Midland Radio GXT950 22 Channel GMRS/FRS Transceiver User Manual GXT900 Owner s Manual qxp

Midland Radio Corporation 22 Channel GMRS/FRS Transceiver GXT900 Owner s Manual qxp

Contents

User Manual

Download: Midland Radio GXT950 22 Channel GMRS/FRS Transceiver User Manual GXT900 Owner s Manual qxp
Mirror Download [FCC.gov]Midland Radio GXT950 22 Channel GMRS/FRS Transceiver User Manual GXT900 Owner s Manual qxp
Document ID919632
Application IDnxQCu8FUvWl7L/SLAfPJtA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize95.73kB (1196607 bits)
Date Submitted2008-03-26 00:00:00
Date Available2008-03-26 00:00:00
Creation Date2007-12-22 13:14:48
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2008-03-20 10:47:19
Document TitleGXT900 Owner's Manual.qxp
Document CreatorPScript5.dll Version 5.2
Document Author: Presario

Model GXT900/950 Series
®
TABLE OF CONTENTS
Introduction
Important Notice, FCC Licensing
LCD Display
Controls
Battery Installation
Installing the Belt Clip
Charging the Optional Battery Pack
Low Battery Level Indicator
Operating Your Radio
External Speaker/Microphone Jack
Troubleshooting Guide
Use and Care
Specifications and Frequency Charts
Warranty Information
MIDLAND Family Products
Accessories
Accessories Order Form
9 - 18
18
19
19
20 - 21
22
23
23 - 25
27
Page 3
www.midlandradio.com
Model GXT900/950 Series
®
Welcome to the world of Midland electronics
Congratulations on your purchase of a high quality MIDLAND product.
Your 2-way radio represents the state-of-the-art in high-tech
engineering. Designed for GMRS (General Mobile Radio Service)
operation, this compact package is big in performance. It is a quality
piece of electronic equipment, skillfully constructed with the finest
components. The circuitry is all solid-state and mounted on a rugged
printed circuit board. Your two-way radio is designed for reliable and
trouble-free performance for years to come.
Features
42 GMRS/FRS Channel
142 Privacy Codes (38 CTCSS / 104 DCS)
Water Resistant (IP4 Standard)
Direct Call
VOX
Selectable Call Alert (additional Animal Sound on GXT850)
NOAA Weather Radio
NOAA Weather Alert
VIBRATE ALERT
Scrambler Function
Monitor Function
Roger Beep Tone
Silent Operation
Keypad Lock
Power HI/MED/LO Settings
Speaker / Microphone Jacks
Battery Meter / Battery Low Indicator
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device does not cause harmful interference, and
(2) this radio must accept any interference that may cause undesired operation.
To maintain compliance with FCC’s RF exposure guidelines, for body-worn
operation, this radio has been tested and meets the FCC RF exposure guidelines
when used with Midland Radio Corp. accessories supplied or designated for this
product. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines. (Tested with Headset Model: AVP-1)
Page 4
www.midlandradio.com
Model GXT900/950/850 Series
®
IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION
The GXT900/950 Series operates on GMRS (General Mobile Radio Service)
frequencies which require an FCC (Federal Communications Commission)
license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22,
which comprise the GMRS channels of the GXT900/950 Series. Serious
penalties could result for unlicensed use of GMRS channels, in violation of FCC
rules, as stipulated in the Communications Act's Sections 501 and 502
(amended).
You will be issued a call sign by the FCC which should be used for station
identification when operating the radio on GMRS channels. You should also
cooperate by engaging in permissible transmissions only, avoiding channel
interference with other GMRS users, and being prudent with the length of their
transmission time.
To obtain a license or ask questions about the license application, contact the
FCC at 1-888-CALL FCC or go to the FCC's website:
http://www.fcc.gov and request form 605.
