Microsoft RM-96 CDMA/AMPS 800 Cellular Phone User Manual 6152 FCC DRAFT 091405

Microsoft Mobile Oy CDMA/AMPS 800 Cellular Phone 6152 FCC DRAFT 091405

UserManual.wiki >

Microsoft >

RM 96 User Manual

Manual

2FCC DRAFTLEGAL INFORMATIONPART NO. XXXXXXXX, ISSUE NO. 1 Copyright ©2005 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 6152, Pop-Port™, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.US Patent No. 5818437 and other pending patents. T9 text input software Copyright ©1999-2005. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java™ is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 6152 products. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANYTIME WITHOUT PRIOR NOTICE.EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents3FCC DRAFTContents1. Phone at a glance .............. 112. Set up your phone ............. 173. Text entry ........................... 264. Messages............................. 295. Call register ........................ 396. Contacts.............................. 437. Camera................................ 508. Gallery................................. 549. Media.................................. 5610.Settings ............................. 6111.Organiser........................... 8012.Extras................................. 9013.Uni ..................................... 9114.PC connectivity................. 9515.Enhancements................... 9816.Battery information ....... 100

For your safety4FCC DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELYDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the device at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the device where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.

For your safety5FCC DRAFTWATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACK-UP COPIESRemember to make back-up copies or keep a written record of all important information.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLSEnsure the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.■About your deviceThe wireless devices described in this guide are approved for use on the CDMA 800 networks. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and the legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.■Network ServicesTo use the device you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize them. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

For your safety6FCC DRAFT■Shared memoryThe following device features may share memory: contacts; text messages; photos, images, and tones in gallery; calendar notes; games; and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. If your phone displays a message that the memory is full when you try to use a shared memory feature, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as photos, images, and tones in gallery; text messages; and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome7FCC DRAFTWelcomeCongratulations on your purchase of the Nokia 6152 mobile phone. Your phone provides many functions practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also connect to a PC, laptop, or other device using a data cable. To personalise your phone, you can set your favorite ring tones. ■Register your phoneMake sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call a customer center or to have your phone repaired.■Getting helpFind your phone labelIf you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the Electronic serial number (ESN) and have it available.The ESN is found on the type label, which is located beneath the battery on the back of the phone. See "Remove the back cover," p. 16 and "Remove the battery," p. 16.Contact NokiaPlease have your product with you when contacting any of these numbers:Nokia Customer Care Center, USANokia Inc.Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)Customer Care Center, CanadaNokia Products Ltd.

Welcome8FCC DRAFT601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-619-4360UpdatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. An interactive tutorial for this product may be available at www.nokiahowto.com.Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit www.nokiaaccessibility.com.

Phone at a glance9FCC DRAFT1. Phone at a glance• Earpiece port (1)• Display screen (2)• Left selection key (3)• Call key (4)• Keypad (5)• Four-way scroll and center selection key (6)• Right selection key (7)• Power key and end key (8)• Charger port (9)• Pop-Port™ connector (10)• Microphone (11)

Phone at a glance10FCC DRAFT■Keys and parts• Loudspeaker (1)• Voice command key (2)• Volume key (3)• Mini display (4)• Camera lens (5)• Camera flash (6)• Headset connector (7)• Camera and Video key (8)• Infrared (9)The voice key functions are as follows:• Short press—Answer an incoming call.• Long press—Answer or make a voice call.

Phone at a glance11FCC DRAFT■Standby modeDepending on your wireless service provider and the model number of your phone, some or all of the following selection keys may appear in the standby mode.The standby mode is home base and indicates your phone is in the idle state.Signal strength—A higher bar (at the upper left corner) indicates a stronger network signal.Uni (ICON)—Press the center selection key to select this option.Menu—Press the left selection key to select this option.Go to—Press the right selection key to select this option.Battery level—A higher bar (at the upper right corner) indicates more power in the battery.■Quick keysNote: Depending on your wireless service provider and the model number of your phone, some or all of the following Quick keys may appear in the standby mode.In the standby mode, the four-way scroll key instantly takes you to frequently-accessed menus:Scroll up key—Go to UniJa.Scroll right key—Go to U-Mail.Scroll down key—Go to the contacts list.Scroll left key—Quickly create a text message.Center selection key—Go to Uni.

Phone at a glance13FCC DRAFTScroll methodYou can use the four-way scroll key to scroll up, down, left, and right through the options.1. In the standby mode, select Menu, to scroll through the main menus.As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the battery level indicator is a scroll bar with a tab that moves up or down on the right side of the display screen as you scroll through the menus, providing a visual representation of your current position in the menu structure.2. When you arrive at a menu, press the center selection key to select submenus.• Select Back (the right selection key) to return to the previous menu.• Press the end key to return to the standby mode from any menu or submenu.In-phone helpMany features have brief descriptions (help text) you can view on the display. To view these descriptions, you must first activate help text as follows.In the standby mode, select Menu > Settings > Phone > Help text activation > On or Off. Scroll to a feature and wait about 14 seconds. Scroll down to view all of the description, or select Back to exit.■Security code settingsYour device has a security option allowing you to lock your phone with a PIN code. When the PIN code is set and turned on, no outgoing calls are allowed and the menu cannot be accessed without entering the correct code first. This prevents unauthorized outgoing calls or access to any information stored on your device.The PIN code option is in the Settings menu. The first time you access the Security option, you must enter a PIN code. The default PIN code may vary depending on your wireless service provider who provided your UIM card. The PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits in length. After three successive incorrect entries, the PIN code is

Phone at a glance14FCC DRAFTblocked. You need to enter the personal unblocking key (PUK) code. See ""Personal unblocking key (PUK) code," p. 74" p. 74.■Go to functionsThe Go to menu enables you to change the function of the right selection key on your phone. With this function, you can quickly access your most frequently used functions from the Go to menu in the standby mode. Choose Go to functions1. In the standby mode, select Go to > Options > Select options.2. Scroll up or down to highlight the desired function.3. Select Mark to add a function or Unmark to remove a function.4. Select Done when you have added all desired functions.5. Select Yes to save the changes.6. In the standby mode, select Go to to display a list of the functions you selected in step 2.Organise functions1. In the standby mode, select Go to > Options > Organise.2. Scroll up or down to highlight the function you want to rearrange, and select Move > Move up, Move down, Move to top, or Move to bottom.3. Select Done > Yes to save the changes.

Set up your phone15FCC DRAFT2. Set up your phone■Antenna Your device has a fixed and extendable antenna located at the top of the phone with the fold closed. Hold the phone with the antenna area pointed up and over your shoulder.NNote: Do not touch the antenna unnecessarily with the device switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and battery life.■BatteryNote: Always switch off the power, and disconnect the charger and any other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached.

Set up your phone16FCC DRAFTRemove the back cover1. With the back of the phone facing you, push down on the back cover.2. Slide the back cover toward the bottom of the phone and remove.Remove the batteryAfter you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.Note: Always switch off the device, and disconnect the charger before removing the battery.UIM (CDMA SIM) card installationThe User Identity Module (UIM), also called the CDMA Subscriber Identity Module (SIM), card and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting, or removing the card. The UIM card slot is built into the mechanics, located under the battery. Before installing the UIM card, always make sure that the phone is switched off and that you have removed the cover and battery.Keep all UIM cards out of the reach of small children. 1. Open the UIM holder by pressing the release button.2. Pivot the holder up.

Set up your phone17FCC DRAFT3. Insert the UIM card into the holder (beveled corner last) with the gold-coloured contacts facing down, matching up with the gold-coloured contacts on the phone.4. Pivot the holder down and replace the battery.Replace the battery1. Insert the battery, gold-coloured contact end first, into the battery slot.2. Push down on the other end of the battery to snap the battery into place.Replace the back cover1. Set the back cover on the phone with the cover tabs aligned with the slots in the phone.2. Slide the back cover toward the top of the phone until the back cover is securely in place.

Set up your phone18FCC DRAFTCharge the batteryNote: Before you use a charger with this device, check its model number. This device is intended for use when supplied with power from the AC-3 or AC-4 charger. 1. Plug the charger transformer into a standard ac outlet.2. Insert the charger output plug into the round jack at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.The ACP-12, 9, 8, 7, and the LCH-12 can also be used to charge the phone, but must be used with the CA-44 adaptor included in the box. 1. Plug the charger transformer into a standard ac outlet.2. Insert the charger output plug into the CA-44 adapter jack. Insert the CA-44 plug into the jack on the bottom of the phone.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

Set up your phone19FCC DRAFT■Turn your phone on or off1. To turn your phone on or off, press and hold the end key on the keypad for at least 4 seconds.2. Enter the security code, if necessary, and select OK. See ""Security settings," p. 71" p. 71.Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.■Connect the headsetA compatible headset, such as HS-3, may be purchased with your phone or separately as an enhancement. See ""Enhancement settings," p. 71" p. 71.1. Plug the headset connector into the Pop-Port connector at the bottom end of your phone. appears in the standby mode.2. Position the headset on your ear.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press the call key to place a call. See ""Phone at a glance," p. 9" p. 9.• Press the end key to end a call.You can also plug a compatible headset, such as a standard universal headset, into the 2.5-mm headset jack on the right side of your phone to allow hands-free operation. See ""Enhancement settings," p. 71" p. 71.

