Microsoft RM-92 GSM 850/900/1800/1900/WCDMA 2100 w/BT &WLAN; User Manual R1113 en
Microsoft Mobile Oy GSM 850/900/1800/1900/WCDMA 2100 w/BT &WLAN; R1113 en
Contents
- 1. USER GUIDE
- 2. User Guide
- 3. manual
USER GUIDE
FCC Draft
Nokia N80 User Guide
9243910
ISSUE 1 EN
R1113_en.book Page 1 Friday, November 25, 2005 12:49 PM
FCC Draft
Part No. 9243910, issue No. 1
Copyright © 2005 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
Nokia, Nokia Connecting People, the Nokia Original Enhancements logos, Nokia
N80, Visual Radio, and Pop-Port are trademarks or registered trademarks of Nokia
Corporation. Other product and company names mentioned herein may be
trademarks or tradenames of their respective owners.
Nokia tune is a sound mark of Nokia Corporation.
This product includes software licensed from Symbian Software Ltd (c)
1998-200(5). Symbian and Symbian OS are trademarks of Symbian Ltd.
Java™ and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one
or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425.
Other patents pending.
Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745,
5016009, 5126739, 5146221, and 5414425. Other patents pending.
Part of the software in this product is © Copyright ANT Ltd. 1998. All rights
reserved.
US Patent No 5818437 and other pending patents. T9 text input software
Copyright (C) 1997-2005. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged
in a personal and noncommercial activity and (ii) for use in connection with
MPEG-4 video provided by a licensed video provider. No license is granted or shall
be implied for any other use. Additional information, including that related to
promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC.
See <http://www.mpegla.com>.
The information contained in this user guide was written for the Nokia N80
product. Nokia operates a policy of ongoing development. Nokia reserves the right
to make changes and improvements to any of the products described in this
document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT
DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED ‘AS IS’. EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT.
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY
TIME WITHOUT PRIOR NOTICE.
The availability of particular products may vary by region. Please check with the
Nokia dealer nearest to you.
This device may contain commodities, technology, or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law is
prohibited.
FCC / INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the condition that
this device does not cause harmful interference.
R1113_en.book Page 2 Friday, November 25, 2005 12:49 PM
FCC Draft
Contents
For your safety...........................................6
Welcome.....................................................9
Accessibility solutions.......................................................... 9
Find information about your device................................. 9
Contact your service provider............................................ 9
Your Nokia N80...................................... 11
Settings ..................................................................................11
Transfer content from another device...........................11
Essential indicators.............................................................12
Keypad lock (keyguard)......................................................13
Volume and loudspeaker control ....................................13
Clock........................................................................................13
Headset...................................................................................14
Wrist strap.............................................................................14
Wireless LAN.........................................................................14
Home network......................................................................16
Memory card.........................................................................17
File manager .........................................................................18
Useful shortcuts...................................................................19
Help .........................................................................................20
Tutorial ...................................................................................20
Camera......................................................21
Take pictures.........................................................................21
Edit images ...........................................................................26
Record videos .......................................................................27
Edit video clips.....................................................................29
Gallery.......................................................31
View images and video clips............................................32
Slide show.............................................................................32
Presentations........................................................................33
Albums ...................................................................................33
Back-up files.........................................................................33
Home network......................................................................33
Media applications ..................................37
Music player .........................................................................37
Image print ...........................................................................38
RealPlayer..............................................................................39
Movie director......................................................................41
Messaging.................................................43
Write text..............................................................................44
Write and send messages .................................................45
R1113_en.book Page 3 Friday, November 25, 2005 12:49 PM
FCC Draft
Inbox—receive messages...................................................47
Mailbox.................................................................................. 49
View messages on a SIM card......................................... 51
Messaging settings.............................................................51
Contacts (Phonebook).............................56
Save names and numbers................................................. 56
Copy contacts ...................................................................... 57
Add ringing tones for contacts ....................................... 58
Create contact groups ....................................................... 58
Make calls ................................................59
Voice calls ............................................................................. 59
Video calls.............................................................................61
Video sharing........................................................................ 62
Answer or decline a call.................................................... 64
Log........................................................................................... 66
Services.....................................................68
Access point.......................................................................... 68
Bookmarks view................................................................... 68
Connection security ........................................................... 69
Browse.................................................................................... 69
Download and purchase items........................................ 70
End a connection ................................................................ 70
Settings.................................................................................. 70
Calendar ...................................................72
Create calendar entries .....................................................72
Calendar views.....................................................................72
Manage your calendar entries.........................................73
Calendar settings ................................................................73
My own.....................................................74
Visual Radio..........................................................................74
Go to—add shortcuts..........................................................75
IM—instant messaging ......................................................76
Games..................................................................................... 79
Connectivity .............................................80
Bluetooth connectivity...................................................... 80
Infrared connection............................................................ 83
Data cable............................................................................. 84
PC connections .................................................................... 84
Connection manager..........................................................85
Synchronization................................................................... 85
Device manager................................................................... 86
Office........................................................87
Calculator.............................................................................. 87
Converter............................................................................... 87
Notes ...................................................................................... 87
Recorder................................................................................. 88
R1113_en.book Page 4 Friday, November 25, 2005 12:49 PM
FCC Draft
Quickoffice ............................................................................88
Customize your device............................ 90
Profiles—set tones...............................................................90
Change the look of your device.......................................91
Active standby mode..........................................................92
Tools......................................................... 93
Media key ..............................................................................93
Settings ..................................................................................93
Voice commands............................................................... 103
Application manager ....................................................... 104
Activation keys for copyright-protected files...........106
Troubleshooting: Q&A.......................... 107
Enhancements....................................... 111
Battery information ............................. 113
Charging and discharging...............................................113
Nokia battery authentication guidelines....................114
Care and maintenance ......................... 116
Additional safety information............. 117
R1113_en.book Page 5 Friday, November 25, 2005 12:49 PM
FCC Draft
6
For your safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for
further information.
SWITCH ON SAFELY Do not switch the
device on when wireless phone use is
prohibited or when it may cause interference
or danger.
ROAD SAFETY COMES FIRST Obey all local
laws. Always keep your hands free to operate
the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE All wireless devices may be
susceptible to interference, which could affect
performance.
SWITCH OFF IN HOSPITALS Follow any
restrictions. Switch the device off near
medical equipment.
SWITCH OFF IN AIRCRAFT Follow any
restrictions. Wireless devices can cause
interference in aircraft.
SWITCH OFF WHEN REFUELING Do not use
the device at a refueling point. Do not use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING Follow any
restrictions. Do not use the device where
blasting is in progress.
USE SENSIBLY Use only in the normal position
as explained in the product documentation. Do
not touch the antenna unnecessarily.
QUALIFIED SERVICE Only qualified personnel
may install or repair this product.
ENHANCEMENTS AND BATTERIES Use only
approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE Your device is not
water-resistant. Keep it dry.
BACK-UP COPIES Remember to make back-up
copies or keep a written record of all important
information.
CONNECTING TO OTHER DEVICES When
connecting to any other device, read its user
R1113_en.book Page 6 Friday, November 25, 2005 12:49 PM
FCC Draft
7
guide for detailed safety instructions. Do not
connect incompatible products.
EMERGENCY CALLS Ensure the phone
function of the device is switched on and in
service. Press the end key as many times as
needed to clear the display and return to the
start screen. Enter the emergency number,
then press the call key. Give your location. Do
not end the call until given permission to do so.
About your device
The wireless device described in this guide is approved for
use on the EGSM 850/900/1800/1900 and UMTS 2100
networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws, and
respect privacy and legitimate rights of others.
When taking and using images or video clips, obey all laws,
and respect local customs as well as privacy and legitimate
rights of others.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on.
Do not switch the device on when wireless device use
may cause interference or danger.
Network services
To use the phone you must have service from a wireless
service provider. Many of the features in this device
depend on features in the wireless network to function.
These network services may not be available on all
networks or you may have to make specific arrangements
with your service provider before you can utilize network
services. Your service provider may need to give you
additional instructions for their use and explain what
charges will apply. Some networks may have limitations
that affect how you can use network services. For
instance, some networks may not support all
language-dependent characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
they will not appear on your device menu. Your device may
also have been specially configured. This configuration
may include changes in menu names, menu order, and
icons. Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL)
that run on TCP/IP protocols. Some features of this device,
such as MMS, browsing, e-mail, and content downloading
using the browser or over MMS, require network support
for these technologies.
R1113_en.book Page 7 Friday, November 25, 2005 12:49 PM
FCC Draft
8
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
Enhancements, batteries, and
chargers
Always switch the device off, and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3, or AC-4 charger and from
an AC-1, ACP-8, ACP-9, ACP-12, ACH-8, ACH-9, or
ACH-12 charger when used with the CA-44 charger
adapter.
The battery intended for use with this device is BL-5B.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
R1113_en.book Page 8 Friday, November 25, 2005 12:49 PM
FCC Draft
Welcome
9
Welcome
Model number: Nokia N80-1
Hereinafter referred to as Nokia N80.
Congratulations on your purchase of the Nokia N80. Your
device provides many functions that are practical for daily
use, such as a calendar, a clock, an alarm clock, a radio, and
a built-in camera. Use the camera for recording video clips
and taking pictures that you can, for example, attach as a
wallpaper in the standby mode. See ‘Camera’, p. 21.
You can customize your device with ringing tones and
themes. See ‘Customize your device’, p. 90.
Other features on your device are:
• Multimedia messaging. See ‘Messaging’, p. 43.
• Instant messages. See ‘IM—instant messaging’, p. 76.
• Music player. See ‘Music player’, p. 37.
• Wireless Bluetooth technology. See ‘Bluetooth
connectivity’, p. 80.
• Wireless local area network (wireless LAN)
connectivity. See ‘Wireless LAN’, p. 14.
• Home networking through wireless LAN and Universal
Plug and Play. See ‘Home network’, p. 16.
•Java
TM applications. See ‘Application manager’, p. 104.
• Web browser. See ‘Services’, p. 68.
Accessibility solutions
Nokia is committed to making mobile devices easy to use
for all individuals, including those with disabilities. For
more information, visit www.nokiaaccessibility.com.
Find information about your
device
Information about your device is provided on the device
label, which is on the back of the device under the battery.
The label contains the model and serial numbers, as well
as the following:
• Device type (such as RM-92)
• Device model (such as Nokia N80-1)
• International mobile equipment identity (IMEI)
• FCC ID number
Contact your service provider
In many cases, the service provider will make available
descriptions of its services and instructions for using
features, such as the following:
• Voice mail and voice privacy
R1113_en.book Page 9 Friday, November 25, 2005 12:49 PM
FCC Draft
Welcome
10
• Call waiting, call forwarding, and caller ID
•Messaging
• News and information services
• Selected Internet services
Service providers may differ in their support of features.
R1113_en.book Page 10 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
11
Your Nokia N80
Settings
You may have MMS, GPRS, streaming, and Mobile Internet
settings from your service providers already installed in
your device, or you may receive the settings from the
service providers as a special text message.
Transfer content from
another device
You can transfer content, such as contacts, from a
compatible Nokia device to your Nokia N80 using
Bluetooth connectivity or infrared. The type of content
that can be transferred depends on the phone model. If the
other device supports synchronization, you can also
synchronize data between the other device and your Nokia
N80.
You can insert your SIM card in the other device. When
Nokia N80 is switched on without a SIM card, the offline
profile is automatically activated.
Transfer content
1To use the application for the first time, press , and
select Tools > Transfer. If you have used the
application before and want to start a new transfer,
select Transfer data.
In the information view, select Continue.
2Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
3If you select Bluetooth connectivity:
To have Nokia N80 search for devices with Bluetooth
connectivity, select Continue. Select your other device
from the list. You are asked to enter a code on your
Nokia N80. Enter a code (1-16 digits), and select OK.
Enter the same code on the other device, and select
OK. The devices are now paired. See ‘Pair devices’,
p. 82.
For some phone models, the Transfer application is
sent to the other device as a message. To install
Transfer on the other device, open the message, and
follow the instructions on the display.
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 83.
4From your Nokia N80, select the content you want to
copy from the other device.
Content is copied from the memory of the other device to
the corresponding location in your Nokia N80. Copying
R1113_en.book Page 11 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
12
time depends on the amount of data to be transferred.
You can cancel copying and continue later.
If the other device supports synchronization, you can keep
the data up-to-date in both devices. To start a
synchronization with a compatible Nokia device, select
Phones, scroll to the device, and select Options >
Synchronize. Follow the instructions on the display.
To view the log of a previous transfer, select Transfer log.
Essential indicators
The device is being used in a GSM network.
The device is being used in a UMTS network (network
service).
You have one or more unread messages in the Inbox
folder in Messag..
You have received new e-mail in the remote mailbox.
There are messages waiting to be sent in the Outbox
folder.
You have missed calls.
Shown if Ringing type is set to Silent and Message
alert tone, IM alert tone, and E-mail alert tone are set
to Off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are forwarded to another
number. If you have two phone lines (network service), the
indicator for the first line is and for the second
.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A loopset is connected to the device.
A TTY is connected to the device.
A data call is active.
A GPRS or EDGE packet data connection is available.
A GPRS or EDGE packet data connection is active.
A GPRS or EDGE packet data connection is on hold.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
You have set the device to scan for wireless LANs, and
a wireless LAN is available. See ‘Wireless LAN’, p. 99.
A wireless LAN connection is active in a network that
has encryption.
R1113_en.book Page 12 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
13
A wireless LAN connection is active in a network that
does not have encryption.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
Keypad lock (keyguard)
To lock the keys, close the sliding keypad, and select Yes
when Lock keypad? is displayed. To lock the keys when the
slide is closed, press the power key, and select Lock
keypad.
To unlock, open the sliding keypad, or press (Unlock),
and select OK when Unlock keypad? is displayed.
When the keypad lock is on, calls may be possible to the
official emergency number programmed into your device.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening to a sound, press or .
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudsp..
To turn off the loudspeaker, select Options > Activate
handset.
Clock
Press , and select Clock. To set a new alarm, select
Options > Set alarm. When an alarm is active, is
shown.
To turn off the alarm, select Stop, or to stop the alarm for
5 minutes, select Snooze.
If the alarm time is reached while the device is switched
off, the device switches itself on and starts sounding the
alarm tone. If you select Stop, the device asks whether you
want to activate the device for calls. Select No to switch
off the device or Yes to make and receive calls. Do not
R1113_en.book Page 13 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
14
select Yes when wireless phone use may cause
interference or danger.
To cancel an alarm, select Clock > Options > Remove
alarm.
Clock settings
To change the clock settings, select Clock > Options >
Settings.
To change the time or date, select Time or Date.
To change the clock shown in the standby mode, select
Clock type > Analog or Digital.
To allow the mobile phone network to update the time,
date, and time zone information to your device (network
service), select Auto time update > On.
To change the alarm tone, select Clock alarm tone.
World clock
To open the world clock view, open Clock, and press .
In the world clock view, you can view the time in different
cities.
To add cities to the list, select Options > Add city. You
can add a maximum of 15 cities to the list.
To set your current city, scroll to a city, and select
Options > My current city. The city is displayed in the
clock main view, and the time in your device is changed
according to the city selected. Check that the time is
correct and matches your time zone.
Headset
Connect a compatible
headset to the Pop-PortTM
connector of your device.
Warning: When
you use the headset, your
ability to hear outside
sounds may be affected.
Do not use the headset where it can endanger your safety.
Wrist strap
Thread the strap as shown,
and tighten it.
Wireless LAN
Your device supports wireless local area network (wireless
LAN). With wireless LAN, you can connect your device to
the Internet and compatible devices that have wireless
LAN. For information about using your device in a home
network, see ‘Home network’, p. 16.
R1113_en.book Page 14 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
15
There may be restrictions on using wireless LAN in some
locations. Check with your local authorities or service
provider.
Features using wireless LAN, or allowing such features to
run in the background while using other features, increase
the demand on battery power and reduce the battery life.
Your device supports the following wireless LAN features:
• IEEE 802.11b/g standard
• Operation at a frequency of 2.4 GHz
• Encryption methods wired equivalent privacy (WEP)
with keys up to 128 bits, Wi-Fi protected access (WPA),
and 802.1x. These functions can be used only if they are
supported by the network.
You can create an Internet access point (IAP) in a wireless
LAN, and use it for applications that need to connect to the
Internet.
Create an Internet access point
1Press , and select Connect. > Conn mgr > Availab.
WLAN.
2The device searches for wireless LANs within range.
Scroll to the network in which you want to create an
Internet access point, and select Options > Define
access point.
3The device creates an Internet access point with default
settings. To view or change these settings, see ‘Access
points’, p. 96.
When an application asks you to select an access point,
select the created access point, or to search for wireless
LANs in range, select WLAN network.
A wireless LAN connection is established when you create
a data connection using a wireless LAN Internet access
point. The active wireless LAN connection ends when you
end the data connection. To end the connection, see
‘Connection manager’, p. 85.
You can use wireless LAN during a voice call or when
packet data is active. You can only be connected to one
wireless LAN access point device at a time, but several
applications can use the same wireless LAN connection.
When you activate the Offline profile, you can still use
wireless LAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a wireless LAN connection.
There are two operating modes in wireless LAN:
infrastructure and ad hoc.
In the infrastructure operating mode, your device is
connected to a wireless LAN access point device. Through
the access point device, you can access other compatible
devices or a wired LAN.
In the ad hoc operating mode, compatible devices can
send and receive data directly with each other. To create
an Internet access point for the ad hoc network, see
‘Access points’, p. 96.
R1113_en.book Page 15 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
16
Tip! To check the unique Media Access Control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.
Home network
Your device is compatible with Universal Plug and Play
architecture (UPnP). Using a wireless LAN access point
device or a wireless LAN router, you can create a home
network and connect compatible UPnP devices that
support wireless LAN to the network, such as your Nokia
N80, a compatible PC, a compatible printer, a compatible
sound system, a compatible TV, or a sound system or TV
equipped with a compatible wireless multimedia receiver.
After you have configured the home network, you can
copy, view, or play compatible media files and print
images in Gallery on the other connected compatible
devices, for example, view images stored on your Nokia
N80 on a compatible TV. See ‘Home network’, p. 33 and
‘Image print’, p. 38.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, transferred, viewed, played, or printed.
To set up home networking in your wireless LAN, first
create and configure your wireless LAN home Internet
access point, then configure the devices. On your Nokia
N80, configure the settings in the Home network
application. See ‘Home network’, p. 33. To connect a
compatible PC to the home network, on the PC, you must
install the Home Media Server software from the CD-ROM
supplied with your Nokia N80.
After you have completed the necessary configurations in
all devices connected to the network, you can start using
the home network. See ‘View media files’, p. 35.
The home network uses the security settings of the
wireless LAN connection. Use the home network feature in
a wireless LAN infrastructure network with a wireless LAN
access point device or a router and encryption enabled.
Security tips
When you configure your wireless LAN home network,
enable an encryption method, first on your access point
device or router, then on the other compatible devices you
intend to connect to your home network. Refer to the
documentation of the devices. Keep any passcodes secret
and in a safe place separate from the devices.
To view or change the settings of the wireless LAN Internet
access point in your Nokia N80, see ‘Access points’, p. 96.
If you use the ad hoc operating mode to create a home
network with a compatible device, enable one of the
encryption methods in WLAN security mode when you
configure the Internet access point. This step reduces the
risk of an unwanted party joining the ad hoc network.
R1113_en.book Page 16 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
17
Your device notifies you if another device attempts to
connect to it and the home network. Do not accept
connection requests from an unknown device.
If you use wireless LAN in a network that does not have
encryption, switch off sharing Nokia N80 files to other
devices, or do not share any private media files. For how to
change sharing settings, see ‘Home network’, p. 33.
Memory card
You can use a compatible miniSD card
as extra storage space to save the
memory on your device. You can also
back up information from your device to
the memory card.
Use only compatible miniSD cards with this device. Other
memory cards, such as Reduced Size MultiMediaCards, do
not fit in the memory card slot and are not compatible
with this device. Using an incompatible memory card may
damage the memory card as well as the device, and data
stored on the incompatible card may be corrupted.
Keep all memory cards out of the reach of small children.
Insert the memory card
1To insert the memory
card, place your finger in
the recess on top of the
door of the memory card
slot, and open the door.
2Insert the memory card
in the slot. Make sure
that the contact area on
the card is facing up and
towards the slot with the
bevelled corner facing
the base of the device.
3Push the card in. You can hear a
click when the card locks into
place.
4Close the door. You cannot use
the memory card if the door is
open.
Eject the memory card
1Before you eject the card, press
the power key, and select Remove mem. card. All
applications are closed.
2When Remove memory card and press 'OK' is
displayed, open the door of the memory card slot.
3Press the memory card to release it from the slot.
R1113_en.book Page 17 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
18
4Remove the memory card. If the device is switched on,
select OK.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may
damage the memory card as well as the device, and data
stored on the card may be corrupted.
Memory card tool
Press , and select Tools > Memory. You can use a
miniSD card as extra storage space and for backing up the
information in the device memory.
