Midea Kitchen Appliances EMB17GYY Microwave Oven User Manual VG8EMB17GYY rev

Guangdong Midea Kitchen Appliances Manufacturing Co.,Ltd Microwave Oven VG8EMB17GYY rev

Contents

VG8EMB17GYY_User Manual-rev

SAVE THESE INSTRUCTIONS CAREFULLYRead these instructions carefully before using yourmicrowave oven, and keep it carefully.If you follow the instructions, your oven will provide you withmany years of good service.Model:EMB17G4V-S
SpecificationsModel:. 29.3kg340mm5Rated Voltage:Rated Input Power(Microwave):Rated Output Power(Microwave):Oven Capacity:External Dimensions:Net Weight:V~60HzApproxEMB17G4V-S3200W2100W208/230420 6317LPRECAUTIONS TO AVOID POSSIBLEEXPOSURE TO EXCESSIVE MICROWAVEENERGY(a) Do not attempt to operate this oven with the door open since operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks.(b) Do not place any object between the oven front face and the door or allows soil or cleaner residue to accumulate on sealing surfaces.(c) Do not operate the oven if it is damaged. It is particular important that the oven door close properly and that there is no damage to the: (1) DOOR (bent) (2) HINGES AND LATCHES (broken or loosened)(3) DOOR SEALS AND SEALING SURFACE(d) The oven should not be adjusted or repaired by anyone except properly qualified service personnel.open-door Sly2
WARNING -1. Read all instructions before using the appliance.2. Read and follow the specific: EXCESSIVE MICROWAVE ENERGY" found on page 2.combustible materials are placed inside the oven to facilitate cooking. only to properly grounded outlet. See found on page 5 . accordance with the provided installationinstructions.To reduce the risk of burns, electric shock, fire, injury to persons or exposureto excessive microwave energy:3. This appliance must be grounded. Connect"PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO" GROUNDING INSTRUCTIONS"4. Install or locate this appliance only in5. Some products such as whole eggs and sealed containers - for example, closed glassjars - are able to explode and should not be heated in this oven.6. Use this appliance only for its intended use as described in the manual. Do not usecorrosive chemicals or vapors in this appliance. This type of oven is specificallydesigned to heat, cook or dry food. It is not designed for industrial or laboratory use. supervision is necessary when used by children.7. As with any appliance, close damaged cord or plug, if it is not working properly, or if it has been damaged or dropped.8. Do not operate this appliance if it has a by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment.9. This appliance should be serviced only10. Do not cover or block any openings on the appliance.11. Do not store this appliance outdoors. Do not use this product near water - for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar location.1 . Do not immerse cord or plug in water.21 . Keep cord away from heated surface.14. Do not let cord hang over edge of table or counter.315. When cleaning surfaces of door and oven that comes together on closing the door,16. To reduce the risk of fire in the oven cavity:1). Do not overcook food. Carefully attend appliance when paper, plastic, or other2). Remove wire twist-ties from paper or plastic bag before placing bag in oven.3). If material inside of the oven ignite, keep oven door closed, turn oven off, anddisconnect the power cord, shut off power at the fuse or circuit breaker panel.4). Do not use the cavity for storage purposes. Do not leave paper products, cookingutensils, or food in the cavity when not in use. point without appearing to be boiling. Visible bubbling or boiling when the container is removed from the microwave oven is not always present. 17. Liquids, such as water, coffee, or tea are able to be overheated beyond the boilingIMPORTANT SAFETY INSTRUCTIONSprecautions should be followed, includingWhen using electrical appliances basic safetyfollowing:the use only mild, nonabrasive soaps, or detergent applied with a sponge or soft cloth.or 3
