Midland Radio XT511 FRS/ GMRS Combination & AM/ FM/ Weather Receiver User Manual XT511 Manual RevA qxp
Midland Radio Corporation FRS/ GMRS Combination & AM/ FM/ Weather Receiver XT511 Manual RevA qxp
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 800396 |
| Application ID | mwmQQtd798tYr2hKcItVoA== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 80.79kB (1009845 bits) |
| Date Submitted | 2007-06-05 00:00:00 |
| Date Available | 2007-06-06 00:00:00 |
| Creation Date | 2007-06-05 21:07:59 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2007-06-05 21:07:59 |
| Document Title | XT511 Manual (RevA).qxp |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Presario |
Model XT511 Series ® TABLE OF CONTENTS Introduction Important Notice, FCC Licensing LCD Display Controls Battery Installation Installing the Belt Clip Charging the Optional Battery Pack Low Battery Level Indicator Operating Your Radio External Speaker/Microphone Jack Troubleshooting Guide Use and Care Specifications and Frequency Charts Warranty Information MIDLAND Family Products Accessories Accessories Order Form 8 - 13 14 15 15 16 - 17 18 19 19 - 22 23 Page 2 www.midlandradio.com Model XT511 Series ® Welcome to the world of Midland electronics Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents the state-of-the-art in high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big in performance. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. Features - 22 GMRS/FRS Channel - 121 Privacy Codes (38 CTCSS / 83 DCS) - AM/FM Receiver - VOX - Selectable Call Alert - NOAA Weather Radio - NOAA Weather Alert - VIBRATE ALERT - Scan Function - MONITOR Function - Dual Watch Function - Roger Beep Tone - Silent Operation - Keypad Lock - Power HI/MED/LO Settings - Flashlight - Watch/Alarm Clock Function - Crank Dynamo Battery Charging Capability - USB Jack (For Mobile Phone Charging) - Speaker / Microphone Jacks - Battery Meter / Battery Low Indicator This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. (Tested with Headset Model: AVP-1) Page 3 www.midlandradio.com Model XT511 Series ® IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION The XT511 Series operates on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the GMRS channels of the XT511 Series. Serious penalties could result for unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Act's Sections 501 and 502 (amended). You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of their transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www.fcc.gov and request form 605. Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human being to radio frequency electromagnetic energy: - United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J - American National Standards Institute (ANSI)/Institute of Electrical & Electronic Engineers (IEEE) C95. 1-1992 - Institute of Electrical and Electronic Engineer (IEEE) C95. 1-1999 Edition - National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 - International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. IMPORTANT: Changes or modifications to this unit not expressly approved by MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians. Page 4 www.midlandradio.com Model XT511 Series ® LCD DISPLAY 10 11 12 13 14 15 16 17 18 1. NOAA WEATHER (WX) ALERT ICON – Indicates the NOAA Weather Alert function is on. 2. TRANSMIT (TX) ICON – Indicates radio is transmitting a signal. 3. RECEIVE (RX) ICON – Indicates radio is receiving a transmission. 4. DUAL WATCH ICON – Indicates the Dual Watch function is on. 5. TRANSMIT POWER LEVEL ICON – Indicates TX Power setting (H/L) 6. WATCH AM/PM ICON – Indicates the watch is set in AM or PM. 7. CHANNEL NUMBER – Changes from 1~22 on GMRS/FRS band (1~7 on WX band). This is also used to indicate in part the current AM/FM receiver frequency setting and the current Watch setting. 8. AM/FM RECEIVER ICON – Indicates radio is in AM or FM receiver mode. 9. PRIVACY CODE – Indicates Privacy Code selected by user (oF~38/oF~83). This is also used to indicate in part the current AM/FM receiver frequency setting and the current Watch setting. Page 5 10. VOX ICON – Indicates when VOX mode is active. 