokia product.
On the Web site, you can get information on the use of Nokia products and
services. If you need to contact customer service, check the list of local Nokia
Care contact centers at www.nokia.com/customerservice.
For maintenance services, check your nearest Nokia Care services location at
www.nokia.com/repair.
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at
www.nokiaaccessibility.com.
10
FCC DRAFT ONLY
Phone at a glance
1. Phone at a glance
■ Keys and parts
Mini SD card slot (1)
Earpiece (2)
Display (3)
Headset connector (4)
Light sensor (5)
Left selection key (6)
Right selection key (7)
Call key (8)
End and power key (9)
Infrared (10)
Strap holder (11)
Center selection and scroll key (12)
Keypad (13)
Microphone (14)
Charger port (15)
Pop-Port™ connector (16)
Camera key (17)
Camera flash and self-portrait mirror (18)
Loudspeaker (19)
Volume key (20)
Camera lens (21)
FCC DRAFT ONLY
11
Phone at a glance
■ Standby mode
Depending on your wireless service provider and the model number of your
phone, some or all of the following selection keys may appear in the standby
mode.
The standby mode is home base and
indicates your phone is idle.
Signal strength (1)—A higher bar
indicates a stronger network signal.
Menu (2)—Press the center
selection key to select this option.
Go to (3)—Press the left selection
key to select this option.
Names or network operator menu
(4)—Press the right selection key to
select this option.
Battery level (5)—A filled in battery
indicates more power in the phone.
■ Quick keys
Depending on your wireless service provider and the model number of your
phone, some or all of the following scroll key shortcuts may be available in the
standby mode.
In the standby mode, the four-way scroll and center selection keys instantly take
you to frequently-accessed menus:
Scroll up key—Go to the contacts list or network operator menu.
Scroll right key—View the calendar.
Scroll down key—Go to the contacts list.
Scroll left key—Create a text message.
Center selection key—Selects highlighted menus and submenus.
■ Indicators and icons
Depending on your wireless service provider and the model number of your
phone, some or all of the following indicators and icons may appear on the start
screen.
12
FCC DRAFT ONLY
Phone at a glance
Icon
Indicates...
You have one or more text or picture messages. See "Read
and reply to text messages," p. 30.
You have one or more voice messages. See "Voice
messages," p. 43.
Your phone keypad is locked. See "Keyguard," p. 24.
Your phone is set to the silent profile. See "Profiles," p. 74.
The alarm clock is on. See "Alarm clock," p. 102.
The countdown timer is running. See "Countdown timer,"
p. 112.
The stopwatch timing is running in the background. See
"Stopwatch," p. 113.
Integrated hands-free is active.
The timed profile is selected. See "Profiles," p. 74.
Phone can be connected to a Bluetooth device. See
"Bluetooth connectivity," p. 87.
, or
or
An enhancement, such as headset, handsfree, hearing aid,
TTT/TTD, or Loopset is active or connected. See
"Enhancements," p. 93.
Voice privacy encryption is active (or is not active) in the
network.
Phone is roaming outside of your home network.
Phone is in a digital network. See "Network services," p. 7.
Phone is in a 1XRTT network. See "Network services," p. 7.
FCC DRAFT ONLY
13
Phone at a glance
■ Phone menus
Phone features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customise your phone features. You can access these
menus and submenus by using the scroll method or by using a shortcut.
Note: Some features may not be available, depending on your network.
For more information, contact your wireless provider.
Scroll method
1. In the standby mode, select Menu using the center selection
key. Scroll through the main menu using the scroll key.
As you scroll through the menus, the menu number appears
in the upper right corner of the display. Below the number is
a scroll bar with a tab that moves up or down on the right side of the display
screen as you scroll through the menus, providing a visual representation of
your current position in the menu structure.
2. When you arrive at a menu, press Select (the center selection key) to enter
submenus.
Select Back from the submenu level to return to the previous menu.
Press the end key to return to the standby mode from any menu or submenu.
Main menu display
You can control whether your phone main menu is displayed as a List or Grid. By
default, the main menu displays in Grid format.
In the standby mode, select Menu > Options > Main menu view > List, Grid, or
Grid with labels.
You can also change the order of menus in your main menu.
In the standby mode, select Menu > Options > Organize. Highlight a menu, select
Move. Use the scroll key to move the menu to a new location, select OK. You can
repeat this procedure to customize your main menu.
14
FCC DRAFT ONLY
Phone at a glance
In-phone help
Many features have brief descriptions (help text) that can be viewed on the
display. To view these descriptions, scroll to a feature, and wait for about 15
seconds. Scroll down to view all of the description, or select Back to exit.
In order to view the descriptions, you must activate help text.
In the standby mode, select Menu > Settings > Phone > Help text activation >
On or Off.
■ Security functions
The security feature protect your device from unauthorized outgoing calls or
access to the stored information with lock and security codes. The lock code is a
four-digit number, while the security feature is a five-digit number. By default,
the security feature uses the lock code (defaulted to the last four digits of your
phone number), instead of the security code to protect your phone.
You must enter your lock code to access the Security menu.
To access the Security menu, do the following:
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK. See "Security," p. 95 for more information.
Note: Depending on your wireless service provider, the preset lock code
may be 1234 or 0000 instead of the last four digits of your phone
number. If none of these work, contact your wireless service provider for
more help.
You must enter the lock code to Restore factory sett., do the following:
1. In the standby mode, select Menu > Settings > Restore factory sett.
2. Enter the lock code, and select OK.
Note: Depending on your wireless service provider, your phone may ask
for the security code (defaulted to 12345) instead of the lock code.
■ ’Go to’ functions
The Go to menu allows you to change the function of the left selection key on
your phone so that your most frequently used functions can be quickly accessed
from the Go to menu in the standby mode.
FCC DRAFT ONLY
15
Phone at a glance
Select options
1. In the standby mode, select Go to > Options > Select options.
2. Scroll to the options you want to add.
3. Select Mark to add an option or Unmark to remove an option.
4. Select Done when you have added all desired options.
5. Select Yes to save the changes.
6. In the standby mode, select Go to to display a list of the options that you
selected in step 3.
Organize functions
In the standby mode, select Go to > Options > Organize. Highlight an option,
select Move. Use the scroll key to move the option to a new location, select OK.
You can repeat this procedure to customize your Go to menu.
Select Done > Yes to save the changes.
16
FCC DRAFT ONLY
Set up your phone
2. Set up your phone
■ Antenna
Your device has an internal antenna.
Hold the device as you would any other telephone
with the antenna area pointed up and over your
shoulder.
Note: As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the device is switched on.
Contact with the antenna affects call quality
and may cause the device to operate at a
higher power level than otherwise needed.
Avoiding contact with the antenna area when
operating the device optimizes the antenna
performance and the battery life.
■ Battery
Always switch off the power and disconnect the charger before removing the
battery.
Avoid touching electronic components while changing the covers. Always store
and use the device with the covers attached.
Prolonged, continuous use of your device may increase the device temperature.
The increased temperature is a normal function of this product and does not pose
a safety concern for you or the device. If the temperature is uncomfortable to
you, use a headset or allow your device to return to room temperature before
your next call.
FCC DRAFT ONLY
17
Set up your phone
Remove the back cover
1. With the back of the phone
facing you, press the back
cover latch down.
2. Slide the back cover toward the
bottom of the phone, lift up
and remove.
Remove the battery
After you have removed the back
cover, insert your finger into the
finger grip, and lift the battery
from its compartment.
UIM (CDMA SIM) card slot
Your phone has a UIM card slot built into the mechanics. However, the UIM is not
functional in this phone model. Avoid placing anything into the UIM card slot.
Replace the battery
1. Insert the battery, goldcoloured contact end first, into
the battery slot.
2. Push down on the other end of
the battery to snap the battery
into place.
18
FCC DRAFT ONLY
Set up your phone
Replace the back cover
1. Set the back cover on the
phone with the cover tabs
aligned with the slots in the
phone.
2. Press the back cover latch
down and slide the back cover
toward the top of phone .
3. Make sure back cover latch is
secure.
Charge the battery
1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger output plug
into the round jack at the
bottom end of the phone.
If necessary, you can use CA44 adapter to connect a
charger and the phone.
After a few seconds, the
battery indicator in the
display starts to scroll from
bottom to top. If the battery is
completely discharged, it may
take a few minutes before the
charging indicator appears on
the display or before any calls
can be made.
FCC DRAFT ONLY
19
Set up your phone
■ Mini SD card
To insert the mini SD, complete the following steps.
1. Slide open the phone and lift open the mini SD
slot cover.
2. Insert card firmly as shown in the illustration.
The card clicks into place.
To remove mini SD card, firmly press the card until it
releases from card slot and slides out.
■ Turn your phone on or off
1. To turn your phone on or off, press and hold the
end key for at least 3 seconds.
2. Enter the lock code, if necessary, and select OK.
■ Connect the headset
A compatible headset, such as HS-5, may
be purchased with your phone or
separately as an enhancement. See
"Enhancements," p. 93 for information.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
end of your phone.
appears on
the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
• Use the keypad to enter numbers.
• Press the call key to place a call.
• Press the end key to end a call.
20
FCC DRAFT ONLY
Set up your phone
You can also plug a compatible mono or stereo headset, such as the HS-9
Universal Headset, into the into the 2.5 mm headset jack on the side of your
phone to allow hands-free operation. See "Enhancements," p. 93.
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your
safety.
■ Make calls
Using the keypad
1. Enter the phone number (including the area code), and press the call key.
To delete a character to the left of the cursor, select Clear.
2. To end the call, press the end key. To cancel the call attempt, select End call.
Use the save contact option
1. In the standby mode, enter the phone number (including the area code) and
select Save, enter a name for the contact, and select OK.
2. To make the call, press the call key. To return to standby mode, select Done.
Use the contacts list
1. In the standby mode, scroll down to display your contacts.
2. Scroll to the contact you wish to dial, press the call key. To view details of the
entry, select Details.
Use the last dialed number
1. In the standby mode, press the call key to display the last 20 numbers dialed.
2. Scroll to the number or name you wish to redial, and press the call key.
Make a conference call
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > New call.
FCC DRAFT ONLY
21
Set up your phone
3. Enter the phone number of the second participant. To retrieve a number from
your contacts, select Search.
4. Select Call. The first participant is put on hold.
5. When the second participant picks up, press the call key to connect the calls.
6. To end the conference call, select Options > End all calls, or press the end key.
Carrier selection provisioning (CSP)
CSP functionality enables you to choose a preferred long distance carrier by
entering a carrier code. The carrier code default value is null. See "Preferred
carrier," p. 82.
Note: CSP function affects only long distance and international calls.
With CSP function on, you cannot set call restrictions to block or allow
numbers for incoming or outgoing calls.
If CSP is active, a 2-digit preferred carrier code is displayed with the first digit of
the phone number entered. This code appears after you press the call key and
before you make the call.
1. Enter the long distance or international number you want to call, press the
call key and verify that the 2-digit CSP code appears after the first digit of the
number entered.
2. Determine whether you want to turn the CSP function on or off. If you select
On, you will be prompted to change or enter the CSP code. If you select Off,
the CSP code will remain the same.
■ Answer calls
Answer or silence an incoming call
1. To answer the call, press the call key or select Answer.
2. To reject the call, press the end key.
Select Silence to mute the ringing tone. Select Dismiss or do nothing, and the
call is eventually forwarded to voice mail.
If your phone is set to Silent in the Profiles menu, select Dismiss, and the call
is forwarded to voice mail.
22
FCC DRAFT ONLY
Set up your phone
Adjust the earpiece volume
Press the up arrow or down arrow on the volume key located on the right side of
your phone to adjust the volume of the earpiece.
When adjusting the volume, a bar chart appears in the display indicating the
volume level.
Answer a call with the keypad locked
To answer a call with the keypad locked, simply press the call key.
During the call, all features function as normal. When you end or reject the call,
the keypad automatically re-locks. See "Keyguard," p. 24 for details.
When the device is locked, calls may be possible to the official emergency
number programmed into your device.
Use the loudspeaker
Warning: Do not hold the device near your ear when the loudspeaker is
in use because the volume may be extremely loud.
You can use your phone loudspeaker during a call:
• To activate the loudspeaker, select Loudsp.
• To deactivate the loudspeaker, select Normal.
The loudspeaker is deactivated automatically when a call or a call attempt ends
or when certain enhancements are connected.
Mute phone during call
You can mute your phone during a call:
• To mute your phone, select Mute.
• To unmute the phone, select Unmute.
Options during a call
Many of the options that you can use during a call, are network services. Check
with your wireless service provider for more information.
During a call, select Options and one of the following:
Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.
FCC DRAFT ONLY
23
Set up your phone
New call—Initiate a conference call. See "Make a conference call," p. 21 for
information.
Save—Save a number entered during a call.
Add to contact—Add a number entered during a call to a contact in your list.
End all calls—Disconnect from all active calls.
Touch tones—Enter the numbers, and select Tones to send the numbers as tones.
Contacts—View the contacts list.
Menu—View the phone menu.
■ Keyguard
With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally. Remember to lock your phone keypad to prevent accidental calls. If
the keypad is locked, it unlocks when you receive a call. After the call, the lock
automatically reactivates.
When the keyguard is on, calls may be possible to the official emergency number
programmed into your device.
To lock the keypad, do either of the following:
• Select Menu, and press * within 2 seconds.
• Close the slide and select Lock.
To unlock the key, do either of the following:
• When the slide is closed, select Unlock > OK or open the slide.
• When the slide is open, select Unlock, and press * within 2 seconds.
24
FCC DRAFT ONLY
Text entry
3. Text entry
You can use two methods for entering text and numbers: standard mode and
predictive text mode.
■ Standard mode
Standard mode is the only way to enter text into the contacts list, and to rename
caller groups.
Text (Abc)
• Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted and
your phone awaits the next entry.
• Press 0 to enter a space, thereby accepting a completed word.
• Press 1 as many times as necessary to scroll through a list of commonly used
characters.
• Press * to display a complete list of special characters.
• Press and hold # to access Editor settings > Number mode, Dictionary on or
Dictionary off, or Writing language.
Numbers (123)
To switch to 123 mode from Abc mode:
1. Press and hold #.
2. At the Editor settings menu list, select Number mode.
The phone will return to the message entry screen and switch the ABC icon in the
upper left corner of the display to the 123 icon.
Change language
To change the language, do the following:
1. Press and hold #.
FCC DRAFT ONLY
25
Text entry
2. At the Editor settings menu list, select Writing language, and the new
language.
The phone will return to the message entry screen, and you can compose in the
new language.
Punctuation and special characters
While at any text entry screen, press * to display special characters (press and
hold * if predictive text is on). Press * again to cycle through all available
characters. Scroll to navigate through the list of special characters. Once a
character is highlighted, select Insert to insert the character into your message.
■ Predictive text mode
Predictive text input allows you to write messages quickly using your keypad and
the built-in dictionary. It is much faster than the standard mode method,
because for each letter, you only press the corresponding key on your keypad
once.
Activate and deactivate
At any text entry screen, select and hold Options to turn predictive text on or off
depending on previous mode; or, select Options > Dictionary on or Dictionary off.
Enter text
The illustration below simulates your display each time a key is pressed. For
example, to write Nokia with predictive text on and with the English dictionary
selected, press each of the following keys once:
• Press 0 to enter a space and begin writing the next word.
• If a displayed word is not correct, press * to see other matches. To return to
the previous word in the list of matches, select Previous.
• If ? appears after a word, it is not in the dictionary. Select Spell to add the
word to the dictionary.
26
FCC DRAFT ONLY
Text entry
• Press 1 to insert a period into your message.
• Press and hold * to display special characters. Press * again to cycle through
all available characters.
• Press and hold the specific number key to enter a number.
• Press and hold # to access Editor settings > Number mode, Dictionary on or
Dictionary off, or Writing language.
■ Change case and mode
Press # to switch between uppercase, lowercase, and sentence case, as well as
standard and predictive text modes. Case and mode are indicated by the
following icons that appear in the upper left of the display screen.
Uppercase text: standard mode is on.
Lowercase text: standard mode is on.
Sentence case text: standard mode is on. Only available at the
beginning of a sentence.
Uppercase text: predictive text is on.
Lowercase text: predictive text is on.
Sentence case text: predictive text is on. Only available at the
beginning of a sentence.
■ Delete text
To delete text, use one of the following options:
• Select Clear to backspace the cursor and delete a character.
• Select and hold Clear to backspace continuously and delete characters.
FCC DRAFT ONLY
27
Messaging
4. Messaging
Your phone is capable of creating and receiving text, multimedia, voice and
minibrowser messages. Check with your service provider to see what messaging
is available for you.
■ Text messages
Text messaging is a network service. See "Network services," p. 7 for more
information. If your wireless service provider supports this feature, you can send
and receive text messages to compatible phones that are also subscribed to the
service.
