Midmark 9A408T2 Medical Chair Controller Transmitter User Manual 00x xxxx xx Description Product name

Midmark Corporation Medical Chair Controller Transmitter 00x xxxx xx Description Product name

manual

Download: Midmark 9A408T2 Medical Chair Controller Transmitter User Manual 00x xxxx xx Description Product name
Mirror Download [FCC.gov]Midmark 9A408T2 Medical Chair Controller Transmitter User Manual 00x xxxx xx Description Product name
Document ID2004219
Application IDjGgXMWOrR9OleVWJdR8LPg==
Document Descriptionmanual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.3kB (366224 bits)
Date Submitted2013-06-28 00:00:00
Date Available2013-07-01 00:00:00
Creation Date2017-10-26 20:45:02
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-26 20:45:02
Document Title00x-xxxx-xx - Document Description: Product name
Document CreatorAdobe InDesign CS5.5 (7.5.1)
Document Author: Midmark

This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case
the user will be required to correct the interference at
their own expense.
Any modiications to this product may violate the rules
of the Federal Communications Commission and
make operation of the product unlawful.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
SCOPE OF WARRANTY
Midmark Corporation (“Midmark”) warrants to the original
purchaser its new Alternate Care products and components
(except for components not warranted under “Exclusions”)
manufactured by Midmark to be free from defects in material and
workmanship under normal use and service. Midmark’s
obligation under this warranty is limited to the repair or replacement, at Midmark’s option, of the parts or the products the defects
of which are reported to Midmark within the applicable
warranty period and which, upon examination by Midmark, prove
to be defective.
APPLICABLE WARRANTY PERIOD
The applicable warranty period, measured from the date of
delivery to the original user, shall be one (1) year for all warranted
products and components.
EXCLUSIONS
This warranty does not cover and Midmark shall not be liable for
the following: (1) repairs and replacements because of misuse,
abuse, negligence, alteration, accident, freight damage, or
tampering; (2) products which are not installed, used, and properly cleaned as required in the Midmark “Installation” and or “Installation / Operation Manual” for this applicable product. (3) products
considered to be of a consumable nature; (4) accessories or
parts not manufactured by Midmark; (5) charges by anyone for
adjustments, repairs, replacement parts, installation, or other work
performed upon or in connection with such products which is not
expressly authorized in writing in advance by Midmark.
EXCLUSIVE REMEDY
Midmark’s only obligation under this warranty is the repair or
replacement of defective parts. Midmark shall not be liable for any
direct, special, indirect, incidental, exemplary, or consequential
damages or delay, including, but not limited to, damages for loss
of proits or loss of use.
NO AUTHORIZATION
No person or irm is authorized to create for Midmark any other
obligation or liability in connection with the products.
General Information
Intended Use
This product is intended to control patient positioning
while providing better patient access by eliminating the
cord from the controller(s).
User’s Guide
630 Wireless Controls
9A408 (-009 /-010 /-011 /-012)
Calling for Service
If service is required, contact your Midmark dealer.
To contact Midmark directly:
1-800-MIDMARK (1-800-643-6275)
Monday-Friday 8:00 am until 5:00 pm (EST)
www.midmark.com
IP
FCC Compliance Statement
Limited Warranty
Compliance Information
This guide outlines basic operation of the
wireless hand / foot control and the associated
base station. If service is required, contact your
authorized Midmark dealer.
Dealer (name / phone):
__________________________________
__________________________________
__________________________________
__________________________________
THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND
IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF
ANY KIND INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE,
THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT OF DEFECTIVE PARTS.
Midmark Corporation
60 Vista Drive
Versailles, OH 45380 USA
1-800-643-6275
1-937-526-3662
www.midmark.com
Date of Purchase: __________________
003-2638-00
© Midmark Corporation 2013
Rev * (6/13/13))
TP208 Rev. A
Compliance Information - continued...
IC Compliance Statement
Specifications
Association Procedure:
A) Disconnect power to the table for at least 3 seconds.
B*) Reconnect power, wait for the power up beep sequence from
the table, then press & hold the Stop & Home buttons on the
wireless controller until you hear three “beeps”.
Interference
“This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.”
“Le présent appareil est conforme aux CNR ďIndustrie Canada applicables aux
appareils radio exempts de licence. Ľexploitation est autorisée aux deux conditions
suivantes: (1) ľappareil ne doit pas produire de brouillage, et (2) ľutilisateur de
ľappareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible ďen compromettre le fonctionnement.”
Range of Operation............. 20 ft. (6 m) radius
Batteries:
Hand Control .................................AA (qty. 2)
Foot Control ..................................AA (qty. 2)
* Note: Step B must be performed within 10 seconds of the power up beep
sequence from the table.
C) Check for proper operation of wireless controller.
D) If associating a hand and foot control, repeat procedure using
the other wireless controller.
MA771100i
Antennas
Troubleshooting
“Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.”
Cause:
Low battery
Solution: Replace batteries
“Conformément à la réglementation ďIndustrie Canada, le présent émetteur radio peut
fonctionner avec une antenne ďun type et ďun gain maximal (ou inférieur) approuvé
pour ľémetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à ľintention des autres utilisateurs, il faut choisir le type ďantenne et son
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
ľintensité nécessaire à ľétablissement ďune communication satisfaisante.”
When any control button is pressed,
nothing happens. (No “beeps”, no movement, etc.)
Stop
Home
Association Procedure
When any control button is pressed, that controller
sounds a single “beep”. (All functions operate)
Home
Cause:
Stop
1. Batteries completely dead
2. Wireless controller has lost
“association” to chair
Solution: 1. Replace batteries
2. Perform Association Procedure*
The wireless controller will only function with the chair it has been “associated” with.
This prevents unwanted movement in locations with more than one chair.
Each wireless controller’s association is preset at the factory. This procedure is only
required in the event of a malfunction, if a new controller is purchased, or if you are
attempting to use the controller with a chair other than the one it was originally
associated with.
The wireless controllers will only function with the
chair they have been “associated” with. This prevents
unwanted movement in locations with more than one
chair.
If further service is required,
contact your authorized Midmark dealer.
© Midmark Corporation 2013
TP208 Rev. A
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Midmark
Create Date                     : 2013:06:13 09:44:45-04:00
Modify Date                     : 2013:06:14 13:32:56-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:5a5c7b97-3eba-4eab-9193-3b2fa756a835
Original Document ID            : adobe:docid:indd:8270d2c3-a457-11dd-8b59-aafb4391733a
Document ID                     : adobe:docid:indd:8270d2c3-a457-11dd-8b59-aafb4391733a
Rendition Class                 : proof:pdf
Derived From Instance ID        : 8270d2c2-a457-11dd-8b59-aafb4391733a
Derived From Document ID        : adobe:docid:indd:c97bc6a8-63c8-11dd-ab26-cb0fe4271e5d
