Microsoft RM-69 GSM 900/1800/1900 Cellular Telephone w/BT User Manual RM 69 FCC v1
Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/BT RM 69 FCC v1
Contents
- 1. Maual
- 2. Manual
Manual
Nokia 6822 User Guide
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product RM-69 is in
conformity with the provisions of the following Council Directive: 1999/5/EC.
A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/.
PART NO. 9236648, ISSUE NO. 1
Copyright ©2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, Nokia 6822, Pop-Port, and the Nokia Original
Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other
company and product names mentioned herein may be trademarks or trade names of their
respective owners.
Nokia tune is a sound mark of Nokia Corporation.
US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-
2004. Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information contained in this user guide was written for the Nokia 6822
product. Nokia operates a policy of continuous development. Nokia reserves the right to
make changes to any of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
Quick guide
✁
Quick guide
■Actions
Press
Press a key briefly and release it.
Press and hold
Press a key, hold it for two to three seconds, and release it.
Make a call
Enter a phone number, and press Call.
Answer a call
Press Call, or select Options > Answer.
Answer call during call
Press Call.
End a call
Press End or select Options > End call.
Reject a call
Press End to send the call to voice mail.
Mute a call
Select Options > Mute during a call.
Redial
Press Call twice.
Adjust call volume
Move the Five-way joystick to the left or right during a call.
Use in-call menu
Select Options during a call.
Save name and number
Enter a number. Select Save. Enter a name. Select OK.
Use speed dials
Quick guide
✁
Press and hold a key [2–8]. You must assign a key to a number in the
phone book.
Look up a name
Select Names > Search.
Check voice mail
Press and hold the 1 key [contact your service provider for details].
Write text messages
Select Menu > Messages > Text messages > Create message or move
the Five-way joystick to the left. Write the message.
Send text messages
In the message entry screen, select Send. Enter the recipient’s phone
number or search for it in contacts, and select OK. The message
service is dependent on the service provider.
Read new message
If Messages received appears on the display, select Show; then select
the message you want to read.
Reply to a message
Select Reply. Write a reply. Select Send.
Contents
5
Contents
For your safety 6
1. Phone at a glance ........................................................................................ 11
2. SIM card and battery .................................................................................. 12
3. About your phone ........................................................................................ 15
4. Basic operations........................................................................................... 23
5. Phone menu................................................................................................... 25
6. Phone security.............................................................................................. 27
7. Writing text................................................................................................... 29
8. Messages........................................................................................................ 33
9. Instant messages (Chat)............................................................................. 46
10.Call register ................................................................................................... 51
11.Names............................................................................................................. 52
12.Settings .......................................................................................................... 61
13.Gallery............................................................................................................. 68
14.Camera............................................................................................................ 69
15.Organiser........................................................................................................ 71
16.Applications .................................................................................................. 77
17.Web ................................................................................................................. 82
18.Connectivity.................................................................................................. 91
19.PC connectivity............................................................................................. 97
20.Reference information ............................................................................... 99
For your safety
6
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
INTERFERENCE
All wireless phones may be susceptible to interference, which could
affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the phone off near medical
equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference
in aircraft.
SWITCH OFF WHEN REFUELLING
Don't use the phone at a refuelling point. Don't use near fuel
or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Don't use the phone where blasting is
in progress.
USE SENSIBLY
Use only in the normal position as explained in the product
documentation. Don't touch the antenna unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
For your safety
7
WATER-RESISTANCE
Your phone is not water-resistant. Keep it dry.
BACKUP COPIES
Remember to make backup copies or keep a written record of all
important information stored in your phone.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press End as many
times as needed to clear the display and return to the start screen.
Enter the emergency number, then press Call. Give your location.
Do not end the call until given permission to do so.
■About your device
The wireless device described in this guide is approved for use on the EGSM 900
and GSM 1800 and 1900 networks. See ”Phone information” on page 10, to
identify your specific device model. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
■Network Services
To use the device you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to
function. These Network Services may not be available on all networks or you
may have to make specific arrangements with your service provider before you
can utilize Network Services. Your service provider may need to give you
additional instructions for their use and explain what charges will apply. Some
networks may have limitations that affect how you can use Network Services. For
instance, some networks may not support all language-dependent characters
and services.
For your safety
8
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Contact
your service provider for more information.
This wireless device is a 3GPP GSM Release 99 terminal supporting GPRS service,
and is designed to support Release 4 GPRS networks. However, there may be
some compatibility issues when used in some Release 97 GPRS networks. For
more information contact your service provider.
This device supports WAP 2.0 protocols [HTTP and SSL] that run TCP/IP protocols.
Some features of this device require network support for these technologies.
■Shared memory
The device has three different memories. Names, text messages, SMS e-mail,
voice tags, calendar, and notes may share the first memory. The second shared
memory is used by multimedia messages, files stored in Gallery, and
configuration settings. The third shared memory is used by the e-mail application
and Java games and applications. Using one or more of these features may
reduce the memory available for the remaining features sharing the same
memory. For example, saving many Gallery items may use all of the available
memory in the second memory. Your device may display a message that the
memory is full when you try to use a shared memory feature. In this case, delete
some of the information or entries stored in the corresponding shared memory
before continuing.
Welcome
9
Welcome
Congratulations on your purchase of the Nokia 6822 mobile device.
Your device provides many functions that are practical for daily use,
such as a calendar, a clock, an alarm clock, and a built-in camera. The
camera can be used for recording video clips and taking pictures that
you can attach as wallpaper in the standby mode or as thumbnail
pictures in Names. For more information, see ”Camera” on page 69.
Other features on your device are:
• Multimedia messaging, see ”Multimedia messages [MMS] [network
service]” on page 37.
• Instant messages, see ”Instant messages (Chat)” on page 46.
• Presence-enhanced contacts, see ”My presence” on page 54.
• E-mail application, see ”E-mail [network service]” on page 40.
• EDGE [enhanced data rates for GSM evolution], see ”GPRS” on page
95.
• J2ME™ Java 2 Micro Edition, see ”Applications” on page 77.
• XHTML browser, see ”Web” on page 82.
• Bluetooth connectivity, see ”Set up a Bluetooth connection” on page
91.
■Copyright protection
Copyright protections may prevent some images, ringing tones, and
other content from being copied, modified, transferred, or forwarded.
■Contact Nokia
If you ever need to call Nokia Customer Care or your service provider,
you must provide specific information about your device [see ”Phone
information” on page 10].
Whether you call about your device or an enhancement, have the
equipment with you when you call. If a Nokia representative asks a
Welcome
10
specific question about the enhancement, you will have it available for
quick reference.
Nokia support on the web
Check www.nokia.com/support or your local Nokia web site for the
latest version of this user guide, additional information, downloads, and
services related to your Nokia product.
Phone information
Information about your device is
provided on the phone label on the
back of the device under the battery
[see ”Remove the back cover” on
page 12]. The label contains the
model and serial numbers, as well as
the following:
• Phone type [RM-69]
• Phone model [such as Nokia 6822]
• International Mobile Equipment Identity [IMEI]
Phone at a glance
11
1. Phone at a glance
Power key
[1]
Right
selection
key [2]
End key
[3]
Keypad
[4]
Microphone
[5]
Pop-Port
connector
[6]
Charger
port [7]
Call key
[8]
Left
selection
key [9]
Five-way joystick [10]
Display screen [11]
Loudspeaker [12]
Left selection key [keyboard open] [13]
Earpiece [14]
Infrared port [15]
Camera lens [16]
SIM card and battery
12
2. SIM card and battery
The SIM card and its contacts can easily be damaged by scratches or
bending, so be careful when handling, inserting, or removing the card.
Your device and its enhancements may contain small parts. Keep them
out of the reach of small children.
For availability and information on using SIM card services, contact your
SIM card vendor. This may be the service provider or another vendor.
Always switch the device off and disconnect the charger before
removing the battery.
■Remove the back cover
Push the back cover release button toward
the bottom of the device [1] and at the
same time, lift the back cover away from
the device [2].
■Insert the SIM card and battery
Important: Insert the battery exactly as shown in the diagram.
The contacts on the battery must be aligned with the contacts
on the device for the device to operate.
SIM card and battery
13
To release the SIM card holder, slide the card holder to the right [4], and
open it by lifting it up [5].
Insert the SIM card into the SIM card holder [6].
Make sure that the SIM card is properly inserted and that the golden
contact area on the card is facing downward. Close the SIM card holder
[7], and slide it back into place [8].
Direct the back cover toward the locking catches on the front cover [9],
and slide the back cover until it locks into place [10].
SIM card and battery
14
■Charge the battery
Warning: Use only batteries, chargers, and enhancements
approved by Nokia for use with this particular model. The use of
any other types may invalidate any approval or warranty, and
may be dangerous.
Your device is powered by a
rechargeable battery. To charge the
battery:
1. Plug the charger transformer
into a standard ac outlet.
2. Insert the charger output plug
into the round connector at the
bottom end of the device.
After a few seconds, the battery indicator in the display starts to
scroll from bottom to top. If the battery is completely discharged, it
may take a few minutes before the charging indicator appears on the
display or any calls can be made.
You can use the device while the charger is connected.
The BL-5C battery provides up to 3.5 hours of talk time and up to 14
days of standby time. Operation times are estimates and may vary
depending on network conditions, charging, and device use. Charging
the battery with the ACP-12 charger takes approximately 1 hour and 30
minutes while the device is in the standby mode.
For availability of approved enhancements, please check with your
dealer. When you disconnect the power cord of any enhancement, grasp
and pull the plug, not the cord.
About your phone
15
3. About your phone
■In-phone help
Many features have brief descriptions [help text] which can be viewed
on the display. To view the help text, scroll to a feature and wait for
about 15 seconds. Select More to view all of the description [if
necessary] or select Back to exit.
For instructions on how to turn the help text feature on and off, see
”Phone settings” on page 64.
■Start screen [standby mode]
The start screen is home base and indicates that the device is in the
standby mode.
[1] The name of your service provider may appear here.
[2] Audible signal bar—A higher bar indicates a stronger network signal.
[3] Audible battery bar—A higher bar indicates more power in the
battery.
[4] Left selection key—The Left selection key in the standby mode opens
the Go to menu. For more information, see ”Go to options” on page 62.
[5] Menu—Press the Five-way joystick to select the item displayed in
the bottom center [middle selection area] of the display screen. In the
standby mode, press the joystick to open the Menu.
About your phone
16
[6] Right selection key—The Right selection key in the standby mode
opens either the Names menu [default], a service provider’s home page,
or a user-specified function. For more information, see ”Personal
shortcuts” on page 62.
■Antenna
Your device has an internal antenna. Hold the device as shown with the
antenna area pointing up.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with
the antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact with
the antenna area when operating the device
optimizes the antenna performance and the
battery life.
■Phone basics
Your device can be used with the keyboard open or closed.
To open the keyboard, do the following:
About your phone
17
1. Hold the device with both hands, and open the keyboard as
shown.
2. Extend the keyboard until you hear it click into place.
About your phone
18
3. Turn the device to a horizontal position and hold it as shown.
About your phone
19
■Key functions [keyboard closed]
Power key [1] switches the
device on and off. When the
keypad is locked, it turns the
device display lights on for
about 15 seconds.
Selection key [2] has no
function when the keyboard
is closed.
Left selection key [3] and
Right selection key [3]
provide a variety of functions
depending on the display text
above the keys.
Five-way joystick [4] moves
in four directions and selects
the active menu option when
pressed. For details, see ”The
five-way joystick” on page
21.
Call key [5] dials a device
number and answers a call. In the standby mode it accesses the list of
most recently called numbers.
End key [6] ends an active call or exits from the current function.
Keypad [7] enters numbers and characters.
Note: Some devices may not display the mobile Internet symbol
on the 0 key.
About your phone
20
■Key functions [keyboard open]
When the keyboard is opened, the display graphics rotate 90 degrees
and the Left and Right selection keys change positions. The guiding text
near the Left and Right selection keys does not change.
Keyboard light key [1] switches the keyboard light on or off.
Power key [2] switches the device on and off.
Five-way joystick [3] moves in four
directions and selects the displayed
menu option when pressed.
Backspace key [4] deletes characters.
Character key [5] opens a set of
characters and symbols during text
writing.
Shift keys [6] enters upper case letters and symbols. You can press the
Shift key first, then the desired key; or press both keys at the same time.
Space bar keys [7] enters a space.
Call key [8] dials a device number and answers a call. In the standby
mode it accesses the list of most recently called numbers.
Left selection key [9] and Right selection key [9] selects the menu
option shown by the text displayed above the key.
End key [10] ends an active call or exits from a function.
About your phone
21
Enter key [11] starts a new line when writing text.
■The five-way joystick
The Five-way joystick provides a variety of functions:
• Allows you to scroll through lists
• Moves the cursor up, down, right and left when writing text, using
the calendar, and in some game applications
• Selects the active menu item when pressed briefly [or confirms a
selection]
• Adjusts the volume when moved to the left [to decrease volume] or
to the right [to increase volume] during a call
• Activates the camera when moved up in the standby mode
• Opens the text editing screen to write a text message when moved to
the left in the standby mode
• Opens the calendar when moved to the right in the standby mode
• Opens the contacts list when moved down in the standby mode
■Indicators and icons
The following icons may be displayed in the standby mode:
–You have one or more text or picture messages. See ”Text
messages [SMS] [network service]” on page 33.
–The device has logged a missed call. See ”Call register” on page
51.
or – Your device is connected to the instant messaging service,
and the availability status is online or offline, respectively. See ”Instant
messages (Chat)” on page 46.
– You have received one or several instant messages, and you are
connected to the instant messages service. See ”Instant messages
(Chat)” on page 46.
– You have one or more multimedia messages. See ”Text messages
[SMS] [network service]” on page 33.