11. KEY LOCK ICON – Indicates KEY LOCK mode is on. 12. SCAN ICON – Indicates when the radio is in Scan mode. 13. KEY TONE ICON – Indicates radio’s Key Beep Tone is on. 14. BATTERY METER – Indicates the battery level. 15. ROGER BEEP ICON – Indicates radio’s Roger Beep Tone is on. 16. ALARM CLOCK ICON – Indicates when the Alarm Clock is on. 17. NOAA WEATHER (WX) BAND ICON – Indicates when the radio is in Weather Band mode. 18. PRIVACY CODE ICON – Indicates Privacy Code setting (CTCSS/DCS). www.midlandradio.com Model XT511 Series ® CONTROLS 19 28 20 29 30 21 31 22 32 23 24 33 NOAA’s National Weather Service 34 25 35 26 36 27 37 19. ANTENNA 20. MONITOR / ALARM ON/OFF Button – Press to turn on the Monitor function in GMRS mode. Press and hold to turn alarm on/off in Watch mode. 21. SCAN/MINUTE Button – Press to set the Scan mode on/off in GMRS mode. Press to change the Minute setting in Watch mode. 22. LOCK/CALL / HOUR Button – Press and hold to set the key pad lock on/off in GMRS mode. Press to send a CALL Alert signal in GMRS mode. Press to change the Hour setting in Watch mode. 23. FLASHLIGHT – Built-in flashlight. 24. USB JACK – used for charging mobile phone thru the Crank Dynamo. 25. EXTERNAL SPEAKER/MIC JACK. 26. EXTERNAL CHARGER JACK 27. SPEAKER – Built-in speaker. 28. MENU Button – Press to access Menu mode. 29. PTT/SELECT/SNOOZE Button – Press and hold to transmit voice communication in GMRS mode. Press to confirm the selection in MENU and Watch mode. Press to activate SNOOZE function in Watch mode. Page 6 30. CRANK DYNAMO HANDLE – Rotate clockwise to charge the NiMH battery pack. 31. BAND SWITCH – used to switch between AM/FM/WX/GMRS mode. 32. TUNING KNOB – Rotate clockwise/counter clockwise to make adjustment in the MENU mode. It can also make adjusment in the Watch and AM/FM receiver mode. 33. BATTERY SOURCE SWITCH – used to between Alkaline and Rechargeable NiMH batteries. 34. LIGHT ON/OFF SWITCH – used to turn the FLASHLIGHT on/off. 35. TONE CONTROL KNOB – Turn clockwise / counter-clockwise to increase/decrease the tone. 36. POWER/VOLUME KNOB – Turn clockwise to turn the power on and increase the volume level. Turn counter-clockwise to decrease the volume level and turn the power off. 37. MIC – Built-in microphone. www.midlandradio.com Model XT511 Series ® BATTERY INSTALLATION Your GXT710/735/750/756/757 Series radio operates with either 4 AA alkaline batteries or an optional NiMH battery pack. To install the batteries: 1. With the back of the radio facing you, remove the Battery Cover by pressing down the Battery Cover Lock Tab until it unlocks and flipping it out from the radio. 2. Insert 4 AA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit. Also install the NiMH battery pack as shown below. 3. Return the Battery Cover by flipping it into the back of the radio until the Battery Cover Lock Tab locks into place. Battery Cover Lock Tab Alkaline Batteries NiMH Battery Pack INSTALLING THE SHOULDER STRAP To install the SHOULDER STRAP, slide the SHOULDER STRAP CLIP down into the metal pins on the top of the radio until it locks into place. To remove the SHOULDER STRAP, press the SHOULDER STRAP CLIP tab down, then remove it from the radio. Page 7 www.midlandradio.com Model XT511 Series ® CHARGING THE OPTIONAL BATTERY PACK Your XT511 Series is equipped for using an rechargeable NiMH battery pack which can be recharged using an AC wall adapter (included) or a DC adapter (included). Initial charge time is 24 hours with a charge time of 12 hours thereafter. For maximum battery life, we recommend charging the battery pack when the low battery icon comes on. Remove the radios from the charger when the charge time expires. In order to ensure that the battery pack is fully charged, it is recommended that the battery pack be charged for at least 12 hours with the radio turned OFF. You can also charge the rechargeable NiMH battery pack using the Crank Dynamo. To charge using the Crank Dynamo rotate rapidly the Crank Dynamo handle clockwise. To get the best charging condition, it is recommended to charge the battery pack thru the Crank Dynamo with the radio turned OFF. 1. Only use our NiMH battery pack. 2. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio. 3. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio. BATTERY LEVEL INDICATOR Your XT511 Series has a BATTERY LEVEL METER that shows the battery power level. The greater the number of bars visible, the stronger the battery level. When the battery level is low, the Battery Shell icon will flash in the display indicating your batteries should be replaced or recharged if using a rechargeable battery pack. SELECTING THE BATTERY SOURCE Your XT511 Series can use either an Alkaline battery or the rechargeable NiMH battery pack. Just set the BATTERY SOURCE switch to either “Alkaline” or “Rechargeable” (for NiMH battery pack) mode. Page 8 www.midlandradio.com Model XT511 Series ® OPERATING YOUR RADIO SETTING THE RADIO TO GMRS/FRS MODE To set the XT511 to GMRS/FRS mode, move the BAND switch in GMRS/FRS position. The LCD will show the current GMRS/FRS channel setting. POWER ON/OFF AND VOLUME Rotate the POWER/VOLUME knob clockwise to turn the radio on and increase the volume level. Rotate the control counter-clockwise to reduce the volume level and to turn the radio off. During Power On, the LCD will display all icons for 1 second and the LCD display will indicate the last channel/frequency selected. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the same channel and Privacy Code. 1. Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display while transmitting. When using a HAND MIC, press and hold the PTT button on the side of the HAND MICand speak in a normal voice. For maximum clarity, hold the HAND MIC 2 to 3 inches from your mouth. 2. To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission. ABOUT RANGE Your XT511 Series radios are designed to give you maximum range under optimum conditions. Optimum Conditions are: l Over water l Open rural areas without obstructions l Flat areas where you can see the other person To ensure you get maximum range: l Be sure to use fresh or fully charged batteries - low batteries will cause low power conditions l Be sure you are on a GMRS channel - FRS channels are restricted by the FCC to low power l Be sure to set your radio to use Hi power. l Be sure to point the ANTENNA upward. Page 9 www.midlandradio.com Model XT511 Series ® GXT710/735/750/756/757 SERIES QUICK REFERENCE CHART Only when Dual Watch is ON MENU Channel Privacy 1~22 WX Channel WX Alert 1~10 On/Off Power VOX Call Alert Roger Beep Silent Operation Dual Watch H/L oF/1/2/3 1~5 On/Off On/Off 1~22 Privacy CTCSS oF~38 CTCSS oF~38 DCS oF~83 DCS oF~83 CHANNEL SELECTION (GMRS/FRS BAND) Turn the TUNING knob clockwise or counter-clockwise to select one of the 22 GMRS/FRS channels. MONITOR Pressing the MONITOR button will let you check activity on your current channel before transmitting. This could also be used to adjust the volume level of the radio when it is not receiving a signal. Press the MONITOR button again to get out of MONITOR mode. SCAN Your XT511 Series can scan all 22 channels for any activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel. Your radio will stay on the active channel as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the button. CALL ALERT Your XT511 Series can transmit a call alert for a fixed length of time. To send a call alert, press the CALL/LOCK button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation. The XT511 has 5 call alert selections. Page 10 www.midlandradio.com Model XT511 Series ® KEYPAD LOCK To avoid accidentally changing the radio setting, press and hold the CALL/LOCK button for about 4 seconds. The KEY LOCK icon will appear on the display. The PTT, CALL, and MONITOR function will still be active. Repeat the same procedure to unlock the keypad. DISPLAY ILLUMINATION During Power on, the display illumination will activate for approx. 5 seconds. The display illumination can also be activated when the MENU, SCAN button is pressed. It can also be activated if the TUNING knob is turned. Note: In WATCH Mode (Power Off) the display illumination can be activated by pressing any button, or when the TUNING knob is turned. SETTING PRIVACY CODES Your XT511 Series has 121 Privacy Codes available. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button once, and then turn the TUNING knob to select one of the 38 CTCSS Privacy Code. Press again the MENU button and turn the TUNING knob to select one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. Note : If you select any CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two XT511 Series radios, all radios in your group must be set to the same channel and Privacy Code selections. TRANSMIT (TX) POWER LEVEL SELECTION Your XT511 Series has 2 power level settings. To select the power level on channels 1~7 and 15~22, press the MENU button until a “Pr” icon will appear on the display. Then turn the TUNING knob to select TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the PTT button or press MENU button again to move to the next feature setting. When the Battery Meter drops to 1 bar , the TX Power will automatically switch from Hi(H) to Lo(L) level. Page 11 www.midlandradio.com Model XT511 Series ® Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations. VOX (Hands-free Transmission) Your radio has 3 VOX level settings: (oF/1/2/3). To set VOX, press the MENU button until the display shows “Vo” while on the right, an “oF” icon appears. Select “1”, “2”, or “3” by turning the TUNING knob and push the PTT key, or press MENU button again to move to the next feature setting. VOX will be more sensitive on the “1” setting than on the “3” setting. To turn VOX off, press the MENU button until the display shows “Vo” while on the right, a “1”, “2” or “3” icon appears. Select “oF” by turning the TUNING knob and push the PTT key, or press MENU button again to move to the next feature setting. CALL ALERT SELECTION Your XT511 Series has 5 selectable CALL ALERTS (oF/1~5). To select, press the MENU button until a “CA” icon appears and to the right of the “CA” icon the current CALL ALERT setting is displayed. Then turn the TUNING knob to make the CALL ALERT selections - the radio will emit a corresponding tone for each selection. To confirm, press the PTT button or press MENU button to move to the next feature setting. Note : Setting the CALL Alert to “oF” will disable the CALL Alert function. ROGER BEEP (end of transmission) TONE When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished. To turn the ROGER BEEP tone on, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “oF” icon appears. Select “on” by turning the TUNING knob and push the PTT key, or press MENU button to move to the next feature setting. The ROGER BEEP icon will appear on the display. To turn the ROGER BEEP tone off, press the MENU button until the display shows an “rb” icon while on the right of the “rb” display, an “on” icon appears. Select “oF” by turning the TUNING knob and push the PTT key, or press MENU button to move to the next feature setting. The ROGER BEEP icon will disappear on the display. Page 12 www.midlandradio.com Model XT511 Series ® SILENT OPERATION Your XT511 Series has a SILENT OPERATION mode. In this mode, all “beeps” and “tones” are disabled. To turn the SILENT OPERATION mode on, press the MENU button until the display shows an “bP” icon while on the right of the “bP” display, an “on” icon appears. Select “oF” by turning the TUNING knob and push the PTT key or MENU button. The KEY TONE icon will appear on the display. To turn the SILENT OPERATION mode off, press the MENU button until the display shows an “bP” icon while on the right of the “bP” display, an “oF” icon appears. Select “on” by turning the TUNING knob and push the PTT key or MENU button. The KEY TONE icon will disappear on the display. DUAL WATCH Your XT511 Series has a DUAL WATCH function, to enable user to monitor 2 selected channel/privacy code for any activity. It is similar with the SCAN function but will only monitor 2 channels instead of the whole 22 channels. The first channel/privacy code is the current setting, the second channel/privacy code is the one you will set on the MENU. To turn on the DUAL WATCH function, press the MENU button until the DUAL WATCH icon appear while in the right an “oF” icon appears. Select the second channel by turning the TUNING knob.To select a Privacy Code for the second channel press the MENU button once, and then turn the TUNING knob to select one of the 38 CTCSS