stand in the microwave oven for a short time before removing the container.spoon or other utensil into the container.This appliance must be grounded. In the event of an electrical short circuit, groundingof electric shock by providing an escape wire for theappliance is equipped with a cord having a plugged into an outlet that is properly installed and grounded.GROUNDING INSTRUCTIONSTHIS COULD RESULT IN VERY HOT LIQUID SUDDENLY BOILING OVER WHENTHE CONTAINER IS DISTURBED OR A UTENSIL IS INSERTED INTO THE LIQUID.To reduce the risk of injury to persons:1) Do not overheat the liquid.2) Stir the liquid both before and halfway through heating it.3) Do not use straight-sided containers with narrow necks.4) After heating, allow the container to5) Use extreme care when inserting agrounding wire with a grounding plug.reduces the risk electric current. This The plugWARNING - Improper use of the grounding can result in a risk of electric shock.Consult a qualified electrician or serviceman if the grounding instructions are not completely or if doubt exists as to whether the appliance is properly grounded.extension cord, use only a 3-wire extension cord that has aThe marked rating of the extension cord shall be equal to or greater than the electricalappliance.understood,If it is necessary to use an3-blade grounded plug, and 3-slot receptacle that will accept the plug on the appliance.rating of theElectric Shock HazardTouching some of the internal components can cause serious personal injury or death.disassemble this appliance.DANGER - Do notElectric Shock HazardImproper use of the grounding can result in electric shock. Do not plug into an outlet untilappliance is properly installed and grounded.WARNING -1. A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.2. Longer cord sets or extension cords are available and may be used if care is exercised in their use.3. If a long cord or extension cord is used: 1) The marked electrical rating of the cord set or extension cord should be at least asgreat as the electrical rating of the appliance. 2) The extension cord must be a grounding-type 3-wire cord. 3) The longer cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over unintentionally.SA E THESE INSTRUCTIONS-must beV4
SAFETY1. The oven must be on a leveled surface.2. The turntable and turntable roller rest must be in the oven during cooking. Place the cookware gently on the turntable and handle it carefully to avoid possible breakage.3. Incorrect use of browning dish may cause the turntable to break.4. Use only the specified bag size when using Direct Access Popcorn.5. The oven has several built-in safety switches to ensure that the power remains off when the door is open. Do not tamper with these switches.6. Do not operate the microwave oven empty. Operating the oven with no food or food that is extremely low in moisture can cause fire, charring or sparking.7. Do not cook bacon directly on the turntable. Excessive local heating of the turntable may cause the turntable to break.8. Do not heat baby bottles or baby food in the microwave oven. Uneven heating may occur and could cause physical injury.9. Do not heat narrow-necked containers, such as syrup bottles.1. Operation of the microwave oven may cause interference to your radio, TV or similar2. When there is interference, it may be reduced or eliminated by taking the following 1) Clean door and sealing surface of the oven 2) Reorient the receiving antenna of radio or television. 3) Relocate the microwave oven with respect to the receiver. 4) Move the microwave oven away from the receiver. 5) Plug the microwave oven into a different outlet so that microwave ovenare on different branch circuits.RADIO INTERFERENCEequipment.measures: and receiver10. Do not attempt to deep-fry in your microwave oven.11. Do not attempt home canning in this microwave oven, as it is impossible to be sure all contents of the jar have reached boiling temperature.5
Personal Injury HazardTightly-closed utensils could explode. Closed containers should be opened and plasticpierced before cooking.Utensil T est:1. Fill a microwave-safe container with 1 cup of cold water (250ml) along with the2. Cook on maximum power for 1 minute.3. Carefully feel the utensil. If the empty utensil is warm, do not use it for microwave4. Do not exceed 1 minute cooking time.UTENSILSSee the instructions on "Materials you can use in microwave oven or to be avoided inThere may be certain non-metallic utensils that are not safe to use for microwaving. Ifutensil in question following the procedure below.CAUTION -pouches should bemicrowave oven."in doubt, you can test theutensil in question.cooking.12. Do not use this microwave oven for commercial purpose. This microwave oven is made for household use only.13. To prevent delayed eruptive boiling of hot liquids and beverages or scalding yourself, stir liquid before placing the container in the oven and again halfway through cooking time. Let stand in the oven for a short time and stir again before removing the container.14. Use carefully when cooking food in the microwave oven to avoid burning due to excessive cooking.15. When the appliance is operated in the combination mode, children should only use the oven under adult supervision due to the temperatures generated.16. Failure to maintain the oven in a clean condition could lead to deterioration that could adversely affect the life of the appliance and possibly result in a hazardous situation.6