Exposure To Radio Frequency Energy
Your Midland radio is designed to comply with the following national and
international standards and guidelines regarding exposure of human being to radio
frequency electromagnetic energy:
- United States Federal Communications Commission, Code of Federal
Regulations: 47 CFR part 2 sub-part J
- American National Standards Institute (ANSI)/Institute of Electrical &
Electronic Engineers (IEEE) C95. 1-1992
- Institute of Electrical and Electronic Engineer (IEEE) C95. 1-1999 Edition
- National Council on Radiation Protection and Measurements (NCRP) of the
United States, Report 86, 1986
- International Commission on Non-lonizing Radiation Protection (ICNIRP)
1998
To control your exposure and ensure compliance with the general population or
uncontrolled environment exposure limits, transmit no more than 50% of the time.
The radio generates measurable RF energy exposure only when transmitting.
IMPORTANT: Changes or modifications to this unit not expressly approved by
MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set
up to transmit a regulated signal on an assigned frequency. It is against the law to
alter or adjust the settings inside the COMMUNICATOR to exceed those
limitations. Any adjustment to your radio must be made by qualified technicians.
Page 5
www.midlandradio.com
Model GXT900/950 Series
®
LCD DISPLAY
CONTROLS
14
19
20
15
21
16
17
18
Page 6
22
23
1. BATTERY METER – Indicates the
battery level.
2. SCRAMBLER ICON – Indicates when
the Scrambler feature is on.
3. KEY LOCK ICON – Indicates KEY
LOCK mode is on.
4. VOX ICON – Indicates when VOX
mode is active.
10 5. NOAA WEATHER (WX) BAND ICON–
Indicates when the radio is in Weather
Band mode.
11
6. CHANNEL NUMBER – Changes from
12
1~22 on GMRS/FRS band (1~10 on
WX band).
13
7. PRIVACY CODE – Indicates Privacy
Code selected by user (oF~38/oF~104).
8. GROUP MODE ICON – Indicates
when the Group Mode is on.
9. VIBRATE-ALERT ICON – Indicates
when the Vibrate-Alert feature is on.
10. RECEIVE (RX) ICON – Indicates
radio is receiving a transmission.
11. TRANSMIT (TX) ICON – Indicates
radio is transmitting a signal.
12. TRANSMIT POWER LEVEL ICON –
Indicates TX Power setting (H/M/L)
13. PRIVACY CODE ICON – Indicates
Privacy Code setting (CTCSS/DCS).
14. POWER/VOLUME KNOB – Turn clockwise to turn the power on and increase
the volume level. Turn counter-clockwise
to decrease the volume level and turn
the power off.
15. PTT Button – Press and hold to transmit
voice communication.
16. CALL/LOCK Button – Press to send a
CALL Alert signal. Press and hold to turn
KEY LOCK on/off.
17. UP
and DOWN
Button – Make
adjustments in MENU mode..
18. SPEAKER – Built-in speaker.
19. ANTENNA.
20. EXTERNAL SPEAKER/MIC JACK.
21. MENU Button – Press to access Menu
mode. Press and hold for 5 seconds to
activate the NOAA Weather Scan
function.
22. MONITOR/SCAN Button – Press to
enter SCAN mode. Press and hold to
enter MONITOR mode
23. MIC – Built-in microphone.
www.midlandradio.com
Model GXT900/950 Series
®
BATTERY INSTALLATION
Your GXT900/950 Series radio operates with either 4 AA alkaline
batteries or an optional NiMH battery pack. The belt clip should be
removed (see below) to ease installation or removal of the batteries.
To install the batteries:
1. With the back of the radio facing you, remove the belt clip (see
diagram below) for easy access, then remove the Battery Cover
by pulling down the Battery Cover Latch and lifting up the Battery
Cover from the radio.
2. Insert 4 AA batteries observing the polarity as shown. Installing
the batteries incorrectly will prevent the radio from operating or
may damage the radio.
3. Return the Battery Cover by sliding it up on the radio and push up
the Battery Cover Latch until it locks into place. Replace the belt
clip, making sure it locks into place.
BATTERY COVER
One Battery inserted
in this slot
BATTERY
COMPARTMENT
BATTERY COVER
LATCH
BELT CLIP
LOCK TAB
INSTALLING THE BELT CLIP
To install the BELT CLIP, slide the clip down into
the slot on the back of the radio until the BELT
CLIP LATCH clicks. To remove the BELT CLIP,
press the LOCK TAB down , then gently pull the
belt clip up toward the top of the radio.
