Miele Hg02 Users Manual
HG02 to the manual 6760cfa0-3d97-439f-98b8-576dfd54f064
2015-01-24
: Miele Miele-Hg02-Users-Manual-222180 miele-hg02-users-manual-222180 miele pdf
Open the PDF directly: View PDF 
.
Page Count: 40
| Download | |
| Open PDF In Browser | View PDF |
Installation instructions Dishwasher To prevent accidents and machine damage, read these instructions before installation or use. UV M.-Nr. 05 690 921 Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . 5 Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Disposal of an old machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Product and Cut-out Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 1. Install the steam deflector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. Install the mounting brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3. Install the slide skis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4. Install the dishwasher under the countertop . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5. Level the legs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6. Install the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7. Align the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 8. Install the custom door panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 9. Secure the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 10. Adjust the door springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11. Make the plumbing connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 12. Make the electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 13. Test the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 14. Install the toekick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 2 IMPORTANT SAFETY INSTRUCTIONS Installation Installation, maintenance and repair work should be by a Miele authorized service technician. Work by unqualified persons could be a hazard and may void the warranty. This equipment is not designed for maritime use or for use in mobile installations such as caravans or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Technical Service Department with specific requirements. If there is any doubt concerning installation contact the Technical Service Department. USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca ,During the installation process, please be careful of sharp edges that can cause harm. Inspect the dishwasher for transport damage. Do not install or use a damaged unit. Contact the place of purchase. This dishwasher must be installed under a continuous countertop secured to adjacent cabinetry. Do not install this dishwasher beneath a cooking surface or oven. Do not, under any circumstances, cut the intake hose or submerge in liquid. This hose contains electrical components that could cause injury or property damage if cut or submerged. 3 IMPORTANT SAFETY INSTRUCTIONS Electrical safety Child safety Before installation, make sure the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent injury and machine damage. Consult a qualified electrician if in doubt. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damages caused by the lack, or inadequacy of, an effective grounding system Before installation or service, disconnect the power supply to the work area by manually "tripping" the circuit breaker, unplugging the unit, or removing the fuse. Do not use an extension cord to connect the unit to electricity. Extension cords do not guarantee the required safety of the appliance, (e.g. danger of overheating). 4 If the appliance is removed from its installation and will not be used, the door to the wash cabinet should be removed to prevent children from being locked in the machine. When discarding an old dishwasher, unplug it from the power outlet, remove the door to the wash cabinet and cut off the power cord. INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ Installation L’installation et les travaux de réparation et d’entretien doivent être effectués par un technicien de service autorisé Miele. Les travaux effectués par des personnes non qualifiées, pourraient être dangereux et faire annuler la garantie. Cet équipement n’a pas été conçu pour usage maritime ou pour les installations mobiles telles que les roulottes ou les avions. Toutefois, il peut être parfois possible de faire l’installation de ces applications sous certaines conditions. Veuillez contacter le Concessionnaire Miele le plus près de chez-vous ou le Département du service technique Miele pour leur donner vos exigences précises. Si vous avez des doutes au sujet de l’installation, contactez le Département du service technique Miele. USA 1-800-999-1360 techserv@mieleusa.com CDN 1-800-565-6435 service@miele.ca ,Durant le processus d’installation, veuillez faire attention aux rebords coupants qui peuvent blesser. Inspecter le lave-vaisselle pour voir s’il a été endommagé lors de l’expédition. Ne pas installer ou utiliser, un appareil endommagé. Veuillez contacter le point d’achat. Ce lave-vaisselle doit être installé sous un comptoir continu bien fixé aux armoires adjacentes. Ne pas installer ce lave-vaisselle sous une surface de cuisson ou un four. Ne jamais, sous aucunes circonstances, couper le boyau de prise ou submerger dans un liquide. Ce boyau contient des éléments électriques qui pourraient causer des blessures ou des dégâts matériels s’ils sont coupés ou submergés. 