About your phone
22
– You have one or more voice messages. See”Voice messages” on
page 42.
– Your device keypad is locked. See ”Lock the keypad [keyguard]” on
page 27.
– Your device is set to the Silent profile. See ”Profiles” on page 61.
– The alarm clock is set to On. See ”Alarm clock” on page 71.
– The GPRS connection mode Always online is selected and the GPRS
services is available.
– You have an incoming or outgoing call during a GPRS dialup
connection. GPRS is suspended.
– There is an active GPRS connection.
– Divert all voice calls. All calls are diverted to another number. If
you have two phone lines, the indicator for line 1 is and for line
2.
– If you have two phone lines, this indicates that you are on the
second phone line. See ”Call settings” on page 64.
– Calls are limited to a closed group. See ”Security settings” on page
66.
– The timed profile is selected. See ”Profiles” on page 61.
– Integrated handsfree is active. See ”Loudspeaker” on page 24.
, , or – A headset, handsfree, or Nokia Loopset enhancement
is connected to the device.
– Bluetooth connection indicator. See ”Set up a Bluetooth
connection” on page 91.
Basic operations
23
4. Basic operations
■Turn the device on or off
1. To turn your device on or off, press and hold the
power key as shown.
If the device displays Insert SIM card or SIM card
not supported, even though the SIM card is
properly inserted, contact your service provider.
2. If the device asks for a PIN code, enter the PIN
code [displayed as ****], and select OK.
3. If the device asks for a security code, enter the security code, and
select OK.
See ”Access codes” on page 28 for more information.
■Set the time
Select Menu > Settings >Time and date settings > Clock >Set the time.
Enter the time [in hh:mm format], and select OK >am or pm.
■Make and answer calls
Use the keypad—Enter the phone number [including the area code], and
press Call. To delete a character to the left of the cursor, select Clear. To
end the call or to cancel the call attempt, press End.
Use contacts—At the start screen, move the Five-way joystick
downward to view your contacts, scroll to the entry you want to call,
and press Call to make the call.
Redial the last number—At the start screen, press Call twice.
Make an international call—Press* twice to enter the international
prefix [a plus [+] sign] in place of the international access code. Then
enter the country code, the area code without a leading zero [if
necessary], and the phone number.
Basic operations
24
Answer or reject a call—Press Call to answer the call, or press End to
reject the call. If Divert if busy is activated to your voice mailbox, the call
is diverted to your voice mail. If not, the call is rejected.
If you select Silence, only the ringing tone is muted. You can then either
answer or reject the incoming call.
Answer a call with the keypad locked—See ”Lock the keypad
[keyguard]” on page 27.
Speed dials—See ”Speed dials” on page 59.
Call waiting—See ”Call settings” on page 64.
■Adjust the earpiece volume
To increase the volume of a call, move the Five-way joystick to the
right. To decrease the volume of a call, move the Five-way joystick to
the left.
When adjusting the volume, a bar chart appears in the display indicating
the volume level. See volume control information in ”Call settings” on
page 64.
You can only adjust the earpiece volume during an active call.
■Loudspeaker
Warning: Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely
loud.
You can use your device as a loudspeaker during a call.
To activate the loudspeaker during a call, select Loudspeaker.
To deactivate the loudspeaker during a call, select Normal.
Phone menu
25
5. Phone menu
Device features are accessed through the main menu of your device. Use
the menus and submenus to select or view items and personalise device
features.
Note: Some service providers order the devices specially
programmed for their network. Some features may not be shown
on the menu.
In the standby mode, press the joystick to select Menu. The first menu
item is displayed.
You can view the menu as a list or as a grid:
List view—List view is the default view for the
main menu. Scroll up and down to view main
menu selections one at a time.
Grid view—To switch between List and Grid view,
see ”Display settings” on page 63. In Grid view,
scroll up, down, right, and left to navigate
through the main menu icons.
In the Grid view, the icon for the selected menu
is outlined, and the name of the menu appears
at the top of the display.
As you scroll through the menus, the menu
number appears in the upper right corner of the
display. Below the menu number is a scroll bar
with a tab.
The tab moves up or down as you scroll through
the menus, providing a visual representation of your current position in
the menu structure.
Open a menu item—Scroll to it, and select it.
Open a submenu—If the menu contains submenus, use the scroll keys to
highlight the desired menu; then select it.
Phone menu
26
Return to the previous menu—Select Back to return to the previous
menu or submenu.
Return to the start screen—Press End from any menu screen.
Phone security
27
6. Phone security
■Lock the keypad [keyguard]
You can lock the keypad to prevent accidental key presses. To answer a
call with keyguard on, press Call. During the call, all features function as
normal. When you end or reject a call, the keypad automatically relocks.
• To lock the keypad, select Menu > #.
• To unlock the keypad, select Unlock > #.
When the keypad is locked, calls still may be possible to the official
emergency number programmed into your device. Enter the emergency
number, and press Call.
■Automatic keyguard
You can set your device to lock the keys automatically after a time you
specify.
See ”Phone settings” on page 64 to activate this feature.
■The security keyguard
The security keyguard locks the keypad of the device with a security
code. The keypad lock remains active, if you open the flip. Select Menu >
Settings > Phone settings > Security keyguard.
Enter the security code. To set the security keyguard, select On.
To activate the security keyguard when the device is closed, select Menu
> # within 1.5 seconds.
To deactivate the keyguard when the flip is open, select Unlock > OK,
and enter the security code. If the device is closed, select Unlock > #
within 1.5 seconds, and enter the security code.If you receive a
Bluetooth connection request from another device while the security
keyguard is activated, you have to deactivate the keyguard before you
can accept the connection.
Phone security
28
When the device is locked, calls still may be possible to the official
emergency number programmed into your device. Enter the emergency
number, and press Call.
■Access codes
The following access codes allow you to secure your device from
unauthorised use. To change access codes, see ”Security settings” on
page 66. Keep the new codes secret and in a safe place, separate from
your device.
Security code—This code, supplied with the device, protects your device
against unauthorised use. The preset code is 12345.
PIN code—This code, supplied with the SIM card, protects the card
against unauthorised use. Turn the PIN code request on so that the code
is requested each time the device is switched on. If you enter an
incorrect PIN code three times in succession, the SIM card is blocked.
You must enter the PUK code to unblock the SIM card and set a new PIN
code.
PIN2 code—This code is supplied with some SIM cards and is required to
access certain services, such as charging unit counters. If you enter an
incorrect PIN2 code three times in succession, PIN2 code blocked
appears in the display, and you are asked for the PUK2 code.
PUK code and PUK2 code—These unblocking codes may be supplied with
the SIM card. For more information, contact your service provider.
Barring password:—This password is needed with Call barring service.
You can obtain the password from your service provider.
Writing text
29
7. Writing text
You can enter text and numbers with the keypad open or closed.
■Write with the keyboard open
When the keyboard is open, you can start to write a message in several
ways.
• Select Menu > Messages > Text messages > Create message.
• Move the joystick to the left in standby mode.
• Press any of the letter keys in the standby mode to open Notes.
Available functions
The following functions are available when writing text with the
keyboard open:
• To insert a number, press a number key. [If you press a number key in
the standby mode, it initiates a normal call procedure.]
• To switch between the lower and upper case, indicated by ,
, or on the top left of the display, or to insert symbols, press
the Shift keys on the keyboard. You can either press a Shift key and
the desired character consecutively; or press and hold a Shift key
and the desired letter at the same time.
• To write in upper case only, press one of the Shift keys twice.
• To delete characters from the display, press the Backspace key, or
select Clear. Press the Backspace key briefly to clear one character at
a time. Use a longer keypress to delete characters more quickly.
• To add a space, press one of the Space keys at the bottom of the
keyboard.
• To create a line break, press the Enter key.
Writing text
30
Typing accented characters
The characters available depend on the language selected in the Phone
language menu. To type accented characters or symbols that are not
printed on the keyboard, do one of the following:
• To access a set of punctuation marks, accented characters, and
symbols, press the Character key. Scroll through the character set
with the joystick, and select Use to enter the selected character.
• To type an accented character that is not included in the list of
special characters under the Character key, press and hold the
Character key, and simultaneously press A repeatedly until the
desired accented variant of A appears on the display.
■Write with the keyboard closed
You can use two methods for entering text and numbers with the
keyboard closed:
•Standard mode [ ] is the only way to enter names into Names
and to rename caller groups.
•Predictive text input [ ] is a quick and easy method for writing
messages.
Press the #key to switch predictive text on or off and to use predictive
text in various modes.
■Standard mode
Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted,
and your device awaits the next entry.
Select Clear to backspace the cursor and delete a character.
Select and hold Clear to backspace continuously and delete characters.
Press 0 to enter a space and accept a completed word.
Press 1 to enter a period [.].
Press* to display special characters. See ”Enter punctuation and special
characters” on page 32.
Writing text
31
Press and hold the #key to switch between text and numeric entry. The
icon is displayed at the top of the screen when the device is in
numeric entry mode.
Depending on which capitalization mode you have selected, one of the
icons , , or is displayed when the device is in text entry
mode.
■Predictive text
Predictive text input allows you to write messages quickly using your
keypad
and the built-in device dictionary. It is much faster than using the
standard
mode multi-tap method. You can use predictive text to write a message
and create a calendar note.
To activate predictive text at any text entry screen, select Options >
Dictionary. Select a language.
How to use predictive text
• For each letter of the word that you want to spell, press the
corresponding key on your keypad only once, even if the letter you
want is not the first letter on the key. The device guesses the word
you are trying to spell.
• If a displayed word is not correct, press* to see other matches.
To move forward through a list of matches, press * repeatedly.
To return to the previous word in the list of matches, select Prev..
•Press 0 to accept the word, enter a space, and begin writing the
next word.
•If? appears after a word, select Spell to add the word to the
dictionary.
See ”Add new words to the dictionary” on page 32.
•Press 1 to insert a period into your message.
• Press and hold the * to display special characters. See ”Enter
punctuation and special characters” on page 32.
Writing text
32
Compound words
Enter the first part of the word and confirm it, by moving the joystick to
the right.
Enter the last part of the word and confirm it, by moving the joystick to
the right.
Add new words to the dictionary
If you encounter a word that predictive text does not recognize, a
question mark [?] follows the word and Spell appears in the lower left of
the display.
Select Spell, enter your new word using the keypad, and select Save. The
word is added to the dictionary and to the message that you are writing.
Keep these factors in mind when adding words:
• New words that you accept by selecting Save, the 0 key, or deleting
the space between two words are saved to the dictionary.
• Depending on the language and the length of the words, you may be
able to add hundreds of words to the dictionary.
• When the dictionary is full, the most recent addition replaces the
first.
■Enter punctuation and special characters
While at any text entry screen, press the * key to display special
characters [press and hold the * key if predictive text is on].
Press the * key twice to display the Graphical smileys menu.
Scroll through the list of special characters by using the Five-way
joystick. Once a character is highlighted, press the Five-way joystick to
insert the character into your message.
Messages
33
8. Messages
The message services can only be used if they are
supported by your network or your service provider.
To select the font size for reading and writing messages,
select Menu >Messages> Message settings >Other settings> Font size.
Note: When sending messages, your device may display Message
sent. This is an indication that the message has been sent by your
device to the message centre number programmed into your
device. This is not an indication that the message has been
received at the intended destination. For more details about
messaging services, check with your service provider.
■Text messages [SMS] [network service]
Using the SMS [short message service], your device can send and receive
multipart messages, which consist of several ordinary text messages.
Invoicing may be based on the number of ordinary messages that are
required for a multipart message.
Before you can send a message, you need to save some message
settings. See ”Settings for text and e-mail messages” on page 43.
You can also send and receive text messages that contain pictures. A
picture message can be a multipart message.
Note: Picture message function can only be used if it is
supported by your network operator or service provider. Only
devices that offer picture message features can receive and
display picture messages.
Write and send messages
Your device can send text messages beyond the normal 160-character
limit. If your message exceeds 160 characters, it is sent as a series of two
or more messages. The number of available characters and the current
part number of a multipart message are shown on the top right of the
Messages
34
display, [for example 120/2]. Using special [Unicode] characters such as
ë, â, á, ì takes up more space.
1. Select Menu > Messages > Text messages > Create message.
2. Enter a message. See”Writing text” on page 29. To insert text
templates or a picture into the message, see ”Templates” on page 35.
3. Select Send, or press Call to send the message.
The messages that you send are saved in the Sent items folder if the
setting Save sent messages is set to Yes. See ”Settings for text and
e-mail messages” on page 43. Text messages are indicated with
.
4. Enter the recipient’s phone number, or search for the phone number
in Names.
5. Select OK to send the message.
Options for sending a message
After you have write a message, select Options > Sending options and
one of the following:
Send to many—Send the message to several recipients.
Send to list—Send the message to members of a distribution list.
Sending profile—Use a predefined message profile to send the message.
To define a message profile, see ”Settings for text and e-mail messages”
on page 43.
Read and reply to message or e-mail
When you receive a message or an SMS e-mail, the indicator and
the number of new messages followed by Messages received is shown. A
blinking indicates that the message memory is full. Before you can
receive new messages, delete some of your old messages in the Inbox
folder. If more than one message is received, select the one that you
want to read. An unread text message or SMS e-mail is indicated by
.
1. Select Show to view the new message or select Exit to view it later.
Messages
35
When you select Options while reading a message, some of the
following options may be available: Delete, Forward, or Edit the
message as a text message or an SMS e-mail; Rename the message
you are reading or move it to another folder; Copy to calendar to
copy text at the beginning of the message to your device calendar as
a reminder note for the current day; Message details to view, if
available, the sender’s name and phone number, the message centre
used, and the date and time of receipt; Use detail to extract numbers,
e-mail addresses, and Web site addresses from the current message.