BELT CLIP
LATCH
Page 7
www.midlandradio.com
Model GXT900/950 Series
®
CHARGING THE OPTIONAL BATTERY PACK
Your GXT900/950 Series is equipped for using an optional
rechargeable NiMH battery pack (included) which can be recharged
using a desktop charger (included). Initial charge time is 24 hours with
a charge time of 12 hours thereafter. For maximum battery life, we
recommend charging the battery pack when the low battery icon
comes on. Remove the radios from the charger when the charge time
expires.
To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios.
2. Connect the AC adapter into an AC wall outlet.
3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if
charging in vehicle) into the desktop charger jack.
4. Place the units into the desktop charger slot and note that the LED
indicator with RED color will light up, indicating charging function.
In order to ensure that the battery pack is fully charged, it is
recommended that the battery pack be charged for at least 12
hours with the radio turned OFF.
1. Only use our NiMH battery pack.
2. Do not attempt to charge alkaline batteries or any batteries
or battery packs other than the one indicated in the manual.
This may cause leakage and damage to the radio.
3. For long term storage of the radio, turn the radio OFF and
remove the batteries from the radio.
BATTERY LEVEL INDICATOR
Your GXT900/950 Series has a BATTERY LEVEL METER
that shows the battery power level. The greater the number of bars
visible, the stronger the battery level. When the battery level is low,
the Battery Shell
icon and “Lo bt” will flash in the display
indicating your batteries should be replaced or recharged if using a
rechargeable battery pack.
Page 8
www.midlandradio.com
Model GXT900/950 Series
®
OPERATING YOUR RADIO
POWER ON/OFF AND VOLUME
Rotate the POWER/VOLUME knob clockwise to turn the radio on and
increase the volume level. Rotate the control counter-clockwise to
reduce the volume level and to turn the radio off. During Power On,
the radio will beep 2 times with different tones, the LCD will display all
icons for 1 second and the LCD display will indicate the last channel
selected.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same
channel and Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your mouth.
2. Press and hold the PTT button and speak in a normal voice
into the microphone. The TX icon will appear continuously
on the LCD Display while transmitting.
3. To receive a call, release the PTT button. The RX icon will
appear on the display when your radio is receiving a transmission.
ABOUT RANGE
Your GXT Series radios are designed to give you maximum range
under optimum conditions.
Optimum Conditions are:
l Over water
l Open rural areas without obstructions
l Flat areas where you can see the other person
To ensure you get maximum range:
l Be sure to use fresh or fully charged batteries - low batteries will
cause low power conditions
l Be sure you are on a GMRS channel - FRS channels are
restricted by the FCC to low power
l Be sure to set your radio to use Hi power.
Page 9
www.midlandradio.com
Model GXT900/950 Series
®
GXT900/950 SERIES QUICK REFERENCE CHART
MENU
Channel
Group Mode
1~42
Off
MENU
On
Group Code
ID Setting
0~142
1~10
Caller ID
4 digit code (0~9),
Press MON to
choose each digit
Ring Tone
0~5
Privacy
Scrambler
Power
eVOX
Silent Operation
Roger Beep
Call Tone
Vibrate
Off
On/Off
H/M/L
oF~9
On/Off
On/Off
1~10
On/Off
Press and hold the
MENU button for
5 seconds
WX Channel
WX Alert
1~15 for GXT950
1~10
CTCSS
1~38
DCS
1~104
On/Off
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your GXT900/950 Series can scan all 42 channels for activity. To
enter, quickly press the SCAN button. Repeat the same procedure to
exit. Your radio will rapidly scan each of the 42 channels and stop on
any active channel. Your radio will resume scanning after 4 seconds
when the channel is no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer pressed.
To resume scanning, quickly press the / button.
CALL ALERT
Your GXT900/950 Series can transmit a call alert for a fixed length of
time. To send a call alert, press the CALL button. The TX icon will
appear while transmitting a call alert and a tone can be heard on the
speaker for confirmation.
The GXT900 has 10 call alert selections while the GXT950 has 15 call
alerts including 5 “animal sound” call alerts - Turkey, Duck, Crow,
Cougar, Wolf.