Set up your phone20FCC DRAFT■Make a callNote: Before making or receiving a call, fully extend the whip antenna.Keypad1. Enter the phone number (including the area code), and press the call key. (To delete a character to the left of the cursor, select Clear.)2. Press the end key to end the call, or select End call to cancel the call attempt.Contacts list1. In the standby mode, scroll down to display your contacts list and highlight your desired entry.2. Select Details to highlight your desired number, and then select Call.Last dialled number1. In the standby mode, press the call key to display the last 30 numbers dialled.2. Scroll to the number (or name) you want to redial, and press the call key.Conference callingConference calling is a network service that allows you to take part in a conference call with two other participants.1. Make a call to the first participant.2. With the first participant on the line, select Options > New call.3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. Select Call. The first participant is put on hold.4. When the second participant picks up, press the call key to connect the calls.5. To end the conference call, select Options > End all calls, or press the end key.

Set up your phone21FCC DRAFT■Answer callsAn incoming call1. With the fold open, press the call key, or select Answer to answer the call.2. Press the end key to reject the call.Select Silence to mute the ringing tone, then Dismiss, or do nothing. The call is eventually diverted to voicemail.With your phone set to silent in the profiles menu, select Dismiss to reject the incoming call.3. With the fold closed, press the volume key to mute the ringing tone.A short press of the voice key answers an incoming call with the loudspeaker.By default, your phone answers an incoming call when you open the fold. You can change the setting to not answer the call when the fold opens.In the standby mode, select Menu > Settings > Call > Answer when fold is opened > On or Off.Adjust the earpiece volumeWhether in or out of a call, you can scroll the volume key located on the left side of your device up or down to adjust the volume of the earpiece. When you adjust the volume, a bar chart indicates the volume level.Answer a call with the keypad lockedTo answer a call with the keypad locked, press the call key with the fold open. To answer a call with the fold closed and the keypad locked, press and hold the voice key to answer with the loudspeaker. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. See ""Keyguard," p. 23" p. 23.When the keypad lock is on, calls still may be possible to the official emergency number programmed into your device. Enter the emergency number, and press the call key.

Set up your phone22FCC DRAFTLoudspeakerWarning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.You can use your phone as a loudspeaker during a call.• To activate the loudspeaker while in a call with the fold open, select Loudsp..• To activate the loudspeaker when answering a call with the fold closed, press the voice key.• To deactivate the loudspeaker during a call, with the fold open, select Normal.The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected.Call optionsMany of the options you can use during a call are network services. Check with your wireless service provider for more information.1. Select Options during a call to display the following options:Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.New call—Initiate a conference call. See ""Conference calling," p. 20" p. 20.Save—Save a number while in a call to your contacts list. This option is available only when entering numbers during a call.Add to contact—Add a phone number to an existing contact in your contacts list while in a call. This option is available only when entering numbers during a call.End all calls—Disconnect from all active calls.Send DTMF—Enter the numbers, and select DTMF to send the numbers as tones.Contacts—View the contacts menu.Menu—View the phone menu.2. Select an option to activate the option or enter its submenu.

Set up your phone23FCC DRAFT■KeyguardWith keyguard, you can lock the keypad to prevent keys from being pressed accidentally. The locked keypad unlocks when you receive a call. After the call, the lock automatically reactivates.With the keyguard on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number, and press the call key.Lock the keypadSelect Menu with the left selection key; then press * within 2 seconds.Unlock the keypadSelect Unlock with the center selection key; then press * within 2 seconds.

Text entry24FCC DRAFT3. Text entryYou can use two methods for entering text and numbers: standard mode and predictive text mode. Select Clear to backspace the cursor and delete a character. Select and hold Clear to backspace continuously and delete characters.■Standard modeStandard mode is the only way to enter text into the contacts list and to rename caller groups.Text (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.• Press 0 to enter a space, thereby accepting a completed word.• Press 1 to insert a period into your message.• Press * to display a complete list of special characters.• Press and hold # to bring up the Editor settings (Number mode, Dictionary on or Dictionary off, Writing language).Numbers (123)To switch to 123 mode from Abc mode, press and hold # at any message entry screen to bring up the Editor settings. Select Number mode, and the device returns to the message entry screen and switches the Abc icon in the upper left corner of the display to the 123 icon (or back).Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. Scroll to navigate through the list of special characters. With a character highlighted, select Use to insert the character into your message.

Text entry25FCC DRAFT■Predictive text modeMuch faster than the standard mode method, predictive text input enables you to write messages quickly using your keypad and the built-in dictionary. In predictive text mode, your phone predicts the words as you enter them.Activate or deactivate1. At any text entry screen, select Options > Dictionary on to activate or Dictionary off to deactivate.2. If you are turning predictive text on, select the language of your choice.Text entryThe following illustration shows your text entry of the word Nokia in predictive text mode. With the English dictionary selected, press each of the following number keys once, and the screen will display Nokia by predicting the appropriate letter to use based on your keypad entry:Enter: 6 6 5 4 2 •Press 0 to enter a space, and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Prev.• If ? appears after a word, select Spell to add the word to the dictionary.•Press 1 to insert a period into your message.•Press and hold * to display special characters. Press * again to cycle through all available characters.■Change case and modePress # to switch between uppercase, lowercase, and sentence case text. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen:. Uppercase text: standard mode is on. Lowercase text: standard mode is on.

Text entry26FCC DRAFT Sentence case text: standard mode is on. This option is available only at the beginning of a sentence.Note: You can press # within 2 seconds to switch between standard mode and predictive text mode. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence.

Messages27FCC DRAFT4. MessagesIf you have subscribed to a message network service, you can send and receive messages to compatible phones also subscribed to a message service. You can send and receive multimedia and e-mail messages if supported by your service provider. Also, you can make distribution lists that contain phone numbers and names from your contacts list. See ""Text entry," p. 24" p. 24.When composing text or picture messages, check the number of characters allowed in the top right corner of the message. Using Unicode characters takes up more space. With Unicode characters in your message, the indicator may not show the message length correctly. Before sending the message, the phone tells you if the message exceeds the maximum length allowed for one message. Important: Exercise caution opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.Note: When you send a message, your device may display Message sent, indicating your device has sent the message to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.■Text messagesCompose and send1. In the standby mode, select Menu > Messages > Text messages > Create message.To go quickly to Create message, scroll left in the standby mode.2. Compose and send a message using the keypad.Depending on the messaging service enabled, some or all of the following options are available while composing your message:Preview—Preview the message when sending a picture message (only available with a picture inserted).Sending options—Mark or Unmark the sending options of a single message as Urgent, Delivery reports, or Signature (not available with a picture inserted). See ""Change sending options," p. 32" p. 32.

Messages28FCC DRAFTClear text—Erase all the text from the message editor.Insert picture—Insert a picture from a templates folder into your message.Change picture—Change the picture in a picture message (only available with a picture inserted).Delete picture—Delete the picture in a picture message (only available with a picture inserted).Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list.Move—Select Drafts to save the message in the drafts folder; select Templates to save the message as one of your predefined templates in the templates folder.Exit editor—Exits the message editor.Use template—Insert a predefined template into your message.Insert smiley—Insert a smiley into your message.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary (only available with predictive text on).Insert symbol—Insert a special character into your message (only available with predictive text on).Writing language—Choose the language you want to use.Dictionary on or Dictionary off—Turn the predictive text on or off.Matches—View matches in the dictionary for the word you want to use (only available with predictive text on and when the same set of key strokes can produce multiple words).3. To send the message, select Send to > Send to number, Send to e-mail, Send to distrib. list (if a distribution list has been created), or Send to many. Enter the recipient’s phone number or e-mail address; or select Search to retrieve a number or e-mail address from your contacts list, and select OK.Read messageWhen you receive a message, a notification message and are displayed.

Messages29FCC DRAFT1. Select Show to read the message or Exit to dismiss the notification and read the message later from your inbox. See ""View saved messages," p. 30" p. 30. 2. Scroll up or down to view the whole message, if necessary.OptionsWhen reading a text message, select Options to access some or all of the following options:Delete—Select to discard the message.Use detail—Access the following three options:•Number—Uses or saves the number. Select Options > Add to contact, Send message, or Call.•E-mail address—Lists the e-mail addresses included in the message (available only if the message contains an e-mail address). Select Save to save the e-mail address as a new phone book entry or Options > Add to contact or Send message. •Web address—Displays if a URL is included in the message.Move—Save the message to Archive, Templates, or a folder you have created.Forward—Divert the message to another phone number or e-mail address.Lock or Unlock—Lock or unlock the message.Save picture—Save the picture to your Templates folder for later use. You can enter a title for the picture, and select OK.Rename—Edit the title of the message.Reply to message1. In the standby mode, select Menu > Messages > Text messages > Inbox and your desired message, or when you receive a message, select Show.2. Select Reply > Empty screen, Original text, Template, or one of the predefined answers; then compose your reply using the keypad.3. After creating the reply, select Send. The sender’s phone number or e-mail is used as the default.