When reading a picture message, select Save picture to save the
picture in the Templates folder.
2. Select Reply and select the message type to reply to a message.
When replying to an SMS e-mail, confirm or edit the e-mail address
and subject before you create your reply message.
3. To send the reply message to the displayed number or e-mail address,
select Send > OK.
Inbox and sent items folders
The device saves incoming text and multimedia messages in the Inbox
folder. Sent text messages are saved in the Sent items folder.
Templates
Your device includes text templates, indicated by , and picture
templates, indicated by . To access the template list, select Menu >
Messages > Text messages > Templates.
Saved text messages folder and My folders
To organize your messages, you can move some of them to the Saved
text msgs. folder or add new folders for your messages. While reading a
message, select Options >Move, scroll to the new folder, and press
Select.
To add or delete a folder, select Menu > Messages > Text messages> My
folders.
Messages
36
To add a folder if you have not saved any folder, select Add.
To add a folder if you have already added and saved a folder, select
Options > Add folder.
To delete a folder, scroll to the folder that you want to delete, and select
Options > Delete folder.
To rename a folder, scroll to the folder that you want to rename, and
select Options > Rename folder.
Distribution lists
Create, edit, and save personal distribution lists which include multiple
recipients. The device sends the message separately to each recipient on
the list, so sending a message using a distribution list may cost more
than sending a message to one recipient.
Each contact you wish to add to a distribution list must already exist in
your phonebook.
1. Select Menu > Messages > Text messages> Distribution lists.
2. To create the first distribution list, select Add. To create a
distribution list if you have already added and saved a distribution
list, select Options > Add list.
3. Enter a name for the list and select OK.
4. To add names to the list, select the list and select View > Add to open
Names. Select the desired contact.
Message counter
Message counter shows the number of sent and received text messages,
and the details of each message. Selecting Clear counters allows you to
clear the counter for sent and received messages.
To view message details select Menu > Messages > Text messages>
Message counter > Sent messages or Received messages.
To clear the message counters, select Menu > Messages > Text
messages> Message counter > Clear counters.
Messages
37
■Multimedia messages [MMS] [network service]
Note: Only devices that offer compatible multimedia message
features can receive and display multimedia messages. Exercise
caution when opening messages. Messages may contain viruses
or otherwise be harmful to your device or PC.
A multimedia message can contain text, sound, and a picture or a video
clip. The device supports multimedia messages that are up to 100 KB in
size. If the message contains a picture, the device scales it down to fit
the display area.
The default setting to receive multimedia messages [Allow multimedia
reception] is generally set to Yes or In home network. See ”Settings for
multimedia messages” on page 43.
Multimedia messaging supports the following formats:
• Picture: JPEG, GIF, WBMP, BMP, and PNG.
• Sound: Scalable Polyphonic MIDI [SP-MIDI], AMR audio, and
monophonic ringing tones.
• Video clips in 3GP format with SubQCIF and QCIF resolution and
AMR audio.
• Themes for the background display on the device screen.
The device does not necessarily support all variations of these file
formats. If a received message contains any unsupported elements, they
may be replaced with the file name and the text Object format not
supported.
You are not able to receive any multimedia messages if you have a call
in progress or a game or another Java application running.
Write and send a multimedia message
To modify multimedia messaging settings, see ”Settings for multimedia
messages” on page 43. To check availability and subscribe to the
multimedia messaging service, contact your service provider.
Copyright protections may prevent some images, ringing tones, and
other content from being copied, modified, transferred, or forwarded.
Messages
38
1. Select Menu >Messages > Multimedia msgs. > Create message.
2. Enter a message. See ”Writing text” on page 29.
• To insert a file in the message, select Options > Insert and select
the desired option from the gallery, or select Calendar note or
Business card.
To move the text component to the top or bottom of the message,
select Options > Place text first or Place text last.
• Your device supports the sending and receiving of multimedia
messages that contain several pages [slides]. To insert a slide in
the message, select Options > Insert >Slide. Each slide can
contain text, one image, and one sound clip.
If the message contains several slides, to open the desired one,
select Options >Previous slide, Next slide, or Slide list. To set the
interval between the slides, select Slide timing.
• The following options may also be available: Delete [to delete an
image, slide, or sound clip from the message], Preview, or Save
message. In More options the following options may be available:
Insert contact, Insert number, Message details, and Edit subject.
3. To send the message, select Send or Options > Send to e-mail or Send
to many.
4. Enter the recipient’s phone number or e-mail address, or select
Search to view contacts saved in Names.
While the multimedia message is being sent, is displayed, and
you can use other functions on the device. If there is an interruption
while the message is being sent, the device tries to resend it a few
times. If this fails, the message will remain in the Outbox folder, and
you can resend it later.
The messages that you send are saved in the Sent items folder if the
setting Save sent messages is set to Yes. Multimedia messages are
indicated with .
For more information, see ”Settings for multimedia messages” on
page 43.
Messages
39
Read and reply to a multimedia message
When your device receives a multimedia message, the indicator and
the text Multimedia message received are displayed. The appearance of
a multimedia message may vary depending on the receiving device.
1. Select Show to view the message or select Exit to view it later.
If more than one message is received, select the one that you want to
read. An unread multimedia message is indicated by .
2. Scroll to view the message.
See the options in ”Gallery” on page 68.
Delete multimedia messages
To delete multimedia messages, select Menu > Messages > Multimedia
msgs. > Delete messages. Select the folder from which you want to
delete the messages and select OK to confirm.
Multimedia folders
The device saves the received multimedia messages in the Inbox folder.
Multimedia messages that have not yet been sent are moved to the
Outbox folder. The multimedia messages that you wish to send later can
be saved in the Saved items folder.
The multimedia messages that have been sent are saved in the Sent
items folder of the Multimedia msgs. submenu if the setting Save sent
messages is set to Yes. For more information, see ”Settings for
multimedia messages” on page 43.
Messages memory full
When you have a new multimedia message waiting and the memory for
the messages is full, blinks, and Multimedia message memory full,
view waiting message? is shown. To view the waiting message, select
Show.
To save the message, select Options >Save message.
Messages
40
To delete old messages, first select the folder, then the old message to
be deleted. To discard the waiting message, select Exit >Yes; if you
select No, you can view the message.
■E-mail [network service]
You can write, send, and read e-mail with your device. Your device
supports POP3 and IMAP4 e-mail servers. Before you can send and
retrieve e-mail, you may need to do the following:
• Obtain an e-mail account or use your current one. Contact your
service provider to confirm compatibility of e-mail providers.
• Contact your e-mail service provider to obtain the required e-mail
settings.
• Set the e-mail settings on your device. Select Menu >Messages >
Message settings > E-mail messages. See ”Settings for e-mail
application” on page 44.
Write and send an e-mail
1. Select Menu > Messages > E-mail >Create SMS e-mail.
2. Enter the recipient’s e-mail address, a subject, and the e-mail
message.
3. Select Send.
Note: When sending e-mail, your device may display the words
E-mail message sent. This is an indication that the e-mail has
been sent by your device to the e-mail server. This is not an
indication that the e-mail has been received at the intended
destination. For more details about e-mail services, check with
your service provider.
Download e-mail messages
1. To download e-mail that has been sent to your e-mail account,
select Menu> Messages > E-mail > Retrieve.
Messages
41
To download new e-mail and send e-mail that has been saved in the
Outbox folder, select Menu> Messages > E-mail. Select Options>
Retrieve e-mails.
The device connects to the e-mail service and downloads the
messages to the Inbox folder.
2. Press Select to read the new message immediately or Back to read it
later.
Read the message later
From the menus, select Messages > E-mail > Inbox and the message you
want to read. An unread e-mail message is indicated by .
Reply to an e-mail message
Warning: Exercise caution when opening messages. Messages
may contain malicious software or otherwise be harmful to
your device or PC.
1. While viewing a message, select Reply or Options > Reply to all.
2. Select Original text to include the original text in your reply or Empty
screen to reply without the original text.
3. Confirm or edit the e-mail address, and write your reply.
4. Select Send to send the message.
E-mail folders
Your device saves e-mail that you have downloaded from your e-mail
account in the Inbox folder. Other folder contains Drafts for saving
unfinished e-mail, Archive for organizing and saving your e-mail,
Outbox for saving e-mail that has not been sent, and Sent items for
saving e-mail that has been sent.
Delete e-mail
To delete e-mail, select Menu > Messages > E-mail > Options > Delete
messages. To delete all messages from a folder, select the folder
Messages
42
containing the messages and Yes. To delete all messages from all folders,
select All messages > Yes. Deleting an e-mail from your device does not
delete it from the e-mail server.
■Voice messages
You can define a phone number of a voice mailbox and a DTMF tone
sequence that you want to use with the mailbox [network service]. For
more information and for the voice mailbox number, contact your
service provider.
Select Menu > Messages >Voice messages and one of the following:
Listen to voice messages —Call your voice mailbox.
Voice mailbox number—Enter, search for, or edit your voice mailbox
number.
If supported by the network, indicates new voice messages. Select
Listen to call your voice mailbox number.
Press and hold 1 to call your active voice mailbox if you have the
number set.
■Info messages
With the info message network service you may be able to receive
messages on various topics. For details, contact your service provider.
■Service commands
Select Menu > Messages >Service commands. Enter and send service
requests [also known as USSD commands], such as activation
commands for network services, to your service provider.
■Delete all messages from a folder
To delete all messages from a folder, select Menu > Messages. Select the
message type, and select Delete messages. Select the folder from which
you want to delete the messages and select OK to confirm.
Messages
43
If the folder contains unread messages, the device will ask whether you
want to delete them.
■Message settings
The message settings affect the sending, receiving, and viewing of
messages.
Settings for text and e-mail messages
1. Select Menu > Messages >Message settings > Text messages >
Sending profile.
2. Select the message profile that you want to change, and update the
following settings as you choose: Message centre number [delivered
by your service provider], Messages sent via, Message validity,
Default recipient number [text messages] or E-mail server [e-mail],
Delivery reports, Use GPRS, Reply via same centre [network service],
and Rename sending profile.
3. Select Back.
4. Select Save sent messages >Yes to set the device to save sent
messages in the Sent items folder. If you select No, the sent
messages are not saved.
Settings for multimedia messages
Select Menu > Messages >Message settings > Multimedia msgs., and
one of the following:
Save sent messages—Select Yes to set the device to save sent
multimedia messages in the Sent items folder. If you select No, the sent
messages are not saved.
Delivery reports—Select Yes for the network to send delivery reports
about your messages [network service].
Scale image down—Select Yes to change the image size when you insert
an image into a multimedia message.
Default slide timing—Set the default time for slides in multimedia
messages.
Messages
44
Allow multimedia reception—Choose No, Yes, or In home network to use
the multimedia service. If Allow multimedia reception is set to Yes or In
home network, your operator or service provider may charge you for
every message you receive. The default setting to receive multimedia
messages is generally on.
Incoming multi- media messages—Select Retrieve to set the device to
automatically get newly received multimedia messages, or select Reject
if you do not wish to receive multimedia messages. This setting is not
shown if Allow multimedia reception is set to No.
Configuration settings—Select Configurations and select the default
service provider for retrieving multimedia messages. Select Account to
see the accounts provided by the service provider. If more than one
account is displayed choose the one that you want to use. You may
receive the settings as a configuration message from the service
provider. To key in the settings manually see ”Configuration settings” on
page 66.
Allow adverts—Select whether you want to allow your device to receive
advertisement messages. This setting is not shown if Allow multimedia
reception is set to No.
Settings for e-mail application
You may receive the e-mail application settings as a configuration
message from the service provider. To enter the settings manually see
”Configuration settings” on page 66.
Select each of the settings individually, and enter all the required
settings. Contact your e-mail service provider for the settings.
Select Menu >Messages >Message settings > E-mail messages and one
of the following:
Configuration—Select the set that you would like to activate.
Account—View the accounts provided by the service provider. If more
than one account is displayed, choose the one that you want to use.
My name— Enter your name or nickname.
E-mail address—Enter your e-mail address.
Messages
45
Include signature—Define a signature that is automatically added to the
end of your e-mail when you write a message.
Reply-to address—Enter the e-mail address to which you want the
replies to be sent.
SMTP user name—Enter the name you want to use for outgoing e-mail.
SMTP password—Enter the password you want to use for outgoing
e-mail.
Display terminal window—Select Yes to perform manual user
authentication for Intranet connections.
Incoming server type—Select either POP3 or IMAP4 depending on the
type of e-mail system that you are using. If both types are supported,
select IMAP4.
Incoming mail settings—If you selected POP3 as the incoming server
type, the following options are shown: Retrieve e-mails, POP3 user
name, POP3 password, and Display terminal window.
If you selected IMAP4 as the incoming server type, the following options
are shown: Retrieve e-mails, Retrieval method, IMAP4 user name:,
IMAP4 password, and Display terminal window.
Other settings
Select Menu > Messages > Message settings > Other settings > Font
size to set the font size for reading and writing messages.
Instant messages (Chat)
46
9. Instant messages (Chat)
Instant messaging (Chat) is a way of sending short, simple text
messages that are delivered over TCP/IP protocols to online users
(network service). Your contact list shows you when the contacts on the
list are online and available to participate in an instant messages
conversation.
Before you can use instant messaging, you need to subscribe to the
service. For availability, charging and subscription to the service,
contact your service provider, from whom you also receive your unique
ID and password and the settings for instant messaging. For setting the
required settings for the instant messaging service, see ”Instant
messaging settings” on page 50. The icons and texts on the display may
vary depending on the instant messaging service.
You can use the other functions of the phone while you have an active
instant messaging session in the background.
Instant messaging uses shared memory, see ”Shared memory” on page 8.