Materials you can use in microwave ovenUtensils RemarksAluminum foil Shielding only. Small smooth pieces can be used to cover thin parts ofmeat or poultry to prevent overcooking. Arcing can occur if foil is tooclose to oven walls. The foil should be at least 1 inch (2.5cm) away fromoven walls.Follow manufacturer* instructions. The bottom of browning dish must beat least 3/16 inch (5mm) above the turntable. Incorrect usage may causethe turntable to break.Microwave-safe only. Follow manufacturer's instructions. Do not usecracked or chipped dishes.Always remove lid. Use only to heat food until just warm. Most glass jarsare not heat resistant and may break.Heat-resistant oven glassware only. Make sure there is no metallic trim.Do not use cracked or chipped dishes.Follow manufacturer* instructions. Do not close with metal tie. Makeslits to allow steam to escape.Use for short*erm cooking/warming only. Do not leave oven unattendedwhile cooking.Use to cover food for reheating and absorbing fat. Use with supervisionfor a short-term cooking only.Use as a cover to prevent splattering or a wrap for steaming.Microwave-safe only. Follow the manufacturer* instructions. Should belabeled "Microwave Safe". Some plastic containers soften, as the foodinside gets hot. "Boiling bags" and tightly closed plastic bags should beslit, pierced or vented as directed by package.Microwave-safe only. Use to cover food during cooking to retainmoisture. Do not allow plastic wrap to touch food.Thermometers Microwave-safe only (meat and candy thermometers).Wax paper Use as a cover to prevent splattering and retain moisture.Browning dishGlass jarsGlasswareOven cookingbagsPaper platesand cupsPaper towelsParchmentpaperPlasticPlastic wrapDinnerwareMaterials to be avoided in microwave ovenUtensils RemarksAluminum trayFood carton withmetal handleMetal or metal-trimmed utensilsMetal twist tiesPaper bagsPlastic foamWoodMetal shields the food from microwave energy. Metal trim maycause arcing.May cause a fire in the oven.Plastic foam may melt or contaminate the liquid inside when exposedto high temperature.Wood will dry out when used in the microwave oven and may splitor crack.May cause arcing. Transfer food into microwave-safe dish.May cause arcing. Transfer food into microwave-safe dish.May cause arcing and could cause a fire in the oven.7
A) Control panelB) Observation windowSETTING UP YOUR OVENNames of Oven Parts and AccessoriesRemove the oven and all materials from the carton and oven cavity.Your oven comes with the following accessories:Instruction Manual 1ANote: 1) Don't press the ceramic board forcibly. 2) Take and put the gently during the operation. 3) After using, don't touch the ceramic board by hand in order to avoid high temperature utensils in order to avoid damage the ceramic board.scald toBCDEC) Safety interlock system D) Ceramic boardE) Filter8
Installation side must be open.Remove all packing material and accessories.Examine the oven for any damage such asdents or broken door. Do not install if oven isdamaged.Countertop InstallationCabinet: Remove any protective film foundon the microwave oven cabinet surface.1. Select a level surface that provide enough open space for the intake and/or outlet vents .A 10-cm spacing should be kept betweenthe appliance and right and back walls,and a 30-cm spacing kept on the top.Never dismantlethe applicance's feet ,nor block the air intake and exhaust opening. can damage the oven.) Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception. outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label.1) Blocking the intake and/or outlet openings23 Plug your oven into a standard household)Fig 1( )Fig 1ure 30cmOPENeftThe l12 inch( )4.0 inch(10cm) 4.0 inch(10cm)4）Warning: T he plug socket,electric appliances or the appliance which are liable effected by heat and moisture should be kept away from any vents on the oven.2. Stacking and installation of the microwave oven. The maximum height of stacking shall be two layers. Specific stacking installation is as follows (A) Unscrew and remove the mounting plate, and then tighten the screws. (B) Remove the four screws as shown in Figure. (C) Mount the mounting plate to the lower position and fix the screws that are just loosened. 9
