Microtek Electronics PS37-4 Video and Audio Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	261936
Application ID	xa3WmmJgIDlYS+aTvNOXhg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.74kB (684193 bits)
Date Submitted	2002-08-07 00:00:00
Date Available	2002-08-07 00:00:00
Creation Date	2002-07-02 09:59:54
Producing Software	Acrobat 5.0 Image Conversion Plug-in for Windows
Document Lastmod	2002-07-02 10:04:27
Document Title	Users Manual
Document Creator	Acrobat 5.0 Image Conversion Plug-in for Windows

MICROTEK LIMITED WARRANTY
. Microtek Electronics extends the following LIMITED WARRANTY to the
' original owner/purchaser of this product:
1)
3)
If, within two years afier date of initial sale, this product, or any part or
portion thereof, shall prove upon examination by MICROTEK, to be
defective in material or workmanship, MICROTEK will repair or replace
such part or portion at MICROTEK’s option. The Warranty period on the
repaired or replaced part or portion of this product shall be limited to the
unexpired term of the original warranty. The buyer shall be responsible
for all shipping and transportation of the product to MICROTEK for any
performance under this warranty.
Conditions and Exceptions:
a) Any accident to this product, any misuse or abuse, alternation, use in
modified form, or any attempt to repair this product shall void this
warranty. These conditions to the warranty include, but are not
limited to, incorrect power connections, physical damage due to
mechanical shock, exposure to moisture, and circuit modification.
SHOULD THIS PRODUCT PROVE DEFECTIVE FOLLOWING
PURCHASE, THE BUYER, NOT THE MANUFACTURER,
DISTRIBUTOR, OR RETAILER, ASSUMES THE ENTIRE COST
OF ALL SERVICING OR REPAIR, EXCEPT AS OTHERWISE
PROVIDED BY THE TERMS OF THIS WARRANTY.
FOR BREACH OF ANY WRITTEN OR MLIED WARRANTY
ON THIS PRODUCT, II—[E BUYER lS LIMITED TO THE
FOLLOWING DAMAGES. (I) THE COST OF LABOR T0
REPAIR OR REPLACE DEFECTIVE PARTS OR PORTIONS OF
THIS PRODUCT, AND (2) THE. COST OF THE REPAI'RED OR
REPLACE PARTS OR PORTIONS OF THIS PRODUCT.
NO OTHER EXPRESSED OR IMPLIED WARRANTIES HAVE
BEEN MADE OR WILL BE MADE ON BEHALF OF M'ICROTEK
WITH RESPECT TO THE SALE, REPAR, INSTALLATION,
OPERATION, OR REPLACEMENT OR THIS PRODUCT.
MICROTEK DISCLAIMS ANY IMPLIED WARRANTY OF
MERCHANTABILITY OF THIS PRODUCT OR lTS FITNESS
FOR ANY PURPOSE. AND THE BUYER AGREES THAT THIS
PRODUCT IS SOLD “AS IS" AND THAT THE ENTIRE RISK OF
QUALITY AND PERFORMANCE OF THIS PRODUCT IS WITH
Tl-HS BUYER, EXCEPT AS OTHERWISE PROVIDED BY THE
TERMS OF THIS WARRANT Y,
Some states/jurisdictions do not allow exclusions or limitations of
incidental or consequential damages. or limitations on how long an
implied warranty lasts, so the above exclusions or limitations may not
apply to you,
Contact your dealer regarding return authorization for out of warranty
repairs and any further product information.
Microtek Electronics, Inc.
PO, Box 3464, San Clemente, CA 92672
Information Hotline 888-36-MICRO
nu ma
¢\
—\
MICRdl—EK THE INTELLIGENT ALTERNATIVE.
ELECTRONICS, INC.
MINILINK 5.8T
Microwave Video/Audio Transmitter
The Minilink n-ansmitter system allows transmissions of wireless signals
item a remote location to a monitor or a VCR.
The system uses advanced micro circuitry for a compact miniature
design, all packaged within a rugged metal case.
The Minilink transmitter’s output frequency is user selectable to
one of ten fiequencies in the 5725 mHz— 5875 ml-Iz band.
FCC NOTICE
This equipment has been tested and found to comply with the limits of a Class B
device, pursuant to PART 15C of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference.
This equipment generates, uses and can radiate radio fi'equency energy, and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for help,
Any changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment
OPERATION
The Minilink 5.8 transmitter is designed to be used in conjunction with a
compatible receiver. Refer to the instructions accompanying your receiver for
proper installation of that unit.
LOCATION:
- The Minilink has been designed to be mounted against a flat surface for
support and stability. (Note: The loco/ion selected for mounting the Minilink
should be protected farm immersion in water unlesss enclosed in a watertight
enclosure, and should have a moderate shock protection.)
POWER:
- The Minilink is powered by a 6-145 VDC power supply connected to
the Power In connector on the rear of the case.
The transmitter incorporates internal reverse voltage protection.
Channel Select:
0 Channel selection is accomplished by programming of the 4 position dip
Switch located at the rear panel. Switch and frequency settings are
listed on the label adjacent to the switch access.
Audio Select:
- Audio mode selection is enabled by programming the 2 position dip
Switch located at the rear panel. Switch settings are listed on the rear
label adjacent to the switch access.
The Audio In connector can be used for either line or microphone input
levels. If an electret microphone is used, the second switch position can
be selected to supply +5 V to the electret element. The +5V microphone
supply should be disabled for dynamic microphone or line input uses.
SETUP & OPERATION:
- Select Frequency and Audio mode.
- Connect Power, Video and Audio inputs.
- Position for desired polarity using rear label arrow as a reference,
transmitter and receiver polarity must match one another.
MAINTENANCE
Your Microtek Electronics product is an example of superior design
and craftsmanship. The following suggestions will help to ensure
maximum operational life.
0 Keep the product dry. If it does get wet, wipe it dry immediately.
Liquids may contain minerals than corrode electronic circuits.
- Use the system only within the environmental specifications indicated
below. High temperatures can shorten the life of electronic devices and
melt plastic parts.
0 Excessive mechanical shock can damage the case, connectors, or
internal circuit board.
SPECIFICATIONS 5.8T*
2.75" x 2.75” x 1.6”
Weight: 8.1 oz.
6-14.5 VDC @ 68 mA
-20°F to 180 91“ Case Temperature
Dimensions:
Power Requirements:
Operating Temperature:
Humidity: 95% non-condensing
Power Output: 50 mV/Meter @ 3 Meters
Connections: Power Supply, Video, Audio
Transmitting Frequency: 5741, 5754, 5767, 5780, 5793, 5806, 5819,
5832, 5845, 5858 mHz
Video Input: 1 Volt P—P @75 Ohms
Audio Input: Line level ,5 Volt P-P @ 10K Ohms
Microphone Level 50 mV P-P
Pre—emphasis CCl'R 405—1
FCC ID: JRR-PS37—4
*Specifications subject to change without notice

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2002:07:02 10:04:27-07:00
Create Date                     : 2002:07:02 09:59:54-07:00
Creator                         : Acrobat 5.0 Image Conversion Plug-in for Windows
Page Count                      : 2
Mod Date                        : 2002:07:02 10:04:27-07:00
Creation Date                   : 2002:07:02 09:59:54-07:00
Producer                        : Acrobat 5.0 Image Conversion Plug-in for Windows
Metadata Date                   : 2002:07:02 10:04:27-07:00

EXIF Metadata provided by EXIF.tools