■Entering the instant messaging menu
To enter the Instant messages menu while still offline, select Menu, and
select Messages and Instant messages. Activate a service and then
select Login to connect to the service, Saved convers. to view, erase or
rename the conversations that you have saved during a session, or
Connect. settings to access the settings needed for a connection.
■Connecting to and disconnect from the instant
messaging service
To connect to the service, enter the Instant messages menu, activate a
service and select Login. Select one of the available sets. If necessary key
in the User ID: and the Password:. When the phone has successfully
connected, Logged in is displayed.
Instant messages (Chat)
47
Note: To set the phone to automatically connect to the instant
messaging service when you enter the Instant messages menu,
connect to the service, select My settings, Automatic login and
On IM start-up.
To disconnect from the service, select Logout.
■Starting an instant messaging conversation
Enter the Instant messages menu and connect to a service. You can
select
•Conversations to view the list of new and read messages or
invitations to instant messaging during the active session. Scroll to
the message or invitation that you want and select Open to read the
message.
indicates the new and the read instant messages.
indicates the new and the read group messages.
indicates the invitations.
•IM contacts includes the contacts that you have added. Scroll to the
contact to whom you would like to send instant messages and select
Chat or select Open if a new message is shown in the list.
If you have received a new message from a contact, it is indicated
with .
indicates the online and indicates the offline contacts in the
phone’s contacts memory. indicates a blocked contact. For more
information, see ”Blocking and unblocking messages” on page 49.
•Groups and Public groups. The list of bookmarks to public groups
provided by the service provider is displayed. To start a conversation,
scroll to a group and select Join. Enter the screen name that you
want to use in the conversation. When you have successfully joined
in the group conversation, the phone shows Joined group: and the
group name. To create a private group, see ”Groups” on page 49.
•Search and select Users or Groups to search for other users or public
groups on the network. To start the session when you have found the
Instant messages (Chat)
48
user or the group that you want, select Options and select Chat or
Join group.
• To start a session from Contacts, see ”View subscribed names” on
page 57.
■Accepting or rejecting an invitation
When you have connected to the service and you receive a new
invitation, New invitation received is displayed. Select Read to read it. If
more than one invitation is received, the number of messages followed
by new invitations received is displayed. Select Read, scroll to an
invitation that you want and select Open. Select Accept, to join the
private group conversation, or select Options and select Reject or Delete
to reject or delete the invitation.
■Reading an instant message
When you have connected to the service and you receive a message
from a person who is not taking part in the conversation, New instant
message is displayed. Select Read to read it. If more than one message is
received, the number of messages followed by new instant messages is
displayed. Select Read, scroll to a message and select Open.
New messages received during an active session are held in the
Conversations of the Instant messages menu. If the message is from a
person whose contact information is missing from the contact list in IM
contacts, the sender’s ID is shown. If the contact information can be
found in the phone’s memory for contacts and the phone recognises it,
the sender’s name is shown. To save a new contact in the phone’s
memory, select Options and select Save to contacts or and enter the
name of the person, or Add to contact.
■Participating in a conversation
Join or start a session by selecting Write. Write your message and select
Send or press the Call key to send it. If you select Options, some of the
following options are available: View conversation, Save to contacts,
Add to contact, Group members, End conversation, Dictionary.
Instant messages (Chat)
49
■Editing your own settings
Enter the Instant messages menu and connect to the service. Select My
settings to view and edit your own availability information or screen
name. Select Availability and Available for all or Avail. for contacts (or
Appear offline) to allow all the other users or only the contacts on your
contact list to see that you are online when you have connected to the
service. When you are connected to the service, indicates that you
are online and that you are not visible to others.
■Contacts for instant messaging
To add contacts to the instant messaging contacts list, connect to the
service and select IM contacts. If the contacts list is empty the phone
displays Contact list empty. Copy contacts from server? to retrieve
available contacts from the server. Otherwise select Options and select
Add contact, or if you have no contacts added, select Add. Select Enter
ID manually, Search from serv., From contacts, or Copy from server to
add a new contact. When the contact is added, the phone displays
Added to IM contacts: and the contact name.
Scroll to a contact, and select Chat to start a session or select Options
and select Contact info, Edit name, Block contact (or Unblock contact),
Add contact, Remove contact, Copy to server, or Availability alerts.
■Blocking and unblocking messages
Connect to the service and select Conversations or IM contacts.
Highlight the contact in the contacts list from whom you want to block
incoming messages. Select Options, select Block contact and select OK.
To unblock the messages, connect to the service and select Blocked list.
Scroll to the contact from whom you want to unblock the messages and
select Unblock.
■Groups
You can create your own private groups for a session, or use the public
groups provided by the service provider. The private groups exist only
during an active session. You can add to a private group only the
Instant messages (Chat)
50
contacts that are in your contact list and thus in the phone’s contacts
memory. If the server you are logged onto does not support group
services all groups related menus are dimmed.
Public groups
You can bookmark public groups that your service provider may
maintain. Connect to the service, select Groups and Public groups. Scroll
to a group that you want to chat with and select Join. If you are not in
the group, key in your screen name as your nickname for the group. If
you select Options, you can select Delete group to delete a group from
your group list.
Creating a private group
Connect to the service, select Groups and Create group. Key in the name
for the group and the screen name that you want to use for the group.
You can use another screen name in another group. Mark your private
group members from the contacts list and key in an invitation to newly
added members.
■Instant messaging settings
You may receive the settings as a configuration message from the
service provider. To receive the settings as a configuration message, or
to key in the settings manually, see ”Configuration settings” on page 66.
For the instant messaging and presence settings, contact your service
provider.
To enter the Instant messages menu while still offline, select Menu >
Messages > Instant messages. Activate a service and select Connect.
settings. Select Configuration and select the set you would like to
activate. Select Account and choose the account you want to use. Select
User ID to view or to edit the user ID. Select Password to enter the
password.
Call register
51
10. Call register
The device registers the phone numbers of missed,
received, and dialled calls, and the approximate length
of your calls. To register this information, the device
must be switched on and within the network’s service
area, and the network must support these functions.
To view recent call registers, select Menu >Call register >Missed calls,
Received calls, or Dialled numbers.
When viewing a list, select Options to view the date and the time of the
call, edit or delete the phone number from the list, save the number in
Names, or send a message to the number.
■Delete log contents
To delete recent call lists, select Menu >Call register > Delete recent call
lists >All, Missed, Received, or Dialled.
■Counters and timers
Note: The actual invoice for calls and services from your service
provider may vary, depending upon network features, rounding
off for billing, taxes, and so forth.
Select Menu > Call register > Call duration, GPRS data counter, or GPRS
connection timer for approximate information on your recent
communications.
Names
52
11. Names
You can save names and phone numbers [contacts] in the
device memory and in the SIM card memory.
• The device memory may save names with numbers
and text notes about each name. You can also save an
image for a certain number of names.
• Names and numbers saved in the SIM card memory, are indicated by
.
If you subscribe to the presence service, you can set up your contacts list
to publish your current availability status [network service]. Your status
information is communicated to anyone who has access to the presence
service and who is requesting this information. See ”My presence” on
page 54 and ”Subscribed names” on page 57.
■Contact settings
Select Menu > Contacts > Settings > Memory in use, Contacts view, or
Memory status.
■Add contact
Select Menu >Contacts >Add new contact. Enter the name and the
phone number. When the name and number are saved, select Done.
■Add numbers, text items, or an image
You can save different types of phone numbers, short text items, and an
image per name in the internal device memory for contacts.
The first number saved is automatically set as the default number, and it
is indicated with a frame around the number type indicator, for example
. When you select a name from contacts to make a call, the default
number is used unless you select another number.
1. Make sure that the memory in use is either Phone or Phone and SIM.
See”Contact settings” on page 52.
Names
53
2. Open your contacts list and scroll to the contact you want to modify.
3. Select Details >Options and one of the following:
Add number—Select one of the number types, enter the number, and
select OK to save it. To set the selected number as the default
number, select Set as default.
Add detail—Select one of the text types, enter the text [see”Writing
text” on page 29], and select OK to save it. If you select User ID, select
Search to find an ID by a mobile phone number or an e-mail address
if you are connected to the presence service. See ”My presence” on
page 54. If only one ID is found, it is automatically saved. Otherwise,
to save the ID, select Options > Save. To enter the ID, select Enter ID
manually. Enter the ID, and select OK to save it.
Add image—When you select this option, Gallery is opened
automatically so that you can choose the image. Open the image you
want to add, and select Options> Save to contacts.
4. Select Back > Exit to return to the standby mode.
To change the number or text type, select Change type in the options
list. You cannot change the type of an ID when it is on the IM contacts
or in the Subscribed names list.
■Search for a contact
Select Menu > Contacts > Search, or to find a contact name quickly,
scroll down in the standby mode. You can enter the first characters of
the name you are searching for in the pop-up window.
■Contact options
The following options may also be available in the Contacts menu:
Add new contact and Delete.
Copy—Copy names and phone numbers between the phone contact
directory and the SIM card memory.
Settings—Select how the names and numbers are displayed, and view
the free and used memory capacity. See ”Contact settings” on page 52.
Names
54
Speed dials—Assign a number to a speed dial key. To activate speed dial
see ”Speed dials” on page 59.
Info numbers—Call the information numbers of your service provider if
the numbers are included on your SIM card [network service].
Service numbers—Call the service numbers of your service provider if the
numbers are included on your SIM card [network service].
My numbers—View the phone numbers assigned to your SIM card. Only
shown, if the numbers are included on your SIM card.
Caller groups—Arrange the names and phone numbers saved in the
memory into caller groups with different ringing tones.
My presence—Share your presence status with other users with
compatible devices and access to the service.
Subscribed names—Stay informed of your contacts’ presence status by
creating a list of subscribed contacts.
■Edit or delete details
1. Search for the contact that you want to edit or delete, and select
Details.
2. Scroll to the name, number, text item, or image that you want to edit
or delete, and select Options.
3. Select Edit name, Edit number, Edit detail, Change image, Delete
number, Delete detail, or Delete image.
You cannot edit or delete an ID when it is in IM contacts or in the
Subscribed names list.
Deleting an image attached to the contact does not delete it from
Gallery.
■My presence
With the presence service [network service] you can share your presence
status with other users with compatible devices and access to the
service. Presence status includes your availability, status message, and
personal logo.
Names
55
Other users who have access to the service and who are requesting your
information are able to see your status. The requested information is
shown in Subscribed names in the viewers Names menu. You can
personalise the information that you want to share with others and
control who can see your status.
Before you can use presence, you need to subscribe to the service.
Contact your service provider to check the availability and charging
details, subscribe to the service, and receive your unique ID and
password and the settings for the service.
While connected to the presence service, you can use the other
functions of the device, and the presence service is active in the
background.
Log in and out of the presence service
Select Menu >Contacts >My presence >Connect to 'My presence' service
or Disconnect.
Update your presence status
Select Menu > Contacts > My presence >My current presence, and one
of the following:
View current presence—Select Private pres. or Public presence
My availability—Set your availability status to Available [],
Busy [], or Not available [].
My presence message—Key in the text shown to other persons; or select
Options > Previous msgs., and select an old message as the status
message.
My presence logo—Select your personal logo from the Graphics folder in
the gallery. If you select Default, the logo is not published.
Show to—Assign the groups who can see your presence status, or choose
not to show it at all. Select from the following:
•Private and public—Contacts in your private list are able to see all
your presence information [availability, status message, and logo].
Other contacts can see only your availability.
Names
56
•Private viewers—Contacts in your private list can see all your
presence information [availability, status message, and logo]. Other
users will not see any information.
•No one—No one can see your presence information.
Viewers lists
To see who is allowed to view your presence information, select Menu
>Contacts > My presence >Viewers, and one of the following:
Current viewers—Check all the persons who have subscribed to your
presence information.
Private list—Check the list of persons who are allowed to view all your
presence information, including availability, status message, and logo.
You can manage your own private list. Other persons who are not in the
private list can see only your availability.
Blocked list—View the list of persons you have blocked from viewing
your presence information.
Presence settings
Select Menu > Contacts > My presence > Settings, and one of the
following:
Show current presence in idle—Select On to display the current status
indicator in the standby mode.
Synchronise with profiles—Select On to update My presence message
and My availability manually or automatically by linking them to the
currently active profile. See ”Profiles” on page 61. You cannot link a
personalised status logo to a profile.
Connection type—Select whether the device connects automatically to
the service when the device is switched on.
IM and my presence settings—View and modify your IM and presence
account settings.
Names
57
■Subscribed names
You can stay informed of your contacts’ presence status by creating a
list of subscribed contacts. You can view the contacts’ presence status
unless the contact or network prevents it.
To use this feature, you and the contact[s] you wish to view must
subscribe to the presence service [see”My presence” on page 54]. The
memory in use must be either Phone or Phone and SIM for this feature
to work [see ”Contact settings” on page 52].
To connect to the presence service, select Menu > Contacts > My
presence > Connect to 'My presence' service.
Add contacts to subscribed names
1. Select Menu > Contacts > Subscribed names. If you have not
connected to the presence service, the device asks if you want to
connect now.
2. If you have no contacts on your list, select Add. Otherwise, select
Options > Subscribe new. The list of your contacts is shown.
3. Select a contact from the list, and if the contact has a user ID saved,
the contact is added to the subscribed names list. If there is more
than one ID, select one of them.
After subscription of the contact, Subscription activated is shown.
View subscribed names
You can view the subscribed names either by scrolling through the
contacts or by the Subscribed names menu.
Select Menu > Contacts > Subscribed names. The first contact on the
subscribed names list is displayed and the following status information
is shown:
• Text describing the contact’s availability [if the person chooses to
define it]
• Icons that indicate the contact’s presence status
The icon indicates that the person’s presence information is not
available.
