Microwave Radio Communications L32112GAMP Booster Amp User Manual L3211

Microwave Radio Communications LLC Booster Amp L3211

L3211 User Manual

PUBLIC SAFEYVISLINK News and EntertainmentOverviewThe L3211 Barrel Booster has been specically tailored for wireless camera back applications. Designed to t directly onto the RF output from the Link range of transmitters, this unit is small, lightweight and easy to use. This amplier includes ALC (Automatic Level Control) in order to provide a constant RF output power for all transmitter power level settings. The L3211 has a wide DC operating range (9-28V) and can be powered via the RF input connector* or using the Lemo power cables supplied with the unit. These power cables allow the option to connect to the Lemo power socket on the wireless transmitter or to the D-Tap adaptor from an IDX or Anton Bauer battery plate.Incorporating LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection, integral harmonic ltering and a power save mode this amplier is a must have addition to any wireless camera system where extended range is required.* Switchable phantom power to the L3211 barrel booster is provide in the L1530-1927 RF module.L3211Barrel BoosterBarrel BoosterFeatures• Boosts RF transmitter power for extended range.• Provides optimal trade-off between transmit power, DC power consumption and spectral efciency.• Small, light-weight & robust construction.• Designed to mate directly to the Link range of camera back transmitters.• Incorporates LDPD (Link Digital Pre-Distortion) for improved adjacent channel rejection.• Includes input and output RF harmonic lters to ensure regulatory compliance.• ALC (Automatic Level Control) maintains a constant RF output for all transmitter settings.• Can also be operated as a xed gain power amplier for user dened RF output powers.• RF output fully protected against mis-match damage.• Powered via RF input connector or external Lemo connector.• Power save mode when RF muted.• Wide DC (9-28V) operating range.• Tri-colour LED indicates unit status and RF output mode setting.
www.vislink.com© 2011 Vislink Group. All rights reserved. All other products or services referenced herein are identied by the trademarks or service marks of their respective companies or organizations. Note: Vislink reserves the right to change specications without notice. Please contact your representative to conrm current specications. Document 10 / 7 / 2011SpecicationsElectrical At 20±5°C ambientParameter Conditions Min Typ Max Units CommentFrequency Range L3211-2027 2000 – 2700 MHz L3211-6475 6400 - 7500 MHz Does not include LDPDRF Output Power ALC Mode +28 (0.63) 28.75(0.75) +30 (1.0) dBm (W)RF Input Power Range ALC Mode +10 (10) – +24 (250) dBm (mW)Gain Fixed Gain Mode 10 – 15 dBSpectral Regrowth Adjacent Channel – – -40 dBc EN 302 064-1 §7.3.4Alternate Channe – – -46Spurious 25MHz – 1GHz – – 0.25(-36) nW(dBm) EN 302 064-1 §7.4.61GHz – 27GHz – – 1(-30)Return Loss – 10 – dBRF InputDamage Level CW +27 (0.5) dBm (W)Pulsed +36 (4)Static Protection Direct Discharge 8 kV IEC61000-4-2Air Discharge 15Temperature Rise Above Ambient 32 ºC IEC60417-5041Supply Voltage 9 28 VPower Consumption RF OFF 7.5 WRF ON 14 WComplianceStandard Class/Category VersionETSI EN 302 064-1 Category 1 V1.1.2ETSI EN 301 489-28 Class B V1.1.1EnvironmentalOperating Temperature (Portable Equipment)• -10°C to +50°CStorage Temperature• -20°C to +80°CHumidity • 95%• Non-CondensingIP Rating• 54Mechanical RF/DC Input Connector• 50Ω N Type (M)RF Output Connector• 50Ω N Type (F)Power Connector• 6-Pin Lemo SocketPhantom Power • Applied to RF Input ConnectorWeight• 0.32Kg Length• 106mm (inc. connectors)Diameter• 62mmStatus Indicator• Green (DC Power/ALC OK)• Orange (DC Power OK/Fixed Gain)Power Connector 6-Pin Lemo SocketL3211 Socket• EEG.OB.306 CLVMating Plug• FGG.0B.306 CLA (straight)• FHG.0B.306 CLA (right-angle)Pin Out• 1 & 2: GND, 3 & 4: +VE, 5 & 6: NCNote: When operating the barrel booster in the ‘Fixed Gain’ mode the RF output power is no longer controlled by the barrel booster’s ALC and therefore it is the operator’s responsibility to ensure that the RF drive into the barrel booster is at an appropriate level not to cause over-drive or damage and to maintain regulatory compliance.Hot surface, do not touch barrel booster heat sink surface during operation.The barrel booster is supplied with 2 complimentary power cables from the options listed belowPN:9003434 Barrel Booster ALC Power Cable (Lemo straight)Pn:9003435 Barrel Booster ALC Power Cable (IDX D-TAP)Pn:9003437 Barrel Booster ALC Power Cable (Anton Bauer P-TAP)Pn:9003438 Barrel Booster ALC Power Cable (Lemo right-angle)

Navigation menu