Privacy Code or press again the MENU button and turn the TUNING knob to select one of the 83 DCS Privacy Code. Press the MENU or PTT button to confirm. The DUAL WATCH icon will remain on the display. The radio will rapidly scan the two channels selected and stop on any active channel. Your radio will stay on the active channel as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present. To turn off the DUAL WATCH function, press the SCAN button. The current GMRS/FRS radio setting will be displayed and the DUAL WATCH icon will disappear on the display. Page 13 www.midlandradio.com Model XT511 Series ® SETTING THE RADIO TO NOAA WEATHER RADIO MODE To set the XT511 to NOAA WEATHER RADIO mode, move the BAND switch in WX position. The LCD will show the current WX channel setting, and the NOAA WEATHER (WX) BAND icon will appear on the display. Turn the TUNING knob to select one of the 7 NOAA WEATHER (WX) BAND channels. NOAA WEATHER ALERT Your XT511 has a NOAA WEATHER ALERT function, to enable you to automatically receive weather alert from designated NOAA stations. To turn the NOAA WEATHER (WX) ALERT on, press the MENU button once while in WX Band. The NOAA WEATHER (WX) ALERT icon will appear on the display while on the right an "oF" icon appears. Select "on" by turning the TUNING knob. To confirm, press the PTT or the MENU button. The radio will return to WX BAND and the NOAA WEATHER (WX) ALERT icon will remain on the display. If the radio receives a WX ALERT signal from a designated NOAA station while on WX mode, the radio will beep for 20 seconds while an "AL" and "In" icon appear on the display while the FLASHLIGHT and the display illumination will blink altogether. Afterwhich the radio will automatically go to NOAA WEATHER RADIO mode. If the radio receives a WX ALERT signal from a designated NOAA station while on AM/FM or GMRS/FRS mode, the radio will beep for 20 seconds while the NOAA WEATHER (WX) ALERT icon will appear blinking on the display while the FLASHLIGHT and the display illumination will blink altogether. In this case, the user should set the BAND switch to WX position to listen for any weather alert broadcast. The NOAA WEATHER (WX) ALERT icon will remain blinking on the display when it receives a WX ALERT signal unless the BAND switch is set to WX mode or any button is pressed. This is to remind the user that a WX Alert signal have been received in case they missed it. To turn the NOAA WEATHER (WX) ALERT off, press the MENU button once while in WX Band. The NOAA WEATHER (WX) ALERT icon will appear on the display while on the right an "oF" icon appears. Select "oF" by turning the TUNING knob. To confirm, press the PTT or MENU button. Page 14 www.midlandradio.com Model XT511 Series ® SETTING THE RADIO TO AM/FM RECEIVER MODE To set the XT511 to AM/FM RECEIVER mode, move the BAND switch in AM or FM position. The LCD will show the current AM or FM channel setting. CHANNEL SELECTION (AM/FM BAND) Turn the TUNING knob clockwise or counter-clockwise to select the AM or FM frequency. Turning and holding the TUNING knob will make the radio scan for the frequency continuously until it receives a strong signal. SETTING THE RADIO TO WATCH MODE To set the XT511 to WATCH mode, just turn the POWER/VOLUME switch to OFF. The display will show the current time setting. CHANGING THE HOUR SETTING To change the hour setting of the watch, press the LOCK/CALL/HOUR button while in WATCH mode, and the hour digit of the watch will blink. Turn the TUNING knob to change the hour setting. Press the PTT/SELECT button to confirm. CHANGING THE MINUTE SETTING To change the minute setting of the watch, press the SCAN/MINUTE button while in WATCH mode, and the minute digit of the watch will blink. Turn the TUNING knob to change the hour setting. Press the PTT/SELECT button to confirm. SETTING THE ALARM CLOCK To XT511 can also function as an ALARM CLOCK. To turn the ALARM CLOCK on, press the ALARM ON/OFF button while in WATCH mode. The ALARM CLOCK icon will appear. To set the hour setting of the ALARM, press the LOCK/CALL/HOUR button while in WATCH mode, and the hour digit of the watch will blink. Turn the TUNING knob to change the hour setting. Press the