Page 10
www.midlandradio.com
Model GXT900/950 Series
®
KEYPAD LOCK
To avoid accidentally changing the radio setting, press the LOCK
button for 2 seconds. The KEY LOCK icon will appear on the display.
PTT and CALL will still be active. Repeat the same procedure to
unlock the keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5
seconds. The display illumination can also be activated when the
MENU, MON/SCAN, and / button is pressed.
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the / buttons to select one
of the 22 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
USING THE RADIO IN GROUP MODE
Your GXT900/950 Series has GROUP MODE function which lets you
make “direct calls” to other people within the group without alerting
the entire group.
In order to use the GROUP MODE function you need to set the
following in your radio:
Set
Set
Set
Set
Set
the radio to Group Mode
a Group Code
the ID
the Caller ID
the Ring Tone
Note : To communicate between two GXT900/950 Series radios
in Group Mode, the radios in your group must be set to
the same channel and Group Code selections.
Page 11
www.midlandradio.com
Model GXT900/950 Series
®
SETTING THE RADIO TO GROUP MODE
To turn the GROUP MODE on, press the MENU button until the
display shows “Gr” blinking, while an “oF” appears on the right of the
display. Select “on” by pressing the / buttons and press the PTT
button to confrim or press MENU button again to move to the next
feature setting.
When the radio is in GROUP MODE the Group Mode icon will appear
on the display.
SETTING GROUP CODES
Your GXT900/950 Series has 142 Group Codes available. To select
a Group Code press the MENU button while in Group Mode until the
Privacy Code blinks, and then the / buttons to select one of the 142
Group Codes. The Privacy Code icon on the display will indicate your
Group Code setting. To confirm the selection, press the PTT button or
press MENU button again to move to the next feature setting.
SETTING THE ID NUMBER
Your GXT900/950 Series has 10 ID Number available. The selected
ID Number may be different for each Group Code. To select an ID
Number for the current Group Code press the MENU until the display
shows “Id”, while the current ID number setting appears blinking on
the right of the display. Press the / buttons to select one of the 10
ID Numbers. To confirm the selection, press the PTT button or press
MENU button again to move to the next feature setting.
SETTING THE CALLER ID NUMBER
You can select your individual 4-digit Caller ID Number to indicate you
when making “direct call” to other radios within your group. To set
your Caller ID Number within the current channel, Group Code and
ID number press the MENU button while in Group Mode 5 times, and
then press the / buttons to select “1 ~ 9” on each digit. To move to
another digit press the MON/SCAN button. To confirm the selection,
press the PTT button or press MENU button again to move to the next
feature setting.
Page 12
www.midlandradio.com
Model GXT900/950 Series
®
SETTING THE RING TONE
Your GXT900/950 has 5 selectable Ring Tone. Your selected ring tone
will be playbacked when receiving a “direct call” from another person
of the same Group Code and ID Number. To select a Ring Tone for
the current Group Code and ID Number press the MENU button until
an “rt” appears on the display, and then the / buttons to make the
selection. To confirm the selection, press the PTT button or press
MENU button again to move to the next feature setting
MAKING A DIRECT CALL
Your GXT900/950 Series has a “direct call” function which enables
you to call another person without alerting the other people within the
group.
In order to make a direct call to another radio while in Group Mode,
both must have the same channel, Group Code, and ID Number.
To make a “direct call” press the CALL button while in Group Mode,
an “AL” will appear on the display. Press the / buttons to select the
ID Number of the radio that you will call. Press again the CALL
button to send the direct call. Only the radio with the same ID Number
will receive the call.
You can also send a “direct call” to all the radio within the group.
Press the CALL button while in Group Mode, an “AL” will appear on
the display. Press again the CALL button to send the direct call and
all the radio within the group will receive the call.
Page 13
www.midlandradio.com
Model GXT900/950 Series
®
USING THE RADIO IN STANDARD MODE
You can set your GXT900/950 Series to Standard Mode to communicate with radios which do not have the Group Mode feature.
SETTING THE RADIO TO STANDARD MODE
To turn the STANDARD MODE on, press the MENU button until the
display shows “Gr” blinking, while an “on” appears on the right of the
display. Select “of” by pressing the / buttons and press the PTT
button to confrim or press MENU button again to move to the next
feature setting.
