Midland Radio XT511A GMRS / FRS User Manual XT511 Manual Rev F1 Layout 1
Midland Radio Corporation GMRS / FRS XT511 Manual Rev F1 Layout 1
Contents
- 1. User Manual
- 2. XT511-Manual
User Manual
Model XT511A Series TABLE OF CONTENTS Welcome to the World of Midland Features FCC Notice LCD Display Controls Battery Installation Installing the Shoulder Strap Charging the Battery Pack Battery Level Indicator Selecting the Power Source Operating Your Radio Setting the Radio to GMRS/FRS Mode Power On/Off and Volume Transmitting and Receiving a Call About Range MENU Mode Functions XT511A MENU Mode Quick Reference Chart Channel Selection (GMRS/FRS Band) Monitor Scan Call Alert SOS Siren Keypad Lock Display Illumination Setting Privacy Codes Transmit (TX) Power Level Selection VOX (Hands-free Transmission) Silent Operation Roger Beep (End of Transmission) Tone Call Alert Selection Dual Watch NOAA Weather Radio / Scan NOAA Weather Alert 10 11 11 11 11 11 11 12 12 12 13 13 13 13 13 14 14 14 14 15 15 15 16 16 17 17 Page 3 midlandusa.com Model XT511A Series Setting the Radio to AM/FM Receiver Mode Channel Selection (AM/FM Band) Setting the Radio to Clock Mode Changing the Hour Setting Changing the Minute Setting Setting the Alarm Clock Alarm Clock Snooze Using the Flashlight External Speaker/Microphone Jack USB Jack Troubleshooting Guide Use and Care Specifications GMRS/FRS Frequency Chart NOAA Weather (WX) Radio Frequency Chart CTCSS Privacy Codes Frequency Chart DCS Privacy Codes Frequency Chart Limited Warranty (United States and Canada) Accessories MIDLAND Products ISED Notice FVIN Information Page 4 18 18 18 19 19 19 19 20 20 20 21 21 22 22 22 23 23 24 25 26 26 26 midlandusa.com Model XT511A Series Welcome to the world of Midland electronics Congratulations on the purchase of your high quality MIDLAND product. Your two-way radio represents state-of-the-art high-tech engineering and is designed for GMRS (General Mobile Radio Service) operation. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two-way radio is designed for reliable and trouble-free performance for years to come. Features - 22 GMRS/FRS Channels - 121 Privacy Codes (38 CTCSS / 83 DCS) - AM/FM Receiver - VOX - Selectable Call Alerts - NOAA Weather Scan - NOAA Weather Radio - NOAA Weather Alert - Scan Function - Monitor Function - Roger Beep Tone - Silent Operation - Key Pad Lock - Power HI/LO Settings - Flashlight - SOS Siren - Clock/Alarm Clock Function - Dynamo Crank Battery Charge Capability - USB Jack (For Mobile Phone Charging) - Speaker/Microphone Jacks - Battery Meter/Battery Low Indicator This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Page 5 midlandusa.com Model XT511A Series IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION (Only Applicable for GMRS Radio Use in the United States) The XT511A operate on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the GMRS channels of the radios. Serious penalties could result from unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Acts Sections 501 and 502 (amended). You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of your transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www.fcc.gov and request form 605. Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy: - United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J - American National Standards Institute (ANSI)/Institute of Electrical & Electronic Engineers (IEEE) C95. 1-1992 - Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition - National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 - International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. Body-Worn Operation If you wear the radio on your body when transmitting always use Midlandsupplied or approved belt clip, holster, case, or body harness for this product. Use of any accessories not supplied or approved by Midland may exceed FCC/Health Canada RF exposure guidelines. If you do not use any accessories supplied or approved by Midland, ensure the radio and its antenna are at least 1 inch (2.5cm) from your body when transmitting. Page 6 midlandusa.com Model XT511A Series LCD DISPLAY 10 11 12 13 14 15 16 17 1. NOAA WEATHER (WX) ALERT ICON – Indicates the NOAA Weather Alert function is on. 2. TRANSMIT (TX) ICON – Indicates radio is transmitting a signal. 