Microsoft RM-70X GSM 900/1800/1900 w BT User Manual RM 70 UG en 1 update

Microsoft Mobile Oy GSM 900/1800/1900 w BT RM 70 UG en 1 update

Manual

User guide Nokia 737092XXXXIssue 1
DECLARATION OF CONFORMITYWe, NOKIA CORPORATION declare under our sole responsibility that the product RM-70 is in conformity with the provisions of the following Council Directive: 1999/5/EC.A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Visual Radio, Nokia Connecting People, Xpress-on, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation. Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java is a trademark of Sun Microsystems, Inc.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.92XXXXX/Issue1
4ContentsFor your safety.......................... 6General information................. 9Overview of functions........................... 9Access codes............................................ 9Configuration settings service ........  10Download content and applications 11Nokia support and contact information 111. Get started .........................  12Install SIM card and battery ............  12Charge the battery..............................  13Open and close the phone................  14Switch the phone on and off...........  14Antenna .................................................  15Phone strap...........................................  152. Your phone.........................  16Keys and parts......................................  16Standby mode ......................................  17Keypad lock (keyguard) .....................  193. Call functions.....................  20Make a call ...........................................  20Answer or reject a call.......................  21Options during a call..........................  224. Write text...........................  23Predictive text input ..........................  23Traditional text input.........................  245. Navigate the menus ..........  256. Messaging ..........................  26Text messages (SMS)..........................  26SIM messages.......................................  27Multimedia messages (MMS) ..........  28Memory full ..........................................  30Folders ....................................................  30Flash messages ....................................  31Nokia Xpress audio messaging........  31Instant messaging (IM) .....................  32E-mail application ..............................  37Voice messages....................................  39Info messages ......................................  39Service commands..............................  40Delete messages..................................  40Message settings.................................  407. Contacts.............................. 44Search for a contact ..........................  44Save names and phone numbers....  44Save details...........................................  44Copy contacts ......................................  45Edit contact details ............................  45Delete contacts....................................  45My presence .........................................  46Subscribed names ...............................  47Business cards......................................  48Settings..................................................  48Groups....................................................  49Speed dials............................................  49Info, service, and my numbers ........  498. Call log................................  50Positioning information....................  509.  Settings .............................  51Profiles ...................................................  51Themes ...................................................  51Tones.......................................................  51Display....................................................  52Time and date ......................................  53My shortcuts ........................................  53Connectivity .........................................  55Call ..........................................................  59Phone......................................................  60Enhancements .....................................  61
5Configuration........................................ 62Security .................................................. 62Restore factory settings..................... 6310.Operator menu..................  6411.Gallery ...............................  6412.Media ................................  65Camera ................................................... 65Media player......................................... 66Radio ....................................................... 67Voice recorder....................................... 69Stereo widening................................... 6913.Organizer........................... 70Alarm clock............................................ 70Calendar................................................. 70To-do list................................................ 71Notes....................................................... 72Countdown timer ................................ 72Stopwatch ............................................. 7214.Applications ......................  74Launch a game..................................... 74Launch an application........................ 74Some application options ................. 74Download an application .................. 7415.Web ...................................  76Set up browsing................................... 76Connect to a service........................... 76Browse pages........................................ 77Bookmarks............................................. 78Appearance settings ........................... 78Security settings .................................. 79Download settings .............................. 80Service inbox ........................................ 80Cache memory...................................... 81Browser security .................................. 8116.SIM services....................... 8317.PC connectivity ................. 84Nokia PC Suite...................................... 84EGPRS, HSCSD, and CSD.................... 84Data communication applications . 8418.Battery information.......... 85Charging and discharging ................. 85Nokia battery authentication guidelines............................................... 8619.Technical Information ...... 88Care and maintenance ........... 89Additional safety information 90APPENDIX ............................... 94A message from the CTIA........... 94Message from the FDA................ 97
For your safety6For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless phones may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDo not use the phone at a refuelling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the phone where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.
For your safety7WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACK-UP COPIESRemember to make back-up copies or keep a written record of all important information stored in your phone.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless device described in this guide is approved for use on the EGSM 900 and GSM 1800 and 1900 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect the privacy and legitimate rights of others.When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.■Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your
For your safety8device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as multimedia messaging (MMS), browsing, e-mail application, instant messaging, presence enhanced contacts, remote synchronization, and content downloading using the browser or MMS, require network support for these technologies.■Shared memoryThe following features in this device may share memory: gallery, contacts, text messages, multimedia messages, and instant messages, e-mail, calendar, to-do notes, JavaTM games and applications, and note application. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many Java applications may use all of the available memory. Your device may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as text messages, may have a certain amount of memory specially allotted to them in addition to the memory shared with other features. ■EnhancementsA few practical rules about accessories and enhancements• Keep all accessories and enhancements out of the reach of small children.• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.• Installation of any complex car enhancements must be made by qualified personnel only.
General information9General information■Overview of functionsYour phone provides many functions that are practical for daily use, such as a text and multimedia messaging, a calendar, a clock, an alarm clock, a radio, and a built-in camera. Your phone also supports the following functions:• Plug and play online service to get the configuration settings. See “Plug and play service,”p. 14, and “Configuration,” p. 62.• Active standby. See “Active standby,” p. 17.• Audio messaging. See “Nokia Xpress audio messaging,” p. 31.• Instant messaging. See “Instant messaging (IM),” p. 32.• E-mail application. See “E-mail application,” p. 37.• Enhanced voice dialing. See “Enhanced voice dialing,” p. 20 and “Voice commands,” p. 54.• Presence-enhanced contacts. See “My presence,” p. 46.• Java 2 Platform, Micro Edition (J2METM). See “Applications,” p. 74.■Access codesSecurity codeThe security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset code is 12345. To change the code, and to set the phone to request the code, see “Security,” p. 62.PIN codesThe personal identification number (PIN) code and the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use. See “Security,” p. 62.The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some functions.
General information10The module PIN is required to access the information in the security module. See “Security module,” p. 81.The signing PIN is required for the digital signature. See “Digital signature,” p. 82.PUK codesThe personal unblocking key (PUK) code and the universal personal unblocking key (UPUK) code (8 digits) is required to change a blocked PIN code and UPIN code, respectively. The PUK2 code (8 digits) is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact your local service provider for the codes.Barring passwordThe barring password (4 digits) is required when using the Call barring service. See “Security,” p. 62.■Configuration settings serviceTo use some of the network services, such as mobile Internet services, MMS, Nokia Xpress audio messaging, or remote Internet server synchronization, your phone needs the correct configuration settings. You may be able to receive the settings directly as a configuration message. After receiving the settings you need to save them on your phone. The service provider may provide a PIN that is needed to save the settings. For more information on availability, contact your network operator, service provider, nearest authorized Nokia dealer, or visit the support area on the Nokia Web site, www.nokia.com/support.When you have received the settings as a configuration message, and the settings are not automatically saved and activated, Configuration settings received is displayed.To save the settings, select Show > Save. If the phone requests Enter settings' PIN:, enter the PIN code for the settings, and select OK. To receive the PIN code, contact the service provider that supplies the settings. If no settings are saved yet, these settings are saved and set as default configuration settings. Otherwise, the phone asks Activate saved configuration settings?.To discard the received settings, select Exit or Show > Discard.
General information11■Download content and applicationsYou may be able to download new content (for example, themes) to the phone (network service). Select the download function (for example, in the Gallery menu). To access the download function, see the respective menu descriptions. For the availability of different services, pricing, and tariffs, contact your service provider.Important: Use only services that you trust and that offer adequate security and protection against harmful software.■Nokia support and contact informationCheck www.nokia.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia Care contact centers at www.nokia.com/customerservice.For maintenance services, check your nearest Nokia Care services location at www.nokia.com/repair.
Get started121. Get started■Install SIM card and batteryAlways switch the device off and disconnect the charger before removing the battery.Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.This device is intended for use with BL-4B battery.The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.To remove the back cover of the phone, press and slide the cover (1).Remove the battery as shown (2). Slide (3) and open (4) the SIM card holder.Insert the SIM card properly into the holder (5). Close the SIM card holder (6) and slide the holder to lock it (7).
Get started13Replace the battery (8). Observe the battery contacts. Always use original Nokia batteries. See “Nokia battery authentication guidelines,” p. 86. Slide the back cover into its place (9, 10).■Charge the batteryCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from an AC-3.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.1. Connect the charger to a wall socket.2. Connect the lead from the charger to the socket on the bottom of your phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.The charging time depends on the charger used. Charging a BL-4B battery with the AC-3 charger takes approximately 2 hours and 20 minutes while the phone is in the standby mode.
Get started14■Open and close the phoneTo open the phone rotate the upper part to the right (1) or to the left until it snaps into place. To close the phone, rotate the upper part down in the opposite direction (2).Important: When you open the phone, rotate the upper part 180 degrees to the left or right. Do not rotate the upper part more than 180 degrees. If you force the upper part more than 180 degrees in either direction, the phone will be damaged.To switch off a tone that sounds when you open and close the phone, see “Tones,” p. 51.■Switch the phone on and offWarning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Press and hold the power key. See “Keys and parts,” p. 16.If the phone asks for a PIN or a UPIN code, enter the code (displayed as ****), and select OK.Plug and play serviceWhen you switch on your phone for the first time, and the phone is in the standby mode, you are asked to get the configuration settings from your service provider (network service). Confirm or decline the query. See "Connect to serv. support," p. 62, and “Configuration settings service,” p. 10.
Get started15■AntennaYour device has an internal antenna.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the device optimizes the antenna performance and the battery life.■Phone strapThread the strap through the eyelet of the phone as shown in the picture and tighten it.
Your phone162. Your phone■Keys and parts1Earpiece2Twin stereo speakers3Left selection key4Middle selection key5Right selection key6Volume key and zoom key74-way navigation key8Call key9End key10 Keypad11 Microphone12 Phone strap eyelet13 Charger connector14 Pop-PortTM connector15 Camera lens16 Power key17 Camera key
Your phone17■Standby modeWhen the phone is ready for use, and you have not entered any characters, the phone is in the standby mode.Display1Signal strength of the cellular network2Battery charge status3Indicators4Name of the network or the operator logo5Clock6Main screen7Left selection key is Go to or a shortcut toanother function. See “Left selection key,”p. 53.8Middle selection key is Menu9Right selection key is Names or a shortcut to another function. See“Right selection key,” p. 54. Operator variants may have an operator-specific name to access an operator-specific Web site.Active standbyIn active standby mode you will have a list of selected phone features and information on the screen that you can directly access in the standby mode. To switch on the mode, select Menu > Settings > Display > Standby mode settings >Active standby > My active standby. In standby mode, scroll up or down to activate the navigation in the list. To start the feature, select Select or to display the information, select View. Left and right arrows at the beginning and end of a line indicate that further information is available by scrolling left or right. To end the active standby navigation mode, press Exit.To organize and change the active standby mode, activate the navigation mode and select Options > Active standby > My active standby > Options and the following options:
Your phone18Personalise — to assign or change phone features in the standby modeOrganise — to move the position of features in the standby modeEnabling active standby — select keys to activate the standby navigation mode. To change the settings, see “Enabling active standby,” p. 54.To switch off the active standby mode select Options > Active standby > Off or Menu > Settings > Display > Standby mode settings >Active standby > Off.Shortcuts in the standby mode• To access the list of dialed numbers, press the call key once. Scroll to the number or name that you want; and to call the number, press the call key.• To open the web browser, press and hold 0.• To call your voice mailbox, press and hold 1.• Use the navigation key as a shortcut. See “My shortcuts,” p. 53.IndicatorsYou have unread messages in the Inbox folder.You have unsent, canceled or failed messages in the Outbox folder.The phone registered a missed call. /  Your phone is connected to the instant messaging service, and the availability status is online/offline.You received one or several instant messages, and you are connected to the instant messaging service.The keypad is locked.The phone does not ring for an incoming call or text message. The alarm clock is set to On.The countdown timer is running.
