Miele Da 6296 W 36 Lumen Specification Sheet

: Miele Miele-Da-6296-W-36-Lumen-Specification-Sheet-748527 miele-da-6296-w-36-lumen-specification-sheet-748527 miele pdf

Open the PDF directly: View PDF .
Page Count: 3

Lumen Wall

Ventilation Hood

DA 6296 W

8mieleusa.com Note: Image shown is island version

Lumen Wall Ventilation Hood

DA 6296 W

FOREVER BETTER

DA 6296 W

Page 2 of 3

SPECIFICATIONS

DA 6296 W — Item 28629650USA

Vented or Recirculating 625 CFM setting

Canopy Dimensions 351/4” (895mm) W x 2” (52mm) H x

201/2” (520mm) D

Dimensions (Standard Height) - Vented 263/4” — 393/8” (680—1000mm) H

Dimensions (Standard Height) - Recirculating 317/8” — 441/2” (810—1130mm) H

Chimney Dimensions 113/8” (290mm) W x 105/8” (270mm) D

Minimum distance above cooktop Please refer to page 26 of the installation manual

Color Available in brushed stainless steel or RAL colors

Electrical

Electrical Requirements 120 V, 60 Hz, 15 Amps

Power Cord Molded plug 6.5 ft (2m) NEMA 5-15

Electrical Rating 369 W (Blower: 350 W; Lighting: 3x3 W;

Glass edge lighting: 10 W)

Optional Accessories

Recirculating Kit DUW 20 Recirculating Kit

OdorFree Charcoal Filter DKF 12-1 OdorFree Charcoal Filter

Reducing Collar (air flow max. 400 CFM)

Shipping

Shipping Weight 59 lbs (27kg)

Support

Call 800.843.7231

20/20 82020technologies.com

FEATURES

• NEW: LED ClearView lighting

• NEW: Con@ctivity — communication

between hood and cooktop

• Front mounted, backlit controls

• Four fan speeds (incl. intensive)

• Delayed shutdown for 5 or 15 minutes

• Dishwasher-safe metal lters

• Multi-colored LED glass-edge lighting

with four preset colors and a setting that

transitions through 196,000 colors with a

change sequence of 1 or 15 minute

intervals, enabling a favorite selection

• Polished stainless steel logo

• Stainless steel nish or RAL color options

PRODUCT VIEW

DA 6296 W

Page 3 of 3

Lumen Wall Ventilation Hood

DA 6296 W

FOREVER BETTER

PLEASE NOTE: The majority of the weight of the installed ventilation system will be supported

by the lower retaining plate. It must be rmly attached to the stud framing behind the drywall.

If studs are not available in the required locations, a plywood backing (min. ½” (13 mm) thick)

spanning at least two studs must be installed. Failure to adequately support the weight as

stated may result in the ventilation system falling off the wall, causing personal injury and

property damage.