Messages30FCC DRAFTTemplatesTemplates are short, prewritten messages you can recall and insert into new text messages when you are short on time.1. In the standby mode, select Menu > Messages > Text messages > Create message > Options > Use template.2. Select your desired template.3. Select Send to > Send to number , Send to e-mail , Send to many, or Send to distrib. list (with a distribution list created).4. Enter the recipient’s phone number or e-mail address, or select Search to retrieve a number or e-mail address from your contacts list; and select Send.A distribution list only contains phone numbers of recipients and is selected from a list of predefined groups you create.Text message foldersSave messagesYou can save any message except for a template to an existing folder or to a folder that you have created.1. Open the received message or create a new message, and select Options.2. To save a received message, select Move > Archive, Templates, or a folder you have created.3. To save the draft of a message you have created, select Move > Drafts or Templates.View saved messages1. In the standby mode, select Menu > Messages > Text messages.2. Select the folder containing the message you want to view:Inbox—Automatically stores any incoming messages.Outbox—Stores messages that have not been sentSent items—Stores messages that have been sent.Drafts—Stores messages created as drafts.Archive—Stores messages that you choose to archive, including unread ones.

Messages31FCC DRAFTTemplates—Stores picture and prewritten templates. Preloaded templates can be edited and customised.My folders—Allows you to organise your messages by creating custom folders and saving some of your messages here. Select Options > Add folder, Rename folder, or Delete folder to add a custom folder or rename or delete a folder you have created.You can only delete folders created in my folders; the inbox, sent items, archive, and templates folders are protected. When deleting a folder, you are also deleting all messages in the folder.3. When the folder opens, select the message you want to view.Distribution listThe distribution list enables you to send messages to a group of contacts. In the standby mode, select Menu > Messages > Text messages > Distribution lists.To create a distribution list, select New list with no list created or Options > Create new list to create additional lists. To populate your list, select Add new and a contact from your contacts list.To use, rename, or modify a distribution list, highlight the distribution list; and select Options > Send message, Rename list, Clear list, or Delete list.Delete messagesIf your message memory is full and you have more messages waiting at the network, No space for new text messages appears in the standby mode. You can do the following:• Read some of the unread messages, and delete them individually.• Delete messages from some of your folders.Delete a single message1. In the standby mode, select Menu > Messages > Text messages.2. Select the folder containing the message you want to delete.3. Highlight the message you want to delete. 4. Select Options > Delete.5. Select Yes to delete the message or No to exit.

Messages32FCC DRAFTDelete all messages in a folder1. In the standby mode, select Menu > Messages > Text messages > Delete messages.2. Select the messages you want to delete: All—Deletes all messages in all of the folders.All read—Deletes any messages that have been read in all of the folders.All unread—Deletes any messages that have not been read in all of the folders.3. Select and Mark the folders that have messages you want to delete:Inbox—Deletes all messages from the inbox folder.Sent items—Deletes all messages from the Sent items folder.Outbox—Deletes all messages from the outbox folder.Drafts—Deletes all messages from the drafts folder.Archive—Deletes all messages from the archive folder.User defined folders—Deletes all messages from the user defined folder.4. Select Done > Yes to empty the marked folder.Change sending optionsTo change sending options for all future text messages, in the standby mode, select Menu > Messages > Text messages > Message settings > Sending options and the setting you want to change:Priority—Set the priority of the note as Normal or Urgent.Delivery reports—Send a note to yourself confirming delivery of the message. Select On or Off.Signature—Select On to create a signature to send with text messages or Off to turn this feature off.To change sending options for one message, in the standby mode, select Menu > Messages > Text messages > Create message > Options > Sending options, and Mark or Unmark the setting you want to change:Urgent—Set the priority of the note as urgent.Delivery reports—Send a note to yourself confirming delivery of the message.Signature—Create a signature to send with text messages.

Messages33FCC DRAFTChange message settingsIn the standby mode, select Menu > Messages > Text messages > Message settings > Other settings and the setting you want to change:Save incoming text messages—Select Save to UIM then phone if mem. full, Phone only, or UIM card only.Message font size—Select Small font or Large font.Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or Off. Note: When the message memory is full, your phone cannot send or receive any new messages. To free up the memory, you can select Message overwriting to make your phone automatically replace old messages in the inbox and outbox folders when new ones arrive.Save sent messages—Select Always save, Always prompt, or Off.Queue msgs. when digital unavailable—Select On, On prompt, or Off. Messages are stored in the outbox until they can be sent with digital service.■Picture messagesYour phone comes with five preloaded pictures. If necessary, you can overwrite any of the preloaded pictures. You can send a text message with pictures attached to compatible phones. However, pictures take up more space than text.To select your desired picture in the templates folder, in the standby mode, select Menu > Messages > Text messages > Templates.You cannot send a picture message using an e-mail address.Receive and saveNote: Only compatible devices that offer picture message features can receive and display picture messages.When you receive a picture message or text message, your device beeps and displays a message notification with the messaging icon in the upper left corner in the standby mode as a reminder. When you have unopened messages in your inbox, is displayed.Select Show to view the picture message or Exit to view the picture message in your inbox later. If you have more than one picture message, scroll to and select the message you want to view. Scroll to view the whole picture if necessary.

Messages35FCC DRAFTCall and setup voice mail1. After you save the voice mailbox number, in the standby mode, press and hold 1. 2. When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to setup voice mail.Listen to voice messagesAfter you set up voice mail, in the standby mode, press and hold 1; or select Menu > Messages > Voice messages > Listen to voice messages to dial the voice mailbox number. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Automate voice mailYou can insert special characters called dialling codes into phone numbers such as voice mail, and save the number to a speed dialling location. Dialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. See ""Phone numbers with dialling codes," p. 35" p. 35.Voice mail services vary by wireless service provider. The following instructions are examples of common operations. Please check with your wireless service provider for specific instructions on using your voice mail service.Write down voice mailbox number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should look similar to the following:Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press #.Phone numbers with dialling codesDialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. To set up dialling codes, do the following:1. In the standby mode, select Menu > Contacts > Speed dials.

Messages36FCC DRAFT2. Scroll to an (empty) speed dialling slot, and select Assign.3. Enter your mailbox phone number, including the area code.4. Enter any dialling codes as necessary after the entered phone number.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice (two times 2.5 seconds) after the voice mailbox number: 2145551212pp.5. Enter any remaining pauses or other information that enables you to listen to your messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned speed dialling key in the standby mode.Insert dialling codesPress * repeatedly to cycle through dialling codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialling string.The following dialling codes are available: *—Bypasses a set of instructions.p—Pauses for 2.5 seconds before sending any numbers that follow.+—Replaced by the international access code.w—Waits for you to press the call key before sending the numbers or codes that follow.Clear voice mail iconTo clear the voice mail icon from the display, in the standby mode, select Menu > Messages > Voice messages > Clear voice message icon.■Web messagingWeb messaging is a network service. See ""Network Services," p. 5" p. 5.If your wireless service provider supports this feature, you can use the minibrowser to check for e-mail messages. In the standby mode, select Menu > Messages > Minibrowser messages > Connect.See ""Uni," p. 89" p. 89 for more information on using the minibrowser in your device to access web pages.

Call register37FCC DRAFT5. Call registerCall register stores information about your last 30 missed, received, and dialled calls respectively and adds the total duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest.Whether viewing missed, received, or dialled calls, select Options to access these menu options:Time of call—Displays the date and time of the call.Send message—Sends a message to the number.Use number—Edits the number and associates a name with the number.Save—Enters a name for the number and saves it to your contacts list.Add to contact—Adds a number to a contact and saves it to your contacts list (available only with the number not yet stored in your contacts list).Delete—Clears the number from memory.Call—Calls the number.■View missed callsThe missed calls feature does not function with your device switched off. Missed calls are calls you have never answered. To view missed calls, do the following:1. In the standby mode, select Menu > Call register > Missed calls, or with missed call notification displayed, select List.2. Scroll to a name or number, and select Options and an option to view or activate.■View received callsReceived calls are calls that have been answered.1. In the standby mode, select Menu > Call register > Received calls.2. Scroll to a name or number, and select Options and an option to view or activate.■View dialled numbersDialled calls are previous numbers you have dialled from your device:

Call register38FCC DRAFT1. In the standby mode, press the call key, or select Menu > Call register > Dialled numbers.2. Scroll to a name or number, and select Options.3. Select an option to view or activate.View call timesYou can make or receive calls to or from the same number and view up to five calls displayed with the time each call occurred. Your device clock must be set for this feature to work accurately.1. In the standby mode, select Menu > Call register > Missed calls, Received calls, or Dialled numbers.2. Highlight your desired name or number, and select Options > Time of call.3. Scroll down to view the call times from this number; select Back to return to the options list. ■Delete call registersYou can delete any missed, dialled, or received calls from your device memory.1. In the standby mode, select Menu > Call register > Delete recent call lists.2. Select the call type you want to clear: All, Missed, Received, or Dialled.■Call durationContact your wireless service provider for the actual calls and services invoice, which may vary depending on network features, rounding off for billing, taxes, and so forth. You can view the duration of your last call, all your dialled calls, all your received calls, all your calls, and your life timer, as well as clear your timers. Select Menu > Call register > Call duration > Last call duration, Dialled calls' duration, Received calls' duration, All calls' duration, Life timer, or Clear timers. After you select Clear timers, enter your security code, and select OK. See ""Security settings," p. 71" p. 71.Note: All call timers, except the life timer, are reset to zero with Clear timers selected.Note: Some timers, including the life timer, may be reset during service or software upgrades.