When composing text messages, check the number of characters allowed in the
top right corner of the message. Using special (unicode) characters takes up more
space. If there are special characters in your message, the indicator may not show
the message length correctly. Before the message is sent, the phone will tell you
if the message exceeds the maximum length allowed for one message. Also, you
can make distribution lists that contain phone numbers and names from your
contact list. See "Distribution lists," p. 42 for more information.
Note: When sending messages, your device may display Message sent.
This is an indication that the message has been sent by your device to the
message center number programmed into your device. This is not an
indication that the message has been received at the intended
destination. For more details about messaging services, check with your
service provider.
Text message folders and options
In the standby mode, select Menu > Messaging > Text messages and from the
following:
Create message—Create and send messages.
Inbox—Check for received text messages. Text messages are automatically stored
in the Inbox when they are received. A notification appears when a message
arrives in the Inbox.
Outbox—Check for outgoing text messages. Text messages are automatically
stored in the Outbox as they are sent. If your service is interrupted while sending,
the text message is stored in the Outbox until another delivery attempt is made.
28
FCC DRAFT ONLY
Messaging
Sent items—Sent text messages are stored in Sent items.
Drafts—Save incomplete text messages in a draft. Store drafts of text messages
in Drafts to be completed at a later time.
Archive—Save text messages in Archive.
Templates—Select from a collection of prewritten Templates, when creating text
messages. Preloaded Templates can be edited and customized.
My folders—Create and name personal folders.
Delete messages—Delete messages from a selected folder or all folders.
Message settings—Change settings for reading, writing, and sending text
messages.
Send numeric page—Send a numeric page.
Add-ins—Access the library of sound, picture and animation objects. This is only
available with enhanced text messages.
Write and send text messages
1. In the standby mode, select Menu >
Messaging > Text messages > Create
message.
To go quickly to the Create message
screen, scroll left in the standby mode.
2. Compose a text message using the keypad.
See "Choose a text message option," p. 30
for composing options.
3. Select Send to > Recently used, Send to
number, Send to e-mail, Send to many, or
Send to distribution list (if you have
created one).
4. Select a number or distribution list, enter the recipient’s phone number or email address, or select Search to retrieve a number or e-mail address from
your contacts list; select Send.
FCC DRAFT ONLY
29
Messaging
Use a template
Templates are short, prewritten messages that can be retrieved and inserted into
new text messages.
1. In the standby mode, select Menu > Messaging > Text messages > Create
message > Options > Use template.
2. Select one of the available templates and complete the text message using
the keypad.
Read and reply to text messages
When you receive a text message, a notification appears and the unopened letter
icon (
) is displayed.
1. Select Show to read the text message or Exit to dismiss the notification.
Scroll to view the whole message, if necessary.
When unopened messages are in your inbox,
is shown in the upper left
corner during standby mode as a reminder.
2. Select Reply > Empty screen, Original text, Template, or one of the predefined
answers provided.
3. Compose your reply with the keypad, and select Send.
Choose a text message option
Create message options
When you create or reply to a text message, depending on the mode of text input
you are using and the features supported by your wireless service provider, some
or all of the following are available:
Sending options—Mark or Unmark a message as Urgent, Delivery note, Callback
number, or Signature.
Clear text—Erases all text from your message.
Add-ins > Sound, Animation, or Picture—If your are sending an enhanced text
message, insert a sound clip, animation clip, picture from your Gallery.
Styles > Font type, Font size, or Text alignment—If your are sending an enhanced
text message, modify the text of the message.
Insert contact—Insert detail from your contacts list into your message.
30
FCC DRAFT ONLY
Messaging
Insert number—Insert a phone number or find a phone number in the contacts
list.
Save—Save the message in Drafts.
Exit editor—Exits the message editor.
Use template—Insert a predefined template.
Insert smiley—Insert a smiley.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This displays only when predictive text is
on.
Insert symbol—Insert a special character. This displays only when predictive text
is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This displays only when predictive text is on.
Read message options
When you read a text message, the following options are available:
Delete—Discard the text message.
Message details—View the details of the text message.
Use detail > Number, E-mail address, or Web address—Select Save to create a
new contact; select Options > Add to contact, Send message, or Call for other
options.
Move—Save the message to Archive, Templates, or a folder you have created.
Forward—Forward the text message to another phone number.
Lock or Unlock—Lock or unlock the text message. The appropriate option appears.
Rename—Edit the title of the text message.
Save picture—Save the picture to Archive, Templates, or a folder you have
created. Option only appears with a picture text message.
List objects—List the sound clips, animation clips, and pictures associated with
message. Option only appears when you highlight a sound clip in an enhanced
text message.
Play sound—Play the sound clip. Option only appears when you highlight a sound
clip in an enhanced text message.
FCC DRAFT ONLY
31
Messaging
Save sound—Save a sound clip to your Ringing tones, Add-ins, or Gallery. Option
only appears when you highlight a sound clip in an enhanced text message.
Save picture—Save the picture to your Add-ins or Gallery. Option only appears
when you highlight a picture in an enhanced text message.
Save animation—Save the animation clip to your Add-ins or Gallery. Option only
appears when you highlight a animation clip in an enhanced text message.
Business card—Show the business card. Option only appears when you highlight
a vCard object in an enhanced text message.
Calendar note—Show the calendar note. Option only appears when you highlight
a VCalendar object in an enhanced text message.
Use custom folders
Your phone has a folder system that saves and stores text messages. Additionally
you can create custom folders.
Create a custom folder
To organize your messages, create custom folders and save messages you want to
keep there.
1. In the standby mode, select Menu > Messaging > Text messages > My
folders > Add fldr. to create your initial custom folder.
Select Menu > Messaging > Text messages > My folders > Options > Add
folder to create an additional custom folder.
2. Enter a name for the new folder, and select OK.
Rename a custom folder
1. In the standby mode, select Menu > Messaging > Text messages > My
folders.
2. Folders you have created appear in the display. Scroll to the folder you wish to
rename, and select Options > Rename folder.
3. Select and hold Clear to delete the existing entry; enter a new name for the
folder; select OK to confirm or Back to exit.
Delete a custom folder
Only folders in My folders can be deleted. The Inbox, Outbox, Sent items, Drafts,
Archive, and Templates folders are protected. When you delete a folder, all
messages in the folder are also deleted.
32
FCC DRAFT ONLY
Messaging
1. In the standby mode, select Menu > Messaging > Text messages > My
folders.
2. Scroll to the folder you wish to delete, and select Options > Delete folder.
3. Select Yes to delete or No to exit.
Delete text messages
If your message memory is full and you have more text messages waiting at the
network,
blinks in standby mode. You can do the following:
• Read some of the unread text messages, and delete them.
• Delete text messages from some of your folders.
Delete a single text message
To delete a single text message, you need to open it first.
1. In the standby mode, select Menu > Messaging > Text messages.
2. Select the folder containing the text message you wish to delete.
3. Select the message you wish to delete and Options > Delete.
4. Select Yes to delete the message or No to exit.
Delete all messages in a folder
1. In the standby mode, select Menu > Messaging > Text messages > Delete
messages and one of the following:
All—Deletes all text messages in the folder.
All read—Deletes only the read text messages in the folder.
All unread—Deletes all unread text messages in the Inbox.
2. If you select All or All read, select Mark or Unmark to choose the folders from
which to delete text messages. Select Options > Mark all to choose all folders.
3. Select Done after choosing the folders.
4. Select Yes to delete the message or No to exit.
Text message settings
Sending options
In the standby mode, select Menu > Messaging > Text messages > Message
settings > Sending options and the setting you wish to change:
FCC DRAFT ONLY
33
Messaging
Priority > Normal or Urgent—Select the priority of the message.
Delivery note—Select On to receive a note confirming delivery of a text message.
Send callback number—Select On to send your default phone to the recipient.
Signature—Select On to append a signature to an outgoing text message. If you
have not created a signature, select On; enter a signature; and select OK.
Other settings
In the standby mode, select Menu > Messaging > Text messages > Message
settings > Other settings and the setting you wish to change:
Message font size >Small font or Large font—Set font size on the display.
Message overwriting > Sent items only, Inbox only, Sent items & Inbox, or Off—
Set your phone to automatically replace old messages in Inbox or Sent items
when new ones arrive. When the message memory is full, your phone cannot
send or receive any new messages.
Save sent messages—Select Always save or Always prompt to save sent text
messages to Sent items. Select Off to not save messages.
Auto-playback of sounds—If you have enhanced text messaging, select On or Off
to control sound clips.
Queue msgs. if no digital—Select On or On prompt to store text messages in the
Outbox until they can be sent with a digital service. Select Off to not store
messages.
■ Multimedia messages
Multimedia messaging is a network service. See "Network services," p. 7 for more
information. If your wireless service provider supports this feature, you can send
and receive multimedia messages to compatible phones that are also subscribed
to the service.
A multimedia message can contain text, sound, and a picture. Or a multimedia
message can contain a video clip. Your phone supports multimedia messages that
are up to 600 KB. If the maximum size is exceeded, the phone may not be able to
receive the message.
Note: Only devices that have compatible features can receive and
display multimedia messages. The appearance of a message may vary
depending on the receiving device.
Depending upon your network, you may receive a message that includes an
Internet address where you can go to view the multimedia message. Pictures are
34
FCC DRAFT ONLY
Messaging
scaled to fit the display area of the phone. Your phone has a multimedia message
viewer for playing messages and a multimedia inbox for storing saved messages.
Once you save the multimedia message, you can use the image as a screen saver
or the sound as a ringing tone.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
Multimedia messaging only supports the following formats:
• Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG
• Sound: MP3, eAAC+, SP-MIDI, AMR audio, QCELP, and monophonic ringing
tones
• Video: clips in H.264 format with QCIF image size and AMR audio
You cannot receive multimedia messages if you have a call in progress, games or
other applications running, or an active browsing session. Because delivery of
multimedia messages can fail for a variety of reasons, do not rely solely upon
them for essential communications.
Multimedia message folders and options
In the standby mode, select Menu > Messaging > Multimedia msgs. and from the
following:
Create message—Create and send multimedia messages.
Inbox—Check for received multimedia messages. Multimedia messages are
automatically stored in the Inbox when they are received. You receive a
notification when a message arrives in your Inbox.
Outbox—Check for outgoing multimedia messages. Multimedia messages are
automatically stored in the Outbox as they are sent. If your service is interrupted
while sending, then messages are stored in the Outbox until another delivery
attempt is made.
Sent items—Sent multimedia messages are stored in Sent items.
Saved items—Save multimedia messages for later use in Saved items.
Delete messages—Delete multimedia messages from the Inbox, Outbox, Sent
items, or Saved items.
Message settings—Change the settings for multimedia messages.
FCC DRAFT ONLY
35
Messaging
Write and send multimedia messages
1. In the standby mode, select Menu >
Messaging > Multimedia msgs. > Create
message.
2. Compose a message using the keypad.
See "Choose a multimedia message
option," p. 37 for composing options.
3. Select Send to > Recently used, To phone
number, To e-mail address, Many, or
Distribution lists.
4. Select a number or distribution list, enter
the recipient’s phone number or e-mail
address, or select Search to retrieve a
number or e-mail address from your contacts list; select Send.
The multimedia message is moved to the Outbox for sending.
The wireless network may limit the size of multimedia messages. If the inserted
picture exceeds this limit, the device may make it smaller so that it can be sent by
multimedia messaging.
It takes more time to send a multimedia message than to send a text message.
While the multimedia message is being sent, the animated indicator
is
displayed and you can use other functions on the phone. If there is an
interruption while the message is being sent, the phone automatically tries to
resend it a few times. If this fails, the message remains in the Outbox and you can
try to manually resend it later. Check your Outbox for unsent messages.
Note: When sending messages, your device may display the words
Multimedia message sent. This is an indication that the message has
been sent by your device to the message center number programmed
into your device. This is not an indication that the message has been
received at the intended destination. For more details about messaging
services, check with your service provider.
Messages that you have sent are saved in Sent items if the setting Save sent
messages is set to Yes. See "Multimedia message settings," p. 40. This is not an
indication that the message has been received at the intended destination.
36
FCC DRAFT ONLY
Messaging
Read and reply to multimedia messages
When a multimedia message is received,
appears in the display along with
the percentage display indicating the download progress. Once the message has
been fully downloaded,
and a notification appears in the display.
1. To view the multimedia message immediately, select Show.
To save the message to the inbox for later viewing, select Exit.
To view a saved message, select Menu > Messaging > Multimedia msgs. >
Inbox and the message you want to view.
While viewing a message, select Play to play the entire message
2. Select Reply or Options > Reply to all, and compose your reply.
3. Select Send.
If
blinks and Multimedia mem-ory full. View waiting message. appears in
the display, the memory for multimedia messages is full. To view the waiting
message, select Show. Before you can save the message, you need to delete some
of your old messages. See "Delete multimedia messages," p. 40 for more
information.
Important: Exercise caution when opening messages. Multimedia
message objects may contain malicious software or otherwise be
harmful to your device or PC.
Choose a multimedia message option
Create message options
When you create or reply to a multimedia message, depending on the mode of
text input you are using and the features supported by your wireless service
provider, some or all of the following options are available:
Send to album—Send message to an online album. This is an online network
service. Check with your service provider for more information.
Insert > Image, Sound clip, or Video clip—Insert an image, sound clip, or video clip
file from your Gallery. Open the desired folder, select the file and select Options >
Insert.
Copyright protections may prevent some images, ringing tones, and other
content from being copied, modified, transferred, or forwarded.
Insert > New image—Opens the camera to create a new image that you attach to
the message.
FCC DRAFT ONLY
37
Messaging
Insert > New sound clip—Opens the voice recorder to create a new sound clip
that you attach to the message.
Insert > Slide—Insert a slide into your message. Each slide can contain text,
business card, calendar note, one image, and one sound clip.
Insert > Business card—Insert contact as a business card.
Insert > Calendar note—Insert a calendar note.
Delete > Image, Sound clip, or Video clip—Delete an image, sound clip, or video
clip file from your message. Only appears when your message has a file
attachment.
Delete > Slide—Delete the current slide from your message.
Edit subject—Edit the subject heading.
Clear text—Erases all text from the current slide in your message.
Preview—Preview the message or slide presentation before sending it. Select Stop
to end the preview. Select Play to start the preview again or Back to return to the
list of options.
Previous slide—Move to the previous slide. Option only appears if there is a
previous slide.
Next slide—Move to the next slide. Option only appears if there is next slide.
Slide list—Shows a list of all slides. Select the slide you wish to edit.
Slide timing—Set the timing interval for each slide. By default, each slide appears
for 12 seconds.
Place text first or Place text last—Move text to the top or bottom of the slide. By
default, the text appears at the bottom or last.
Save—Saves the message to Saved items.
More options > Insert contact—Insert a name from your contacts list into your
message.
More options > Insert number—Insert a phone number or find a phone number in
the contacts list.
More options > Message details—Shows the details of your multimedia message.
Exit editor—Exits the message editor.
Insert smiley—Insert a smiley.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This displays only when predictive text is
on.
38
FCC DRAFT ONLY
Messaging
Insert symbol—Insert a special character. This displays only when predictive text
is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This displays only when predictive text is on.
Read message options
When you read a multimedia message, the following options are available:
Set contrast—Adjust the contrast of an image. This option is only available when
viewing an image.
Details—Displays the details of a highlighted file attachment.
Save image, Save sound clip, or Save video clip—Save the corresponding file to
the Gallery. Images, sound clips, and video clips must be opened before you can
save them.
Save link—Save the corresponding Web link. This displays only when a Web link is
highlighted.
View text—View only the text included in the message.
Open image, Open sound clip, or Open video clip—View or listen to the
corresponding file.
Open business card—Open an attached business card.
Open calendar note—Open an attached calendar note.
Delete—Delete the message you are viewing.
Reply or Reply to all—Enter a reply and send it to the original sender and any
other recipients of the message.
Use detail—Use a corresponding number or e-mail address. The number or e-mail
address must be highlighted
Forward to number, Forward to e-mail, or Forward to many—Forward the
message to a phone number, to an e-mail address, or to multiple recipients.
Forward to album—Forward the message to an online album. This is an online
network service. Check with your service provider for more information.
Message details—View the sender’s name and phone number, the message center
used, reception date and time, message size and type.
FCC DRAFT ONLY
39
Messaging
Delete multimedia messages
If your message memory is full and you have more multimedia messages waiting
at the network,
blinks during standby mode. You can do the following:
• Read some of the unread multimedia messages, and delete them.
• Delete multimedia messages from some of your folders.
Delete a single multimedia message
To delete a single multimedia message, you need to open it first.
1. In the standby mode, select Menu > Messaging > Multimedia msgs.
2. Select the folder containing the multimedia message you wish to delete.
3. Select the message you wish to delete and Options > Delete.
4. Select Yes to delete or No to exit.
Delete all multimedia messages in a folder
1. In the standby mode, select Menu > Messaging > Multimedia msgs. > Delete
messages > Inbox, Outbox, Sent items, or Saved items.