5 INSTRUCTIONS IMPORTANTES SUR LA SÉCURITÉ Sécurité électrique Sécurité des enfants Avant l’installation, s’assurer que la tension et la fréquence énumérées sur la plaque signalétique correspondent à la source d’électricité de la résidence. Ces données doivent correspondre afin d’éviter de vous blesser et d’endommager l’appareil. Consulter un électricien qualifié si vous avez des doutes. S’assurer de disposer de tous les emballages de plastique, sacs etc. et de les garder hors de la porté des bébés et jeunes enfants. Danger de suffocation! Pour garantir la sécurité électrique de cet appareil, il doit y avoir continuité entre l’appareil et un système efficace de mise à la terre. Ce critère de sécurité doit absolument être respecté. Si vous avez des doutes, faire vérifier le système électrique de votre maison par un électricien qualifié. Le fabricant ne peut pas être tenu responsable des dommages causés par un système de mise à la terre efficace, manquant ou inadéquat. Débrancher le courant de la zone de travail avant l’installation, en débranchant l’appareil, retirant le fusible ou en faisant "sauter" le disjoncteur. Ne pas utiliser de rallonge pour brancher l’appareil. Les rallonges ne garantissent pas la sécurité requise pour l’appareil, (par ex. danger de surchauffage). 6 Si l’appareil est retiré de son installation et que vous ne l’utilisez pas, vous devez retirer la porte du meuble de lavage pour empêcher les enfants de s’enfermer dans l’appareil. Pour disposer d’un ancien lave-vaisselle, le débrancher de la prise, enlever la porte du meuble de lavage et couper le cordon électrique. Caring for the environment Disposal of the packing material The cardboard box and packaging protect the appliance during shipping. These materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old machine Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibilty of recycling these materials. Ensure that the appliance presents no danger to children while being stored for disposal. Before discarding an old appliance, unplug it from the outlet and cut off its power cord and remove any doors to prevent hazards 7 Product and Cut-out Dimensions G 600 Series Dishwashers Full size models G 636 - G 698 Removing the leg extensions The black leg extensions can be removed to reduce the height of the machine to 32 1/4" - 33" (819 - 838 mm) (see Inset). A = Black leg extension (removable) B = White leg (must be installed on machine). ^ After removing the black leg extensions, screw the white legs onto the dishwasher. Machine heights of 33 1/4" - 34" (845- 864 mm) are not possible using the supplied legs. For this height range, or for heights greater than 34 7/8" (886 mm), extended legs (part # 02 702 601) are necessary. Contact the Miele Technical Service Department for the appropriate legs. 8 Product and Cut-out Dimensions G 800 Series Dishwashers Full size models G 836 - G 898 Machine heights of 35" - 37" (889 - 940 mm) can be obtained if the supplied legs are removed and extended legs are attached. Contact the Miele Technical Service Department for the appropriate legs (part # 02 702 601). Slimline models G 801 - G 832 9 Product and Cut-out Dimensions Prefinished models Machine heights between 35" and 37" (889 - 940 mm) can be obtained if the supplied legs are removed and extended legs are attached. Please contact the Miele Technical Service Department for the appropriate legs (part # 02 702 601). ,To ensure stability, this dish- washer should only be installed under a continuous countertop and securely fastened. 10 Installation 1. Install the steam deflector A stainless steel steam deflector is supplied to protect the countertops from steam and condesation when the dishwasher is opened. If the countertop is made of Corian®, granite, marble or other solid, waterproof material, the steam deflector is not required. If the counter is made of different materials, the steam deflector should be positioned so that it covers the edge where the materials are joined. Countertops with wood or laminate edging should be tacked through the rear holes of the steam deflector. ^ Squeeze a bead of silicone sealant from the supplied tube into the ridge formed by the curved edge, a, of the steam deflector. ^ Line up the steam deflector, b, with the lower front edge of the countertop and use the supplied tacks to secure. ^ Wipe off any excess silicone with a rag. The "Extended drying" feature can be activated to further protect the counter from condensation. See the Operating instructions / Additional features. 