Cleaning InstructionsAlways keep the oven clean1. Cleaning the glass viewing window, the inner door panel and oven front face. For best performance and to maintain the high degree of safety, the inner door panel and oven front face should be free of food or grease build-up. Wipe these parts with a mild detergent, rinse and wipe dry. Never use abrasive powders or pads.2. Cleaning the control panel and plastic parts.Do not apply a detergent or an alkaline liquid spray to the control panel and plastic parts,as this may cause damage to these parts.Use a dry cloth (not a soaked cloth) to clean these parts.3. Cleaning the oven interiorAfter use be sure to clean up spilled liquids, spattered oil and food debris as quickly aspossible. If the oven is used when dirty, efficiency drops and the dirt gets stuck on the ovensurface and may cause bad odours. Clean the interior with a cloth soaked in luke-warmwater with a mild detergent dissolved in it, then rinse the soap off with a damp cloth.CAUTION: Do Not wipe plastic and painted sections of the oven with bleach, thinners orother cleaning agents, as this may cause these parts to dissolve or change sharp.4. Cleaning the oil blockage regularly, keep the oil blockage clear .Otherwise,the stain will drop on the food.on the oil blockage 5. Cleaning the filter regularly, keep it clear .The appliance will over heat when the filter is blocked.6.When the appliance is operated,oil blockage and filter location must correct vioding to damage other parts . ,a( )the installation in page 1 and 9 2010
Control Panel(with braille) and FeaturesOPERATION(2) USB Buttons(4) Time Entry Button(8) Stop/Reset Button(9) Start Button(5) Double Quantity Button(7) Number Buttons(7)(1) Defrost Button (3) Power Level Button(6) Triple Quantity Button(8) (9)(2) (3) (4) (5)(1) (6)11
OPERATION INSTRUCTIONOption Setting Discription1EOC Tone2BeeperVolume3BeeperOn/Off5On the Fly6 Door Reset8 ManualProgramming9Double DigitOP:10OP:11OP:12OP:20OP:21OP:22OP:23OP:30OP:31OP:40OP:41OP:42OP:43OP:50OP:51OP:60OP:61OP:70OP:71OP:80OP:81OP:90OP:914KeyboardWindow7 Max time3 seconds beepContinuous beep5 quick beeps,RepeatingBeeper OffLowMediumHighKeybeep OffKeybeep On15 seconds30 seconds60 seconds120 secondsOn-the-Fly DisabledOn-the-Fly EnabledDoor reset DisabledDoor Reset Enabled60 Minute Maximum Cook T ime10 Minute Maximum Cook TimeManual Programming DisabledManual Programming EnabledSingle Digit Mode-10 programsDoule Digit Mode-100 programsItems bolded below are the default values.Appendix. A User OptionsOP:00OP:01OP:02OP:03Off-Never Display Clean filterWeekly-Display every 7 daysMonthly-Display every 30 daysQuarterly-Display every 90 days0Clean filter12
The oven shall ship with the following Preset Cook Times unless otherwise noted in theproduct Specification.Button Display (Time) Power12345678900:100:200:300:451:001:302:00: 0100%100%100%100%100%100%100%100%100%100%Cook Factors80%80%80%80%80%80%80%80%80%80%Appendix. B Default Cook T imes2:303:003 313
pressed, the oven will change to idle mode. Note: Under idle mode, any button press will no response.1) Entry.The oven shall enter idle mode after a set of seconds have expired in Ready Mode without a keyboard press or a door open and close. The number of seconds is determined by the keyboard Timeout Window, set by User Option 4.2) During idle mode, is blank.And there shall be no oven activity.3) Opening and then closing the oven door, the oven will exit the idle mode and into ready mode.1) In this mode, the oven is ready to either begin a manual or preset cook cycle.2) Opening and closing the door while the oven is in Idle Mode will put the oven into Ready Mode.2) During Ready Mode, "READY" displays.3) From the Ready Mode, the oven can go to almost all of the other modes.1) While the door of the oven is open, the oven shall be in Door Open Mode. 3) When the door is closed, the oven shall be enter Ready Mode. running a manual or preset cook cycle, the oven shall enter Pause Mode. In all other cases, the oven shall return to Mode with User Option OP:61 set,opening and closing the door will clear out any information about a Manual or Preset Program which was running.2. Idle Mode3. Ready Mode4. Door Open Mode1. Power Up_ _ _ _ _ _ _the screen Door open When the oven is electrified for the first time, the voltage will display for 3 times and then " " will display. If " " button Note: Under idle mode, any button press will no response.If " " button pressed,the buzzer will ring once .And there shall be no oven activity.2) During this mode, is blank. the screen If the door is open during cooking state,"DOOR" and "OPEN" will diplay in order for once.Then the screen will display theremaining cooking time. And the fan and oven lamp work.f User Option OP:60 is selected and the oven wasNote:When the door is open, i14