Your phone19The stopwatch is running in the background. /  The phone is registered to the GPRS or EGPRS network. /  A GPRS or EGPRS connection is established. /  The GPRS or EGPRS connection is suspended (on hold), for example, if there is an incoming or outgoing call during an EGPRS dial-up connection.A Bluetooth connection is active.If you have two phone lines, the second phone line is selected.All incoming calls are diverted to another number.The loudspeakers are activated, or the music stand is connected to the phone.Calls are limited to a closed user group.The timed profile is selected., ,  , or A headset, hands-free, loopset, or music stand enhancement is connected to the phone.■Keypad lock (keyguard)To prevent the keys from being accidentally pressed, select Menu, and press * within 3.5 seconds to lock the keypad.To unlock the keypad, select Unlock, and press * within 1.5 seconds. If the Security keyguard is set On, enter the security code if requested.To answer a call when the keyguard is on, press the call key. When you end or reject the call, the keypad automatically locks.For Automatic keyguard and Security keyguard, see “Phone,” p. 60.When the keyguard is on, calls still may be possible to the official emergency number programmed into your device.
Call functions203. Call functions■Make a call1. Enter the phone number, including the area code.For international calls, press * twice for the international prefix (the + character replaces the international access code), enter the country code, the area code without the leading 0, if necessary, and the phone number.2. To call the number, press the call key.3. To end the call or to cancel the call attempt, press the end key, or close the phone.To search for a name or phone number that you have saved in Contacts, see “Search for a contact,” p. 44. Press the call key to call the number.To access the list of dialled numbers, press the call key once in the standby mode. To call the number, select a number or name, and press the call key.Speed dialingAssign a phone number to one of the speed-dialing keys, 2 to 9. See “Speed dials,” p. 49. Call the number in either of the following ways:• Press a speed-dialing key, then the call key.•If Speed dialling is set to On, press and hold a speed-dialing key until the call begins. See Speed dialling in “Call,” p. 59.Enhanced voice dialingYou can make a phone call by saying the name that is saved in the contact list of the phone. A voice command is added automatically to all entries in the contact list of the phone.If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing.
Call functions21Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 60.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.1. In the standby mode, press and hold the right selection key. A short tone is played, and Speak now is displayed.If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.2. Say the voice command clearly. If the voice recognition was successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in “My shortcuts,” p. 53.■Answer or reject a callTo answer an incoming call, press the call key, or open the phone. To end the call, press the end key, or close the phone.To reject an incoming call if the phone is open, press the end key or close the phone. To reject an incoming call when the phone is closed, press the power key.To mute the ringing tone, press the volume key, or select Silence.Tip: If the Divert if busy function is activated to divert the calls (for example, to your voice mailbox), rejecting an incoming call also diverts the call. See “Call,” p. 59.If a compatible headset supplied with the headset key is connected to the phone, to answer and end a call, press the headset key.
Call functions22Call waitingTo answer the waiting call during an active call, press the call key. The first call is put on hold. To end the active call, press the end key.To activate the Call waiting function, see “Call,” p. 59.■Options during a callMany of the options that you can use during a call are network services. For availability, contact your network operator or service provider.During a call, select Options and from the following options:Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Loudspeaker or Handset.Network services options are Answer and Reject, Hold or Unhold, New call, Add to conference, End call, End all calls, and the following:Send DTMF — to send tone stringsSwap — to switch between the active call and the call on holdTransfer — to connect a call on hold to an active call and disconnect yourselfConference — to make a conference call that allows up to five persons to take part in a conference callPrivate call —to discuss privately in a conference callWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
Write text234. Write textYou can enter text (for example, when writing messages) using traditional or predictive text input. When you write text, text input indicators appear at the top of the display.   indicates traditional text input.   indicates predictive text input. Predictive text input allows you to write text quickly using the phone keypad and a built-in dictionary. You can enter a letter with a single keypress.   indicates predictive text input with Word suggestions. The phone predicts and completes the word before you enter all the characters.,  , or   appears next to the text input indicator, indicating the character case. To change the character case, press #. indicates number mode. To change from the letter to number mode, press and hold #, and select Number mode.To set the writing language while writing text, select Options > Writing language.■Predictive text inputTo set predictive text input on, select Options > Prediction settings > Prediction > On.Tip: To quickly set predictive text input on or off when writing text, press # twice, or select and hold Options.To select the prediction input type, select Options > Prediction settings > Prediction type > Normal or Word suggestions.1. Start writing a word using the 2 to 9 keys. Press each key only once for one letter. The phone displays * or the letter if it separately has a meaning as a word. The entered letters are displayed underlined.If you selected Word suggestions as prediction type, the phone starts to predict the word you are writing. After you enter a few letters, and if these entered letters are not a word, the phone tries to predict longer words. Only the entered letters are displayed underlined.
Write text24To insert a special character, press and hold *, or select Options > Insert symbol. Scroll to a character, and select Use.To write compounds words, enter the first part of the word and confirm it by pressing the navigation key right. Write the next part of the word and confirm the word.To enter a full stop, press 1.2. When you finish writing the word and it is correct, to confirm it, press 0 to add space.If the word is not correct, press * repeatedly, or select Options > Matches. When the word that you want appears, select Use.If the ? character is displayed after the word, the word you intended to write is not in the dictionary. To add the word to the dictionary, select Spell. Complete the word (traditional text input is used), and select Save.■Traditional text inputTo set traditional text input on, select Options > Prediction settings >Prediction > Off.Press a number key, 1 to 9, repeatedly until the desired character appears. Not all characters available under a number key are printed on the key. The characters available depend on the selected writing language.If the next letter you want is located on the same key as the present one, wait until the cursor appears, or briefly press any of the navigation keys and enter the letter.The most common punctuation marks and special characters are available under the 1 key. For more characters, press *.
Navigate the menus255. Navigate the menusThe phone offers you an extensive range of functions, which are grouped into menus.1. To access the menu, select Menu.To change the menu view, select Options > Main menu view > List, Grid, Grid with labels, or Tab.To rearrange the menu, scroll to the menu you want to move, and select Options > Organise > Move. Scroll to where you want to move the menu, and select OK. To save the change, select Done > Yes.2. Scroll through the menu, and select an option (for example, Settings).3. If the selected menu contains further submenus, select the one that you want (for example, Call).4. If the selected menu contains further submenus, repeat step 3.5. Select the setting of your choice.6. To return to the previous menu level, select Back. To exit the menu, select Exit.
Messaging266. MessagingYou can read, write, send, and save text, multimedia, e-mail, audio, and flash messages. All messages are organized into folders.■Text messages (SMS)With the short message service (SMS) you can send and receive text messages, and receive messages that can contain pictures (network service).Before you can send any text or SMS e-mail message, you must save your message center number. See “Message settings,” p. 40.To check SMS e-mail service availability and to subscribe to the service, contact your service provider. To save an e-mail address in Contacts, see “Save details,” p. 44.Your device supports the sending of text messages beyond the character limit for a single message. Longer messages will be sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message. The message length indicator at the top of the display shows the total number of characters left and the number of messages needed for sending. For example, 673/2 means that there are 673 characters left and that the message will be sent as a series of two messages.Write and send a SMS message1. Select Menu > Messaging > Create message > Text message.2. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used.
Messaging273. Scroll down, and write your message in the Message: field. See “Write text,” p. 23.To insert a template into the message, select Options > Use template.To see how the message will look to the recipient, select Options > Preview.4. To send the message, select Send. See “Message sending,” p. 29.Read and reply to an SMS messageWhen you have received a message, 1 message received or the number of new messages with messages received are shown.1. To view a new message, select Show. To view it later, select Exit.To read the message later, select Menu > Messaging > Inbox. If more than one message is received, select the message you want to read.  is shown if you have unread messages in Inbox.2. To view the list of available options while reading a message, select Options. You can, for example, select the phone to copy text from the beginning of a message to your phone calendar as a reminder note.3. To reply to a message, select Reply > Text message, Multimedia, Flash message, or Audio message.To send a text message to an e-mail address, enter the e-mail address in the To: field.Scroll down, and write your message in the Message: field. See “Write text,” p. 23.If you want to change the message type for your reply message, select Options > Change message type.4. To send the message, select Send.■SIM messagesSIM messages are text messages that are saved to your SIM card. You can copy or move those messages to the phone memory, but not vice versa. Received messages are saved to the phone memory.To read SIM messages, select Menu > Messaging > Options > SIM messages.
Messaging28■Multimedia messages (MMS)Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.To check availability and to subscribe to the multimedia messaging network service, contact your service provider. See “Multimedia messages,” p. 41.A multimedia message can contain text, sound, pictures, video clips, a business card, and a calendar note. If the message is too large, the phone may not be able to receive it. Some networks allow text messages that include an Internet address where you can view the multimedia message.You cannot receive multimedia messages during a call or an active browsing session over GSM data. Because delivery of multimedia messages can fail for various reasons, do not rely solely upon them for essential communications.Write and send a MMS messageThe wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.1. Select Menu > Messaging > Create message > Multimedia.2. Enter your message.Your phone supports multimedia messages that contain several pages (slides). A message can contain a calendar note and a business card as attachments. A slide can contain text, one image, and one sound clip; or text and a video clip. To insert a slide in the message, select New; or select Options > Insert > Slide.To insert a file in the message, select Insert; or Options > Insert.3. To view the message before sending it, select Options > Preview.4. To send the message, select Send. See “Message sending,” p. 29.5. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one.
