Midland Radio GXT1050P HANDHELD FRS/GMRS TRANSCEIVER User Manual GXT900 Owner s Manual qxp
Midland Radio Corporation HANDHELD FRS/GMRS TRANSCEIVER GXT900 Owner s Manual qxp
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2608208 |
| Application ID | YLpV9yYa/rHMZeaNcv/dZQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 95.73kB (1196607 bits) |
| Date Submitted | 2015-05-08 00:00:00 |
| Date Available | 2015-05-08 00:00:00 |
| Creation Date | 2007-12-22 13:14:48 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2008-03-20 10:47:19 |
| Document Title | GXT900 Owner's Manual.qxp |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Presario |
Model GXT900/950 Series ® TABLE OF CONTENTS Introduction Important Notice, FCC Licensing LCD Display Controls Battery Installation Installing the Belt Clip Charging the Optional Battery Pack Low Battery Level Indicator Operating Your Radio External Speaker/Microphone Jack Troubleshooting Guide Use and Care Specifications and Frequency Charts Warranty Information MIDLAND Family Products Accessories Accessories Order Form 9 - 18 18 19 19 20 - 21 22 23 23 - 25 27 Page 3 www.midlandradio.com Model GXT900/950 Series ® Welcome to the world of Midland electronics Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents the state-of-the-art in high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big in performance. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. Features 42 GMRS/FRS Channel 142 Privacy Codes (38 CTCSS / 104 DCS) Water Resistant (IP4 Standard) Direct Call VOX Selectable Call Alert (additional Animal Sound on GXT850) NOAA Weather Radio NOAA Weather Alert VIBRATE ALERT Scrambler Function Monitor Function Roger Beep Tone Silent Operation Keypad Lock Power HI/MED/LO Settings Speaker / Microphone Jacks Battery Meter / Battery Low Indicator This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. (Tested with Headset Model: AVP-1) Page 4 www.midlandradio.com Model GXT900/950/850 Series ® IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION The GXT900/950 Series operates on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the GMRS channels of the GXT900/950 Series. Serious penalties could result for unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Act's Sections 501 and 502 (amended). You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of their transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www.fcc.gov and request form 605. Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human being to radio frequency electromagnetic energy: - United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J - American National Standards Institute (ANSI)/Institute of Electrical & Electronic Engineers (IEEE) C95. 1-1992 - Institute of Electrical and Electronic Engineer (IEEE) C95. 1-1999 Edition - National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 - International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. IMPORTANT: Changes or modifications to this unit not expressly approved by MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians. Page 5 www.midlandradio.com Model GXT900/950 Series ® LCD DISPLAY CONTROLS 14 19 20 15 21 16 17 18 Page 6 22 23 1. BATTERY METER – Indicates the battery level. 2. SCRAMBLER ICON – Indicates when the Scrambler feature is on. 3. KEY LOCK ICON – Indicates KEY LOCK mode is on. 4. VOX ICON – Indicates when VOX mode is active. 10 5. NOAA WEATHER (WX) BAND ICON– Indicates when the radio is in Weather Band mode. 11 6. CHANNEL NUMBER – Changes from 12 1~22 on GMRS/FRS band (1~10 on WX band). 13 7. PRIVACY CODE – Indicates Privacy Code selected by user (oF~38/oF~104). 8. GROUP MODE ICON – Indicates when the Group Mode is on. 9. VIBRATE-ALERT ICON – Indicates when the Vibrate-Alert feature is on. 10. RECEIVE (RX) ICON – Indicates radio is receiving a transmission. 11. TRANSMIT (TX) ICON – Indicates radio is transmitting a signal. 12. TRANSMIT POWER LEVEL ICON – Indicates TX Power setting (H/M/L) 13. PRIVACY CODE ICON – Indicates Privacy Code setting (CTCSS/DCS). 14. POWER/VOLUME KNOB – Turn clockwise to turn the power on and increase the volume level. Turn counter-clockwise to decrease the volume level and turn the power off. 15. PTT Button – Press and hold to transmit voice communication. 16. CALL/LOCK Button – Press to send a CALL Alert signal. Press and hold to turn KEY LOCK on/off. 17. UP and DOWN Button – Make adjustments in MENU mode.. 18. SPEAKER – Built-in speaker. 