Call register39FCC DRAFTTo activate the call timer in the standby mode while in a call, select Menu > Call register > Call duration > Last call duration > Show call time on display > On or Off.To view your last call duration, select Menu > Call register > Call duration > Last call duration.■Data and fax call durationData and fax calls are a network service. See ""Network Services," p. 5" p. 5. If your wireless service provider supports this feature, you can view the size or duration of sent or received data and fax calls.Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call register > Data/fax calls and one of the following options:Last sent data/fax— View the size (KB) of the last sent data or fax call.Last received data/fax—View the size (KB) of the last received data or fax call.All sent data/fax—View the size (KB) of all sent data and fax calls.All received data/fax—View the size (KB) of all received data and fax calls.Duration of last data/fax call—View the duration time of the last data or fax call.Duration of all data/fax calls—View the duration time of all calls.Clear all data/fax registers—Select OK > Yes to clear all data or fax logs.■Minibrowser durationMinibrowser is a network service. See ""Network Services," p. 5" p. 5. If your wireless service provider supports this feature, you can view the size or duration of sent or received data from the minibrowser.Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call register > Minibrowser calls and one of the following options:Last sent browser data—View the size (KB) of the last sent browser data.Last received browser data—View the size (KB) of the last received data.

Call register40FCC DRAFTAll sent browser data—View the size (KB) of all sent browser data.All received browser data—View the size (KB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser registers—Select OK > Yes to clear all browser logs.

Contacts41FCC DRAFT6. ContactsThe contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries you can save may vary, depending on the length and total number of entries in the contacts list.■Add new contactsTo access the contacts list in the standby mode, select Menu > Contacts > Names. Save contact name and number1. In the standby mode, enter the phone number you want to save.2. Select Options > Save.3. Enter the name, and select OK. Save contact number only1. In the standby mode, enter the phone number you want to save.2. Select and hold Options. Save an entry1. In the standby mode, select Menu > Contacts > Names > Options > Add new.2. Enter the name, and select OK.3. Enter the phone number, and select OK > Back.Save numbers and text itemsYou can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, or primary number, which you can always change.1. In the standby mode, scroll down to display your contacts list and highlight the entry to which you want to add a phone number or text item.

Contacts43FCC DRAFTSet up speed diallingYou can associate any entry in the contacts list with a key from 2-9. To dial those entries, press and hold the assigned key. See ""Speed dialling," p. 64" p. 64 to activate or deactivate speed dialling.Assign a key to speed dialling1. In the standby mode, select Menu > Contacts > Speed dials.2. Scroll to an (empty) speed dialling slot, and select Assign.3. Enter the number (including the area code) and a name for the number, and select OK; or select Search to retrieve a number from the contacts list.If speed dialling is off, the device displays a prompt and asks if you want to turn speed dialling on.4. Select Yes to activate speed dialling.Change speed dialling numbers1. In the standby mode, select Menu > Contacts > Speed dials.2. Scroll to the speed dialling entry you want to change, and select Options > Change.3. Enter the new number and a name for the entry, and select OK; or select Search to retrieve a number from the contacts list.Delete speed dialling numbers1. In the standby mode, select Menu > Contacts > Speed dials.2. Scroll to the speed dialling entry you want to delete, and select Options > Delete > Yes.■Voice tagsYou can dial up to 25 stored numbers using voice dialling.Before using voice tags, note the following:• Voice tags are not language-dependent. They depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.

Contacts44FCC DRAFT• Very short names are not accepted. Use long names and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances.Assign a voice tag to an entryBefore you can use voice dialling, you must first assign a voice tag to the number.1. In the standby mode, scroll to the entry in your contacts list to which you want to assign a voice tag.2. Select Details > Options > Add voice tag > Start.3. Speak clearly into the microphone. Do not select Quit unless you want to cancel the recording. The device automatically stops recording, and saves and replays the voice tag. appears next to commands that have voice tags assigned.Dial a number1. In the standby mode, press and hold the right selection key with the fold open, or press and hold the voice key regardless of the fold being open or closed.2. When you hear several beeps and Speak now appears, release the key.3. Pronounce the voice tag clearly into the microphone.When the device finds the voice tag, Found: appears, and the device automatically dials the number. If the device does not locate a number or recognize the voice tag, No match found appears.Voice tags1. After you have associated a voice tag to a contact, select Menu > Contacts > Voice tags and your desired voice tag entry.2. Select Playback, Change, or Delete.

Contacts45FCC DRAFT■Edit contacts list entries1. In the standby mode, scroll to the entry you want to edit in your contacts list.2. Select Details > Options.3. Select one of the following options, which may vary depending on whether you are editing a contact listed by phone number or contact name:View—View the phone number of the contact.Add detail—Add more details to the contact: Name (only available with no name added), Number (General, Mobile, Home, Office, or Fax), E-mail address, Web address, Postal address, Note, Image (only available with no image added), or Tone.Edit name, Edit number, Edit detail, or Change image—Edit an existing contact name, phone number, details, or image attached to the contact.Delete—Delete more details (Delete number or Delete detail) or the entire contact entry (Delete contact) of the contact.Send message—Create and send the contact a text message.Use number—Use or save the number (available when you select a contact listed with a contact name). Select Options to use the number.Set as default—Change the default number of the contact.Change type—Change the number type to General, Mobile, Home, Office, or Fax.Add voice tag or Voice tag—Add a voice tag to the contact with no voice tag assigned, or select Playback, Change, or Delete with a voice tag assigned.Copy number—Copy the number to the UIM (SIM card) from the phone memory or vice versa.Send bus. card—Send the contact as a business card to another device.Caller groups—Add the contact to an existing caller group.Speed dial—Add the contact to your speed dialling list.4. Edit the option to your preference, and select OK.

Contacts46FCC DRAFT■Delete contacts entriesTo delete all entries in your contacts list, in the standby mode, select Menu > Contacts > Delete all contacts.■Access the contacts menu1. In the standby mode, select Menu > Contacts and one of the following options:Names—View the entries in your contacts list, and select Details or Options > Search, Quick search, Add new, Delete contact, or Copy for your selected entry.Settings—Change the memory in use, contacts list view or check the memory status of your device.Caller groups—View and edit the properties of any of the caller groups, including Family, VIP, Friends, Business, or Other.Voice tags—Listen to, modify, or delete a voice tag to a contact in the contacts list.Speed dials—View or modify the list of speed dialling numbers.Delete all contacts—Delete all entries in your contacts list.2. Select an option to activate the feature or access its submenu.Search for a name1. In the standby mode, scroll down to display the contents of your contacts list.2. Press the key corresponding to the first letter of the name for which you are searching.3. Scroll to select a contact, and select Details to view the details.Configure settingsYou can select which memory to use, how the contacts appear in your contacts list and view the amount of memory used or available in your device.In the standby mode, select Menu > Contacts > Settings > Memory in use to select the phone, UIM or both. select Menu > Contacts > Settings > Scrolling

Contacts47FCC DRAFTview to changethe view of name list or Memory status to view the device memory used and remaining.■Send and receive contactsYou can send and receive an entry in your contacts list using text messaging, if supported by your wireless service provider.Send a business cardYou can send a business card as a text message to a compatible phone or other handheld device.1. Highlight your desired entry from your contacts list, and select Details > Options > Send bus. card > Via text message or Via infrared. Default number and All details options appear only if you have more than one number or detail saved to the contact entry.2. Enter the number for your recipient, or select Search to retrieve a number from your contacts list.3. Select OK and the business card is sent.

