Midea Smart Technology 0002 WIFI module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3174627
Application ID	i2chzn3rPEE8YcxpsW+mvw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.27kB (315863 bits)
Date Submitted	2016-10-26 00:00:00
Date Available	2016-10-26 00:00:00
Creation Date	2016-10-24 14:13:41
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2016-10-24 14:14:22
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 9.1 Word 版
Document Author:	Huanghai

MM591050-10
Wi-Fi Module
Datasheet
Revision
Date
Description
1.0
2016-09-27
initial release
Author
1.
2.
3.
Introduction ......................................................................................... 错误！未定义书签。
1.1Module System Block Diagram ................................................. 错误！未定义书签。
1.2
Module technical specifications ....................................... 错误！未定义书签。
Structure specification ...................................................................... 错误！未定义书签。
2.1 Module structure size .................................................................................................... 5
2.2 Hardware interface definition.................................................................................... 6
Wireless Specification ....................................................................... 错误！未定义书签。
3.1 802.11b mode................................................................................................................. 6
3.2 802.11g mode................................................................................................................. 7
3.3 802.11n HT20mode ........................................................................................................ 8
3.4 802.11n HT40mode ........................................................................................................ 9
1. Introduction
MM591050-10 Wireless WIFI module is a low-power WIFI module for
the Internet of Things. It supports IEEE802.11b / g / n protocol. It also
embeds IPV4 / IPV6 TCP / IP, HTTP, DNS, FTP and other complete network
protocols, making the terminal more reliable, convenient and easy to
use.
The MM591050-10
module contains a Midea MS51001 single-chip
solution. the chip in software and hardware are used in low-power
technology, the purpose is to lower the power consumption of the
entire board, the product more competitive.At present, the module
provides a complete serial interface functions and equipment to
communicate, so you can through the serial port and mobile client to
connect the cloud and equipment.