When the radio is in STANDARD MODE the Group Mode icon will
disappear on the display.
SETTING PRIVACY CODES
When the GROUP Mode is turned off, you can use the normal Privacy
Codes which is common to other radios which are not set to Group
Mode. Your GXT900/950 Series has 142 Privacy Codes available
which can only be used on channels 1~22. The selected Privacy
Code may be different for each channel. To select a Privacy Code for
the current channel press the MENU button twice, and then the /
buttons to select between “Off/CTCSS/ DCS”. Press again the MENU
button and the / button to select one of the 38 CTCSS Codes or
one of the 104 DCS Codes.
The Privacy Code icon on the display will indicate whether you set
your Privacy Code in CTCSS or DCS mode. To confirm the selection,
press the PTT button or press MENU button again to move to the next
feature setting.
Note : If you select any CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF" will disable the Privacy
feature. To communicate between two GXT900/950
Series radios, all radios in your group must be set to the
same channel and Privacy Code selections. The Privacy
Code can only be set in channels 1~22.
Page 14
www.midlandradio.com
Model GXT900/950 Series
®
SETTING SCRAMBLER FUNCTION
Your GXT900/950 Series has a SCRAMBLER function that will change
the sound being transmitted; making it incomprehensible to other user
with different radios . This will to enable you to communicate privately
with other GXT900/950 with SCRAMBLER function.
To turn the SCRAMBLER function on, press the MENU button until the
display shows an “Sc” icon while on the right of the “Sc” display, an “of”
icon appears. Select “on” by pressing the / buttons and push the PTT
key or MENU button.
To communicate properly using the SCRAMBLER function, both
radios’ SCRAMBLER function must be turned ON.
To turn the SCRAMBLER function off, press the MENU button until the
display shows an “Sc” icon while on the right of the “Sc” display, an “on”
icon appears. Select “of” by pressing the / buttons and push the PTT
key or MENU button.
TRANSMIT (TX) POWER LEVEL SELECTION
Your GXT900/950 Series has 3 power level settings. To select the power
level on channels 1~7 and 15~42, press the MENU button until a “Pr”
icon will appear blinking on the display. Then press the / buttons to
select TRANSMIT POWER LEVEL icon (H: Hi/ M: Mid/L: Lo). To
confirm, press the PTT button or press MENU button again to move to
the next feature setting. When the Battery Meter drops to 1 bar
the TX Power will automatically switch from Hi(H) or Med(M) to
Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
VOX (Hands-free Transmission)
Your radio has 9 VOX level settings: (oF/1~9).
To set VOX, press the MENU button until the display shows “VOX”
blinking while on the right of the CHANNEL NUMBER display, an
“oF” icon appears. Select “1~9” by pressing the / buttons and push
the PTT key, or press MENU button again to move to the next feature
setting.
VOX will be more sensitive on the “1” setting than on the “9” setting.
To turn VOX off, press the MENU button until the display shows “VOX”
blinking while on the right of the CHANNEL NUMBER display, a “1~9”
icon appears. Select “oF” by pressing the / buttons and push the PTT
key, or press MENU button again to move to the next feature setting.
Page 15
www.midlandradio.com
Model GXT900/950 Series
®
SILENT OPERATION
Your GXT900/950 Series has a SILENT OPERATION mode. In this
mode, all “beeps” and “tones” are disabled.
To turn the SILENT OPERATION mode on, press the MENU button
until the display shows an “bP” icon while on the right of the “bP”
display, an “on” icon appears. Select “of” by pressing the / buttons
and push the PTT key or MENU button.
To turn the SILENT OPERATION mode off, press the MENU button
until the display shows an “bP” icon while on the right of the “bP”
display, an “oF” icon appears. Select “on” by pressing the / buttons
and push the PTT key or MENU button.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“oF” icon appears. Select “on” by pressing the / buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an
“on” icon appears. Select “oF” by pressing the / buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
CALL ALERT SELECTION
Your GXT900 Series has 10 selectable CALL ALERTS (15 for
GXT950). To select, press the MENU button until a “CA” icon appears
and to the right of the “CA” icon the current CALL ALERT setting is
displayed. Then press the / buttons to make the CALL ALERT
selections, the radio will emit a corresponding tone for each selection.