Camera48FCC DRAFT7. CameraYou can take photos and record video clips with the built-in 1.0 megapixel camera. The camera lens is on the front of the device. The camera produces photos in JPEG format and video clips in H.263 (SubQCIF) format. When using the features in this device, please follow local laws and respect privacy rights and additional rights of other people.After you take a picture or video, you can attach it to a multimedia message, send it with MMS, save it as a wallpaper, save it on a compatible PC using Nokia PC Suite software, and upload it to a Web address with the content image uploader. When you attach a picture to an entry in your list of contacts, the picture is displayed when the contact calls you.The Nokia 6152 device supports an image capture resolution of 1.0 megapixal (1152 x 864 pixels). The image resolution in these materials may appear different.If there is not enough memory to take a new photo, delete old photos or other files in the Gallery.■Take a photo1. In the standby mode, press the camera key to activate the camera, or select Menu > Camera.2. Select Capture to take the photo. When taking a photo, a shutter sound is heard, the photo displays on the screen, and either a blinking icon or scrolling indicator displays as the photo is saved to the Images folder of Gallery.To change the camera mode from still image to video, or video to still image, select Options and the mode you want.3. Select Back to take another photo or Options and choose from one of the following:Video—Change from still image to video.Zoom—Zoom in closer before capturing a photo or get a closer look at the captured photo; use the scroll key to navigate around the photo.Night mode—Turn night mode on or off.New image—Select to capture a new photo.Flash on or Flash off—Turn the flash on or off.

Camera49FCC DRAFTSelf-timer on—Use the self-timer to delay capturing a photo for 10 seconds, or set to Self-timer off.Img. sequence on—Take a series of six pictures in sequence, or set to Img. sequence off.Open Gallery —Open gallery to view saved images, videos, and recordings.Settings—Select options in Image quality, Video clip quality, Video clip length ,Camera sounds, Self-timer lights, Default title, Image and video storage, or Default mode.View previous—View the previous photo.Send—Send a photo Via multimedia or Via infrared to a compatible device or PC.Attach to contact—Attach an image to a contact in Names.Rename—Enter or edit the name of the captured photo, and select OK.Set contrast—Scroll to adjust the contrast of the captured photo.Set as wallpaper—Use a captured photo for wallpaper.Set as s. saver—Use a captured photo as a screen saver.Details—View the Name, Size, Created, Format, Resolution, or Copyright of a captured photo.Record a video clip1. In the standby mode, select Menu > Camera > Options > Video > Record. While you are recording, the recording indicator and the remaining recording time display.2. Select Pause to pause the recording, Continue to resume the recording, or Stop to stop the recording. The device saves the recording in the video clip folder in gallery.3. Select Back to record another video or select Options and one of the following:Still image—Go back to standard photo mode.Zoom—Zoom in closer before recording a video or get a closer look at the recorded video; Scroll to navigate around the photo.Mute or Unmute—Turn the sound on or off.

Camera50FCC DRAFTFlash on or Flash off—Turn the flash on or off.Open Gallery—Go to the video clip folder of the gallery menu.Settings—Select options in Image quality, Video clip quality, Video clip length ,Camera sounds, Self-timer lights, Default title, Image and video storage, or Default mode.Delete—Delete the video clip.Send—Send the video clip to another device as a multimedia message or use IR connectivity.Rename—Rename the video clip.New video clip—Record another video clip.Mute audio—Watch a video without sound.Set as s. saver—Save a video as a screen saver.Set contrast—Scroll to increase or decrease contrast of the selected video.Details—View details of the selected video, such as name, size, time and date created, length, file format, and copyright information.Self-timerIn the standby mode, select Menu > Camera >Options > Self-timer to set a timer and delay capturing a photo for 10 seconds. Select Start a beep sounds while the self-timer runs and beeps faster when the camera is about to capture the photo. After the timeout, the camera takes the photo and saves the photo in the images folder of the gallery menu.SettingsIn the standby mode, select Menu > Camera > Options >Settings to change the settings in the camera mode. Select one of the following options:Image quality—Define file compression when saving the image. Select High, Normal, or Basic. High uses the least file compression and provides the best image quality but takes more memory.Video clip quality—Define the quality of a video clip. Select High, MediumLow, or .Video clip length—Select Default (15 seconds) or Maximum (2.5 minutes depending on conditions). Only video clips that are default length or shorter can be sent in a multimedia message.

Camera51FCC DRAFTCamera sounds >On or Off—Set camera sounds.Self-timer lights > On or Off—Set self-timer lights.Default title—Select Automatic to use a predefined title orMy title to key in or edit a new title.Image and video storage—Select the folder for image storage.Default mode—Select Standard photo or Videofor the default camera mode.

Gallery52FCC DRAFT8. GalleryYou can save pictures, video clips, recordings, and ringing tones to folders in the Gallery and add new folders as well. You can download images and tones using MMS, SMS, mobile Internet sites, or Nokia PC Suite.Your device supports a digital rights management system to protect content you have acquired. Content such as a ringing tone, can be protected and associated with certain usage rules, for example, the number of usage times or a certain usage period. Usage rules are defined in the content activation key that can be delivered with the content or delivered separately, depending on your wireless service provider. You may be able to update the activation key. Always check the delivery terms of any content and activation key before acquiring them, as they may be subject to a fee.Copyright protection may prevent some images, ringing tones, and other content from being copied, modified, transferred, or diverted.Your device has about 12 MB of memory for storing files in the Gallery. This memory is not shared with other functions, such as contacts. If the device displays a message that the memory is full, delete some existing files before proceeding.■Folders1. In the standby mode, select Menu > Gallery > Images, Video clips, Graphics, Tones, Recordings, , or a user-created folder.2. Select Open to view a list of the files in the folder or Options to access the following:Delete folder —Delete a folder you have created. You cannot delete a preset folder.Move—Move the selected folder into another folder. After selecting Move, scroll to another folder, and select Move to. You cannot move a preset folder.Rename folder—Rename a folder you have created. You cannot rename a preset folder.Details—Show the name, size, and date of creation of the selected folder.Type of view—Select List with details, List, or Grid to determine how to display the folders and files within them.

Gallery53FCC DRAFTSort—Sort the contents of the selected folder by name, date, format, or size.Add folder—Create a new folder.Memory status—Check the available memory for the device handset.Activation key list—View the list of available activation keys. You can delete activation keys if desired.

Media54FCC DRAFT9. Media■Media playerWith the media player you can download, view, and play compatible images, audio and video files, and animated images from a variety of sources. The media player enables you to play streaming videos and streaming audio from a network server. Streaming functionality is a network service and requires network support. Check the availability of these services, pricing, and tariffs with your network operator or the service provider whose service you want to use. Service providers will also give you instructions on how to use their services.In the standby mode, select Menu > Media > Media player and one of the following:Online media—Connect to the operator’s network. This is a network service. Check with your service provider for pricing and information.Open Gallery—Open the Gallery. From Gallery, you can play stored audio and video files. See ""Gallery," p. 52" p. 52.FF/Rew interval—Set the timing interval for fast forward and rewind. Ind the standby mode, select Menu > Media > Media player > FF/Rew interval > 10 seconds > 20 seconds > 30 seconds or Other.■RadioYour phone has an FM radio that also functions as an alarm clock radio. To listen to the FM radio on your phone, connect a compatible music stand or stereo headset to the connector on the bottom of the phone. The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly.The quality of a radio broadcast depends on coverage of the radio station in that particular area.Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Turn the radio on and off1. Connect the phone to a compatible headset or music stand.

Media55FCC DRAFT2. In the standby mode, select Menu > Media > Radio. The channel location number, the name of the radio channel (if you have saved the channel), and the frequency of the radio channel are displayed.To use the graphical keys , , , or on the display, scroll left or right to the desired key, and select it.3. If you have already saved radio channels, select or to scroll to the channel you would like to listen to.To select a radio channel location, briefly press the corresponding number keys.4. To turn off the radio, press the end key, or select Options > Switch off.OptionsWith the radio on, select Options and one of the following:Switch off—Turn off the radio.Save channel—Save the current station to one of 20 locations (only available with a new station entered).Channels—Scroll up or down to select a channel from 20 locations. WIth an existing channel highlighted, select Options > Delete channel or Rename to delete or rename the saved channel.Mono output or Stereo output—Listen to the radio in monaural mode (default) or in stereo. Stereo output is available through a stereo enhancement.Loudspeaker or Headset—Listen to the radio through the speakerphone or through the headset.Set frequency—Manually enter the frequency of a known radio station.To set the radio frequency, press * and use the keypad to enter the frequency of a known radio station.To adjust the radio volume, press the volume up and down keys.When an application using a browser connection is sending or receiving data, it may interfere with the radio.When you place or receive a call, the radio automatically mutes. When the call ends, the radio switches back on.Tune and save a radio channelYou can save a preset station to any one of 20 locations in memory.