To back up information from the device memory to a
memory card, select Options > Backup phone mem.
To restore information from the memory card to the
device memory, select Options > Restore from card.
Format a memory card
When a memory card is reformatted, all data on the card
is permanently lost.
Some memory cards are supplied preformatted and others
require formatting. Consult your retailer to find out if you
must format the memory card before you can use it.
To format a memory card, select Options > Format mem.
card. Select Yes to confirm.
File manager
Many features of the device, such as contacts, messages,
images, videos, ringing tones, calendar notes, documents,
and downloaded applications, use memory to store data.
The free memory available depends on how much data is
already saved in the device memory.
You can use a compatible memory card as extra storage
space. Memory cards are rewritable, so you can delete old
information and save new data on a memory card.
To browse files and folders in the device memory or on a
memory card (if inserted), press , and select Tools > File
mgr.. The device memory view ( ) opens. Press to
open the memory card view ( ), if available.
To move or copy files to a folder, press and at the
same time to mark a file, and select Options > Move to
folder or Copy to folder.
To find a file, select Options > Find and the memory from
which to search, and enter a search text that matches the
file name.
R1113_en.book Page 18 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
19
View memory consumption
To view what types of data you have in the device and how
much memory the different data types consume, select
Options > Memory details. The amount of available free
memory is shown in Free memory.
Memory low—free memory
The device notifies you if the device or the memory card
memory is low.
To free device memory, transfer data to a compatible
memory card, if you have one. Mark files to be moved, and
select Move to folder > Memory card, and a folder.
You can also transfer media files to a compatible PC, for
example, using the transfer option in Gallery. See ‘Back-up
files’, p. 33.
Tip! You can use Nokia Phone Browser available in
Nokia PC Suite to view the different memories in your
device and transfer data.
To remove data to free memory, use File mgr., or go to the
respective application. For example, you can remove the
following:
• Messages from Inbox, Drafts, and Sent folders in
Messag.
• Retrieved e-mail messages from the device memory
• Saved Web pages
• Saved images, videos, or sound files
• Contact information
•Calendar notes
• Downloaded applications. See also ‘Application
manager’, p. 104.
• Any other data that you no longer need
Useful shortcuts
Use shortcuts to quickly get the most from your device.
Refer to the relevant sections in this user guide for further
details of the functions.
Standby mode
• To switch between applications that are open, press
and hold , and select an application. If memory is
low, the device may close some applications. The
device saves any unsaved data before closing an
application.
Leaving applications running in the background
increases the demand on battery power and reduces
the battery life.
• To start the camera, press and hold the capture key for
more than 1 second.
• To call your voice mailbox (network service), press and
hold .
• To open multimedia applications, press or press and
hold . See ‘Media key’, p. 93.
R1113_en.book Page 19 Friday, November 25, 2005 12:49 PM
FCC Draft
Your Nokia N80
20
• To change the profile, press , and select a profile.
• To switch between Normal and Silent profiles, press
and hold . If you have two phone lines (network
service), this action switches between the two lines.
• To open the last dialed numbers list, press .
• To use voice commands, press and hold .
• To start a connection to Services (network service),
press and hold . See ‘Services’, p. 68.
For further shortcuts available in the standby mode, see
‘Active standby mode’, p. 92.
Edit text and lists
• To mark an item in a list, scroll to it, and press and
at the same time.
• To mark multiple items in a list, press and hold
while you press or . To end the selection, release
, then release .
• To copy and paste text: To select letters and words,
press and hold . At the same time, press or
to highlight text. To copy the text to clipboard, while
still holding , select Copy. To insert the text into a
document, press and hold , and select Paste.
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to access help
for the current view.
When you are reading the instructions, to switch between
help and the application that is open in the background,
press and hold .
To open help from the main menu, select Tools > Help.
Select the desired application to view its help topics.
Tutorial
The tutorial gives you information about some of the
features of your device. To access the tutorial in the menu,
press , and select My own > Tutorial and the section
you want to view.
R1113_en.book Page 20 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
21
Camera
Your Nokia N80 has two cameras, a high resolution camera
on the back of the device (the main camera) and a lower
resolution camera on the front (the secondary camera).
Both cameras can be used to take still pictures and record
video. The secondary camera on the front is used in portrait
mode, and the main camera on the back in landscape
mode.
The Nokia N80 device supports an image capture
resolution of 2048 x 1536 pixels. The image resolution in
these materials may appear different.
To activate the camera,
press , and select
Imaging > Camera, or
press and hold the capture
key. In the viewfinder, you
can see the view to be
captured. To switch
between cameras, select
Options > Use secondary
camera or Use main camera.
The images and video clips are automatically saved in
Images & video folder in Gallery. The cameras produce
.jpeg images. Video clips are recorded in the 3GPP file
format with the .3gp file extension (Normal and Sharing
video quality modes) or in the .mp4 file format (High video
quality mode). See ‘Video settings’, p. 28.
You can send images and video clips in a multimedia
message, as an e-mail attachment or by using Bluetooth
connectivity.
Take pictures
If the camera is in Video mode, open the image mode by
selecting Options > Image mode.
To select the secondary camera, for example, to include
yourself in the picture, select Options > Use secondary
camera.
To empty memory for new images, and delete copies of the
transferred files, select Options > Go to free memory
(main camera only).
To take a picture, in the main camera, press the capture
key. When using the secondary camera, press the scroll
key. Do not move the device before the image is saved.
To make lighting and color adjustments before taking a
picture, select Options > Image setup. See ‘Setup
settings—Adjust color and lighting’, p. 24.
R1113_en.book Page 21 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
22
Saving the captured image may take longer if you change
the zoom, lighting, or color settings.
To select a shooting mode, select Options > Image
setup > Shooting mode. See ‘Shooting modes’, p. 24.
The camera indicators show the following:
• The device memory ( ) and memory card ( )
indicators (1) show where images are saved.
• The images indicator (2) estimates how many images,
depending on the selected image quality, fit in the
remaining memory of your device or the memory card
(if inserted).
• The shooting mode indicator (3) shows the active
shooting mode.
•The flash indicator
(4) shows if the flash
is set to Automatic
(), Red eye redu.
(), On (), or
Off ().
• The self-timer
indicator (5) shows
that the self-timer is
activated. See ‘You in
the picture—self-timer’, p. 23.
• The sequence mode indicator (6) shows that the
sequence mode is active. See ‘Take pictures in a
sequence’, p. 23.
• The image resolution indicator (7) indicates the quality
of the picture.
Shortcuts are as follows:
• Scroll up and down to zoom in and zoom out. The zoom
indicator, which appears on the side pane, shows the
zoom level.
• Scroll left to enter the Image setup settings. See ‘Setup
settings—Adjust color and lighting’, p. 24.
When taking a picture, note the following:
• Use both hands to keep the camera still.
• To take images or record video in different
environments, use the proper shooting mode for each
environment.
• The quality of a zoomed picture is lower than that of a
nonzoomed picture.
• The camera goes into the battery saving mode if there
are no keypresses for a moment. To continue taking
pictures, press .
After the image is taken:
• If you do not want to keep the image, press , or
select Options > Delete.
• To send the image Via multimedia, Via e-mail, Via
Bluetooth, or Via infrared, press , or select
Options > Send. For more information, see
‘Messaging’, p. 43 and ‘Bluetooth connectivity’, p. 80.
This option is not available during an active call.
R1113_en.book Page 22 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
23
• To send an image to the other party during an active
call, select Options > Send to caller.
• To edit the picture, select Options > Edit. See ‘Edit
images’, p. 26.
• To print the picture, select Options > Print. See ‘Image
print’, p. 38.
Take pictures in a sequence
Advanced sequence is available only in the main camera.
To set the camera to take several pictures in a sequence,
select Options > Advanced sequence, and set the
shooting frequency. The number of pictures is restricted by
the available memory to a maximum of 100.
To take the pictures, press the capture key.
After you take the pictures, they are shown in a grid on the
display. To view a picture, press to open it.
You can also use the sequence mode with the self-timer.
To return to the sequence mode viewfinder, press the
capture key.
You in the picture—self-timer
Self-timer is available only in the main camera.
Use the self-timer to delay the capture so that you can
include yourself in the picture. To set the self-timer delay,
select Options > Self timer > 2 seconds, 10 seconds, or
20 seconds. To activate the self-timer, select Activate.
The self-timer indicator ( ) blinks and the device beeps
when the timer is running. The camera takes the picture
after the selected delay elapses.
You can also use the self-timer in the sequence mode.
Tip! Select Options > Self timer > 2 seconds to keep
your hand steady when taking a picture.
The flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover
the flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available: Automatic (),
Red eye redu. (), On (), and Off ().
To use the flash, select Options > Image setup > Flash >
On.
If the flash is set to Off or Automatic during bright
conditions, the flash still emits a low light when an image
is captured. This indicates to the subject of the picture
that the picture is taken. There is no flash effect on the
resultant picture.
R1113_en.book Page 23 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
24
If the flash is set to Red eye redu., it decreases the
redness of the eyes in the picture.
Setup settings—Adjust color and
lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, select Options > Image setup or Video setup, and
select from the following options:
Shooting mode—Select a proper shooting mode for the
environment in which you take pictures. Every shooting
mode uses its own lighting settings that have been
adjusted according to a certain kind of environment.
Flash (images only)—Set the flash according to the
lighting conditions. See ‘The flash’, p. 23.
White balance—Select the current lighting condition
from the list. This allows the camera to reproduce colors
more accurately.
Exposure value (images only)—Adjust the exposure time
of the camera.
Color tone—Select a color effect from the list.
Image sharpness (images only)—Adjust the sharpness of
the image.
Brightness—Select the brightness you want.
Contrast—Select the contrast you want.
Color saturation—Adjust the depth of the colors in the
picture.
The screen display changes to match any settings you
make, so that you see how the change affects the pictures
or videos.
The available settings vary depending on the selected
camera.
The setup settings are camera specific; if you change the
settings in the secondary camera, the settings in the main
camera do not change. The setup settings do, however,
transfer between the image and video modes.
The setup settings return to the default settings when you
close the camera. If you select a new shooting mode, the
settings are replaced by the settings of the selected
shooting mode. See ‘Shooting modes’, p. 24. If you must
change the setup settings, you can change them after
selecting a shooting mode.
Shooting modes
A shooting mode helps you to find the right color and
lighting settings for the current environment. Select a
proper shooting mode for taking pictures or recording
video clips from a shooting modes list. The settings of each
R1113_en.book Page 24 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
25
shooting mode have been set according to a certain style
or environment.
Your device has a close-up switch located under the main
camera lens. With the close-up switch you can select
whether you want to take close-up pictures or pictures of
text. To use the close-up mode as a default, turn the switch
to close-up mode ( ). To switch between Close-up mode
and Document text shooting modes, select Options >
Image setup > Shooting mode.
To select another shooting mode, turn the switch back to
the normal position ( ), select Options > Image setup or
Video setup > Shooting mode, and the proper shooting
mode.
Video shooting modes
Automatic ( )(default) and Night ()
Image shooting modes
Automatic () (default), User (), Portrait (),
Landscape (), Sports ( ) (when you use the Sports
shooting mode, the resolution of the images is reduced to
1280x960. See Image quality in ‘Still image camera
settings’, p. 25.), Night landscape (), Night portrait
(), and Candlelight ().
When you take pictures, the default shooting mode is
Automatic. You can select the User shooting mode as the
default shooting mode.
To make your own shooting mode suitable for a certain
environment, scroll to User, and select Options >
Change. In the user defined shooting mode you can adjust
different lighting and color settings. To copy the settings
of another shooting mode, select Based on shooting
mode and the desired shooting mode.
The available shooting modes vary depending on the
selected camera.
Still image camera settings
There are two kinds of settings for the still image camera:
Image setup and main settings. To adjust Image setup,
see ‘Setup settings—Adjust color and lighting’, p. 24. The
setup settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again. To change the main settings,
select Options > Settings and from the following:
Image quality—Print 3M - Large (resolution 2048 x
1536), Print 2M - Med. (resolution 1600 x 1200), Print
1.3M - Small (resolution 1280 x 960), E-mail
0.5M(resolution 800 x 600), or MMS 0.3M (resolution
640 x 480). The better the image quality, the more
memory the image consumes. If you want to print the
image, select Print 3M - Large, Print 2M - Med., or Print
1.3M - Small. If you want to send it through e-mail,
R1113_en.book Page 25 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
26
select E-mail 0.5M. To send the image through MMS,
select MMS 0.3M.
Add to album—Select whether you want to save the
image to a certain album in Gallery. If you select Yes, a
list of available albums opens.
Show captured image—Select Yes if you want to see the
captured image after it is taken, or No if you want to
continue taking pictures immediately.
Extended zoom (main camera only)—Select On if you
want to achieve maximum zoom when taking a picture.
The quality of a zoomed picture is lower than that of a
nonzoomed picture. If you want to limit the zoom to
where the selected image quality is maintained, select
Off.
Default image name—Define the default name for the
images.
Shutter tone—Select the tone you want to hear when
you take a picture.
Memory in use—Select where to store your images.
Edit images
To edit the pictures after taking them, or the ones already
saved in Gallery, select Options > Edit.
Select Apply effect to, for example, crop and rotate the
image; adjust the brightness, color, contrast, and
resolution; and add effects, text, clip art, or a frame to the
picture.
To crop an image, select Options > Apply effect > Crop.
To crop the image size manually, select Manual, or select
a predefined aspect ratio from the list. If you select
Manual, a cross appears in the upper left corner of the
image. Move the scroll key to select the area to crop, and
select Set. Another cross appears in the lower right corner.
Again select the area to be cropped. To adjust the first
selected area, select Back. The selected areas form a
rectangle, which forms the cropped image.
If you selected a predefined aspect ratio, select the upper
left corner of the area to be cropped. To resize the
highlighted area, use the scroll key. To freeze the selected
area, press . To move the area within the picture, use
the scroll key. To select the area to be cropped, press .
To reduce redness of the eyes in an image, select Options >
Apply effect > Red eye reduction. Move the cross onto
the eye, and press . A loop appears on the display. To
resize the loop to fit the size of the eye, move the scroll
key. To reduce the redness, press .
Shortcuts in the image editor:
• To view an image in the full screen, press . To return
to the normal view, press again.
R1113_en.book Page 26 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
27
• To rotate an image clockwise or counterclockwise,
press or .
• To zoom in or out, press or .
• To move on a zoomed image, scroll up, down, left, or
right.
Record videos
If the camera is in Image mode, select video mode by
selecting Options > Video mode.
To select the secondary camera to, for example, include
yourself in the video, select Options > Use secondary
camera.
To empty memory for new video clips, and delete copies of
the transferred files, select Options > Go to free memory
(main camera only).
1In the main camera, press the capture key, or in the
secondary camera, press to start recording. The
record icon is shown. The LED flash is lit, and a tone
sounds, indicating to the subject that video is being
recorded. There is no flash effect on the resultant video.
2To pause recording at any time, select Pause. The pause
icon ( ) blinks on the display. Video recording
automatically stops if recording is set to pause and
there are no keypresses within a minute.
3Select Continue to resume recording.
4Select Stop, to stop recording. The video clip is
automatically saved to the Images & videofolder of
Gallery. See ‘Gallery’, p. 31.
To make lighting and color adjustments before recording
a video, select Options > Video setup. See ‘Setup
settings—Adjust color and lighting’, p. 24.
To select a shooting mode, select Options > Video
setup > Shooting mode. See ‘Shooting modes’, p. 24.
Video recorder indicators show the following:
• The device memory
( ) and memory card
( ) indicators (1)
show where the video
is saved.
• The current video
length indicator (2)
shows elapsed time
and time remaining.
• The shooting mode
indicator (3) shows
the active shooting
mode.
• Image stabilizer (4) indicates that the image stabilizer
is active, and dampens the effects of small movements
on the image sharpness (main camera only).
R1113_en.book Page 27 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
28
• The microphone indicator (5) shows that the
microphone is muted.
• The file format indicator (6) indicates the format of the
video clip.
• The video quality indicator (7) indicates whether the
quality of the video is High, Normal or Sharing.
• The video file type indicator (8) indicates the format in
which the video clip is saved.
Shortcuts are as follows:
• Scroll up or down to zoom in or zoom out. The zoom
indicator, which appears on the side pane, shows the
zoom level.
• Scroll left to enter the Video setup settings. See ‘Setup
settings—Adjust color and lighting’, p. 24.
After a video clip is recorded:
• To immediately play the video clip you just recorded,
select Options > Play.
• If you do not want to keep the video, press , or
select Options > Delete.
• To send the video Via multimedia, Via e-mail, Via
Bluetooth, or Via infrared, press , or select
Options > Send. For more information, see
‘Messaging’, p. 43 and ‘Bluetooth connectivity’, p. 80.
This option is not available during an active call. You
cannot send video clips saved in the .mp4 file format
in a multimedia message.
• To send a video clip to the other party during an active
call, select Options > Send to caller.
• To edit the video, select Options > Edit. See ‘Edit video
clips’, p. 29.
Video settings
There are two kinds of settings for the video recorder:
Video setup and main settings. To adjust Video setup, see
‘Setup settings—Adjust color and lighting’, p. 24. The setup
settings return to the default settings after you close the
camera, but the main settings remain the same until you
change them again. To change the main settings, select
Options > Settings and from the following:
Audio recording—Select On if you want to record both
image and sound.
Video quality—Set the quality of the video clip to High,
Normal, or Sharing. The quality is indicated with one of
the following icons: (High), (Normal), or
(Sharing). If you select High or Normal, the length of the
video recording is restricted by the available space on your
memory card (if inserted), and up to 1 hour per clip. If you
want to view the video on a compatible TV or PC, select
High video quality, which has CIF resolution (352x288)
and the .mp4 file format. You cannot send video clips saved
in the .mp4 file format in a multimedia message. If you
want to view the clip in mobile devices, select Normal,
R1113_en.book Page 28 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
29
which has QCIF resolution (176x144) and the .3gp file
format. To send the video clip through MMS, select
Sharing (QCIF resolution, .3gp file format). The video clip
is limited to 300 KB (about 20 seconds in duration) so that
it can be conveniently sent as a multimedia message to a
compatible device. Some networks, however, may only
support sending of multimedia messages with a maximum
size of 100 KB. Contact your network operator or service
provider for more information.
Add to album—Select whether you want to save the
recorded video clip to a certain album in Gallery. Select
Yes to open a list of available albums.
Show captured video—Select whether you want the first
frame of the recorded video clip to be shown on the display
after the recording stops. Select Options > Play to view
the video clip.
Default video name—Define the default name for video
clips.
Memory in use—Define the default memory store: device
memory or memory card (if inserted).
Edit video clips
To edit video clips in Gallery and create custom video clips,
scroll to a video clip, and select Options >Edit. See
‘Gallery’, p. 31. You can create custom video clips by
combining and trimming video clips, and adding images,
sound clips, transitions, and effects. Transitions are visual
effects that you can add in the beginning and end of the
video or between the video clips.
In the video editor you can see two timelines: video clip
timeline and sound clip timeline. The images, text, and
transitions added to a video clip are shown on the video
clip timeline. To switch between the timelines, scroll up or
down.
Edit video, sound, image, text, and
transitions
To create custom video clips, mark and select one or more
video clips, and select Options > Edit.
To modify the video, select from the following options:
Edit video clip:
Cut—Trims the video clip in the Cut video clip view.
Add color effect—Inserts a color effect on the video clip.
Use slow motion—Slows the speed of the video clip.
Mute sound/Unmute sound—Mutes or unmutes the
original video clip sound.
Move—Moves the video clip to the selected location.
Remove—Removes the video clip from the video.
R1113_en.book Page 29 Friday, November 25, 2005 12:49 PM
FCC Draft
Camera
30
Duplicate—Makes a copy of the selected video clip.
Edit text (shown only if you added text)—To move,
remove or duplicate text; change the color and style of
the text; define how long it stays on the screen; and add
effects to the text.
Edit image (shown only if you added an image)—To move,
remove or duplicate an image; define how long it stays on
the screen; and set a background or a color effect to the
image.
Edit sound clip (shown only if you added a sound clip)—
To cut or move the sound clip, to adjust its length, or to
remove or duplicate the clip.
Edit transition—There are three types of transitions: at
the start of a video, at the end of a video, and transitions
between video clips. A start transition can be selected
when the first transition of the video is active.
Insert—Video clip, Image,
Text, Sound clip, or New
sound clip.
Movie—Preview the movie
in the full screen or as a
thumbnail, save or send the
movie, or cut the movie to a
proper size for sending it in
a multimedia message.
To take a snapshot of a video clip, in the Cut video view,
select Options > Take snapshot, or in the thumbnail
Preview view, press , and select Take snapshot.
To save your video, select Options > Movie > Save. To
define the Memory in use, select Options > Settings. The
default is the device memory.
In the Settings view, you can also define Default video
name, Default sc. shot name, Resolution, and Memory in
use.