Messaging29To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used.Message sendingCopyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.When you finish writing your message, to send the message, select Send. The phone saves the message in the Outbox folder, and the sending starts. If you select Save sent messages > Yes, the sent message is saved in the Sent items folder. See “General settings,” p. 40.Note: When the phone is sending the message, the animated   is shown. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.It takes more time to send a multimedia message than to send a text message. While the message is being sent, you can use other functions on the phone. If an interruption occurs while the message is being sent, the phone tries to resend the message a few times. If these attempts fail, the message remains in the Outbox folder. You can try to resend it later.Cancel message sendingTo cancel the sending of the messages in the Outbox folder, scroll to the desired message, and select Options > Cancel sending.Read and reply to a MMS messageImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC. When you receive a new multimedia message, Multimedia message received or the number of new messages with messages received is shown.1. To read the message, select Show. To view it later, select Exit.
Messaging30To read the message later, select Menu > Messaging > Inbox. Scroll to the message that you want to view, and select it.   is shown if you have unread messages in Inbox.2. To view the whole message if the received message contains a presentation, select Play.To view the files in the presentation or the attachments, select Options > Objects or Attachments.3. To reply to the message, select Options > Reply > Text message, Multimedia, Flash message, or Audio message. Write the reply message.If you want to change the message type for your reply message, select Options > Change message type. The new message type may not support all the content that you have added.4. To send the message, select Send. See “Message sending,” p. 29.■Memory fullWhen you receive a message, and the memory for the messages is full, Memory full. Unable to receive messages. is shown. To first delete old messages, select OK > Yes and the folder. Scroll to the desired message, and select Delete. If one or more messages are marked, select Mark. Mark all the messages you want to delete, and select Options > Delete marked.■FoldersThe phone saves received messages in the Inbox folder.Messages that have not yet been sent are saved in the Outbox folder.To set the phone to save the sent messages in the Sent items folder, see Save sent messages in “General settings,” p. 40.To save the message that you write and want to send later in the Drafts folder, select Menu > Messaging > Drafts.You can move your messages to the Saved items folder. To organize your Saved items subfolders, select Menu > Messaging > Saved items. To add a folder, select Options > Add folder. To delete or rename a folder, scroll
Messaging31to the desired folder, and select Options > Delete folder or Rename folder.Your phone has templates. To create a new template, save a message as a template. To access the template list, select Menu > Messaging > Saved items > Templates.■Flash messagesFlash messages are text messages that are instantly displayed upon reception. Flash messages are not automatically saved.Write a flash messageSelect Menu > Messaging > Create message > Flash message. Write your message. The maximum length of a flash message is 70 characters. To insert a blinking text into the message, select Options > Insert blink character to set a marker. The text behind the marker blinks until a second marker is inserted.Receive a flash messageA received flash message is indicated with the text Message: and a few words from the beginning of the message. To read the message, select Read. To extract phone numbers, e-mail addresses, and Web site addresses from the current message, select Options > Use detail. To save the message, select Save and the folder in which you want to save it.■Nokia Xpress audio messagingYou can use the multimedia message service to create and send a audio message in a convenient way. Multimedia messaging service must be activated before you can use audio messages.Create an audio message1. Select Menu > Messaging > Create message > Audio message. The recorder opens. To use the recorder, see “Voice recorder,” p. 69.2. Speak your message.
Messaging323. Enter the recipient’s phone number in the To: field. To retrieve a phone number from Contacts, select Add > Contact. To send the message to multiple recipients, add the desired contacts one by one. To send the message to persons in a group, select Contact group and the desired group. To retrieve the contacts to which you recently sent messages, select Add > Recently used.4. To send the message, select Send.Receive an audio messageWhen your phone receives an audio message, 1 audio message received is displayed. To open the message, select Play; or if more than one message is received, select Show > Play. To listen to the message later, select Exit. To see the available options, select Options. ■Instant messaging (IM)Instant messaging (network service) is a way to send short, simple text messages to online users, delivered over TCP/IP protocols. Before you can use instant messaging, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive your unique ID, password, and settings.To set the required settings for the instant messaging service, see Connection settings in “Access the IM menu,” p. 32. The icons and texts on the display may vary, depending on the instant messaging service.While you are connected to the instant messaging service, you can use the other functions of the phone, and the instant messaging conversation remains active in the background. Depending on the network, the active instant messaging conversation may consume the phone battery faster, and you may need to connect the phone to a charger.Access the IM menuTo access the Instant messages menu while still offline, select Menu > Messaging > Instant messages. If more than one set of connection
Messaging33settings for instant messaging service is available, select the desired one. If there is only one set defined, it is selected automatically.The following options are shown:Login — to connect to the instant messaging service. To set the phone to automatically connect to the instant messaging service when you switch the phone on, select Menu > Messaging > Instant messages, connect to the instant messaging service, and select My settings > Automatic login > On phone start-up.Saved conversations — to view, erase, or rename the conversations that you saved during an instant messaging sessionConnection settings — to edit the settings needed for messaging and presence connectionConnect to the IM serviceTo connect to the instant messaging service, access the Instant messages menu, and select the desired instant messaging service if needed and Login. When the phone has successfully connected, Logged in is displayed.To disconnect from the instant messaging service, select Logout.Start an IM sessionOpen the Instant messages menu, and connect to the service. Start the service in different ways:•Select Conversations to view the list of new and read instant messages or invitations for instant messaging during the active conversation. Scroll to a message or an invitation, and select Open. indicates new and   read instant messages. indicates new and   read group messages. indicates invitations.The icons and texts on the display may vary, depending on the instant messaging service.
Messaging34• Select IM contacts to view the contacts that you have added. Scroll to the contact with whom you would like to chat, and select Chat, or if   is shown next to a contact, select Open. indicates an online contact and   an offline contact in the contact memory of the phone. indicates a blocked contact. See “Block and unblock messages,” p. 36. indicates that you have received a new message from a contact.You can add contacts to the list. See “Contacts for IM,” p. 36.• Select Groups > Public groups (dimmed if groups are not supported by the network) to view the list of bookmarks to public groups provided by the network operator or service provider. To start a conversation, scroll to a group, and select Join. Enter the screen name that you want to use as a nickname in the conversation. When you have successfully joined the group conversation, you can start a group conversation. You can also create a private group. See “Groups,” p. 36.• Select Search > Users or Groups to search for other instant messaging users or public groups on the network by phone number, screen name, e-mail address, or name. If you select Groups, you can search for a group by a member in the group or by group name, topic, or ID.To start the conversation when you have found the user or the group that you want, select Options > Chat or Join group.• Start a conversation from Contacts. See “View the subscribed names,” p. 47.Accept or reject an invitationIn the standby mode, when you are connected to the instant messaging service and you receive a new invitation, New invitation received is displayed. To read it, select Read. If more than one invitation is received, scroll to an invitation, and select Open.
Messaging35To join the private group conversation, select Accept. Enter the screen name that you want to use as a nickname in the conversation.To reject or delete the invitation, select Options > Reject or Delete. You can write an explanation for the rejection.Read a received instant messageIn the standby mode, when you are connected to the instant messaging service and you receive a new message that is not a message associated with an active conversation, New instant message is displayed. To read it, select Read.If more than one message is received, the number of messages, followed by new instant messages, is displayed. Select Read, scroll to a message, and select Open.New messages received during an active conversation are held in Instant messages > Conversations. If you receive a message from someone who is not in IM contacts, the sender ID is displayed. If the sender is in the phone memory and the phone recognizes it, the name of the person is displayed. To save a new contact that is not in the phone memory, select Options > Save contact.Participate in a conversationTo join or start a conversation, select Write or start writing.Write your message. To send it, select Send, or press the call key. The message stays on the display, and the reply message appears below your message.Edit your availability status1. Open the Instant messages menu, and connect to the instant messaging service.2. To view and edit your own availability information or screen name, select My settings.3. To allow all the other instant messaging users to see when you are online, select Availability > Available for all.
Messaging36To allow only the contacts on your instant messaging contact list to see when you are online, select Availability > Available for contacts.To appear as being offline, select Availability > Appear offline.When you are connected to the instant messaging service,   indicates that you are online and   that you are not visible to others.Contacts for IMTo add contacts to the instant messaging contacts list, connect to the instant messaging service, and select IM contacts. To add a contact to the list, select Options > Add contact or Add (if you have no contacts added) > Enter ID manually, Search from server, Copy from server, or By mobile number. Scroll to a contact. To start a conversation, select Chat or Options and from the available options.Block and unblock messagesTo block messages, connect to the instant messaging service, and select Conversations > IM contacts, or join or start a conversation. Scroll to the contact from whom you want to block incoming messages, and select Options > Block contact > OK.To unblock messages, connect to the instant messaging service, and select Blocked list. Scroll to the contact from whom you want to unblock the messages, and select Unblock.GroupsYou can create your own private groups for an instant messaging conversation, or use the public groups provided by the service provider. The private groups exist only during an instant messaging conversation. The groups are saved on the server of the service provider. If the server you are logged into does not support group services, all group-related menus are dimmed.Public groups
Messaging37You can bookmark public groups that your service provider may maintain. Connect to the instant messaging service, and select Groups > Public groups. Scroll to a group with which you want to chat, and select Join. If you are not in the group, write your screen name as your nickname for the group. To delete a group from your group list, select Options > Delete group.To search for a group, select Groups > Search groups. You can search for a group by a member in the group or by group name, topic, or ID.Create a private groupConnect to the instant messaging service, and select Groups > Create group. Enter the name for the group and the screen name that you want to use. Mark the private group members in the contacts list, and write an invitation.■E-mail applicationThe e-mail application uses EGPRS (network service) to allow you to access your e-mail account from your phone when you are not in the office or at home. This e-mail application is different from the SMS e-mail function. To use the e-mail function on your phone, you need a compatible e-mail system.Your phone supports POP3, IMAP4, and SMTP e-mail servers. Before you can send and retrieve any e-mail, you may need to do the following: • Obtain a new e-mail account or use your current account. For availability of your e-mail account, contact your e-mail service provider. • For the settings required for e-mail, contact your e-mail service provider. You may receive the e-mail configuration settings as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 62.To activate the e-mail settings, select Menu > Messaging > Message settings > E-mail messages. See “E-mail messages,” p. 42.This application does not support keypad tones.
Messaging38Write and send an e-mail1. Select Menu > Messaging > E-mail > Create e-mail.2. Enter the recipient’s e-mail address, a subject, and the e-mail message.To attach a file to the e-mail, select Options > Attach and the file in Gallery.3. Select Send > Send now.Download e-mail1. To access the e-mail application, select Menu > Messaging > E-mail.2. To download e-mail messages that have been sent to your e-mail account, select Retrieve.To download new e-mail messages and to send e-mail that has been saved in the Outbox folder, select Options > Retrieve and send.To first download the headings of the new e-mail messages that have been sent to your e-mail account, select Options > Check new e-mail. Then, to download the selected e-mail, mark the desired ones, and select Options > Retrieve.3. Select the new message in Inbox. To view it later, select Back.  indicates an unread message.Read and reply to e-mail Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.1. Select Menu > Messaging > E-mail > Inbox and the desired message.2. To reply to an e-mail, select Reply > Empty screen or Original text. To reply to many, select Options > Reply to all. Confirm or edit the e-mail address and subject; then write your reply.3. To send the message, select Send > Send now.