To confirm, press the PTT button or press MENU button to move to the
next feature setting.
Note : GXT950 has 5 additional “Animal Sound” CALL Alerts Turkey, Duck, Crow, Cougar, Wolf.
Page 16
www.midlandradio.com
Model GXT900/950 Series
®
VIBRATE ALERT
To turn the VIBRATE ALERT on, press the MENU button until the
display will show the VIBRATE-ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an “oF” icon appears. Select “on” by
pressing the / buttons and push the PTT button, or press MENU
button. The VIBRATE ALERT icon will remain on the display.
To turn the VIBRATE ALERT off, press the MENU button until the
display will show the VIBRATE ALERT icon blinking, while on the right
of the CHANNEL NUMBER, an “on” icon appears. Select “oF” by
pressing the / buttons and push the PTT button, or press MENU
button. The VIBRATE ALERT icon will go off.
NOAA WEATHER RADIO/SCAN
Your GXT900/950 Series has a NOAA WEATHER RADIO function, to
enable user to receive weather reports from designated NOAA
stations.
Your GXT900/950 Series also has a NOAA WEATHER SCAN
function, to enable user to scan all the 10 channels of the NOAA
WEATHER RADIO.
To turn the NOAA WEATHER SCAN on, press and hold the MENU
button for 5 seconds while in GMRS mode. The radio will go to WX
Band mode and start scanning all the 10 channels and stop on any
active channel. When the channel becomes inactive for 10 seconds
the radio will resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the WX Band, press the MENU button during NOAA
WEATHER (WX) SCAN. The radio will stop scanning and the display
will show the current WX Band channel setting and the WX Band
icon. While on WX Band mode press the / buttons to select one
of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press
the PTT button or press MENU button to move to the next feature
setting.
To turn the NOAA WEATHER RADIO off, press the PTT button. The
current GMRS/FRS radio setting will be displayed and the WX BAND
icon will go off.
NOAA WEATHER ALERT
Your GXT900/950 has a NOAA WEATHER ALERT function, to enable
you to automatically receive weather alert from designated NOAA
stations.
Page 17
www.midlandradio.com
Model GXT900/950 Series
®
The NOAA WEATHER (WX) ALERT is automatically on during NOAA
WEATHER SCAN mode.
To turn the NOAA WEATHER (WX) ALERT on during normal NOAA
WEATHER RADIO mode, press the MENU button twice while in
NOAA WEATHER SCAN mode. The display shows "AL", while on
the right an "oF" icon appears blinking. Select "on" by pressing the
/ buttons. To confirm, press the PTT button or press MENU. The
radio will return to WX BAND and the WX BAND icon will continue
blinking. If the radio receives a WX ALERT signal from a designated
NOAA station while on GMRS/FRS Radio mode, the radio will beep
for 10 seconds while an "AL" and "In" icon appear on the display,
after which will automatically go to WX BAND.
If any button is pressed during beeping while on GMRS/FRS Radio
mode, the radio will automatically go to WX BAND.
To turn the NOAA WEATHER (WX) ALERT off, press the MENU
button twice while in WX Band. The display shows "AL", while on the
right an "on" icon appears blinking. Select "oF" by pressing the
/ buttons. To confirm, press the PTT button or press MENU.
Note : The WX Alert is automatically ON during WX SCAN
mode.
EXTERNAL SPEAKER/MICROPHONE JACK
Your GXT900/950 Series can be used with an
optional external speaker/microphone or headset,
freeing your hands for other tasks. To use an
optional speaker / microphone or headset:
l Open the rubber cap on the side of the radio.
l Insert the plug(s) into the SPK/MIC jacks
l Place the earbud into your ear, and adjust the
mic into your desired position.
Page 18
www.midlandradio.com
Model GXT900/950 Series
®
TROUBLESHOOTING GUIDE
PROBLEM
SOLUTION
No Power
- Check battery installation and/or replace batteries
Cannot Receive
Messages
- Confirm the radios have the same channel
and Privacy Code settings.