Media56FCC DRAFT1. When the radio is on, select or to change the radio frequency in 0.1 MHz steps, or select and hold or to start the channel search. Searching stops when a channel is found.2. To save the channel, select Options > Save channel.To save the channel to a memory location 1 to 9, press and hold the corresponding number key while the radio is playing. To save the channel in the memory location from 10 to 20, press briefly 1 or 2 and the desired number key 0 to 9.3. Enter a name for the channel, and select OK. 4. Select an (empty) location to save the channel.■Voice recorderThis feature enables you to record pieces of speech or sound with your device and listen to them later. The total available time is 3 minutes with no memos stored. The maximum length of a recording depends on how much memory remains available.In the standby mode, select Menu > Media > Recorder > Record to start the recording or Recordings list to manage the folder you have defined for recording storage.Record speech or sound1. In the standby mode, select Menu > Media > Recorder > Record.2. After you hear the recorder start tone, begin recording speech or sound.3. When you finish recording, select Stop and your recording is saved to the Recordings folder in the Gallery.OptionsAfter you have saved the recording to the Recordings folder, highlight the recording, and select Open to listen to the recording using the earpiece; or select Options and one of the following.Delete—Erase the recording.Move—Move the recording to another folder.Rename—Change the name of the recording.

Media57FCC DRAFTSet as ring tone—Use your recording as a ringtone (a network-dependent feature).Details—Show the name, size, and date of creation of the recording.Type of view—Select List with details, List, or Grid to determine how to display the recordingSort—Sort the contents of the recording by name, date, format, or size.Delete all—Delete all items in a folder.Open in sequence—Open items in a folder in sequence.Add folder—Create a new folder.Memory status—Check the available memory for the device handset.Activation key list—View the list of available activation keys. You can delete activation keys if desired.■Media equaliserThe equaliser enhances the sound quality when using the music player by amplifying or attenuating frequency bands. You can access five preset equaliser settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.Activate an equaliser setIn the standby mode, select Menu > Media > Equaliser, scroll to the desired setting, and select Activate.Create a custom equaliser set1. In the standby mode, select Menu > Media > Equaliser.2. Scroll to Set 1 or Set 2, and select Options > Edit.The selected set appears in the display with the bar on the far left highlighted. The bars adjust frequencies, from the lowest (the leftmost bar) to the highest (the rightmost bar). The higher the indicator on a particular bar, the more that frequency is amplified.3. To adjust the lowest frequency, scroll up and down on the bar.

Media58FCC DRAFT4. To adjust other frequencies, scroll left or right to the other bars.5. Repeat steps 3 and 4 to adjust the setting for each frequency; then select Save.6. To rename the setting, select Options > Rename, enter a new name, and select OK.7. To activate the setting, select Activate.

Settings61FCC DRAFT1. In the standby mode, select Menu > Settings > Main display > Wallpaper > Select wallpaper > Images, Video clips, Graphics, Tones, Recordings, Themes, or a user-created folder > Open.You can also select Menu > Settings > Main display > Wallpaper > Select slide set.2. Browse your selected folder containing the graphics or image of your desired wallpaper.3. When you arrive at the image of your choice, select Options > Set as wallpaper.4. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Main display > Wallpaper > On or Off.Screen saverIn the standby mode, select Menu > Settings > Main display > Screen saver > On, Off, Screen savers (Image, Slide set, or Video clip), or Time-out.Power saverYou can turn the power saver on and off. In the standby mode, select Menu > Settings > Main display > Power saver > On or Off.Color schemesYou can change the colour of some display components in your device, such as indicators and signal bars.In the standby mode, select Menu > Settings > Main display > Colour schemes and the colour scheme of your choice.Backlight time-outYou can choose how long to set the backlights on. In the standby mode, select Menu > Settings > Main display >Backlight time-out >15 seconds or Customise.

Settings62FCC DRAFT■Mini display settingsWallpaperYou can set your device to display a background picture (wallpaper). 1. In the standby mode, select Menu > Settings > Mini display > Wallpaper > Select wallpaper > Images, Video clips, Graphics, Tones, Recordings, Themes, or a user-created folder > Open.You can also select Menu > Settings > Mini display > Wallpaper > Select slide set.2. Browse your selected folder containing the graphics or image of your desired wallpaper.3. When you arrive at the image of your choice, select Options > Set as wallpaper.4. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Mini display > Wallpaper > On or Off.Screen saverIn the standby mode, select Menu > Settings > Mini display > Screen saver > On, Off, Screen savers (Image, Slide set, or Video clip), or Time-out.Power saverYou can turn the power saver on and off. In the standby mode, select Menu > Settings > Mini display > Power saver > On or Off.Color schemesYou can change the colour of some display components in your device, such as indicators and signal bars.In the standby mode, select Menu > Settings > Mini display > Colour schemes and the colour scheme of your choice.

Settings63FCC DRAFT■Time and date settingsClockIn the standby mode, select Menu > Settings > Time and date > Clock > Show clock or Hide clock, Set the time, Time zone or Time format.DateIn the standby mode, select Menu > Settings > Time and date > Date > Show date or Hide date, Set the date, Date format, or Date separator.Date and time auto-updateAuto-update is a network service. See ""Network Services," p. 5" p. 5. If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, for instance when you have traveled to another network or time zone.In the standby mode, select Menu > Settings > Time and date > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you reenter your digital network.If your battery has been removed or has discharged outside the digital network, you may be prompted to enter the time manually (when the battery is replaced or recharged, and you are still outside of the digital network).■Call settingsAnykey answerAnykey answer enables you to answer an incoming call. Briefly press any key except the right selection key or end key.In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your device redials the

Settings64FCC DRAFTnumber (number of times is specified by the network), and notifies you when the network is available.In the standby mode, select Menu > Settings > Call > Automatic redial > On or Off.Speed diallingYou can activate or deactivate speed dialling. In the standby mode, select Menu > Settings > Call > Speed dialling > On or Off. See ""Set up speed dialling," p. 43" p. 43.Open fold to answerBy default, your phone answers an incoming call when you open the fold. You can change the default setting to have your phone not answer calls with the fold open.In the standby mode, select Menu > Settings > Call > Answer when fold is opened > On or Off.Calling cardIf you use a calling card for long distance calls, you can save the calling card numbers in your device. Your device can store up to four calling cards. Contact your calling card company for more information.Save information1. In the standby mode, select Menu > Settings > Call > Calling card.2. Enter your security code, and select OK. See ""Security settings," p. 71" p. 71.3. Scroll to one of the four card memory locations, and select Options > Edit > Dialling sequence and one of the following sequence types:Access no.+ phone no.+ card no.—Dial the access number, the phone number, then the card number (and the PIN, if required).Access no.+ card no.+ phone no.—Dial the access number, the card number (and the PIN, if required), then the phone number.Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then the card number (and the PIN, if required).

Settings65FCC DRAFT4. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.5. Select Card name, enter the card name, and select OK. Make callsAfter you have saved your calling card information in your device, you can make a call using your calling card.1. In the standby mode, select Menu > Settings > Call > Calling card. 2. Enter your security code, and select OK. See ""Security settings," p. 71" p. 71.3. Select your desired calling card.4. Press the end key to return to the standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.International prefixYou can store an international dialling prefix into your device. In the standby mode, select Menu > Settings > Call > International prefix. In the standby mode, when you enter + (press * twice) at the beginning of a phone number, your device automatically inserts the international dialling prefix that you have stored after you press the call key. See ""Insert dialling codes," p. 36" p. 36.Data or fax callsData and fax calling is a network service. See ""Network Services," p. 5" p. 5. If your wireless service provider supports this feature, you can set up the device to send or receive data and fax calls with a terminal, such as a PDA or PC, connected.For better performance during data calls, place the device on a stationary surface. Do not move the device by holding it in your hand during a data call.For more information on connectivity, refer to the PC/PDA Connectivity Guide which can be downloaded from the Nokia website at http://www.nokia.com/us.

Settings66FCC DRAFT1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Incoming data/fax call and one of the following options:Normal—The device receives incoming calls as usual.Data calls only—The device receives only data calls.Fax calls only—The device receives only fax calls.2. When finished with receiving the fax or data call, repeat steps 1 and 2, and select Normal.Data transferYou can view the transmission speed when sending or receiving data and fax calls.In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate display > Graphic or Off.Call summaryYour device can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call > Call summary > On or Off.Ringing tone for no caller IDYou can select a different ringing tone for calls received with no caller ID. In the standby mode, select Menu > Settings > Call > Ringing tone for no caller ID > On or Off.■Phone settingsPhone languageThe phone language affects the time and date formats of the clock, alarm clock, and calendar. In the standby mode, select Menu > Settings > Phone > Phone language and the language of your choice.Memory statusYou can view the size of memory available on your device. In the standby mode, select Menu > Settings > Phone > Memory status.