Messaging39Inbox and Other foldersYour phone saves e-mail that you have downloaded from your e-mail account in the Inbox folder. Other folders contains the following folders: Drafts for saving unfinished e-mail, Archive for organizing and saving your e-mail, Outbox for saving e-mail that has not been sent, and Sent items for saving e-mail that has been sent.To manage the folders and their e-mail content, select Options > Manage folder.Delete e-mail messagesSelect Menu > Messaging > E-mail > Options > Manage folder and the desired folder. Mark the messages that you want to delete, and select Options > Delete.Deleting an e-mail from your phone does not delete it from the e-mail server. To set the phone to delete the e-mail also from the e-mail server, select Menu > Messaging > E-mail > Options > Extra settings > Leave copy > Delete retr. msgs.■Voice messagesThe voice mailbox is a network service and you may need to subscribe to it. For more information and for your voice mailbox number, contact your service provider.To call your voice mailbox, select Menu > Messaging > Voice messages > Listen to voice messages. To enter, search for, or edit your voice mailbox number, select Voice mailbox number.If supported by the network,   indicates new voice messages. To call your voice mailbox number, select Listen.■Info messagesWith the Info messages network service, you can receive messages on various topics from your service provider. To check availability, topics, and the relevant topic numbers, contact your service provider.
Messaging40■Service commandsSelect Menu > Messaging > Service commands. Write and send service requests (also known as USSD commands), such as activation commands for network services, to your service provider.■Delete messagesTo delete messages, select Menu > Messaging > Delete messages > By message to delete single messages, By folder to delete all messages from a folder, or All messages. If a folder contains unread messages, the phone asks whether you want to delete them also.■Message settingsGeneral settingsGeneral settings are common for text and multimedia messages.Select Menu > Messaging > Message settings > General settings and from the following options:Save sent messages > Yes — to set the phone to save the sent messages in the Sent items folderOverwriting in Sent items > Allowed — to set the phone to overwrite the old sent messages with the new ones when the message memory is full. This setting is shown only if you set Save sent messages > Yes.Font size — to select the font size used in messagesGraphical smileys > Yes — to set the phone to replace character-based smileys with graphical onesText messagesThe text message settings affect the sending, receiving, and viewing of text and SMS e-mail messages.Select Menu > Messaging > Message settings > Text messages and from the following options:
Messaging41Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)Message centres > Add centre — to set the phone number and name of the message center that is required for sending text messages. You receive this number from your service provider.Message centre in use — to select the message center in useE-mail message centres > Add centre — to set the phone numbers and name of the e-mail center for sending SMS e-mails.E-mail centre in use — to select the SMS e-mail message center in useMessage validity — to select the length of time for which the network attempts to deliver your messageMessages sent via — to select the format of the messages to be sent: Text, Paging, or Fax (network service)Use packet data > Yes — to set GPRS as the preferred SMS bearerCharacter support > Full — to select all characters in the messages to be sent as viewed. If you select Reduced, characters with accents and other marks may be converted to other characters. When writing a message, you can check how the message will look to the recipient by previewing the message. See “Write and send a SMS message,” p. 26.Reply via same centre > Yes — to allow the recipient of your message to send you a reply using your message center (network service)Multimedia messagesThe message settings affect the sending, receiving, and viewing of multimedia messages.You may receive the configuration settings for multimedia messaging as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 62.Select Menu > Messaging > Message settings > Multimedia messages and from the following options:Delivery reports > Yes — to ask the network to send delivery reports about your messages (network service)
Messaging42Default slide timing — to define the default time between slides in multimedia messagesAllow multimedia recept. — to receive or block the multimedia message, select Yes or No. If you select In home network, you cannot receive multimedia messages when outside your home network. The default setting of the multimedia message service is generally In home network. The availability of this menu depends on your phone.Incoming multim. msgs. — to allow the reception of multimedia messages automatically, manually after being prompted, or to reject the reception. This setting is not shown if Allow multimedia recept. is set to No.Allow adverts — to receive or reject advertisements. This setting is not shown if Allow multimedia recept. is set to No, or Incoming multim. msgs. is set to Reject.Configuration settings > Configuration — only the configurations that support multimedia messaging are shown. Select a service provider, Default, or Personal configuration for multimedia messaging. Select Account and a multimedia messaging service account contained in the active configuration settings.E-mail messagesThe settings affect the sending, receiving, and viewing of e-mail.You may receive the configuration settings for the e-mail application as a configuration message. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 62.To activate the settings for the e-mail application, select Menu > Messaging > Message settings > E-mail messages and from the following options:Configuration — Select the set that you want to activate.Account — Select an account provided by the service provider.My name — Enter your name or nickname.E-mail address — Enter your e-mail address.
Messaging43Include signature — You can define a signature that is automatically added to the end of your e-mail when you write your message.Reply-to address — Enter the e-mail address to which you want the replies to be sent.SMTP user name — Enter the name that you want to use for outgoing mail.SMTP password — Enter the password that you want to use for outgoing mail.Display terminal window — Select Yes to perform manual user authentication for intranet connections.Incoming server type — Select POP3 or IMAP4, depending on the type of e-mail system that you are using. If both types are supported, select IMAP4.Incoming mail settings — Select available options for POP3 or IMAP4.
Contacts447. ContactsYou can save names and phone numbers (contacts) in the phone memory and in the SIM card memory.The phone memory may save contacts with additional details, such as various phone numbers and text items. You can also save an image for a limited number of contacts.The SIM card memory can save names with one phone number attached to them. The contacts saved in the SIM card memory are indicated by .■Search for a contactSelect Menu > Contacts > Names. Scroll through the list of contacts, or enter the first characters of the name you are searching for.■Save names and phone numbersNames and numbers are saved in the used memory. To save a name and phone number, select Menu > Contacts > Names > Options > Add new contact. Enter the last name, first name, and the phone number.■Save detailsIn the phone memory for contacts you can save different types of phone numbers, and short text items per name. You can also select tone or a video clip for a contact.The first number you save is automatically set as the default number, and it is indicated with a frame around the number type indicator (for example,  ). When you select a name from contacts (for example, to make a call), the default number is used unless you select another number.1. Make sure that the memory in use is Phone or Phone and SIM. See “Settings,” p. 48.
Contacts452. Search for the contact to which you want to add a detail, and select Details > Options > Add detail. Select from the options available.To search for an ID from the server of your service provider if you have connected to the presence service, select User ID > Search. See “My presence,” p. 46. If only one ID is found, it is automatically saved. Otherwise, to save the ID, select Options > Save. To enter the ID, select Enter ID manually. Enter the ID, and select OK to save it.■Copy contactsSearch for the contact you want to copy, and select Options > Copy. You can copy names and phone numbers from the phone contact memory to the SIM card memory, or vice versa. The SIM card memory can save names with one phone number attached to them.■Edit contact detailsSearch for the contact you want to edit, and select Details. To edit a name, number, text item, or to change the image, select Options > Edit. To change the number type, scroll to the desired number, and select Options > Change type. To set the selected number as the default number, select Set as default. You cannot edit an ID when it is on the IM contacts or Subscribed names list.■Delete contactsTo delete all the contacts and the details attached to them from the phone or SIM card memory, select Menu > Contacts > Delete all contacts > From phone memory or From SIM card. Confirm with the security code.To delete a contact, search for the desired contact, and select Options > Delete contact.To delete a number, text item, or an image attached to the contact, search for the contact, and select Details. Scroll to the desired detail, and select Options > Delete and from the options available. Deleting an image or video clip from contacts does not delete it from Gallery.
Contacts46■My presenceWith the presence service (network service) you can share your presence status with other users with compatible devices and access to the service, such as your family, friends, and colleagues. Presence status includes your availability, status message, and personal logo. Other users who have access to the service and who request your information are able to see your status. The requested information is shown in Subscribed names in the viewers’ Contacts menu. You can personalize the information that you want to share with others and control who can see your status.Before you can use presence, you must subscribe to the service. To check the availability and costs, and to subscribe to the service, contact your network operator or service provider, from whom you also receive your unique ID, password, and the settings for the service. See “Configuration,” p. 62.While you are connected to the presence service, you can use the other functions of the phone, and the presence service is active in the background. If you disconnect from the service, your presence status is shown for a certain amount of time to viewers, depending on the service provider.Select Menu > Contacts > My presence and from the following options:Connect to 'My presence' or Disconnect from service — to connect to or disconnect from the serviceView my presence > Private presence or Public presence — to view your presence statusEdit my presence > My availability, My presence message, My presence logo, or Show to — to change your presence statusMy viewers > Current viewers, Private list, or Blocked list — to view the persons who are subscribed to or blocked from your presence informationSettings > Show pres. in standby, Connection type, or IM and my presence sett.
Contacts47■Subscribed namesYou can create a list of contacts whose presence status information you want to be aware of. You can view the information if it is allowed by the contacts and the network. To view these subscribed names, scroll through the contacts, or use the Subscribed names menu.Ensure that the memory in use is Phone or Phone and SIM. See “Settings,” page 48.To connect to the presence service, select Menu > Contacts > My presence > Connect to 'My presence'.Add contacts to the subscribed names1. Select Menu > Contacts > Subscribed names. If you have not connected to the presence service, the phone asks if you want to connect now.2. If you have no contacts on your list, select Add. Otherwise, select Options > Subscribe new. Your list of contacts is shown.3. Select a contact from the list. If the contact has a saved ID, the contact is added to the subscribed names list. If there is more than one ID, select one of them. After subscription to the contact, Subscription activated is shown.Tip: To subscribe to a contact from the Contacts list, search for the contact you want, and select Details > Options > Request presence > As subscription.If you only want to view the presence information but not to subscribe to a contact, select Request presence > One time only.View the subscribed namesTo view the presence information, see also “Search for a contact,” p. 44.1. Select Menu > Contacts > Subscribed names.The status information of the first contact on the subscribed names list is displayed. The information that the person wants to make available to others may include text and an icon.