Select Send > Via multimedia, Via e-mail, Via Bluetooth,
or Via infrared, if you want to send the video. Contact your
network operator or service provider for details of the
maximum multimedia message size that you can send. If
your video is too large to send in a multimedia message,
appears.
Tip! If you want to send a video clip that is over the
maximum multimedia message size allowed by your
service provider, you can send the clip using Bluetooth
wireless technology. See ‘Send data using Bluetooth
connectivity’, p. 82. You can also transfer your videos into
a compatible PC using Bluetooth connectivity, or by using
a compatible SD memory card reader (enhancement).
R1113_en.book Page 30 Friday, November 25, 2005 12:49 PM
FCC Draft
Gallery
31
Gallery
To store and organize your images, video clips, sound clips,
playlists, and streaming links, or share your files with other
compatible Universal Plug and Play (UPnP) devices through
wireless LAN, press , and select Gallery. To open the
gallery from the Camera application, select Options > Go
to Gallery. From Camera, only the Images & video folder
is available.
Tip! To switch from Gallery to the camera, in the
Images & video folder, select Camera.
Select Images & video ,
Tracks , Sound clips ,
Streaming links ,
Presentations , All files
, or Home network ,
and press to open it.
You can browse and open
folders, mark, copy, and
move items to folders. You
can also create albums; and
mark, copy, and add items to
albums. See ‘Albums’, p. 33.
To open a file, press . See ‘View images and video clips’,
p. 32. Video clips, .ram files, and streaming links are
opened and played in the RealPlayer application, and the
sound clips in the Music player application. See
‘RealPlayer’, p. 39, and ‘Music player’, p. 37.
To copy or move files to a compatible memory card (if
inserted) or to device memory, select a file and Options >
Organize > Copy to memory card/Move to memory card
or Copy to phone mem./Move to phone mem..
Files stored on the memory card (if inserted) are indicated
with .
To reduce the size of files that you already copied to other
locations, such as to a compatible PC, select Options >
Shrink. Selecting Shrink reduces the resolution of an
image to 640x480. To increase free memory space, select
a file and Options > Free memory. See ‘Back-up files’,
p. 33.
To download files into Gallery in one of the main folders
using the browser, select Graphic downl. or Video downl.,
Track downl., or Sound downl.. The browser opens, and
you can select a bookmark from which the site can
download.
R1113_en.book Page 31 Friday, November 25, 2005 12:49 PM
FCC Draft
Gallery
32
View images and video clips
Pictures taken and video clips recorded with the camera
are stored in the Images & video folder in Gallery. The
quality of a video clip is indicated with one of the
following icons: (High), (Normal) and
(Sharing). Images and video clips can also be sent to you
in a multimedia message, as an e-mail attachment,
through Bluetooth connectivity, or by using infrared. To
be able to view a received image or video clip in the
gallery or in the media player, you must save it in the
device memory or on a compatible memory card (if
inserted).
Open the Images & video folder in Gallery. The images
and video clip files are in a loop, and ordered by date. The
number of files can be seen on the display. To browse the
files, scroll up or down. To browse the files in a continuous
loop, press and hold the scroll key up or down.
To browse files in groups, scroll left or right.
To edit a photo or a video clip, select Options > Edit. An
image editor or a video editor opens.
To add an image or a video clip to an album in Gallery,
select Options > Albums > Add to Album. See ‘Albums’,
p. 33.
To create custom video clips, select a video clip, or several
clips in Gallery, and select Options > Edit. See ‘Edit video
clips’, p. 29.
To print your images on a compatible printer connected to
your device, or to store them on your memory card (if
inserted) for printing, select Options > Print. See ‘Image
print’, p. 38.
To zoom an image, select Options > Zoom in or Zoom out.
The zooming ratio is at the top of the display. The zooming
ratio is not stored permanently.
To use the picture as a background image, select the
picture, and Options > Set as wallpaper.
To delete an image or video clip, press .
Slide show
Select Options > Slide show > Start to view images and
video clips in the full screen mode. The slide show starts
from the oldest file. Select from the following:
•Play—to open the RealPlayer application, and play a
video clip
•Pause—to pause the slide show
•Continue—to resume the slide show
•End—to close the slide show
To browse the images, press (previous) or (next).
R1113_en.book Page 32 Friday, November 25, 2005 12:49 PM
FCC Draft
Gallery
33
To adjust the tempo of the slide show, before starting the
slide show, select Options > Slide show > Settings >
Delay between slides.
To add sound to the slide show, select Options > Slide
show > Settings and from the following:
•Music—Select On or Off.
•Track—Select a music file from the list.
To decrease or increase the volume, press or .
Presentations
With presentations, you can view SVG (scalable vector
graphics) files, such as cartoons and maps. SVG images
maintain their appearance when printed or viewed with
different screen sizes and resolutions. To view SVG files,
select the Presentations folder, scroll to an image, and
select Options > Play.
To zoom in, press . To zoom out, press .
To switch between full screen and normal screen, press *.
Albums
With albums you can conveniently manage your images
and video clips. To view the albums list, in the Images &
video folder, select Options > Albums > View albums.
To create a new album, select Options > New album.
Enter a name for the album, and select OK.
To add a picture or a video clip to an album in Gallery,
scroll to a picture or video clip, and select Options >
Albums > Add to album. A list of albums opens. Select
the album to which you want to add the picture or video
clip, and press .
To remove a file from an album, press . The file is not
deleted from the Images & video folder in Gallery.
Back-up files
To transfer and back-up media files from your device to a
compatible PC through the Wireless LAN, select Options >
Transfer > Start. See ‘Wireless LAN’, p. 14.
Your device starts a device search. Select a device, and a
folder to which you want to transfer the media files. Press
OK.
To change the Storage device or Storage folder settings,
select Options > Settings.
Home network
Your device is compatible with Universal Plug and Play
architecture (UPnP). Using a wireless LAN access point
R1113_en.book Page 33 Friday, November 25, 2005 12:49 PM
FCC Draft
Gallery
34
device or a wireless LAN router, you can create a home
network and connect compatible UPnP devices that
support wireless LAN to the network, such as your Nokia
N80, a compatible PC, a compatible printer, and a
compatible sound system or a TV, or a sound system or TV
equipped with a compatible wireless multimedia receiver.
Please note that using the wireless LAN functionality of
the Nokia N80 in a home network requires a working
wireless LAN home connection setup and the other target
home devices to be UPnP enabled and to be connected to
the same home network.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network. To
manage your Home network settings, press , and
select Connect. > Home network. You can also use the
home network to view, play, copy, or print compatible
media files from Gallery. See ‘View media files’, p. 35.
Home network settings
To share media files saved in Gallery with other
compatible UPnP devices through wireless LAN, you must
first create and configure your wireless LAN home
Internet access point, and then configure the Home
network application. See ‘Wireless LAN’, p. 14, and the
wireless LAN settings in ‘Access points’, p. 96 and
‘Wireless LAN’, p. 99.
The options related to Home network are not available in
Gallery before the Home network settings have been
configured.
Configure Settings
To configure the Home network application, select
Connect. > Home network > Settings, and from the
following:
Content sharing—Allow or deny sharing media files with
compatible devices. Do not set Content sharing on before
you have configured all the other settings. If you set
Content sharing on, the other UPnP compatible devices in
the home network can view and copy your files.
Home access point—Select your home Internet access
point. If your home network does not have wireless LAN
security settings enabled, you will get a security warning.
You can continue, and switch the wireless LAN security on
later; or cancel defining the access point, and first switch
on the wireless LAN security. See Wireless LAN in ‘Access
points’, p. 96.
My device name— Enter a name for your device that is
shown to the other compatible devices in the home
network.
R1113_en.book Page 34 Friday, November 25, 2005 12:49 PM
FCC Draft
Gallery
35
Define content for sharing
When you set Content sharing on, the other UPnP
compatible devices in the home network can view and
copy the files you want to share with them.
To select media files for sharing with other devices, or to
view the sharing status of Images & video or Music
albums, select Share content.
View media files
To connect a compatible PC to the home network, you
must install the related software from the CD-ROM
supplied with your Nokia N80.
If Content sharing is on in your device, the other UPnP
compatible devices in the home network can view and
copy the media files you have selected to share in Share
content. If you do not want the other devices to access
your files, set Content sharing off. Even if Content
sharing is off in your device, you can still view and copy
the media files stored in another home network device if it
is allowed by the other device.
Show media files stored in your device
To select images, videos, and sound clips stored in your
device, and show them in another home network device,
such as a compatible TV, do the following:
1In Gallery, select an image, a video clip, or a sound clip.
2Select Options > Enable external.
3Select a compatible device in which the media file is
shown. The images are shown both in the other home
network device and your device, and the video clips
and sound clips are played only in the other device.
Show media files stored in the other device
To select media files that are stored on another home
network device, and show them in your device; or in a
compatible TV, for example, do the following:
1In Gallery, select Home network. Your device starts
the search of other compatible devices. Device names
start to appear on the display.
2Select a device from the list.
3Select the type of media you want to view from the
other device. The available file types depend on the
features of the other device.
4Select the image, video clip, or music clip you want to
view, and select Options > Enable external (images
and video) or Play via home network (music).
5Select the device in which the file is shown.
To stop sharing the media file, select Options > Disable
external.
To print images saved in Gallery through Home network
with a UPnP compatible printer, select the print option in
Gallery. See ‘Image print’, p. 38. Content sharing does not
have to be switched on.
R1113_en.book Page 35 Friday, November 25, 2005 12:49 PM
FCC Draft
Gallery
36
To search files with different criteria, select Options >
Find. To sort the found files, select Options > Sort by.
Copy media files
To copy or transfer media files from your device to another
compatible device, such as a UPnP compatible PC, select
a file in Gallery, and Options >Organize> Copy to home
network or Move to home network. Content sharing
does not have to be switched on.
To copy or transfer files from the other device to your
device, select a file in the other device, and Options >
Copy to phone or Copy to memory card. Content
sharing does not have to be switched on.
R1113_en.book Page 36 Friday, November 25, 2005 12:49 PM
FCC Draft
Media applications
37
Media applications
Music player
Press , and select Mus. plyr.. With the music player,
you can play music files and create and listen to playlists.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Add music
When you open the music player for the first time, the
player searches the device memory for music files to create
a music library.
After you add or remove music files in the device, update
your music library. Select Options > Music library >
Options > Update Music library.
Tip! You can transfer music files from your device to
a compatible memory card (if inserted) with Nokia
Audio Manager available in Nokia PC Suite.
Play music
When you open the music
player, the previously played
track or playlist is displayed.
To view the music library,
select or Options >
Music library and the
desired song list. To start
playing the songs in the
view, select Options > Play.
When a song is playing, to
change between play and
pause, press or .
To stop a song, press . To fast forward or rewind, press
and hold or . To start playing the next or previous
song, press or .
To view the currently played song list, select or
Options > Open 'Now playing'. To save the song list as a
playlist, select Options > Add to track list, and create a
new playlist, or select a saved playlist.
To adjust the volume, press or .
R1113_en.book Page 37 Friday, November 25, 2005 12:49 PM
FCC Draft
Media applications
38
To select between random play and normal play mode,
select Options > Random play. To select whether playing
stops at the end of the playlist or restarts from its
beginning, select Options > Loop.
Tip! To leave the application open and music playing
in the background, press twice to return to the
standby mode. To return to the application, press ,
and select Mus. plyr..
To open your Web bookmarks for downloading music,
select Options > Track downloads.
To return to the standby mode and leave the music
playing in the background, select Options > Play in
background.
Music library
To view the music library, select Options > Music library.
All tracks lists all music. To view sorted songs, select
Albums, Artists, Genres, or Composers. The album, artist,
genre, and composer information is collected from the ID3
or M4A tags of the song files, if available.
To add songs, albums, artists, genres or composers to a
playlist, select the items and Options > Add to track list.
You can create a new playlist or add to an existing one.
To view playlists, select Track lists. To create a new
playlist, select Options > New track list. When viewing a
playlist you have created yourself, to add more songs,
select Options > Add tracks.
To delete a playlist, press . Deleting a playlist only
deletes the playlist, not the music files.
Image print
To print images with Image print, select the image you
want to print, and the print option in the gallery, camera,
image editor, or image viewer.
Use Image print to print your images using a data cable,
wireless LAN (if available), Bluetooth connectivity, or a
compatible memory card (if available).
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically saved in
.jpeg format.
Note: To print to a printer compatible with
PictBridge, connect the data cable before you select the
print option.
Printer selection
When you use Image print for the first time, a list of
available printers is displayed after you select the image.
Select a printer. The printer is set as the default printer.
R1113_en.book Page 38 Friday, November 25, 2005 12:49 PM
FCC Draft
Media applications
39
If you have connected a printer compatible with PictBridge
using the CA-53 cable, the printer is automatically
displayed.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options > Settings >
Default printer.
Print preview
The print preview view opens only when you start printing
an image in the gallery.
The selected images are displayed using predefined
layouts. To change the layout, scroll left and right through
the available layouts for the selected printer. If the images
do not fit on a single page, scroll up or down to display the
additional pages.
Print settings
The available options vary, depending on the capabilities of
the printing device you selected.
To set a default printer, select Options > Default printer.
To select the paper size, select Paper size, the size of paper
from the list, and OK. Select Cancel to return to the
previous view.
RealPlayer
Press , and select Imaging > RealPlyr.. With RealPlyr.,
you can play video clips, or stream media files over the air.
You can activate a streaming link when you browse Web
pages, or store it in the device memory or a compatible
memory card (if inserted).
Tip! You can also view video clips or streaming links
in your device with other compatible UPnP devices,
such as a TV or a PC, through wireless LAN. See ‘View
media files’, p. 35.
RealPlyr. supports files with extensions such as .3gp,
.mp4 or .rm. However, RealPlyr. does not necessarily
support all file formats or all the variations of file formats.
For example, RealPlyr. attempts to open all .mp4 files, but
some .mp4 files may include content that is not compliant
with 3GPP standards and, therefore, is not supported by
this device.
Play video clips
1To play a media file stored in device memory, or on the
memory card (if inserted), select Options > Open and
from the following:
Most recent clips—to play one of the last six files
played in RealPlyr.
R1113_en.book Page 39 Friday, November 25, 2005 12:49 PM
FCC Draft
Media applications
40
Saved clip—to play a file saved in Gallery.
See ‘Gallery’, p. 31.
2Scroll to a file, and press to play the file.
Tip! To view a video clip in full screen mode, press
. To change back to normal screen mode, press any
key.
Shortcuts during play:
• To fast forward, press and hold .
• To rewind through the media file, press and hold .
• To mute the sound, press and hold until is
displayed. To turn on the sound, press and hold
until you see .
Stream content over the air
Many service providers require you to use an Internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
The access points may be configured when you first start
your device.
Contact your service provider for more information.
Note: In RealPlyr., you can only open an rtsp:// URL
address. However, RealPlyr. recognizes an http link to
a .ram file.
To stream content over the air, select a streaming link
saved in Gallery, on a Web page, or received in a text
message or multimedia message. Before live content
begins streaming, your device connects to the site and
starts loading the content. The content is not saved in your
device.
Receive RealPlayer settings
You may receive RealPlyr. settings in a special text
message from the network operator or service provider.
See ‘Data and settings’, p. 48. For more information,
contact your network operator or service provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video—to have RealPlyr. automatically repeat video clips
after they finish playing.
Connection—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy sett.:
Use proxy—To use a proxy server, select Yes.
Proxy serv. address—Enter the IP address of the proxy
server.
Proxy port number—Enter the port number of the proxy
server.
R1113_en.book Page 40 Friday, November 25, 2005 12:49 PM
FCC Draft
Media applications
41
Glossary: Proxy servers are intermediate servers between
media servers and their users. Some service providers
use them to provide additional security or speed up
access to browser pages that contain sound or video
clips.
Netw. sett.:
Default access point—Scroll to the access point you want
to use to connect to the Internet, and press .
Online time—Set the time for RealPlyr. to disconnect from
the network when you pause a media clip playing through
a network link. Select User defined, and press . Enter
the time, and select OK.
Lowest UDP port—Enter the lowest port number of the
server’s port range. The minimum value is 1024.
Highest UDP port—Enter the highest port number of the
server’s port range. The maximum value is 65535.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
Movie director
To create muvees, press , and select Imaging > Movie.
muvees are short, edited video clips that can contain video,
images, music, and text. Quick muvee is created
automatically by Movie director after you select the style
for the muvee. Movie director uses the default music and
text associated with the chosen style. In a Custom muvee
you can select your own video and music clips, images and
style, and add an opening and closing message. You can
send muvees with MMS.
Open Movie, and press or to move between the
and views. You can also return to the main
view from the view by selecting Done.
The view contains a list of video clips that you can
Play, Send, Rename, and Delete.
Create a quick muvee
1In the Movie director main view, select Quick muvee.
2Select a style for the muvee from the style list. The
created muvee is saved in the Movie director muvee
list. The muvee is played automatically after saving.
Create a custom muvee
1In the Movie Director main view, select Custom
muvee.
2Select the clips you want to include in your muvee in
Video, Image, Style, or Music.
After you select video clips and images, to define the
order in which the files are played in the muvee, select
Options > Advanced options. To select the file you
R1113_en.book Page 41 Friday, November 25, 2005 12:49 PM
FCC Draft
Media applications
42
want to move, press . Then scroll to the file below
which you want to place the marked file, and press
.
To cut the video clips, select Options > Select
contents. See ‘Select content’, p. 42.
In Message you can add an opening and closing text
to a muvee.
3Select Create muvee and from the following:
Multimedia message—to optimize the length of the
muvee for MMS sending
Auto-select—to include all the selected pictures and
video clips in the muvee
Same as music—to set the muvee duration to be the
same as the chosen music clip
User defined—to define the length of the muvee
4Select Options > Save.
To preview the custom muvee before saving it, in the
Preview view, select Options > Play.
To create a new custom muvee by using the same style
settings, select Options > Recreate.
Select content
To edit the selected video clips, select Options >
Advanced options > Options > Select contents. You can
select which parts of the video clip you want to include or
exclude in the muvee. In the slider, green is for included,
red is for excluded, and grey is for neutral parts.
To include a part of the video clip in the muvee, scroll to
the part, and select Options > Include. To exclude a part,
select Options > Exclude. To exclude a shot, select
Options > Exclude shot.
To let Movie director randomly include or exclude a part
of the video clip, scroll to the part, and select Options >
Mark as neutral.
To let Movie director randomly include or exclude parts of
video clip, select Options > Mark all as neutral.
Settings
Select Settings to edit the following options:
Memory in use—Select where to store your muvees.
Resolution—Select the resolution of your muvees.
Default muvee name—Set a default name for the muvees.
R1113_en.book Page 42 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
43
Messaging
Press , and select Messag. (network service). In
Messag., you can create, send, receive, view, edit, and
organize text messages, multimedia messages, e-mail
messages, and special text messages containing data. You
can also receive Web service messages, cell broadcast
messages, and send service commands. Messages and data
received using Bluetooth connectivity or infrared are
received in the Inbox folder in Messag..
To create a new message, select New message.
Note: Only devices that have compatible features
can receive and display multimedia messages. The
appearance of a message may vary depending on the
receiving device.
Messag. contains the following folders:
Inbox—Received messages, except e-mail and cell
broadcast messages, are stored here. E-mail messages are
stored in the Mailbox.
My folders—Organize your messages into folders.
Tip! To avoid rewriting messages that you send often,
use texts in the templates folder.
Mailbox—Connect to your remote mailbox to
retrieve your new e-mail messages or view your previously
retrieved e-mail messages offline. See ‘E-mail’, p. 53.
Drafts—Draft messages that have not been sent are
stored here.
Sent—The last 20 messages that have been sent,
excluding messages sent using Bluetooth connectivity or
infrared, are stored here. To change the number of
messages to be saved, see ‘Other settings’, p. 55.
Outbox—Messages waiting to be sent are temporarily
stored here.
Example: Messages are placed in the outbox, for
example, when your device is outside network
coverage. You can also schedule e-mail messages to be
sent the next time you connect to your remote
mailbox.
Reports—You can request the network to send you a
delivery report of the text messages and multimedia
messages you have sent (network service). Receiving a
delivery report of a multimedia message that has been
sent to an e-mail address may not be possible.
R1113_en.book Page 43 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
44
Tip! When you have opened any of the default
folders, to switch between the folders, press or .
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options >
Service command in the main view of Messag..
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available topics
and relevant topic numbers, contact your service provider.
In the main view of Messaging, select Options > Cell
broadcast. In the main view, you can see the status of a
topic, a topic number, name, and whether it has been
flagged ( ) for follow-up.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
Write text
ABC, abc, and Abc indicate the selected character mode.
123 indicates the number mode.
Traditional text input
is displayed when you are writing text using
traditional text input.
• Press a number key ( — ) repeatedly until the
desired character appears. There are more characters
available for a number key than are printed on the key.
• If the next letter is located on the same key as the
present one, wait until the cursor appears (or press
to end the time-out period), and enter the letter.
• To insert a space, press . To move the cursor to the
next line, press three times.