PTT/SELECT button to confirm. To set the minute setting of the ALARM, press the SCAN/MINUTE button while in WATCH mode, and the minute digit of the watch will blink. Turn the TUNING knob to change the minute setting. Press the PTT/SELECT button to confirm. To turn the ALARM CLOCK off, press the ALARM ON/OFF button while in WATCH mode. The ALARM CLOCK icon will disappear. Page 15 www.midlandradio.com Model XT511 Series ® USING THE FLASHLIGHT Your XT511 Series has a built-in FLASHLIGHT. To turn the FLASHLIGHT on, set the LIGHT switch to ON. To turn the FLASHLIGHT off, set the LIGHT switch to OFF. EXTERNAL SPEAKER/MICROPHONE JACK Your XT511 Series can be used with an optional external speaker/ microphone or headset, freeing your hands for other tasks. You can also use the HAND MIC thru the SPEAKER/MICROPHONE JACK. To use an optional speaker/microphone or headset: l Open the SPEAKER/MIC Jack Rubber Cap on the side radio. l Insert the plug(s) into the SPK/MIC jacks. l Place the earbud into your ear, and adjust the mic into your desired position. USB JACK Your XT511 Series can be used to charge a mobile phone by the CRANK DYNAMO thru the USB Jack. l Open the USB Jack Rubber Cap on the side radio. l Attach a USB Charging Cable to the mobile phone. l Connect the other end of the USB Charging Cable to the USB Jack of the XT511. l Recharge the mobile phone battery by turning rapidly the CRANK DYNAMO. Page 16 www.midlandradio.com Model XT511 Series ® TROUBLESHOOTING GUIDE No Power - Check battery installation and/or replace batteries Cannot Receive Messages - Confirm the radios have the same channel and Privacy Code settings. - Make sure that you are within range of the other transceivers. - Buildings and other structures may interfere with your communication. (See ABOUT RANGE on Page 9) Radio is not responding to - Make sure key lock is not on. See "Keypad Lock" button presses (Page 10). - Radio might need to be reset. Turn radio off then on. - Ensure accessory microphone is set properly Display is dim - Recharge or replace batteries. Charger not functioning - Ensure that the Charger Plug is installed in the radio properly. - Ensure the outlet where the charger is plugged into is functioning properly. - Check that the battery pack is installed in the radio properly. USE AND CARE 1. Use a soft damp cloth to clean the radio 2. Do not use alcohol or cleaning solutions to clean the radio. 3. Do not immerse the radio in water. 4. Dry the radio with dry lint-free cloth should it get wet. 5. Turn off the radio and remove the batteries during long-term storage. If you have a problem which you believe requires service, please call first and speak with a service technician. Many problems can be remedied over the phone without returning the unit for service. Page 17 www.midlandradio.com Model XT511 Series ® SPECIFICATIONS Channels 22 GMRS/FRS Channels +121 Privacy Codes 10 NOAA Weather (WX) Band Channels Transmitter Power GMRS Hi: 1.08W / Low: 0.26W FRS: 0.26W Operating Frequency UHF 462.5500 ~ 467.7125 MHz Power Source 4 AA Alkaline or 6.0V Rechargeable Ni-MH battery pack GMRS/FRS FREQUENCY CHART (MHz) CH. No CH. Freq. 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 CH. No 10 11 12 13 14 15 16 CH. Freq. 467.5875 467.6125 467.6375 467.6625 467.6875 467.7125 462.5500 462.5750 CH. No 17 18 19 20 21 22 CH. Freq. 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 * Channels 8~14 are low-power FRS license free channels NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz) CH. No CH. Freq. 162.550 162.400 162.475 162.425 162.450 CH. No 10 CH. Freq. 162.500 162.525 161.650 161.775 163.275 PRIVACY CODES FREQUENCY CHART (Hz) Code Freq. 67.0 71.9 74.4 77.0 79.7 82.5 85.4 88.5 Code 10 11 12 13 14 15 16 Freq. 91.5 94.8 97.4 100.0 103.5 107.2 110.9 114.8 Code 17 18 19 20 21 22 23 24 Freq. 