Names
58
Select Details to view the details of the selected contact, or select
Options and one of the following:
Subscribe new—Add a new contact to the list of subscribed names.
Chat—Start a conversation.
Send message—Send a text message to the selected contact.
Send SMS e-mail—Send an e-mail to the selected contact.
Send bus. card—Send a business card to the selected contact.
Unsubscribe—Remove the selected contact from the list of subscribed
names.
Unsubscribe a contact
To unsubscribe a contact from the Contacts list, scroll down in the
standby mode, and scroll to the contact that you want to unsubscribe.
Select Details, select the ID, and select Options. To unsubscribe, select
Unsubscribe >Yes.
To use the Subscribed names menu to unsubscribe, see ”View subscribed
names” on page 57.
■Send and receive a business card
You can send and receive a person’s contact information as a business
card if you are using a compatible device. When you have received a
business card, select Show >Save to save the business card in the device
memory. To discard the business card, select Exit >Yes.
To send a business card:
1. In Contacts, search for the name and phone number that you want to
send.
2. Select Details > Options > Send bus. card.
3. Select Via text message [network service], Via multimedia
[network service], Via infrared, or Via Bluetooth.
4. Select Default number or All details.
Names
59
■Speed dials
To assign a number to a speed dial key:
1. Select Menu >Contacts > Options > Speed dials, and scroll to a key
number.
2. Select Assign, or if a number has already been assigned to the key,
select Options> Change.
3. Select Search, and select first the name and then the number that
you want to assign.
If the Speed dials function is off, the device asks whether you want to
activate it. See also Speed dials in ”Call settings” on page 64.
To use speed dials, hold down the desired speed dial key in the standby
mode.
■Voice dialling
You can make a phone call by saying a voice tag that has been added to
a phone number. Any spoken words, such as a person’s name, can be a
voice tag. You can add up to 10 voice tags.
Important notes about voice tags:
• Voice tags are not language-dependent. They are dependent on the
speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags and
use them in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar
names for different numbers.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice
dialling in all circumstances.
Add and manage voice tags
Save or copy in the device memory the contacts to which you want to
add a voice tag. You can also add voice tags to the names in the SIM
Names
60
card, but if you replace your SIM card with a new one, you first need to
delete the old voice tags before you can add new ones.
1. Scroll down in the standby mode to open your contact list.
2. Scroll to the contact to which you want to add a voice tag, and select
Details.
3. Scroll to the phone number you want, and select Options > Add voice
tag.
4. Select Start, and say clearly the words you want to record as a voice
tag.
After recording, the device plays the recorded tag. appears after
the phone number with a voice tag.
To check the voice tags, select Menu > Contacts >Voice tags. Scroll to
the contact with the voice tag that you want, select the options to listen
to, delete, or change the recorded voice tag.
Make a voice tag call
In the standby mode, press and hold the Right selection key. A short tone
is played, and Speak now is displayed. Say the voice tag clearly. The
device plays the recognized voice tag and dials the voice tag phone
number after 1.5 seconds.
Settings
61
12. Settings
You can adjust different settings in your device, including
settings related to calls, phone, security and more.
■Profiles
Use Profiles to adjust and personalise ringing tones and sound tones for
different events and environments. You can personalise the profiles to
your own liking, and activate a profile to use it. Available profiles are
General, Silent, Meeting, Outdoor, My style 1, and My style 2.
Select Menu > Settings > Profiles. Select a profile, and:
Activate—Activates the selected profile, select.
Personalise—Personalises the profile. Select the setting you want to
change, and modify it as you choose.
Timed—Sets the profile to be active until a certain time up to 24 hours.
Set the time for the profile setting to end. When the time set for the
profile expires, the previous profile that was not timed becomes active.
■Themes
A theme is a package that may include a screen saver, a wallpaper
image, a ringing tone, and a colour scheme to personalise your device
for different events and environments. Themes are stored in Gallery. To
activate a theme do the following:
1. Select Menu > Settings > Themes >Select theme.
The gallery is automatically opened so that you can locate a theme.
2. Open the Themes folder, scroll to a theme, and select Options >Apply
theme.
See ”Gallery” on page 68.
To download new themes, select Menu >Settings >Themes >Theme
downloads. See ”Download” on page 86.
Settings
62
■Tone settings
To change the tone settings for the active profile, select Menu >Settings
> Tone settings. Select and change Incoming call alert, Ringing tone,
Ringing volume, Vibrating alert, Message alert tone, Instant message
alert tone, Keypad tones, and Warning tones. You can find the same
settings in the Profiles menu, see ”Profiles” on page 61.
Select Alert for to set the device to ring only upon calls from phone
numbers that belong to a selected caller group. Scroll to the caller group
you want to select or choose All calls > Mark.
■Personal shortcuts
With personal shortcuts you get quick access to frequently used device
functions.
Right selection key
Select Menu > Settings > Personal shortcuts > Right selection key and a
device function from the list to assign to the key. See ”Start screen
[standby mode]” on page 15. This menu is not shown in some operator
variants.
Go to options
To assign device functions from a predefined list to the Go to shortcut
list, select Go to > Options > Select 'Go to' options.
Select Go to > Options > Organise 'Go to' options to rearrange the
functions on your personal shortcut list. See ”Start screen [standby
mode]” on page 15.
Voice commands
You can activate certain device functions by saying a voice command.
Up to five functions can be selected for voice commands.
Select Menu> Settings> Personal shortcuts >Voice commands. Select
the function folder that you want, scroll to the function to which you
Settings
63
want to add a voice command, and select Add. A voice command is
indicated with .
When you are using voice commands, the same guidelines in ”Make a
voice tag call” on page 60 apply.
■Display settings
Select Menu >Settings > Display settings and one of the following:
Wallpaper—Set your device to display a background image, known as
wallpaper, when the device is in the standby mode.
Independent of the screen saver settings, for power saving purposes, a
digital clock view will be activated when no function of the device has
been used for a certain time.
Colour schemes—Change the colour in some display components, such
as indicators, the signal bar, the battery bar, and the background image
that appears when using a menu function.
Menu view—Set the way the device displays the main menu.
Operator logo—Set your device to display or hide the operator logo.
Screen saver—Select Select s. saver to choose an animation or a still
image as screen saver from Gallery. Select in Time-out the time after
which the screen saver will be activated. Select On to activate the
screen saver. Select Off to deactivate the screen saver.
■Time and date settings
Select Menu > Settings >Time and date settings, and one of the
following:
Clock—Set the device to show or hide the clock in the standby mode,
adjust the clock, and select time zone and the time format.
Date—Set the device to show or hide the date in the standby mode, set
the date, and select the date format and date separator.
Auto-update of date & time [network service]—Set the device to
automatically update the time and date according to the current time
zone.
Settings
64
■Call settings
Select Menu > Settings > Call settings and one of the following:
Call divert [network service]—Divert your incoming calls. For details,
contact your service provider.
Anykey answer—Select On, and you can answer an incoming call by
briefly pressing any key, except Power, or End.
Automatic redial—Select On, and your device will make a maximum of
10 attempts to connect the call after an unsuccessful call attempt.
Speed dials—Select On. To dial the names and phone numbers assigned
to the speed dial keys from 2 to 9, press and hold the corresponding
number key.
Call waiting—Select Activate for the network to notify you of an
incoming call while you have a call in progress [network service].
Summary after call—Select On, and the device will briefly display the
approximate duration and cost [network service] of the call after each
call.
Send my caller ID [network service]—Select Set by network, Yes, or No.
Line for outgoing calls [network service]—Select phone line 1 or 2 for
making calls. This option is shown only if supported by your SIM card.
■Phone settings
Select Menu >Settings >Phone settings and one of the following:
Phone language—Set the display language of your device. If you select
Automatic the device selects the language according to the information
on the SIM card.
Memory status—View the amount of free, used, and total amount of
memory for each function. You may also find memory information in the
menus of some functions. For more information on shared memory, see
”Shared memory” on page 8.
Automatic keyguard—Set the keypad of your device to lock
automatically after a preset time delay when the device is in the
Settings
65
standby mode and no function of the device has been used. Select On,
and you can set the time from 5 seconds to 60 minutes.
When the keyguard is on, calls still may be possible to the official
emergency number. Key in the emergency number, and press Call.
Security keyguard—See ”The security keyguard” on page 27.
Cell info display—Select On to receive information from the network,
depending on the network cell used [network service].
Welcome note—Key in the note you would like to be shown briefly when
the device is switched on. To save the note, select Save.
Operator selection—Select Automatic, and the device automatically
selects one of the cellular networks available in your area. Select
Manual, and you can select a network that has a roaming agreement
with your service provider.
Confirm SIM service actions—See ”SIM services” on page 90.
Help text activation—Select whether the device shows the help texts.
Start-up tone—Select whether the device plays a start-up tone when
switched on.
■Connectivity settings
You can define the settings for Bluetooth connections, Infrared
connections and GPRS dial-up connections. For more information on
Bluetooth connections, see ”Bluetooth connectivity” on page 91. For
more information on Infrared connections, see ”Infrared” on page 94.
For more information on GPRS connections, see ”GPRS” on page 95.
■Enhancement settings
The enhancement settings menu is shown only if the device is or has
been connected to a compatible mobile enhancement, charger, or
hands-free unit.
Select Menu > Settings > Enhancement settings. You can select an
enhancement menu if the corresponding enhancement is or has been
connected to the device.
Settings
66
■Configuration settings
Some of the network services need to have the correct configuration
settings on your device. Get the settings from a service provider as a
configuration message, or enter your personal settings manually.
Configuration settings from up to 10 different service providers can be
stored in the device and can be managed within this menu.
Select Menu >Settings > Configuration settings and one of the
following:
Default configuration settings—View the list of service providers stored
on the device [the default service provider is highlighted], and select
another service provider as default. Scroll to a provider, and select
Details to view the list with supported applications. To delete a service
provider from the list, select Options > Delete.
Activate default in all applications—Set the applications to use the
settings from the default service provider.
Preferred access point—Select another access point. Normally the access
point from your service provider is to be used.
To enter, view, and edit the settings manually, select Menu > Settings >
Configuration settings > Personal configuration settings. To add a new
configuration, select Add new or Options > Add new. Choose one of the
application types from the list and enter all the necessary settings. To
activate the settings, select Back.
To view or to edit the user-defined settings, select the application that
you want to view, and select the setting to edit.
■Security settings
When security features that restrict calls are in use [such as call barring,
closed user group, and fixed dialling] calls still may be possible to the
official emergency number programmed into your device.
Select Menu >Settings > Security settings and one of the following:
PIN code request—Set the device to request your PIN code every time the
device is switched on. Some SIM cards do not allow the PIN code request
to be turned off.
Settings
67
Call barring [network service]—Restrict incoming calls to and outgoing
calls from your device. A barring password is required.
Fixed dialling—Restrict your outgoing calls to selected phone numbers if
this function is supported by your SIM card.
Closed user group [network service]—Specify the group of people whom
you can call and who can call you.
Security level—Select Phone for device to request the security code
whenever a new SIM card is inserted. Select Memory for the device to
request the security code when the SIM card memory is selected and
you want to change the memory in use.
Access codes—Change the security code, PIN code, PIN2 code, or barring
password.
■Restore factory settings
To reset some of the menu settings to their original values, select Menu
>Settings > Restore factory settings.
■Operator menu
This menu lets you access a portal to services provided by your service
provider. This menu is operator specific. The name and the icon depend
on the operator. For more information, contact your service provider.
The operator can update this menu with a service message. For more
information, see ”Service inbox” on page 86.
Gallery
68
13. Gallery
In this menu, you can manage graphics, images, video clips,
recordings, themes, and tones. These files are arranged in
folders.
Your device supports a Digital Rights Management [DRM] system to
protect acquired content. A piece of content [for example, a ringing
tone] can be protected and associated with certain usage rules [for
example number of usage times and a certain usage period]. The rules
are defined in the activation key of the content, which can be delivered
either together with the content or independently, depending on the
service provider. You may be able to update these activation keys.
Always check the delivery terms of any content and activation key
before acquiring them, as they may be subject to a fee.
Copyright protections may prevent some images, ringing tones, and
other content from being copied, modified, transferred, or forwarded.
1. Select Menu > Gallery.
A list of folders is displayed. Images, Video clips, Themes, Graphics,
Tones, and Recordings are the default folders on the device.
2. Scroll to a folder, and select Open to view a list of files in the folder
or Options to choose from additional options.
3. After you open a folder, select the file that you want to view, and
select Open.
If you selected the Themes folder, scroll to a theme, and select Open
>View to view the theme package. To choose it as your theme, select
Options > Apply theme.
4. After you open a file, you can select Options to choose from
additional options.
Camera
69
14. Camera
You can take photos or record video clips with the built-in
camera. The camera produces pictures in JPEG format and
the video clips in 3GP format.
The Nokia 6822 device supports an image capture resolution of 640 x
480 pixels. The image resolution in these materials may appear
different.
■Photos and video clips
Select Menu > Camera. The live image appears
on the display, and you can use the display as a
viewfinder. Scroll left and right to change the
camera mode: Standard photo, Portrait photo, or
Video, or Night mode [if the lighting is dim for
taking photos]. If you want to add the photo to a
name or a phone number saved in contacts,
select Portrait photo.
Take a photo
Select Capture. A shutter sound is heard. The device saves the photo in
the Images folder of the Gallery menu.
If you want to send the photo as a multimedia message, select Send.
Select Back to take another photo or Options and select an option to
rename or zoom the saved photo, set the contrast, see the details, set
the photo as wallpaper, open the gallery, or delete the photo.
You can activate the self-timer of the camera for one picture at a time.
Put the camera in photo mode, select Options > Self-timer >Start, and
after the timeout, the camera takes the photo. While the self-timer is
running, a beeping sound is heard.