Predictive text input
You can enter any letter with a single keypress. Predictive
text input is based on a built-in dictionary to which you
can add new words. is displayed when you write
text using predictive text input.
1To activate predictive text input, press , and select
Predictive text on. This activates predictive text input
for all editors in the device.
2To write the desired word,
press the keys — .
Press each key only once
for one letter. For
example, to write "Nokia"
when the English
dictionary is selected,
press for N, for o,
for k, for i, and
for a.
R1113_en.book Page 44 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
45
The word suggestion changes after each keypress.
3When you finish writing the word correctly, press
to confirm it, or press to add a space.
If the word is not correct, press repeatedly to view
the matching words the dictionary has found one by
one, or press , and select Predictive text >
Matches.
If the ? character is shown after the word, the word is
not in the dictionary. To add a word to the dictionary,
select Spell, enter the word using traditional text input,
and select OK. The word is added to the dictionary.
When the dictionary is full, a new word replaces the
oldest added word.
4Start writing the next word.
Write compound words
Write the first half of a compound word; to confirm it,
press . Write the last part of the compound word. To
complete the compound word, press to add a space.
Turn predictive text input off
To turn predictive text input off for all editors in the device,
press , and select Predictive text > Off.
Tip! To turn predictive text input on or off, quickly
press twice.
Tips on text input
To insert a number in the letter mode, press and hold the
desired number key.
To switch between the letter and number mode, press and
hold .
To switch between the different character modes, press
.
To delete a character, press . To delete more than one
character, press and hold .
The most common punctuation marks are available under
.
To open a list of special characters, press and hold .
Tip! To insert several special characters at the same
time, press when you select each character.
Write and send messages
The appearance of a multimedia message may vary,
depending on the receiving device.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
Before you can create a multimedia message or write an
e-mail, you must have the correct connection settings in
R1113_en.book Page 45 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
46
place. See ‘Receive MMS and e-mail settings’, p. 47 and
‘E-mail’, p. 53.
The wireless network may limit the size of MMS messages.
If the inserted picture exceeds this limit, the device may
make it smaller so that it can be sent by MMS.
1Select New message and from the following:
Text msg.—to send a text message
Multimedia message—to send a multimedia message
(MMS)
E-mail—to send an e-mail
If you have not set up your e-mail account, you are
prompted to do so. To start creating the e-mail
settings with the mailbox guide, select Start.
2In the To field, press
to select recipients or
groups from contacts, or
enter the recipient’s
phone number or e-mail
address. To add a
semicolon (;) that
separates the recipients,
press . You can also
copy and paste the
number or address from
the clipboard.
3In the Subject field, enter the subject of a multimedia
message or e-mail. To change the fields that are visible,
select Options > Address fields.
4In the message field, write the message. To insert a
template, select Options > Insert or Insert object >
Template.
5To add a media object to a multimedia message, select
Options > Insert object > Image, Sound clip, or Video
clip. When sound is added, is shown.
You cannot send video clips that are saved in the .mp4
format in a multimedia message. To change the format
in which recorded videos are saved, see ‘Video settings’,
p. 28.
6To take a new picture or record sound or video for a
multimedia message, select Insert new > Image,
Sound clip, or Video clip. To insert a new slide to the
message, select Slide.
To see what the multimedia message looks like, select
Options > Preview.
7To add an attachment to an e-mail, select Options >
Insert > Image, Sound clip, Video clip, or Note. E-mail
attachments are indicated by .
Tip! To send other file types as attachments, open
the appropriate application, and select Send > Via
e-mail, if available.
8To send the message, select Options > Send, or press
.
R1113_en.book Page 46 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
47
Your device supports the sending of text messages beyond
the character limit for a single message. Longer messages
are sent as a series of two or more messages. Your service
provider may charge accordingly. Characters that use
accents or other marks, and characters from some
language options like Chinese, take up more space limiting
the number of characters that can be sent in a single
message. In the navigation bar, you can see the message
length indicator counting backwards. For example, 10 (2)
means that you can still add 10 characters for the text to
be sent as two messages.
E-mail messages are automatically placed in Outbox
before sending. If sending does not succeed, the e-mail is
left in the Outbox with the Failed status.
Tip! You can combine images, video, sound, and text
to a presentation and send it in a multimedia message.
Start to create a multimedia message, and select
Options > Create presentation. The option is shown
only if MMS creation mode is set to Guided or Free.
See ‘Multimedia messages’, p. 52.
Receive MMS and e-mail settings
You may receive the settings in a message from your
network operator or service provider. See ‘Data and
settings’, p. 48.
Enter the MMS settings manually
1Press , and select Tools > Settings > Connection >
Access points, and define the settings for a
multimedia messaging access point. See ‘Connection’,
p. 95.
2Press , and select Messaging > Options >
Settings > Multim. msg. > Access point in use and
the access point you created as the preferred
connection. See also ‘Multimedia messages’, p. 52.
Before you can send, receive, retrieve, reply to, and
forward e-mail, you must do the following:
• Configure an Internet access point (IAP) correctly. See
‘Connection’, p. 95.
• Define your e-mail settings correctly. If you select
Mailbox in the Messag. main view and have not set up
your e-mail account, you are prompted to do so. To
start creating the e-mail settings with the mailbox
guide, select Start. See also ‘E-mail’, p. 53.
You must have a separate e-mail account. Follow the
instructions given by your remote mailbox and Internet
service provider (ISP).
Inbox—receive messages
In the Inbox folder, indicates an unread text
message, an unread multimedia message, data
R1113_en.book Page 47 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
48
received through infrared, and data received through
Bluetooth connectivity.
When you receive a message, and 1 new message
are shown in the standby mode. to open the message,
select Show. To open a message in Inbox, scroll to it, and
press .
To reply to a received message, select Options > Reply
To print a text or a multimedia message on a compatible
Basic Print Profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or HP
Photosmart 8150), select Options > Print.
Multimedia messages
Important: Exercise caution when opening
messages. Multimedia message objects may contain
malicious software or otherwise be harmful to your device
or PC.
You may receive a notification that a multimedia message
is waiting in the multimedia message center. To start a
packet data connection to retrieve the message to your
device, select Options > Retrieve.
When you open a multimedia message ( ), you may see
an image and a message. is shown if sound is
included, or if video is included. To play the sound or
the video, select the indicator.
To see the media objects that have been included in the
multimedia message, select Options > Objects.
If the message includes a multimedia presentation, is
displayed. To play the presentation, select the indicator.
Data and settings
Your device can receive many kinds of messages that
contain data ( ):
Configuration message—You may receive settings from
your network operator, service provider, or company
information management department in a configuration
message. To save the settings, select Options > Save all.
Business card—To save the information to Contacts, select
Options > Save business card. Certificates or sound files
attached to the business card are not saved.
Ringing tone—To save the ringing tone, select Options >
Save.
Operat. logo—To have the logo shown in the standby
mode instead of the network operator’s own identification,
select Options > Save.
Calen. entry—To save the invitation, select Options >
Save to Calendar.
Web message—To save the bookmark to the bookmarks
list in Web, select Options > Add to bookmarks. If the
R1113_en.book Page 48 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
49
message contains both access point settings and
bookmarks, to save the data, select Options > Save all.
E-mail notif.—The note tells you how many new e-mails
you have in your remote mailbox. An extended notification
may list more detailed information.
Web service messages
Web service messages ( ) are notifications (for example,
news headlines) and may contain a text message or a link.
For availability and subscription, contact your service
provider.
Mailbox
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start creating the
e-mail settings with the mailbox guide, select Start. See
also ‘E-mail’, p. 53.
When you create a new mailbox, the name you give to the
mailbox replaces Mailbox in the Messaging main view.
You can have up to six mailboxes.
Open the mailbox
When you open the mailbox, the device asks if you want
to connect to the mailbox (Connect to mailbox?).
To connect to your mailbox and retrieve new e-mail
headings or messages, select Yes. When you view
messages online, you are continuously connected to a
remote mailbox using a data connection. See also
‘Connection’, p. 95.
To view previously retrieved e-mail messages offline,
select No. When you view e-mail messages offline, your
device is not connected to the remote mailbox.
Retrieve e-mail messages
If you are offline, select Options > Connect to start a
connection to the remote mailbox.
Important: Exercise caution when opening
messages. E-mail messages may contain malicious
software or otherwise be harmful to your device or PC.
1When you have an open connection to a remote
mailbox, select Options > Retrieve e-mail and one of
the following:
New—to retrieve all new e-mail messages
Selected—to retrieve only the e-mail messages that
have been marked
All—to retrieve all messages from the mailbox
R1113_en.book Page 49 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
50
To stop retrieving messages, select Cancel.
2After you retrieve the e-mail messages, you can
continue viewing them online, or select Options >
Disconnect to close the connection and view the
e-mail messages offline.
E-mail status indicators:
The new e-mail (offline or online mode) has not
been retrieved to your device.
The new e-mail has been retrieved to your device.
The e-mail message has been read, and it has not
been retrieved to your device.
The e-mail message has been read.
The e-mail heading has been read and the
message content has been deleted from the device.
3To open an e-mail message, press . If the e-mail
message has not been retrieved and you are offline,
you are asked if you want to retrieve this message
from the mailbox.
To view e-mail attachments, open a message that has the
attachment indicator , and select Options >
Attachments. If the attachment has a dimmed indicator,
it has not been retrieved to the device; select Options >
Retrieve.
To print an e-mail message on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
Retrieve e-mail messages automatically
To retrieve messages automatically, select Options > E-
mail settings > Automatic retrieval > Header retrieval >
Always on or Only in home net., and define when and
how often the messages are retrieved.
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Delete e-mail messages
To delete the contents of an e-mail message from the
device while still retaining it in the remote mailbox, select
Options > Delete. In Delete msg. from:, select Phone
only.
The device mirrors the e-mail headings in the remote
mailbox. Although you delete the message content, the
e-mail heading stays in your device. If you want to remove
the heading as well, you must first delete the e-mail
message from your remote mailbox, and then make a
connection from your device to the remote mailbox again
to update the status.
To delete an e-mail from the device and the remote
mailbox, select Options > Delete. In Delete msg. from:,
select Phone and server.
If you are offline, the e-mail is deleted first from your
device. During the next connection to the remote mailbox,
R1113_en.book Page 50 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
51
it is automatically deleted from the remote mailbox. If you
are using the POP3 protocol, messages marked to be
deleted are removed only after you have closed the
connection to the remote mailbox.
To cancel deleting an e-mail from the device and server,
scroll to an e-mail that has been marked to be deleted
during the next connection ( ), and select Options >
Undelete.
Disconnect from the mailbox
When you are online, to end the data connection to the
remote mailbox, select Options > Disconnect.
View messages on a SIM card
Before you can view SIM messages, you must copy them to
a folder in your device.
1In the Messag. main view, select Options > SIM
messages.
2Select Options > Mark/Unmark > Mark or Mark all to
mark messages.
3Select Options > Copy. A list of folders opens.
4To start copying, select a folder and OK. To view the
messages, open the folder.
Messaging settings
Fill in all fields marked with Must be defined or with a red
asterisk. Follow the instructions given by your service
provider. You may also obtain settings from your service
provider in a configuration message.
Some or all message centers or access points may be
preset for your device by your service provider or network
operator, and you may not be able to change, create, edit,
or remove them.
Text messages
Press , and select Messag. > Options > Settings >
Text msg. and from the following:
Message centers—View a list of all text message centers
that have been defined.
Character encoding— To use character conversion to
another encoding system when available, select Reduced
support.
Msg. center in use—Select which message center is used
to deliver text messages.
Receive report—Select whether the network sends
delivery reports on your messages (network service).
Message validity—Select how long the message center
resends your message if the first attempt fails (network
R1113_en.book Page 51 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
52
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
Message sent as—Change this option only if you are sure
that your message center is able to convert text messages
into these other formats. Contact your network operator.
Preferred conn.—Select the connection used for sending
text messages: GSM network or packet data, if supported
by the network. See ‘Connection’, p. 95.
Reply via same ctr.—Select whether you want the reply
message to be sent using the same text message center
number (network service).
Multimedia messages
Press , and select Messag. > Options > Settings >
Multimedia message and from the following:
Image size—Define the size of the image in a multimedia
message: Original (shown only when the MMS creation
mode is set to Guided or Free), Small, or Large.
MMS creation mode —If you select Guided, the device
informs you if you try to send a message that may not be
supported by the recipient. Select Restricted; the device
prevents you from sending messages that may not be
supported.
Access point in use—Select which access point is used as
the preferred connection for the multimedia message
center.
Multimedia retrieval—Select how you want to receive
multimedia messages. To receive multimedia messages
automatically in your home network, select Aut. in home
network. Outside your home network, you receive a
notification that there is multimedia message that you can
retrieve in the multimedia message center.
When you are outside your home network, sending and
receiving multimedia messages may cost you more.
If you select Multimedia retrieval > Always automatic,
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home network.
Allow anon. msgs.—Select whether you want to reject
messages from an anonymous sender.
Receive ads—Define whether you want to receive
multimedia message advertisements.
Receive report—Select whether you want the status of the
sent message to be shown in the log (network service).
Receiving a delivery report of a multimedia message that
has been sent to an e-mail address may not be possible.
R1113_en.book Page 52 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
53
Deny report sending—Select whether you want to deny
your device sending delivery reports of received
multimedia messages.
Message validity—Select how long the message center
resends your message if the first attempt fails (network
service). If the recipient cannot be reached within the
validity period, the message is deleted from the message
center.
E-mail
Press , and select Messag. > Options > Settings > E-
mail and from the following:
Mailboxes—Select a mailbox to change the following
settings: Connection settings, User settings, Retrieval
settings, and Automatic retrieval.
Mailbox in use— Select which mailbox you want to use for
sending e-mail.
To create a new mailbox, select Options > New mailbox in
the mailbox main view.
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name—Enter your user name, given to you by your
service provider.
Password—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
Incoming mail serv.—Enter the IP address or host name of
the mail server that receives your e-mail.
Access point in use—Select an Internet access point (IAP).
See ‘Connection’, p. 95.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically when you
are online. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)—Select the security option used to
secure the connection to the remote mailbox.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3
protocol to encrypt the sending of passwords to the
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select
Outgoing e-mail and from the following:
R1113_en.book Page 53 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
54
My e-mail address—Enter the e-mail address given to
you by your service provider. Replies to your messages are
sent to this address.
Outgoing mail serv.—Enter the IP address or host name
of the mail server that sends your e-mail. You may only be
able to use the outgoing server of your network operator.
Contact your service provider for more information.
Access point in use—Select an Internet access point (IAP).
See ‘Connection’, p. 95.
The settings for User name, Password, Security (ports),
and Port are similar to the ones in Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces
your e-mail address in the recipient’s device when the
recipient’s device supports this function.
Send message—Define how e-mail is sent from your
device. Select Immediately for the device to connect to
the mailbox when you select Send message. If you select
During next conn., e-mail is sent when the connection to
the remote mailbox is available.
Send copy to self—Select whether you want to save a
copy of the e-mail to your remote mailbox and to the
address defined in My e-mail address.
Include signature—Select whether you want to attach a
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive
the new e-mail indications, a tone and a note, when new
mail is received to the mailbox.
Retrieval settings
E-mail to retrieve—Define which parts of the e-mail are
retrieved: Headers only, Partially (kB), Messages (for
IMAP4 only), or Msgs. & attachs..
Retrieval amount—Define how many new e-mail
messages are retrieved to the mailbox.
IMAP4 folder path (for IMAP4 only)—Define the folder
path for folders to be subscribed.
Folder subscriptions (for IMAP4 only)—Subscribe to other
folders in the remote mailbox and retrieve content from
those folders.
Automatic retrieval
E-mail notifications—Select whether you want to receive
notifications when new e-mail is received in your remote
mailbox.
E-mail notifications and automatic header retrieval cannot
be active at the same time.
Header retrieval—Select whether you want the device to
retrieve new e-mail automatically. You can define when,
and how often, the messages are retrieved.
R1113_en.book Page 54 Friday, November 25, 2005 12:49 PM
FCC Draft
Messaging
55
Retrieving e-mail messages automatically may increase
your call costs due to the data traffic.
Web service messages
Press , and select Messaging > Options > Settings >
Service message. Select whether you want to receive
service messages. If you want to set the device to
automatically activate the browser and start a network
connection to retrieve content when you receive a service
message, select Download messages > Automatically.
Cell broadcast
Check the available topics and related topic numbers with
your service provider. Press , and select Messaging >
Options > Settings > Cell broadcast and from the
following:
Reception—Select whether you want to receive cell
broadcast messages.
Language—Select the languages in which you want to
receive messages: All, Selected, or Other.
Topic detection—Select whether the device automatically
searches for new topic numbers, and saves the new
numbers without a name to the topic list.
Other settings
Press , and select Messaging > Options > Settings >
Other and from the following:
Save sent messages—Select whether you want to save a
copy of the text messages, multimedia messages, or e-
mail that you send to the Sent folder.
No. of saved msgs.—Define how many sent messages are
saved to the Sent folder at a time. The default limit is 20
messages. When the limit is reached, the oldest message
is deleted.
Memory in use—If a memory card is inserted in the
device, select the memory where you want to save your
messages: Phone memory or Memory card.
R1113_en.book Page 55 Friday, November 25, 2005 12:49 PM
FCC Draft
Contacts (Phonebook)
56
Contacts (Phonebook)
Press , and select Contacts. In Contacts you can add a
personal ringing tone or a thumbnail image to a contact
card. You can also create contact groups, which allow you
to send text messages or e-mail to many recipients at the
same time. You can add received contact information
(business cards) to contacts. See ‘Data and settings’, p. 48.
Contact information can only be sent to or received from
compatible devices.
Save names and numbers
1Select Options > New contact.
2Fill in the fields that you want, and select Done.
To edit contact cards in Contacts, scroll to the contact
card you want to edit, and select Options > Edit.
Tip! To print contact cards on a compatible Basic
Print Profile (BPP) equipped printer with Bluetooth
connectivity (such as HP Deskjet 450 Mobile Printer or
HP Photosmart 8150), select Options > Print.
To delete a contact card in Contacts, select a card, and
press . To delete several contact cards at the same time,
press and to mark the contacts, and press to
delete.
Tip! To add and edit contact cards, use Nokia Contacts
Editor available in Nokia PC Suite.
To attach a small thumbnail image to a contact card, open
the contact card, and select Options > Edit > Options >
Add thumbnail. The thumbnail image is shown when the
contact calls.
Tip! 1-touch dialing is a quick way to call frequently
used numbers. You can assign 1-touch dialing keys to
eight phone numbers. See ‘1-touch dial a phone
number’, p. 60.
Tip! To send contact information, select the card you
want to send. Select Options > Send > Via text
message, Via multimedia, Via Bluetooth, or Via
infrared. See ‘Messaging’, p. 43 and ‘Send data using
Bluetooth connectivity’, p. 82.
To add a contact to a group, select Options > Add to
group: (shown only if you have created a group). See
‘Create contact groups’, p. 58.
To view the amount of contacts, groups, and the available
memory in Contacts, select Options > Memory details.
R1113_en.book Page 56 Friday, November 25, 2005 12:49 PM
FCC Draft
Contacts (Phonebook)
57
Primary numbers and addresses
You can assign primary numbers or addresses to a contact
card. In this way if a contact has several numbers or
addresses, you can easily call or send a message to the
contact to a certain number or address. The primary
number is also used in voice dialing.
1In the address book, select a contact, and press .
2Select Options > Defaults.
3Select a default to which you want to add a number or
an address, and select Assign.
4Select a number or an address you want to set as a
default.
The primary number or address is underlined in the contact
card.
Copy contacts
To copy names and numbers from a SIM card to your
device, press , and select Contacts > Options > SIM
contacts > SIM directory. Select the names you want to
copy and Options > Copy to Contacts.
To copy contacts to your SIM card, press , and select
Contacts. Select the names you want to copy and
Options > Copy to SIM direct., or Options > Copy > To
SIM directory. Only the contact card fields supported by
your SIM card are copied.
Tip! You can synchronize your contacts to a
compatible PC with Nokia PC Suite.
SIM directory and other SIM services
For availability and information on using SIM card
services, contact your SIM card vendor. This may be the
service provider, network operator, or other vendor.
Press , and select Contacts > Options > SIM
contacts > SIM directory to see the names and numbers
stored on the SIM card. In the SIM directory you can add,
edit, or copy numbers to contacts, and you can make calls.
To view the list of fixed dialing numbers, select Options >
SIM contacts > Fixed dialing contacts. This setting is
only shown if supported by your SIM card.
To restrict calls from your device to selected phone
numbers, select Options > Activ. fixed dialing. To add
new numbers to the fixed dialing list, select Options >
New SIM contact. You need the PIN2 code for these
functions.
When you use Fixed dialing, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient’s phone number must be
included on the fixed dialing list.
R1113_en.book Page 57 Friday, November 25, 2005 12:49 PM
FCC Draft
Contacts (Phonebook)
58
When fixed dialing is activated, calls may be possible to
the official emergency number programmed into your
device.