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 Code 25 26 27 28 29 30 31 32 Freq. 156.7 162.2 167.9 173.8 179.9 186.2 192.8 203.5 Code 33 34 35 36 37 38 Freq. 210.7 218.1 225.7 233.6 241.8 250.3 Note: Privacy codes can be programmed for use on any channel Page 18 www.midlandradio.com Model XT511 Series ® DCS PRIVACY CODE CHART No. CODE No. CODE No. CODE 023 29 174 57 445 025 30 205 58 464 026 31 223 59 465 031 32 226 60 466 032 33 243 61 503 043 34 244 62 506 047 35 245 63 516 051 36 251 64 532 054 37 261 65 546 10 065 38 263 66 565 11 071 39 265 67 606 12 072 40 271 68 612 13 073 41 306 69 624 14 074 42 311 70 627 15 114 43 315 71 631 16 115 44 331 72 632 17 116 45 343 73 654 18 125 46 346 74 662 19 131 47 351 75 664 20 132 48 364 76 703 21 134 49 365 77 712 22 143 50 371 78 723 23 152 51 411 79 731 24 155 52 412 80 732 25 156 53 413 81 734 26 162 54 423 82 743 27 165 55 431 83 754 28 172 56 432 Note: Privacy codes can be programmed for use on any channel Page 19 www.midlandradio.com Model XT511 Series ® LIMITED WARRANTY Midland Radio Corporation will repair or replace, at its option without charge, any Midland FRS/GMRS transceiver which fails due to a defect in material or workmanship within Three Years following the initial consumer purchase. This warranty does not apply to water damage, battery leak or abuse. Accessories have a 90 day warranty from date of purchase, including any antennas, chargers, or earphones. This warranty does not include the cost of labor for removal or re-installation of the product in a vehicle or other mounting. Performance of any obligation under this warranty may be obtained by returning the warranted product, prepaid freight, along with proof of purchase to: Midland Radio Corporation Warranty Service Department 5900 Parretta Drive Kansas City, MO 64120 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Note : The above warranty applies only to merchandise purchased in the United States of America or any of the territories or possessions thereof, or from a U.S. Military exchange. Midland Radio Corporation 5900 Parretta Drive Kansas City, MO 64120 Tel: (816) 241-8500 E-mail: mail@midlandradio.com URL: www.midlandradio.com Page 20 www.midlandradio.com Model XT511 Series ® ACCESSORIES Accessories can be purchased at www.midlandradio.com or fill in the form on the following page and mail it to our address. AVP-7 - 2 Rechargeable battery packs - $19.99 Page 21 www.midlandradio.com Model XT511 Series ® AVP-1 - 2 Over the Ear Mic. Headsets w/ PTT - $19.99 AVP-H H1 - 1 Open Face Helmet Microphone Kit - $49.99 AVP-H H2 - 1 Closed Face Helmet Microphone Kit - $49.99 Page 22 www.midlandradio.com Model XT511 Series ® AVP-H H3 - 2 Surveillance Headset - $39.99 AVP-H H4 - 2 Ear Wrap Headset - $39.99 AVP-H H5 - 2 Behind the Head Headset - $39.99 Page 23 www.midlandradio.com Model XT511 Series ® ACCESSORIES ORDER FORM Please send Money Order or fill in Visa/MasterCard information and mail to the address below. Please DO NOT send cash or checks. Make Money Order to Midland Radio Corporation. Name: _____________________________________________________ Address: ___________________________________________________ City: _____________________ State _____Zip Code _____________ Tel: ______________________ email: ___________________________ CC# _____________________ Type: __________ Exp. ____________ Qty Item Price AVP-7 $19.99 AVP-1 $19.99 AVP-H1 $49.99 AVP-H2 $49.99 AVP-H3 $39.99 AVP-H4 $39.99 AVP-H5 $39.99 Total Sub-Total Tax (MO, CO, IL, FL only) S&H (Applies to Domestic U.S. only. For Hawaii, Alaska, and Puerto Rico S&H will be $36.25 for 1lb and $64.25 for 2lbs or more). ___________ ___________ _____ $14.95 Total $___________ Page 24 Mail To: Midland Radio Corporation Consumer Dept. 5900 Parretta Drive Kansas City, MO 64120 ---------------Or Call 816.241.8500. ---------------To order online go to www.midlandradio.com www.midlandradio.com MIDLAND RADIO CORPORATION 5900 Parretta Drive Kansas City, MO 64120 Call 816.241.8500 visit us at http://www.midlandradio.com Note: Features & Specifications are subject to change without notice. MIDLAND is not responsible for unintentional errors or omissions on its packaging.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:06:05 21:07:59+08:00 Create Date : 2007:06:05 21:07:59+08:00 Format : application/pdf Title : XT511 Manual (RevA).qxp Creator : Presario Document ID : uuid:e80fe7f7-d24a-48be-b91d-05697a027dda Instance ID : uuid:3ec32477-47f6-4fee-baf9-6fe6c7351f5e Page Count : 24 Author : PresarioEXIF Metadata provided by EXIF.tools