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:C1314ED09888E011AFB1A24B3302B307, xmp.iid:C2314ED09888E011AFB1A24B3302B307, xmp.iid:C6314ED09888E011AFB1A24B3302B307, xmp.iid:C7314ED09888E011AFB1A24B3302B307, xmp.iid:D7F95AD522A3E011A77EF6AA192002F9, xmp.iid:D8F95AD522A3E011A77EF6AA192002F9, xmp.iid:3D9D8369BCB6E011B2E8F6D7F50E9139, xmp.iid:3E9D8369BCB6E011B2E8F6D7F50E9139, xmp.iid:777987F7104CE1118F99BC5C289AA99B, xmp.iid:787987F7104CE1118F99BC5C289AA99B, xmp.iid:6F862697304CE111868397848A133F76, xmp.iid:70862697304CE111868397848A133F76, xmp.iid:F9026C2A124DE111B731FFF248EF39CA, xmp.iid:FA026C2A124DE111B731FFF248EF39CA, xmp.iid:5991306A616CE111959DCD510F8D5F1F, xmp.iid:5A91306A616CE111959DCD510F8D5F1F, xmp.iid:F5385EBC1C6DE111980D995FA358A8E9, xmp.iid:F6385EBC1C6DE111980D995FA358A8E9, xmp.iid:AFFF2A7E346DE111B784FA84DE21FE3F, xmp.iid:B5702D7E346DE111B784FA84DE21FE3F, xmp.iid:5103C756CE78E111B71281D383D732D9, xmp.iid:8F10CA56CE78E111B71281D383D732D9, xmp.iid:B3C7AF3F9A85E1119932F39149861102, xmp.iid:B4C7AF3F9A85E1119932F39149861102, xmp.iid:2055D3CA4211E21181E9EA2EAB83BEE8, xmp.iid:2155D3CA4211E21181E9EA2EAB83BEE8, xmp.iid:3D7EC93F0E3FE211AE4BDCCAB5D651FA, xmp.iid:92463E5A0E3FE211AE4BDCCAB5D651FA, xmp.iid:158D7A06D13FE211BF55A13EE0F499F5, xmp.iid:168D7A06D13FE211BF55A13EE0F499F5, xmp.iid:AC38C949E06AE21184D1B82A5CD9F1CB, xmp.iid:AD38C949E06AE21184D1B82A5CD9F1CB, xmp.iid:968F13BDC885E211AEDE9F2BECD0FB5E, xmp.iid:978F13BDC885E211AEDE9F2BECD0FB5E, xmp.iid:7FF942BC6AD3E2119B089CCA8F4E18AE, xmp.iid:80F942BC6AD3E2119B089CCA8F4E18AE, xmp.iid:89F942BC6AD3E2119B089CCA8F4E18AE, xmp.iid:1DA9F03418D4E211A1B2A82A95F90722, xmp.iid:BC5CC42A19D4E211A1B2A82A95F90722, xmp.iid:BD5CC42A19D4E211A1B2A82A95F90722, xmp.iid:BE5CC42A19D4E211A1B2A82A95F90722, xmp.iid:BF5CC42A19D4E211A1B2A82A95F90722, xmp.iid:A437722C1DD4E211A1B2A82A95F90722, xmp.iid:F693C04F1DD4E211A1B2A82A95F90722, xmp.iid:F793C04F1DD4E211A1B2A82A95F90722, xmp.iid:E72D65F228D4E211A1B2A82A95F90722, xmp.iid:BD513D242ED4E211A1B2A82A95F90722, xmp.iid:5F20DC8F2ED4E211A1B2A82A95F90722, xmp.iid:288E915F2FD4E211A061AF1F331FB3E4
History When                    : 2011:05:27 15:37:53-04:00, 2011:05:27 15:37:53-04:00, 2011:05:27 15:38:57-04:00, 2011:05:27 15:38:57-04:00, 2011:06:30 10:13:56-04:00, 2011:06:30 10:13:56-04:00, 2011:07:25 08:48:36-04:00, 2011:07:25 08:48:36-04:00, 2012:01:31 08:50:13-05:00, 2012:01:31 08:50:13-05:00, 2012:01:31 12:25:37-05:00, 2012:01:31 12:25:37-05:00, 2012:02:01 15:20:21-05:00, 2012:02:01 15:20:21-05:00, 2012:03:12 12:35:44-04:00, 2012:03:12 12:35:44-04:00, 2012:03:13 10:56:38-04:00, 2012:03:13 10:56:38-04:00, 2012:03:13 13:46:42-04:00, 2012:03:13 13:46:42-04:00, 2012:03:28 08:05:41-04:00, 2012:03:28 08:05:41-04:00, 2012:04:13 14:55:33-04:00, 2012:04:13 14:55:33-04:00, 2012:10:08 08:22:14-04:00, 2012:10:08 08:22:14-04:00, 2012:12:05 14:02:45-05:00, 2012:12:05 14:02:45-05:00, 2012:12:06 13:16:16-05:00, 2012:12:06 13:16:16-05:00, 2013:01:30 08:23:51-05:00, 2013:01:30 08:23:51-05:00, 2013:03:05 14:13:18-05:00, 2013:03:05 14:13:18-05:00, 2013:06:12 10:16:55-04:00, 2013:06:12 10:16:55-04:00, 2013:06:12 10:47:05-04:00, 2013:06:13 06:58:40-04:00, 2013:06:13 07:05:33-04:00, 2013:06:13 07:12:04-04:00, 2013:06:13 07:16:15-04:00, 2013:06:13 07:29:39-04:00, 2013:06:13 07:34:13-04:00, 2013:06:13 07:35:13-04:00, 2013:06:13 08:56:56-04:00, 2013:06:13 08:58:30-04:00, 2013:06:13 09:35:41-04:00, 2013:06:13 09:38:42-04:00, 2013:06:13 09:44:30-04:00
History Software Agent          : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Metadata Date                   : 2013:06:14 13:32:56-05:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.1)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9118 bytes, use -b option to extract), (Binary data 9473 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : 00x-xxxx-xx - Document Description: Product name
Creator                         : Midmark
Subject                         : Description, Midmark, Product Name
Doc Change Count                : 558
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: U399A408T2

Navigation menu