Add ringing tones for contacts
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller’s telephone
number is sent with the call and your device recognizes
it).
1Press to open a contact card or go to the groups
list, and select a contact group.
2Select Options > Ringing tone. A list of ringing tones
opens.
3Select the ringing tone you want to use for the
individual contact or the selected group.
You can also use a video clip as a ringing tone.
To remove the ringing tone, select Default tone from the
list of ringing tones.
Create contact groups
1In Contacts, press to open the groups list.
2Select Options > New group.
3Write a name for the group or use the default name
Group %N, and select OK.
4Open the group, and select Options > Add members.
5Scroll to a contact, and press to mark it. To add
multiple members at a time, repeat this action on all
the contacts you want to add.
6Select OK to add the contacts to the group.
To rename a group, select Options > Rename, enter the
new name, and select OK.
Remove members from a group
1In the groups list, open the group you want to modify.
2Scroll to the contact, and select Options > Remove
from group.
3Select Yes to remove the contact from the group.
Tip! To check to which groups a contact belongs,
scroll to the contact, and select Options > Belongs to
groups.
R1113_en.book Page 58 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
59
Make calls
Voice calls
Tip! To increase or decrease the volume during a call,
press or . If you have set the volume to Mute,
select Unmute first, and then press or .
1In the standby mode, enter the phone number,
including the area code. To remove a number, press .
For international calls, press twice for the +
character (replaces the international access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2Press to call the number.
3Press to end the call (or to cancel the call attempt).
Pressing always ends a call, even if another
application is active.
Tip! If you want to close the sliding keypad during a
call but not end the call, press and then close the
sliding keypad within few seconds.
To make a call from Contacts, press , and select
Contacts. Scroll to the desired name, or enter the first
letters of the name to the search field. Matching contacts
are listed. To call, press . Select the call type Voice call.
You must copy the contacts from your SIM card to
Contacts before you can make a call this way. See ‘Copy
contacts’, p. 57.
To call your voice mailbox (network service), press and
hold in the standby mode. See also ‘Call forwarding’,
p. 102.
Tip! To change the phone number of your voice
mailbox, press , and select Tools > Voic. mail >
Options > Change number. Enter the number
(obtained from your service provider), and select OK.
To call a recently dialed number in the standby mode,
press . Scroll to the number, and press .
Make a conference call
1Make a call to the first participant.
2To make a call to another participant, select Options >
New call. The first call is automatically put on hold.
3When the new call is answered, to join the first
participant in the conference call, select Options >
Conference.
To add a new person to the call, repeat step 2, and
select Options > Conference > Add to conference.
R1113_en.book Page 59 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
60
Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select Options > Conference > Private.
Select a participant, and select Private. The
conference call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
Options > Add to conference to return to the
conference call.
To drop a participant, select Options > Conference >
Drop participant, scroll to the participant, and select
Drop.
4To end the active conference call, press .
1-touch dial a phone number
To activate 1-touch dialing, press , and select Tools >
Settings > Call > 1-touch dialing> On.
To assign a phone number to one of the 1-touch dialing
keys ( — ), press , and select Tools > Spd. dial.
Scroll to the key to which you want to assign the phone
number, and select Options > Assign. is reserved for
the voice mailbox.
To call in the standby mode, press the 1-touch dial key
and .
Voice dialing
Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
speaker’s voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user’s voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select Options > Play
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
R1113_en.book Page 60 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
61
2A short tone is played, and Speak now is displayed. Say
clearly the name or nickname that is saved on the
contact card.
3The device plays a synthesized voice tag for the
recognized contact in the selected device language,
and displays the name and number. After a timeout of
2.5 seconds, the device dials the number.
If the recognized contact was not correct, select Next
to view a list of other matches, or Quit to cancel voice
dialing.
If several numbers are saved under the name, the device
selects the primary number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile, Mobile (home), Mobile (work),
Telephone, Tel. (home), and Tel. (work).
Video calls
When you make a video call (network service), you can see
a real-time, two-way video between you and the recipient
of the call. The live video image, or video image captured
by the camera in your device is shown to the video call
recipient.
To be able to make a video call, you must have a USIM card
and be in the coverage of a UMTS network. For availability
of and subscription to video call services, contact your
network operator or service provider.
A video call can only be made between two parties. The
video call can be made to a compatible mobile device or
an ISDN client. Video calls cannot be made while another
voice, video, or data call is active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device. To
send a still image instead, see ‘Call settings’, p. 94.
Note: Even if you denied video sending during a
video call, the call is still be charged as a video call.
Check the pricing with your network operator or
service provider.
1To start a video call,
enter the phone
number in the standby
mode, or select
Contacts and a
contact.
2Select Options > Call
> Video call.
Starting a video call may
take a while. Waiting for
video image is shown. If
the call is not successful
(for example, video calls are not supported by the network,
R1113_en.book Page 61 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
62
or the receiving device is not compatible) you are asked if
you want to try a normal call or send a text message
instead.
The video call is active when you see two video images,
and hear the sound through the loudspeaker. The call
recipient may deny video sending ( ), in which case you
only hear the sound and may see a still image or a grey
background graphic.
To change between showing video or hearing only sound,
select Enable/Disable > Sending video, Sending audio or
Sending audio & video.
To zoom your own image, select Zoom in or Zoom out.
The zoom indicator is shown on the top of the display.
To switch the places of the sent video images on the
display, select Change image order.
To end the video call, press .
Video sharing
Use Video sharing (network service) to send live video or
a video clip from your mobile device to another
compatible mobile device during a voice call. Simply invite
a recipient to view the live video or a video clip you want
to share. Sharing begins automatically when the recipient
accepts the invitation.
The loudspeaker is active when you activate Video
sharing. You can also use a compatible headset to
continue your voice call while you share video. When a
voice call is active, select Options > Share video > Live or
Clip.
To end video sharing, select Stop. Video sharing also ends
if the active voice call ends.
Video sharing requirements
Because Video sharing requires a UMTS connection, your
ability to use Video sharing depends on the UMTS network
availability. Contact your service provider for more
information on the service and network availability, and
fees associated with using this service.
To use Video sharing you must:
• Ensure that Video sharing is installed on your Nokia
device.
• Ensure that your device is set up for person-to-person
connections. See ‘Settings’, p.63.
• Ensure you have an active UMTS connection and are
within UMTS network coverage. See ‘Settings’, p. 63. If
you start the sharing session while you are within
UMTS network coverage and a handover to GSM
occurs, the sharing session is discontinued, but your
voice call continues. Starting Video sharing is not
R1113_en.book Page 62 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
63
possible when you are not within UMTS network
coverage (for example, in a GSM network).
• Ensure that both the sender and recipient are
registered to the UMTS network. If you invite someone
to a sharing session and the recipient’s device is turned
off, is not within UMTS network coverage, or does not
have Video sharing installed or person-to-person
connections set up, the recipient does not know that
you are sending an invitation. However, you receive an
error message that the recipient cannot accept the
invitation.
Settings
Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile settings
must be configured in your device before you can use
Video sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible device. The SIP profile must also be established
to receive a sharing session.
Ask your network operator or service provider for the SIP
profile settings, and save them in your device. Your
network operator or service provider may send you the
settings over the air or give you a list of the needed
parameters.
If you know a recipient’s SIP address, you can enter it on
the person’s contact card. Open Contacts from your
device main menu, and open the contact card (or start a
new card for that person). Select Options > Add detail >
SIP or Share view (the correct option depends on the
network operator). Enter the SIP address in the format
username@domainname (you can use an IP address
instead of a domain name).
If you do not know a SIP address for the contact, you can
also use the already saved phone number of the recipient
including the country code, for example +358, to share
video. If the phone number saved in Contacts does not
include the country code, you can enter the number
including the country code when sending the invitation.
UTMS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your device UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 95.
Share live video and video clips
To receive a sharing session, the recipient must install
Video sharing and configure the required settings on their
compatible mobile device. You and the recipient must
R1113_en.book Page 63 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
64
both be registered to the service before you can start
sharing.
1During an active voice call, select Options > Share
video > Live or Clip.
If you selected Clip, a list of video clips opens. Select a
video clip you want to share and Options > Send
invitation.
2If the recipient has several SIP addresses in the
contacts list, select the SIP address to which you want
to send the invitation.
If the SIP address of the recipient is not available,
enter a SIP address.
If you do not know a SIP address for the contact, enter
the phone number of the recipient including the
country code, if it is not already saved in the Contacts.
3Sharing begins automatically when the recipient
accepts the invitation.
4Select Pause to pause the sharing session. Select
Continue to resume sharing. If you share a video clip,
to rewind and fast forward the clip, scroll left or right.
5To end video sharing, select Stop or close the camera
slider. Video sharing also ends if the active voice call
ends.
Accept an invitation
When someone sends you a share invitation, an invitation
message is displayed showing the sender’s name or SIP
address. If your device is not set to Silent, it rings when
you receive an invitation.
If someone sends you a share invitation and your device is
turned off or you are not within UMTS network coverage,
you will not know that you received an invitation.
When you receive an invitation, select from the following:
Accept—to activate the sharing session.
Reject—to decline the invitation. The sender receives a
message that you rejected the invitation. You can also
press the end key to decline the sharing session and
disconnect the voice call.
To end video sharing, select Stop. Video sharing also ends
if the active voice call ends.
Answer or decline a call
To answer the call, press .
To mute the ringing tone when a call comes in, select
Silence.
If you do not want to answer a call, press . If you have
activated the Call forward > If busy function to forward
calls, declining an incoming call also forwards the call. See
‘Call forwarding’, p. 102.
When you decline an incoming call, you can send a text
message to the caller informing why you cannot answer
R1113_en.book Page 64 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
65
the call. Select Options > Send text message. You can
edit the text before sending it. To set up this option and
write a standard text message, see ‘Call settings’, p. 94.
Answer or decline a video call
When a video call arrives, is displayed.
Tip! You can assign a ringing tone for video calls.
Press and select Profiles.
Press to answer the video call. Allow video image to
be sent to caller? appears on the display. To start sending
live video image, select Yes.
If you do not activate the video call, video sending is not
activated, and you only hear the sound of the caller. A grey
screen is shown in place of the video image. To replace the
grey screen with a still image captured by the camera in
your device, see ‘Call settings’, Image in video call, p. 94.
To end the video call, press .
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated Call waiting in Tools >
Settings > Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see ‘Profiles—set tones’, p. 90.
To answer the waiting call, press . The first call is put
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select Options >
Transfer. To end the active call, press . To end both
calls, select Options > End all calls.
Options during a voice call
Many of the options that you can use during a voice call
are network services. Select Options during a call for some
of the following options: Mute or Unmute, Answer,
Decline, Swap, Hold or Unhold, Activate handset,
Activate loudsp., or Activate handsfree (if a compatible
headset with Bluetooth connectivity is attached), End
active call or End all calls, New call, Conference,
Transfer, and Open active standby. Select from the
following:
Replace—to end an active call and replace it by answering
the waiting call.
Send MMS (in UMTS networks only)—to send an image or
a video in a multimedia message to the other participant
of the call. You can edit the message and change the
recipient before sending. Press to send the file to a
compatible device (network service).
R1113_en.book Page 65 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
66
Send touch tones—to send touch tone strings, for
example, a password. Enter the touch tone string or
search for it in Contacts. To enter a wait character (w) or
a pause character (p), press repeatedly. Select OK to
send the tone.
Tip! You can add touch tones to the Phone number
or Touch tones fields in a contact card.
Options during a video call
Select Options during a video call for the following
options: Enable or Disable (video, audio, or both),
Activate handset (if a compatible headset with Bluetooth
connectivity is attached) or Activate handsfree (when a
compatible headset with Bluetooth connectivity is
attached), Activate loudsp., End active call, Open active
standby, Use main camera/Use secondary camera,
Change image order, Zoom in/Zoom out, and Help.
The available options may vary.
Log
To monitor the phone numbers of missed, received, and
dialed voice calls, press , and select My own > Log>
Recent calls. The device registers missed and received
calls only if the network supports these functions, the
device is switched on, and within the network service area.
To clear all recent call lists, select Options > Clear recent
calls in the recent calls main view. To clear one of the call
logs, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press .
Call timers
To monitor the approximate duration of your incoming and
outgoing calls, press , and select My own > Log> Call
timers.
To set the display of the call timers while a call is active,
select My own > Log> Options > Settings > Show call
duration > Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options > Clear
timers. For this you need the lock code. See ‘Phone and
SIM’, p. 99.
Packet data
To check the amount of data sent and received during
packet data connections, press , and select My own >
R1113_en.book Page 66 Friday, November 25, 2005 12:49 PM
FCC Draft
Make calls
67
Log > Packet data. For example, you may be charged for
your packet data connections by the amount of data sent
and received.
Monitor all communication events
Icons in Log:
Incoming
Outgoing
Missed communication
events
To monitor all voice calls, text
messages, or data and wireless
LAN connections registered by
the device, press , select My
own> Log, and scroll right to
open the general log. For each
communication event, you can see the sender or recipient
name, phone number, name of the service provider, or
access point. You can filter the general log to view just one
type of event, and create new contact cards based on the
log information.
Tip! To view a list of sent messages, press , and
select Messaging > Sent.
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or Web pages are shown as
packet data connections.
To add an unknown phone number from Log to your
contacts, select Options > Add to contacts.
To filter the log, select Options > Filter and a filter.
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select Options >
Clear log. Select Yes to confirm. To remove a single event
from the log, press .
To set the Log duration, select Options > Settings > Log
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select No log, all the log
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view the details of a communication event, in the
general log view scroll to an event, and press .
Tip! In the details view you can copy a phone number
to the clipboard, and paste it to a text message, for
example. Select Options > Copy Number.
Packet data counter and connection timer: To view how
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
incoming or outgoing event indicated by Pack., and select
Options > View details.
R1113_en.book Page 67 Friday, November 25, 2005 12:49 PM
FCC Draft
Services
68
Services
Press , and select Services (network service).
Various service providers maintain pages specifically
designed for mobile devices that you can view with the
Services browser. These pages use the wireless markup
language (WML), extensible hypertext markup language
(XHTML), or hypertext markup language (HTML).
Check the availability of services, pricing, and fees with
your network operator or service provider. Service
providers will also give you instructions on how to use
their services.
Shortcut: To start a connection, press and hold
in the standby mode.
Access point
To access pages, you need service settings for the page
that you want to use. You may receive the settings in a
special text message from the network operator or service
provider that offers the page. See ‘Data and settings’,
p. 48. For more information, contact your network
operator or service provider.
Tip! Settings may be available on the Web site of a
network operator or service provider.
Enter settings manually
1Press , select Tools > Settings > Connection >
Access points, and define the settings for an access
point. Follow the instructions given to you by your
service provider. See ‘Connection’, p. 95.
2Press , and select Services > Options > Bookmark
manager > Add bookmark. Write a name for the
bookmark and the address of the page defined for the
current access point.
3To set the created access point as the default access
point, select Options > Settings > Access point.
Bookmarks view
The bookmarks view opens when you open Services.
Your device may have some bookmarks loaded for sites not
affiliated with Nokia. Nokia does not warrant or endorse
these sites. If you choose to access them, you should take
the same precautions, for security or content, as you would
with any Internet site.
indicates the starting page defined for the default
access point.
R1113_en.book Page 68 Friday, November 25, 2005 12:49 PM
FCC Draft
Services
69
Connection security
If the security indicator is displayed during a
connection, the data transmission between the device and
the Internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content server
(or place where the requested resource is stored) is secure.
The service provider secures the data transmission
between the gateway and the content server.
Select Options > Details > Security to view details about
the connection, encryption status, and information about
server and user authentication.
Security certificates may be required for some services,
such as banking services. For more information, contact
your service provider. See also ‘Certif. management’,
p. 101.
Browse
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To download a page, select a bookmark, or enter the
address in the field ( ).
On a browser page, new links appear underlined in blue
and previously visited links in purple. Images that act as
links have a blue border around them.
To open links and make selections, press .
Shortcut: Use to jump to the end of a page and
to the beginning of a page.
To go to the previous page while browsing, select Back. If
Back is not available, select Options > Navigation
options > History to view a chronological list of the pages
you visited during a browsing session.
To retrieve the latest content from the server, select
Options > Navigation options > Reload.
To save a bookmark, select Options > Save as bookmark.
Tip! To access the bookmarks view while browsing,
press and hold . To return to the browser view,
select Options > Back to page.
To save a page while browsing, select Options >
Advanced options > Save page. You can save pages to
the device memory or compatible memory card (if
inserted), and browse them when offline. To access the
pages later, press in the bookmarks view to open the
Saved pages view.
To enter a new URL address, select Options > Navigation
options > Go to web address.
R1113_en.book Page 69 Friday, November 25, 2005 12:49 PM
FCC Draft
Services
70
To open a sublist of commands or actions for the currently
open page, select Options > Service options.
You can download files that cannot be shown on the
browser page, such as ringing tones, images, operator
logos, themes, and video clips. To download an item, scroll
to the link, and press .
When you start a download, a list of ongoing, paused, and
completed downloads from the current browsing session
is displayed. You can also view the list by selecting
Options > Tools > Downloads. In the list, scroll to an
item, and select Options to pause, resume, or cancel
ongoing downloads, or open, save, or delete completed
downloads.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items can
be provided free, or you can purchase them. Downloaded
items are handled by the respective applications in your
device, for example, a downloaded photo can be saved in
Gallery.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
1To download the item, scroll to the link, and press .
2Select the appropriate option to purchase the item, for
example, “Buy”.
3Carefully read all the information provided.
To continue the download, select Accept. To cancel the
download, select Cancel.
End a connection
To end the connection and view the browser page offline,
select Options > Advanced options > Disconnect, or to
end the connection and close the browser, select
Options > Exit.
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use. The information or services you have
accessed are stored in the cache. To empty the cache,
select Options > Advanced options > Clear cache.
Settings
Select Options > Settings and from the following:
R1113_en.book Page 70 Friday, November 25, 2005 12:49 PM
FCC Draft
Services
71
Access point—Change the default access point. See
‘Connection’, p. 95. Some or all access points may be
preset for your device by your service provider or network
operator, and you may not be able to change, create, edit,
or remove them.
Load imgs. & sounds—Select whether you want to load
images while browsing. If you select No, to load images
later during browsing, select Options > Show images.
Font size—Select the text size.
Default encoding—If text characters are not shown
correctly, you can select another encoding according to
language.
Auto. bookmarks—Enable or disable automatic bookmark
collecting. If you want to continue collecting automatic
bookmarks but hide the folder from the bookmarks view,
select Hide folder.
Screen size—Select what is shown when you are browsing:
Select. keys only or Full screen.
Homepage—Define the home page.
Search page—Define a Web page that is downloaded
when you select Navigation options > Open search page
in the bookmarks view, or when browsing.
Volume—If you want the browser to play sounds
embedded on Web pages, select a volume level.
Rendering—If you want the page layout shown as
accurately as possible when in Small screen mode, select
By quality. If you do not want external cascading style
sheets to be downloaded, select By speed.
Cookies—Enable or disable the receiving and sending of
cookies.
Java/ECMA script—Enable or disable the use of scripts.
Security warnings—Hide or show security notifications.
Confirm touch tones—Select whether you want to
confirm before the device sends touch tones during a
voice call. See also ‘Options during a voice call’, p. 65.
R1113_en.book Page 71 Friday, November 25, 2005 12:49 PM
FCC Draft
Calendar
72
Calendar
Use Calendar to remind you of meetings and
anniversaries, and to keep track of your tasks and other
notes.
Create calendar entries
Shortcut: In the day, week, or month calendar view,
press any key ( — ). An appointment entry opens,
and the characters you enter are added to the Subject
field. In the to-do view, a to-do note entry opens.
1Press , and select
Calendar > Options >
New entry and one of
the following:
Meeting—to remind you
of an appointment that
has a specific date and
time
Memo—to write a
general entry for a day
Anniversary—to remind
you of birthdays or
special dates (entries are repeated every year)
To-do—to remind you of a task that needs doing by a
specific date
2Fill in the fields. To set an alarm, select Alarm > On,
and enter the Alarm time and Alarm date.
To add a description for an appointment or a meeting,
select Options > Add description.
3To save the entry, select Done.
When the calendar alarms for a note, select Silence to turn
off the calendar alarm tone. The reminder text stays on the
screen. To end the calendar alarm, select Stop. To set the
alarm to snooze, select Snooze.
Tip! You can synchronize your calendar with a
compatible PC using Nokia PC Suite. When creating a
calendar entry, set the desired Synchronization option.
Calendar views
Tip! Select Options > Settings to change the starting
day of the week or the view that is shown when you
open the calendar.
In the month view, dates that have calendar entries are
marked with a small triangle in the right bottom corner. In
the week view, memos and anniversaries are placed before
R1113_en.book Page 72 Friday, November 25, 2005 12:49 PM
FCC Draft
Calendar
73
8 a.m. To switch between the month view, week view, day
view, and to-do view, press .