19. ANTENNA. 20. EXTERNAL SPEAKER/MIC JACK. 21. MENU Button – Press to access Menu mode. Press and hold for 5 seconds to activate the NOAA Weather Scan function. 22. MONITOR/SCAN Button – Press to enter SCAN mode. Press and hold to enter MONITOR mode 23. MIC – Built-in microphone. www.midlandradio.com Model GXT900/950 Series ® BATTERY INSTALLATION Your GXT900/950 Series radio operates with either 4 AA alkaline batteries or an optional NiMH battery pack. The belt clip should be removed (see below) to ease installation or removal of the batteries. To install the batteries: 1. With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pulling down the Battery Cover Latch and lifting up the Battery Cover from the radio. 2. Insert 4 AA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the radio from operating or may damage the radio. 3. Return the Battery Cover by sliding it up on the radio and push up the Battery Cover Latch until it locks into place. Replace the belt clip, making sure it locks into place. BATTERY COVER One Battery inserted in this slot BATTERY COMPARTMENT BATTERY COVER LATCH BELT CLIP LOCK TAB INSTALLING THE BELT CLIP To install the BELT CLIP, slide the clip down into the slot on the back of the radio until the BELT CLIP LATCH clicks. To remove the BELT CLIP, press the LOCK TAB down , then gently pull the belt clip up toward the top of the radio. BELT CLIP LATCH Page 7 www.midlandradio.com Model GXT900/950 Series ® CHARGING THE OPTIONAL BATTERY PACK Your GXT900/950 Series is equipped for using an optional rechargeable NiMH battery pack (included) which can be recharged using a desktop charger (included). Initial charge time is 24 hours with a charge time of 12 hours thereafter. For maximum battery life, we recommend charging the battery pack when the low battery icon comes on. Remove the radios from the charger when the charge time expires. To charge using a Desktop Charger: 1. Place the rechargeable battery packs in the radios. 2. Connect the AC adapter into an AC wall outlet. 3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if charging in vehicle) into the desktop charger jack. 4. Place the units into the desktop charger slot and note that the LED indicator with RED color will light up, indicating charging function. In order to ensure that the battery pack is fully charged, it is recommended that the battery pack be charged for at least 12 hours with the radio turned OFF. 1. Only use our NiMH battery pack. 2. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio. 3. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio. BATTERY LEVEL INDICATOR Your GXT900/950 Series has a BATTERY LEVEL METER that shows the battery power level. The greater the number of bars visible, the stronger the battery level. When the battery level is low, the Battery Shell icon and “Lo bt” will flash in the display indicating your batteries should be replaced or recharged if using a rechargeable battery pack. Page 8 www.midlandradio.com Model GXT900/950 Series ® OPERATING YOUR RADIO POWER ON/OFF AND VOLUME Rotate the POWER/VOLUME knob clockwise to turn the radio on and increase the volume level. Rotate the control counter-clockwise to reduce the volume level and to turn the radio off. During Power On, the radio will beep 2 times with different tones, the LCD will display all icons for 1 second and the LCD display will indicate the last channel selected. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the same channel and Privacy Code. 1. For maximum clarity, hold the radio 2 to 3 inches from your mouth. 2. Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display while transmitting. 