11 Installation 2. Install the mounting brackets 3. Install the slide skis To ensure stability, this dishwasher should be securely attached to the countertop with the two mounting brackets included. Two slide skis are included and should be installed on the feet of the dishwasher before the machine is pushed under the countertop. This will allow the machine to slide easier, protect the floor, and allow adjustment of the rear leveling legs from the front of the machine. ^ First, adjust the height of the legs so that the top of the dishwasher is roughly 1/8" (3 mm) below the countertop. Tipping the machine slightly to the rear, if possible, will make adjusting the front legs easier. Make sure the machine is level when adjustments are complete. ^ Insert the tab of each bracket into the guide holes on the top of the dishwasher. Stone or marble countertops: Do not install these mounting brackets if the counter is made of an extremely hard material. The securing screws for the mounting brackets are not suitable for such materials. ^ Place the skis, with the ratchet at the rear, under the dishwasher legs. 12 Installation 4. Install the dishwasher under the countertop The dishwasher must be installed so that the water and electricity supplies can be accessed through an adjacent cabinet. The supplies must not be located behind the machine. The floor of the cut out where the dishwasher will be installed should be even in height with the surrounding kitchen floor. Plywood can be secured to the floor to make the two areas even. ^ Slide the machine into the opening, making sure the electrical cable and hoses can reach their connection points without kinking. The drain hose connection at the rear of the dishwasher can be turned to allow the hose to be angled to the right or left. Exercise care when sliding the dishwasher in or out, to prevent damaging the power cord or hoses. ^ Make a 2" x 4" (5 x 10 cm) cut out in the side or bottom of the cabinet adjoining the dishwasher. This cut out is necessary for connections to pass through. ^ Make certain that there are no rough edges that could damage the power cord or hoses. If metal cabinets are used, place the supplied rubber grommet around the edge of the opening before passing the cable through. 13 Installation 5. Level the legs ^ The rear leveling legs can be adjusted with a T20 Torx screwdriver by turning the screws at the front of the slide skis. To raise the machine turn clockwise. To lower the machine turn counter clockwise. Several turns may be needed to set the correct height. Do not use a power screwdriver. ^ Adjust the front leveling legs by pushing on the feet with a slotted screwdriver. ^ Tipping the machine slightly backwards, if possible will make adjusting the front legs easier. Make sure the machine is level when adjustments are complete. The dishwasher should be raised until it just touches the underside of the countertop. If you are installing a prefinished unit dishwasher proceed to step 9. If you are installing a factory made door panel (GDU Decor Set), refer to the instruction manual enclosed with the panel at this time. 14 Installation 6. Install the control panel Dishwashers with a selector knob ^ Press the "On/Off" button in and place the cover, a, over the push button. ^ Insert the drying vent grill (if applicable), b, into its opening. ^ Position the control panel, c, and fasten it from the inside of the door, d, using the six screws provided. ^ Align and press the knob onto its shaft, e. 15 Installation Dishwashers with insertable push buttons ^ Press the "On/Off" button in and place the cover, a, over the push button. ^ Insert the drying vent grill, b, into its opening. 16 ^ Position the control panel, c, and fasten it from the inside of the door, d, using the six screws provided. ^ Insert the other button covers, e and f, into their openings. Installation Dishwashers with fixed push buttons ^ Press the "On/Off" button in and place the cover, a, over the push button. ^ Push the drying vent grill, b, into its opening. ^ Position the control panel, c, and fasten it from the inside of the door, d, using the six screws provided. 