IEEE 802.1b/g/n, 2.4Ghz ,1T1R

internal antennas

Green TX Low power saving technology

Low power monitor mode

Support 150Mbps

Support PWM

Full encryption support：WPS, WPA, WPA2, WAPI, WEP, TKIP

Support IPV4/IPV6, TCP/IPprotocol

Support HTTP, DNS, FTP and other network protocols

Support AES 128/256, DES/3DES, SHA1, SHA224 and other hardware
encryption
1.1 Module System Block Diagram
As shown in Figure 1, MM591050-10 using the Midea MS51001
single-chip 1T1R program, the chip highly integrated CPU, PMU, RAM,
Transceiver, LNA, PA, memmory, XTAL and other major parts, thus
greatly reducing the machine power, Amplitude reduces the layout
area. The module uses the internal antenna design in PCB, both for
customers to reduce the cost of the antenna, but also eliminates the
need to consider the antenna assembly space.
figure 1. Module System Block Diagram
1.2 Module technical specifications
Main chip
Midea MS51001
Workingfrequency
2.412GHz~2.462GHz
SupportedWIFI
standard
802.11b/g/n(1x1)
Modulation
11b: DBPSK, DQPSK, CCK, DSSS
11g: BPSK, QPSK, 16QAM, OFDM
11n: MCS0~MSC7 OFDM
Supported rates
11b: 1, 2, 5.5 和 11Mbps
11g: 6,9,12,18,24,36,48,54Mbps
11n: MCS0~7, up to 150Mbps
communication
interface
UART
PCB layer structure
2 Layer
PCB size
18mm(L)x13mm(W)x1.0mm(H)
Antenna
PCB internal antennas
Working
temperature
-20℃~+85℃
Storage
temperature
-40℃~+125℃
Hardware
number
version
RTK_UART_V1.0
2 Structure specification
2.1 Module structure size
The size of the module as shown above, length 18mm, width 13mm, thickness
1.0mm (error +/- 0.1mm)
2.2 Hardware interface definition
PIN
Signal Name
Description
VCC(V)
Supply Input Pin
RXD(R)
UART receive data
TXD(T)
UART transmit data
VSS(GND)
Ground
3 Wireless Specification
3.1 802.11b mode
Item
Content
Standard
IEEE802.11b
Mode
DSSS/CCK
Channel
CH1-CH11
Data Rate
1,2,5.5,11Mbps
DC Characteristics
DC Current(Average)@3.3V input
Min.
Typ.
Max.
Unit
Remark
1) TX only @17dBm
280
2) TX throughput mode
120
3) RX throughput mode
100
mA
Min.
Typ.
Max.
Unit
15
17
19
dBm
Fc +/-11MHz to +/-22MHz
-30
dBr
Fc> +/- 22MHz
-50
dBr
4.Frequency Error
-25
25
ppm
RX Characteristics
Min.
Typ.
Max.
Unit
TX Characteristics
mA
2. Power Level(Calibrated)
17dBm Target
3.Spectrum Mask @target Power
5.Minmum Input Level Sensitivity
1)
1Mbps(FER≤8%)
-80
dBm
2)
2Mbps(FER≤8%)
-80
dBm
3)
5.5Mbps(FER≤8%)
-79
dBm
4)
11Mbps(FER≤8%)
-82
-76
dBm
-10
dBm
6. Maximum Input Level(FER<=8%)
-20
3.2 802.11g mode
Item
Content
Standard
IEEE802.11g
Mode
OFDM
Channel
CH1-CH11
Data Rate
6,9,12,18,24,36,48,54Mbps
DC Characteristics
Min.
Typ.
Max.
Unit
1) TX only @16dBm
280
mA
2) TX throughput mode
120
mA
3) RX throughput mode
100
mA
Min.
Typ.
Max.
Unit
1) 17dBm Target @6Mbps
15
17
19
dBm
2) 14dBm Target @54Mbps
12
14
16
dBm
at fc +/-11MHz to +/-20MHz
-20
dBr
at fc +/- 20MHz
-28
dBr
-40
dBr
1)6Mbps
-5
dB
2)9Mbps
-8
dB
DC Current(Average)@3.3V input
TX Characteristics
2. Power Level(Calibrated)
3.Spectrum Mask @target Power
at fc> +/-30MHz
4.Constellation
Error(EVM)@target
power
Remark
3)12Mbps
-10
dB
4)18Mbps
-13
dB
5)24Mbps
-16
dB
6)36Mbps
-19
dB
7)48Mbps
-22
dB
-28
-25
dB
-20
20
Ppm
Min.
Typ.
Max.
Unit
8)54Mbps
5. Frequency Error
RX Characteristics
6. Minimum Input Level Sensitivity
1)
6Mbps(PER≤10%)
-82
dBm
2)
9Mbps(PER≤10%)
-81
dBm
3)
12Mbps(PER≤10%)
-79
dBm
4)
18Mbps(PER≤10%)
-77
dBm
5)
24Mbps(PER≤10%
-74
dBm
6)
36Mbps(PER≤10%)
-70
dBm
7)
48Mbps(PER≤10%)
-66
dBm
8)
54Mbps(PER≤10%)
-71
-65
dBm
-10
dBm
7. Maximum Input Level (PER<=10%)
-20
3.3 802.11n HT20mode
Item
Content
Standard
IEEE802.11n HT20 @2.4Ghz
Mode
OFDM
Channel
CH1-CH11
Data Rate(MCS Index)
MCS0/1/2/3/4/5/6/7
DC Characteristics
Min.
Typ.
Max.
Unit
280
mA
2) TX throughput mode
120
mA
3) RX throughput mode
100
mA
DC Current(Average)@5V input
1) TX only @17dBm Target(each port),
(continue Tx MIMO MCS7)
TX Characteristics
Min.
Typ.
Max.
Unit
1)17dBm Target@MCS0
15
17
19
dBm
2)13dBm Target@MCS7
11
13
15
dBm
at fc +/-11MHz
-20
dBr
at fc +/- 20MHz
-28
dBr
-45
dBr
-5
dB
2. Power Level
3.Spectrum Mask @target Power
at fc> +/-30MHz
4.Constellation Error(EVM)@target power
1)MCS0
Remark
2)MCS1
-10
dB
3)MCS2
-13
dB
4)MCS3
-16
dB
5)MCS4
-19
dB
6) MCS5
-22
dB
7) MCS6
-25
dB
-30
-27
dB
-20
20
Ppm
Min.
Typ.
Max.
Unit
8) MCS7
5. Frequency Error
RX Characteristics
6. Minimum Input Level Sensitivity
1)
MCS0(PER≤10%)
-82
dBm
2)
MCS1(PER≤10%)
-79
dBm
3)
MCS2(PER≤10%)
-77
dBm
4)
MCS3(PER≤10%)
-74
dBm
5)
MCS4(PER≤10%
-70
dBm
6)
MCS5Mbps(PER≤10%)
-66
dBm
7)
MCS6Mbps(PER≤10%)
-65
dBm
8)
MCS7Mbps(PER≤10%)
-70
-64
dBm
-10
dBm
7. Maximum Input Level (PER<=10%)
-20
3.4 802.11n HT40mode
Item
Content
Standard
IEEE802.11n HT40 @2.4Ghz
Mode
OFDM
Channel
CH3-CH9
Data Rate(MCS Index)
MCS0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15
DC Characteristics
Min.
Typ.
Max.
Unit
DC Current(Average)@5V input
1) TX only @16dBm Target
240
mA
2) TX throughput mode
120
mA
3) RX throughput mode
100
mA
TX Characteristics
Min.
Typ.
Max.
Unit
1)14dBm Target
14
16
18
dBm
2)12dBm Target
10
12
14
dBm
at fc +/-21MHz
-20
dBr
at fc+/- 40MHz
-28
dBr
-45
dBr
-5
dB
2. Power Level
3.Spectrum Mask @target Power
at fc> +/-60MHz
4.Constellation Error(EVM)@target power
1)MCS0
Remark
2)MCS1
-10
dB
3)MCS2
-13
dB
4)MCS3
-16
dB
5)MCS4
-19
dB
6) MCS5
-22
dB
7) MCS6
-25
dB
-30
-27
dB
-20
20
Ppm
Min.
Typ.
Max.
Unit
8) MCS7
5. Frequency Error
RX Characteristics
6. Minimum Input Level Sensitivity
1)
MCS0(PER≤10%)
-79
dBm
2)
MCS1(PER≤10%)
-76
dBm
3)
MCS2(PER≤10%)
-74
dBm
4)
MCS3(PER≤10%)
-71
dBm
5)
MCS4(PER≤10%
-67
dBm
6)
MCS5Mbps(PER≤10%)
-63
dBm
7)
MCS6Mbps(PER≤10%)
-62
dBm
8)
MCS7Mbps(PER≤10%)
-66
-61
dBm
-10
dBm
7. Maximum Input Level (PER<=10%)
-20
Federal Communication Commission Interference Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residentialinstallation. This equipment generates
uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any otherantenna or
transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for anuncontrolled
environment. This equipment should be installed and operated withminimum distance 20cm
between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antennaand
users, and 2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for anyadditional
compliance requirements required with this module installed
IMPORTANT NOTE:In the event that these conditions can not be met (for examplecertain
laptop configurations or co-location with another transmitter), then the FCCauthorization is no
longer considered valid and the FCC ID can not be used on thefinal product. In these
circumstances, the OEM integrator will be responsible for reevaluating the end
product(including the transmitter) and obtaining a separate FCCauthorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may beinstalled
such that 20 cm may be maintained between the antenna and users. Thefinal endproduct must
be labeled in a visible area with the following: “Contains FCCID: 2AIRV0002”. The grantee's
FCC ID can be used only when all FCCcompliance requirements aremet.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end userregarding how
to install or remove this RF module in the user’s manual of the endproduct which integrates
this module.
The end user manual shall include all required regulatory information/warning as show in this
manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Huanghai
Create Date                     : 2016:10:24 14:13:41+08:00
Modify Date                     : 2016:10:24 14:14:22+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:10:24 14:14:22+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Document ID                     : uuid:6469b98e-89aa-4251-96e1-a82d91db2f35
Instance ID                     : uuid:45fe3994-89c6-45b9-87fb-531ac069a220
Subject                         : 14
Format                          : application/pdf
Creator                         : Huanghai
Producer                        : Adobe PDF Library 9.0
Source Modified                 : D:20161024061322
Company                         : P R C
KSO Product Build Ver           : 2052-10.1.0.5975
Page Layout                     : OneColumn
Page Count                      : 11

EXIF Metadata provided by EXIF.tools