2. Select Yes to delete the all messages in the folder or No to exit.
Multimedia message settings
Save sent messages
You can save the multimedia messages that you send to the Sent items folder.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Save sent messages > No or Yes.
Delivery reports
You can request delivery reports to inform you if a message is delivered.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Delivery reports > On or Off
Scale image down
You can request for images to be automatically scaled down.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Scale image down > Yes or No.
40
FCC DRAFT ONLY
Messaging
Default slide timing
You can set the default time in mm:ss for the slides of a multimedia message.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Default slide timing, enter a slide time, and select OK.
Allow multimedia reception
Before you can use the multimedia message feature, you must specify whether
you want to receive message at all times or only if you are in the service
provider’s home system. This is a network service. Check with your service
provider for more information.
The default setting of the multimedia message service is generally on. The
appearance of a multimedia message may vary depending on the receiving
device.
You can choose to receive all messages, to block all messages, or to receive
messages only when you are in the service provider’s home network.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Allow multimedia recept. and one of the following:
Yes—Allow all incoming messages.
In home network—Allow incoming messages only if you are in the service
provider’s home system. This is a network service. Check with your service
provider for more information.
No—Block all incoming messages.
Incoming multimedia messages
You can set how your phone retrieves incoming multimedia messages.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Incoming multim. msgs. and one of the following:
Retrieve—Sets the phone to automatically retrieve all multimedia messages.
When new messages arrive, you are notified that a multimedia message is
received. If you choose to automatically retrieve messages, you can select Show
to read the multimedia message or Exit to view them in your inbox later.
Retrieve manually—Choose the messages you wish to retrieve. When new
messages arrive, you are notified that a multimedia message is available for
retrieval. If you select to manually retrieve messages, select Show to open the
message notification, then Retrieve. Select Exit to save the notification to your
inbox, and retrieve the message later.
Reject—Sets the phone to reject multimedia messages.
FCC DRAFT ONLY
41
Messaging
Allow or block advertisements
Allows you to block advertisements. This setting is not available if multimedia
reception is blocked.
From the start screen, select Menu > Messaging > Multimedia msgs. > Message
settings > Allow advertisements > Yes or No.
This is a network service. Check with your service provider for more information.
■ Distribution lists
Distribution lists allow you to send text or multimedia messages to a designated
group of people.
Create distribution lists
1. In the standby mode, select Menu > Messaging > Distribution lists > New list.
If you create a second distribution list, select Menu > Messaging >
Distribution lists > Options > Create new list.
2. Enter a name for the list, and select OK.
3. To add a contact to this list, select Add new, and add the contacts one by one.
A distribution list only contains phone numbers of recipients.
Add and remove contacts
To add contacts, select Menu > Messaging > Distribution lists > the list > Add
new. Add the contacts one by one.
To remove contacts, select Menu > Messaging > Distribution lists > the list >
Options > remove contact name.
Manage distribution lists
1. In the standby mode, select Menu > Messaging > Distribution lists.
2. Lists you have created appear in the display. Scroll to the list you wish to
modify; select Options and one of the following:
Create new list—Create a new distribution list.
Send message—Send message to the distribution list.
Rename list—Rename the distribution list.
42
FCC DRAFT ONLY
Messaging
Clear list—Clear the distribution list of all current contacts.
Delete list—Delete the distribution list.
■ Voice messages
If you subscribe to voice mail, your wireless provider will furnish you with a voice
mailbox number. You need to save this number to your phone to use voice mail.
When you receive a voice message, your phone lets you know by beeping,
displaying a message, or both. If you receive more than one message, your phone
shows the number of messages received.
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number to
your phone. If so, the number will appear in the display in step 2. Select OK to
leave the number unchanged.
1. In the standby mode, select Menu > Messaging > Voice messages > Voice
mailbox number.
2. If the number is not displayed or incorrect, enter your voice mailbox area code
and number.
3. Select OK.
Call and set up your voice mail
1. After you save the voice mailbox, from standby mode, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to set up your voice mail.
Listen to your voice mail
Once you have set up voice mail, you can dial the number in one of four ways:
• Dial the number using the keypad.
• Press and hold 1.
• Select Listen if there is a notification on the display.
• In the standby mode, select Menu > Messaging > Voice messages > Listen to
voice messages.
FCC DRAFT ONLY
43
Messaging
When you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Note
that each voice mail service may vary. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and
press *.
Be precise; you will need this information in "Set up voice mail with dialing
codes," p. 44.
Set up voice mail with dialing codes
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to an empty 1-touch dialing slot, and select Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes, and enter any codes as necessary using the
information that you saved from "Write down number and process," p. 44.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp. For more
information on dialing codes see "Insert dialing codes," p. 51.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
44
FCC DRAFT ONLY
Messaging
■ Minibrowser messages
Minibrowser messaging is a network service. See "Network services," p. 7 for
more information.
If your wireless service provider supports this feature, you can check for e-mail
messages using the minibrowser. In the standby mode, select Menu >
Messaging > Minibrowser messages > Connect.
See "Mobile web," p. 116 for more information on using your phone to access
web pages.
FCC DRAFT ONLY
45
Log
5. Log
Log stores information about the last 30 missed, 30 received, or 30
dialed calls. It also adds the total duration of all calls. When the number of calls
exceed the maximum, the most recent call replaces the oldest.
Whether viewing missed, received, or dialed calls, the menu options are the
same:
Time of call—Display the date and time of the call.
Send message—Send a message to the number.
Use number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add the number to an existing name in your contacts list, if the
number is not associated with a name.
Delete—Clear the number from memory.
Call—Call the number.
■ View missed calls
The missed calls feature does not function when your phone is switched off.
Missed calls are calls that were never answered.
1. In the standby mode, select Menu > Log > Missed calls; if a missed call
notification appears, select List.
2. Scroll to a name or number, select Options, and a menu option.
■ View received calls
Received calls are calls that have been answered.
1. In the standby mode, select Menu > Log > Received calls.
2. Scroll to a name or number, select Options, and a menu option.
■ View dialed numbers
Dialed calls are previous numbers you have dialed from your phone:
46
FCC DRAFT ONLY
Log
1. In the standby mode, press the call key; or select Menu > Log > Dialed
numbers.
2. Scroll to a name or number, select Options, and a menu option.
■ Time of call
You can make or receive up to five calls to or from the same number and view the
time each call occurred. Your clock must be set for this feature to work
accurately.
1. While viewing a missed, received, or dialed call, select Options > Time of call.
2. Scroll down to view the most recent call times from this number.
3. Select Back to return to the options list.
■ Clear log lists
You can delete any missed, dialed, or received calls from phone memory.
In the standby mode, select Menu > Log > Clear log lists > All call lists, Missed
calls, Received calls, Dialed numbers, or Message recipients.
■ Call timers
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
You can view the duration of your calls.
In the standby mode, select Menu > Log > Call timers and one of the following
options:
Last call duration—Check the time of your last call.
Dialed calls' duration—Check the combined time of calls you dialed for either
Home or Roaming.
Received calls' duration—Check the combined time of calls you received for for
either Home or Roaming.
All calls' duration—Check the combined time of all calls.
Life timer—Check the total airtime minutes logged on your phone.
Clear timers—Enter your lock code, and select OK to clear all timers on your
phone.
FCC DRAFT ONLY
47
Log
Note: Some timers, including the life timer, may be reset during service
or software upgrades.
■ Duration of data or fax calls
Data/fax calls are a network service. See "Network services," p. 7 for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data and fax calls.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
In the standby mode, select Menu > Log > Data/fax calls and one of the
following options:
Last sent data/fax—View the size (KB) of the last sent data or fax call.
Last received data/fax—View the size (KB) of the last received data or fax call.
All sent data/fax—View the size (KB) of all sent data and fax calls.
All received data/fax—View the size (KB) of all received data and fax calls.
Last data/fax’s duration—View the duration time of the last data or fax call.
All data/fax calls’ duration—View the duration time of all calls.
Clear all data/fax logs—Select OK > Yes to clear all data and fax logs.
■ Duration of minibrowser calls
Minibrowser is a network service. See "Network services," p. 7, for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data from the minibrowser.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
In the standby mode, select Menu > Log > Minibrowser calls and one of the
following options:
Last sent browser data—View the size (KB) of the last send browser data.
Last rcvd. browser data—View the size (KB) of the last received data.
All sent browser data—View the size (KB) of all sent browser data.
All received browser data—View the size (KB) of all received browser data.
Last browser session—View the duration time of the last browser session.
48
FCC DRAFT ONLY
Log
All browser sessions—View the duration time of all browser sessions.
Clear all browser logs—Select OK > Yes to clear all browser logs.
FCC DRAFT ONLY
49
Contacts
6. Contacts
The contacts list can hold up to 500 contacts with multiple numbers and text
notes for each contact. The amount of numbers and text entries that you can
save may vary, depending on length and the total number of entries in the
contacts list.
In the standby mode, select Menu > Contacts and from the following options:
Names—List of contacts currently on your phone.
Settings—Change your contact settings.
Groups—Assign contacts to caller groups.
Voice tags—Assign voice commands to phone numbers.
1-touch dialing—Assign specific keys to phone numbers.
My number—Shows the current number assigned to the phone.
Delete all contacts—Delete all contacts on your phone.
To quickly access your contacts scroll up or down while in the standby mode.
■ View contacts
In the standby mode, select Menu > Contacts > Names or scroll down to see your
current list of contacts. While viewing your contact list, you can select Details for
the contact information or Options and one of the following:
Search—Search your contacts.
Add new contact—Add a new contact.
Delete contact—Delete the highlighted contact.
To make a call, highlight a contact, and select Call.
■ Search contacts
In the standby mode, select Menu > Contacts > Names > Options > Search.
Enter the first character of the contact name, and highlight the contact you wish
to view.
Note: If the right selection key on your phone has a network operator
menu, select Names > Options > Search in standby mode.
50
FCC DRAFT ONLY
Contacts
■ Add new contacts
Save a name and number
1. In the standby mode, enter the phone number you wish to save.
2. Select Save.
3. Enter the name, and select OK > Done.
When you enter a number, you can select Options > Insert pause (’p’) to insert a
pause code or Options > Insert wait (’w’) to insert a wait code.
Save a number (only)
1. In the standby mode, enter the phone number you wish to save.
2. Select and hold Options.
Save a contact
1. In the standby mode, select Menu > Contacts > Names > Options > Add new
contact.
2. Enter the name, and select OK.
3. Enter the phone number, and select OK.
Insert dialing codes
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a speed dial location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow
them in the dialing string.
You can can automate voice mail with dialing codes. For more information, see
"Automate voice mail," p. 44.
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code
Indicates...
Bypasses a set of instructions.
FCC DRAFT ONLY
51
Contacts
Dialing code
Indicates...
Causes the international access code to be replaced by +.
Pauses for 2.5 seconds before sending any numbers that follow.
Waits for you to press the call key before sending the numbers
or codes that follow.
Save multiple numbers
You can save different types of phone numbers per contact. The first number you
save for any entry is automatically set as the default, but the default number can
always be changed.
1. In the standby mode, scroll down to display your list of contacts.
2. Select the contact to which you want to add a phone number.
3. Select Details > Options > Add detail > Number > General, Mobile, Home,
Work, or Fax.
4. Enter the phone number, and select OK.
If you want to change the number type, highlight the number and select
Details > Options > Change type > General, Mobile, Home, Work, or Fax.
Save other details
To add an address or note an existing contact, do the following:
1. In the standby mode, scroll down to display your list of contacts.
2. Scroll to the contact to which you want to add an addess or note.
3. Select Details > Options > Add detail > E-mail address, Web address, Street
address, or Note.
4. Enter the text for the note or address, and select OK.
To associate an image or tone to an existing contact, do the following:
1. In the standby mode, scroll down to display your list of contacts.
2. Scroll to the contact to which you want to add an addess or note.
3. Select Details > Options > Add detail > Image or Tone.
4. Select an image or tone from the Gallery
52
FCC DRAFT ONLY
Contacts
Change default number
To change the default number for an existing contact.
1. In the standby mode, scroll down to display your list of contacts.
2. Select the contact for which you want to change the default number.
3. Highlight the new default number, and select Details > Options > Set as
default.
Send business cards
You can send a business card to a compatible phone or other handheld device.
1. In the standby mode, scroll down to display your list of contacts.
2. Select the contact to which you want send as a business card.
3. Select Details > Options > Send business card > Via multimedia, Via text
message, Via infrared, or Via Bluetooth.
4. Select Primary number or All details.
5. Enter the number for your recipient, or select Search to retrieve a number
from your contacts; select OK.
■ Edit contacts
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, select Details.
3. Highlight the name, number, detail, or image you wish to edit and select
Options. The type of detail you highlight determines your selection of options.
Choose one of the following options:
View—View the phone number of the contact.
Add detail > Name—Add a name to the contact. This option appears only if
the contact does not have a name.
Add detail > Number > General, Mobile, Home, Work, or Fax—Add a number
to the contact.
Add detail > E-mail address, Web address, Street address, Note, Image, or
Tone—Add an additional detail to the contact.
Edit name, Edit number, or Edit detail—Edit the detail of the contact.
FCC DRAFT ONLY
53
Contacts
Change image—Change the image associated with the contact.
Delete contact—Delete the entire contact entry from your contacts.
Delete—Delete the detail from this contact.
Send message—Create and send a text message to the contact.
Use number—Display the phone number, ready for use.
Set as default—Make the number the default for the contact.
Change type > General, Mobile, Home, Work, or Fax—Change the number
type.
Add voice tag—Add a voice tag to the contact.
Save to gallery—Save the image to your Gallery.
Send business card > Via infrared, Via text message, Via Bluetooth, or Via
multimedia—Send the contact as a business card to another phone.
Go to—Create a shortcut key for a Web address.
Caller groups > Select No group to remove the contact from a caller group or
Family, VIP, Friends, Business, or Other to add the contact to an existing caller
group.
1-touch dialing—Assign the contact to your 1-touch dialing list.
■ Modify contact settings
In the standby mode, select Menu > Contacts > Settings and the setting you
wish to change:
Scrolling view—Select Normal name list, Name and number, Large name list, or
Name and image view.
Memory status—View the amount of phone memory used as well as the amount
of phone memory available.
■ Set up caller groups
You can add contacts to any of five caller groups, and assign a unique ringing
tone or graphic to that group. This enables you to identify callers from the group
by their unique ringing tone or graphic.
54
FCC DRAFT ONLY
Contacts
Set up a caller group
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, select Details.
3. Highlight a number, select Options > Caller groups and the select the caller
group you wish to add the number to.
Modify a caller group
In the standby mode, select Menu > Contacts > Groups > Family, VIP, Friends,
Business, or Other and one of the following options:
Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo—Turn the graphic for the caller group on or off.
Group members—Add or remove members from the caller group.
■ Set up voice tags
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are dependent on the speaker's
voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
Assign a voice tag
To use voice dialing, you must first assign a voice tag to a number.
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, select Details.
FCC DRAFT ONLY
55
Contacts
3. Highlight the number you want to assign a voice tag, select Options > Add
voice tag.
4. Select Start, then speak clearly into the microphone. Do not select Quit unless
you want to cancel the recording.
5. After you finish speaking, the phone automatically stops recording, saves, and
replays the voice tag.
appears next to the phone numbers which have voice tags assigned.
Use a voice tag
1. In the standby mode, select and hold Names.
2. When you hear several beeps and Speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, a notification appears, and the phone
automatically dials the number. If the phone does not locate a number or
recognize the voice tag, No match found appears.
Play back a voice tag
1. In the standby mode, select Menu > Contacts > Voice tags.
2. Scroll to the voice tag you want to play back, and select Playback.
Modify a voice tag
1. In the standby mode, select Menu > Contacts > Voice tags.
2. Scroll to the voice tag you want to change, and select Change.
3. Select Start, and speak clearly into the microphone. The phone repeats your
voice tag, and Voice tag changed appears.
Delete a voice tag
1. In the standby mode, select Menu > Contacts > Voice tags.
2. Scroll to the voice tag you want to delete, and select Delete. Delete voice tag?
appears.
3. Select Yes to erase the voice tag.
56
FCC DRAFT ONLY
Contacts
■ Set up 1-touch dialing
You can associate any entry in your contacts with a key from 2–9; to dial those
entries, press and hold the assigned key.
Assign a key to 1-touch dialing
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to any empty slot, and select Assign.
3. Enter the number (including the area code), and select OK; or select Search to
retrieve a number from your contacts.
4. If necessary, enter the contact name for the number, and select OK.
If 1-touch dialing is off, the phone displays a prompt asking if you want to
activate 1-touch dialing. Select Yes to activate 1-touch dialing.
Change 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing entry you wish to change, and select Options >
Change.
3. Enter the new number, or select Search to retrieve a number from your
contacts; select OK.