3. To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission. ABOUT RANGE Your GXT Series radios are designed to give you maximum range under optimum conditions. Optimum Conditions are: l Over water l Open rural areas without obstructions l Flat areas where you can see the other person To ensure you get maximum range: l Be sure to use fresh or fully charged batteries - low batteries will cause low power conditions l Be sure you are on a GMRS channel - FRS channels are restricted by the FCC to low power l Be sure to set your radio to use Hi power. Page 9 www.midlandradio.com Model GXT900/950 Series ® GXT900/950 SERIES QUICK REFERENCE CHART MENU Channel Group Mode 1~42 Off MENU On Group Code ID Setting 0~142 1~10 Caller ID 4 digit code (0~9), Press MON to choose each digit Ring Tone 0~5 Privacy Scrambler Power eVOX Silent Operation Roger Beep Call Tone Vibrate Off On/Off H/M/L oF~9 On/Off On/Off 1~10 On/Off Press and hold the MENU button for 5 seconds WX Channel WX Alert 1~15 for GXT950 1~10 CTCSS 1~38 DCS 1~104 On/Off MONITOR Pressing and holding the MONITOR button for 1 second will let you hear noise so you can adjust the volume level of the radio when not receiving a signal. This should be used to check activity on your current channel before transmitting. Press and hold the MONITOR button for 1 second again to get out of MONITOR mode. SCAN Your GXT900/950 Series can scan all 42 channels for activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 42 channels and stop on any active channel. Your radio will resume scanning after 4 seconds when the channel is no longer active. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel for 10 seconds before resuming scan when PTT button is no longer pressed. To resume scanning, quickly press the / button. CALL ALERT Your GXT900/950 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation. The GXT900 has 10 call alert selections while the GXT950 has 15 call alerts including 5 “animal sound” call alerts - Turkey, Duck, Crow, Cougar, Wolf. Page 10 www.midlandradio.com Model GXT900/950 Series ® KEYPAD LOCK To avoid accidentally changing the radio setting, press the LOCK button for 2 seconds. The KEY LOCK icon will appear on the display. PTT and CALL will still be active. Repeat the same procedure to unlock the keypad. DISPLAY ILLUMINATION During Power on, the display illumination will activate for approx. 5 seconds. The display illumination can also be activated when the MENU, MON/SCAN, and / button is pressed. CHANNEL SELECTION (GMRS/FRS BAND) Press the MENU button once, and then the / buttons to select one of the 22 GMRS/FRS channels. To confirm the selection, press the PTT button or press the MENU button again to move to the next feature setting. USING THE RADIO IN GROUP MODE Your GXT900/950 Series has GROUP MODE function which lets you make “direct calls” to other people within the group without alerting the entire group. In order to use the GROUP MODE function you need to set the following in your radio: Set Set Set Set Set the radio to Group Mode a Group Code the ID the Caller ID the Ring Tone Note : To communicate between two GXT900/950 Series radios in Group Mode, the radios in your group must be set to the same channel and Group Code selections. Page 11 www.midlandradio.com Model GXT900/950 Series ® SETTING THE RADIO TO GROUP MODE To turn the GROUP MODE on, press the MENU button until the display shows “Gr” blinking, while an “oF” appears on the right of the display. Select “on” by pressing the / buttons and press the PTT button to confrim or press MENU button again to move to the next feature setting. When the radio is in GROUP MODE the Group Mode icon will appear on the display. SETTING GROUP CODES Your GXT900/950 Series has 142 Group Codes available. To select a Group Code press the MENU button while in Group Mode until the Privacy Code blinks, and then the / buttons to select one of the 142 Group Codes. The Privacy Code icon on the display will indicate your Group Code setting. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. SETTING THE ID NUMBER Your GXT900/950 Series has 10 ID Number available. The selected ID Number may be different for each Group Code. To select an ID Number for the current Group Code press the MENU until the display shows “Id”, while the current ID number setting appears blinking on the right of the display. Press the / buttons to select one of the 10 ID Numbers. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. SETTING THE CALLER ID NUMBER You can select your individual 4-digit Caller ID Number to indicate you when making “direct call” to other radios within your group. To set your Caller ID Number within the current channel, Group Code and ID number press the MENU button while in Group Mode 5 times, and then press the / buttons to select “1 ~ 9” on each digit. To move to another digit press the MON/SCAN button. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. Page 12 www.midlandradio.com Model GXT900/950 Series ® SETTING THE RING TONE Your GXT900/950 has 5 selectable Ring Tone. Your selected ring tone will be playbacked when receiving a “direct call” from another person of the same Group Code and ID Number. To select a Ring Tone for the current Group Code and ID Number press the MENU button until an “rt” appears on the display, and then the / buttons to make the selection. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting MAKING A DIRECT CALL Your GXT900/950 Series has a “direct call” function which enables you to call another person without alerting the other people within the group. In order to make a direct call to another radio while in Group Mode, both must have the same channel, Group Code, and ID Number. To make a “direct call” press the CALL button while in Group Mode, an “AL” will appear on the display. Press the / buttons to select the ID Number of the radio that you will call. Press again the CALL button to send the direct call. Only the radio with the same ID Number will receive the call. You can also send a “direct call” to all the radio within the group. Press the CALL button while in Group Mode, an “AL” will appear on the display. Press again the CALL button to send the direct call and all the radio within the group will receive the call. Page 13 www.midlandradio.com Model GXT900/950 Series ® USING THE RADIO IN STANDARD MODE You can set your GXT900/950 Series to Standard Mode to communicate with radios which do not have the Group Mode feature. SETTING THE RADIO TO STANDARD MODE To turn the STANDARD MODE on, press the MENU button until the display shows “Gr” blinking, while an “on” appears on the right of the display. Select “of” by pressing the / buttons and press the PTT button to confrim or press MENU button again to move to the next feature setting. When the radio is in STANDARD MODE the Group Mode icon will disappear on the display. SETTING PRIVACY CODES When the GROUP Mode is turned off, you can use the normal Privacy Codes which is common to other radios which are not set to Group Mode. Your GXT900/950 Series has 142 Privacy Codes available which can only be used on channels 1~22. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button twice, and then the / buttons to select between “Off/CTCSS/ DCS”. Press again the MENU button and the / button to select one of the 38 CTCSS Codes or one of the 104 DCS Codes. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. Note : If you select any CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two GXT900/950 Series radios, all radios in your group must be set to the same channel and Privacy Code selections. The Privacy Code can only be set in channels 1~22. Page 14 www.midlandradio.com Model GXT900/950 Series ® SETTING SCRAMBLER FUNCTION Your GXT900/950 Series has a SCRAMBLER function that will change the sound being transmitted; making it incomprehensible to other user with different radios . This will to enable you to communicate privately with other GXT900/950 with SCRAMBLER function. To turn the SCRAMBLER function on, press the MENU button until the display shows an “Sc” icon while on the right of the “Sc” display, an “of” icon appears. Select “on” by pressing the / buttons and push the PTT key or MENU button. To communicate properly using the SCRAMBLER function, both radios’ SCRAMBLER function must be turned ON. To turn the SCRAMBLER function off, press the MENU button until the display shows an “Sc” icon while on the right of the “Sc” display, an “on” icon appears. Select “of” by pressing the / buttons and push the PTT key or MENU button. TRANSMIT (TX) POWER LEVEL SELECTION Your GXT900/950 Series has 3 power level settings. To select the power level on channels 1~7 and 15~42, press the MENU button until a “Pr” icon will appear blinking on the display. Then press the / buttons to select TRANSMIT POWER LEVEL icon (H: Hi/ M: Mid/L: Lo). To confirm, press the PTT button or press MENU button again to move to the next feature setting. When the Battery Meter drops to 1 bar the TX Power will automatically switch from Hi(H) or Med(M) to Lo(L) level. Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations. VOX (Hands-free Transmission) Your radio has 9 VOX level settings: (oF/1~9). To set VOX, press the MENU button until the display shows “VOX” blinking while on the right of the CHANNEL NUMBER display, an “oF” icon appears. Select “1~9” by pressing the / buttons and push the PTT key, or press MENU button again to move to the next feature setting. VOX will be more sensitive on the “1” setting than on the “9” setting. To turn VOX off, press the MENU button until the display shows “VOX” blinking while on the right of the CHANNEL NUMBER display, a “1~9” icon appears. Select “oF” by pressing the / buttons and push the PTT key, or press MENU button again to move to the next feature setting. Page 15 www.midlandradio.com Model GXT900/950 Series ® SILENT OPERATION Your GXT900/950 Series has a SILENT OPERATION mode. In this mode, all “beeps” and “tones” are disabled. To turn the SILENT OPERATION mode on, press the MENU button until the display shows an “bP” icon while on the right of the “bP” display, an “on” icon appears. Select “of” by pressing the / buttons and push the PTT key or MENU button. To turn the SILENT OPERATION mode off, press the MENU button until the display shows an “bP” icon while on the right of the “bP” display, an “oF” icon appears. Select “on” by pressing the / buttons and push the PTT key or MENU button. ROGER BEEP (end of transmission) TONE When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished. To turn the ROGER BEEP tone on, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “oF” icon appears. Select “on” by pressing the / buttons and push the PTT key, or press MENU button to move to the next feature setting. To turn the ROGER BEEP tone off, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “on” icon appears. Select “oF” by pressing the / buttons and push the PTT key, or press MENU button to move to the next feature setting. CALL ALERT SELECTION Your GXT900 Series has 10 selectable CALL ALERTS (15 for GXT950). To select, press the MENU button until a “CA” icon appears and to the right of the “CA” icon the current CALL ALERT setting is displayed. Then press the / buttons to make the CALL ALERT selections, the radio will emit a corresponding tone for each selection. To confirm, press the PTT button or press MENU button to move to the next feature setting. Note : GXT950 has 5 additional “Animal Sound” CALL Alerts Turkey, Duck, Crow, Cougar, Wolf. Page 16 www.midlandradio.com Model GXT900/950 Series ® VIBRATE ALERT To turn the VIBRATE ALERT on, press the MENU button until the display will show the VIBRATE-ALERT icon blinking, while on the right of the CHANNEL NUMBER, an “oF” icon appears. Select “on” by pressing the / buttons and push the PTT button, or press MENU button. The VIBRATE ALERT icon will remain on the display. To turn the VIBRATE ALERT off, press the MENU button until the display will show the VIBRATE ALERT icon blinking, while on the right of the CHANNEL NUMBER, an “on” icon appears. Select “oF” by pressing the / buttons and push the PTT button, or press MENU button. The VIBRATE ALERT icon will go off. NOAA WEATHER RADIO/SCAN Your GXT900/950 Series has a NOAA WEATHER RADIO function, to enable user to receive weather reports from designated NOAA stations. Your GXT900/950 Series also has a NOAA WEATHER SCAN function, to enable user to scan all the 10 channels of the NOAA WEATHER RADIO. To turn the NOAA WEATHER SCAN on, press and hold the MENU button for 5 seconds while in GMRS mode. The radio will go to WX Band mode and start scanning all the 10 channels and stop on any active channel. When the channel becomes inactive for 10 seconds the radio will resume scanning. To stop the NOAA WEATHER (WX) SCAN and set the channel manually on the WX Band, press the MENU button during NOAA WEATHER (WX) SCAN. The radio will stop scanning and the display will show the current WX Band channel setting and the WX Band icon. While on WX Band mode press the / buttons to select one of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press the PTT button or press MENU button to move to the next feature setting. To turn the NOAA WEATHER RADIO off, press the PTT button. The current GMRS/FRS radio setting will be displayed and the WX BAND icon will go off. NOAA WEATHER ALERT Your GXT900/950 has a NOAA WEATHER ALERT function, to enable you to automatically receive weather alert from designated NOAA stations. Page 17 www.midlandradio.com Model GXT900/950 Series ® The NOAA WEATHER (WX) ALERT is automatically on during NOAA WEATHER SCAN mode. To turn the NOAA WEATHER (WX) ALERT on during normal NOAA WEATHER RADIO mode, press the MENU button twice while in NOAA WEATHER