To go to a certain date, select Options > Go to date. To
jump to today, press .
To send a calendar note to a compatible device, select
Options > Send.
To print calendar entries on a compatible Basic Print
Profile (BPP) equipped printer with Bluetooth connectivity
(such as HP Deskjet 450 Mobile Printer or HP Photosmart
8150), select Options > Print.
Manage your calendar entries
Deleting past entries in Calendar saves space in your
device memory.
To delete more than one event at a time, go to the month
view, and select Options > Delete entry > Before date or
All entries.
To mark a task as completed, scroll to it in the to-do view,
and select Options > Mark as done.
Calendar settings
To modify the Calendar alarm tone, Default view, Week
starts on, and Week view title, select Options > Settings.
R1113_en.book Page 73 Friday, November 25, 2005 12:49 PM
FCC Draft
My own
74
My own
Visual Radio
Press , and select My own > Radio. You can use the
application as a traditional FM radio with automatic
tuning and saved stations, or with parallel visual
information related to the radio program on the display, if
you tune to stations that offer Visual Radio service. The
Visual Radio service uses packet data (network service).
You can listen to the FM radio while using other
applications.
If you do not have access to the Visual Radio service, the
operators and radio stations in your area may not support
Visual Radio. The Visual Radio service may not be available
in all areas and countries.
You can normally make a call or answer an incoming call
while listening to the radio. The radio is muted when there
is an active call.
The radio selects the used frequency band based on the
country information received from the network. If this
information is not available, you may be asked to select
the region you are located in, or you can select the region
in the Visual Radio settings. See ‘Settings’, p. 75.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
Press , and select My own > Radio. To start a station
search, select or . To change the frequency
manually, select Options > Manual tuning.
If you have previously saved radio stations, select or
to go to the next or previous saved station, or press
the corresponding number key to select the memory
location of a station.
To adjust the volume, press or . To listen to the radio
using the loudspeaker, select Options > Activate
loudspeaker.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
R1113_en.book Page 74 Friday, November 25, 2005 12:49 PM
FCC Draft
My own
75
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list, select
Options > Save station. To open the list of your saved
stations, select Options > Stations.
To return to the standby mode and leave the FM radio
playing in the background, select Options > Play in
background.
View visual content
To check availability and costs, and to subscribe to the
service, contact your network operator or service provider.
To view available visual content for a tuned station, select
or Options > Start visual service. If the visual service
ID has not been saved for the station, enter it, or select
Retrieve to search for it in the station directory (network
service).
When the connection to the visual service is established,
the display shows the current visual content.
To adjust display settings for the visual content view,
select Options > Display settings.
Saved stations
You can save up to 20 radio stations in the radio. To open
your station list, select Options > Stations.
To listen to a saved station, select Options > Station >
Listen. To view available visual content for a station with
Visual Radio service, select Options > Station > Start
visual service.
To change station details, select Options > Station >
Edit.
Settings
Select Options > Settings and from the following:
Start-up tone—Select whether a tone is played when the
application is started.
Auto-start service—Select Yes to have the Visual Radio
service start automatically when you select a saved
station that offers visual service.
Access point—Select the access point used for the data
connection. You do not need an access point to use the
application as an ordinary FM radio.
Current region—Select the region you are currently
located in. This setting is displayed only if there was no
network coverage when the application was started.
Go to—add shortcuts
Press , and select My own > Go to.
R1113_en.book Page 75 Friday, November 25, 2005 12:49 PM
FCC Draft
My own
76
Default shortcuts are the following: opens Calendar,
opens Inbox, and opens Notes.
IM—instant messaging
Press , and select My own > IM.
Instant messaging (network service) allows you to
converse with other people using instant messages and
join discussion forums (IM groups) with specific topics.
Various service providers maintain IM servers that you can
log in to after you register to an IM service. Service
providers may differ in their support of features.
Select Conversations to start or continue a conversation
with an IM user; IM contacts to create, edit, or view the
online status of your IM contacts; IM groups to start or
continue a group conversation with multiple IM users; or
Record. chats to view a previous instant messaging
session that you saved.
Receive IM settings
You must save the settings to access the service that you
want to use. You may receive the settings in a special text
message from the network operator or service provider
that offers the IM service. See ‘Data and settings’, p. 48.
You can also enter the settings manually. See ‘Instant
messaging server settings’, p. 78.
Connect to an IM server
1To connect to the IM server in use, open IM, and select
Options > Login. To change the IM server in use and
save new IM servers, see ‘Instant messaging server
settings’, p. 78.
2Enter your user ID and password, and press to log
in. You obtain the user ID and password for the IM
server from your service provider.
3To log out, select Options > Logout.
Modify your IM settings
Select Options > Settings > IM settings and from the
following:
Use screen name (shown only if IM groups are supported
by the server)—To enter a nickname, select Yes.
IM presence—To allow others to see if you are online,
select Active for all.
Allow msgs. from—To allow messages from all, select All.
Allow invitats. from—To allow invitations only from your
IM contacts, select IM contacts only. IM invitations are
sent by IM contacts who want you to join their groups.
R1113_en.book Page 76 Friday, November 25, 2005 12:49 PM
FCC Draft
My own
77
Msg. scrolling speed—Select the speed at which new
messages are displayed.
Sort IM contacts—Select how your IM contacts are
sorted: Alphabetically or By online status.
Availabil. reloading—To select how to update information
about whether your IM contacts are online or offline,
select Automatic or Manual.
Offline contacts—Select whether IM contacts with an
offline status are shown in the IM contacts list.
Own message color—Select the color of the instant
messages you send.
Received msg color—Select the color of the instant
messages you receive.
IM alert tone—Change the tone played when you receive
a new instant message.
Search for IM groups and users
To search for groups, in the IM groups view, select
Options > Search. You can search by Group name, Topic,
and Members (user ID).
To search for users, in the IM contacts view, select
Options > New IM contact > Search from server. You
can search by User's name, User ID, Phone number, and
E-mail address.
Join IM groups
The IM groups view shows a list of the IM groups that you
have saved or are currently joined to.
To join a saved IM group, press .
To leave the IM group, select Options > Leave IM group.
Instant messaging
After you join an IM group, you can view the messages
that are exchanged there, and send your own messages.
To send a message, write the message in the message
editor field, and press .
To send a private message to a participant, select
Options > Send private msg..
To reply to a private message sent to you, select the
message and Options > Reply.
To invite IM contacts who are online to join the IM group,
select Options > Send invitation.
To prevent receiving messages from certain participants,
select Options > Blocking options.
Record chats
To record the messages that are exchanged during a
conversation or while you are joined in a IM group, select
Options > Record chat. To stop recording, select
R1113_en.book Page 77 Friday, November 25, 2005 12:49 PM
FCC Draft
My own
78
Options > Stop recording. To view the recorded chats, in
the main view, select Record. chats.
View and start conversations
The Conversations view shows a list of the individual
conversation participants that you have an ongoing
conversation with. Ongoing conversations are
automatically closed when you exit IM.
To view a conversation, scroll to a participant, and press
.
To continue the conversation, write your message, and
press .
To return to the conversations list without closing the
conversation, select Back. To close the conversation,
select Options > End conversation.
To start a new conversation, select Options > New
conversation.
To save a conversation participant to your IM contacts,
select Options > Add to IM contacts.
To send automatic replies to incoming messages, select
Options > Set auto reply on. You can still receive
messages.
IM contacts
In the IM contacts view, you can retrieve instant
messaging contact lists from the server, or add a new
instant messaging contact to a contact list. When you log
in to the server, the previously used instant messaging
contact list is retrieved from the server automatically.
Instant messaging server settings
Select Options > Settings > Server settings. You may
receive the settings in a special text message from the
network operator or service provider that offers the instant
messaging service. You obtain the user ID and password
from your service provider when you register to the service.
If you do not know your user ID or password, contact your
service provider.
Servers—View a list of all defined IM servers.
Default server—Change the IM server to which you want
to connect.
IM login type—To log in automatically when you start IM,
select On app. start-up.
To add a new server to your list of IM servers, select
Servers > Options > New server. Enter the following
settings:
Server name—the name for the instant messaging server
R1113_en.book Page 78 Friday, November 25, 2005 12:49 PM
FCC Draft
My own
79
Access point in use—the access point you want to use for
the server
Web address—the URL address of the IM server
User ID—your user ID
Password—your login password
Games
Press , and select My own and a game. For instructions
on how to play the game, select Options > Help.
R1113_en.book Page 79 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
80
Connectivity
Bluetooth connectivity
You can connect wirelessly to other compatible devices
with wireless Bluetooth technology. Compatible devices
may include mobile phones, computers, and
enhancements such as headsets and car kits. You can use
Bluetooth connectivity to send images, video clips, music
and sound clips, and notes; connect wirelessly to your
compatible PC (for example, to transfer files); connect to
a compatible printer to print images with Image print.
See ‘Image print’, p. 38.
Since devices with Bluetooth technology communicate
using radio waves, your device and the other device do not
need to be in direct line-of-sight. The two devices only
need to be within 10 meters (33 feet) of each other, but
the connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification 1.2
supporting the following profiles: Basic Printing Profile,
Generic Access Profile, Serial Port Profile, Dial-up
Networking Profile, Headset Profile, Handsfree Profile,
Generic Object Exchange Profile, Object Push Profile, File
Transfer Profile, Basic Imaging Profile, SIM Access profile,
and Human Interface Device Profile. To ensure
interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements
for this model. Check with the manufacturers of other
devices to determine their compatibility with this device.
Glossary: A profile corresponds to a service or a
function, and defines how different devices connect.
For example, the Handsfree Profile is used between the
handsfree device and the phone. For devices to be
compatible, they must support the same profiles.
There may be restrictions on using Bluetooth technology in
some locations. Check with your local authorities or service
provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See ‘Security’, p. 99 for more information on
locking the device.
R1113_en.book Page 80 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
81
Settings
Press , and select Connect. > Bluetooth. When you
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change My phone's visibility to
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth—Select On or Off. To connect wirelessly to
another compatible device, first set Bluetooth connectivity
On, then establish a connection.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth technology, select Shown to
all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See ‘Pair devices’, p. 82. Activate the remote
SIM mode from the other device.
When remote SIM mode is on in your Nokia N80, Remote
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by in
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage. However, a wireless LAN connection remains
active during the remote SIM mode.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select Exit rem. SIM mode.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
R1113_en.book Page 81 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
82
Send data using Bluetooth
connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a headset, you can also
transfer files to another compatible device at the same
time.
Bluetooth connectivity indicators
• When is shown in the standby mode, Bluetooth
connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes, write the text, and select Options > Send > Via
Bluetooth.
1Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2Select the item and Options > Send > Via Bluetooth.
Devices with Bluetooth technology within range start
to appear on the display.
Device icons: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop.
3Select the device with which you want to connect.
4If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 82.
5When the connection has been established, Sending
data is shown.
The Sent folder in Messag. does not store messages sent
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired device.
Devices with wireless Bluetooth technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
R1113_en.book Page 82 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
83
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorized—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorized—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection is switched off.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept, is shown, and the item is
placed in the Inbox folder in Messag.. Messages received
through Bluetooth connectivity are indicated by . See
‘Inbox—receive messages’, p. 47.
Switch off Bluetooth connectivity
To switch off Bluetooth connectivity, select Bluetooth >
Off.
Infrared connection
With infrared, you can transfer data such as business
cards, calendar notes, and media files with a compatible
device.
Do not point the IR (infrared) beam at anyone's eye or
allow it to interfere with other IR devices. This device is a
Class 1 laser product.
Send and receive data using infrared
1Make sure that the infrared ports of the sending and
receiving devices are pointing at each other, and that
there are no obstructions between the devices. The
preferable distance between the two devices is up to 1
meter (3 feet).
2The user of the receiving device activates the infrared
port.
R1113_en.book Page 83 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
84
To activate the infrared port of your device to receive
data through infrared, press , and select
Connect. > Infrared.
3The user of the sending device selects the desired
infrared function to start the data transfer.
To send data through infrared, locate the desired file
in an application or the file manager, and select
Options > Send > Via infrared.
If data transfer is not started within 1 minute after the
activation of the infrared port, the connection is cancelled
and must be started again.
All items received through infrared are placed in the Inbox
folder in Messaging. New infrared messages are indicated
by .
When blinks, your device is trying to connect to the
other device or a connection has been lost.
When is shown continuously, the infrared
connection is active, and your device is ready to send and
receive data using its infrared port.
Data cable
Press , and select Connect. > Data cbl.. In Data cable
mode, select what the USB data cable connection is used
for: PC Suite or Data transfer. To have the device ask the
purpose of the connection each time the cable is
connected, select Ask on connection.
PC connections
You can use your device with a variety of PC connectivity
and data communications applications. With Nokia PC
Suite you can, for example, transfer images between your
device and a compatible PC.
Always create the connection from the PC to synchronize
with your device.
Your device as a modem
You can use your device as a modem to send and receive
e-mail, or to connect to the Internet with a compatible PC
by using Bluetooth connectivity, infrared, or a USB data
cable (network service). Detailed installation instructions
can be found in the user guide for Nokia PC Suite.
Tip! When using Nokia PC Suite for the first time, to
connect your device to a compatible PC and to use
Nokia PC Suite, use the Get Connected wizard available
in Nokia PC Suite.
R1113_en.book Page 84 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
85
Connection manager
Press , and select Connect. > Conn mgr. To view the
status of data connections or end connections in GSM and
UMTS network and wireless LAN, select Act. data conn..
To search for wireless LANs available within range, select
Availab. WLAN.
Data connections
In the active connections view, you can see the open data
connections: data calls ( ), packet data connections (
or ), and wireless LAN connections ( ).
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select Options > Disconnect. To close
all open connections, select Options > Disconnect all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection type.
Wireless LAN
The available wireless LAN view shows a list of wireless
LANs within range, their network mode (Infrastructure or
Ad-hoc), and signal strength indicator. is shown for
networks with encryption, and if your device has an
active connection in the network.
To view the details of a network, select Options > Details.
To create an Internet access point in a network, select
Options > Define access point.
Synchronization
Press , and select Connect. > Sync. Sync enables you
to synchronize your notes, calendar, contacts, or e-mail
with various compatible calendar and address book
applications on a compatible computer or on the Internet.
You can also create or edit synchronization settings.
The synchronization application uses SyncML technology
for synchronization. For information on SyncML
compatibility, contact the supplier of the application with
which you want to synchronize your device data.
You may receive synchronization settings in a special text
message. See ‘Data and settings’, p. 48.
Synchronize data
In the Sync main view, you can see the different
synchronization profiles.
R1113_en.book Page 85 Friday, November 25, 2005 12:49 PM
FCC Draft
Connectivity
86
1Select a synchronization profile and Options >
Synchronize. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select
Cancel.
2You are notified when the synchronization is
complete. Select Yes to view the log file showing the
synchronization status and how many entries have
been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
Device manager
Press , and select Connect. > Dev. mgr.. You may
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
Network authentic.—Select if network authentication is
used.
R1113_en.book Page 86 Friday, November 25, 2005 12:49 PM
FCC Draft
Office
87
Office
Calculator
To add, substract, multiply, divide, and calculate square
roots and percentages, press , and select Office >
Calculator.
Note: This calculator has limited accuracy and is
designed for simple calculations.
Converter
To convert measures from one unit to another, press ,
and select Office > Converter.
Converter has limited accuracy, and rounding errors may
occur.
1In the Type field, select the measure you want to use.
2In first Unit field, select the unit from which you want
to convert. In the next Unit field, select the unit to
which you want to convert.
3In the first Amount field, enter the value you want to
convert. The other Amount field changes automatically
to show the converted value.
Set base currency and exchange rates
Select Type > Currency > Options > Currency rates.
Before you can make currency conversions, you must
select a base currency and add exchange rates. The rate of
the base currency is always 1.
Note: When you change base currency, you must
enter new exchange rates because all previously set
exchange rates are cleared.
Notes
To write notes, press , and select Office > Notes. You
can send notes to compatible devices, and save plain text
files (.txt format) that you receive to Notes.
To print a note on a compatible Basic Print Profile (BPP)
equipped printer with Bluetooth connectivity (such as HP
Deskjet 450 Mobile Printer or HP Photosmart 8150), select
Options > Print.
R1113_en.book Page 87 Friday, November 25, 2005 12:49 PM
FCC Draft
Office
88
Recorder
To record voice memos, press , and select Office >
Recorder. To record a telephone conversation, open
Recorder during a voice call. Both parties hear a tone
every 5 seconds during recording.
Quickoffice
To use the Quickoffice applications, press , and select
Office > Quickoffice. A list of files in the .doc, .xls, .ppt,
and .txt file formats saved in the device opens.
To open a file in its respective application, press . To
sort files, select Options > Sort files.
To open Quickword, Quicksheet, or Quickpoint, press
to reach the desired view.
Quickword
With Quickword, you can view native Microsoft Word
documents on the display of your device. Quickword
supports colors, bold, italics, and underline.
Quickword supports the viewing of documents saved in
.doc format in Microsoft Word 97, 2000, and XP, and Palm
eBooks in .doc format. Not all variations or features of the
mentioned file formats are supported.
See also ‘More information’, p. 89.
View Word documents
To move in the document, use the scroll key.
To search the document for text, select Options > Search.
You can also select Options and from the following:
Go to—to move to the start, end, or selected position
within the document
Zoom—to zoom in or out
Start Autoscroll—to start automatic scrolling through the
document. To stop scrolling, press .
Quicksheet
With Quicksheet, you can read Microsoft Excel files on the
display of your device.
Quicksheet supports the viewing of spreadsheet files
saved in .xls format in Microsoft Excel 97, 2000, 2003, and
XP. Not all variations or features of the mentioned file
formats are supported.
See also ‘More information’, p. 89.
R1113_en.book Page 88 Friday, November 25, 2005 12:49 PM
FCC Draft
Office
89
View spreadsheets
To move around in the spreadsheet, use the scroll key.
To switch between worksheets, select Options > Pan.
To search the spreadsheet for a text within a value or
formula, select Options > Find.
To change how the spreadsheet is displayed, select
Options and from the following:
Zoom—to zoom in or out
Freeze panes—to keep the highlighted row, column, or
both visible while you move in the spreadsheet
Resize—to adjust the size of columns or rows
Quickpoint
With Quickpoint, you can view Microsoft PowerPoint
presentations on the display of your device.
Quickpoint supports the viewing of presentations created
in .ppt format in Microsoft PowerPoint 97, 2000, and XP.
Not all variations or features of the mentioned file formats
are supported.
See also ‘More information’, p. 89.
View presentations
To move between the slide, outline, and the notes view,
press or .
To move to the next or previous slide in the presentation,
press or .
To view the presentation in full screen, select Options >
Full screen.
To expand items in the presentation outline in the outline
view, select Options > Expand entry.
More information
If you experience problems with Quickword, Quicksheet,
or Quickpoint, visit www.quickoffice.com for more
information. Support is also available by sending an
e-mail to supportS60@quickoffice.com.
R1113_en.book Page 89 Friday, November 25, 2005 12:49 PM
FCC Draft
Customize your device
90
Customize your device
The open applications, and folders that have applications
open, are indicated by a small icon ( ) in the main
menu.
• To use the standby display for fast access to your most
frequently used applications, see ‘Active standby
mode’, p. 92.
• To change the standby
mode background image
or what is shown in the
screen saver, see ‘Change
the look of your device’,
p. 91.
• To customize the ringing
tones, see ‘Profiles—set
tones’, p. 90 and ‘Add
ringing tones for
contacts’, p. 58.
• To change the shortcuts
assigned for the different presses of the scroll key and
left and right selection keys in the standby mode, see
‘Standby mode’, p. 94.
• To change the clock shown in the standby mode, press
, and select Clock > Options > Settings > Clock
type > Analog or Digital.
• To change the welcome note to an image or animation,
press , and select Tools > Settings > Phone >
General > Welcome note / logo.
• To change the main menu view, in the main menu,
select Options > Change view > Grid or List.
• To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
can move less used applications into folders, and place
applications that you use more often into the main
menu.
Profiles—set tones
To set and customize the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press , and select Tools > Profiles.
To change the profile, press in the standby mode.
Scroll to the profile you want to activate, and select OK.
To modify a profile, press , and select Tools > Profiles.
Scroll to the profile, and select Options > Customize.
Scroll to the setting you want to change, and press to
open the choices. Tones stored on the memory card are
indicated with . You can scroll through the tone list
R1113_en.book Page 90 Friday, November 25, 2005 12:49 PM
FCC Draft
Customize your device
91
and listen to each one before you make your selection. To
stop the sound, press any key.
When you choose a tone, Tone downloads (network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a Web page to
download tones.
If you want the caller’s name to be said when your device
rings, select Options > Customize, and set Say caller's
name to On. The caller’s name must be saved in Contacts.
To create a new profile, select Options > Create new.
Offline profile
The Offline profile lets you use the device without
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Warning: In the offline profile you cannot make (or
receive) any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first activate
the phone function by changing profiles. If the device
has been locked, enter the lock code.