- Make sure that you are within range of the other
transceivers.
- Buildings and other structures may interfere with
your communication.
(See ABOUT RANGE on Page 9)
- Make sure key lock is not on. See "Keypad Lock"
(Page 11).
- Radio might need to be reset. Turn radio off then
on.
- Ensure accessory microphone is set properly
Radio is not responding
to button presses
Display is dim
- Recharge or replace batteries.
Charger not functioning
- Contacts on the bottom of the radio may require
cleaning.
- Ensure the outlet where the charger is plugged
into is functioning properly.
- Check that the battery pack is installed in the
radio properly.
USE AND CARE
1. Use a soft damp cloth to clean the radio
2. Do not use alcohol or cleaning solutions to clean the radio.
3. Do not immerse the radio in water.
4. Dry the radio with dry lint-free cloth should it get wet.
5. Turn off the radio and remove the batteries during long-term
storage.
If you have a problem which you believe requires service, please
call first and speak with a service technician. Many problems can
be remedied over the phone without returning the unit for
service.
Page 19
www.midlandradio.com
Model GXT900/950 Series
®
SPECIFICATIONS
Channels
42 GMRS/FRS Channels +142 Privacy Codes
10 NOAA Weather (WX) Band Channels
Operating Frequency UHF 462.5500 ~ 467.7125 MHz
Power Source
4 AA Alkaline or 6.0V Rechargeable Ni-MH battery pack
GMRS/FRS FREQUENCY CHART (MHz)
CH. No
10
11
12
13
14
CH. Freq.
462.5625
462.5875
462.6125
462.6375
462.6625
462.6875
462.7125
467.5625
467.5875
467.6125
467.6375
467.6625
467.6875
467.7125
CH. No
15
16
17
18
19
20
21
22
23
24
25
26
27
28
CH. Freq.
462.5500
462.5750
462.6000
462.6250
462.6500
462.6750
462.7000
462.7250
CH. No
29
30
31
32
33
34
35
36
37
38
39
40
41
42
CH. Freq.
* Channels 8~14 are low-power FRS license free channels
NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz)
CH. No
CH. Freq.
162.550
162.400
162.475
162.425
162.450
CH. No
10
CH. Freq.
162.500
162.525
161.650
161.775
163.275
* Channel 8,9 and 10 are designated Canadian Marine Frequencies
CTCSS PRIVACY CODES FREQUENCY CHART (Hz)
Code
Freq.
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
Code
10
11
12
13
14
15
16
Freq.
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
Code
17
18
19
20
21
22
23
24
Freq.
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
Code
25
26
27
28
29
30
31
32
Freq.
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
Code
33
34
35
36
37
38
Freq.
210.7
218.1
225.7
233.6
241.8
250.3
Note: Privacy codes can be programmed for use on Channels 1~22 only
Page 20
www.midlandradio.com
Model GXT900/950 Series
®
DCS PRIVACY CODE CHART
No.
CODE
No.
CODE
No.
CODE
023
36
251
71
631
025
37
261
72
632
026
38
263
73
654
031
39
265
74
662
032
40
271
75
664
043
41
306
76
703
047
42
311
77
712
051
43
315
78
723
054
44
331
79
731
10
065
45
343
80
732
11
071
46
346
81
734
12
072
47
351
82
743
13
073
48
364
83
754
14
074
49
365
84
036
15
114
50
371
85
053
16
115
51
411
86
122
17
116
52
412
87
145
18
125
53
413
88
212
19
131
54
423
89
225
20
132
55
431
90
246
21
134
56
432
91
252
22
143
57
445
92
255
23
152
58
464
93
266
24
155
59
465
94
274
25
156
60
466
95
325
26
162
61
503
96
332
27
165
62
506
97
356
28
172
63
516
29
174
64
532
98
99
446
452
30
205
65
546
100
454
31
223
66
565
101
455
32
226
67
606
33
243
68
612
102
103
462
523
34
244
69
624
104
526
35
245
70
627
Note: Privacy codes can be programmed for use on Channels 1~22 only
Page 21
www.midlandradio.com
Model GXT900/950 Series
®
LIMITED WARRANTY
Midland Radio Corporation will repair or replace, at its option without
charge, any Midland FRS/GMRS transceiver which fails due to a
defect in material or workmanship within Three Years following the
initial consumer purchase. This warranty does not apply to water
damage, battery leak or abuse.