Settings67FCC DRAFTAutomatic keyguardYou can set the keypad of your device to lock automatically after a preset time delay.1. In the standby mode, select Menu > Settings > Phone > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed.3. Enter the delay time (in mm:ss format), and select OK.When keyguard is on, it may be possible to dial the emergency number programmed into your device. DTMF tonesDTMF tones, are the tones that sound when you press the keys on your device keypad. You can use DTMF tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. DTMF tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device.Set typeIn the standby mode, select Menu > Settings > Phone > DTMF tones > Manual DTMF tones and one of the following options:Continuous—Used to set the tone sound for as long as you press and hold a key.Fixed—Used to send tones of the duration you specify in the DTMF tone length option.Off—Used to turn off tones. No tones are sent when you press a key.Set length You can specify touch-tone length for the Fixed option. In the standby mode, select Menu > Settings > Phone > DTMF tones > DTMF tone length > Short (95 ms) or Long (350 ms).Start-up toneYou can select to have a start-up tone when you first turn on your device. In the standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.

Settings68FCC DRAFTHelp text activationYour device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 14 seconds and wait for the help text to display. If necessary, scroll through the full help text.The default setting for help text is On. However, you can turn help text on or off. In the standby mode, select Menu > Settings > Phone > Help text activation > On or Off.Confirm UIM service actionsThis option enables you to request notification when your service provider makes changes to UIM-related services.For availability, rates, and information on using UIM services, contact your UIM card vendor, for example, your network operator.Select Menu > Settings > Phone > Confirm UIM service actions > Yes or No.Browser access pointsBrowser access points are groups of settings that control various aspects of the browser. You can select the access point you want to use, you can view the settings of the default access point, or you can view or edit settings or an additional access point.To access the browser menu, in the standby mode, select Menu > Settings > Phone > Browser access point settings and one of the following options: •Active access point—To select an access point for use with the browser.•View Unicom default settings—To view the default Unicom browser settings.•Edit customised settings—To edit the browser menu for the customisable access point.If you have already launched the browser, select Menu > Navigate > Advanced > Settings > Access point and select from the following options:• To select the default access point, select Unicom default.• To view the settings for the default access point, select Customised.• To view the settings for the default access point, select Unicom default > View/Edit.• To view or edit the settings for the customised access point, select Customised > View/Edit.

Settings69FCC DRAFT■ConnectivityInfraredYou can set up the phone to receive data through its IR port. To use an IR connection, transmission and reception must be to or from an IR compatible phone or device. You can send or receive data such as business cards, graphics, images, sound clips, music files, videos, and calendar notes to or from a compatible phone or data device (such as a computer) using the IR port of your phone.Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.Send and receive data1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.The preferable distance between the two devices in an IR connection is from 3 inches to 3 feet.2. To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.3. The user of the other device must activate IR as well.If data transfer is not started within 2 minutes after the activation of the IR port, the connection is cancelled and must be restarted.Connection indicator• When is shown continuously, the IR connection is activated and your phone is ready to send or receive data using its IR port.• When blinks, your phone is trying to connect to the other device or a connection has been lost.■Voice commands and voice tagsBefore using voice tags, note the following:• Voice tags are not language-dependent, but depend on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.

Settings70FCC DRAFT• Very short names are not accepted. Use long names, and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances.Hands-free operationYou can set as many as 16 voice commands to enable hands-free operation of certain features in your device. Assign a voice tag to a commandBefore using voice commands, you must first add a voice tag to the device function. 1. In the standby mode, select Menu > Settings > Voice commands.2. Select the device function you want to tag: Profiles, Voice mailbox, Radio, Voice recorder or Call register.3. If necessary, select an option associated with that function.4. Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.The device replays and saves the recorded tag. appears next to commands with voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a function in your device, to issue a command, speak the voice tag.1. In the standby mode, press and hold the right selection key or voice key.2. With Speak now displayed, pronounce the voice tag clearly into the microphone. With the voice tag found, the device displays Found:, and plays the recognized voice tag through the earpiece. The function you requested is activated.OptionsAfter you have associated a voice tag to a command, you can select one of the following options:Playback—Listen to the voice command tag.

Settings72FCC DRAFTPIN code requestTo provide extra security in case your phone is lost or stolen, enable your phone to request the PIN code when powered on.1. In the standby mode, select Menu > Settings > Security > PIN code request.2. Enter the PIN code, and select OK.3. Select On.Call restrictionsSelect call restrictions to block or allow numbers for incoming and outgoing calls. With any numbers entered as allowed numbers, all those entered as blocked numbers are ignored. With a number blocked, the phone blocks any call from it, and send the caller to the voice mail.1. In the standby mode, select Menu > Settings > Security > Call restrictions. 2. Enter the security code, and select OK. See ""Security settings," p. 71" p. 71.3. Select the types of calls you want to restrict:Restrict outgoing calls—Set restrictions on making calls.Restrict incoming calls—Set restrictions on receiving calls.4. Select whether to block or allow numbers:Blocked numbers—Set the numbers the phone can only block, allowing all the rest.Allowed numbers—Set the numbers the phone can only call or receive, blocking all the rest. 5. Select one of these options: Select, Add restriction (unavailable with memory full), Edit (unavailable with no number added), or Delete (unavailable with no number added).Note: With restricted calls, you may still call the official emergency number programmed into your device.Security levelYour device can be set to different security levels to control device use and memory settings. In the standby mode, select Menu > Settings > Security > Security level. Enter your security code, and select OK and one of the following options:

Settings73FCC DRAFTNone—Disable security level protection.Memory—Enable or disable memory protection.Phone—Enable or disable phone protection.Access codesYou can change your security code and PIN code. Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialling of the emergency number.Change security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345. When you change the security code, keep the new code secret and in a safe place, separate from your phoneIf you enter the wrong security code five times in succession, you will not be able to enter a code for 5 minutes, even if you power off the phone between incorrect entries.1. In the standby mode, select Menu > Settings > Security > Access codes > Change security code.2. Enter the current security code (default is 12345), and select OK.3. Enter the new security code (up to 10 characters), and select OK.4. Enter the new security code again, and select OK.Change PIN codeBefore you can change your PIN code, you must enable PIN code request. See ""PIN code request," p. 72" p. 72.1. In the standby mode, select Menu > Settings > Security > Access codes > Change PIN code.2. Enter the current PIN code, and select OK.3. Enter the new PIN code, and select OK.4. Enter the new PIN code again, and select OK.Voice privacyVoice privacy is a network service. See ""Network Services," p. 5" p. 5. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone

Settings74FCC DRAFTcalls on your same network. In the standby mode, select Menu > Settings > Security > Voice privacy > On or Off.Personal unblocking key (PUK) codeThe PUK code is used to restore a blocked PIN code. The PUK code is 8 characters in length and cannot be changed. The PUK code must be obtained from your wireless service provider. Important: If you enter an incorrect PUK code 10 times in succession, the UIM card is rejected and can no longer be used. You must contact your wireless service provider for a new UIM card.■Application settings1. In the standby mode, select Menu > Settings > Application settings.2. Scroll to one of the following submenus to activate options for preset or downloaded games or applications.Application sounds—Select On or Off.Application lights—Select App. defined or Default.Application vibration—Select On or Off.■NetworkThe menu options you see in your device depend on your service provider’s network. The network determines which options actually appear in the device menu. Check with your service provider for more information.The Network menu enables you to customise the way your device chooses a network in which to operate while you are within or outside of your primary or home system. Your device is set to search for the most cost-effective network. If your device cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu.You can set your device to roam or search for another network when you are not in your home area.1. In the standby mode, select Menu > Settings > Network and one of the following options:Home only—You can make and receive calls in your home area only.

Settings75FCC DRAFTAutomatic A—The phone automatically searches for service in another digital network. The roaming rate applies when not in the home service area.Automatic B—The phone automatically searches for service in another digital network. With no service found, the device uses analog service. The roaming rate applies when not in the home service area.2. Select an option to confirm the activation.■Network servicesThe following features are network services. See ""Network Services," p. 5" p. 5.Store a feature code1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *633), and select OK. 3. Select the type of service that matches the feature code you entered (for example, Call divert).The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to the standby mode. When you enter a network feature code successfully, the feature becomes visible in the Network services menu. Call divertingCall diverting tells your network to redirect incoming calls to another number. Call diverting is a network service and may not work the same in all networks, so contact your wireless service provider for availability.ActivateThe following options may not all appear in the display. Contact your wireless service provider for more information.1. In the standby mode, select Menu > Settings > Network services > Call divert and one of the following options:Divert all calls—Divert all calls to the number you specify.

Settings76FCC DRAFTDivert if busy—Divert incoming calls when you are in a call.Divert if not answered—Divert incoming calls to another number if you are unable to answer. You can set a delay before diverting takes place.Divert if out of reach—Divert incoming calls when your device is off.2. Select Activate.3. Enter the number to which to divert your calls, and select OK.CancelIn the standby mode, select Menu > Settings > Network services > Call divert > Cancel all diverts. Cancel all diverts may affect your ability to receive voice mail messages. Contact your wireless service provider for specific details.Call waitingIf your wireless service provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.1. In the standby mode, select Menu > Settings > Network services > Call waiting > Activate or Cancel.2. During a call, select Answer, or press the call key or voice key to answer the waiting call. The first call is put on hold.3. Press the end key to end the active call.Send my caller IDIf your wireless service provider supports this feature, then you can prevent your number from appearing on the receiving party’s caller ID.In the standby mode, select Menu > Settings > Network services > Send my caller ID > Yes or No.View your own phone numberIn the standby mode, select Menu > Settings > Network services > My number selection.

