Microsoft WE04M Bluetooth Headset User Manual 9251888 en1

Download:
Mirror Download [FCC.gov]
Document ID	703787
Application ID	pbu1ugsq0XpEJqGpR4r7kA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.32kB (266529 bits)
Date Submitted	2006-09-12 00:00:00
Date Available	2007-01-26 00:00:00
Creation Date	2006-08-23 12:22:49
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2006-08-23 12:22:49
Document Title	9251888_en1.fm
Document Creator	PScript5.dll Version 5.2.2
Document Author:	rjp

9251888_en1.fm Page 1 Wednesday, August 23, 2006 12:18 PM
Nokia Bluetooth Headset BH-301
10
9251888/1
9251888_en1.fm Page 2 Wednesday, August 23, 2006 12:18 PM
ENGLISH
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that
this HS-51W product is in compliance with
the essential requirements and other
relevant provisions of Directive 1999/5/EC. A
copy of the Declaration of Conformity can be
found at http://www.nokia.com/phones/
declaration_of_conformity/.
0434
The crossed-out wheeled bin
means that within the European
Union the product must be taken
to separate collection at the
product end-of-life. Do not dispose
of these products as unsorted municipal
waste. For more information, see product
Eco-Declaration or country specific
information at www.nokia.com.
© 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution, or
storage of part or all of the contents in this
document in any form without the prior
written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are
registered trademarks of Nokia Corporation.
Other product and company names
mentioned herein may be trademarks or
tradenames of their respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of ongoing
development. Nokia reserves the right to
make changes and improvements to any of
the products described in this document
without prior notice.
To the maximum extent permitted by
applicable law, under no circumstances shall
Nokia or any of its licensors be responsible
for any loss of data or income or any special,
incidental, consequential or indirect
damages howsoever caused.
The contents of this document are provided
"as is". Except as required by applicable law,
no warranties of any kind, either express or
implied, including, but not limited to, the
implied warranties of merchantability and
fitness for a particular purpose, are made in
relation to the accuracy, reliability or
contents of this document. Nokia reserves
9251888_en1.fm Page 3 Wednesday, August 23, 2006 12:18 PM
ENGLISH
the right to revise this document or
withdraw it at any time without prior notice.
The availability of particular products may
vary by region. Please check with your Nokia
dealer for details.
Unauthorized changes or modifications to
this device may void the user's authority to
operate the equipment.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and other
countries. Diversion contrary to law is
prohibited.
Introduction
The Nokia Bluetooth Headset BH-301
allows you to make and receive calls
while on the move. You can use the
headset with compatible phones that
support Bluetooth wireless
technology.
Read this user guide carefully before
using the headset. Also read the user
guide for your phone, which provides
important safety and maintenance
information. Keep all accessories and
enhancements out of reach of small
children.
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
without cables. A Bluetooth
connection does not require that the
phone and the headset be in line of
sight, but both devices should be
within 10 meters (30 feet) of each
other. Connections may be subject to
interference from obstructions, such
as walls, or other electronic devices.
The headset complies with the
Bluetooth Specification 2.0 + EDR
9251888_en1.fm Page 4 Wednesday, August 23, 2006 12:18 PM
ENGLISH
that supports the Headset Profile 1.1
and Hands-Free Profile 1.5. Check
with the manufacturers of other
devices to determine their
compatibility with this headset.
There may be restrictions on using
Bluetooth technology in some
locations. Check with your local
authorities or service provider.
Get started
The headset contains the following
parts shown on the title page: volume
key (1), answer/end key (2), charger
connector (3), power key (4),
microphone (5), indicator light (6),
and earhook (7).
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the headset are magnetic.
Metallic materials may be attracted to
the headset. Do not place credit cards or
other magnetic storage media near the
headset, because information stored on
them may be erased.
Chargers
Check the model number of any charger
before using it with this headset. The
headset is intended for use with the
AC-3, AC-4, and DC-4 chargers.
Warning: Use only chargers
approved by Nokia for use
with this particular headset.
The use of any other types may invalidate
any approval or warranty and may be
dangerous.
For availability of approved
enhancements, please check with your
dealer. When you disconnect the power
cord of any enhancement, grasp and pull
the plug, not the cord.
9251888_en1.fm Page 5 Wednesday, August 23, 2006 12:18 PM
ENGLISH
Charge the battery
The headset has an internal,
nonremovable, rechargeable battery.
Do not attempt to remove the battery
from the headset, as you may damage
the headset.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector on the headset.
The red indicator light is on while
charging. It may take a while
before charging starts. If charging