17 Installation 7. Align the control panel The control panel should be aligned with the drawer fronts of the adjoining kitchen cabinets by adjusting the filler strips. ^ After adjusting the control panel height, cut off the plastic screw excess. Control Panel Height 4 1/2" control panel with(112 mm): out filler strips, 5 3/4" (145 mm): control panel with four filler strips, 6" (154 mm): using a fifth filler strip (optional accessory). Part numbers for additional filler strips ^ Using an 8 mm socket, turn the nut clockwise or counterclockwise until the filler strips line up with the drawer line. If necessary, individual or all of the filler strips can be removed. ^ To remove the filler strips from the control panel, place the panel printed side up, and gently push down near the bottom of the control panel. This will release the mounting bolts from their slots. 18 Color Full size Slimline white 4 047 341 4 312 770 black 4 047 361 4 312 780 Stainless Steel 3 280 742 3 298 210 4 316 721 Installation 8. Install the custom door panel A custom door panel matching the kitchen cabinetry can be installed using the provided templates and bracket. As long as the panel length calculated is within the Range of Panel Sizes listed, the custom panel should fit without a problem. Range of Panel Sizes G 636 - G 698 Length: Width: 19" - 23 3/4" (483 - 603 mm) 23 1/2" (598 mm) G 801 - G 832 Length: Width: 21" - 25 3/4" (533 - 654 mm) 17 1/2" (445 mm) G 836 - G 898 Length: Width: 21" - 25 3/4" (533 - 654 mm) 23 1/2" (598 mm) X = Panel length A = Height to the underside of the countertop B = Control panel height* C = Toe Kick Height Note: The maximum panel length is only applicable when no filler strips are used. The door panel thickness should be 3/4" (19 mm). Length X: Determined using the following calculation: X = A – B – C Custom door panels should be finished on all edges. Trim kits are not available for custom door panels. *Control panel height is determined by the height of the drawers in the cabinets. This height is adjustable between 4 1/2" and 5 3/4" (112 - 145 mm) with the filler strips provided. An additional filler strip and foam inserts may be ordered to reach 6" (154 mm) in height. 19 Installation Maximum panel weight A custom door panel must not exceed the listed maximum weight. An overweight panel will distort the door springs causing the dishwasher door to fall when opened. G 600 door panel G 800 door panel Plastic control 13 lbs panel (5.9 kg) 12 lbs (5.5 kg) Stainless Steel 10.5 lbs control panel (4.8 kg) 9 lbs (4.1 kg) 20 Installation ^ Place a template on each end of the mounting bracket as shown, making sure the rule marks face the outside of the bracket. ^ Slide the bracket up or down until the oblong holes on the machine door line up with the oblong holes on the template (shown in inset a). ^ Draw a line on each template that is even with the top edge of the adjacent cabinet door (inset b). ^ Remove the bracket from the door. ^ Place the door panel on a flat surface, good side facing down, taking care not to scratch the surface. Make certain that the bottom of the panel is closest to you. ^ Place the bracket on the back of the door panel and adjust it so that: ^ Hang the mounting bracket on the machine door. – the lines drawn on the templates align with the upper edge of the door panel. ^ Slide the top edge of the templates under the filler strips and control panel. – the mounting bracket is centered (left to right) on the door panel. 21 Installation ^ Tape the bracket to the door panel to hold it in place while the mounting holes are drilled. ^ Drill pilot holes for the screws using a 3 /32" (2.5 mm) bit. ^ Attach the bracket to the panel using the 6 screws provided. ^ Remove the templates. Save the templates for future use in case a new door panel needs to be installed. 22 Installation ^ Push up one side of the door panel until it touches the filler strips (or control panel if filler strips are not used) and lightly tighten the T20 Torx screws on the corresponding edge of the machine door. Do not use a power screwdriver. ^ Repeat the process with the other side of the door panel. ^ Shut the door. ^ Attach the panel to the dishwasher by aligning the bracket tabs with the slots on the door. ^ Check that the door panel is adjusted correctly. It should be snug at the top and neatly aligned with the cabinet doors and drawer lines. If it is not aligned properly, loosen the Torx screws and adjust the panel. Once the door panel is positioned correctly: ^ Open the dishwasher door. ^ Tighten all the Torx screws on the edges of the dishwasher door. ^ Use the provided caps to plug the locking screw access holes. ^ Open the dishwasher door slightly. If the locking screws on the edge of the dishwasher door can not be reached, the dishwasher will have to be pulled out of its opening a few inches. 