Midland Radio 700511C Non-Broadcast Transmitter User Manual User Instructions

Download:
Mirror Download [FCC.gov]
Document ID	67530
Application ID	I+jw9kEj4vbES28Iop8dEg==
Document Description	User Instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	251.69kB (3146093 bits)
Date Submitted	1999-10-29 00:00:00
Date Available	2000-02-04 00:00:00
Creation Date	2001-05-21 10:01:52
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-21 10:01:53
Document Title	User Instructions

“lDLANDMngA
Titan”
MULTI-MDDE TWO-WAY
FM MOBILE RADIOS
DPEFIATDR'S MANUAL
STANDARD CDMHDLS
AND INDICATORS
POWERNOLUME KNOB
Press and hold for a few seconds tor power on. Press and hold again
for power off. Clockwise rotation increases volume of received
messages.
CHANNEL/MENU CONTROL KNOB
Channel Function: Rotate to scroll through channels. Your radio can
be programmed to either stop at the highest and lowest channels, or
for channel rollover.
Menu Function: Press and hold for 1 second to activate the menu
mode. which will allow you to access Channel Display. Squelch
Setting (SQL), Group Setting (GHP), Scan Key Type Setting (PHI,
SCN, P/S). Back Light Control (BLN: on, or BLF=ofl). ANI (ANN=cn,
ANF=oif). Clone Mode (CLN) and Clone Process,
PUSH-TO-TALK BAR (On the Hand Microphone)
Transmit mode (talk mode) is initiated when pressed, The radio will
emit your voice signals on the channel that appears in the Channel
Display.
SCAN BUTTON
Press SCAN to activate Scan operation. For detailed inlormalion see
the following descriptions of the different scan modes.
MONITOR BUTTON
Press and immediately release the MON button to disable the Coded
Squelch function for adiustment of squelch and volume and to check
for busy channel. Press and release again to re-enable the coded
squelch.
AID BUTTON
Pras AID to activate Add/Delae Mode. For detailed information see
the following description of scan operation
AUX BUTTON
Press AUX to access Auxiliary functions.
CHANNEL DISPLAY
Indicates selected channel number and is always illuminated when
radio is on. During scan operation. indicates selected channel or
received channel,
DISPATCH OPERATION '
SELECTING CHANNELS
If your radio is equipped with more than one channel, rotate the channel knot: to select
available channels. Consult your dispatcher for proper usage.
MESSAGE RECEIPT (RECEIVE)
If a signal exists on the displayed Channel, and you are within radio range of the sender,
you will hear it on the loudspeaker.
NOTE: Your radio may be equipped to block communications from radios not in your
radio system (coded squelch feature), or it may even block calls from your system that
are not directed to you (select call feature).
SENDING A MESSAGE (TRANSMIT)
1. Press MON to deactivate the Coded Squelch feature, it your transceiver is equipped
with the Midland Switched Hang-Up Box. simply lift the hand microphone from the
box, instead. It the selected channel does not use coded squelch, skip this step.
2. Listen to make sure the selected Channel is clear.
3. Hold the hand microphone close to your mouth, press the Push~To-Talk Bar (PTT)
on the hand microphone to initiate transmit, then announce your message. To hear
the replay. release PT‘I' when finished speaking.
4. When your conversation is complete, press MON again to engage the Code
Squelch feature, or return the hand microphone to the Switched Hang-Up Box.
QUICK GUIDE OF MQEILE SCAN MODES
The radio technician can initially program this radio for one of four different types of scan.
The user can select. through the MENU mode, three variations of the scan programmed
by the radio technician. The following table outlines line scan type variation that the user
can obtain depending upon the radio programming.
SCAN TVPE FROGRAHMED
NORMAL MODIFIED SECONDARY PS
USER SELECTION RESuLflNG scan TVPE
PFli iPfil] AscAN A SCAN s on MODE PS PSCAN
SCAN 15ch B SCAN B‘ SCAN e' SCAN
PHI SCAN (P/si GHPA ASCAN
NOTE: The “OFF HOOK SCAN STOP" enable/disable is programmed by the radio
technician prior to use of the radio.