4. If necessary, enter the contact name for the number, and select OK to change
the key assignment.
Delete 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing location you wish to delete.
3. Select Options > Delete > Yes to delete the key assignment.
■ Display phone number
In the standby mode, select Menu > Contacts > My number to display your
phone number.
FCC DRAFT ONLY
57
Contacts
■ Delete contacts
Delete individual contacts
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, and select Options > Delete contact > Yes or No.
Delete all contacts
1. In the standby mode, select Menu > Contacts > Delete all contacts > Yes.
2. Enter your lock code, and press OK. See "Security," p. 95 for more information.
58
FCC DRAFT ONLY
Camera
7. Camera
You can take photos and record video clips with the built-in camera and adjust
its settings. The camera lens is on the back of the phone.
The camera produces photos in JPEG format and video clips in H.264 (QCIF)
format. After you take a picture or video, you can attach it to a multimedia
message, send it as a multimedia message, save it as a wallpaper, save it to a
compatible PC using Nokia PC Suite software, and upload it to a Web address
with the content image uploader. When you attach a picture to a contact, the
picture is displayed when the contact calls you.
If there is not enough memory to take a new photo, delete old photos or other
files in the Gallery.
The Nokia 6265 or Nokia 6265i device supports an image capture resolution of
320 x 240 pixels on the display. The image resolutions in these materials may
appear different.
Keep a safe distance when using the flash. Do not use the flash on people or
animals at close range. Do not cover the flash while taking a picture.
When the phone is in camera mode, the interface will switch from portrait to
landscape. Turn the phone on its side to use the camera and view the available
options.
■ Take a photo
You can use your camera to take photographs. To take a picture, complete the
following steps:
1. In the standby mode,
press the camera key or
select Menu > Camera.
This activates the camera.
The display is now
landscape.
If you are in Video mode,
select Options > Still
image to switch to Still
image mode.
FCC DRAFT ONLY
59
Camera
2. To take a picture, press the camera key or select
Capture to take the photo. Press the volume key to
zoom in and out.
When taking a photo, a shutter sound is heard. The
phone saves the photo in the Images folder of the
Gallery menu. The saved photo is shown on the
display.
3. Select Back to take another photo, Delete to erase the photo, or Options and
one of the following:
Zoom—Zoom in on a captured photo; scroll to navigate around the photo.
New image—Returns to camera mode.
Send > Via multimedia, Via Bluetooth, or Via infrared—Send a photo to a
compatible phone or PC.
Attach to contact—Attach the photo to a contact.
Rename—Edit the name of the photo.
Open Gallery—Open the Gallery, where photos are saved.
Set contrast—Scroll to adjust the contrast of the photo.
Edit image—Opens the photo for editing.
Print—Prints the image to a PictBridge supported printer.
Use image > Set as wallpaper, Set as screen saver, or Set as contact image—
Use the photo.
Details > View details of the photo.
■ Use the self-timer
You can use the camera self-timer to delay taking a photo for approximately 10
seconds.
1. In the standby mode, select Menu > Camera > Options > Self-timer on.
2. Select Start.
A beep sounds while the self-timer is running, and beeps faster when the
camera is about to capture the photo. After the timeout, the camera takes the
photo and saves it to the Images folder of the Gallery menu.
60
FCC DRAFT ONLY
Camera
■ Take a sequence of photos
You can use the camera image sequence option to take up to five photos in quick
succession.
1. In the standby mode, select Menu > Camera > Options > Img. sequence on.
2. Select Sequence.
The camera take five photos in sequence. After the photos are taken, the
camera saves them to a folder in the Images folder of the Gallery menu.
■ Record a video
1. In the standby mode, press the camera key or select Menu > Camera. This
activates the camera. The display is now landscape.
If you are in Still image mode, select Options > Video to switch to Video
mode.
2. Select Record to begin recording the video clip.
While you are recording, the indicator and the remaining recording time are
shown at the top of the display.
3. Select Pause to pause the recording, Continue to resume the recording, or
Stop to stop the recording.
The phone saves the video clip in the Video clips folder of the Gallery menu.
4. Select Back to take another video clip, Play to play the video clip, or Options
and one of the following.
Delete—Delete the video clip from the Gallery.
New video clip—Returns to camera mode.
Send > Via multimedia, Via infrared, or Via Bluetooth—Send the video clip to
a compatible phone or PC.
Rename—Edit the name of the video clip.
Open Gallery—Opens the Gallery, where video clips are saved.
Mute audio or Unmute audio—Turn the video clip’s sound on or off.
Set contrast—Use the scroll keys to adjust the contrast of the video clip.
Use video clip > Set as screen saver—Use the video clip.
Details—View details of the video clip.
FCC DRAFT ONLY
61
Camera
■ Camera options
In the standby mode, select Menu > Camera > Options and from the following:
Still image or Video—Choose camera mode to take a picture or record a video.
Mute audio or Unmute audio—Turn the sound on or off for the video clip. Option
onlly appears when camera is in video mode.
Night mode on or Night mode off—Switches the camera night mode on and off.
Flash on or Flash off—Turns the camera flash on and off.
Self-timer on or Self-timer off—Turns the self-timer on and off. This option only
appears in still image mode.
Img. sequence on or Img. sequence off—Turns image sequencing on or off. The
pictures are then saved to the gallery. This option only appears in still image
mode.
View previous—View the previous photo or video taken. This option only appears
when a photo has been taken during that session.
Open Gallery—Open the Gallery to view saved images, videos, and recordings.
Settings—Change the settings for the phone camera.
■ Modify camera settings
Image quality
Define file compression when saving the image. High-quality images have less
file compression and provide the best image quality, but take more memory.
In the standby mode, select Menu > Camera > Options > Settings > Image
quality > High, Normal, or Basic.
Image size
Set the size of an image when taking a picture. A larger image has better
resolution, but takes more memory.
In the standby mode, select Menu > Camera > Options > Settings > Image size
and a resolution size.
Video clip quality
Define file compression when saving the video clip. High-quality video clips have
less file compression and provide the best image quality, but take more memory.
62
FCC DRAFT ONLY
Camera
In the standby mode, select Menu > Camera > Options > Settings > Video clip
quality > High, Medium, or Low.
Video clip length
You can change the maximum length of a video clip. The maximum size of a video
clip can be 600 Kb. A recording will stop once it reaches the maximum size, even
if the maximum length is set longer. Only video clips that are default length or
shorter can be sent in a multimedia message.
In the standby mode, select Menu > Camera > Options > Settings > Video clip
length > Default or Maximum.
Camera sounds
You can turn off the camera sounds that happen when a picture is taken or video
recorded.
In the standby mode, select Menu > Camera > Options > Settings > Camera
sounds > On or Off.
Self-timer lights
You can turn off the self-timer lights that appear when a picture is taken.
In the standby mode, select Menu > Camera > Options > Settings > Self-timer
lights > On or Off.
Default title
You can change the default title your phone uses to assign names to new photos
and video clips.
In the standby mode, select Menu > Camera > Options > Settings > Default
title > Automatic or My title. If you select My title, enter new text upon which
filenames the phone creates are based on.
Image storage
You can change where your phone camera stores files.
In the standby mode, select Menu > Camera > Options > Settings > Image and
video storage > Default folder or Other folder. If you select Other folder, locate
the new your new location. This setting in only available when you are using a
mini SD card.
FCC DRAFT ONLY
63
Camera
Default mode
You can change the default mode of your phone camera.
In the standby mode, select Menu > Camera > Options > Settings > Default
mode > Still image or Video.
64
FCC DRAFT ONLY
Gallery
8. Gallery
You can save pictures, video clips, recordings, and ringing tones to
folders in the Gallery, and add new folders to the ones already there. You can
download images and tones using multimedia messaging, text messaging, mobile
Internet sites, or Nokia PC Suite.
Your phone supports a digital rights management system to protect content that
you have acquired. A piece of content, such as a ringing tone, can be protected
and associated with certain usage rules, for example, the number of usage times
or a certain usage period. The rules are defined in the content activation key that
can be delivered with the content or separately, depending on the service
provider. You may be able to update these activation keys. Always check the
delivery terms of any content and activation key before acquiring them, as they
may be subject to a fee.
Copyright protection may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Your phone has about 20.0 MB of memory for storing files in the Gallery. This
memory is not shared with other functions, such as contacts. If the phone
displays a message that the memory is full, delete some existing files before
proceeding. You can also use a compatible mini SD cards to add memory.
Warning: Use only compatible mini SD cards with this device. Other
memory cards, such as MultiMediaCards, do not fit in the mini SD card
slot and are not compatible with this device. Using an incompatible
memory card may damage the memory card as well as the device, and
data stored on the incompatible card may be corrupted.
■ Open a folder
In the standby mode, select Menu > Gallery to view the folder system. The phone
folder system includes:
Memory card—If there is a mini SD card in the phone, a mini SD icon is displayed.
You can access your mini SD card folder system.
Images—By default, camera photos are saved to this folder.
Video clips—By default, camera video clips are saved to this folder.
Music files—By default, music files are saved to this folder.
Graphics—A set of graphics included with your phone are stored here.
FCC DRAFT ONLY
65
Gallery
Presence logos—A set of logos for online states included with your phone are
stored here.
Tones—A set of ring tones included with your phone are stored here.
Recordings—By default, voice recordings are saved to this folder.
Themes—A set of themes included with your phone are stored here.
Received files—Files sent directly to your phone are stored here.
Your folders—Folders you create appear after the preset folders.
To open a folder, highlight the folder and select Open. Once you open the folder
list and highlight a file, you can access the file or the options associated with
that specifc file type.
■ Gallery options
In the standby mode, select Menu > Gallery > Options and one of the following:
Set password—Create a password (1–8 characters) for the mini SD card, to
protect it against unauthorized use. This option is available only for the mini SD
card folder.
Change password—Change the mini SD card password that you have created.
This option is available only for the mini SD card folder and if you have created a
password.
Delete password—Delete the mini SD card password that you have created. This
option is available only for the mini SD card folder.
Rename memory card—Enter a name for the mini SD card. This option is available
only for the mini SD card folder.
Format memory card—Delete all files and folders stored on the mini SD card. This
option is available only for the mini SD card folder.
Delete folder —Delete a folder you have created. You cannot delete a preset
folder.
Move—Move the selected folder into another folder. After selecting Move,
highlight another folder, and select Move to. You cannot move a preset folder.
Rename folder—Rename a folder you have created. You cannot rename a preset
folder.
Details—Show the name, size, and date of creation of the selected folder.
Type of view—Choose whether to view the folders as a list with details, list only or
a grid.
66
FCC DRAFT ONLY
Gallery
Sort—Sort the contents of the selected folder by name, date, format, or size.
Add folder—Create a new folder.
Memory status—Check the available memory for the phone handset or the
mini SD card.
Activation key list—View the list of available activation keys. You can delete
activation keys if desired.
Memory status—Check the available memory for the phone handset or the
mini SD card.
Other options appear depending on the type of files that exist in the folders.
FCC DRAFT ONLY
67
Media
9. Media
■ Media player
With Media player you can download, view, and play compatible images, audio
and video files, and animated images from a variety of sources. Media player
plays streaming videos and streaming audio from a network server. Streaming
functionality is a network service and requires network support. Check the
availability of these services, pricing, and tariffs with your network operator or
the service provider whose service you wish to use. Service providers will also
give you instructions on how to use their services.
In the standby mode, select Menu > Media > Media player and one of the
following:
Online media—Connects to the operator’s network. This is a network service.
Check with your service provider for pricing and information.
Open Gallery—Open the Gallery. From the Gallery, you can play stored audio and
video files. See "Gallery," p. 65.
Go to address—Enter the address of a mobile Internet service, and select OK.
FF/Rew interval—Choose an the interval at which a video clip will fast forward or
rewind.
■ Music player
Your phone includes a Music player for listening to music or other tracks in MP3
or AAC format. You can transfer files from a PC to your phone using a USB data
cable, an infrared, or a Bluetooth connection. To transfer music tracks from a
compatible PC and manage the music tracks and track lists, see the instructions
for the Nokia Audio Manager application in the Nokia PC Suite online help. See
"USB data cable transfer," p. 91; "Infrared connectivity," p. 90; and "Bluetooth
connectivity," p. 87 for more information on transferring music tracks to your
phone.
Music files stored in the Gallery are automatically detected and added to the
default playlist. Music files stored elsewhere, such as in a mini SD card folder,
must be defined in a track list before you can listen to them.
You can listen to the sound files through a compatible headset or the phone
loudspeaker.
68
FCC DRAFT ONLY
Media
You can make or answer a call while using Music player. During a call, the
playback is paused. When the call ends, Music player restarts.
Play music tracks
In the standby mode, select Menu > Media > Music player. The details of the first
track on the default track list are shown.
To use the graphical keys,
right to the desired key, and select it.
Play track—To play a track, select
, or
, on the display, scroll left or
Adjust volume—To adjust the volume level,
use either the volume key.
Stop track—To stop the playing, select
Skip tracks—To skip to the beginning of the
next track, select
. To skip to the
beginning of the previous track, select
twice.
Rewind or fast forward—To rewind the
current track, select and hold
. To fast
forward the current track, select and hold
. Release the key at the position you want.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Music player options
In the standby mode, select Menu > Media > Music player > Options and one of
the following:
Play via Bluetooth—Make a connection to an audio enhancement using a
Bluetooth connection..
Track list—View all the tracks available on a track list. To play a track, highlight
the track, and select Play. Select Options > Send to send the music file. Select
Options > Refresh all tracks to refresh the track list (for example, after adding
new tracks to the list). Select Options > Change track list to change the track list
that is shown when you open the Music player menu, if several track lists are
available in the phone.
Play options—Select Random to play the tracks on the track list in random order.
Select Repeat to play the current track or the entire track list repeatedly.
FCC DRAFT ONLY
69
Media
Media equalizer—The equalizer enhances the sound quality when using Music
player by amplifying or attenuating frequency bands. There are five preset
equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable
settings.
Headset or Loudspeaker—With the headset attached, listen to Music player
through a headset or the loudspeaker. When using a compatible headset, you can
skip to the next track by pressing the headset key quickly. To stop the playing,
press and hold the headset key.
Warning: When using the stereo headset your ability to hear outside
sounds may be affected. Do not use the stereo headset where it can
endanger your safety.
Send > Via multimedia, Via infrared, or Via Bluetooth—Send music files to a
compatible device.
Memory status—View used and free memory of Handset and Memory card.
■ Radio
Your phone has an FM radio that also functions as an alarm clock radio. You can
listen to the FM radio on your phone through the hands-free speaker or with a
headset. For FM stereo, connect a compatible music stand or stereo headset to
the connector on the bottom of the phone.
The FM radio depends on an antenna other than the wireless device antenna. A
compatible headset or enhancement needs to be attached to the device for the
FM radio to function properly.
The quality of a radio broadcast depends on coverage of the radio station in that
particular area.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing. Do not hold the device near
your ear when the loudspeaker is in use, because the volume may be
extremely loud.
Play radio
In the standby mode, select Menu > Media > Radio. The Radio turns on and plays
the last radio frequency you used.
To use the graphical keys,
right to the desired key, and select it.
70
, or
, on the display, scroll left or
FCC DRAFT ONLY
Media
Channel search—To start a channel search,
select and hold
or
. To change the
radio frequency in 0.05 MHz steps, briefly
press
or
Switch off—Press and hold the end key to
turn off the radio.
Adjust volume—To adjust the volume level,
use either the volume key.
Save channel—To save the channel to a
memory location 1 to 9, press and hold the
corresponding number key. To save a channel
to a memory location 10 to 20, briefly press 1
or 2, then press and hold desired number.
Enter the name of the channel, select OK.
Select channel—To select to a channel, select
or
. To go directly to a
saved channel, briefly press the corresponding number keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. Once the call is
ended, the radio switches back on.
Radio options
In the standby mode, select Menu > Media > Radio. The radio turns on. Select
Options and one of the following:
Turn off—Turns off the radio.
Save station—Enter a name for the channel, and select OK. Select one of 20
locations to save the channel location.
Stations—Select from list of current saved channels on your phone. Use
Options > Delete station to clear channels or Options > Rename to rename
channels.
Mono output or Stereo output—Listen to the radio in monaural mode (default) or
in stereo. Stereo output is available through a stereo enhancement.
Headset or Loudspeaker—With the headset attached, listen to the radio through
a headset or the loudspeaker.
Set frequency—Manually enter the frequency of a known radio station, and select
OK. You can also press * to set a frequency.
FCC DRAFT ONLY
71
Media
■ Voice recorder
You can make a short (up to 3 minutes) recording and save it to the Recordings
folder or another folder in the Gallery.
The recorder cannot be used when a data call or GPRS connection is active.
Record speech or sound
1. In the standby mode, select Menu > Media > Voice recorder.
2. To start the recording, select record virtual button.
3. Hold the phone in the normal position near your ear, and record your
message.
4. When you are finished recording, select stop virtual botton.
The recording is given a default name and saved to the Recordings list. The
default location of the Recordings list is the Recordings folder in the Gallery.
After you have made a recording you can select Play last recorded to replay the
recording and Send last recorded > Via infrared, Via Bluetooth, or Via multimedia
to send the recording to a compatible phone. These options are only available
during the current recording session.
Recording list
1. In the standby mode, select Menu > Media > Voice recorder > Recordings list.
2. Navigate through the Recordings folder, and select a recording you want to
modify.
3. Select Open to open and play the recording or Options to use the Gallery
options.
Change the storage folder
You can select a folder other than Recordings as the default folder to store your
voice recordings.
1. In the standby mode, select Menu > Media > Voice recorder > Select memory.
2. Highlight the new location, and select Set.
72
FCC DRAFT ONLY
Media
■ Equalizer
The equalizer enhances the sound quality when using Music player by amplifying
or attenuating frequency bands. There are five preset equalizer settings (Normal,
Pop, Rock, Jazz, and Classical) and two customizable settings.
Activate an equalizer set
In the standby mode, select Menu > Media > Equalizer, and highlight the desired
equalizer setting, and select Activate.
Create a custom equalizer set
1. In the standby mode, select Menu > Media > Equalizer.
2. Highlight a customizable setting, and select Options > Edit.
The selected set appears in the display with the bar on the far left highlighted.
The bars adjust frequencies, from the lowest (the far left bar) to the highest
(the far right bar). The higher the indicator on a particular bar, the more that
frequency is amplified.
3. To adjust the lowest frequency, scroll up and down to move the indicator on
the bar.
4. To adjust other frequencies, scroll right and left to move to the other bars.
5. Repeat steps 3 and 4 to adjust the setting for each frequency.
6. When you are finished, select Save.
7. To rename the setting, select Options > Rename, enter a new name, and
select OK.
8. To activate the setting, select Activate.
FCC DRAFT ONLY
73
Settings
10. Settings
Use the Settings menu to change profiles, display settings, themes, tone settings,
time and date settings, call settings, phone settings, voice commands,
connectivity, enhancements, security settings, application settings, network
settings, network services, restore factory settings, and phone details.
■ Profiles
Profiles define how your phone reacts when you receive a call or message, how
your keypad sounds when you press a key, and more. Ringing options, keypad
tones, and other settings for each of the available profiles can be left at their
default setting, or customized to suit your needs. The following profiles are
available: Normal, Silent, Meeting, Outdoor, and two customizable profiles.
Profiles are also available for enhancements such as a headset and car kit. See
"Enhancements," p. 93.
Activate a profile
In the standby mode, select Menu > Settings > Profiles > Normal, Silent,
Meeting, Outdoor, or custom profile > Activate.
Customize a profile
To modify a profile, do the following:
In the standby mode, select Menu > Settings > Profiles > Normal, Silent,
Meeting, Outdoor, or custom profile > Customize > and a profile option.
You cannot rename the Normal profile.
Set a timed profile
Timed profiles can be used to prevent missed calls. For example, suppose you
attend an event that requires your phone be set to Silent before the event starts,
but you forget to return it to Normal until long after the event. A timed profile
can prevent missed calls by returning your phone to the default profile at a time
you specify.
To set a time profile, do the following:
74
FCC DRAFT ONLY
Settings
1. In the standby mode, select Menu > Settings > Profiles > Normal, Silent,
Meeting, Outdoor, or custom profile > Timed.
2. Enter the time for the profile to expire, and select OK.
Timed profiles can be set up to 24 hours in advance.
■ Display
Standby mode settings
Wallpaper
You can set a either an Image or a folder of images (Slide set) as wallpaper for the
phone display.
In the standby mode, select Menu > Settings > Display > Standby mode
settings > Wallpaper and one of the following:
On—Active wallpaper on your phone.
Off—Deactive wallpaper on your phone.
Image—Choose an image from the Gallery for wallpaper. Select Open to browse
the Graphics folder. Select the image of your choice for the wallpaper.
Slide set—Select a folder in your Gallery to act as a slide show for the wallpaper.
Idle state font color
You can set font color of your phone idle state.
1. In the standby mode, select Menu > Settings > Display > Standby mode
settings > Idle state font color .
2. Scroll to select a color from the color grid.
Banner
Banner is a network service. See "Network services," p. 7 for more information.
If your wireless service provider supports this feature, you can choose whether
the display shows the operator logo or a custom banner, when the phone is in the
standby mode.
In the standby mode, select Menu > Settings > Display > Banner > Default or
Customize.
FCC DRAFT ONLY
75
Settings
Screen saver
You can choose a screen saver for the phone display. In the standby mode, select
Menu > Settings > Display > Screen saver and one of the following:
On—Active screen saver on your phone.
Off—Deactive screen saver on your phone.
Screen savers > Image, Slide set, Video Clip, Digital clock, or Open Camera—
Choose an image, video clip or other option to act as your screen saver.
Time-out > Modify the idle time before the screen saver activates.
Power saver
You can activate the power saving feature on your phone.
In the standby mode, select Menu > Settings > Display > Power saver > On or
Off.
Sleep mode
You can activate the sleep mode feature on your phone.
In the standby mode, select Menu > Settings > Display > Sleep mode > On or Off.
Color schemes
You can change the color of some display components in your phone, such as
indicators and signal bars.
In the standby mode, select Menu > Settings > Display > Color schemes and a
color scheme of your choice.
Backlight time-out
You can control the time-out of the backlight on your phone.
In the standby mode, select Menu > Settings > Display > Backlight time-out >
15 seconds. To change the time-out between 15 seconds and 5 minutes, select
Customize.
■ Themes
You select a theme for your phone display.
76
FCC DRAFT ONLY
Settings
In the standby mode, select Menu > Settings > Themes > Select theme and a
theme of your choice.
■ Tones
You can adjust the ringing volume, keypad tones, and more for the active profile.
In the standby mode, select Menu > Settings > Tones and one of the following:
Incoming call alert—Select how the phone notifies you of an incoming call.
Ringing tone—Select the ringing tone for incoming calls.
Ringing volume—Set the volume of your ringing tone.
Vibrating alert—Select On to activate the vibrating alert.
Message alert tone—Select the tone for received messages.
Keypad tones—Set the volume of your keypad tones (or turn them off).
Warning tones—Select On to activate the warning and confirmation tones.
Alert for—Define which caller groups the selected profile will accept or decline.
See "Set up caller groups," p. 54 for more information.
■ Time and date
Clock
Show or hide the clock
In the standby mode, select Menu > Settings > Time and date > Clock > Show
clock or Hide clock.
Set the time
1. In the standby mode, select Menu > Settings > Time and date > Clock > Set
the time.
2. Enter the time (in hh:mm format), and select OK.
3. Select am or pm (this option displays only when 12-hour format is in use).
Change the time zone
In the standby mode, select Menu > Settings > Time and date > Clock > Time
zone and your time zone based on Greenwich Mean Time (GMT), plus or minus
hours in your time zone.
FCC DRAFT ONLY
77
Settings
For example, GMT-8 is US Pacific time in Los Angeles, CA. GMT does not include
Daylight savings time, so add or subtract accordingly.
Change the format
In the standby mode, select Menu > Settings > Time and date > Clock > Time
format > 24-hour or 12-hour.
Date
Show or hide the date
In the standby mode, select Menu > Settings > Time and date > Date > Show
date or Hide date.
Set the date
In the standby mode, select Menu > Settings > Time and date > Date > Set the
date, enter the date, and select OK.
Change the format
1. In the standby mode, select Menu > Settings > Time and date > Date > Date
format and the format of your choice.
2. With Date on the display, select Date separator, and the separator of your
choice.
Set the auto-update of date and time
Auto-update is a network service. See "Network services," p. 7 for more
information.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area (for
example, when you have traveled to another network or time zone).
In the standby mode, select Menu > Settings > Time and date > Auto-update of
date/time > On, Confirm first, or Off.
If you use the Auto-update of date/time option while outside your digital
network, you may be prompted to enter the time manually. Network time will
replace the time and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
78
FCC DRAFT ONLY
Settings
■ Call
Location info sharing
Location info sharing sets whether your GPS signal is always on or only in the
case of an emergency.
In the standby mode, select Menu > Settings > Call > Location info sharing >
Emergency or On.
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone
complies with government regulations on location based emergency calling
services.
Anykey answer
When Anykey answer is on, briefly press any key except the right selection or end
key to answer a call.
In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number, and notifies you once the network is available.
In the standby mode, select Menu > Settings > Call > Automatic redial >On or
Off.
1-touch dialing
To activate or deactivate 1-touch dialing, do the following:
In the standby mode, select Menu > Settings > Call > 1-touch dialing > On or
Off. For more information on 1-touch dialing, see "Set up 1-touch dialing," p. 57.
Answer when slide opened
Set your phone to answer a call when you open the slide. If the setting is off, you
must press the call key after you open the slide.
FCC DRAFT ONLY
79
Settings
In the standby mode, select Menu > Settings > Call > Answ. when slide opened >
On or Off.
End call when slide closed
Set your phone to end a call when you close the slide. If the setting is off, you
must press the call key after you close the slide.
In the standby mode, select Menu > Settings > Call > End call when slide
closed > On or Off.
Automatic update of service
Set your phone to automatically receive updated from your netwok that may
improve service and coverage.
In the standby mode, select Menu > Settings > Call > Automatic update of
service > On or Off.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.
Save information
1. In the standby mode, select Menu > Settings > Call > Calling card.
2. Enter your security code, and select OK. (See "Security," p. 95.)
3. Scroll to one of the four memory locations, and select Options > Edit > OK >
Dialing sequence .
4. Select one of the following sequence types:
Access + phone + card—Dial the access number, the phone number, the card
number and PIN, if required.
Access + card + phone—Dial the access number, the card number and PIN, if
required, then phone number.
Prefix+ phone + card—Dial the prefix (numbers that must precede the phone
number) and phone number you want to dial, then card number and PIN, if
required.
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
80
FCC DRAFT ONLY
Settings
6. Select Card name.
7. Enter the card name, and select OK.
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. In the standby mode, select Menu > Settings > Call > Calling card.
2. Enter your security code, and select OK.
3. Scroll to the calling card of your choice, and select OK.
4. Press the end key to return to standby mode; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.
5. Press and hold the call key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, select OK.
Abbreviated dialing
You can create 4-5 digit numbers sequences for you contacts when Abbreviated
dialing is activated.
In the standby mode, select Menu > Settings > Call > Abbreviated dialing > On
or Off.
International prefix
You can store an international prefix into your phone. When you enter + at the
beginning of a phone number, your phone automatically inserts the international
prefix that you have stored.
1. In the standby mode, select Menu > Settings > Call > International prefix.
2. Enter the international prefix (for example, 0011), and select OK.
3. In the standby mode, enter + and the phone number you want to call. For
example, +3546789.
The phone dials the international prefix you have stored in your phone and
the phone number you have entered. For example, the phone dials
0011354789.
FCC DRAFT ONLY
81
Settings
Preferred carrier
Preferred carrier chooses a preferred long distance carrier.
In the standby mode, select Menu > Settings > Call > Preferred carrier > On or
Off.
If this feature is enabled you will need to enter the carrier code.
Data/fax calls
Receive data or fax calls
Data/fax calls is a network service. See "Network services," p. 7 for more
information.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is
connected.
For better performance during data calls, place the phone on a stationary surface.
Do not move the phone by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide.
The PC/PDA Connectivity Guide can be downloaded from the Nokia website at
www.nokiausa.com.
1. In the standby mode, select Menu > Settings > Call > Data/fax calls >
Incoming data/fax call and one of the following:
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
2. Select Data calls only or Fax calls only.
3. When you are finished receiving the fax or data call, repeat steps 1 and 2, and
select Normal.
View data transfer
You can view the transmission speed when sending or receiving data or fax calls.
In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate
display > Graphic or Off.
82
FCC DRAFT ONLY
Settings
Call summary
Your phone can display the time spent on a call when you hang up.
In the standby mode, select Menu > Settings > Call > Call summary > On or Off.
Show call time on display
Your phone can display the call time during the phone call.
In the standby mode, select Menu > Settings > Call > Show call time on display >
On or Off.
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID.
In the standby mode, select Menu > Settings > Call > Ring. tone for no caller ID >
On or Off. See "Customize a profile," p. 74 for more information on selecting a
ringing tone.
■ Phone
Language settings
Phone language
Phone language allows you set the language of the display text seen on the
phone.
In the standby mode, select Menu > Settings > Phone > Language settings >
Phone language and the language of your choice.
Voice playback language
Voice playback language allows you to set the language for voice playback.
In the standby mode, select Menu > Settings > Phone > Language settings >
Voice playback language and the language of your choice.
Automatic keyguard
Automatic keyguard allows you to automatically lock your phone after a defined
time.
In the standby mode, select Menu > Settings > Phone > Automatic keyguard >
On or Off.
FCC DRAFT ONLY
83
Settings
Navigation key
You can set the features that are activated when you press the scroll key.
1. In the standby mode, select Menu > Settings > Phone > Navigation key.
2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select
Change.
3. Select a function to assign to the action.
Memory status
You can view the memory usage of your phone or mini SD card. If you do not have
a mini SD card, you will only see the options for your phone memory.
Phone memory
In the standby mode, select Menu > Settings > Phone > Memory status > Phone
and of the following:
Free memory—Shows the amount of phone memory available for file storage.
Contacts—Shows the amount of phone memory currently used for Contacts.
Text messages—Shows the amount of phone memory currently used for Text
messages.
Gallery—Shows the amount of phone memory currently used for Gallery.
Organizer—Shows the amount of phone memory currently used for Organizer.
Applications—Shows the amount of phone memory currently used for
Applications.
Multimedia msgs.—Shows the amount of phone memory currently used for
Multimedia msgs.
Card memory
In the standby mode, select Menu > Settings > Phone > Memory status > Card
name and of the following:
Size—Shows the total amount of phone memory you can use for file storage.
Free memory—Shows the amount of phone memory available for file storage.
Used memory—Shows the amount of phone memory currently used for file
storage.
84
FCC DRAFT ONLY
Settings
Security keyguard
Security keyguard controls whether the security keyguard is on or off.
In the standby mode, select Menu > Settings > Phone > Security keyguard > On
or Off.
Touch tones
Touch tones are the tones that sound when you press the keys on your phone
keypad. You can use Touch tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from your
phone keypad, or send them automatically by saving them in your phone.
Set type
In the standby mode, select Menu > Settings > Phone > Touch tones > Manual
touch tones and one of the following:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone length
option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
In the standby mode, select Menu > Settings > Phone > Touch tones > Touch
tone length > Short (0.1 seconds) or Long (0.5 seconds).
Start-up tone
You can select a Start-up tone for when you turn on your phone.
In the standby mode, select Menu > Settings > Phone > Start-up tone > On or
Off.
Help text activation
Your phone displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 15 seconds and wait for the help text to display.
Scroll to page through the full help text, if necessary.
The default setting for help text is on. However, you can turn help text on or off.
FCC DRAFT ONLY
85
Settings
In the standby mode, select Menu > Settings > Phone > Help text activation >
On or Off.
Switch off tone
You can select a Switch off tone when you turn off your phone.
In the standby mode, select Menu > Settings > Phone > Switch off tone > On or
Off.
■ Voice commands
You can set as many as five Voice commands, which allow hands-free operation
of certain phone features.
Add a voice tag
Before using Voice commands, you must first add a voice tag to the phone
function.
1. In the standby mode, select Menu > Settings > Voice commands.
2. Select a function option you wish to tag, and select Add.
3. Select Start, and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag.
commands that have voice tags assigned.
(??) appears next to
Activate a voice command
After you have associated a voice command tag with a phone function, you can
issue a command by speaking the voice command tag.
1. In the standby mode, select and hold Names.
2. When Speak now appears, pronounce the voice tag clearly into the
microphone.
When the phone finds the voice command tag, Found: appears, and the phone
plays the recognized voice command tag through the earpiece. The function you
requested is activated.
86
FCC DRAFT ONLY
Settings
Voice command options
You can modify voice command tags. In the standby mode, select Menu >
Settings > Voice commands, highlight the voice command tag, and select one of
the following options:
Play—Listen to the voice command tag.
Options > Change—Change the voice command tag.
Options > Delete—Erase the voice command tag.
■ Connectivity
You can connect the phone to a compatible device using an IR connection. You
can also connect the phone to a compatible PC using IR or a USB data cable; and
use the phone as a modem to enable connectivity from the PC.
For more information, see the Nokia PC Suite online help. Nokia PC Suite and all
related software can be downloaded from the U.S. Mobile Phone products
section of www.nokiausa.com/pcsuite.
Important: Only install and use applications and other software from
sources that offer adequate security and protection against harmful
software.