1) This mode allow the users to temporarily stop the cooking cycle to inspect or stir the food item.2) While in Manual Cook Mode or Preset Program Cook Mode, if the door is open and then closed, or if the " " pad is pressed, the oven will enter Pause Mode.3) While paused, will display the remaining cooking time.4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode, dependent on User Option 4. Additionally,if the " " button is pressed, the oven shall immediately enter Ready Mode.OR if press " " button, the oven will go into working mode.3) During this mode, "00:00" displays If no power chosen, 100% power is default.5) During setting process, press " " to enter Manual Cook Mode. Press " " to 1) This mode allows cooking of the food items.While in Manual Cook Entry Mode, pressing the " " pad will cause to the oven to begin Manual Cook Mode.2) During this mode, remaning cooking time displays. The fan and oven lamp will light.3) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode.1) The user may manuallly enter a cook time and power level while in this mode.2) While the oven is in the Ready Mode,pressing the "Time Entry" pad on the keyboard will put the oven into Manual Cook Entry Mode.5. Pause Mode6. Manual Cook Entry Mode7. Manual Cook Mode,input the time you need.the screen 4) Press "Power Level" button, "%POWER" displays. Press number buttons to select power level you want, and the corresponding power will light. full power level, press "1" and "0" successively.Then the screen will display"%POWER" If you want to choose.enter Ready Mode.15
1) After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode, the oven shall go into The End of Cook Cycle Mode.2) During this mode, "DONE" displays.3) If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until the user acknowledges this by either opening and closing the door or pressing the " " pad. If User Option OP:10 is selected, after the 3 second beep, the oven shall display "DONE". After the beep, "READY" will display and the oven will enter Idle Mode without 1) This mode allows cooking of food items through a one pad touch operation. While in Ready Mode,pressing Preset Program associated with that number button.2) During this mode, displays the remaining cooking time. If it is multi-stage cooking, the total remaning cooking time displays not a particular stage cooking time.) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode. buttons, the preset cooking program will start automatically.8. End of Cook Cycle Mode9. Preset Program Cook Mode10. On the Fly Cooking3the screen1) While the oven is cooking, if User Option OP:51 is selected,press number2) The screen displays the remaining cooking time.3) When cooking program finish, the oven will enter End of Cook Cycle Mode. any operation for a period of time.number buttons will cause the oven to run the 16
(1) In Ready Mode, Press " " button, screen will display "00.00".(2) Press number buttons to input defrosting time. The maximum time is 99 minutes and (4) Press " DEFROST " to start defrosting. 99 seconds.displayed.The remained cooking time will be The default power is power level 20%. (4) When cooking program finish, the oven will enter End of Cook Cycle Mode. If you press " " button under this mode,the oven will enter Pause Mode.12. Programming ModeThis mode allows the user to assign cook times and power levels to the once touche button.1) Open the door and press "1" pad for 5 seconds,the buzzer will sound once and enter to Programming Mode.2) "PROGRAM" displays. 80%. "CF: " displays. If you need to change the cooking , just press one the number buttons to set. When the program saved, "PROGRAM" display " " to save the program, the buzzer will sound three times briefly tell you the time is no use. And then turn back to display "PROGRAM". The time set before will be no change.5) After setting the time and power, press " ", the cooking program will be saved.6) If all the cooking time exceeds the MAX.time User Option 7, when press to) To change the cooking fators: If press "X2", will display "CF:XX". The default factor isthe screenthe screenNote: et the timeS first,then choose the power.408 factors.of display the time associate with that number button. 3) Setting Program: Press number button to set the program. 2 seconds later, the screen will 4) Input the time: Press number buttons to input time. If no power chosen, 100% power is default. 5) Press "POWER LEVEL" button, "%POWER" displays. Press number buttons to select power level you want, and the corresponding power will light. full power level, press "1" and "0" successively.Then the screen will displayIf you want to."%POWER" choose 11. Time Defrost Function17