3. RECEIVE (RX) ICON – Indicates radio is receiving a transmission. 4. DUAL WATCH ICON – Indicates the Dual Watch function is on. 5. TRANSMIT POWER LEVEL ICON – Indicates TX Power setting (H/L) 6. CLOCK AM/PM ICON – Indicates the clock is set in AM or PM. 7. CHANNEL NUMBER – Changes from 1~22 on GMRS/FRS band (1~10 on WX band). This is also used to indicate in part the current AM/FM receiver frequency setting and the current clock setting. 8. AM/FM RECEIVER ICON – Indicates radio is in AM or FM receiver mode. 9. PRIVACY CODE – Indicates Privacy Code selected by user (oF~38/oF~83). This 2 digit readout is also used to display AM/ FM receiver frequency and for the clock function. Page 7 18 10. VOX ICON – Indicates when VOX mode is active. 11. KEY LOCK ICON – Indicates KEY LOCK mode is on. 12. SCAN ICON – Indicates when the radio is in Scan mode. 13. KEY TONE ICON – Indicates radio’s Key Beep Tone is on. 14. BATTERY METER – Indicates the battery level. 15. ROGER BEEP ICON – Indicates radio’s Roger Beep Tone is on. 16. ALARM CLOCK ICON – Indicates when the Alarm Clock is on. 17. NOAA WEATHER (WX) BAND ICON– Indicates when the radio is in Weather Band mode. 18. PRIVACY CODE ICON – Indicates Privacy Code setting (CTCSS/DCS). midlandusa.com Model XT511A Series CONTROLS 19 28 29 20 30 21 31 22 32 23 33 24 NOAA’s National Weather Service 34 25 35 26 36 27 19. ANTENNA 20. MONITOR / ALARM ON/OFF Button – Press to turn on the Monitor function in GMRS mode. Press and hold to turn alarm on/off in Clock mode. 21. SCAN/MINUTE Button – Press to set the Scan mode on/off in GMRS mode. Press to change the Minute setting in Clock mode. 22. LOCK/CALL / HOUR Button – Press and hold to set the key pad lock on/off in GMRS mode. Press to send a CALL Alert signal in GMRS mode. Press to change the Hour setting in Clock mode. 23. FLASHLIGHT – Built-in flashlight. 24. USB JACK – used for charging mobile phone thru the Dynamo Crank. 25. EXTERNAL SPEAKER/MIC JACK 26. EXTERNAL CHARGER JACK – When using the AC or DC Adapter the rechargeable battery pack MUST be installed. 27. SPEAKER – Built-in speaker. 28. MENU Button – Press to access Menu mode in GMRS/FRS and WX mode. Press and hold for 5 seconds to activate the SOS Siren. 29. PTT/SELECT/SNOOZE Button – Press and hold to transmit voice communication in GMRS mode. Page 8 37 Press to confirm the selection in MENU and Clock mode. Press to activate SNOOZE function in Clock mode. 30. DYNAMO CRANK HANDLE – Rotate clockwise or counter-clockwise to charge the NiMH battery pack. 31. BAND SWITCH – used to switch between AM/FM/WX/GMRS mode. 32. TUNING KNOB – Rotate clockwise/ counter-clockwise to make adjustment in the MENU mode. It can also make adjusment in the Clock and AM/FM receiver mode. 33. BATTERY SOURCE SWITCH – used to switch between Alkaline and Rechargeable NiMH batteries. 34. LIGHT ON/OFF SWITCH – used to turn the FLASHLIGHT on/off. 35. TONE CONTROL KNOB – Turn clockwise or counter-clockwise to increase or decrease the tone. 36. POWER/VOLUME KNOB – Turn clockwise to turn the power on and increase the volume level. Turn counter-clockwise to decrease the volume level and turn the power off. 37. MIC – Built-in microphone. midlandusa.com Model XT511A Series BATTERY INSTALLATION Your radio operates with either 4 AA alkaline batteries or a NiMH battery pack. Please ensure the rechargeable NiMH battery pack is installed in the radio before using the AC or DC adapters. To install the batteries: 1. With the back of the radio facing you, remove the Battery Cover by pressing down the Battery Cover Lock Tab until it unlocks and lifting it out from the radio. 2. Insert 4 AA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit. Also install the NiMH battery pack as shown below. 