does not start, connect the charger
again and retry. Charging the
battery fully may take up to
2 hours.
3. When the battery is fully charged,
the red indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 7 hours of talk-time or up to
200 hours of standby time. However,
the talk and standby times may vary
when the headset is used with
different mobile phones or other
compatible Bluetooth devices, usage
settings, usage styles, and
environments.
When battery power is low, the
headset sounds a series of beeps and
the red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the power
key until the green indicator light
starts to flash.
To switch off, press and hold the
power key until the red indicator light
is displayed briefly.
Pair the headset
1. Switch on your phone and the
headset.
9251888_en1.fm Page 6 Wednesday, August 23, 2006 12:18 PM
ENGLISH
2. Activate the Bluetooth feature on
the phone, and set the phone to
search for Bluetooth devices.
3. Select the headset from the list of
found devices.
4. Enter the passcode 0000 to pair
and connect the headset to your
phone. In some phones you may
need to make the connection
separately after pairing. You only
need to pair the headset with your
phone once.
If the pairing is successful, the
headset beeps and appears in the
phone menu where you can view the
currently paired Bluetooth devices.
To disconnect the headset from your
phone, switch off the headset or
disconnect it in the Bluetooth menu of
your phone.
To connect the headset to your phone,
make the connection in the Bluetooth
menu of your phone. To set your
phone to connect with the headset
automatically when the headset is
switched on, change your paired
device settings in the Bluetooth menu.
Basic use
Wear the headset
Change the cover
Slide the headset around your ear, and
point it toward your mouth (8).
To remove the current cover, lift it
from the headset starting from the
microphone end (9). To attach a new
cover, carefully press it into place (10).
9251888_en1.fm Page 7 Wednesday, August 23, 2006 12:18 PM
ENGLISH
Call handling
To make a call, use your phone in the
normal way when the headset is
connected to your phone.
If your phone supports last number
redialing with the headset, press the
answer/end key twice briefly while no
call is in progress.
To answer or end a call, press the
answer/end key. To reject the call,
briefly press the answer/end key
twice.
To switch the call between the
headset and a compatible Nokia
phone, press and hold the answer/end
key.
To adjust the headset volume, press
the volume key up or down.
Clear the settings or reset the
headset
To clear the settings, press and hold
the power key and the answer/end key
over 10 seconds.
To reset the headset if it does not
function properly, although it is
charged, plug the headset into a
charger, and briefly press the power
key and the answer/end key at the
same time.
Battery information
Your headset is powered by a
rechargeable battery. The battery can be
charged and discharged hundreds of
times, but it will eventually wear out.
Recharge your battery only with Nokia
approved chargers designated for this
headset.
Unplug the charger from the electrical
plug and the headset when not in use. Do
not leave a fully charged battery
9251888_en1.fm Page 8 Wednesday, August 23, 2006 12:18 PM
ENGLISH
connected to a charger, since
overcharging may shorten its lifetime. If
left unused, a fully charged battery will
lose its charge over time.
Never use any charger that is damaged.
Leaving the headset in hot or cold places,
such as in a closed car in summer or
winter conditions, will reduce the
capacity and lifetime of the battery.
Always try to keep the battery between
15°C and 25°C (59°F and 77°F). A headset
with a hot or cold battery may not work
temporarily, even when the battery is
fully charged. Battery performance is
particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged. Dispose of batteries
according to local regulations. Please
recycle when possible. Do not dispose as
household waste.
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The following
suggestions will help you protect your
warranty coverage.
• Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
• Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
• Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
batteries, and warp or melt certain
plastics.
9251888_en1.fm Page 9 Wednesday, August 23, 2006 12:18 PM
ENGLISH
• Do not store the device in cold areas.
When the device returns to its normal
temperature, moisture can form
inside the device and damage
electronic circuit boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
• Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
All of the above suggestions apply
equally to your device, battery, charger,
or any enhancement. If any device is not
working properly, take it to the nearest
authorized service facility for service.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2006:08:23 12:22:49+03:00
Modify Date                     : 2006:08:23 12:22:49+03:00
Page Count                      : 9
Creation Date                   : 2006:08:23 09:22:49Z
Mod Date                        : 2006:08:23 09:22:49Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : rjp
Metadata Date                   : 2006:08:23 09:22:49Z
Creator                         : rjp
Title                           : 9251888_en1.fm

EXIF Metadata provided by EXIF.tools