) Close the door, the oven will turn back to Ready Mode. If press " " button during setting process, the oven turn to Door Open Mode. The program that not saved will be lost. If there is program saved as memory procedure, press the related number button, the saved program will start. If no saved program, the buzzer will alarm when pressing number button and it will not work.For example: set the program as memory cooking. Power level 70% and cooking time is 1 minute and 25 seconds.Step1: Open the door, press number button "1" for 5 seconds,"PROGRAM" displays.Step 2: Press number button "3", the screen will display "P:03",After two seconds,Step 3: Press number buttons "1", "2" and "5" to input the cooking time.Step 4: Press "7 " button," " displays. Setting finished.Step : Press " " to save. When use the program next time, just press "3", the related program will start.Note:1. If the electricity is cut off, the saved program will not lost.2. If the program need to reset , just repeat the aboved steps.3. If press " " at the last step, it will turn back to Ready Mode. The setting will be no use.751:25 70the screen will display the time " :30".related2) If the "X2" in Ready Mode, followed by the starting of a Preset or if the "X2" button is pressed in 5 secondes of starting a Preset start cooking with the quantity preset cooking time.3) Press "X2", "DOUBLE" displays. When press number quantity preset time. For example, number button "5" and its preset time is 1 minute. Then press "X2", then time will change to 1:00*2=2 (2 minutes)4) When cooking program finish, the oven will enter End of Cook Cycle Mode.1or "X3" button is pressed Program, or " "X3Program, the oven willPress " "X3 , " "TRIPLE displays. buttons, the screen will display the 3. Double/ Triple Quantity cooking18
14. Stage Cooking Programming This allows the user to cook food items at 1) Three stages can be set at most under cooking mode or programming mode. Aftet setting the power and time for the first stage, press " Time Entry " to set the second stage. And the same step to set the third stage.2) When setting the second, third stage, press " Time Entry", "STAGE 2","STAGE 3" displays.3) Press " " button to start cooking.Example: In programming mode, set t stages cooking.The first stage is PL7 and time is 1 minute 25 seconds. The second stage is PL5 and 5 minutes and 40 seconds. The steps are follow.70" displays. The first stage is finished.Press " Time Entry", "STAGE 2" displays.Medium 50% ", " " displays. The second stage is finished. Press " " button to start cooking. wo50manual cook mode and program ing m de.m .The total time cout s down.1:25 5:40 o- -press number buttons " "3 to -ress number button "1" for 5 seconds,"PROGRAM" displays.the screen will display the time " :30".related,pa.b. Press number button "3", the screen will display "P:03",After two seconds,c.Press "1","2","5" to input the cooking time. "1:25" displays.d. Press "Med-Hi 70% ", "e. f. Press "5", "4","0" button, "5:40" displays.g.Press "h.i Open the doorn(1) If User Option OP:51 is selected and the setting time arrives, the oven will remind theuser to cleaning the filter.Note: The oven must be electrified.(2) The screen will display "CLEAN FILTER". At this time, pressing " " button or openingthe door will put the oven into Ready Mode.(2) If you do not need to clean the filter , press " " button and hold for 3 seconds to clearout the reminder information. Otherwise, the oven will remind all the time you during Idle. Mode15. Filter Cleaning Function19
(1) (2) Press "USB" button to update the data of computer board. "LOADING" (3) If the update is successful, the screen will display "SUCCESS". Otherwise, "Fail" will (4) Press " " or open the door to finish it.During Ready Mode, insert the U disk which saved the "Utable" file. displays.display.17. Use Option Mode This allows the user choose between various ways for the oven to operate.1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter this mode.2) displays "OP: - -".3) Press any number button to enter related mode setting. For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays. If you want to change, keep pressing "2", displays "OP:20", "OP:21","OP:22", "OP:23", "OP:20" .....in cycle.4) Press " " to save the current setting. After saved, "OP: - -" display again.5) During setting process, press " " to enter Door Open Mode. Close the door will enter Ready Mode.6) If " " button not pressed at the last step, the program cannot be saved but stay at previous way.the screenThe screen16. USB Function18. Factory-default setting1) Press " " and " 0 ", the buzzer sounds once,and the screen wil l display "CHECK".actory-default setting, will display " 11 ",after three seconds, turn ode In the Ready Mode,pressing " " an " 0 " to factory-default setting. d the oven Press" " to cancel the display ang back to ready back in the he factory-default setting, will display " 00 ", press" " will display " CLEAR ". 2) If do not press " " when the display " 00 ",the setting will cancel.the screenthe screenscreenNote: actort-default setting operation restore all configure to f . Be careful in the as it willthe buzzer sounds once,isplay " "11 or " "00 . d setting, the screento the ready mIf not in tin the fIf i t is process of display. to the factory-defaultafter self-testing, the screen will 20
The front filter serves as the air inlet; the filter on time to keep the chamber clean. 1. Turn counterclockwise to unscrew and take down it with warm soap water; 2. Install the filter screen Tighten clockwise the screws to fix the filter ; 3. Make sure the filter is installed before use of the microwave oven; 4. The factory setting has the function to remind the user of washing the filter (6) Splash shield cleaning 1. Detaching: Hold the two buckle positions in front of hands (as shown by the arrows). Exert your strength following the direction of the arrows and pull downwards after you have pulled out the buckles: 2. Wash the splash shield: 3. Installation: Pick up the splash shield and obliquely put it into the chamber in pin at the rear into the positioning hole on the rear plate of chamber, then push the other side to insert all positioning pins into their Caution! Make sure the splash shield is installed correctly before use of the microwave oven! Filter Filter screws Filter cleaningshould be cleanedthe filter ; and washthe splash shield with yourthe way that insert the first positioning holes. every 30 days. 21
Installation(supplement)1. The switching operation of this microwave oven can cause voltage fluctuations on the supply line. The operation of this oven under unfavorable voltage supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system impedance Zmax of 0.2 Ohms at the interface point of the user’s supply. The user has to ensure that this device is connected only to a power supply system which fulfills the requirement above. If necessary, the user can ask the public power supply company for the system impedance at the interface point. 2. If there is no equipotential bonding conductor in the electric supply, an external equipotential bonding conductor must be installed at the rear of the appliance (see symbol). This terminal shall be in effective electrical contact with all fixed exposed metal parts and shall allow the connection of a conductor having a nominal cross-sectional area up to 10 mm². Symbol for the external connection of equipotential bonding conductors. Symbol for the external connection of equipotential bonding conductors.22
TroubleshootingCheck your problem by using the chart below and try the solutions for each problem. If themicrowave oven still does not work properly, contact the nearest authorized service center.TROUBLEOven will not startPOSSIBLE CAUSE POSSIBLE REMEDYa. Electrical cord for oven is not plugged in.b. Door is open.c. Wrong operation is set.a. Plug into the outlet.b. Close the door and try again.c. Check instructions.Arcing or sparkinga. Materials to be avoided in microwave oven were used.b. The oven is operated when empty.c. Spilled food remains in the cavity.a. Use microwave-safe cookware only.b. Do not operate with oven empty.c. Clean cavity with wet towel.Unevenly cooked foodsa. Materials to be avoided in microwave oven were used.b. Food is not defrosted completely.c. Cooking time, power level is not suitble.d. Food is not turned or stirred.a. Use microwave-safe cookware only.b. Completely defrost food.c. Use correct cooking time, power level.d. Turn or stir food.Overcooked foods Cooking time, power level isnot suitable.Use correct cooking time,power level.Undercooked foodsa. Materials to be avoided in microwave oven were used.b. Food is not defrosted completely.c. Oven ventilation ports are restricted.d. Cooking time, power level is not suitable.a. Use microwave-safe cookware only.b. Completely defrost food.c. Check to see that oven venti- lation ports are not restricted.d. Use correct cooking time, power level.Improper defrostinga. Materials to be avoided in microwave oven were used.b. Cooking time, power level is not suitable.c. Food is not turned or stirred.a. Use microwave-safe cookware only.b. Use correct cooking time, power level.c. Turn or stir food.MAINTENANCE23

Navigation menu