3. Return the Battery Cover by pushing it down into the back of the radio until the Battery Cover Lock Tab locks into place. Battery Compartment Alkaline Batteries Battery Cover Lock Tab Battery Cover NiMH Battery Pack INSTALLING THE SHOULDER STRAP To install the SHOULDER STRAP, slide the SHOULDER STRAP CLIP down into the metal pins on the top of the radio until it locks into place. To remove the SHOULDER STRAP, press the SHOULDER STRAP CLIP tab down, then remove it from the radio. Page 9 midlandusa.com Model XT511A Series Shoulder Strap Shoulder Strap Clip Metal Pin Shoulder Strap Clip Metal Pin CHARGING THE BATTERY PACK Your radio is equipped for using a rechargeable NiMH battery pack which can be recharged using an AC wall adapter (included) or a DC adapter (included). Initial charge time is 24 hours with a charge time of 12 hours thereafter. For maximum battery life, we recommend charging the battery pack when the low battery icon comes on. Remove the radio from the charger when the charge time expires. For the location of the CHARGING JACK see page 20. In order to ensure that the battery pack is fully charged, it is recommended that the battery pack be charged for at least 12 hours with the radio turned OFF. You can also charge the rechargeable NiMH battery pack using the Dynamo Crank. To charge using the Dynamo Crank rotate rapidly the Dynamo Crank handle clockwise or counter-clockwise. To get the best charging condition, charge the battery pack thru the Dynamo Crank with the radio turned OFF. Speed and length of time of cranking will determine the charge of the NiMH Battery Pack. Two minutes of cranking gives up to 5 minutes of radio use time (receiving and monitoring only). 1. Only use our NiMH battery pack. 2. Do not attempt to charge alkaline batteries or any batteries or battery packs other than the one indicated in the manual. This may cause leakage and damage to the radio. 3. For long term storage of the radio, turn the radio OFF and remove the batteries from the radio. Page 10 midlandusa.com Model XT511A Series BATTERY LEVEL INDICATOR Your radio has a BATTERY LEVEL METER that shows the battery power level. The greater the number of bars visible, the stronger the battery level. When the battery level is low, the Battery Shell icon will flash in the display indicating your batteries should be replaced or recharged if using a rechargeable battery pack. SELECTING THE POWER SOURCE Your radio can use either an Alkaline battery or the rechargeable NiMH battery pack. Just set the BATTERY SOURCE switch to either “Alkaline” or “Rechargeable” (for NiMH battery pack) mode. OPERATING YOUR RADIO POWER ON/OFF AND VOLUME Rotate the POWER/VOLUME knob clockwise to turn the radio on and increase the volume level. Rotate the control counter-clockwise to reduce the volume level and to turn the radio off. During Power On, the LCD will display all icons for 1 second and the LCD display will indicate the last channel/frequency selected. SETTING THE RADIO TO GMRS/FRS MODE To set your radio to GMRS/FRS mode, move the BAND switch in GMRS/FRS position. The LCD will show the current GMRS/FRS channel setting. TRANSMITTING AND RECEIVING A CALL To communicate, all radios in your group must be set to the same channel and Privacy Code. 1. Press and hold the PTT button and speak in a normal voice into the microphone. The TX icon will appear continuously on the LCD Display while transmitting. When using a HAND MIC, press and hold the PTT button on the side of the HAND MIC and speak in a normal voice. For maximum clarity, hold the HAND MIC 2 to 3 inches from your mouth. Page 11 midlandusa.com Model XT511A Series 2. To receive a call, release the PTT button. The RX icon will appear on the display when your radio is receiving a transmission. ABOUT RANGE Your XT511A Series radios are designed to give you maximum range under optimum conditions. Optimum Conditions are: l Over water l Open rural areas without obstructions l Flat areas where you can see the other person To ensure you get maximum range: l Be sure to use fresh or fully charged batteries - low batteries will cause low power conditions l Be sure you are on a GMRS channel - FRS channels are restricted by the FCC to low power l Be sure to set your radio to use Hi power. l Be sure to point the ANTENNA upward. MENU MODE FUNCTIONS XT511A MENU MODE QUICK REFERENCE CHART MENU Privacy Power oF/CTCSS/DCS H/L WX Scan WX Channel VOX Silent Operation Roger Beep Call Alert oF/1~9 On/Off On/Off 1~10 WX Alert CTCSS DCS 1~10 1~10 1~38 1~83 On/Off Hour Setting Minute Setting Alarm Hour Setting Alarm Minute Setting 12hr AM/PM 0~59 12hr AM/PM 0~59 MENU SOS Dual Watch Privacy oF/1~22 oF/CTCSS/DCS Press and hold the MENU button for 5 seconds CTCSS 