Bluetooth connectivity
Bluetooth connectivity enables cost-free wireless connections between
electronic devices within a maximum range of 30 feet. A Bluetooth connection
can be used to send and receive images, texts, gallery files, voice recordings,
video clips, notes, business cards, and calendar notes. It can also be used to
connect wirelessly to products that use Bluetooth wireless technology, such as
computers. You can synchronise your phone and your PC using a Bluetooth
connection.
Since devices with Bluetooth connectivity communicate using radio waves, your
phone and the other device do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of 30 feet (10 meters) of each
other, although the connection can be subject to interference from obstructions
such as walls or from other electronic devices.
The Bluetooth application consumes the battery and reduces the operating time
of the phone. Take this into account when performing other operations with your
phone.
FCC DRAFT ONLY
87
Settings
This device is compliant with Bluetooth Specification 1.2 supporting the
following profiles:
• Object push profile (OPP)
• File transfer profile (FTP)
• Dial-up networking profile (DUN)
• Generic object exchange profile (GOEP)
• Headset profile (HSP)
• Hands-free profile (HFP)
• Generic access profile (GAP)
• Serial port profile (SPP)
To ensure interoperability between other devices supporting Bluetooth
technology, use Nokia approved enhancements for this model. Check with the
manufacturers of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the
background while using other features, increase the demand on battery power
and reduces the battery life.
Set up a Bluetooth connection
1. In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
On. The active Bluetooth connection is indicated by
at the top of the
display.
2. Select Search for audio enhanc. to search for compatible devices with
Bluetooth connectivity. The list of found devices appears in the display.
3. Select the desired device. If required, enter the Bluetooth passcode of the
device to complete the pairing.
4. If required, enter the Bluetooth passcode of the device to pair with the device.
Your phone connects to the device. You can start data transfer.
To view the device you are connected to, select select Menu > Settings >
Connectivity > Bluetooth > Active device.
88
FCC DRAFT ONLY
Settings
To deactivate Bluetooth, select Menu > Settings > Connectivity > Bluetooth >
Off. When you swith off the Bluetooth functionality. This will not affect other
functionalities of the phone
Connect with a Bluetooth device
You can set up a permanent association (pairing) between your phone and
another device with Bluetooth connectivity. Some devices may require pairing
before data transfer can take place.
In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
Paired devices > New to create you first pairing.
To pair with a device, you and the owner of the other device must agree on a
passcode of 1–16 numeric characters. The first time you try to connect the
devices, you must each enter the same passcode. Once the devices are paired, you
will not need to use the passcode again, so there is no need to remember it.
To connect to an established pairing, select Menu > Settings > Connectivity >
Bluetooth > Paired devices > the device > Connect.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth is not active or when the devices in the list are not available for
connection.
Bluetooth pairing options
In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
Paired devices > the device > Options and one of the following:
Assign short name—Give a nickname to the selected device (visible to you only).
Auto-conn. without conf.—Select Yes if you want the phone to connect to the
selected device automatically or No if you want the phone to ask for your
permission first.
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth connectivity within
range, scroll to the desired device, and select Pair to establish pairing with that
device. Do not accept Bluetooth connectivity from sources you do not trust.
Bluetooth settings
You can define how your phone is shown to other devices with Bluetooth
connectivity.
In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
Bluetooth settings and one of the following:
FCC DRAFT ONLY
89
Settings
My phone's visibility—Select Shown to all to show the phone to all other devices
with Bluetooth connectivity or Hidden to show the phone only to the paired
devices. Operating the phone in hidden mode is a safer way to avoid malicious
software.
My phone's name—Change your phone name that is seen by other users.
Send data
Instead of using the Connectivity menu, you can use other phone menus to send
various types of data to other devices with Bluetooth connectivity. For example,
you can send a video clip from the Video clips folder of the Gallery menu. See the
appropriate sections of the user guide for information about sending different
types of data.
Receive data
When a Bluetooth connection is active in your phone, you can receive notes,
business cards, video clips, and other types of data transfers from another device
with Bluetooth connectivity. When you receive a data transfer, an alarm sounds,
and a message appears in the start screen.
To view the transferred item immediately, select Show. To view the item at a later
time, select Exit.
Depending on the nature of the item it is saved in the appropriate menu in your
phone. For example, a business card would be saved in Contacts, and a calendar
note would be saved in Calendar.
Infrared connectivity
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, transmission and reception must be to or from an IR compatible
phone or device.
Do not point the IR beam at anyone’s eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from
3 inches to 3 feet.
2. To activate IR in your phone, select Menu > Settings > Connectivity >
Infrared.
90
FCC DRAFT ONLY
Settings
3. The user of the other device should activate IR as well.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be restarted.
Connection indicator
• When
is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When
blinks, your phone is trying to connect to the other device or a
connection has been lost.
USB data cable transfer
You can transfer data from your phone to a compatible PC, or from a compatible
PC to your phone using a CA-53 USB data cable. You can connect to a PC in three
separate modes.
Important: Disconnect the USB data cable from the phone to make a
call.
Enable default mode connection
Connect to your PC in Default mode to transfer phone data and files between
your phone and PC using Nokia’s PC Suite.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select OK > Default mode. A notification appears on the display stating a
connection is active.
You can now use PC Suite to connect to your phone.
Enable printing connection
Connect to a printer that support PictBridge in Printing mode to print pictures
directly.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select OK > Printing. A notification appears on the display stating a
connection is active.
You can now directly print pictures to PictBridge printer from your phone.
FCC DRAFT ONLY
91
Settings
Enable data storage connection
Connect to your PC in Data storage mode to transfer music, photo, and video files
to the phone mini SD card, and from the phone mini SD card to your PC with
Windows Explorer.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select OK > Data storage. The notification Data storage mode displays while
the phone is in data storage mode.
3. Open Windows Explorer. Your phone mini SD card will appear as a local drive
(named by Nokia 6265 or Nokia 6265i), and with a drive letter assigned to it.
4. Click on the folders to display a window that shows the contents of the folder
on the phone mini SD card.
5. Open a second instance of Windows Explorer and display the contents of the
folder on your PC where you have MP3 files, photo files, or video files stored.
6. Select the files on your PC that you wish to transfer to the phone.
7. Drag and drop the files from the second window into the first window and
place in a folder.
8. The files are transferred to the phone and can be played by the Music player,
or accessed by the Media player.
If you selected files with more memory than can fit on the phone memory, you
get an error note. Deselect some of your selected files until the selection fits.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the taskbar at
the bottom of your PC screen.
A window pops up that shows Unplug or Eject Hardware.
2. Click on USB Device in the Hardware devices window.
A popup window shows Stop a Hardware device.
3. Highlight USB device, and click OK.
The popup window Safe to Remove Hardware is shown with the message
“The ‘USB Device’ device can now be safely removed from the system.
4. Click OK.
92
FCC DRAFT ONLY
Settings
Important: To ensure that all memory card operations are completed in
a controlled way, do not unplug the connectivity cable until Windows
notifies you that it is safe to do so. Uncontrolled completion of the
memory card operations may cause the memory card and the
information stored on it to become corrupted. A corrupted memory card
may have to be formatted before it can be used again. When a memory
card is formatted, all information on the card is permanently lost.
Data and fax transfer
You can make data and fax transfers during a phone call. For more information,
see "Data/fax calls," p. 82.
■ Enhancements
An Enhancements menu is shown only if the phone is or has been connected to
the compatible enhancement.
Headset
In the standby mode, select Menu > Settings > Enhancements > Headset and
one of the following:
Default profile—Choose the profile you wish to be automatically activated when
a headset is connected.
Automatic answer—Calls are answered automatically after one ring when a
headset is connected. Select On or Off.
Handsfree
In the standby mode, select Menu > Settings > Enhancements > Handsfree and
one of the following:
Default profile—Choose the profile you wish to be automatically activated when
a car kit is connected.
Automatic answer—Calls are answered automatically after one ring when a car
kit is connected. Select On or Off.
Lights—Choose to keep the phone lights always on, or to shut off automatically
after several seconds. Select On or Automatic.
FCC DRAFT ONLY
93
Settings
Loopset
A LPS-4 Loopset accessory allows your device to optimize sound quality when
coupled with a hearing aid that is set to T-coil mode.
In the standby mode, select Menu > Settings > Enhancements > Loopset > Use
Loopset > Yes or No.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
TTY/TDD
Check with the manufacturer of the TTY/TDD device for a connecting cable that is
compatible with the Nokia 6265 or Nokia 6265i.
TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
In the standby mode, select Menu > Settings > Enhancements > TTY/TDD > Use
TTY > Yes or No.
Charger
In the standby mode, select Menu > Settings > Enhancements > Charger and
one of the following:
Default profile—Select the profile you want to automatically activate when your
phone is connected to the charger.
Lights— Select On or Automatic to keep the phone lights always on or to shut off
automatically after several seconds.
Hearing aid
You can configure your device to optimize sound quality when coupled with a
hearing aid that is set to T-coil mode.
In the standby mode, select Menu > Settings > Enhancements > Hearing aid >
T-coil hearing aid mode > On or Off.
Only activate the T-coil hearing aid mode when using your device with a hearing
aid or it may impact the audio performance of the device.
94
FCC DRAFT ONLY
Settings
■ Security
To access Security for the first time, you must enter the preset lock code. By
default, the preset lock code is the last four digits of your phone number.
Depending on your wireless service provider, the preset lock code may be a four
digit number such as 1234 or 0000. If none of these work, contact your wireless
service provider for help.
Phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When phone lock is
activated, Phone locked is displayed each time you turn your phone on.
When the device is locked, you can still call the official emergency number
programmed into your phone.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Phone lock and one of the following:
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power-up—Turns on the phone lock feature the next time you turn the
phone on.
If you select Lock now, you must enter your lock code before the phone will
function normally. After the lock code is accepted, your phone functions
normally.
Call not allowed appears if you attempt to place a call while your phone is locked.
To answer a call with phone lock on, select Answer, or press the call key.
Allowed number if lock active
With phone lock on, the only outgoing calls you can make are to the emergency
number programmed into your phone (for example, 911) and the numbers stored
in the Allowed no. if lock active location.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Allowed no. if lock active > Assign.
FCC DRAFT ONLY
95
Settings
4. Enter the phone number, or select Search to retrieve the number from the
phone book; select OK.
To place a call to an allowed number when the phone is locked, enter the allowed
number and press the call key.
Change lock code
When changing the lock code, avoid using codes similar to emergency numbers
such as 911 to prevent accidental dialing of an emergency number.
By default, the preset lock code is the last four digits of your phone number.
Depending on your wireless service provider, the preset lock code may be a
four-digit number such as 1234 or 0000. If none of these work, contact your
wireless service provider for help.
If you enter an incorrect lock code five times in a row, your phone may ask you for
the security code. By default, the security code is the five-digit number, 12345.
Note: If you enter the wrong lock code five times in succession, your
phone will not accept your current lock code for 5 minutes. This occurs
even if when you power down the phone between incorrect attempts.
To change the phone lock code, do the following:
1. In the standby mode, select Menu > Settings > Security.
2. Enter the current lock code, and select OK.
3. Select Change lock code.
4. Enter the new lock code (only 4 characters), and select OK.
5. Enter the new lock code again for verification, and select OK.
When you change your lock code, make sure to remember it. If necessary, write it
down and store it in a safe place away from your phone. Avoid entering a lock
code similar to emergency numbers to prevent accidental emergency calls.
Call restrictions
Call restrictions allows you to block or allow numbers for incoming or outgoing
calls.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Call restrictions and the type of calls you wish to restrict:
96
FCC DRAFT ONLY
Settings
Restrict outgoing calls—Set restrictions on making calls.
Restrict incoming calls—Set restrictions on receiving calls.
4. Select whether to block or allow numbers:
Blocked numbers—Set numbers that are blocked on incoming calls, allowing
all other numbers. When a number is blocked, the call is sent to voice mail.
Allowed numbers—Set numbers that are allowed, blocking all other numbers.
5. To modify the restriction list, select from the following options:
Select—Add numbers to the restriction list.
Add restriction—Add a restriction to a number (unavailable if memory is full).
Edit—Edit a restriction on a number.
Delete—Delete a number from restriction list.
When calls are restricted, calls may be possible to the official emergency number
programmed into your device.
Voice privacy
Voice privacy is a network service, and its function depends on a variety of
services. Contact your service provider for more information.
If your wireless service provider supports this feature, the voice privacy feature
protects the privacy of your current phone conversation from other callers
placing phone calls on your same network.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Voice privacy > On or Off.
■ Application settings
The Application settings menu changes game and application settings.
In the standby mode, select Menu > Settings > Application settings one of the
following:
Application sounds > On or Off—Play sounds during an application.
Application lights > Application defined or Default—Play lights during an
application.
Application vibration > On or Off—Vibrate phone duing an application.
FCC DRAFT ONLY
97
Settings
■ Network
The menu options you see in your phone are based on your service provider’s
network. The network determines which options actually appear in the phone
menu. Check with your service provider for more information.
The Network menu customizes the way your phone chooses a network in which
to operate while you are within or outside of your primary or home system. Your
phone is set to search for the most cost-effective network. If your phone cannot
find a preferred network, it selects a network automatically based on the option
you choose in the Network menu.
Roaming options
In the standby mode, select Menu > Settings > Network > Roaming options and
one of the following.
Home only—You can make and receive calls in your home area only.
Automatic—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
Automatic A—The phone automatically searches for service in another digital
network. The roaming rate applies when not in the home service area.
Automatic B—The phone automatically searches for service in another digital
network. If one is not found, the phone uses analog service. The roaming rate
applies when not in the home service area.
Mode
To choose whether your phone will use digital or analog service, in the standby
mode, select Menu > Settings > Network > Mode and one of the following.
Digital preferred—You prefer to make calls on a digital network, but will find
another network, if necessary.
Analog only—You can make and receive calls on an analog network only.
Analog per call—You can select an analog network on a call to call basis.
IS-95 per call—You can select an IS-95 network on a call to call basis.
Digital only—You can make and receive calls on a digital network only.
98
FCC DRAFT ONLY
Settings
■ Network services
The following features are network services. See also "Network services," p. 7.
Store a feature code
Network feature setting allows you to activate network services in your phone
using feature codes received from your service provider.
1. In the standby mode, select Menu > Settings > Network services > Network
feature setting.
2. Enter the feature code from your service provider (for example, *900 for
activating Forward if busy), and select OK.
3. Select Call forwarding.
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if busy), select Activate.
The activated feature code is now stored in your phone, and you are returned to
the Feature code: prompt. Continue entering other feature codes (for example,
*900 to cancel Forward if busy), or press the end key to return to standby mode.
When you enter a network feature code successfully the feature becomes visible
in the Network services menu.
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability and information.
To activate, do the following:
1. In the standby mode, select Menu > Settings > Network services > Call
forwarding and one of the following:
Forward all calls—Forwards all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you
are unable to answer. You can set a delay before forwarding takes place.
Forward if out of reach—Forward incoming calls when your phone is off.
2. Select Activate.
FCC DRAFT ONLY
99
Settings
3. Enter the number to which your calls, data, or other information are
forwarded, and select OK.
To cancel, in the standby mode, select Menu > Settings > Network services > Call
forwarding > Cancel all call forwarding.
Cancel all call forwarding may affect your ability to receive voice mail messages.
Contact your wireless provider for specific details.
Call waiting
Call If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can accept, reject, or ignore the
incoming call.
To activate, in the standby mode, select Menu > Settings > Network services >
Call waiting > Activate.
During a call, select Answer or press the call key to answer the waiting call. The
first call is put on hold. Press the end key to end the active call.
To cancel, in the standby mode, select Menu > Settings > Network services > Call
waiting > Cancel.
Send my caller ID
If your wireless service provider supports this feature, you can prevent your
number from appearing on the receiving party’s caller ID.
In the standby mode, select Menu > Settings > Network services > Send my
caller ID > Yes or No.
My number selection
In the standby mode, select Menu > Settings > Network services > My number
selection. This feature is carrier dependent.
■ Restore factory settings
You can reset some of the menu settings to their original values. Data that you
have entered or downloaded is not deleted (for example, entries in your contacts
list are not affected).
1. In the standby mode, select Menu > Settings > Restore factory sett.
2. Enter the lock code, and select OK.
100
FCC DRAFT ONLY
Settings
Note: Depending on your wireless service provider, your device may
request the security code (defaulted to 12345) instead of the lock code.
■ Phone details
You can view the current detials of your phone. In the standby mode, select
Menu > Settings > Phone details and one of the following options:
User details—Shows the phone’s current number details.
Version details—Shows the hardware, software and browser version information
for the phone.
System details—Shows the digital network the phone is on.
Icon details—Shows the icons used.
FCC DRAFT ONLY
101
Organizer
11. Organizer
Your phone contains features to help organize your everyday life, including an
alarm clock, calendar, calculator, countdown timer, and stopwatch.