Record a video
To start recording a video clip, select Record. When you are recording a
video clip, the remaining recording time is shown on the top of the
display.
Camera
70
To pause the recording, select Pause. To resume the recording, select
Continue. To stop the recording, select Stop. The device saves the
recording in the Video clips folder of the Gallery menu. To view the
recorded video clip, select Play.
Select Back to start recording a new video clip or Options and select an
option to delete or rename the saved video clip, set the contrast, see the
details, send it as a multimedia message, open the gallery, or mute/
unmute the microphone.
■Camera settings
Select Menu >Camera >Options. Depending on the active camera mode,
the following options may appear: Change mode, Self-timer, Mute/
Unmute, Open Gallery, Settings [to adjust the camera settings], Default
mode, Image quality, Video clip length, Camera sounds, and Default title.
Organiser
71
15. Organiser
You can organize tasks using the tools and features in the
Organiser menu.
■Alarm clock
You can set the device to sound an alarm at a desired time.
Select Menu > Organiser > Alarm clock.
To set the alarm, select Alarm time, and enter the alarm time. To change
the alarm time when the alarm time is set, select On. Select Repeat
alarm to set the device to alert you on selected days of the week.
Select Alarm tone and select the default alarm tone to personalise the
alarm tone, select one from the ringing tone list or from Gallery.
When the alarm time expires, the device sounds an alert tone and
flashes Alarm! and the current time on the display, even if the device is
switched off. Select Stop to stop the alarm. If you let the device
continue to sound the alarm for a minute or select Snooze, the alarm
stops for about 10 minutes, then resumes.
If the alarm time is reached while the device is switched off, the device
switches itself on and starts sounding the alarm tone. If you Select Stop,
the device asks whether you want to activate the device for calls. Select
No to switch off the device or Yes to make and receive calls. Do not
select Yes when wireless device use may cause interference or danger.
■Calendar
Select Menu > Organiser > Calendar.
The current day is indicated by a frame. If there are any notes set for the
day, the day is in bold type. To view the day notes, select View. To view a
week, select Options > Week view. To view a single note, select View.
Other options for the calendar view may be options to create a note;
delete, edit, move, and repeat a note; copy a note to another day; or
send a note directly to another compatible device as a note, text
message, or a multimedia message.
Organiser
72
In Settings you can set the date, time, time zone, date and time format,
and the first day of the week. In the Auto-delete notes option you can
set the device to delete old notes automatically after a specified time.
To delete all notes in the calendar, select the month or week view and
select Options > Delete all notes.
Make a calendar note
Select Menu >Organiser > Calendar. Scroll to the date you want, and
select Options > Make a note. Select one of the following note types:
Meeting, Call, Birthday, Memo, or Reminder.
Calendar note alarms
The device must be turned on to sound a calendar note alarm tone. If
you want to set an alarm that will sound while the device is turned off,
see ”Alarm clock” on page 71.
When the device sounds an alarm for a calendar note, the device beeps,
and displays the note. With a call note on the display, you can call
the displayed number by pressing Call. To stop the alarm and view the
note, select View. Select Snooze, and the device sounds an alarm again
after 10 minutes. To stop the alarm without viewing the note, select
Exit.
■To-do list
You can save a note for a task that you have to do, select a priority level
for the note, and mark it as done when you complete it. You can sort the
notes by priority or by date.
Select Menu > Organiser > To-do list.
Select Add note to make a note. Enter the note, and select Save. Select
the priority for the note. The device automatically sets the deadline
without an alarm for the note. To change the deadline, view the note,
and select the deadline option.
When viewing a note, you can select Options to view and delete the
selected note and delete all the notes that you have marked as done.
Organiser
73
You can sort the notes by priority or by deadline, send a note to another
device, save a note as a calendar note, or access the calendar. You can
also select an option to edit the selected note, edit the deadline or
priority for the note, or mark the note as done.
■Notes
You can use this application for writing and sending notes to
compatible devices by MMS.
Select Menu >Organiser> Notes. The device will ask you to set the date
and time if they have not already been set when you start to write a
note. To add a note, select Add note. Enter the note, and select Save; or
scroll to a note, and select View or Options to see the options for notes.
■Wallet
In Wallet you can save personal information such as credit card
numbers and addresses. The data saved in the wallet can easily be
retrieved to automatically fill in data fields when making purchases
while browsing, as long as the service supports wallet functionality. You
can also save access codes to mobile services that request a user name
and password.
If you have tried to access or have accessed confidential information
requiring passwords, empty the cache after each use. To empty the
cache, see ”Cache memory” on page 86.
Set wallet code
The data in the wallet is protected with a wallet code that you can
define when you access the wallet for the first time. At Create wallet
code:, enter the code, and select OK to confirm it. At Verify wallet code:,
enter the code again, and select OK.
Delete wallet content
If you want to delete all the content of the wallet along with the wallet
code, enter *#7370925538# in the standby mode. You also need the
device security code [see ”Access codes” on page 28].
Organiser
74
Use the wallet
To set up your personal information, use the wallet menu. To use the
content of the wallet in a mobile service, access the wallet through the
browser [see ”Web” on page 82].
To use the wallet feature, select Menu > Applications >Organiser >
Wallet. Enter your wallet code, select OK and select one of the
following:
Wallet profiles—When you have saved your personal card details, you
can combine them together into a wallet profile. You can use the profile
to retrieve wallet data from different cards while browsing.
Cards—Use this option to create and save Payment cards, Loyalty cards,
Access cards, User info cards, or Address cards. For availability of
receiving card information as configuration settings, contact the card
issuer or your service provider.
Tickets—Save notifications for e-tickets you have bought through a
mobile service.
Receipts—Save mobile purchase receipts.
Personal notes—Save personal information, such as account numbers,
passwords, codes, or notations. Personal notes are protected with the
wallet PIN code. When viewing a note, select Options and Send via text
msg. to copy the note as a text message; Copy to calendar to copy the
note to the calendar as a memo; Use detail to extract numbers, e-mail
addresses, and web addresses from a note; and Delete to delete the note
you are viewing.
Settings—Use this option to change wallet settings.
■Synchronisation
Synchronisation allows you to save your calendar and contacts data on
a remote Internet server [network service] or on a compatible PC. If you
have saved data on the remote Internet server, you can synchronise your
device by starting the synchronisation from your device. You can also
synchronise the data in the contacts list, calendar, and notes of your
Organiser
75
device to correspond to the data of your compatible PC by starting the
synchronisation from your PC.
The contact data in your SIM card will not be synchronised.
Synchronise from your device
Before synchronising from your device, you need to subscribe to a
synchronisation service and get the configuration settings from your
service provider. For more information on availability and the
synchronisation service settings, contact your service provider.
To start the synchronisation from your device, do the following:
1. Activate the connection settings you need for the synchronisation.
See ”Synchronisation settings” on page 75.
2. Select Menu >Organiser >Synchronisation >Server sync > Data to be
synchronised, mark the data to be synchronised, and select Done
>Synchronise.
The marked data of the active set will be synchronised after
confirmation.
Synchronisation settings
You may receive the synchronisation settings for your device as a
configuration message from the service provider. For more information
on availability and the synchronisation service settings, contact your
service provider. To enter the settings manually, see ”Configuration
settings” on page 66.
Select Menu > Organiser > Synchronisation > Server sync > Sync
settings > Configuration. Select the service provider whose settings you
want to activate, and press Select. Select Account info to see the
accounts provided by the service provider. If more than one account is
displayed, choose the one you want to use.
Synchronise from your compatible PC
You must use Bluetooth, Infrared, or a data cable to connect your device
to a PC to synchronise contacts, the calendar, and the notes from your
Organiser
76
PC. To view compatible data cables, see ”Enhancements” on page 100.
You also need the PC Suite software of your device installed on the PC.
Start the synchronisation from the PC using PC suite.
Verify that the device is in the standby mode and that the time and date
are set.
Applications
77
16. Applications
The Applications menu includes pre-installed games
and extra features. New applications and games may
also be downloaded.
■Games and applications
Your device software may include some games and Java applications
specially designed for this Nokia device.
Launching a game or an application
Select Menu > Applications > Games > Select game or Collection >
Select application. Scroll to a game or an application, and select Open.
Game and application downloads
Your device supports J2ME Java applications. Make sure that the
application is compatible with your device before downloading it.
Select Menu > Applications, then Games >Game downloads or
Collection > App. downloads. The list of available bookmarks is shown.
Select More bookmarks to access the list of bookmarks in the Web
menu. See ”Bookmarks” on page 85.
Select a bookmark to connect to the desired service. For the availability
of different services, pricing, and tariffs, contact your service provider.
Warning: Only install and use applications from sources that
offer adequate security and protection against harmful
software.
Downloaded applications may be saved in the Games menu instead of
the Applications menu.
Game settings
Select Menu > Applications >Games > App. settings to set sounds,
lights, and shakes for games.
Applications
78
Memory status for games and applications
To view the amount of memory available for game and application
installations [third shared memory], select Menu > Applications >
Games or Collection > Memory.
■Voice recorder
You can record pieces of speech, sound, or an active call for up to
1 minute and 40 seconds. This is useful when recording a name and
phone number to write down later.
The recorder cannot be used when a data call or GPRS connection is
active.
Record
1. Select Menu > Applications > Extras > Voice recorder.
2. To start the recording, select Record. To start the recording during a
call, select Options > Record.
While recording a call, all parties to the call will hear a faint beeping
sound every 5 seconds approximately.
3. To end the recording, select Stop.
The recording is saved in the Recordings folder of the Gallery menu.
4. To listen to the latest recording, select Play last recorded.
5. To send the latest recording, select Send last recorded.
List of recordings
Select Menu > Applications > Extras > Voice recorder >Recordings list.
The list of folders in the Gallery is shown. Open Recordings to see the list
with recordings.
■Calculator
The calculator in your device adds, subtracts, multiplies, divides,
calculates the square and the square root, and converts currency values.
1. Select Menu > Applications >Extras >Calculator.
Applications
79
2. When 0 is displayed on the screen, enter the first number in the
calculation.
Press # for a decimal point.
3. Select Options > Add, Subtract, Multiply, Divide, Square, Square root,
or Change sign.
4. Enter the second number.
5. To get the answer, select Equals. Or to start a new calculation, press
and hold Clear.
Note: This calculator has a limited accuracy and rounding errors
may occur, especially in long divisions.
Performing a currency conversion
Note: When you change base currency, you must enter the new
rates because all previously set exchange rates are set to zero.
1. Select Menu > Applications >Extras >Calculator.
2. To save the exchange rate, select Options > Exchange rate:.
3. Select either of the displayed options. Enter the exchange rate, press
# for a decimal point, and select OK.
The exchange rate remains in the memory until you replace it with
another one.
4. To perform the currency conversion, enter the amount to be
converted, and select Options > In domestic or In foreign.
■Countdown timer
Select Menu> Applications >Extras >Countdown timer. Enter the alarm
time in hours, minutes, and seconds, and select OK. You can write your
own text to be displayed when the time expires, and select Start to start
the countdown timer.
To change the countdown time, select Change time; or to stop the timer,
select Stop timer.
Applications
80
If the alarm time is reached when the device is in the standby mode, the
device sounds a tone and flashes the note text if it is set; otherwise, it
flashes the text Countdown time up.
To stop the alarm, press any key. If no key is pressed, the alarm
automatically stops within 30 seconds. To stop the alarm and delete the
note text, select Exit.
■Stopwatch
You can use the stopwatch to measure time, take intermediate times, or
take lap times.
Using the stopwatch or allowing it to run in the background when using
other features increases the demand on battery power and reduces
battery life.
Time observation and time splitting
Select Menu> Applications > Extras > Stopwatch > Split timing. Select
Start to start the time observation. Select Split every time you want to
take an intermediate time; the intermediate times are listed below the
running time on the display. Select Stop to stop the time observation. To
save the times, select Save. Select Options, and you can start the time
observation again or reset the times without saving.
Lap times
Select Menu > Applications > Extras >Stopwatch > Lap timing. Select
Start to start the time observation and Lap to take a lap time. Select
Stop to stop the lap timing. To save the times, select Save and enter a
name. Or select Options, and you can start the timer again or reset the
lap times.
Device features while timing
If you have already started the stopwatch and want to use other device
features while the stopwatch continues to run, simply press End to
return to the standby mode. To return to the stopwatch, select Menu >
Applications > Extras > Stopwatch >Continue.
Applications
81
Using the stopwatch or allowing it to run in the background when using
other features increases the demand on battery power and reduces
battery life.
Viewing and deleting times
Select Menu >Applications > Extras> Stopwatch.
If the stopwatch is not reset, you can select Show last to view the most
recent measured time. Select View times, and you can select from a list
of names or final times of the time sets.
To delete the saved times, select Delete times. Select Delete all > Yes or
select One by one. Scroll to the times you want to delete, and select
Delete > Yes.
Web
82
17. Web
Your device has a browser that you can use to access
various mobile Internet services.
Check the availability of these services, pricing, and
tariffs with your
service provider.
With the browser you can view the services that use Wireless Mark-Up
Language [WML] or extensible HyperText Mark-up Language [XHTML]
on their pages. Appearance may vary due to screen size. You may not be
able to view all the details of the Internet pages.
■Access and use services
1. Save the service settings that are required to access the service that
you want to use. See ”Set up the device to access a service” on page
82.
2. Make a connection to the given service. See ”Connecting to a
service” on page 83.
3. Start browsing the pages of the service. See ”Browse the pages of a
service” on page 83.
4. Once you are finished browsing, end the connection to the service.
See ”Disconnect from a service” on page 84.
■Set up the device to access a service
Your device may already have some service settings stored. Additional
settings may be received as a configuration message from the service
provider that offers the service you want to use. For more information
and for the appropriate settings, contact your service provider. See also
”Configuration settings” on page 66.