23 Installation If the adjacent cabinetry (or appliance) does not have drawers and alignment to a drawer line is not possible: ^ Hang the bracket on the machine door, without the templates. Tighten the four locking screws on the edges of the door panel. ^ Close the door. ^ Measure the distance from the adjacent cabinet’s (or appliance) door bottom to the bottom of the mounting bracket (X). ^ Draw a line on the rear of the door panel (X) inches up from the bottom. 24 ^ Remove the bracket from the machine door and place it on the rear of the door panel so that: – the bracket is centered left to right, – the bottom of the bracket is aligned with the (X) line. ^ Tape the bracket to the door panel to hold it in place while the mounting holes are drilled. ^ Drill pilot holes for the screws using a 3 /32" (2.5 mm) bit. ^ Attach the bracket to the panel using the 6 screws provided. Installation ^ Push up one side of the door panel until it touches the filler strips (or control panel if filler strips are not being used) and lightly tighten the T20 Torx screws on the corresponding edge of the machine door. Do not use a power screwdriver ^ Repeat the process with the other side of the door panel. ^ Shut the door. ^ Attach the panel to the dishwasher by lining up the bracket tabs with the slots on the door. ^ Check that the door panel is adjusted correctly. It should be snug at the top and neatly aligned with the adjacent cabinetry. If it is not aligned properly, loosen the Torx screws and readjust the panel Once the door panel is positioned correctly: ^ Open the dishwasher door. ^ Tighten all the Torx screws on the edges of the dishwasher door. ^ Use the provided caps to plug the locking screw access holes. ^ Open the dishwasher door slightly. If the locking screws on the edge of the dishwasher door can not be reached, the dishwasher will have to be pulled out of its opening a few inches. 25 Installation 9. Secure the dishwasher ^ Open the dishwasher door. If the steam deflector is installed, the mounting bracket holes must align with the slots in the steam deflector. ^ Using flat head screws, secure the dishwasher to the countertop by screwing through both the mounting bracket and the steam deflector. 26 Make certain that the white rubber seal located at the top, outer edge of the dishwasher is tight against the bottom of the countertop. Do not drill any additional holes through any part of the wash cabinet. If in doubt on how to secure the dishwasher, please call Miele’s Technical Service Department. Installation For openings exactly 17 3/4" (45 cm) or 23 5/8" (60 cm) wide: ,The side mounting holes should only be used for securing the dishwasher if the opening is exactly 17 3/4" (45 cm) wide (slim line models) or 23 5/8" (60 cm) wide (full size models). Use of this method on larger openings can damage the machine and cause leaks. Be careful not to screw into an adjacent appliance. ^ Open the dishwasher door and remove the caps covering the mounting holes on the outer edge of the wash cabinet. ^ Fasten the dishwasher to the adjacent cabinets using the supplied screws and bushings. A bushing must be placed over the screw before inserting it into its mounting hole. ^ Tighten the screws and insert the caps. 27 Installation 10. Adjust the door springs ^ Open the dishwasher door halfway. If the door remains in this position when released, the springs are adjusted correctly. If the door drops, the tension on the springs needs to be increased. If it closes on its own, the tension on the springs need to be decreased. ^ To adjust the door springs use a T20 Torx or a small slotted screwdriver and turn the screw located behind the door in the upper front strip, on the left hand side of the dishwasher. Do not use a power screwdriver. – turn clockwise to increase the tension – turn counterclockwise to decrease the tension. 28 Note: If the door springs can not be adjusted enough (the door falls), the custom door panel is too heavy. Call your Miele dealer or Miele’s Technical Service Department for advice on stronger door spings. Installation 11. Make the plumbing connections An air gap is built into the water inlet system to prevent potable water from mixing with waste water. The dishwasher can heat its own water to the temperatures required by the wash program. This allows the option of connecting the machine to either a hot or cold water source. ^ For lowest energy consumption connect the dishwasher to a cold water source. ^ For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. Hot water supply specifications: New plumbing: The water inlet hose comes equipped with a 3/4" female hose thread connector. This can be directly connected to a shut off valve with 3/4" MHT (male hose thread ends). Preferred Installation: The hose assembly should be installed vertically so the hose exits from the bottom of the valve box (not as shown). If this is not possible, it can be installed horizontally, provided the hose exit remains beneath the main body of the valve box (see illustration). The valve box should also be installed so that it is at least 10" (24 cm) above the floor (or base of the cabinet), so that the excess coiled hose will remain lower than the valve box at all points. Recommended temperature: 120 °F (49 °C), max 140 °F (60 °C) Water pressure: Must be between 5 - 145 psi (0.3 -10 bar). If the water pressure is too low, the "Intake/Drain" or "Intake" indicator may flash (see Operating Instructions/ "Frequently asked questions"). If the water pressure is too high, a pressure reducer must be installed. 