1~38 DCS 1~83 Only when Dual Watch is ON Clock/Alarm Clock Function Page 12 midlandusa.com Model XT511A Series CHANNEL SELECTION (GMRS/FRS BAND) Turn the TUNING knob clockwise or counter-clockwise to select one of the 22 GMRS/FRS channels. MONITOR Pressing the MONITOR button will let you check activity on your current channel before transmitting. This could also be used to adjust the volume level of the radio when it is not receiving a signal. Press the MONITOR button again to get out of MONITOR mode. SCAN Your radio can scan all 22 channels for any activity. To enter, press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel. Your radio will stay on the active channel as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present. When you press the PTT button to transmit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, press the SCAN button. CALL ALERT Your radio can transmit a call alert for a fixed length of time. To send a call alert, press the CALL/LOCK button. The TX icon will appear while transmitting a call alert and a tone can be heard on the speaker for confirmation. Your radio has 10 call alert selections. SOS SIREN To activate the SOS SIREN function, press and hold the MENU button for 5 seconds. The radio will send out a loud siren sound, the display backlight will flash and the flaslight will flash; spelling out a S.O.S. pattern in Morse Code and a “Sos” icon will appear on the display. To deactivate the SOS SIREN function press the PTT button twice. Press the PTT button twice to stop the SOS SIREN function. Warning: The SOS Siren is to be used only in the event of an emergency. Midland Radio Corporation is not responsible if there is no response to the SOS Siren. Page 13 midlandusa.com Model XT511A Series KEYPAD LOCK To avoid accidentally changing the radio setting, press and hold the CALL/LOCK button for about 4 seconds. The LOCK icon will appear on the display. The PTT, CALL, and MONITOR function will still be active. Repeat the same procedure to unlock the keypad. DISPLAY ILLUMINATION During Power on, the display illumination will activate for approx. 5 seconds. The display illumination can also be activated when the MENU, SCAN, or MONITOR button is pressed. It can also be activated if the TUNING knob is turned. Note: In Clock Mode (Power Off) the display illumination can be activated by pressing any button or when the Tuning knob is turned. SETTING PRIVACY CODES Your radio has 121 Privacy Codes available. The selected Privacy Code may be different for each channel. To select a Privacy Code for the current channel press the MENU button once, and then turn the TUNING knob to select between oF/CTCSS/DCS. Then press again the MENU button, and then turn the TUNING knob to select one of the 38 CTCSS Privacy Code or one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. Note : If you select any CTCSS Privacy Code, any pre-selected DCS Privacy Code will be cancelled and vice-versa. Selecting a Privacy Code of "oF" will disable the Privacy feature. To communicate between two XT511A Series radios, all radios in your group must be set to the same channel and Privacy Code selections. TRANSMIT (TX) POWER LEVEL SELECTION Your radio has 2 power level settings. To select the power level on channels 1~7 and 15~22, press the MENU button until a “Pr” icon will appear on the display. Then turn the TUNING knob to select TRANSMIT POWER LEVEL (H: Hi or L: Lo). To confirm, press the PTT button or press MENU button again to move to the next feature setting. Page 14 midlandusa.com Model XT511A Series When the Battery Meter drops to 1 bar , the TX Power will automatically switch from Hi(H) to Lo(L) level. Note : You cannot adjust the power setting on the FRS channels (8~14). They are set to Low power per FCC regulations. VOX (Hands-free Transmission) Your radio has 9 VOX level settings: (oF/1~9). To turn the VOX on, press the MENU button until a “Vo” appears, while on the right, the “oF” setting appears. Turn the TUNING knob to make the VOX setting selections. To confirm, push the PTT key or press the MENU button again to move to the next feature setting. VOX will be more sensitive on the “1” setting than on the “9” setting. To turn the VOX off, press the MENU button until a “Vo” appears, while