Contacts48,  , or   indicates that the person is available, not visible to others, or not available. indicates that the person’s presence information is not available.2. Select Options > View details to view the details of the selected contact or Options > Subscribe new, Send message, Send business card, or Unsubscribe.Unsubscribe a contactTo unsubscribe a contact from the Contacts list, select the contact and Options > Unsubscribe > OK.To unsubscribe from the Subscribed names menu, see “View the subscribed names,” p. 47.■Business cardsYou can send and receive a person’s contact information from a compatible device that supports the vCard standard as a business card.To send a business card, search for the contact whose information you want to send, and select Details > Options > Send business card > Via multimedia, Via text message, or Via Bluetooth.When you have received a business card, select Show > Save to save the business card in the phone memory. To discard the business card, select Exit > Yes.■SettingsSelect Menu > Contacts > Settings and from the following options:Memory in use — to select the SIM card or phone memory for your contacts. Select Phone and SIM to recall names and number from both memories. In that case, when you save names and numbers, they are saved in the phone memory.Contacts view — to select how the names and numbers in Contacts are displayedName display — to select whether the contact’s first or last name is displayed first
Contacts49Font size — to set the font size for the list of contactsMemory status — to view the free and used memory capacity■GroupsSelect Menu > Contacts > Groups to arrange the names and phone numbers saved in the memory into caller groups with different ringing tones and group images.■Speed dialsTo assign a number to a speed-dialing key, select Menu > Contacts > Speed dials, and scroll to the speed-dialing number that you want.Select Assign, or if a number has already been assigned to the key, select Options > Change. Select Search and the contact you want to assign. If the Speed dialling function is off, the phone asks whether you want to activate it. See also Speed dialling in “Call,” p. 59.To make a call using the speed-dialing keys, see “Speed dialing,” p. 20.■Info, service, and my numbersSelect Menu > Contacts and from one of these submenus:Info numbers — to call the information numbers of your service provider if the numbers are included on your SIM card (network service)Service numbers — to call the service numbers of your service provider if the numbers are included on your SIM card (network service)My numbers — to view the phone numbers assigned to your SIM card, if the numbers are included on your SIM card
Call log508. Call logThe phone registers your missed, received, and dialed calls if the network supports it and the phone is switched on and within the network service area.To view the information on your calls, select Menu > Log > Missed calls, Received calls, or Dialled numbers. To view your recent missed and received calls and the dialed numbers chronologically, select Call log. To view the contacts to whom you most recently sent messages, select Message recipients.To view the approximate information on your recent communications, select Menu > Log > Call duration, Packet data counter, or Packet data timer.To view how many text and multimedia messages you have sent and received, select Menu > Log > Message counter.Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Some timers may be reset during service or software upgrades.■Positioning informationThe network may send you a location request. You can ensure that the network will deliver location information of your phone only if you approve it (network service). Contact your network operator or service provider to subscribe and to agree upon the delivery of location information.To accept or reject the location request, select Accept or Reject. If you miss the request, the phone automatically accepts or rejects it according to what you have agreed with your network operator or service provider. The phone displays 1 missed position request. To view the missed location request, select Show.To view the information on the 10 most recent privacy notifications and requests or to delete them, select Menu > Log > Positioning > Position log > Open folder or Delete all.
Settings519.  Settings■ProfilesYour phone has various setting groups, called profiles, for which you can customize the phone tones for different events and environments.Select Menu > Settings > Profiles, the desired profile and from the following options:Activate — to activate the selected profilePersonalise — to personalize the profile. Select the setting you want to change, and make the changes. Timed — to set the profile to be active until a certain time up to 24 hours, and set the end time. When the time set for the profile expires, the previous profile that was not timed becomes active.■ThemesA theme contains many elements for personalizing your phone, such as wallpaper, screen saver, color scheme, and a ringing tone.Select Menu > Settings > Themes from the following options:Select theme — to set a theme in your phone. A list of folders in Gallery opens. Open the Themes folder, and select a theme.Theme downloads — to open a list of links to download more themes.■TonesYou can change the settings of the selected active profile.Select Menu > Settings > Tones. You can find the same settings in the Profiles menu. See “Profiles,” p. 51.To set the phone to ring only for calls from phone numbers that belong to a selected caller group, select Alert for. Scroll to the caller group you want or All calls, and select Mark. Select Options > Save to save the settings or Cancel to leave the settings unchanged.
Settings52If you select the highest ringing tone level, the ringing tone reaches its highest level after a few seconds.A theme may contain a tone that sounds when you open and close the phone. To switch off the tone, change the setting in Other tones:. Please note that this setting also switches off the warning tones.■DisplayWith display settings you can personalize your phone display view.Standby mode settingsSelect Menu > Settings > Display > Standby mode settings and from the following options:Active standby — to switch the active standby mode on or off and to organize and personalize the active standby mode. See “Active standby,” p. 17.Wallpaper — to add the background image to the display in standby modeSwivel animation — to set your phone to display an animation when you open and close the phoneStandby font colour — to select the color for the texts on the display in the standby modeNavigation key icons > On — to display the icons of the current navigation key shortcuts in the standby mode when active standby is offOperator logo — to set your phone to display or hide the operator logo. The menu is dimmed, if you have not saved the operator logo. For more information on availability of an operator logo, contact your network operator.Cell info display > On — to display the cell identity, if available from the networkScreen saverTo select a screen saver from Gallery, select Menu > Settings > Display > Screen saver > Screen savers > Image, Slide set, Video clip, or
Settings53Open camera. To download more screen savers, select Graphic downloads. To select the time after which the screen saver is activated, select Time-out. To activate the screen saver, select On.Power saverTo save some battery power, select Menu > Settings > Display > Power saver. The date and a digital clock are displayed when no function of the phone is used for a certain time.Font sizeTo set the font size for reading and writing messages, and viewing contacts and web pages, select Menu > Settings > Display > Font size.■Time and dateTo make the time and date settings, select Menu > Settings > Time and date > Clock, Date, or Auto-update of date/time (network service).■My shortcutsWith personal shortcuts you get quick access to often used functions of the phone.Left selection keyTo select a function from the list for the left selection key, select Menu > Settings > My shortcuts > Left selection key. See also “Standby mode,” p. 17.If the left selection key is Go to to activate a function, select Go to and the desired function on your personal shortcut list. Select Options and from the following options:Select options — to add a function to the shortcut list, or to remove one. Scroll to the function, and select Mark or Unmark.Organise — to rearrange the functions on your personal shortcut list. Scroll to the function you want to move, and select Move. Scroll to where you want to move the function, and select OK.
Settings54Right selection keyTo select a function from the list for the right selection key, select Menu > Settings > My shortcuts > Right selection key. See also “Standby mode,” p. 17.Navigation keyTo select shortcut functions for the navigation keys, select Menu > Settings > My shortcuts > Navigation key. Scroll to the desired key, select Change and a function from the list. To remove a shortcut function from the key, select (empty). To reassign a function for the key, select Assign. See “Shortcuts in the standby mode,” p. 18.Enabling active standbyTo select the key to activate the active standby navigation mode, select Menu > Settings > My shortcuts > Enabling active standby > Navigation key up, Navigation key down, or Navigation key up/down.Voice commandsYou can call contacts and carry out phone functions by saying voice commands. Voice commands are language-dependent. To set the language, see Voice playback language in “Phone,” p. 60.To select the phone functions to activate with a voice commands, select Menu > Settings > My shortcuts > Voice commands and a folder. Scroll to a function.   indicates that the voice tag is activated. To activate the voice tag, select Add. To play the activated voice command, select Play. To use voice commands, see “Enhanced voice dialing,” p. 20.To manage the voice commands, scroll to a phone function, and select from the following options:Edit or Remove — to change or deactivate the voice command of the selected functionAdd all or Remove all — to activate or deactivate voice commands to all functions in the voice commands list.
Settings55■ConnectivityYou can connect the phone to a compatible device using a Bluetooth wireless technology or a USB data cable connection. You can also define the settings for EGPRS dial-up connections.Bluetooth wireless technologyThis device is compliant with Bluetooth Specification 2.0 supporting the following profiles: generic access, generic object exchange, hands-free, headset, object push, file transfer, dial-up networking, SIM access, and serial port. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.Bluetooth technology allows you to connect the phone to a compatible Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth technology communicate using radio waves, your phone and the other devices do not need to be in direct line-of-sight, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.Set up a Bluetooth connectionSelect Menu > Settings > Connectivity > Bluetooth and from the following options:Bluetooth > On or Off — to activate or deactivate the Bluetooth function.   indicates an active Bluetooth connection.Search for audio enhanc. — to search for compatible Bluetooth audio devices. Select the device that you want to connect to the phone.Paired devices — to search for any Bluetooth device in range. Select New to list any Bluetooth device in range. Scroll to a device, and select Pair. Enter an agreed Bluetooth passcode of the device (up to 16 characters)
Settings56to associate (pair) the device to your phone. You must only give this passcode when you connect to the device for the first time. Your phone connects to the device, and you can start data transfer.Bluetooth wireless connectionSelect Menu > Settings > Connectivity > Bluetooth. To check which Bluetooth connection is currently active, select Active devices. To view a list of Bluetooth devices that are currently paired with the phone, select Paired devices.Select Options to access available options depending on the status of the device and the Bluetooth connection.Bluetooth settingsTo define how your phone is shown to other Bluetooth devices, select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings > My phone's visibility or My phone's name.If you are concerned about security, turn off the Bluetooth function or set My phone's visibility to Hidden. Always accept only Bluetooth communication from others with whom you agree.Packet data (GPRS)General packet radio service (GPRS) is a network service that allows mobile phones to send and receive data over an Internet protocol (IP)-based network. It enables wireless access to data networks such as the Internet.The applications that may use packet data are MMS, video streaming, browsing sessions, e-mail, remote SyncML, Java application downloading, and the PC dial-up.To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data connection. Select from the following options:When needed — to set the packet data connection to established when an application needs it. The connection will be closed when the application is terminated.