When you have activated the Offline profile, you can still
use the wireless LAN (if available), for example, to read
your e-mail or browse on the Internet. Remember to
comply with any applicable safety requirements when
establishing and using a wireless LAN connection. See
‘Wireless LAN’, p. 14.
To leave the Offline profile, press the power key, and
select another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength). If a Bluetooth connection is activated before
entering the Offline profile, it will be deactivated. A
Bluetooth connection is automatically reactivated after
leaving the Offline profile. See ‘Settings’, p. 81.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Themes. The active
theme is indicated by . In Themes you can group
together elements from other themes or select images
from the Gallery to customize themes further. The themes
on the memory card (if inserted) are indicated by . The
themes on the memory card are not available if the
memory card is not inserted in the device. If you want to
use the themes saved in the memory card without the
memory card, save the themes in the device memory first.
R1113_en.book Page 91 Friday, November 25, 2005 12:49 PM
FCC Draft
Customize your device
92
To open a browser connection and download more
themes, select Theme downloads.
To activate a theme, scroll to it, and select Options >
Apply. To preview a theme before activating it, select
Options > Preview.
To edit themes, scroll to a theme, and select Options >
Edit to change the Wallpaper and Power saver settings.
To restore the selected theme to its original settings,
select Options > Restore orig. theme when you edit a
theme.
Active standby mode
Use your standby display for
fast access to your most
frequently used applications.
By default, the active
standby mode is on.
Press , select Tools >
Settings > Phone >
Standby mode > Active
standby, and press to
switch the active standby on
or off.
The active standby display is shown with default
applications across the top of the screen, and calendar,
to-do, and player events listed below.
Scroll to an application or event, and press .
The standard scroll key shortcuts available in the standby
mode cannot be used when the active standby mode is on.
To change the default applications shortcuts, press ,
select Tools > Settings > Phone > Standby mode > Active
standby apps., and press .
Some shortcuts may be fixed, and you are not able to
change them.
R1113_en.book Page 92 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
93
Tools
Media key
To open the shortcut assigned to the multimedia key, press
and hold . To open a list of multimedia applications,
press . To open the desired application, use the scroll
key. To exit the list without selecting an application, press
.
To change the shortcuts, press , and scroll down. To
change the default shortcut, select Multimedia key. To
change the applications that are shown when you press
, select Top, Left, Middle, and Right and the
application.
Some shortcuts may be fixed, and you are not able to
change them.
Settings
To change settings, press , and select Tools > Settings.
To open a settings group, press . Scroll to a setting you
want to change, and press .
Some settings may be preset for the device by your
network operator or service provider, and you may not be
able to change them.
Phone
General
Phone language—Changing the language of the display
texts in your device also affects the format used for date
and time and the separators used, for example, in
calculations. Automatic selects the language according to
the information on your SIM card. After you change the
display text language, the device restarts.
Changing the settings for Phone language or Writing
language affects every application in your device, and the
change remains effective until you change these settings
again.
Writing language—Changing the language affects the
characters and special characters available when writing
text and the predictive text dictionary used.
R1113_en.book Page 93 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
94
Predictive text—Set the predictive text input On or Off
for all editors in the device. The predictive text dictionary
is not available for all languages.
Welcome note / logo—The welcome note or logo is
displayed briefly each time you switch on the device.
Select Default to use the default image, Text to write a
welcome note, or Image to select an image from Gallery.
Orig. phone settings—You can reset some of the settings
to their original values. To do this, you need the lock code.
See ‘Security’, ‘Phone and SIM’, p. 100. After resetting, the
device may take a longer time to power on. Documents
and files are unaffected.
Standby mode
Active standby—Use shortcuts to applications in the
standby mode. See ‘Active standby mode’, p. 92.
Left selection key—Assign a shortcut to the left selection
key ( ) in the standby mode.
Right selection key—Assign a shortcut to the right
selection key ( ) in the standby mode.
Active standby apps.—Select the application shortcuts
you want to appear in the active standby. This setting is
only available if Active standby is on.
You can also assign keypad shortcuts for the different
presses of the scroll key. The scroll key shortcuts are not
available if the active standby is on.
Operator logo—This setting is only available if you have
received and saved an operator logo. Select Off if you do
not want the logo to be shown.
Display
Brightness—Adjust the basic brightness level of the display
to lighter or darker. However, in extreme light conditions,
the brightness of the display is automatically adjusted.
Power saver time-out—Select the time-out period after
which the power saver is activated.
Light time-out—Select a time-out after which the
backlight of the display is switched off.
Sleep mode—Select whether the display is switched off to
save battery power 20 minutes after the power saver is
activated. When the display is switched off, a LED blinks to
indicate that the device is powered on.
Call settings
Send my caller ID—You can set your phone number to be
displayed to (Yes) or hidden from (No) the person to whom
you are calling, or the value may be set by your network
operator or service provider when you make a subscription
(Set by network) (network service).
R1113_en.book Page 94 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
95
Call waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated (Check status).
Reject call with SMS—Select Yes to send a text message
to a caller informing why you could not answer the call.
See ‘Answer or decline a call’, p. 64.
Message text—Write a text to be sent in a text message
when you decline a call.
Image in video call—If video is not sent during a video call,
you can select a still image to be displayed instead.
Automatic redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press .
Summary after call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
1-touch dialing—Select On, and the numbers assigned to
the 1-touch dialing keys ( - ) can be dialed by
pressing and holding the key. See also ‘1-touch dial a
phone number’, p. 60.
Anykey answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and .
Line in use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change—To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
R1113_en.book Page 95 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
96
points can share a data connection. In the UMTS network,
data connections remain active during voice calls.
You can also use a wireless LAN data connection. See
‘Wireless LAN’, p. 14. Only one connection in one wireless
LAN can be active at a time.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
and connect to the Internet
Check the type of access point you need with your service
provider for the service you want to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Access points
You may receive access point settings in a message from
a service provider. See ‘Data and settings’, p. 48. Some or
all access points may be preset for your device by your
service provider or network operator, and you may not be
able to change, create, edit, or remove them. indicates
a protected access point.
indicates a packet data access point, and a
wireless LAN access point.
Tip! To create an Internet access point in a wireless
LAN, press , and select Connect. > Conn mgr >
Availab. WLAN > Options > Define access point.
To create a new access point, select Options > New access
point. To edit the settings of an access point, select
Options > Edit. Follow the instructions from your service
provider.
Connection name—Enter a descriptive name for the
connection.
Data bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name—You obtain the access point name
from your network operator or service provider.
R1113_en.book Page 96 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
97
User name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Authentication—Select Normal or Secure.
Homepage—Depending on the access point you are setting
up, enter the Web address or the address of the multimedia
messaging center.
Select Options > Advanced settings to change the
following settings:
Network type—Select the Internet protocol type to use:
IPv4 settings or IPv6 settings. The other settings depend
on the selected network type.
Phone IP address (for IPv4 only)—Enter the IP address of
your device.
DNS address—In Primary name serv.:, enter the IP address
of the primary DNS server. In Second. name server:, enter
the IP address of the secondary DNS server. Contact your
Internet service provider to obtain these addresses.
Proxy serv. address—Define the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Wireless LAN
Follow the instructions from your service provider.
WLAN netw. name—Select Enter manually or Search for
netw.. If you select an existing network, WLAN netw.
mode and WLAN security mode are determined by the
settings of its access point device.
Hide WLAN network—Select whether the network name
is shown.
WLAN netw. mode—Select Ad-hoc to create an ad hoc
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
WLAN security mode—Select the encryption used: WEP,
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open network, no encryption is used. The WEP,
802.1x, and WPA functions can be used only if the
network supports them.
WLAN security sett.—Enter the settings for the selected
security mode:
Security settings for WEP:
Wep key in use—Select the WEP key number. You can
create up to four WEP keys. The same settings must be
entered on the wireless LAN access point device.
R1113_en.book Page 97 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
98
Authentication type—Select Open or Shared for the
authentication type between your device and the wireless
LAN access point device.
WEP key settings—Enter WEP encryption (length of the
key), WEP key format (ASCII or Hexadecimal), and WEP
key (the WEP key data in the selected format).
Security settings for 802.1x and WPA/WPA2:
WPA mode—Select the means of authentication: EAP to
use an extensible authentication protocol (EAP) plug-in,
or Pre-shared key to use a password. Complete the
appropriate settings:
EAP plug-in settings (only for EAP)—Enter the settings as
your service provider instructs.
Pre-shared key (only for Pre-shared key)—Enter a
password. The same password must be entered on the
wireless LAN access point device.
TKIP encryption (only for WPA/WPA2)—Select whether
Temporal Key Integrity Protocol (TKIP) is used.
Homepage—Define a home page.
Select Options > Advanced settings and from the
following:
IPv4 settings: Phone IP address (the IP address of your
device), Subnet mask (the subnet IP address), Default
gateway (the gateway), and DNS address—enter the IP
addresses of the primary and secondary DNS server.
Contact your Internet service provider for these addresses.
IPv6 settings > DNS address—Select Automatic, Well-
known, or User defined.
Ad-hoc channel (only for Ad-hoc)—To enter a channel
number (1-11) manually, select User defined.
Proxy serv. address—Enter the address for the proxy
server.
Proxy port number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data conn.—If you select When available and you
are in a network that supports packet data, the device
registers to the packet data network. Starting an active
packet data connection (for example, to send and receive
e-mail) is quicker. If there is no packet data coverage, the
device periodically tries to establish a packet data
connection. If you select When needed, the device uses a
packet data connection only if you start an application or
action that needs it.
Access point—The access point name is needed to use your
device as a packet data modem to your computer.
R1113_en.book Page 98 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
99
Wireless LAN
Show availability—Select whether is displayed when
a wireless LAN is available.
Scan for networks—If you set Show availability to Yes,
select how often the device searches for available wireless
LANs and updates the indicator.
To view advanced settings, select Options > Advanced
settings. Changing wireless LAN advanced settings is not
recommended.
Configs.
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your (U)SIM card. You can
save these settings to your device, view, or delete them in
Configs..
SIP settings
SIP (Session Initiation Protocol) settings are needed for
certain network services using SIP, such as video sharing.
You may receive the settings in a special text message
from your network operator or service provider. You can
view, delete, or create these setting profiles in SIP
settings.
Date and time
See ‘Clock settings’, p. 14, and language settings in
‘General’, p. 93.
Security
Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See ‘Glossary of PIN and
lock codes’, p. 100.
PIN code, PIN2 code, and Lock code—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. If you forget any of these
codes, contact your service provider. See ‘Glossary of PIN
and lock codes’, p. 100.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks. To
turn off the autolock period, select None.
R1113_en.book Page 99 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
100
To unlock the device, enter the lock code.
When the device is locked, calls still may be possible to
the official emergency number programmed into your
device.
Tip! To lock the device manually, press . A list of
commands opens. Select Lock phone.
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognized as the owner’s cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network
service).
When calls are limited to closed user groups, calls may be
possible to the official emergency number programmed
into your device.
Confirm SIM services—You can set the device to display
confirmation messages when you are using a SIM card
service (network service).
Glossary of PIN and lock codes
If you forget any of these codes, contact your service
provider.
Personal identification number (PIN) code—This code
protects your SIM card against unauthorized use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
UPIN code—This code may be supplied with the USIM card.
The USIM card is an enhanced version of the SIM card and
is supported by UMTS mobile phones.
PIN2 code—This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
Lock code (also known as security code)—This code (5
digits) can be used to lock the device to avoid unauthorized
use. The factory setting for the lock code is 12345. To
avoid unauthorized use of your device, change the lock
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code, contact
your service provider.
Personal unblocking key (PUK) code and PUK2 code—These
codes (8 digits) are required to change a blocked PIN code
or PIN2 code, respectively. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is
in your device.
UPUK code—This code (8 digits) is required to change a
blocked UPIN code. If the code is not supplied with the
USIM card, contact the operator whose USIM card is in
your device.
R1113_en.book Page 100 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
101
Certif. management
Digital certificates do not guarantee safety; they are used
to verify the origin of software.
In the certificate management main view, you can see a
list of authority certificates that are stored in your device.
Press to see a list of personal certificates, if available.
Digital certificates should be used if you want to connect
to an online bank or another site or remote server for
actions that involve transferring confidential information.
They should also be used if you want to reduce the risk of
viruses or other malicious software and be sure of the
authenticity of software when downloading and installing
software.
Important: Even if the use of certificates makes the
risks involved in remote connections and software
installation considerably smaller, they must be used
correctly in order to benefit from increased security. The
existence of a certificate does not offer any protection by
itself; the certificate manager must contain correct,
authentic, or trusted certificates for increased security to
be available. Certificates have a restricted lifetime. If
Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the
current date and time in your device are correct.
View certificate details—check authenticity
You can only be sure of the correct identity of a server
when the signature and the period of validity of a server
certificate have been checked.
You are notified if the identity of the server is not
authentic or if you do not have the correct security
certificate in your device.
To check certificate details, scroll to a certificate, and
select Options > Certificate details. When you open
certificate details, the validity of the certificate is checked,
and one of the following notes may be displayed:
•Certificate not trusted—You have not set any
application to use the certificate. See ‘Change the trust
settings’, p. 101.
•Expired certificate—The period of validity has ended
for the selected certificate.
•Certificate not valid yet—The period of validity has
not yet begun for the selected certificate.
•Certificate corrupted—The certificate cannot be used.
Contact the certificate issuer.
Change the trust settings
Before changing any certificate settings, you must make
sure that you really trust the owner of the certificate and
that the certificate really belongs to the listed owner.
Scroll to an authority certificate, and select Options >
Trust settings. Depending on the certificate, a list of the
R1113_en.book Page 101 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
102
applications that can use the selected certificate is
shown. For example:
•Symbian installation: Yes—The certificate is able to
certify the origin of a new Symbian operating system
application.
•Internet: Yes—The certificate is able to certify servers.
•App. installation: Yes—The certificate is able to
certify the origin of a new JavaTM application.
Select Options > Edit trust setting to change the value.
Call forwarding
Call forwarding allows you to forward your incoming
calls to your voice mailbox or another phone number. For
details, contact your service provider.
Select which calls you want to forward and the desired
forwarding option. To forward voice calls when your
number is busy or when you decline incoming calls, select
If busy. Set the option on (Activate) or off (Cancel), or
check whether the option is activated (Check status).
Several forwarding options can be active at the same
time. When all calls are forwarded, is shown in
the standby mode.
Call restriction and call forwarding cannot be active at the
same time.
Call restriction
Call restriction (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the restriction password from your
service provider.
Select the desired restriction option, and set it on
(Activate) or off (Cancel), or check whether the option is
active (Check status). Call restriction affects all calls,
including data calls.
Call restriction and call forwarding cannot be active at the
same time.
When calls are restricted, calls may be possible to the
official emergency number programmed into your device.
Network
Your device can automatically switch between the GSM
and UMTS networks. The GSM network is indicated with
in the standby mode. The UMTS network is indicated
with .
Network mode (shown only if supported by the network
operator)—Select which network to use. If you select Dual
mode, the device uses the GSM or UMTS network
R1113_en.book Page 102 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
103
automatically, according to the network parameters and
the roaming agreements between the network operators.
Contact your network operator for more details.
Operator selection—Select Automatic to set the device to
search for and select one of the available networks, or
Manual to manually select the network from a list of
networks. If the connection to the manually selected
network is lost, the device sounds an error tone and asks
you to reselect a network. The selected network must have
a roaming agreement with your home network, that is, the
operator whose SIM card is in your device.
Glossary: A roaming agreement is an agreement
between two or more network service providers to
enable the users of one service provider to use the
services of other service providers.
Cell info display—Select On to set the device to indicate
when it is used in a cellular network based on microcellular
network (MCN) technology and to activate cell info
reception.
Enhancement
In the standby mode, indicates a headset is connected,
and that the headset is unavailable, or a Bluetooth
connection to a headset is lost. indicates a loopset is
connected and that a TTY is connected.
Select Headset, Loopset, TTY, Bluetooth handsfree, or
Music stand and from the following:
Default profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See ‘Profiles—set tones’, p. 90.
Automatic answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
Ringing type is set to Beep once or Silent, automatic
answer is disabled. Automatic answer is not available for
TTY.
Lights—Set whether lights remain on, or are switched off
after the time-out. This setting is not available for all
enhancements.
If you are using a TTY, you must activate it on your device.
Press , and select Tools > Settings > Enhancement >
TTY > Use TTY > Yes.
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see ‘Voice dialing’, p. 60.
To activate enhanced voice commands for starting
applications and profiles, you must open the Voice cm.
R1113_en.book Page 103 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
104
application and its Profiles folder. Press , and select
Tools > Voice cm. > Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold in the standby mode,
and say a voice command. The voice command is the
name of the application or profile displayed in the list.
To add more applications to the list, select Options > New
application. To add a second voice command that can be
used to start the application, select Options > Change
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select Options >
Playback.
To change voice command settings, select Options >
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select Synthesizer > Off. To reset voice
recognition learning, for example, when the main user of
the device has changed, select Reset voice adapts..
Application manager
Press , and select Tools > App. mgr.. You can install
two types of applications and software to your device:
•J2ME
TM applications based on Java technology with the
extension .jad or .jar ( ).
• Other applications and software suitable for the
Symbian operating system ( ). The installation files
have the .sis extension. Only install software
specifically designed for your Nokia N80. Software
providers will often refer to the official model number
of this product: the Nokia N80-1.
Installation files may be transferred to your device from a
compatible computer, downloaded during browsing, or
sent to you in a multimedia message, as an e-mail
attachment, or using Bluetooth connectivity or infrared.
You can use Nokia Application Installer in Nokia PC Suite
to install an application to your device. If you use
Microsoft Windows Explorer to transfer a file, save the file
to a compatible memory card (local disk).
Install applications and software
indicates a .sis application, a Java application,
that the application is not fully installed,and that the
application is installed on the memory card.
Important: Only install and use applications and
other software from sources that offer adequate security
and protection against harmful software.
Before installation, note the following:
R1113_en.book Page 104 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
105
• To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
• To display the security certificate details of the
application, select Options > View certificate. See
‘Certif. management’, p. 101.
• If you install a file that contains an update or repair to
an existing application, you can only restore the
original application if you have the original installation
file or a full back-up copy of the removed software
package. To restore the original application, remove the
application, and install the application again from the
original installation file or the back-up copy.
• The .jar file is required for installing Java applications.
If it is missing, the device may ask you to download it.
If there is no access point defined for the application,
you are asked to select one. When you are downloading
the .jar file, you may need to enter a user name and
password to access the server. You obtain these from
the supplier or manufacturer of the application.
1To locate an installation file, press , and select
Tools > App. mgr.. Alternatively, search the device
memory or a memory card (if inserted) in File mgr., or
open a message in Messag. > Inbox that contains an
installation file.
2In App. mgr., select Options > Install. In other
applications, scroll to the installation file, and press
to start the installation.
During installation, the device shows information
about the progress of the installation. If you are
installing an application without a digital signature or
certification, the device displays a warning. Continue
installation only if you are sure of the origin and
contents of the application.
To start an installed application, locate it in the menu, and
press .
To start a network connection and to view extra
information about the application, select Options > Go to
web address, if available.
To see what software packages are installed or removed
and when, select Options > View log.
To send your installation log to a help desk so that they
can see what is installed or removed, select Options >
Send log > Via text message or Via e-mail (available
only if the correct e-mail settings are in place).
Important: Your device can only support one
antivirus application. Having more than one application
with antivirus functionality could affect performance and
operation or cause the device to stop functioning.
Remove applications and software
Scroll to a software package, and select Options >
Remove. Select Yes to confirm.
R1113_en.book Page 105 Friday, November 25, 2005 12:49 PM
FCC Draft
Tools
106
If you remove software, you can only reinstall it if you
have the original software package or a full backup of the
removed software package. If you remove a software
package, you may no longer be able to open documents
created with that software.
Note: If another software package depends on the
software package that you removed, the other
software package may stop working. Refer to the
documentation of the installed software package for
details.
Settings
Select Options > Settings and from the following:
Online certif. check—Select to check the online
certificates before installing an application.
Default web address—Set the default address used when
checking online certificates.
Some Java applications may require a phone call, a
message to be sent, or a network connection to a specific
access point for downloading extra data or components.
In the App. mgr. main view, scroll to an application, and
select Options > Suite settings to change settings
related to that specific application.
Activation keys for
copyright-protected files
To view the digital rights activation keys stored in your
device, press , and select Tools > Actv. keys and from
the following:
Valid keys—View keys that are connected to one or more
media files and keys whose validity period has not started
yet.
Invalid keys—View keys that are not valid; the time period
for using the media file is exceeded or there is a protected
media file in the device but no connected activation key.
Not in use—View keys that have no media files connected
to them in the device.
To buy more usage time or extend the usage period for a
media file, select an invalid activation key and Options >
Activate content. Activation keys cannot be updated if
Web service message reception is disabled. See ‘Web
service messages’, p. 49.