Web
83
■Connecting to a service
Make sure that the service settings of the service you want to use are
activated. To activate the settings, select Menu > Web >Settings >
Configuration settings > Configuration and select the configuration set
you want to activate.
Connect to the service by one of the following methods:
• Open the homepage of the service provider: select Menu> Web >
Home, or in the standby mode, press and hold the 0 key.
• Open a bookmark of the service: select Menu > Web > Bookmarks
and select a bookmark. If the bookmark does not work with the
current active service settings, activate another set of service
settings and try again.
• Access the last URL: select Menu > Web > Last web addr..
• Enter the address of the service: select Menu> Web >Go to address.
Enter the address of the service, and select OK.
■Browse the pages of a service
After you have connected to the service, you can start browsing its
pages. The function of the device keys may vary in different services.
Follow the text guides on the device display. For more information,
contact your service provider.
If GPRS is selected as the data bearer, the indicator is shown on the
top left of the display during browsing. If you receive a call or a text
message, or make a call during a GPRS connection, the indicator will
be shown on the top left of the display to indicate that the GPRS
connection is suspended [on hold]. After a call, for example, the device
tries to reconnect the GPRS connection. See also ”GPRS connection” on
page 95.
If you have tried to access or have accessed confidential information
requiring passwords, empty the cache after each use. To empty the
cache, see ”Cache memory” on page 86.
Web
84
Device keys while browsing
• Use any of the scroll keys to browse through the page.
• To select a highlighted item, press Call, or select Options to select the
option for opening the link.
• To enter letters and numbers, press the keys 1–9. To enter special
characters, press *.
Direct calling
While browsing, you can make a voice call, send DTMF tones while a
voice call is in progress, and save a name and a phone number from a
page.
■Disconnect from a service
To quit browsing and end the connection, select Options> Quit.
Press End twice, or press and hold End.
■Appearance settings of the browser
While browsing, select Options > Other options > Appear. settings; or in
the standby mode, select Menu > Web > Settings> Appearance settings
and one of the following:
Text wrapping—Select On, and the text continues on the next line. If you
select Off, the text will be abbreviated.
Font size—Select a font size.
Show images—Select No, and any pictures appearing on the page are
not shown.
Alerts—Select Alert for unsecure connection and Yes to set the device to
alert when a secure connection changes to an insecure one during
browsing. Select Alert for unsecure items and Yes to set the device to
alert when a secure page contains an insecure item. These alerts do not
guarantee a secure connection. For more information, see ”Browser
security” on page 87.
Web
85
Character encoding—Select the character set that the device uses to
show browser pages that do not include that information, or select
whether to always use UTF-8 encoding when sending a Web address to
a compatible device.
■Cookies
A cookie is data that a site saves in the cache memory of the browser,
[for example, your user information or your browsing preferences].
Cookies will be saved until you clear the cache memory. See ”Cache
memory” on page 86.
While browsing, select Options > Other options > Security > Cookie
settings; or in the standby mode, select Menu >Web > Settings >
Security settings > Cookies. Select Allow or Reject to allow cookies or
prevent the device from receiving them.
■Bookmarks
You can save page addresses as bookmarks in the device memory.
1. While browsing, select Options >Bookmarks; or in the standby mode,
select Menu >Web > Bookmarks.
2. Select the bookmark that you want to use and press Select to make a
connection to the page associated with the bookmark.
Select Options to view the title and the address of the selected
bookmark, edit or delete the selected bookmark, send it directly to
another device as a bookmark or text message, or create a new
bookmark.
Your device may have some bookmarks loaded for sites not affiliated
with Nokia. Nokia does not warrant or endorse these sites. If you choose
to access them, you should take the same precautions for security or
content as you would with any Internet site.
Web
86
Receive a bookmark
When you receive a bookmark, 1 bookmark received is displayed. Select
Show to view the bookmark. To save the bookmark, select Save. Select
Options > View to see the details or Delete to discard it.
■Download
To download more tones, graphics, games, videos, themes, or
applications to your device [network service], select the type of
download to receive.
Warning: Only install applications from sources that offer
adequate protection against harmful software.
For the availability of different services, pricing, and tariffs,
contact your service provider.
■Cache memory
The information or services that you access are stored in the cache of
your device. A cache is a buffer memory, which is used to store data
temporarily. To empty the cache while browsing, select Options >Other
options > Clear the cache; or in the standby mode, select Menu > Web >
Clear the cache.
■Service inbox
The device is able to receive service messages [pushed messages] sent by
your service provider [network service]. Service messages are, for
example, notifications of news headlines, and they may contain a text
message or an address of a service.
When you receive a service message in the standby mode, select Show
to access the message in the Service inbox. If you select Exit, the
message is moved to the Service inbox. To access the Service inbox later,
select Menu > Web > Service inbox.
To access the Service inbox while browsing, select Options > Other
options > Service inbox. Scroll to the message that you want, and select
Retrieve to activate the browser and download the marked content. To
Web
87
display detailed information on a service notification or to delete it,
select Options > Details or Delete, respectively.
Service inbox settings
Select Menu > Web > Settings >Service inbox settings and one of
the following:
Service messages—Select On or Off to set the device to receive or not
receive service messages.
Message filter—Select Message filter on to set the device to receive
service messages only from content authors approved by the service
provider. To view the list of the approved content authors, select Trusted
channels.
Automatic connection—If you set the device to receive service messages
and select On, the device will automatically activates the browser from
the standby mode when the device receives a service message. If you
select Off, the device will activates the browser only after you have
select Retrieve when the device receives a service message.
■Browser security
Security features may be required for some services, such as banking
services or online shopping. For such connections, you need security
certificates and possibly a security module, which may be available on
your SIM card. For more information, contact your service provider.
Security module
The security module can contain certificates as well as private and
public keys. The purpose of the security module is to improve security
services for applications requiring browser connection, and it allows you
to use a digital signature. The certificates are saved in the security
module by the service provider. See ”Access codes” on page 28.
Select Menu > Web > Settings > Security settings > Security module
settings and one of the following:
Web
88
Security module details—Show the security module title, status,
manufacturer, and serial number.
Module PIN request—Set the device to request the module PIN when
using services provided by the security module. Enter the code, and
select On. To disable the module PIN request, select Off.
Change module PIN—Change the module PIN, if allowed by the security
module. Enter the current module PIN code; then enter the new code
twice.
Change signing PIN—Select the signing PIN that you want to change.
Enter the current PIN code, then enter the new code twice.
Certificates
There are three kinds of certificates:
Server certificates—Used by the device to create a connection with
improved security to the content server. The device receives the server
certificate from the service provider before the connection is
established, and its validity is checked using the authority certificates
saved in the device. Server certificates are not saved.
The security indicator is displayed during a connection if the data
transmission between the device and the content server is encrypted.
The security icon does not indicate that the data transmission between
the gateway and the content server [or place where the requested
resource is stored] is secure. The service provider secures the data
transmission between the gateway and the content server.
Authority certificates—Used by some services, such as banking services,
for checking the validity of other certificates. Authority certificates can
either be saved in the security module by the service provider, or they
can be downloaded from the network if the service supports the use of
authority certificates.
User certificates—Issued to users by a Certifying Authority. User
certificates are required [for example, to create a digital signature], and
they associate the user with a specific private key on a security module.
Web
89
Note: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably
smaller, they must be used correctly in order to benefit from
increased security. The existence of a certificate does not offer
any protection by itself; the certificate manager must contain
correct, authentic, or trusted certificates for increased security
to be available. Certificates have a restricted lifetime. If
Certificate invalid according to phone's date or User certificate
not valid yet is shown even if the certificate should be valid,
check that the current date and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.
Digital signature
You can make digital signatures with your device if your SIM card has a
security module. The signature can be traced back to you by the private
key on the security module and the user certificate that was used to
perform the signature. Using the digital signature can be the same as
signing your name to a paper bill, contract, or other document. See
”Security module” on page 87.
To make a digital signature, select a link on a page, such as the title of
the book that you want to buy and its price. The text to sign [possibly
including amount, date, etc.] will be shown.
Check that the header text is Read and that the digital signature icon
is shown.
Note: If the digital signature icon does not appear, there is a
security breach, and you should not enter any personal data
such as your signing PIN.
To sign the text, read all of the text first; and then you can select Sign.
The text may not fit within a single screen. Therefore, make sure to scroll
through and read all of the text before signing.
Web
90
Select the user certificate you want to use. Enter the signing PIN, and
select OK. The digital signature icon will disappears, and the service may
display a confirmation of your purchase.
■SIM services
In addition to the functions available on the device, your SIM card may
provide services that you can access in this menu item, which is shown
only if it is supported by your SIM card. The name and contents of the
menu depend on the SIM card.
For availability, rates, and information on using SIM services, contact
your SIM card vendor, for example, the service provider or other vendor.
Depending on the operator, you can set the device to show you the
confirmation messages sent between your device and the network when
you are using the SIM services. Select Menu> Settings > Phone settings
> Confirm SIM service actions >Yes.
Accessing these services may involve sending messages or making a
phone call for which you may be charged.
Connectivity
91
18. Connectivity
■Bluetooth connectivity
Bluetooth connectivity enables cost-free wireless connections between
electronic devices within a maximum range of 10 meters [30 feet]. A
Bluetooth connection can be used to send and receive images, texts,
gallery files, voice recordings, video clips, notes, business cards, and
calendar notes. It can also be used to connect wirelessly to products
that use Bluetooth wireless technology, such as computers. You can
synchronise your device and your PC using a Bluetooth connection.
Since devices with Bluetooth connectivity communicate using radio
waves, your device and the other device do not need to be in direct
line-of-sight.The two devices only need to be within a maximum of 10
meters [30 feet] of each other, although the connection can be subject
to interference from obstructions such as walls or from other electronic
devices. The Bluetooth application consumes the battery and reduces
the operating time of the device. Take this into account when
performing other operations with your device.There may be restrictions
on using devices with Bluetooth connectivity. Check with your local
authorities.Your device supports Bluetooth specification 1.1 and the
following profiles:
• SIM access profile
• Object push profileFile transfer profileDial-up networking
profileHeadset profileHands-free profileGeneric access profileSerial
port profileGeneric access exchange profile
For compatibility between your device and another device with
Bluetooth connectivity, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices to determine
their compatibility with this device.
Set up a Bluetooth connection
1. Select Menu >Settings > Connectivity > Bluetooth.
2. To activate the Bluetooth function, select Bluetooth > On.
Connectivity
92
The active Bluetooth connection is indicated by at the top of
the display.
3. Select Search for audio enhancements to search for compatible
devices with Bluetooth connectivity.
The list of found devices appears in the display.
4. Select the desired device
5. If required, enter the Bluetooth passcode of the device to pair with
the device. For information on the Bluetooth passcode, see ”Pairing”
on page 92.
Your device connects to the device. You can start data transfer.
6. To view the device you are connected to, select Active device.
7. To deactivate Bluetooth, select Bluetooth > Off.
Pairing
You can set up a permanent pairing [association] between your device
and another device with Bluetooth connectivity. Some devices may
require pairing before data transfer can take place.
To pair with a device, you and the owner of the other device must agree
on a passcode of 1–16 numeric characters. The first time you try to
connect the devices, you must each enter the same passcode. Once the
devices are paired, you will not need to use the passcode again, so there
is no need to remember it.Paired devices are placed in your paired device
list. You can view the list even when Bluetooth is not active or when the
devices in the list are not available for connection.To view the paired
device list, do the following:
1. From the menus, select Settings >Connectivity> Bluetooth > Paired
devices.
2. Scroll to the desired device, and select Options and one of the
following:
Assign short name—Give a nickname [visible to you only] to the
selected device.
Connectivity
93
Auto-conn. with- out confirmation—Select Yes if you want the
device to connect to the selected device automatically or No if you
want the device to ask for your permission first.
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth
connectivity within range, scroll to the desired device, and select Pair
to establish pairing with that device.
Settings
You can define how your device is shown to other devices with
Bluetooth connectivity.
Select Menu > Settings > Bluetooth > Connectivity >Bluetooth settings
and one of the following:
My phone's visibility—Select Shown to all to show the device to all other
devices with Bluetooth connectivity or Hidden to show the device only
to the paired devices.
My phone's name—Change your device name that is seen by other users.
Send data
Instead of using the Settings menu, you can use other device menus to
send various types of data to other devices with Bluetooth connectivity.
You can send a video clip from the Video clips folder of the Gallery
menu. See the appropriate sections of the user guide for information
about sending different types of data.
Receive a data transfer
When a Bluetooth connection is active in your device, you can receive
notes, business cards, video clips, and other types of data transfers from
another device with Bluetooth connectivity.
Before you can receive a data transfer you will be prompted to accept or
reject the incoming transfer. After accepting a data transfer, your device
will receive the transfer.
Connectivity
94
An alarm sounds, and a message appears in the start screen when the
transfer is received.
• To view the transferred item immediately, select Show.
• To save the item for later viewing, select Exit.
Depending on the nature of the item, it is saved in the appropriate menu
in your device. For example, a business card would be saved in Names,
and a calendar note would be saved in Calendar.
■Infrared
The device has an IR port that you can use for connecting your device to
another IrDA compliant device. You can send or receive data such as
business cards and calendar notes to or from a compatible device or
data device, such as a computer. Bluetooth connections and IR
connections cannot be active at the same time.
Do not point the IR [infrared] beat at anyone’s eye or allow it to interfere
with other IR devices. This device is a class 1 laser product.
Send and receive data
• Ensure that the IR ports of the sending and receiving devices are
pointing at each other and that there are no obstructions between
the devices.
• To activate the IR port of your device, select Menu >Settings
>Connectivity> Infrared.