Settings57Always online — to set the phone to automatically connect to a packet data network when you switch the phone on.   or   indicates that the GPRS or EGPRS service is available. If you receive a call or a text message, or make a call during a packet data connection,   or   indicates that the GPRS or EGPRS connection is suspended (on hold).Modem settingsYou can connect the phone using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the phone as a modem to enable EGPRS connectivity from the PC.To define the settings for EGPRS connections from your PC, select Menu > Settings > Connectivity > Packet data > Packet data settings > Active access point, and activate the access point you want to use. Select Edit active access point > Alias for access point, enter a name to change the access point settings, and select OK. Select Packet data access point, enter the access point name (APN) to establish a connection to an EGPRS network, and select OK.You can also set the EGPRS dial-up service settings (access point name) on your PC using the Nokia Modem Options software. See “Nokia PC Suite,” p. 84. If you have set the settings both on your PC and on your phone, the PC settings are used.Data transferSynchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile phone), a compatible PC, or a remote Internet server (network service).Your phone allows data transfer with a compatible PC or another compatible device when using the phone without a SIM card. Note that when you use the phone without a SIM card, some functions appear dimmed in the menus and cannot be used. Synchronizing with a remote Internet server is not possible without a SIM card.Partner listTo copy or synchronize data from your phone, the name of the device and the settings must be in the list of partners in transfer contacts. If
Settings58you receive data from another device (for example, a compatible mobile phone), the partner is automatically added to the list, using the contact data from the other device. Server synchronisation and PC synchronisation are the original items in the list.To add a new partner to the list (for example a new device), select Menu > Settings > Connectivity > Data transfer > Options > Add transfer contact > Phone synchronisation or Phone copy, and enter the settings according to the transfer type.To edit the copy and synchronize settings, select a contact from the partner list and Options > Edit.To delete a partner, select a contact from the partner list and Options > Delete, and confirm Delete transfer contact?. You cannot delete Server synchronisation or PC synchronisation.Data transfer with a compatible deviceFor synchronization, Bluetooth wireless technology or a cable connection is used. The other device is in the standby mode.To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the list, other than Server synchronisation or PC synchronisation. According to the settings, the selected data is copied or synchronized. The other device also must be activated for receiving data.Synchronize from a compatible PCBefore you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology or a USB data cable for the synchronization, and start the synchronization from the PC.Synchronize from a serverTo use a remote Internet server, you must subscribe to a synchronization service. For more information and the settings required for this service, contact your service provider. You may receive the settings as a
Settings59configuration message. See “Configuration settings service,” p. 10 and “Configuration,” p. 62.If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization from your phone.Select Menu > Settings > Connectivity > Data transfer > Server synchronisation. Depending on the settings, select Initialising synchronisation or Initialising copy.Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete, if the contacts or calendar are full.USB data cableYou can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.To activate the phone for data transfer or picture printing, connect the data cable; when the phone displays USB data cable connected. Select mode., select OK. Select from the following modes:Default mode — to use the cable for PC SuitePrinting — to print pictures directly from the phone using a compatible printerTo change the USB mode, select Menu > Settings > Connectivity > USB data cable > Default mode, Printing, or Data storage.■CallSelect Menu > Settings > Call and from the following options:Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in “Security,” p. 62.Anykey answer > On — to answer an incoming call by briefly pressing any key, except the power key, the camera key, the left and right selection keys, or the end key
Settings60Automatic redial > On — to make a maximum of 10 attempts to connect the call after an unsuccessful call attemptSpeed dialling > On — to dial the names and phone numbers assigned to the speed-dialing keys 2 to 9 by pressing and holding the corresponding number keyCall waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See “Call waiting,” p. 22.Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each callSend my caller ID > Yes — to show your phone number to the person you are calling (network service). To use the setting agreed upon with your service provider, select Set by network.Line for outgoing calls — to select the phone line 1 or 2 for making calls if supported by your SIM card (network service).Swivel call handling — to set the phone to answer calls when you open the phone and to end calls when you close the phone■PhoneSelect Menu > Settings > Phone and from the following options: Language settings — to set the display language of your phone, select Phone language. If you select Automatic, the phone selects the language according to the information on the SIM card. To select the USIM card language, select SIM language. To set a language for the voice playback, select Voice playback language. See “Enhanced voice dialing,” p. 20 and Voice commands in “My shortcuts,” p. 53.Security keyguard — to set the phone to ask for the security code when you unlock the keyguard. Enter the security code, and select On.Automatic keyguard — to set the keypad of your phone to lock automatically after a preset time delay when the phone is in the standby mode and no function of the phone has been used. Select On, and set the time.
Settings61When the keyguard is on, calls still may be possible to the official emergency number programmed into your device. Welcome note — to write the note you would like to be shown briefly when the phone is switched onOperator selection > Automatic — to set the phone to automatically select one of the cellular networks available in your area. With Manual you can select a network that has a roaming agreement with your home network operator.Confirm SIM serv. actions — See “SIM services,” p. 83.Help text activation — to select whether the phone shows help textsStart-up tone — to select whether the phone plays a tone when on the phone is switched onSwitch off tone — to select whether the phone plays a tone when the phone is switched off. The availability of this menu depends on your phone.■EnhancementsThis menu or the following options are shown only if the phone is or has been connected to a compatible mobile enhancement.Select Menu > Settings > Enhancements. Depending on the enhancement, select from the following options:Default profile — to select the profile that you want to be automatically activated when you connect to the selected enhancementAutomatic answer — to set the phone to answer an incoming call automatically after 5 seconds. If Incoming call alert is set to Beep once or Off, automatic answer is off.Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 seconds after a key press.Text phone > Use text phone > Yes — to use the text phone settings instead of headset or loopset settings
Settings62■ConfigurationYou can configure your phone with settings that are required for certain services to function correctly. The services are multimedia messaging, instant messaging, synchronization, e-mail application, streaming, and browser. Your service provider may also send you these settings. See “Configuration settings service,” p. 10.Select Menu > Settings > Configuration and from the following options:Default config. settings — to view the service providers saved in the phone. Scroll to a service provider, and select Details to view the applications that the configuration settings of this service provider support. To set the configuration settings of the service provider as default settings, select Options > Set as default. To delete configuration settings, select Delete.Activ. default in all apps. — to activate the default configuration settings for supported applicationsPreferred access point — to view the saved access points. Scroll to an access point, and select Options > Details to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.Connect to serv. support — to download the configuration settings from your service providerPersonal config. settings — to add new personal accounts for various services manually, and to activate or delete them. To add a new personal account if you have not added any, select Add; otherwise, select Options > Add new. Select the service type, and select and enter each of the required parameters. The parameters differ according to the selected service type. To delete or activate a personal account, scroll to it, and select Options > Delete or Activate.■SecurityWhen security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may be possible to the official emergency number programmed into your device.
Settings63Select Menu > Settings > Security and from the following options:PIN code request and UPIN code request — to set the phone to ask for your PIN or UPIN code every time the phone is switched on. Some SIM cards do not allow the code request to be turned off.PIN2 code request — to select whether the PIN2 code is required when using a specific phone feature which is protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off.Call barring service — to restrict incoming calls to and outgoing calls from your phone (network service). A barring password is required.Fixed dialling — to restrict your outgoing calls to selected phone numbers if this function is supported by your SIM cardClosed user group — to specify a group of people whom you can call and who can call you (network service)Security level > Phone — to set the phone to ask for the security code whenever a new SIM card is inserted into the phone. If you select Memory, the phone asks for the security code when the SIM card memory is selected, and you want to change the memory in use.Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or barring passwordCode in use — to select whether the PIN code or UPIN code should be activeAuthority certificates or User certificates — to view the list of the authority or user certificates downloaded into your phone. See “Certificates,” p. 82.Security module settings — to view Security module details, activate Module PIN request, or change the module PIN and signing PIN. See also “Access codes,” p. 9.■Restore factory settingsTo reset some of the menu settings to their original values, select Menu > Settings > Restore factory sett.. Enter the security code. The data you have entered or downloaded, such as names and phone numbers saved in Contacts, are not deleted.
Operator menu6410. Operator menuThis menu lets you access a portal to services provided by your network operator. The name and the icon depend on the operator. For more information contact your network operator. If this menu is not shown the following menu numbers change accordingly.The operator can update this menu with a service message. For more information, see “Service inbox,” p. 80.11. GalleryIn this menu you can manage images, video clips, music files, themes, graphics, tones, recordings, and received files. These files are arranged in folders.Your phone supports an activation key system to protect acquired content. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.To see the list of folders, select Menu > Gallery.To see the available options of a folder, select a folder > Options. To view the list of files in a folder, select a folder > Open. To see the available options of a file, select a file > Options.
Media6512. MediaWhen taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.■CameraYou can take photos or record video clips with the built-in camera. Take a snapshotHold the phone in a horizontal position. To start the camera in the still image mode  , press the camera key (1); or to start in the video mode , press and hold the camera key. Use the volume key (2) to zoom in and out. To take a photo, or to start and pause a video record, press the camera key. To stop the camera, press the power key. The phone saves a photo in Gallery > Images and a video record in Video clips.Take a photoTo start the camera, press the camera key or select Menu > Media > Camera.To use the camera, hold the phone in a horizontal position. Press in this position the navigation key left or right to change between camera (still image) and video mode. In the camera mode to zoom in and out, press the navigation key up and down, or the volume key.
Media66To take a photo select Capture or press the camera key. The phone saves the photo in Gallery > Images. To take another photo, select Back; to send the photo as a multimedia message, select Options > Send.Select Options to set Night mode on if the lighting is dim, Self-timer on to activate the self-timer, Img. sequence on to take photos in a fast sequence. With the highest image size setting 3 photos are taken in a sequence, with other size settings 5 photos are taken.Your device supports an image capture resolution of 1280 x 960 pixels. The image resolution in these materials may appear different.Record a video clipTo select the video mode, scroll left or right in horizontal position, or select Options > Video. To start the video recording, select Record. To pause the recording, select Pause; to resume the recording, select Continue. To stop the recording, select Stop. The phone saves the recording in Gallery > Video clips.Camera filtersTo use a filter with the camera, select Options > Effects >False colours, Greyscale, Sepia, Negative, or Solarise. Camera settingsTo change the camera settings, select Options > Settings. ■Media playerWith the media player you can view, play, and download files, such as images, audio, video, and animated images. You can also view compatible streaming videos from a network server (network service).Select Menu > Media > Media player > Open gallery, Bookmarks, Go to address, or Media downloads.
Media67Configuration for a streaming serviceYou may receive the configuration settings required for streaming as a configuration message from the service provider. See “Configuration settings service,” p. 10. You can also enter the settings manually. See “Configuration,” p. 62.To activate the settings, do the following:1. Select Menu > Media > Media player > Streaming settings.2. Select Configuration. Only the configurations that support streaming are shown. Select a service provider, Default, or Personal configuration for streaming.3. Select Account and a streaming service account contained in the active configuration settings.■RadioThe FM radio depends on an antenna other than the wireless device’s antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Select Menu > Media > Radio.To use the graphical keys  ,  ,  , or   on the display, scroll left or right to the desired key, and select it.Save radio frequencies1. To start the search, select and hold   or  . To change the radio frequency in 0.05 MHz steps, briefly press   or  .2. To save a frequency to a memory location, 1 to 9, press and hold the corresponding number key. To save a frequency to a memory location from 10 to 20, press briefly 1 or 2, and press and hold the desired number key, 0 to 9.3. Enter the name of the radio station.
Media68Listen to the radioSelect Menu > Media > Radio. To scroll to the desired frequency, select  or  , or press the headset key. To select a radio station, briefly press the corresponding number keys. To adjust the volume, press the volume key.Select from the following options:Switch off — to turn off the radioSave station — to save a new radio stationVisual Radio — to set whether the Visual Radio application is used (network service). To check the availability and costs, contact your network operator or service provider. Some radio stations may send text or graphical information that you can view using the Visual Radio application.Visual Radio settings — to select the options for Visual Radio. To set whether the application starts automatically when you turn on the radio, select Enable visual service > Automatically. To access a Web site with a list of radio stations, select Station directory. If available, their visual radio ID is shown.Stations — to select the list of saved stations. To delete or rename a station, scroll to the desired station, and select Options > Delete station or Rename.Mono output or Stereo output — to listen to the radio in monophonic sound or in stereoLoudspeaker or Headset — to listen to the radio using the loudspeakers or headset. Keep the headset connected to the phone. The lead of the headset functions as the radio antenna.Set frequency — to enter the frequency of the desired radio stationYou can normally make a call or answer an incoming call while listening to the radio. During the call, the volume of the radio is muted.When an application using a packet data or HSCSD connection is sending or receiving data, it may interfere with the radio.