To view detailed information, such as the validity status
and ability to send the file, scroll to an activation key, and
press .
R1113_en.book Page 106 Friday, November 25, 2005 12:49 PM
FCC Draft
Troubleshooting: Q&A
107
Troubleshooting: Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the lock
code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network operator.
For information about passwords, contact your access
point provider, for example, a commercial Internet service
provider (ISP), service provider, or network operator.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Scroll to the application, and press to close the
application.
Bluetooth connectivity
Q: Why can’t I find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
Q: Why can’t I end a Bluetooth connection?
A: If another device is connected to your device, you can
either end the connection using the other device or by
deactivating Bluetooth connectivity. Select Connect. >
Bluetooth > Off.
Browser services
Q: What do I do if the following message is displayed: No
valid access point defined. Define one in Services
settings.?
A: Insert the correct browser settings. Contact your service
provider for instructions.
Camera
Q: Why do images look smudgy?
A: Remove the protective plastic films covering the display
and camera. Ensure that the camera lens protection
window is clean.
Display
Q: Why do missing, discolored, or bright dots appear on the
screen every time I turn on my device?
A: This is a characteristic of this type of display. Some displays
may contain pixels or dots that remain on or off. This is
normal, not a fault.
Home network (UPnP)
R1113_en.book Page 107 Friday, November 25, 2005 12:49 PM
FCC Draft
Troubleshooting: Q&A
108
Q: Why can’t the other device see the files stored on my
device?
A: Make sure that you have configured the home network
settings, Content sharing is turned on in your device, and
the other device is UPnP compatible.
Log
Q: Why does the log appear empty?
A: You may have activated a filter, and no communication
events fitting that filter have been logged. To see all
events, select My own > Log > Options > Filter > All
communication.
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messag.
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call
cost timers, game scores, or any other data, go to the
respective application to remove the data. If you are deleting
multiple items and one of the following notes are shown: Not
enough mem-ory to perform operation. Delete some data
first. or Memory low. Delete some data., try deleting items
one by one (starting from the smallest item).
Q: How can I save my data before deleting it?
A: Save your data using one of the following methods:
• Use Nokia PC Suite to make a backup copy of all data to a
compatible computer.
• Send images to your e-mail address, then save the images
to your computer.
• Send data using Bluetooth connectivity to a compatible
device.
• Store data on a compatible memory card.
Messaging
Q: Why can’t I select a contact?
A: The contact card does not have a phone number or an
e-mail address. Add the missing information to the contact
card in Contacts.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume, select File manager > Options > Memory
details.
Q: The note Retrieving message is shown briefly. What is
happening?
R1113_en.book Page 108 Friday, November 25, 2005 12:49 PM
FCC Draft
Troubleshooting: Q&A
109
A: The device is trying to retrieve a multimedia message from
the multimedia messaging center.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in phone
numbers or addresses. Select Messaging > Options >
Settings > Multim. msg..
Q: How can I end the data connection when the device starts
a data connection again and again?
A: To stop the device from making a data connection, select
Messaging and one of the following:
On receiving msg. > Defer retrieval—To have the
multimedia messaging center save the message to be
retrieved later, for example, after you have checked the
settings. After this change, the device still needs to send
information notes to the network. To retrieve the message
now, select Retr. immediately.
On receiving msg. > Reject message—To reject all
incoming multimedia messages. After this change, the
device needs to send information notes to the network, and
the multimedia messaging center deletes multimedia
messages that are waiting to be sent to you.
Multimedia recept. > Off—To ignore all incoming
multimedia messages. After this change, the device does
not make any network connections related to multimedia
messaging.
PC connectivity
Q: Why do I have problems in connecting the device to my PC?
A: Make sure that Nokia PC Suite is installed and running on
your PC. See the user guide for Nokia PC Suite on the
CD-ROM. For further information on how to use Nokia PC
Suite, see the help function on Nokia PC Suite or visit the
support pages at www.nokia.com.
Q: Can I use my device as a fax modem with a compatible PC?
A: You cannot use your device as a fax modem. However, with
call forwarding (network service), you can forward
incoming fax calls to another phone number.
Wireless LAN
Q: Why can't I see a wireless LAN (WLAN) access point even
though I know I'm within its range?
A: It may be that the WLAN access point uses a hidden service
set identifier (SSID). You can only access networks that use
a hidden SSID if you know the correct SSID and have
created a WLAN Internet access point for the network on
your Nokia device.
Q: How do I switch wireless LAN (WLAN) off on my Nokia
device?
A: You cannot switch off WLAN on your Nokia device. To
reduce battery consumption, you can specify that your
Nokia device does not scan for available networks.
To turn off the background scan:
1Press , and select Tools > Settings > Connection >
Wireless LAN.
2Change the value of Scan for networks to Never.
3To save your changes, press Done.
R1113_en.book Page 109 Friday, November 25, 2005 12:49 PM
FCC Draft
Troubleshooting: Q&A
110
When Scan for networks is set to Never, your Nokia device
still listens to available networks, and you can use available
WLAN networks as usual.
R1113_en.book Page 110 Friday, November 25, 2005 12:49 PM
FCC Draft
Enhancements
111
Enhancements
If you want to enhance phone
functionality, a range of
enhancements is available for
you. You can select any of these
items to help accommodate your
specific communication needs.
For availability of these and other enhancements, contact
your dealer.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from a DC-4, AC-3, or AC-4 charger, and from
an AC-1, ACP-8, ACP-9, ACP-12, ACH-8, ACH-9, or
ACH-12 charger when used with the CA-44 charger
adapter.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty and may be
dangerous.
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
A few practical rules about accessories and
enhancements.
• Keep all accessories and enhancements out of the
reach of small children.
• When you disconnect the power cord of any accessory
or enhancement, grasp and pull the plug, not the cord.
• Check regularly that enhancements installed in a
vehicle are mounted and are operating properly.
• Installation of any complex car enhancements must be
made by qualified personnel only.
Power
• Battery, 820 mAh, Li-Ion (BL-5B)
• Travel Charger (AC-4)
• Compact Charger (AC-3)
• Mobile Charger (DC-4)
• Charger Adapter (CA-44)
Data
• Connectivity Cable (CA-53)
• Wireless GPS Module (LD-1W)
• Wireless Keyboard (SU-8W)
• Digital Pen (SU-1B)
• 128 MB miniSD Card (MU-17)
R1113_en.book Page 111 Friday, November 25, 2005 12:49 PM
FCC Draft
Enhancements
112
Audio
• Fashion Stereo Headset (HS-3)
• Headset (HS-5)
• Boom Headset (HDB-4)
• Classic Stereo Headset (HS-23)
• Activity Headset (HS-8)
• Wireless Clip-on Headset (HS-21W)
• Wireless Boom Headset (HS-4W)
• Wireless Headset (HDW-3)
• Wireless Headset (HS-11W)
• Wireless Image Headset (HS-13W)
• Basic Wireless Headset (HS-26W)
• Music Stand (MD-1)
• Audio Adapter (AD-15)
Accessibility
• Inductive Loopset (LPS-4)
• TTY Adapter (HDA-10)
Car
• Headrest Handsfree (BHF-3)
• Plug-in Car Handsfree (HF-3)
• Plug-in Wireless Car Handsfree (HF-6W)
• Advanced Car Kit (CK-7W)
• Car Kit (CK-10U)
• Universal Mobile Holder (CR-39)
R1113_en.book Page 112 Friday, November 25, 2005 12:49 PM
FCC Draft
Battery information
113
Battery information
Charging and discharging
Your device is powered by a rechargeable battery. The full
performance of a new battery is achieved only after two or
three complete charge and discharge cycles. The battery can
be charged and discharged hundreds of times but it will
eventually wear out. When the talk and standby times are
noticeably shorter than normal, replace the battery. Use only
Nokia approved batteries, and recharge your battery only with
Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if
the battery has not been used for a prolonged period, it may
be necessary to connect the charger then disconnect and
reconnect it to begin charging the battery.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
lifetime. If left unused, a fully charged battery will lose its
charge over time.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the display
or before any calls can be made.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting
can occur when a metallic object such as a coin, clip, or pen
causes direct connection of the positive (+) and negative (-)
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed
car in summer or winter conditions, will reduce the capacity
and lifetime of the battery. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the
battery is fully charged. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged. Dispose of batteries
according to local regulations. Please recycle when possible.
Do not dispose as household waste.
The BL-5B battery provides up to X hours of talk time and up
to X hours of standby time. Battery talk and standby times are
estimates only and depend on signal strength, network
conditions, features used, battery age and condition,
temperatures to which battery is exposed, and many other
factors. The amount of time a phone is used for calls will
affect its standby time. Likewise, the amount of time that the
R1113_en.book Page 113 Friday, November 25, 2005 12:49 PM
FCC Draft
Battery information
114
phone is turned on and in standby mode will affect its talk
time.
Nokia battery authentication
guidelines
Always use original Nokia batteries for your safety. To check
that you are getting an original Nokia battery, purchase it
from an authorized Nokia dealer, look for the Nokia Original
Enhancements logo on the packaging and inspect the
hologram label using the following steps:
Successful completion of the four steps is not a total
assurance of the authenticity of the battery. If you have any
reason to believe that your battery is not an authentic original
Nokia battery, you should refrain from using it, and take it to
the nearest authorized Nokia service point or dealer for
assistance. Your authorized Nokia service point or dealer will
inspect the battery for authenticity. If authenticity cannot be
verified, return the battery to the place of purchase.
Authenticate hologram
1When looking at the hologram on
the label, you should see the
Nokia connecting hands symbol
from one angle and the Nokia
Original Enhancements logo
when looking from another angle.
2When you angle the hologram left,
right, down, and up, you should
see 1, 2, 3, and 4 dots on each side
respectively.
3Scratch the side of the label to
reveal a 20-digit code, for example
12345678919876543210. Turn
the battery so that the numbers
are facing upwards. The 20-digit
code reads starting from the
number at the top row followed by
the bottom row.
4Confirm that the 20-digit code is
valid by following the instructions
at www.nokia.com/batterycheck.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the
hologram on the label is an authentic Nokia battery, please do
not use the battery. Take it to the nearest authorized Nokia
service point or dealer for assistance. The use of a battery that
R1113_en.book Page 114 Friday, November 25, 2005 12:49 PM
FCC Draft
Battery information
115
is not approved by the manufacturer may be dangerous and
may result in poor performance and damage to your device
and its enhancements. It may also invalidate any approval or
warranty applying to the device.
To find out more about original Nokia batteries, visit
www.nokia.com/battery.
R1113_en.book Page 115 Friday, November 25, 2005 12:49 PM
FCC Draft
Care and maintenance
116
Care and maintenance
Your device is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will
help you protect your warranty coverage.
• Keep the device dry. Precipitation, humidity, and all types
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
remove the battery, and allow the device to dry
completely before replacing it.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
• Do not attempt to open the device other than as
instructed in this guide.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
• Use a soft, clean, dry cloth to clean any lenses, such as
camera, proximity sensor, and light sensor lenses.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
• Use chargers indoors.
• Always create a backup of data you want to keep, such as
contacts and calendar notes, before sending your device to
a service facility.
All of the above suggestions apply equally to your device,
battery, charger, or any enhancement. If any device is not
working properly, take it to the nearest authorized service
facility for service.
R1113_en.book Page 116 Friday, November 25, 2005 12:49 PM
FCC Draft
Additional safety information
117
Additional safety information
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
Operating environment
Remember to follow any special regulations in force in any
area, and always switch off your device when its use is
prohibited or when it may cause interference or danger. Use
the device only in its normal operating positions. This device
meets RF exposure guidelines when used either in the normal
use position against the ear or when positioned at least 2.2
centimeters (7/8 inches) from the body. When a carry case,
belt clip, or holder is used for body-worn operation, it should
not contain metal and should position the device the above-
stated distance from your body.
To transmit data files or messages, this device requires a
quality connection to the network. In some cases, transmission
of data files or messages may be delayed until such a
connection is available. Ensure that the above separation
distance instructions are followed until the transmission is
completed.
Parts of the device are magnetic. Metallic materials may be
attracted to the device. Do not place credit cards or other
magnetic storage media near the device, because information
stored on them may be erased.
Medical devices
Operation of any radio transmitting equipment, including
wireless phones, may interfere with the functionality of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you
have any questions. Switch off your device in health care
facilities when any regulations posted in these areas instruct
you to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Pacemakers Pacemaker manufacturers recommend that a
minimum separation of 15.3 centimeters (6 inches) be
maintained between a wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These
recommendations are consistent with the independent
research by and recommendations of Wireless Technology
Research. Persons with pacemakers should do the following:
• Always keep the device more than 15.3 centimeters (6
inches) from their pacemaker
• Not carry the device in a breast pocket
• Hold the device to the ear opposite the pacemaker to
minimize the potential for interference.
If you suspect interference, switch off your device, and move
the device away.
R1113_en.book Page 117 Friday, November 25, 2005 12:49 PM
FCC Draft
Additional safety information
118
Hearing aids Some digital wireless devices may interfere
with some hearing aids. If interference occurs, consult your
service provider.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection systems, electronic antiskid (antilock)
braking systems, electronic speed control systems, and air bag
systems. For more information, check with the manufacturer,
or its representative, of your vehicle or any equipment that
has been added.
Only qualified personnel should service the device, or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty that may apply to
the device. Check regularly that all wireless device equipment
in your vehicle is mounted and operating properly. Do not
store or carry flammable liquids, gases, or explosive materials
in the same compartment as the device, its parts, or
enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place
objects, including installed or portable wireless equipment in
the area over the air bag or in the air bag deployment area. If
in-vehicle wireless equipment is improperly installed, and the
air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch
off your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation
of the aircraft, disrupt the wireless telephone network, and
may be illegal.
Potentially explosive environments
Switch off your device when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Potentially explosive atmospheres include areas where you
would normally be advised to turn off your vehicle engine.
Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Switch off the device at
refueling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel
depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked. They include below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust or
metal powders.
Emergency calls
Important: Wireless phones, including this device,
operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
R1113_en.book Page 118 Friday, November 25, 2005 12:49 PM
FCC Draft
Additional safety information
119
To make an emergency call:
1If the device is not on, switch it on. Check for adequate
signal strength.
Some networks may require that a valid SIM card is
properly inserted in the device.
2Press the end key as many times as needed to clear the
display and ready the device for calls.
3Enter the official emergency number for your present
location. Emergency numbers vary by location.
4Press the call key.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult
this guide or your service provider for more information.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio
waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
the device is designed to use only the power required to reach
the network. That amount changes depending on a number of
factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is ????? W/kg.
Use of device accessories and enhancements may result in
different SAR values. SAR values may vary depending on
national reporting and testing requirements and the network
band. Additional SAR information may be provided under
product information at www.nokia.com.
Your mobile device is also designed to meet the requirements
for exposure to radio waves established by the Federal
Communications Commission (USA) and Industry Canada.
These requirements set a SAR limit of 1.6 W/kg averaged over
1 gram of tissue. The highest SAR value reported under this
standard during product certification for use at the ear is 0.86
W/kg and when properly worn on the body is 1.05 W/kg.
Information about this device model can be found at http://
www.fcc.gov/oet/fccid by searching the equipment
authorization system using FCC ID: QFXRM-92.
R1113_en.book Page 119 Friday, November 25, 2005 12:49 PM
FCC Draft
Additional safety information
120
Technical information
Feature Specification
Weight 4.7 oz (134 g) with BL-5B Li-Ion Battery
Size Volume: 5.94 in3 (97.4 cm3)
Length: 3.76 in (95.4 mm)
Width: 1.97 in (50 mm)
Thickness: 1.02 in (26 mm) with camera
Frequency range GSM 850: 824–849 MHz (TX), 869–894 MHz (RX)
GSM 900: 880–915 MHz (TX), 925–960 MHz (RX)
GSM 1800: 1710–1785 MHz (TX), 1805–1880 MHz (RX)
GSM 1900: 1850–1910 MHz (TX), 1930–1990 MHz (RX)
UMTS 2100: 1920–1980 MHz (TX), 2110–2170 MHz (RX)
Transmitter output power Up to 2 W
Battery voltage 3.7 V dc
Operating temperature 59°F to + 77°F (15°C to + 25°C)
R1113_en.book Page 120 Friday, November 25, 2005 12:49 PM
FCC Draft
121
Index
Numerics
1-touch dialing 60
A
access points 95
settings 96
activation keys 106
active standby mode 92
alarms
alarm clock 13
applications
installing 104
Java 104
B
backing up 18
Bluetooth 80
device address 82
headset 103
pairing 82
security 81
sending data 82
switching off 83
bookmarks 68
C
cache, clearing 70
calendar
create entries 72
synchronizing PC Suite 72
call log
See log
calls
duration 66
international 59
settings 94
settings for call forwarding 102
share video 62
transferring 65
camera
adjusting lighting and color 21, 24,
27
editing videos 29
flash 23
image setup settings 24
saving video clips 27
self-timer 23
sending images 22
sequence mode 23
shooting modes 24
still image camera settings 25
still image camera shortcuts 22
video recorder settings 28
video setup settings 24
video shortcuts 28
certificates 101
chat
See instant messaging
clear screen
See standby mode
clock 13
alarm 13
settings 14
codes 99
lock code
PIN code 100
PIN2 code 100
security code 100
computer connections 84
conference call 59
connection settings 95
contact cards 56
inserting pictures 56
sending 56
storing touch tones 66
copying
contacts between the SIM card and
R1113_en.book Page 121 Friday, November 25, 2005 12:49 PM
FCC Draft
122
device memory 57
copyright protection
see activation keys
D
data connections
details 85
ending 85
indicators 12
date 13
device manager 86
digital rights management, DRM
see activation keys
E
editing videos
adding effects 29
adding sound clips 29
adding transitions 29
custom video clips 29
e-mail 46
automatic retrieving 50
opening 50
remote mailbox 49
retrieving from mailbox 49
settings 53
viewing attachments 50
F
file formats
.jad 104
.jar 104, 105
.sis 104
RealPlayer 39
file manager 18
fixed dialing 57
FM radio 74
G
gallery 31
backup files 33
ordering files in albums 33
presentations 33
H
handsfree
see loudspeaker
headset settings 103
help application 20
home network 16, 33
security 16
select content for sharing 35
settings 34
I
indicators 12
instant messaging 76
blocking 77
connecting to a server 76
recording messages 77
sending instant messages 77
Internet
See Web
Internet access points (IAP)
See access points
J
Java
See applications
L
lock code 100
log
erasing contents 67
filtering 67
log duration 67
loopset settings 103
loudspeaker 13
M
mailbox 49
automatic retrieving 50
media files
fast forward 40
file formats 39
mute sound 40
rewind 40
memory
clearing memory 19, 66
viewing memory consumption 19
R1113_en.book Page 122 Friday, November 25, 2005 12:49 PM
FCC Draft
123
memory card 18
menu, rearranging 90
messaging
e-mail 46
multimedia messages 46
text messages 46
movies, muvees
custom muvees 41
quick muvees 41
multimedia messages 46
music player 37
mute sound 40
O
office applications 88
P
packet data connections
settings 98
PC connections 84
PC Suite
calendar data 72
synchronization 84
transferring music files to your
memory card 37
viewing device memory data 19
personalization 91
phone label 9
phonebook
See contact cards
PIN code 100
profiles 90
Q
Quickoffice 88
R
radio 74
remote mailbox 49
remote SIM mode 81
ringing tones
personal ringing tone 58
receiving in a text message 48
S
security code
See lock code
sending
contact cards, business cards 56
images 22
video clips 30
service commands 44
Services
See Web
settings
access codes 99
access points 96
Bluetooth connectivity 81
calendar 73
call forwarding 102
call restriction 102
certificates 101
data connections 95
date and time 99
display 94
IM 76, 78
language 93
lock code 100
original settings 94
personalizing the phone 90
PIN code 100
screen saver 94
UPIN code 100
UPUK code 100
shooting modes
image shooting modes 25
video shooting modes 25
shortcuts 19
SIM card
copying names and numbers to
phone 57
messages 51
names and numbers 57
sis file 104
snooze 13
software
transferring a file to your device
R1113_en.book Page 123 Friday, November 25, 2005 12:49 PM
FCC Draft
124
104
sound clips 31
sounds
muting a ringing tone 64
recording sounds 88
standby mode 90
svg files 33
synchronization 85
T
text messages 46
themes 91
time 13
transferring content from another
device 11
U
UPIN code 100
UPnP 16
UPUK code 100
USSD commands 44
V
video call 61
answering 65
declining 65
video clips 31
video player
See RealPlayer
Visual Radio 74
viewing content 75
visual service ID 75
voice commands 103
voice dialing 60
voice mailbox 59
changing the phone number 59
forwarding calls to voice mailbox
102
voice messages 59
voice tags 103
making calls 60
volume control 13
during a call 59
loudspeaker 13
W
Web
access points, see access points
browser 68
wireless LAN 14
access point settings 97
create IAP 15
security 16
see also home network
R1113_en.book Page 124 Friday, November 25, 2005 12:49 PM