■ Alarm clock
Set an alarm
The alarm clock is based on the phone clock. It sounds an alert any time you
specify and even works if the phone is turned off.
1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time.
2. Enter the time for the alarm in hh:mm format, and select OK.
3. Select am or pm if 12-hour clock format is on.
Alarm on appears briefly in the display, and
appears in standby mode.
If you need to reset the alarm select Menu > Organizer > Alarm clock > Alarm
time > On from the standby mode.
To turn off the alarm, select Menu > Organizer > Alarm clock > Alarm time > Off
from the standby mode.
Repeat alarm
You can set the alarm to repeat every day or only on certain days of the week.
1. In the standby mode, select Menu > Organizer > Alarm clock > Repeat
alarm > On.
2. Check the day or days of the week you wish to repeat the alarm, and select
Mark. Use Unmark to remove a day.
3. Select Done when you have added all desired days.
If you need to revise the days for a repeated alarm, select Menu > Organizer >
Alarm clock > Repeat alarm > Repetition days from the standby mode.
If you need to stop a repeated alarm select Menu > Organizer > Alarm clock >
Repeat alarm > Off from the standby mode.
102
FCC DRAFT ONLY
Organizer
Set the alarm tone
You can set which tone is played when the alarm sounds.
In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone and
one of the following:
Standard—Select the default alarm.
Radio—Select the radio as the alarm.
Ringing tone—Select a ring tone as the alarm.
Open Gallery—Select a file from the Gallery as the alarm.
Set the snooze time-out
You can set the Snooze time-out for the alarm.
In the standby mode, select Menu > Organizer > Alarm clock > Snooze time-out
and choose a snooze time.
When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the
currently active profile), and lights up.
With the phone on, select Stop to shut the alarm off or Snooze. If you select
Snooze, the alarm stops for 10 minutes.
If you do not press a key, the alarm stops (snoozes) for the Snooze time-out, then
sounds again.
If the alarm time is reached while the phone is switched off, the phone switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the phone for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
Turn an alarm off
In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > Off.
■ Calendar
The calendar keeps track of reminders, calls you need to make, meetings, memo,
and birthdays. It can even sound an alarm for any of these events.
Monthly view provides an overview of the selected month and weeks. You can
also jump to a specific date. Any days or dates that appear in bold font contain
FCC DRAFT ONLY
103
Organizer
calendar notes such as a meeting or reminder. A short summary of notes for the
day appear at the bottom of the screen.
Open calendar
In the standby mode, select Menu > Organizer > Calendar.
To move the cursor in the calendar view, use the scroll keys.
Calendar options
In the standby mode, select Menu > Organizer > Calendar > Options and one of
the following:
Week view—View your calendar by weeks. To return to month view select Back,
while in the Week view.
Make a note—Create a note on the selected date.
Go to date—Jump to a specific date. Enter the date (for example, 15/07/2005),
and select OK.
Go to today—Jump to the current date.
Settings—Modify the calendar settings.
Go to to-do list—Go directly to your to-do list.
Delete all notes—Delete all calendar notes.
Make a calendar note
You can make a calendar note for a specific date. You can choose from five types
of notes. Your phone asks for further information depending on which note you
select. You can also set an alarm for your note.
1. In the standby mode, select Menu > Organizer > Calendar.
2. Highlight the date for which you want to make a note. Scroll or select Go to
date.
3. Select Options > Make a note and one of the following
Meeting—Enter the subject, and select Save. Enter a location, and select Save.
Enter a start and end time. Choose an alarm option.
Call—Enter the phone number, and select Save. Enter a name, and select
Save. Enter a time. Choose an alarm option. You can also select Options >
Find to search your contacts.
104
FCC DRAFT ONLY
Organizer
Birthday—Enter the person’s name, and select Save. Enter the year of birth.
Choose an alarm option.
Memo—Enter the subject, and select Save. Enter an start and end date.
Choose an alarm option.
Reminder—Enter the reminder, and and select Save. Choose an alarm option.
View calendar notes (day view)
You can view the calendar notes for a day.
1. In the standby mode, select Menu > Organizer > Calendar.
2. Scroll to the date you want to view or select Options > Go to date. Days with
notes appear in bold type.
3. Select View to see the list of notes for that day.
To view a specific note, highlight the note, and select View again. If there are no
notes for that date, select Add to create a new calendar note.
Options while viewing a day
When viewing a day’s list of note, you can highlight a note, select Options and
one of the following:
Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Use detail—Use a detail contained in the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, bi-weekly,
monthly, and yearly). Repeat is not available forBirthday note.
Go to date—Jump to another date on your calendar.
Go to today—Return to the current date.
Send note > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send a
calendar note in calendar format (vCal), in a text message, in a multimedia
message, or directly to another device.
Copy—Copy the note. You can paste the note to another date.
Settings—Modify the calendar settings.
FCC DRAFT ONLY
105
Organizer
Go to to-do list—Go directly to your to-do list.
Send a calendar note
1. In the standby mode, select Menu > Organizer > Calendar.
2. Highlight the note you wish to send, and select Options > Send note > Send
as message, Via calendar, Via infrared, or Via Bluetooth to send the calendar
note in calendar format (vCal), in a text message, in a multimedia message, or
directly to another device.
Receive a note in calendar format (vCal)
When you receive a calendar note in calendar-to-calendar format (vCal), your
phone displays Calendar note received.
Select Show to view the calendar note. Select Save to save the note to your
calendar or Options > Discard to discard the note.
Modify calendar settings
In the standby mode, select Menu > Organizer > Calendar > Options > Settings
and one of the following:
Set the date—Enter the current date, and select OK.
Set the time—Enter the current time, and select OK.
Time zone—Select your current time zone.
Date format—Select your preferred date format.
Date separator—Select your preferred date separator.
Time format—Select your preferred time format.
Default view—Select a monthly or weekly view.
Week starts—Select the day the week starts.
Auto-delete notes—Select when to delete past notes.
■ Notes
You can write text notes with the Notes. You can also send notes via text
message, infrared, or Bluetooth.
106
FCC DRAFT ONLY
Organizer
Open notes
In the standby mode, select Menu > Organizer > Notes. You see your current list
of notes.
If there are no notes, select Add to create your first note. If there are existing
notes, highlight a note, and select View.
Make a note
Initial note
In the standby mode, select Menu > Organizer > Notes > Add. Create your note,
and select Save.
Additional notes
In the standby mode, select Menu > Organizer > Notes > Options > Make a note.
Create your note, and select Save.
Create note options
When you create a note, the following options are available:
Insert time and date—Adds the time and date to your note.
Close—Returns you to the notes list.
Insert smiley—Inserts a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. Option only appears when predictive text
is on.
Insert symbol—Inserts a special character into your message. Option only appears
when predictive text is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This displays only when predictive text is on.
Send a note
1. In the standby mode, select Menu > Organizer > Notes.
2. Highlight the note you wish to send, and select Options > Send note > Send
as message, Via infrared, or Via Bluetooth to send the note in a text message,
in a multimedia message, or directly to another device.
FCC DRAFT ONLY
107
Organizer
Notes options
In the standby mode, select Menu > Organizer > Notes > Options and one of the
following:
Make a note—Create a new note.
Delete—Delete the note you selected.
Edit—Edit the note you selected.
Use detail—Use a detail contained in the note.
Send note > Send as message, Via infrared, or Via Bluetooth—Send a note in a
text message, in a multimedia message, or directly to another device.
Delete all notes—Delete all notes.
The note options appear only when you have created one or more notes.
■ To-do list
Use the To-do list feature to keep track of your tasks. You can save a task or
errand as a to-do note, select a priority level for the to-do note, and mark it as
done when you have completed it. You can sort the to-do notes by priority or by
date.
Open to-do list
In the standby mode, select Menu > Organizer > To-do list. You see your current
to-do list.
If there are no to-do tasks, select Add to create your first to-do note. If there are
existing to-do notes, highlight a to-do note, and select View.
Make a to-do list note
Initial to-do list note
In the standby mode, select Menu > Organizer > To-do list > Add. Enter the
subject, and select Save > High, Medium, or Low.
Additional to-do list notes
In the standby mode, select Menu > Organizer > To-do list > Options > Add.
Enter the subject, and select Save > High, Medium, or Low.
Create to-do list note options
When you create a to-do note, the following options are available:
108
FCC DRAFT ONLY
Organizer
Insert smiley—Insert a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not
appear in the predictive text dictionary. This displays only when predictive text is
on.
Insert symbol—Insert a special character into your message. This displays only
when predictive text is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This displays only when predictive text is on.
Edit to-do list notes
In the standby mode, select Menu > Organizer > To-do list > View > Edit. Edit the
subject, select Save.
View to-do list notes
In the standby mode, select Menu > Organizer > To-do list > View.
Deadline—Change the deadline of the to-do note.
Mark note as done or Mark as not done—Indicate whether the to-do note is
completed or not.
Delete—Delete the to-do note.
Use detail—Use a detail contained in the note.
Edit priority—Change the priority to High, Medium, or Low.
Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the
to-do note in calendar format (vCal), in a text message, in a multimedia message,
or directly to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do note to your calendar.
Send a to-do list note
1. In the standby mode, select Menu > Organizer > To-do list.
2. Highlight the note you wish to send, and select Options > Send > Send as
message, Via calendar, Via infrared, or Via Bluetooth to send the to-do note in
FCC DRAFT ONLY
109
Organizer
calendar format (vCal), in a text message, in a multimedia message, or
directly to another device.
To-do list options
In the standby mode, select Menu > Organizer > To-do list > Options and one of
the following:
Add—Create a new to-do note.
Delete—Delete the to-do note you selected.
Mark note as done or Mark as not done—Indicate whether the to-do note is
completed or not.
Use detail—Use a detail contained in the note.
Sort by deadline or Sort by priority—Sort the to-do list by either date or priority.
Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the
to-do note in calendar format (vCal), in a text message, in a multimedia message,
or directly to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do note you selected to your calendar.
Delete done notes—Save the to-do note you selected to your calendar.
Delete all notes—Delete all notes.
The to-do list options appear only when you have created one or more notes.
■ Calculator
The calculator in your phone adds, subtracts, multiplies, divides, calculates the
square and the square root, changes the sign of the number entered, and
converts currency values.
Note: This calculator has a limited accuracy and is designed for simple
calculations.
Use calculator
1. In the standby mode, select Menu > Organizer > Calculator.
2. Enter the first number in the calculation.
Press # for a decimal point if necessary.
110
FCC DRAFT ONLY
Organizer
Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)
characters. Pause briefly to select the displayed character.
3. Enter the second number in your calculation.
4. Select Equals.
To perform a square or square root calculation, enter the number, and select
Options > Square or Square root. Select Options > Change sign, or scroll to
change the sign of your result.
Use currency converter
You can convert foreign currency to domestic, or vice versa.
1. In the standby mode, select Menu > Organizer > Calculator.
2. Enter a currency amount to convert.
3. Select Options > To home or To foreign.
To home—converts foreign currency to domestic currency.
To foreign—converts domestic currency to foreign currency.
If you have not done so already, you are prompted to enter the exchange rate.
4. Enter the exchange rate (press # to insert a decimal), and select OK.
Edit exchange rate
You can edit the exchange rate at any time.
Note: When you change base currency, you must enter the new rates
because all previously set exchange rates are set to zero.
1. In the standby mode, select Menu > Organizer > Calculator > Options >
Exchange rate and one of the following:
Foreign units in home—The number of home units it takes to make one unit of
foreign currency.
Home units in foreign—The number of foreign units it takes to make one unit
of your home currency.
2. Enter the exchange rate, and select OK.
FCC DRAFT ONLY
111
Organizer
■ Countdown timer
The countdown timer in your device enables you to enter a specific time (up to 99
hours, 59 minutes, and 59 seconds). When the time runs out, your device sounds
an alarm.
The countdown timer only works when the phone is on. Once you turn off your
phone, the timer is no longer active.
Set the normal timer
1. In the standby mode, select Menu > Organizer > Countdown timer > Normal
timer.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
appears in standby mode when the countdown timer is set.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its
lights. Press any key during the alarm to stop the timer. After 30 seconds the
timer alert expires automatically.
Set an interval timer
Create an interval timer
You can create interval timers for timers that you use often.
1. In the standby mode, select Menu > Organizer > Countdown timer > Interval
timer > Add new timer.
If you already have one interval timer, select a timer and Add new timer.
2. Enter a name for the timer, and select Save.
3. Enter a name for the period, and select Save. Each interval timer can have 10
periods.
4. Enter the time (in hh:mm:ss format) for the period, and select OK. The period
is saved. To continue setting the timer, select the period and one of the
following:
Edit period—Edit the period you selected.
Add period—Add a new period to the timer.
Delete period-Delete the period you selected.
112
FCC DRAFT ONLY
Organizer
Start timer—Start the timer.
When you start
appears in standby mode when the countdown timer is set.
When the time runs out, your phone sounds an alarm, displays the timer note,
and flashes its lights. Press any key during the alarm to stop the timer. After
30 seconds the timer alert expires automatically.
Interval timer options
To modify or use an existing interval timer:
1. In the standby mode, select Menu > Organizer > Countdown timer > Interval
timer.
2. Select an interval timer and one of the following options:
Start timer—Start the timer.
View timer—View the all the periods for the interval timer.
Edit timer—Edit the interval timer.
Add new timer—Add a new interval timer.
Delete timer—Delete the interval timer.
Change the timer
After you have set a timer, you can change the time.
1. In the standby mode, select Menu > Organizer > Countdown timer or interval
timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
Stop the timer before the alarm sounds
After you have set the timer, you can stop the timer.
In the standby mode, select Menu > Organizer > Countdown timer or interval
timer > Stop timer.
■ Stopwatch
Your phone has a stopwatch that can be used to track time. The stopwatch
displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:ss
format.
FCC DRAFT ONLY
113
Organizer
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure split or lap time
Use the split time or lap time functions for activities where you need to pace
yourself.
1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing or
Lap timing > Start.
Split timing—Use the split time function for such activities as a long distance
race when you need to pace yourself. Select Split to note the lapsed time. The
timer continues to run and the split time appears below the running time.
Each time you select Split, the new measured time appears at the beginning
of the list.
Lap timing—Use the lap time function when you want to track how long it
takes to complete each cycle or lap. Select Lap to note the lap time. The clock
stops, then immediately restarts from zero. The lap time appears below the
running time. Each time you select Lap, the new measured time appears at
the beginning of the list.
2. Select Stop to end timing and display total time.
Save a time
To save a time while the clock is running, select Stop > Save, enter a name for the
measurement, and select OK. If you do not enter a name, the total time is used as
the default title for the lap or split time.
Stopwatch options
In the standby mode, select Menu > Organizer > Stopwatch and one of the
following:
Continue—Continues to measure time. Only appears if clock is stopped and you
are returning to stopwatch screen.
Show last time—View the last measured time.
Split timing—Use the split time function.
Lap timing—Use the lap time function.
View times—Browse saved times.
114
FCC DRAFT ONLY
Organizer
Delete times > One by one or Delete all—Delete saved times.
Operation note
If you press the end key and return to the standby mode, the clock continues to
run in the background, and
appears in the upper left corner of the screen.
To return to the Stopwatch screen, do the following:
1. In the standby mode, select Menu > Organizer > Stopwatch > Continue.
2. To stop the clock, select Stop.
FCC DRAFT ONLY
115
Mobile web
12. Mobile web
Mobile web is a carrier-dependent feature and a network service. See "Network
services," p. 7, for more information.
Your phone has a built-in browser you can use to connect to selected services on
the mobile Internet. If your wireless service provider supports this feature, you
can view weather reports, check news or flight times, view financial information,
and much more. The Web browser on your phone can display WAP-based
content.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
The security icon does not indicate that the data transmission between the
gateway and the content server (or place where the requested resource is stored)
is secure. The service provider secures the data transmission between the
gateway and the content server.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Mobile Internet access
Because mobile Internet content is designed to be viewed from your phone, your
wireless provider is now your mobile Internet service provider as well.
Your wireless provider has created a home page and set up your browser to go to
this page when you log on to the mobile Internet. Once at your service provider’s
home page, you may find links to a number of other sites.
It should not be necessary to manually configure the browser on your phone.
Normally this is done by your wireless provider when you subscribe to the
feature. Contact your wireless provider if you have problems using the browser.
■ Sign on to the mobile Internet
In the standby mode, select Menu > Mobile web.
After a brief pause, your phone attempts to connect to your wireless provider’s
home page. If you receive an error message, your phone may not be set up for
116
FCC DRAFT ONLY
Mobile web
browsing. Contact your wireless provider to make sure that your phone is
configured properly.
■ Navigate the mobile Internet
Since your phone screen is much smaller than a computer screen, mobile Internet
content is displayed differently than you may be accustomed to seeing. This
section contains guidelines for using phone keys to navigate a WAP site.
Phone keys
• To browse the WAP site, scroll up or down.