Media69■Voice recorderYou can record pieces of speech, sound, or an active call, and save them in Gallery. This is useful when recording a name and phone number to write down later.The recorder cannot be used when a data call or GPRS connection is active.Record sound1. Select Menu > Media > Voice recorder.To use the graphical keys  ,  , or   on the display, scroll left or right to the desired key, and select it.2. To start the recording, select  . To start the recording during a call, select Options > Record. While recording a call, all parties to the call hear a faint beeping sound. When recording a call, hold the phone in the normal position near to your ear. To pause the recording, select .3. To end the recording, select  . The recording is saved in Gallery > Recordings.To listen to the latest recording, select Options > Play last recorded.To send the last recording, select Options > Send last recorded.To see the list of recordings in Gallery, select Options > Recordings list > Recordings.■Stereo wideningStereo widening enhances the phone's audio output by enabling a wider stereo sound effect. To change the setting, select Menu > Media > Stereo widening.
Organizer7013. Organizer■Alarm clockYou can set the phone to alarm at a desired time. Select Menu > Organiser > Alarm clock.To set the alarm, select Alarm time and enter the alarm time. To change the alarm time when the alarm time is set, select On.To set the phone to alert you on selected days of the week, select Repeat alarm.To select the alarm tone or set the radio as the alarm tone, select Alarm tone. If you select the radio as an alarm tone, connect the headset to the phone. The phone uses the last radio station you listened to as the alarm, and the alarm plays through the loudspeakers. If you remove the headset or switch off the phone, the default alarm tone replaces the radio.To set a snooze time-out, select Snooze time-out and the time.Stop the alarmThe phone sounds an alert tone, and flashes Alarm! and the current time on the display, even if the phone was switched off. To stop the alarm, select Stop. If you let the phone continue to sound the alarm for a minute or select Snooze, the alarm stops for the time you set in Snooze time-out, and then resumes.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.■CalendarSelect Menu > Organiser > Calendar. The current day is indicated by a frame. If there are any notes set for the day, the day is in bold type, and the beginning of the note is shown
Organizer71below the calendar. To view the day notes, select View. To view a week, select Options > Week view. To delete all notes in the calendar, select the month or week view, and select Options > Delete all notes.Other options for the day view may be to make a note; delete, edit, move, or repeat a note; copy a note to another day; send a note with Bluetooth technology; or send a note to the calendar of another compatible phone as a text message or multimedia message. In Settings you can set the date, time, time zone, date or time format, date separator, default view, or the first day of the week. In Auto-delete notes you can set the phone to delete old notes automatically after a specified time.Make a calendar noteSelect Menu > Organiser > Calendar. Scroll to the date, and select Options > Make a note and one of the following note types: Meeting,  Call,  Birthday,  Memo, or   Reminder. Fill in the fields.Note alarmThe phone displays the note and if set, sounds a tone. With a call note  on the display, to call the displayed number, press the call key. To stop the alarm and to view the note, select View. To stop the alarm for 10 minutes, select Snooze.To stop the alarm without viewing the note, select Exit.■To-do listTo save a note for a task that you must do, select Menu > Organiser > To-do list.To make a note if no note is added, select Add; otherwise, select Options > Add. Fill in the fields, and select Save.To view a note, scroll to it, and select View. While viewing a note, you can also select an option to edit the attributes.
Organizer72You can also select an option to delete the selected note and delete all the notes that you have marked as done. You can sort the notes by priority or by deadline, send a note to another phone as a text message or a multimedia message, save a note as a calendar note, or access the calendar.■NotesTo write and send notes, select Menu > Organiser > Notes.To make a note if no note is added, select Add; otherwise, select Options > Make a note. Write the note, and select Save.Other options include deleting and editing a note. While editing a note, you can also exit the text editor without saving the changes. You can send the note to compatible devices through Bluetooth wireless technology, text message, or a multimedia message.■Countdown timerSelect Menu > Organiser > Countdown timer. Enter the alarm time in hours, minutes, and seconds, and select OK. If you wish, write your own note text that is displayed when the time expires. To start the countdown timer, select Start. To change the countdown time, select Change time. To stop the timer, select Stop timer.If the alarm time is reached when the phone is in the standby mode, the phone sounds a tone and flashes the note text if it is set or Countdown time up. To stop the alarm, press any key. If no key is pressed, the alarm automatically stops within 60 seconds. To stop the alarm and delete the note text, select Exit. To restart the countdown timer, select Restart.■StopwatchYou can measure time, take intermediate times, or take lap times using the stopwatch. During timing, the other functions of the phone can be used. To set the stopwatch timing in the background, press the end key.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.
Organizer73Select Menu > Organiser > Stopwatch and from the following options:Split timing — to take intermediate times. To start the time observation, select Start. Select Split every time that you want to take an intermediate time. To stop the time observation, select Stop.To save the measured time, select Save.To start the time observation again, select Options > Start. The new time is added to the previous time. To reset the time without saving it, select Reset.Lap timing — to take lap timesContinue — to view the timing that you have set in the backgroundShow last — to view the most recently measured time if the stopwatch is not resetView times or Delete times — to view or delete the saved times
Applications7414. Applications■Launch a gameYour phone software includes some games. Select Menu > Applications > Games. Scroll to the desired game, and select Open.To set sounds, lights, and shakes for the game, select Menu > Applications > Options > Application settings.For more options related to a game, see “Some application options,” p. 74.■Launch an applicationYour phone software includes some Java applications. Select Menu > Applications > Collection. Scroll to an application, and select Open.■Some application optionsDelete — to delete the application from the phoneDetails — to give additional information about the applicationUpdate version — to check if a new version of the application is available for download from Web (network service)Application access — to restrict the application from accessing the network. Different categories are shown. Select in each category one of the available permissions.Web page — to provide further information or additional data for the application from an Internet page (network service). It is only shown if an Internet address has been provided with the application.■Download an applicationYour phone supports J2ME Java applications. Make sure that the application is compatible with your phone before downloading it.
Applications75Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.You can download new Java applications and games in different ways.Use the Nokia Application Installer from PC Suite to download the applications to your phone, or select Menu > Applications > Options > Downloads > Application downloads; the list of available bookmarks is shown. See “Bookmarks,” p. 78.For the availability of different services, pricing, and tariffs, contact your service provider.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.
Web7615. WebYou can access various mobile Internet services with your phone browser. Important: Use only services that you trust and that offer adequate security and protection against harmful software.Check the availability of these services, pricing, tariffs, and instructions with your service provider.With the phone browser you can view the services that use wireless markup language (WML) or extensible hypertext markup language (XHTML) on their pages. Appearance may vary due to screen size. You may not be able to view all details of the Internet pages. ■Set up browsingYou may receive the configuration settings required for browsing as a configuration message from the service provider that offers the service that you want to use. See “Configuration settings service,” p. 10. You can also enter all the configuration settings manually. See “Configuration,” p. 62.■Connect to a serviceEnsure that the correct configuration settings of the service are activated.1. To select the settings for connecting to the service, select Menu > Web > Settings > Configuration settings.2. Select Configuration. Only the configurations that support browsing service are shown. Select a service provider, Default, or Personal configuration for browsing. See “Set up browsing,” p. 76.3. Select Account and a browsing service account contained in the active configuration settings.4. Select Display terminal window > Yes to perform manual user authentication for intranet connections.
Web77Make a connection to the service in one of the following ways:•Select Menu > Web > Home; or in the standby mode, press and hold 0.• To select a bookmark of the service, select Menu > Web > Bookmarks.• To select the last URL, select Menu > Web > Last web address.• To enter the address of the service, select Menu > Web > Go to address. Enter the address of the service, and select OK.■Browse pagesAfter you make a connection to the service, you can start browsing its pages. The function of the phone keys may vary in different services. Follow the text guides on the phone display. For more information, contact your service provider.Browse with phone keysTo browse through the page, scroll in any direction.To select a highlighted item, press the call key, or select Select.To enter letters and numbers, press the 0 to 9 keys. To enter special characters, press *.Options while browsingSelect from the following options:Home — to return to your start pageShortcuts — to open a new list of options that are specific to the page. This option is only available if the page contains shortcuts.Add bookmark — to save the page as a bookmarkBookmarks — to access the list of bookmarks. See “Bookmarks,” p. 78.Page options — to show the list of options for the active pageHistory — to get a list showing the last visited URLsDownloads — to show the list of bookmarks for downloading
Web78Other options — to show a list of other optionsReload — to reload and update the current pageThe service provider may also offer other options.Direct callingWhile browsing, you can make a phone call, and save a name and a phone number from a page.■BookmarksYou can save page addresses as bookmarks in the phone memory.1. While browsing, select Options > Bookmarks; or in the standby mode, select Menu > Web > Bookmarks.2. Scroll to a bookmark, and select it, or press the call key to make a connection to the page associated with the bookmark.3. Select Options to view, edit, delete, or send the bookmark; to create a new bookmark; or to save the bookmark to a folder.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.Receive a bookmarkWhen you have received a bookmark that is sent as a bookmark, 1 bookmark received is displayed. To view the bookmark, select Show.■Appearance settingsWhile browsing, select Options > Other options > Appearance settings; or in the standby mode, select Menu > Web > Settings > Appearance settings and from the following options:Text wrapping > On — to set the text to continue on the next line on the display. If you select Off, the text is abbreviated.Font size — to set the font size
Web79Show images > No — to hide pictures on the page. This can speed up the browsing of pages that contain a lot of pictures.Alerts > Alert for unsecure conn. > Yes — to set the phone to alert when a secure connection changes to an unsecure one during browsingAlerts > Alert for unsecure items > Yes — to set the phone to alert when a secure page contains an unsecure item. These alerts do not guarantee a secure connection. For more information, see “Browser security,” p. 81.Character encoding > Content encoding — to select the encoding for the browser page contentCharacter encoding > Unicode (UTF-8) web add. > On — to set the phone to send a URL as a UTF-8 encoding. You may need this setting when you access a Web page created in foreign language.Screen size > Full or Small— to set the screen layoutJavaScript > Enable — to enable the Java scripts■Security settingsCookiesA cookie is data that a site saves in the cache memory of your phone. Cookies are saved until you clear the cache memory. See “Cache memory,” p. 81.While browsing, select Options > Other options > Security > Cookie settings; or in the standby mode, select Menu > Web > Settings > Security settings > Cookies. To allow or prevent the phone from receiving cookies, select Allow or Reject.Scripts over secure connectionYou can select whether to allow the running of scripts from a secure page. The phone supports WML scripts.While browsing, to allow the scripts, select Options > Other options > Security > WMLScript settings; or in the standby mode, select Menu > Web > Settings > Security settings > WMLScripts in sec. conn. > Allow.