on the right, the current VOX setting appears. Select “oF” by turning the TUNING knob. To confirm, push the PTT key or press the MENU button again to move to the next feature setting. Note: For VOX Hands-free operation use Midland headset accessories or built-in internal microphone. The accessory hand mic is also intended for VOX mode use. SILENT OPERATION Your radio has a SILENT OPERATION mode. In this mode, all “beeps” and “tones” are disabled. To set the SILENT OPERATION, press the MENU button until the display shows a “bP” icon. Select “on” or “oF” by turning the TUNING knob. To confirm, push the PTT key or press MENU button to move to the next feature setting. When the SILENT OPERATION is off, the icon will appear on the display. ROGER BEEP (End of Transmission) TONE When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished. To set the ROGER BEEP tone, press the MENU button until the display shows an “rb” icon. Select “on” or “oF” by turning the TUNING knob. Page 15 midlandusa.com Model XT511A Series To confirm, push the PTT key or press the MENU button to move to the next feature setting. When the ROGER BEEP tone is on, the RGB icon will appear on the display. CALL ALERT SELECTION Your radio has 10 selectable CALL ALERTS (1~10). To select, press the MENU button until a “CA” icon appears and to the right of the “CA” icon the current CALL ALERT setting is displayed. Then turn the TUNING knob to make the CALL ALERT selections - the radio will emit a corresponding tone for each selection. To confirm, press the PTT button or press MENU button to move to the next feature setting. DUAL WATCH Your radio has a DUAL WATCH function, to enable user to scan 2 channels for any activity. The first channel will be the current channel/privacy code setting and the second channel will be the selected channel on the MENU. To turn on the DUAL WATCH function, press the MENU button until the display shows the DW icon and “oF” icon. Select the second channel by turning the TUNING knob. To select a Privacy Code for the current channel press the MENU button once, and then turn the TUNING knob to select between oF/CTCSS/DCS. Then press again the MENU button, and then turn the TUNING knob to select one of the 38 CTCSS Privacy Code or one of the 83 DCS Privacy Code. The Privacy Code icon on the display will indicate whether you set your Privacy Code in CTCSS or DCS mode. To confirm the selection, press the PTT button or press MENU button again to move to the next feature setting. The DW icon will remain on the display. The radio will rapidly scan the two channels selected and stop on any active channel. Your radio will stay on the active channel as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present. To turn off the DUAL WATCH function, press the SCAN button. The current GMRS/FRS radio setting will be displayed and the DW icon will disappear on the display. Note: When the radio is in Dual Watch or Scan mode for GMRS, it will be overridden with a weather alert. Page 16 midlandusa.com Model XT511A Series NOAA WEATHER RADIO / SCAN Your radio has a NOAA WEATHER RADIO function, to enable the user to receive weather reports from designated NOAA stations. Your radio also has a NOAA WEATHER SCAN function, to enable the user to scan all 10 channels of the NOAA WEATHER RADIO. To turn the NOAA WEATHER SCAN on, move the BAND switch to WX position. The radio will go to WX Band mode and start scanning all 10 channels and stop on any active channel. The ALERT, SCAN and the icon appears on the display while the radio is scanning. When the channel becomes inactive for 10 seconds the radio will resume scanning. To stop the NOAA WEATHER (WX) SCAN and set the channel manually on the WX Band, press the SCAN button during NOAA WEATHER (WX) SCAN. The radio will stop scanning and stay on the last active WX Band channel. While in WX Band mode press the MENU button and turning the TUNING knob to select one of the 10 NOAA WEATHER (WX) BAND channels. To confirm, press the PTT button or press the MENU button. To resume the NOAA WEATHER (WX) SCAN function, press the SCAN button again. To turn the NOAA WEATHER RADIO off, move the BAND switch from WX position to other position. NOAA WEATHER ALERT Your radio has a NOAA WEATHER