29 Installation Existing plumbing: If the standard 3/8" copper plumbing for a dishwasher already exists with a compression fitting and valve as pictured: ,Do not cut the intake hose. If the ^ Cut the 3/8" copper tubing after the valve. hose is cut, the dishwasher will not work. There will be a water leak and you could be injured. If the hose is too long, coil it neatly and place it behind the machine. ^ Install the 3/8" compression to 3/4" MHT (Male Hose Thread) adapter (supplied with the machine), as illustrated. Electrical wiring and components should not come into contact with any plumbing fixtures or hoses. ^ For any other size plumbing, purchase the correct size adapter from a hardware store. ^ Connect the inlet hose to the existing valve/adapter assembly. 30 Installation Drainage system specifications: The machine comes equipped with: – A 5 ft. long (1.5 m) flexible drain hose with an internal diameter of 7/8" (22 mm). Drain hose extensions can be ordered from Miele’s Technical Service Department. – A built-in swivel connector allowing the drain hose to be routed in any direction. – A built-in mechanical non-return valve on the discharge side to prevent waste water from flowing back into the dishwasher. – A built-in odor trap on the discharge side to prevent odors from entering the kitchen. Maximum drain height: 39" (1 m) Maximum drain hose length: 12 ft (3.5 m) Do not shorten the drain hose. Do not connect the drain hose to anything but a genuine Miele hose. Other hoses may melt or collapse. Connect the supplied drain hose to the drain pipe of the kitchen sink either: – above the P trap using the clamp provided, or – to the dishwasher connector of the garbage disposal. When connecting the drain hose to the garbage disposal, make sure to remove the knockout from the connection nipple. (See the disposal manufacturer’s instructions for this procedure.) 31 Installation Venting the drainage system Additional note If the dishwasher drain hose is connected to a floor drain or to a drain pipe that is less than 8" (20 cm) above the floor, the drain must be vented. Otherwise the water inside the dishwasher may siphon out during the wash program. Since all Miele dishwashers are equipped with an odor trap and nonreturn valve, the drain hose can be connected directly to the drain pipe as illustrated. To vent the drain: If plumbing codes require an external air gap on the discharge side of the dishwasher, the following requirements must be met: ^ Open the dishwasher door and remove the lower basket. – No part of the drain hose should be higher than 39" (1 m). – If installed horizontally, the drain hose can be up to 12 ft (3.5 m) long. If the drain hose is angled upwards in any way, it cannot be longer than 5 ft (1.5 m). – The drain connection should be made as close as possible to the dishwasher. – The internal diameter (7/8" or 22 mm) of the drain hose should not be reduced at any point. ^ Cut off the vent cap located at the right rear of the triple filter system, as illustrated. 32 Installation 12. Make the electrical connection GROUNDING INSTRUCTIONS THIS APPLIANCE MUST BE GROUNDED. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for the electrical current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. Specifications The dishwasher comes equipped with a 4 ft (1.2 m) power cord with a molded plug for connection to 120 V, 60 Hz, 15 A grounded receptacle. Rated load:. . . . . . . . . . 12.5 A / 1500 W Voltage: . . . . . . . . . . . . . . . . . . 120 VAC Frequency: . . . . . . . . . . . . . . . . . . 60 Hz Circuit breaker:. . . . . . . . . . . . . . . . 15 A ,Improper connection of the equipment grounding conductor can result in electric shock. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician. If there is any question concerning the proper electrical connection or grounding of this appliance to the power supply, please consult a licensed electrician or call Miele’s Technical Service Department: USA 1-800-999-1360 CDN 1-800-565-6435 33 Installation Power outlet Permanent Connection (Hard Wiring) The power outlet for the appliance must be installed within a cabinet, on a wall adjacent to the undercounter space in which the dishwasher is located. An opening through the partition between the compartments of 1 1/2" (3 to 4 cm) can be made to allow the plug to pass through. For hard wiring, the power cord must be disconnected from the terminal box located at the lower left front of the dishwasher, behind the toekick and service panel. Pass the permanent power supply cable through the strain relief and secure it to the terminal box. Connect: L1 (Black) to L on terminal block N (White) to N on terminal block GRND to ground connector GROUNDING INSTRUCTIONS This appliance must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the appliance. Use copper conductors only. ,Hardwiring the dishwasher should only be done if required by local electrical codes, and then in accordance with those codes. Do not cut the plug off the power supply cord and connect it directly to the house wiring. 34 Installation 13. Test the unit Once the dishwasher is level and secured it should be tested. ^ Remove all packing and literature from inside the unit. ^ Check for any leaks, odd noises and flashing / lit fault indicators on the control panel. See the "Operating Instructions / Frequently asked questions" if there is a problem. The yellow Child Safety Lock key hung on the upper basket must be removed before operating the dishwasher. If not removed, the key could become lodged in the circulation pump. ^ Make sure the triple filter system in the base of the wash cabinet is locked in place. Turn the handle clockwise to lock. ^ Close the soap dispenser. Do not add detergent. ^ Run the dishwasher through the "Rinse & Hold" program. See the operating instructions for information on operation and program selection. 35 Installation 14. Install the toekick For installations using a continuous toekick or a cabinet matching toekick Before installing the toekick, measurements must be taken to ensure that the toekick will not interfere with the complete opening of the dishwasher door. If the door panel hits the toekick when the dishwasher door is opened, the toekick must be cut shorter or recessed deeper. Note: If a decorative or flush mount toekick is desired, and (R) is less than 3/4" (19 mm), other modifications, such as beveling the top rear edge of the toekick, may be necessary. It is extremely important that the toekick is removable in case service is needed. The door panel overhang (P), and toekick depth of recess (R), determine the maximum dishwasher toekick height (H). If (H) is equal to or less than the toekick height of the adjoining cabinets, no interference will exist, provided that (R) is at least 3/4" (19 mm). 36 Installation For installations using the included plastic toekick G 600 Series dishwasher G 800 Series dishwasher and "U" model ^ Insert the mounting bracket with the flange pointing toward the center of the machine. ^ Insert the mounting bracket with the flange pointing toward the outside of the machine. ^ Push the mounting brackets in as far as possible by releasing the tension on the spring clip (see illustration). ^ Push the mounting brackets in as far as possible by releasing the tension on the spring clip (see illustration). 37 Installation The included toekick will fit without modification if the machine is set to its maximum height and the toekick is recessed as far as possible (4" / 10 cm). If the machine height is less than maximum, or if the toekick is not recessed 4" (10 cm), the toekick must be shortened. ^ Screw the toekick onto the installed brackets, with the cutting lines towards the top, and pull out evenly and slowly until it aligns with the toekick of the adjoining cabinets. The rear of the toekick has two cutting lines. 38 The toekick can not be pushed back in once it has been extended. It must be unscrewed, so that the tension on the spring clips can be released. The brackets can then be pushed in, and the toekick reattached. Installation ^ Carefully open the dishwasher door until it hits the toekick. ^ Using the front lower edge of the door panel as a guide, draw a line across the toekick. ^ Unscrew and remove the toekick. ^ If one of the cutting lines is close to the line just drawn, score the front of the toekick, and snap off the excess, otherwise, trim the toekick along the line using a saw. ^ Screw the toekick back onto the brackets, with the cut edge at the bottom. ,After installation, carefully open the dishwasher door to check that the front panel does not hit the toekick. If it does, remove the toekick and trim it accordingly. 39 Alteration rights reserved (NovoplusB,P,S) / 2702 This bio-friendly paper was bleached without the use of chlorine. M.-Nr. 05 690 921 / V00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2002:07:02 10:02:24 Producer : Acrobat Distiller 4.05 for Windows Modify Date : 2002:07:02 10:02:25-04:00 Page Count : 40EXIF Metadata provided by EXIF.tools