Web80■Download settingsTo automatically save all downloaded files in Gallery, select Menu > Web > Settings > Downloading settings > Automatic saving > On.■Service inboxThe phone is able to receive service messages sent by your service provider (network service). Service messages are notifications (for example, news headlines), and they may contain a text message or an address of a service.To access the Service inbox in the standby mode, when you have received a service message, select Show. If you select Exit, the message is moved to the Service inbox. To access the Service inbox later, select Menu > Web > Service inbox.To access the Service inbox while browsing, select Options > Other options > Service inbox. Scroll to the message you want, and to activate the browser and download the marked content, select Retrieve. To display detailed information on the service notification or to delete the message, select Options > Details or Delete.Service inbox settingsSelect Menu > Web > Settings > Service inbox settings.To set whether you want to receive service messages, select Service messages > On or Off.To set the phone to receive service messages only from content authors approved by the service provider, select Message filter > On. To view the list of the approved content authors, select Trusted channels.To set the phone to automatically activate the browser from the standby mode when the phone has received a service message, select Automatic connection > On. If you select Off, the phone activates the browser only after you select Retrieve when the phone has received a service message.
Web81■Cache memoryA cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed is stored in the cache.To empty the cache while browsing, select Options > Other options > Clear the cache; in the standby mode, select Menu > Web > Clear the cache.■Browser securitySecurity features may be required for some services, such as online banking or shopping. For such connections you need security certificates and possibly a security module, which may be available on your SIM card. For more information, contact your service provider.Security moduleThe security module improves security services for applications requiring a browser connection, and allows you to use a digital signature. The security module may contain certificates as well as private and public keys. The certificates are saved in the security module by the service provider.To view or change the security module settings, select Menu > Settings > Security > Security module settings.
Web82CertificatesImportant: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.There are three kinds of certificates: server certificates, authority certificates, and user certificates. You may receive these certificates from your service provider. Authority certificates and user certificates may also be saved in the security module by the service provider.To view the list of the authority or user certificates downloaded into your phone, select Menu > Settings > Security > Authority certificates or User certificates.   is displayed during a connection, if the data transmission between the phone and the content server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Digital signatureYou can make digital signatures with your phone if your SIM card has a security module. Using the digital signature can be the same as signing your name to a paper bill, contract, or other document.To make a digital signature, select a link on a page, for example, the title of the book you want to buy and its price. The text to sign, which may include the amount and date, is shown.
SIM services83Check that the header text is Read and that the digital signature icon  is shown.If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.To sign the text, read all of the text first, and select Sign.The text may not fit within a single screen. Therefore, make sure to scroll through and read all of the text before signing.Select the user certificate you want to use. Enter the signing PIN (see “Access codes,” p. 9), and select OK. The digital signature icon disappears, and the service may display a confirmation of your purchase.16. SIM servicesYour SIM card may provide additional services. You can access this menu only if it is supported by your SIM card. The name and contents of the menu depend on the available services.For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.To set the phone to show you the confirmation messages sent between your phone and the network when you are using the SIM services, select Menu > Settings > Phone > Confirm SIM serv. actions > Yes.Accessing these services may involve sending messages or making a phone call for which you may be charged.
PC connectivity8417. PC connectivityYou can send and receive e-mail, and access the Internet when your phone is connected to a compatible PC through a Bluetooth or a data cable connection. You can use your phone with a variety of PC connectivity and data communications applications.■Nokia PC SuiteWith Nokia PC Suite you can synchronize contacts, calendar, notes, and to-do notes between your phone and the compatible PC or a remote Internet server (network service). You may find more information and PC Suite on the Nokia Web site at www.nokia.com/support.■EGPRS, HSCSD, and CSDWith your phone you can use the enhanced GPRS (EGPRS), general packet radio service (GPRS), high speed circuit switched data (HSCSD), and circuit switched data (CSD, GSM data) data services.For availability and subscription to data services, contact your network operator or service provider.The use of HSCSD services consumes the phone battery faster than normal voice or data calls. You may need to connect the phone to a charger for the duration of data transfer.See “Modem settings,” p. 57.■Data communication applicationsFor information on using a data communication application, refer to the documentation provided with it.Making or answering phone calls during a computer connection is not recommended, as it might disrupt the operation.For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. Do not move the phone by holding it in your hand during a data call.
Battery information8518. Battery information■Charging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger and then disconnect and reconnect it to start the charging.Unplug the charger from the electrical plug and the device when not in use. Do not leave fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.
Battery information86■Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it, and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase. Authenticate hologram1. When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2. When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.3. Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.
Battery information874.  Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.To create a text message enter the 20-digit code, for example, 12345678919876543210, and send to +44 7786 200276.To create a text message,• For countries in Asia Pacific, excluding India: Enter the 20-digit code, for example, 12345678919876543210, and send to +61 427151515.• For India only: Enter Battery followed by the 20-digit battery code, for example, Battery 12345678919876543210, and send to 5555.National and international operator charges will apply.You should receive a message indicating whether the code can be authenticated.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery.
Technical Information8819. Technical InformationWeight 103 grams (3.6 ounces) incl. BL-4B batteryBattery 700 mAh Li-Ion BatteryNetworks Wireless networks GSM 900, 1800 and 1900Size  Volume:   4.5 cubic inches (73 ccm)Length:  3.5 in (88 mm)Width:  1.7 in (43 mm)Thickness:  0.9 in (23 mm)Frequency range (Rx) GSM 900: 925 - 960 MHzGSM1800: 1805 - 1880 MHzGSM1900: 1930 - 1990 MHzFrequency range (Tx) GSM 900: 880 - 915 MHzGSM 1800: 1710 - 1785 MHzGSM1900: 1850 - 1910 MHzTx output power 2 W (max)Battery voltage 3.7 V DCNumber of channels GSM 900: 174GSM 1800: 374GSM1900: 299Memory size 32 MB flash memory16 MB RAMOperating temperature 59 °F to 77 °F(15 °C to 25 °C)
Care and maintenance89Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.
Additional safety information90Additional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.■Operating environmentRemember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body. To transmit data files or messages, this device requires a quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure that the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.■Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PacemakersPacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should do the following:
Additional safety information91• Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker• Not carry the device in a breast pocket • Hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you suspect interference, switch off your device, and move the device away.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.■VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.■Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel
Additional safety information92depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.■Emergency callsImportant: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequate signal strength.Some networks may require that a valid SIM card is properly inserted in the device.2. Press the end key as many times as needed to clear the display and ready the device for calls.3. Enter the official emergency number for your present location. Emergency numbers vary by location.4. Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.■Certification information (SAR)THIS MODEL PHONE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines (ICNIRP). These limits establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards and
Additional safety information93guidelines include a substantial safety margin designed to assure the safety of the public, regardless of age and health and to account for any variations in measurements.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be well below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value when tested according to international testing procedures for use at the ear is 0.66 W/kg. SAR values may vary depending on national reporting and testing requirements and the network band. Use of device accessories and enhancements may result in different SAR values. Additional SAR information may be provided under product information at www.nokia.com.USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged over 1 gram of tissue. This device model has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.62 W/kg and when properly worn on the body is 0.86 W/kg. Information about this device can be found on the FCC's website at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: PPIRM-70X.
APPENDIX94APPENDIX■A message from the CTIA© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved. 1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone: (202) 785-0081Safety is the most important call you will ever make.A Guide to Safe and Responsible Wireless Phone UseTens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need.
APPENDIX95When it comes to the use of wireless phones, safety is your most important call.Wireless phone "Safety Tips"1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. .Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to do” list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with
APPENDIX96times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.8. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.9. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!10.Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.11.Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be
APPENDIX97stolen, call roadside assistance or other special non-emergency wireless number.Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.The wireless industry reminds you to use your phone safely when driving.For more information, please call 1-888-901-SAFE.For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85■Message from the FDAThe U.S. Food and Drug Administration (FDA) provides the following consumer information about wireless phones.See http://www.fda.gov/cellphones/ for updated information.Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.
APPENDIX98What is FDA's role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:• Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:• National Institute for Occupational Safety and Health• Environmental Protection Agency• Federal Communications Commission• Occupational Safety and Health Administration• National Telecommunications and Information AdministrationThe National Institutes of Health participates in some interagency working group activities, as well.FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF
APPENDIX99exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a
APPENDIX100key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure. Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use,
APPENDIX101then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.Do wireless phone accessories that claim to shield the head from RF radiation work?Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike "hand-free" kits, these so-called "shields" may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.How does FCC Audit Cell Phone RF?After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct “post-grant” testing to determine whether production versions of the phone are being produced to conform with FCC regulatory requirements. The manufacturer of a cell phone that does not meet FCC’s regulatory requirements may be required to remove the cell phone from use and to refund the purchase price or provide a replacement phone, and may be subject to civil or criminal penalties. In addition, if the cell phone presents a risk of injury to the user, FDA may also take regulatory action. The most important post-grant test, from a consumer’s perspective, is testing of the RF emissions of the phone. FCC measures the Specific Absorption Rate (SAR) of the phone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the test measurement may be less than or greater than the actual RF emitted by
APPENDIX102the phone. This difference between the RF test measurement and actual RF emission is because test measurements are limited by instrument accuracy, because test measurement and actual use environments are different, and other variable factors. This inherent variability is known as “measurement uncertainty.” When FCC conducts post-grant testing of a cell phone, FCC takes into account any measurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takes regulatory action, it will have a sound, defensible scientific basis.FDA scientific staff reviewed the methodology used by FCC to measure cell phone RF, and agreed it is an acceptable approach, given our current understanding of the risks presented by cellular phone RF emissions. RF emissions from cellular phones have not been shown to present a risk of injury to the user when the measured SAR is less than the safety limits set by FCC (an SAR of 1.6 w/kg). Even in a case where the maximum measurement uncertainty permitted by current measurement standards was added to the maximum permissible SAR, the resulting SAR value would be well below any level known to produce an acute effect. Consequently, FCC’s approach with measurement uncertainty will not result in consumers being exposed to any known risk from the RF emitted by cellular telephones.FDA will continue to monitor studies and literature reports concerning acute effects of cell phone RF, and concerning chronic effects of long-term exposure to cellular telephone RF (that is, the risks from using a cell phone for many years). If new information leads FDA to believe that a change to FCC’s measurement policy may be appropriate, FDA will contact FCC and both agencies will work together to develop a mutually-acceptable approach.Updated July 29, 2003

Navigation menu