ALERT function, to enable you to automatically receive weather alert from designated NOAA stations. The NOAA WEATHER ALERT function is automatically on during NOAA WEATHER SCAN function. To manually turn the NOAA WEATHER (WX) ALERT on, press the MENU button once while in WX Band. The ALERT icon will appear on the display while on the right an "oF" icon appears. Select "on" by turning the TUNING knob. To confirm, press the PTT or the MENU button. The radio will return to WX BAND and the ALERT icon will remain on the display. If the radio receives a WX ALERT signal from a designated NOAA station while on WX mode, the radio will beep for 20 seconds while an "AL" and "In" icon appear on the display while the FLASHLIGHT and the display illumination will blink altogether. Afterwhich the radio will automatically go to NOAA WEATHER RADIO mode. Page 17 midlandusa.com Model XT511A Series If the radio receives a WX ALERT signal from a designated NOAA station while on AM/FM or GMRS/FRS mode, the radio will beep for 20 seconds while the ALERT icon will appear blinking on the display while the FLASHLIGHT and the display illumination will blink altogether. In this case, the user should set the BAND switch to WX position to listen for any weather alert broadcast. The ALERT icon will remain blinking on the display when it receives a WX ALERT signal unless the BAND switch is set to WX mode or any button is pressed. This is to remind the user that a WX Alert signal has been received, in case they missed it. To turn the NOAA WEATHER (WX) ALERT off, press the MENU button once while in WX Band. The ALERT icon will appear on the display while on the right an "on" icon appears. Select "oF" by turning the TUNING knob. To confirm, press the PTT or MENU button. SETTING THE RADIO TO AM/FM RECEIVER MODE To set your radio to AM/FM RECEIVER mode, move the BAND switch in AM or FM position. The LCD will show the current AM or FM channel setting. Note: When switching from Weather or GMRS modes to AM or FM radio, you may notice a delay before the radio tunes into a station. This is normal operation and is not an indication the radio is not working. You may also notice this delay when Powering the Radio ON in AM or FM modes. CHANNEL SELECTION (AM/FM BAND) Turn the TUNING knob clockwise or counter-clockwise to select the AM or FM frequency. Turning and holding the TUNING knob will make the radio scan for the frequency continuously until it receives a strong signal. SETTING THE RADIO TO CLOCK MODE To set your radio to CLOCK mode, just turn the POWER/VOLUME switch to OFF. The display will show the current time setting. Page 18 midlandusa.com Model XT511A Series CHANGING THE HOUR SETTING To change the hour setting of the clock, press the LOCK/CALL/ HOUR button while in CLOCK mode, and the hour digit of the clock will blink. Turn the TUNING knob to change the hour setting. Press the PTT/SELECT button to confirm. Note: The clock of the XT511A uses a 12-hour format, which means the clock will automatically change to AM or PM setting when you scroll at every 12:00 hour mark. CHANGING THE MINUTE SETTING To change the minute setting of the clock, press the SCAN/MINUTE button while in CLOCK mode, and the minute digit of the clock will blink. Turn the TUNING knob to change the minute setting. Press the PTT/SELECT button to confirm. SETTING THE ALARM CLOCK The radio can also function as an ALARM CLOCK. To turn the ALARM CLOCK on, press the ALARM ON/OFF button while in CLOCK mode. The icon will appear. To set the hour setting of the ALARM, press the LOCK/CALL/HOUR button while in CLOCK mode, and the hour digit of the clock will blink. Turn the TUNING knob to change the hour setting. Press the PTT/SELECT button to confirm. To set the minute setting of the ALARM, press the SCAN/MINUTE button while in CLOCK mode, and the minute digit of the clock will blink. Turn the TUNING knob to change the minute setting. Press the PTT/SELECT button to confirm. To turn the ALARM CLOCK off, press the ALARM ON/OFF button while in CLOCK mode. The icon will disappear. ALARM CLOCK SNOOZE When the ALARM CLOCK goes off, you can activate the SNOOZE function by pressing the SNOOZE button. Everytime the SNOOZE button is pressed the ALARM CLOCK will go off again after 8 