• The user of the sending device selects the desired IR function to start
data transfer.
If the data transfer is not started within 2 minutes after the activation
of the IR port, the connection is cancelled and has to be started again.
Connecting icon
When blinks continuously, the IR connection has been activated
and your device is ready to send or receive data using its IR port.
The IR connector deactivates automatically.
Connectivity
95
■GPRS
GPRS [general packet radio service] is a network service that allows
mobile devices to be used for sending and receiving data over an
Internet protocol IP-based network.
EGPRS [enhanced GPRS], also known as EDGE [enhanced data rates for
global evolution], is similar to GPRS. For more information on the
availability of EGPRS and data transfer speed, contact your service
provider.
When you have selected GPRS as a data bearer, the device uses EGPRS
instead of GPRS if it is available in the network. You cannot select
between EGPRS and GPRS in your device, but for some applications, you
may be able to select either GPRS or GSM data [CSD—circuit switched
data] as the data bearer. The data bearer is part of the preferred access
point and can be changed in Configuration settings [see ”Configuration
settings” on page 66].
The applications that may use GPRS are MMS, instant messaging,
browsing sessions, e-mail, remote SyncML, Java application
downloading, and the PC dial-up [for example, Internet and e-mail].
Before you can use GPRS technology, contact your service provider for
availability of and subscription to the GPRS service and save the GPRS
settings for each of the applications used over GPRS.
GPRS connection
Select Menu > Settings > Connectivity > GPRS > GPRS connection and
one of the following:
Always online—Set the device to automatically register to a GPRS
network when you switch the device on.
When needed—Set the device to establish GPRS registration and
connection when an application using GPRS needs it and to close the
connection when you end the application.
Connectivity
96
GPRS modem settings
You can connect the device by a data cable connection to a compatible
PC and use the device as a modem to enable GPRS connectivity from the
PC.
To define the settings for GPRS connections from your PC, select Menu
>Settings > Connectivity >GPRS >GPRS modem settings, and one of the
following:
Active access point—Activate the access point that you want to use.
Edit active access point—Change the access point settings:
•Alias for access point—Enter a name for the activated access point,
and select OK.
•GPRS access point—Enter the access point name [APN] to establish a
connection to a GPRS network, and select OK. Contact your service
provider for the APN.
You can also set the GPRS dial-up service settings [access point name]
on your PC using the Nokia Modem Options software, see ”PC Suite” on
page 97. If you have set the settings both on your PC and on your device,
then the PC settings will be used.
PC connectivity
97
19. PC connectivity
You can send and receive e-mail and access the Internet when you use
Bluetooth, Infrared, or a data cable to connect your device to a
compatible PC. You can use a variety of PC connectivity and data
communications applications with your device. With PC Suite you can
synchronise contacts, calendar, and notes between your device and the
compatible PC or a remote Internet server [network service].
You may find more information and downloadable files, including PC
Suite, in the support area on the Nokia website www.nokia.com.
Copyright protections may prevent some images, ringing tones, and
other content from being copied, modified, transferred, or forwarded.
■PC Suite
PC Suite allows you to transfer and synchronise information between
your device and your PC. With PC Suite, you can edit contacts in your
device, install J2ME Java applications [such as games and dictionaries]
from a compatible PC to the device, and backup and restore personal
data between your device and a compatible PC. To see the
comprehensive features offered by PC Suite, you can download the
application from the Nokia website www.nokia.com.
■GPRS, EGPRS, HSCSD, and CSD
You can use the following data services with your device:
• GPRS [general packet radio service]
• EGPRS [enhanced GPRS] [See ”GPRS” on page 95.]
• HSCSD [high speed circuit switched data]
• CSD [circuit switched data—or GSM data]
For availability and subscription to data services, contact your service
provider.
PC connectivity
98
The use of HSCSD services consumes the device battery faster than
normal voice or data calls. You may need to connect the device to a
charger for the duration of the data transfer.
■Data communication applications
For information on using a data communication application, refer to the
documentation provided with it.
Making or answering device calls during a computer connection is not
recommended because it might disrupt the operation.
For better performance during data calls, place the device on a
stationary surface with the keypad facing downward. Do not move the
device by holding it in your hand during a data call.
Reference information
99
20. Reference information
■Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The full performance
of a new battery is achieved only after two or three complete charge
and discharge cycles. The battery can be charged and discharged
hundreds of times but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal, buy a new battery.
Use only Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
Check the model number of any charger before use with this device. This
device is intended for use when supplied with power from the ACP-12
charger.
Unplug the charger from the electrical plug and the device when not in
use. Do not leave the battery connected to a charger. Overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its
charge over time. Temperature extremes can affect the ability of your
battery to charge.
Use the battery only for its intended purpose. Never use any charger or
battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object such as a coin, clip, or pen causes direct
connection of the positive [+] and negative [-] terminals of the battery.
[These look like metal strips on the battery.] This might happen, for
example, when you carry a spare battery in your pocket or purse. Short-
circuiting the terminals may damage the battery or the connecting
object.
Leaving the battery in hot or cold places, such as in a closed car in
summer or winter conditions, will reduce the capacity and lifetime of
the battery. Always try to keep the battery between 15°C and 25°C [59°F
and 77°F]. A device with a hot or cold battery may not work temporarily,
Reference information
100
even when the battery is fully charged. Battery performance is
particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire! Dispose of batteries according to
local regulations. Please recycle when possible. Do not dispose as
household waste.
■Enhancements
A few practical rules about enhancements:
• Keep all enhancements out of the reach of small children.
• When you disconnect the power cord of any enhancement, grasp and
pull the plug, not the cord.
• Check regularly that enhancements installed in a vehicle are
mounted and are operating properly.
• Installation of any complex car enhancements must be made by
qualified personnel only.
If you want to enhance device functionality, a range of enhancements is
available for you. You can select any of these items to help
accommodate your specific communication needs. For availability of
these and other enhancements, contact your dealer.
■Care and maintenance
Your device is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you protect
your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids
or moisture can contain minerals that will corrode electronic
circuits. If your device does get wet, remove the battery and allow
the device to dry completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its moving parts
and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
Reference information
101
• Do not store the device in cold areas. When the device returns to its
normal temperature, moisture can form inside the device and
damage electronic circuit boards.
• Do not attempt to open the device other than as instructed in this
guide.
• Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the device.
• Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
• Use a soft, clean, dry cloth to clean any lenses [such as camera,
proximity sensor, and light sensor lenses].
• Use only the supplied or an approved replacement antenna.
Unauthorised antennas, modifications, or attachments could
damage the device and may violate regulations governing radio
devices.
All of the above suggestions apply equally to your device, battery,
charger, or any enhancement. If any device is not working properly, take
it to the nearest authorised service facility for service.
■Additional safety information
Operating environment
Remember to follow any special regulations in force in any area and
always switch off your device when its use is prohibited or when it may
cause interference or danger. Use the device only in its normal operating
positions. This device meets RF exposure guidelines when used either in
the normal use position against the ear or when positioned at least 2.2
cm (7/8 inch) away from the body. When a carry case, belt clip, or holder
is used for body-worn operation, it should not contain metal and should
position the device at least 2.2 cm (7/8 inch) away from your body.
Reference information
102
In order to transmit data files or messages, this device requires a quality
connection to the network. In some cases, transmision data files or
messages, may be delayed until such a connection is available. Ensure
the above separation distance instructions are followed until the
transmission is completed.
Medical devices
Operation of any radio transmitting equipment, including wireless
phones, may interfere with the functionality of inadequately protected
medical devices. Consult a physician or the manufacturer of the medical
device to determine if they are adequately shielded from external RF
energy or if you have any questions. Switch off your phone in health
care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF energy.
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of
15.3 cm[6 inches] be maintained between a wireless phone and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. To minimize the
potential for interference, persons with pacemakers should
• Always keep the device more than 15.3 cm [6 inches] from their
pacemaker when the device is switched on
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker to minimize the
potential for interference.
If you have any reason to suspect that interference is taking place,
switch off your device immediately.
HEARING AID
Some digital wireless devices may interfere with some hearing aids. If
interference occurs, consult your service provider.
Reference information
103
VEHICLES
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles such as electronic fuel injection
systems, electronic antiskid [antilock] braking systems, electronic speed
control systems, air bag systems. For more information, check with the
manufacturer or its representative of your vehicle or any equipment
that has been added.
Only qualified personnel should service the device, or install the device
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty that may apply to the device. Check regularly
that all wireless device equipment in your vehicle is mounted and
operating properly. Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag, remember that an
air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or
in the air bag deployment area. If in-vehicle wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your
device before boarding an aircraft. The use of wireless teledevices in an
aircraft may be dangerous to the operation of the aircraft, disrupt the
wireless telephone network, and may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially explosive
atmosphere and obey all signs and instructions. Potentially explosive
atmospheres include areas where you would normally be advised to turn
off your vehicle engine. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death. Switch off the device at
refuelling points such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage, and
distribution areas, chemical plants or where blasting operations are in
progress. Areas with a potentially explosive atmosphere are often but
not always clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas
Reference information
104
[such as propane or butane], and areas where the air contains chemicals
or particles such as grain, dust or metal powders.
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, legal action, or both.
EMERGENCY CALLS
Note: Wireless phones, including this device, operate using
radio signals, wireless networks, landline networks, and user-
programmed functions. Because of this, connections in all
conditions cannot be guaranteed. You should never rely solely
on any wireless phone for essential communications like
medical emergencies.
To make an emergency call:
1. If the phone is not on, switch it on. Check for adequate signal
strength. Some networks may require that a valid SIM card is
properly inserted in the phone.
2. Press End as many times as needed to clear the display and ready the
phone for calls.
3. Enter the official emergency number for your present location.
Emergency numbers vary by location.
4. Press Call.
If certain features are in use, you may first need to turn those features
off before you can make an emergency call. If the device is in offline or
flight mode you must change the profile to activate the phone function
before you can make an emergency call. Consult this guide or your
service provider. When making an emergency call, give all the necessary
information as accurately as possible. Your wireless phone may be the
only means of communication at the scene of an accident. Do not end
the call until given permission to do so.
Certification Information [SAR]
THE NOKIA 6822 DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Reference information
105
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency
[RF] energy recommended by international guidelines [ICNIRP]. These
limits establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by
independent scientific organisations through periodic and thorough
evaluation of scientific studies. The standards and guidelines include a
substantial safety margin designed to assure the safety of the public,
regardless of age and health and to account for any variations in
measurements.
The exposure guidelines for mobile devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit stated in the international guidelines is 2.0 W/kg* averaged over
ten grams of tissue. Tests for SAR are conducted using standard
operating positions with the device transmitting at its highest certified
power level in all tested frequency bands. The actual SAR level of an
operating device can be well below the maximum value because the
device is designed to use only the power required to reach the network.
That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value when
tested according to international testing procedures for use at the ear is
0.67 W/kg. Your phone’s device type is listed on the label located under
the battery.
SAR values may vary depending on national reporting and testing
requirements and the network band. Use of device accessories and
enhancements may result in different SAR values. Additional SAR
information in other regions please look under product information at
www.nokia.com.
USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg
averaged over one gram of tissue. Device type PYARM-69 has also been tested
against this SAR limit. The highest SAR value reported under this standard during
product certification for use at the ear is 0.43 W/kg and when properly worn on
the body is 0.61 W/kg. Information about this device can be found on the FCC’s
website at http://www.fcc.gov/oet/fccid by searching the equipment
authorization system using FCC ID PYARM-69.
Reference information
106
■Technical information
Dimensions— 46.1 mm at hinges, 38 mm at bottom; length—106.1 mm;
depth—21.6 mm at top, 17 mm at bottom
Weight—100 g with BL-5C 850 mAh semi fixed Li-ion Battery
Size [volume]—79 cm3
Wireless networks—Nokia 6822: EGSM 900 and GSM 1800 and 1900
networks
Frequency range [Tx]— EGSM 900: 880—915 MHz GSM 1800: 1710—
1785 MHz GSM 1900: 1850—1910 MHz
Frequency range [Rx]—EGSM 900: 925—960 MHz; GSM 1800: 1805—
1865 MHz; GSM 1900: 1930—1990 MHz
Tx output power—2 W [max]
Number of channels—299
Memory size—16-MB flash memory, approximately 2 MB available to
user
Battery voltage—3.7 V dc
Operating temperature— [14 to +131°F] -10 to +55°C
Index
107
Index
Å
access codes 28
access point 66
answer a call 24
antenna 15
B
battery
charge 14
remove 12
Bluetooth connectivity ??–94
browser security
security module for WAP applications 87
C
calls
answer 24
reject 24
charge the battery 14
connectivity
Bluetooth ??–94
D
data bearer 95
digital signature 89
E
earpiece volume 24
I
icons 21
Index
108
indicators 21
install SIM card 12
international calls 23
K
keyguard 27
L
loudspeaker 24
M
menu
customize view 25
how to use 25
messages
deleting 42
e-mail 40
info messages 42
multimedia (MMS) 37
service commands 42
settings 43
text 33
voice 42
Middle selection 15
N
Nokia Customer Care 9
P
Pairing 92
phone label 10
PIN code 28
PIN2 code 28
predictive text
Index
109
add new words 32
PUK and PUK2 codes 28
R
redial last number 23
reject a call 24
S
security code 28
security settings
digital signature 89
settings
call 64
configuration 66
connectivity 65
display 63
enhancements 65
personal shortcuts 62
phone 64
profiles 61
security 66
themes 61
time and date 63
shared memory 8
shortcuts 62
SIM card 12
speaker phone 24
start screen 15
T
time 23
V
Index
110
video recording 69
voice dialing 59
W
wallet
signing documents through WAP 89
WAP services
security module in SIM 87
signing documents 89