• Select a highlighted item.
• To enter text, press # to switch text input modes, and then press 0-9.
• To enter special characters, press *.
Even if the browser page does not have a Back option, you can also press the end
key to go back one page.
Receive a call while online
Depending on your wireless service provider, you may still be able to receive a
voice call while using the WAP browser.
• To answer the incoming call, press the call key.
• To reject the incoming call, press the end key.
After you end your voice call, the mobile Internet connection automatically
resumes.
If your wireless service provider does not support incoming calls while browsing,
incoming calls are automatically forwarded to voice mail.
Make an emergency call while online
You can end your data connection and make an emergency call.
1. To close your mobile Internet connection, press the end key.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the emergency number for your present location (for example, 911).
Emergency numbers vary by location.
FCC DRAFT ONLY
117
Mobile web
4. Press the call key.
Clear the cache and disconnect
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache. To empty the cache while in the browser menu, select
Navigate > Advanced > Clear > Cache from the home page. The cache also clears
when you press and hold the end key to power off your device.
To close your mobile Internet connection while browsing, press the end key.
118
FCC DRAFT ONLY
Extras
13. Extras
■ Games
In the standby mode, select Menu > Extras > Games to display the games on your
device.
■ Collection
Collections is a network service. See "Network services," p. 7. If your wireless
service provider supports this feature, you will find useful applications
preinstalled on your device. Also, you can manage and download new Java
applications that may be offered by your wireless service provider.
An application may require a few seconds to load. When you open an application,
wait for the launch screen to disappear. At that point, the application is ready.
Leaving applications running in the background increases the demand on battery
power and reduces the battery life.
In the standby mode, select Menu > Extras > Collection and an application.
Note: Only install applications from sources that offer adequate
protection against harmful software.
FCC DRAFT ONLY
119
PC connectivity
14. PC connectivity
■ PC data transfer
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using a Bluetooth
connection. For more information, see "Bluetooth connectivity," p. 87.
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using an infrared
connection. For more information, see "Infrared connectivity," p. 90.
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using a CA-53 USB data
cable. For more information, see "USB data cable transfer," p. 91.
■ Nokia PC Suite
Nokia PC Suite software is available for the Nokia 6265 or Nokia 6265i. Nokia PC
Suite is a collection of powerful tools that you can use to manage your phone
features and data. Each component is a separate program that includes online
helps.
Nokia PC Suite software, installation instructions, and other documentation is
provided free of charge and can be downloaded from the software downloads of
the Nokia web site: www.nokiausa.com/pcsuite.
Some of the features in your phone require network support. Contact your service
provider for availability and configuration instructions.
120
FCC DRAFT ONLY
Enhancements
15. Enhancements
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with this particular model. The
use of any other types may invalidate any approval or warranty, and
may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord
A few practical rules about accessories and enhancements:
• Keep all accessories and enhancements out of the reach of small children.
• When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
• Installation of any complex car enhancements must be made by qualified
personnel only.
Power
• Standard 1150 mAh Li-Ion Battery (BL-6C)
• Compact Charger (AC-3)
• Travel Charger (AC-4)
• Mobile Charger (DC-4)
• Charger Adapter (CA-44)
Use the CA-44 charger adapter to connect the phone with Nokia chargers
with a larger barrel size, including ACP-7, ACP-8, ACP-9, ACP-12, AC-1
(retractable charger), and LCH-12 (mobile charger).
USB data cable
• Connectivity Cable (CA-53)
FCC DRAFT ONLY
121
Enhancements
Hands-free
• Headrest Hands-free (BHF-3)
• CDMA Headrest Hands-free (BHF-4)
• Easy to Use Car Handfree (HF-3)
• Advanced Plug-in Car Handfree (HF-6)
• Wireless Plug-in Car Hands-free (HF-6W)
Headsets
• Mono Headsets (HDB-4, HS-5, HS-6, HS-8, HS-9)
• Stereo Headsets (HDS-3, HS-3, HS-23)
• Wireless Mono Headsets (HDW-3, HS-4W, HS-11W, HS-21W, HS-36W,
HS-37W))
• Wireless Image Headsets (HS-13W)
• Wireless Stereo Headsets (HS-12W)
Miscellaneous
• Inductive Loopset (LPS-4)
• TTY Adapter (HDA-10)
• Advanced Car Kit (CK-1W)
• Wireless Car Kit (CK-7W)
• Digital Pen (SU-1B)
• Audio Adapter (AD-15)
• Music Stand (MD-1)
122
FCC DRAFT ONLY
Reference information
16. Reference information
This section provides information about your phone batteries, enhancements,
chargers, safety guidelines, and technical information. Be aware that the
information in this section is subject to change as batteries, chargers, and
enhancements change.
■ Batteries and chargers
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. When the talk and standby times are noticeably shorter
than normal, replace the battery. Use only Nokia approved batteries, and
recharge your battery only with Nokia approved chargers designated for this
device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger and
then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
FCC DRAFT ONLY
123
Reference information
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging and inspect the
hologram label using the following steps:
Successful completion of the three steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that your battery is
not an authentic original Nokia battery, you should refrain from using it and take
it to the nearest authorized Nokia service point or dealer for assistance. Your
authorized Nokia service point or dealer will inspect the battery for authenticity.
If authenticity cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements logo
when looking from another angle.
2. When you angle the hologram left, right, down,
and up, you should see 1, 2, 3, and 4 dots on each
side respectively.
124
FCC DRAFT ONLY
Reference information
3. Scratch the side of the label to reveal a 20-digit
code, for example 12345678919876543210. Turn
the battery so that the numbers are facing upwards.
The 20-digit code reads starting from the number at
the top row followed by the bottom row. Confirm
that the 20-digit code is valid by following the
instructions at www.nokia.com/batterycheck.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit www.nokia.com/battery.
FCC DRAFT ONLY
125
Care and maintenance
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, remove the battery and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device other than as instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity
sensor, and light sensor lenses.
• Use only the supplied or an approved replacement antenna. Unauthorised
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as contacts and
calendar notes, before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
126
FCC DRAFT ONLY
Additional safety information
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area and always
switch off your device when its use is prohibited or when it may cause
interference or danger. Use the device only in its normal operating positions. This
device meets RF exposure guidelines when used either in the normal use position
against the ear or when positioned at least 2.2 centimeters (7/8 inches) away
from the body. When a carry case, belt clip or holder is used for body-worn
operation, it should not contain metal and should position the device the abovestated distance from your body.
In order to transmit data files or messages, this device requires a good quality
connection to the network. In some cases, transmission of data files or messages
may be delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the
device, and persons with a hearing aid should not hold the device to the ear with
the hearing aid. Do not place credit cards or other magnetic storage media near
the device, because information stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your device in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of
15.3 centimeters (6 inches) be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
FCC DRAFT ONLY
127
Additional safety information
recommendations of Wireless Technology Research. Persons with pacemakers
should:
• Always keep the device more than 15.3 centimeters (6 inches) from the
pacemaker;
• Not carry the device in a breast pocket; and
• Hold the device to the ear opposite the pacemaker to minimise the potential
for interference.
If you suspect interference, switch off your device and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include
areas where you would normally be advised to turn off your vehicle engine.
128
FCC DRAFT ONLY
Additional safety information
Sparks in such areas could cause an explosion or fire resulting in bodily injury or
even death. Switch off the device at refuelling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas, chemical plants or where blasting
operations are in progress. Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as
propane or butane), and areas where the air contains chemicals or particles such
as grain, dust, or metal powders.
■ Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call:
1. If the phone is not on, switch it on. Check for adequate signal strength.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless phone may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
■ Certification Information (SAR)
THE MODEL PHONE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF)
energy recommended by international guidelines (ICNIRP). These limits establish
permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards and
guidelines include a substantial safety margin designed to assure the safety of
FCC DRAFT ONLY
129
Additional safety information
the public, regardless of age and health and to account for any variations in
measurements.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the international
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be well below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value when tested
according to international testing procedures for use at the ear is 0.78 W/kg.
SAR values may vary depending on national reporting and testing requirements
and the network band. Use of device accessories and enhancements may result in
different SAR values. Additional SAR information may be provided under product
information at www.nokia.com.
USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg
averaged over 1 gram of tissue. This device model has also been tested against
this SAR limit. The highest SAR value reported under this standard during product
certification for use at the ear is 1.17 W/kg and when properly worn on the body
is 1.05 W/kg. Information about this device can be found on the FCC's website at
www.fcc.gov/oet/fccid by searching the equipment authorization system using
FCC ID: QMNRM-66.
■ Technical information
Feature
Specification
Dimensions
Width 48 mm; Length 98 mm; Depth 22 mm
Weight
124 g with BL-6C Li-Ion Battery
Wireless networks
CDMA 800 and 1900 Mhz, AMPS, GPS, and Bluetooth
Volume
87 cc
Frequency range (Tx)
AMPS: 824.04—848.97 MHz
PCS: 1851.25—1908.75 MHz
Cellular: 824.70—848.37 MHz
130
FCC DRAFT ONLY
Additional safety information
Feature
Specification
Frequency range (Rx)
AMPS: 869.04—893.97 MHz
PCS: 1931.25—1988.75 MHz
Cellular: 869.70—893.37 MHz
GPS frequency
Bluetooth
1575.42 MHz
■ Battery information
This section provides information about battery charging times with the Compact
Charger (AC-3), the Travel Charger (AC-4), talk-times, and standby times. Be
aware that the information in this section is subject to change. For more
information, contact your service provider.
Charging times
The following charging times are approximate with the BL-6C 1150 mAh Li-Ion
battery:
Travel Charger (AC-4): up to 1 hour 45 minutes
Compact Charger (AC-3): up to 3 hours
Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3 to 4 hours (digital)
Standby time: 8 to 12 days
FCC DRAFT ONLY
131
Index
Index
NUMERICS
1-touch dialing 57, 79
Å
abbreviated dialing 81
active profile 74
alarm clock 102
repeating 102
setting 102
tone 103
turning off 103
allowed number if lock active 95
analog service 98
answer calls 22
when slide opened 79
antenna 17
anykey answer 79
applications
collection 119
settings 97
automatic
keyguard 83
redial 79
update of service 80
update of time and date 78
voice mail 44
back cover
removing 18
replacing 19
backlight time-out 76
banner 75
battery 17, 123, 131
authentication guidelines 124
charging 19
charging times 131
removing 18
replacing 18
talk and standby times 131
Bluetooth connection 87
paired devices 89
setting up 88
settings 89
132
FCC DRAFT ONLY
Index
business cards 53
calculator 110
currency converter 111
using 110
calendar 103
making notes 104
opening 104
options 104
receiving notes 106
sending notes 106
settings 106
viewing 105
call forwarding 99
call log, see logs
call register, see logs
call settings 79
call summary 83
call time 47
call timers 47
call waiting 100
caller
groups 54
ID, send my 100
calling cards 80
calls
answering 22
conference 21
duration of 47
making 21
mute phone during 23
options during 23
restrictions 96
show times on display 83
silencing 22
camera 59
changing options 62
photo sequence 61
recording videos 61
settings 62
taking photos 59
using self-timer 60
carrier selection provisioning 22
certification information (SAR) 129
change lock code 96
charger 94, 123
connecting 19
times 131
FCC DRAFT ONLY
133
Index
clock settings, see time and date
color schemes 76
conference calls 21
confirmation tones 77
connectivity 87
contacts 50
adding 51
deleting 58
editing 53
searching 50
settings 54
viewing 50
countdown timer 112
changing 113
intervals 112
normal 112
stopping 113
CSP, see carrier selection provisioning
currency converter 111
custom profile 74
customer support, see Nokia Care
data
cable, see USB data connection
calls 82
duration of 48
transfer 120
date settings, see time and date
dialed numbers 46
dialing codes 51
digital service 98
display
main menu 14
settings 75
distribution lists 42
creating 42
managing 42
DTMF tones, see touch tones
electronic serial number 9
emergency calls 117, 129
end calls 22
when slide closed 80
enhancements 93
approved 121
134
FCC DRAFT ONLY
Index
equalizer 73
activating 73
creating custom 73
ESN, see electronic serial number
exchange rate 111
extras 119
fax calls 82
duration of 48
FCC information 130
feature codes 99
file transfer 92
FM radio, see radio
folders, see gallery
gallery 65
opening folders 65
options 66
games 119
global positioning system 79
go to functions 15
organize 16
select 16
HAC, see hearing aid compatibility
handsfree settings 93
headset
connecting 20
settings 93
hearing aid compatibility 130
hearing aid settings 94
help
getting 9
in-phone 15
text activation 15, 85
FCC DRAFT ONLY
135
Index
indicators and icons 12
infrared connection 90
international prefix 81
Internet, see wireless Internet
keyguard
automatic 83
lock and unlock 24
security 85
keypad tones 77
language
phone 83
settings 83
voice playback 83
lap time 114
listen to voice mail 43
location information sharing 79
lock code
changing 96
preset 95
logs 46
clearing 47
dialed numbers 46
missed calls 46
received calls 46
loopset settings 94
loudspeaker 23
main menu display 14
maintenance services 10
make calls 21
making calls
calling cards 81
media player 68
memory
card 84
checking status 84
phone 84
messages
minibrowser, see minibrowser messages
multimedia, see multimedia messages
text, see test messages
136
FCC DRAFT ONLY
Index
voice, see voice messages
mini SD card 20
memory 84
minibrowser
calls, duration of 48
messages 45
missed calls 46
mobile web 116
multimedia messages 34
creating 36, 37
deleting 40
folders 35
reading 37
replying 37
sending 36
settings 40
music player 68
options 69
play tracks 69
mute phone 23
my phone number, display 57
navigation key 84
network
approved for 7
services 7, 99
settings 98
no caller IDs 83
Nokia Care 9, 10
Nokia PC Suite 120
Nokia Web site 10
notes 106
making 107
opening 107
options 108
sending 107
Ö
organizer 102
pairing 89
PC connectivity 120
phone
care and maintenance 126
details 101
keys and parts 11
FCC DRAFT ONLY
137
Index
language 83
locking 95
memory 84
set up your 17
settings 83
photographs 59
PictBridge 91
play
music tracks 69
radio 70
power saver 76
predictive text 26
preferred carrier 82
profiles 74
activating 74
customizing 74
timed 74
quick keys 12
radio 70
options 71
play 70
received calls 46
recording sound 72
register your phone 9
repeating alarm 102
restore factory settings 100
ring
tone for no caller ID 83
volume 77
roaming options 98
safety information 6, 127
battery 131
certification 129
exploxive environments 128
hearing aids 128
operating environment 127
pacemakers 127
vehicles 128
138
FCC DRAFT ONLY
Index
SAR, see specific absorption rate
screen saver 76
scroll method 14
security 15
keyguard 85
settings 95
self-timer, camera 60
send my caller ID 100
sequence of photos 61
set
alarm 102
date 78
time 77
settings 74
shared memory 8
show call time on display 83
sleep mode 76
slide
answer calls 79
end calls 80
snooze time-out 103
specific absorption rate 130
speed dials, see 1-touch dialing
split time 114
standby mode 12
font color 75
settings 75
standby time 131
start-up tone 85
stopwatch 113
lap timing 114
options 114
saving times 114
split timing 114
switch off tone 86
talk time 131
T-coil mode 94
text entry 25
changing language 25
predictive 26
standard 25
text messages 28
creating 29, 30
deleting 33
folders 28
reading 30
replying 30
FCC DRAFT ONLY
139
Index
sending 29
settings 33
templates 30
theme 76
time and date 77
timed profiles 74
to-do list 108
editing 109
making 108
opening 108
options 110
sending 109
viewing 109
tones 77
start-up 85
switch off 86
touch 85
touch tones 85
transfer files 92
TTY/TDD settings 94
turn phone on or off 20
update service, automatic 80
USB data connection 91
data storage 92
default mode 91
printing 91
vibrating alert 77
videos 61
voice
commands 86
playback language 83
privacy 97
recorder 72
voice messages 43
automating 44
listening 43
mailbox number 43
setting up mailbox 43
voice tags 55
assigning 55
deleting 56
modifying 56
using 56
140
FCC DRAFT ONLY
Index
volume
adjusting 23
using loudspeaker 23
wallpaper 75
warning tones 77
wireless Internet
access 116
clear cache 118
disconnect 118
make emergency call while online 117
receive call while online 117
sign on 116
FCC DRAFT ONLY
141
Index
142
FCC DRAFT ONLY

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 140
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0ed4421c-a717-4910-9cdc-ca2c66c89ca1
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:08:18 11:15:46-07:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:08:18 11:15:46-07:00
Document ID                     : uuid:55b97d0b-67d1-4192-b8e6-fdc364667607
Format                          : application/pdf
Creator                         : daniyoun
Title                           : 6265x.ENv1_FCC_Draft_noHAC.fm
Author                          : daniyoun

EXIF Metadata provided by EXIF.tools