SCAN mode. The display shows "AL", while on the right an "oF" icon appears blinking. Select "on" by pressing the / buttons. To confirm, press the PTT button or press MENU. The radio will return to WX BAND and the WX BAND icon will continue blinking. If the radio receives a WX ALERT signal from a designated NOAA station while on GMRS/FRS Radio mode, the radio will beep for 10 seconds while an "AL" and "In" icon appear on the display, after which will automatically go to WX BAND. If any button is pressed during beeping while on GMRS/FRS Radio mode, the radio will automatically go to WX BAND. To turn the NOAA WEATHER (WX) ALERT off, press the MENU button twice while in WX Band. The display shows "AL", while on the right an "on" icon appears blinking. Select "oF" by pressing the / buttons. To confirm, press the PTT button or press MENU. Note : The WX Alert is automatically ON during WX SCAN mode. EXTERNAL SPEAKER/MICROPHONE JACK Your GXT900/950 Series can be used with an optional external speaker/microphone or headset, freeing your hands for other tasks. To use an optional speaker / microphone or headset: l Open the rubber cap on the side of the radio. l Insert the plug(s) into the SPK/MIC jacks l Place the earbud into your ear, and adjust the mic into your desired position. Page 18 www.midlandradio.com Model GXT900/950 Series ® TROUBLESHOOTING GUIDE PROBLEM SOLUTION No Power - Check battery installation and/or replace batteries Cannot Receive Messages - Confirm the radios have the same channel and Privacy Code settings. - Make sure that you are within range of the other transceivers. - Buildings and other structures may interfere with your communication. (See ABOUT RANGE on Page 9) - Make sure key lock is not on. See "Keypad Lock" (Page 11). - Radio might need to be reset. Turn radio off then on. - Ensure accessory microphone is set properly Radio is not responding to button presses Display is dim - Recharge or replace batteries. Charger not functioning - Contacts on the bottom of the radio may require cleaning. - Ensure the outlet where the charger is plugged into is functioning properly. - Check that the battery pack is installed in the radio properly. USE AND CARE 1. Use a soft damp cloth to clean the radio 2. Do not use alcohol or cleaning solutions to clean the radio. 3. Do not immerse the radio in water. 4. Dry the radio with dry lint-free cloth should it get wet. 5. Turn off the radio and remove the batteries during long-term storage. If you have a problem which you believe requires service, please call first and speak with a service technician. Many problems can be remedied over the phone without returning the unit for service. Page 19 www.midlandradio.com Model GXT900/950 Series ® SPECIFICATIONS Channels 42 GMRS/FRS Channels +142 Privacy Codes 10 NOAA Weather (WX) Band Channels Operating Frequency UHF 462.5500 ~ 467.7125 MHz Power Source 4 AA Alkaline or 6.0V Rechargeable Ni-MH battery pack GMRS/FRS FREQUENCY CHART (MHz) CH. No 10 11 12 13 14 CH. Freq. 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 CH. No 15 16 17 18 19 20 21 22 23 24 25 26 27 28 CH. Freq. 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 CH. No 29 30 31 32 33 34 35 36 37 38 39 40 41 42 CH. Freq. * Channels 8~14 are low-power FRS license free channels NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz) CH. No CH. Freq. 162.550 162.400 162.475 162.425 162.450 CH. No 10 CH. Freq. 162.500 162.525 161.650 161.775 163.275 * Channel 8,9 and 10 are designated Canadian Marine Frequencies CTCSS PRIVACY CODES FREQUENCY CHART (Hz) Code Freq. 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 Code 10 11 12 13 14 15 16 Freq. 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 Code 17 18 19 20 21 22 23 24 Freq. 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 Code 25 26 27 28 29 30 31 32 Freq. 