TYPE “A” SCAN MODE
1. The radio will scan the “A" scan channels as programmed by the radio technlcian.
To start scan, press and release the scan button.
2, The transmit "PHI 1" priority channel will be the channel that was set when starting
the scan operation.
3. Priority monitor enable/disabie is programmed by the radio technician.
4. In the scan mode, the transmit channel will be the priority channel.
5. To delete a nuisance channel from the scan list: When the scan stops on the
nuisance channel, press and release the AID button.
6. To stop scan, press and release the scan button. To restart scan when the radio is
stopped on a busy channel. rotate the channel knob up one channeL
7, If the “OFF HOOK SCAN STOP" is enabled and the microphone is off hook the "PF“
2" channel add/delete is available. To add or delete the “PHI 2" channel, press and
hold the SCAN button more than 1 second.
8. if scan is stopped. Add/Delete of Group A channels is available in Add/Delete mode,
TYPE “B" SCAN MODE
1. The radio will scan the “B" scan channels as programmed by the radio technician.
2. Transmit will occur on the channel that was last stopped during scan (hold channel).
If there was no hold channel the radio will transmit on the “PHI 1“ channel.
3. To return to lhe hold channel during scant press and release the scan button,
4. PRI monitor function is not available in this mode. If scan is stopped. Add/Delete of
Group E channels is available in Add/Delete mode.
5. Other operation is the same as type “A" scan,
TYPE “B’ ” SCAN MODE
1. Operation is the same as type “B" scan. except the SCAN button operation is the
same as type “A” scan.
2. If scan is stopped, Add/Delete of Group B channels is available in Add/Delete mode.
TYPE “PS" SCAN MODE
1. The “A" channels will be scanned in this mode.
2. The transmit priority channel will be the channel that was set when scan was
activated.
3. "PRI" monitor is the same operation as type “A" scan.
4, To change the “PHI 1" channel. rotate the channel selector while in the scan mode or
during OFF HOOK SCAN stop.
5. Deleting a nuisance channel is the same as type “A" scan.
6. Adding or deleting the "PHI 2" channel is the same as type “A” scan.
7. If scan is stopped, Add/Delete ol Group A channels is available in Add/Delete mode.
TYPE "GRP A” MODE
Transmit will occur on the currently displayed channel,
To change the LAST HOLD CHANNEL rotate the channel selector during scan.
It is not possible to add or delete scan channels.
Channel returns to the LAST HOLD CHANNEL, v/nen scan is stopped by the
operator.
PPN?‘
5. Other operation is the same as type “A" scan.
TYPE “S OH" MODE
1. This mode allows setting of a secondary channel on which the radio erI transmit. To
set the secondary channel, rotate the channel selector during scan operation to the
desired channel.
2. if the radio is stopped scanning on the “PHI 1" or “PHI 2" then transmit will occur on
the corresponding “PRI' channel.
3. It is not possible to add or delete scan channels in this mode.
4. Other operation is the same as type “A" scan.
NOTE: It is a programmable function to enable/disable the initialization of the
Add/Delete scan table. It is possible to initialize the scan table by pressing the A/D
button for a few seconds while in the Add/Delete mode.
CAU'HDN
The Antenna Connector must be snugly tightened to maintain proper electrical
connection and moisture resistance.
GENERAL SAFETY INFORMATION
DO NOT operate a mobile radio transmitter when someone outside the vehicle is within
two feet (0.6 meter) of the antenna. .
DO NOT operate a transmitter oi any radio unless all RF connectors are secure and
properly terminated.
DO NOT operate this equipment near electrical blasting caps or in an explosive
atmosphere.
All equipment must be grounded according to Midland installation instruction for safe
operation.
All equipment should be serviced only by a qualified technician.
Refer to the unit service manual for additional safety information.
SERVICE MANUALS
Testing alignment and service information are provided in the service manual for this
model. Serwce manuals for Titanw radios are available from Midland at the address
shown on the back cover.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
|nterference.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:05:21 10:01:52
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:05:21 10:01:53-04:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools