8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 70446 |
| Application ID | xY9cFrzE5FKHyPlZauR0QA== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.25kB (365681 bits) |
| Date Submitted | 1999-11-17 00:00:00 |
| Date Available | 1998-09-29 00:00:00 |
| Creation Date | 2001-05-15 19:47:51 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-05-15 19:48:00 |
| Document Title | 70446.pdf |
| Document Author: | VicodinES /CB /TNN |
Page 37
Microtek International Inc. Image Scanner FCC ID. : EF9MRS-1200X6U
EXHIBIT 5
User‘s Manual
User‘s Manual
Microtek Scanner
ation Guide
for ScanMaker X6 USB
Instal
Basic Requirements
- Penlium (or Compatibles) with
built-in USB supported BIOS system
' MiCrUSOfl Windows QB
- (DD—ROM drive (internal or external)
FCC IDv : EF9MRS-1200X6U
- 16ME RAM
' At least 40MB hard dlsk with 15MB available
- Super VGA Color display wilh 256 colors or better
Important Nola: Baler. “In: (In team-tr and software, yau should road this Mlmhk Scum-tr
Installation Guido um.
_, Unpack yo scanner and check co ponents
Contents Open your scanner package and check the
components as slalzd m your packing list. Do Nol
Unpachyguy 5mm.“ and check componmu, W W ,. _ 1 install any of the software umil [ht hardware has
been mslzlled. ¢_
Installing under Windows 98“. .. 2
Before procaeding any further, check that you have
Stzp 1 Connect the scanner to your computerwm 2 all the illustralcd items below
51217 2 lnslall the scanner software .. A, ., 2 Scanner
Step 3 Test your scanner ....., 4 inerCovd
Troubleshooting ..... .. 6 %
(ID-ROM USB Cable
Cupyngmra 1995 Mlcwlek Europa, svv. nan/wwumicmeml Duc.Na|49m2222
gum pms 1
i 8/10/95, s 2! PM
Installin under Windows 98
1.
Verify the presence of
USB
Turn on your computer and check to see if USB
is implemented.
Visually inspect the USB ports at your computer
USE Forts
If you cannot [ind the USE porLs at the back of
your computer, read the documentation that
came with your computer main board. If the
USB connector is available, though unwired, you
need to purchase an USB cable that connects
one end to your main board, another and to the
extension bracket.
For computer main board with USB
supported: To enter BIOS settings and enable
USB, see the documentation that came With
your computer. Normally when the computer
power is turned on, before starting Windows
98. the computer will hint you to press some
keys for displaying BIOS menu.
For computer main board without USB
supported. In thts case, USB can be
implemented by an USB add—on card The BIOS
settings for main board type USB are not
required.
2 Connect the scanner to
your computer
1. Connect USB connector to your PC, another
end to your ScanMaker X6 USE.
2, Connect the Power of ScanMaker X6 USB
scanner.
Lusqspms
’ 4»
males, mam
<+>
3 An Unknown Devtce message appears, asking 6. From the “Add New Hardware Wizard" drzlog
you to Search a new devtce box, cltck “Nzxt” to dtsplay the followmg screen
English
On the above screen, E:\ indicates [be default
Click Next to Conlinue. CD-ROM drtve Iucatron. Click Browse if your
CD-ROM drive is elsewherz. Clrck Next to
4 Click “Search for the best dnvsr [or your device Connnug_
(Racommnndcd).n to start searchmg‘
7 Your scanner rs automatically detected, Click
Next to cuntmuer
5. Insert the Mtcrotek CD-ROM Into your CD—
ROM dnve.
LBW Els your CD-HOM drivc localicn.
ausssms 3 4 mutant an m
You are now ready to install ScanVVizard driver
program.
Install Mierolek Sclnwlllrd
Microtek ScanWtzard IS the Twain driver used [or
the scanner to communicate with various
applications Micmtek ScanWtzard cannot be used
by ilsell and requires another program in order to
work
1. Select the “Micmtck ScanWizard" option to
start installation pruccdure,
2. Follow scrcen mstmctions to Complete
mstallation. When mstallatton is completed,
Microlek ScanWizard for Windows 98
appears as a folder on the Programs menu.
Install sottwau applleatinn
Install each software application by clicking on the
mdwidual program options.
Inslall documentallon loader
Click Adobe Acrobat Reader, then follow screen
lnSn'utlmnS until installatron ts completed. Acrobat
Reader is necessary [or reading the manuals on
your CD—ROM.
{s IH
Ll III
3. Test your scanner
1. Restart Windows 98 Click Stan, Settings, and
select Control Panel.
2. Double-click on the System icon in Control
Panel. then select Device Manager from the
top
3 Double-click on “Mrc'mrek USB Scanner", you
can find “ScanMaker X6" is listed. The scanner is
ready to scan.
4. Stan up Scanner Test [mm the Micrctek
ScanWizard [or Windows 98 folder in the
Programs menur When started up successfully,
the screen below appears.
544st we 4
males, sen PM
Click the Flatbed button.
Place your document lace down on the scanner
glass The top left comer of the document
should be at the “0,0" position on the ruler
guides runnmg alongside the scanner
A prevrew of your image will be displayed in the
Microtek Scan'l'est wmdow.