minutes. Page 19 midlandusa.com Model XT511A Series USING THE FLASHLIGHT Your radio has a built-in FLASHLIGHT. To turn the FLASHLIGHT on, set the LIGHT switch to ON. To turn the FLASHLIGHT off, set the LIGHT switch to OFF. EXTERNAL SPEAKER/MICROPHONE JACK Your radio can be used with an optional external speaker/ microphone or headset, freeing your hands for other tasks. You can also use the HAND MIC thru the SPEAKER/MICROPHONE JACK. To use an optional speaker/microphone or headset: l Open the SPEAKER/MIC Jack Rubber Cap on the side of the radio. l Insert the plug(s) into the SPK/MIC jacks. l Place the earbud into your ear, and adjust the mic into your desired position. Note: When the HAND MIC is connected, all audio will play through the HAND MIC because it is a speaker mic. This is normal operation. USB JACK Your radio can be used to charge a mobile phone by the DYNAMO CRANK, AC, or DC Adapter thru the USB Jack. l Open the USB Jack Rubber Cap on the side of the radio. l Attach a USB Charging Cable (not included) to the mobile phone. l Connect the other end of the USB Charging Cable to the USB Jack of the XT511A. l Recharge the mobile phone battery by turning rapidly the DYNAMO CRANK, or by attaching the AC or DC Adapter in the Charging Jack. Note: Charging a mobile phone thru the USB Jack is intended for emergency purpose only. It is not intended for recharging a fully discharged battery. USB JACK EXTERNAL SPK/MIC JACK CHARGING JACK Page 20 midlandusa.com Model XT511A Series TROUBLESHOOTING GUIDE PROBLEM SOLUTION No Power - Check battery installation and/or replace batteries. Cannot Receive Messages - Confirm the radios have the same channel and Privacy Code settings. - Make sure that you are within range of the other transceivers. - Buildings and other structures may interfere with your communication. (see ABOUT RANGE on Page 12) Radio is not responding - Make sure key lock is not on (See Keypad Lock on to button presses Page 13). - Radio might need to be reset. Turn radio off then on. - Ensure accessory microhone is set properly Display is dim - Recharge or replace batteries. Charger not functioning - Ensure the Charger Plug is installed in the radio properly. - Ensure the outlet where the charger is plugged in is functioning properly. - Check that the battery pack is installed in the radio properly. USE AND CARE 1. Use a soft damp cloth to clean the radio. 2. Do not use alcohol or cleaning solutions to clean the radio. 3. Do not immerse the radio in water. 4. Dry the radio with a dry lint-free cloth should it get wet. 5. Turn off the radio and remove the batteries during long-term storage. If you have a problem which you believe requires service, please call first and speak with a service technician at 816-241-8500. Many problems can be remedied over the phone without returning the unit for service. Page 21 midlandusa.com Model XT511A Series SPECIFICATIONS Channels 22 GMRS/FRS Channels +121 Privacy Codes 10 NOAA Weather (WX) Band Channels Operating Frequency UHF 462.5500 ~ 467.7125 MHz AM : 520kHz ~ 1710kHz - 10kHz steps FM : 87.5MHz ~ 108MHz - 100kHz steps Power Source 4 AA Alkaline or 6.0V Rechargeable NiMH battery pack GMRS/FRS FREQUENCY CHART (MHz) CH. No 10 11 CH. Freq. 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 CH. No 12 13 14 15 16 17 18 19 20 21 22 CH. Freq. 467.6625 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 * Channels 8~14 are low-power FRS license free channels NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz) CH. No CH. Freq. 162.550 162.400 162.475 162.425 162.450 CH. No 10 CH. Freq. 162.500 162.525 161.650 161.775 163.275 * Channels 8, 9 and 10 are designated Canadian Marine Frequencies Page 22 midlandusa.com Model XT511A Series CTCSS CODES FREQUENCY CHART CODE Freq. CODE Freq. CODE Freq. CODE Freq. 67.0 11 97.4 21 136.5 31 192.8 71.9 12 100.0 22 141.3 32 203.5 74.4 13 103.5 23 146.2 33 210.7 77.0 14 107.2 24 151.4 34 218.1 79.7 15 110.9 25 156.7 35 225.7 82.5 16 114.8 26 162.2 36 233.6 85.4 17 118.8 27 167.9 37 241.8 88.5 18 123.0 28 173.8 38 250.3 91.5 19 127.3 29 179.9 10 94.8 20 131.8 30 186.2 DCS PRIVACY CODES FREQUENCY CHART No. CODE No. CODE No. CODE 023 29 174 57 025 30 205 58 464 026 31 223 59 465 031 32 226 60 445 466 032 33 243 61 503 