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 Code 33 34 35 36 37 38 Freq. 210.7 218.1 225.7 233.6 241.8 250.3 Note: Privacy codes can be programmed for use on Channels 1~22 only Page 20 www.midlandradio.com Model GXT900/950 Series ® DCS PRIVACY CODE CHART No. CODE No. CODE No. CODE 023 36 251 71 631 025 37 261 72 632 026 38 263 73 654 031 39 265 74 662 032 40 271 75 664 043 41 306 76 703 047 42 311 77 712 051 43 315 78 723 054 44 331 79 731 10 065 45 343 80 732 11 071 46 346 81 734 12 072 47 351 82 743 13 073 48 364 83 754 14 074 49 365 84 036 15 114 50 371 85 053 16 115 51 411 86 122 17 116 52 412 87 145 18 125 53 413 88 212 19 131 54 423 89 225 20 132 55 431 90 246 21 134 56 432 91 252 22 143 57 445 92 255 23 152 58 464 93 266 24 155 59 465 94 274 25 156 60 466 95 325 26 162 61 503 96 332 27 165 62 506 97 356 28 172 63 516 29 174 64 532 98 99 446 452 30 205 65 546 100 454 31 223 66 565 101 455 32 226 67 606 33 243 68 612 102 103 462 523 34 244 69 624 104 526 35 245 70 627 Note: Privacy codes can be programmed for use on Channels 1~22 only Page 21 www.midlandradio.com Model GXT900/950 Series ® LIMITED WARRANTY Midland Radio Corporation will repair or replace, at its option without charge, any Midland FRS/GMRS transceiver which fails due to a defect in material or workmanship within Three Years following the initial consumer purchase. This warranty does not apply to water damage, battery leak or abuse. Accessories have a 90 day warranty from date of purchase, including any antennas, chargers, or earphones. This warranty does not include the cost of labor for removal or re-installation of the product in a vehicle or other mounting. Performance of any obligation under this warranty may be obtained by returning the warranted product, prepaid freight, along with proof of purchase to: Midland Radio Corporation Warranty Service Department 5900 Parretta Drive Kansas City, MO 64120 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Note : The above warranty applies only to merchandise purchased in the United States of America or any of the territories or possessions thereof, or from a U.S. Military exchange. Midland Radio Corporation 5900 Parretta Drive Kansas City, MO 64120 Tel: (816) 241-8500 E-mail: mail@midlandradio.com URL: www.midlandradio.com Page 22 www.midlandradio.com Model GXT900/950 Series ® ACCESSORIES Accessories can be purchased at www.midlandradio.com or fill in the form on the following page and mail it to our address. AVP-7 - 2 Rechargeable battery packs - $19.99 Page 23 www.midlandradio.com Model GXT900/950 Series ® AVP-1 - 2 Over the Ear Mic. Headsets w/ PTT - $19.99 AVP-H H1 - 1 Open Face Helmet Microphone Kit - $49.99 AVP-H H2 - 1 Closed Face Helmet Microphone Kit - $49.99 Page 24 www.midlandradio.com Model GXT900/950 Series ® AVP-H H3 - 2 Surveillance Headset - $39.99 AVP-H H4 - 2 Ear Wrap Headset - $39.99 AVP-H H5 - 2 Behind the Head Headset - $39.99 Page 25 www.midlandradio.com Model GXT900/950 Series Page 26 ® www.midlandradio.com Model GXT900/950 Series ® ACCESSORIES ORDER FORM Please send Money Order or fill in Visa/MasterCard information and mail to the address below. Please DO NOT send cash or checks. Make Money Order to Midland Radio Corporation. Name: _____________________________________________________ Address: ___________________________________________________ City: _____________________ State _____Zip Code _____________ Tel: ______________________ email: ___________________________ CC# _____________________ Type: __________ Exp. ____________ Qty Item Price AVP-7 $19.99 AVP-1 $19.99 AVP-H1 $49.99 AVP-H2 $49.99 AVP-H3 $39.99 AVP-H4 $39.99 AVP-H5 $39.99 Sub-Total Tax (MO, CO, IL, FL only) S&H Total Mail To: Midland Radio Corporation Consumer Dept. 5900 Parretta Drive Kansas City, MO 64120 ---------------Or Call 816.241.8500. ---------------To order online go to www.midlandradio.com ___________ ___________ _____ $14.95 (Applies to Domestic U.S. only. For Hawaii, Alaska, and Puerto Rico S&H will be $36.25 for 1lb and $64.25 for 2lbs or more). Total Page 27 $___________ www.midlandradio.com MIDLAND RADIO CORPORATION 5900 Parretta Drive Kansas City, MO 64120 Call 816.241.8500 visit us at http://www.midlandradio.com Note: Features & Specifications are subject to change without notice. MIDLAND is not responsible for unintentional errors or omissions on its packaging.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 28 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6b286b4a-4700-455b-911f-60cca8f0e241 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2008:03:20 10:47:19-07:00 Create Date : 2007:12:22 13:14:48+08:00 Metadata Date : 2008:03:20 10:47:19-07:00 Document ID : uuid:7e68dd36-dea7-4a4d-ae4e-ef977f58cc3b Instance ID : uuid:eee126c4-4275-49d2-888e-545fbf7b73b0 Format : application/pdf Title : GXT900 Owner's Manual.qxp Creator : Presario Author : PresarioEXIF Metadata provided by EXIF.tools