Close and exit Mlcrotek ScanTest.
To scan the document, start up your software
applrcation to bring up the Microtek
ScanWtzard, click rm the Scan button In the
Preview wmdow, The lmage will be scanned and
deltvered w your software application, where it
can be saved as a file.
For more demrls on how to operate your
scanner with Mrcrotek ScanW‘tzard, refer to the
Mrcmtelz ScanW1zard Reference Manual in your
CD-ROM,
E_us$s was
5 <§
mom, 5-25 pm
gum we
Trou es
{g
0 9
If WmClOWS 98 cannot detect USE devtce, follow the If an yellow attention mark appears in front of
steps below the“lntel 82371AB PCI to USB Universal Host
‘ Controller" string, (hrs means the driver —— Intel
lv Restart Windows 93 Select Start, Setunge, and 82371 dmfi E m“ “(annually installed.
Control Panel. Double-click the System men,
a Enmul Mn ”gum ’
[ll E“ lflfl Bib“
11“th MN... Mm. pm». 0m
Dunn-J karma nan...
get a i; at ea
imam m.“ Mod-r-
E‘Q 933 ilk
Nlmfi Mum-k P-mfl
“2; ”gift - 31:1."
Hmulut-hunwh
(n
A, mun-t ..
Tht: System Properties dialog box appears. Click
the Device Manager tab.
Double—click “Unwersal serial bus controller"
to display two-line messages indicating the
detected chipset mlol For example, "Intel For exam 12 mm l is shown as Fi ur
82371AB PC] to USB Universal Host 1 Y b P (”W1 1, P“ 33 h g °
Controller" and "USB Rout Hub”. ' ou ave W0 so u tons ppmac ‘
Solution 1: Automatic setting
syn... man..."
I, Slect 111121823711“! PCI to USB
Universal HOS! Controller.
fl gamma 2. Click Remove bullon‘
$3 glizm'fik‘ 3 Restan thdo 5 98 you computer should
»— _ ‘ , w , r
322? 5734233“. be able to detect the presence of Scanaker
L‘élfi". x5 USE scanner.
e m.
7 ” mafia, Solution 2: Manual setting
ma, “a m m- was"
em SKI-now:-
UMK‘lHdM-{wih'fl 1. Select Intel 82371AB PCI to USB
azmmwwwm Universal Host Controller
‘ zt Click Remove button.
s mam. G 28 PM
3 To fix the problem, double-click the
“Universal serial bus controller" string (0
display the following dialog box.
Dwain-om lewd-l Wfimhhfixm
Uflddlflnvu .
4. Click “Updaie Driver” lo display the driver
selection dialog box
ups.“- nmi Diiuv Wm:
”E-
nun-am
mm use no)
(slmteusa u.- rm
5, Al [he lell column, select “Intel"; the message
“Intel 8237 [AB PCI to USB Universal Host
Controller" will appear at right column.
Click Finish to Exit
6. Restart Windows 98, your computer should
be able to deiecl the presence ei ScanMaker
X6 USB scanner.
gussepms
’ <9
81mm, 5-25 PM
Mai/i
its is , ”7M? 1:
Federal Communications Commission (Foe) statement
This equipment has been tested and found to comply with the limits for a Class E digital device, pursuant
to Part 15 of the FCC Rules, These limits are designed to prciVide reasmnahle protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and. ifnot installed and used in accordance with the instructions, may cause harmful interference [0
radio communications. However, there is no guarantee that interference will not occur in a particular
installation, if this equipment does cause harmful interference to radio or teleVision reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures
- Remnant/relocate the receivmg antenna
e increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
- Consult the dealer or an experienced radio/TV technician for help.
New Shielded interface cable Withjerrite care installed on scanner connector end must be used with this
equipment.
Trade Name Model Name
SCanMaker X6 MRS—[ZOOXGU
Changes or modifications not expressly appmvsd by the manulamurer responsible for
compliance could void the users authorily In operate the equipment.
gases pens a mans seam
Product Name
Model number
Type
Resolution
Sample depth
Calibration lime
Scanning speed
Transmission speed
Scanning Area
Minimum
Maximum
Warm up time
Power Supply
Voltage Frequency
Power Consumpiion
Dimensions
Weight
ScanMaker X6
M RS- 1 2 OOXGU
Desktop, Flatbed, Single pass
600 dpi(H) x 1200dpi(V)
12 bits per color
7sec. (gray)
lSsec. (color)
in speed mode
lindgray color: 48 ms/line
in quality mode
line/gray color: 6 5 ms/line
PreView <205 (lellex size)
ZMbyie/s
16 pixels x 16 pixels
215mm x 297mm
(8.5" x 11.7")
”sec
3mm. [or image quality level
100 V to 7.40 V(-10% lo +1096)
47 Hz to 63 Hz
30W max
11.5" x 3,2" x 17.3"
3.5kg
54.595 pm; 9
¢ nan/50, 5:23 PM
English
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:05:15 19:47:51 Producer : Acrobat Distiller 4.0 for Windows Author : VicodinES /CB /TNN Title : 70446.pdf Modify Date : 2001:05:15 19:48:00-04:00 Page Count : 10EXIF Metadata provided by EXIF.tools