Settings77FCC DRAFT■Restore settingsYou can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected).1. In the standby mode, select Menu > Settings > Restore settings..2. Enter the security code, and select OK. See ""Security settings," p. 71" p. 71.

Organiser78FCC DRAFT11. OrganiserYour device contains features to help organise your everyday life, including an alarm clock, calendar, notes, to-do list, calculator, countdown timer, and stopwatch.■Alarm clockIf the alarm time arrives with the device switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.Set or change alarm settingThe alarm clock depends on the device clock, which sounds an alert anytime you specify and even works with the device turned off.1. In the standby mode, select Menu > Organiser > Alarm clock > Alarm time > On.2. Enter the time for the alarm in hh:mm format. 3. Select am or pm (with 12-hour format selected), and select OK. Alarm on appears briefly in the display, and appears in the standby mode.Repeat alarmYou can set the alarm to repeat. In the standby mode, select Menu > Organiser > Alarm clock > Repeat alarm. Set the alarm toneYou can set which tone to play when the alarm sounds. In the standby mode, select Menu > Organiser > Alarm clock > Alarm tone > Standard, Radio, or Open Gallery to choose the tone you want to use.If you set your alarm to Radio, use an accessory that supports FM stereo.

Organiser80FCC DRAFTNote a specific dateYou can apply five types of notes to your calendar. Your device asks for further information depending on which note you choose. You also have the option to set an alarm for any note you select.1. Go to the date for which you want to set a reminder. See ""Go to a date," p. 79" p. 79.2. From the monthly view (with the go-to date highlighted), select Options > Make a note and one of the following note types:Meeting—Enter a subject, location, and a start/end date and time.Call—Enter a phone number, a name, and the date and time.Birthday—Enter the person’s name, date and year of birth.Memo—Enter a subject and a start/end date.Reminder—Enter the subject and date of your reminder.You are given the option to set an alarm.3. Enter your note, and select Save.View notes (day view)After you have created calendar notes, you can view them.1. In the standby mode, select Menu > Organiser > Calendar.2. Scroll to the date containing the note that appears in bold type, and select View.Options while viewing a list of notes1. Select Options while viewing a day’s note to display the following:The options listed below are available while viewing the header of a note. Make a note—Create a new note for the selected date.Delete—Delete the note.Edit—Edit the note.Move—Move the note to another date on your calendar.Repeat—Set the note (except for birthday note) to recur on a regular basis (daily, weekly, biweekly, monthly, and yearly).

Organiser81FCC DRAFTGo to date—Jump to another date on your calendar.Go to today—Jump to the current date on your calendar.Send note—Send the note to another device as a text message or in calendar-to-calendar format by way of SMS.Copy—Copy the note for you to paste to another date.Settings—Set the date and time, date and time format, the day each week starts and whether you want your notes to autodelete after a specified time.Go to to-do list—Jump to the to-do list on your calendar.2. Select an option to activate it or enter its submenu.Send a note1. In the standby mode, select Menu > Organiser > Calendar.2. Scroll to the date that appears in bold type, containing the note you want to send, and select View.3. Scroll to the note you want to send, and select Options > Send note > Send as message (Text message), Via calendar or Via infrared.4. If you selected Via calendar, enter the number for the recipient, or select Search to retrieve a number from the contacts list, and select OK. 5. If you selected Send as message (Text message), the note appears as a text message in the display. • Select Send to > Send to number, Send to e-mail, Send to many, or Send to distrib. list.• Enter the number for the recipient, or select Search to retrieve a number from the contacts list, and select Send.Receive notesWhen you receive a calendar note in calendar-to-calendar format, your device displays Calendar note received.• To view calendar notes, select Show, and if necessary, scroll to view the entire message. • To save calendar notes after viewing, select Options > Save.• To discard calendar notes after viewing, select Exit or Options > Discard.

Organiser82FCC DRAFTWhen you receive a calendar note or text message, a message notification appears in the standby mode. You can save the note in your calendar and set an alarm for any date and time.■NotesYou can write and save information in Notes and send notes using text message. In the standby mode, select Menu > Organiser > Notes. With no notes created, select Add note, create your note, and select Save when done. With notes already created, highlight the note you want to use, and select View to read or Options > Make a note, Delete, Edit, Send note (as a text message, via calendar, or via infrared), or Delete all notes.■To-do listUse the to-do list feature to keep track of your tasks. You can save a note for a task, select a priority level for the note and mark it as done when you have completed it. You can sort the notes by priority or by date. Add a to-do note1. In the standby mode, select Menu > Organiser > To-do list.2. If there are no notes, select Add note.3. Enter the subject of the to-do note, and select Save.4. Select High, Medium, or Low priority.5. Enter the due date and time to set the alarm.View a to-do note1. In the standby mode, select Menu > Organiser > To-do list.2. Highlight a to-do note, and select Options and one of the following:Add—Add another note.Delete—Delete the note.Mark note as done or Mark as not done—Mark a note or task as completed or not; if completed, no more reminders will follow.Sort by deadline—Sort the notes according to their deadline.

Organiser83FCC DRAFTSend—Send the note to another device, as a text message, or as a calendar note to another compatible device.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do note to a date on your calendar.Delete done notes—Delete all the completed to-do notes.Delete all notes—Delete all the to-do notes in the list.3. View the to-do note, and select Edit to edit the note or Options to select from the following:Deadline—Set a deadline for the note, listing any uncompleted notes if existing.Mark note as done or Mark as not done—Mark a note or task as completed or not; if completed, no more reminders will follow.Delete—Delete the note.Edit priority—Change the priority to high, medium, or low.Send—Send the note to another device, as a text message, or as a calendar note, or via infrared to another compatible device.Go to calendar—Leave the to-do list, and go to the calendar.Save to calendar—Save the to-do note to a date on your calendar.■CalculatorThe calculator in your device adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.Note: This calculator, designed for simple calculations, has limited accuracy.1. In the standby mode, select Menu > Organiser > Calculator.2. Enter the first number in the calculation. Press # for a decimal point if necessary.To change the sign, select Options > Change sign, or scroll up or down.To perform a square or square root calculation, select Options > Square or Square root.

Organiser84FCC DRAFTTo cycle through the add (+), subtract (-), multiply (*), and divide (/) characters, press *.3. Enter the second number in your calculation.4. Select Equals to complete calculation or Options if more functions are required. Currency converterYou can convert foreign currency to domestic, or vice versa, directly in the standby mode or from the Calculator menu.Note: When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero.1. In the standby mode, select Menu > Organiser > Calculator > Options > Exchange rate > Foreign unit in domestic units or Domestic unit in foreign units.Foreign unit in domestic units—The number of home units cost to make one unit of foreign currency.Domestic unit in foreign units—The number of foreign units cost to make one unit of your home currency.2. Enter the exchange rate (press # to insert a decimal), and select OK.3. In the standby mode, enter the currency amount to be converted.4. Select Options > In domestic or In foreign.In domestic—Converts foreign currency to domestic currency.In foreign—Converts domestic currency to foreign currency.5. If you do not enter an exchange rate, the device will prompt you to do so. Select OK. You can edit the exchange rate at anytime.■Countdown timerThe countdown timer in your device enables you to enter a specific time (up to 99 hours and 59 minutes). When the time runs out, your device sounds an alarm.Note: The countdown timer only works when the device is on. When you turn off your device, the timer is no longer active.

$Organiser85FCC DRAFTSet the timer1. In the standby mode, select Menu > Organiser > Timer > Normal timer, Interval timer, or Settings.Use Normal timer to measure the countdown time for tasks that have one period (timer name). Select Interval timer to save sets of countdown times with more than one period.2. Enter the time (in hh:mm:ss format), and select OK.3. Enter a note for the timer, and select Start. appears in the standby mode with the countdown timer set. When the time runs out, your device sounds an alarm, displays the timer note, vibrates (if set), and flashes its lights.Press any key during the alarm to stop the alarm. After 30 seconds the timer alert stops automatically.Change the timeAfter you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organiser > Timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was, or enter a new note, and select Start. Interrupt the timerAfter you have set the timer, you can stop the timer. In the standby mode, select Menu > Organiser > Timer > Stop timer.■StopwatchYou can use the stopwatch in your device to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life.Measure time1. In the standby mode, select Menu > Organiser > Stopwatch > Split timing or Lap timing > Start. The running time is displayed.$

Microsoft RM-96 CDMA/AMPS 800 Cellular Phone User Manual 6152 FCC DRAFT 091405

Microsoft Mobile Oy CDMA/AMPS 800 Cellular Phone 6152 FCC DRAFT 091405

Manual

Navigation menu

Namespaces

Views

Navigation