Accessories have a 90 day warranty from date of purchase, including
any antennas, chargers, or earphones. This warranty does not include
the cost of labor for removal or re-installation of the product in a
vehicle or other mounting. Performance of any obligation under this
warranty may be obtained by returning the warranted product, prepaid
freight, along with proof of purchase to:
Midland Radio Corporation
Warranty Service Department
5900 Parretta Drive
Kansas City, MO 64120
This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
Note : The above warranty applies only to merchandise purchased in
the United States of America or any of the territories or possessions
thereof, or from a U.S. Military exchange.
Midland Radio Corporation
5900 Parretta Drive
Kansas City, MO 64120
Tel: (816) 241-8500
E-mail: mail@midlandradio.com
URL: www.midlandradio.com
Page 22
www.midlandradio.com
Model GXT900/950 Series
®
ACCESSORIES
Accessories can be purchased at www.midlandradio.com or fill in
the form on the following page and mail it to our address.
AVP-7
- 2 Rechargeable battery packs
- $19.99
Page 23
www.midlandradio.com
Model GXT900/950 Series
®
AVP-1
- 2 Over the Ear Mic.
Headsets w/ PTT
- $19.99
AVP-H
H1
- 1 Open Face Helmet
Microphone Kit
- $49.99
AVP-H
H2
- 1 Closed Face Helmet
Microphone Kit
- $49.99
Page 24
www.midlandradio.com
Model GXT900/950 Series
®
AVP-H
H3
- 2 Surveillance Headset
- $39.99
AVP-H
H4
- 2 Ear Wrap Headset
- $39.99
AVP-H
H5
- 2 Behind the Head Headset
- $39.99
Page 25
www.midlandradio.com
Model GXT900/950 Series
Page 26
®
www.midlandradio.com
Model GXT900/950 Series
®
ACCESSORIES ORDER FORM
Please send Money Order or fill in Visa/MasterCard information and
mail to the address below. Please DO NOT send cash or checks.
Make Money Order to Midland Radio Corporation.
Name: _____________________________________________________
Address: ___________________________________________________
City: _____________________ State _____Zip Code _____________
Tel: ______________________ email: ___________________________
CC# _____________________ Type: __________ Exp. ____________
Qty
Item
Price
AVP-7
$19.99
AVP-1
$19.99
AVP-H1
$49.99
AVP-H2
$49.99
AVP-H3
$39.99
AVP-H4
$39.99
AVP-H5
$39.99
Sub-Total
Tax (MO, CO, IL, FL only)
S&H
Total
Mail To:
Midland Radio Corporation
Consumer Dept.
5900 Parretta Drive
Kansas City, MO 64120
---------------Or Call 816.241.8500.
---------------To order online go to
www.midlandradio.com
___________
___________
_____ $14.95
(Applies to Domestic U.S. only.
For Hawaii, Alaska, and Puerto
Rico S&H will be $36.25 for 1lb
and $64.25 for 2lbs or more).
Total
Page 27
$___________
www.midlandradio.com
MIDLAND RADIO CORPORATION
5900 Parretta Drive
Kansas City, MO 64120
Call 816.241.8500
visit us at http://www.midlandradio.com
Note: Features & Specifications are subject to change without notice.
MIDLAND is not responsible for unintentional errors or omissions on its
packaging.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 28
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6b286b4a-4700-455b-911f-60cca8f0e241
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:03:20 10:47:19-07:00
Create Date                     : 2007:12:22 13:14:48+08:00
Metadata Date                   : 2008:03:20 10:47:19-07:00
Document ID                     : uuid:7e68dd36-dea7-4a4d-ae4e-ef977f58cc3b
Instance ID                     : uuid:eee126c4-4275-49d2-888e-545fbf7b73b0
Format                          : application/pdf
Title                           : GXT900 Owner's Manual.qxp
Creator                         : Presario
Author                          : Presario
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MMAGXT950

Navigation menu