043 34 244 62 506 047 35 245 63 516 051 36 251 64 532 054 37 261 65 546 10 065 38 263 66 565 11 071 39 265 67 606 12 072 40 271 68 612 13 073 41 306 69 624 14 074 42 311 70 627 15 114 43 315 71 631 16 115 44 331 72 632 17 116 45 343 73 654 18 125 46 346 74 662 19 131 47 351 75 664 20 132 48 364 76 703 21 134 49 365 77 712 22 143 50 371 78 723 23 152 51 411 79 731 24 155 52 412 80 732 25 156 53 413 81 734 26 162 54 423 82 743 27 165 55 431 83 754 28 172 56 432 − − IMPORTANT: Changes or modifications to this unit not expressly approved by MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians. Page 23 midlandusa.com Model XT511A Series LIMITED WARRANTY (United States and Canada) Subject to the exclusions set forth below, Midland Radio Corporation will repair or replace, at its option without charge, any Midland FRS/GMRS transceiver which fails due to a defect in material or workmanship within Three Years following the initial consumer purchase. This warranty does not apply to water damage, battery leak, abuse or misuse of unauthorized accessories, unauthorized service or modification or altered products. Accessories have a 90 day warranty from date of purchase, including any chargers, microphones, and cables. This warranty does not include the cost of labor for removal or re-installation of the product in a vehicle or other mounting. ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED AS SET FORTH HEREIN AND TO THE DURATION OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MIDLAND BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING BUT NOT LIMITED TO NEGLIGENCE, GROSS NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE AND DEATH) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. For Product Purchased in the USA: Performance of any obligation under this warranty may be obtained by returning the warranted product, prepaid freight, along with proof of purchase to: Midland Radio Corporation Warranty Service Department 5900 Parretta Drive Kansas City, MO 64120 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. Note: The above warranty applies only to merchandise purchased in the United States of America or any of the territories or possessions thereof, or from a U.S. Military exchange. For Product Purchased in Canada: Performance of any obligation under this warranty may be obtained by returning the warranted product, along with proof of purchase, to your place of purchase in Canada. This warranty gives you specified legal rights. Additional warranty rights may be provided by law in some areas within Canada. Page 24 midlandusa.com Model XT511A Series ACCESSORIES Accessories can be purchased at midlandusa.com. AVP1 AVPH5 - Over the Ear Headsets - Behind the Head Headsets AVP7 AVPH7 - Pair of Ni-MH Rechargeable Battery Packs - Camo Headsets with Boom Mic AVPH2 AVP-H8 - Closed Face Helmet Headset Kit - Acoustic Throat Mic AVPH3 AVPH10 - Surveillance Headsets - Shoulder Speaker Mic AVPH4 - Wrap Around the Ear Headsets Page 25 midlandusa.com Model XT511A Series IMPORTANT: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi même si le brouillage est susceptible d'en compromettre le fonctionnement. FVIN Information: Vxxx. To verify the FVIN, press and hold the SCAN button while the XT511A is powered-off, then rotate the VOLUME Switch to power on the radio. Then the FVIN will be displayed in the LCD for about 2 seconds. Page 26 midlandusa.com MIDLAND RADIO CORPORATION 5900 Parretta Drive Kansas City, MO 64120 Call 816.241.8500 We’d love to hear from you! Let us know what you think of your new Midland product at or by visiting us at midlandusa.com Note: Features & Specifications are subject to change without notice. MIDLAND is not responsible for unintentional errors or omissions on its packaging. Rev F
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : lenovo Title : XT511 Manual (Rev F1)_Layout 1 Create Date : 2017:07:11 09:06:13+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2017:07:11 17:45:15+09:00 Metadata Date : 2017:07:11 17:45:15+09:00 Producer : Acrobat Distiller 10.0.0 (Windows) Document ID : uuid:5aa42a26-0461-4045-9eb0-52efaaa4189e Instance ID : uuid:fd651d1f-12a4-4b6c-985d-e7b8051d3c42 Page Count : 28 Author : lenovoEXIF Metadata provided by EXIF.tools